Scribd
Upload
203 views1 page

SHS 120x120x4

The document provides detailed cross-section properties for a square hollow section (SHS) with dimensions 120x120x4 mm. Key properties include a sectional area of 18.10 cm², an area moment of inertia about the y-axis of 402.00 cm⁴, and a weight of 14.2 kg/m. Additional metrics such as plastic section modulus, torsional constants, and ultimate resistance to axial force are also included.

Uploaded by

Simona Kosteska
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
203 views1 page

SHS 120x120x4

The document provides detailed cross-section properties for a square hollow section (SHS) with dimensions 120x120x4 mm. Key properties include a sectional area of 18.10 cm², an area moment of inertia about the y-axis of 402.00 cm⁴, and a weight of 14.2 kg/m. Additional metrics such as plastic section modulus, torsional constants, and ultimate resistance to axial force are also included.

Uploaded by

Simona Kosteska
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

 Cross-Section Properties

SHS 120x120x4
Geometry
Depth h 120.0 mm
SHS 120x120x4
 --
Thickness t 4.0 mm
 Macsteel
Outer corner radius ro 8.0 mm 120.0

Inner corner radius ri 4.0 mm


4.0
Depth of straight portion of web d 104.0 mm
4.0

Sectional Area
A

120.0
Sectional area 18.10 cm
y

Bending
Area moment of inertia about y-axis Iy 402.00 cm
Polar area moment of inertia Ip 804.00 cm
Radius of gyration about y-axis iy 47.1 mm z

Polar radius of gyration ip 66.6 mm

Maximum statical moment of area about y-axis max Sy 19.58 cm


Elastic section modulus about y-axis Wy 67.00 cm

Shear
Shear area in y-direction Ay 7.83 cm

Torsion
Torsional constant It 637.00 cm
Torsional constant (St. Venant) It,StVen 0.97 cm
Torsional constant (Bredt) It,Bredt 636.03 cm
Secondary torsional constant It,s 1.00 cm
Section modulus for torsion Wt 100.75 cm

Warping
Warping ordinate with respect to shear center max ω 0.61 cm
Warping constant with respect to shear center Iω 2.38 cm
Warping radius of gyration with respect to shear center iω 0.5 mm

Warping section modulus with respect to shear center Wω 3.87 cm


Maximum warping statical moment with respect to shear center max Sω 0.46 cm

Plasticity
Plastic section modulus about y-axis W pl,y 78.30 cm
Plastic section modulus of webs about y-axis W pl,y,webs 21.63 cm
Plastic section modulus of flanges about z-axis W pl,z,flanges 28.80 cm
Plastic shape factor about y-axis αpl,y 1.169 --

Plastic shear area in y-direction Apl,y 9.28 cm


Plastic limiting axial force Npl 426.420 kN

Plastic limiting shear force in y-direction


Vpl,y 125.909 kN

Plastic limiting bending moment about y-axis Mpl,y 18.40 kNm

Other
Ultimate resistance to axial force Nu 426.420 kN
Weight G 14.2 kg/m
Surface area per unit length Am 0.466 m /m
Volume V 1810.00 cm /m
Section factor Am/V 257.605 1/m

Cell area Acell 134.25 cm

You might also like