Industrial Motors

Commercial &
Appliance Motors

Automation
Digital &
Systems
Energy
Transmission &
Distribution

WG20
Coatings

GEARED MOTORS

Up to 18,000 Nm

TECHNICAL
CATALOGUE
i

WG20
A NEW GENERATION
of Geared Motors
As one of the leading global manufacturers and solutions providers of drive technology, WEG’s aim was to expand its
extensive range of products by gear units produced in its own facilities. Perfect coordination of products throughout
the drive train has put WEG in a position to offer customers even more superior and efficient solutions.

Under the leadership of WEG Gear Systems (formerly known as Watt Drive Antriebstechnik), the challenge was to
develop a program which not only meets the current demands of the market, but also satisfied WEG’s high quality
requirements. The Group’s own centre of excellence for geared motors in Austria, part of the WEG Group since 2011,
can draw on more than 50 years of experience in development, production and sales of gear units and geared motors.

In order to satisfy the requirements of state-of-the-art geared motors the following market requirements were taken into
account during the development phase:

STANDARD MOUNTING DIMENSIONS

For users, the aim was to make the new range of geared motors as easy and simple to use as possible. To ensure
installation in an existing system or production line worked effortlessly without incurring unnecessary costs for
conversions, the developers decided to adapt the mounting dimensions of the new gear units to products already
established on the market. The objective: worldwide, easy and cost-effective interchangeability.

TORQUE TRANSMISSION
The gear units needed to be compact, efficient, robust and reliable. In order to achieve this goal a transmission had to
be designed which allows large ratio ranges in a two-stage model while being able to integrate easily into the new
design gear housing.

EFFICIENCY
Energy efficiency has always been of paramount importance to WEG. The aim here was to live up to this demand
when designing the new WG20 geared motors. This requires the perfect interaction of sophisticated technology and
exclusive use of high quality components.

WORLDWIDE USE
To meet the requirements of global mechanical and plant engineering, it was vital that the new geared motors can be
used worldwide, whilst maintaining a high level of flexibility for applications.

The aim was to combine these and other market-related considerations and incorporate them into the designs of the
geared motors, which are the perfect addition to WEG’s range of products.

The solution is WG20.

2 WG20 Gear Units and Geared Motors www.weg.net

 i

Features

Highly efficient In line with market Optimised design Less noise

www.weg.net WG20 Gear Units and Geared Motors 3

i

www.cat4cad.com

Easy product selection

The “cat4CAD®” product configuration tool makes it easy to interactively select products.
Comprehensive wizards, user-friendly navigation and many other extra features allow quick
configuration of the required drive.

ADVANTAGES
g
Extensive product library
g
Fast configuration of motors and geared motors
g
Creation of project files with comprehensive technical documentation
g
Easy modification of generated product data by means of the project file
g
Quick request times

FEATURES
g
The entire menu is available in many languages.
g
To-scale 2D/3D drawings and PDF and DXF dimension sheet drawings of the previously selected drive.
g
The 2D/3D data can be exported for use in standard CAD programs.
g
Comprehensive technical data sheets of the configured gear unit and motor at the click of a button.
g
The project file allows complete management of previously selected drives on one screen.
At the click of a button one can save or print this project file, create PDF and DXF dimension drawings
and send enquiries directly to our sales team.

SEE THE ONLINE VERSION AT www.cat4cad.com

DOWNLOAD THE OFFLINE VERSION AT www.weg.net/at/cat4cad

4 WG20 Gear Units and Geared Motors www.weg.net

WG20 - Gear units and Geared motors
up to 18000 Nm i
WG20 is the first geared motor range to be completely developed in-house at WEG.
It comprises helical, parallel shaft, helical bevel and helical worm gear units with torques between
50 and 18,000 Nm. Already the two-stage units excel with their large ratio range, as well as being
exceptionally efficient thanks to the sophisticated design. The light aluminium housings of the gear
units up to 600 Nm and the robust cast iron housings from 800 Nm provide a highly versatile and
reliable product, with a wide range of possible applications.

Helical gear units

C Nominal torque: 50 - 18000 Nm

Power range: 0.12 - 110 kW
Ratio range: 2.44 - 22,405.25

Parallel shaft gear units

F Nominal torque: 130 - 18000 Nm

Power range: 0.12 - 110 kW
Ratio range: 3.85 - 24,805.81

Helical bevel gear units

K Nominal torque: 110 - 18000 Nm

Power range: 0.12 - 110 kW
Ratio range: 3.82 - 14,005.40

Helical worm gear units

S Nominal torque: 130 - 1600 Nm

Power range: 0.12 - 9.2 kW
Ratio range: 5.17 - 460

www.weg.net WG20 Gear Units and Geared Motors 5

i

Table of Contents
Inhaltsverzeichnis
Drive calculation...........................................................................................................................................................................8
Thermal power limit....................................................................................................................................................................11
Input types.................................................................................................................................................................................13
Explosion-proof gear units and geared motors...........................................................................................................................15
Table of lubricants.......................................................................................................................................................................16
Lubricant expansion unit.............................................................................................................................................................17
Painting......................................................................................................................................................................................17
Degrees of protection.................................................................................................................................................................18

Helical gear units and

Helical geared motors C........................................................................................................... 19
Technical Data............................................................................................................................................................................20
General information....................................................................................................................................................................20
Selection tables - Geared motors...............................................................................................................................................29
Selection tables - Gear units.....................................................................................................................................................113
Dimension sheets Geared Motors.............................................................................................................................................159
Dimension sheets Input types...................................................................................................................................................197

Parallel shaft gear units and

Parallel shaft geared motors F................................................................................................ 203
Technical Data..........................................................................................................................................................................204
General information..................................................................................................................................................................204
Selection tables - Geared motors.............................................................................................................................................211
Selection tables - Gear units.....................................................................................................................................................279
Dimension sheets Geared Motors.............................................................................................................................................313
Dimension sheets Input types...................................................................................................................................................349

Helical bevel gear units and

Helical bevel geared motors K................................................................................................ 355
Technical data..........................................................................................................................................................................356
General information..................................................................................................................................................................356
Selection tables - Geared motors.............................................................................................................................................363
Selection tables - Gear units.....................................................................................................................................................425
Dimension sheets Geared Motors.............................................................................................................................................459
Dimension sheets Input types...................................................................................................................................................495

6 WG20 Gear Units and Geared Motors www.weg.net

 i

Helical worm gears and

Helical worm geared motors S....................................................................................................501
Technical data..........................................................................................................................................................................502
General information..................................................................................................................................................................502
Selection tables - Geared motors.............................................................................................................................................509
Selection tables - Gear units.....................................................................................................................................................531
Dimension sheets Geared Motors.............................................................................................................................................543
Dimension sheets Input types...................................................................................................................................................555

Modular System Motor........................................................................................................... 561

The modular motor system.......................................................................................................................................................563
The modular system motor.......................................................................................................................................................564
Type code.................................................................................................................................................................................565
Options....................................................................................................................................................................................566
General information..................................................................................................................................................................568
General information - IE4 motors..............................................................................................................................................569
Electrical basic data..................................................................................................................................................................577
Dimension sheets.....................................................................................................................................................................590
Motor modules.........................................................................................................................................................................595
High / Low temperature execution........................................................................................................................................595
Temperature control..............................................................................................................................................................595
Anti-condensation heating.....................................................................................................................................................595
Climatic protection................................................................................................................................................................596
Drain.....................................................................................................................................................................................596
Terminal box designs.............................................................................................................................................................596
Brake system and Back stop................................................................................................................................................599
Encoder systems..................................................................................................................................................................610
Ventilation systems................................................................................................................................................................613
Additional modules................................................................................................................................................................615
Standards.................................................................................................................................................................................616

Disclaimer
This catalogue contains information (descriptions and characteristics), which do not always apply as described in case of
actual use. Data can also change due to product development. Characteristics are only binding if explicitly agreed to in the con-
tract. Delivery opportunities and technical modifications subject to change without notice.

www.weg.net WG20 Gear Units and Geared Motors 7

 Drive calculation
1. Drive power
The required total power is divided into static and dynamic components. The static power is the component at constant speed
i (friction and lifting force). The dynamic component is the power for accelerating and decelerating of masses.
The selected rated motor power (PN) must be bigger than the required static drive power. The required total power can be big-
ger than the rated motor power but it must be smaller than the maximum motor power.

Formula Unit

Output speed of the gear unit n2 =n2vπ=

∙ 30v · 30
∙ r π· r [min-1]

Static drive power

Linear movement m·g·μ·v

Horizontal movement Pstat = 1000 · η
[kW]
(conveyor, travel drive)

m · g · v · (sinα + μ · cosα)
Inclined movement
(inclined conveyor, travel drive with inclination)
Pstat = 1000 · η
[kW]

m·g·v
Vertical movement
(lifting drive, hoist, bucket elevator)
Pstat = 1000 · η
[kW]

Pstat · 9550
Static output torque M2stat = n2
[Nm]

Dynamic drive power (acceleration/deceleration power)

m ∙ v2
Horizontal movement Pdyn,A,(B) = 1000 ∙ tA,(B) · η)
[kW]

∑Jred. ∙ n12
Rotary motion Pdyn,A,(B) = 9,12 ∙ 104 ∙ tA,(B) · η
[kW]

∑Jred. ∙ n1
Starting resp. braking time tA,(B) = 9,55 ∙ (MA,(B) ± ML)
[s]

Minimum starting time against slipping tAmin = μ v· g 0

[s]

M2stat
Load torque of motor ML = i
[Nm]

Starting power PA = Pdyn,A + Pstat [kW]

Braking power PB = Pdyn,B ± Pstat [kW]

PA,(B) ∙ 9550
Starting / braking torque M2,A,(B) = n2
[Nm]

+ML for braking when the load acts braking (e.g. lifts when going up)
-ML for starting or for braking when the load acts accelerative (e.g. lifts when going down)

8 WG20 Gear Units and Geared Motors www.weg.net

 Mass moments of inertia

External load moments of inertia have to be reduced onto the motor shaft by squared ratios.
i
Jex
Reduced mass moment of inertia Jex.red. = i2
[kgm²]

Solid cylinder

Jex.red. = 98,2 · ρ · l · da4 · ( nn )2 x

1
[kgm²]

Hollow cylinder

Jex.red. = 98,2 · ρ · l · (da4 - di4) · ( nn )2 x

1
[kgm²]

Linear movement

Jex.red. = 91,2 · m · ( nv )2 1
[kgm²]

Approximate values for friction coefficients:

Rolling friction: μr = 0.005 - 0.02 steel/steel Friction coefficient for conveyors:

μr = 0.02 - 0.06 plastic/steel μr = 0.13 10 m conveyor length
μr = 0.06 - 0.2 rubber/steel μr = 0.08 25 m conveyor length
μr = 0.06 50 m conveyor length
Static friction: μ0 = 0.15 steel/steel μr = 0.05 100 m conveyor length

Designation Unit Description Designation Unit Description

da [m] Outside diameter ML [Nm] Load torque of motor

di [m] Inside diameter n1 [min-1] Input speed (motor speed)
fB Service factor n2 [min-1] Output speed (gear unit)
FI Inertial factor nx [min-1] Speed of calculated components
g [m/s²] Acceleration due to gravity PA [kW] Power of gear unit at start
i Gear ratio PB [kW] Power of gear unit at stop

All external mass moments of inertia Pstat [kW] Static power

Jex.red. [kgm²]
corrected to motor input Pdyn,A [kW] Dynamic acceleration power
Jex [kgm²] All extern mass moments of inertia Pdyn,B [kW] Dynamic deceleration power
Jmot [kgm²] Mass moment of inertia of the motor r [m] Sprocket / roller radius
ΣJred. [kgm²] Sum of all Jred values t Amin [s] Minimum starting time with risk of slip
l [m] Length tA [s] Starting time
m [kg] Mass tB [s] Braking time
M2,A [Nm] Output torque of gear unit for starting v [m/s] Linear velocity
M2,B [Nm] Output torque of gear unit for braking α [°] Angle of inclination
M2Nenn [Nm] Permissible output torque η Efficiency of the gear unit, system
M2stat [Nm] Static output torque µ Coefficient of friction

Starting torque of the motor (see motor electric µ0 Coefficient of static friction
MA [Nm]
data sheets from page 577) µr Coefficient of rolling friction
MB [Nm] Brake torque ρ [kg/dm³] Density (steel=7.85 kg/dm³)

www.weg.net WG20 Gear Units and Geared Motors 9

 2. Load types

Load type A Load type B Load type C

i Uniform load, Non-uniform load, Extremely rough conditions,

small masses to be accelerated, medium masses to be accelerated, high masses to be accelerated,
no shocks medium shocks heavy shocks and alternating load

Examples:
Examples: Examples:
Bucket conveyors, rotary furnaces, printing and dyeing
Continuous conveyor for bulk goods, light conveyors, Ramming machines, calenders, duty rolling mills,
machines, conveyor drums, centrifugal pumps and semi-
blowers, centrifugal pumps, light elevators, presses, heavy mixer, stone crushers, shredders,
fluid good agitators, wood working machines, elevators,
screw conveyors, fluid agitators heavy winches and lifts
screw conveyors, concrete mixers

3. Service factor
The gear unit required can be selected from the following tables showing the power, torque and output speed options. All our
gear units are adequately dimensioned for long-life industrial applications and are designed for continuous loading
under uniform operating conditions with small masses to be accelerated. Operating times of 8-10 hours a day are considered
standard. No drive can be built to withstand all possible conditions, therefore the load conditions at the site have to be deter-
mined accurately and the proper load type identified. After determining the daily operating hours, selecting the type and
establishing the number of starts (c/h), see the following diagram to find out the necessary service factor fB. The inertial factor
FI assists in evaluating and attributing the masses to be accelerated. The service factor given in the tables indicates the reserve
load in the rated torque for the specific gear unit.

In the tables you can usually choose between two types of gear units with the same or similar speeds, but different service
factors. When you select the correct gear unit, the fB from the diagram below should always be less than or equal to the avail-
able fB (from the selection tables) for the chosen type. For short time operation, you can sometimes select a maller gear unit,
while for peak operation, a large number of starts or 24-hour continuous operation, a larger type is necessary. The output speed
figures shown in the selection tables have been rounded up or rounded off. They may however vary due to the motor size and
are valid for nominal load. Deviations of +/- 3 % are permissible.

24 16 8 Operating hours per day

1.8 1.7 1.6 C

1.6 1.5
1.7
B
1.4
Minimum service factor fB

1.5
1.6
1.3
1.4
1.5 1.2
1.3
1.1 A
1.4
1.2
1.0
1.3
1.1 0.9

1.2 1.0 0.8

1 10 100 1000

Number of starts per hour

Formula Unit

Service factor fB = MM 2Nenn

2stat

∑Jex.red + Jmot
Inertial factor FI = Jmot
[min-1]

Modes of operation DIN EN 60034-1 see page 571. Legend see page 9.

10 WG20 Gear Units and Geared Motors www.weg.net

Thermal power limit
The thermal power limit Pt must always be taken into account when designing a drive. It represents the maximum input power
which can be transmitted by the gear unit at the given ambient temperature in a continuous operation mode (S1).

The technical data of the geared motors shown in the selection tables apply to an ambient temperature of +20 °C. Thermal
i
power limits for other temperatures can be seen in the table below.

Parameters to be considered:

▪ Higher / lower temperatures

▪ Vertical mounting positions (M2 or M4)
▪ Higher speed (> 1800 min-1) due to e.g. use of frequency inverter
▪ Small ratios
▪ Little mounting space

For such conditions we recommend consulting WEG. The geared motors can be adapted according to customer requirements
by using e.g. lubricant expansion, optimised oil quantities, synthetic oils or Viton seal rings.

Ambient temperature
Gear unit size
-20 °C -10 °C 0 °C +10 °C +20 °C +30 °C +40 °C +50 °C +60 °C
C002 2.5 2.1 1.8 1.5 1.2 1.0 0.7 0.5 0.3
C012 5.0 4.3 3.6 3.0 2.5 2.0 1.5 1.1 0.7
C032 10 8.7 7.4 6.2 5.0 4.0 3.0 2.1 1.3
C033 6.1 5.2 4.5 3.7 3.0 2.4 1.8 1.3 0.8
C052 19 16 14 12 9.5 7.5 5.7 4.0 2.5
C053 11 9.8 8.4 7.0 5.7 4.5 3.4 2.4 1.5
C062 26 22 19 16 13 10 7.8 5.5 3.5
C063 16 14 11 9.6 7.8 6.2 4.7 3.3 2.1
C072 34 29 25 21 17 13 10 7.2 4.5
C073 20 17 15 12 10 8.1 6.1 4.3 2.7
C082 58 50 42 35 29 23 17 12 7.7
C083 35 30 26 21 17 14 11 7.4 4.7
C092 82 71 60 50 41 32 25 17 11
C093 49 43 36 30 25 20 15 11 6.6
C094 34 29 25 21 17 13 10 7.2 4.5
C102 103 89 75 63 51 41 31 22 14
C103 62 54 46 38 31 25 19 13 8.3
C104 42 36 31 26 21 17 13 9 5.6
C132 142 123 105 87 71 57 43 30 19
C133 86 74 63 53 43 34 26 18 12
C134 58 50 43 36 29 23 18 12 7.8
C142 191 165 140 117 96 76 57 41 26
C143 115 99 85 71 58 46 35 25 15
C144 78 68 57 48 39 31 24 17 11
C162 271 234 199 167 136 108 82 58 36
C163 164 141 120 101 82 65 49 35 22
C164 111 96 82 68 56 44 34 24 15
C165 81 70 59 50 41 32 24 17 11

F022 8.4 7.2 6.1 5.1 4.2 3.3 2.5 1.8 1.1
F032 11 9.7 8.3 6.9 5.7 4.5 3.4 2.4 1.5
F042 18 15 13 11 8.9 7.1 5.4 3.8 2.4
F043 11 9.3 7.9 6.6 5.4 4.3 3.2 2.3 1.4
F052 24 21 18 15 12 9.7 7.3 5.2 3.3
F053 15 13 11 9.0 7.4 5.8 4.4 3.1 2.0
F062 31 27 23 19 15 12 9.3 6.6 4.1
F063 19 16 14 11 9.3 7.4 5.6 4.0 2.5
F072 51 44 37 31 25 20 15 11 6.8
F073 31 26 23 19 15 12 9.2 6.6 4.1
F082 73 63 54 45 37 29 22 16 9.8
F083 44 38 32 27 22 18 13 9.4 5.9
F084 30 26 22 18 15 12 9 6.4 4.0
F092 107 92 78 65 53 42 32 23 14

www.weg.net WG20 Gear Units and Geared Motors 11

 Ambient temperature
Gear unit size
-20 °C -10 °C 0 °C +10 °C +20 °C +30 °C +40 °C +50 °C +60 °C
F093 64 56 47 40 32 26 19 14 8.6
F094 44 38 32 27 22 17 13 9 5.9

i F102
F103
157
95
136
82
115
70
96
58
79
48
62
38
47
29
34
20
21
13
F104 64 56 47 40 32 26 19 14 9
F122 220 190 162 135 110 87 66 47 30
F123 133 115 98 82 67 53 40 28 18
F124 90 78 66 55 45 36 27 19 12
F152 337 291 247 207 169 134 101 72 45
F153 203 176 149 125 102 81 61 43 27
F154 138 119 101 85 69 55 42 30 19
F155 100 87 74 62 50 40 30 21 13

K022 10 8.8 7.4 6.2 5.1 4.0 3.1 2.2 1.4

K033 10 8.6 7.3 6.1 5.0 4.0 3.0 2.1 1.3
K043 16 14 12 9.8 8.0 6.3 4.8 3.4 2.1
K053 21 18 15 13 10 8.3 6.3 4.5 2.8
K063 23 20 17 14 12 9.3 7.0 5.0 3.1
K073 37 32 27 23 19 15 11 8.0 5.0
K083 44 38 32 27 22 17 13 9.4 5.9
K084 30 26 22 18 15 12 9.0 6.4 4.0
K093 62 54 46 38 31 25 19 13 8.3
K094 42 36 31 26 21 17 13 9.0 5.7
K103 95 82 69 58 47 38 29 20 13
K104 64 55 47 39 32 26 19 14 8.6
K123 131 113 96 80 66 52 39 28 18
K124 89 77 65 55 45 35 27 19 12
K153 185 160 136 114 93 74 56 40 25
K154 126 109 92 77 63 50 38 27 17
K155 91 79 67 56 46 36 28 20 12

Thermal power limit Pt [kW]

Thermal power limit for helical worm gear units

The thermal power limit is calculated from the permissible thermal power loss using the following formula:

Designation Unit Description

Pv
Pt = η
1- 100 Pv
Pt [kW]
[kW]
Thermal power limit
Permissible thermal power loss (see table)
h [%] Efficiency of the gear unit (see from page 531)

Ambient temperature
Gear unit size
-20 °C -10 °C 0 °C +10 °C +20 °C +30 °C +40 °C +50 °C +60 °C
S03 0.22 0.20 0.17 0.15 0.13 0.11 0.09 0.07 0.04
S04 0.32 0.29 0.25 0.22 0.19 0.16 0.13 0.10 0.06
S05 0.48 0.44 0.39 0.34 0.29 0.24 0.19 0.15 0.10
S06 0.75 0.68 0.60 0.53 0.45 0.38 0.30 0.23 0.15
S07 0.95 0.86 0.76 0.67 0.57 0.48 0.38 0.29 0.19

Permissible thermal power loss Pv

12 WG20 Gear Units and Geared Motors www.weg.net

Input types
1. IEC Adapter I

Standard motors complying with DIN EN 50347 IM B5 can be moun-

ted on WG20 gear units with IEC adapters. The adapters are oil-tight.
i
The motors are attached using different couplings, depending on the
adapter size: Plug-in adapter Adapter with coupling

▪ I63 to I100: Plug-in adapter

The connecting coupling is one part; the motor shaft is inserted directly into the coupling shaft. Before mounting, the
motor shaft is to be cleaned and coated with lubricating paste (e.g. Klüberpaste 46 MR 401).
This makes it easier to disassemble the shaft when servicing is required and protects the connection against frictional
corrosion.

▪ I112 to I132: Curved teeth coupling

The connecting coupling comprises two parts; a coupling hub is mounted on the motor shaft and fixed using a threaded
pin. Power is transmitted by means of the internally toothed coupling sleeve.

▪ I160 to I280: Claw coupling

The connecting coupling comprises two parts; a coupling hub is mounted on the motor shaft and fixed using a threaded
pin. Power is transmitted by means of a flexible coupling star.

Complete drive systems with WEG IEC motors:

By mounting, for example, WEG W22 IEC motors or WEG roller table motors, complete packages can be supplied for a
wide range of applications.

2. NEMA Adapter N

Standard motors complying with NEMA C-face standard can be

mounted on WG20 gear units with NEMA adapters. The adapters are
oil-tight. The motors are attached using different couplings, depending
on the adapter size:

▪ N56 to N182: Plug-in adapter

The connecting coupling is one part; the motor shaft is inserted Plug-in adapter Adapter with coupling
directly into the coupling shaft. Before mounting, the motor shaft is
to be cleaned and coated with lubricating paste (e.g. Klüberpaste 46 MR 401). This makes it easier to disassemble the
shaft when servicing is required and protects the connection against frictional corrosion.

▪ N184 to N215: Curved teeth coupling

The connecting coupling comprises two parts; a coupling hub is mounted on the motor shaft and fixed using a threaded
pin. Power is transmitted by means of the internally toothed coupling sleeve.

▪ N254 to N364: Claw coupling

The connecting coupling comprises two parts; a coupling hub is mounted on the motor shaft and fixed using a threaded
pin. Power is transmitted by means of a flexible coupling star.

Complete drive systems with WEG NEMA motors:

By mounting, for example, WEG W22 NEMA motors, complete packages can be supplied for a wide range of applica-
tions.

It is recommended that the motors are sealed with a sealant (e.g. Loctite 510) when IEC and NEMA adapters are
mounted to the flange to prevent water or dust ingress. Use screws of strength class 8.8 (or higher) to fasten the mo-
tors to the flanges. Observe the corresponding tightening torques according to the mounting Instruction.

www.weg.net WG20 Gear Units and Geared Motors 13

 3. SERVO Adapter S

WG20 gear units with SERVO adapters can be fitted with servomotors from different
manufacturers. The adapters are oil-tight, and the motors are mounted using flexible servo
couplings. The backlash-free connection between the motor shaft and the adapter shaft is
i made by means of a clamp connection.
Both servo motors with smooth shaft and servo motors with feather key can be mounted.
The mounting clearance between the motor shaft and coupling is reduced to 0 by means of a
clamp ring. Servo coupling

▪ S92 to S190: Servo coupling

4. Input Unit U

Gear unit versions with input unit enable the WG20 gear units to be
operated by attaching drive elements such as couplings or belt drives.
Permissible shear forces or thermal power limits must be checked
accordingly.

▪ Input unit sizes: U2, U3, U5, U6, U7

Input unit U2 and U3 Input unit U5 to U7

Size U2 U3 U5 U6 U7

Input shaft [mm] 19x40 24x50 28x60 38x80 42x110 48x110 55x110

The shear forces given in the following table (Permissible shear l

forces - Input unit on page 14) apply to input units with force x
applied to the shaft centre x = l/2. When determining the per-
missible shear forces, the unfavourable rotating direction and the Fr,zul
most unfavourable force direction is assumed, as well as an input
speed n1 = 1400 min-1 at a given rated power PN. The calculation
was made with a standard shaft and standard bearing. For exact

Ød
determination of the permissible shear force Fr,zul, the direction of
force and the rotating direction must be specified.

Mmax Nominal power PN [kW]

Input shaft unit [mm]
[Nm] 0.12 0.18 0.25 0.37 0.55 0.75 1.1 1.5 2.2 3 4 5.5
Ød l at Fr = 0 Permissible shear force Fr,zul [N]
U2 19 40 18 2600 2500 2400 2300 2000 1800 1600 1300 700 - - -
U3 24 50 100 5000 5000 5000 5000 5000 5000 4600 4200 3400 2500 2200 1700
28 60 100 6500 6500 6500 6500 6500 6500 6500 6400 6400 6400 6300 6300
U5 38 80 170 11000 11000 11000 11000 11000 11000 11000 11000 10500 10500 10000 9500
42 110 240 11000 11000 11000 11000 11000 11000 11000 11000 10500 10500 10000 9500
U6 48 110 490 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 14500 14500
U7 55 110 970 25000 25000 25000 25000 25000 25000 25000 25000 25000 25000 25000 25000

Mmax Nominal power PN [kW]

Input shaft unit [mm]
[Nm] 7.5 9.2 11 15 18.5 22 30 37 45 55 75
Ød l at Fr = 0 Permissible shear force Fr,zul [N]
U2 19 40 18 - - - - - - - - - - -
U3 24 50 100 1000 500 - - - - - - - - -
28 60 100 6200 6100 6000 - - - - - - - -
U5 38 80 170 9000 8000 7500 6000 4500 - - - - - -
42 110 240 9000 8000 7500 6000 4500 3000 - - - - -
U6 48 110 490 14000 13500 13000 11500 10500 9500 7500 5500 3000 - -
U7 55 110 970 25000 25000 25000 25000 25000 25000 25000 25000 24000 23000 21000

Permissible shear force - Input unit Fr,zul at x = l/2

14 WG20 Gear Units and Geared Motors www.weg.net

Explosion-proof gear units and geared motors
WG20 type series gear units meet the requirements of Directive 2014/34/EU on equipment for use in potentially hazardous
areas. Both gear units and geared motors can be used.
i

WG20 geared motor for WG20 geared motor for

application in zones 2 + 22 application in zones 1 + 21

General information
The operation of systems requires special measures in areas with explosive air/gas mixtures or air/dust mixtures. The Directive
governs the possible uses of equipment within the existing danger zones, whereby both electrical and mechanical equipment,
such as gear units, must meet the minimum requirements specified in the standard.

Zoning
Zoning takes into account whether the Ex atmosphere is a mixture of air with gas or with dust.

Relevant areas

▪ Category 2G/2D and EPL Gb/Db units

are intended for use in areas in which there is occasionally an explosive atmosphere. They are permitted for use in zone
1 (category 2G) and zone 21 (category 2D), and zone 2 (3G) and 22 (3D).

▪ Category 3G/3D and EPL Gc/Dc units

are intended for use in areas in which an explosive atmosphere caused by gases, vapours, mists or suspended dust
is unlikely to occur. However, if this does occur, it will occur only rarely or for a short period of time. These units are
permitted for use in zone 2 (category 3G) or zone 22 (category 3D).

Marking according to standards

Equipment group I Equipment group II

Mines Other areas with dust or gas explosive atmosphere
Category M1 M2 1 2 3
Presence of continuous, frequent or not likely in normal operation,
likely in normal operation
explosive atmospheres for long periods only for short period of time
Surrounding atmosphere G D G D G D
Zone 0 20 1 21 2 22
Equipment Protection Level Ma Mb Ga Da Gb Db Gc Dc
Type of protection
h (c, k) h (c, k) h (c, k) h (c, k)
(not electric)
Type of protection (electric) d, eb tb ec tc
Ex-marking gear unit II 2G Ex h IIC T4 Gb II 2D Ex h IIIC T125°C Db II 3G Ex h IIC T4 Gc II 3D Ex h IIIC T125°C Dc
Ex-marking motor II 2G Ex d IIC T4 Gb II 2D Ex tb IIIC T125 °C Db II 3G Ex ec IIC T3 Gc II 3D Ex tc IIIC T125°C Dc
Possible range of application for WG20 products

Types of ingnition protection used

The ignition of an explosive mixture in the classified zones is to be prevented by the various types of ignition protection used for
the equipment.

▪ Types of ignition protection for non-electrical equipment: according to EN ISO 80079-36 and -37
„c“: Protection by means of structural safety
„k“: Protection by means of fluid coupling

▪ Types of ignition protection for electrical equipment: according to EN ISO 60079-07 and -31
„ec“ and „eb“: Protection by means of increased safety
„tc“ and „tb“: Protection by means of housing
„d“: flameproof enclosure

www.weg.net WG20 Gear Units and Geared Motors 15

 Applicable explosive atmospheres
For the types of ignition protection used, parts which can be exposed to an explosive atmosphere without restriction must not
reach excessively high temperatures.

▪ Temperature classes for gas explosion protection (G)

i Flammable gases and vapours are divided into temperature classes according to their flammability. The influence of
ambient temperature and self-heating of the equipment must also be taken into account.

The maximum surface temperature of the equipment may only assume values that correspond to the temperature class
for gases. In fact, the ignition temperature represents the lowest temperature value at which a hot surface can ignite the
corresponding explosive atmosphere.
In addition, gases and vapours are classified in explosion groups IIA, IIB and IIC. The hazardousness of gases increases
from explosion group IIA to IIC.

WG20 geared motors can be used in temperature class T3 (max. surface temperature 200 °C).
WG20 gear units with input types can be used in temperature class T4 (max. surface temperature 135 °C).

Temperature class T1 T2 T3 T4 T5 T6
Max. permissible surface temperature 450 °C 300 °C 200 °C 135 °C 100 °C 85 °C
Possible range of application for WG20 products

▪ Surface temperature for dust explosion protection (D)

Dusts are not divided into temperature classes, but the value of the minimum ignition temperature is specified.

WG20 gear units and geared motors are classified with a max. surface temperature of 125 °C.

Degree of protection
Dust group Description
tb tc
IIIA Combustible flyings IP5X IP5X
IIIB Non-conductive dust IP6X IP5X
IIIC Conductive dust IP6X IP6X
Necessary degree of protection for dust explosive atmospheres

Table of lubricants
Recommended
-10 °C ... +60 °C -20 °C ... +80 °C -25 °C ... +60 °C -40 °C ... +80 °C -20 °C ... +40 °C
ambient temperatures

DIN (ISO) CLP (mineral oil) 1) CLP PG (polyglycol oil) 2) CLP PG (polyglycol oil) CLP-HC (polyalphaolefin oil) 3) food grade

ISO VG 220 460 220 220 220

ARAL
Degol BG 220 Degol GS 460 Degol GS 220 Degol PAS 220 -

BP
Energol GR-XP 220 Enersyn SG-XP 460 Enersyn SG-XP 220 Enersyn HTX 220 -

Castrol
Alpha SP 220 Alphasyn PG 460 Alphasyn PG 220 Alphasyn HTX 220 Optileb GT 220

Klüber
Klüberoil GEM 1-220 N Klübersynth GH 6-460 Klübersynth GH 6-220 Klübersynth GEM 4-220 N Klüberoil 4UH1 220 N

Mobil
Mobilgear 600 XP 220 Glygoyle 460 Glygoyle 220 SHC 630 SHC Cibus 220

Shell
Omala S2 G 220 Omala S4 WE 460 Omala S4 WE 220 Omala S4 GX 220 -

Addinol
Gear Oil 220 F Poly Gear PG 460 Poly Gear PG 220 Eco Gear 220 S Ecoleb 220 FG

1) standard lubricant acc. to DIN 51517 part 3 - CLP ISO VG 220 for helical, parallel and helical bevel gear units
2) standard lubricant acc. to DIN 51517 part 3 - CLP PG ISO VG 460 for helical worm gear units
3) note critical starting behaviour at low temperatures

16 WG20 Gear Units and Geared Motors www.weg.net

Lubricant expansion unit
For gear units and geared motors in M4 design, high oil levels are required for lubrication of the first gear stage.
To prevent oil leaking from the gear unit during operation, expansion units are to be used at reductions i < 20 or at higher motor
speeds (e.g. frequency drives operation > 2000 min-1).
i
The use of lubricant expansion units is recommended for gear unit sizes from C07 (helical gear unit), F06 (parallel shaft gear
unit), K06 (helical bevel gear unit), S06 (helical worm gear unit) and for the conditions described above.

Example: CF082-11P-132S-04E-TH-TF

Painting
Standard colour geared motors: RAL 7011 (RAL 5009, RAL 9005 without additional costs)
In addition to the standard high-grade polyurethane-based surface finish other special finishes for applications that are subject
to specific environmental conditions are offered. Paintwork is basically categorised according to the composition of the applied
surface finish. The standard program contains 6 painting systems categorised from LA0 to LC5. Special colours are possible.

NDFT Corrosion category

Painting system Application Layering Nominal dry film Temperature range
thickness DIN EN ISO 12944-5

not painted
Dip primer
LA0 Primer -40 °C - +120 °C
Base coat (2 pack PUR)
Indoor installation, Dip primer
LC1 (Standard) 40 µm -40 °C - +120 °C C1
neutral atmosphere Varnish (1K-AY-PUR*) or (2 pack PUR**)
Protected outdoor installation, Dip primer
LC2 140 µm -40 °C - +120 °C C2
neutral atmosphere 2x Varnish (2 pack PUR)
Dip primer
Outdoor installation,
LC3 Base coat (2 pack PUR) 160 µm -40 °C - +120 °C C3
industrial atmosphere
Varnish (2 pack PUR)
Dip primer
Outdoor installation, Base coat (2 pack EP)
LC4 240 µm -40 °C - +120 °C C4
aggressive atmosphere Intermediate base coat (2 pack PUR)
Varnish (2 pack PUR)
Dip primer
Coast or offshore,
Base coat (2 pack EP)
LC5 very aggressive atmosphere, 320 µm -40 °C - +120 °C C5
Intermediate base coat (2 pack PUR)
under water
2x Varnish (2 pack PUR)
*) Colours RAL 7011, RAL 5009, RAL 9005
**) All other colours

www.weg.net WG20 Gear Units and Geared Motors 17

 Degrees of protection
Degree of protection according to DIN EN 60034-5.
The designation to indicate the degrees of protection consists of the characteristic letters IP followed by two numerals.
Code figure 1: degree of protection against contact with live or moving parts and against ingress of solid foreign objects
i Code figure 2: degree of protection against harm for ingress of water

Code figure 1 Code figure 2

Description Description

0 No protection 0 No protection

Protected against solid foreign objects of 50 mm diameter and larger: Protected against dripping water: vertically falling drops may not have any
1 1
the probe (50 mm ball) may not fully penetrate. harmful effects.

Protected against solid foreign objects of 12.5 mm diameter and larger: Protected against dripping water when the housing is inclined up to 15 °:
2
the probe (ball 12.5 mm) shall not fully penetrate. 2 vertically falling drops may not have any harmful effects when the housing
is inclined up to 15 ° from the vertical.
Protected against solid foreign objects of 2.5 mm diameter:
3
the probe (ball 2.5 mm) must not penetrate at all. Protected against water spray: water sprayed at an angle up to 60 ° on both
3
sides of the vertical may not have any harmful effects.
Protected against solid foreign objects of 1 mm and larger:
4
the probe (1 mm ball) must not penetrate at all. Protected against splash water: water splashed against the housing from
4
any direction may not have any harmful effects.
Dust protected: ingress of dust is not totally prevented, but dust shall not
5 penetrate in a quantity that the operation of the device is affected Protected against water jets: water that is from any direction in jets against
5
or to impair safety. the housing may not have any harmful effects.

6 Dustproof: no ingress of dust at underpressure of 20 mbar in the housing Protected against strong water jets: water that is from any direction in
6
powerful jets against the housing may not have any harmful effects.

Protected against the effects of temporary (1m for 30 min) immersion in

Degree of protection: water: water must not enter in quantities causing harmful effects, if the
7
Modular system motor: IP55 (standard) to IP67 housing is under standardised conditions of pressure and time temporarily
submerged in water.
Brake: IP55 (standard) to IP66
Gear unit: IP65 (standard) to IP68 Protected against the effects of continuous immersion in water:
water must not enter in quantities causing harmful effects when the
8 enclosure is permanently submerged in water under conditions to be
agreed between manufacturer and user. The conditions must be more
stringent than for index 7.

18 WG20 Gear Units and Geared Motors www.weg.net

Helical gear units and
Helical geared motors C

C
 Technical Data
Size C00 C01 C03 C05 C06 C07 C08 C09 C10 C13 C14 C16
Power [kW] 0.12 - 0.75 0.12 - 1.5 0.12 - 3.0 0.12 - 7.5 0.12 - 9.2 0.12 - 15 0.12 - 22 0.12 - 30 0.12 - 37 0.12 - 75 0.12 - 90 0.12 - 110
Torque [Nm] 50 85 200 400 600 820 1550 3000 4500 8000 13000 18000
2.44 3.09 2.91 2.52 2.80 2.59 2.69 2.99 3.11 4.00 5.17 5.96
Ratio - - - - - - - - - - - -
47.44 66.50 286.32 328.43 375.71 351.33 368.94 3282.02 2636.78 1891.77 2162.84 22405.25
Number of stages 2 2 2/3 2/3 2/3 2/3 2/3 2/3/4 2/3/4 2/3/4 2/3/4 2/3/4/5
Housing material aluminium cast iron
Type with key acc. to DIN 6885.1 and threaded bore acc. to DIN 332 sheet 2
Solid
C
Tolerance < Ø 55: k6 / ≥ Ø 55: m6
shaft
Material standard: C45E (1.1191) / stainless steel on request
Tolerance centring ≤ 250: j6 / > 250: h6 acc. to DIN EN 50347
Flanges
Material cast iron
Gear Type honed - designed and produced according to DIN 3990/3991 - Q7
wheels Material 16MnCr5 (1.7131) case hardened - minimum 58HRC
Shaft Type type AS acc. to DIN 3760
seals Material standard NBR / special FKM
Bearing standard / reinforced
Type standard CLP ISO VG 220 / special CLP HC ISO VG 220
Lubricants
Quantity depending on mounting position
acc. to DIN 747: ≤ 50: -0.4; > 50 to ≤ 250: -0.5; > 250: -1
Axle height
for foot-mounted geard motors, the motor may extend below the mounting surface

General information
1. Nameplate

h
WG20 WEG Gear Systems GmbH MADE IN i
2753 Markt Piesting, Austria AUSTRIA
www.weg-gears.net 08FEB24 j
a CG032-11P-80-04F-TH-TF-BR10 SN: 24B02931 k
Mat.: l
b P1 0.75 kW rpm 56 @ 50 Hz m
c M2 127 Nm i 25.17 n
d fB 1.6 M1 o
e Oil 0.3l-ISO VG 220 CLP p
f 17.6 kg q

a Type code j Production date

b Motor power k Serial number

c Output torque l Material number

d Service factor m Output speed and Frequency

e Type and quantity of lubricant n Total gear ratio

f Weight o Mounting position

g Space for ATEX code (if applicable) p QR-Code linked online to additional information

h Manufacturer address q Space for additional information

i Country of origin

20 WG20 Gear Units and Geared Motors www.weg.net

2. Type code

CG083-EX-11P-90S/L-04F ...
1 2 3 4 5 6 7 8 9 10

CG083-EX-I112-HT
1 2 3 4 5 11 12
C
1 Type: C = Helical gear unit

2 Design: A = Foot mounted and B5 flange execution with output shaft

C = B14 flange execution with output shaft
F = Flange execution with output shaft
G = Foot mounted with output shaft
W = Foot mounted and B14 flange execution with output shaft

3 Size: 00 01 03 05 06 07 08 09 10 13 14 16

4 Number of stages: 2 = 2 gear stages 3 = 3 gear stages
4 = 4 gear stages 5 = 5 gear stages

5 ATEX execution: when operated in explosive atmospheres, see page 15

6 Motor type: 14P = Integral motor aluminium IE3

11P = Integral motor aluminium IE3
11S = Integral motor aluminium IE4
22P = Integral motor cast iron IE3
22S = Integral motor cast iron IE4

7 Motor frame size: 63 71 80 L80 90S/L 100L L100L 112M 132S

132M L132M 160M 160L 180M 180L 200L 225S/M 280S/M

8 Number of poles: 04 = 4 poles 06 = 6 poles

9 Power indicator: D E F G

10 Motor modules: see from page 595

11 Adapters, Input unit: IEC adapter I63 I71 I80 I90 I100 I112 I132
I160 I180 I200 I225 I250 I280

NEMA adapter N56 N143 N182 N184 N213

N254 N284 N324 N364

SERVO adapter S92 S105 S114 S115 S130

S141 S142 S180 S189 S190

Input unit U2 U3 U5 U6 U7

Direct mounting (IEC):

IEC63 IEC71 IEC80 IEC90 IEC100 IEC112
IEC132 IEC160 IEC180 IEC200 IEC225 IEC250 IEC280

12 High/Low temperature execution: HT LT

Type code Motor see page 565

www.weg.net WG20 Gear Units and Geared Motors 21

 3. Range

Size C00 C01 C03 C05 C06 C07 C08 C09 C10 C13 C14 C16

Housing material Aluminium Cast iron

4. Design

A C F G

A Foot mounted and B5 flange execution with output shaft

C B14 flange execution with output shaft

F Flange execution with output shaft

G Foot mounted with output shaft

W W Foot mounted and B14 flange execution with output shaft

5. Venting the gear unit

The helical gear unit sizes C00 to C06 are neither equipped with a venting nor an oil drain screw.
They are supplied with lifetime-lubrication. a
By default, the helical gear units from C07 are equipped with venting screws with a safety strap
for transportation (see illustration). The rubber strap (a) of the venting screw must be removed entirely
before the initial startup. The venting screw is placed accordingly to the mounting position
(see chapter Mounting positions, page 26).

6. Overhung and axial loads

The overhung loads (FrN) indicated in the respective selection tables apply to gear units with the force acting on the
shaft center (x=l/2). The permissible overhung loads listed are based on the least favourable loading direction
and calculated for standard shafts and standard bearings. Other load directions and action can be calculated with
equations Q1 to Q3. If transmission elements are placed on the output shaft, an appropriate factor (fz) has to
be taken into consideration when determining the overhung load.

Gear wheels Sprockets V-belts Flat belts

fz=1.1 fz=1.2 fz=1.1

fz=1.8 fz=2.5
(z≤17) (z≤13) (z>13)

Use the following equations Q1 and Q2 to calculate the permissible radial loads on the output shaft. Q3 is to calculate
the real existing shaft loads for your application. The results are to be compared by using the equation Q4.

22 WG20 Gear Units and Geared Motors www.weg.net

 Variable Unit Description
Q1 FzL = FrN · a1 a1 Load action factor - output shaft bearing from Table 1
a2 Load action factor - output shaft from Table 1
d0 [m] Effective diameter of the transmission element
Q2 FzW = FW · a2 Geared motor output torque (from selection tables)
M2 [Nm]
or required calculated output torque

FzL [N] Permissible overhung load for output shaft bearings

2 · M2
Q3 FQvorh = d0
· fz FzW [N] Permissible overhung load for output shaft
FrN [N] Permissible overhung load from selection tables

Permissible overhung load -

C
FW [N]
FQvorh ≤ FzL Output shaft x=l/2 from Table 2

FQvorh [N] Existing overhung load at gear shaft

Q4 fz Factor for transmission element

FQvorh ≤ FzW Mmax [Nm]

Highest possible output torque
for coupling operation (Table 2)

Always use both equations Q1 and Q2 for your calculations.

l
x/l
x
0 0.25 0.5 0.75 1 1.5 2

Ød
a1 → Equation Q1 Fr
1.39 1.18 1.00 0.85 0.73 0.52 0.38

a 2 → Equation Q2

2.00 2.00 1.00 0.55 0.38 0.23 0.17

Table 1: Load action factors a1, a2

Intermediate values can be interpolated linearly. Combined load (Fr ≠ 0; Fa = 0) on request.

Output shaft Output torque M2 [Nm]

[mm] Mmax
50 85 200 400 600 820 1550 3000 4500 8000 13000 18000
at Fr = 0
Ød l F w [kN] at x/l = 0.5 → Equation Q2

20 40 160 3.4 3.1

25 50 300 5.9 5.7 4.8

30 60 500 7.6 7.1 5.0

35 70 800 11.0 10.0 8.3

40 80 1170 13.0 12.0 10.7

50 100 2250 24.0 24.0 23.0 20.0

60 120 3740 31.0 30.0 23.0

70 140 5850 44.0 41.0 36.0

90 170 11700 72.0 70.0 61.0

110 210 20800 106.0 103.0 93.0

120 210 26700 129.0 121.0 109.0

Table 2: Permissible overhung load - output shaft x = l/2

The axial loads (FaN) for execution with output shaft, given in the following selection tables, are valid at radial force
FrN = 0. If there are axial loads or radial and axial components acting on the drive which are extraordinarily high, we
recommend to contact the manufacturer.

www.weg.net WG20 Gear Units and Geared Motors 23

 7. Mounting positions, Position of the terminal box and Cable entry

Mounting positions foot type - Sizes C00 to C06

Gear units C00 to C06 are not ventilated and supplied with lifetime lubrication

Reference area

M1

M6 M2

M4 M5

M3

Position of the terminal box Cable entry

Standard: Position 1 Standard: Position I
2
I III
I
III
III

1 3 II IV

III
I
I
III I
4

24 WG20 Gear Units and Geared Motors www.weg.net

 Mounting positions flange type - Sizes C00 to C06
Gear units C00 to C06 are not ventilated and supplied with lifetime lubrication.

Reference area

M1

M6 M2

M4 M5

M3

Position of the terminal box Cable entry

Standard: Position 1 Standard: Position I
2
I III
I
III
III

1 3 II IV

III
I
I
III I
4

www.weg.net WG20 Gear Units and Geared Motors 25

 Mounting positions foot type - Sizes C07 to C16

Venting screw Position visible on this side

Oil drain screw Position covered or on the far side of the gear unit

Oil level plug

Reference area

C
C09-C16

C07 C07-C08

M1
C08

C10-C16 M6 M2
C09 not possible

C08

M4 M5 C10-C16
C09 not possible

M3
C07
C07-C08

C09-C16

Position of the terminal box Cable entry

Standard: Position 1 Standard: Position I

2
I III
I III
III

1 3 II IV
III
I
I
III I
4

26 WG20 Gear Units and Geared Motors www.weg.net

 Mounting positions flange type - Sizes C07 to C16

Venting screw Position visible on this side

Oil drain screw Position covered or on the far side of the gear unit

Oil level plug

Reference area

C
C09-C16

C07 C07-C08
C08
C07
C07/C08 C09-C16 M1
C09-C16
C08

C10-C16 M6 M2 C07-C16

C09 not possible

C08

C07/C08

C09-C16

C09-C16
C07/C08

C08 C08

M4 M5 C10-C16
C09 not possible

C09-C16 C07/C08
M3 C07

C08 C09-C16 C07

C07-C08

C09-C16

Position of the terminal box Cable entry

Standard: Position 1 Standard: Position I

2
I III
I III
III

1 3 II IV
III
I
I
III I
4

www.weg.net WG20 Gear Units and Geared Motors 27

C

28 WG20 Gear Units and Geared Motors www.weg.net

Selection tables - Geared motors
The technical data of the geared motors shown in the selection tables apply to an ambient temperature of +20 °C.

The selection tables are calculated with following motor data:

Power (IEC frame size) Motor series (IE class)

up to 0.55 kW (63 - 80) 14P (IE3) - aluminium

0.75 - 9.2 kW (80 - 132) 11P (IE3) - aluminium C

11 - 75 kW (160 - 250) 22P (IE3) - cast iron

75 - 110 kW (280) 22S (IE4) - cast iron

Structure of the selection tables

1 2

PN = 0.12 kW IE3
50 Hz 60 Hz at 50 Hz

0.12 kW 0.14 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg

3 4 5 6 7 8 9 10 11 12

1 Rated power of the motor

2 Given values are based on the respective efficiency class

3 Output speed at 50 Hz

4 Output speed at 60 Hz

5 Output torque

6 Service factor

7 Total ratio

8 Permissible radial load at midpoint of the output shaft extension (standard bearing) at axial load=0

9 Permissible axial load (standard bearing) at radial load=0

10 Geared motor type

11 Weight

12 Page refererence for dimension sheet

*) Increased rated power at 60 Hz can only be reached together with increased voltage within the wide range
(for details see page 574).
Increased rated power

1.2 x PN

www.weg.net WG20 Gear Units and Geared Motors 29

 PN = 0.12 kW IE3
50 Hz 60 Hz at 50 Hz

0.12 kW 0.14 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
0.05 0.06 20103 0.90 18322.05 106.8 22.2
0.06 0.07 16816 1.10 15484.09 116.5 25.2
0.07 0.09 13576 1.35 12662.22 123.8 28.2
0.08 0.10 11904 1.55 11217.58 126.8 29.7

C
CG165-14P-63-06F 695
0.09 0.11 10501 1.75 9998.22 129.0 31.0 194
CF165-14P-63-06F 718
0.10 0.12 9568 1.90 9181.16 130.3 31.8
0.12 0.15 7913 2.30 7752.38 132.3 33.3
0.13 0.16 7120 2.55 7067.08 133.1 34.0
0.15 0.18 6277 2.90 6345.03 133.8 34.8
0.06 0.08 15979 1.15 22405.25 118.6 26.0
0.08 0.09 12900 1.40 18322.05 125.1 28.8
0.09 0.11 10734 1.70 15484.09 128.7 30.7
CG165-14P-63-04E 695
0.10 0.12 9952 1.85 14467.28 129.8 31.5 194
CF165-14P-63-04E 718
0.11 0.14 8598 2.10 12662.22 131.5 32.7
0.13 0.15 7480 2.45 11217.58 132.7 33.7
0.14 0.17 6563 2.75 9998.22 133.6 34.5
0.35 0.43 2880 1.60 2636.78 41.7 23.5
0.41 0.51 2405 1.90 2229.16 42.9 24.1
CG104-14P-63-06F 170
0.43 0.53 2321 1.95 2156.24 43.1 24.2 180
CF104-14P-63-06F 174
0.51 0.63 1930 2.35 1822.91 43.9 24.7
0.54 0.67 1788 2.55 1702.59 44.1 24.9
0.53 0.65 1827 2.50 2636.78 44.0 24.9 CG104-14P-63-04E 170
180
0.63 0.77 1512 3.00 2229.16 44.5 25.3 CF104-14P-63-04E 174
0.28 0.35 3697 0.85 3282.02 16.4 24.5
0.34 0.42 3005 1.00 2683.89 22.9 25.6
0.36 0.44 2902 1.05 2597.68 23.6 25.7
0.41 0.50 2519 1.20 2268.18 25.9 26.3
0.44 0.54 2349 1.30 2124.27 26.7 26.5
0.50 0.61 2034 1.50 1854.82 28.1 27.0
0.55 0.68 1828 1.65 1677.34 28.9 27.3 CG094-14P-63-06F 128
176
0.56 0.69 1787 1.70 1643.20 29.0 27.4 CF094-14P-63-06F 126
0.63 0.78 1580 1.90 1464.58 29.6 27.7
0.69 0.85 1439 2.10 1344.90 30.0 27.9
0.71 0.88 1386 2.20 1300.57 30.2 28.0
0.81 1.0 1192 2.55 1135.60 30.6 28.2
0.87 1.1 1108 2.75 1064.47 30.8 28.4
0.89 1.1 1076 2.80 1035.22 30.9 28.4
0.43 0.52 2390 1.30 3282.02 26.5 26.5
0.52 0.64 1930 1.60 2683.89 28.5 27.1
0.54 0.66 1864 1.65 2597.68 28.7 27.2
0.62 0.76 1611 1.90 2268.18 29.6 27.6 CG094-14P-63-04E 127
176
0.66 0.81 1503 2.00 2124.27 29.9 27.8 CF094-14P-63-04E 125
0.76 0.93 1293 2.35 1854.82 30.4 28.1
0.84 1.0 1157 2.60 1677.34 30.7 28.3
0.86 1.0 1129 2.70 1643.20 30.8 28.3
2.6 3.2 435 1.90 351.33 13.2 14.2
2.9 3.6 396 2.10 319.60 13.3 14.2 CG073-14P-63-06F 38
170
3.3 4.1 345 2.40 278.44 13.5 14.4 CF073-14P-63-06F 42
3.7 4.5 314 2.65 253.30 13.6 14.4
4.0 4.9 287 2.90 351.33 13.7 14.6 CG073-14P-63-04E 38
170
CF073-14P-63-04E 42
2.5 3.0 465 1.30 375.71 9.6 6.8
2.7 3.3 427 1.45 344.51 9.9 6.8
3.0 3.7 381 1.60 307.24 10.2 7.0
3.3 4.0 349 1.75 281.73 10.3 7.1 CG063-14P-63-06F 22
168
3.8 4.7 301 2.00 242.60 10.6 7.2 CF063-14P-63-06F 27
4.2 5.1 276 2.20 222.46 10.7 7.3
4.9 6.1 233 2.60 188.11 10.9 7.4
5.4 6.6 214 2.85 172.49 10.9 7.5
3.7 4.6 306 2.00 375.71 10.6 7.2
4.1 5.0 281 2.15 344.51 10.7 7.3 CG063-14P-63-04E 21
168
4.6 5.6 251 2.40 307.24 10.8 7.4 CF063-14P-63-04E 26
5.0 6.1 230 2.65 281.73 10.9 7.4

30 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.12 kW IE3
50 Hz 60 Hz at 50 Hz

0.12 kW 0.14 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
2.8 3.5 407 1.00 328.43 4.8 6.3
3.1 3.8 370 1.10 298.57 5.4 6.4
3.5 4.3 332 1.25 267.93 6.0 6.6
3.8 4.7 302 1.35 243.57 6.3 6.7
4.3
4.8
5.3
5.9
265
241
1.55
1.70
213.71
194.29
6.7
6.8
6.9
7.0
CG053-14P-63-06F
CF053-14P-63-06F
17
22
166 C
5.6 6.9 205 2.00 165.45 7.1 7.2
6.1 7.6 186 2.15 150.41 7.2 7.2
7.0 8.6 165 2.45 132.97 7.3 7.4
7.7 9.4 150 2.70 120.88 7.4 7.4
4.3 5.2 268 1.50 328.43 6.6 6.9
4.7 5.8 244 1.65 298.57 6.8 7.0
5.2 6.4 219 1.85 267.93 7.0 7.1
CG053-14P-63-04E 17
5.8 7.1 199 2.05 243.57 7.1 7.2 166
CF053-14P-63-04E 22
6.6 8.0 174 2.30 213.71 7.3 7.3
7.2 8.9 158 2.55 194.29 7.4 7.4
8.5 10 135 3.00 165.45 7.5 7.5
4.6 5.6 251 0.80 202.55 3.9 3.0
5.1 6.3 224 0.90 180.83 4.4 3.2
5.6 6.9 203 1.00 164.23 4.7 3.3
6.5 8.0 177 1.15 142.47 5.0 3.5
7.1 8.8 160 1.25 129.39 5.2 3.6
CG033-14P-63-06F 13
8.4 10 136 1.50 109.79 5.4 3.8 164
CF033-14P-63-06F 15
9.3 11 124 1.65 99.71 5.5 3.8
11 13 106 1.90 85.78 5.6 3.9
12 15 97 2.10 77.90 5.7 4.0
14 18 79 2.55 64.05 5.8 4.1
16 20 72 2.80 58.17 5.8 4.1
4.9 6.0 234 0.90 286.32 4.2 3.1
5.4 6.6 212 0.95 260.03 4.6 3.3
6.3 7.7 182 1.10 223.03 5.0 3.5
6.9 8.5 165 1.25 202.55 5.2 3.6
7.8 9.5 147 1.40 180.83 5.3 3.7
CG033-14P-63-04E 12
8.6 10 134 1.50 164.23 5.4 3.8 164
CF033-14P-63-04E 14
9.9 12 116 1.75 142.47 5.6 3.9
11 13 106 1.90 129.39 5.6 3.9
13 16 90 2.25 109.79 5.7 4.0
14 17 81 2.50 99.71 5.7 4.1
16 20 70 2.90 85.78 5.8 4.2
14 17 82 1.05 66.50 3.1 1.1
16 19 74 1.20 59.59 3.2 1.1
18 22 64 1.35 51.80 3.3 1.2
20 25 58 1.50 46.42 3.4 1.3
22 27 52 1.65 42.00 3.4 1.3
CG012-14P-63-06F 9.9
25 30 47 1.85 37.64 3.4 1.3 162
CF012-14P-63-06F 11
28 34 41 2.10 33.09 3.5 1.4
31 38 37 2.35 29.65 3.5 1.4
36 45 32 2.70 25.50 3.5 1.4
37 46 31 1.35 25.05 3.5 1.3
47 58 24 2.75 19.51 3.6 1.4
21 26 54 1.60 66.50 3.4 1.3
24 29 49 1.75 59.59 3.4 1.3
27 33 42 2.05 51.80 3.5 1.4
CG012-14P-63-04E 9.5
30 37 38 2.25 46.42 3.5 1.4 162
CF012-14P-63-04E 11
33 41 34 2.50 42.00 3.5 1.4
37 46 31 2.80 37.64 3.5 1.4
56 69 20 2.05 25.05 3.6 1.4

Legend see page 29 ** ... auf Anfrage

www.weg.net WG20 Gear Units and Geared Motors 31

 PN = 0.12 kW IE3
50 Hz 60 Hz at 50 Hz

0.12 kW 0.14 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
19 24 59 0.90 47.44 3.6 1.1
22 27 52 1.00 42.34 3.6 1.2
25 31 46 1.10 36.85 3.7 1.3
28 35 41 1.25 32.89 3.7 1.3

C 32
35
39
44
36
32
1.40
1.55
29.33
26.18
3.7
3.7
1.3
1.4
CG002-14P-63-06F 8.8
40 50 28 1.80 23.00 3.8 1.4 160
CF002-14P-63-06F 10
45 56 25 2.00 20.53 3.8 1.4
54 66 21 2.35 17.29 3.7 1.5
55 68 21 1.50 16.86 3.7 1.4
60 74 19 2.65 15.43 3.6 1.5
68 84 17 3.00 13.54 3.5 1.5
71 87 16 2.70 13.10 3.4 1.4
30 36 39 1.30 47.44 3.7 1.3
33 41 35 1.45 42.34 3.7 1.3
38 47 30 1.70 36.85 3.8 1.4
43 52 27 1.90 32.89 3.8 1.4
48 59 24 2.10 29.33 3.8 1.4
54 66 21 2.35 26.18 3.7 1.4
61 75 19 2.70 23.00 3.6 1.5
68 84 17 3.00 20.53 3.5 1.5
81 100 14 3.55 17.29 3.3 1.5
83 102 14 2.30 16.86 3.2 1.5
91 111 13 4.00 15.43 3.2 1.5
CG002-14P-63-04E 8.4
104 127 11 4.55 13.54 3.0 1.5 160
CF002-14P-63-04E 9.7
107 131 11 4.05 13.10 3.0 1.5
116 142 10 5.10 12.08 2.9 1.5
135 165 9 5.30 10.42 2.8 1.5
141 173 8 6.15 9.97 2.8 1.6
158 193 7 6.90 8.90 2.7 1.6
172 210 7 6.75 8.17 2.6 1.5
204 250 6 8.75 6.88 2.5 1.6
229 280 5 10.00 6.14 2.4 1.6
292 357 4 9.95 4.81 2.2 1.6
397 486 3 12.15 3.54 2.0 1.6
575 704 2 15.60 2.44 1.7 1.6

Legend see page 29

32 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.18 kW IE3
50 Hz 60 Hz at 50 Hz

0.18 kW 0.22 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
0.07 0.09 21474 0.85 12662.22 101.9 21.0
0.08 0.10 18878 1.00 11217.58 110.7 23.3
0.09 0.11 16740 1.10 9998.22 116.7 25.3
0.10 0.12 15293 1.20 9181.16 120.2 26.6
0.12
0.13
0.14
0.16
12748
11532
1.45
1.60
7752.38
7067.08
125.4
127.4
28.9
30.0
CG165-14P-71-06E
CF165-14P-71-06E
698
721
194 C
0.14 0.17 10247 1.80 6345.03 129.4 31.2
0.17 0.21 8468 2.15 5339.57 131.7 32.8
0.18 0.23 7666 2.35 4884.00 132.5 33.5
0.21 0.25 6735 2.70 4369.98 133.4 34.4
0.08 0.09 20212 0.90 18322.05 106.4 22.1
0.09 0.11 16907 1.10 15484.09 116.3 25.1
0.10 0.12 15757 1.15 14467.28 119.1 26.2
0.11 0.13 13650 1.35 12662.22 123.7 28.1
0.12 0.15 11968 1.55 11217.58 126.7 29.6 CG165-14P-63-04F 695
194
0.14 0.17 10558 1.75 9998.22 128.9 30.9 CF165-14P-63-04F 718
0.15 0.19 9620 1.90 9181.16 130.2 31.8
0.18 0.22 7956 2.30 7752.38 132.2 33.3
0.20 0.24 7159 2.55 7067.08 133.0 34.0
0.22 0.27 6328 2.85 6345.03 133.8 34.8
0.48 0.59 3050 2.65 1891.77 73.7 26.0 CG134-14P-71-06E 287
184
CF134-14P-71-06E 289
0.34 0.42 4551 1.00 2636.78 35.3 21.4
0.40 0.50 3816 1.20 2229.16 38.6 22.3
0.42 0.51 3684 1.25 2156.24 39.1 22.5
0.49 0.61 3082 1.50 1822.91 41.1 23.3
CG104-14P-71-06E 173
0.53 0.65 2867 1.60 1702.59 41.8 23.6 180
CF104-14P-71-06E 177
0.63 0.77 2394 1.90 1439.39 42.9 24.2
0.68 0.84 2178 2.10 1320.15 43.4 24.4
0.81 0.99 1811 2.50 1116.07 44.1 24.9
0.83 1.0 1746 2.60 1080.49 44.2 25.0
0.52 0.64 2896 1.60 2636.78 41.7 23.5
0.62 0.76 2418 1.90 2229.16 42.9 24.1
CG104-14P-63-04F 170
0.64 0.79 2334 1.95 2156.24 43.1 24.2 180
CF104-14P-63-04F 174
0.76 0.93 1941 2.35 1822.91 43.9 24.7
0.81 1.0 1801 2.50 1702.59 44.1 24.9
0.40 0.49 3947 0.80 2268.18 12.8 24.2
0.42 0.52 3689 0.85 2124.27 16.5 24.5
0.49 0.60 3208 0.95 1854.82 21.3 25.3
0.54 0.66 2889 1.05 1677.34 23.7 25.7
0.55 0.68 2825 1.10 1643.20 24.1 25.8
0.61 0.76 2507 1.20 1464.58 25.9 26.3
0.67 0.83 2288 1.35 1344.90 27.0 26.6
0.69 0.85 2208 1.40 1300.57 27.4 26.7 CG094-14P-71-06E 130
176
0.79 0.98 1912 1.60 1135.60 28.6 27.2 CF094-14P-71-06E 128
0.85 1.0 1785 1.70 1064.47 29.0 27.4
0.87 1.1 1732 1.75 1035.22 29.2 27.4
0.97 1.2 1543 1.95 929.45 29.8 27.7
1.1 1.4 1343 2.25 819.36 30.3 28.0
1.2 1.4 1277 2.35 782.16 30.4 28.1
1.3 1.6 1156 2.60 715.43 30.7 28.3
1.4 1.7 1019 2.95 640.13 31.0 28.5

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 33

 PN = 0.18 kW IE3
50 Hz 60 Hz at 50 Hz

0.18 kW 0.22 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
0.42 0.52 3717 0.85 3282.02 16.1 24.5
0.51 0.63 3021 1.00 2683.89 22.7 25.5
0.53 0.65 2918 1.05 2597.68 23.5 25.7
0.61 0.75 2532 1.20 2268.18 25.8 26.3

C 0.65
0.74
0.80
0.92
2362
2045
1.30
1.50
2124.27
1854.82
26.7
28.1
26.5
27.0
CG094-14P-63-04F 128
0.82 1.0 1838 1.65 1677.34 28.8 27.3 176
CF094-14P-63-04F 126
0.84 1.0 1797 1.70 1643.20 29.0 27.3
0.94 1.2 1589 1.90 1464.58 29.6 27.7
1.0 1.3 1447 2.10 1344.90 30.0 27.9
1.1 1.3 1396 2.15 1300.57 30.1 27.9
1.2 1.5 1201 2.50 1135.60 30.6 28.2
1.3 1.6 1117 2.70 1064.47 30.8 28.4
2.4 3.0 705 2.20 368.94 23.7 21.1 CG083-14P-71-06E 65
172
3.2 3.9 544 2.85 284.84 24.0 21.4 CF083-14P-71-06E 69
2.6 3.2 671 1.25 351.33 11.9 13.5
2.8 3.5 610 1.35 319.60 12.3 13.5
3.2 4.0 532 1.55 278.44 12.7 13.9
3.6 4.4 484 1.70 253.30 13.0 13.9 CG073-14P-71-06E 41
170
4.2 5.1 413 2.00 216.20 13.3 14.3 CF073-14P-71-06E 45
4.6 5.6 376 2.20 196.68 13.4 14.3
5.1 6.3 339 2.45 177.39 13.5 14.5
5.6 6.9 308 2.70 161.38 13.6 14.5
3.9 4.8 438 1.90 351.33 13.2 14.2
4.3 5.3 398 2.10 319.60 13.3 14.2 CG073-14P-63-04F 38
170
5.0 6.1 347 2.40 278.44 13.5 14.4 CF073-14P-63-04F 42
5.4 6.7 316 2.60 253.30 13.6 14.4
2.4 3.0 718 0.85 375.71 6.6 6.0
2.6 3.2 658 0.95 344.51 7.5 6.2
2.9 3.6 587 1.05 307.24 8.4 6.4
3.2 3.9 538 1.15 281.73 8.9 6.5
3.7 4.6 463 1.30 242.60 9.6 6.8
4.0 5.0 425 1.45 222.46 9.9 6.9 CG063-14P-71-06E 24
168
4.8 5.9 359 1.70 188.11 10.3 7.1 CF063-14P-71-06E 29
5.2 6.4 329 1.85 172.49 10.4 7.1
5.8 7.2 294 2.05 153.96 10.6 7.2
6.4 7.9 270 2.25 141.17 10.7 7.3
7.6 9.4 226 2.70 118.51 10.9 7.4
8.3 10 208 2.90 108.67 10.9 7.5
3.7 4.5 468 1.30 375.71 9.6 6.7
4.0 4.9 429 1.40 344.51 9.8 6.8
4.5 5.5 383 1.60 307.24 10.1 7.0
4.9 6.0 351 1.75 281.73 10.3 7.1 CG063-14P-63-04F 22
168
5.7 7.0 302 2.00 242.60 10.6 7.2 CF063-14P-63-04F 27
6.2 7.6 277 2.20 222.46 10.7 7.3
7.3 9.0 234 2.60 188.11 10.8 7.4
8.0 9.9 215 2.80 172.49 10.9 7.5
3.4 4.1 512 0.80 267.93 1.5 5.8
3.7 4.6 465 0.90 243.57 3.5 6.0
4.2 5.2 408 1.00 213.71 4.8 6.2
4.6 5.7 371 1.10 194.29 5.4 6.4
5.4 6.7 316 1.30 165.45 6.1 6.7
6.0 7.4 287 1.40 150.41 6.4 6.8 CG053-14P-71-06E 19
166
6.8 8.3 254 1.60 132.97 6.7 6.9 CF053-14P-71-06E 24
7.4 9.2 231 1.75 120.88 6.9 7.0
8.9 11 194 2.10 101.55 7.2 7.2
9.7 12 176 2.30 92.32 7.3 7.3
12 14 149 2.70 77.79 7.4 7.4
13 16 135 3.00 70.71 7.5 7.5

Legend see page 29

34 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.18 kW IE3
50 Hz 60 Hz at 50 Hz

0.18 kW 0.22 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
4.2 5.2 409 1.00 328.43 4.8 6.2
4.6 5.7 372 1.10 298.57 5.4 6.4
5.2 6.3 334 1.20 267.93 5.9 6.6
5.7 7.0 303 1.35 243.57 6.3 6.7
6.5
7.1
8.0
8.8
266
242
1.55
1.70
213.71
194.29
6.6
6.8
6.9
7.0
CG053-14P-63-04F
CF053-14P-63-04F
17
22
166 C
8.3 10 206 1.95 165.45 7.1 7.2
9.2 11 187 2.15 150.41 7.2 7.2
10 13 166 2.45 132.97 7.3 7.3
11 14 151 2.70 120.88 7.4 7.4
15 19 112 2.25 58.85 7.5 7.6
17 21 102 2.25 53.50 7.6 7.6 CG052-14P-71-06E 19
166
25 31 68 2.25 35.67 7.7 7.7 CF052-14P-71-06E 24
29 36 59 2.25 31.03 7.7 7.7
7.0 8.6 247 0.85 129.39 4.0 3.0
8.2 10 210 1.00 109.79 4.6 3.3
9.0 11 190 1.10 99.71 4.9 3.4
10 13 164 1.25 85.78 5.2 3.6
12 14 149 1.35 77.90 5.3 3.7 CG033-14P-71-06E 15
164
14 17 122 1.65 64.05 5.5 3.8 CF033-14P-71-06E 17
15 19 111 1.85 58.17 5.6 3.9
19 23 92 2.20 48.22 5.7 4.0
21 25 84 2.40 43.79 5.7 4.1
25 31 68 3.00 35.38 5.8 4.2
6.8 8.4 252 0.80 202.55 3.9 3.0
7.6 9.4 225 0.90 180.83 4.4 3.2
8.4 10 205 1.00 164.23 4.7 3.3
9.7 12 177 1.15 142.47 5.0 3.5
11 13 161 1.25 129.39 5.2 3.6
CG033-14P-63-04F 12
13 15 137 1.50 109.79 5.4 3.7 164
CF033-14P-63-04F 14
14 17 124 1.65 99.71 5.5 3.8
16 20 107 1.90 85.78 5.6 3.9
18 22 97 2.10 77.90 5.7 4.0
22 27 80 2.55 64.05 5.8 4.1
24 29 72 2.80 58.17 5.8 4.1
21 26 82 2.25 42.88 5.7 4.1
23 29 74 2.30 38.95 5.8 4.1 CG032-14P-71-06E 15
164
37 46 46 2.25 24.03 5.9 4.3 CF032-14P-71-06E 17
43 53 40 2.25 20.95 5.9 4.3
17 21 99 0.90 51.80 2.8 1.0
19 24 89 1.00 46.42 3.0 1.0
21 26 80 1.10 42.00 3.1 1.1
24 29 72 1.20 37.64 3.2 1.2
27 34 63 1.35 33.09 3.3 1.2
30 37 57 1.55 29.65 3.4 1.3
35 44 49 1.75 25.50 3.4 1.3
CG012-14P-71-06E 12
36 44 48 0.90 25.05 3.4 1.2 162
CF012-14P-71-06E 13
39 49 44 1.95 22.85 3.5 1.3
45 56 38 2.25 19.92 3.5 1.4
46 57 37 1.80 19.51 3.5 1.3
50 62 34 2.50 17.85 3.5 1.4
57 70 30 2.20 15.82 3.5 1.4
61 75 28 3.00 14.88 3.5 1.4
72 89 24 2.80 12.46 3.5 1.4

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 35

 PN = 0.18 kW IE3
50 Hz 60 Hz at 50 Hz

0.18 kW 0.22 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
21 26 83 1.05 66.50 3.1 1.1
23 29 74 1.15 59.59 3.2 1.1
27 33 65 1.35 51.80 3.3 1.2
30 37 58 1.50 46.42 3.4 1.2

C 33
37
40
45
52
47
1.65
1.85
42.00
37.64
3.4
3.4
1.3
1.3 CG012-14P-63-04F 9.7
162
42 51 41 2.10 33.09 3.5 1.4 CF012-14P-63-04F 11
47 57 37 2.35 29.65 3.5 1.4
54 67 32 2.70 25.50 3.5 1.4
55 68 31 1.35 25.05 3.5 1.3
60 74 28 3.00 22.85 3.5 1.4
71 87 24 2.75 19.51 3.6 1.4
27 34 63 0.80 32.89 3.6 1.1
31 38 56 0.90 29.33 3.6 1.2
34 42 50 1.00 26.18 3.7 1.2
39 48 44 1.15 23.00 3.7 1.3
44 54 39 1.30 20.53 3.7 1.3
52 64 33 1.55 17.29 3.7 1.4
53 66 32 1.00 16.86 3.6 1.2
CG002-14P-71-06E 11
58 72 29 1.70 15.43 3.6 1.4 160
CF002-14P-71-06E 12
66 82 26 1.95 13.54 3.4 1.4
69 85 25 1.75 13.10 3.4 1.3
74 92 23 2.20 12.08 3.3 1.4
86 106 20 2.30 10.42 3.1 1.4
90 111 19 2.65 9.97 3.1 1.5
101 125 17 2.95 8.90 3.0 1.5
110 136 16 2.90 8.17 2.9 1.4
29 36 59 0.85 47.44 3.6 1.1
33 40 53 0.95 42.34 3.6 1.2
37 46 46 1.10 36.85 3.7 1.3
42 52 41 1.25 32.89 3.7 1.3
47 58 37 1.40 29.33 3.7 1.3
53 65 33 1.55 26.18 3.7 1.4
60 74 29 1.75 23.00 3.5 1.4
67 83 26 2.00 20.53 3.4 1.4
80 98 22 2.35 17.29 3.3 1.4
82 101 21 1.50 16.86 3.2 1.4
89 110 19 2.65 15.43 3.1 1.5
CG002-14P-63-04F 8.6
102 126 17 3.00 13.54 3.0 1.5 160
CF002-14P-63-04F 9.9
105 130 16 2.65 13.10 3.0 1.4
114 141 15 3.35 12.08 2.9 1.5
132 163 13 3.50 10.42 2.8 1.5
138 171 12 4.05 9.97 2.8 1.5
155 191 11 4.55 8.90 2.7 1.5
169 208 10 4.45 8.17 2.6 1.5
201 247 9 5.75 6.88 2.4 1.6
225 277 8 6.55 6.14 2.4 1.6
287 353 6 6.55 4.81 2.2 1.6
390 480 4 7.95 3.54 2.0 1.6
565 696 3 10.20 2.44 1.7 1.6

Legend see page 29

36 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.25 kW IE3
50 Hz 60 Hz at 50 Hz

0.25 kW 0.30 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
0.10 0.12 22193 0.85 9998.22 99.1 20.3
0.12 0.15 16989 1.10 7752.38 116.0 25.1
0.14 0.17 15408 1.20 7067.08 119.9 26.5
0.15 0.19 13727 1.35 6345.03 123.5 28.0

C
CG165-14P-80-06D 698
0.18 0.22 11404 1.60 5339.57 127.6 30.1 194
CF165-14P-80-06D 721
0.20 0.24 10351 1.75 4884.00 129.2 31.1
0.22 0.27 9142 2.00 4369.98 130.9 32.2
0.26 0.32 7561 2.40 3690.13 132.6 33.6
0.27 0.33 7223 2.50 3543.61 133.0 33.9
0.09 0.11 23846 0.80 15484.09 92.0 18.8
0.10 0.12 22224 0.85 14467.28 99.0 20.3
0.11 0.13 19351 0.95 12662.22 109.3 22.9
0.12 0.15 17012 1.10 11217.58 116.0 25.0
0.14 0.17 15085 1.20 9998.22 120.6 26.8
0.15 0.19 13746 1.35 9181.16 123.5 28.0 CG165-14P-71-04E 696
194
0.18 0.22 11458 1.60 7752.38 127.6 30.1 CF165-14P-71-04E 719
0.20 0.24 10365 1.75 7067.08 129.2 31.1
0.22 0.27 9186 2.00 6345.03 130.8 32.2
0.26 0.32 7572 2.40 5339.57 132.6 33.6
0.28 0.35 6836 2.65 4884.00 133.3 34.3
0.32 0.39 6006 3.00 4369.98 134.1 35.0
0.44 0.55 4516 2.90 2162.84 109.7 23.0 CG144-14P-80-06D 434
188
CF144-14P-80-06D 452
0.50 0.63 4110 1.95 1891.77 72.2 24.8
0.58 0.72 3516 2.30 1642.17 73.1 25.5 CG134-14P-80-06D 287
184
0.65 0.81 3088 2.60 1460.54 73.6 26.0 CF134-14P-80-06D 289
0.67 0.84 2988 2.70 1418.83 73.7 26.1
0.73 0.90 2728 2.95 1891.77 74.0 26.4 CG134-14P-71-04E 285
184
CF134-14P-71-04E 287
0.43 0.53 5057 0.90 2229.16 32.4 20.8
0.44 0.55 4881 0.95 2156.24 33.4 21.0
0.52 0.65 4101 1.10 1822.91 37.4 22.0
0.56 0.70 3815 1.20 1702.59 38.6 22.3
0.66 0.82 3192 1.45 1439.39 40.8 23.1 CG104-14P-80-06D 173
180
0.72 0.90 2916 1.55 1320.15 41.6 23.5 CF104-14P-80-06D 177
0.86 1.1 2435 1.85 1116.07 42.9 24.1
0.88 1.1 2347 1.95 1080.49 43.0 24.2
1.0 1.3 1952 2.35 913.46 43.8 24.7
1.1 1.4 1759 2.60 831.69 44.2 25.0
0.52 0.64 4106 1.10 2636.78 37.4 22.0
0.62 0.76 3435 1.35 2229.16 40.0 22.8
0.64 0.79 3316 1.40 2156.24 40.4 23.0
0.76 0.93 2775 1.65 1822.91 42.0 23.7
CG104-14P-71-04E 171
0.81 1.0 2581 1.75 1702.59 42.5 23.9 180
CF104-14P-71-04E 175
0.96 1.2 2151 2.10 1439.39 43.5 24.5
1.0 1.3 1952 2.35 1320.15 43.8 24.7
1.2 1.5 1620 2.80 1116.07 44.4 25.1
1.3 1.6 1561 2.90 1080.49 44.5 25.2
0.57 0.71 3821 0.80 1677.34 14.8 24.4
0.58 0.72 3735 0.85 1643.20 15.9 24.5
0.65 0.81 3316 0.95 1464.58 20.4 25.1
0.71 0.88 3038 1.00 1344.90 22.6 25.5
0.73 0.91 2932 1.05 1300.57 23.4 25.7
0.84 1.0 2545 1.20 1135.60 25.7 26.2
0.90 1.1 2375 1.30 1064.47 26.6 26.5 CG094-14P-80-06D 131
176
0.92 1.1 2310 1.30 1035.22 26.9 26.6 CF094-14P-80-06D 129
1.0 1.3 2057 1.50 929.45 28.0 27.0
1.2 1.4 1799 1.70 819.36 29.0 27.3
1.3 1.7 1554 1.95 715.43 29.7 27.7
1.5 1.9 1376 2.20 640.13 30.2 28.0
1.8 2.2 1141 2.65 540.55 30.7 28.3
1.9 2.3 1060 2.85 506.66 30.9 28.4

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 37

 PN = 0.25 kW IE3
50 Hz 60 Hz at 50 Hz

0.25 kW 0.30 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
0.61 0.75 3568 0.85 2268.18 17.9 24.7
0.65 0.80 3335 0.90 2124.27 20.2 25.1
0.74 0.92 2894 1.05 1854.82 23.6 25.7
0.82 1.0 2601 1.20 1677.34 25.4 26.2

C 0.84
0.94
1.0
1.2
2548
2257
1.20
1.35
1643.20
1464.58
25.7
27.2
26.2
26.7
1.0 1.3 2060 1.50 1344.90 28.0 27.0 CG094-14P-71-04E 128
176
1.1 1.3 1988 1.55 1300.57 28.3 27.1 CF094-14P-71-04E 126
1.2 1.5 1721 1.75 1135.60 29.2 27.5
1.3 1.6 1604 1.90 1064.47 29.6 27.6
1.5 1.8 1383 2.20 929.45 30.2 28.0
1.7 2.1 1204 2.50 819.36 30.6 28.2
1.8 2.2 1142 2.65 782.16 30.7 28.3
1.9 2.4 1032 2.95 715.43 30.9 28.5
2.6 3.2 922 1.70 368.94 23.1 20.6
CG083-14P-80-06D 65
3.4 4.2 712 2.20 284.84 23.7 21.0 172
CF083-14P-80-06D 69
4.0 5.0 597 2.60 238.89 23.9 21.3
3.7 4.6 638 2.45 368.94 23.9 21.2 CG083-14P-71-04E 63
172
CF083-14P-71-04E 67
2.7 3.4 878 0.95 351.33 10.1 13.0
3.0 3.7 799 1.05 319.60 10.9 13.0
3.4 4.3 696 1.20 278.44 11.7 13.5
3.8 4.7 633 1.30 253.30 12.2 13.5
4.4 5.5 541 1.55 216.20 12.7 13.9 CG073-14P-80-06D 41
170
4.9 6.0 492 1.70 196.68 12.9 13.9 CF073-14P-80-06D 45
5.4 6.7 443 1.85 177.39 13.2 14.2
5.9 7.3 403 2.05 161.38 13.3 14.2
7.0 8.6 343 2.40 137.38 13.5 14.5
7.6 9.5 312 2.65 124.97 13.6 14.4
3.9 4.8 608 1.35 351.33 12.3 13.7
4.3 5.3 553 1.50 319.60 12.6 13.7
5.0 6.1 482 1.75 278.44 13.0 14.1
5.4 6.7 438 1.90 253.30 13.2 14.1 CG073-14P-71-04E 39
170
6.4 7.9 374 2.20 216.20 13.4 14.4 CF073-14P-71-04E 43
7.0 8.6 340 2.45 196.68 13.5 14.4
7.8 9.6 307 2.70 177.39 13.6 14.6
8.6 11 279 2.95 161.38 13.7 14.5
3.1 3.9 768 0.80 307.24 5.6 5.9
3.4 4.2 704 0.90 281.73 6.8 6.0
3.9 4.9 606 1.00 242.60 8.2 6.3
4.3 5.3 556 1.10 222.46 8.8 6.5
5.1 6.3 470 1.30 188.11 9.5 6.7
5.5 6.9 431 1.40 172.49 9.8 6.8 CG063-14P-80-06D 25
168
6.2 7.7 385 1.60 153.96 10.1 7.0 CF063-14P-80-06D 30
6.8 8.4 353 1.75 141.17 10.3 7.1
8.1 10 296 2.05 118.51 10.6 7.2
8.8 11 272 2.25 108.67 10.7 7.3
11 13 224 2.70 89.54 10.9 7.5
12 14 205 2.95 82.10 10.9 7.5
3.7 4.5 650 0.95 375.71 7.7 6.2
4.0 4.9 596 1.05 344.51 8.3 6.4
4.5 5.5 532 1.15 307.24 9.0 6.6
4.9 6.0 487 1.25 281.73 9.4 6.7
5.7 7.0 420 1.45 242.60 9.9 6.9
CG063-14P-71-04E 22
6.2 7.6 385 1.60 222.46 10.1 7.0 168
CF063-14P-71-04E 27
7.3 9.0 325 1.85 188.11 10.5 7.2
8.0 9.9 298 2.05 172.49 10.6 7.2
9.0 11 266 2.30 153.96 10.7 7.3
9.8 12 244 2.50 141.17 10.8 7.4
12 14 205 2.95 118.51 10.9 7.5
16 20 150 2.80 60.00 11.1 7.7
17 22 138 2.80 55.02 11.1 7.7 CG062-14P-80-06D 24
168
29 35 84 2.85 33.43 11.2 7.8 CF062-14P-80-06D 29
32 40 74 2.85 29.67 11.2 7.8

38 WG20 Gear Units and Geared Motors www.weg.net

PN = 0.25 kW IE3
50 Hz 60 Hz at 50 Hz

0.25 kW 0.30 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
4.9 6.1 486 0.85 194.29 2.8 5.9
5.8 7.2 414 1.00 165.45 4.7 6.2
6.3 7.9 376 1.10 150.41 5.4 6.4
7.2 8.9 332 1.25 132.97 6.0 6.6
7.9
9.4
9.8
12
302
254
1.35
1.60
120.88
101.55
6.3
6.7
6.7
6.9
CG053-14P-80-06D 20
166
C
CF053-14P-80-06D 25
10 13 231 1.75 92.32 6.9 7.0
12 15 194 2.10 77.79 7.2 7.2
14 17 177 2.30 70.71 7.3 7.3
15 19 154 2.60 61.63 7.4 7.4
17 21 140 2.90 56.02 7.4 7.5
4.6 5.7 517 0.80 298.57 1.1 5.7
5.2 6.3 464 0.90 267.93 3.6 6.0
5.7 7.0 421 0.95 243.57 4.6 6.2
6.5 8.0 370 1.10 213.71 5.4 6.4
7.1 8.8 336 1.20 194.29 5.9 6.5
8.3 10 286 1.40 165.45 6.5 6.8 CG053-14P-71-04E 18
166
9.2 11 260 1.55 150.41 6.7 6.9 CF053-14P-71-04E 23
10 13 230 1.75 132.97 6.9 7.1
11 14 209 1.95 120.88 7.1 7.1
14 17 176 2.30 101.55 7.3 7.3
15 18 160 2.55 92.32 7.3 7.4
18 22 135 3.00 77.79 7.5 7.5
16 20 147 1.70 58.85 7.4 7.4
18 22 134 1.70 53.50 7.5 7.5
20 25 120 2.85 48.13 7.5 7.6
22 27 109 2.85 43.75 7.5 7.6 CG052-14P-80-06D 19
166
27 33 89 1.70 35.67 7.6 7.6 CF052-14P-80-06D 24
31 38 78 1.75 31.03 7.6 7.6
33 41 73 2.80 29.17 7.6 7.7
38 47 63 2.85 25.38 7.7 7.7
23 29 102 2.50 58.85 7.6 7.6
26 32 93 2.50 53.50 7.6 7.7 CG052-14P-71-04E 17
166
39 48 62 2.45 35.67 7.7 7.7 CF052-14P-71-04E 22
44 55 54 2.50 31.03 7.7 7.8
9.6 12 249 0.85 99.71 3.9 3.0
11 14 214 0.95 85.78 4.5 3.3
12 15 195 1.05 77.90 4.8 3.4
15 19 160 1.25 64.05 5.2 3.6
16 20 145 1.40 58.17 5.3 3.7
CG033-14P-80-06D 16
17 21 138 1.45 55.25 5.4 3.7 164
CF033-14P-80-06D 18
19 24 125 1.60 50.18 5.5 3.8
20 25 121 1.70 48.22 5.5 3.8
22 27 109 1.85 43.79 5.6 3.9
27 34 88 2.30 35.38 5.7 4.0
30 37 80 2.50 32.13 5.8 4.1
9.7 12 246 0.85 142.47 4.0 3.1
11 13 224 0.90 129.39 4.4 3.2
13 15 190 1.10 109.79 4.9 3.4
14 17 173 1.20 99.71 5.1 3.5
16 20 148 1.35 85.78 5.3 3.7 CG033-14P-71-04E 13
164
18 22 135 1.50 77.90 5.4 3.7 CF033-14P-71-04E 15
22 27 111 1.85 64.05 5.6 3.9
24 29 101 2.00 58.17 5.7 4.0
29 35 83 2.40 48.22 5.7 4.1
32 39 76 2.65 43.79 5.8 4.1
22 28 107 1.75 42.88 5.6 3.9
25 30 97 1.75 38.95 5.7 4.0
27 34 87 2.30 34.88 5.7 4.1
30 37 79 2.55 31.67 5.8 4.1
CG032-14P-80-06D 15
34 43 69 2.90 27.71 5.8 4.2 164
CF032-14P-80-06D 17
40 49 60 1.75 24.03 5.8 4.1
46 57 52 1.75 20.95 5.7 4.2
49 61 49 2.65 19.54 5.6 4.2
56 70 43 2.65 17.04 5.4 4.3

www.weg.net WG20 Gear Units and Geared Motors 39

 PN = 0.25 kW IE3
50 Hz 60 Hz at 50 Hz

0.25 kW 0.30 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
32 40 74 2.50 42.88 5.8 4.1
35 44 67 2.50 38.95 5.8 4.2 CG032-14P-71-04E 13
164
57 71 42 2.50 24.03 5.3 4.3 CF032-14P-71-04E 15
66 81 36 2.50 20.95 5.1 4.3

C 23
25
28
32
105
94
0.85
0.95
42.00
37.64
2.7
2.9
1.0
1.0
29 36 83 1.05 33.09 3.1 1.1
32 40 74 1.15 29.65 3.2 1.1
37 47 64 1.35 25.50 3.3 1.2
42 52 57 1.50 22.85 3.4 1.3
48 60 50 1.75 19.92 3.4 1.3
49 61 49 1.40 19.51 3.4 1.2
CG012-14P-80-06D 13
53 66 45 1.95 17.85 3.5 1.3 162
CF012-14P-80-06D 14
60 75 40 1.70 15.82 3.5 1.3
64 80 37 2.30 14.88 3.5 1.4
72 89 33 2.60 13.33 3.5 1.4
74 92 32 2.65 12.83 3.5 1.4
77 95 31 2.15 12.46 3.4 1.3
83 103 29 3.00 11.50 3.4 1.4
85 106 28 3.00 11.20 3.3 1.4
99 123 24 2.75 9.60 3.2 1.4
23 29 103 0.85 59.59 2.8 1.0
27 33 90 0.95 51.80 3.0 1.0
30 37 80 1.10 46.42 3.1 1.1
33 40 73 1.20 42.00 3.2 1.2
37 45 65 1.35 37.64 3.3 1.2
42 51 57 1.50 33.09 3.4 1.3
47 57 51 1.70 29.65 3.4 1.3 CG012-14P-71-04E 11
162
54 67 44 1.95 25.50 3.5 1.3 CF012-14P-71-04E 12
55 68 43 0.95 25.05 3.5 1.2
60 74 40 2.20 22.85 3.5 1.4
69 85 34 2.50 19.92 3.5 1.4
71 87 34 2.00 19.51 3.5 1.3
77 95 31 2.80 17.85 3.4 1.4
87 107 27 2.45 15.82 3.3 1.4
36 45 65 0.80 26.18 3.5 1.1
42 52 58 0.90 23.00 3.6 1.2
47 58 51 1.00 20.53 3.6 1.2
55 69 43 1.20 17.29 3.6 1.3
62 77 39 1.30 15.43 3.4 1.3
71 88 34 1.50 13.54 3.3 1.3
73 91 33 1.35 13.10 3.2 1.2 CG002-14P-80-06D 12
160
79 98 30 1.70 12.08 3.2 1.4 CF002-14P-80-06D 13
92 114 26 1.75 10.42 3.0 1.3
96 119 25 2.05 9.97 3.0 1.4
107 133 22 2.25 8.90 2.9 1.4
117 145 20 2.25 8.17 2.8 1.4
139 173 17 2.90 6.88 2.7 1.5
155 193 15 2.75 6.14 2.6 1.4

Legend see page 29

40 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.25 kW IE3
50 Hz 60 Hz at 50 Hz

0.25 kW 0.30 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
37 46 64 0.80 36.85 3.5 1.1
42 52 57 0.90 32.89 3.6 1.2
47 58 51 1.00 29.33 3.6 1.2
53 65 45 1.15 26.18 3.6 1.2
60
67
74
83
40
36
1.30
1.45
23.00
20.53
3.5
3.4
1.3
1.3
C
80 98 30 1.70 17.29 3.2 1.4
82 101 29 1.10 16.86 3.1 1.3
89 110 27 1.90 15.43 3.1 1.4
102 126 23 2.15 13.54 3.0 1.4
CG002-14P-71-04E 9.5
105 130 23 1.90 13.10 2.9 1.4 160
CF002-14P-71-04E 11
114 141 21 2.40 12.08 2.9 1.5
132 163 18 2.50 10.42 2.7 1.4
138 171 17 2.90 9.97 2.7 1.5
155 191 15 3.25 8.90 2.6 1.5
169 208 14 3.20 8.17 2.5 1.5
201 247 12 4.15 6.88 2.4 1.5
225 277 11 4.75 6.14 2.3 1.5
287 353 8 4.70 4.81 2.1 1.5
390 480 6 5.75 3.54 2.0 1.6
565 696 4 7.35 2.44 1.7 1.6

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 41

 PN = 0.37 kW IE3
50 Hz 60 Hz at 50 Hz

0.37 kW 0.44 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
0.15 0.18 21521 0.85 6345.03 101.8 20.9
0.17 0.21 17926 1.05 5339.57 113.5 24.2
0.19 0.23 16312 1.15 4884.00 117.8 25.7
0.21 0.26 14521 1.25 4369.98 121.9 27.3

C
CG165-14P-80-06E 700
0.25 0.31 12105 1.50 3690.13 126.5 29.5 194
CF165-14P-80-06E 723
0.26 0.32 11565 1.60 3543.61 127.4 30.0
0.31 0.38 9704 1.90 3020.06 130.1 31.7
0.38 0.47 7688 2.35 2448.96 132.5 33.5
0.45 0.56 6253 2.90 2050.07 133.9 34.8
0.14 0.17 22544 0.80 9998.22 97.7 20.0
0.15 0.19 20596 0.90 9181.16 105.1 21.8
0.18 0.22 17257 1.05 7752.38 115.3 24.8
0.20 0.24 15611 1.20 7067.08 119.4 26.3
0.22 0.27 13944 1.30 6345.03 123.1 27.8 CG165-14P-71-04F 697
194
0.26 0.32 11555 1.60 5339.57 127.4 30.0 CF165-14P-71-04F 720
0.29 0.35 10487 1.75 4884.00 129.0 31.0
0.32 0.39 9287 1.95 4369.98 130.7 32.1
0.38 0.46 7681 2.35 3690.13 132.5 33.5
0.46 0.57 6077 3.00 3020.06 134.0 35.0
0.44 0.54 6737 2.70 2093.95 133.4 34.4 CG164-14P-80-06E 687
192
CF164-14P-80-06E 710
0.43 0.53 7224 1.80 2162.84 107.1 20.3
0.49 0.60 6221 2.10 1885.79 108.2 21.3
0.55 0.68 5440 2.40 1669.82 109.0 22.0 CG144-14P-80-06E 436
188
0.57 0.70 5270 2.50 1624.38 109.1 22.2 CF144-14P-80-06E 454
0.64 0.78 4665 2.80 1455.92 109.6 22.8
0.66 0.81 4459 2.95 1400.42 109.8 23.0
0.64 0.79 4586 2.85 2162.84 109.7 22.9 CG144-14P-71-04F 433
188
CF144-14P-71-04F 451
0.49 0.60 6464 1.25 1891.77 67.4 22.1
0.56 0.69 5565 1.45 1642.17 69.5 23.1
0.63 0.78 4909 1.65 1460.54 70.9 23.9
0.65 0.80 4759 1.70 1418.83 71.2 24.1
0.73 0.90 4217 1.90 1267.83 72.1 24.7 CG134-14P-80-06E 289
184
0.76 0.93 4058 2.00 1224.91 72.3 24.9 CF134-14P-80-06E 291
0.84 1.0 3591 2.25 1095.41 73.0 25.4
0.87 1.1 3479 2.30 1063.29 73.1 25.5
0.96 1.2 3106 2.60 961.31 73.6 26.0
1.0 1.2 2950 2.75 918.68 73.8 26.1
0.74 0.9 4164 1.95 1891.77 72.2 24.7
0.85 1.0 3570 2.25 1642.17 73.0 25.4
CG134-14P-71-04F 286
0.96 1.2 3129 2.60 1460.54 73.6 25.9 184
CF134-14P-71-04F 288
0.98 1.2 3033 2.65 1418.83 73.7 26.0
1.1 1.3 2671 3.00 1267.83 74.1 26.4
0.54 0.67 5926 0.80 1702.59 25.8 19.7
0.64 0.79 4979 0.95 1439.39 32.9 20.9
0.70 0.86 4557 1.00 1320.15 35.2 21.4
0.83 1.0 3821 1.20 1116.07 38.6 22.3
0.86 1.1 3692 1.25 1080.49 39.1 22.5
CG104-14P-80-06E 175
1.0 1.2 3089 1.50 913.46 41.1 23.3 180
CF104-14P-80-06E 179
1.1 1.4 2795 1.65 831.69 42.0 23.6
1.3 1.6 2334 1.95 703.12 43.1 24.2
1.5 1.8 2064 2.20 628.39 43.6 24.6
1.7 2.1 1713 2.65 531.25 44.2 25.0
1.8 2.2 1651 2.75 514.28 44.3 25.1

Legend see page 29

42 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.37 kW IE3
50 Hz 60 Hz at 50 Hz

0.37 kW 0.44 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
0.63 0.77 5124 0.90 2229.16 32.0 20.7
0.65 0.79 4946 0.95 2156.24 33.1 20.9
0.77 0.94 4156 1.10 1822.91 37.2 21.9
0.82 1.0 3865 1.20 1702.59 38.4 22.3
0.97
1.1
1.2
1.3
3241
2954
1.40
1.55
1439.39
1320.15
40.7
41.5
23.1
23.4
CG104-14P-80-06E
CF104-14P-80-06E
172
176
180 C
1.2 1.5 2467 1.85 1116.07 42.8 24.1
1.3 1.6 2383 1.90 1080.49 43.0 24.2
1.5 1.9 1982 2.30 913.46 43.8 24.7
1.7 2.1 1786 2.55 831.69 44.1 24.9
0.81 1.0 3952 0.80 1135.60 12.7 24.2
0.87 1.1 3697 0.85 1064.47 16.4 24.5
0.89 1.1 3596 0.85 1035.22 17.6 24.7
1.0 1.2 3215 0.95 929.45 21.2 25.3
1.1 1.4 2817 1.10 819.36 24.1 25.8
1.2 1.5 2684 1.15 782.16 24.9 26.0
1.3 1.6 2444 1.25 715.43 26.3 26.4
CG094-14P-80-06E 133
1.4 1.8 2174 1.40 640.13 27.5 26.8 176
CF094-14P-80-06E 131
1.5 1.8 2098 1.45 619.07 27.8 26.9
1.7 2.1 1813 1.70 540.55 28.9 27.3
1.8 2.2 1737 1.75 519.08 29.2 27.4
2.1 2.6 1459 2.10 442.39 30.0 27.8
2.3 2.8 1347 2.25 410.85 30.3 28.0
2.6 3.2 1159 2.60 358.73 30.7 28.3
2.7 3.3 1104 2.75 343.93 30.8 28.4
0.83 1.0 3871 0.80 1677.34 14.0 24.3
0.85 1.0 3792 0.80 1643.20 15.2 24.4
0.95 1.2 3366 0.90 1464.58 19.9 25.0
1.0 1.3 3078 1.00 1344.90 22.3 25.5
1.1 1.3 2971 1.05 1300.57 23.1 25.6
1.2 1.5 2578 1.20 1135.60 25.5 26.2
1.3 1.6 2412 1.25 1064.47 26.4 26.4
CG094-14P-71-04F 129
1.5 1.8 2089 1.45 929.45 27.9 26.9 176
CF094-14P-71-04F 127
1.7 2.1 1826 1.65 819.36 28.9 27.3
1.8 2.2 1736 1.75 782.16 29.2 27.4
1.9 2.4 1575 1.95 715.43 29.7 27.7
2.2 2.7 1397 2.15 640.13 30.1 27.9
2.3 2.8 1346 2.25 619.07 30.3 28.0
2.6 3.2 1158 2.60 540.55 30.7 28.3
2.8 3.4 1076 2.80 506.66 30.9 28.4
3.0 3.7 1172 2.60 306.73 30.7 28.3 CG093-14P-80-06E 120
174
CF093-14P-80-06E 118
2.5 3.1 1409 1.10 368.94 21.1 19.6
3.2 4.0 1088 1.45 284.84 22.5 20.3
CG083-14P-80-06E 67
3.9 4.8 913 1.70 238.89 23.2 20.6 172
CF083-14P-80-06E 71
4.9 6.1 716 2.20 187.48 23.7 21.0
6.4 7.9 553 2.85 144.69 24.0 21.4
3.8 4.6 935 1.70 368.94 23.1 20.6
CG083-14P-71-04F 64
4.9 6.0 721 2.15 284.84 23.7 21.0 172
CF083-14P-71-04F 68
5.8 7.2 605 2.60 238.89 23.9 21.3
3.3 4.1 1064 0.80 278.44 7.6 12.5
3.7 4.5 968 0.85 253.30 9.1 12.4
4.3 5.3 826 1.00 216.20 10.6 13.1
4.7 5.8 751 1.10 196.68 11.3 13.1
5.2 6.4 678 1.25 177.39 11.9 13.5
5.7 7.1 616 1.35 161.38 12.3 13.5 CG073-14P-80-06E 43
170
6.7 8.3 525 1.60 137.38 12.8 13.9 CF073-14P-80-06E 47
7.4 9.1 477 1.75 124.97 13.0 13.9
8.9 11 399 2.10 104.50 13.3 14.3
9.7 12 363 2.30 95.06 13.5 14.3
11 13 329 2.50 86.17 13.6 14.5
12 15 299 2.75 78.39 13.6 14.5

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 43

 PN = 0.37 kW IE3
50 Hz 60 Hz at 50 Hz

0.37 kW 0.44 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
4.0 4.9 890 0.95 351.33 10.0 12.9
4.4 5.4 810 1.05 319.60 10.8 12.9
5.0 6.1 705 1.20 278.44 11.7 13.5
5.5 6.8 642 1.30 253.30 12.1 13.4

C 6.5
7.1
7.9
8.7
548
498
1.50
1.65
216.20
196.68
12.7
12.9
13.9
13.9
CG073-14P-71-04F
CF073-14P-71-04F
40
44
170

7.9 9.6 449 1.85 177.39 13.1 14.2

8.6 11 409 2.05 161.38 13.3 14.2
10 12 348 2.40 137.38 13.5 14.4
11 14 317 2.60 124.97 13.6 14.4
4.9 6.1 719 0.85 188.11 6.6 6.0
5.4 6.6 659 0.95 172.49 7.5 6.2
6.0 7.4 588 1.05 153.96 8.4 6.4
6.6 8.1 539 1.15 141.17 8.9 6.5
7.8 9.6 453 1.35 118.51 9.7 6.8
8.5 10 415 1.45 108.67 9.9 6.9 CG063-14P-80-06E 27
168
10 13 342 1.80 89.54 10.4 7.1 CF063-14P-80-06E 32
11 14 314 1.95 82.10 10.5 7.2
13 16 280 2.15 73.28 10.7 7.3
14 17 257 2.35 67.19 10.8 7.3
16 19 227 2.65 59.42 10.9 7.4
17 21 208 2.90 54.49 10.9 7.5
4.5 5.6 778 0.80 307.24 5.4 5.8
5.0 6.1 714 0.85 281.73 6.7 6.0
5.8 7.0 614 1.00 242.60 8.1 6.3
6.3 7.7 563 1.10 222.46 8.7 6.4
7.4 9.1 476 1.30 188.11 9.5 6.7
8.1 9.9 437 1.40 172.49 9.8 6.8 CG063-14P-71-04F 23
168
9.1 11 390 1.55 153.96 10.1 7.0 CF063-14P-71-04F 28
9.9 12 358 1.70 141.17 10.3 7.1
12 14 300 2.00 118.51 10.6 7.2
13 16 275 2.20 108.67 10.7 7.3
16 19 227 2.65 89.54 10.9 7.4
17 21 208 2.90 82.10 10.9 7.5
15 19 229 1.85 60.00 10.9 7.4
17 21 210 1.85 55.02 10.9 7.5 CG062-14P-80-06E 26
168
28 34 128 1.85 33.43 11.1 7.6 CF062-14P-80-06E 31
31 38 113 1.85 29.67 11.2 7.6
23 29 152 2.80 60.00 11.1 7.7
25 31 139 2.80 55.02 11.1 7.7 CG062-14P-71-04F 23
168
42 51 85 2.80 33.43 11.2 7.7 CF062-14P-71-04F 28
47 58 75 2.80 29.67 11.2 7.8
7.0 8.6 508 0.80 132.97 1.8 5.8
7.7 9.4 462 0.90 120.88 3.6 6.0
9.1 11 388 1.05 101.55 5.2 6.3
10 12 353 1.15 92.32 5.7 6.5
12 15 297 1.35 77.79 6.3 6.8
13 16 270 1.50 70.71 6.6 6.9 CG053-14P-80-06E 22
166
15 18 235 1.70 61.63 6.9 7.0 CF053-14P-80-06E 27
17 20 214 1.90 56.02 7.0 7.1
19 23 188 2.15 49.20 7.2 7.2
21 25 171 2.35 44.73 7.3 7.3
23 28 154 2.60 40.33 7.4 7.4
25 31 140 2.90 36.67 7.4 7.5
7.2 8.8 492 0.85 194.29 2.6 5.8
8.4 10 419 1.00 165.45 4.6 6.2
9.3 11 381 1.05 150.41 5.3 6.3
10 13 337 1.20 132.97 5.9 6.6
12 14 306 1.35 120.88 6.3 6.7
CG053-14P-71-04F 19
14 17 257 1.60 101.55 6.7 6.9 166
CF053-14P-71-04F 24
15 19 234 1.75 92.32 6.9 7.0
18 22 197 2.05 77.79 7.1 7.2
20 24 179 2.25 70.71 7.2 7.3
23 28 156 2.60 61.63 7.4 7.4
25 31 142 2.85 56.02 7.4 7.4

44 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.37 kW IE3
50 Hz 60 Hz at 50 Hz

0.37 kW 0.44 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
16 19 225 1.15 58.85 7.0 7.1
17 21 204 1.15 53.50 7.1 7.2
19 24 184 1.85 48.13 7.2 7.3
21 26 167 1.85 43.75 7.3 7.3

C
CG052-14P-80-06E 21
24 30 145 2.80 38.00 7.4 7.4 166
CF052-14P-80-06E 26
26 32 136 1.15 35.67 7.5 7.3
30 37 119 1.15 31.03 7.5 7.4
32 39 111 1.85 29.17 7.5 7.5
36 45 97 1.85 25.38 7.6 7.5
24 29 149 1.70 58.85 7.4 7.4
26 32 136 1.70 53.50 7.5 7.5
29 36 122 2.80 48.13 7.5 7.5
32 39 111 2.80 43.75 7.5 7.6 CG052-14P-71-04F 18
166
39 48 90 1.70 35.67 7.6 7.6 CF052-14P-71-04F 23
45 55 79 1.70 31.03 7.6 7.6
48 59 74 2.80 29.17 7.6 7.7
55 67 64 2.80 25.38 7.7 7.7
14 18 245 0.85 64.05 4.0 3.1
16 20 222 0.95 58.17 4.4 3.2
17 21 211 0.95 55.25 4.6 3.3
18 23 192 1.05 50.18 4.9 3.4 CG033-14P-80-06E 17
164
19 24 184 1.10 48.22 4.9 3.5 CF033-14P-80-06E 19
21 26 167 1.20 43.79 5.1 3.5
26 32 135 1.50 35.38 5.4 3.8
29 35 123 1.65 32.13 5.5 3.8
14 17 253 0.80 99.71 3.9 3.0
16 20 217 0.95 85.78 4.5 3.2
18 22 197 1.05 77.90 4.8 3.3
22 27 162 1.25 64.05 5.2 3.6
CG033-14P-71-04F 14
24 29 147 1.40 58.17 5.3 3.7 164
CF033-14P-71-04F 16
29 35 122 1.65 48.22 5.5 3.8
32 39 111 1.85 43.79 5.6 3.9
39 48 90 2.25 35.38 5.7 4.0
43 53 81 2.50 32.13 5.7 4.1
22 27 164 1.15 42.88 5.2 3.6
24 29 149 1.15 38.95 5.3 3.7
27 33 133 1.55 34.88 5.4 3.8
29 36 121 1.70 31.67 5.5 3.8
33 41 106 1.90 27.71 5.6 3.9
37 45 96 2.10 25.17 5.7 4.0
38 47 92 1.15 24.03 5.7 3.9
43 53 82 2.45 21.40 5.7 4.1 CG032-14P-80-06E 17
164
44 54 80 1.15 20.95 5.6 4.0 CF032-14P-80-06E 19
47 58 75 1.75 19.54 5.5 4.0
48 59 74 2.70 19.44 5.5 4.1
54 67 65 1.75 17.04 5.3 4.1
60 73 59 2.20 15.53 5.1 4.2
68 84 52 2.25 13.54 4.9 4.2
77 95 46 2.85 11.99 4.8 4.3
88 109 40 2.90 10.46 4.6 4.3
33 40 109 1.70 42.88 5.6 3.9
36 44 99 1.75 38.95 5.7 4.0
40 49 88 2.30 34.88 5.7 4.0
44 54 80 2.50 31.67 5.6 4.1
CG032-14P-71-04F 14
50 62 70 2.85 27.71 5.5 4.2 164
CF032-14P-71-04F 16
58 71 61 1.70 24.03 5.2 4.1
67 82 53 1.70 20.95 5 4.2
71 88 49 2.60 19.54 4.9 4.2
82 100 43 2.60 17.04 4.7 4.3

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 45

 PN = 0.37 kW IE3
50 Hz 60 Hz at 50 Hz

0.37 kW 0.44 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
31 38 113 0.80 29.65 2.6 0.9
36 45 97 0.90 25.50 2.9 1.0
40 50 87 1.00 22.85 3.0 1.1
46 57 76 1.15 19.92 3.2 1.1

C 47
52
58
64
75
68
0.90
1.25
19.51
17.85
3.2
3.3
1.0
1.2
58 72 60 1.10 15.82 3.3 1.1
62 77 57 1.50 14.88 3.4 1.3
69 86 51 1.70 13.33 3.4 1.3 CG012-14P-80-06E 15
162
72 89 49 1.75 12.83 3.4 1.3 CF012-14P-80-06E 16
74 91 48 1.40 12.46 3.3 1.2
80 99 44 1.95 11.50 3.3 1.3
83 102 43 2.00 11.20 3.3 1.4
92 114 38 2.15 10.04 3.2 1.4
96 119 37 1.80 9.60 3.1 1.3
113 139 31 2.45 8.22 3.0 1.4
123 152 29 2.35 7.50 2.9 1.4
126 155 28 2.65 7.36 2.9 1.4
33 41 106 0.80 42.00 2.7 0.9
37 45 95 0.90 37.64 2.9 1.0
42 52 84 1.05 33.09 3.1 1.1
47 58 75 1.15 29.65 3.2 1.1
55 67 65 1.35 25.50 3.3 1.2
61 75 58 1.50 22.85 3.4 1.2
70 86 50 1.70 19.92 3.4 1.3
CG012-14P-71-04F 12
72 88 49 1.35 19.51 3.4 1.2 162
CF012-14P-71-04F 13
78 96 45 1.90 17.85 3.3 1.3
88 108 40 1.65 15.82 3.2 1.3
94 115 38 2.30 14.88 3.2 1.4
105 128 34 2.55 13.33 3.1 1.4
112 137 32 2.10 12.46 3.0 1.3
125 153 28 3.00 11.20 2.9 1.4
145 178 24 2.75 9.60 2.8 1.4
54 66 66 0.80 17.29 3.4 1.1
60 74 59 0.85 15.43 3.3 1.1
68 84 52 1.00 13.54 3.2 1.2
71 87 50 0.90 13.10 3.1 1.0
77 94 46 1.10 12.08 3.1 1.2
89 109 40 1.15 10.42 2.9 1.1
CG002-14P-80-06E 14
93 114 38 1.35 9.97 3.0 1.3 160
CF002-14P-80-06E 15
104 128 34 1.50 8.90 2.9 1.3
113 139 31 1.45 8.17 2.8 1.2
135 166 26 1.90 6.88 2.7 1.4
151 186 23 2.15 6.14 2.6 1.4
192 237 18 2.15 4.81 2.4 1.4
261 322 14 2.60 3.54 2.2 1.5
53 65 66 0.80 26.18 3.4 1.1
61 74 58 0.90 23.00 3.3 1.1
68 83 52 1.00 20.53 3.2 1.2
81 99 44 1.15 17.29 3.1 1.3
90 111 39 1.30 15.43 3.0 1.3
103 126 34 1.50 13.54 2.9 1.3
107 131 33 1.30 13.10 2.8 1.2
115 142 31 1.65 12.08 2.8 1.4
CG002-14P-71-04F 10
134 164 26 1.75 10.42 2.6 1.3 160
CF002-14P-71-04F 11
140 172 25 2.00 9.97 2.6 1.4
157 192 23 2.25 8.90 2.6 1.4
171 209 21 2.20 8.17 2.5 1.4
203 249 17 2.85 6.88 2.4 1.5
227 279 16 3.25 6.14 2.3 1.5
290 355 12 3.25 4.81 2.1 1.5
394 483 9 3.95 3.54 1.9 1.5
571 700 6 5.05 2.44 1.7 1.6

46 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.55 kW IE3
50 Hz 60 Hz at 50 Hz

0.55 kW 0.66 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
0.22 0.26 21566 0.85 4369.98 101.6 20.9
0.26 0.31 18072 1.00 3690.13 113.1 24.1
0.27 0.33 17310 1.05 3543.61 115.2 24.8
0.31 0.38 14602 1.25 3020.06 121.7 27.2 CG165-14P-L80-06F 701
194
0.32
0.39
0.39
0.47
14305
11659
1.30
1.55
2966.43
2448.96
122.3
127.2
27.5
29.9
CF165-14P-L80-06F 724
C
0.46 0.56 9585 1.90 2050.07 130.3 31.8
0.57 0.70 7569 2.40 1661.50 132.6 33.6
0.20 0.24 23270 0.80 7067.08 94.6 19.4
0.22 0.27 20785 0.90 6345.03 104.4 21.6
0.27 0.32 17358 1.05 5339.57 115.1 24.7
0.29 0.35 15795 1.15 4884.00 119.0 26.1
0.32 0.39 14025 1.30 4369.98 122.9 27.8
0.38 0.47 11691 1.55 3690.13 127.2 29.9 CG165-14P-80-04E 699
194
0.40 0.49 11169 1.65 3543.61 128.0 30.4 CF165-14P-80-04E 722
0.47 0.57 9372 1.95 3020.06 130.6 32.0
0.48 0.58 9182 2.00 2966.43 130.8 32.2
0.58 0.70 7405 2.45 2448.96 132.8 33.8
0.59 0.72 7251 2.50 2404.16 133.0 33.9
0.69 0.84 6024 3.00 2050.07 134.0 35.0
0.45 0.55 10177 1.80 2093.95 129.5 31.3
0.52 0.64 8657 2.10 1803.51 131.4 32.6
0.57 0.70 7889 2.30 1657.33 132.3 33.3 CG164-14P-L80-06F 688
192
0.61 0.74 7380 2.45 1559.96 132.8 33.8 CF164-14P-L80-06F 711
0.65 0.80 6775 2.70 1447.11 133.4 34.3
0.66 0.81 6683 2.70 1427.45 133.5 34.4
0.68 0.82 6497 2.80 2093.95 133.6 34.6 CG164-14P-80-04E 686
192
CF164-14P-80-04E 709
0.44 0.53 10753 1.25 2162.84 101.7 16.7
0.50 0.61 9318 1.40 1885.79 104.2 18.2
0.57 0.69 8183 1.60 1669.82 105.9 19.3
0.58 0.71 7944 1.65 1624.38 106.2 19.5
0.65 0.79 7061 1.85 1455.92 107.3 20.4
0.67 0.82 6764 1.95 1400.42 107.7 20.7
CG144-14P-L80-06F 437
0.68 0.83 6756 1.95 1398.80 107.7 20.7 188
CF144-14P-L80-06F 455
0.75 0.92 5995 2.20 1254.10 108.5 21.5
0.77 0.95 5825 2.25 1221.03 108.6 21.7
0.86 1.1 5178 2.55 1099.05 109.2 22.3
0.88 1.1 5077 2.60 1079.94 109.3 22.4
0.90 1.1 4934 2.65 1051.77 109.4 22.6
0.99 1.2 4440 2.95 958.27 109.8 23.1
0.66 0.80 6966 1.90 2162.84 107.4 20.5
0.75 0.91 5999 2.20 1885.79 108.5 21.5
CG144-14P-80-04E 435
0.85 1.0 5246 2.50 1669.82 109.2 22.2 188
CF144-14P-80-04E 453
0.87 1.1 5082 2.60 1624.38 109.3 22.4
0.98 1.2 4498 2.90 1455.92 109.8 23.0
0.50 0.61 9561 0.85 1891.77 56.5 18.6
0.58 0.70 8248 1.00 1642.17 61.9 20.1
0.65 0.79 7306 1.10 1460.54 65.0 21.2
0.67 0.81 7083 1.15 1418.83 65.7 21.4
0.75 0.91 6290 1.30 1267.83 67.8 22.3
0.77 0.94 6065 1.35 1224.91 68.4 22.6
CG134-14P-L80-06F 290
0.86 1.1 5390 1.50 1095.41 69.9 23.3 184
CF134-14P-L80-06F 292
0.89 1.1 5221 1.55 1063.29 70.3 23.5
0.98 1.2 4682 1.75 961.31 71.3 24.2
1.0 1.3 4465 1.80 918.68 71.7 24.4
1.1 1.4 4022 2.00 834.47 72.4 24.9
1.3 1.6 3532 2.30 741.90 73.1 25.5
1.5 1.8 3021 2.65 644.01 73.7 26.0

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 47

 PN = 0.55 kW IE3
50 Hz 60 Hz at 50 Hz

0.55 kW 0.66 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
0.75 0.91 6246 1.30 1891.77 68.0 22.4
0.86 1.0 5378 1.50 1642.17 69.9 23.4
0.97 1.2 4743 1.70 1460.54 71.2 24.1
1.0 1.2 4598 1.75 1418.83 71.4 24.2 CG134-14P-80-04E 288
184
C 1.1
1.2
1.4
1.4
4067
3921
2.00
2.05
1267.83
1224.91
72.3
72.5
24.9
25.0
CF134-14P-80-04E 290

1.3 1.6 3463 2.35 1095.41 73.2 25.5

1.5 1.8 2995 2.70 961.31 73.7 26.1
0.85 1.0 5652 0.80 1116.07 28.1 20.0
0.87 1.1 5461 0.85 1080.49 29.6 20.3
1.0 1.3 4588 1.00 913.46 35.1 21.4
1.1 1.4 4160 1.10 831.69 37.1 21.9
1.3 1.6 3488 1.30 703.12 39.8 22.8 CG104-14P-L80-06F 176
180
1.5 1.8 3092 1.50 628.39 41.1 23.3 CF104-14P-L80-06F 180
1.8 2.2 2587 1.75 531.25 42.5 23.9
2.2 2.7 2078 2.20 434.78 43.6 24.6
2.3 2.8 1985 2.30 417.03 43.8 24.7
2.7 3.3 1647 2.75 352.56 44.3 25.1
0.83 1.0 5738 0.80 1702.59 27.4 19.9
0.99 1.2 4821 0.95 1439.39 33.8 21.1
1.1 1.3 4404 1.05 1320.15 36.0 21.6
1.3 1.5 3693 1.25 1116.07 39.1 22.5
1.6 1.9 2985 1.55 913.46 41.4 23.4 CG104-14P-80-04E 174
180
1.7 2.1 2701 1.70 831.69 42.2 23.8 CF104-14P-80-04E 178
2.0 2.4 2255 2.00 703.12 43.2 24.3
2.3 2.7 1991 2.30 628.39 43.8 24.7
2.7 3.2 1652 2.75 531.25 44.3 25.1
2.8 3.3 1592 2.85 514.28 44.4 25.2
1.2 1.5 3961 0.80 782.16 12.6 24.1
1.3 1.6 3616 0.85 715.43 17.4 24.7
1.5 1.8 3222 0.95 640.13 21.2 25.2
1.7 2.1 2698 1.15 540.55 24.9 26.0
1.8 2.2 2586 1.20 519.08 25.5 26.2
1.9 2.3 2524 1.20 506.66 25.8 26.3
2.1 2.6 2186 1.40 442.39 27.5 26.8 CG094-14P-L80-06F 134
176
2.2 2.7 2147 1.40 434.54 27.6 26.8 CF094-14P-L80-06F 132
2.3 2.8 2022 1.50 410.85 28.1 27.0
2.6 3.2 1747 1.75 358.73 29.1 27.4
2.7 3.3 1715 1.75 352.17 29.2 27.5
3.1 3.8 1441 2.10 300.30 30.0 27.9
3.4 4.1 1327 2.30 278.74 30.3 28.0
3.9 4.7 1142 2.65 243.38 30.7 28.3
1.3 1.5 3827 0.80 1135.60 14.7 24.3
1.4 1.7 3475 0.90 1035.22 18.9 24.9
1.5 1.9 3107 1.00 929.45 22.1 25.4
1.7 2.1 2728 1.10 819.36 24.7 26.0
1.8 2.2 2593 1.20 782.16 25.5 26.2
2.0 2.4 2362 1.30 715.43 26.7 26.5
2.2 2.7 2101 1.45 640.13 27.8 26.9
2.3 2.8 2027 1.50 619.07 28.1 27.0 CG094-14P-80-04E 132
176
2.6 3.2 1752 1.75 540.55 29.1 27.4 CF094-14P-80-04E 130
2.7 3.3 1679 1.80 519.08 29.4 27.5
2.8 3.4 1635 1.85 506.66 29.5 27.6
3.2 3.9 1410 2.15 442.39 30.1 27.9
3.3 4.0 1382 2.20 434.54 30.2 28.0
3.5 4.2 1299 2.35 410.85 30.4 28.1
4.0 4.8 1118 2.70 358.73 30.8 28.3
4.1 5.0 1065 2.85 343.93 30.9 28.4
3.1 3.8 1705 1.80 306.73 29.3 27.5
3.9 4.8 1349 2.25 242.77 30.3 28.0 CG093-14P-L80-06F 121
174
4.5 5.4 1178 2.55 211.98 30.7 28.3 CF093-14P-L80-06F 119
5.0 6.2 1041 2.90 187.34 30.9 28.5

Legend see page 29

48 WG20 Gear Units and Geared Motors www.weg.net

PN = 0.55 kW IE3
50 Hz 60 Hz at 50 Hz

0.55 kW 0.66 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
4.6 5.6 1135 2.65 306.73 30.7 28.3 CG093-14P-80-04E 119
174
CF093-14P-80-04E 117
2.6 3.1 2051 0.80 368.94 16.5 18.3
3.3 4.1 1583 1.00 284.84 20.1 19.3
4.0
5.0
4.8
6.2
1328
1042
1.20
1.50
238.89
187.48
21.5
22.7
19.8
20.4
CG083-14P-L80-06F 68
172
C
CF083-14P-L80-06F 72
6.5 8.0 804 1.95 144.69 23.5 20.9
7.9 9.7 665 2.35 119.68 23.8 21.1
9.3 11 566 2.75 101.80 24.0 21.3
3.8 4.7 1365 1.15 368.94 21.3 19.7
5.0 6.0 1054 1.50 284.84 22.7 20.3
CG083-14P-80-04E 66
5.9 7.2 884 1.80 238.89 23.2 20.7 172
CF083-14P-80-04E 70
7.6 9.2 693 2.25 187.48 23.7 21.1
9.8 12 535 2.90 144.69 24.1 21.4
4.8 5.9 1093 0.80 196.68 7.1 12.1
5.3 6.5 986 0.85 177.39 8.8 12.7
5.9 7.2 897 0.95 161.38 9.9 12.7
6.9 8.4 764 1.10 137.38 11.2 13.3
7.6 9.2 695 1.20 124.97 11.7 13.3
9.0 11 581 1.45 104.50 12.5 13.8
9.9 12 528 1.60 95.06 12.8 13.8 CG073-14P-L80-06F 44
170
11 13 479 1.75 86.17 13.0 14.1 CF073-14P-L80-06F 48
12 15 436 1.90 78.39 13.2 14.1
13 16 393 2.10 70.68 13.4 14.3
15 18 357 2.30 64.30 13.5 14.3
16 19 334 2.50 60.06 13.5 14.5
17 21 304 2.75 54.63 13.6 14.5
19 23 274 3.00 49.38 13.7 14.6
5.1 6.2 1030 0.80 278.44 8.2 12.6
5.6 6.8 937 0.90 253.30 9.5 12.5
6.6 8.0 800 1.05 216.20 10.9 13.2
7.2 8.7 727 1.15 196.68 11.5 13.2
8.0 9.7 656 1.25 177.39 12.0 13.6
8.8 11 597 1.40 161.38 12.4 13.6 CG073-14P-80-04E 42
170
10 13 508 1.65 137.38 12.9 14.0 CF073-14P-80-04E 46
11 14 462 1.80 124.97 13.1 14.0
14 16 387 2.15 104.50 13.4 14.3
15 18 352 2.35 95.06 13.5 14.3
16 20 319 2.60 86.17 13.6 14.5
18 22 290 2.85 78.39 13.7 14.5
6.7 8.2 785 0.80 141.17 5.3 5.8
8.0 9.7 659 0.95 118.51 7.5 6.2
8.7 11 604 1.00 108.67 8.2 6.3
11 13 498 1.25 89.54 9.3 6.7
12 14 456 1.35 82.10 9.6 6.8
CG063-14P-L80-06F 28
13 16 407 1.50 73.28 10.0 6.9 168
CF063-14P-L80-06F 33
14 17 373 1.65 67.19 10.2 7.0
16 19 330 1.85 59.42 10.4 7.1
17 21 303 2.00 54.49 10.6 7.2
19 23 276 2.20 49.74 10.7 7.3
21 25 254 2.40 45.61 10.8 7.4
7.5 9.1 696 0.90 188.11 7.0 6.1
8.2 10 638 0.95 172.49 7.8 6.2
9.2 11 569 1.10 153.96 8.6 6.5
10 12 522 1.15 141.17 9.1 6.6
12 15 438 1.40 118.51 9.8 6.8
13 16 402 1.50 108.67 10.0 6.9 CG063-14P-80-04E 26
168
16 19 331 1.85 89.54 10.4 7.1 CF063-14P-80-04E 31
17 21 304 2.00 82.10 10.6 7.2
19 23 271 2.25 73.28 10.7 7.3
21 26 249 2.45 67.19 10.8 7.4
24 29 220 2.75 59.42 10.9 7.5
26 32 202 3.00 54.49 11.0 7.5

www.weg.net WG20 Gear Units and Geared Motors 49

 PN = 0.55 kW IE3
50 Hz 60 Hz at 50 Hz

0.55 kW 0.66 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
16 19 333 1.30 60.00 10.4 7.1
17 21 306 1.30 55.02 10.6 7.2
20 24 264 2.30 47.55 10.7 7.3
22 26 242 2.35 43.60 10.8 7.4

C
CG062-14P-L80-06F 28
26 31 205 2.95 36.92 10.9 7.5 168
CF062-14P-L80-06F 33
28 35 186 1.30 33.43 11.0 7.3
32 39 165 1.30 29.67 11.0 7.4
36 44 147 2.35 26.49 11.1 7.5
40 49 131 2.35 23.52 11.1 7.5
24 29 222 1.90 60.00 10.9 7.5
26 31 204 1.90 55.02 10.9 7.5 CG062-14P-80-04E 25
168
42 51 124 1.90 33.43 11.1 7.6 CF062-14P-80-04E 30
48 58 110 1.90 29.67 11.2 7.6
10 13 513 0.80 92.32 1.4 5.7
12 15 432 0.95 77.79 4.3 6.1
13 16 393 1.05 70.71 5.1 6.3
15 19 343 1.20 61.63 5.8 6.5
CG053-14P-L80-06F 23
17 21 311 1.30 56.02 6.2 6.7 166
CF053-14P-L80-06F 28
19 23 273 1.50 49.20 6.6 6.9
21 26 249 1.65 44.73 6.8 7.0
23 29 224 1.80 40.33 7.0 7.1
26 31 204 2.00 36.67 7.1 7.2
11 13 492 0.85 132.97 2.6 5.9
12 14 447 0.90 120.88 4.0 6.0
14 17 376 1.10 101.55 5.4 6.4
15 19 341 1.20 92.32 5.8 6.5
18 22 288 1.40 77.79 6.4 6.8
20 24 262 1.55 70.71 6.7 6.9 CG053-14P-80-04E 21
166
23 28 228 1.80 61.63 6.9 7.1 CF053-14P-80-04E 26
25 31 207 1.95 56.02 7.1 7.1
29 35 182 2.20 49.20 7.2 7.3
32 38 165 2.45 44.73 7.3 7.3
35 43 149 2.70 40.33 7.4 7.4
39 47 136 2.95 36.67 7.5 7.5
16 20 327 0.80 58.85 6.0 6.6
18 22 297 0.80 53.50 6.3 6.7
20 24 267 1.30 48.13 6.6 6.9
22 26 243 1.30 43.75 6.8 7.0
25 30 211 1.90 38.00 7.1 7.1
26 32 198 0.80 35.67 7.1 7.0
27 33 192 2.10 34.55 7.2 7.2
30 37 172 0.80 31.03 7.3 7.1 CG052-14P-L80-06F 22
166
32 39 164 2.45 29.46 7.3 7.4 CF052-14P-L80-06F 27
35 43 149 2.70 26.79 7.4 7.4
37 46 141 1.30 25.38 7.4 7.3
39 48 134 3.00 24.12 7.5 7.5
41 50 128 2.10 23.03 7.5 7.4
47 58 111 2.10 20.04 7.5 7.4
53 65 99 2.70 17.86 7.6 7.5
61 74 86 2.70 15.54 7.6 7.6
24 29 218 1.15 58.85 7.0 7.1
27 32 198 1.15 53.50 7.1 7.2
30 36 178 1.90 48.13 7.3 7.3
32 39 162 1.90 43.75 7.3 7.4
CG052-14P-80-04E 20
37 45 141 2.85 38.00 7.4 7.5 166
CF052-14P-80-04E 25
40 48 132 1.15 35.67 7.5 7.3
46 55 115 1.20 31.03 7.5 7.4
49 59 108 1.90 29.17 7.6 7.5
56 68 94 1.90 25.38 7.6 7.5
22 26 243 0.85 43.79 4.1 3.1
CG033-14P-L80-06F 19
27 33 197 1.05 35.38 4.8 3.4 164
CF033-14P-L80-06F 21
29 36 179 1.15 32.13 5.0 3.5

Legend see page 29

50 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.55 kW IE3
50 Hz 60 Hz at 50 Hz

0.55 kW 0.66 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
22 27 237 0.85 64.05 4.2 3.1
24 30 215 0.95 58.17 4.5 3.2
26 31 204 1.00 55.25 4.7 3.3
28 34 186 1.10 50.18 4.9 3.4 CG033-14P-80-04E 16
164
29
32
36
39
178
162
1.15
1.25
48.22
43.79
5.0
5.2
3.5
3.6
CF033-14P-80-04E 18
C
40 49 131 1.55 35.38 5.5 3.8
44 54 119 1.70 32.13 5.4 3.8
22 27 238 0.80 42.88 4.2 3.1
24 30 216 0.80 38.95 4.5 3.2
27 33 194 1.05 34.88 4.8 3.4
30 36 176 1.15 31.67 5.0 3.5
34 42 154 1.30 27.71 5.3 3.6
38 46 140 1.45 25.17 5.4 3.7
39 48 134 0.80 24.03 5.4 3.6
44 54 119 1.70 21.40 5.4 3.9
45 55 116 0.80 20.95 5.3 3.7
CG032-14P-L80-06F 18
48 59 109 1.20 19.54 5.2 3.8 164
CF032-14P-L80-06F 20
49 59 108 1.90 19.44 5.3 3.9
55 68 95 2.15 17.09 5.1 4.0
61 74 86 2.35 15.52 5.0 4.1
70 85 75 1.55 13.54 4.7 4.0
73 89 72 2.75 12.92 4.8 4.2
79 96 67 2.00 11.99 4.6 4.1
90 110 58 2.00 10.46 4.4 4.1
99 121 53 2.45 9.57 4.3 4.2
113 138 46 2.50 8.35 4.2 4.2
33 40 159 1.20 42.88 5.2 3.6
36 44 144 1.20 38.95 5.3 3.7
41 49 129 1.60 34.88 5.5 3.8
45 54 117 1.75 31.67 5.4 3.9
51 62 103 2.00 27.71 5.2 4.0
56 68 93 2.15 25.17 5.1 4.0
59 72 89 1.20 24.03 5.0 3.9
CG032-14P-80-04E 16
66 80 79 2.55 21.40 4.9 4.1 164
CF032-14P-80-04E 18
73 88 72 2.80 19.44 4.7 4.1
73 88 72 1.80 19.54 4.7 4.1
83 101 63 1.80 17.04 4.5 4.1
91 111 57 2.30 15.53 4.4 4.2
105 127 50 2.30 13.54 4.2 4.2
118 143 44 2.95 11.99 4.1 4.3
136 165 39 2.95 10.46 3.9 4.3
47 58 111 0.80 19.92 2.6 0.9
53 65 99 0.90 17.85 2.8 1.0
60 73 88 0.80 15.82 3.0 0.8
64 78 83 1.05 14.88 3.1 1.1
71 87 74 1.15 13.33 3.2 1.1
74 90 71 1.20 12.83 3.2 1.2
76 93 69 1.00 12.46 3.2 1.0
82 100 64 1.35 11.50 3.2 1.2
CG012-14P-L80-06F 16
84 103 62 1.35 11.20 3.2 1.2 162
CF012-14P-L80-06F 17
94 115 56 1.50 10.04 3.1 1.3
98 120 53 1.25 9.60 3.0 1.1
115 141 46 1.70 8.22 2.9 1.3
126 154 42 1.60 7.50 2.8 1.3
128 157 41 1.85 7.36 2.8 1.4
169 206 31 2.15 5.60 2.6 1.3
196 239 27 2.50 4.83 2.5 1.4
224 274 23 2.85 4.22 2.4 1.4

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 51

 PN = 0.55 kW IE3
50 Hz 60 Hz at 50 Hz

0.55 kW 0.66 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
48 58 110 0.80 29.65 2.6 0.9
56 67 94 0.95 25.50 2.9 1.0
62 75 85 1.05 22.85 3.1 1.1
71 86 74 1.20 19.92 3.2 1.2

C 73
80
88
96
72
66
0.95
1.30
19.51
17.85
3.2
3.2
1.0
1.2
90 109 59 1.15 15.82 3.0 1.1
95 116 55 1.55 14.88 3.1 1.3
107 129 49 1.75 13.33 3.0 1.3 CG012-14P-80-04E 14
162
111 134 47 1.80 12.83 2.9 1.3 CF012-14P-80-04E 15
114 138 46 1.45 12.46 2.9 1.2
123 150 43 2.00 11.50 2.8 1.3
127 154 41 2.05 11.20 2.8 1.4
141 171 37 2.20 10.04 2.7 1.4
148 179 36 1.90 9.60 2.7 1.3
173 209 30 2.55 8.22 2.6 1.4
189 229 28 2.40 7.50 2.5 1.4
193 234 27 2.75 7.36 2.5 1.4
91 111 58 0.80 10.42 2.7 0.9
95 116 55 0.95 9.97 2.8 1.2
106 130 49 1.05 8.90 2.7 1.2
116 141 45 1.00 8.17 2.6 1.1
CG002-14P-L80-06F 15
137 168 38 1.30 6.88 2.6 1.3 160
CF002-14P-L80-06F 16
154 188 34 1.25 6.14 2.4 1.2
196 240 27 1.50 4.81 2.3 1.3
267 326 20 1.80 3.54 2.1 1.4
387 473 14 2.30 2.44 1.9 1.5
82 100 64 0.80 17.29 2.9 1.1
92 111 57 0.90 15.43 2.8 1.1
105 127 50 1.00 13.54 2.8 1.2
108 131 48 0.90 13.10 2.6 1.0
118 142 45 1.15 12.08 2.7 1.3
136 165 39 1.20 10.42 2.5 1.2
142 173 37 1.40 9.97 2.6 1.3 CG002-14P-80-04E 13
160
160 193 33 1.55 8.90 2.5 1.4 CF002-14P-80-04E 14
174 210 30 1.50 8.17 2.4 1.3
207 250 25 1.95 6.88 2.3 1.4
231 280 23 1.85 6.14 2.2 1.4
295 357 18 2.20 4.81 2.0 1.4
401 486 13 2.70 3.54 1.9 1.5
581 704 9 3.45 2.44 1.7 1.5

Legend see page 29

52 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
0.31 0.38 20380 0.90 3020.06 105.9 22.0
0.32 0.39 20018 0.90 2966.43 107.1 22.3
0.38 0.47 16315 1.15 2448.96 117.8 25.7 CG165-11P-90S/L-06E 707
194
0.39 0.48 16017 1.15 2404.16 118.5 25.9 CF165-11P-90S/L-06E 730
0.46
0.57
0.56
0.69
13518
10760
1.35
1.70
2050.07
1661.50
123.9
128.6
28.2
30.7
C
0.27 0.33 23807 0.80 5339.57 92.2 18.9
0.29 0.36 21720 0.85 4884.00 101.0 20.8
0.33 0.4 19335 0.95 4369.98 109.3 22.9
0.39 0.47 16160 1.15 3690.13 118.1 25.8
0.40 0.49 15479 1.20 3543.61 119.8 26.4
CG165-11P-80-04F 701
0.47 0.58 13057 1.40 3020.06 124.8 28.6 194
CF165-11P-80-04F 724
0.48 0.59 12792 1.45 2966.43 125.3 28.9
0.58 0.71 10398 1.75 2448.96 129.2 31.1
0.59 0.72 10182 1.80 2404.16 129.5 31.2
0.70 0.85 8526 2.15 2050.07 131.6 32.8
0.86 1.0 6715 2.70 1661.50 133.5 34.4
0.45 0.55 14242 1.30 2093.95 122.5 27.6
0.52 0.63 12166 1.50 1803.51 126.4 29.4
0.57 0.69 11111 1.65 1657.33 128.1 30.4
0.60 0.73 10415 1.75 1559.96 129.1 31.0
0.65 0.79 9602 1.90 1447.11 130.3 31.8
0.66 0.80 9452 1.95 1427.45 130.5 31.9 CG164-11P-90S/L-06E 694
192
0.73 0.90 8398 2.15 1278.93 131.7 32.9 CF164-11P-90S/L-06E 717
0.75 0.92 8151 2.25 1246.39 132.0 33.1
0.76 0.93 8074 2.25 1234.69 132.1 33.2
0.85 1.0 7114 2.55 1101.54 133.1 34.0
0.87 1.1 6970 2.60 1081.51 133.2 34.2
0.99 1.2 6039 3.00 952.78 134.0 35.0
0.68 0.83 9095 2.00 2093.95 130.9 32.2
0.79 0.96 7720 2.35 1803.51 132.5 33.5
CG164-11P-80-04F 688
0.86 1.0 7021 2.60 1657.33 133.2 34.1 192
CF164-11P-80-04F 711
0.92 1.1 6567 2.75 1559.96 133.6 34.5
0.99 1.2 6029 3.00 1447.11 134.0 35.0
0.43 0.53 14954 0.90 2162.84 91.8 12.5
0.50 0.61 12959 1.05 1885.79 97.0 14.5
0.56 0.69 11427 1.15 1669.82 100.4 16.0
0.58 0.70 11094 1.20 1624.38 101.1 16.4
0.65 0.79 9882 1.35 1455.92 103.3 17.6
0.67 0.82 9486 1.40 1400.42 103.9 18.0
0.75 0.91 8442 1.55 1254.10 105.5 19.0
CG144-11P-90S/L-06E 443
0.77 0.94 8203 1.60 1221.03 105.9 19.3 188
CF144-11P-90S/L-06E 461
0.86 1.0 7323 1.80 1099.05 107.0 20.2
0.87 1.1 7180 1.85 1079.94 107.2 20.3
0.89 1.1 6979 1.90 1051.77 107.4 20.5
0.98 1.2 6306 2.10 958.27 108.2 21.2
1.0 1.3 5935 2.20 905.71 108.5 21.6
1.1 1.3 5512 2.40 848.21 108.9 22.0
1.3 1.5 4737 2.75 739.56 109.6 22.8
0.66 0.80 9650 1.35 2162.84 103.7 17.8
0.76 0.92 8328 1.60 1885.79 105.7 19.2
0.86 1.0 7313 1.80 1669.82 107.0 20.2
0.88 1.1 7099 1.85 1624.38 107.3 20.4
0.98 1.2 6298 2.10 1455.92 108.2 21.2 CG144-11P-80-04F 437
188
1.0 1.2 6032 2.20 1400.42 108.4 21.5 CF144-11P-80-04F 455
1.1 1.4 5346 2.45 1254.10 109.1 22.1
1.2 1.4 5184 2.55 1221.03 109.2 22.3
1.3 1.6 4608 2.85 1099.05 109.7 22.9
1.4 1.7 4382 3.00 1051.77 109.8 23.1

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 53

 PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
0.64 0.78 10140 0.80 1460.54 53.7 17.9
0.66 0.81 9830 0.85 1418.83 55.2 18.3
0.74 0.9 8748 0.95 1267.83 60.0 19.5
0.77 0.93 8452 0.95 1224.91 61.1 19.8

C 0.86
0.88
1.0
1.1
7512
7292
1.10
1.10
1095.41
1063.29
64.4
65.1
20.9
21.2
0.98 1.2 6552 1.25 961.31 67.2 22.0
CG134-11P-90S/L-06E 296
1.0 1.2 6248 1.30 918.68 67.9 22.4 184
CF134-11P-90S/L-06E 298
1.1 1.4 5641 1.45 834.47 69.4 23.1
1.3 1.5 4974 1.65 741.90 70.8 23.8
1.5 1.8 4273 1.90 644.01 72.0 24.6
1.7 2.1 3646 2.20 556.43 72.9 25.3
1.8 2.1 3469 2.35 532.69 73.2 25.5
2.0 2.5 2948 2.75 460.25 73.8 26.1
2.1 2.5 2896 2.80 453.11 73.8 26.2
0.76 0.92 8580 0.95 1891.77 60.6 19.7
0.87 1.1 7403 1.10 1642.17 64.7 21.0
0.98 1.2 6543 1.25 1460.54 67.2 22.0
1.0 1.2 6343 1.30 1418.83 67.7 22.3
1.1 1.4 5633 1.45 1267.83 69.4 23.1
1.2 1.4 5431 1.50 1224.91 69.8 23.3
CG134-11P-80-04F 290
1.3 1.6 4817 1.70 1095.41 71.0 24.0 184
CF134-11P-80-04F 292
1.5 1.8 4184 1.95 961.31 72.1 24.7
1.6 1.9 3982 2.05 918.68 72.4 25.0
1.7 2.1 3587 2.25 834.47 73.0 25.4
1.9 2.3 3150 2.55 741.90 73.6 25.9
2.0 2.4 3048 2.65 720.98 73.7 26.0
2.2 2.7 2683 3.00 644.01 74.1 26.4
1.1 1.4 5774 0.80 831.69 27.1 19.9
1.3 1.6 4852 0.95 703.12 33.6 21.0
1.5 1.8 4318 1.05 628.39 36.4 21.7
1.8 2.2 3621 1.25 531.25 39.3 22.6
2.2 2.6 2927 1.55 434.78 41.6 23.5 CG104-11P-90S/L-06E 182
180
2.3 2.7 2796 1.65 417.03 42.0 23.6 CF104-11P-90S/L-06E 186
2.7 3.2 2334 1.95 352.56 43.1 24.2
3.2 3.9 1922 2.35 295.14 43.9 24.8
3.3 4.0 1831 2.50 282.94 44.0 24.9
3.9 4.8 1516 3.00 239.20 44.5 25.3
1.3 1.6 5072 0.90 1116.07 32.3 20.7
1.6 1.9 4118 1.10 913.46 37.3 22.0
1.7 2.1 3726 1.25 831.69 38.9 22.5
2.0 2.5 3124 1.45 703.12 41.0 23.2
CG104-11P-80-04F 176
2.3 2.8 2769 1.65 628.39 42.0 23.7 180
CF104-11P-80-04F 180
2.7 3.3 2312 1.95 531.25 43.1 24.3
2.8 3.4 2229 2.05 514.28 43.3 24.4
3.3 4.0 1853 2.45 434.78 44.0 24.8
3.4 4.2 1770 2.55 417.03 44.1 24.9
3.8 4.6 1878 2.40 246.43 44.0 24.8 CG104-11P-90S/L-06E 169
180
4.5 5.5 1587 2.85 208.33 44.4 25.2 CF104-11P-90S/L-06E 173
1.7 2.1 3753 0.80 540.55 15.7 24.5
1.8 2.2 3596 0.85 519.08 17.6 24.7
1.9 2.3 3503 0.90 506.66 18.6 24.8
2.1 2.6 3046 1.00 442.39 22.6 25.5
2.2 2.6 2986 1.05 434.54 23.0 25.6
CG094-11P-90S/L-06E 139
2.3 2.8 2817 1.10 410.85 24.1 25.8 176
CF094-11P-90S/L-06E 137
2.6 3.2 2445 1.25 358.73 26.2 26.4
2.7 3.3 2400 1.25 352.17 26.5 26.5
3.1 3.8 2026 1.50 300.30 28.1 27.0
3.4 4.1 1869 1.65 278.74 28.7 27.2
3.9 4.7 1615 1.90 243.38 29.5 27.6

Legend see page 29

54 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
1.7 2.1 3732 0.85 819.36 16.0 24.5
1.8 2.2 3562 0.85 782.16 18.0 24.7
2.0 2.4 3245 0.95 715.43 21.0 25.2
2.2 2.7 2892 1.05 640.13 23.6 25.7
2.3
2.6
2.8
3.2
2791
2422
1.10
1.25
619.07
540.55
24.3
26.4
25.9
26.4
C
2.8 3.4 2321 1.30 519.08 26.9 26.6
3.2 3.9 1958 1.55 442.39 28.4 27.1 CG094-11P-80-04F 133
176
3.3 4.0 1919 1.60 434.54 28.5 27.2 CF094-11P-80-04F 131
3.5 4.2 1807 1.70 410.85 28.9 27.3
4.0 4.9 1561 1.95 358.73 29.7 27.7
4.1 4.9 1530 2.00 352.17 29.8 27.7
4.2 5.1 1491 2.05 343.93 29.9 27.8
4.8 5.8 1286 2.35 300.30 30.4 28.1
5.1 6.2 1183 2.55 278.74 30.6 28.3
5.9 7.1 1014 3.00 243.38 31.0 28.5
3.1 3.7 2337 1.30 306.73 26.8 26.5
3.9 4.7 1850 1.65 242.77 28.8 27.3
4.4 5.4 1615 1.90 211.98 29.5 27.6
CG093-11P-90S/L-06E 126
5.0 6.1 1427 2.15 187.34 30.1 27.9 174
CF093-11P-90S/L-06E 124
5.9 7.2 1207 2.50 158.42 30.6 28.2
6.1 7.4 1175 2.60 154.24 30.7 28.3
6.9 8.4 1038 2.90 136.18 30.9 28.5
4.7 5.7 1536 2.00 306.73 29.8 27.7
CG093-11P-80-04F 120
5.9 7.2 1216 2.50 242.77 30.6 28.2 174
CF093-11P-80-04F 118
6.7 8.2 1062 2.85 211.98 30.9 28.4
3.9 4.8 1820 0.90 238.89 18.5 18.8
5.0 6.1 1429 1.10 187.48 21.0 19.6
6.5 7.9 1102 1.45 144.69 22.5 20.2
CG083-11P-90S/L-06E 74
7.9 9.6 912 1.70 119.68 23.2 20.6 172
CF083-11P-90S/L-06E 78
9.2 11 776 2.00 101.80 23.5 20.9
11 13 672 2.35 88.23 23.8 21.1
13 15 568 2.75 74.50 24.0 21.3
3.9 4.7 1848 0.85 368.94 18.2 18.7
5.0 6.1 1427 1.10 284.84 21.0 19.6
6.0 7.3 1197 1.30 238.89 22.1 20.1 CG083-11P-80-04F 68
172
7.6 9.3 939 1.70 187.48 23.1 20.6 CF083-11P-80-04F 72
9.9 12 725 2.15 144.69 23.7 21.0
12 15 599 2.60 119.68 23.9 21.3
6.8 8.3 1047 0.80 137.38 7.9 12.5
7.5 9.2 952 0.90 124.97 9.3 12.5
9.0 11 796 1.05 104.50 10.9 13.2
9.9 12 724 1.15 95.06 11.5 13.2
11 13 657 1.25 86.17 12.0 13.6
12 15 597 1.40 78.39 12.4 13.6
13 16 539 1.55 70.68 12.7 13.9 CG073-11P-90S/L-06E 50
170
15 18 490 1.70 64.30 12.9 13.9 CF073-11P-90S/L-06E 54
16 19 458 1.80 60.06 13.1 14.1
17 21 416 2.00 54.63 13.3 14.1
19 23 376 2.20 49.38 13.4 14.4
21 25 342 2.35 44.92 13.5 14.4
24 29 298 2.60 39.17 13.6 14.6
26 32 271 2.70 35.63 13.7 14.6

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 55

 PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
6.6 8.0 1083 0.80 216.20 7.3 12.4
7.3 8.8 985 0.85 196.68 8.8 12.4
8.1 9.8 889 0.95 177.39 10.0 12.9
8.9 11 808 1.05 161.38 10.8 12.9

C 10
11
13
14
688
626
1.20
1.35
137.38
124.97
11.8
12.2
13.5
13.5
14 17 523 1.60 104.50 12.8 14.0 CG073-11P-80-04F 44
170
15 18 476 1.75 95.06 13.0 13.9 CF073-11P-80-04F 48
17 20 432 1.90 86.17 13.2 14.2
18 22 393 2.10 78.39 13.4 14.2
20 25 354 2.35 70.68 13.5 14.4
22 27 322 2.55 64.30 13.6 14.4
24 29 301 2.75 60.06 13.6 14.6
26 32 274 3.00 54.63 13.7 14.6
24 29 297 2.80 38.92 13.7 14.6 CG072-11P-90S/L-06E 49
170
CF072-11P-90S/L-06E 53
10 13 682 0.90 89.54 7.2 6.1
11 14 626 1.00 82.10 8.0 6.3
13 16 558 1.10 73.28 8.7 6.5
14 17 512 1.20 67.19 9.2 6.6 CG063-11P-90S/L-06E 33
168
16 19 453 1.35 59.42 9.7 6.8 CF063-11P-90S/L-06E 38
17 21 415 1.45 54.49 9.9 6.9
19 23 379 1.60 49.74 10.2 7.0
21 25 348 1.75 45.61 10.3 7.1
9.3 11 771 0.80 153.96 5.6 5.9
10 12 707 0.85 141.17 6.8 6.0
12 15 594 1.05 118.51 8.4 6.4
13 16 544 1.15 108.67 8.9 6.5
16 19 448 1.35 89.54 9.7 6.8
17 21 411 1.50 82.10 10.0 6.9 CG063-11P-80-04F 27
168
20 24 367 1.65 73.28 10.2 7.0 CF063-11P-80-04F 32
21 26 337 1.80 67.19 10.4 7.1
24 29 298 2.05 59.42 10.6 7.2
26 32 273 2.20 54.49 10.7 7.3
29 35 249 2.45 49.74 10.8 7.4
31 38 228 2.65 45.61 10.9 7.4
16 19 457 0.95 60.00 9.6 6.8
17 21 419 0.95 55.02 9.9 6.9
20 24 362 1.70 47.55 10.3 7.1
22 26 332 1.70 43.60 10.4 7.1
25 31 281 2.15 36.92 10.7 7.3
28 34 258 2.35 33.86 10.8 7.3
31 38 231 2.60 30.30 10.9 7.4 CG062-11P-90S/L-06E 33
168
34 41 212 2.85 27.78 10.9 7.5 CF062-11P-90S/L-06E 38
35 43 202 1.70 26.49 11.0 7.3
40 49 179 1.70 23.52 11.0 7.3
46 56 157 2.45 20.57 11.1 7.4
51 63 139 2.45 18.26 11.0 7.5
56 68 129 2.95 16.88 10.7 7.6
63 76 114 2.95 14.98 10.3 7.6
24 29 301 1.40 60.00 10.6 7.2
26 32 276 1.40 55.02 10.7 7.3
30 37 238 2.55 47.55 10.8 7.4
33 40 218 2.60 43.60 10.9 7.5 CG063-11P-80-04F 27
168
43 52 167 1.40 33.43 11.0 7.4 CF063-11P-80-04F 32
48 59 149 1.40 29.67 11.1 7.5
54 66 133 2.60 26.49 10.8 7.5
61 74 118 2.60 23.52 10.4 7.6

Legend see page 29

56 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
15 19 470 0.90 61.63 3.4 6.0
17 20 427 0.95 56.02 4.4 6.1
19 23 375 1.10 49.20 5.4 6.4 CG053-11P-90S/L-06E 29
166
21 26 341 1.20 44.73 5.8 6.5 CF053-11P-90S/L-06E 34
23
26
28
31
307
279
1.35
1.45
40.33
36.67
6.2
6.5
6.7
6.8
C
14 17 509 0.80 101.55 1.7 5.8
15 19 462 0.90 92.32 3.6 6.0
18 22 390 1.05 77.79 5.1 6.3
20 25 354 1.15 70.71 5.7 6.5
23 28 309 1.30 61.63 6.2 6.7 CG053-11P-80-04F 23
166
26 31 281 1.45 56.02 6.5 6.8 CF053-11P-80-04F 28
29 35 246 1.65 49.20 6.8 7.0
32 39 224 1.80 44.73 7.0 7.1
35 43 202 2.00 40.33 7.1 7.2
39 47 184 2.20 36.67 7.2 7.3
20 24 367 0.95 48.13 5.5 6.4
21 26 333 0.95 43.75 5.9 6.6
25 30 290 1.40 38.00 6.4 6.8
27 33 263 1.55 34.55 6.7 6.9
32 39 225 1.80 29.46 7.0 7.1
35 43 204 2.00 26.79 7.1 7.2
37 45 193 0.95 25.38 7.2 7.0
39 47 184 2.20 24.12 7.2 7.3 CG052-11P-90S/L-06E 28
166
41 50 175 1.55 23.03 7.3 7.1 CF052-11P-90S/L-06E 33
43 52 167 2.40 21.92 7.3 7.3
47 57 153 1.55 20.04 7.4 7.2
51 62 141 2.85 18.56 7.4 7.5
53 64 136 2.00 17.86 7.5 7.3
61 74 118 2.00 15.54 7.5 7.4
64 78 111 2.40 14.62 7.5 7.5
74 90 97 2.40 12.72 7.6 7.5
24 30 295 0.85 58.85 6.4 6.8
27 33 268 0.85 53.50 6.6 6.9
30 36 241 1.40 48.13 6.8 7.0
33 40 219 1.45 43.75 7.0 7.1
38 46 190 2.15 38.00 7.2 7.2
40 49 179 0.85 35.67 7.3 7.1
41 50 173 2.35 34.55 7.3 7.3
CG052-11P-80-04F 22
46 56 155 0.85 31.03 7.4 7.2 166
CF052-11P-80-04F 27
49 60 146 1.40 29.17 7.4 7.3
53 65 134 3.00 26.79 7.5 7.5
56 69 127 1.45 25.38 7.5 7.3
62 76 115 2.35 23.03 7.5 7.4
71 87 100 2.35 20.04 7.6 7.5
80 97 89 3.00 17.86 7.5 7.6
92 112 78 3.00 15.54 7.2 7.6
28 35 251 0.80 50.18 3.9 3.0
30 36 242 0.85 48.22 4.1 3.1
CG033-11P-80-04F 18
33 40 219 0.95 43.79 4.5 3.2 164
CF033-11P-80-04F 20
40 49 177 1.15 35.38 5.0 3.5
45 54 161 1.25 32.13 5.1 3.6

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 57

 PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
27 33 266 0.80 34.88 3.6 2.9
30 36 241 0.85 31.67 4.1 3.1
34 41 211 0.95 27.71 4.6 3.3
37 45 192 1.05 25.17 4.9 3.4

C 44
48
53
59
163
149
1.25
0.90
21.40
19.54
5.2
5.0
3.6
3.5
55 67 130 1.55 17.09 4.9 3.8
61 74 118 1.70 15.52 4.8 3.8
69 85 103 1.15 13.54 4.6 3.8
73 89 98 2.00 12.92 4.6 4.0 CG032-11P-90S/L-06E 24
164
78 95 91 1.45 11.99 4.5 3.9 CF032-11P-90S/L-06E 26
80 98 89 2.25 11.73 4.5 4.0
90 110 80 1.45 10.46 4.3 4.0
96 117 75 2.45 9.82 4.3 4.1
98 120 73 1.80 9.57 4.2 4.1
105 128 68 2.70 8.92 4.2 4.2
113 137 64 1.80 8.35 4.0 4.1
123 150 58 2.95 7.64 4.0 4.2
130 158 55 2.40 7.24 3.9 4.2
149 181 48 2.40 6.31 3.7 4.2
33 41 215 0.90 42.88 4.5 3.3
37 45 195 0.90 38.95 4.8 3.4
41 50 175 1.15 34.88 5.1 3.5
45 55 159 1.30 31.67 5.1 3.6
52 63 139 1.45 27.71 5.0 3.7
57 69 126 1.60 25.17 4.9 3.8
60 72 120 0.90 24.03 4.7 3.7
67 81 107 1.90 21.40 4.7 3.9
68 83 105 0.90 20.95 4.6 3.8
CG032-11P-80-04F 18
73 89 98 1.35 19.54 4.5 3.9 164
CF032-11P-80-04F 20
74 90 97 2.10 19.44 4.6 4.0
84 102 86 2.35 17.09 4.4 4.1
92 112 78 2.60 15.52 4.3 4.1
106 129 68 1.70 13.54 4.1 4.1
111 135 65 3.00 12.92 4.1 4.2
119 145 60 2.20 11.99 4.0 4.1
137 166 52 2.20 10.46 3.8 4.2
149 182 48 2.75 9.57 3.8 4.2
171 208 42 2.75 8.35 3.6 4.3
71 86 102 0.85 13.33 2.8 1.0
73 89 98 0.90 12.83 2.9 1.0
82 100 88 1.00 11.50 3.0 1.1
84 102 85 1.00 11.20 3.0 1.1
94 114 76 1.10 10.04 2.9 1.1
98 119 73 0.95 9.60 2.8 1.0
CG012-11P-90S/L-06E 22
114 139 63 1.25 8.22 2.8 1.2 162
CF012-11P-90S/L-06E 23
125 153 57 1.20 7.50 2.7 1.1
128 155 56 1.35 7.36 2.7 1.3
168 204 43 1.55 5.60 2.5 1.2
194 237 37 1.80 4.83 2.4 1.3
223 271 32 2.10 4.22 2.3 1.3
304 370 24 2.70 3.09 2.1 1.4

Legend see page 29

58 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
72 87 100 0.90 19.92 2.8 1.0
80 97 89 1.00 17.85 3.0 1.0
90 110 79 0.85 15.82 2.9 0.9
96 117 75 1.15 14.88 2.9 1.1
107
111
131
136
67
64
1.30
1.35
13.33
12.83
2.9
2.8
1.2
1.2
C
115 140 62 1.10 12.46 2.7 1.1
124 151 58 1.50 11.50 2.8 1.2 CG012-11P-80-04F 15
162
128 155 56 1.50 11.20 2.7 1.3 CF012-11P-80-04F 16
142 173 50 1.65 10.04 2.7 1.3
149 181 48 1.40 9.60 2.6 1.2
174 212 41 1.85 8.22 2.5 1.4
191 232 38 1.80 7.50 2.4 1.3
194 236 37 2.05 7.36 2.4 1.4
255 311 28 2.40 5.60 2.2 1.4
296 360 24 2.75 4.83 2.1 1.4
118 144 61 0.85 12.08 2.6 1.1
137 167 52 0.90 10.42 2.4 1.0
143 175 50 1.05 9.97 2.5 1.2
161 196 45 1.15 8.90 2.4 1.3
175 213 41 1.10 8.17 2.3 1.1 CG002-11P-80-04F 14
160
208 253 34 1.45 6.88 2.2 1.3 CF002-11P-80-04F 15
233 283 31 1.40 6.14 2.1 1.3
297 362 24 1.65 4.81 2.0 1.3
404 491 18 2.00 3.54 1.8 1.4
585 712 12 2.55 2.44 1.6 1.5

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 59

 PN = 1.1 kW IE3
50 Hz 60 Hz at 50 Hz

1.1 kW 1.3 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
0.39 0.48 23716 0.80 3690.13 92.6 19.0
0.41 0.50 22775 0.80 3543.61 96.8 19.8
0.48 0.58 19261 0.95 3020.06 109.5 23.0
0.49 0.59 18871 1.00 2966.43 110.7 23.4 CG165-11P-90S/L-04E 705
194
C 0.59
0.61
0.72
0.73
15420
15138
1.20
1.20
2448.96
2404.16
119.9
120.5
26.5
26.7
CF165-11P-90S/L-04E 728

0.71 0.86 12743 1.45 2050.07 125.4 28.9

0.88 1.1 10143 1.80 1661.50 129.5 31.3
0.39 0.48 23855 0.80 2448.96 92.0 18.8
0.40 0.48 23419 0.80 2404.16 94.0 19.2 CG165-11P-100L-06D 711
194
0.47 0.57 19817 0.95 2050.07 107.8 22.5 CF165-11P-100L-06D 734
0.58 0.70 15897 1.15 1661.50 118.8 26.1
0.69 0.84 13467 1.35 2093.95 124.0 28.3
0.81 0.98 11480 1.60 1803.51 127.5 30.1
0.88 1.1 10484 1.75 1657.33 129.0 31.0
0.93 1.1 9828 1.85 1559.96 130.0 31.6 CG164-11P-90S/L-04E 692
192
1.0 1.2 9060 2.00 1447.11 131.0 32.3 CF164-11P-90S/L-04E 715
1.1 1.4 7908 2.30 1278.93 132.3 33.3
1.2 1.4 7691 2.35 1246.39 132.5 33.5
1.3 1.6 6699 2.70 1101.54 133.5 34.4
0.46 0.56 20792 0.90 2093.95 104.4 21.6
0.53 0.65 17798 1.05 1803.51 113.9 24.3
0.58 0.70 16288 1.15 1657.33 117.8 25.7
0.62 0.75 15300 1.20 1559.96 120.2 26.6
0.66 0.81 14135 1.30 1447.11 122.7 27.7
0.67 0.82 13943 1.30 1427.45 123.1 27.8
0.75 0.91 12415 1.45 1278.93 126.0 29.2 CG164-11P-100L-06D 698
192
0.77 0.93 12074 1.50 1246.39 126.5 29.5 CF164-11P-100L-06D 721
0.78 0.94 11936 1.55 1234.69 126.8 29.7
0.87 1.1 10562 1.75 1101.54 128.9 30.9
0.89 1.1 10370 1.75 1081.51 129.2 31.1
1.0 1.2 9041 2.00 952.78 131.0 32.3
1.2 1.4 7574 2.40 811.56 132.6 33.6
1.4 1.7 6402 2.85 698.99 133.7 34.7
0.67 0.81 14141 0.95 2162.84 94.0 13.3
0.77 0.93 12254 1.10 1885.79 98.6 15.2
0.87 1.1 10784 1.25 1669.82 101.6 16.7
0.90 1.1 10490 1.25 1624.38 102.2 17.0
1.0 1.2 9344 1.40 1455.92 104.2 18.1
1.2 1.4 7966 1.65 1254.10 106.2 19.5
CG144-11P-90S/L-04E 441
1.3 1.6 6910 1.90 1099.05 107.5 20.6 188
CF144-11P-90S/L-04E 459
1.4 1.7 6585 2.00 1051.77 107.9 20.9
1.5 1.8 5950 2.20 958.27 108.5 21.5
1.6 1.9 5589 2.35 905.71 108.9 21.9
1.7 2.1 5201 2.50 848.21 109.2 22.3
1.8 2.1 5041 2.60 825.43 109.3 22.4
2.0 2.4 4451 2.95 739.56 109.8 23.0

Legend see page 29

60 WG20 Gear Units and Geared Motors www.weg.net

 PN = 1.1 kW IE3
50 Hz 60 Hz at 50 Hz

1.1 kW 1.3 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
0.57 0.70 16648 0.80 1669.82 86.4 10.8
0.59 0.72 16162 0.85 1624.38 88.0 11.3
0.66 0.80 14456 0.90 1455.92 93.2 13.0
0.69 0.83 13877 0.95 1400.42 94.7 13.6
0.77
0.79
0.93
0.95
12351
12025
1.10
1.10
1254.10
1221.03
98.4
99.1
15.1
15.4
C
0.87 1.1 10757 1.25 1099.05 101.7 16.7
0.89 1.1 10570 1.25 1079.94 102.0 16.9
0.91 1.1 10273 1.30 1051.77 102.6 17.2
CG144-11P-100L-06D 447
1.0 1.2 9322 1.40 958.27 104.2 18.2 188
CF144-11P-100L-06D 465
1.1 1.3 8774 1.50 905.71 105.0 18.7
1.2 1.4 7947 1.65 825.43 106.2 19.5
1.3 1.6 7062 1.85 739.56 107.3 20.4
1.4 1.6 6759 1.95 710.80 107.7 20.7
1.5 1.8 5995 2.20 637.04 108.5 21.5
1.6 1.9 5733 2.30 611.72 108.7 21.8
1.7 2.1 5077 2.60 548.57 109.3 22.4
1.8 2.2 4857 2.70 526.92 109.5 22.6
1.9 2.3 4757 2.75 517.20 109.6 22.7
1.0 1.2 9588 0.85 1460.54 56.4 18.5
1.1 1.4 8272 1.00 1267.83 61.8 20.1
1.2 1.4 7976 1.05 1224.91 62.8 20.4
1.3 1.6 7103 1.15 1095.41 65.6 21.4
1.4 1.7 6881 1.20 1063.29 66.3 21.6
1.5 1.8 6195 1.30 961.31 68.1 22.4
1.6 1.9 5896 1.40 918.68 68.8 22.8
CG134-11P-90S/L-04E 294
1.7 2.1 5334 1.50 834.47 70.0 23.4 184
CF134-11P-90S/L-04E 296
2.0 2.4 4693 1.75 741.90 71.3 24.1
2.3 2.7 4032 2.00 644.01 72.4 24.9
2.4 2.9 3826 2.10 613.66 72.7 25.1
2.6 3.2 3434 2.35 556.43 73.2 25.6
2.7 3.3 3273 2.45 532.69 73.4 25.8
2.8 3.4 3201 2.50 521.98 73.5 25.8
3.2 3.8 2776 2.90 460.25 74.0 26.3
0.90 1.1 10601 0.80 1063.29 51.2 17.4
1.0 1.2 9565 0.85 961.31 56.5 18.6
1.2 1.4 8252 1.00 834.47 61.9 20.1
1.3 1.6 7306 1.10 741.90 65.0 21.2
1.5 1.8 6291 1.30 644.01 67.8 22.3
1.6 1.9 5982 1.35 613.66 68.6 22.7
1.7 2.1 5390 1.50 556.43 69.9 23.3 CG134-11P-100L-06D 300
184
1.8 2.2 5139 1.60 532.69 70.4 23.6 CF134-11P-100L-06D 302
2.1 2.5 4395 1.85 460.25 71.8 24.5
2.4 3.0 3696 2.20 392.69 72.9 25.3
2.5 3.0 3684 2.20 391.48 72.9 25.3
2.8 3.4 3147 2.55 339.29 73.6 25.9
2.9 3.5 3063 2.65 331.61 73.7 26.0
3.1 3.7 2888 2.80 314.70 73.8 26.2
1.7 2.1 5460 0.85 831.69 29.6 20.3
2.1 2.5 4588 1.00 703.12 35.1 21.4
2.3 2.8 4075 1.15 628.39 37.5 22.0
2.7 3.3 3417 1.35 531.25 40.1 22.9
2.8 3.4 3301 1.40 514.28 40.5 23.0
CG104-11P-90S/L-04E 180
3.3 4.0 2762 1.65 434.78 42.0 23.7 180
CF104-11P-90S/L-04E 184
3.5 4.2 2638 1.75 417.03 42.4 23.8
4.1 5.0 2203 2.05 352.56 43.4 24.4
4.2 5.0 2177 2.10 349.11 43.4 24.4
4.9 6.0 1810 2.50 295.14 44.1 24.9
5.1 6.2 1724 2.65 282.94 44.2 25.0

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 61

 PN = 1.1 kW IE3
50 Hz 60 Hz at 50 Hz

1.1 kW 1.3 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
1.8 2.2 5275 0.90 531.25 30.9 20.5
1.9 2.3 5107 0.90 514.28 32.1 20.7
2.2 2.7 4291 1.05 434.78 36.5 21.7
2.3 2.8 4107 1.10 417.03 37.4 22.0 CG104-11P-100L-06D 186
180
C 2.7
3.3
3.3
3.9
3437
2847
1.35
1.60
352.56
295.14
40.0
41.8
22.8
23.6
CF104-11P-100L-06D 190

3.4 4.1 2718 1.70 282.94 42.2 23.7

4.0 4.9 2270 2.00 239.20 43.2 24.3
5.9 7.1 1779 2.55 246.43 44.1 24.9 CG103-11P-90S/L-04E 167
178
7.0 8.4 1504 3.00 208.33 44.5 25.3 CF103-11P-90S/L-04E 171
3.9 4.7 2697 1.70 246.43 42.2 23.8
4.6 5.6 2280 2.00 208.33 43.2 24.3
CG103-11P-100L-06D 173
5.3 6.5 1973 2.30 180.35 43.8 24.7 178
CF103-11P-100L-06D 177
6.0 7.3 1748 2.60 159.72 44.2 25.0
6.9 8.4 1512 3.00 138.17 44.5 25.3
2.7 3.3 3549 0.85 540.55 18.1 24.8
2.8 3.4 3401 0.90 519.08 19.6 25.0
2.9 3.5 3313 0.95 506.66 20.4 25.1
3.3 4.0 2880 1.05 442.39 23.7 25.7
3.5 4.3 2664 1.15 410.85 25.1 26.1 CG094-11P-90S/L-04E 137
176
4.1 4.9 2312 1.30 358.73 26.9 26.6 CF094-11P-90S/L-04E 135
4.2 5.1 2207 1.40 343.93 27.4 26.7
4.8 5.9 1912 1.60 300.30 28.6 27.2
5.2 6.3 1767 1.70 278.74 29.1 27.4
6.0 7.2 1524 2.00 243.38 29.8 27.7
2.7 3.2 3569 0.85 358.73 17.9 24.7
2.8 3.4 3415 0.90 343.93 19.5 25.0
CG094-11P-100L-06D 143
3.2 3.9 2964 1.05 300.30 23.1 25.6 174
CF094-11P-100L-06D 141
3.4 4.2 2745 1.10 278.74 24.6 25.9
3.9 4.8 2377 1.30 243.38 26.6 26.5
4.7 5.7 2215 1.40 306.73 27.3 26.7
6.0 7.2 1753 1.75 242.77 29.1 27.4
6.9 8.3 1530 2.00 211.98 29.8 27.7 CG093-11P-90S/L-04E 124
174
7.8 9.4 1353 2.25 187.34 30.3 28.0 CF093-11P-90S/L-04E 122
9.2 11 1144 2.65 158.42 30.7 28.3
9.4 11 1114 2.70 154.24 30.8 28.4
3.1 3.8 3356 0.90 306.73 20.0 25.0
4.0 4.8 2657 1.15 242.77 25.1 26.1
4.5 5.5 2320 1.30 211.98 26.9 26.6
5.1 6.2 2050 1.50 187.34 28.0 27.0
6.1 7.4 1734 1.75 158.42 29.2 27.4
6.2 7.6 1688 1.80 154.24 29.3 27.5 CG093-11P-100L-06D 130
174
7.0 8.6 1490 2.05 136.18 29.9 27.8 CF093-11P-100L-06D 128
7.9 9.5 1336 2.25 122.08 30.3 28.0
8.1 9.8 1301 2.35 118.88 30.4 28.1
9.0 11 1166 2.60 106.60 30.7 28.3
9.4 11 1115 2.70 101.85 30.8 28.4
10 12 1031 2.95 94.21 30.9 28.5
5.1 6.2 2057 0.80 284.84 16.4 18.3
6.1 7.4 1725 0.90 238.89 19.2 19.0
7.8 9.4 1354 1.15 187.48 21.4 19.7
10 12 1045 1.50 144.69 22.7 20.4 CG083-11P-90S/L-04E 72
172
12 15 864 1.80 119.68 23.3 20.7 CF083-11P-90S/L-04E 76
14 17 735 2.15 101.80 23.6 21.0
16 20 637 2.45 88.23 23.9 21.2
20 24 538 2.90 74.50 24.1 21.4
5.1 6.2 2052 0.80 187.48 16.4 18.3
6.6 8.1 1583 1.00 144.69 20.1 19.3
8.0 9.7 1310 1.20 119.68 21.6 19.8
CG083-11P-100L-06D 78
9.4 11 1114 1.40 101.80 22.4 20.2 172
CF083-11P-100L-06D 82
11 13 965 1.65 88.23 23.0 20.5
13 16 815 1.95 74.50 23.4 20.8
16 19 672 2.35 61.37 23.8 21.1

62 WG20 Gear Units and Geared Motors www.weg.net

 PN = 1.1 kW IE3
50 Hz 60 Hz at 50 Hz

1.1 kW 1.3 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
18 22 593 2.65 54.18 24.0 21.3 CG082-11P-100L-06D 77
172
CF082-11P-100L-06D 81
11 13 992 0.85 137.38 8.7 12.7
12 14 902 0.95 124.97 9.9 12.6
14
15
17
19
754
686
1.10
1.20
104.50
95.06
11.3
11.8
13.3
13.3
C
17 20 622 1.35 86.17 12.2 13.7
19 22 566 1.45 78.39 12.6 13.7
21 25 510 1.65 70.68 12.9 14.0 CG073-11P-90S/L-04E 48
170
23 27 464 1.80 64.30 13.1 14.0 CF073-11P-90S/L-04E 52
24 29 434 1.90 60.06 13.2 14.2
27 32 394 2.10 54.63 13.3 14.2
29 36 357 2.35 49.38 13.5 14.4
32 39 324 2.45 44.92 13.6 14.4
37 45 283 2.75 39.17 13.7 14.6
41 49 257 2.85 35.63 13.7 14.6
10 12 1040 0.80 95.06 8.0 12.2
11 14 943 0.90 86.17 9.4 12.8
12 15 858 1.00 78.39 10.3 12.8
14 16 773 1.10 70.68 11.1 13.3
15 18 704 1.20 64.30 11.7 13.2
CG073-11P-100L-06D 54
16 19 657 1.25 60.06 12.0 13.6 170
CF073-11P-100L-06D 58
18 21 598 1.40 54.63 12.4 13.6
19 24 540 1.55 49.38 12.7 13.9
21 26 492 1.65 44.92 12.9 13.9
25 30 429 1.80 39.17 13.2 14.2
27 33 390 1.90 35.63 13.4 14.2
37 45 281 2.95 38.92 13.7 14.6 CG072-11P-90S/L-04E 47
170
CF072-11P-90S/L-04E 51
25 30 426 1.95 38.92 13.2 14.2
27 33 387 2.15 35.41 13.4 14.2 CG072-11P-100L-06D 53
170
31 38 334 2.50 30.55 13.5 14.5 CF072-11P-100L-06D 57
35 42 304 2.70 27.79 13.6 14.5
13 16 785 0.80 108.67 5.3 5.8
16 20 646 0.95 89.54 7.7 6.2
18 21 593 1.05 82.10 8.4 6.4
20 24 529 1.15 73.28 9.0 6.6
CG063-11P-90S/L-04E 31
22 26 485 1.25 67.19 9.4 6.7 168
CF063-11P-90S/L-04E 36
24 30 429 1.40 59.42 9.8 6.9
27 32 393 1.55 54.49 10.1 6.9
29 35 359 1.70 49.74 10.3 7.1
32 39 329 1.85 45.61 10.4 7.1
14 17 735 0.85 67.19 6.3 5.9
16 20 650 0.95 59.42 7.7 6.2
CG063-11P-100L-06D 37
18 21 596 1.05 54.49 8.3 6.4 168
CF063-11P-100L-06D 42
19 23 544 1.15 49.74 8.9 6.5
21 26 499 1.25 45.61 9.3 6.6
24 29 433 1.00 60.00 9.8 6.8
26 32 397 1.00 55.02 10.1 6.9
31 37 343 1.75 47.55 10.4 7.1
33 40 315 1.80 43.60 10.5 7.2
39 48 267 2.30 36.92 10.7 7.3
43 52 244 2.50 33.86 10.8 7.4
44 53 241 1.00 33.43 10.8 7.1 CG062-11P-90S/L-04E 31
168
48 58 219 2.75 30.30 10.9 7.5 CF062-11P-90S/L-04E 36
49 59 214 1.00 29.67 10.9 7.2
52 63 201 3.00 27.78 10.8 7.5
55 66 191 1.80 26.49 10.6 7.3
62 75 170 1.80 23.52 10.2 7.4
71 86 149 2.55 20.57 9.8 7.5
80 96 132 2.55 18.26 9.4 7.5

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 63

 PN = 1.1 kW IE3
50 Hz 60 Hz at 50 Hz

1.1 kW 1.3 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
20 24 520 1.20 47.55 9.1 6.6
22 27 477 1.20 43.60 9.5 6.7
26 32 404 1.50 36.92 10.0 6.9
28 34 370 1.65 33.86 10.2 7.0

C 32
35
38
42
332
304
1.85
2.00
30.30
27.78
10.4
10.6
7.1
7.2
36 44 290 1.20 26.49 10.6 6.9
CG062-11P-100L-06D 37
41 50 257 2.35 23.46 10.8 7.4 168
CF062-11P-100L-06D 42
45 54 235 2.55 21.51 10.8 7.4
47 57 225 1.70 20.57 10.9 7.2
53 64 200 1.70 18.26 10.6 7.2
57 69 185 2.05 16.88 10.4 7.3
64 78 164 2.05 14.98 10.1 7.4
73 89 143 2.65 13.07 9.7 7.5
83 100 127 2.65 11.60 9.3 7.6
21 25 511 0.80 70.71 1.6 5.7
24 29 445 0.90 61.63 4.0 6.1
26 31 404 1.00 56.02 4.9 6.2
CG053-11P-90S/L-04E 27
30 36 355 1.15 49.20 5.7 6.5 166
CF053-11P-90S/L-04E 32
33 39 323 1.25 44.73 6.1 6.6
36 44 291 1.40 40.33 6.4 6.8
40 48 265 1.55 36.67 6.7 6.9
30 37 347 1.00 48.13 5.8 6.5
33 40 316 1.00 43.75 6.1 6.6
38 46 274 1.50 38.00 6.6 6.9
42 51 249 1.65 34.55 6.8 6.9
49 60 213 1.90 29.46 7.0 7.1
50 60 211 1.00 29.17 7.1 6.9
54 66 193 2.10 26.79 7.2 7.2
57 69 183 1.00 25.38 7.2 7.0
CG052-11P-90S/L-04E 26
60 73 174 2.30 24.12 7.3 7.3 166
CF052-11P-90S/L-04E 31
63 76 166 1.65 23.03 7.3 7.1
66 80 158 2.55 21.92 7.4 7.4
73 88 145 1.65 20.04 7.4 7.2
78 95 134 3.00 18.56 7.5 7.5
81 99 129 2.10 17.86 7.3 7.4
94 113 112 2.10 15.54 7.0 7.4
100 120 106 2.55 14.62 6.9 7.5
114 138 92 2.55 12.72 6.6 7.6
25 31 416 1.00 38.00 4.7 6.2
28 34 378 1.10 34.55 5.3 6.4
33 40 322 1.25 29.46 6.1 6.6
36 43 293 1.40 26.79 6.4 6.7
40 48 264 1.55 24.12 6.7 6.9
42 51 252 1.10 23.03 6.8 6.7
44 53 240 1.70 21.92 6.9 7.0
48 58 219 1.10 20.04 7.0 6.8
52 63 203 2.00 18.56 7.1 7.2
CG052-11P-100L-06D 32
54 65 195 1.40 17.86 7.2 7.0 166
CF052-11P-100L-06D 37
57 69 185 2.20 16.88 7.2 7.2
62 75 170 1.40 15.54 7.3 7.1
66 80 160 1.70 14.62 7.3 7.2
68 83 153 2.65 14.03 7.4 7.4
75 91 140 2.90 12.75 7.4 7.5
85 104 123 2.20 11.25 7.2 7.4
98 119 107 2.20 9.79 6.9 7.5
113 137 93 2.90 8.50 6.7 7.6
130 158 81 2.90 7.40 6.4 7.6

Legend see page 29

64 WG20 Gear Units and Geared Motors www.weg.net

 PN = 1.1 kW IE3
50 Hz 60 Hz at 50 Hz

1.1 kW 1.3 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
42 50 252 0.80 34.88 3.9 3.0
46 56 229 0.90 31.67 4.3 3.1
53 64 200 1.00 27.71 4.6 3.4
58 70 182 1.15 25.17 4.5 3.4
68
74
82
90
155
141
1.30
0.95
21.40
19.54
4.4
4.2
3.6
3.5
C
75 91 140 1.45 19.44 4.3 3.7
85 103 123 1.65 17.09 4.2 3.8
94 113 112 1.20 15.53 4.0 3.8
107 130 98 1.20 13.54 3.9 3.8 CG032-11P-90S/L-04E 22
164
113 136 93 2.10 12.92 3.9 4.0 CF032-11P-90S/L-04E 24
121 147 87 1.55 11.99 3.8 3.9
124 150 85 2.35 11.73 3.8 4.1
139 168 75 1.55 10.46 3.7 4.0
148 179 71 2.55 9.82 3.7 4.2
152 184 69 1.90 9.57 3.6 4.1
163 197 64 2.85 8.92 3.6 4.2
174 211 60 1.90 8.35 3.5 4.1
201 243 52 2.50 7.24 3.3 4.2
231 279 46 2.55 6.31 3.2 4.2
45 54 234 0.90 21.40 4.2 3.1
49 60 213 0.95 19.44 4.6 3.3
56 68 187 1.10 17.09 4.6 3.4
62 75 170 0.80 15.53 4.3 3.3
71 86 148 0.80 13.54 4.2 3.4
74 90 141 1.40 12.92 4.3 3.7
80 97 131 1.00 11.99 4.2 3.6
82 99 128 1.55 11.73 4.2 3.8
92 111 114 1.00 10.46 4.0 3.7
98 119 107 1.70 9.82 4.1 3.9
100 122 105 1.25 9.57 4.0 3.8
CG032-11P-100L-06D 28
108 131 98 1.90 8.92 4.0 4.0 164
CF032-11P-100L-06D 30
115 140 91 1.25 8.35 3.8 3.9
126 153 84 2.05 7.64 3.8 4.1
133 161 79 1.65 7.24 3.7 4.0
138 168 76 2.30 6.94 3.7 4.1
152 185 69 1.70 6.31 3.6 4.1
161 195 65 2.45 5.96 3.6 4.2
175 212 60 2.20 5.50 3.5 4.1
177 215 59 2.70 5.41 3.5 4.2
200 243 52 2.20 4.80 3.3 4.2
224 272 47 2.80 4.28 3.3 4.2
257 312 41 2.80 3.73 3.1 4.3
98 118 107 0.80 14.88 2.7 0.9
109 132 96 0.90 13.33 2.7 1.0
113 137 93 0.95 12.83 2.6 1.0
127 153 83 1.05 11.50 2.6 1.1
130 157 81 1.05 11.20 2.6 1.1
145 175 72 1.15 10.04 2.5 1.2
152 183 69 1.00 9.60 2.4 1.0 CG012-11P-90S/L-04E 20
162
177 214 59 1.30 8.22 2.4 1.2 CF012-11P-90S/L-04E 21
194 235 54 1.25 7.50 2.3 1.1
198 239 53 1.40 7.36 2.3 1.3
260 314 40 1.65 5.60 2.1 1.3
301 364 35 1.90 4.83 2.1 1.3
345 417 30 2.20 4.22 2.0 1.4
470 569 22 2.85 3.09 1.8 1.4

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 65

 PN = 1.5 kW IE3
50 Hz 60 Hz at 50 Hz

1.5 kW 1.8 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
0.59 0.72 21482 0.85 2448.96 101.9 21.0
0.60 0.73 21035 0.90 2404.16 103.6 21.4 CG165-11P-90S/L-04F 706
194
0.71 0.86 17799 1.05 2050.07 113.9 24.3 CF165-11P-90S/L-04F 729
0.87 1.1 14242 1.30 1661.50 122.5 27.6

C 0.69
0.80
0.84
0.97
18694
16003
1.00
1.15
2093.95
1803.51
111.3
118.5
23.5
26.0
0.87 1.1 14645 1.25 1657.33 121.6 27.2
0.93 1.1 13728 1.35 1559.96 123.5 28.0
1.0 1.2 12683 1.45 1447.11 125.5 29.0
CG164-11P-90S/L-04F 693
1.1 1.4 11117 1.65 1278.93 128.1 30.4 192
CF164-11P-90S/L-04F 716
1.2 1.4 10811 1.70 1246.39 128.6 30.7
1.3 1.6 9476 1.90 1101.54 130.4 31.9
1.5 1.8 8078 2.25 952.78 132.1 33.2
1.6 1.9 7881 2.30 931.50 132.3 33.3
1.8 2.2 6753 2.70 811.56 133.4 34.4
0.77 0.93 16975 0.80 1885.79 85.3 10.5
0.87 1.1 14969 0.90 1669.82 91.7 12.5
0.89 1.1 14562 0.90 1624.38 92.9 12.9
1.0 1.2 12972 1.05 1455.92 97.0 14.5
1.2 1.4 11105 1.20 1254.10 101.0 16.4
1.3 1.6 9672 1.35 1099.05 103.6 17.8
1.4 1.7 9218 1.45 1051.77 104.4 18.3
1.5 1.8 8347 1.60 958.27 105.7 19.1 CG144-11P-90S/L-04F 442
188
1.6 1.9 7856 1.70 905.71 106.3 19.6 CF144-11P-90S/L-04F 460
1.7 2.1 7327 1.80 848.21 107.0 20.2
1.8 2.1 7116 1.85 825.43 107.3 20.4
2.0 2.4 6310 2.10 739.56 108.1 21.2
2.1 2.5 5961 2.20 701.59 108.5 21.5
2.3 2.8 5356 2.45 637.04 109.1 22.1
2.4 2.9 5122 2.55 611.72 109.3 22.4
2.6 3.2 4527 2.90 548.57 109.7 23.0
1.3 1.6 9840 0.85 1095.41 55.2 18.3
1.4 1.7 9551 0.85 1063.29 56.5 18.6
1.5 1.8 8600 0.95 961.31 60.6 19.7
1.6 1.9 8202 1.00 918.68 62.0 20.1
1.7 2.1 7419 1.10 834.47 64.7 21.0
2.0 2.4 6556 1.25 741.90 67.2 22.0
2.3 2.7 5644 1.45 644.01 69.4 23.1
2.4 2.9 5367 1.50 613.66 70.0 23.4 CG134-11P-90S/L-04F 295
184
2.6 3.2 4827 1.70 556.43 71.0 24.0 CF134-11P-90S/L-04F 297
2.7 3.3 4611 1.75 532.69 71.4 24.2
2.8 3.4 4509 1.80 521.98 71.6 24.3
3.2 3.8 3935 2.05 460.25 72.5 25.0
3.7 4.5 3302 2.45 392.69 73.4 25.7
3.8 4.6 3205 2.50 382.01 73.5 25.8
4.3 5.2 2800 2.90 339.29 73.9 26.3
4.4 5.3 2731 2.95 331.61 74.0 26.4
2.3 2.8 5656 0.80 628.39 28.1 20.0
2.7 3.3 4753 0.95 531.25 34.2 21.2
2.8 3.4 4591 1.00 514.28 35.0 21.4
3.3 4.0 3850 1.20 434.78 38.5 22.3
3.5 4.2 3685 1.25 417.03 39.1 22.5 CG134-11P-90S/L-04F 181
184
4.1 5.0 3084 1.50 352.56 41.1 23.3 CF134-11P-90S/L-04F 185
4.2 5.0 3053 1.50 349.11 41.2 23.3
4.9 5.9 2550 1.80 295.14 42.6 24.0
5.1 6.2 2439 1.85 282.94 42.8 24.1
6.1 7.3 2028 2.25 239.20 43.7 24.6
5.9 7.1 2435 1.85 246.43 42.9 24.1
7.0 8.4 2058 2.20 208.33 43.6 24.6 CG103-11P-90S/L-04F 168
178
8.0 9.7 1782 2.55 180.35 44.1 24.9 CF103-11P-90S/L-04F 172
9.1 11 1578 2.90 159.72 44.4 25.2

Legend see page 29

66 WG20 Gear Units and Geared Motors www.weg.net

PN = 1.5 kW IE3
50 Hz 60 Hz at 50 Hz

1.5 kW 1.8 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
3.3 4.0 3982 0.80 442.39 12.2 24.1
3.5 4.3 3691 0.85 410.85 16.5 24.5
4.0 4.9 3209 0.95 358.73 21.3 25.3
4.1 5.0 3144 1.00 352.17 21.8 25.4 CG094-11P-90S/L-04F 139
176
4.2
4.8
5.1
5.8
3071
2665
1.00
1.15
343.93
300.30
22.4
25.1
25.5
26.1
CF094-11P-90S/L-04F 137
C
5.2 6.3 2463 1.25 278.74 26.2 26.4
6.0 7.2 2133 1.45 243.38 27.7 26.8
4.7 5.7 3030 1.00 306.73 22.7 25.5
6.0 7.2 2398 1.30 242.77 26.5 26.5
6.8 8.3 2094 1.45 211.98 27.9 26.9
7.7 9.4 1851 1.65 187.34 28.8 27.3
CG093-11P-90S/L-04F 126
9.2 11 1565 1.95 158.42 29.7 27.7 174
CF093-11P-90S/L-04F 124
9.4 11 1524 2.00 154.24 29.8 27.7
11 13 1345 2.25 136.18 30.3 28.0
12 14 1206 2.50 122.08 30.6 28.2
14 16 1053 2.85 106.60 30.9 28.4
7.7 9.4 1852 0.85 187.48 18.2 18.7
10 12 1429 1.10 144.69 21.0 19.6
12 15 1182 1.35 119.68 22.2 20.1
CG083-11P-90S/L-04F 73
14 17 1006 1.55 101.80 22.8 20.4 172
CF083-11P-90S/L-04F 77
16 20 872 1.80 88.23 23.3 20.7
19 24 736 2.15 74.50 23.6 21.0
24 29 606 2.60 61.37 23.9 21.3
27 32 535 2.90 54.18 24.1 21.4 CG082-11P-90S/L-04F 72
172
CF082-11P-90S/L-04F 76
14 17 1032 0.80 104.50 8.1 12.5
15 18 939 0.90 95.06 9.4 12.5
17 20 851 1.00 86.17 10.4 13.0
18 22 774 1.10 78.39 11.1 13.0
21 25 698 1.20 70.68 11.7 13.5
23 27 635 1.30 64.30 12.1 13.5 CG073-11P-90S/L-04F 49
170
24 29 593 1.40 60.06 12.4 13.8 CF073-11P-90S/L-04F 53
27 32 540 1.55 54.63 12.7 13.8
29 36 488 1.70 49.38 13.0 14.1
32 39 444 1.80 44.92 13.2 14.0
37 45 387 2.00 39.17 13.4 14.3
41 49 352 2.10 35.63 13.5 14.3
37 45 385 2.15 38.92 13.4 14.3
41 50 350 2.35 35.41 13.5 14.3 CG072-11P-90S/L-04F 48
170
47 57 302 2.75 30.55 13.6 14.6 CF072-11P-90S/L-04F 52
52 63 275 3.00 27.79 13.7 14.6
20 24 724 0.85 73.28 6.5 6.0
22 26 664 0.95 67.19 7.5 6.2
24 30 587 1.05 59.42 8.4 6.4 CG063-11P-90S/L-04F 33
168
27 32 538 1.15 54.49 8.9 6.5 CF063-11P-90S/L-04F 38
29 35 491 1.25 49.74 9.4 6.7
32 38 451 1.35 45.61 9.7 6.8
30 37 470 1.30 47.55 9.5 6.7
33 40 431 1.35 43.60 9.8 6.8
39 48 365 1.65 36.92 10.3 7.0
43 52 334 1.80 33.86 10.4 7.1
48 58 299 2.05 30.30 10.6 7.2
52 63 274 2.20 27.78 10.5 7.3
55 66 262 1.35 26.49 10.3 7.0
CG062-11P-90S/L-04F 33
62 75 232 2.60 23.46 10.0 7.4 168
CF062-11P-90S/L-04F 38
67 82 213 2.85 21.51 9.8 7.5
70 85 203 1.90 20.57 9.6 7.3
79 96 180 1.90 18.26 9.3 7.3
86 104 167 2.30 16.88 9.1 7.4
97 117 148 2.30 14.98 8.8 7.5
111 134 129 2.95 13.07 8.4 7.6
125 151 115 2.95 11.60 8.1 7.6

www.weg.net WG20 Gear Units and Geared Motors 67

 PN = 1.5 kW IE3
50 Hz 60 Hz at 50 Hz

1.5 kW 1.8 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
29 36 486 0.85 49.20 2.8 5.9
32 39 442 0.95 44.73 4.1 6.1 CG053-11P-90S/L-04F 28
166
36 44 398 1.05 40.33 5.0 6.3 CF053-11P-90S/L-04F 33
40 48 362 1.15 36.67 5.6 6.4

C 38
42
46
51
375
341
1.10
1.20
38.00
34.55
5.4
5.8
6.4
6.5
49 60 291 1.40 29.46 6.4 6.8
54 66 265 1.55 26.79 6.7 6.9
60 73 238 1.70 24.12 6.9 7.0
63 76 228 1.20 23.03 6.9 6.8
66 80 217 1.85 21.92 7.0 7.1
72 88 198 1.20 20.04 7.1 6.9
CG052-11P-90S/L-04F 27
78 95 183 2.20 18.56 7.2 7.3 166
CF052-11P-90S/L-04F 32
81 98 176 1.55 17.86 7.1 7.1
86 104 167 2.40 16.88 7.0 7.3
93 113 153 1.55 15.54 6.8 7.2
99 120 144 1.85 14.62 6.7 7.3
103 125 139 2.90 14.03 6.7 7.5
114 138 126 1.85 12.72 6.5 7.4
129 156 111 2.45 11.25 6.3 7.5
148 179 97 2.40 9.79 6.0 7.5
58 70 249 0.85 25.17 4.0 3.0
68 82 211 0.95 21.40 4.1 3.3
75 90 192 1.05 19.44 4.0 3.4
85 103 169 1.20 17.09 3.9 3.5
93 113 153 1.35 15.52 3.9 3.6
107 130 134 0.90 13.54 3.6 3.6
112 136 128 1.55 12.92 3.7 3.8
121 146 118 1.10 11.99 3.6 3.7
124 150 116 1.75 11.73 3.6 3.9
139 168 103 1.15 10.46 3.5 3.8
148 179 97 1.90 9.82 3.5 4.0 CG032-11P-90S/L-04F 23
164
151 183 95 1.40 9.57 3.4 3.9 CF032-11P-90S/L-04F 25
163 197 88 2.10 8.92 3.4 4.0
174 210 82 1.40 8.35 3.3 4.0
190 230 75 2.25 7.64 3.3 4.1
200 243 71 1.85 7.24 3.2 4.1
209 253 69 2.50 6.94 3.2 4.2
230 278 62 1.85 6.31 3.1 4.1
243 294 59 2.70 5.96 3.1 4.2
264 319 54 2.40 5.50 3.0 4.2
268 324 53 3.00 5.41 3.0 4.3
302 366 47 2.45 4.80 2.9 4.2
129 157 111 0.80 11.20 2.4 0.9
144 175 99 0.85 10.04 2.3 1.0
176 214 81 0.95 8.22 2.3 1.1
193 234 74 0.90 7.50 2.1 1.0
CG012-11P-90S/L-04F 21
197 238 73 1.05 7.36 2.2 1.2 162
CF012-11P-90S/L-04F 22
259 313 55 1.20 5.60 2.0 1.1
300 363 48 1.40 4.83 2.0 1.2
344 416 42 1.60 4.22 1.9 1.3
469 567 31 2.10 3.09 1.8 1.4

Legend see page 29

68 WG20 Gear Units and Geared Motors www.weg.net

 PN = 2.2 kW IE3
50 Hz 60 Hz at 50 Hz

2.2 kW 2.6 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
0.79 0.96 23731 0.80 1820.82 92.6 18.9
0.86 1.1 21599 0.85 1661.50 101.5 20.9 CG165-11P-100L-04E 716
194
0.90 1.1 20774 0.90 1602.16 104.5 21.6 CF165-11P-100L-04E 739
1.1 1.4 16109 1.15 1258.36 118.3 25.9
0.87
0.92
1.1
1.1
22063
20725
0.85
0.90
1657.33
1559.96
99.7
104.7
20.5
21.7
C
0.99 1.2 19186 0.95 1447.11 109.8 23.1
1.0 1.2 18887 1.00 1427.45 110.7 23.3
1.1 1.4 16852 1.10 1278.93 116.4 25.2
1.2 1.4 16423 1.10 1246.39 117.5 25.6
1.3 1.6 14426 1.25 1101.54 122.1 27.4 CG164-11P-100L-04E 703
192
1.5 1.8 12350 1.50 952.78 126.1 29.3 CF164-11P-100L-04E 726
1.8 2.2 10411 1.75 811.56 129.2 31.0
2.1 2.5 8856 2.05 698.99 131.2 32.5
2.4 2.9 7550 2.40 604.60 132.7 33.6
2.5 3.0 7166 2.55 577.48 133.0 34.0
2.8 3.4 6348 2.85 517.99 133.8 34.7
2.9 3.5 6083 3.00 499.49 134.0 35.0
1.1 1.4 16730 0.80 1254.10 86.1 10.7
1.2 1.4 16288 0.80 1221.03 87.6 11.2
1.3 1.6 14601 0.90 1099.05 92.8 12.9
1.4 1.7 13945 0.95 1051.77 94.5 13.5
1.5 1.8 12653 1.05 958.27 97.7 14.8
1.6 1.9 11934 1.10 905.71 99.3 15.5
1.7 2.1 11131 1.20 848.21 101.0 16.3
1.9 2.4 9645 1.35 739.56 103.7 17.8
2.0 2.5 9232 1.45 710.80 104.3 18.2
2.3 2.7 8223 1.60 637.04 105.8 19.3
CG144-11P-100L-04E 452
2.4 2.9 7672 1.70 596.77 106.6 19.8 188
CF144-11P-100L-04E 470
2.6 3.2 6994 1.90 548.57 107.4 20.5
2.7 3.3 6704 1.95 526.92 107.7 20.8
2.8 3.4 6606 2.00 520.33 107.8 20.9
3.2 3.8 5690 2.30 453.75 108.8 21.8
3.3 4.0 5454 2.40 436.75 109.0 22.0
3.4 4.1 5237 2.50 421.15 109.2 22.3
3.7 4.5 4780 2.75 388.44 109.5 22.7
3.8 4.6 4676 2.80 380.80 109.6 22.8
3.9 4.8 4491 2.90 367.20 109.8 23.0
4.0 4.9 4382 3.00 359.79 109.8 23.1
1.9 2.4 9877 0.85 741.90 55.0 18.2
2.0 2.4 9598 0.85 720.98 56.3 18.5
2.2 2.7 8538 0.95 644.01 60.8 19.7
2.3 2.8 8119 1.00 613.66 62.3 20.2
2.6 3.1 7332 1.10 556.43 64.9 21.1
2.7 3.3 7005 1.15 532.69 65.9 21.5
3.1 3.8 6003 1.35 460.25 68.6 22.6
3.2 3.9 5897 1.40 453.11 68.8 22.8
3.7 4.4 5069 1.60 392.69 70.6 23.7
3.8 4.6 4921 1.65 382.01 70.9 23.9
CG134-11P-100L-04E 305
3.9 4.7 4735 1.70 368.37 71.2 24.1 184
CF134-11P-100L-04E 307
4.2 5.1 4335 1.85 339.29 71.9 24.5
4.3 5.3 4228 1.90 331.61 72.1 24.7
4.5 5.5 4060 2.00 319.76 72.3 24.9
4.6 5.5 3987 2.05 314.70 72.4 24.9
5.0 6.1 3600 2.25 286.51 73.0 25.4
5.2 6.3 3457 2.35 276.28 73.2 25.6
5.3 6.4 3418 2.35 273.18 73.2 25.6
5.6 6.8 3202 2.50 257.51 73.5 25.8
6.1 7.4 2899 2.80 236.02 73.8 26.2
6.4 7.8 2728 2.95 223.53 74.0 26.4

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 69

 PN = 2.2 kW IE3
50 Hz 60 Hz at 50 Hz

2.2 kW 2.6 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
3.3 4.0 5800 0.80 434.78 26.9 19.8
3.4 4.2 5552 0.85 417.03 28.9 20.1
4.1 4.9 4665 1.00 352.56 34.7 21.3
4.9 5.9 3873 1.20 295.14 38.4 22.3

C 5.1
5.3
6.2
6.4
3705
3566
1.25
1.30
282.94
272.83
39.0
39.5
22.5
22.7
CG104-11P-100L-04E
CF104-11P-100L-04E
305
307
180

6.0 7.3 3107 1.45 239.20 41.1 23.2

6.2 7.6 2984 1.55 230.65 41.4 23.4
6.7 8.1 2760 1.65 214.29 42.1 23.7
7.9 9.6 2300 2.00 181.16 43.1 24.3
5.8 7.1 3608 1.25 246.43 39.4 22.6
6.9 8.4 3050 1.50 208.33 41.2 23.3
8.0 9.7 2640 1.75 180.35 42.4 23.8
9.0 11 2339 1.95 159.72 43.1 24.2 CG103-11P-100L-04E 178
178
10 13 2023 2.25 138.17 43.7 24.6 CF103-11P-100L-04E 182
11 13 1951 2.35 133.24 43.8 24.7
12 14 1786 2.55 122.02 44.1 24.9
14 17 1510 3.00 103.15 44.5 25.3
5.1 6.3 3711 0.85 278.74 16.2 24.5
5.3 6.5 3578 0.85 268.78 17.8 24.7
5.4 6.5 3551 0.85 266.72 18.1 24.8
CG094-11P-100L-04E 149
5.9 7.2 3227 0.95 243.38 21.1 25.2 176
CF094-11P-100L-04E 147
6.1 7.4 3105 1.00 234.69 22.1 25.4
6.8 8.3 2782 1.10 211.11 24.3 25.9
7.8 9.5 2414 1.25 184.33 26.4 26.4
5.9 7.2 3554 0.85 242.77 18.0 24.7
6.8 8.2 3104 1.00 211.98 22.1 25.4
7.7 9.3 2743 1.10 187.34 24.6 25.9
9.1 11 2320 1.30 158.42 26.9 26.6
9.3 11 2258 1.35 154.24 27.1 26.7
11 13 1994 1.55 136.18 28.3 27.1
12 14 1787 1.70 122.08 29.0 27.4 CG093-11P-100L-04E 136
174
13 16 1561 1.95 106.60 29.7 27.7 CF093-11P-100L-04E 134
14 17 1491 2.05 101.85 29.9 27.8
15 18 1438 2.10 98.21 30.0 27.9
17 20 1269 2.40 86.68 30.5 28.1
18 22 1166 2.60 79.66 30.7 28.3
20 24 1065 2.85 72.72 30.9 28.4
21 25 1003 3.00 68.48 31.0 28.5
12 15 1752 0.90 119.68 19.0 18.9
14 17 1490 1.05 101.80 20.7 19.5
16 20 1292 1.20 88.23 21.7 19.9
19 23 1091 1.45 74.50 22.5 20.3 CG083-11P-100L-04E 83
172
20 24 1052 1.50 71.84 22.7 20.4 CF083-11P-100L-04E 87
23 28 899 1.75 61.37 23.2 20.7
29 35 735 2.15 50.22 23.6 21.0
35 42 607 2.60 41.43 23.9 21.3
26 32 793 2.00 54.18 23.5 20.9
33 41 628 2.50 42.88 23.9 21.2
CG082-11P-100L-04E 82
38 47 548 2.85 37.44 23.4 21.4 172
CF082-11P-100L-04E 86
46 56 457 2.45 31.23 22.0 21.4
51 63 408 2.45 27.88 21.2 21.5
20 25 1035 0.80 70.68 8.1 12.5
22 27 941 0.90 64.30 9.4 12.5
24 29 879 0.95 60.06 10.1 13.0
26 32 800 1.05 54.63 10.9 13.0
29 35 723 1.15 49.38 11.5 13.4
30 37 697 1.20 47.62 11.7 13.5 CG073-11P-100L-04E 59
170
32 39 658 1.25 44.92 12.0 13.4 CF073-11P-100L-04E 63
33 40 634 1.25 43.32 12.2 13.5
37 45 573 1.35 39.17 12.5 13.8
40 49 522 1.40 35.63 12.8 13.8
43 53 485 1.50 33.15 13.0 14.1
48 58 442 1.55 30.16 13.2 14.1

70 WG20 Gear Units and Geared Motors www.weg.net

 PN = 2.2 kW IE3
50 Hz 60 Hz at 50 Hz

2.2 kW 2.6 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
37 45 570 1.45 38.92 12.5 13.8
41 49 518 1.60 35.41 12.8 13.8
47 57 447 1.85 30.55 13.1 14.2
52 63 407 2.05 27.79 13.3 14.2
61
67
74
81
345
314
2.35
2.50
23.58
21.45
13.5
13.6
14.4
14.4
C
CG072-11P-100L-04E 58
70 85 302 2.30 20.65 13.6 14.1 170
CF072-11P-100L-04E 62
74 89 286 2.70 19.50 13.7 14.6
75 92 278 2.30 19.02 13.7 14.2
81 98 260 2.85 17.74 13.7 14.6
87 105 243 3.00 16.59 13.8 14.7
89 108 237 2.85 16.20 13.8 14.4
96 117 219 2.90 14.93 13.8 14.4
26 32 798 0.80 54.49 4.9 5.8
29 35 728 0.85 49.74 6.4 6.0
CG063-11P-100L-04E 43
31 38 668 0.90 45.61 7.4 6.1 168
CF063-11P-100L-04E 48
47 57 447 1.35 30.53 9.7 6.8
51 62 410 1.50 28.00 10 6.9
39 47 541 1.15 36.92 8.9 6.5
42 52 496 1.25 33.86 9.3 6.6
47 58 444 1.40 30.30 9.7 6.8
52 63 407 1.50 27.78 10.0 6.9
61 74 344 1.75 23.46 9.7 7.1
67 81 315 1.95 21.51 9.5 7.2
70 85 301 1.30 20.57 9.3 6.8
79 96 267 1.30 18.26 9.0 7.0
CG062-11P-100L-04E 42
80 98 261 2.30 17.85 9.1 7.3 168
CF062-11P-100L-04E 47
85 103 247 1.55 16.88 8.8 7.1
88 107 240 2.55 16.36 8.8 7.4
96 116 219 1.55 14.98 8.5 7.2
98 119 215 2.80 14.72 8.6 7.5
110 133 191 2.00 13.07 8.2 7.3
124 150 170 2.00 11.60 7.9 7.4
144 176 146 2.60 9.94 7.6 7.5
163 198 129 2.60 8.83 7.4 7.5
49 59 431 0.95 29.46 4.3 6.1
54 65 392 1.05 26.79 5.1 6.3
60 72 353 1.15 24.12 5.7 6.5
65 80 321 1.25 21.92 6.1 6.6
77 94 272 1.50 18.56 6.6 6.9
80 98 261 1.05 17.86 6.7 6.6
85 103 247 1.65 16.88 6.7 7.0
92 112 227 1.05 15.54 6.5 6.7
98 119 214 1.25 14.62 6.4 6.9
102 124 205 1.95 14.03 6.5 7.2
CG052-11P-100L-04E 37
113 137 187 2.15 12.75 6.3 7.2 166
CF052-11P-100L-04E 42
113 137 186 1.25 12.72 6.2 7.0
125 152 168 2.40 11.48 6.1 7.3
128 155 165 1.65 11.25 6.0 7.2
138 167 153 2.65 10.43 6.0 7.4
147 178 143 1.65 9.79 5.8 7.2
154 187 136 2.95 9.31 5.8 7.5
169 205 124 2.15 8.50 5.6 7.4
194 236 108 2.15 7.40 5.4 7.5
206 251 102 2.65 6.96 5.3 7.5
237 288 89 2.65 6.05 5.1 7.6

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 71

 PN = 2.2 kW IE3
50 Hz 60 Hz at 50 Hz

2.2 kW 2.6 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
84 102 250 0.80 17.09 3.5 3.0
92 112 227 0.90 15.52 3.4 3.2
111 135 189 1.05 12.92 3.4 3.4
122 149 172 1.20 11.73 3.3 3.5

C 146
150
178
182
144
140
1.30
0.95
9.82
9.57
3.3
3.1
3.7
3.5
161 196 131 1.45 8.92 3.2 3.8
172 209 122 0.95 8.35 3.1 3.6
188 228 112 1.55 7.64 3.1 3.9
198 241 106 1.25 7.24 3.0 3.8 CG032-11P-100L-04E 33
164
207 252 102 1.70 6.94 3.0 4.0 CF032-11P-100L-04E 35
227 277 92 1.25 6.31 2.9 3.9
241 293 87 1.85 5.96 3.0 4.1
261 317 81 1.65 5.50 2.9 4.0
265 322 79 2.05 5.41 2.9 4.1
299 364 70 1.65 4.80 2.8 4.1
335 408 63 2.10 4.28 2.7 4.1
385 468 55 2.10 3.73 2.6 4.2
430 522 49 2.70 3.34 2.5 4.2
493 599 43 2.50 2.91 2.4 4.3

Legend see page 29

72 WG20 Gear Units and Geared Motors www.weg.net

 PN = 3.0 kW IE3
50 Hz 60 Hz at 50 Hz

3.0 kW 3.6 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
1.1 1.4 22229 0.85 1258.36 99 20.3 CG165-11P-L100L-04F 723
194
CF165-11P-L100L-04F 746
1.1 1.4 23184 0.80 1278.93 95.0 19.4
1.2 1.4 22594 0.80 1246.39 97.5 20.0
1.3
1.5
1.6
1.8
19846
17061
0.95
1.10
1101.54
952.78
107.7
115.9
22.5
25.0
C
1.8 2.1 14442 1.25 811.56 122.0 27.4
2.1 2.5 12312 1.50 698.99 126.1 29.3
CG164-11P-L100L-04F 710
2.4 2.9 10540 1.75 604.60 129.0 30.9 192
CF164-11P-L100L-04F 733
2.5 3.0 10046 1.80 577.48 129.7 31.4
2.8 3.4 8919 2.05 517.99 131.1 32.4
2.9 3.5 8582 2.10 499.49 131.5 32.7
3.3 3.9 7465 2.45 440.86 132.7 33.7
3.4 4.1 7225 2.50 427.56 133.0 33.9
3.9 4.7 6133 2.95 369.82 134.0 34.9
1.6 1.9 16418 0.80 905.71 87.2 11.0
1.7 2.1 15345 0.85 848.21 90.6 12.1
1.9 2.4 13297 1.00 739.56 96.2 14.2
2.0 2.4 12754 1.05 710.80 97.5 14.7
2.1 2.5 12589 1.05 701.59 97.9 14.9
2.3 2.7 11383 1.15 637.04 100.5 16.1
2.4 2.8 10909 1.20 611.72 101.4 16.6
2.6 3.2 9722 1.35 548.57 103.5 17.8
2.7 3.3 9319 1.40 526.92 104.2 18.2
2.8 3.3 9184 1.45 520.33 104.4 18.3
3.2 3.8 7943 1.65 453.75 106.2 19.5
CG144-11P-L100L-04F 459
3.3 4.0 7614 1.75 436.75 106.6 19.9 188
CF144-11P-L100L-04F 477
3.4 4.1 7327 1.80 421.15 107.0 20.2
3.7 4.5 6716 1.95 388.44 107.7 20.8
3.8 4.6 6570 2.00 380.80 107.9 20.9
3.9 4.7 6309 2.10 367.20 108.2 21.2
4.0 4.8 6169 2.15 359.79 108.3 21.3
4.3 5.2 5700 2.30 334.50 108.8 21.8
4.4 5.3 5578 2.35 328.01 108.9 21.9
4.6 5.5 5356 2.45 316.30 109.1 22.1
4.9 5.9 4944 2.65 294.41 109.4 22.5
5.1 6.2 4714 2.80 282.46 109.6 22.8
5.3 6.4 4526 2.90 272.37 109.7 23.0
2.6 3.1 10087 0.80 556.43 54.0 18.0
2.7 3.3 9637 0.85 532.69 56.1 18.5
2.8 3.3 9443 0.85 521.98 57.0 18.7
3.1 3.8 8275 1.00 460.25 61.8 20.0
3.2 3.8 8147 1.00 453.11 62.2 20.2
3.7 4.4 7017 1.15 392.69 65.9 21.5
3.8 4.6 6812 1.20 382.01 66.5 21.7
3.9 4.7 6555 1.25 368.37 67.2 22.0
4.2 5.1 6013 1.35 339.29 68.5 22.6
4.3 5.2 5865 1.40 331.61 68.9 22.8
CG134-11P-L100L-04F 312
4.5 5.4 5644 1.45 319.76 69.4 23.1 184
CF134-11P-L100L-04F 314
4.6 5.5 5554 1.45 314.70 69.6 23.2
5.0 6.1 5026 1.60 286.51 70.7 23.8
5.2 6.3 4826 1.70 276.28 71.0 24.0
5.3 6.4 4772 1.70 273.18 71.1 24.0
5.6 6.8 4480 1.80 257.51 71.6 24.4
6.1 7.4 4072 2.00 236.02 72.3 24.8
6.4 7.8 3841 2.10 223.53 72.7 25.1
6.8 8.2 3627 2.25 212.42 72.9 25.4
7.5 9.0 3270 2.45 193.13 73.4 25.8
7.8 9.4 3103 2.60 184.39 73.6 26.0

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 73

 PN = 3.0 kW IE3
50 Hz 60 Hz at 50 Hz

3.0 kW 3.6 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
4.9 5.9 5339 0.85 295.14 30.5 20.4
5.1 6.1 5108 0.90 282.94 32.1 20.7
5.3 6.4 4915 0.95 272.83 33.2 20.9
CG104-11P-L100L-04F 198
6.0 7.3 4292 1.05 239.20 36.5 21.7 180
CF104-11P-L100L-04F 202
C 6.2
6.7
7.5
8.1
4130
3821
1.10
1.20
230.65
214.29
37.3
38.6
21.9
22.3
7.9 9.6 3197 1.45 181.16 40.8 23.1
5.8 7.1 4903 0.95 246.43 33.3 21.0
6.9 8.4 4145 1.10 208.33 37.2 21.9
8.0 9.6 3588 1.30 180.35 39.5 22.6
9.0 11 3178 1.45 159.72 40.9 23.2
10 13 2749 1.65 138.17 42.1 23.7
CG103-11P-L100L-04F 185
11 13 2651 1.70 133.24 42.3 23.8 178
CF103-11P-L100L-04F 189
12 14 2428 1.90 122.02 42.9 24.1
14 17 2052 2.20 103.15 43.6 24.6
16 19 1777 2.55 89.30 44.1 24.9
17 20 1717 2.65 86.31 43.6 25.0
18 22 1573 2.90 79.08 42.6 25.2
6.8 8.2 3827 0.80 211.11 14.7 24.3 CG094-11P-L100L-04F 155
176
7.8 9.4 3321 0.95 184.33 20.3 25.1 CF094-11P-L100L-04F 153
7.7 9.3 3727 0.85 187.34 16.0 24.5
9.1 11 3152 1.00 158.42 21.7 25.3
9.3 11 3069 1.00 154.24 22.4 25.5
11 13 2709 1.15 136.18 24.8 26.0
12 14 2429 1.25 122.08 26.3 26.4
14 16 2121 1.45 106.60 27.7 26.9
15 18 1954 1.55 98.21 28.4 27.1 CG093-11P-L100L-04F 142
174
17 20 1725 1.75 86.68 29.2 27.5 CF093-11P-L100L-04F 140
18 22 1585 1.90 79.66 29.6 27.7
20 24 1447 2.10 72.72 30.0 27.9
21 25 1362 2.25 68.48 30.2 28.0
23 28 1219 2.50 61.28 30.6 28.2
24 29 1189 2.55 59.78 30.6 28.2
28 34 1019 2.95 51.22 31.0 28.5
14 17 2025 0.80 101.80 16.7 18.4
16 20 1755 0.90 88.23 19.0 18.9
19 23 1482 1.05 74.50 20.7 19.5
CG083-11P-L100L-04F 90
20 24 1429 1.10 71.84 21.0 19.6 172
CF083-11P-L100L-04F 94
23 28 1221 1.30 61.37 22.0 20.0
29 35 999 1.60 50.22 22.9 20.5
35 42 824 1.90 41.43 23.4 20.8
27 32 1078 1.45 54.18 22.6 20.3
34 41 853 1.85 42.88 23.3 20.8
38 46 745 2.10 37.44 23.6 21.0
44 53 658 2.40 33.09 22.6 21.2
CG082-11P-L100L-04F 89
46 56 621 1.80 31.23 22.3 21.0 172
CF082-11P-L100L-04F 93
51 62 557 2.80 27.98 21.4 21.4
52 62 555 1.80 27.88 21.4 21.1
58 70 492 2.30 24.72 20.5 21.3
65 79 439 2.30 22.07 19.7 21.4
26 32 1087 0.80 54.63 7.2 12.1
29 35 982 0.85 49.38 8.9 12.7
30 37 947 0.90 47.62 9.3 12.8
32 39 894 0.90 44.92 10.0 12.7
CG073-11P-L100L-04F 66
33 40 862 0.95 43.32 10.3 12.8 170
CF073-11P-L100L-04F 70
37 44 779 1.00 39.17 11.1 13.2
40 49 709 1.05 35.63 11.6 13.2
43 52 660 1.10 33.15 12.0 13.6
48 58 600 1.15 30.16 12.4 13.6

Legend see page 29

74 WG20 Gear Units and Geared Motors www.weg.net

 PN = 3.0 kW IE3
50 Hz 60 Hz at 50 Hz

3.0 kW 3.6 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
37 45 774 1.10 38.92 11.1 13.3
41 49 704 1.20 35.41 11.7 13.2
47 57 608 1.35 30.55 12.3 13.7
52 63 553 1.50 27.79 12.6 13.7
61
67
74
81
469
427
1.75
1.85
23.58
21.45
13.0
13.2
14.1
14.1
C
70 84 411 1.70 20.65 13.3 13.7
74 89 388 2.00 19.50 13.4 14.3
76 91 378 1.70 19.02 13.3 13.7
81 98 353 2.10 17.74 13.5 14.3
87 105 330 2.20 16.59 13.6 14.5
CG072-11P-L100L-04F 65
89 107 322 2.10 16.20 13.4 14.0 170
CF072-11P-L100L-04F 69
95 115 300 2.35 15.09 13.6 14.5
96 117 297 2.15 14.93 13.2 14.1
100 121 286 2.45 14.38 13.7 14.6
110 133 260 2.60 13.08 13.3 14.6
115 139 249 2.50 12.51 13.1 14.3
119 143 242 2.75 12.14 12.9 14.7
123 149 233 2.80 11.71 12.8 14.8
125 151 229 2.80 11.52 12.8 14.4
130 158 220 2.90 11.04 12.5 14.7
135 163 212 3.00 10.65 12.3 14.8
139 168 206 2.85 10.34 12.3 14.5
47 57 607 1.00 30.53 8.2 6.3 CG063-11P-L100L-04F 49
168
51 62 557 1.10 28.00 8.8 6.5 CF063-11P-L100L-04F 54
39 47 735 0.85 36.92 6.3 6.0
43 51 674 0.90 33.86 7.3 6.1
48 57 603 1.00 30.30 8.3 6.4
52 63 553 1.10 27.78 8.8 6.5
61 74 467 1.30 23.46 9.3 6.7
67 81 428 1.45 21.51 9.1 6.8
70 85 409 0.95 20.57 8.9 6.4
79 95 363 0.95 18.26 8.6 6.5
81 98 355 1.70 17.85 8.7 7.1
85 103 336 1.15 16.88 8.5 6.7
88 106 326 1.85 16.36 8.5 7.1
96 116 298 1.15 14.98 8.2 6.8
CG062-11P-L100L-04F 49
98 118 293 2.05 14.72 8.3 7.3 168
CF062-11P-L100L-04F 54
107 129 268 2.25 13.49 8.1 7.3
110 133 260 1.45 13.07 8.0 7.0
119 144 240 2.50 12.07 7.9 7.4
124 150 231 1.50 11.60 7.7 7.1
130 157 220 2.75 11.07 7.7 7.5
140 170 204 2.95 10.26 7.6 7.5
145 175 198 1.95 9.94 7.4 7.3
163 197 176 1.95 8.83 7.2 7.3
176 212 163 2.35 8.20 7.0 7.4
198 239 145 2.35 7.28 6.8 7.5
214 259 134 2.85 6.73 6.7 7.5
241 291 119 2.85 5.97 6.4 7.6

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 75

 PN = 3.0 kW IE3
50 Hz 60 Hz at 50 Hz

3.0 kW 3.6 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
54 65 533 0.80 26.79 ** 5.6
60 72 480 0.85 24.12 3.0 5.9
66 79 436 0.95 21.92 4.2 6.1
78 94 369 1.10 18.56 5.5 6.4

C 81
85
97
103
355
336
0.80
1.20
17.86
16.88
5.7
5.9
6.1
6.6
93 112 309 0.80 15.54 6.1 6.3
99 119 291 0.95 14.62 6.0 6.4
103 124 279 1.45 14.03 6.1 6.8
113 136 254 1.60 12.75 6.0 6.9
125 152 228 1.80 11.48 5.9 7.1
128 155 224 1.20 11.25 5.8 6.8
138 167 208 1.95 10.43 5.7 7.1
147 178 195 1.20 9.79 5.6 6.9
155 187 185 2.20 9.31 5.6 7.3
169 205 169 1.60 8.50 5.4 7.1
170 206 168 2.25 8.46 5.5 7.3
185 223 155 2.60 7.79 5.4 7.4
195 235 147 1.60 7.40 5.2 7.2 CG052-11P-L100L-04F 44
166
203 246 141 2.40 7.08 5.2 7.5 CF052-11P-L100L-04F 49
207 250 138 1.95 6.96 5.1 7.3
228 276 126 2.70 6.31 5.1 7.5
236 286 121 2.70 6.09 5.0 7.5
238 288 120 1.95 6.05 4.9 7.4
251 303 114 2.55 5.74 4.9 7.6
255 308 112 2.40 5.64 4.9 7.5
260 314 110 2.60 5.54 4.9 7.6
293 355 98 2.40 4.91 4.7 7.5
301 364 95 2.65 4.78 4.7 7.7
305 368 94 2.80 4.72 4.7 7.6
331 400 87 2.80 4.35 4.6 7.7
351 424 82 2.55 4.11 4.5 7.6
376 455 76 2.75 3.83 4.4 7.7
390 471 73 2.75 3.69 4.3 7.7
432 523 66 2.65 3.33 4.2 7.7
448 542 64 2.65 3.21 4.2 7.7
497 600 58 2.70 2.90 4.1 7.8
571 690 50 2.80 2.52 3.9 7.8
111 135 257 0.80 12.92 3.0 3.0
123 148 233 0.85 11.73 3.0 3.1
147 177 195 0.95 9.82 2.9 3.4
162 195 177 1.05 8.92 2.9 3.5
189 228 152 1.15 7.64 2.9 3.7
199 240 144 0.95 7.24 2.8 3.5
208 251 138 1.25 6.94 2.8 3.7
228 276 126 0.95 6.31 2.7 3.6 CG032-11P-L100L-04F 40
164
242 292 119 1.35 5.96 2.8 3.9 CF032-11P-L100L-04F 42
262 316 109 1.20 5.50 2.7 3.8
266 321 108 1.50 5.41 2.7 3.9
300 363 95 1.20 4.80 2.6 3.9
337 407 85 1.55 4.28 2.5 4.0
386 466 74 1.55 3.73 2.5 4.0
431 521 66 2.00 3.34 2.4 4.1
494 598 58 1.85 2.91 2.3 4.1

Legend see page 29 ** ... auf Anfrage

76 WG20 Gear Units and Geared Motors www.weg.net

 PN = 4.0 kW IE3
50 Hz 60 Hz at 50 Hz

4.0 kW 4.8 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
1.5 1.8 22870 0.80 952.78 96.4 19.7
1.6 1.9 22313 0.85 931.50 98.7 20.2
1.8 2.2 19361 0.95 811.56 109.2 22.9
2.1 2.5 16573 1.10 698.99 117.1 25.4
2.2
2.4
2.6
2.9
15864
14218
1.15
1.30
670.48
604.60
118.9
122.5
26.1
27.6
C
2.5 3.0 13916 1.30 591.77 123.1 27.9
CG164-11P-112M-04E 711
2.8 3.4 12081 1.50 517.99 126.5 29.5 192
CF164-11P-112M-04E 734
2.9 3.5 11626 1.55 499.49 127.3 29.9
3.3 4.0 10155 1.80 440.86 129.5 31.3
3.4 4.1 9829 1.85 427.56 130.0 31.6
3.5 4.2 9596 1.90 418.32 130.3 31.8
3.9 4.7 8396 2.15 369.82 131.7 32.9
4.0 4.9 8146 2.25 360.30 132.0 33.1
4.7 5.6 6944 2.60 311.64 133.2 34.2
2.0 2.5 17062 0.80 710.80 84.9 10.4
2.1 2.5 16841 0.80 701.59 85.7 10.6
2.3 2.8 15229 0.90 637.04 90.9 12.2
2.4 2.9 14623 0.90 611.72 92.7 12.8
2.6 3.2 13060 1.00 548.57 96.8 14.4
2.8 3.3 12519 1.05 526.92 98.0 15.0
3.2 3.9 10692 1.25 453.75 101.8 16.8
3.3 4.0 10270 1.30 436.75 102.6 17.2
3.4 4.2 9883 1.35 421.15 103.3 17.6
3.7 4.5 9078 1.45 388.44 104.6 18.4
3.8 4.5 9020 1.45 385.96 104.7 18.5
3.9 4.8 8547 1.55 367.20 105.4 18.9
CG144-11P-112M-04E 460
4.0 4.9 8357 1.60 359.79 105.6 19.1 188
CF144-11P-112M-04E 478
4.3 5.2 7737 1.70 334.50 106.5 19.7
4.4 5.4 7572 1.75 328.01 106.7 19.9
4.6 5.5 7286 1.80 316.30 107.0 20.2
4.9 6.0 6740 1.95 294.41 107.7 20.7
5.1 6.2 6440 2.05 282.46 108.0 21.0
5.3 6.4 6197 2.10 272.37 108.3 21.3
5.4 6.5 6135 2.15 270.22 108.3 21.4
5.6 6.8 5804 2.25 256.69 108.7 21.7
6.0 7.2 5457 2.40 242.86 109.0 22.0
6.2 7.5 5207 2.50 232.69 109.2 22.3
6.6 7.9 4917 2.65 221.11 109.4 22.6
6.8 8.3 4679 2.80 211.75 109.6 22.8
7.0 8.5 5450 2.40 206.88 109.0 22.0
CG143-11P-112M-04E 436
8.0 9.7 4752 2.75 180.38 109.6 22.7 186
CF143-11P-112M-04E 454
8.3 10 4582 2.85 173.94 109.7 22.9
3.7 4.5 9387 0.90 392.69 57.3 18.8
3.8 4.6 9132 0.90 382.01 58.4 19.1
3.9 4.8 8788 0.95 368.37 59.8 19.5
4.3 5.2 8078 1.00 339.29 62.5 20.3
4.4 5.3 7879 1.05 331.61 63.2 20.5
4.5 5.5 7582 1.10 319.76 64.2 20.8
4.6 5.6 7462 1.10 314.70 64.5 21.0
5.1 6.1 6765 1.20 286.51 66.6 21.8
CG134-11P-112M-04E 313
5.2 6.4 6510 1.25 276.28 67.3 22.1 184
CF134-11P-112M-04E 315
5.3 6.4 6437 1.25 273.18 67.5 22.1
5.6 6.8 6043 1.35 257.51 68.5 22.6
6.1 7.4 5505 1.50 236.02 69.7 23.2
6.5 7.9 5203 1.55 223.53 70.3 23.6
6.8 8.3 4924 1.65 212.42 70.9 23.9
7.5 9.1 4449 1.80 193.13 71.7 24.4
7.9 9.5 4230 1.90 184.39 72.1 24.7
9.1 11 3602 2.25 159.32 73.0 25.4

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 77

 PN = 4.0 kW IE3
50 Hz 60 Hz at 50 Hz

4.0 kW 4.8 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
7.1 8.6 5397 1.50 204.88 69.9 23.3
8.0 9.7 4767 1.70 180.95 71.1 24.1
9.2 11 4138 1.95 157.08 72.2 24.8
CG133-11P-112M-04E 289
9.6 12 3990 2.05 151.47 72.4 24.9 182
CF133-11P-112M-04E 291
C 11
12
13
15
3575
3060
2.25
2.65
135.71
116.14
73.0
73.7
25.4
26.0
14 17 2683 3.00 101.85 74.1 26.4
6.1 7.3 5742 0.80 239.20 27.4 19.9
6.3 7.6 5525 0.85 230.65 29.1 20.2 CG104-11P-112M-04E 199
180
6.8 8.2 5123 0.90 214.29 32.0 20.7 CF104-11P-112M-04E 203
8.0 9.7 4304 1.05 181.16 36.5 21.7
7.0 8.4 5488 0.85 208.33 29.4 20.2
8.0 9.7 4751 0.95 180.35 34.2 21.2
9.1 11 4208 1.10 159.72 36.9 21.8
10 13 3640 1.25 138.17 39.3 22.6
11 13 3510 1.30 133.24 39.7 22.7
12 14 3214 1.40 122.02 40.7 23.1
CG103-11P-112M-04E 186
14 17 2718 1.70 103.15 42.2 23.7 178
CF103-11P-112M-04E 190
16 20 2352 1.95 89.30 43.0 24.2
17 20 2274 2.00 86.31 43.2 24.3
18 22 2083 2.20 79.08 43.4 24.6
21 26 1802 2.50 68.41 40.9 24.9
22 27 1738 2.60 65.97 40.3 25.0
25 30 1533 2.95 58.21 38.4 25.3
11 13 3588 0.85 136.18 17.7 24.7
12 14 3216 0.95 122.08 21.2 25.2
14 16 2808 1.10 106.60 24.2 25.9
15 18 2587 1.20 98.21 25.5 26.2
17 20 2284 1.35 86.68 27.0 26.6
18 22 2099 1.45 79.66 27.8 26.9
CG093-11P-112M-04E 143
20 24 1916 1.60 72.72 28.5 27.2 174
CF093-11P-112M-04E 141
21 26 1804 1.70 68.48 28.9 27.3
24 29 1614 1.90 61.28 29.5 27.6
28 34 1349 2.25 51.22 30.3 28.0
29 36 1301 2.35 49.39 30.4 28.1
33 40 1148 2.50 43.59 30.7 28.3
40 48 963 2.80 36.57 28.9 28.6
37 44 1043 2.85 39.60 29.7 28.5
CG092-11P-112M-04E 141
64 78 595 2.85 22.58 24.4 28.8 174
CF092-11P-112M-04E 139
72 87 530 2.85 20.10 23.4 28.9
19 24 1963 0.80 74.50 17.3 18.5
20 24 1893 0.85 71.84 17.9 18.6
CG083-11P-112M-04E 91
24 29 1617 1.00 61.37 19.9 19.2 172
CF083-11P-112M-04E 95
29 35 1323 1.20 50.22 21.5 19.8
35 42 1091 1.45 41.43 22.5 20.3
27 32 1427 1.10 54.18 21.0 19.6
34 41 1130 1.40 42.88 22.4 20.2
39 47 986 1.60 37.44 22.9 20.5
44 53 872 1.80 33.09 23.0 20.7
46 56 823 1.40 31.23 22.7 20.5
52 63 737 2.15 27.98 21.6 21.0
59 71 651 1.75 24.72 20.7 20.9
60 73 634 2.35 24.05 20.4 21.2
CG082-11P-112M-04E 90
66 80 581 1.75 22.07 19.9 21.0 172
CF082-11P-112M-04E 94
67 81 569 2.35 21.58 19.7 21.1
69 84 553 2.60 21.00 19.4 21.4
75 91 508 2.35 19.27 19.0 21.2
76 92 503 2.60 19.08 18.8 21.3
81 98 474 2.90 17.99 18.3 21.5
84 101 457 2.95 17.35 18.1 21.6
85 103 449 2.60 17.03 18.1 21.4
101 122 379 2.90 14.40 17.0 21.5

Legend see page 29

78 WG20 Gear Units and Geared Motors www.weg.net

 PN = 4.0 kW IE3
50 Hz 60 Hz at 50 Hz

4.0 kW 4.8 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
41 49 939 0.80 35.63 9.4 12.5
CG073-11P-112M-04E 67
44 53 873 0.85 33.15 10.2 13.0 170
CF073-11P-112M-04E 71
48 58 794 0.90 30.16 10.9 13.0
37 45 1025 0.80 38.92 8.2 12.6
41
47
50
57
933
805
0.90
1.05
35.41
30.55
9.5
10.8
12.5
13.2
C
52 63 732 1.15 27.79 11.3 13.2
62 74 621 1.30 23.58 11.9 13.7
68 82 565 1.40 21.45 12.0 13.7
70 85 544 1.30 20.65 11.2 13.1
74 90 514 1.50 19.50 12.3 14.0
76 92 501 1.30 19.02 11.1 13.2
82 99 467 1.60 17.74 12.2 14.0
87 106 437 1.65 16.59 12.4 14.2
89 108 427 1.60 16.20 11.6 13.6
96 116 398 1.80 15.09 12.3 14.2
97 118 393 1.65 14.93 11.4 13.7
101 122 379 1.85 14.38 12.3 14.4
111 134 345 1.95 13.08 12.2 14.3
CG072-11P-112M-04E 66
116 140 329 1.90 12.51 11.7 14.0 170
CF072-11P-112M-04E 70
119 145 320 2.05 12.14 12.3 14.5
124 150 308 2.10 11.71 12.2 14.5
126 152 303 2.10 11.52 11.5 14.1
131 159 291 2.20 11.04 12.1 14.5
136 165 281 2.25 10.65 12.1 14.5
140 170 272 2.15 10.34 11.6 14.2
145 176 263 2.35 10.00 12.0 14.7
152 184 251 2.50 9.53 11.4 14.3
159 193 240 2.55 9.10 11.8 14.7
165 199 232 2.40 8.80 11.4 14.4
177 214 216 2.70 8.18 11.3 14.8
179 217 214 2.75 8.10 11.2 14.5
190 230 201 2.65 7.63 11.1 14.5
195 236 196 2.90 7.44 10.9 14.8
206 250 185 3.00 7.02 10.8 14.6
225 273 170 2.95 6.44 10.4 14.7

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 79

 PN = 4.0 kW IE3
50 Hz 60 Hz at 50 Hz

4.0 kW 4.8 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
48 58 798 0.80 30.30 4.9 5.8
52 63 732 0.85 27.78 6.4 6.0
62 75 618 1.00 23.46 8.1 6.3
67 82 567 1.10 21.51 8.6 6.4

C 81
86
98
104
470
445
1.30
0.85
17.85
16.88
8.3
8.0
6.7
6.2
89 107 431 1.40 16.36 8.1 6.8
97 117 395 0.85 14.98 7.8 6.4
99 119 388 1.55 14.72 7.9 7.0
107 130 355 1.70 13.49 7.8 7.1
111 134 344 1.10 13.07 7.6 6.7
120 145 318 1.90 12.07 7.6 7.2
125 151 306 1.10 11.60 7.4 6.8
131 159 292 2.10 11.07 7.4 7.2
141 171 270 2.25 10.26 7.3 7.3
146 177 262 1.45 9.94 7.2 7.0
154 187 248 2.40 9.40 7.1 7.4
164 199 233 1.45 8.83 6.9 7.1
172 208 222 2.60 8.43 7.0 7.5
CG062-11P-112M-04E 50
177 214 216 1.75 8.20 6.8 7.2 168
CF062-11P-112M-04E 55
178 216 214 2.65 8.13 6.9 7.5
188 227 204 2.55 7.73 6.8 7.5
194 235 196 2.60 7.46 6.7 7.5
199 241 192 1.75 7.28 6.6 7.3
216 261 177 2.15 6.73 6.5 7.4
217 262 176 2.75 6.69 6.5 7.6
236 286 162 2.75 6.13 6.4 7.6
243 294 157 2.15 5.97 6.3 7.4
254 307 151 2.55 5.71 6.2 7.5
256 310 149 2.85 5.66 6.2 7.7
279 338 137 2.90 5.19 6.1 7.7
286 346 134 2.55 5.07 6.0 7.5
309 374 124 2.80 4.70 5.9 7.6
320 387 119 2.80 4.53 5.8 7.6
348 421 110 2.75 4.17 5.7 7.6
361 436 106 2.80 4.02 5.6 7.6
389 471 98 2.90 3.73 5.5 7.7
438 531 87 2.90 3.31 5.3 7.7
460 556 83 3.00 3.15 5.2 7.8

Legend see page 29

80 WG20 Gear Units and Geared Motors www.weg.net

 PN = 4.0 kW IE3
50 Hz 60 Hz at 50 Hz

4.0 kW 4.8 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
78 95 489 0.85 18.56 2.7 5.9
86 104 445 0.90 16.88 4.0 6.0
103 125 369 1.10 14.03 5.5 6.4
114 138 336 1.20 12.75 5.6 6.6
126
129
153
156
302
296
1.35
0.95
11.48
11.25
5.5
5.4
6.7
6.4
C
139 168 275 1.50 10.43 5.4 6.8
148 179 258 0.90 9.79 5.2 6.6
156 189 245 1.65 9.31 5.3 7.0
171 206 224 1.20 8.50 5.1 6.8
186 225 205 1.95 7.79 5.1 7.2
196 237 195 1.20 7.40 5.0 6.9
205 248 187 1.80 7.08 5.0 7.2
208 252 183 1.50 6.96 4.9 7.0
230 278 166 2.05 6.31 4.9 7.3
CG052-11P-112M-04E 45
238 288 160 2.05 6.09 4.8 7.4 166
CF052-11P-112M-04E 50
240 290 159 1.50 6.05 4.7 7.2
253 306 151 1.95 5.74 4.8 7.4
257 311 149 1.80 5.64 4.7 7.2
262 317 146 1.95 5.54 4.7 7.4
295 358 129 1.80 4.91 4.5 7.3
303 367 126 2.00 4.78 4.6 7.5
307 372 124 2.10 4.72 4.5 7.4
333 404 115 2.10 4.35 4.4 7.6
353 427 108 1.90 4.11 4.3 7.5
379 459 101 2.10 3.83 4.3 7.5
393 476 97 2.10 3.69 4.2 7.5
435 527 88 2.00 3.33 4.1 7.6
452 547 85 2.00 3.21 4.1 7.6
500 605 76 2.05 2.90 4.0 7.7
575 696 66 2.15 2.52 3.8 7.7

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 81

 PN = 5.5 kW IE3
50 Hz 60 Hz at 50 Hz

5.5 kW 6.6 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
2.1 2.5 22834 0.80 698.99 96.5 19.8
2.2 2.6 21858 0.85 670.48 100.5 20.6
2.4 2.9 19629 0.95 604.60 108.4 22.7
2.5 3.0 19213 0.95 591.77 109.7 23.0

C 2.8
2.9
3.4
3.5
16714
16446
1.10
1.10
517.99
509.69
116.8
117.4
25.3
25.6
CG164-11P-132S-04E 729
3.0 3.6 15985 1.15 496.41 118.6 26.0 192
CF164-11P-132S-04E 752
3.3 4.0 14109 1.30 440.86 122.7 27.7
3.4 4.1 13655 1.35 427.56 123.6 28.1
3.5 4.2 13360 1.35 418.32 124.2 28.4
4.0 4.8 11714 1.55 369.82 127.1 29.9
4.1 4.9 11389 1.60 360.30 127.7 30.2
4.7 5.7 9750 1.85 311.64 130.1 31.6
2.8 3.3 17213 0.80 526.92 84.4 10.2
3.2 3.9 14762 0.90 453.75 92.3 12.7
3.3 3.9 14581 0.90 448.20 92.8 12.9
3.4 4.0 14180 0.95 436.75 93.9 13.3
3.5 4.2 13645 1.00 421.15 95.3 13.8
3.8 4.5 12560 1.05 388.44 97.9 14.9
4.0 4.8 11849 1.10 367.20 99.5 15.6
4.1 4.9 11586 1.15 359.79 100.1 15.9
4.4 5.3 10727 1.25 334.50 101.8 16.7
4.5 5.4 10519 1.25 328.01 102.1 17.0
4.6 5.6 10123 1.30 316.30 102.9 17.4
CG144-11P-132S-04E 478
4.7 5.6 10040 1.30 313.70 103.0 17.4 188
CF144-11P-132S-04E 496
5.0 6.0 9383 1.40 294.41 104.1 18.1
5.2 6.2 8984 1.45 282.46 104.7 18.5
5.4 6.5 8628 1.55 272.37 105.3 18.9
5.7 6.9 8097 1.65 256.69 106.0 19.4
6.0 7.3 7629 1.75 242.86 106.6 19.9
6.3 7.6 7295 1.80 232.69 107.0 20.2
6.6 8.0 6903 1.90 221.11 107.5 20.6
6.9 8.3 6584 2.00 211.75 107.9 20.9
7.7 9.3 5859 2.25 190.40 108.6 21.6
8.0 9.7 5589 2.35 182.40 108.9 21.9
9.3 11 4733 2.75 157.07 109.6 22.8
7.1 8.5 7417 1.80 206.88 106.9 20.1
8.1 9.8 6467 2.05 180.38 108.0 21.0
CG143-11P-132S-04E 454
8.4 10 6236 2.10 173.94 108.2 21.2 186
CF143-11P-132S-04E 472
9.4 11 5571 2.35 155.38 108.9 21.9
11 13 4797 2.75 133.80 109.5 22.7
4.6 5.5 10446 0.80 319.76 52.1 17.6
4.7 5.6 10280 0.80 314.70 53.0 17.8
5.1 6.2 9321 0.90 286.51 57.6 18.9
5.3 6.4 8988 0.90 276.28 59.0 19.2
5.4 6.5 8869 0.95 273.18 59.5 19.4
5.7 6.9 8343 1.00 257.51 61.5 20.0 CG134-11P-132S-04E 331
184
6.2 7.5 7632 1.05 236.02 64.0 20.8 CF134-11P-132S-04E 333
6.6 7.9 7198 1.15 223.53 65.3 21.3
6.9 8.3 6826 1.20 212.42 66.4 21.7
7.6 9.1 6181 1.30 193.13 68.1 22.4
7.9 9.6 5877 1.40 184.39 68.8 22.8
9.2 11 5036 1.60 159.32 70.6 23.7
7.2 8.6 7345 1.10 204.88 64.9 21.1
8.1 9.8 6488 1.25 180.95 67.3 22.1
9.3 11 5632 1.45 157.08 69.4 23.1
9.7 12 5431 1.50 151.47 69.8 23.3
11 13 4866 1.65 135.71 71.0 23.9 CG133-11P-132S-04E 307
182
13 15 4164 1.95 116.14 72.2 24.7 CF133-11P-132S-04E 309
14 17 3652 2.20 101.85 72.9 25.3
15 18 3596 2.25 100.31 73.0 25.4
16 20 3225 2.50 89.96 73.5 25.8
19 23 2800 2.90 78.09 73.9 26.3

82 WG20 Gear Units and Geared Motors www.weg.net

 PN = 5.5 kW IE3
50 Hz 60 Hz at 50 Hz

5.5 kW 6.6 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
8.1 9.7 5918 0.80 181.16 25.9 19.7 CG104-11P-132S-04E 217
180
CF104-11P-132S-04E 221
9.2 11 5727 0.80 159.72 27.5 19.9
11 13 4954 0.95 138.17 33.0 20.9
12
14
14
17
4375
3698
1.05
1.25
122.02
103.15
36.1
39.1
21.6
22.5
C
15 18 3587 1.30 100.05 39.5 22.6
16 20 3202 1.45 89.30 40.8 23.1
CG103-11P-132S-04E 204
17 20 3094 1.50 86.31 41.1 23.3 178
CF103-11P-132S-04E 208
19 22 2835 1.60 79.08 41.9 23.6
21 26 2453 1.85 68.41 41.9 24.1
22 27 2365 1.95 65.97 41.2 24.2
25 30 2087 2.20 58.21 39.2 24.5
30 36 1776 2.55 49.54 36.6 24.9
34 41 1532 2.95 42.74 34.9 25.3
14 17 3822 0.80 106.60 14.8 24.4
15 18 3521 0.90 98.21 18.4 24.8
16 19 3378 0.90 94.21 19.8 25.0
17 20 3108 1.00 86.68 22.1 25.4
18 22 2856 1.10 79.66 23.9 25.8
20 24 2607 1.20 72.72 25.4 26.1
21 26 2455 1.25 68.48 26.2 26.4 CG093-11P-132S-04E 162
174
24 29 2197 1.40 61.28 27.4 26.8 CF093-11P-132S-04E 160
25 30 2143 1.40 59.78 27.7 26.8
29 34 1836 1.65 51.22 28.8 27.3
30 36 1771 1.70 49.39 29.1 27.4
34 40 1563 1.85 43.59 29.7 27.7
40 48 1311 2.05 36.57 29.5 28.1
48 57 1105 2.30 30.81 27.5 28.4
37 45 1420 2.10 39.60 30.1 27.9
44 53 1200 2.50 33.48 28.4 28.2
51 61 1039 2.90 28.98 26.9 28.5
65 78 810 2.10 22.58 24.7 28.4
CG092-11P-132S-04E 160
73 88 721 2.10 20.10 23.7 28.5 174
CF092-11P-132S-04E 158
77 92 684 2.50 19.09 23.2 28.6
86 104 609 2.50 16.99 22.3 28.7
89 107 593 2.90 16.53 22.0 28.8
100 120 527 2.90 14.71 21.1 28.9
29 35 1801 0.90 50.22 18.6 18.8 CG083-11P-132S-04E 109
172
35 43 1485 1.05 41.43 20.7 19.5 CF083-11P-132S-04E 113

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 83

 PN = 5.5 kW IE3
50 Hz 60 Hz at 50 Hz

5.5 kW 6.6 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
27 33 1942 0.80 54.18 17.5 18.5
34 41 1537 1.05 42.88 20.4 19.4
39 47 1342 1.20 37.44 21.4 19.8
44 53 1186 1.35 33.09 22.2 20.1

C 47
52
57
63
1120
1003
1.00
1.55
31.23
27.98
22.4
22.1
19.7
20.5
53 63 1000 1.00 27.88 22.2 20.0
59 71 886 1.30 24.72 21.2 20.3
61 73 862 1.75 24.05 20.8 20.7
66 80 791 1.30 22.07 20.3 20.5
68 82 774 1.75 21.58 20.1 20.6
70 84 753 1.90 21.00 19.7 21.0
76 92 691 1.75 19.27 19.3 20.7
77 93 684 1.95 19.08 19.1 20.8 CG082-11P-132S-04E 108
172
81 98 645 2.10 17.99 18.6 21.2 CF082-11P-132S-04E 112
84 102 622 2.20 17.35 18.4 21.2
86 104 611 1.90 17.03 18.4 20.9
91 109 578 2.25 16.13 18.0 21.1
96 115 549 2.35 15.31 17.5 21.4
102 123 516 2.15 14.40 17.2 21.2
106 127 497 2.50 13.87 17.0 21.3
114 137 460 2.65 12.84 16.4 21.6
118 143 444 2.35 12.38 16.3 21.4
121 146 434 2.75 12.10 16.1 21.4
135 163 388 3.00 10.82 15.4 21.7
136 163 387 2.55 10.81 15.5 21.5
158 191 332 2.80 9.26 14.6 21.7
164 198 320 2.85 8.93 14.5 21.7
53 64 996 0.85 27.79 7.1 12.4
62 75 845 0.95 23.58 8.5 13.1
68 82 769 1.05 21.45 8.8 13.0
71 85 740 0.95 20.65 7.8 12.3
75 91 699 1.10 19.50 9.4 13.5
77 93 682 0.95 19.02 7.9 12.4
83 99 636 1.20 17.74 9.5 13.5
88 106 595 1.25 16.59 9.9 13.8
90 109 581 1.20 16.20 9.0 12.9
97 117 541 1.30 15.09 10.0 13.7
98 118 535 1.20 14.93 8.9 13.1
102 123 515 1.35 14.38 10.2 14.0
112 135 469 1.45 13.08 10.3 14.0
117 141 448 1.40 12.51 9.6 13.5
121 145 435 1.55 12.14 10.4 14.2
125 151 420 1.55 11.71 10.5 14.2
127 153 413 1.55 11.52 9.5 13.6
133 160 396 1.65 11.04 10.4 14.2
138 166 382 1.70 10.65 10.4 14.2 CG072-11P-132S-04E 84
170
142 171 371 1.60 10.34 9.9 13.8 CF072-11P-132S-04E 88
147 177 359 1.75 10.00 10.5 14.4
154 185 342 1.85 9.53 9.7 13.9
161 194 326 1.85 9.10 10.5 14.4
167 201 315 1.75 8.80 10.0 14.1
179 216 293 2.00 8.18 10.5 14.6
181 218 291 2.00 8.10 9.8 14.1
192 231 273 1.95 7.63 10.0 14.2
197 237 267 2.15 7.44 10.4 14.6
209 251 252 2.20 7.02 9.8 14.3
217 261 242 2.30 6.75 10.3 14.7
228 274 231 2.20 6.44 9.9 14.4
236 284 223 2.25 6.21 9.9 14.5
239 287 220 2.45 6.14 10.2 14.7
247 298 213 2.40 5.93 9.7 14.5
256 309 205 2.45 5.72 9.7 14.5
276 333 190 2.50 5.30 9.7 14.6
300 361 175 2.70 4.89 9.5 14.6
338 407 156 2.85 4.34 9.1 14.7
PN = 5.5 kW IE3
50 Hz 60 Hz at 50 Hz

5.5 kW 6.6 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
68 82 771 0.80 21.51 5.6 5.8
82 99 640 0.95 17.85 7.7 6.2
90 108 587 1.05 16.36 7.5 6.4
100 120 528 1.15 14.72 7.4 6.6
109
112
131
135
484
469
1.25
0.85
13.49
13.07
7.3
7.1
6.7
6.1
C
121 146 433 1.40 12.07 7.2 6.8
126 152 416 0.85 11.60 6.9 6.3
132 159 397 1.55 11.07 7.1 6.9
143 172 368 1.65 10.26 6.9 7.0
147 178 356 1.10 9.94 6.8 6.6
156 188 337 1.80 9.40 6.8 7.1
166 200 316 1.10 8.83 6.6 6.7
174 209 302 1.95 8.43 6.7 7.2
179 215 294 1.30 8.20 6.5 6.9
180 217 292 1.95 8.13 6.6 7.3
189 228 277 1.90 7.73 6.5 7.3
CG062-11P-132S-04E 69
196 237 267 1.90 7.46 6.5 7.3 168
CF062-11P-132S-04E 74
201 243 261 1.30 7.28 6.3 7.0
218 262 241 1.60 6.73 6.2 7.1
219 264 240 2.05 6.69 6.3 7.4
239 288 220 2.05 6.13 6.2 7.5
245 296 214 1.60 5.97 6.0 7.2
256 309 205 1.85 5.71 6.0 7.2
259 312 203 2.10 5.66 6.0 7.5
282 340 186 2.15 5.19 5.9 7.6
289 348 182 1.85 5.07 5.8 7.3
312 376 168 2.05 4.70 5.7 7.4
323 390 162 2.05 4.53 5.6 7.4
351 423 150 2.05 4.17 5.5 7.5
364 439 144 2.05 4.02 5.4 7.5
393 474 134 2.15 3.73 5.4 7.5
443 534 119 2.15 3.31 5.2 7.6
464 560 113 2.25 3.15 5.1 7.6
523 630 100 2.25 2.80 4.9 7.7
104 126 503 0.80 14.03 2.1 5.8
115 138 457 0.90 12.75 3.7 6.0
128 154 412 1.00 11.48 4.8 6.2
140 169 374 1.10 10.43 5.0 6.4
157 190 334 1.20 9.31 4.9 6.6
172 208 305 0.90 8.50 4.7 6.3
173 209 303 1.25 8.46 4.8 6.7
188 227 279 1.45 7.79 4.8 6.8
198 239 265 0.90 7.40 4.6 6.5
207 249 254 1.35 7.08 4.7 6.9
211 254 249 1.10 6.96 4.6 6.7
232 280 226 1.50 6.31 4.6 7.1
241 290 218 1.50 6.09 4.6 7.1
242 292 217 1.10 6.05 4.4 6.8 CG052-11P-132S-04E 63
166
255 307 206 1.40 5.74 4.5 7.2 CF052-11P-132S-04E 68
260 313 202 1.35 5.64 4.4 6.9
265 319 198 1.45 5.54 4.5 7.2
299 360 176 1.35 4.91 4.3 7.1
306 369 171 1.45 4.78 4.4 7.3
310 374 169 1.55 4.72 4.3 7.1
337 406 156 1.55 4.35 4.2 7.4
357 430 147 1.40 4.11 4.1 7.2
383 461 137 1.55 3.83 4.1 7.3
397 478 132 1.55 3.69 4.0 7.3
440 530 119 1.50 3.33 3.9 7.4
456 550 115 1.50 3.21 3.9 7.4
505 609 104 1.50 2.90 3.8 7.5
581 700 90 1.55 2.52 3.7 7.6

www.weg.net WG20 Gear Units and Geared Motors 85

 PN = 7.5 kW IE3
50 Hz 60 Hz at 50 Hz

7.5 kW 9.0 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
2.8 3.4 23074 0.80 517.99 95.5 19.5
2.9 3.5 22704 0.80 509.69 97.1 19.9
3.0 3.6 22068 0.85 496.41 99.6 20.4
3.3 4.0 19518 0.95 440.86 108.7 22.8

C
CG164-11P-L132M-04F 743
3.4 4.1 18890 1.00 427.56 110.7 23.3 192
CF164-11P-L132M-04F 766
3.5 4.2 18482 1.00 418.32 111.9 23.7
4.0 4.8 16239 1.15 369.82 117.9 25.7
4.1 4.9 15821 1.15 360.30 119.0 26.1
4.7 5.7 13572 1.35 311.64 123.8 28.2
3.8 4.6 17193 0.80 385.96 84.5 10.3
4.0 4.8 16357 0.80 367.20 87.4 11.1
4.1 4.9 15994 0.85 359.79 88.6 11.5
4.4 5.3 14839 0.90 334.50 92.1 12.6
4.5 5.4 14552 0.90 328.01 92.9 12.9
4.6 5.6 14003 0.95 316.30 94.4 13.5
4.7 5.6 13889 0.95 313.70 94.7 13.6
5.0 6.0 13007 1.00 294.41 96.9 14.5
5.2 6.3 12454 1.05 282.46 98.2 15.0 CG144-11P-L132M-04F 492
188
5.4 6.5 11985 1.10 272.37 99.2 15.5 CF144-11P-L132M-04F 510
5.7 6.9 11248 1.20 256.69 100.7 16.2
6.0 7.3 10620 1.25 242.86 102.0 16.9
6.3 7.6 10155 1.30 232.69 102.8 17.3
6.6 8.0 9610 1.40 221.11 103.7 17.9
6.9 8.4 9184 1.45 211.75 104.4 18.3
7.7 9.3 8207 1.60 190.40 105.9 19.3
8.0 9.7 7830 1.70 182.40 106.4 19.7
9.3 11 6673 1.95 157.07 107.8 20.8
7.1 8.6 10115 1.30 206.88 102.9 17.4
8.1 9.8 8819 1.50 180.38 105.0 18.7
8.4 10 8504 1.55 173.94 105.4 19.0
CG143-11P-L132M-04F 468
9.4 11 7596 1.75 155.38 106.7 19.9 186
CF143-11P-L132M-04F 486
11 13 6541 2.00 133.80 107.9 20.9
13 15 5714 2.30 116.88 108.7 21.8
15 18 4828 2.70 98.76 109.5 22.7
6.2 7.5 10514 0.80 236.02 51.7 17.5
6.6 7.9 9937 0.85 223.53 54.7 18.1
6.9 8.3 9443 0.85 212.42 57.0 18.7 CG134-11P-L132M-04F 345
184
7.6 9.2 8550 0.95 193.13 60.7 19.7 CF134-11P-L132M-04F 347
7.9 9.6 8147 1.00 184.39 62.2 20.2
9.2 11 6996 1.15 159.32 65.9 21.5
7.2 8.6 10017 0.80 204.88 54.3 18.1
8.1 9.8 8847 0.95 180.95 59.6 19.4
9.3 11 7680 1.05 157.08 63.8 20.7
9.7 12 7405 1.10 151.47 64.7 21.0
11 13 6635 1.25 135.71 66.9 21.9
13 15 5678 1.45 116.14 69.3 23.0 CG133-11P-L132M-04F 321
182
14 17 4980 1.65 101.85 70.7 23.8 CF133-11P-L132M-04F 323
15 18 4904 1.65 100.31 70.9 23.9
16 20 4398 1.85 89.96 71.8 24.5
19 23 3818 2.10 78.09 72.7 25.1
22 26 3299 2.45 67.47 73.4 25.7
25 31 2823 2.85 57.74 73.9 26.3
49 59 1460 2.50 29.86 75.0 27.8 CG132-11P-L132M-04F 312
182
86 104 831 2.50 17.00 75.2 28.3 CF132-11P-L132M-04F 314

Legend see page 29

86 WG20 Gear Units and Geared Motors www.weg.net

 PN = 7.5 kW IE3
50 Hz 60 Hz at 50 Hz

7.5 kW 9.0 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
12 15 5965 0.80 122.02 25.4 19.6
14 17 5043 0.90 103.15 32.5 20.8
15 18 4891 0.95 100.05 33.4 21.0
16 20 4366 1.05 89.30 36.2 21.6
17
19
21
22
4220
3867
1.10
1.20
86.31
79.08
36.9
38.4
21.8
22.3
CG103-11P-L132M-04F 218
178
C
CF103-11P-L132M-04F 222
21 26 3345 1.35 68.41 40.3 22.9
22 27 3225 1.40 65.97 40.7 23.1
25 30 2846 1.60 58.21 40.3 23.6
30 36 2422 1.90 49.54 37.6 24.1
34 41 2089 2.20 42.74 35.7 24.5
44 54 1614 2.30 33.01 32.3 25.1
60 73 1193 2.50 24.40 28.7 25.7
76 92 937 2.30 19.17 26.5 25.6 CG102-11P-L132M-04F 213
178
85 103 838 2.30 17.15 25.4 25.7 CF102-11P-L132M-04F 217
103 125 693 2.50 14.17 23.7 26.0
116 140 620 2.50 12.68 22.7 26.1
18 22 3895 0.80 79.66 13.7 24.2
20 24 3555 0.85 72.72 18.0 24.7
21 26 3348 0.90 68.48 20.1 25.1
24 29 2996 1.05 61.28 22.9 25.6
25 30 2923 1.05 59.78 23.4 25.7 CG093-11P-L132M-04F 176
174
29 35 2504 1.20 51.22 25.9 26.3 CF093-11P-L132M-04F 174
30 36 2415 1.25 49.39 26.4 26.4
34 41 2131 1.35 43.59 27.7 26.9
40 48 1788 1.50 36.57 29.0 27.4
48 57 1507 1.70 30.81 28.2 27.8
37 45 1936 1.55 39.60 28.5 27.1
44 53 1637 1.85 33.48 29.2 27.6
51 61 1417 2.15 28.98 27.6 27.9
57 69 1255 2.40 25.67 26.4 28.1
65 78 1104 1.55 22.58 25.3 27.8
66 80 1086 2.80 22.20 24.9 28.4
68 83 1047 2.50 21.41 24.6 28.5
73 88 983 1.55 20.10 24.2 28.0
CG092-11P-L132M-04F 174
77 93 933 1.85 19.09 23.7 28.1 174
CF092-11P-L132M-04F 172
86 104 831 1.85 16.99 22.7 28.3
89 107 808 2.15 16.53 22.4 28.4
100 120 719 2.15 14.71 21.5 28.5
112 136 637 2.55 13.03 20.6 28.7
116 140 619 2.95 12.66 20.3 28.8
120 145 597 2.50 12.21 20.0 28.8
130 157 551 2.95 11.27 19.5 28.9
135 163 531 2.50 10.87 19.2 28.9
35 43 2025 0.80 41.43 16.7 18.4 CG083-11P-L132M-04F 123
172
CF083-11P-L132M-04F 127

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 87

 PN = 7.5 kW IE3
50 Hz 60 Hz at 50 Hz

7.5 kW 9.0 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
39 47 1830 0.85 37.44 18.4 18.8
44 53 1618 1.00 33.09 19.9 19.2
52 63 1368 1.15 27.98 21.3 19.7
59 72 1209 0.95 24.72 21.9 19.5

C 61
66
74
80
1176
1079
1.30
0.95
24.05
22.07
21.4
21.0
20.1
19.8
68 82 1055 1.25 21.58 20.7 19.9
70 84 1027 1.40 21.00 20.2 20.4
76 92 942 1.25 19.27 19.8 20.1
77 93 933 1.45 19.08 19.7 20.2
81 98 880 1.55 17.99 19.1 20.7
84 102 848 1.60 17.35 18.8 20.8
86 104 833 1.40 17.03 18.9 20.4
91 110 789 1.65 16.13 18.4 20.5
96 116 749 1.75 15.31 17.9 21.0
CG082-11P-L132M-04F 122
102 123 704 1.55 14.40 17.6 20.7 172
CF082-11P-L132M-04F 126
106 128 678 1.85 13.87 17.3 20.8
114 138 628 1.95 12.84 16.7 21.2
118 143 605 1.70 12.38 16.7 21.0
121 146 592 2.00 12.10 16.5 21.0
135 164 529 2.20 10.82 15.7 21.4
136 164 528 1.85 10.81 15.8 21.2
141 171 507 2.25 10.37 15.5 21.2
147 177 489 2.30 10.00 15.3 21.3
158 191 453 2.05 9.26 14.9 21.3
164 198 437 2.10 8.93 14.7 21.4
166 201 432 2.45 8.83 14.6 21.4
186 225 385 2.25 7.88 14.0 21.5
198 239 362 2.80 7.40 13.7 21.6
222 268 323 2.50 6.61 13.1 21.7
263 318 272 2.80 5.57 12.3 21.8

Legend see page 29

88 WG20 Gear Units and Geared Motors www.weg.net

 PN = 7.5 kW IE3
50 Hz 60 Hz at 50 Hz

7.5 kW 9.0 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
75 91 953 0.80 19.50 5.5 12.8
83 100 867 0.85 17.74 6.0 12.7
88 107 811 0.90 16.59 6.6 13.2
90 109 792 0.85 16.20 5.4 12.0
97
98
117
119
738
730
0.95
0.90
15.09
14.93
7.0
5.5
13.1
12.2
C
102 123 703 1.00 14.38 7.4 13.5
112 135 639 1.05 13.08 7.7 13.4
117 142 611 1.05 12.51 6.9 12.8
121 146 593 1.15 12.14 8.0 13.8
125 151 572 1.15 11.71 8.2 13.8
127 154 563 1.15 11.52 6.9 12.9
133 160 540 1.20 11.04 8.2 13.7
138 166 521 1.25 10.65 8.3 13.8
142 171 506 1.20 10.34 7.6 13.3
147 177 489 1.30 10.00 8.5 14.0
154 186 466 1.35 9.53 7.6 13.4
161 195 445 1.35 9.10 8.7 14.0 CG072-11P-L132M-04F 98
170
167 201 430 1.30 8.80 8.0 13.6 CF072-11P-L132M-04F 102
179 216 400 1.45 8.18 8.9 14.3
181 218 396 1.50 8.10 8.0 13.7
192 232 373 1.45 7.63 8.3 13.8
197 238 364 1.55 7.44 8.9 14.3
209 252 343 1.60 7.02 8.2 13.9
217 262 330 1.70 6.75 9.0 14.5
228 275 315 1.60 6.44 8.5 14.1
236 285 304 1.65 6.21 8.5 14.1
239 288 300 1.80 6.14 9.0 14.5
247 298 290 1.80 5.93 8.3 14.1
256 309 280 1.80 5.72 8.4 14.2
276 334 259 1.85 5.30 8.5 14.3
300 362 239 2.00 4.89 8.4 14.4
338 408 212 2.10 4.34 8.5 14.5
366 443 195 2.25 4.00 8.4 14.5
409 494 175 2.40 3.58 8.4 14.7
444 537 161 2.50 3.30 8.2 14.7

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 89

 PN = 7.5 kW IE3
50 Hz 60 Hz at 50 Hz

7.5 kW 9.0 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
100 120 719 0.85 14.72 6.6 6.0
109 131 660 0.95 13.49 6.7 6.2
121 147 590 1.05 12.07 6.7 6.4
132 160 541 1.15 11.07 6.6 6.5

C 143
147
173
178
501
486
1.20
0.80
10.26
9.94
6.5
6.3
6.6
6.1
156 188 460 1.30 9.40 6.4 6.8
166 201 432 0.80 8.83 6.1 6.3
174 210 412 1.40 8.43 6.3 6.9
179 216 401 0.95 8.20 6.1 6.4
180 218 398 1.45 8.13 6.2 6.9
189 229 378 1.40 7.73 6.2 7.0
196 237 365 1.40 7.46 6.1 7.0
201 243 356 0.95 7.28 5.9 6.6
218 263 329 1.15 6.73 5.9 6.7 CG062-11P-L132M-04F 82
168
219 265 327 1.50 6.69 6.0 7.2 CF062-11P-L132M-04F 87
239 289 300 1.50 6.13 5.9 7.2
245 296 292 1.15 5.97 5.7 6.8
256 310 279 1.35 5.71 5.7 6.9
259 313 277 1.55 5.66 5.8 7.3
282 341 254 1.55 5.19 5.7 7.4
289 349 248 1.40 5.07 5.5 7.0
312 377 230 1.50 4.70 5.5 7.1
323 391 222 1.50 4.53 5.4 7.2
351 424 204 1.50 4.17 5.3 7.2
364 440 197 1.50 4.02 5.2 7.3
393 475 182 1.60 3.73 5.2 7.3
443 535 162 1.60 3.31 5.0 7.4
464 561 154 1.65 3.15 5.0 7.5
523 632 137 1.65 2.80 4.8 7.5
140 170 510 0.80 10.43 1.6 5.7
157 190 455 0.85 9.31 3.8 6.0
173 209 414 0.90 8.46 4.3 6.2
188 227 381 0.95 7.79 4.3 6.4
207 250 346 0.95 7.08 4.3 6.5
211 254 340 0.80 6.96 4.2 6.1
232 280 309 1.00 6.31 4.3 6.7
241 291 298 1.05 6.09 4.2 6.7
242 292 296 0.80 6.05 4.1 6.3
255 308 281 1.05 5.74 4.2 6.8
260 314 276 1.00 5.64 4.1 6.5
CG052-11P-L132M-04F 77
265 320 271 1.05 5.54 4.2 6.9 166
CF052-11P-L132M-04F 82
299 361 240 1.00 4.91 4.0 6.7
306 370 234 1.10 4.78 4.1 7.0
310 375 231 1.15 4.72 4.0 6.8
337 407 213 1.15 4.35 4.0 7.1
357 431 201 1.05 4.11 3.9 6.9
383 462 187 1.15 3.83 3.8 7.0
397 480 180 1.15 3.69 3.8 7.1
440 532 163 1.10 3.33 3.7 7.1
456 551 157 1.10 3.21 3.7 7.2
505 611 142 1.10 2.90 3.6 7.3
581 702 123 1.15 2.52 3.5 7.4

Legend see page 29

90 WG20 Gear Units and Geared Motors www.weg.net

PN = 9.2 kW IE3
50 Hz 60 Hz at 50 Hz

9.2 kW 11 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
3.4 4.1 23443 0.80 427.56 93.9 19.2
3.5 4.2 22936 0.80 418.32 96.1 19.7
CG164-11P-L132M-04G 748
3.9 4.8 20194 0.90 369.82 106.5 22.2 192
CF164-11P-L132M-04G 771
4.1 4.9 19634 0.95 360.30 108.3 22.7
4.7
4.7
5.7
5.6
16878
17200
1.10
0.80
311.64
313.70
116.3
84.4
25.2
10.3
C
5.0 6.0 16109 0.85 294.41 88.2 11.4
5.2 6.2 15456 0.85 282.46 90.3 12.0
5.4 6.5 14873 0.90 272.37 92.0 12.6
5.7 6.9 13988 0.95 256.69 94.4 13.5
6.0 7.3 13207 1.00 242.86 96.4 14.3 CG144-11P-L132M-04G 497
188
6.3 7.6 12628 1.05 232.69 97.8 14.8 CF144-11P-L132M-04G 515
6.6 8.0 11975 1.10 221.11 99.2 15.5
6.9 8.3 11445 1.15 211.75 100.4 16.0
7.7 9.3 10228 1.30 190.40 102.7 17.2
8.0 9.7 9777 1.35 182.40 103.4 17.7
9.3 11 8333 1.60 157.07 105.7 19.1
7.1 8.5 12450 1.05 206.88 98.2 15.0
8.1 9.8 10855 1.20 180.38 101.5 16.6
8.4 10 10467 1.25 173.94 102.2 17.0
9.4 11 9350 1.40 155.38 104.2 18.1
11 13 8052 1.65 133.80 106.1 19.4 CG143-11P-L132M-04G 473
186
12 15 7033 1.85 116.88 107.4 20.5 CF143-11P-L132M-04G 491
13 16 6816 1.95 113.27 107.6 20.7
15 18 5943 2.20 98.76 108.5 21.5
17 21 5119 2.55 85.07 109.3 22.4
20 24 4408 2.95 73.25 109.8 23.1
7.6 9.1 10589 0.80 193.13 51.3 17.4
CG134-11P-L132M-04G 350
7.9 9.6 10110 0.80 184.39 53.8 18.0 184
CF134-11P-L132M-04G 352
9.2 11 8682 0.95 159.32 60.2 19.6
9.3 11 9453 0.85 157.08 57.0 18.7
9.6 12 9115 0.90 151.47 58.5 19.1
11 13 8167 1.00 135.71 62.2 20.2
13 15 6989 1.15 116.14 66.0 21.5
14 17 6129 1.35 101.85 68.2 22.5
CG133-11P-L132M-04G 326
15 18 6036 1.35 100.31 68.5 22.6 182
CF133-11P-L132M-04G 328
16 20 5414 1.50 89.96 69.9 23.3
19 23 4699 1.75 78.09 71.3 24.1
22 26 4060 2.00 67.47 72.3 24.9
25 31 3475 2.35 57.74 73.2 25.5
29 35 3001 2.70 49.87 73.7 26.1
41 50 2137 2.50 35.51 74.5 27.1
49 59 1797 2.00 29.86 74.8 27.4 CG132-11P-L132M-04G 317
178
72 87 1217 2.50 20.22 75.1 27.8 CF132-11P-L132M-04G 319
86 104 1023 2.00 17.00 75.2 28.1
16 20 5374 0.85 89.30 30.3 20.4
17 20 5194 0.90 86.31 31.5 20.6
18 22 4759 0.95 79.08 34.1 21.1
21 26 4117 1.10 68.41 37.3 22.0 CG103-11P-L132M-04G 223
178
22 27 3970 1.15 65.97 38.0 22.2 CF103-11P-L132M-04G 227
25 30 3503 1.30 58.21 39.8 22.7
29 36 2981 1.55 49.54 38.8 23.4
34 41 2572 1.75 42.74 36.4 23.9
44 53 1986 1.90 33.01 32.8 24.7
50 61 1755 2.60 29.16 31.3 25.0
58 70 1523 3.00 25.31 29.5 25.3
60 72 1469 2.00 24.40 29.1 25.3
76 92 1153 1.90 19.17 26.8 25.2 CG102-11P-L132M-04G 218
178
85 103 1032 1.90 17.15 25.8 25.4 CF102-11P-L132M-04G 222
86 104 1019 2.65 16.93 25.6 25.4
96 117 911 2.65 15.15 24.6 25.6
103 125 853 2.00 14.17 23.9 25.7
115 139 763 2.00 12.68 23.0 25.8

www.weg.net WG20 Gear Units and Geared Motors 91

 PN = 9.2 kW IE3
50 Hz 60 Hz at 50 Hz

9.2 kW 11 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
24 29 3688 0.85 61.28 16.5 24.6
29 34 3082 1.00 51.22 22.3 25.4
30 36 2972 1.05 49.39 23.1 25.6 CG093-11P-L132M-04G 181
174
33 40 2623 1.10 43.59 25.3 26.1 CF093-11P-L132M-04G 179

C 40
47
48
57
2200
1854
1.25
1.40
36.57
30.81
27.4
28.8
26.7
27.3
37 45 2383 1.25 39.60 26.6 26.5
44 53 2015 1.50 33.48 28.2 27.0
50 61 1744 1.75 28.98 28.3 27.4
57 69 1545 1.95 25.67 26.9 27.7
65 78 1359 1.25 22.58 25.8 27.3
66 79 1336 2.25 22.20 25.3 28.0
68 82 1288 2.00 21.41 25.0 28.1
73 88 1210 1.25 20.10 24.7 27.5
76 92 1149 1.50 19.09 24.2 27.7
77 93 1137 2.65 18.89 23.8 28.3
CG092-11P-L132M-04G 179
86 104 1023 1.50 16.99 23.1 27.9 174
CF092-11P-L132M-04G 177
88 107 995 1.75 16.53 22.8 28.0
99 120 885 1.75 14.71 21.9 28.2
100 121 881 2.10 14.64 21.7 28.2
112 135 784 2.10 13.03 20.9 28.4
115 139 762 2.40 12.66 20.6 28.5
120 145 735 2.00 12.21 20.3 28.5
130 157 678 2.40 11.27 19.7 28.6
134 162 654 2.00 10.87 19.5 28.6
136 164 648 2.85 10.77 19.3 28.7
152 184 577 2.85 9.59 18.6 28.8
44 53 1991 0.80 33.09 17.0 18.4
52 63 1684 0.95 27.98 19.5 19.1
59 71 1488 0.80 24.72 20.7 18.8
61 73 1447 1.05 24.05 20.9 19.5
66 80 1328 0.80 22.07 21.5 19.1
68 82 1299 1.05 21.58 21.2 19.3
70 84 1264 1.15 21.00 20.7 19.9
76 92 1160 1.05 19.27 20.3 19.6
77 93 1148 1.15 19.08 20.1 19.7
81 98 1083 1.25 17.99 19.5 20.3
84 102 1044 1.30 17.35 19.2 20.4
86 104 1025 1.15 17.03 19.3 19.9
91 109 971 1.35 16.13 18.8 20.1
95 115 921 1.40 15.31 18.3 20.6
101 123 867 1.30 14.40 18.0 20.3 CG082-11P-L132M-04G 127
172
105 127 834 1.50 13.87 17.7 20.4 CF082-11P-L132M-04G 131
114 137 773 1.60 12.84 17.0 20.9
118 143 745 1.40 12.38 17.0 20.6
121 146 728 1.65 12.10 16.8 20.7
135 163 651 1.80 10.82 15.9 21.2
141 170 624 1.80 10.37 15.8 21.0
146 177 602 1.85 10.00 15.6 21.0
158 191 557 1.65 9.26 15.1 21.1
164 198 537 1.70 8.93 14.9 21.1
165 200 531 2.00 8.83 14.8 21.2
185 224 474 1.85 7.88 14.2 21.3
197 238 446 2.25 7.40 13.9 21.4
221 267 398 2.05 6.61 13.3 21.5
234 283 375 2.55 6.24 13.0 21.6
262 317 335 2.30 5.57 12.5 21.6

Legend see page 29

92 WG20 Gear Units and Geared Motors www.weg.net

 PN = 9.2 kW IE3
50 Hz 60 Hz at 50 Hz

9.2 kW 11 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
97 117 908 0.80 15.09 4.4 12.6
102 123 865 0.80 14.38 4.9 13.0
112 135 787 0.90 13.08 5.4 13.0
117 141 753 0.85 12.51 4.5 12.2
120
125
145
151
730
704
0.90
0.95
12.14
11.71
6.0
6.2
13.4
13.5
C
127 153 693 0.95 11.52 4.6 12.4
132 160 665 1.00 11.04 6.3 13.4
137 166 641 1.00 10.65 6.5 13.4
141 171 622 0.95 10.34 5.7 12.8
146 177 602 1.05 10.00 6.9 13.7
153 185 573 1.10 9.53 5.7 12.9
160 194 547 1.10 9.10 7.1 13.7
166 201 529 1.05 8.80 6.4 13.2
178 216 492 1.20 8.18 7.5 14.0
CG072-11P-L132M-04G 103
180 218 488 1.20 8.10 6.4 13.3 170
CF072-11P-L132M-04G 107
191 231 459 1.20 7.63 6.9 13.5
196 237 448 1.30 7.44 7.6 14.0
208 251 423 1.30 7.02 6.8 13.5
216 261 406 1.35 6.75 7.9 14.3
227 274 387 1.30 6.44 7.2 13.8
235 284 374 1.35 6.21 7.3 13.8
238 287 370 1.45 6.14 7.9 14.3
246 298 357 1.45 5.93 7.2 13.8
255 309 344 1.50 5.72 7.3 13.9
275 333 319 1.50 5.30 7.5 14.0
299 361 294 1.60 4.89 7.5 14.1
336 407 261 1.70 4.34 7.7 14.3
365 441 241 1.80 4.00 7.6 14.3
408 493 215 1.95 3.58 7.7 14.5
443 535 198 2.05 3.30 7.6 14.5
121 146 726 0.85 12.07 6.2 6.0
132 159 666 0.95 11.07 6.1 6.1
142 172 617 1.00 10.26 6.1 6.3
155 188 566 1.05 9.40 6.0 6.4
173 209 507 1.10 8.43 6.0 6.6
178 215 493 0.80 8.20 5.8 6.0
180 217 489 1.10 8.13 5.9 6.7
189 228 465 1.15 7.73 5.9 6.7
196 237 449 1.15 7.46 5.8 6.8
201 243 438 0.80 7.28 5.6 6.2
217 262 405 0.95 6.73 5.6 6.4
218 264 403 1.20 6.69 5.8 6.9
238 288 369 1.20 6.13 5.6 7.0 CG062-11P-L132M-04G 87
168
245 296 359 0.95 5.97 5.5 6.6 CF062-11P-L132M-04G 92
255 309 344 1.10 5.71 5.5 6.7
258 312 341 1.25 5.66 5.6 7.1
281 340 312 1.30 5.19 5.5 7.2
288 348 305 1.10 5.07 5.3 6.8
311 376 283 1.25 4.70 5.3 6.9
322 390 273 1.25 4.53 5.2 7.0
350 423 251 1.20 4.17 5.1 7.0
363 439 242 1.25 4.02 5.1 7.1
392 474 224 1.30 3.73 5.0 7.2
441 534 199 1.30 3.31 4.9 7.2
463 560 190 1.35 3.15 4.8 7.3
521 630 168 1.35 2.80 4.7 7.4

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 93

 PN = 11 kW IE3
50 Hz 60 Hz at 50 Hz

11 kW 13 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
4.1 4.9 23459 0.80 360.30 93.8 19.2
4.3 5.2 22286 0.85 342.97 98.8 20.3
4.7 5.7 20208 0.90 311.64 106.4 22.1
5.0 6.0 19116 0.95 295.40 110.0 23.1

C 5.4
5.8
6.5
6.9
17543
16433
1.05
1.10
272.21
255.51
114.6
117.5
24.6
25.6
CG164-22P-160M-04E 810
192
CF164-22P-160M-04E 833
6.3 7.6 15017 1.20 234.46 120.8 26.9
7.2 8.8 12883 1.40 202.79 125.1 28.8
7.3 8.8 12825 1.45 202.30 125.2 28.8
8.4 10 10955 1.65 174.24 128.3 30.5
9.8 12 9359 1.95 150.71 130.6 32.0
6.3 7.6 16770 1.10 234.67 116.6 25.3
7.3 8.8 14444 1.25 202.12 122.0 27.4
8.4 10 12493 1.45 174.82 125.8 29.1
9.5 12 11020 1.65 154.21 128.2 30.5
CG163-22P-160M-04E 764
11 13 9465 1.95 132.44 130.4 31.9 190
CF163-22P-160M-04E 787
13 16 8034 2.25 112.42 132.1 33.2
15 18 6949 2.60 97.24 133.2 34.2
16 19 6534 2.80 91.43 133.6 34.6
17 21 6130 2.95 85.78 134.0 34.9
5.7 6.9 16714 0.80 256.69 86.2 10.7
6.1 7.3 15781 0.85 242.86 89.2 11.7
6.3 7.6 15089 0.90 232.69 91.4 12.4
6.6 8.0 14309 0.95 221.11 93.6 13.2
6.9 8.4 13703 0.95 211.75 95.2 13.8
CG144-22P-160M-04E 559
7.7 9.3 12282 1.10 190.97 98.6 15.2 188
CF144-22P-160M-04E 577
8.1 9.7 11707 1.15 182.40 99.8 15.8
8.8 11 10643 1.25 166.50 101.9 16.8
9.4 11 10019 1.30 157.07 103.0 17.5
10 12 9092 1.45 143.42 104.6 18.4
12 14 7749 1.70 123.51 106.5 19.7
7.1 8.6 14784 0.90 206.88 92.2 12.7
8.1 9.8 12890 1.05 180.38 97.2 14.6
9.5 11 11103 1.20 155.38 101.0 16.4
11 13 9562 1.40 133.80 103.8 17.9
13 15 8352 1.60 116.88 105.7 19.1
CG143-22P-160M-04E 535
15 18 7215 1.85 100.96 107.1 20.3 186
CF143-22P-160M-04E 553
17 21 6079 2.15 85.07 108.4 21.4
18 21 5966 2.20 83.49 108.5 21.5
20 24 5235 2.50 73.25 109.2 22.3
21 26 4910 2.65 68.70 109.4 22.6
23 28 4573 2.85 63.99 109.7 22.9
39 47 2679 2.70 37.48 110.8 24.8 CG142-22P-160M-04E 521
186
69 83 1527 2.70 21.37 111.2 25.6 CF142-22P-160M-04E 539
9.2 11 10373 0.80 159.32 52.5 17.6
CG134-22P-160M-04E 412
10 12 9421 0.85 144.99 57.1 18.7 184
CF134-22P-160M-04E 414
12 14 8090 1.00 125.27 62.4 20.3
11 13 9698 0.85 135.71 55.9 18.4
13 15 8300 1.00 116.14 61.7 20.0
15 18 7168 1.15 100.31 65.4 21.3
16 20 6429 1.25 89.96 67.5 22.2
17 21 6062 1.35 84.82 68.4 22.6
19 23 5580 1.45 78.09 69.5 23.1 CG133-22P-160M-04E 388
182
21 26 4946 1.65 69.21 70.8 23.8 CF133-22P-160M-04E 390
22 26 4822 1.70 67.47 71.0 24.0
25 31 4126 1.95 57.74 72.2 24.8
26 32 4013 2.00 56.16 72.4 24.9
29 36 3564 2.25 49.87 73.0 25.4
35 42 3013 2.70 42.17 73.7 26.1
41 50 2538 2.10 35.51 74.2 26.6
47 57 2213 2.70 30.96 74.5 27.0 CG132-22P-160M-04E 379
182
73 88 1445 2.10 20.22 75.0 27.5 CF132-22P-160M-04E 381
83 101 1260 2.70 17.63 75.1 27.7

94 WG20 Gear Units and Geared Motors www.weg.net

 PN = 11 kW IE3
50 Hz 60 Hz at 50 Hz

11 kW 13 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
19 22 5652 0.80 79.08 28.2 20.0
20 25 5174 0.90 72.40 31.6 20.6
21 26 4889 0.95 68.41 33.4 21.0
25 30 4207 1.10 58.87 36.9 21.9
30
32
36
39
3540
3289
1.30
1.40
49.54
46.03
39.2
38.1
22.7
23.0
CG103-22P-160M-04E
CF103-22P-160M-04E
285
289
178 C
34 42 3054 1.50 42.74 37.1 23.3
41 50 2562 1.80 35.85 34.4 23.9
50 61 2083 2.20 29.15 31.7 24.6
65 78 1629 2.80 22.79 28.7 25.1
50 61 2084 2.20 29.16 31.7 24.6
58 70 1809 2.50 25.31 29.9 24.9
67 81 1563 2.90 21.87 28.3 25.2
87 105 1210 2.25 16.93 25.8 25.1
CG102-22P-160M-04E 280
97 117 1082 2.25 15.15 24.8 25.3 178
CF102-22P-160M-04E 284
100 121 1050 2.60 14.69 24.5 25.4
112 135 940 2.60 13.15 23.5 25.5
116 140 907 3.00 12.70 23.2 25.6
129 156 812 3.00 11.36 22.3 25.7
29 35 3660 0.85 51.22 16.8 24.6
34 41 3115 0.95 43.59 22.0 25.4
37 45 2850 0.95 39.88 23.9 25.8
40 49 2613 1.05 36.57 25.3 26.1
CG093-22P-160M-04E 243
48 58 2202 1.15 30.81 27.4 26.7 174
CF093-22P-160M-04E 241
50 60 2118 1.15 29.63 27.8 26.9
58 70 1805 1.30 25.26 27.2 27.3
73 89 1433 1.50 20.05 24.8 27.9
99 119 1065 1.80 14.90 22.0 28.4
57 69 1834 1.65 25.67 27.4 27.3
66 80 1587 1.90 22.20 25.8 27.7
78 94 1350 2.25 18.89 24.1 28.0
91 110 1149 2.65 16.08 22.7 28.3
100 121 1046 1.75 14.64 22.1 27.9
113 136 931 1.75 13.03 21.1 28.1 CG092-22P-160M-04E 241
174
116 140 905 2.05 12.66 20.8 28.2 CF092-22P-160M-04E 239
130 157 805 2.05 11.27 20.0 28.3
136 165 770 2.40 10.77 19.6 28.5
153 185 685 2.40 9.59 18.8 28.6
160 194 655 2.80 9.17 18.4 28.7
180 218 583 2.80 8.16 17.6 28.8
70 85 1501 0.95 21.00 20.6 19.4
82 99 1286 1.10 17.99 19.8 19.9
96 116 1094 1.20 15.31 18.5 20.3
114 138 918 1.35 12.84 17.3 20.6
121 147 865 1.40 12.10 17.0 20.4
136 164 773 1.50 10.82 16.1 20.9
142 171 741 1.55 10.37 16.0 20.7
159 192 662 1.40 9.26 15.3 20.8
166 200 634 1.75 8.87 14.9 21.2
167 201 631 1.70 8.83 15.0 20.9
187 225 563 1.55 7.88 14.4 21.1 CG082-22P-160M-04E 189
172
199 240 529 1.90 7.40 14.0 21.2 CF082-22P-160M-04E 193
209 252 503 2.05 7.04 13.7 21.5
222 269 472 1.75 6.61 13.5 21.3
236 284 446 2.15 6.24 13.1 21.4
264 319 398 1.90 5.57 12.6 21.5
281 339 374 2.50 5.23 12.2 21.7
287 347 366 2.45 5.12 12.2 21.6
322 389 326 2.15 4.57 11.7 21.7
362 437 290 2.80 4.06 11.2 21.8
406 490 259 2.50 3.63 10.7 21.8
546 659 193 3.00 2.69 9.6 22.0

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 95

 PN = 11 kW IE3
50 Hz 60 Hz at 50 Hz

11 kW 13 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
121 146 867 0.80 12.14 3.9 13.0
133 161 789 0.85 11.04 4.4 13.0
147 178 715 0.90 10.00 5.1 13.4
162 195 650 0.95 9.10 5.5 13.4

C 180
193
217
233
585
545
1.00
1.00
8.18
7.63
6.0
5.4
13.8
13.1
197 238 532 1.10 7.44 6.3 13.8
209 253 502 1.10 7.02 5.4 13.2
218 263 482 1.15 6.75 6.7 14.1
228 276 460 1.10 6.44 6.0 13.4
CG072-22P-160M-04E 165
239 289 439 1.25 6.14 6.8 14.1 170
CF072-22P-160M-04E 169
248 299 424 1.25 5.93 6.0 13.5
277 334 379 1.35 5.31 7.2 14.4
301 363 349 1.35 4.89 6.5 13.9
304 368 345 1.45 4.83 7.2 14.3
339 409 310 1.45 4.34 6.8 14.1
368 444 286 1.55 4.00 6.8 14.1
411 496 256 1.65 3.58 7.0 14.3
446 538 236 1.70 3.30 6.9 14.4
522 630 201 1.95 2.82 7.1 14.5
567 684 185 1.95 2.59 6.9 14.6

Legend see page 29

96 WG20 Gear Units and Geared Motors www.weg.net

 PN = 15 kW IE3
50 Hz 60 Hz at 50 Hz

15 kW 18 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
5.7 6.9 22764 0.80 255.51 96.8 19.8
6.2 7.6 20803 0.90 234.46 104.4 21.6
CG164-22P-160L-04F 833
7.2 8.8 17883 1.05 202.79 113.6 24.3 192
CF164-22P-160L-04F 856
8.4 10 15271 1.20 174.24 120.2 26.6
9.7
6.2
12
7.6
13100
22946
1.40
0.80
150.71
234.67
124.7
96.0
28.6
19.7
C
7.2 8.8 19763 0.95 202.12 107.9 22.5
8.4 10 17094 1.10 174.82 115.8 25.0
9.5 12 15079 1.20 154.21 120.7 26.8
11 13 12950 1.40 132.44 125.0 28.7 CG163-22P-160L-04F 787
190
13 16 10993 1.65 112.42 128.3 30.5 CF163-22P-160L-04F 810
15 18 9509 1.90 97.24 130.4 31.9
16 19 8940 2.05 91.43 131.1 32.4
17 21 8387 2.15 85.78 131.8 32.9
20 24 7203 2.50 73.67 133.0 34.0
7.7 9.3 17013 0.80 190.97 85.1 10.4
8.0 9.7 16217 0.85 182.40 87.8 11.2
8.8 11 14773 0.90 166.50 92.3 12.7 CG144-22P-160L-04F 582
188
9.3 11 13908 0.95 157.07 94.6 13.6 CF144-22P-160L-04F 600
10 12 12647 1.05 143.42 97.7 14.8
12 14 10802 1.25 123.51 101.6 16.7
9.4 11 15193 0.90 155.38 91.0 12.3
11 13 13083 1.00 133.80 96.7 14.4
13 15 11428 1.15 116.88 100.4 16.0
15 18 9872 1.35 100.96 103.3 17.6
17 21 8318 1.60 85.07 105.7 19.2
CG143-22P-160L-04F 558
18 21 8164 1.60 83.49 105.9 19.3 186
CF143-22P-160L-04F 576
20 24 7163 1.85 73.25 107.2 20.3
21 26 6718 1.95 68.70 107.7 20.8
23 28 6257 2.10 63.99 108.2 21.2
27 32 5405 2.45 55.27 109.0 22.1
32 39 4470 2.95 45.71 109.8 23.0
39 47 3665 1.95 37.48 110.3 23.8
45 55 3157 3.00 32.28 110.6 24.3 CG142-22P-160L-04F 544
186
69 83 2090 1.95 21.37 111.0 24.9 CF142-22P-160L-04F 562
80 96 1800 3.00 18.41 111.1 25.3
15 18 9809 0.85 100.31 55.3 18.3
16 20 8796 0.95 89.96 59.8 19.5
17 21 8294 1.00 84.82 61.7 20.0
19 23 7636 1.05 78.09 64.0 20.8
21 26 6768 1.20 69.21 66.6 21.8
22 26 6597 1.25 67.47 67.0 22.0 CG133-22P-160L-04F 411
182
25 31 5646 1.45 57.74 69.4 23.1 CF133-22P-160L-04F 413
26 32 5491 1.50 56.16 69.7 23.2
29 36 4876 1.65 49.87 70.9 23.9
35 42 4123 1.95 42.17 72.2 24.8
43 52 3365 2.40 34.41 73.3 25.7
52 64 2730 2.95 27.92 74.0 26.4
41 50 3472 1.55 35.51 73.2 25.5
47 57 3028 1.95 30.96 73.7 26.0
55 67 2608 3.00 26.67 74.1 26.5 CG132-22P-160L-04F 402
182
72 88 1977 1.55 20.22 74.7 26.7 CF132-22P-160L-04F 404
83 101 1724 1.95 17.63 74.8 27.1
96 117 1485 3.00 15.19 75.0 27.4
25 30 5756 0.80 58.87 27.3 19.9
30 36 4844 0.95 49.54 33.7 21.0
32 39 4501 1.00 46.03 35.5 21.5
CG103-22P-160L-04F 308
34 42 4179 1.10 42.74 37.1 21.9 178
CF103-22P-160L-04F 312
41 50 3505 1.30 35.85 35.8 22.7
50 61 2850 1.60 29.15 32.9 23.6
64 78 2228 2.05 22.79 29.7 24.4

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 97

 PN = 15 kW IE3
50 Hz 60 Hz at 50 Hz

15 kW 18 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
50 61 2851 1.60 29.16 32.9 23.6
58 70 2475 1.85 25.31 30.9 24.1
67 81 2138 2.15 21.87 29.1 24.5
78 95 1830 2.50 18.71 27.4 24.9

C 87
91
105
110
1655
1580
1.65
2.85
16.93
16.16
26.6
25.8
24.3
25.2
97 117 1481 1.65 15.15 25.5 24.5
CG102-22P-160L-04F 303
100 121 1437 1.90 14.69 25.1 24.7 178
CF102-22P-160L-04F 307
111 135 1286 1.90 13.15 24.2 24.9
115 140 1241 2.20 12.70 23.8 25.0
129 156 1111 2.20 11.36 22.8 25.2
135 163 1062 2.55 10.86 22.3 25.3
151 183 951 2.55 9.72 21.4 25.5
156 189 918 2.95 9.38 21.1 25.6
174 211 821 2.95 8.40 20.3 25.7
48 58 3013 0.85 30.81 22.8 25.5
49 60 2898 0.85 29.63 23.6 25.7
CG093-22P-160L-04F 266
58 70 2470 0.95 25.26 26.1 26.4 174
CF093-22P-160L-04F 264
73 89 1961 1.10 20.05 25.7 27.1
98 119 1457 1.35 14.90 22.7 27.8
57 69 2510 1.20 25.67 25.9 26.3
66 80 2171 1.40 22.20 26.8 26.8
78 94 1847 1.65 18.89 25.0 27.3
91 110 1572 1.95 16.08 23.4 27.7
100 121 1431 1.30 14.64 22.8 27.1
106 128 1356 2.25 13.87 22.0 28.0
112 136 1274 1.30 13.03 21.8 27.4
116 140 1238 1.50 12.66 21.5 27.5
126 153 1138 2.65 11.63 20.5 28.3 CG092-22P-160L-04F 264
174
130 157 1102 1.50 11.27 20.6 27.7 CF092-22P-160L-04F 262
136 165 1053 1.75 10.77 20.1 27.9
153 185 938 1.75 9.59 19.3 28.1
160 194 896 2.05 9.17 18.9 28.2
180 218 798 2.05 8.16 18.1 28.3
185 224 773 2.40 7.91 17.8 28.4
208 252 688 2.40 7.04 17.1 28.6
221 268 649 2.85 6.63 16.6 28.7
248 301 577 2.85 5.91 16.0 28.8
81 99 1759 0.80 17.99 18.9 18.9
96 116 1497 0.90 15.31 19.3 19.4
114 138 1256 1.00 12.84 17.9 19.9
121 147 1184 1.00 12.10 17.7 19.6
135 164 1058 1.10 10.82 16.7 20.3
136 164 1057 0.95 10.81 16.9 19.8
141 171 1014 1.15 10.37 16.6 20.0
158 192 905 1.05 9.26 15.9 20.2
165 200 868 1.30 8.87 15.4 20.7
166 201 863 1.25 8.83 15.5 20.4
186 225 771 1.15 7.88 14.9 20.5
CG082-22P-160L-04F 212
198 240 724 1.40 7.40 14.4 20.7 172
CF082-22P-160L-04F 216
208 252 689 1.50 7.04 14.0 21.1
222 269 646 1.25 6.61 13.8 20.9
235 284 610 1.55 6.24 13.5 21.0
263 319 545 1.40 5.57 12.9 21.1
280 339 512 1.85 5.23 12.5 21.5
286 347 500 1.80 5.12 12.5 21.3
321 389 447 1.60 4.57 12.0 21.4
361 437 397 2.05 4.06 11.4 21.5
404 490 354 1.85 3.63 11.0 21.6
486 588 295 2.50 3.02 10.2 21.8
544 659 263 2.20 2.69 9.8 21.8

Legend see page 29

98 WG20 Gear Units and Geared Motors www.weg.net

 PN = 15 kW IE3
50 Hz 60 Hz at 50 Hz

15 kW 18 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
197 238 728 0.80 7.44 3.3 13.2
209 253 687 0.80 7.02 2.2 12.4
217 263 660 0.85 6.75 4.0 13.6
228 276 630 0.80 6.44 3.1 12.7
239
247
289
299
600
580
0.90
0.90
6.14
5.93
4.4
3.3
13.6
12.9
C
276 334 519 1.00 5.31 5.1 14.0
CG072-22P-160L-04F 188
300 363 478 1.00 4.89 4.2 13.3 170
CF072-22P-160L-04F 192
303 368 472 1.05 4.83 5.3 14.0
338 409 424 1.05 4.34 4.9 13.6
366 444 391 1.15 4.00 4.9 13.7
409 496 350 1.20 3.58 5.4 13.9
444 538 322 1.25 3.30 5.4 14.0
520 630 275 1.40 2.82 5.8 14.2
565 684 254 1.45 2.59 5.7 14.3

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 99

 PN = 18.5 kW IE3
50 Hz 60 Hz at 50 Hz

18.5 kW 22 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
7.2 8.8 22162 0.85 202.79 99.3 20.4
7.3 8.8 22108 0.85 202.30 99.5 20.4 CG164-22P-180M-04E 847
192
8.4 10 18963 0.95 174.24 110.5 23.3 CF164-22P-180M-04E 870
9.8 12 16268 1.15 150.71 117.9 25.7

C 8.4
9.5
10
12
21011
18534
0.90
1.00
174.82
154.21
103.6
111.7
21.4
23.7
11 13 15918 1.15 132.44 118.7 26.0
13 16 13244 1.40 110.19 124.4 28.5
15 18 11687 1.55 97.24 127.2 29.9
CG163-22P-180M-04E 801
16 19 10989 1.65 91.43 128.3 30.5 190
CF163-22P-180M-04E 824
17 21 10309 1.75 85.78 129.3 31.1
19 23 9164 2.00 76.25 130.8 32.2
20 24 8854 2.05 73.67 131.2 32.5
24 29 7367 2.45 61.29 132.8 33.8
29 35 6112 2.95 50.86 134.0 34.9
11 13 16081 0.85 133.80 88.3 11.4
13 15 14047 0.95 116.88 94.3 13.4
15 18 12134 1.10 100.96 98.9 15.3
17 21 10224 1.30 85.07 102.7 17.3
18 21 10034 1.30 83.49 103.0 17.4
20 24 8804 1.50 73.25 105.0 18.7 CG143-22P-180M-04E 572
186
21 26 8257 1.60 68.70 105.8 19.2 CF143-22P-180M-04E 590
23 28 7691 1.70 63.99 106.5 19.8
26 31 6787 1.95 56.47 107.6 20.7
27 32 6643 2.00 55.27 107.8 20.8
32 39 5494 2.40 45.71 108.9 22.0
39 47 4521 2.90 37.61 109.7 23.0
39 47 4505 1.60 37.48 109.7 23.0
46 55 3880 2.45 32.28 110.2 23.6 CG142-22P-180M-04E 558
186
69 83 2569 1.60 21.37 110.9 24.3 CF142-22P-180M-04E 576
80 96 2213 2.45 18.41 111.0 24.8
17 21 10194 0.80 84.82 53.4 17.9
19 23 9385 0.90 78.09 57.3 18.8
21 26 8319 1.00 69.21 61.6 20.0
22 26 8109 1.00 67.47 62.4 20.2
25 31 6939 1.20 57.74 66.1 21.6
26 32 6749 1.20 56.16 66.6 21.8 CG133-22P-180M-04E 425
182
29 36 5994 1.35 49.87 68.6 22.7 CF133-22P-180M-04E 427
33 40 5388 1.50 44.83 69.9 23.3
35 42 5068 1.60 42.17 70.6 23.7
43 52 4136 1.95 34.41 72.2 24.8
53 64 3355 2.40 27.92 73.3 25.7
66 80 2679 3.00 22.29 74.1 26.4
47 57 3721 1.60 30.96 72.8 25.2
55 67 3205 2.45 26.67 73.5 25.8
CG132-22P-180M-04E 416
64 77 2760 2.90 22.97 74.0 26.3 182
CF132-22P-180M-04E 418
83 101 2119 1.60 17.63 74.5 26.5
97 117 1825 2.45 15.19 74.8 26.9
30 36 5954 0.80 49.54 25.5 19.6
32 39 5532 0.85 46.03 29.1 20.2
34 42 5136 0.90 42.74 31.9 20.7
40 48 4407 1.05 36.67 36 21.6 CG103-22P-180M-04E 322
178
41 50 4309 1.05 35.85 36.5 21.7 CF103-22P-180M-04E 326
50 61 3503 1.30 29.15 33.8 22.7
65 78 2739 1.65 22.79 30.3 23.7
81 98 2182 2.10 18.16 27.6 24.4

Legend see page 29

100 WG20 Gear Units and Geared Motors www.weg.net

 PN = 18.5 kW IE3
50 Hz 60 Hz at 50 Hz

18.5 kW 22 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
58 70 3042 1.50 25.31 31.8 23.3
67 81 2628 1.75 21.87 29.9 23.9
79 95 2249 2.05 18.71 27.9 24.3
91 110 1943 2.35 16.16 26.3 24.7
100
108
121
130
1766
1643
1.55
2.75
14.69
13.67
25.7
24.6
24.1
25.1
C
112 135 1580 1.55 13.15 24.6 24.4
CG102-22P-180M-04E 317
116 140 1526 1.80 12.70 24.2 24.5 178
CF102-22P-180M-04E 321
129 156 1365 1.80 11.36 23.2 24.8
135 163 1306 2.10 10.86 22.7 24.9
151 183 1168 2.10 9.72 21.8 25.1
157 189 1128 2.40 9.38 21.4 25.2
175 211 1009 2.40 8.40 20.6 25.4
185 224 954 2.85 7.93 20.1 25.5
207 250 853 2.85 7.10 19.3 25.7
66 80 2669 1.15 22.20 25.0 26.1
78 94 2270 1.35 18.89 25.7 26.6
91 110 1932 1.60 16.08 24.0 27.1
106 128 1667 1.80 13.87 22.6 27.5
116 140 1522 1.20 12.66 22.0 26.9
126 153 1398 2.15 11.63 21.0 27.9
130 157 1355 1.20 11.27 21.1 27.2
136 165 1295 1.45 10.77 20.6 27.4
153 185 1152 1.45 9.59 19.7 27.6
CG092-22P-180M-04E 278
155 188 1137 2.50 9.46 19.3 28.3 174
CF092-22P-180M-04E 276
160 194 1102 1.70 9.17 19.3 27.8
180 218 981 1.70 8.16 18.4 28.0
186 224 951 1.95 7.91 18.1 28.1
199 240 889 2.95 7.40 17.5 28.7
209 252 846 1.95 7.04 17.4 28.2
222 268 797 2.30 6.63 16.9 28.4
249 301 710 2.30 5.91 16.2 28.5
272 329 648 2.85 5.39 15.6 28.7
306 370 577 2.85 4.80 15.0 28.8
114 138 1544 0.80 12.84 18.5 19.3
136 164 1301 0.90 10.82 17.1 19.8
142 171 1246 0.90 10.37 17.1 19.4
159 192 1113 0.85 9.26 16.3 19.7
166 200 1066 1.05 8.87 15.7 20.3
167 201 1061 1.00 8.83 15.9 19.9
187 225 947 0.95 7.88 15.2 20.1
199 240 890 1.15 7.40 14.8 20.3
209 252 846 1.20 7.04 14.3 20.8
CG082-22P-180M-04E 226
222 269 795 1.05 6.61 14.2 20.5 172
CF082-22P-180M-04E 230
236 284 750 1.30 6.24 13.8 20.6
264 319 670 1.15 5.57 13.2 20.8
281 339 629 1.50 5.23 12.7 21.2
287 347 615 1.45 5.12 12.7 21.0
322 389 549 1.30 4.57 12.2 21.1
362 437 488 1.70 4.06 11.6 21.3
406 490 436 1.50 3.63 11.1 21.4
487 588 363 2.05 3.02 10.3 21.6
546 659 324 1.80 2.69 9.9 21.7

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 101

 PN = 22 kW IE3
50 Hz 60 Hz at 50 Hz

22 kW 26 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
8.4 10 22690 0.80 174.24 97.1 19.9 CG164-22P-180L-04F 868
192
9.8 12 19506 0.95 150.71 108.8 22.8 CF164-22P-180L-04F 891
9.5 12 22040 0.85 154.21 99.8 20.5
11 13 18929 1.00 132.44 110.6 23.3

C 13
15
16
18
16068
13898
1.15
1.30
112.42
97.24
118.4
123.2
25.9
27.9
16 19 13068 1.40 91.43 124.8 28.6
CG163-22P-180L-04F 822
17 21 12260 1.50 85.78 126.2 29.4 190
CF163-22P-180L-04F 845
19 23 10898 1.70 76.25 128.4 30.6
20 24 10529 1.75 73.67 129.0 30.9
24 29 8760 2.10 61.29 131.3 32.5
29 35 7269 2.50 50.86 132.9 33.9
35 42 6062 3.00 42.41 134.0 35.0
45 54 4717 3.00 33.00 135 36.2 CG162-22P-180L-04F 797
190
83 100 2529 3.00 17.70 136 37.9 CF162-22P-180L-04F 820
13 15 16704 0.80 116.88 86.2 10.8
15 18 14429 0.95 100.96 93.2 13.0
17 21 12158 1.10 85.07 98.8 15.3
18 21 11933 1.10 83.49 99.3 15.5
20 24 10470 1.25 73.25 102.2 17.0
21 26 9819 1.35 68.70 103.4 17.7 CG143-22P-180L-04F 593
186
23 28 9146 1.45 63.99 104.5 18.3 CF143-22P-180L-04F 611
26 31 8071 1.65 56.47 106.0 19.4
27 32 7900 1.65 55.27 106.3 19.6
32 39 6533 2.00 45.71 107.9 21.0
39 47 5376 2.45 37.61 109.0 22.1
48 57 4419 2.90 30.92 109.8 23.1
39 47 5357 1.35 37.48 109.1 22.1
46 55 4614 2.05 32.28 109.7 22.9
53 64 3991 2.95 27.92 110.1 23.5 CG142-22P-180L-04F 579
186
69 83 3055 1.35 21.37 110.6 23.7 CF142-22P-180L-04F 597
80 96 2631 2.05 18.41 110.8 24.3
92 111 2276 2.95 15.92 111.0 24.7
21 26 9892 0.85 69.21 54.9 18.2
22 26 9643 0.85 67.47 56.1 18.5
25 31 8252 1.00 57.74 61.9 20.1
26 32 8026 1.00 56.16 62.7 20.3
29 36 7127 1.15 49.87 65.6 21.4 CG133-22P-180L-04F 446
182
33 40 6408 1.25 44.83 67.5 22.2 CF133-22P-180L-04F 448
35 42 6027 1.35 42.17 68.5 22.6
43 52 4918 1.65 34.41 70.9 23.9
53 64 3990 2.05 27.92 72.4 24.9
66 80 3186 2.55 22.29 73.5 25.9
47 57 4425 1.35 30.96 71.7 24.4
55 67 3812 2.05 26.67 72.7 25.1
64 77 3283 2.45 22.97 73.4 25.8
CG132-22P-180L-04F 437
73 88 2867 2.80 20.06 73.9 26.2 182
CF132-22P-180L-04F 439
83 101 2520 1.35 17.63 74.2 26.0
97 117 2170 2.05 15.19 74.5 26.5
112 136 1869 2.65 13.08 74.5 26.9
40 48 5241 0.90 36.67 31.2 20.5
41 50 5124 0.90 35.85 32.0 20.7
CG103-22P-180L-04F 343
50 61 4166 1.10 29.15 34.8 21.9 178
CF103-22P-180L-04F 347
65 78 3257 1.40 22.79 31.0 23.1
81 98 2595 1.75 18.16 28.2 23.9

Legend see page 29

102 WG20 Gear Units and Geared Motors www.weg.net

 PN = 22 kW IE3
50 Hz 60 Hz at 50 Hz

22 kW 26 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
58 70 3617 1.25 25.31 32.6 22.6
67 81 3125 1.45 21.87 30.6 23.2
79 95 2675 1.70 18.71 28.5 23.8
91 110 2310 1.95 16.16 26.9 24.3
100
108
121
130
2100
1953
1.30
2.35
14.69
13.67
26.2
25.1
23.5
24.7
C
112 135 1879 1.30 13.15 25.1 23.8
116 140 1815 1.50 12.70 24.6 24.0
129 156 1624 1.50 11.36 23.6 24.3 CG102-22P-180L-04F 338
178
132 159 1594 2.85 11.15 23.1 25.2 CF102-22P-180L-04F 342
135 163 1553 1.75 10.86 23.1 24.5
151 183 1389 1.75 9.72 22.2 24.7
157 189 1341 2.05 9.38 21.8 24.9
175 211 1200 2.05 8.40 20.9 25.1
185 224 1134 2.40 7.93 20.4 25.2
207 250 1015 2.40 7.10 19.6 25.4
227 274 925 2.95 6.47 18.8 25.6
254 306 828 2.95 5.79 18.1 25.7
66 80 3173 0.95 22.20 21.6 25.3
78 94 2700 1.15 18.89 24.8 26.0
91 110 2298 1.35 16.08 24.7 26.6
106 128 1982 1.55 13.87 23.1 27.1
116 140 1810 1.05 12.66 22.6 26.4
126 153 1663 1.80 11.63 21.5 27.5
130 157 1611 1.05 11.27 21.6 26.7
136 165 1540 1.20 10.77 21.1 26.9
153 185 1370 1.20 9.59 20.1 27.2
CG092-22P-180L-04F 299
155 188 1352 2.10 9.46 19.7 28.0 174
CF092-22P-180L-04F 297
160 194 1310 1.40 9.17 19.7 27.4
180 218 1166 1.40 8.16 18.8 27.6
186 224 1130 1.65 7.91 18.5 27.7
199 240 1057 2.50 7.40 17.8 28.4
209 252 1006 1.65 7.04 17.7 27.9
222 268 948 1.95 6.63 17.2 28.1
249 301 844 1.95 5.91 16.5 28.3
272 329 771 2.40 5.39 15.8 28.4
306 370 686 2.40 4.80 15.2 28.6
142 171 1482 0.80 10.37 17.5 18.8
166 200 1268 0.90 8.87 16.1 19.9
167 201 1261 0.85 8.83 16.3 19.4
187 225 1126 0.80 7.88 15.6 19.6
199 240 1058 0.95 7.40 15.1 19.9
209 252 1007 1.05 7.04 14.6 20.4
222 269 945 0.90 6.61 14.5 20.1
236 284 892 1.10 6.24 14.1 20.3 CG082-22P-180L-04F 247
172
264 319 796 0.95 5.57 13.5 20.5 CF082-22P-180L-04F 251
281 339 748 1.25 5.23 12.9 21.0
287 347 731 1.25 5.12 13.0 20.7
322 389 653 1.10 4.57 12.4 20.8
362 437 580 1.40 4.06 11.8 21.1
406 490 518 1.25 3.63 11.3 21.2
487 588 431 1.75 3.02 10.5 21.4
546 659 385 1.50 2.69 10.0 21.5

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 103

 PN = 30 kW IE3
50 Hz 60 Hz at 50 Hz

30 kW 36 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
13 16 21331 0.85 110.19 102.5 21.1
15 18 18824 1.00 97.24 110.9 23.4
16 19 17699 1.05 91.43 114.1 24.4
17 21 16605 1.10 85.78 117.0 25.4

C 19
20
23
24
14760
14261
1.25
1.30
76.25
73.67
121.4
122.4
27.1
27.5
CG163-22P-200L-04E 880
23 27 12687 1.45 65.54 125.5 29.0 190
CF163-22P-200L-04E 903
24 29 11865 1.55 61.29 126.9 29.7
26 31 10979 1.65 56.72 128.3 30.5
29 35 9845 1.85 50.86 129.9 31.6
35 42 8210 2.20 42.41 132.0 33.0
41 49 7057 2.60 36.45 133.1 34.1
47 56 6107 2.90 31.55 134.0 35.0
45 54 6388 2.20 33.00 133.7 34.7 CG162-22P-200L-04E 855
190
84 101 3426 2.20 17.70 135.7 37.0 CF162-22P-200L-04E 878
18 21 16162 0.85 83.49 88.0 11.3
20 24 14181 0.95 73.25 93.9 13.3
22 26 13300 1.00 68.70 96.2 14.2
23 28 12387 1.05 63.99 98.3 15.1
26 32 10932 1.20 56.47 101.4 16.5
27 32 10700 1.25 55.27 101.8 16.8
CG143-22P-200L-04E 651
31 37 9282 1.45 47.95 104.3 18.2 186
CF143-22P-200L-04E 669
32 39 8849 1.50 45.71 104.9 18.6
36 43 7923 1.65 40.93 106.2 19.6
39 47 7282 1.80 37.61 107.1 20.2
48 58 5985 2.15 30.92 108.5 21.5
56 68 5082 2.40 26.25 109.3 22.4
66 79 4338 2.70 22.41 109.9 23.2
53 64 5405 2.20 27.92 109.0 22.1
60 72 4768 2.75 24.63 109.5 22.7 CG142-22P-200L-04E 637
186
93 112 3082 2.20 15.92 110.6 23.7 CF142-22P-200L-04E 655
105 127 2719 3.00 14.05 110.8 24.2
30 36 9654 0.85 49.87 56.1 18.5
33 40 8679 0.95 44.83 60.2 19.6
35 42 8163 1.00 42.17 62.2 20.2
40 48 7204 1.15 37.21 65.3 21.3 CG133-22P-200L-04E 504
182
43 52 6661 1.25 34.41 66.9 21.9 CF133-22P-200L-04E 506
53 64 5404 1.50 27.92 69.9 23.3
66 80 4315 1.90 22.29 71.9 24.6
80 96 3581 2.25 18.50 73.0 25.4
64 78 4446 1.80 22.97 71.7 24.4
74 89 3884 2.10 20.06 72.6 25.1
85 103 3355 2.40 17.33 73.3 25.7
CG132-22P-200L-04E 495
103 124 2774 2.90 14.33 72.1 26.3 182
CF132-22P-200L-04E 497
113 136 2531 1.95 13.08 69.3 25.9
130 156 2211 2.25 11.42 68.1 26.4
150 180 1910 2.60 9.87 66.8 26.8
79 95 3622 1.25 18.71 29.9 22.6
92 110 3129 1.45 16.16 28.0 23.2
108 130 2646 1.75 13.67 26.1 23.8
133 160 2159 2.10 11.15 23.9 24.5
136 164 2103 1.30 10.86 24.0 23.5
152 183 1882 1.30 9.72 23.0 23.8
158 190 1817 1.50 9.38 22.5 24.0
CG102-22P-200L-04E 396
164 197 1752 2.60 9.05 21.9 25.0 178
CF102-22P-200L-04E 400
176 212 1625 1.50 8.40 21.6 24.3
187 224 1536 1.80 7.93 21.0 24.5
208 251 1374 1.80 7.10 20.1 24.7
229 275 1253 2.20 6.47 19.3 25.0
255 307 1122 2.20 5.79 18.6 25.2
282 339 1017 2.70 5.25 17.8 25.4
315 379 910 2.70 4.70 17.1 25.6

Legend see page 29

104 WG20 Gear Units and Geared Motors www.weg.net

 PN = 30 kW IE3
50 Hz 60 Hz at 50 Hz

30 kW 36 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
92 111 3112 1.00 16.08 22.1 25.4
107 128 2685 1.15 13.87 24.3 26.0
127 153 2252 1.35 11.63 22.4 26.7
156 188 1831 1.55 9.46 20.5 27.3
161
181
194
218
1775
1580
1.05
1.05
9.17
8.16
20.5
19.6
26.4
26.7
C
187 225 1531 1.20 7.91 19.2 26.9
200 241 1432 1.85 7.40 18.4 27.9
CG092-22P-200L-04E 357
210 253 1363 1.20 7.04 18.4 27.2 174
CF092-22P-200L-04E 355
223 268 1284 1.45 6.63 17.8 27.4
251 301 1143 1.45 5.91 17.0 27.6
274 330 1044 1.75 5.39 16.3 27.9
308 371 930 1.75 4.80 15.6 28.1
351 422 816 2.25 4.22 14.8 28.4
394 474 727 2.25 3.75 14.1 28.5
440 530 651 2.80 3.36 13.5 28.7
495 595 579 2.80 2.99 12.9 28.8

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 105

 PN = 37 kW IE3
50 Hz 60 Hz at 50 Hz

37 kW 44 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
15 18 23217 0.80 97.24 94.9 19.4
16 19 21829 0.85 91.43 100.6 20.7
17 21 20479 0.90 85.78 105.5 21.9
19 23 18204 1.00 76.25 112.7 24.0

C 20
23
24
27
17588
15647
1.05
1.20
73.67
65.54
114.4
119.4
24.5
26.3 CG163-22P-200L-04F 907
190
24 29 14634 1.25 61.29 121.6 27.2 CF163-22P-200L-04F 930
26 31 13541 1.35 56.72 123.9 28.2
29 35 12142 1.50 50.86 126.4 29.5
35 42 10126 1.80 42.41 129.6 31.3
41 49 8703 2.10 36.45 131.4 32.6
47 56 7532 2.35 31.55 132.7 33.7
45 54 7879 1.80 33.00 132.3 33.3
CG162-22P-200L-04F 882
59 71 6005 3.00 25.15 134.1 35.0 190
CF162-22P-200L-04F 905
84 101 4225 1.80 17.70 135.3 36.1
22 26 16403 0.80 68.70 87.2 11.1
23 28 15278 0.90 63.99 90.8 12.2
26 32 13483 1.00 56.47 95.7 14.0
27 32 13197 1.00 55.27 96.4 14.3
31 37 11447 1.15 47.95 100.3 16.0
CG143-22P-200L-04F 678
32 39 10914 1.20 45.71 101.4 16.6 186
CF143-22P-200L-04F 696
36 44 9771 1.35 40.93 103.5 17.7
39 47 8981 1.45 37.61 104.7 18.5
48 58 7382 1.75 30.92 106.9 20.1
56 68 6268 1.95 26.25 108.2 21.2
66 80 5350 2.20 22.41 109.1 22.1
53 64 6667 1.80 27.92 107.8 20.8
60 72 5881 2.25 24.63 108.6 21.6
70 84 5050 2.60 21.15 109.3 22.4 CG142-22P-200L-04F 664
186
93 112 3802 1.80 15.92 110.2 22.8 CF142-22P-200L-04F 682
105 127 3353 2.45 14.05 108.7 23.4
123 148 2880 2.80 12.06 105.7 24.0
35 42 10068 0.80 42.17 54.1 18.0
40 48 8884 0.95 37.21 59.4 19.4
43 52 8215 1.00 34.41 62.0 20.1 CG133-22P-200L-04F 531
182
53 64 6666 1.25 27.92 66.2 21.9 CF133-22P-200L-04F 533
66 80 5321 1.55 22.29 68.1 23.4
80 96 4417 1.85 18.50 68.3 24.5
64 78 5483 1.50 22.97 68.0 23.2
74 89 4790 1.70 20.06 68.2 24.0
85 103 4137 1.95 17.33 68.4 24.8
103 124 3422 2.35 14.33 67.8 25.6
CG132-22P-200L-04F 522
113 136 3122 1.60 13.08 65.0 25.1 182
CF132-22P-200L-04F 524
125 151 2816 2.85 11.79 66.8 26.3
130 156 2727 1.85 11.42 64.3 25.7
150 181 2356 2.10 9.87 63.5 26.2
181 218 1948 2.55 8.16 62.1 26.8

Legend see page 29

106 WG20 Gear Units and Geared Motors www.weg.net

 PN = 37 kW IE3
50 Hz 60 Hz at 50 Hz

37 kW 44 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
79 95 4468 1.05 18.71 31.2 21.5
92 110 3859 1.20 16.16 29.1 22.3
108 130 3263 1.40 13.67 27.0 23.1
133 160 2663 1.70 11.15 24.6 23.8
136
152
164
183
2594
2321
1.05
1.05
10.86
9.72
24.8
23.7
22.7
23.0
C
158 190 2240 1.25 9.38 23.2 23.3
164 197 2160 2.10 9.05 22.5 24.5
176 212 2005 1.25 8.40 22.2 23.6
187 225 1894 1.45 7.93 21.6 23.9
CG102-22P-200L-04F 423
205 247 1725 2.65 7.22 20.4 25.0 178
CF102-22P-200L-04F 427
208 251 1695 1.45 7.10 20.7 24.2
229 275 1546 1.75 6.47 19.8 24.5
247 297 1431 3.15 6.00 18.9 25.4
255 308 1383 1.75 5.79 19.0 24.7
282 339 1254 2.20 5.25 18.2 25.0
315 379 1122 2.20 4.70 17.4 25.2
353 425 1001 2.70 4.19 16.6 25.5
394 475 896 2.70 3.75 15.9 25.6
425 512 831 3.25 3.48 15.4 25.8
475 572 744 3.25 3.11 14.8 25.9

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 107

 PN = 45 kW IE3
50 Hz 60 Hz at 50 Hz

45 kW 55 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
19 23 22140 0.85 76.25 99.4 20.4
20 24 21391 0.85 73.67 102.2 21.1
23 27 19030 0.95 65.54 110.3 23.2
24 29 17798 1.05 61.29 113.9 24.3

C
CG163-22P-225S/M-04F 1044
26 31 16469 1.10 56.72 117.4 25.5 190
CF163-22P-225S/M-04F 1067
29 35 14767 1.25 50.86 121.3 27.1
35 42 12315 1.50 42.41 126.1 29.3
41 49 10585 1.75 36.45 128.9 30.9
47 56 9161 1.95 31.55 130.8 32.2
45 54 9582 1.50 33.00 130.3 31.8
59 71 7304 2.50 25.15 132.9 33.9
CG162-22P-225S/M-04F 1019
70 84 6133 2.95 21.12 134.0 34.9 190
CF162-22P-225S/M-04F 1042
84 101 5138 1.50 17.70 134.7 35.2
110 132 3917 2.60 13.49 135.4 36.5
26 32 16398 0.80 56.47 87.2 11.1
27 32 16050 0.85 55.27 88.4 11.4
31 37 13923 0.95 47.95 94.6 13.5
32 39 13273 1.00 45.71 96.3 14.2
CG143-22P-225S/M-04F 815
36 44 11884 1.10 40.93 99.4 15.6 186
CF143-22P-225S/M-04F 833
39 47 10922 1.20 37.61 101.4 16.6
48 58 8978 1.45 30.92 104.7 18.5
56 68 7623 1.60 26.25 106.6 19.9
66 80 6506 1.80 22.41 107.9 21.0
53 64 8108 1.50 27.92 106.0 19.4
60 72 7152 1.85 24.63 107.2 20.3
70 84 6142 2.15 21.15 108.3 21.3
CG142-22P-225S/M-04F 801
84 101 5111 2.55 17.60 109.3 22.4 186
CF142-22P-225S/M-04F 819
93 112 4624 1.50 15.92 105.4 21.8
105 127 4078 2.00 14.05 104.1 22.5
123 148 3503 2.30 12.06 101.7 23.2
64 78 6669 1.20 22.97 60.1 21.9
74 89 5825 1.40 20.06 61.3 22.8
85 103 5032 1.60 17.33 62.5 23.8
103 124 4161 1.95 14.33 62.9 24.7
113 136 3797 1.30 13.08 59.9 24.2
125 151 3424 2.35 11.79 62.7 25.6
130 156 3317 1.50 11.42 59.9 24.8
150 181 2865 1.75 9.87 59.7 25.5 CG132-22P-225S/M-04F 659
182
153 184 2815 2.85 9.69 61.7 26.3 CF132-22P-225S/M-04F 661
180 217 2390 3.35 8.23 60.7 26.8
181 218 2369 2.10 8.16 58.9 26.2
211 254 2040 3.95 7.03 59.5 27.2
220 265 1950 2.55 6.71 57.7 26.8
268 323 1603 3.10 5.52 56.1 27.3
316 380 1361 3.65 4.69 54.6 27.6
370 446 1161 4.30 4.00 53.1 27.9

Legend see page 29

108 WG20 Gear Units and Geared Motors www.weg.net

 PN = 55 kW IE3
50 Hz 60 Hz at 50 Hz

55 kW 66 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
23 27 23259 0.80 65.54 94.7 19.4
24 29 21753 0.85 61.29 100.9 20.7
26 31 20128 0.90 56.72 106.7 22.2
CG163-22P-225S/M-04G 1092
29 35 18049 1.00 50.86 113.2 24.1 190
CF163-22P-225S/M-04G 1115
35
41
42
49
15052
12938
1.20
1.40
42.41
36.45
120.7
125.0
26.8
28.7
C
47 57 11196 1.60 31.55 128.0 30.3
59 71 8927 2.05 25.15 131.1 32.4
70 85 7495 2.45 21.12 132.7 33.7
CG162-22P-225S/M-04G 1067
85 103 6168 2.95 17.38 133.9 34.9 190
CF162-22P-225S/M-04G 1090
110 132 4787 2.10 13.49 134.9 35.6
131 158 4019 2.85 11.33 135.4 36.4
31 37 17017 0.80 47.95 85.1 10.4
32 39 16223 0.85 45.71 87.8 11.2
36 44 14525 0.90 40.93 93.0 12.9
CG143-22P-225S/M-04G 863
39 47 13349 1.00 37.61 96.1 14.1 186
CF143-22P-225S/M-04G 881
48 58 10973 1.20 30.92 101.3 16.5
56 68 9317 1.30 26.25 103.5 18.2
66 80 7952 1.50 22.41 103.8 19.5
60 72 8741 1.50 24.63 103.6 18.7
70 84 7507 1.75 21.15 103.7 20.0
84 101 6246 2.10 17.60 103.2 21.2
CG142-22P-225S/M-04G 849
101 122 5183 2.55 14.60 101.9 22.3 186
CF142-22P-225S/M-04G 867
105 127 4985 1.65 14.05 98.2 21.4
123 148 4281 1.90 12.06 96.7 22.2
147 178 3562 2.60 10.04 94.9 23.1
74 89 7120 1.15 20.06 52.6 21.4
85 103 6150 1.35 17.33 55.0 22.5
103 125 5086 1.60 14.33 56.7 23.7
125 151 4185 1.95 11.79 57.6 24.7
130 156 4054 1.25 11.42 54.4 23.8
150 181 3502 1.45 9.87 55.0 24.6
153 184 3440 2.35 9.69 57.6 25.6 CG132-22P-225S/M-04G 707
182
180 217 2921 2.75 8.23 57.2 26.2 CF132-22P-225S/M-04G 709
181 219 2896 1.75 8.16 55.0 25.4
211 254 2493 3.25 7.03 56.5 26.7
220 266 2383 2.10 6.71 54.5 26.2
268 323 1959 2.55 5.52 53.5 26.8
316 381 1663 3.00 4.69 52.4 27.2
370 446 1420 3.50 4.00 51.2 27.5

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 109

 PN = 75 kW IE4
50 Hz 60 Hz at 50 Hz

75 kW 90 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
59 71 12092 1.50 25.15 126.5 29.5
71 85 10152 1.80 21.12 129.5 31.3
86 103 8354 2.20 17.38 131.8 32.9
101 121 7108 2.55 14.79 133.1 34.0

C
CG162-22S-280S/M-04E 1171
110 133 6484 1.55 13.49 131.0 33.8 190
CF162-22S-280S/M-04E 1194
117 140 6141 2.95 12.77 133.9 34.9
132 158 5444 2.10 11.33 128.8 34.9
160 192 4480 2.50 9.32 126.0 35.9
188 226 3811 3.00 7.93 123.2 36.6
60 73 11840 1.10 24.63 85.6 15.6
70 85 10169 1.30 21.15 88.3 17.3
85 102 8460 1.55 17.60 89.9 19.0
102 123 7020 1.90 14.60 90.8 20.5
106 128 6752 1.25 14.05 86.5 19.2
122 147 5854 2.25 12.18 90.7 21.6
124 148 5799 1.40 12.06 86.6 20.4 CG142-22S-280S/M-04E 953
186
142 171 5032 2.60 10.47 89.9 22.5 CF142-22S-280S/M-04E 971
148 178 4825 1.90 10.04 86.5 21.6
164 198 4355 3.00 9.06 88.8 23.1
179 215 4003 2.30 8.33 85.3 22.6
215 258 3338 2.75 6.94 83.6 23.4
250 300 2869 3.20 5.97 82.0 24.0
288 347 2483 3.60 5.17 80.3 24.4
74 89 9644 0.85 20.06 35.8 18.5
86 103 8330 1.00 17.33 40.2 20.0
104 125 6889 1.20 14.33 44.5 21.6
126 152 5669 1.45 11.79 47.5 23.0
130 157 5491 0.95 11.42 43.7 21.8
151 182 4743 1.05 9.87 45.6 22.8
154 185 4660 1.75 9.69 49.3 24.2 CG132-22S-280S/M-04E 811
182
181 218 3956 2.05 8.23 50.2 25.0 CF132-22S-280S/M-04E 813
183 219 3923 1.30 8.16 47.2 24.0
212 255 3377 2.40 7.03 50.5 25.6
222 267 3228 1.55 6.71 48.0 25.0
270 324 2653 1.90 5.52 48.2 25.8
318 382 2253 2.20 4.69 47.9 26.3
373 448 1923 2.60 4.00 47.3 26.8

Legend see page 29

110 WG20 Gear Units and Geared Motors www.weg.net

 PN = 90 kW IE4
50 Hz 60 Hz at 50 Hz

90 kW 108 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
59 71 14529 1.25 25.15 121.9 27.3
70 85 12199 1.50 21.12 126.3 29.4
86 103 10039 1.80 17.38 128.4 31.4
101 121 8541 2.15 14.79 128.5 32.7
110
116
132
140
7791
7379
1.30
2.45
13.49
12.77
122.1
128.1
32.5
33.8
CG162-22S-280S/M-04F 1373
190
C
CF162-22S-280S/M-04F 1396
131 158 6542 1.75 11.33 121.7 33.8
134 161 6422 2.85 11.12 126.6 34.7
160 192 5383 2.10 9.32 119.9 34.9
188 225 4580 2.50 7.93 117.9 35.8
217 261 3957 2.85 6.85 115.9 36.4
60 73 14227 0.95 24.63 71.8 13.2
70 84 12219 1.10 21.15 76.5 15.3
85 101 10166 1.30 17.60 80.0 17.3
102 122 8435 1.55 14.60 82.7 19.0
106 127 8113 1.05 14.05 77.7 17.5
122 147 7035 1.85 12.18 83.9 20.4
123 148 6968 1.20 12.06 79.4 18.9 CG142-22S-280S/M-04F 1155
186
142 171 6046 2.20 10.47 84.0 21.4 CF142-22S-280S/M-04F 1173
148 178 5797 1.60 10.04 80.2 20.4
164 197 5233 2.50 9.06 83.7 22.3
179 214 4810 1.90 8.33 80.1 21.6
214 257 4011 2.30 6.94 79.4 22.6
249 299 3448 2.65 5.97 78.4 23.3
288 346 2984 3.00 5.17 77.1 23.8

Legend see page 29

www.weg.net WG20 Gear Units and Geared Motors 111

 PN = 110 kW IE4
50 Hz 60 Hz at 50 Hz

110 kW 132 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
59 71 17758 1.05 25.15 104.7 24.4
70 85 14910 1.25 21.12 111.2 27.0
86 103 12269 1.50 17.38 115.0 29.4
101 121 10438 1.75 14.79 117.1 31.0

C 110
116
132
140
9522
9018
1.10
2.00
13.49
12.77
110.3
118.3
30.7
32.3 CG162-22S-280S/M-04G 1373
190
131 158 7995 1.45 11.33 111.8 32.3 CF162-22S-280S/M-04G 1396
134 161 7849 2.30 11.12 118.0 33.4
160 192 6579 1.75 9.32 111.7 33.7
188 225 5597 2.05 7.93 111.0 34.7
217 261 4836 2.35 6.85 109.9 35.5
250 300 4209 2.70 5.96 108.3 36.2

Legend see page 29

112 WG20 Gear Units and Geared Motors www.weg.net

Selection tables - Gear units
Structure of the selection tables

1 2 3 4 5 6
IEC motor frame size 7
63 71 80 90 100 112 132 160 180 200 225 - 280

IEC adapter 8
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 I225 I250 I280
C
NEMA adapter 9
N213/ N254/ N284/ N324/
N56 N143/145 N182 N184 N364 - -
[Nm] [min-1] [min-1] 215 256 286 326
C002

2 stages 10

n1=1400 min-1
11

Maximum torque
50 Nm 12

1 2 13 15
SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size 14 n1max
[mm] 16

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110

1 Type of gear unit

2 Total ratio
3 Permissible output torque at S1 operation (fB = 1.0)
4 Output speed (gear unit) at n1 = 1400 min-1
5 Exact mathematical ratio
6 Maximum permissible input speed gear unit, valid for direct mounting and IEC / NEMA adapter
Max. perm. input speed IEC / NEMA adapter: I63 - I132 / N56 - N213 = 3000 min-1, I160 - I280 / N254 - N364 = 2500 min-1
Max. perm. motor speed (Direct mounting): motor frame size 63 - 180 = 3000 min-1, 200 - 280 = 2500 min-1.
Higher motor speed on request
7 Possible motor frame sizes (Direct mounting)
8 Possible IEC adapter sizes
9 Possible NEMA adapter sizes
10 Number of gear stages
11 Motor speed
12 Maximum torque
13 Maximum input speed - SERVO adapter
14 Possible SERVO adapter sizes
15 Maximum input speed - direct mounting, IEC / NEMA adapter and input unit
Higher input speeds on request
16 Possible input shafts of the input unit

www.weg.net WG20 Gear Units and Geared Motors 113

 IEC motor frame size

63 71 80 90 - - - - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 - - - - - - - - - -

NEMA adapter

N56 - - - - - - - - - -
[Nm] [min-1] [min-1]
C002 47.44 50 30 759/16 6000
42.34 50 33 1863/44 6000
36.85 50 38 737/20 6000
C 32.89 50 43 1809/55 6000
29.33 50 48 88/3 6000
26.18 50 53 288/11 6000
23.00 50 61 23/1 6000
20.53 50 68 2484/121 6000
17.29 50 81 121/7 6000
2 stages 16.86 31 83 2967/176 6000
15.43 50 91 108/7 6000
13.54 50 103 176/13 5200
n1=1400 min-1
13.10 43 107 2881/220 6000
12.08 50 116 1728/143 5200
Maximum torque 10.42 45 134 344/33 6000
50 Nm 9.97 50 140 319/32 4200
8.90 50 157 783/88 4200
8.17 45 171 989/121 6000
6.88 49 204 55/8 3400
6.14 42 228 43/7 6000
6.14 50 228 135/22 3400
4.81 39 291 688/143 5200
3.54 35 395 1247/352 4200
2.44 31 573 215/88 3400
C012 66.50 85 21 133/2 6000
59.59 85 23 1311/22 6000
51.80 85 27 259/5 6000 *
46.42 85 30 2553/55 6000 *
42.00 85 33 42/1 6000 *
37.64 85 37 414/11 6000 *
33.09 85 42 364/11 6000 *
29.65 85 47 3588/121 6000 *
25.50 85 55 51/2 6000 *
25.05 41 56 551/22 6000
22.85 85 61 3519/154 6000 *
19.92 85 70 259/13 5800 *
2 stages 19.51 66 72 1073/55 6000 *
17.85 85 78 2553/143 5800 *
15.82 66 89 174/11 6000 *
n1=1400 min-1
14.88 85 94 119/8 4700 *
13.33 85 105 1173/88 4700 *
Maximum torque 12.83 85 109 77/6 4200 *
85 Nm 12.46 66 112 1508/121 6000 *
11.50 85 122 23/2 4200 *
11.20 84 125 56/5 3800 *
10.04 81 139 552/55 3800 *
9.60 66 146 1479/154 6000 *
8.22 76 170 189/23 3300 *
7.50 66 187 1073/143 5800 *
7.36 74 190 81/11 3300 *
5.60 66 250 493/88 4700 *
4.83 66 290 29/6 4200 *
4.22 66 332 232/55 3800 *
3.09 63 452 783/253 3300 *

* Only direct mounting of motor possible

Legend see page 113

114 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C002 47.44 5000 -
42.34 5000 -
36.85 5000 3000
32.89 5000 3000 C
29.33 5000 3000
26.18 5000 3000
23.00 5000 3000
20.53 5000 3000
17.29 5000 3000
16.86 5000 -
15.43 5000 3000
13.54 5000 3000
13.10 5000 3000
12.08 5000 3000
10.42 5000 3000
9.97 4200 3000
8.90 4200 3000
8.17 5000 3000
6.88 3400 3000
6.14 5000 3000
6.14 3400 3000
4.81 5000 3000
3.54 4200 3000
2.44 3400 3000
C012 66.50 5000 -
59.59 5000 -
51.80 5000 3000
46.42 5000 3000
42.00 5000 3000
37.64 5000 3000
33.09 5000 3000
29.65 5000 3000
25.50 5000 3000
25.05 5000 -
22.85 5000 3000
19.92 5000 3000
19.51 5000 3000
17.85 5000 3000
15.82 5000 3000
14.88 4700 3000
13.33 4700 3000
12.83 4200 3000
12.46 5000 3000
11.50 4200 3000
11.20 3800 3000
10.04 3800 3000
9.60 5000 3000
8.22 3300 3000
7.50 5000 3000
7.36 3300 3000
5.60 4700 3000
4.83 4200 3000
4.22 3800 3000
3.09 3300 3000

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 115

 IEC motor frame size

63 71 80 90 100 - - - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 - - - - - - - - -

NEMA adapter

N56 N143/145 - - - - - - - - -
[Nm] [min-1] [min-1]
C032 42.88 184 33 2573/60 6000
38.95 168 36 5063/130 6000
34.88 200 40 279/8 6000
C 31.67 200 44 1647/52 6000
27.71 200 51 1829/66 6000
25.17 200 56 3599/143 6000
24.03 103 58 913/38 6000
21.40 200 65 899/42 6000 *
20.95 90 67 4399/210 6000
19.54 128 72 1485/76 6000
19.44 200 72 1769/91 6000 *
17.09 200 82 1333/78 6000 *
17.04 112 82 477/28 6000
15.53 130 90 295/19 6000
15.52 200 90 2623/169 6000 *
2 stages 13.54 114 103 3127/231 6000
12.92 194 108 155/12 5200 *
11.99 130 117 1595/133 6000 *
n1=1400 min-1
11.73 198 119 305/26 5200 *
10.46 114 134 1537/147 6000 *
Maximum torque 9.82 180 143 589/60 4200 *
200 Nm 9.57 130 146 2365/247 6000 *
8.92 183 157 1159/130 4200 *
8.35 114 168 2279/273 6000 *
7.64 169 183 527/69 3600 *
7.24 130 193 275/38 5200 *
6.94 171 202 2074/299 3600 *
6.31 114 222 265/42 5200 *
5.96 158 235 155/26 3200 *
5.50 130 255 11/2 4200 *
5.41 159 259 915/169 3200 *
4.80 114 292 1007/210 4200 *
4.28 130 327 1870/437 3600 *
3.73 114 375 1802/483 3600 *
3.34 130 419 825/247 3200 *
2.91 106 481 265/91 3200 *
C033 286.32 200 4.9 20615/72 6000
260.03 200 5.4 40565/156 6000
223.03 200 6.3 8029/36 6000
202.55 200 6.9 15799/78 6000
180.83 200 7.7 1085/6 6000
164.23 200 8.5 2135/13 6000
142.47 200 9.8 14105/99 6000
3 stages 129.39 200 11 4270/33 6000
109.79 200 13 2635/24 6000
99.71 200 14 5185/52 6000
n1=1400 min-1
85.78 200 16 40145/468 6000
77.90 200 18 78995/1014 6000
Maximum torque 64.05 200 22 18445/288 5200
200 Nm 58.17 200 24 36295/624 5200
55.25 200 25 11935/216 4600
50.18 200 28 23485/468 4600
48.22 200 29 434/9 4200
43.79 200 32 1708/39 4200
35.38 200 40 3255/92 3600
32.13 200 44 19215/598 3600

* Only direct mounting of motor possible

Legend see page 113

116 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C032 42.88 5000 3000
38.95 5000 3000
34.88 5000 3000
31.67 5000 3000 C
27.71 5000 3000
25.17 5000 3000
24.03 5000 3000
21.40 5000 3000
20.95 5000 3000
19.54 5000 3000
19.44 5000 3000
17.09 5000 3000
17.04 5000 3000
15.53 5000 3000
15.52 5000 3000
13.54 5000 3000
12.92 5000 3000
11.99 5000 3000
11.73 5000 3000
10.46 5000 3000
9.82 4200 3000
9.57 5000 3000
8.92 4200 3000
8.35 5000 3000
7.64 3600 3000
7.24 5000 3000
6.94 3600 3000
6.31 5000 3000
5.96 3200 3000
5.50 4200 3000
5.41 3200 3000
4.80 4200 3000
4.28 3600 3000
3.73 3600 3000
3.34 3200 3000
2.91 3200 3000
C033 286.32 5000 -
260.03 5000 -
223.03 5000 3000
202.55 5000 3000
180.83 5000 3000
164.23 5000 3000
142.47 5000 3000
129.39 5000 3000
109.79 5000 3000
99.71 5000 3000
85.78 5000 3000
77.90 5000 3000
64.05 5000 3000
58.17 5000 3000
55.25 4600 3000
50.18 4600 3000
48.22 4200 3000
43.79 4200 3000
35.38 3600 3000
32.13 3600 3000

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 117

 IEC motor frame size

63 71 80 90 100 112 132 - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 - - - - - - -

NEMA adapter

N56 N143/145 N182 N184 - - - - - - -

[Nm] [min-1] [min-1]
C052 58.85 250 24 1177/20 6000
53.50 227 26 107/2 6000
48.13 337 29 385/8 6000
C 43.75 307 32 175/4 6000
38.00 400 37 38/1 6000
35.67 151 39 107/3 6000
34.55 400 41 380/11 6000
31.03 132 45 3103/100 6000
29.46 400 48 825/28 6000 *
29.17 204 48 175/6 6000
26.79 400 52 375/14 6000 *
25.38 178 55 203/8 6000
24.12 400 58 627/26 6000 *
23.03 267 61 760/33 6000
21.92 400 64 285/13 6000 *
20.04 232 70 1102/55 6000
18.56 400 75 297/16 6000 *
17.86 267 78 125/7 6000 *
16.88 400 83 135/8 6000 *
15.54 232 90 435/28 6000 *
14.62 267 96 190/13 6000 *
14.03 400 100 561/40 4800 *
12.75 400 110 51/4 4800 *
2 stages 12.72 232 110 1653/130 6000 *
11.48 400 122 264/23 4200 *
11.25 267 124 45/4 6000 *
n1=1400 min-1
10.43 400 134 240/23 4200 *
9.79 232 143 783/80 6000 *
Maximum torque 9.31 400 150 121/13 3700 *
400 Nm 8.50 267 165 17/2 4800 *
8.46 377 165 110/13 3700 *
7.79 400 180 187/24 3300 *
7.40 232 189 1479/200 4800 *
7.08 333 198 85/12 3300 *
6.96 267 201 160/23 4200 *
6.31 337 222 341/54 3000 *
6.09 324 230 341/56 2900 *
6.05 232 231 696/115 4200 *
5.74 288 244 155/27 3000 *
5.64 267 248 220/39 3700 *
5.54 281 253 155/28 2900 *
4.91 232 285 319/65 3700 *
4.78 248 293 110/23 2600 *
4.72 259 296 85/18 3300 *
4.35 238 322 100/23 2600 *
4.11 205 341 493/120 3300 *
3.83 208 366 310/81 3000 *
3.69 200 379 155/42 2900 *
3.33 174 420 899/270 3000 *
3.21 169 436 899/280 2900 *
2.90 155 483 200/69 2600 *
2.52 140 555 58/23 2600 *
* Only direct mounting of motor possible

Legend see page 113

118 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C052 58.85 5000 3000
53.50 5000 3000
48.13 5000 3000
43.75 5000 3000 C
38.00 5000 3000
35.67 5000 3000
34.55 5000 3000
31.03 5000 3000
29.46 5000 3000
29.17 5000 3000
26.79 5000 3000
25.38 5000 3000
24.12 5000 3000
23.03 5000 3000
21.92 5000 3000
20.04 5000 3000
18.56 5000 3000
17.86 5000 3000
16.88 5000 3000
15.54 5000 3000
14.62 5000 3000
14.03 4800 3000
12.75 4800 3000
12.72 5000 3000
11.48 4200 3000
11.25 5000 3000
10.43 4200 3000
9.79 5000 3000
9.31 3700 3000
8.50 4800 3000
8.46 3700 3000
7.79 3300 3000
7.40 4800 3000
7.08 3300 3000
6.96 4200 3000
6.31 3000 3000
6.09 2900 2900
6.05 4200 3000
5.74 3000 3000
5.64 3700 3000
5.54 2900 2900
4.91 3700 3000
4.78 2300 2300
4.72 3300 3000
4.35 2300 2300
4.11 3300 3000
3.83 3000 3000
3.69 2900 2900
3.33 3000 3000
3.21 2900 2900
2.90 2300 2300
2.52 2300 2300

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 119

 IEC motor frame size

63 71 80 90 - - - - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 - - - - - - - - -

NEMA adapter

N56 N143/145 - - - - - - - - -
[Nm] [min-1] [min-1]
C053 328.43 400 4.3 2299/7 6000
298.57 400 4.7 2090/7 6000
267.93 400 5.2 3751/14 6000
C 243.57 400 5.7 1705/7 6000
213.71 400 6.6 1496/7 6000
194.29 400 7.2 1360/7 6000
165.45 400 8.5 8107/49 6000
3 stages 150.41 400 9.3 7370/49 6000
132.97 400 11 12100/91 6000
120.88 400 12 11000/91 6000
n1=1400 min-1
101.55 400 14 5687/56 6000
92.32 400 15 2585/28 6000
Maximum torque 77.79 400 18 1089/14 4800
400 Nm 70.71 400 20 495/7 4800
61.63 400 23 9922/161 4200
56.02 400 25 9020/161 4200
49.20 400 28 4477/91 3700
44.73 400 31 4070/91 3700
40.33 400 35 121/3 3300
36.67 400 38 110/3 3300

Legend see page 113

120 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C053 328.43 5000 3000
298.57 5000 3000
267.93 5000 3000
243.57 5000 3000 C
213.71 5000 3000
194.29 5000 3000
165.45 5000 3000
150.41 5000 3000
132.97 5000 3000
120.88 5000 3000
101.55 5000 3000
92.32 5000 3000
77.79 4800 3000
70.71 4800 3000
61.63 4200 3000
56.02 4200 3000
49.20 3700 3000
44.73 3700 3000
40.33 3300 3000
36.67 3300 3000

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 121

 IEC motor frame size

63 71 80 90 100 112 132 - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 - - - - - - -

NEMA adapter

N56 N143/145 N182 N184 - - - - - - -

[Nm] [min-1] [min-1]
C062 60.00 420 23 60/1 6000
55.02 385 25 3081/56 6000
47.55 600 29 6800/143 6000
C 43.60 563 32 6715/154 6000
36.92 600 38 480/13 6000 *
33.86 600 41 237/7 6000 *
33.43 234 42 234/7 6000
30.30 600 46 5120/169 6000 *
29.67 208 47 1365/46 6000
27.78 600 50 2528/91 6000 *
26.49 342 53 2040/77 6000
23.52 303 60 5950/253 6000
23.46 600 60 305/13 6000 *
21.51 600 65 4819/224 6000 *
20.57 377 68 144/7 6000 *
18.26 335 77 420/23 6000 *
17.85 600 78 232/13 5100 *
16.88 377 83 1536/91 6000 *
16.36 600 86 2291/140 5100 *
14.98 335 93 4480/299 6000 *
14.72 600 95 4400/299 4500 *
13.49 600 104 4345/322 4500 *
13.07 377 107 183/14 6000 *
2 stages 12.07 600 116 2040/169 3900 *
11.60 335 121 2135/184 6000 *
11.07 600 126 4029/364 3900 *
n1=1400 min-1
10.26 600 137 400/39 3600 *
9.94 377 141 348/35 5100 *
Maximum torque 9.40 592 149 395/42 3600 *
600 Nm 8.83 335 159 203/23 5100 *
8.43 575 166 2960/351 3200 *
8.20 377 171 1320/161 4500 *
8.13 559 172 740/91 3100 *
7.73 517 181 2923/378 3200 *
7.46 505 188 2923/392 3100 *
7.28 335 192 3850/529 4500 *
6.73 377 208 612/91 3900 *
6.69 481 209 2000/299 2800 *
6.13 441 228 1975/322 2800 *
5.97 335 235 1785/299 3900 *
5.71 377 245 40/7 3600 *
5.66 423 247 368/65 2600 *
5.19 393 270 1817/350 2600 *
5.07 335 276 350/69 3600 *
4.70 341 298 296/63 3200 *
4.53 332 309 222/49 3100 *
4.17 300 336 2590/621 3200 *
4.02 292 348 185/46 3100 *
3.73 284 376 600/161 2800 *
3.31 252 423 1750/529 2800 *
3.15 249 444 552/175 2600 *
2.80 222 500 14/5 2600 *
* Only direct mounting of motor possible

Legend see page 113

122 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C062 60.00 5000 3000
55.02 5000 3000
47.55 5000 3000
43.60 5000 3000 C
36.92 5000 3000
33.86 5000 3000
33.43 5000 3000
30.30 5000 3000
29.67 5000 3000
27.78 5000 3000
26.49 5000 3000
23.52 5000 3000
23.46 5000 3000
21.51 5000 3000
20.57 5000 3000
18.26 5000 3000
17.85 5000 3000
16.88 5000 3000
16.36 5000 3000
14.98 5000 3000
14.72 4500 3000
13.49 4500 3000
13.07 5000 3000
12.07 3900 3000
11.60 5000 3000
11.07 3900 3000
10.26 3600 3000
9.94 5000 3000
9.40 3600 3000
8.83 5000 3000
8.43 3200 3000
8.20 4500 3000
8.13 3100 3000
7.73 3200 3000
7.46 3100 3000
7.28 4500 3000
6.73 3900 3000
6.69 2800 2800
6.13 2800 2800
5.97 3900 3000
5.71 3600 3000
5.66 2600 2600
5.19 2600 2600
5.07 3600 3000
4.70 3200 3000
4.53 3100 3000
4.17 3200 3000
4.02 3100 3000
3.73 2800 2800
3.31 2800 2800
3.15 2600 2600
2.80 2600 2600

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 123

 IEC motor frame size

63 71 80 90 100 112 - - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 - - - - - - -

NEMA adapter

N56 N143/145 N182 N184 - - - - - - -

[Nm] [min-1] [min-1]
C063 375.71 600 3.7 83032/221 6000
344.51 600 4.1 819941/2380 6000
307.24 600 4.6 67900/221 6000
C 281.73 600 5.0 38315/136 6000
242.60 600 5.8 589760/2431 6000
222.46 600 6.3 291194/1309 6000
188.11 600 7.4 291000/1547 6000
172.49 600 8.1 574725/3332 6000
3 stages 153.96 600 9.1 442320/2873 6000
141.17 600 9.9 436791/3094 6000
118.51 600 12 26190/221 6000
n1=1400 min-1
108.67 600 13 206901/1904 6000
89.54 600 16 1164/13 5100
Maximum torque 82.10 600 17 22989/280 5100
600 Nm 73.28 600 19 372480/5083 4500
67.19 600 21 183912/2737 4500
59.42 600 24 170720/2873 3900
54.49 600 26 84293/1547 3900
49.74 600 28 1940/39 3600
45.61 600 31 7663/168 3600
30.53 600 46 155200/5083 2800
28.00 600 50 76630/2737 2800

Legend see page 113

124 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C063 375.71 5000 3000
344.51 5000 3000
307.24 5000 3000
281.73 5000 3000 C
242.60 5000 3000
222.46 5000 3000
188.11 5000 3000
172.49 5000 3000
153.96 5000 3000
141.17 5000 3000
118.51 5000 3000
108.67 5000 3000
89.54 5000 3000
82.10 5000 3000
73.28 4500 3000
67.19 4500 3000
59.42 3900 3000
54.49 3900 3000
49.74 3600 3000
45.61 3600 3000
30.53 2500 2500
28.00 2500 2500

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 125

 IEC motor frame size

63 71 80 90 100 112 132 160 - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 - - - - - -

NEMA adapter

N213/
N56 N143/145 N182 N184 - - - - - -
[Nm] [min-1] [min-1] 215
C072 38.92 820 36 506/13 6000
35.41 820 40 5984/169 6000
30.55 820 46 1955/64 6000
C 27.79 820 50 1445/52 6000
23.58 802 59 943/40 5400
21.45 780 65 1394/65 5400
20.65 686 68 1342/65 6000
19.50 757 72 39/2 4700
19.02 632 74 5192/273 6000
17.74 736 79 408/23 4700
16.59 720 84 1725/104 4200
16.20 671 86 1037/64 6000
15.09 700 93 2550/169 4200
14.93 632 94 5015/336 6000
14.38 689 97 115/8 3700 *
13.08 670 107 170/13 3700 *
12.51 618 112 2501/200 5400
12.14 654 115 437/36 3300 *
11.71 647 120 1311/112 3200
11.52 632 122 2419/210 5400
11.04 637 127 1292/117 3300 *
2 stages 10.65 630 131 969/91 3200
10.34 582 135 2379/230 4700
10.00 617 140 10/1 2900 *
n1=1400 min-1
9.53 622 147 1534/161 4700
9.10 600 154 2720/299 2900 *
Maximum torque 8.80 552 159 915/104 4200
820 Nm 8.18 580 171 851/104 2600 *
8.10 581 173 1475/182 4200
7.63 528 184 61/8 3700 *
7.44 564 188 1258/169 2600 *
7.02 547 199 295/42 3700 *
6.75 547 207 27/4 2300 *
6.44 500 217 1159/180 3300 *
6.21 494 225 3477/560 3200
6.14 532 228 1836/299 2300 *
5.93 510 236 1121/189 3300 *
5.72 502 245 1121/196 3200
5.31 508 264 69/13 2100 *
5.30 470 264 122/23 2900 *
4.89 470 287 2360/483 2900 *
4.83 495 290 816/169 2100 *
4.34 441 323 2257/520 2600 *
4.00 432 350 2183/546 2600 *
3.58 415 391 1647/460 2300 *
3.30 398 424 531/161 2300 *
2.82 384 497 183/65 2100 *
2.59 360 540 236/91 2100 *
* Only direct mounting of motor possible

Legend see page 113

126 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C072 38.92 5000 2500
35.41 5000 2500
30.55 5000 2500
27.79 5000 2500 C
23.58 5000 2500
21.45 5000 2500
20.65 5000 2500
19.50 4700 2500
19.02 5000 2500
17.74 4700 2500
16.59 4200 2500
16.20 5000 2500
15.09 4200 2500
14.93 5000 2500
14.38 3700 2500
13.08 3700 2500
12.51 5000 2500
12.14 3300 2500
11.71 3200 2500
11.52 5000 2500
11.04 3300 2500
10.65 3200 2500
10.34 4700 2500
10.00 2900 2500
9.53 4700 2500
9.10 2900 2500
8.80 4200 2500
8.18 2600 2500
8.10 4200 2500
7.63 3700 2500
7.44 2600 2500
7.02 3700 2500
6.75 2300 2300
6.44 3300 2500
6.21 3200 2500
6.14 2300 2300
5.93 3300 2500
5.72 3200 2500
5.31 - 2100
5.30 2900 2500
4.89 2900 2500
4.83 - 2100
4.34 2600 2500
4.00 2600 2500
3.58 2300 2300
3.30 2300 2300
2.82 - 2100
2.59 - 2100

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 127

 IEC motor frame size

63 71 80 90 100 112 132 - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 - - - - - -

NEMA adapter

N213/
N56 N143/145 N182 N184 - - - - - -
[Nm] [min-1] [min-1] 215
C073 351.33 820 4.0 14053/40 6000
319.60 820 4.4 1598/5 6000
278.44 820 5.0 18377/66 6000
C 253.30 820 5.5 108664/429 6000
216.20 820 6.5 1081/5 6000
196.68 820 7.1 12784/65 6000
177.39 820 7.9 34592/195 6000
161.38 820 8.7 409088/2535 6000
137.38 820 10 65941/480 6000
124.97 820 11 48739/390 6000
3 stages 104.50 820 13 31349/300 5400
95.06 820 15 92684/975 5400
86.17 820 16 517/6 4700
n1=1400 min-1
78.39 820 18 70312/897 4700
70.68 820 20 18377/260 4200
Maximum torque 64.30 820 22 54332/845 4200
820 Nm 60.06 820 23 1081/18 3700
54.63 820 26 6392/117 3700
49.38 820 28 39997/810 3300
47.62 819 29 39997/840 3200
44.92 794 31 236504/5265 3300
43.32 782 32 59126/1365 3200
39.17 765 36 235/6 2900
35.63 726 39 31960/897 2900
33.15 722 42 24863/750 2700
30.16 680 46 147016/4875 2700

Legend see page 113

128 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C073 351.33 5000 3000
319.60 5000 3000
278.44 5000 3000
253.30 5000 3000 C
216.20 5000 2500
196.68 5000 2500
177.39 5000 2500
161.38 5000 2500
137.38 5000 2500
124.97 5000 2500
104.50 5000 2500
95.06 5000 2500
86.17 4700 2500
78.39 4700 2500
70.68 4200 2500
64.30 4200 2500
60.06 3700 2500
54.63 3700 2500
49.38 3300 2500
47.62 3200 2500
44.92 3300 2500
43.32 3200 2500
39.17 2900 2500
35.63 2900 2500
33.15 2700 2500
30.16 2700 2500

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 129

 IEC motor frame size

63 71 80 90 100 112 132 160 180 - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 - - - - -

NEMA adapter

N213/ N254/
N56 N143/145 N182 N184 - - - - -
[Nm] [min-1] [min-1] 215 256
C082 54.18 1550 26 4930/91 6000
42.88 1550 33 9605/224 6000
37.44 1550 37 3145/84 6000
C 33.09 1550 42 1853/56 6000
31.23 1117 45 406/13 6000
27.98 1549 50 4505/161 5200
27.88 997 50 725/26 6000
24.72 1120 57 791/32 6000
24.05 1479 58 8755/364 4600
22.07 1000 63 2825/128 6000
21.58 1316 65 259/12 6000
21.00 1418 67 7055/336 4200
19.27 1175 73 925/48 6000
19.08 1306 73 763/40 6000
17.99 1353 78 3400/189 3700 *
17.35 1338 81 850/49 3600
17.03 1160 82 545/32 6000
16.13 1298 87 371/23 5200
15.31 1288 91 2465/161 3300 *
14.40 1088 97 1325/92 5200
2 stages
13.87 1233 101 721/52 4600
12.84 1220 109 4675/364 2900 *
n1=1400 min-1 12.38 1026 113 2575/208 4600
12.10 1177 116 581/48 4200
10.82 1158 129 3485/322 2600 *
Maximum torque
10.81 974 130 2075/192 4200
1550 Nm
10.37 1117 135 280/27 3700 *
10.00 1103 140 10/1 3600
9.26 918 151 250/27 3700 *
8.93 906 157 125/14 3600
8.87 1090 158 1615/182 2300 *
8.83 1057 159 203/23 3300 *
7.88 863 178 725/92 3300 *
7.40 996 189 385/52 2900 *
7.04 1015 199 493/70 2000 *
6.61 807 212 1375/208 2900 *
6.24 939 224 287/46 2600 *
5.57 756 251 1025/184 2600 *
5.23 927 267 2125/406 1700 *
5.12 878 274 133/26 2300 *
4.57 701 307 475/104 2300 *
4.06 812 345 203/50 2000 *
3.63 641 386 29/8 2000 *
3.02 734 464 175/58 1700 *
2.69 572 520 625/232 1700 *
C083 368.94 1550 3.8 909075/2464 6000
284.84 1550 4.9 893265/3136 6000
238.89 1550 5.9 86955/364 6000
187.48 1550 7.5 671925/3584 6000
3 stages
144.69 1550 9.7 64821/448 6000
119.68 1550 12 308295/2576 5200
n 1=1400 min-1 101.80 1550 14 592875/5824 4600
88.23 1550 16 39525/448 4200
74.50 1550 19 50065/672 3700
Maximum torque
71.84 1550 19 450585/6272 3600
1550 Nm
61.37 1550 23 39525/644 3300
50.22 1550 28 292485/5824 2900
41.43 1550 34 213435/5152 2600

* Only direct mounting of motor possible

Legend see page 113

130 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C082 54.18 5000 2500
42.88 5000 2500
37.44 5000 2500
33.09 5000 2500 C
31.23 5000 2500
27.98 5000 2500
27.88 5000 2500
24.72 5000 2500
24.05 4600 2500
22.07 5000 2500
21.58 5000 2500
21.00 4200 2500
19.27 5000 2500
19.08 5000 2500
17.99 3700 2500
17.35 3600 2500
17.03 5000 2500
16.13 5000 2500
15.31 3300 2500
14.40 5000 2500
13.87 4600 2500
12.84 2900 2500
12.38 4600 2500
12.10 4200 2500
10.82 2600 2500
10.81 4200 2500
10.37 3700 2500
10.00 3600 2500
9.26 3700 2500
8.93 3600 2500
8.87 - 2300
8.83 3300 2500
7.88 3300 2500
7.40 2900 2500
7.04 - 2000
6.61 2900 2500
6.24 2600 2500
5.57 2600 2500
5.23 - 1700
5.12 - 2300
4.57 - 2300
4.06 - 2000
3.63 - 2000
3.02 - 1700
2.69 - 1700
C083 368.94 5000 3000
284.84 5000 2500
238.89 5000 2500
187.48 5000 2500
144.69 5000 2500
119.68 5000 2500
101.80 4600 2500
88.23 4200 2500
74.50 3700 2500
71.84 3600 2500
61.37 3300 2500
50.22 2900 2500
41.43 2600 2500
32.58 - 2300

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 131

 IEC motor frame size

63 71 80 90 100 112 132 160 180 200 - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 I180 - - - -

NEMA adapter

N213/ N254/ N284/

N56 N143/145 N182 N184 - - - -
[Nm] [min-1] [min-1] 215 256 286
C092 39.60 2970 35 198/5 6000
33.48 2992 42 770/23 5900
28.98 2981 48 1507/52 5200
C 25.67 3000 55 77/3 4700
22.58 1694 62 1242/55 6000
22.20 3000 63 1199/54 4200
21.41 2569 65 1199/56 4000
20.10 1508 70 201/10 6000
19.09 1706 73 210/11 5900
18.89 3000 74 869/46 3700
16.99 1519 82 2345/138 5900
16.53 1700 85 9453/572 5200
16.08 3000 87 209/13 3200 *
14.71 1513 95 9179/624 5200
14.64 1819 96 161/11 4700
13.87 3000 101 319/23 2900 *
13.03 1619 107 469/36 4700
2 stages
12.66 1819 111 2507/198 4200
12.21 1465 115 7521/616 4000
n1=1400 min-1 11.63 2990 120 605/52 2600 *
11.27 1619 124 7303/648 4200
10.87 1304 129 7303/672 4000
Maximum torque
10.77 1819 130 237/22 3700
3000 Nm
9.59 1619 146 5293/552 3700
9.46 2805 148 473/50 2200 *
9.17 1819 153 1311/143 3200 *
8.16 1619 172 1273/156 3200 *
7.91 1819 177 87/11 2900 *
7.40 2600 189 429/58 1900 *
7.04 1619 199 1943/276 2900 *
6.63 1819 211 345/52 2600 *
5.91 1619 237 3685/624 2600 *
5.89 2424 238 165/28 1700 *
5.39 1819 260 2967/550 2200 *
4.80 1619 292 2881/600 2200 *
4.22 1819 332 2691/638 1900 *
3.75 1619 373 871/232 1900 *
3.36 1819 417 1035/308 1700 *
2.99 1619 468 335/112 1700 *
* Only direct mounting of motor possible

Legend see page 113

132 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C092 39.60 5000 2500
33.48 5000 2500
28.98 5000 2500
25.67 4700 2500 C
22.58 5000 2500
22.20 4200 2500
21.41 4000 2500
20.10 5000 2500
19.09 5000 2500
18.89 3700 2500
16.99 5000 2500
16.53 5000 2500
16.08 3200 2500
14.71 5000 2500
14.64 4700 2500
13.87 2900 2500
13.03 4700 2500
12.66 4200 2500
12.21 4000 2500
11.63 - 2500
11.27 4200 2500
10.87 4000 2500
10.77 3700 2500
9.59 3700 2500
9.46 - 2200
9.17 3200 2500
8.16 3200 2500
7.91 2900 2500
7.40 - 1900
7.04 2900 2500
6.63 - 2500
5.91 - 2500
5.89 - 1700
5.39 - 2200
4.80 - 2200
4.22 - 1900
3.75 - 1900
3.36 - 1700
2.99 - 1700

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 133

 IEC motor frame size

63 71 80 90 100 112 132 160 - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 - - - - -

NEMA adapter

N213/ N254/
N56 N143/145 N182 N184 - - - - -
[Nm] [min-1] [min-1] 215 256
C093 306.73 3000 4.6 7975/26 6000
242.77 3000 5.8 31075/128 6000
211.98 3000 6.6 10175/48 6000
C 187.34 3000 7.5 5995/32 6000
158.42 3000 8.8 14575/92 5900
154.24 3000 9.1 14036/91 6000
136.18 3000 10 28325/208 5200
122.08 3000 11 13673/112 6000
118.88 3000 12 22825/192 4700
106.60 3000 13 4477/42 6000
101.85 3000 14 2750/27 4200
98.21 3000 14 1375/14 4000
3 stages 94.21 3000 15 13189/140 6000
86.68 3000 16 7975/92 3700
79.66 3000 18 12826/161 5900
n1=1400 min-1
72.72 3000 19 15125/208 3200
68.48 3000 20 12463/182 5200
Maximum torque 61.28 3000 23 11275/184 2900
3000 Nm 59.78 3000 23 10043/168 4700
51.22 3000 27 9680/189 4200
50.24 2923 28 5225/104 2600
49.39 2995 28 2420/49 4000
43.59 2859 32 7018/161 3700
39.88 2691 35 319/8 2200
36.57 2677 38 6655/182 3200
30.81 2510 45 4961/161 2900
29.63 2421 47 6875/232 1900
25.26 2331 55 2299/91 2600
20.05 2137 70 3509/175 2200
14.90 1913 94 3025/203 1900

Legend see page 113

134 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C093 306.73 5000 2500
242.77 5000 2500
211.98 5000 2500
187.34 5000 2500 C
158.42 5000 2500
154.24 5000 2500
136.18 5000 2500
122.08 5000 2500
118.88 4700 2500
106.60 5000 2500
101.85 4200 2500
98.21 4000 2500
94.21 5000 2500
86.68 3700 2500
79.66 5000 2500
72.72 3200 2500
68.48 5000 2500
61.28 2900 2500
59.78 4700 2500
51.22 4200 2500
50.24 - 2500
49.39 4000 2500
43.59 3700 2500
39.88 - 2200
36.57 3200 2500
30.81 2900 2500
29.63 - 1900
25.26 - 2500
20.05 - 2200
14.90 - 1900

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 135

 IEC motor frame size

63 71 80 90 100 112 132 - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 - - - - - -

NEMA adapter

N213/
N56 N143/145 N182 N184 - - - - - -
[Nm] [min-1] [min-1] 215
C094 3282.02 3000 0.43 170665/52 6000
2683.89 3000 0.52 279125/104 6000
2597.68 3000 0.54 665005/256 6000
C 2268.18 3000 0.62 217745/96 6000
2124.27 3000 0.66 1087625/512 6000
2119.23 3000 0.66 27550/13 6000
1854.82 3000 0.75 356125/192 6000
1677.34 3000 0.83 53675/32 6000
1643.20 3000 0.85 598125/364 6000
1464.58 3000 0.96 17575/12 6000
1344.90 3000 1.0 454575/338 6000
1300.57 3000 1.1 2330625/1792 6000
1135.60 3000 1.2 254375/224 6000
1064.47 3000 1.3 1771275/1664 6000
1035.22 3000 1.4 215325/208 6000
929.45 3000 1.5 193325/208 6000
819.36 3000 1.7 839025/1024 6000
4 stages
782.16 3000 1.8 81345/104 6000
715.43 3000 2.0 91575/128 6000
n1=1400 min-1 640.13 3000 2.2 191400/299 5900
619.07 3000 2.3 316965/512 6000
540.55 3000 2.6 34595/64 6000
Maximum torque
519.08 3000 2.7 87725/169 5200
3000 Nm
506.66 3000 2.8 93225/184 5900
442.39 3000 3.2 10175/23 5900
434.54 3000 3.2 135575/312 4700
410.85 3000 3.4 341825/832 5200
358.73 3000 3.9 111925/312 5200
352.17 3000 4.0 247225/702 4200
343.93 3000 4.1 528275/1536 4700
339.59 3000 4.1 247225/728 4000
300.30 3000 4.7 172975/576 4700
278.74 3000 5.0 963325/3456 4200
268.78 3000 5.2 963325/3584 4000
266.72 3000 5.2 79750/299 3700
243.38 3000 5.8 315425/1296 4200
234.69 3000 6.0 315425/1344 4000
211.11 3000 6.6 155375/736 3700
184.33 3000 7.6 50875/276 3700

Legend see page 113

136 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C094 3282.02 5000 3000
2683.89 5000 3000
2597.68 5000 3000
2268.18 5000 3000 C
2124.27 5000 3000
2119.23 5000 3000
1854.82 5000 3000
1677.34 5000 3000
1643.20 5000 3000
1464.58 5000 3000
1344.90 5000 3000
1300.57 5000 3000
1135.60 5000 3000
1064.47 5000 3000
1035.22 5000 3000
929.45 5000 3000
819.36 5000 3000
782.16 5000 3000
715.43 5000 3000
640.13 5000 3000
619.07 5000 3000
540.55 5000 3000
519.08 5000 3000
506.66 5000 3000
442.39 5000 3000
434.54 4700 3000
410.85 5000 3000
358.73 5000 3000
352.17 4200 3000
343.93 4700 3000
339.59 4000 3000
300.30 4700 3000
278.74 4200 3000
268.78 4000 3000
266.72 3200 3000
243.38 4200 3000
234.69 4000 3000
211.11 3200 3000
184.33 3200 3000

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 137

 IEC motor frame size

63 71 80 90 100 112 132 160 180 200 - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 I180 - - - -

NEMA adapter

N213/ N254/ N284/

N56 N143/145 N182 N184 - - - -
[Nm] [min-1] [min-1] 215 256 286
C102 33.01 3695 42 6437/195 5700
29.16 4500 48 1312/45 5100
25.31 4500 55 2050/81 4500
C 24.40 2930 57 1025/42 4400
21.87 4500 64 328/15 4000
19.17 2146 73 11461/598 5700
18.71 4500 75 3649/195 3500 *
17.15 1920 82 11147/650 5700
16.93 2698 83 1168/69 5100
16.16 4500 87 5576/345 3200 *
15.15 2414 92 1136/75 5100
14.69 2698 95 9125/621 4500
14.17 1701 99 9125/644 4400
13.67 4500 102 41/3 2800 *
13.15 2414 106 355/27 4500
2 stages 12.70 2698 110 292/23 4000
12.68 1522 110 355/28 4400
11.36 2414 123 284/25 4000
n1=1400 min-1
11.15 4500 126 1394/125 2500 *
10.86 2698 129 6497/598 3500 *
Maximum torque 9.72 2414 144 6319/650 3500 *
4500 Nm 9.38 2698 149 4964/529 3200 *
9.05 4500 155 1312/145 2100 *
8.40 2414 167 4828/575 3200 *
7.93 2698 176 365/46 2800 *
7.22 4500 194 1517/210 1900 *
7.10 2414 197 71/10 2800 *
6.47 2698 216 3723/575 2500 *
6.00 4500 234 2788/465 1700 *
5.79 2414 242 3621/625 2500 *
5.25 2698 266 3504/667 2100 *
4.70 2414 298 3408/725 2100 *
4.19 2698 334 2701/644 1900 *
3.75 2414 373 2627/700 1900 *
3.48 2698 402 2482/713 1700 *
3.11 2414 449 2414/775 1700 *
* Only direct mounting of motor possible

Legend see page 113

138 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C102 33.01 5000 2500
29.16 5000 2500
25.31 4500 2500
24.40 4400 2500 C
21.87 4000 2500
19.17 5000 2500
18.71 3500 2500
17.15 5000 2500
16.93 5000 2500
16.16 3200 2500
15.15 5000 2500
14.69 4500 2500
14.17 4400 2500
13.67 - 2500
13.15 4500 2500
12.70 4000 2500
12.68 4400 2500
11.36 4000 2500
11.15 - 2500
10.86 3500 2500
9.72 3500 2500
9.38 3200 2500
9.05 - 2100
8.40 3200 2500
7.93 - 2500
7.22 - 1900
7.10 - 2500
6.47 - 2500
6.00 - 1700
5.79 - 2500
5.25 - 2100
4.70 - 2100
4.19 - 1900
3.75 - 1900
3.48 - 1700
3.11 - 1700

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 139

 IEC motor frame size

63 71 80 90 100 112 132 160 180 - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 I180 - - - -

NEMA adapter

N213/ N254/ N284/

N56 N143/145 N182 N184 - - - -
[Nm] [min-1] [min-1] 215 256 286
C103 246.43 4500 5.7 141696/575 6000
208.33 4500 6.7 110208/529 6000
180.35 4500 7.8 269616/1495 5700
C 159.72 4500 8.8 18368/115 5100
138.17 4500 10 143008/1035 4500
133.24 4500 11 107256/805 4400
122.02 4500 11 15252/125 6000
117.56 4500 12 310944/2645 4000
103.15 4500 14 35588/345 6000
100.05 4500 14 149568/1495 3500
3 stages 89.30 4500 16 174127/1950 5700
86.31 4500 16 228288/2645 3200
79.08 4500 18 17794/225 5100
n1=1400 min-1
72.40 4500 19 21648/299 2800
68.41 4500 20 138539/2025 4500
Maximum torque 65.97 4500 21 138539/2100 4400
4500 Nm 58.87 4500 24 169248/2875 2500
58.21 4500 24 100409/1725 4000
49.54 4500 28 48298/975 3500
46.03 4500 30 153504/3335 2100
42.74 4500 33 73718/1725 3200
36.67 4500 38 5904/161 1900
35.85 4500 39 13981/390 2800
29.15 4500 48 54653/1875 2500
22.79 4500 61 16523/725 2100
18.16 4500 77 1271/70 1900

Legend see page 113

140 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C103 246.43 5000 2500
208.33 5000 2500
180.35 5000 2500
159.72 5000 2500 C
138.17 4500 2500
133.24 4400 2500
122.02 5000 2500
117.56 4000 2500
103.15 5000 2500
100.05 3500 2500
89.30 5000 2500
86.31 3200 2500
79.08 5000 2500
72.40 - 2500
68.41 4500 2500
65.97 4400 2500
58.87 - 2500
58.21 4000 2500
49.54 3500 2500
46.03 - 2100
42.74 3200 2500
36.67 - 1900
35.85 - 2500
29.15 - 2500
22.79 - 2100
18.16 - 1900

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 141

 IEC motor frame size

63 71 80 90 100 112 132 - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 - - - - - -

NEMA adapter

N213/
N56 N143/145 N182 N184 - - - - - -
[Nm] [min-1] [min-1] 215
C104 2636.78 4500 0.53 7580736/2875 6000
2229.16 4500 0.63 5896128/2645 6000
2156.24 4500 0.65 247968/115 6000
C 1822.91 4500 0.77 964320/529 6000
1702.59 4500 0.82 10768896/6325 6000
1439.39 4500 0.97 8375808/5819 6000
1320.15 4500 1.1 212544/161 6000
1116.07 4500 1.3 590400/529 6000
1080.49 4500 1.3 8076672/7475 6000
913.46 4500 1.5 6281856/6877 6000
4 stages 831.69 4500 1.7 478224/575 6000
703.12 4500 2.0 371952/529 6000
628.39 4500 2.2 1806624/2875 6000
n1=1400 min-1
531.25 4500 2.6 1405152/2645 6000
514.28 4500 2.7 6801408/13225 6000
Maximum torque 434.78 4500 3.2 5289984/12167 6000
4500 Nm 417.03 4500 3.4 3117312/7475 5700
352.56 4500 4.0 2424576/6877 5700
349.11 4500 4.0 200736/575 5100
295.14 4500 4.7 156128/529 5100
282.94 4500 4.9 162688/575 4500
272.83 4500 5.1 1098144/4025 4400
239.20 4500 5.9 1138816/4761 4500
230.65 4500 6.1 122016/529 4400
214.29 4500 6.5 566784/2645 4000
181.16 4500 7.7 2204160/12167 4000

Legend see page 113

142 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C104 2636.78 5000 3000
2229.16 5000 3000
2156.24 5000 3000
1822.91 5000 3000 C
1702.59 5000 3000
1439.39 5000 3000
1320.15 5000 3000
1116.07 5000 3000
1080.49 5000 3000
913.46 5000 3000
831.69 5000 3000
703.12 5000 3000
628.39 5000 3000
531.25 5000 3000
514.28 5000 3000
434.78 5000 3000
417.03 5000 3000
352.56 5000 3000
349.11 5000 3000
295.14 5000 3000
282.94 4500 3000
272.83 4400 3000
239.20 4500 3000
230.65 4400 3000
214.29 3500 3000
181.16 3500 3000

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 143

 IEC motor frame size

63 71 80 90 100 112 132 160 180 200 225 250 280

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 I225 - -

NEMA adapter

N213/ N254/ N284/ N324/

N56 N143/145 N182 N184 N364 - -
[Nm] [min-1] [min-1] 215 256 286 326
C132 35.51 5325 39 2983/84 5600
30.96 5885 45 836/27 5000
29.86 3583 47 209/7 4800
C 26.67 7730 52 4294/161 4400
22.97 8000 61 2090/91 3900
20.22 3032 69 2669/132 5600
20.06 8000 70 3230/161 3500 * *
17.63 3351 79 476/27 5000
17.33 8000 81 1577/91 3100 * *
2 stages 17.00 2040 82 17/1 4800
15.19 4401 92 3842/253 4400
14.33 8000 98 2508/175 2700 * *
n1=1400 min-1
13.08 4884 107 170/13 3900
11.79 8000 119 342/29 2300 * *
Maximum torque 11.42 4945 123 2890/253 3500 * *
8000 Nm 9.87 4945 142 1411/143 3100 * *
9.69 8000 144 475/49 2100 * *
8.23 8000 170 1786/217 1900 * *
8.16 4945 172 204/25 2700 * *
7.03 8000 199 836/119 1800 * *
6.71 4945 208 2142/319 2300 * *
5.52 4945 254 425/77 2100 * *
4.69 4945 299 1598/341 1900 * *
4.00 4945 350 4/1 1800 * *
C133 204.88 8000 6.8 74575/364 6000
180.95 8000 7.7 3800/21 5600
157.08 8000 8.9 59375/378 5000
151.47 8000 9.2 59375/392 4800
135.71 8000 10 950/7 4400
116.14 8000 12 42275/364 3900
101.85 8000 14 259521/2548 6000
100.31 8000 14 16150/161 3500
89.96 8000 16 4408/49 5600
3 stages 84.82 8000 17 2375/28 3100
78.09 8000 18 68875/882 5000
75.30 8000 19 206625/2744 4800
n1=1400 min-1
69.21 8000 20 969/14 2700
67.47 8000 21 3306/49 4400
Maximum torque 57.74 8000 24 147117/2548 3900
8000 Nm 56.16 8000 25 11400/203 2300
49.87 8000 28 56202/1127 3500
44.83 8000 31 17575/392 2100
42.17 8000 33 8265/196 3100
37.21 8000 38 8075/217 1900
34.41 8000 41 84303/2450 2700
27.92 8000 50 1368/49 2300
22.29 8000 63 61161/2744 2100
18.50 8000 76 28101/1519 1900

* Only direct mounting of motor possible

Legend see page 113

144 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C132 35.51 5000 2500
30.96 5000 2500
29.86 5000 2500
26.67 4500 2500 C
22.97 4000 2500
20.22 5000 2500
20.06 3600 1800
17.63 5000 2500
17.33 - 1800
17.00 5000 2500
15.19 4500 2500
14.33 - 1800
13.08 4000 2500
11.79 - 1800
11.42 3600 1800
9.87 - 1800
9.69 - 1800
8.23 - 1800
8.16 - 1800
7.03 - 1800
6.71 - 1800
5.52 - 1800
4.69 - 1800
4.00 - 1800
C133 204.88 5000 2500
180.95 5000 2500
157.08 5000 2500
151.47 5000 2500
135.71 4500 2500
116.14 4000 2500
101.85 5000 2500
100.31 3600 1800
89.96 5000 2500
84.82 - 1800
78.09 5000 2500
75.30 5000 2500
69.21 - 1800
67.47 4500 2500
57.74 4000 2500
56.16 - 1800
49.87 3600 1800
44.83 - 1800
42.17 - 1800
37.21 - 1800
34.41 - 1800
27.92 - 1800
22.29 - 1800
18.50 - 1800

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 145

 IEC motor frame size

63 71 80 90 100 112 132 160 - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 - - - - -

NEMA adapter

N213/ N254/
N56 N143/145 N182 N184 - - - - -
[Nm] [min-1] [min-1] 215 256
C134 1891.77 8000 0.74 437000/231 6000
1642.17 8000 0.85 6828125/4158 6000
1460.54 8000 0.96 214700/147 6000
C 1418.83 8000 0.99 109250/77 6000
1267.83 8000 1.1 6709375/5292 6000
1224.91 8000 1.1 334400/273 6000
1095.41 8000 1.3 53675/49 6000
1063.29 8000 1.3 2612500/2457 6000
961.31 8000 1.5 40375/42 6000
918.68 8000 1.5 83600/91 6000
834.47 8000 1.7 5046875/6048 6000
741.90 8000 1.9 15580/21 6000
720.98 8000 1.9 40375/56 6000
644.01 8000 2.2 486875/756 6000
613.66 8000 2.3 98800/161 6000
556.43 8000 2.5 3895/7 6000
532.69 8000 2.6 771875/1449 6000
521.98 8000 2.7 47500/91 6000
4 stages 460.25 8000 3.0 74100/161 6000
453.11 8000 3.1 1484375/3276 6000
452.38 8000 3.1 9500/21 5600
n1=1400 min-1
392.69 8000 3.6 296875/756 5600
391.48 8000 3.6 35625/91 6000
Maximum torque 382.01 8000 3.7 72200/189 5000
8000 Nm 368.37 8000 3.8 18050/49 4800
339.29 8000 4.1 2375/7 5600
331.61 8000 4.2 1128125/3402 5000
319.76 8000 4.4 1128125/3528 4800
314.70 8000 4.4 152000/483 4400
286.51 8000 4.9 18050/63 5000
276.28 8000 5.1 27075/98 4800
273.18 8000 5.1 1187500/4347 4400
257.51 8000 5.4 70300/273 3900
236.02 8000 5.9 38000/161 4400
223.53 8000 6.3 2196875/9828 3900
212.42 8000 6.6 34200/161 3500
193.13 8000 7.2 17575/91 3900
184.39 8000 7.6 59375/322 3500
167.03 8000 8.4 15200/91 3100
159.32 8000 8.8 25650/161 3500
144.99 8000 9.7 118750/819 3100
125.27 8000 11 11400/91 3100

Legend see page 113

146 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C134 1891.77 5000 3000
1642.17 5000 3000
1460.54 5000 2500
1418.83 5000 3000 C
1267.83 5000 2500
1224.91 5000 2500
1095.41 5000 2500
1063.29 5000 2500
961.31 5000 2500
918.68 5000 2500
834.47 5000 2500
741.90 5000 2500
720.98 5000 2500
644.01 5000 2500
613.66 5000 2500
556.43 5000 2500
532.69 5000 2500
521.98 5000 2500
460.25 5000 2500
453.11 5000 2500
452.38 5000 2500
392.69 5000 2500
391.48 5000 2500
382.01 5000 2500
368.37 5000 2500
339.29 5000 2500
331.61 5000 2500
319.76 5000 2500
314.70 4500 2500
286.51 5000 2500
276.28 5000 2500
273.18 4500 2500
257.51 4000 2500
236.02 4500 2500
223.53 4000 2500
212.42 3600 2500
193.13 4000 2500
184.39 3600 2500
167.03 - 2500
159.32 3600 2500
144.99 - 2500
125.27 - 2500

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 147

 IEC motor frame size

63 71 80 90 100 112 132 160 180 200 225 250 280

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 I225 I250 -

NEMA adapter

N213/ N254/ N284/ N324/

N56 N143/145 N182 N184 N364 - -
[Nm] [min-1] [min-1] 215 256 286 326
C142 37.48 7123 37 1012/27 5000
32.28 9361 43 1485/46 4400
27.92 11759 50 363/13 3900
C 24.63 13000 57 1133/46 3500 *
21.37 4062 66 2116/99 5000
21.15 13000 66 275/13 3100 *
18.41 5338 76 405/22 4400
2 stages 17.60 13000 80 88/5 2700 *
15.92 6706 88 207/13 3900
14.60 13000 96 847/58 2300 *
n1=1400 min-1
14.05 8155 100 309/22 3500 *
12.18 13000 115 341/28 2100 *
Maximum torque 12.06 8032 116 1725/143 3100 *
13000 Nm 10.47 13000 134 649/62 1900 *
10.04 9095 139 552/55 2700 *
9.06 13000 155 154/17 1800 *
8.33 9017 168 483/58 2300 *
6.94 9095 202 2139/308 2100 *
5.97 9095 235 4071/682 1900 *
5.17 8816 271 966/187 1800 *
C143 206.88 13000 6.8 39721/192 5600
180.38 13000 7.8 19481/108 5000
173.94 13000 8.0 2783/16 4800
155.38 13000 9.0 1243/8 4400
133.80 13000 10 13915/104 3900
116.88 13000 12 935/8 3500 x
113.27 13000 12 146795/1296 5600
100.96 13000 14 20999/208 3100 x
98.76 13000 14 71995/729 5000
3 stages 95.23 11428 15 10285/108 4800
85.07 13000 16 105655/1242 4400
83.49 13000 17 8349/100 2700 x
n1=1400 min-1
73.25 13000 19 51425/702 3900
68.70 13000 20 15939/232 2300 x
Maximum torque 63.99 13000 22 79475/1242 3500 x
13000 Nm 56.47 13000 25 6325/112 2100 x
55.27 13000 25 77605/1404 3100 x
47.95 13000 29 11891/248 1900 x
45.71 13000 31 2057/45 2700 x
40.93 13000 34 2783/68 1800 x
37.61 13000 37 6545/174 2300 x
30.92 12705 45 23375/756 2100 x
26.25 12096 53 43945/1674 1900 x
22.41 11535 62 605/27 1800 x

* Only direct mounting of motor possible

x I250 only. Direct mounting of the motor not possible

148 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C142 37.48 5000 2500
32.28 4500 2500
27.92 4000 2500
24.63 3600 1800 C
21.37 5000 2500
21.15 - 1800
18.41 4500 2500
17.60 - 1800
15.92 4000 2500
14.60 - 1800
14.05 3600 1800
12.18 - 1800
12.06 - 1800
10.47 - 1800
10.04 - 1800
9.06 - 1800
8.33 - 1800
6.94 - 1800
5.97 - 1800
5.17 - 1800
C143 206.88 5000 2500
180.38 5000 2500
173.94 5000 2500
155.38 4500 2500
133.80 4000 2500
116.88 3600 1800
113.27 5000 2500
100.96 - 1800
98.76 5000 2500
95.23 5000 2500
85.07 4500 2500
83.49 - 1800
73.25 4000 2500
68.70 - 1800
63.99 3600 1800
56.47 - 1800
55.27 - 1800
47.95 - 1800
45.71 - 1800
40.93 - 1800
37.61 - 1800
30.92 - 1800
26.25 - 1800
22.41 - 1800

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 149

 IEC motor frame size

63 71 80 90 100 112 132 160 - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 - - - - -

NEMA adapter

N213/ N254/
N56 N143/145 N182 N184 - - - - -
[Nm] [min-1] [min-1] 215 256
C144 2162.84 13000 0.65 415265/192 6000
1885.79 13000 0.74 203665/108 6000
1669.82 13000 0.84 4488473/2688 6000
C 1624.38 13000 0.86 12995/8 6000
1455.92 13000 0.96 314479/216 6000
1400.42 13000 1.0 436931/312 6000
1398.80 13000 1.0 145475/104 6000
1254.10 13000 1.1 140459/112 6000
1221.03 13000 1.1 428582/351 6000
1099.05 13000 1.3 3376285/3072 6000
1079.94 13000 1.3 1572395/1456 6000
1051.77 13000 1.3 13673/13 6000
958.27 13000 1.5 1655885/1728 6000
905.71 13000 1.5 153065/169 6000
848.21 13000 1.7 1628561/1920 6000
825.43 13000 1.7 105655/128 6000
739.56 13000 1.9 798721/1080 6000
710.80 13000 2.0 1182775/1664 6000
701.59 13000 2.0 22451/32 6000
637.04 13000 2.2 50963/80 6000
611.72 13000 2.3 11011/18 6000
596.77 13000 2.3 993025/1664 6000
548.57 13000 2.6 114103/208 6000
526.92 13000 2.7 48477/92 6000
520.33 13000 2.7 487025/936 6000
4 stages 517.20 13000 2.7 198605/384 5600
453.75 13000 3.1 1815/4 6000
450.95 13000 3.1 97405/216 5600
n1=1400 min-1
448.20 13000 3.1 93225/208 6000
436.75 13000 3.2 754699/1728 5000
Maximum torque 421.15 13000 3.3 754699/1792 4800
13000 Nm 388.44 13000 3.6 6215/16 5600
385.96 13000 3.6 1043625/2704 6000
380.80 13000 3.7 370139/972 5000
367.20 13000 3.8 52877/144 4800
359.79 13000 3.9 8635/24 4400
334.50 13000 4.2 69575/208 5600
328.01 13000 4.3 23617/72 5000
316.30 13000 4.4 70851/224 4800
313.70 13000 4.5 8470/27 4400
294.41 13000 4.8 1469677/4992 3900
282.46 13000 5.0 264385/936 5000
272.37 13000 5.1 793155/2912 4800
270.22 13000 5.2 6215/23 4400
256.69 13000 5.5 720797/2808 3900
242.86 13000 5.8 15543/64 3500
232.69 13000 6.0 3025/13 4400
221.11 13000 6.3 45991/208 3900
211.75 13000 6.6 847/4 3500
190.97 13000 7.3 39721/208 3100
190.40 13000 7.4 514855/2704 3900
182.40 13000 7.7 33561/184 3500
166.50 13000 8.4 19481/117 3100
157.07 13000 8.9 16335/104 3500
143.42 13000 9.8 3729/26 3100
123.51 13000 11 41745/338 3100

Legend see page 113

150 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C144 2162.84 5000 3000
1885.79 5000 3000
1669.82 5000 2500
1624.38 5000 3000 C
1455.92 5000 2500
1400.42 5000 2500
1398.80 5000 3000
1254.10 5000 2500
1221.03 5000 2500
1099.05 5000 2500
1079.94 5000 2500
1051.77 5000 2500
958.27 5000 2500
905.71 5000 2500
848.21 5000 2500
825.43 5000 2500
739.56 5000 2500
710.80 5000 2500
701.59 5000 2500
637.04 5000 2500
611.72 5000 2500
596.77 5000 2500
548.57 5000 2500
526.92 5000 2500
520.33 5000 2500
517.20 5000 2500
453.75 5000 2500
450.95 5000 2500
448.20 5000 2500
436.75 5000 2500
421.15 5000 2500
388.44 5000 2500
385.96 5000 2500
380.80 5000 2500
367.20 5000 2500
359.79 4500 2500
334.50 5000 2500
328.01 5000 2500
316.30 5000 2500
313.70 4500 2500
294.41 4000 2500
282.46 5000 2500
272.37 5000 2500
270.22 4500 2500
256.69 4000 2500
242.86 3600 2500
232.69 4500 2500
221.11 4000 2500
211.75 3600 2500
190.97 - 2500
190.40 4000 2500
182.40 3600 2500
166.50 - 2500
157.07 3600 2500
143.42 - 2500
123.51 - 2500

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 151

 IEC motor frame size

63 71 80 90 100 112 132 160 180 200 225 250 280

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 I225 I250 I280

NEMA adapter

N213/ N254/ N284/ N324/

N56 N143/145 N182 N184 N364 - -
[Nm] [min-1] [min-1] 215 256 286 326
C162 33.00 13926 42 33/1 3900
25.15 18000 56 327/13 3100
21.12 18000 66 528/25 2700
C 17.70 7468 79 407/23 3900
2 stages 17.38 18000 81 504/29 2300
14.79 18000 95 207/14 2100
13.49 10003 104 4033/299 3100
n1=1400 min-1
12.77 18000 110 396/31 1900
11.33 11261 124 6512/575 2700
Maximum torque 11.12 18000 126 189/17 1800
18000 Nm 9.32 11197 150 6216/667 2300
7.93 11261 177 111/14 2100
6.85 11261 204 4884/713 1900
5.96 11261 235 2331/391 1800
C163 234.67 18000 6.0 704/3 5000
202.12 18000 6.9 106920/529 4400
174.82 18000 8.0 52272/299 3900
154.21 18000 9.1 81576/529 3500 x
132.44 18000 11 39600/299 3100 x
130.53 18000 11 15272/117 5000
112.42 18000 12 33615/299 4400
3 stages 110.19 18000 13 12672/115 2700 x
97.24 18000 14 16434/169 3900
91.43 18000 15 60984/667 2300 x
n1=1400 min-1
85.78 18000 16 25647/299 3500 x
76.25 18000 18 12276/161 2100 x
Maximum torque 73.67 18000 19 12450/169 3100 x
18000 Nm 65.54 18000 21 46728/713 1900 x
61.29 18000 23 3984/65 2700 x
56.72 18000 25 22176/391 1800 x
50.86 18000 28 19173/377 2300 x
42.41 18000 33 7719/182 2100 x
36.45 18000 38 14691/403 1900 x
31.55 17437 44 6972/221 1800 x

x I280 only. Direct mounting of the motor not possible

Legend see page 113

152 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C162 33.00 - 2500
25.15 - 1800
21.12 - 1800
17.70 - 2500 C
17.38 - 1800
14.79 - 1800
13.49 - 1800
12.77 - 1800
11.33 - 1800
11.12 - 1800
9.32 - 1800
7.93 - 1800
6.85 - 1800
5.96 - 1800
C163 234.67 - 2500
202.12 - 2500
174.82 - 2500
154.21 - 1800
132.44 - 1800
130.53 - 2500
112.42 - 2500
110.19 - 1800
97.24 - 2500
91.43 - 1800
85.78 - 1800
76.25 - 1800
73.67 - 1800
65.54 - 1800
61.29 - 1800
56.72 - 1800
50.86 - 1800
42.41 - 1800
36.45 - 1800
31.55 - 1800

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 153

 IEC motor frame size

63 71 80 90 100 112 132 160 180 200 - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 - - -

NEMA adapter

N213/ N254/ N284/ N324/

N56 N143/145 N182 N184 - - -
[Nm] [min-1] [min-1] 215 256 286 326
C164 2093.95 18000 0.67 81664/39 6000
1803.51 18000 0.78 12402720/6877 6000
1657.33 18000 0.84 4972/3 6000
C 1559.96 18000 0.90 6063552/3887 6000
1447.11 18000 0.97 13024/9 6000
1427.45 18000 0.98 1510245/1058 6000
1278.93 18000 1.1 19184/15 6000
1246.39 18000 1.1 659340/529 6000
1234.69 18000 1.1 369171/299 6000
1101.54 18000 1.3 582714/529 6000
1081.51 18000 1.3 74624/69 6000
1078.07 18000 1.3 322344/299 6000
952.78 18000 1.5 1424412/1495 6000
931.50 18000 1.5 11333520/12167 6000
929.64 18000 1.5 36256/39 6000
811.56 18000 1.7 7304/9 5600
805.70 18000 1.7 5540832/6877 6000
800.70 18000 1.7 5506380/6877 6000
698.99 18000 2.0 369765/529 5600
695.31 18000 2.0 56320/81 5000
4 stages
692.57 18000 2.0 2692008/3887 6000
670.48 18000 2.1 14080/21 4800
n1=1400 min-1 604.60 18000 2.3 180774/299 5600
598.87 18000 2.3 316800/529 5000
591.77 18000 2.4 40832/69 4400
Maximum torque
577.48 18000 2.4 2138400/3703 4800
18000 Nm
517.99 18000 2.7 154880/299 5000
509.69 18000 2.7 6201360/12167 4400
499.49 18000 2.8 1045440/2093 4800
496.41 18000 2.8 19360/39 3900
440.86 18000 3.2 3031776/6877 4400
427.56 18000 3.3 2940300/6877 3900
418.32 18000 3.3 28864/69 3500
369.82 18000 3.8 1437480/3887 3900
360.30 18000 3.9 4383720/12167 3500
342.97 18000 4.1 13376/39 3100
311.64 18000 4.5 2143152/6877 3500
295.40 18000 4.7 2031480/6877 3100
272.21 18000 5.1 20416/75 2700
255.51 18000 5.5 993168/3887 3100
234.46 18000 6.0 620136/2645 2700
202.79 18000 6.9 1515888/7475 2700
202.30 18000 6.9 17600/87 2300
174.24 18000 8.0 2673000/15341 2300
150.71 18000 9.3 1306800/8671 2300

Legend see page 113

154 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C164 2093.95 5000 2500
1803.51 5000 2500
1657.33 5000 2500
1559.96 5000 2500 C
1447.11 5000 2500
1427.45 5000 2500
1278.93 5000 2500
1246.39 5000 2500
1234.69 5000 2500
1101.54 5000 2500
1081.51 5000 2500
1078.07 5000 2500
952.78 5000 2500
931.50 5000 2500
929.64 5000 2500
811.56 5000 2500
805.70 5000 2500
800.70 5000 2500
698.99 5000 2500
695.31 5000 2500
692.57 5000 2500
670.48 5000 2500
604.60 5000 2500
598.87 5000 2500
591.77 4800 2500
577.48 5000 2500
517.99 5000 2500
509.69 4800 2500
499.49 5000 2500
496.41 4200 2500
440.86 4800 2500
427.56 4200 2500
418.32 3800 2500
369.82 4200 2500
360.30 3800 2500
342.97 - 2500
311.64 3800 2500
295.40 - 2500
272.21 - 2500
255.51 - 2500
234.46 - 2500
202.79 - 2500
202.30 - 2500
174.24 - 2500
150.71 - 2500

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 155

 IEC motor frame size

63 71 80 90 100 112 132 - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 - - - - - -

NEMA adapter

N213/
N56 N143/145 N182 N184 - - - - - -
[Nm] [min-1] [min-1] 215
C165 22405.25 18000 0.06 4369024/195 6000
18322.05 18000 0.08 714560/39 6000
15484.09 18000 0.09 696784/45 6000
C 14467.28 18000 0.10 564224/39 6000
12662.22 18000 0.11 113960/9 6000
11217.58 18000 0.12 1020800/91 6000
9998.22 18000 0.14 89984/9 6000
9181.16 18000 0.15 1551616/169 6000
7752.38 18000 0.18 162800/21 6000
7067.08 18000 0.20 91872/13 6000
5 stages 6345.03 18000 0.22 247456/39 6000
5339.57 18000 0.26 347072/65 6000
4884.00 18000 0.29 4884/1 6000
n1=1400 min-1
4369.98 18000 0.32 1306624/299 6000
3690.13 18000 0.38 55352/15 6000
Maximum torque 3543.61 18000 0.40 1796608/507 6000
18000 Nm 3020.06 18000 0.46 208384/69 6000
2966.43 18000 0.47 347072/117 5600
2448.96 18000 0.57 286528/117 6000
2404.16 18000 0.58 2531584/1053 5000
2318.30 18000 0.60 632896/273 4800
2050.07 18000 0.68 55352/27 5600
1820.82 18000 0.77 1633280/897 4400
1661.50 18000 0.84 403744/243 5000
1602.16 18000 0.87 100936/63 4800
1258.36 18000 1.1 260480/207 4400

Legend see page 113

156 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
C165 22405.25 5000 3000
18322.05 5000 3000
15484.09 5000 3000
14467.28 5000 3000 C
12662.22 5000 3000
11217.58 5000 3000
9998.22 5000 3000
9181.16 5000 3000
7752.38 5000 3000
7067.08 5000 3000
6345.03 5000 3000
5339.57 5000 3000
4884.00 5000 3000
4369.98 5000 3000
3690.13 5000 3000
3543.61 5000 3000
3020.06 5000 3000
2966.43 5000 3000
2448.96 5000 3000
2404.16 5000 3000
2318.30 5000 3000
2050.07 5000 3000
1820.82 4200 3000
1661.50 5000 3000
1602.16 5000 3000
1258.36 4200 3000

Legend see page 113

www.weg.net WG20 Gear Units and Geared Motors 157

C

Legend see page 113

158 WG20 Gear Units and Geared Motors www.weg.net

Dimension sheets Geared Motors
C

C
www.weg.net WG20 Gear Units and Geared Motors 159
 CG00 - Foot mounted

kB
k
118,5 LB1
1,5 LB AD

51
Ø AC
C

65 -0,5
1,2

11
29 32 22 Ø 6,6
7,5

8 95 85
108,5 108

40
4 32 6
Ø 20 k6

22,5

DIN332 M6

CW00 - Foot mounted with B14 flange execution + CC00 - B14 flange execution +
centring and threaded hole centring and threaded hole

80 80
°
°

69
90

69
90

Ø Ø
Ø 56 j6

Ø 56 j6

2 M6 x 12 2 M6 x 12
10 10

Motor fr.
63 71 80 L80
Dimension
AC 126 141 159 159
AD 128 136 145 145
k 323 357 365 389
kB 367 406 423 447
LB 204 238 246 270
LB1 248 287 304 328

Motor dimension sheets see page 590

Description of motor lengths LB and LB1 see page 594

160 WG20 Gear Units and Geared Motors www.weg.net

 CF00 - Flange execution

kB
k
118,5 LB1
LB AD

Ø AC
C
1,2

63,5
108

Flange Ø 120 Flange Ø 140 Flange Ø 160

40 10
40 9
40 8 3,5 Ø9
3 Ø9
15
3 Ø 6,5
00

Ø1

0
13
Ø1

Ø 110 j6
Ø 95 j6
Ø 80 j6
Ø 120

Ø 160
Ø 140

45°
4 x 90°

CA00 - Foot mounted and B5 flange execution

mountable flange sizes on the housing: Ø 120

kB
k
118,5 LB1
LB AD
Ø AC

65 -0,5
1,2

29 32 22 Ø 6,6
8 95 85
108,5 108

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 161

 CG01 - Foot mounted

kB
k
131 LB1
1 LB AD

57
Ø AC
C

75 -0,5
7,3

12,5
28 42 29 Ø9
9

18 110 110
133 140

40
4 32 6
Ø 20 k6

22,5

DIN 332 M6

CW01 - Foot mounted with B14 flange execution + CC01 - B14 flange execution +
centring and threaded hole centring and threaded hole

90 90
°

69
°

69
90
90

Ø Ø
Ø 56 j6

Ø 56 j6

2 M6 x 12 2 M6 x 12
10 10

Motor fr.
63 71 80 L80 90S/L
Dimension
AC 126 141 159 159 178
AD 128 136 145 145 155
k 335 369 377 401 419
kB 379 418 435 459 492
LB 204 238 246 270 288
LB1 248 287 304 328 361

Motor dimension sheets see page 590

Description of motor lengths LB and LB1 see page 594

162 WG20 Gear Units and Geared Motors www.weg.net

CF01 - Flange execution

kB
k
131 LB1
LB AD

Ø AC
C
7,3

74
140

Flange Ø 120 Flange Ø 140 Flange Ø 160

40 10
40 8 40 9
3,5 Ø9
3 Ø9
15
3 Ø 6,5
0

Ø1
10

0
13
Ø

Ø 110 j6
Ø 95 j6
Ø 80 j6

Ø 160
Ø 140
Ø 120

45°
4 x 90°

CA01 - Foot mounted and B5 flange execution

mountable flange sizes on the housing: Ø 120 and Ø 140

kB
k
131 LB1
LB AD
Ø AC

75 -0,5
7,3

28 42 29 Ø9
18 110 110
133 140

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 163

 CG03 - Foot mounted

kB
k
158,5 LB1
2,5 LB AD

61
Ø AC
C

90 -0,5
13,1

19
40 46 44 Ø9
11

25 130 110
160 161

50
5 40 8
Ø 25 k6

28

DIN332 M10

CW03 - Foot mounted with B14 flange execution + CC03 - B14 flange execution +
centring and threaded hole centring and threaded hole

104 104

90
°
°

90
90
90

Ø Ø
Ø 75 j6
Ø 75 j6

3 M6 x 12 3 M6 x 12
10 10

Motor fr.
63 71 80 L80 90S/L 100L L100L
Dimension
AC 126 141 159 159 178 199 199
AD 128 136 145 145 155 165 165
k 363 397 405 429 447 497 535
kB 407 446 463 487 520 581 619
LB 204 238 246 270 288 338 376
LB1 248 287 304 328 361 422 460

Motor dimension sheets see page 590

Description of motor lengths LB and LB1 see page 594

164 WG20 Gear Units and Geared Motors www.weg.net

 CF03 - Flange execution

kB Flange Ø 120
k
158,5 LB1
8 LB AD
Ø 6,5
3
0
10
Ø
Ø 80 j6
Ø 120

Ø AC
C
13,1

89
161

Flange Ø 140 Flange Ø 160 Flange Ø 200

50 12
50 10 3,5 Ø 11
50 9
3,5 Ø9
0

3 Ø9
13

5
16
Ø

5 Ø
11
Ø
Ø 110 j6

Ø 130 j6
Ø 95 j6

Ø 200
Ø 140

Ø 160

45°
4 x 90°

CA03 - Foot mounted and B5 flange execution

mountable flange sizes on the housing: Ø 120, Ø 140 and Ø 160

kB
k
158,5 LB1
LB AD
Ø AC

90 -0,5
13,1

40 46 44 Ø9
25 130 110
160 161

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 165

 CG05 - Foot mounted

kB
k
194 LB1
5 LB AD

71
Ø AC
C

115 -0,5
16,1

23
56 54 50 Ø 14
14

30 165 135
200 190

60 70
5 50 8 7 56 10
Ø 30 k6

Ø 35 k6
33

38
DIN332 M10 DIN332 M12

CW05 - Foot mounted with B14 flange execution + CC05 - B14 flange execution +
centring and threaded hole centring and threaded hole

127 127

2
2

11
11

°
°

Ø
90
Ø
90
Ø 93 j6

Ø 93 j6

6 M10 x 20 6 M10 x 20
10 10

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M
Dimension
AC 126 141 159 159 178 199 199 221 261 261
AD 128 136 145 145 155 165 165 185 205 205
k 398 432 440 464 482 532 570 542 607 645
kB 442 481 498 522 555 616 654 629 725 763
LB 204 238 246 270 288 338 376 348 413 451
LB1 248 287 304 328 361 422 460 435 531 569

Motor dimension sheets see page 590

Description of motor lengths LB and LB1 see page 594

166 WG20 Gear Units and Geared Motors www.weg.net

CF05 - Flange execution

kB
k
194 LB1
LB AD

Ø AC
C
16,1

114
190

Flange Ø 160 Flange Ø 200 Flange Ø 250

60 15
60 12
60 10 4 Ø 13,5
3,5 Ø 11
65

3,5 Ø9
Ø1
0

5
21
13

Ø
Ø

Ø 180 j6
Ø 110 j6

Ø 130 j6
Ø 200

Ø 250
Ø 160

45°
4 x 90°

CA05 - Foot mounted and B5 flange execution

mountable flange sizes on the housing: Ø 160 and Ø 200

kB
k
194 LB1
LB AD
Ø AC

115 -0,5
16,1

56 54 50 Ø 14
30 165 135
200 190

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 167

 CG06 - Foot mounted

kB
k
209 LB1
5 LB AD

82
Ø AC
C

130 -0,5
24,8

29
65,5 69,5 63 Ø 14
15

30 195 150
241 215

70
7 56 10
Ø 35 k6

38

DIN332 M12

CW06 - Foot mounted with B14 flange execution + CC06 - B14 flange execution +
centring and threaded hole centring and threaded hole

146 146

0
0

13
13

Ø
Ø

°
°

90
90

Ø 105 j6
Ø 105 j6

5,5 M10 x 20 5,5 M10 x 20

12 12

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M
Dimension
AC 126 141 159 159 178 199 199 221 261 261
AD 128 136 145 145 155 165 165 185 205 205
k 413 447 455 479 497 547 585 557 622 660
kB 457 496 513 537 570 631 669 644 740 778
LB 204 238 246 270 288 338 376 348 413 451
LB1 248 287 304 328 361 422 460 435 531 569

Motor dimension sheets see page 590

Description of motor lengths LB and LB1 see page 594

168 WG20 Gear Units and Geared Motors www.weg.net

CF06 - Flange execution

kB
k
209 LB1
LB AD

Ø AC
C

128,5
24,8

215

Flange Ø 200 Flange Ø 250

70 15
70 12 4 Ø 13,5
3,5 Ø 11
5
65 21
Ø
Ø1
Ø 130 j6

Ø 180 j6
Ø 200

Ø 250

45°
4 x 90°

CA06 - Foot mounted and B5 flange execution

mountable flange sizes on the housing: Ø 200

kB
k
209 LB1
LB AD
Ø AC

130 -0,5

65,5 69,5 63 Ø 14
30 195 150
241 215

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 169

 CG07 - Foot mounted

kB
k
219,5 LB1
3 LB AD

98,5
Ø AC
C

140 -0,5
15,5

31
63 80 67 Ø 17,5
35 205 170
245 251

80
5 70 12
Ø 40 k6

43

DIN332 M16

CW07 - Foot mounted with B14 flange execution + CC07 - B14 flange execution +
centring and threaded hole centring and threaded hole

162 162

6
6

13
13

°
°

90
90

Ø
Ø
Ø 112 j6

Ø 112 j6

6 M12 x 18 6 M12 x 18
18,5 18,5

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L
Dimension
AC 126 141 159 159 178 199 199 221 261 261 329 329
AD 128 136 145 145 155 165 165 185 205 205 266 266
k 424 458 466 490 508 558 596 568 633 671 765 809
kB 468 507 524 548 581 642 680 655 751 789 889 933
LB 204 238 246 270 288 338 376 348 413 451 545 589
LB1 248 287 304 328 361 422 460 435 531 569 669 713

Motor dimension sheets see page 590; Gear unit size C07 corresponds to motor flange FR-200.
Description of motor lengths LB and LB1 see page 594

170 WG20 Gear Units and Geared Motors www.weg.net

CF07 - Flange execution

kB
k
219,5 LB1
LB AD

Ø AC
C
15,5

141
251

Flange Ø 250 Flange Ø 300

80 16
80 15
4 Ø 13,5
4 Ø 13,5
5 5
21 26
Ø Ø
Ø 230 j6
Ø 180 j6
Ø 250

Ø 300

45°
4 x 90°

CA07 - Foot mounted and B5 flange execution

mountable flange sizes on the housing: Ø 250

kB
k
219,5 LB1
LB AD
Ø AC

140 -0,5
15,5

63 80 67 Ø 17,5
35 205 170
245 251

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 171

 CG08 - Foot mounted

kB
k
261,5 LB1
5 LB AD

126
Ø AC
C

180 -0,5
12,3

46
81 99 81 Ø 17,5
40 260 215
310 308

100
10 80 14
Ø 50 k6

53,5

DIN332 M16

CW08 - Foot mounted with B14 flange execution + CC08 - B14 flange execution +
centring and threaded hole centring and threaded hole

189 189

0 0
16 16
°
°

Ø Ø
90
90
Ø 136 j6

Ø 136 j6

8 M16 x 24 8 M16 x 24
22 22

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L 180M 180L
Dimension
AC 126 141 159 159 178 199 199 221 261 261 329 329 347 347
AD 128 136 145 145 155 165 165 185 205 205 266 266 281 281
k 466 500 508 532 550 600 638 610 675 713 802 846 870 908
kB 510 549 566 590 623 684 722 697 793 831 926 970 988 1026
LB 204 238 246 270 288 338 376 348 413 451 540 584 608 646
LB1 248 287 304 328 361 422 460 435 531 569 664 708 726 764

Motor dimension sheets see page 590; Gear unit size C08 corresponds to motor flange FR-250.
Description of motor lengths LB and LB1 see page 594

172 WG20 Gear Units and Geared Motors www.weg.net

CF08 - Flange execution

kB
k
261,5 LB1
LB AD

Ø AC
C
12,3

181
308

Flange Ø 300 Flange Ø 350

100 18
100 16
5 Ø 17,5
4 Ø 13,5
0
5 30
26 Ø
Ø
Ø 230 j6

Ø 250 j6
Ø 300

Ø 350

45°
4 x 90°

CA08 - Foot mounted and B5 flange execution

mountable flange sizes on the housing: Ø 300

kB
k
261,5 LB1
LB AD
Ø AC

180 -0,5
12,3

81 99 81 Ø 17,5
40 260 215
310 308

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 173

 CG092 / CG093 - Foot mounted

kB
k
318,5 LB1
4 LB AD

152
Ø AC
C

225 -0,5
14,3

56
95 105 103 Ø 22
40 310 250
365 366

120
5 110 18
Ø 60 m6

64

DIN332 M20

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L 180M 180L 200L
Dimension
AC 126 141 159 159 178 199 199 221 261 261 329 329 347 347 386
AD 128 136 145 145 155 165 165 185 205 205 266 266 281 281 317
k 523 557 565 589 607 657 695 667 732 770 854 898 922 960 1052
kB 567 606 623 647 680 741 779 754 850 888 978 1022 1040 1078 1178
LB 204 238 246 270 288 338 376 348 413 451 535 579 603 641 733
LB1 248 287 304 328 361 422 460 435 531 569 659 703 721 759 859

Motor dimension sheets see page 590; Gear unit size C092/C093 corresponds to motor flange FR-300.
Description of motor lengths LB and LB1 see page 594

174 WG20 Gear Units and Geared Motors www.weg.net

CF092 / CF093 - Flange execution

kB
k
318,5 LB1
LB AD

Ø AC
14,3

226
366

Flange Ø 350 Flange Ø 450

120 22
120 20 5 Ø 18
5 Ø 18
0
0 40
30 Ø
Ø
Ø 350 h6
Ø 250 j6

Ø 450
Ø 350

22,5°
45°

°
45
4 x 90°

x
8

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 175

 CG094 - Foot mounted

kB
k
404 LB1
4 LB AD

152
Ø AC
C
35,7

225 -0,5
56
95 105 103 Ø 22
40 310 250
365 366

120
5 110 18
Ø 60 m6

64

DIN332 M20

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M
Dimension
AC 126 141 159 159 178 199 199 221 261 261
AD 128 136 145 145 155 165 165 185 205 205
k 608 642 650 674 692 742 780 752 817 855
kB 652 691 708 732 765 826 864 839 935 973
LB 204 238 246 270 288 338 376 348 413 451
LB1 248 287 304 328 361 422 460 435 531 569

Motor dimension sheets see page 590

Description of motor lengths LB and LB1 see page 594

176 WG20 Gear Units and Geared Motors www.weg.net

CF094 - Flange execution

kB
k
404 LB1
LB AD

Ø AC
C
35,7

226
366

Flange Ø 350 Flange Ø 450

120 22
120 20 5 Ø 18
5 Ø 18
0
0 40
30 Ø
Ø
Ø 350 h6
Ø 250 j6

Ø 450
Ø 350

22,5°
45°

°
45
4 x 90°

x
8

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 177

 CG102 / CG103 - Foot mounted

kB
k
354,8 LB1
5 LB AD

159
Ø AC
C

250 -0,5
22,7

66
112 148 119 Ø 26
45 370 290
440 426

140
8 125 20
Ø 70 m6

75

DIN332 M20

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L 180M 180L 200L
Dimension
AC 126 141 159 159 178 199 199 221 261 261 329 329 347 347 386
AD 128 136 145 145 155 165 165 185 205 205 266 266 281 281 317
k 559 593 601 625 643 693 731 703 768 806 890 934 958 996 1088
kB 603 642 659 683 716 777 815 790 886 924 1014 1058 1076 1114 1214
LB 204 238 246 270 288 338 376 348 413 451 535 579 603 641 733
LB1 248 287 304 328 361 422 460 435 531 569 659 703 721 759 859

Motor dimension sheets see page 590; Gear unit size C102/C103 corresponds to motor flange FR-300.
Description of motor lengths LB and LB1 see page 594

178 WG20 Gear Units and Geared Motors www.weg.net

CF102 / CF103 - Flange execution

kB
k
354,8 LB1
LB AD

Ø AC
C
22,7

251
426

Flange Ø 350 Flange Ø 450

140 22
140 20 5 Ø 18
5 Ø 18
0
30
0 40
Ø Ø
Ø 350 h6
Ø 250 j6

Ø 450
Ø 350

22,5°
45°

°
45
4 x 90°

x
8

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 179

 CG104 - Foot mounted

kB
k
440 LB1
5 LB AD

159
Ø AC
C
27,3

250 -0,5
66
112 148 119 Ø 26
45 370 290
440 426

140
8 125 20
Ø 70 m6

75

DIN332 M20

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M
Dimension
AC 126 141 159 159 178 199 199 221 261 261
AD 128 136 145 145 155 165 165 185 205 205
k 644 678 686 710 728 778 816 788 853 891
kB 688 727 744 768 801 862 900 875 971 1009
LB 204 238 246 270 288 338 376 348 413 451
LB1 248 287 304 328 361 422 460 435 531 569

Motor dimension sheets see page 590

Description of motor lengths LB and LB1 see page 594

180 WG20 Gear Units and Geared Motors www.weg.net

CF104 - Flange execution

kB
k
440 LB1
LB AD

Ø AC
C
22,7

251
426

Flange Ø 350 Flange Ø 450

140 22
140 20 5 Ø 18
5 Ø 18
0
30
0 40
Ø Ø
Ø 350 h6
Ø 250 j6

Ø 450
Ø 350

22,5°
45°

°
45
4 x 90°

x
8

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 181

 CG132 / CG133 - Foot mounted

kB
k
420 LB1
5 LB AD

186
C

Ø AC
33

315 -1
66
122 136 114 Ø 33
50 410 340
490 468

170
5 160 25
Ø 90 m6

95

DIN332 M24

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L 180M 180L 200L 225S/M 280S/M
Dimension
AC - - - - - - - 221 261 261 329 329 347 347 386 453 599
AD - - - - - - - 185 205 205 266 266 281 281 317 385 472
k - - - - - - - 768 833 871 942 986 1010 1048 1140 1248 1409
kB - - - - - - - 855 951 989 1066 1110 1128 1166 1266 1366 1502
LB - - - - - - - 348 413 451 522 566 590 628 720 828 989
LB1 - - - - - - - 435 531 569 646 690 708 746 846 946 1082

Motor dimension sheets see page 590; Gear unit size C132/C133 corresponds to motor flange FR-400.
Description of motor lengths LB and LB1 see page 594

182 WG20 Gear Units and Geared Motors www.weg.net

CF132 / CF133 - Flange execution

kB
k
420 LB1
LB AD

Ø AC
33

315
468

Flange Ø 450 Flange Ø 550

170 25
170 22
5 Ø 18
5 Ø 18

0
50
0
40

Ø
Ø

Ø 450 h6
Ø 350 h6
Ø 450

Ø 550
22,5°

22,5°
°
45

°
45
x
8

x
8

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 183

 CG134 - Foot mounted

kB
k
497 LB1
5 LB AD

186
Ø AC
C
39,4

315 -1
66
122 136 114 Ø 33
50 410 340
490 468

170
5 160 25
Ø 90 m6

95

DIN332 M24

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L
Dimension
AC 126 141 159 159 178 199 199 221 261 261 329 329
AD 128 136 145 145 155 165 165 185 205 205 266 266
k 701 735 743 767 785 835 873 845 910 948 1042 1086
kB 745 784 801 825 858 919 957 932 1028 1066 1166 1210
LB 204 238 246 270 288 338 376 348 413 451 545 589
LB1 248 287 304 328 361 422 460 435 531 569 669 713

Motor dimension sheets see page 590; Gear unit size C134 corresponds to motor flange FR-200.
Description of motor lengths LB and LB1 see page 594

184 WG20 Gear Units and Geared Motors www.weg.net

CF134 - Flange execution

kB
k
497 LB1
LB AD

Ø AC
C
39,4

315
468

Flange Ø 450 Flange Ø 550

170 25
170 22
5 Ø 18
5 Ø 18

0
50
0
40

Ø
Ø

Ø 450 h6
Ø 350 h6
Ø 450

Ø 550
22,5°

22,5°
°
45

°
45
x
8

x
8

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 185

 CG142 / CG143 - Foot mounted

kB
k
486 LB1
5 LB AD

211
C

Ø AC
35,5

355 -1
82
156 176 156 Ø 39
50 500 380
590 551

210
15 180 28
Ø 110 m6

116

DIN332 DR M24

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L 180M 180L 200L 225S/M 280S/M
Dimension
AC - - - - - - - 221 261 261 329 329 347 347 386 453 599
AD - - - - - - - 185 205 205 266 266 281 281 317 385 472
k - - - - - - - 834 899 937 1008 1052 1076 1114 1206 1314 1475
kB - - - - - - - 921 1017 1055 1132 1176 1194 1232 1332 1432 1568
LB - - - - - - - 348 413 451 522 566 590 628 720 828 989
LB1 - - - - - - - 435 531 569 646 690 708 746 846 946 1082

Motor dimension sheets see page 590; Gear unit size C142/143 corresponds to motor flange FR-400.
Description of motor lengths LB and LB1 see page 594

186 WG20 Gear Units and Geared Motors www.weg.net

CF142 / CG143 - Flange execution

kB
k
486 LB1
LB AD

Ø AC
35,5

355
551

Flange Ø 450 Flange Ø 550

210 25
210 22
5 Ø 18
5 Ø 18

0
50
0
40

Ø
Ø

Ø 450 h6
Ø 350 h6
Ø 450

Ø 550
2,5°

22,5°
° 2
45

°
45
x
8

x
8

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 187

 CG144 - Foot mounted

kB
k
563 LB1
5 LB AD

211
Ø AC
C
15,5

355 -1
82
156 176 156 Ø 39
50 500 380
590 551

210
15 180 28
Ø 110 m6

116

DIN332 DR M24

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L
Dimension
AC 126 141 159 159 178 199 199 221 261 261 329 329
AD 128 136 145 145 155 165 165 185 205 205 266 266
k 767 801 809 833 851 901 939 911 976 1014 1108 1152
kB 811 850 867 891 924 985 1023 998 1094 1132 1232 1276
LB 204 238 246 270 288 338 376 348 413 451 545 589
LB1 248 287 304 328 361 422 460 435 531 569 669 713

Motor dimension sheets see page 590; Gear unit size C144 corresponds to motor flange FR-200.
Description of motor lengths LB and LB1 see page 594

188 WG20 Gear Units and Geared Motors www.weg.net

CF144 - Flange execution

kB
k
563 LB1
LB AD

Ø AC
35,5
C

355
551

Flange Ø 450 Flange Ø 550

210 25
210 22
5 Ø 18
5 Ø 18

0
50
0
40

Ø
Ø

Ø 450 h6
Ø 350 h6
Ø 450

Ø 550
2,5°

22,5°
° 2
45

°
45
x
8

x
8

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 189

 CG162 / CG163 - Foot mounted

kB
k
581 LB1
5 LB AD

251
C

Ø AC
67

425 -1
102
195 180 159 Ø 39
60 580 500
670 666

210
5 200 32
Ø 120 m6

127

DIN332 DR M24

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L 180M 180L 200L 225S/M 280S/M
Dimension
AC - - - - - - - - - - 329 329 347 347 386 453 599
AD - - - - - - - - - - 266 266 281 281 317 385 472
k - - - - - - - - - - 1087 1131 1155 1193 1285 1393 1554
kB - - - - - - - - - - 1211 1255 1273 1311 1411 1511 1647
LB - - - - - - - - - - 506 550 574 612 704 812 973
LB1 - - - - - - - - - - 630 674 692 730 830 930 1066

Motor dimension sheets see page 590; Gear unit size C162/C163 corresponds to motor flange FR-550.
Description of motor lengths LB and LB1 see page 594

190 WG20 Gear Units and Geared Motors www.weg.net

CF162 / CF163 - Flange execution

kB
k
581 LB1
LB AD

Ø AC
67

425
666

Flange Ø 550 Flange Ø 660

210 28 Ø 22
210 25
6
5 Ø 18

0
60
Ø
00
Ø5
Ø 450 h6

Ø 550 h6
Ø 660
Ø 550

22.5°

22,5°
°
45

°
45
x
8

x
8

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 191

 CG164 - Foot mounted

kB
k
668 LB1
5 LB AD

251
Ø AC
C
2

425 -1
102
195 180 159 Ø 39
60 580 500
670 666

210
5 200 32
Ø 120 m6

127

DIN332 DR M24

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L 180M 180L 200L
Dimension
AC 126 141 159 159 178 199 199 221 261 261 329 329 347 347 386
AD 128 136 145 145 155 165 165 185 205 205 266 266 281 281 317
k 204 238 246 270 288 338 376 348 413 451 535 579 603 641 733
kB 916 955 972 996 1029 1090 1128 1103 1199 1237 1327 1371 1389 1427 1527
LB 204 238 246 270 288 338 376 348 413 451 535 579 603 641 733
LB1 248 287 304 328 361 422 460 435 531 569 659 703 721 759 859

Motor dimension sheets see page 590; Gear unit size C164 corresponds to motor flange FR-300.
Description of motor lengths LB and LB1 see page 594

192 WG20 Gear Units and Geared Motors www.weg.net

CF164 - Flange execution

kB
k
668 LB1
LB AD

Ø AC
C
2

425
666

Flange Ø 550 Flange Ø 660

210 28 Ø 22
210 25
6
5 Ø 18

0
60
Ø
00
Ø5
Ø 450 h6

Ø 550 h6
Ø 660
Ø 550

22.5°

22,5°
°
45

°
45
x
8

x
8

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 193

 CG165 - Foot mounted

kB
k
751 LB1
5 LB AD

251
Ø AC
C
48

425 -1
102
195 180 159 Ø 39
60 580 500
670 666

210
5 200 32
Ø 120 m6

127

DIN332 DR M24

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M
Dimension
AC 126 141 159 159 178 199 199 221 261 261
AD 128 136 145 145 155 165 165 185 205 205
k 955 989 997 1021 1039 1089 1127 1099 1164 1202
kB 999 1038 1055 1079 1112 1173 1211 1186 1282 1320
LB 204 238 246 270 288 338 376 348 413 451
LB1 248 287 304 328 361 422 460 435 531 569

Motor dimension sheets see page 590

Description of motor lengths LB and LB1 see page 594

194 WG20 Gear Units and Geared Motors www.weg.net

CF165 - Flange execution

kB
k
751 LB1
LB AD

Ø AC
C
48

425
666

Flange Ø 550 Flange Ø 660

210 28 Ø 22
210 25
6
5 Ø 18

0
60
Ø
00
Ø5
Ø 450 h6

Ø 550 h6
Ø 660
Ø 550

22.5°

22,5°
°
45

°
45
x
8

x
8

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 195

C

196 WG20 Gear Units and Geared Motors www.weg.net

Dimension sheets Input types
C

C
www.weg.net WG20 Gear Units and Geared Motors 197
 IEC Adapter I63 to I280

l
la

m f

Ød
Ø n H7
Øp

ga
C
Ød

t α1 s
E
α

Type I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 I225 I250 I280

p 154 154 200 200 250 250 300 350 350 400 450 550 550
n 95 110 130 130 180 180 230 250 250 300 350 450 450
la 22.5 10 13 13 15 20 15 35 35 20 20 20 20
m 115 130 165 165 215 215 265 300 300 350 400 500 500
t 4.5 4.5 4.5 4.5 5 5 5 5 5 5.5 5 5 5
s M8x16 M8x10 11 11 13.5 13.5 13.5 17.5 17.5 17.5 17.5 17.5 17.5
α 90 90 90 90 90 90 90 90 90 90 45 45 45
α1 35 45 45 45 45 45 45 45 45 45 45 45 45
d 11 14 19 24 28 28 38 42 48 55 60 65 75
f 4 5 6 8 8 8 10 12 14 16 18 18 20
ga 12.8 16.3 21.8 27.3 31.3 31.3 41.3 45.3 51.8 59.3 64.4 69.4 79.9
E 1) 25 32 43 47.5 63 100 85.5 111.5 111.5 114.5 140 146 146
1) Maximum motor shaft length for motors with key

I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 I225 I250 I280
Gear unit
size
l
C00 150.5 150.5 178.5 178.5 209.5 - - - - - - - -
C01 163 163 191 191 222 - - - - - - - -
C03 190.5 190.5 218.5 218.5 249.5 - - - - - - - -
C05 226 226 254 254 285 338 349 - - - - - -
C06 241 241 269 269 300 353 364 - - - - - -
C07 252.5 252.5 280.5 280.5 311.5 364.5 375.5 461.5 461.5 - - - -
C08 293.5 293.5 321.5 321.5 352.5 405.5 416.5 498.5 498.5 - - - -
C092/93 343 343 371 371 402 455 466 550.5 550.5 579 609 - -
C094 425 425 453 453 484 538 549 - - - - - -
C102/103 379 379 407 407 438 491 502 586.5 586.5 615 645 - -
C104 462 462 490 490 521 574 585 - - - - - -
C132/133 - - - - - 545.5 556.5 638.5 638.5 667 697 791 791
C134 529.5 529.5 557.5 557.5 588.5 641.5 652.5 738.5 738.5 - - - -
C142/143 - - - - - 612.5 623.5 705.5 705.5 734 764 858 858
C144 595.5 595.5 623.5 623.5 654.5 707.5 718.5 804.5 804.5 - - - -
C162/163 - - - - - - - 778.5 778.5 807 837 931 931
C164 721.5 721.5 749.5 749.5 780.5 803.5 814.5 899.5 899.5 928 958 - -
C165 775 775 803 803 834 887 898 - - - - - -

Dimensions in mm.

198 WG20 Gear Units and Geared Motors www.weg.net

NEMA Adapter N56 to N364

l
la

m f

Ød
Ø n H7
p

ga
C
Ød

t α1 s
E
α

Type N56 N143/145 N182 N184 N213/215 N254/256 N284/286 N324/326 N364

p 170 170 250 250 300 225 280 350 400

n 114.3 114.3 215.9 215.9 215.9 215.9 266.7 317.5 317.5
la 13 13 10 16.8 10 30 35 15 15
m 149.225 149.225 184.15 184.15 184.15 184.15 228.6 279.4 279.4
t 4.5 4.5 5 3.2 5 5 3 5 5
s 11 11 14 14 14 14 14 19 19
α 90 90 90 90 90 90 90 90 90
α1 45 45 45 45 45 45 45 45 45
d 15.875 22.225 28.575 28.575 34.925 41.275 47.625 53.975 60.325
f 4.775 4.775 6.350 6.350 7.950 9.525 12.700 12.700 15.875
ga 18.008 24.486 31.521 31.521 38.557 45.618 53.238 59.690 67.335
E 1) 55 55 67.5 96.8 80.5 105.5 111.5 109.5 109.5
1) Maximum motor shaft length for motors with key

N56 N143/145 N182 N184 N213/215 N254/256 N284/286 N324/326 N364

Gear unit
size
l
C00 178.5 178.5 209.5 - - - - - -
C01 191 191 222 - - - - - -
C03 218.5 218.5 249.5 - - - - - -
C05 254 254 285 338 349 - - - -
C06 269 269 300 353 364 - - - -
C07 280.5 280.5 311.5 364.5 375.5 461.5 464.5 - -
C08 321.5 321.5 352.5 405.5 416.5 498.5 501.5 - -
C092/93 371 371 402 455 466 550.5 553.5 601 616.5
C094 453 453 484 538 549 - - - -
C102/103 407 407 438 491 502 586.5 589.5 637 652.5
C104 490 490 521 574 585 - - - -
C132/133 - - - 545.5 556.5 638.5 641.5 689 704.5
C134 557.5 557.5 588.5 641.5 652.5 738.5 741.5 - -
C142/143 - - - 612.5 623.5 705.5 708.5 756 771.5
C144 623.5 623.5 654.5 707.5 718.5 804.5 807.5 - -
C162/163 - - - - - 778.5 781.5 844.5 844.5
C164 749.5 749.5 780.5 803.5 814.5 899.5 902.5 950 965.5
C165 803 803 834 887 898 - - - -

www.weg.net WG20 Gear Units and Geared Motors 199

 SERVO Adapter S92 to S190

Shaft with key

f
l
la

ga
m

Ød
Ød

Ø n H7
□p
Smooth shaft
C t
α1
E s

α
Ød

Type S92 S105 S114 S115 S130 S141 S142 S180 S189 S190

p 101 144 144 144 144 144 144 197 197 197
n 80 95 95 110 110 110 130 114.3 130 180
la 17.5 31 31 31 31 31 31 35 32 38
m 100 115 130 130 145 165 165 200 215 215
t 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5
s M6x12 M8x16 M8x16 M8x16 M8x16 M8x16 M8x16 13.5 15 15
α 90° 90° 90° 90° 90° 90° 90° 90° 90° 90°
α1 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°
d 1) 14 16 19 19 19 24 19 24 19 22 24 28 24 24 32 35 32 38 38
f 5 5 6 6 6 8 6 8 6 6 8 8 8 8 10 10 10 10 10
ga 16.3 18.3 21.8 21.8 21.8 27.3 21.8 27.3 21.8 24.8 27.3 31.3 27.3 27.3 35.3 38.3 35.3 41.3 41.3
E 2) 46 46 34 67 67 54 67 54 76 63 63 63 54 63 63 66 74 60 87
E 3) 46 46 46 67 67 67 67 67 76 76 76 63 67 76 63 87 74 60 87
1) Other shaft diameters on request
2) Maximum motor shaft length for motors with key
3) Maximum motor shaft length for motors with smooth shaft

S92 S105 S114 S115 S130 S141 S142 S180 S189 S190
Gear unit
size
l
C00 216 264 264 264 264 264 264 - - -
C01 228.5 276.5 276.5 276.5 276.5 276.5 276.5 - - -
C03 256 304 304 304 304 304 304 - - -
C05 291.5 339.5 339.5 339.5 339.5 339.5 339.5 410 404 431
C06 306.5 354.5 354.5 354.5 354.5 354.5 354.5 425 419 446
C07 318 366 366 366 366 366 366 436.5 430.5 457.5
C08 359 407 407 407 407 407 407 477.5 471.5 498.5
C092/093 408.5 456.5 456.5 456.5 456.5 456.5 456.5 527 521 548
C094 490.5 538.5 538.5 538.5 538.5 538.5 538.5 610 604 631
C102/103 444.5 492.5 492.5 492.5 492.5 492.5 492.5 563 557 584
C104 527.5 575.5 575.5 575.5 575.5 575.5 575.5 646 640 667
C132/133 - - - - - - - 617.5 611.5 638.5
C134 595 643 643 643 643 643 643 713.5 707.5 734.5
C142/143 - - - - - - - 684.5 678.5 705.5
C144 661 709 709 709 709 709 709 779.5 773.5 800.5
C162/C163 - - - - - - - - - -
C164 787 835 835 835 835 835 835 875.5 869.5 896.5
C165 840.5 888.5 888.5 888.5 888.5 888.5 888.5 959 953 980

Dimensions in mm.

200 WG20 Gear Units and Geared Motors www.weg.net

Input Unit U2, U3

l
Z X
F

ØD

GA
ØN
E R ØD
C
Input Unit U5, U6, U7

l
X
ØD F
ØN

GA
ØD
E R

Input shaft [mm] Input shaft [mm]

28x60
Type 19x40 24x50 28x60 38x80 42x110 48x110 55x110
19x40 24x50 38x80 48x110 55x110
Gear unit
42x110
U2 U3 U5 U6 U7 size
U2 U3 U5 U6 U7
D 19 24 28 38 42 48 55
F 6 8 8 10 12 14 16 l
GA 21.5 27 31 41 45 51.5 59 C00 178.5 - - - -
E 40 50 60 80 110 110 110 C01 191 - - - -
N 73 101 178 235 290 C03 218.5 - - - -
X 2 2.5 1.9 6.5 4 C05 254 286 - - -
Z 3 35 - - - C06 269 301 - - -
R M6 M10 M10 M12 M16 M16 M20 C07 280.5 312.5 355 - -
C08 321.5 353.5 392 - -
C092/093 371 403 444 466 -
Tolerances C094 453 486 - - -
Dimension name ISO tolerance DIN EN ISO 286-2 C102/C103 407 439 480 502 -
C104 490 522 - - -
< Ø 55 mm k6
D C132/133 - 493.5 532 554 623
≥ Ø 55 mm m6 C134 557.5 489.5 632 - -
C142/143 - 560.5 599 621 690
C144 623.5 655.5 698 -
C162/C163 - - 672 694 763
C164 749.5 751.5 793 815 -
C165 803 835 - - -

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 201

C

202 WG20 Gear Units and Geared Motors www.weg.net

Parallel shaft gear units and
Parallel shaft geared motors F

F
 Technical Data
Size F02 F03 F04 F05 F06 F07 F08 F09 F10 F12 F15
Power [kW] 0.12 - 1.5 0.12 - 3.0 0.12 - 3.0 0.12 - 9.2 0.12 - 15 0.12 - 15 0.12 - 22 0.12 - 30 0.12 - 75 0.12 - 90 0.12 - 110
Torque [Nm] 130 220 400 600 820 1500 3000 4500 8000 13000 18000
3.93 3.85 4.26 4.98 4.41 4.29 4.09 4.16 4.38 4.64 5.84
Ratio - - - - - - - - - - -
97.85 70.17 422.98 487.67 412.64 385.37 3836.13 3086.96 2276.77 2307.03 24805.81
Number of stages 2 2 2/3 2/3 2/3 2/3 2/3/4 2/3/4 2/3/4 2/3/4 2/3/4/5
Housing material aluminium cast iron
Type with key acc. to DIN 6885.1 and threaded bore acc. to DIN 332 sheet 2
Solid shaft Tolerance < Ø 55: k6 / ≥ Ø 55: m6
Material standard: C45E (1.1191) / stainless steel on request
Type with key acc. to DIN 6885.1
Hollow
Tolerance H7
shaft
Material standard: C45E (1.1191) / stainless steel on request
Tolerance centring ≤ 250: j6 / > 250: h6 acc. to DIN EN 50347
Flanges
Material cast iron
F Gear wheels
Type honed - designed and produced according to DIN 3990/3991 - Q7
Material 16MnCr5 (1.7131) case hardened – minimum 58HRC
Type type AS acc. to DIN 3760
Shaft seals
Material standard NBR / special FKM
Bearing standard / reinforced
Type standard CLP ISO VG 220 / special CLP HC ISO VG 220
Lubricants
Quantity depending on mounting position
Axle height acc. to DIN 747: ≤ 50: -0.4; > 50 to ≤ 250: -0.5; > 250: -1

General information
1. Nameplate

h
WG20 WEG Gear Systems GmbH MADE IN i
2753 Markt Piesting, Austria AUSTRIA
www.weg-gears.net 31JAN24 j
a FH052-11P-90S/L-04F-TH-TF SN: 24A01625 k
Mat.: l
b P1 1.5 kW rpm 26 @ 50 Hz m
c M2 557 Nm i 56.42 n
d fB 1.1 M1 o
e Oil 2.0l-ISO VG 220 CLP p
f 34.3 kg q

a Type code j Production date

b Motor power k Serial number

c Output torque l Material number

d Service factor m Output speed and Frequency

e Type and quantity of lubricant n Total gear ratio

f Weight o Mounting position

g Space for ATEX code (if applicable) p QR-Code linked online to additional information

h Manufacturer address q Space for additional information

i Country of origin

204 WG20 Gear Units and Geared Motors www.weg.net

2. Type code

FH073-EX-11P-90S/L-04F ...
1 2 3 4 5 6 7 8 9 10

FH073-EX-I112-HT
1 2 3 4 5 11 12

1 Type: F = Parallel shaft gear unit

2 Design: B = Output shaft on both sides

D = Hollow shaft with shrink disc
F = B5 flange execution with output shaft
F
H = Hollow shaft
O = B5 flange execution with hollow shaft
P = B5 flange execution with hollow shaft and shrink disc
S = Output shaft
T = Hollow shaft with rubber buffer
U = Hollow shaft with shrink disc and rubber buffer

3 Size: 02 03 04 05 06 07 08 09 10 12 15

4 Number of stages: 2 = 2 gear stages 3 = 3 gear stages
4 = 4 gear stages 5 = 5 gear stages

5 ATEX execution: when operated in explosive atmospheres, see page 15

6 Motor type: 14P = Integral motor aluminium IE3

11P = Integral motor aluminium IE3
11S = Integral motor aluminium IE4
22P = Integral motor cast iron IE3
22S = Integral motor cast iron IE4

7 Motor frame size: 63 71 80 L80 90S/L 100L L100L 112M 132S

132M L132M 160M 160L 180M 180L 200L 225S/M 280S/M

8 Number of poles: 04 = 4 poles 06 = 6 poles

9 Power indicator: D E F G

10 Motor modules: see from page 595

11 Adapters, Input unit: IEC adapter I63 I71 I80 I90 I100 I112 I132
I160 I180 I200 I225 I250 I280

NEMA adapter N56 N143 N182 N184 N213

N254 N284 N324 N364

SERVO adapter S92 S105 S114 S115 S130

S141 S142 S180 S189 S190

Input unit U2 U3 U5 U6 U7

IEC63 IEC71 IEC80 IEC90 IEC100 IEC112

Direct mounting (IEC):
IEC132 IEC160 IEC180 IEC200 IEC225 IEC250 IEC280

12 High/Low temperature execution: HT LT

Type code Motor see page 565

www.weg.net WG20 Gear Units and Geared Motors 205

 3. Range

Size F02 F03 F04 F05 F06 F07 F08 F09 F10 F12 F15

Housing material Aluminium Cast iron

4. Design

B D F H
F

O P S T

B5 flange execution
B Output shaft on both sides P with hollow shaft and shrink disc
D Hollow shaft with shrink disc S Output shaft
B5 flange execution
F T Hollow shaft with rubber buffer
with output shaft
Hollow shaft with shrink disc
H Hollow shaft U and rubber buffer
U B5 flange execution
O with hollow shaft

5. Venting the gear unit

The parallel shaft gear unit sizes F02 to F05 are neither equipped with a venting nor an oil drain screw.
They are supplied with lifetime-lubrication. a
By default, the parallel shaft gear units from F06 are equipped with venting screws with a safety
strap for transportation (see illustration). The rubber strap (a) of the venting screw must be removed
entirely before the initial startup. The venting screw is placed accordingly to the mounting position
(see chapter Mounting positions, page 209)

6. Overhung and axial loads

The overhung loads (FrN) indicated in the respective selection tables apply to gear units with the force acting on the
shaft center (x=l/2). The permissible overhung loads listed are based on the least favourable loading direction
and calculated for standard shafts and standard bearings. Other load directions and action can be calculated with
equations Q1 to Q3. If transmission elements are placed on the output shaft, an appropriate factor (fz) has to
be taken into consideration when determining the overhung load.

Gear wheels Sprockets V-belts Flat belts

fz=1.1 fz=1.2 fz=1.1

fz=1.8 fz=2.5
(z≤17) (z≤13) (z>13)

206 WG20 Gear Units and Geared Motors www.weg.net

 Use the following equations Q1 and Q2 to calculate the permissible radial loads on the output shaft. Q3 is to calculate
the real existing shaft loads for your application. The results are to be compared by using the equation Q4.

Variable Unit Description

Q1 FzL = FrN · a1 a1 Load action factor - output shaft bearing from Table 1
a2 Load action factor - output shaft from Table 1
d0 [m] Effective diameter of the transmission element
Q2 FzW = FW · a2 Geared motor output torque (from selection tables)
M2 [Nm]
or required calculated output torque

FzL [N] Permissible overhung load for output shaft bearings

2 · M2
Q3 FQvorh = d0
· fz FzW [N] Permissible overhung load for output shaft
FrN [N] Permissible overhung load from selection tables

Permissible overhung load -

FW [N]
FQvorh ≤ FzL Output shaft x=l/2 from Table 2

F
FQvorh [N] Existing overhung load at gear shaft
Q4 fz Factor for transmission element

FQvorh ≤ FzW Mmax [Nm]

Highest possible output torque
for coupling operation (Table 2)

Always use both equations Q1 and Q2 for your calculations.

Output shaft Hollow shaft
x/l
0 0.25 0.5 0.75 1 1.5 2 l l
a1 → Equation Q1 x x
Ød

1.39 1.18 1.00 0.85 0.73 0.52 0.38

Fr Fr
a 2 → Equation Q2

2.00 2.00 1.00 0.55 0.38 0.23 0.17

Table 1: Load action factors a1, a2

Intermediate values can be interpolated linearly. Combined load (Fr ≠ 0; Fa = 0) on request.

Output shaft Output torque M2 [Nm]

[mm] Mmax
130 220 400 600 820 1500 3000 4500 8000 13000 18000
at Fr = 0
Ød l F w [kN] at x/l = 0.5 → Equation Q2

20 40 160 2.2

25 50 300 5.5 4.5

30 60 500 7.5 7.0 5.0

35 70 800 11.0 10.0 8.3

40 80 1170 13.0 12.0 10.7

50 100 2250 24.0 24.0 23.0 21.0

60 120 3740 31.0 30.0 23.0

70 140 5850 45.0 41.0 36.0

90 170 11700 72.0 70.0 61.0

110 210 20800 106.0 103.0 93.0

120 210 26700 129.0 121.0 109.0

Table 2: Permissible overhung load - output shaft x = l/2

The axial loads (FaN) for the respective execution (output shaft or hollow shaft), given in the following selection tables,
are valid at radial force FrN = 0. If there are axial loads or radial and axial components acting on the drive which are
extraordinarily high, we recommend to contact the manufacturer.

www.weg.net WG20 Gear Units and Geared Motors 207

 7. Mounting positions, Position of the terminal box and Cable entry

Mounting positions - Sizes F02 to F05

Gear units F02 to F05 are not ventilated and supplied with lifetime lubrication

Reference area

M1
F
M6 M2

M4 M5

M3

Position of the terminal box Cable entry Side indication

Standard: Position 1 Standard: Position I

2
I III
I III
III

1 3 II IV
I
III I
III I A B

208 WG20 Gear Units and Geared Motors www.weg.net

 Mounting positions - Sizes F06 to F15

Venting screw Position visible on this side

Oil drain screw F06 Position covered or on the

F07
F08-F15 far side of the gear unit
Oil level plug

Reference area F08

F09-F15

M1
F06 and F07
not possible
F06-F08 F09-F15
F
F06-F07

M6 M2
F09-F15

F08 not possible

F07-F08 F09-F15

M4 M5
F09-F15 F06-F07
F09-F15 F06-F08
F06 not possible F08 not possible

M3
F09-F15
F06-F08

F06
F08-F15 F07

Position of the terminal box Cable entry Side indication

Standard: Position 1 Standard: Position I

2
I III
I III
III

1 3 II IV
I
III I
III I A B

www.weg.net WG20 Gear Units and Geared Motors 209

F

210 WG20 Gear Units and Geared Motors www.weg.net

Selection tables - Geared motors
The technical data of the geared motors shown in the selection tables apply to an ambient temperature of +20 °C.

The selection tables are calculated with following motor data:

Power (IEC frame size) Motor series (IE class)

up to 0.55 kW (63 - 80) 14P (IE3) - aluminium

0.75 - 9.2 kW (80 - 132) 11P (IE3) - aluminium

11 - 75 kW (160 - 250) 22P (IE3) - cast iron

75 - 110 kW (280) 22S (IE4) - cast iron

Structure of the selection tables

F
1 2

PN = 0.12 kW IE3
50 Hz 60 Hz at 50 Hz

0.12 kW 0.14 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg

3 4 5 6 7 8 9 10 11 12 13 14

1 Rated power of the motor

2 Given values are based on the respective efficiency class

3 Output speed at 50 Hz

4 Output speed at 60 Hz

5 Output torque

6 Service factor

7 Total ratio

8 Permissible radial load - Execution with output shaft at midpoint of the shaft (standard bearing) at axial load=0

9 Permissible axial load - Execution with output shaft (standard bearing) at axial load=0

10 Permissible radial load - Execution with hollow shaft at midpoint of x=l/2 (standard bearing) at axial load=0

11 Permissible axial load - Execution with hollow shaft (standard bearing) at axial load=0

12 Geared motor type

13 Weight

14 Page refererence for dimension sheet

*) Increased rated power at 60 Hz can only be reached together with increased voltage within the wide range
(for details see page 574).
Increased rated power

1.2 x PN

www.weg.net WG20 Gear Units and Geared Motors 211

 PN = 0.12 kW IE3
50 Hz 60 Hz at 50 Hz

0.12 kW 0.14 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.05 0.07 18714 1.00 17143.10 75.1 114.6 75.1 114.6
0.06 0.07 17440 1.05 16017.35 80.4 115.7 80.4 115.7
0.07 0.08 15147 1.20 14018.89 88.3 117.6 88.3 117.6
0.08 0.10 11746 1.55 11069.46 97.1 120.4 97.1 120.4
FH155-14P-63-06F 685 346
0.09 0.11 10703 1.70 10164.86 99.2 121.2 99.2 121.2
0.11 0.13 8875 2.05 8582.99 102.4 122.7 102.4 122.7
0.12 0.15 8007 2.25 7824.26 103.7 123.4 103.7 123.4
0.13 0.16 7078 2.55 7024.85 104.9 124.2 104.9 124.2
0.06 0.07 17782 1.05 24805.81 79.0 115.4 79.0 115.4
0.07 0.08 14355 1.30 20285.13 90.6 118.2 90.6 118.2
0.08 0.10 12008 1.50 17143.10 96.5 120.1 96.5 120.1
F 0.09
0.10
0.11
0.12
11133
9619
1.65
1.90
16017.35
14018.89
98.4
101.2
120.9
122.1
98.4
101.2
120.9
122.1
FH155-14P-63-04E 685 346

0.11 0.14 8411 2.15 12419.47 103.1 123.1 103.1 123.1

0.13 0.16 7381 2.45 11069.46 104.5 123.9 104.5 123.9
0.14 0.17 6690 2.70 10164.86 105.3 124.5 105.3 124.5
0.30 0.37 3407 1.35 3086.96 33.6 40.5 33.6 40.5
0.35 0.44 2851 1.60 2609.75 35.6 41.2 35.6 41.2
0.37 0.45 2752 1.65 2524.38 35.9 41.4 35.9 41.4
0.43 0.53 2293 2.00 2134.14 37.2 42.0 37.2 42.0 FH094-14P-63-06F 175 332
0.46 0.57 2128 2.15 1993.28 37.6 42.2 37.6 42.2
0.55 0.68 1770 2.55 1685.14 38.3 42.7 38.3 42.7
0.60 0.74 1603 2.85 1545.54 38.6 42.9 38.6 42.9
0.46 0.56 2174 2.10 3086.96 37.5 42.1 37.5 42.1
0.54 0.66 1808 2.50 2609.75 38.2 42.6 38.2 42.6 FH094-14P-63-04E 175 332
0.56 0.68 1742 2.60 2524.38 38.4 42.7 38.4 42.7
0.29 0.36 3534 0.85 3137.02 ** ** ** **
0.30 0.38 3413 0.90 3036.24 15.2 25.1 15.2 7.2
0.35 0.43 2962 1.05 2651.12 19.7 34.8 19.7 7.9
0.37 0.46 2768 1.10 2482.91 21.2 38.1 21.2 8.2
0.43 0.53 2402 1.25 2167.97 23.5 41.3 23.5 8.8
0.47 0.58 2159 1.40 1960.53 24.7 41.7 24.7 9.2
0.48 0.59 2111 1.45 1920.62 25.0 41.7 25.0 9.2
FH084-14P-63-06F 121 328
0.54 0.67 1866 1.65 1711.85 26.0 42.1 26.0 9.6
0.59 0.73 1703 1.80 1571.96 26.6 42.4 26.6 9.9
0.61 0.75 1643 1.85 1520.15 26.8 42.5 26.8 10.0
0.70 0.86 1417 2.15 1327.33 27.5 42.8 27.5 10.3
0.74 0.92 1320 2.30 1244.18 27.8 43.0 27.8 10.5
0.76 0.94 1281 2.35 1209.99 27.9 43.0 27.9 10.5
0.85 1.0 1136 2.65 1086.37 28.2 43.2 28.2 10.7
0.37 0.45 2816 1.10 3836.13 20.8 37.3 20.8 8.2
0.45 0.55 2279 1.35 3137.02 24.1 41.5 24.1 9.0
0.46 0.57 2202 1.40 3036.24 24.5 41.6 24.5 9.1
0.53 0.65 1906 1.60 2651.12 25.9 42.1 25.9 9.6
0.57 0.69 1778 1.70 2482.91 26.3 42.3 26.3 9.8
0.65 0.79 1533 2.00 2167.97 27.2 42.6 27.2 10.1 FH084-14P-63-04E 120 328
0.72 0.88 1375 2.20 1960.53 27.6 42.9 27.6 10.4
0.73 0.90 1344 2.25 1920.62 27.7 42.9 27.7 10.4
0.82 1.0 1183 2.55 1711.85 28.1 43.2 28.1 10.7
0.89 1.1 1075 2.80 1571.96 28.3 43.3 28.3 10.8
0.92 1.1 1036 2.90 1520.15 28.4 43.4 28.4 10.9
2.2 2.8 511 1.65 412.64 11.1 13.6 11.1 3.6
2.4 3.0 469 1.75 378.37 11.3 13.7 11.3 3.8
2.7 3.4 418 2.00 337.44 11.6 13.9 11.6 3.9
FH063-14P-63-06F 37 322
3.0 3.7 383 2.15 309.42 11.7 14.0 11.7 4.0
3.5 4.3 330 2.50 266.44 11.9 14.2 11.9 4.2
3.8 4.7 303 2.75 244.32 12.0 14.3 12.0 4.3
3.4 4.2 337 2.45 412.64 11.9 14.2 11.9 4.2
3.7 4.5 309 2.70 378.37 12.0 14.2 12.0 4.3 FH063-14P-63-04E 37 322
4.2 5.1 275 3.00 337.44 12.1 14.4 12.1 4.4

Legend see page 211 ** ... on request

212 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.12 kW IE3
50 Hz 60 Hz at 50 Hz

0.12 kW 0.14 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
1.9 2.3 604 1.00 487.67 6.0 10.2 6.0 3.5
2.1 2.6 552 1.10 445.56 6.8 10.3 6.8 3.6
2.4 3 471 1.30 379.87 7.7 10.6 7.7 3.9
2.7 3.3 430 1.40 347.07 8.1 10.7 8.1 4.0
3.0 3.7 382 1.60 308.00 8.5 10.8 8.5 4.1
FH053-14P-63-06F 21 320
3.3 4.1 349 1.75 281.41 8.7 10.9 8.7 4.2
3.8 4.7 301 2.00 242.67 9.0 11.1 9.0 4.4
4.2 5.1 275 2.20 221.71 9.1 11.2 9.1 4.5
4.9 6.1 232 2.60 187.00 9.3 11.3 9.3 4.6
5.4 6.7 212 2.85 170.85 9.4 11.3 9.4 4.6
2.9 3.5 398 1.55 487.67 8.3 10.8 8.3 4.1
3.2
3.7
3.9
4.5
363
310
1.65
1.95
445.56
379.87
8.6
8.9
10.9
11.1
8.6
8.9
4.2
4.4
F
FH053-14P-63-04E 21 320
4.0 5.0 283 2.15 347.07 9.1 11.1 9.1 4.4
4.6 5.6 251 2.40 308.00 9.2 11.2 9.2 4.5
5.0 6.1 230 2.65 281.41 9.3 11.3 9.3 4.6
2.2 2.7 524 0.80 422.98 ** ** ** **
2.4 3.0 478 0.85 385.85 ** ** ** **
2.8 3.5 408 1.00 329.48 3.6 5.7 3.6 2.4
3.1 3.8 372 1.10 300.55 4.4 7.5 4.4 2.6
3.5 4.3 331 1.25 267.14 5.1 8.3 5.1 2.7
3.8 4.7 302 1.35 243.69 5.4 8.4 5.4 2.8
FH043-14P-63-06F 15 318
4.4 5.4 261 1.55 210.48 5.9 8.6 5.9 3.0
4.8 5.9 238 1.70 192.00 6.1 8.7 6.1 3.1
5.7 7.0 201 2.00 162.19 6.4 8.8 6.4 3.2
6.3 7.7 183 2.20 147.96 6.5 8.9 6.5 3.3
7.3 9.0 157 2.55 126.72 6.6 8.9 6.6 3.3
8.0 9.9 143 2.80 115.60 6.7 9.0 6.7 3.4
3.3 4.1 345 1.20 422.98 4.8 8.3 4.8 2.7
3.6 4.5 315 1.30 385.85 5.3 8.4 5.3 2.8
4.3 5.2 269 1.50 329.48 5.8 8.5 5.8 2.9
4.7 5.7 245 1.65 300.55 6.0 8.6 6.0 3.0
FH043-14P-63-04E 15 318
5.3 6.4 218 1.85 267.14 6.3 8.7 6.3 3.1
5.8 7.1 199 2.05 243.69 6.4 8.8 6.4 3.2
6.7 8.2 172 2.35 210.48 6.6 8.9 6.6 3.3
7.3 9.0 157 2.60 192.00 6.6 8.9 6.6 3.3
13 16 87 2.55 70.17 4.9 3.1 4.9 3.1
FH032-14P-63-06F 14 316
15 18 79 2.80 63.63 5.0 3.3 5.0 3.3
9.5 12 121 1.10 97.85 4.8 2.0 4.8 2.0
11 13 109 1.20 88.09 4.9 2.3 4.9 2.3
12 15 94 1.40 76.22 5.0 2.2 5.0 2.2
13 17 85 1.55 68.62 5.0 2.4 5.0 2.4
15 18 77 1.70 61.80 5.1 2.3 5.1 2.3
17 20 69 1.90 55.64 5.1 2.4 5.1 2.4 FH022-14P-63-06F 11 314
19 23 60 2.20 48.69 5.1 2.4 5.1 2.4
21 26 54 2.40 43.83 5.2 2.5 5.2 2.5
25 30 46 2.80 37.52 5.2 2.5 5.2 2.5
29 36 39 1.35 31.79 5.2 2.6 5.2 2.6
37 46 31 2.75 24.76 5.2 2.6 5.2 2.6

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 213

 PN = 0.12 kW IE3
50 Hz 60 Hz at 50 Hz

0.12 kW 0.14 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
14 18 80 1.65 97.85 5.1 2.3 5.1 2.3
16 20 72 1.85 88.09 5.1 2.4 5.1 2.4
18 23 62 2.10 76.22 5.1 2.4 5.1 2.4
20 25 56 2.35 68.62 5.2 2.5 5.2 2.5
23 28 50 2.60 61.80 5.2 2.5 5.2 2.5
25 31 45 2.90 55.64 5.2 2.6 5.2 2.6
29 35 40 3.30 48.69 5.2 2.5 5.2 2.5
32 39 36 3.65 43.83 5.2 2.6 5.2 2.6
37 46 31 4.25 37.52 5.2 2.6 5.2 2.6
42 51 28 4.75 33.78 5.2 2.6 5.2 2.6
44 54 26 2.05 31.79 5.2 2.6 5.2 2.6
F 48
53
59
65
24
22
5.45
6.05
29.32
26.39
5.2
5.2
2.6
2.7
5.2
5.2
2.6
2.7
57 69 20 4.20 24.76 5.2 2.7 5.2 2.7 FH022-14P-63-04E 11 314
64 79 18 7.30 21.89 5.2 2.6 5.2 2.6
70 86 16 5.15 20.08 5.3 2.7 5.3 2.7
71 87 16 8.10 19.70 5.3 2.7 5.3 2.7
85 104 13 9.70 16.48 5.2 2.7 5.2 2.7
89 109 13 6.55 15.82 5.1 2.7 5.1 2.7
95 116 12 10.75 14.84 5.0 2.7 5.0 2.7
115 141 10 8.45 12.19 4.7 2.7 4.7 2.7
116 142 10 13.20 12.09 4.7 2.7 4.7 2.7
129 158 9 14.65 10.89 4.5 2.7 4.5 2.7
148 181 8 10.85 9.52 4.3 2.7 4.3 2.7
198 242 6 14.50 7.11 3.9 2.7 3.9 2.7
263 321 4 19.25 5.35 3.5 2.7 3.5 2.7
358 438 3 22.50 3.93 3.2 2.7 3.2 2.7

Legend see page 211

214 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.18 kW IE3
50 Hz 60 Hz at 50 Hz

0.18 kW 0.22 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.06 0.08 23835 0.80 14018.89 ** ** ** **
0.07 0.09 21008 0.90 12419.47 63.4 109.6 63.4 109.6
0.08 0.10 18629 1.00 11069.46 75.5 114.7 75.5 114.7
0.09 0.11 17019 1.10 10164.86 82.0 116.0 82.0 116.0
0.10 0.13 14223 1.30 8582.99 91.0 118.3 91.0 118.3
0.12 0.14 12899 1.40 7824.26 94.4 119.4 94.4 119.4 FH155-14P-71-06E 688 346
0.13 0.16 11463 1.60 7024.85 97.7 120.6 97.7 120.6
0.15 0.19 9498 1.90 5911.67 101.4 122.2 101.4 122.2
0.17 0.21 8598 2.10 5407.29 102.8 122.9 102.8 122.9
0.19 0.23 7574 2.40 4838.19 104.2 123.8 104.2 123.8
0.22 0.27 6231 2.90 4085.50 105.8 124.9 105.8 124.9
0.07
0.08
0.08
0.10
22436
18815
0.85
1.00
20285.13
17143.10
**
74.7
**
114.6
**
74.7
**
114.6
F
0.09 0.11 17535 1.05 16017.35 80.0 115.6 80.0 115.6
0.10 0.12 15229 1.20 14018.89 88.0 117.5 88.0 117.5
0.11 0.14 13388 1.35 12419.47 93.2 119.0 93.2 119.0
FH155-14P-63-04F 685 346
0.12 0.15 11810 1.55 11069.46 97.0 120.3 97.0 120.3
0.14 0.17 10762 1.70 10164.86 99.1 121.2 99.1 121.2
0.16 0.20 8924 2.05 8582.99 102.3 122.7 102.3 122.7
0.18 0.22 8051 2.25 7824.26 103.6 123.4 103.6 123.4
0.20 0.24 7116 2.55 7024.85 104.8 124.2 104.8 124.2
0.40 0.49 3748 2.15 2276.77 58.8 65.0 58.8 65.0
0.46 0.56 3206 2.50 1976.36 59.6 65.6 59.6 65.6
FH104-14P-71-06E 283 336
0.51 0.63 2810 2.85 1757.78 60.2 66.0 60.2 66.0
0.53 0.65 2719 2.95 1707.58 60.3 66.1 60.3 66.1
0.29 0.36 5361 0.85 3086.96 ** ** ** **
0.34 0.43 4505 1.00 2609.75 27.9 39.0 27.9 39.0
0.36 0.44 4348 1.05 2524.38 28.9 39.2 28.9 39.2
0.42 0.52 3646 1.25 2134.14 32.6 40.2 32.6 40.2
0.45 0.56 3391 1.35 1993.28 33.6 40.5 33.6 40.5
0.53 0.66 2838 1.60 1685.14 35.6 41.2 35.6 41.2 FH094-14P-71-06E 178 332
0.58 0.72 2587 1.75 1545.54 36.4 41.6 36.4 41.6
0.69 0.85 2155 2.10 1306.62 37.5 42.1 37.5 42.1
0.71 0.88 2078 2.20 1264.97 37.7 42.2 37.7 42.2
0.84 1.0 1724 2.65 1069.42 38.4 42.7 38.4 42.7
0.92 1.1 1553 2.90 973.69 38.7 42.9 38.7 42.9
0.45 0.55 3425 1.35 3086.96 33.5 40.5 33.5 40.5
0.53 0.65 2866 1.60 2609.75 35.6 41.2 35.6 41.2
0.55 0.67 2767 1.65 2524.38 35.9 41.3 35.9 41.3
0.65 0.80 2310 1.95 2134.14 37.1 41.9 37.1 41.9 FH094-14P-63-04F 175 332
0.69 0.85 2144 2.10 1993.28 37.5 42.2 37.5 42.2
0.82 1.0 1779 2.55 1685.14 38.3 42.6 38.3 42.6
0.89 1.1 1615 2.80 1545.54 38.6 42.9 38.6 42.9
0.42 0.51 3773 0.80 2167.97 ** ** ** **
0.46 0.57 3398 0.90 1960.53 15.4 25.6 15.4 7.3
0.47 0.58 3322 0.95 1920.62 16.3 27.5 16.3 7.4
0.53 0.65 2949 1.05 1711.85 19.8 35.1 19.8 8.0
0.57 0.71 2697 1.15 1571.96 21.7 39.2 21.7 8.3
0.59 0.73 2602 1.20 1520.15 22.3 40.6 22.3 8.5
0.68 0.84 2258 1.35 1327.33 24.3 41.5 24.3 9.0
0.72 0.89 2108 1.45 1244.18 25.0 41.7 25.0 9.2 FH084-14P-71-06E 123 328
0.74 0.92 2046 1.50 1209.99 25.3 41.8 25.3 9.3
0.83 1.0 1826 1.65 1086.37 26.2 42.2 26.2 9.7
0.94 1.2 1593 1.90 957.69 27.0 42.5 27.0 10.0
0.98 1.2 1514 2.00 914.22 27.2 42.7 27.2 10.2
1.1 1.3 1374 2.20 836.22 27.6 42.9 27.6 10.4
1.2 1.5 1214 2.50 748.21 28.0 43.1 28.0 10.6
1.4 1.8 1004 3.00 631.81 28.5 43.5 28.5 11.0

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 215

 PN = 0.18 kW IE3
50 Hz 60 Hz at 50 Hz

0.18 kW 0.22 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.44 0.54 3553 0.85 3137.02 ** ** ** **
0.45 0.56 3432 0.90 3036.24 14.9 24.5 14.9 7.2
0.52 0.64 2978 1.05 2651.12 19.6 34.6 19.6 7.9
0.56 0.68 2784 1.10 2482.91 21.1 37.9 21.1 8.2
0.64 0.78 2416 1.25 2167.97 23.4 41.3 23.4 8.8
0.70 0.87 2171 1.40 1960.53 24.7 41.7 24.7 9.2
0.72 0.89 2122 1.45 1920.62 24.9 41.7 24.9 9.2 FH084-14P-63-04F 121 328
0.81 0.99 1880 1.60 1711.85 26.0 42.1 26.0 9.6
0.88 1.1 1716 1.75 1571.96 26.6 42.4 26.6 9.9
0.91 1.1 1652 1.85 1520.15 26.8 42.5 26.8 10.0
1.0 1.3 1425 2.15 1327.33 27.5 42.8 27.5 10.3
F 1.1
1.3
1.4
1.6
1327
1142
2.30
2.65
1244.18
1086.37
27.8
28.2
43.0
43.2
27.8
28.2
10.5
10.7
2.3 2.9 736 2.05 385.37 19.4 17.5 19.4 6.3
FH073-14P-71-06E 63 324
2.9 3.6 583 2.60 305.42 19.8 17.8 19.8 6.6
2.2 2.7 788 1.05 412.64 8.9 12.7 8.9 2.8
2.4 2.9 723 1.15 378.37 9.6 12.9 9.6 2.9
2.7 3.3 645 1.30 337.44 10.2 13.2 10.2 3.2
2.9 3.6 591 1.40 309.42 10.6 13.3 10.6 3.4
3.4 4.2 509 1.65 266.44 11.1 13.6 11.1 3.7
FH063-14P-71-06E 40 322
3.7 4.5 467 1.80 244.32 11.4 13.7 11.4 3.8
4.4 5.4 395 2.10 206.59 11.7 14.0 11.7 4.0
4.8 5.9 362 2.30 189.44 11.8 14.1 11.8 4.1
5.3 6.6 323 2.55 169.09 11.9 14.2 11.9 4.3
5.8 7.2 296 2.80 155.05 12.0 14.3 12.0 4.3
3.3 4.1 514 1.60 412.64 11.1 13.6 11.1 3.6
3.6 4.5 471 1.75 378.37 11.3 13.7 11.3 3.8
4.1 5.0 420 2.00 337.44 11.6 13.9 11.6 3.9
FH063-14P-63-04F 37 322
4.5 5.5 385 2.15 309.42 11.7 14.0 11.7 4.0
5.2 6.4 332 2.50 266.44 11.9 14.2 11.9 4.2
5.6 7.0 304 2.70 244.32 12.0 14.3 12.0 4.3
2.4 2.9 726 0.85 379.87 ** ** ** **
2.6 3.2 663 0.95 347.07 4.9 7.8 4.9 3.3
2.9 3.6 588 1.05 308.00 6.3 10.2 6.3 3.5
3.2 3.9 537 1.15 281.41 7.0 10.3 7.0 3.6
3.7 4.6 463 1.30 242.67 7.8 10.6 7.8 3.9
4.1 5.0 423 1.45 221.71 8.1 10.7 8.1 4.0 FH053-14P-71-06E 23 320
4.8 5.9 357 1.70 187.00 8.6 10.9 8.6 4.2
5.3 6.5 326 1.85 170.85 8.8 11.0 8.8 4.3
6.2 7.6 279 2.20 146.10 9.1 11.1 9.1 4.4
6.7 8.3 255 2.35 133.49 9.2 11.2 9.2 4.5
8.3 10 208 2.90 109.08 9.4 11.4 9.4 4.7
2.8 3.5 607 1.00 487.67 6.0 10.1 6.0 3.4
3.1 3.8 555 1.10 445.56 6.7 10.3 6.7 3.6
3.6 4.5 473 1.30 379.87 7.7 10.6 7.7 3.9
4.0 4.9 432 1.40 347.07 8.1 10.7 8.1 4.0
4.5 5.5 384 1.60 308.00 8.4 10.8 8.4 4.1
FH053-14P-63-04F 21 320
4.9 6.0 351 1.75 281.41 8.7 10.9 8.7 4.2
5.7 7.0 302 2.00 242.67 9.0 11.1 9.0 4.4
6.2 7.7 276 2.20 221.71 9.1 11.1 9.1 4.4
7.4 9.1 233 2.60 187.00 9.3 11.3 9.3 4.6
8.1 10 213 2.85 170.85 9.4 11.3 9.4 4.6
10 13 167 2.25 87.38 9.5 11.5 9.5 4.8
11 14 152 2.25 79.84 9.6 11.5 9.6 4.8 FH052-14P-71-06E 23 320
19 23 92 2.25 48.15 9.7 11.6 9.7 4.9

Legend see page 211 ** ... on request

216 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.18 kW IE3
50 Hz 60 Hz at 50 Hz

0.18 kW 0.22 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
3.4 4.2 510 0.80 267.14 ** ** ** **
3.7 4.6 465 0.90 243.69 1.5 1.4 1.5 1.4
4.3 5.3 402 1.00 210.48 3.8 6.2 3.8 2.5
4.7 5.8 367 1.10 192.00 4.5 7.7 4.5 2.6
5.5 6.8 310 1.30 162.19 5.3 8.4 5.3 2.8
6.1 7.5 283 1.45 147.96 5.7 8.5 5.7 2.9 FH043-14P-71-06E 17 318
7.1 8.8 242 1.70 126.72 6.1 8.6 6.1 3.0
7.8 9.6 221 1.85 115.60 6.2 8.7 6.2 3.1
9.5 12 181 2.25 94.61 6.5 8.9 6.5 3.3
10 13 165 2.45 86.31 6.6 8.9 6.6 3.3
13 16 136 2.95 71.24 6.7 9.0 6.7 3.4
3.3
3.6
4.0
4.4
527
481
0.80
0.85
422.98
385.85
**
**
**
**
**
**
**
**
F
4.2 5.2 410 1.00 329.48 3.6 5.7 3.6 2.4
4.6 5.7 374 1.10 300.55 4.3 7.3 4.3 2.6
5.2 6.4 333 1.25 267.14 5.0 8.3 5.0 2.7
5.7 7.0 304 1.35 243.69 5.4 8.4 5.4 2.8
FH043-14P-63-04F 15 318
6.6 8.1 262 1.55 210.48 5.9 8.6 5.9 3.0
7.2 8.9 239 1.70 192.00 6.1 8.7 6.1 3.1
8.5 10 202 2.00 162.19 6.4 8.8 6.4 3.2
9.3 11 184 2.20 147.96 6.5 8.9 6.5 3.3
11 13 158 2.55 126.72 6.6 8.9 6.6 3.3
12 15 144 2.80 115.60 6.7 9.0 6.7 3.4
12 15 145 2.25 75.79 6.7 9.0 6.7 3.4
13 16 132 2.25 69.14 6.8 9.0 6.8 3.4 FH042-14P-71-06E 17 318
22 27 79 2.25 41.20 6.9 9.1 6.9 3.5
13 16 134 1.65 70.17 4.6 2.8 4.6 2.8
14 17 122 1.85 63.63 4.7 3.1 4.7 3.1
16 19 109 2.05 57.07 4.8 3.0 4.8 3.0
17 21 99 2.25 51.75 4.8 3.2 4.8 3.2 FH032-14P-71-06E 16 316
20 24 87 2.55 45.35 4.9 3.1 4.9 3.1
22 27 79 2.85 41.12 5.0 3.3 5.0 3.3
33 40 53 2.30 27.67 5.1 3.4 5.1 3.4
20 24 87 2.55 70.17 4.9 3.1 4.9 3.1
FH032-14P-63-04F 14 316
22 27 79 2.80 63.63 5.0 3.3 5.0 3.3
10 13 168 0.80 88.09 ** ** ** **
12 15 146 0.90 76.22 4.6 1.9 4.6 1.9
13 16 131 1.00 68.62 4.7 2.2 4.7 2.2
15 18 118 1.15 61.80 4.8 2.0 4.8 2.0
16 20 106 1.25 55.64 4.9 2.3 4.9 2.3
18 23 93 1.40 48.69 5.0 2.2 5.0 2.2
21 25 84 1.60 43.83 5.0 2.4 5.0 2.4
24 30 72 1.85 37.52 5.1 2.3 5.1 2.3 FH022-14P-71-06E 14 314
27 33 65 2.05 33.78 5.1 2.5 5.1 2.5
28 35 61 0.90 31.79 5.1 2.5 5.1 2.5
31 38 56 2.35 29.32 5.2 2.4 5.2 2.4
34 42 50 2.60 26.39 5.2 2.5 5.2 2.5
36 45 47 1.80 24.76 5.2 2.5 5.2 2.5
45 55 38 2.20 20.08 5.2 2.6 5.2 2.6
57 70 30 2.80 15.82 5.2 2.6 5.2 2.6

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 217

 PN = 0.18 kW IE3
50 Hz 60 Hz at 50 Hz

0.18 kW 0.22 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
14 17 122 1.10 97.85 4.8 2.0 4.8 2.0
16 19 110 1.20 88.09 4.9 2.3 4.9 2.3
18 22 95 1.40 76.22 5.0 2.2 5.0 2.2
20 25 85 1.55 68.62 5.0 2.4 5.0 2.4
22 28 77 1.70 61.80 5.1 2.3 5.1 2.3
25 31 69 1.90 55.64 5.1 2.4 5.1 2.4
28 35 61 2.15 48.69 5.1 2.4 5.1 2.4
31 39 55 2.40 43.83 5.2 2.5 5.2 2.5
37 45 47 2.80 37.52 5.2 2.5 5.2 2.5
41 50 42 3.10 33.78 5.2 2.6 5.2 2.6
43 53 40 1.35 31.79 5.2 2.6 5.2 2.6
F 47
52
58
64
37
33
3.60
4.00
29.32
26.39
5.2
5.2
2.5
2.6
5.2
5.2
2.5
2.6
56 69 31 2.75 24.76 5.2 2.6 5.2 2.6 FH022-14P-63-04F 11 314
63 78 27 4.80 21.89 5.2 2.6 5.2 2.6
69 85 25 3.40 20.08 5.2 2.6 5.2 2.6
70 86 25 5.30 19.70 5.2 2.6 5.2 2.6
84 103 21 6.35 16.48 5.2 2.6 5.2 2.6
87 107 20 4.30 15.82 5.2 2.7 5.2 2.7
93 115 18 7.05 14.84 5.1 2.7 5.1 2.7
113 139 15 5.55 12.19 4.7 2.7 4.7 2.7
114 141 15 8.65 12.09 4.7 2.7 4.7 2.7
127 156 14 9.60 10.89 4.6 2.7 4.6 2.7
145 179 12 7.10 9.52 4.3 2.7 4.3 2.7
194 239 9 9.50 7.11 3.9 2.7 3.9 2.7
258 318 7 12.65 5.35 3.6 2.7 3.6 2.7
351 433 5 14.75 3.93 3.2 2.7 3.2 2.7

Legend see page 211

218 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.25 kW IE3
50 Hz 60 Hz at 50 Hz

0.25 kW 0.30 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.09 0.12 22621 0.80 10164.86 ** ** ** **
0.11 0.14 18955 0.95 8582.99 74 114.4 74.0 114.4
0.12 0.15 17191 1.05 7824.26 81.3 115.9 81.3 115.9
0.14 0.17 15316 1.20 7024.85 87.8 117.4 87.8 117.4
0.16 0.20 12724 1.45 5911.67 94.9 119.6 94.9 119.6
FH155-14P-80-06D 688 346
0.18 0.22 11549 1.60 5407.29 97.5 120.5 97.5 120.5
0.20 0.25 10227 1.80 4838.19 100.1 121.6 100.1 121.6
0.23 0.29 8481 2.15 4085.5 103 123.0 103.0 123.0
0.24 0.30 8102 2.25 3923.28 103.5 123.4 103.5 123.4
0.29 0.35 6745 2.70 3343.64 105.2 124.5 105.2 124.5
0.10 0.12 21535 0.85 14018.89 ** ** ** **
0.11
0.12
0.14
0.15
18980
16787
0.95
1.10
12419.47
11069.46
73.9
82.8
114.4
116.2
73.9
82.8
114.4
116.2
F
0.14 0.17 15337 1.20 10164.86 87.7 117.4 87.7 117.4
0.16 0.20 12784 1.45 8582.99 94.7 119.5 94.7 119.5
FH155-14P-71-04E 686 346
0.18 0.22 11564 1.60 7824.26 97.5 120.5 97.5 120.5
0.20 0.24 10303 1.75 7024.85 100.0 121.5 100.0 121.5
0.23 0.29 8492 2.15 5911.67 103.0 123.0 103.0 123.0
0.26 0.31 7688 2.35 5407.29 104.1 123.7 104.1 123.7
0.29 0.35 6754 2.70 4838.19 105.2 124.5 105.2 124.5
0.41 0.51 4858 2.70 2307.03 86.9 92.8 86.9 92.8 FH124-14P-80-06D 423 340
0.42 0.52 5018 1.60 2276.77 56.1 63.6 56.1 63.6
0.48 0.60 4302 1.90 1976.36 57.7 64.4 57.7 64.4
0.54 0.67 3787 2.15 1757.78 58.7 65.0 58.7 65.0
0.56 0.69 3671 2.20 1707.58 58.9 65.1 58.9 65.1 FH104-14P-80-06D 283 336
0.63 0.78 3240 2.50 1525.85 59.6 65.6 59.6 65.6
0.65 0.80 3117 2.60 1474.19 59.8 65.7 59.8 65.7
0.72 0.90 2747 2.95 1318.33 60.3 66.1 60.3 66.1
0.61 0.75 3360 2.40 2276.77 59.4 65.4 59.4 65.4
FH104-14P-71-04E 281 336
0.70 0.86 2868 2.80 1976.36 60.1 66.0 60.1 66.0
0.37 0.45 5945 0.80 2609.75 ** ** ** **
0.38 0.47 5750 0.80 2524.38 ** ** ** **
0.45 0.56 4831 0.95 2134.14 25.6 38.6 25.6 38.6
0.48 0.59 4503 1.00 1993.28 27.9 39.0 27.9 39.0
0.57 0.70 3776 1.20 1685.14 32.0 40.0 32.0 40.0
0.62 0.77 3442 1.35 1545.54 33.4 40.4 33.4 40.4
FH094-14P-80-06D 178 332
0.73 0.91 2880 1.60 1306.62 35.5 41.2 35.5 41.2
0.75 0.94 2782 1.65 1264.97 35.8 41.3 35.8 41.3
0.89 1.1 2323 1.95 1069.42 37.1 41.9 37.1 41.9
0.98 1.2 2098 2.15 973.69 37.6 42.2 37.6 42.2
1.2 1.4 1741 2.60 823.17 38.4 42.7 38.4 42.7
1.3 1.6 1533 2.95 735.68 38.7 43.0 38.7 43.0
0.45 0.55 4836 0.95 3086.96 25.6 38.6 25.6 38.6
0.53 0.65 4055 1.15 2609.75 30.6 39.6 30.6 39.6
0.55 0.67 3922 1.15 2524.38 31.2 39.8 31.2 39.8
0.65 0.80 3282 1.40 2134.14 34.1 40.7 34.1 40.7
0.69 0.85 3053 1.50 1993.28 34.9 41.0 34.9 41.0 FH094-14P-71-04E 176 332
0.82 1.0 2549 1.80 1685.14 36.5 41.6 36.5 41.6
0.89 1.1 2324 1.95 1545.54 37.1 41.9 37.1 41.9
1.1 1.3 1932 2.35 1306.62 38.0 42.4 38.0 42.4
1.3 1.6 1542 2.95 1069.42 38.7 43.0 38.7 43.0

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 219

 PN = 0.25 kW IE3
50 Hz 60 Hz at 50 Hz

0.25 kW 0.30 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.56 0.69 3899 0.80 1711.85 ** ** ** **
0.61 0.75 3573 0.85 1571.96 ** ** ** **
0.63 0.78 3448 0.90 1520.15 14.7 24.1 14.7 7.2
0.72 0.89 2993 1.05 1327.33 19.4 34.2 19.4 7.9
0.77 0.95 2799 1.10 1244.18 20.9 37.5 20.9 8.2
0.79 0.98 2717 1.15 1209.99 21.5 38.8 21.5 8.3
0.88 1.1 2429 1.25 1086.37 23.3 41.3 23.3 8.8
FH084-14P-80-06D 124 328
1.0 1.2 2124 1.45 957.69 24.9 41.7 24.9 9.2
1.1 1.4 1839 1.65 836.22 26.1 42.2 26.1 9.7
1.3 1.6 1632 1.85 748.21 26.9 42.5 26.9 10.0
1.5 1.9 1356 2.25 631.81 27.7 42.9 27.7 10.4
F 1.6
1.8
2.0
2.3
1296
1084
2.35
2.80
606.72
517.08
27.8
28.3
43.0
43.3
27.8
28.3
10.5
10.8
1.9 2.3 1063 2.85 507.90 28.4 43.4 28.4 10.9
0.56 0.68 3914 0.80 2482.91 ** ** ** **
0.64 0.78 3403 0.90 2167.97 15.3 25.4 15.3 7.3
0.70 0.87 3065 1.00 1960.53 18.8 32.9 18.8 7.8
0.72 0.89 3003 1.00 1920.62 19.3 34.0 19.3 7.9
0.81 0.99 2660 1.15 1711.85 21.9 39.7 21.9 8.4
0.88 1.1 2433 1.25 1571.96 23.3 41.2 23.3 8.7
0.91 1.1 2348 1.30 1520.15 23.8 41.4 23.8 8.9
1.0 1.3 2033 1.50 1327.33 25.3 41.9 25.3 9.4 FH084-14P-71-04E 121 328
1.1 1.4 1898 1.60 1244.18 25.9 42.1 25.9 9.6
1.3 1.6 1640 1.85 1086.37 26.8 42.5 26.8 10.0
1.4 1.8 1431 2.10 957.69 27.5 42.8 27.5 10.3
1.5 1.9 1357 2.25 914.22 27.7 42.9 27.7 10.4
1.7 2.0 1231 2.45 836.22 28.0 43.1 28.0 10.6
1.8 2.3 1086 2.80 748.21 28.3 43.3 28.3 10.8
1.9 2.3 1046 2.90 723.59 28.4 43.4 28.4 10.9
2.5 3.1 963 1.60 385.37 18.6 17.0 18.6 5.8
3.1 3.9 764 2.00 305.42 19.3 17.4 19.3 6.2 FH073-14P-80-06D 63 324
4.0 5.0 593 2.55 237.15 19.8 17.8 19.8 6.5
3.6 4.4 667 2.25 385.37 19.6 17.6 19.6 6.4
FH073-14P-71-04E 61 324
4.5 5.6 528 2.85 305.42 19.9 17.9 19.9 6.7
2.3 2.9 1032 0.80 412.64 ** ** ** **
2.5 3.1 946 0.90 378.37 6.8 10.5 6.8 2.2
2.8 3.5 844 1.00 337.44 8.3 12.5 8.3 2.6
3.1 3.8 774 1.10 309.42 9.1 12.7 9.1 2.8
3.6 4.5 666 1.25 266.44 10.1 13.1 10.1 3.1
3.9 4.9 611 1.35 244.32 10.5 13.2 10.5 3.3
FH063-14P-80-06D 40 322
4.6 5.7 516 1.60 206.59 11.1 13.6 11.1 3.6
5.0 6.3 474 1.75 189.44 11.3 13.7 11.3 3.7
5.6 7.0 423 1.95 169.09 11.6 13.9 11.6 3.9
6.2 7.6 388 2.15 155.05 11.7 14.0 11.7 4.0
7.3 9.1 325 2.55 130.15 11.9 14.2 11.9 4.2
8.0 9.9 298 2.75 119.35 12.0 14.3 12.0 4.3
3.3 4.1 714 1.15 412.64 9.6 12.9 9.6 3.0
3.6 4.5 655 1.30 378.37 10.1 13.1 10.1 3.2
4.1 5.0 584 1.45 337.44 10.7 13.4 10.7 3.4
4.5 5.5 535 1.55 309.42 11.0 13.5 11.0 3.5
5.2 6.4 461 1.80 266.44 11.4 13.8 11.4 3.8 FH063-14P-71-04E 38 322
5.6 7.0 423 1.95 244.32 11.6 13.9 11.6 3.9
6.7 8.2 357 2.30 206.59 11.8 14.1 11.8 4.1
7.3 9.0 328 2.55 189.44 11.9 14.2 11.9 4.2
8.2 10 293 2.85 169.09 12.0 14.3 12.0 4.4

Legend see page 211 ** ... on request

220 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.25 kW IE3
50 Hz 60 Hz at 50 Hz

0.25 kW 0.30 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
3.1 3.9 770 0.80 308.00 ** ** ** **
3.4 4.2 704 0.85 281.41 ** ** ** **
3.9 4.9 607 1.00 242.67 6.0 10.1 6.0 3.4
4.3 5.3 554 1.10 221.71 6.8 10.3 6.8 3.6
5.1 6.3 468 1.30 187.00 7.7 10.6 7.7 3.9
5.6 6.9 427 1.40 170.85 8.1 10.7 8.1 4.0
6.5 8.1 365 1.65 146.1 8.6 10.9 8.6 4.2 FH053-14P-80-06D 24 320
7.2 8.9 334 1.80 133.49 8.8 11.0 8.8 4.3
8.8 11 273 2.25 109.08 9.1 11.2 9.1 4.5
9.6 12 249 2.40 99.66 9.2 11.2 9.2 4.5
10 13 235 2.60 94.11 9.3 11.3 9.3 4.6
11
12
14
14
215
205
2.80
2.95
85.99
82.13
9.4
9.4
11.3
11.4
9.4
9.4
4.6
4.7
F
3.1 3.8 771 0.80 445.56 ** ** ** **
3.6 4.5 657 0.95 379.87 5.1 8.2 5.1 3.3
4.0 4.9 600 1.00 347.07 6.1 10.1 6.1 3.4
4.5 5.5 533 1.15 308.00 7.0 10.4 7.0 3.7
4.9 6.0 487 1.25 281.41 7.5 10.5 7.5 3.8
5.7 7.0 420 1.45 242.67 8.2 10.7 8.2 4.0 FH053-14P-71-04E 22 320
6.2 7.7 384 1.60 221.71 8.4 10.8 8.4 4.1
7.4 9.1 324 1.90 187.00 8.8 11.0 8.8 4.3
8.1 10 296 2.05 170.85 9.0 11.1 9.0 4.4
9.4 12 253 2.40 146.10 9.2 11.2 9.2 4.5
10 13 231 2.60 133.49 9.3 11.3 9.3 4.6
11 14 218 1.70 87.38 9.3 11.3 9.3 4.6
12 15 200 1.70 79.84 9.4 11.4 9.4 4.7
13 17 179 2.85 71.46 9.5 11.5 9.5 4.8
FH052-14P-80-06D 24 320
15 18 163 2.80 65.29 9.5 11.5 9.5 4.8
20 25 120 1.70 48.15 9.6 11.5 9.6 4.8
24 30 98 2.85 39.38 9.7 11.6 9.7 4.9
16 19 151 2.50 87.38 9.6 11.5 9.6 4.8
17 21 138 2.50 79.84 9.6 11.6 9.6 4.9 FH052-14P-71-04E 22 320
29 35 83 2.45 48.15 9.7 11.6 9.7 4.9
4.5 5.6 526 0.80 210.48 ** ** ** **
5.0 6.2 480 0.85 192.00 ** ** ** **
5.9 7.3 405 1.00 162.19 3.7 6.0 3.7 2.5
6.5 8.0 370 1.10 147.96 4.4 7.5 4.4 2.6
7.5 9.4 317 1.30 126.72 5.2 8.4 5.2 2.8
8.3 10 289 1.40 115.6 5.6 8.5 5.6 2.9 FH043-14P-80-06D 18 318
10 13 237 1.70 94.61 6.1 8.7 6.1 3.1
11 14 216 1.90 86.31 6.3 8.7 6.3 3.1
12 15 204 2.00 81.63 6.4 8.8 6.4 3.2
13 16 186 2.15 74.46 6.5 8.8 6.5 3.2
15 18 162 2.50 64.98 6.6 8.9 6.6 3.3
4.6 5.7 520 0.80 300.55 ** ** ** **
5.2 6.4 462 0.90 267.14 1.7 1.8 1.7 1.8
5.7 7.0 422 0.95 243.69 3.3 5.1 3.3 2.4
6.6 8.1 364 1.10 210.48 4.5 7.7 4.5 2.6
7.2 8.9 332 1.25 192.00 5.0 8.3 5.0 2.7
8.5 10 281 1.45 162.19 5.7 8.5 5.7 2.9 FH043-14P-71-04E 16 318
9.3 11 256 1.60 147.96 5.9 8.6 5.9 3.0
11 13 219 1.85 126.72 6.2 8.7 6.2 3.1
12 15 200 2.05 115.60 6.4 8.8 6.4 3.2
15 18 164 2.45 94.61 6.6 8.9 6.6 3.3
16 20 149 2.70 86.31 6.7 9.0 6.7 3.4
13 16 189 1.70 75.79 6.5 8.8 6.5 3.2
14 17 173 1.70 69.14 6.6 8.9 6.6 3.3
15 19 155 2.60 61.98 6.6 8.9 6.6 3.3
FH042-14P-80-06D 18 318
17 21 141 2.85 56.54 6.7 9.0 6.7 3.4
23 29 103 1.70 41.20 6.9 9.0 6.9 3.4
28 35 84 2.85 33.69 6.9 9.1 6.9 3.5

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 221

 PN = 0.25 kW IE3
50 Hz 60 Hz at 50 Hz

0.25 kW 0.30 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
18 22 131 2.50 75.79 6.8 9.0 6.8 3.4
20 25 120 2.45 69.14 6.8 9.1 6.8 3.5 FH042-14P-71-04E 16 318
33 41 71 2.50 41.2 7.0 9.1 7.0 3.5
14 17 175 1.30 70.17 4.1 2.6 4.1 2.6
15 19 159 1.40 63.63 4.3 2.9 4.3 2.9
17 21 143 1.55 57.07 4.5 2.8 4.5 2.8
18 23 129 1.75 51.75 4.6 3.1 4.6 3.1
21 26 113 1.95 45.35 4.7 2.9 4.7 2.9
FH032-14P-80-06D 17 316
23 29 103 2.15 41.12 4.8 3.2 4.8 3.2
27 34 88 2.55 35.03 4.9 3.1 4.9 3.1
30 37 79 2.80 31.76 5.0 3.3 5.0 3.3
F 35
42
43
53
69
56
1.75
2.65
27.67
22.50
5.0
5.1
3.3
3.4
5.0
5.1
3.3
3.4
20 24 121 1.85 70.17 4.7 2.9 4.7 2.9
22 27 110 2.00 63.63 4.8 3.2 4.8 3.2
24 30 99 2.25 57.07 4.8 3.0 4.8 3.0
FH032-14P-71-04E 14 316
27 33 90 2.50 51.75 4.9 3.3 4.9 3.3
30 37 78 2.85 45.35 5.0 3.2 5.0 3.2
50 61 48 2.50 27.67 5.1 3.4 5.1 3.4
14 17 172 0.80 68.62 ** ** ** **
15 19 155 0.85 61.80 ** ** ** **
17 21 139 0.95 55.64 4.6 2.1 4.6 2.1
20 24 122 1.10 48.69 4.8 2 4.8 2
22 27 110 1.20 43.83 4.9 2.3 4.9 2.3
25 32 94 1.40 37.52 5 2.2 5 2.2
28 35 84 1.55 33.78 5 2.4 5 2.4
33 40 73 1.80 29.32 5.1 2.3 5.1 2.3 FH022-14P-80-06D 14 314
36 45 66 2.00 26.39 5.1 2.5 5.1 2.5
39 48 62 1.40 24.76 5.1 2.5 5.1 2.5
44 54 55 2.40 21.89 5.2 2.4 5.2 2.4
48 59 50 1.70 20.08 5.2 2.5 5.2 2.5
51 63 47 2.80 18.88 5.2 2.5 5.2 2.5
60 75 40 2.15 15.82 5.2 2.6 5.2 2.6
78 97 30 2.80 12.19 5.2 2.6 5.2 2.6
14 17 169 0.80 97.85 ** ** ** **
16 19 152 0.90 88.09 4.5 2.1 4.5 2.1
18 22 132 1.00 76.22 4.7 2.0 4.7 2.0
20 25 119 1.10 68.62 4.8 2.2 4.8 2.2
22 28 107 1.25 61.80 4.9 2.1 4.9 2.1
25 31 96 1.40 55.64 5.0 2.3 5.0 2.3
28 35 84 1.55 48.69 5.0 2.2 5.0 2.2
31 39 76 1.75 43.83 5.1 2.4 5.1 2.4
37 45 65 2.05 37.52 5.1 2.4 5.1 2.4
41 50 58 2.25 33.78 5.2 2.5 5.2 2.5
43 53 55 1.00 31.79 5.2 2.5 5.2 2.5
47 58 51 2.60 29.32 5.2 2.4 5.2 2.4
52 64 46 2.85 26.39 5.2 2.5 5.2 2.5
56 69 43 2.00 24.76 5.2 2.6 5.2 2.6 FH022-14P-71-04E 12 314
63 78 38 3.45 21.89 5.2 2.5 5.2 2.5
69 85 35 2.45 20.08 5.2 2.6 5.2 2.6
70 86 34 3.85 19.70 5.2 2.6 5.2 2.6
84 103 29 4.60 16.48 5.2 2.6 5.2 2.6
87 107 27 3.10 15.82 5.2 2.6 5.2 2.6
93 115 26 5.10 14.84 5.1 2.6 5.1 2.6
113 139 21 4.00 12.19 4.8 2.7 4.8 2.7
114 141 21 6.25 12.09 4.8 2.6 4.8 2.6
127 156 19 6.95 10.89 4.6 2.7 4.6 2.7
145 179 16 5.15 9.52 4.4 2.7 4.4 2.7
194 239 12 6.85 7.11 4.0 2.7 4.0 2.7
258 318 9 9.10 5.35 3.6 2.7 3.6 2.7
351 433 7 10.60 3.93 3.2 2.7 3.2 2.7

Legend see page 211 ** ... on request

222 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.37 kW IE3
50 Hz 60 Hz at 50 Hz

