SmartSolar Charge Controllers MPPT 100/30 & 100/50

www.victronenergy.com

Bluetooth Smart built-in: dongle not needed

The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.
VE.Direct
For a wired data connection to a Color Control panel, Venus GX, PC or other devices
Ultrafast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy
harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve.
Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP.
The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
The full output current up to 40°C (104°F).
Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight pre-programmed algorithms, selectable
with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage
for temperature.
Real-time data display options
- Apple and Android smartphones, tablets and other devices.
- Color Control panel.

SmartSolar Charge Controller MPPT 100/30 MPPT 100/50

Battery voltage 12/24V Auto Select
Rated charge current 30A 50A
Nominal PV power, 12V 1a,b) 440W 700W
Nominal PV power, 24V 1a,b) 880W 1400W
Maximum PV open circuit voltage 100V 100V
Max. PV short circuit current 2) 35A 60A
Maximum efficiency 98% 98%
Self-consumption 10 mA
Charge voltage 'absorption' Default setting: 14,4V / 28,8V (adjustable)
Charge voltage 'float' Default setting: 13,8V / 27,6V (adjustable)
Charge algorithm multi-stage adaptive
Temperature compensation -16 mV / °C resp. -32 mV / °C
Battery reverse polarity (fuse, not user accessible)
PV reverse polarity
Protection
Output short circuit
Over temperature
Operating temperature -30 to +60°C (full rated output up to 40°C)
Humidity 95%, non-condensing
VE.Direct
Data communication port
See the data communication white paper on our website
ENCLOSURE
Colour Blue (RAL 5012)
Power terminals 13 mm² / AWG6
Protection category IP43 (electronic components), IP22 (connection area)
Weight 1,3 kg
Dimensions (h x w x d) 130 x 186 x 70 mm
STANDARDS
Safety EN/IEC 62109-1
SmartSolar Charge Controller
1a) If more PV power is connected, the controller will limit input power.
MPPT 100/50 1b) The PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter the minimum PV voltage is Vbat + 1V.
2) A higher short circuit current may damage the controller in case of reverse polarity connection of the PV array.

Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands

General phone: +31 (0)36 535 97 00 | Fax: +31 (0)36 535 97 40
E-mail: [email protected] | www.victronenergy.com