1 2 3 4 5 6 7 8
A Perforated Cable Tray with Cover
2500
20.0 H
Slot Size: 20 x 10
10.0
W
Cable Tray Cover
CC
C
T
A-A TOP VIEW CC
Slot Size: 20 x 10
2 Ø10 - Holes SIDE VIEW for above
135.0 150mmH Cable Trays
D
70 40.0 40.0 75
NOTE:
1. Finish: Tray :Hot Dip Galvanized as Per I.S: 2629
17.5 25.0 50.0 25.0 17.5 CPT Cover : Pre Galvanized confirming to IS 277.
25.0 25.0 2. MS Sheet confirming to IS 1079/2062
Coupler Plate Details for 150mmH Cable Trays 3. All Dimensions are in"mm".
Section A-A For 4. Tolerance : I.S. 1852.
E 5. Two Coupler Plates to be provided one each
Width Height Thk Thk CoverCollar Cover Thk Length Qty 150mm Height Trays
(Mtr's) on either side of Tray
(W) (H) (T) (CPT) (CC) (CT) (L)
6. Galvanizing thickness as per IS 4759.
2 2500 1350
PATNY SYSTEMS PVT LTD.
300 150 2 2 15 An ISO 9001-2000 Certified Company
Mfg.Of Cable Trays,Gratings & Earthing Materials
To:M/S. K Kumar Raja Projects (P) Ltd, Vizag.
F
5 4 3 2 1
ANNEXURE
VENDOR'S NAME & ADDRESS:
CUSTOMER:K KUMAR RAJA PROJECTS (P) LIMITED, VISAKHAPATNAM
ORDER NO: PO-5B-24-25-141 Dt:03.02.2025
PROJECT: RAMBILLI
TECHNICAL PARTICULARS - PERFORATED CABLE TRAYS
MATERIAL M.S SHEET CONFIRMING TO IS:1079/IS 2062
1
TYPE OF TRAY PERFORATED
2 LENGTH OF SINGLE CABLE TRAY 2500MM (+/- 10MM)
THICKNESS OF PERFORATED TRAY 2.0MM(+/- 0.3MM)
3
THICKNESS OF COUPLER PLATE 2.0MM(+/- 0.3MM)
4 FINISH HOT DIP GALVANISED AS PER IS:2629 & IS:4759
5 HEIGHT OF THE PERFORATED TRAY 150MM(+/- 3MM)
6 TOLERANCE AS PER IS 1852
7 ZINC COATING THICKNESS AS PER IS:4759
GALVANISATION UNIFORMITY OF ZINC
8 AS PER IS:2633
COATING
9 WEIGHT OF ZINC COATING 610 Gms / Sq.Mtr
10 AVERAGE ZINC COATING THICKNESS 86 MICRONS
11 PURITY OF ZINC CONFIRMING TO IS:209
ALONG WITH ONE CABLE TRAY - 2 NOS OF COUPLER PLATES.
12 COUPLER PLATE & HARDWARE FOR 150MM HEIGHT TRAY 12 NOS OF NUT, BOLT & WASHERS
M8 X 20 HEXAGONAL ELECTROPLATED HARDWARE
TECHNICAL PARTICULARS - COVERS
MATERIAL G.I PRE GALVANISED SHEET CONFIRMING TO IS 277
1
TYPE OF TRAY COVER
2 LENGTH OF SINGLE CABLE TRAY 2500MM (+/- 10MM)
3 THICKNESS OF COVER 2.0MM(+/- 0.3MM)
4 FINISH G.I PRE GALVANISED SHEET CONFIRMING TO IS 277
5 COVER COLLAR 15MM(+/-3MM)
6 TOLERANCE AS PER IS 1852
7 MINIMUM ZINC COATING THICKNESS 10 MICRONS
PLACE: SECUNDERABAD FOR PATNY SYSTEMS PVT LTD
DATE: 06.07.2025 AUTHORISED SIGNATORY
VENDOR'S NAME & ADDRESS: MANUFACTURING QUALITY PLAN QP.NO:PS/24-25/kkumarraja/01
CUSTOMER K KUMAR RAJA PROJECTS (P) LIMITED, VISAKHAPATNAM
ORDER NO: PO-5B-24-25-141 REV.NO:00 DATE: 06.02.2025
PROJECT RAMBILLI Dt:03.02.2025
PRODUCT PERFORATED CABLE TRAYS & COVERS PAGE 01 OF 01
REFERENCE ACCEPTANCE FORMAT OF AGENCY
SL.NO COMPONENTS CHARACTERISTS CLASS TYPE OF CHECK QUANTUM OF CHECK D* REMARKS
DOCUMENT NORMS RECORDS P W V
1.0 RAW MATERIALS & BOUGHT OUT ITEMS:
LAB
CHEMICAL ANALYSIS MAJOR CHEMICAL ONE PER LOT IS: 2062/1079 APPROVED DRG √ - - 2
REPORT
PERFORATED CABLE TRAYS
MECHANICAL
MAJOR MECHANICAL ONE PER LOT IS: 2062/1079 DO DO √ - - 2
PROPERTIES
A
LAB
COVERS CHEMICAL ANALYSIS MAJOR CHEMICAL ONE PER LOT IS : 277 APPROVED DRG √ - - 2
REPORT
ZINC CHEMICAL ANALYSIS MAJOR CHEMICAL DO IS: 209 IS: 209 DO √ - - 2
2.0 INPROCESS INSPECTION
VISUAL CHECK MAJOR VISUAL RANDOM APPROVED DRG APPROVED DRG LOG BOOK 2 - -
B PERFORATED CABLE TRAYS
DIMENSIONAL CHECK MAJOR DIMENSIONAL RANDOM IS: 1852 IS: 1852 LOG BOOK 2 - -
3.0 FINAL INSPECTION & TESTING
UNIFORMITY OF ZINC APPROVED DRG
CRITICAL CHEMICAL ONE PER LOT IS: 2633 T.C √ 2 2 1
COATING & GTP
MASS OF ZINC
CRITICAL CHEMICAL ONE PER LOT IS: 6745 DO T.C √ 2 2 1
COATING
C PERFORATED CABLE TRAYS
ADHESION TEST CRITICAL MECHANICAL ONE PER LOT IS: 2629 DO T.C √ 2 2 1
IS: 2629/
VISUAL / DIMENSION CRITICAL VISUAL RANDOM DO REPORT 2 2 1
APPROVED GTP
4.0 PRESERVATION & PACKING NOT APPLICABLE
LEGEND: P: PERFORM W : WITNESS V: VERIFICATION PREPARED BY: APPROVED BY: APPROVED BY
INDICATE 1 FOR CUSTOMER (OR) CUSTOMER NOMINATED INSPECTION AGENCY
2 FOR PATNY SYSTEMS PVT LTD
* FOR ITEM MARKED (√ (TICK) IN COLOUM ‘D’ TEST CERTIFICATES SHALL BE SUBMITTED TO FOR RECORDS
VENDOR'S SIGNATURE & STAMP SIGNATURE & STAMP CUSTOMER SIGNATURE & STAMP
