GENENCARE® OSMS CC
C H O CO L AT E TA N
M OUSS E FO U N DAT IO N
Ref. E-12/W-0015/07
Phase Material Name INCI %
Cola Fax CPE-K1 Potassium Cetyl Phosphate 3,00
Ecorol 16/68f2 Cetyl Alcohol 2,00
Massocare SIL CM503 Cyclopentasiloxane 3,00
A
Massocare IPI 3
Isopropyl Isostearate 4,00
Massocare TH3 Triethylhexanoin 6,00
Massocare SIL PTM203 Phenyl Trimethicone 2,00
Demineralized water Water qsp
Palmera G995V4 Glycerin 3,00
B Cosphaderm X175 Xanthan Gum 0,20
Veegum Ultra6 Magnesium Aluminum Silicate 0,80
GENENCARE® OSMS CC7 Betaine 4,00
Soft-Tex Red Iron Oxide C33-77758 C.I. 77491 0,45
Soft-Tex Yellow Iron Oxide C33-77738 C.I. 77492 0,73
C
Soft-Tex Black Iron Oxide C33-77348 C.I. 77499 0,25
Soft-Tex TiO2 White C47-77568 Titanium Dioxide 1,00
Propylene Glycol, Diazolidinyl Urea, Methylparaben,
D Sharomix DMP9 1,00
Propylparaben
Suppliers
1
Colonial Chemical, 2 Ecogreen, 3 Cial. Química Massó, 4 KLK Oleo, 5 Cosphatec, 6 Vanderbilt, 7 IFF,
8
Sun Chemical, 9 Sharon Laboratories
Procedure Characteristics
1. G rind all pigments separately with the grinder for 5 minutes Aspect Tinted cream
for each one.
2. Mix xanthan gum + veegum ultra with glycerin.
3. Heat the water to 45–50ºC and add the mixture, mix during
20–30 minutes.
4. Heat the phase A and B [without BRB CM50] to 75–80ºC.
5. Disperse well phase C in phase B for 5 minutes (9.500 rpm)
(turrax).
6. Add phase A to phase BC in turrax for 3 minutes (9.500
rpm).
7. Homogenize phase ABC for 5 minutes (Silverson: 4.000
rpm).
8. Cool down to 40–45ºC whilst stirring slowly (200 rpm).
9. Add phase D and E to phase ABC keeping slowly stirring.
10. Allow to cool down to room temperature whilst stirring
slowly.
11. Adjust final pH to 5.50–6.00, if necessary.
Health & Biosciences
Home & Personal Care
©2021 International Flavors & Fragrances Inc. (IFF). IFF, the IFF Logo, and all trademarks and service
marks denoted with TM, SM or ® are owned by IFF or affiliates of IFF unless otherwise noted. The information
provided herein is based on data IFF believes, to the best of its knowledge, reliable and applies only to the
specific material designated herein as sold by IFF. The information contained herein does not apply to use
of the material designated herein in any process or in combination with any other material and is provided
at the request of and without charge to our customers. Accordingly, IFF cannot guarantee or warrant such
information and assumes no liability for its use. Other than as may be expressly set forth in a contract of
sale, IFF makes no warranty, express or implied, as to the material set forth herein, including the warranty of
merchantability or fitness for a particular use.
06.21.V1