Fosroc Dekguard Filler constructive solutions
Acrylic, intercoat pin hole filler
Uses Coating
Levelling and filling of intercoat pin holes and minor irreg- If Dekguard Primer* or Nitoprime DG* is to be used it must
ularities prior to the application of pigmented Dekguard be applied prior to applying Dekguard Filler. Dekguard Filler
topcoats. should be tightly trowelled onto the prepared surface ensur-
ing that all pin holes and defects are completely filled to pro-
Advantages duce a smooth even finish. It is essential that the material
is well worked into the surface in order to ensure maximum
Single component no mixing required.
adhesion and minimum thickness. Dekguard Filler can be
Easy to apply. applied to existing coatings. The surface of the existing coat-
ing has to be cleaned and abraded. In order to determine if
Can be applied to vertical surfaces without slumping.
Dekguard Filler is compatible with the existing coating it may
be necessary to carry out adhesion tests.
Description
Excellent adhesion of the topcoat will be achieved provided
Dekguard Filler, an external quality filler is based on acrylic
that the Dekguard Filler surface is not contaminated. Where
resin and fine fillers.
contamination does occur, e.g. from general dust or cement
It has been specially developed for use with the Dekguard debris, then this should be removed prior to overcoating.
concrete protection system.
Cleaning
Technical support Tools and equipment should be cleaned with water immedi-
ately after use.
Fosroc offers a comprehensive technical support service to
specifiers, end users and contractors. It is also able to offer
Estimating
on-site technical assistance, an AutoCAD facility and dedi-
cated specification assistance in locations all over the world. Pack Size
Dekguard Filler : 18 litre pack
Properties
Coverage
Form : Single component white
Coverage of Dekguard Filler is wholly dependent upon
paste
surface conditions, site trials are therefore recommended to
Bulk density : 1500 kg/m3
ascertain actual usage on uneven substrates.
Application
temperature : 5 to 40°C
Storage
Overcoating time : 12 hours minimum
Shelf life
Instructions for use Dekguard Filler : 6 months
Store Dekguard Filler upright in unopened original containers
in cool dry conditions. Storage outside these guidelines will
impair shelf life.
Dekguard Filler
Fosroc Dekguard Filler
Precautions Additional Information
Health and safety Fosroc manufactures a wide range of complementary prod-
ucts which include :
Wear suitable protective clothing, gloves and eye protection.
The use of barrier creams provide additional skin protection. waterproofing membranes & waterstops
In case of contact with eyes, rinse immediately with plenty of
joint sealants & filler boards
clean water and seek medical attention immediately. If swal-
lowed seek medical attention immediately - do not induce cementitious & epoxy grouts
vomiting.
specialised flooring materials
Fire
Fosroc additionally offers a comprehensive package of prod-
Dekguard Filler is non-flammable ucts specifically designed for the repair and refurbishment
of damaged concrete. Fosroc’s ‘Systematic Approach’ to
concrete repair features the following :
hand-placed repair mortars
spray grade repair mortars
fluid micro-concretes
chemically resistant epoxy mortars
anti-carbonation/anti-chloride protective coatings
chemical and abrasion resistant coatings
For further information on any of the above, please consult
your local Fosroc office - as below.
* Denotes the trademark of Fosroc International Limited
†
See separate data sheet
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the Supply of
Goods and Service. All Fosroc datasheets are updated on a regular basis. It is the user’s responsibility to obtain the latest version.
Head Office
telephone: (+9714) 2039699 fax: (+9714) 2859649 email: [email protected]
Al Gurg Fosroc LLC
Regional offices
Post Box 657, Dubai Abu Dhabi, Al Gurg Fosroc telephone: 673 1779 fax: 673 1449 email: [email protected]
Bahrain, YBA Kanoo telephone: 17738200 fax: 17732828 email: [email protected]
United Arab Emirates Kuwait, Boodai telephone: 4817618 fax: 4832124 email: [email protected]
Oman, Al Amana telephone: 24815080 fax: 24817554 email: [email protected]
www.fosroc.com Qatar, Tadmur telephone: 4432365 fax: 4419517 email: [email protected]
UAE/0097/00/E
