CONNECTING THE UCM6202: 1. Press “Down” or “OK” key to start browsing menu options.

2. Press “Down” to browse different menu options. Press “OK” to selec

SD Card Slot Reset WAN Port Ground
3. In the menu option, select “Back” to go back to previous menu.
4. The LCD will return to default display after being idle in menu for mo
seconds.

CONFIGURING THE UCM6202 VIA WEB GUI:

USB Port DC 12V 2LAN
x FXO
PortPort2 x FXS Port
1. Connect the computer to the same network as the UCM6202.
2. Ensure the UCM6202 is properly powered up and shows its IP addr
1. Connect one end of an RJ-45 Ethernet cable into the WAN port of the UCM6202. LCD.
1. Press “Down” or “OK” key to start browsing menu options.
2. Connect
SD the
Cardother
SlotendReset
of the Ethernet
WANcable
Port into the uplink port of an Ethernet 3. Open a web browser on the computer and enter the web GUI URL in
switch/hub. 2. Press “Down” to browse different menu options. Press “OK” to selec
Ground http(s)://IP-Address:Port
3. Connect the 12V DCTHE powerUCM6202:
adapter into the 12V DC power jack on the back of 3. In the menu option, select “Back” to go back to previous menu.
CONNECTING The default protocol is HTTPS and the default port number is 8089.
seconds.
the UCM6202. Insert the main plug of the power adapter into a surge-protected 4. The LCD will return to default display after being idle in menu for mo
power outlet. 4. The web GUI login page will show (see Figure below). The default u
and password for administrator are “admin”.
4. W
Wait
ait for the UCM6202 to boot up. The LCD in the front will show its hardware
USB Port
information when the boot process is 2done.
x FXS Port 5. For the detailed information to congure SIP Extensions, PSTN lines,
lines
and all the other system settings via web GUI, please download the
5. Once the UCM6202DC 12Vis successfully
2LAN
x FXO connected to network, the LED indicator for
PortPort user manual here:
W
WAN
AN in the front will be in solid green and the LCD shows up the IP address. 1. Connect the computer to the same network as the UCM6202.
http://www
http://www.grandstream.com/support
CONFIGURING .grandstream.com/support
6. (Optional) Connect PSTN lines from the wall jack to the FXO ports; connect 2. Ensure the UCM6202THE UCM6202
is properly powered upVIA WEBitsGUI:
and shows IP addr
1. Connect one (phone
analog lines end of an RJ-45
and Ethernet
fax) to cable
the FXS into the WAN port of the UCM6202.
ports. LCD.
2. Connect the other end of the Ethernet cable into the uplink port of an Ethernet http(s)://IP-Address:Port
3. Open a web browser on the computer and enter the web GUI URL in
switch/hub.
USING THE UCM6202 KEYPAD MENU:
3. Connect the 12V DC power adapter into the 12V DC power jack on the back of The default protocol is HTTPS and the default port number is 8089.
the UCM6202. Insert the main plug of the power adapter into a surge-protected
power outlet. 4. The web GUI login page will show (see Figure below). The default u
and password for administrator are “admin”.
4. Wait for the UCM6202 to boot up. The LCD in the front will show its hardware
information when the boot process is done. 5. For the detailed information to congure SIP Extensions, PSTN lines
LCD and all the other system settings via web GUI, please download the
5. Once the UCM6202 is successfully connected to network, the LED indicator for
Navigation user manual here:
WAN in the front will be in solid green and the LCD shows up the IPKeys
address.
analog lines (phone and fax) to the FXS ports. http://www.grandstream.com/support
6. (Optional) Connect PSTN lines from the wall jack to the FXO ports; LED
connect
Indicators

This product is covered by one or more of the U.S. patents (and

WAN LAN
LED LED
SD Card LED FXOUSB
LEDLED FXS LED foreign patent counterparts thereto) identied at www
www.cmspatents
.cmspatents

3 4 USING THE UCM6202 KEYPAD MENU:

Navigation
LCD

Keys
Indicators
LED

This product is covered by one or more of the U.S. patents (and

WAN LAN
LED LED
SD Card LED FXOUSB
LEDLED FXS LED foreign patent counterparts thereto) identied at www.cmspatents

34

https://www.manualpdf.cl/grandstream/ucm6202/manual?p=3 7/13/24, 1 51 p.m.

Página 1 de 1
: