Motherboard User Manual
Version：V1.0
H310M-D M.2 V20
12 1
PS/2
CPU_FAN
+
2*U2.0 CPU_8P
JKB
HDMI ATX_PWR
LGA 1151
DDR4 DIMM1
DDR4 DIMM2
VGA
2*U3.2G1
4
FUSB3.0
LAN
+
2*U2.0
SATA_4
SATA_2
BATTERY
2 CHA_FAN
AUDIO
SATA_1
SATA_3
PCIe 3.0×16
PCIe 2.0
M.2_1
2280 2260 Intel R
H310
PCIe 2.0×1
CLR_CMOS
F_AUDIO COM ESPI_HEADER FUSB2.0 F_PANEL
JME SPEAK
5 8 11 9 3 10 7 6
Product Features
Intel H310 chipset, Supports 6th/7th/8th/9th Gen Intel® Core™ Processors,
Pentium® Gold and Celeron® Processors.
There is 1 PCIe 3.0 x16 slot, 1 PCIe 2.0 x1 slot and 1 M.2 SSD slot on this
motherboard, easily meet your expansion needs.
There are 6 USB ports at the rear, and 4 USB ports at the front can be expanded,
which can be connected to various devices at the same time.
With Gigabit LAN and a 5.1-channel audio which provides excellent performance
and experience.
Package Details
Please check if all thestandard accessories listed below are complete or not when
opening the packaging box of the motherboard.
Motherboard 1×H310M-D M.2 V20 motherboard
Connecting cable 1×SATA 6Gb/s cable
Other accessories 1×Rear Panel I/O Shield
User manual 1×User manual for motherboard
Rear I/O Interface
1G network
PS/2 interface interface
USB2.0 HDMI VGA USB 3.2 USB2.0 Audio
interface interface Gen 1 interface*
Type-A
(*Note: The blue in the audio interface is the audio input, the green is the audio output,
and the pink is the microphone interface)
Hardware Installation
You can scan the QR code on the right to obtain the official quick
operation guide for hardware installation provided by Colorful to
install it onto your PC quickly.
Product Specification
Chipset Intel® H310
Supports 6th/7th/8th/9th Gen Intel Core™, Pentium® and Celeron® processors
that fit the LGA 1511 slot of the motherboard
CPU
*Please visit the official website of Colorful (www.colorful.cn) for the latest supported
processor list
2 DDR4 memory slots, supporting up to 64 GB of memory (a single slot can
support a capacity of up to 32 GB)
●Support DDR4-2666/2400/2133MHz
Memory
●Support dual channel memory technology
*Please visit the official website of Colorful (www.colorful.cn) for the latest memory
compatibility list
1×PCIe 3.0 x16 slot
Expansion slots
1×PCIe 2.0 x1 slot
A total of 1 M.2 slot and 4 SATA 6Gb/s hard disk interfaces are supported
Storage device
●M.2_1 slot：support 2260/2280 specifications M.2 SSD
interfaces
（PCIe 2.0 x4，PCH channel）
4×USB 2.0 interfaces
2×USB 3.2 Gen 1 Type-A interfaces
1×HDMI 1.4 interface, up to 4K 30Hz resolution supported
Rear I/O interfaces 1×VGA interface
1×PS/2 interface
1×Gigabit network interface
3×Audio interfaces (audio input/audio output/microphone)
1×CPU fan pin (CPU_FAN)
1×System fan pin (CHA_FAN)
1×Front audio pin (F_AUDIO)
1×Front panel pin (F_PANEL)
Onboard 1×Speaker pin (SPEAK)
pin/jumper/key 1×COM port pin (COM)
1×Clear CMOS jumper (CLR_CMOS)
1×ME write protection jumper (JME)
1×POST card pin (ESPI_HEADER)
1×PS/2 Wake-up control jumper (JKB)
Front 1×USB 2.0 pin, support additional 2 USB 2.0 Type-A interfaces (FUSB2.0)
USB expansion 1×USB 3.2 Gen 1 pin, support additional 2 USB 3.2 Gen 1 Type-A interfaces
interfaces (FUSB3.0)
Realtek ALC897 High fidelity decoding chip
Audio
●Support up to 5.1 channels
Network function RTL8111H gigabit LAN controller
Dimension of M-ATX Form Factor
motherboard 226mm x 175mm
Pins and Jumpers
1 CPU fan pin (CPU_FAN)
There is one 4-pin CPU fan pin on the motherboard. The socket comes
with a foolproof design, and the correct direction must be checked before
installation. The cooling fan with a speed control function can reduce the
temperature of the CPU and provide cooling function,improve CUP stability.
2 System fan pin (CHA_FAN)
The motherboard provides one 4-pin system fan sockets which has
foolproof design and please pay attention to the direction when
installing.The cooling fan with the rotating speed control function can
lower the temperature in the chassis and help the chassis to dissipate heat.
3 Front USB 2.0 pin (FUSB2.0)
There is one front USB 2.0 expansion pin on the motherboard, which can be
expanded to two USB 2.0 interfaces.
4 Front USB 3.2 Gen 1 pin (FUSB3.0)
There is one front USB 3.2 Gen 1 expansion pin on the motherboard, which
can be expanded to two USB 3.2 Gen 1 Type-A and it's compatible with USB
2.0 devices.
5 Front audio pin (F_AUDIO)
The audio interface on the front panel of the case can be connected to
the front audio pin through the audio cable in the case, allowing audio
input/output and other functions through the audio interface on the
front panel.
6 Front panel pin (F_PANEL)
PWR_Switch：Power switch，short connect to be power on.
Reset_Switch：Restart switch, short connect to restart the computer.
PWR_LED：Power indicator.The LED will light up when the power is on.
HD_LED： Hard disk indicator. The LED will light up when the hard disk
is accessing data.
7 Speaker pin (SPEAK)
Speaker pin can be used to connect speakers located in the case.
8 COM port pin (COM)
The COM port pin can be used to connect the COM port module. First,
connect the data cable of the COM port module to the COM port pin, then fix
the module in the vacant slot on the rear panel of the case to connect the
COM port device.
9 Clear CMOS jumper (CLR_CMOS)
Clear CMOS jumper can be used to clear data in the CMOS memory of the motherboard. In
CMOS memory it stores the BIOS setting parameters and is powered by the battery on the
main board independently. If you need to clear CMOS data, first turn off the computer and
unplug the power cord, insert the jumper cap onto the CMOS pin, and make the two pins
Short connect the feet for 5 seconds, then pull out the jumper cap, wait for 5
minutes, and then start the computer to enter the BIOS Reset BIOS parameters.
10 ME write protection jumper (JME)
The ME write protection jumper is used to control whether the BIOS firmware
can be written. When the ME jumper is short-circuited, the BIOS write
protection function is disabled. At this time, the BIOS can be updated.
11 POST card pin (ESPI_HEADER)
The POST card pin can be used to connect the motherboard POST card and analyze the
cause of motherboard failure according to the code displayed on the POST card.
12 Wake-up control jumper (JKB)
The PS/2 wake-up control jumper can control whether the PS/2 interface can
use the PS/2 wake-up function in the BIOS. When the motherboard jumper cap
is inserted at pin ② and pin ③, the PS/2 wake-up function is in the hardware
disabled state,regardless of BIOS cannot be waked up using PS/2 device when
it is turned on or off.When the motherboard jumper cap is inserted in pin ①And
pin ②, the hardware supports PS/2 wake-up function. Turn on PS/2 wake-up
in BIOS, you can use the system wake-up function normally through the PS/2
keyboard and mouse.
Driver Installation
You can visit the official website of Colorful (http://www.colorful.cn), search for the
product model, and find the corresponding driver in the technical support list to
download.The onboard LAN Driver can also be downloaded by scanning the QR code
below.
H310M-D M.2 V20
BIOS
Every time a new motherboard is released, its motherboard BIOS will also be
updated iteratively. The main function of such a process is to support the latest
released hardware, optimize its compatibility with the released hardware, improve
its running stability, or support new BIOS functions.
● There are potential risks in updating the BIOS program. If your computer works
normally, we do not recommend that you update the BIOS program.
● If you need to update BIOS, please read this operation guide carefully and operate
under the guidance of professionals to avoid system damage or data loss due to
improper operation.
● If you need a more detailed BIOS program update procedure,
please scan the QR code on the right to download the official
BIOS update guide of Colorful.
Service and Support
Please visit the official website of Colorful, click the Service and
Support, or directly scan the QR code on the right, you can check
our services, warranty regulations and download support
provided by Colorful.
Shenzhen Colorful Yugong Technology Development Co., Ltd.
Official website: https://www.colorful.cn
Technical service hotline: 400-678-5866
Address: 13th Floor, Building 1, Shenzhen New Generation Industrial Park, No. 136, Zhong
kang Road, Meidu Community, Meilin Street, Futian District, Shenzhen
Copyright and Notice:
The copyright of this motherboard manual belongs to Colorful. Colorful does not guarantee
the complete accuracy of the content of this manual. In case of any ambiguity caused by
typographical or language errors, Colorful reserves the right to final interpretation and
modification. The trademarks and names mentioned in the manual belong to the companies
that have registered legally.
