Scribd
Upload
8 views1 page

Narsindi Shibpur 2005 New Page48

The document details the specifications for providing and fixing retro-reflectorized traffic signs made of metal sheets, including their dimensions, materials, and installation requirements. It outlines the necessary components such as frames, pipes, and foundation specifications, along with the painting and finishing processes. The total quantity and cost for the work are also provided, indicating a comprehensive approach to the installation of informative traffic signs.

Uploaded by

khalilurrahman.suprbsd11
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views1 page

Narsindi Shibpur 2005 New Page48

The document details the specifications for providing and fixing retro-reflectorized traffic signs made of metal sheets, including their dimensions, materials, and installation requirements. It outlines the necessary components such as frames, pipes, and foundation specifications, along with the painting and finishing processes. The total quantity and cost for the work are also provided, indicating a comprehensive approach to the installation of informative traffic signs.

Uploaded by

khalilurrahman.suprbsd11
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SL Item Code Description of Work Unit Location / Length Width Height / Area / No of Total Qty Unit Amount

No Component Depth Volume Item of Works Rate


1 2 3 4 5 6 7 8 9 10 11 12 13

108. 3.12.04.4.A CRS-Plate: Providing and fixing of retro-reflectorized each Informative Sign 1.000 33.00 33.000
cautionary, mandatory and informatory sign as per standard (Rectangular)
drawing enumerated in Appendix-6 (type design for Traffic
Signs) made of 18 BWG M.S. sheet of equilateral 33.000 6607.12 218034.96
triangle/Circular/Rectangular plates of different sizes as
mentioned in the drawing fitted with MS
triangular/Rectangular frame of same size as plates by point
welding (frames made by thorough welding of
25mmX25mmX3mm MS angle covering all sides of the
plates and maximum 150mm center to center in the middle
of frames in each vertical & horizontal directions), Plates are
fitted with 75mm dia & 2.90mm thick MS pipes by
continuous welding, including cutting of MS angle at
touched point of MS pipe, including cost of providing
200mm long 4 nos. 12mm dia anchor bars be fitted at the
lower part of the GI pipes by welding, making finishing,
grinding and carrying to the working sites, the post firmly
fixed to the ground by means of properly deigned
foundation with cement concrete of minimum cylinder
crushing strength of concrete 17.0Mpa at 28 days of curing
(Suggested Mix Proportion 1:2:4), 60cm below the ground
level, the signs properly erect in correct position, true to
line and length, including two coats of painting with best
quality synthetic enamel paint of approved brand & printing
with retro-reflective paint of different approved colour, etc.
all complete in all respect as per approved drawing,
specification and direction of the Engineer-in-charge. Rate is
inclusive of cost of all materials, labour and all incidental
charges in this connection.
810mm X 480mm Rectangular (For Informative Sign)

Package Code : Shibpur-2005; February 2023 Print Date/Time: 06-Feb-2025 04:35 PM Page 48

You might also like