0.37 kW 0.44 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.13 0.16 23888 0.80 7024.85 ** ** ** **
0.16 0.19 19948 0.95 5911.67 69.2 113.6 69.2 113.6
0.17 0.21 18200 1.00 5407.29 77.3 115.1 77.3 115.1
0.19 0.24 16159 1.15 4838.19 85.0 116.7 85.0 116.7
0.23 0.28 13506 1.35 4085.5 92.9 118.9 92.9 118.9
FH155-14P-80-06E 690 346
0.24 0.29 12936 1.40 3923.28 94.4 119.4 94.4 119.4
0.28 0.34 10856 1.70 3343.64 98.9 121.1 98.9 121.1
0.34 0.42 8623 2.10 2711.35 102.8 122.9 102.8 122.9
0.35 0.43 8443 2.15 2661.75 103.0 123.1 103.0 123.1
0.41 0.50 7033 2.60 2269.72 104.9 124.2 104.9 124.2
0.14 0.17 22919 0.80 10164.86 ** ** ** **
0.16
0.18
0.20
0.22
19205
17417
0.95
1.05
8582.99
7824.26
72.9
80.5
114.2
115.7
72.9
80.5
114.2
115.7
F
0.20 0.24 15518 1.20 7024.85 87.1 117.3 87.1 117.3
0.24 0.29 12925 1.40 5911.67 94.4 119.4 94.4 119.4 FH155-14P-71-04F 687 346
0.26 0.32 11731 1.55 5407.29 97.1 120.4 97.1 120.4
0.29 0.35 10389 1.75 4838.19 99.8 121.5 99.8 121.5
0.34 0.42 8615 2.10 4085.5 102.8 122.9 102.8 122.9
0.42 0.51 6852 2.65 3343.64 105.1 124.4 105.1 124.4
0.40 0.49 7553 2.40 2318.3 104.3 123.8 104.3 123.8
FH154-14P-80-06E 677 344
0.46 0.57 6384 2.85 1996.74 105.6 124.8 105.6 124.8
0.40 0.49 7738 1.70 2307.03 83.1 90.0 83.1 90.0
0.46 0.57 6677 1.95 2011.51 84.8 91.1 84.8 91.1
0.52 0.64 5839 2.25 1781.14 85.8 91.9 85.8 91.9
FH124-14P-80-06E 425 340
0.53 0.66 5669 2.30 1732.67 86.1 92.0 86.1 92.0
0.60 0.73 5018 2.60 1552.98 86.8 92.7 86.8 92.7
0.62 0.76 4796 2.75 1493.78 87.0 92.9 87.0 92.9
0.60 0.74 4932 2.65 2307.03 86.9 92.7 86.9 92.7 FH124-14P-71-04F 422 340
0.41 0.50 7843 1.05 2276.77 46.5 60.4 46.5 60.4
0.47 0.58 6767 1.20 1976.36 50.9 61.6 50.9 61.6
0.53 0.65 5981 1.35 1757.78 53.5 62.5 53.5 62.5
0.54 0.67 5799 1.40 1707.58 54.0 62.7 54.0 62.7
0.61 0.75 5139 1.60 1525.85 55.8 63.4 55.8 63.4
0.63 0.77 4955 1.65 1474.19 56.3 63.7 56.3 63.7
0.70 0.86 4394 1.85 1318.33 57.5 64.3 57.5 64.3 FH104-14P-80-06E 285 336
0.72 0.89 4257 1.90 1279.68 57.8 64.4 57.8 64.4
0.80 0.99 3817 2.10 1156.94 58.6 64.9 58.6 64.9
0.84 1.0 3625 2.25 1105.64 59.0 65.1 59.0 65.1
0.92 1.1 3258 2.50 1004.29 59.6 65.5 59.6 65.5
1.0 1.3 2861 2.80 892.89 60.1 66.0 60.1 66.0
1.1 1.3 2769 2.90 867.71 60.2 66.1 60.2 66.1
0.61 0.75 5084 1.60 2276.77 56.0 63.5 56.0 63.5
0.71 0.87 4368 1.85 1976.36 57.6 64.3 57.6 64.3
0.79 0.97 3845 2.10 1757.78 58.6 64.9 58.6 64.9
0.82 1.0 3728 2.15 1707.58 58.8 65.0 58.8 65.0 FH104-14P-71-04F 282 336
0.91 1.1 3290 2.45 1525.85 59.5 65.5 59.5 65.5
0.95 1.2 3165 2.55 1474.19 59.7 65.6 59.7 65.6
1.1 1.3 2789 2.90 1318.33 60.2 66.1 60.2 66.1
0.55 0.68 5865 0.80 1685.14 ** ** ** **
0.60 0.74 5368 0.85 1545.54 ** ** ** **
0.71 0.87 4511 1.00 1306.62 27.9 39.0 27.9 39.0
0.73 0.90 4358 1.05 1264.97 28.8 39.2 28.8 39.2
0.86 1.1 3654 1.25 1069.42 32.5 40.2 32.5 40.2
0.95 1.2 3306 1.40 973.69 34.0 40.6 34.0 40.6 FH094-14P-80-06E 180 332
1.1 1.4 2767 1.65 823.17 35.9 41.3 35.9 41.3
1.3 1.5 2452 1.85 735.68 36.8 41.8 36.8 41.8
1.5 1.8 2039 2.25 621.95 37.8 42.3 37.8 42.3
1.8 2.2 1631 2.80 509.01 38.6 42.8 38.6 42.8
1.9 2.3 1558 2.90 488.23 38.7 42.9 38.7 42.9

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 223

 PN = 0.37 kW IE3
50 Hz 60 Hz at 50 Hz

0.37 kW 0.44 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.55 0.68 5826 0.80 2524.38 ** ** ** **
0.65 0.80 4895 0.95 2134.14 25.1 38.5 25.1 38.5
0.70 0.86 4563 1.00 1993.28 27.5 39.0 27.5 39.0
0.83 1.0 3826 1.20 1685.14 31.7 39.9 31.7 39.9
0.90 1.1 3494 1.30 1545.54 33.2 40.4 33.2 40.4
FH094-14P-71-04F 177 332
1.1 1.3 2924 1.55 1306.62 35.4 41.1 35.4 41.1
1.3 1.6 2354 1.95 1069.42 37.0 41.9 37.0 41.9
1.4 1.8 2125 2.15 973.69 37.6 42.2 37.6 42.2
1.7 2.1 1767 2.55 823.17 38.3 42.7 38.3 42.7
1.9 2.3 1557 2.90 735.68 38.7 42.9 38.7 42.9
0.85 1.0 3781 0.80 1086.37 ** ** ** **
F 0.97
1.0
1.2
1.2
3313
3162
0.95
0.95
957.69
914.22
16.4
17.9
27.7
30.9
16.4
17.9
7.4
7.6
1.1 1.4 2881 1.05 836.22 20.3 36.2 20.3 8.1
1.2 1.5 2562 1.20 748.21 22.5 41.1 22.5 8.6
1.3 1.6 2472 1.25 723.59 23.1 41.2 23.1 8.7
1.5 1.8 2145 1.40 631.81 24.8 41.7 24.8 9.2
FH084-14P-80-06E 126 328
1.6 1.9 2003 1.50 592.20 25.4 41.9 25.4 9.4
1.8 2.2 1731 1.75 517.08 26.5 42.3 26.5 9.8
1.9 2.4 1597 1.90 480.21 27.0 42.5 27.0 10.0
2.2 2.7 1378 2.20 419.30 27.6 42.9 27.6 10.4
2.3 2.8 1315 2.30 401.99 27.8 43.0 27.8 10.5
2.6 3.2 1129 2.70 351.00 28.2 43.3 28.2 10.8
2.8 3.5 1040 2.90 325.80 28.4 43.4 28.4 10.9
0.81 1.0 3951 0.80 1711.85 ** ** ** **
0.89 1.1 3620 0.85 1571.96 ** ** ** **
0.92 1.1 3494 0.90 1520.15 14.1 22.8 14.1 7.1
1.1 1.3 3038 1.00 1327.33 19.0 33.3 19.0 7.8
1.2 1.4 2758 1.10 1209.99 21.2 38.1 21.2 8.2
1.3 1.6 2461 1.25 1086.37 23.1 41.2 23.1 8.7
FH084-14P-71-04F 122 328
1.5 1.8 2156 1.40 957.69 24.8 41.7 24.8 9.2
1.7 2.0 1864 1.65 836.22 26.0 42.1 26.0 9.6
1.9 2.3 1654 1.85 748.21 26.8 42.5 26.8 10.0
2.2 2.7 1376 2.20 631.81 27.6 42.9 27.6 10.4
2.4 2.9 1282 2.35 592.20 27.9 43.0 27.9 10.5
2.7 3.3 1101 2.75 517.08 28.3 43.3 28.3 10.8
2.6 3.2 1370 2.20 358.52 27.6 42.9 27.6 10.4
FH083-14P-80-06E 113 326
3.3 4.0 1084 2.80 283.76 28.3 43.3 28.3 10.8
2.4 3.0 1472 1.05 385.37 15.8 16.0 15.8 4.7
3.0 3.7 1167 1.30 305.42 17.7 16.6 17.7 5.4
3.9 4.8 906 1.70 237.15 18.8 17.2 18.8 5.9 FH073-14P-80-06E 65 324
4.8 5.9 743 2.05 194.58 19.4 17.5 19.4 6.2
6.1 7.6 576 2.65 150.69 19.8 17.8 19.8 6.6
3.6 4.4 976 1.55 385.37 18.5 17.0 18.5 5.8
4.6 5.6 774 1.95 305.42 19.3 17.4 19.3 6.2 FH073-14P-71-04F 62 324
5.9 7.2 601 2.50 237.15 19.8 17.8 19.8 6.5
3.5 4.3 1018 0.85 266.44 ** ** ** **
3.8 4.7 933 0.90 244.32 7.0 10.9 7.0 2.2
4.5 5.5 789 1.05 206.59 8.9 12.7 8.9 2.7
4.9 6.0 724 1.15 189.44 9.6 12.9 9.6 2.9
5.5 6.7 646 1.30 169.09 10.2 13.2 10.2 3.2
6.0 7.4 592 1.40 155.05 10.6 13.3 10.6 3.4
FH063-14P-80-06E 42 322
7.1 8.8 497 1.65 130.15 11.2 13.6 11.2 3.7
7.8 9.6 456 1.80 119.35 11.4 13.8 11.4 3.8
9.4 12 376 2.20 98.34 11.8 14.0 11.8 4.1
10 13 344 2.40 90.17 11.9 14.1 11.9 4.2
11 14 307 2.70 80.48 12.0 14.3 12.0 4.3
13 15 282 2.95 73.80 12.1 14.3 12.1 4.4

Legend see page 211 ** ... on request

224 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.37 kW IE3
50 Hz 60 Hz at 50 Hz

0.37 kW 0.44 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
3.4 4.1 1045 0.80 412.64 ** ** ** **
3.7 4.5 958 0.90 378.37 6.5 9.9 6.5 2.2
4.1 5.1 855 1.00 337.44 8.1 12.5 8.1 2.5
4.5 5.5 784 1.05 309.42 9.0 12.7 9.0 2.7
5.2 6.4 675 1.25 266.44 10.0 13.1 10.0 3.1
5.7 7.0 619 1.35 244.32 10.4 13.2 10.4 3.3
FH063-14P-71-04F 39 322
6.8 8.3 523 1.60 206.59 11.0 13.6 11.0 3.6
7.4 9.0 480 1.75 189.44 11.3 13.7 11.3 3.7
8.3 10 428 1.95 169.09 11.5 13.9 11.5 3.9
9.0 11 393 2.10 155.05 11.7 14.0 11.7 4.0
11 13 330 2.50 130.15 11.9 14.2 11.9 4.2
12
4.9
14
6.1
302
714
2.75
0.85
119.35
187.00
12.0
**
14.3
**
12.0
**
4.3
**
F
5.4 6.7 653 0.95 170.85 5.2 8.4 5.2 3.3
6.3 7.8 558 1.10 146.10 6.7 10.3 6.7 3.6
6.9 8.5 510 1.20 133.49 7.3 10.4 7.3 3.7
8.5 10 417 1.45 109.08 8.2 10.7 8.2 4.0
9.3 11 381 1.60 99.66 8.5 10.8 8.5 4.1 FH053-14P-80-06E 26 320
9.8 12 360 1.70 94.11 8.6 10.9 8.6 4.2
11 13 328 1.85 85.99 8.8 11.0 8.8 4.3
12 15 287 2.10 75.04 9.0 11.1 9.0 4.4
15 19 230 2.65 60.26 9.3 11.3 9.3 4.6
17 21 210 2.85 55.06 9.4 11.4 9.4 4.7
4.5 5.6 780 0.80 308.00 ** ** ** **
5.0 6.1 713 0.85 281.41 ** ** ** **
5.7 7.0 615 1.00 242.67 5.9 9.9 5.9 3.4
6.3 7.7 562 1.10 221.71 6.7 10.3 6.7 3.6
7.5 9.1 474 1.30 187.00 7.7 10.6 7.7 3.9
8.2 10 433 1.40 170.85 8.1 10.7 8.1 4.0 FH053-14P-71-04F 23 320
9.5 12 370 1.65 146.10 8.5 10.9 8.5 4.2
10 13 338 1.80 133.49 8.8 11.0 8.8 4.3
13 16 276 2.20 109.08 9.1 11.2 9.1 4.5
14 17 252 2.40 99.66 9.2 11.2 9.2 4.5
17 21 208 2.90 82.13 9.4 11.4 9.4 4.7
11 13 334 1.15 87.38 8.8 11.0 8.8 4.3
12 14 305 1.15 79.84 8.9 11.1 8.9 4.4
13 16 273 1.85 71.46 9.1 11.2 9.1 4.5
14 17 249 1.85 65.29 9.2 11.2 9.2 4.5 FH052-14P-80-06E 26 320
16 20 216 2.80 56.42 9.4 11.3 9.4 4.6
19 24 184 1.15 48.15 9.5 11.2 9.5 4.5
23 29 150 1.85 39.38 9.6 11.3 9.6 4.6
16 20 221 1.70 87.38 9.3 11.3 9.3 4.6
17 21 202 1.70 79.84 9.4 11.4 9.4 4.7
20 24 181 2.80 71.46 9.5 11.4 9.5 4.7
FH052-14P-71-04F 22 320
21 26 165 2.80 65.29 9.5 11.5 9.5 4.8
29 36 122 1.70 48.15 9.6 11.5 9.6 4.8
35 43 100 2.80 39.38 9.7 11.6 9.7 4.9
7.3 9.0 484 0.85 126.72 ** ** ** **
8.0 9.9 442 0.95 115.60 2.6 3.6 2.6 2.3
9.8 12 361 1.15 94.61 4.6 7.9 4.6 2.6
11 13 330 1.25 86.31 5.1 8.3 5.1 2.7
12 15 284 1.45 74.46 5.6 8.5 5.6 2.9 FH043-14P-80-06E 20 318
13 16 272 1.50 71.24 5.8 8.5 5.8 2.9
14 18 248 1.65 64.98 6.0 8.6 6.0 3.0
18 22 200 2.05 52.27 6.4 8.8 6.4 3.2
19 24 182 2.20 47.68 6.5 8.9 6.5 3.3

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 225

 PN = 0.37 kW IE3
50 Hz 60 Hz at 50 Hz

0.37 kW 0.44 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
6.6 8.1 533 0.80 210.48 ** ** ** **
7.3 8.9 486 0.85 192.00 ** ** ** **
8.6 11 411 1.00 162.19 3.5 5.5 3.5 2.4
9.4 12 375 1.10 147.96 4.3 7.3 4.3 2.6
11 13 321 1.25 126.72 5.2 8.4 5.2 2.8
FH043-14P-71-04F 17 318
12 15 293 1.40 115.60 5.5 8.5 5.5 2.9
15 18 240 1.70 94.61 6.1 8.6 6.1 3.0
16 20 219 1.85 86.31 6.2 8.7 6.2 3.1
20 24 180 2.25 71.24 6.5 8.9 6.5 3.3
21 26 165 2.45 64.98 6.6 8.9 6.6 3.3
12 15 290 1.15 75.79 5.6 8.5 5.6 2.9
F 13
15
16
18
264
237
1.15
1.70
69.14
61.98
5.9
6.1
8.6
8.7
5.9
6.1
3.0
3.1
16 20 216 1.85 56.54 6.3 8.7 6.3 3.1
19 23 187 2.15 48.94 6.5 8.8 6.5 3.2 FH043-14P-80-06E 20 318
21 26 171 2.35 44.64 6.6 8.9 6.6 3.3
22 28 157 1.15 41.20 6.6 8.7 6.6 3.1
24 30 145 2.80 37.95 6.7 9.0 6.7 3.4
27 34 129 1.85 33.69 6.8 8.8 6.8 3.2
18 23 192 1.70 75.79 6.4 8.8 6.4 3.2
20 25 175 1.70 69.14 6.5 8.9 6.5 3.3
23 28 157 2.55 61.98 6.6 8.9 6.6 3.3
FH042-14P-71-04F 17 318
25 30 143 2.80 56.54 6.7 9.0 6.7 3.4
34 42 104 1.70 41.20 6.9 9.0 6.9 3.4
41 51 85 2.80 33.69 6.9 9.1 6.9 3.5
13 16 268 0.85 70.17 ** ** ** **
15 18 243 0.95 63.63 2.8 2.6 2.8 2.6
16 20 218 1.05 57.07 3.4 2.3 3.4 2.3
18 22 198 1.15 51.75 3.8 2.8 3.8 2.8
20 25 173 1.30 45.35 4.1 2.6 4.1 2.6
22 28 157 1.45 41.12 4.3 3.0 4.3 3.0
26 33 134 1.65 35.03 4.6 2.8 4.6 2.8
FH032-14P-80-06E 19 316
29 36 121 1.85 31.76 4.7 3.1 4.7 3.1
33 41 107 2.10 27.97 4.8 3.0 4.8 3.0
36 45 97 2.30 25.36 4.9 3.2 4.9 3.2
41 51 86 1.75 22.50 4.9 3.2 4.9 3.2
44 54 81 2.75 21.14 4.9 3.2 4.9 3.2
52 64 68 2.20 17.88 5.0 3.3 5.0 3.3
67 83 53 2.85 13.81 5.1 3.4 5.1 3.4
20 24 178 1.25 70.17 4.1 2.6 4.1 2.6
22 27 161 1.40 63.63 4.3 2.9 4.3 2.9
24 30 145 1.55 57.07 4.5 2.8 4.5 2.8
27 33 131 1.70 51.75 4.6 3.1 4.6 3.1
31 38 115 1.95 45.35 4.7 2.9 4.7 2.9
FH032-14P-71-04F 15 316
34 42 104 2.15 41.12 4.8 3.2 4.8 3.2
40 49 89 2.50 35.03 4.9 3.1 4.9 3.1
44 54 80 2.75 31.76 4.9 3.3 4.9 3.3
50 62 70 1.70 27.67 5.0 3.3 5.0 3.3
62 76 57 2.60 22.50 5.0 3.4 5.0 3.4

Legend see page 211 ** ... on request

226 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.37 kW IE3
50 Hz 60 Hz at 50 Hz

0.37 kW 0.44 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
21 26 167 0.80 43.83 ** ** ** **
25 30 143 0.95 37.52 4.6 1.9 4.6 1.9
27 34 129 1.05 33.78 4.7 2.2 4.7 2.2
32 39 112 1.20 29.32 4.9 2.1 4.9 2.1
35 43 101 1.30 26.39 4.9 2.3 4.9 2.3
37 46 95 0.90 24.76 5.0 2.3 5.0 2.3
42 52 84 1.60 21.89 5.0 2.3 5.0 2.3
46 57 77 1.10 20.08 5.1 2.4 5.1 2.4
47 58 75 1.75 19.70 5.1 2.4 5.1 2.4 FH022-14P-80-06E 16 314
49 60 72 1.85 18.88 5.1 2.3 5.1 2.3
54 67 65 2.05 17.00 5.1 2.5 5.1 2.5
56
58
69
72
63
60
2.10
1.40
16.48
15.82
5.1
5.1
2.4
2.5
5.1
5.1
2.4
2.5
F
62 77 57 2.30 14.84 5.2 2.5 5.2 2.5
76 94 47 1.85 12.19 5.2 2.5 5.2 2.5
77 94 46 2.85 12.09 5.2 2.5 5.2 2.5
97 120 36 2.35 9.52 5.1 2.6 5.1 2.6
23 28 157 0.85 61.80 ** ** ** **
25 31 141 0.95 55.64 4.6 2.1 4.6 2.1
29 35 123 1.10 48.69 4.8 2.0 4.8 2.0
32 39 111 1.20 43.83 4.9 2.3 4.9 2.3
37 46 95 1.40 37.52 5.0 2.2 5.0 2.2
41 51 86 1.55 33.78 5.0 2.4 5.0 2.4
48 58 74 1.80 29.32 5.1 2.3 5.1 2.3
53 65 67 1.95 26.39 5.1 2.5 5.1 2.5
56 69 63 1.35 24.76 5.1 2.5 5.1 2.5
64 78 55 2.35 21.89 5.2 2.4 5.2 2.4
69 85 51 1.70 20.08 5.2 2.5 5.2 2.5
FH022-14P-71-04F 13 314
71 87 50 2.65 19.70 5.2 2.5 5.2 2.5
85 104 42 3.15 16.48 5.2 2.5 5.2 2.5
88 108 40 2.10 15.82 5.2 2.6 5.2 2.6
94 115 38 3.50 14.84 5.2 2.6 5.2 2.6
114 140 31 2.75 12.19 4.8 2.6 4.8 2.6
115 141 31 4.25 12.09 4.8 2.6 4.8 2.6
128 157 28 4.75 10.89 4.6 2.6 4.6 2.6
147 180 24 3.50 9.52 4.4 2.6 4.4 2.6
196 241 18 4.70 7.11 4.0 2.7 4.0 2.7
261 320 14 6.20 5.35 3.6 2.7 3.6 2.7
355 435 10 7.25 3.93 3.2 2.7 3.2 2.7

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 227

 PN = 0.55 kW IE3
50 Hz 60 Hz at 50 Hz

0.55 kW 0.66 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.20 0.24 23938 0.80 4838.19 ** ** ** **
0.23 0.28 20111 0.90 4085.50 68.4 113.5 68.4 113.5
0.24 0.29 19263 0.95 3923.28 72.6 114.2 72.6 114.2
0.28 0.35 16249 1.15 3343.64 84.7 116.7 84.7 116.7
0.29 0.35 15961 1.15 3284.26 85.7 116.9 85.7 116.9 FH155-14P-L80-06F 691 346
0.35 0.43 13008 1.40 2711.35 94.2 119.3 94.2 119.3
0.36 0.43 12737 1.45 2661.75 94.8 119.5 94.8 119.5
0.42 0.51 10722 1.70 2269.72 99.2 121.2 99.2 121.2
0.51 0.63 8490 2.15 1839.52 103.0 123.0 103.0 123.0
0.20 0.24 23131 0.80 7024.85 ** ** ** **
0.24 0.29 19316 0.95 5911.67 72.3 114.1 72.3 114.1
F 0.26
0.29
0.32
0.36
17578
15607
1.05
1.20
5407.29
4838.19
79.9
86.9
115.6
117.2
79.9
86.9
115.6
117.2
0.35 0.42 13044 1.40 4085.5 94.1 119.3 94.1 119.3
0.36 0.44 12494 1.45 3923.28 95.4 119.7 95.4 119.7 FH155-14P-80-04E 689 346
0.42 0.51 10485 1.75 3343.64 99.6 121.4 99.6 121.4
0.43 0.52 10298 1.75 3284.26 100 121.5 100 121.5
0.52 0.63 8306 2.20 2711.35 103.2 123.2 103.2 123.2
0.53 0.65 8133 2.25 2661.75 103.5 123.3 103.5 123.3
0.63 0.76 6775 2.70 2269.72 105.2 124.4 105.2 124.4
0.41 0.50 11361 1.60 2318.30 97.9 120.7 97.9 120.7
0.47 0.58 9664 1.90 1996.74 101.1 122.1 101.1 122.1
0.52 0.63 8826 2.05 1834.90 102.5 122.8 102.5 122.8
0.55 0.67 8256 2.20 1727.10 103.3 123.2 103.3 123.2
0.59 0.72 7595 2.40 1602.16 104.2 123.8 104.2 123.8 FH154-14P-L80-06F 678 344
0.60 0.73 7476 2.45 1580.39 104.4 123.9 104.4 123.9
0.67 0.82 6615 2.75 1415.96 105.4 124.6 105.4 124.6
0.68 0.84 6433 2.80 1379.93 105.6 124.7 105.6 124.7
0.69 0.84 6360 2.85 1366.97 105.7 124.8 105.7 124.8
0.61 0.74 7283 2.50 2318.3 104.6 124 104.6 124.0
FH154-14P-80-04E 676 344
0.71 0.86 6156 2.95 1996.74 105.9 124.9 105.9 124.9
0.41 0.50 11517 1.15 2307.03 74.9 86.4 74.9 86.4
0.47 0.57 9959 1.35 2011.51 78.8 87.9 78.8 87.9
0.53 0.65 8764 1.50 1781.14 81.3 89.1 81.3 89.1
0.55 0.67 8508 1.55 1732.67 81.8 89.3 81.8 89.3
0.61 0.74 7563 1.75 1552.98 83.4 90.2 83.4 90.2
0.63 0.77 7260 1.80 1493.78 83.9 90.5 83.9 90.5
0.71 0.86 6434 2.05 1337.70 85.1 91.3 85.1 91.3 FH124-14P-L80-06F 426 340
0.73 0.89 6252 2.10 1302.43 85.3 91.5 85.3 91.5
0.81 0.99 5569 2.35 1172.32 86.2 92.1 86.2 92.1
0.82 1.0 5461 2.40 1151.94 86.3 92.2 86.3 92.2
0.84 1.0 5307 2.45 1121.89 86.5 92.4 86.5 92.4
0.92 1.1 4775 2.75 1022.15 87.0 92.9 87.0 92.9
0.98 1.2 4485 2.90 966.09 87.3 93.2 87.3 93.2
0.62 0.75 7477 1.75 2307.03 83.6 90.3 83.6 90.3
0.71 0.86 6439 2.05 2011.51 85.1 91.3 85.1 91.3
0.80 0.97 5631 2.35 1781.14 86.1 92.1 86.1 92.1
FH124-14P-80-04E 424 340
0.82 0.99 5466 2.40 1732.67 86.3 92.2 86.3 92.2
0.91 1.1 4838 2.70 1552.98 87.0 92.8 87.0 92.8
0.95 1.2 4625 2.85 1493.78 87.2 93.0 87.2 93.0
0.48 0.58 10009 0.80 1976.36 ** ** ** **
0.54 0.66 8847 0.95 1757.78 41.3 59.3 41.3 59.3
0.55 0.68 8595 0.95 1707.58 42.7 59.6 42.7 59.6
0.62 0.76 7648 1.05 1525.85 47.4 60.7 47.4 60.7
0.64 0.78 7374 1.10 1474.19 48.5 61.0 48.5 61.0
0.72 0.88 6554 1.25 1318.33 51.6 61.9 51.6 61.9
0.74 0.90 6349 1.30 1279.68 52.3 62.1 52.3 62.1
0.82 1.0 5716 1.40 1156.94 54.3 62.8 54.3 62.8 FH104-14P-L80-06F 286 336
0.85 1.0 5440 1.50 1105.64 55.1 63.1 55.1 63.1
0.94 1.2 4911 1.65 1004.29 56.4 63.7 56.4 63.7
1.1 1.3 4331 1.85 892.89 57.7 64.3 57.7 64.3
1.2 1.5 3705 2.20 775.08 58.8 65.0 58.8 65.0
1.3 1.6 3516 2.30 738.55 59.2 65.3 59.2 65.3
1.4 1.7 3155 2.55 669.67 59.7 65.7 59.7 65.7
1.5 1.8 3001 2.70 641.10 59.9 65.8 59.9 65.8

228 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.55 kW IE3
50 Hz 60 Hz at 50 Hz

0.55 kW 0.66 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.62 0.76 7579 1.10 2276.77 47.7 60.7 47.7 60.7
0.72 0.87 6539 1.25 1976.36 51.7 61.9 51.7 61.9
0.81 0.98 5780 1.40 1757.78 54.1 62.7 54.1 62.7
0.83 1.0 5603 1.45 1707.58 54.6 62.9 54.6 62.9
0.93 1.1 4966 1.65 1525.85 56.3 63.6 56.3 63.6
0.96 1.2 4788 1.70 1474.19 56.7 63.8 56.7 63.8 FH104-14P-80-04E 284 336
1.1 1.3 4246 1.90 1318.33 57.8 64.4 57.8 64.4
1.2 1.5 3680 2.20 1156.94 58.9 65.1 58.9 65.1
1.3 1.6 3503 2.30 1105.64 59.2 65.3 59.2 65.3
1.4 1.7 3149 2.55 1004.29 59.7 65.7 59.7 65.7
1.6 1.9 2759 2.90 892.89 60.2 66.1 60.2 66.1
0.88
0.97
1.1
1.2
5405
4901
0.85
0.95
1069.42
973.69
**
25.1
**
38.5
**
25.1
**
38.5
F
1.1 1.4 4118 1.10 823.17 30.2 39.5 30.2 39.5
1.3 1.6 3657 1.25 735.68 32.5 40.2 32.5 40.2
1.5 1.9 3060 1.50 621.95 34.9 40.9 34.9 40.9
FH094-14P-L80-06F 181 332
1.6 1.9 2957 1.55 602.09 35.3 41.1 35.3 41.1
1.9 2.3 2469 1.85 509.01 36.7 41.7 36.7 41.7
2.3 2.8 1965 2.30 412.76 37.9 42.4 37.9 42.4
2.7 3.3 1611 2.80 345.53 38.6 42.9 38.6 42.9
2.9 3.5 1535 2.95 331.24 38.7 43.0 38.7 43.0
0.84 1.0 5679 0.80 1685.14 ** ** ** **
0.92 1.1 5187 0.90 1545.54 22.7 38.1 22.7 38.1
1.1 1.3 4359 1.05 1306.62 28.8 39.2 28.8 39.2
1.3 1.6 3531 1.30 1069.42 33.1 40.3 33.1 40.3
1.5 1.8 3195 1.45 973.69 34.4 40.8 34.4 40.8
1.7 2.1 2673 1.70 823.17 36.2 41.5 36.2 41.5 FH094-14P-80-04E 179 332
1.9 2.3 2370 1.90 735.68 37.0 41.9 37.0 41.9
2.3 2.8 1970 2.30 621.95 37.9 42.4 37.9 42.4
2.4 2.9 1899 2.40 602.09 38.1 42.5 38.1 42.5
2.8 3.4 1573 2.90 509.01 38.7 42.9 38.7 42.9
2.9 3.5 1502 3.00 488.23 38.8 43.0 38.8 43.0
3.3 4.0 1604 2.85 288.50 38.6 42.9 38.6 42.9 FH093-14P-L80-06F 168 330
1.3 1.5 3789 0.80 748.21 ** ** ** **
1.5 1.8 3180 0.95 631.81 17.7 30.5 17.7 7.6
1.6 1.9 3047 1.00 606.72 19.0 33.3 19.0 7.8
1.8 2.2 2576 1.20 517.08 22.5 41.0 22.5 8.5
1.9 2.3 2530 1.20 507.90 22.7 41.1 22.7 8.6
2.0 2.4 2382 1.30 480.21 23.6 41.3 23.6 8.8 FH084-14P-L80-06F 127 328
2.3 2.8 2063 1.50 419.30 25.2 41.8 25.2 9.3
2.4 2.9 1974 1.55 401.99 25.6 42.0 25.6 9.5
2.7 3.3 1706 1.80 351.00 26.6 42.4 26.6 9.9
2.9 3.5 1574 1.95 325.80 27.0 42.6 27.0 10.1
3.3 4.1 1357 2.25 284.47 27.7 42.9 27.7 10.4
1.3 1.6 3654 0.85 1086.37 ** ** ** **
1.5 1.8 3208 0.95 957.69 17.5 30.1 17.5 7.6
1.6 1.9 3056 1.00 914.22 18.9 33.1 18.9 7.8
1.7 2.1 2784 1.10 836.22 21.1 37.9 21.1 8.2
1.9 2.3 2475 1.25 748.21 23.1 41.2 23.1 8.7
2.0 2.4 2389 1.30 723.59 23.6 41.3 23.6 8.8
2.2 2.7 2073 1.45 631.81 25.1 41.8 25.1 9.3
2.3 2.8 1983 1.55 606.72 25.5 41.9 25.5 9.4
FH084-14P-80-04E 125 328
2.4 2.9 1931 1.60 592.20 25.7 42.0 25.7 9.5
2.7 3.3 1672 1.80 517.08 26.7 42.4 26.7 9.9
2.8 3.4 1639 1.85 507.90 26.8 42.5 26.8 10.0
3.0 3.6 1544 1.95 480.21 27.1 42.6 27.1 10.1
3.4 4.1 1328 2.30 419.30 27.8 43.0 27.8 10.5
3.5 4.3 1268 2.40 401.99 27.9 43.0 27.9 10.5
4.0 4.9 1091 2.75 351.00 28.3 43.3 28.3 10.8
4.4 5.3 1002 3.00 325.80 28.5 43.5 28.5 11.0

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 229

 PN = 0.55 kW IE3
50 Hz 60 Hz at 50 Hz

0.55 kW 0.66 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
2.6 3.2 1993 1.55 358.52 25.5 41.9 25.5 9.4
3.3 4.1 1577 1.95 283.76 27.0 42.6 27.0 10.1
3.8 4.7 1377 2.20 247.77 27.6 42.9 27.6 10.4
FH083-14P-L80-06F 114 326
4.3 5.3 1217 2.50 218.97 28.0 43.1 28.0 10.6
5.1 6.2 1029 2.95 185.17 28.4 43.4 28.4 10.9
5.2 6.4 1002 3.00 180.28 28.5 43.5 28.5 11.0
4.0 4.8 1326 2.30 358.52 27.8 43.0 27.8 10.5
FH083-14P-80-04E 112 326
5.0 6.1 1050 2.90 283.76 28.4 43.4 28.4 10.9
3.1 3.8 1698 0.90 305.42 13.9 15.5 13.9 4.3
4.0 4.9 1318 1.15 237.15 16.8 16.3 16.8 5.1
4.9 5.9 1082 1.40 194.58 18.1 16.8 18.1 5.5
F 6.3
8.2
7.7
10
838
637
1.80
2.40
150.69
114.62
19.1
19.7
17.3
17.7
19.1
19.7
6.0
6.5
FH073-14P-L80-06F 66 324

10 12 525 2.90 94.52 19.9 17.9 18.6 6.7

3.7 4.5 1425 1.10 385.37 16.1 16.1 16.1 4.8
4.6 5.6 1130 1.35 305.42 17.9 16.7 17.9 5.4
6.0 7.3 877 1.75 237.15 18.9 17.2 18.9 6.0 FH073-14P-80-04E 64 324
7.3 8.8 720 2.10 194.58 19.4 17.5 19.4 6.3
9.4 11 557 2.70 150.69 19.9 17.9 19.0 6.6
5.0 6.1 1053 0.80 189.44 ** ** ** **
5.6 6.8 940 0.90 169.09 6.9 10.8 6.9 2.3
6.1 7.4 862 1.00 155.05 8.0 12.4 8.0 2.5
7.3 8.9 723 1.15 130.15 9.6 12.9 9.6 3.0
7.9 9.7 663 1.25 119.35 10.1 13.1 10.1 3.1
9.6 12 547 1.55 98.34 10.9 13.5 10.9 3.5
10 13 501 1.65 90.17 11.2 13.6 11.2 3.7 FH063-14P-L80-06F 43 322
12 14 447 1.85 80.48 11.4 13.8 11.4 3.9
13 16 410 2.00 73.80 11.6 13.9 11.6 4.0
14 18 363 2.30 65.26 11.8 14.1 11.8 4.1
16 19 333 2.50 59.84 11.9 14.2 11.9 4.2
17 21 304 2.75 54.63 12.0 14.3 12.0 4.3
19 23 278 2.95 50.10 12.1 14.3 12.1 4.4
5.3 6.5 986 0.85 266.44 ** ** ** **
5.8 7.0 904 0.95 244.32 7.4 11.8 7.4 2.3
6.9 8.3 764 1.10 206.59 9.2 12.8 9.2 2.8
7.5 9.1 701 1.20 189.44 9.8 13.0 9.8 3.0
8.4 10 625 1.35 169.09 10.4 13.2 10.4 3.3
9.2 11 574 1.45 155.05 10.7 13.4 10.7 3.4 FH063-14P-80-04E 41 322
11 13 481 1.75 130.15 11.3 13.7 11.3 3.7
12 14 441 1.90 119.35 11.5 13.8 11.5 3.9
14 17 364 2.30 98.34 11.8 14.1 11.8 4.1
16 19 334 2.50 90.17 11.9 14.2 11.9 4.2
18 21 298 2.80 80.48 12.0 14.3 12.0 4.3
19 23 276 3.00 49.67 12.1 14.4 12.1 4.4 FH062-14P-L80-06F 42 322
7.1 8.7 742 0.85 133.49 ** ** ** **
8.7 11 606 1.00 109.08 6.0 10.1 6.0 3.4
9.5 12 554 1.10 99.66 6.8 10.3 6.8 3.6
10 12 523 1.15 94.11 7.1 10.4 7.1 3.7
11 13 478 1.25 85.99 7.6 10.5 7.6 3.8 FH053-14P-L80-06F 27 320
12 14 456 1.35 82.13 7.8 10.6 7.8 3.9
13 15 417 1.45 75.04 8.2 10.7 8.2 4.0
16 19 335 1.80 60.26 8.8 11.0 8.8 4.3
17 21 306 2.00 55.06 8.9 11.1 8.9 4.4
7.6 9.2 692 0.90 187.00 4.3 6.5 4.3 3.2
8.3 10 632 0.95 170.85 5.6 9.2 5.6 3.3
9.7 12 540 1.15 146.10 6.9 10.3 6.9 3.6
11 13 494 1.25 133.49 7.5 10.5 7.5 3.8
13 16 403 1.50 109.08 8.3 10.8 8.3 4.1
14 17 369 1.65 99.66 8.6 10.9 8.6 4.2 FH053-14P-80-04E 25 320
15 18 348 1.75 94.11 8.7 10.9 8.7 4.2
17 20 318 1.90 85.99 8.9 11.0 8.9 4.3
19 23 278 2.20 75.04 9.1 11.1 9.1 4.4
24 29 223 2.70 60.26 9.3 11.3 9.3 4.6
26 31 204 2.95 55.06 9.4 11.4 9.4 4.7

230 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.55 kW IE3
50 Hz 60 Hz at 50 Hz

0.55 kW 0.66 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
11 13 486 0.80 87.38 ** ** ** **
12 14 444 0.80 79.84 ** ** ** **
13 16 397 1.30 71.46 8.3 10.8 8.3 4.1
14 18 363 1.30 65.29 8.6 10.9 8.6 4.2
17 20 314 1.95 56.42 8.9 11 8.9 4.3
18 22 287 2.10 51.55 9.0 11.1 9.0 4.4 FH052-14P-L80-06F 27 320
20 24 268 0.80 48.15 ** ** ** **
22 26 243 2.50 43.75 9.2 11.3 9.2 4.6
24 29 222 2.70 39.97 9.3 11.3 9.3 4.6
30 37 173 2.10 31.09 9.5 11.3 9.5 4.6
39 48 134 2.70 24.11 9.6 11.4 9.6 4.7
16
18
20
22
323
295
1.15
1.15
87.38
79.84
8.8
9.0
11.0
11.1
8.8
9.0
4.3
4.4
F
20 24 264 1.90 71.46 9.2 11.2 9.2 4.5
22 26 242 1.90 65.29 9.3 11.3 9.3 4.6 FH052-14P-80-04E 25 320
25 30 209 2.90 56.42 9.4 11.4 9.4 4.7
29 36 178 1.15 48.15 9.5 11.2 9.5 4.5
36 44 146 1.90 39.38 9.6 11.4 9.6 4.7
10 12 526 0.80 94.61 ** ** ** **
11 13 480 0.85 86.31 ** ** ** **
12 14 454 0.90 81.63 2.1 2.6 2.1 2.3
13 16 396 1.05 71.24 3.9 6.4 3.9 2.5
FH043-14P-L80-06F 21 318
13 16 414 1.00 74.46 3.5 5.5 3.5 2.4
15 18 361 1.15 64.98 4.6 7.9 4.6 2.6
18 22 291 1.40 52.27 5.6 8.5 5.6 2.9
20 24 265 1.55 47.68 5.8 8.6 5.8 3.0
11 14 469 0.90 126.72 1.2 0.7 1.2 0.7
12 15 428 0.95 115.6 3.1 4.7 3.1 2.4
15 18 350 1.15 94.61 4.8 8.3 4.8 2.7
16 20 319 1.30 86.31 5.2 8.4 5.2 2.8
17 21 302 1.35 81.63 5.4 8.4 5.4 2.8
FH043-14P-80-04E 19 318
19 23 275 1.50 74.46 5.7 8.5 5.7 2.9
20 24 264 1.55 71.24 5.9 8.6 5.9 3.0
22 26 240 1.70 64.98 6.1 8.7 6.1 3.1
27 33 193 2.10 52.27 6.4 8.8 6.4 3.2
30 36 176 2.30 47.68 6.5 8.9 6.5 3.3
12 15 421 0.80 75.79 ** ** ** **
14 17 384 0.80 69.14 ** ** ** **
15 19 344 1.20 61.98 4.9 8.3 4.9 2.7
17 20 314 1.30 56.54 5.3 8.4 5.3 2.8
19 24 272 1.50 48.94 5.8 8.5 5.8 2.9
21 26 248 1.65 44.64 6.0 8.6 6.0 3.0
23 28 229 0.80 41.20 ** ** ** **
FH042-14P-L80-06F 21 318
25 30 211 1.90 37.95 6.3 8.7 6.3 3.1
27 33 192 2.10 34.62 6.4 8.8 6.4 3.2
28 34 187 1.30 33.69 6.5 8.6 6.5 3.0
30 37 173 2.35 31.06 6.6 8.9 6.6 3.3
33 41 157 2.55 28.33 6.6 8.9 6.6 3.3
36 43 148 2.10 26.60 6.7 8.8 6.7 3.2
46 56 115 2.70 20.63 6.8 8.9 6.8 3.3
19 23 280 1.15 75.79 5.7 8.5 5.7 2.9
21 25 256 1.15 69.14 5.9 8.6 5.9 3.0
23 28 229 1.75 61.98 6.2 8.7 6.2 3.1
25 30 209 1.90 56.54 6.3 8.8 6.3 3.2
29 35 181 2.25 48.94 6.5 8.9 6.5 3.3 FH042-14P-80-04E 19 318
32 39 165 2.45 44.64 6.6 8.9 6.6 3.3
34 42 152 1.15 41.20 6.7 8.7 6.7 3.1
37 45 140 2.85 37.95 6.7 9.0 6.7 3.4
42 51 125 1.90 33.69 6.8 8.9 6.8 3.3

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 231

 PN = 0.55 kW IE3
50 Hz 60 Hz at 50 Hz

0.55 kW 0.66 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
18 22 288 0.80 51.75 ** ** ** **
21 25 252 0.90 45.35 2.6 2.1 2.6 2.1
23 28 229 1.00 41.12 3.2 2.6 3.2 2.6
27 33 195 1.15 35.03 3.8 2.4 3.8 2.4
30 36 177 1.25 31.76 4.1 2.9 4.1 2.9
34 41 155 1.45 27.97 4.3 2.7 4.3 2.7
37 46 141 1.60 25.36 4.5 3.0 4.5 3.0
42 51 125 1.20 22.50 4.6 3.0 4.6 3.0 FH032-14P-L80-06F 20 316
45 55 118 1.90 21.14 4.7 2.9 4.7 2.9
49 60 107 2.10 19.17 4.8 3.2 4.8 3.2
53 65 99 1.55 17.88 4.8 3.1 4.8 3.1
F 59
65
72
79
89
81
2.50
2.75
16.06
14.57
4.9
4.9
3.1
3.3
4.9
4.9
3.1
3.3
68 84 77 2.00 13.81 5.0 3.3 5.0 3.3
86 105 61 2.45 11.03 5.0 3.3 5.0 3.3
20 25 260 0.85 70.17 ** ** ** **
22 27 235 0.95 63.63 3.0 2.6 3.0 2.6
25 30 211 1.05 57.07 3.5 2.3 3.5 2.3
27 33 191 1.15 51.75 3.9 2.8 3.9 2.8
31 38 168 1.35 45.35 4.2 2.6 4.2 2.6
35 42 152 1.45 41.12 4.4 3.0 4.4 3.0
41 49 130 1.70 35.03 4.6 2.8 4.6 2.8
FH032-14P-80-04E 18 316
45 54 117 1.90 31.76 4.7 3.1 4.7 3.1
51 61 103 2.15 27.97 4.8 3.0 4.8 3.0
56 68 94 2.35 25.36 4.9 3.2 4.9 3.2
63 76 83 1.80 22.50 4.9 3.2 4.9 3.2
67 81 78 2.85 21.14 5.0 3.2 5.0 3.2
79 96 66 2.30 17.88 5.0 3.3 5.0 3.3
103 125 51 2.95 13.81 5.1 3.4 5.1 3.4
32 39 163 0.80 29.32 ** ** ** **
36 44 147 0.90 26.39 4.6 2.1 4.6 2.1
43 53 122 1.10 21.89 4.8 2.0 4.8 2.0
47 58 112 0.80 20.08 ** ** ** **
48 59 109 1.20 19.70 4.9 2.3 4.9 2.3
50 61 105 1.25 18.88 4.9 2.1 4.9 2.1
56 68 94 1.40 17.00 5.0 2.3 5.0 2.3
57 70 92 1.45 16.48 5.0 2.2 5.0 2.2
FH022-14P-L80-06F 17 314
60 73 88 1.00 15.82 5.0 2.4 5.0 2.4
64 78 82 1.60 14.84 5.1 2.4 5.1 2.4
78 95 68 1.25 12.19 5.1 2.5 5.1 2.5
87 106 61 2.15 10.89 5.1 2.5 5.1 2.5
99 121 53 1.60 9.52 5.2 2.5 5.2 2.5
133 162 40 2.15 7.11 4.6 2.6 4.6 2.6
154 188 34 2.50 6.13 4.4 2.6 4.4 2.6
177 216 30 2.85 5.35 4.2 2.6 4.2 2.6

Legend see page 211 ** ... on request

232 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.55 kW IE3
50 Hz 60 Hz at 50 Hz

0.55 kW 0.66 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
32 39 162 0.85 43.83 ** ** ** **
38 46 139 0.95 37.52 4.6 1.9 4.6 1.9
42 51 125 1.05 33.78 4.8 2.2 4.8 2.2
48 59 108 1.20 29.32 4.9 2.1 4.9 2.1
54 65 98 1.35 26.39 5.0 2.3 5.0 2.3
57 69 92 0.95 24.76 5.0 2.4 5.0 2.4
65 79 81 1.65 21.89 5.1 2.3 5.1 2.3
71 86 74 1.15 20.08 5.1 2.4 5.1 2.4
72 87 73 1.80 19.70 5.1 2.4 5.1 2.4
75 91 70 1.90 18.88 5.1 2.3 5.1 2.3
84 101 63 2.10 17.00 5.1 2.5 5.1 2.5
86
90
104
109
61
59
2.15
1.45
16.48
15.82
5.1
5.2
2.4
2.5
5.1
5.2
2.4
2.5
FH022-14P-80-04E 15 314
F
96 116 55 2.40 14.84 5.2 2.5 5.2 2.5
116 141 45 1.90 12.19 4.9 2.6 4.9 2.6
117 142 45 2.95 12.09 4.9 2.5 4.9 2.5
130 158 40 3.25 10.89 4.7 2.6 4.7 2.6
149 181 35 2.40 9.52 4.5 2.6 4.5 2.6
200 242 26 3.20 7.11 4.0 2.6 4.0 2.6
232 281 23 3.75 6.13 3.8 2.7 3.8 2.7
265 321 20 4.25 5.35 3.6 2.7 3.6 2.7
361 438 15 5.00 3.93 3.2 2.7 3.2 2.7

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 233

 PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.28 0.34 22679 0.80 3343.64 ** ** ** **
0.29 0.35 22220 0.85 3284.26 ** ** ** **
0.35 0.42 18203 1.00 2711.35 77.3 115.1 77.3 115.1 FH155-11P-90S/L-06E 697 346
0.41 0.50 15082 1.20 2269.72 88.5 117.6 88.5 117.6
0.51 0.62 12036 1.50 1839.52 96.5 120.1 96.5 120.1
0.30 0.36 21517 0.85 4838.19 ** ** ** **
0.35 0.43 18030 1.00 4085.50 78.0 115.2 78.0 115.2
0.36 0.44 17270 1.05 3923.28 81.0 115.8 81.0 115.8
0.43 0.52 14568 1.25 3343.64 90.0 118.0 90.0 118.0
0.44 0.53 14272 1.30 3284.26 90.9 118.3 90.9 118.3 FH155-11P-80-04F 691 346
0.53 0.64 11632 1.55 2711.35 97.3 120.5 97.3 120.5
F 0.54
0.63
0.65
0.77
11390
9563
1.60
1.90
2661.75
2269.72
97.8
101.3
120.7
122.2
97.8
101.3
120.7
122.2
0.78 0.95 7552 2.40 1839.52 104.3 123.8 104.3 123.8
0.41 0.49 15865 1.15 2318.30 86.0 117.0 86.0 117.0
0.47 0.57 13553 1.35 1996.74 92.8 118.9 92.8 118.9
0.51 0.62 12378 1.50 1834.90 95.7 119.8 95.7 119.8
0.54 0.66 11626 1.55 1727.10 97.3 120.5 97.3 120.5
0.59 0.71 10719 1.70 1602.16 99.2 121.2 99.2 121.2
0.66 0.81 9376 1.95 1415.96 101.6 122.3 101.6 122.3
FH154-11P-90S/L-06E 684 344
0.68 0.83 9118 2.00 1379.93 102.0 122.5 102.0 122.5
0.69 0.84 9032 2.00 1366.97 102.1 122.6 102.1 122.6
0.77 0.94 7959 2.30 1219.56 103.7 123.5 103.7 123.5
0.79 0.96 7798 2.35 1197.38 103.9 123.6 103.9 123.6
0.89 1.1 6770 2.70 1054.87 105.2 124.4 105.2 124.4
0.91 1.1 6605 2.75 1031.30 105.4 124.6 105.4 124.6
0.62 0.75 10153 1.80 2318.30 100.2 121.7 100.2 121.7
0.72 0.87 8637 2.10 1996.74 102.7 122.9 102.7 122.9
0.78 0.95 7871 2.30 1834.90 103.8 123.5 103.8 123.5
FH154-11P-80-04F 678 344
0.83 1.0 7363 2.45 1727.10 104.5 124.0 104.5 124.0
0.89 1.1 6759 2.70 1602.16 105.2 124.5 105.2 124.5
0.90 1.1 6667 2.70 1580.39 105.3 124.5 105.3 124.5
0.41 0.5 15984 0.85 2307.03 ** ** ** **
0.47 0.57 13879 0.95 2011.51 67.4 84.1 67.4 84.1
0.53 0.64 12214 1.10 1781.14 72.9 85.7 72.9 85.7
0.54 0.66 11882 1.10 1732.67 73.9 86.1 73.9 86.1
0.61 0.74 10584 1.25 1552.98 77.3 87.3 77.3 87.3
0.63 0.77 10160 1.30 1493.78 78.3 87.7 78.3 87.7
0.70 0.86 9042 1.45 1337.70 80.7 88.8 80.7 88.8
0.72 0.88 8786 1.50 1302.43 81.3 89.0 81.3 89.0
0.80 0.98 7843 1.70 1172.32 83.0 89.9 83.0 89.9 FH124-11P-90S/L-06E 432 340
0.82 0.99 7707 1.70 1151.94 83.2 90.1 83.2 90.1
0.84 1.0 7490 1.75 1121.89 83.5 90.3 83.5 90.3
0.92 1.1 6768 1.95 1022.15 84.6 91.0 84.6 91.0
0.97 1.2 6370 2.05 966.09 85.2 91.4 85.2 91.4
1.0 1.3 5929 2.20 904.76 85.7 91.8 85.7 91.8
1.1 1.3 5746 2.30 880.46 86.0 92.0 86.0 92.0
1.2 1.5 5084 2.60 788.86 86.7 92.6 86.7 92.6
1.3 1.5 4793 2.75 748.37 87.0 92.9 87.0 92.9
0.62 0.75 10314 1.30 2307.03 78.0 87.6 78.0 87.6
0.71 0.87 8919 1.50 2011.51 81.0 88.9 81.0 88.9
0.80 0.98 7833 1.70 1781.14 83.0 90.0 83.0 90.0
0.83 1.0 7604 1.75 1732.67 83.3 90.2 83.3 90.2
0.92 1.1 6759 1.95 1552.98 84.6 91.0 84.6 91.0 FH124-11P-80-04F 426 340
0.96 1.2 6475 2.05 1493.78 85.0 91.3 85.0 91.3
1.1 1.3 5738 2.30 1337.70 86.0 92.0 86.0 92.0
1.2 1.5 4956 2.65 1172.32 86.8 92.7 86.8 92.7
1.3 1.6 4713 2.80 1121.89 87.1 93.0 87.1 93.0

Legend see page 211 ** ... on request

234 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.62 0.75 10593 0.80 1525.85 ** ** ** **
0.64 0.78 10235 0.80 1474.19 ** ** ** **
0.71 0.87 9115 0.90 1318.33 39.7 59.0 39.7 59.0
0.73 0.89 8830 0.95 1279.68 41.4 59.3 41.4 59.3
0.81 0.99 7950 1.05 1156.94 46.0 60.3 46.0 60.3
0.85 1.0 7582 1.10 1105.64 47.7 60.7 47.7 60.7
0.94 1.1 6859 1.20 1004.29 50.6 61.5 50.6 61.5
FH104-11P-90S/L-06E 292 336
1.1 1.3 6060 1.35 892.89 53.3 62.4 53.3 62.4
1.2 1.5 5218 1.55 775.08 55.6 63.4 55.6 63.4
1.3 1.6 4951 1.65 738.55 56.3 63.7 56.3 63.7
1.4 1.7 4462 1.80 669.67 57.4 64.2 57.4 64.2
1.5
1.7
1.8
2.1
4254
3622
1.90
2.25
641.10
553.91
57.8
59.0
64.4
65.1
57.8
59.0
64.4
65.1
F
2.0 2.4 3040 2.65 472.61 59.9 65.8 59.9 65.8
0.63 0.76 10390 0.80 2276.77 ** ** ** **
0.72 0.88 8982 0.90 1976.36 40.5 59.2 40.5 59.2
0.81 0.99 7940 1.05 1757.78 46.1 60.3 46.1 60.3
0.84 1.0 7713 1.05 1707.58 47.1 60.6 47.1 60.6
0.94 1.1 6850 1.20 1525.85 50.6 61.5 50.6 61.5
0.97 1.2 6605 1.25 1474.19 51.5 61.8 51.5 61.8
1.1 1.3 5870 1.40 1318.33 53.8 62.6 53.8 62.6
1.2 1.5 5109 1.60 1156.94 55.9 63.5 55.9 63.5 FH104-11P-80-04F 286 336
1.3 1.6 4872 1.65 1105.64 56.5 63.7 56.5 63.7
1.4 1.7 4389 1.85 1004.29 57.5 64.3 57.5 64.3
1.6 1.9 3862 2.10 892.89 58.6 64.9 58.6 64.9
1.8 2.2 3304 2.45 775.08 59.5 65.5 59.5 65.5
1.9 2.4 3129 2.60 738.55 59.7 65.7 59.7 65.7
2.1 2.6 2808 2.85 669.67 60.2 66.0 60.2 66.0
2.2 2.7 2671 3.00 641.10 60.3 66.2 60.3 66.2
1.1 1.4 5715 0.80 823.17 ** ** ** **
1.3 1.6 5087 0.90 735.68 23.6 38.3 23.6 38.3
1.5 1.8 4265 1.10 621.95 29.4 39.3 29.4 39.3
1.6 1.9 4129 1.10 602.09 30.2 39.5 30.2 39.5
1.8 2.2 3462 1.30 509.01 33.4 40.4 33.4 40.4
FH094-11P-90S/L-06E 187 332
1.9 2.3 3307 1.40 488.23 34.0 40.6 34.0 40.6
2.3 2.8 2767 1.65 412.76 35.9 41.3 35.9 41.3
2.7 3.3 2283 2.00 345.53 37.2 42.0 37.2 42.0
2.8 3.5 2180 2.10 331.24 37.5 42.1 37.5 42.1
3.4 4.1 1812 2.50 280.04 38.2 42.6 38.2 42.6
1.1 1.3 5963 0.80 1306.62 ** ** ** **
1.3 1.6 4850 0.95 1069.42 25.5 38.6 25.5 38.6
1.5 1.8 4398 1.05 973.69 28.6 39.2 28.6 39.2
1.7 2.1 3688 1.25 823.17 32.4 40.1 32.4 40.1
1.9 2.4 3276 1.40 735.68 34.1 40.7 34.1 40.7
FH094-11P-80-04F 181 332
2.3 2.8 2741 1.65 621.95 35.9 41.4 35.9 41.4
2.4 2.9 2648 1.70 602.09 36.2 41.5 36.2 41.5
2.8 3.4 2206 2.05 509.01 37.4 42.1 37.4 42.1
2.9 3.6 2107 2.15 488.23 37.6 42.2 37.6 42.2
3.5 4.2 1749 2.60 412.76 38.4 42.7 38.4 42.7
3.3 4.0 2198 2.05 288.50 37.4 42.1 37.4 42.1
3.9 4.7 1858 2.45 243.90 38.1 42.5 38.1 42.5 FH093-11P-90S/L-06E 174 330
4.5 5.4 1609 2.80 211.14 38.6 42.9 38.6 42.9
1.8 2.2 3582 0.85 517.08 ** ** ** **
1.9 2.3 3512 0.90 507.90 13.9 22.4 13.9 7.1
2.0 2.4 3313 0.95 480.21 16.3 27.5 16.3 7.4
2.2 2.7 2881 1.05 419.30 20.3 36.2 20.3 8.1
FH084-11P-90S/L-06E 132 328
2.3 2.8 2823 1.10 411.63 20.8 37.2 20.8 8.1
2.7 3.3 2387 1.30 351.00 23.6 41.3 23.6 8.8
2.9 3.5 2207 1.40 325.80 24.5 41.6 24.5 9.1
3.3 4.0 1911 1.60 284.47 25.8 42.1 25.8 9.6

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 235

 PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
1.7 2.1 3816 0.80 836.22 ** ** ** **
1.9 2.3 3401 0.90 748.21 15.3 25.4 15.3 7.3
2.0 2.4 3282 0.95 723.59 16.7 28.3 16.7 7.4
2.3 2.8 2848 1.10 631.81 20.6 36.8 20.6 8.1
2.4 2.9 2735 1.10 606.72 21.4 38.6 21.4 8.3
2.8 3.4 2312 1.30 517.08 24.0 41.4 24.0 8.9
3.0 3.6 2134 1.45 480.21 24.9 41.7 24.9 9.2 FH084-11P-80-04F 126 328
3.4 4.1 1848 1.65 419.30 26.1 42.2 26.1 9.7
3.5 4.2 1810 1.70 411.63 26.2 42.2 26.2 9.7
3.6 4.3 1768 1.70 401.99 26.4 42.3 26.4 9.8
4.1 5.0 1525 2.00 351.00 27.2 42.6 27.2 10.1
F 4.4
5.0
5.3
6.1
1406
1210
2.15
2.50
325.80
284.47
27.5
28.0
42.8
43.1
27.5
28.0
10.3
10.6
2.6 3.2 2732 1.10 358.52 21.4 38.6 21.4 8.3
3.3 4.0 2162 1.40 283.76 24.7 41.7 24.7 9.2
3.8 4.6 1888 1.60 247.77 25.9 42.1 25.9 9.6
4.3 5.2 1668 1.80 218.97 26.7 42.4 26.7 9.9
5.1 6.2 1411 2.15 185.17 27.5 42.8 27.5 10.3 FH083-11P-90S/L-06E 119 326
5.2 6.4 1374 2.20 180.28 27.6 42.9 27.6 10.4
5.9 7.2 1213 2.50 159.17 28.0 43.1 28.0 10.6
6.6 8.0 1087 2.80 142.69 28.3 43.3 28.3 10.8
6.8 8.2 1059 2.85 138.95 28.4 43.4 28.4 10.9
4.0 4.9 1796 1.70 358.52 26.3 42.2 26.3 9.7
5.0 6.1 1421 2.15 283.76 27.5 42.8 27.5 10.3
FH083-11P-80-04F 113 326
5.8 7.0 1241 2.45 247.77 28.0 43.1 28.0 10.6
6.5 7.9 1097 2.75 218.97 28.3 43.3 28.3 10.8
4.0 4.8 1807 0.85 237.15 ** ** ** **
4.8 5.9 1483 1.05 194.58 15.7 16.0 15.7 4.7
6.2 7.6 1148 1.35 150.69 17.8 16.7 17.8 5.4
8.2 10 873 1.75 114.62 18.9 17.2 18.9 6.0 FH073-11P-90S/L-06E 72 324
9.9 12 720 2.10 94.52 19.4 17.5 19.3 6.3
12 15 591 2.55 77.53 19.8 17.8 17.8 6.5
14 17 502 3.00 65.88 20.0 18.0 16.7 6.7
3.7 4.5 1930 0.80 385.37 ** ** ** **
4.7 5.7 1530 1.00 305.42 15.3 15.9 15.3 4.6
6.0 7.3 1188 1.30 237.15 17.6 16.6 17.6 5.3
FH073-11P-80-04F 66 324
7.3 8.9 975 1.55 194.58 18.6 17.0 18.6 5.8
9.5 12 755 2.00 150.69 19.3 17.5 19.3 6.2
12 15 574 2.65 114.62 19.8 17.8 17.7 6.6
7.2 8.8 992 0.85 130.15 ** ** ** **
7.9 9.6 909 0.95 119.35 7.3 11.6 7.3 2.3
9.6 12 749 1.10 98.34 9.3 12.8 9.3 2.9
10 13 687 1.20 90.17 9.9 13.0 9.9 3.0
12 14 613 1.35 80.48 10.5 13.3 10.5 3.3
FH063-11P-90S/L-06E 49 322
13 16 562 1.50 73.80 10.8 13.4 10.8 3.5
14 18 497 1.65 65.26 11.2 13.6 11.2 3.7
16 19 456 1.80 59.84 11.4 13.8 11.4 3.8
17 21 416 2.00 54.63 11.6 13.9 11.6 4.0
19 23 382 2.15 50.10 11.7 14.0 11.7 4.0
6.9 8.4 1035 0.80 206.59 ** ** ** **
7.5 9.2 949 0.90 189.44 6.7 10.3 6.7 2.2
8.5 10 847 1.00 169.09 8.2 12.5 8.2 2.6
9.2 11 777 1.10 155.05 9.0 12.7 9.0 2.8
11 13 652 1.30 130.15 10.2 13.1 10.2 3.2
12 15 598 1.40 119.35 10.6 13.3 10.6 3.3
15 18 493 1.70 98.34 11.2 13.7 11.2 3.7 FH063-11P-80-04F 43 322
16 19 452 1.85 90.17 11.4 13.8 11.4 3.8
18 22 403 2.05 80.48 11.6 13.9 11.6 4.0
19 24 370 2.25 73.80 11.8 14.0 11.8 4.1
22 27 327 2.55 65.26 11.9 14.2 11.9 4.2
24 29 300 2.75 59.84 12.0 14.3 11.7 4.3
26 32 274 3.00 54.63 12.1 14.4 11.3 4.4

Legend see page 211 ** ... on request

236 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
19 23 378 2.20 49.67 11.7 14.0 11.7 4.1
21 25 347 2.40 45.55 11.9 14.1 11.9 4.2
23 27 317 2.60 41.66 12.0 14.2 11.9 4.3 FH062-11P-90S/L-06E 48 322
25 30 291 2.85 38.2 12.0 14.3 11.5 4.3
46 56 156 2.75 20.49 12.4 14.6 9.2 4.6
9.4 11 759 0.80 99.66 ** ** ** **
10 12 717 0.85 94.11 ** ** ** **
11 13 655 0.95 85.99 5.1 8.2 5.1 3.3
11 14 626 1.00 82.13 5.7 9.5 5.7 3.4 FH053-11P-90S/L-06E 33 320
13 15 572 1.05 75.04 6.5 10.2 6.5 3.5
16 19 459 1.35 60.26 7.8 10.6 7.8 3.9
17
9.8
21
12
420
732
1.45
0.85
55.06
146.10
8.2
**
10.7
**
8.2
**
4.0
**
F
11 13 669 0.90 133.49 4.8 7.5 4.8 3.2
13 16 546 1.10 109.08 6.9 10.3 6.9 3.6
14 17 499 1.20 99.66 7.4 10.5 7.4 3.8
15 18 471 1.30 94.11 7.7 10.6 7.7 3.9 FH053-11P-80-04F 26 320
17 20 431 1.40 85.99 8.1 10.7 8.1 4.0
19 23 376 1.60 75.04 8.5 10.8 8.5 4.1
24 29 302 2.00 60.26 9.0 11.1 9.0 4.4
26 32 276 2.20 55.06 9.1 11.1 9.1 4.4
13 16 545 0.95 71.46 6.9 10.3 6.9 3.6
14 18 497 0.95 65.29 7.4 10.5 7.4 3.8
17 20 430 1.40 56.42 8.1 10.7 8.1 4.0
18 22 393 1.55 51.55 8.4 10.8 8.4 4.1
21 26 333 1.80 43.75 8.8 11.0 8.8 4.3
24 29 305 2.00 39.97 8.9 11.1 8.9 4.4
FH052-11P-90S/L-06E 32 320
26 32 273 2.20 35.81 9.1 11.2 9.1 4.5
29 35 249 2.40 32.72 9.2 11.2 9.2 4.5
30 37 237 1.55 31.09 9.3 11.0 9.3 4.3
34 42 210 2.90 27.56 9.4 11.4 9.4 4.7
39 47 184 2.00 24.11 9.5 11.2 9.5 4.5
48 58 150 2.40 19.73 9.6 11.3 9.6 4.6
16 20 438 0.85 87.38 ** ** ** **
18 22 400 0.85 79.84 ** ** ** **
20 24 358 1.40 71.46 8.6 10.9 8.6 4.2
22 27 327 1.40 65.29 8.8 11 8.8 4.3
25 31 283 2.15 56.42 9.1 11.1 9.1 4.4
28 34 258 2.35 51.55 9.2 11.2 9.2 4.5 FH052-11P-80-04F 26 320
30 36 241 0.85 48.15 ** ** ** **
33 40 219 2.75 43.75 9.3 11.3 9.3 4.6
36 44 200 3.00 39.97 9.4 11.4 9.4 4.7
46 56 156 2.35 31.09 9.5 11.3 9.5 4.6
59 72 121 3.00 24.11 9.6 11.5 9.6 4.8
14 18 495 0.85 64.98 ** ** ** **
18 22 398 1.05 52.27 3.8 6.2 3.8 2.5 FH043-11P-90S/L-06E 27 318
20 24 363 1.15 47.68 4.5 7.7 4.5 2.6
15 18 474 0.85 94.61 ** ** ** **
17 20 432 0.95 86.31 2.9 4.3 2.9 2.4
18 21 409 1.00 81.63 3.6 5.7 3.6 2.4
19 23 373 1.10 74.46 4.4 7.5 4.4 2.6
FH043-11P-80-04F 21 318
20 24 357 1.15 71.24 4.7 8.1 4.7 2.6
22 27 325 1.25 64.98 5.1 8.4 5.1 2.8
27 33 262 1.55 52.27 5.9 8.6 5.9 3.0
30 36 239 1.70 47.68 6.1 8.7 6.1 3.1

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 237

 PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
15 18 472 0.85 61.98 ** ** ** **
17 20 431 0.95 56.54 3.0 4.5 3.0 2.4
19 23 373 1.10 48.94 4.4 7.5 4.4 2.6
21 26 340 1.20 44.64 4.9 8.3 4.9 2.7
25 30 289 1.40 37.95 5.6 8.5 5.6 2.9
27 33 264 1.55 34.62 5.9 8.6 5.9 3.0
28 34 257 0.95 33.69 5.9 8.2 5.9 2.6
30 37 237 1.70 31.06 6.1 8.7 6.1 3.1 FH042-11P-90S/L-06E 27 318
33 40 216 1.90 28.33 6.3 8.7 6.3 3.1
35 43 203 1.55 26.60 6.4 8.5 6.4 2.9
39 48 182 2.20 23.91 6.5 8.8 6.5 3.2
F 43
46
52
56
166
157
2.45
2.00
21.81
20.63
6.6
6.6
8.9
8.7
6.6
6.6
3.3
3.1
52 63 138 2.95 18.06 6.7 9.0 6.7 3.4
56 68 129 2.40 16.88 6.8 8.8 6.8 3.2
19 23 380 0.85 75.79 ** ** ** **
21 25 346 0.85 69.14 ** ** ** **
23 28 310 1.30 61.98 5.3 8.4 5.3 2.8
25 31 283 1.40 56.54 5.7 8.5 5.7 2.9
29 36 245 1.65 48.94 6.0 8.6 6.0 3.0
32 39 224 1.80 44.64 6.2 8.7 6.2 3.1
35 42 206 0.85 41.20 ** ** ** **
FH042-11P-80-04F 20 318
38 46 190 2.15 37.95 6.4 8.8 6.4 3.2
41 50 173 2.35 34.62 6.5 8.9 6.5 3.3
42 52 169 1.40 33.69 6.6 8.6 6.6 3.0
46 56 156 2.60 31.06 6.6 8.9 6.6 3.3
50 61 142 2.85 28.33 6.7 9.0 6.7 3.4
54 65 133 2.35 26.60 6.8 8.8 6.8 3.2
69 84 103 3.00 20.63 6.9 9.0 6.9 3.4
27 33 267 0.85 35.03 ** ** ** **
30 36 242 0.95 31.76 2.8 2.6 2.8 2.6
34 41 213 1.05 27.97 3.5 2.3 3.5 2.3
37 45 193 1.15 25.36 3.8 2.8 3.8 2.8
42 51 171 0.90 22.50 4.2 2.8 4.2 2.8
44 54 161 1.40 21.14 4.3 2.7 4.3 2.7
49 60 146 1.55 19.17 4.4 3.0 4.4 3.0
53 64 136 1.15 17.88 4.5 3.0 4.5 3.0
59 71 122 1.80 16.06 4.7 2.9 4.7 2.9 FH032-11P-90S/L-06E 25 316
65 79 111 2.00 14.57 4.8 3.2 4.8 3.2
68 83 105 1.45 13.81 4.8 3.1 4.8 3.1
75 92 95 2.35 12.50 4.9 3.1 4.9 3.1
83 101 86 2.55 11.33 4.9 3.3 4.9 3.3
85 104 84 1.80 11.03 4.9 3.2 4.9 3.2
96 117 74 2.90 9.76 5.0 3.2 5.0 3.2
106 129 67 3.00 8.85 5.0 3.4 5.0 3.4
113 137 63 2.40 8.33 5.0 3.3 5.0 3.3
25 30 286 0.80 57.07 ** ** ** **
28 34 259 0.85 51.75 ** ** ** **
32 38 227 1.00 45.35 3.2 2.2 3.2 2.2
35 42 206 1.10 41.12 3.6 2.7 3.6 2.7
41 50 175 1.30 35.03 4.1 2.6 4.1 2.6
45 55 159 1.40 31.76 4.3 2.9 4.3 2.9
51 62 140 1.60 27.97 4.5 2.8 4.5 2.8
52 63 139 0.90 27.67 4.5 2.9 4.5 2.9
FH032-11P-80-04F 19 316
56 69 127 1.75 25.36 4.6 3.1 4.6 3.1
64 77 113 1.35 22.50 4.7 3.1 4.7 3.1
68 82 106 2.10 21.14 4.8 3.0 4.8 3.0
75 91 96 2.30 19.17 4.9 3.2 4.9 3.2
80 97 90 1.70 17.88 4.9 3.2 4.9 3.2
89 108 80 2.75 16.06 4.9 3.2 4.9 3.2
104 126 69 2.20 13.81 5.0 3.3 5.0 3.3
130 158 55 2.75 11.03 5.1 3.4 5.1 3.4

Legend see page 211 ** ... on request

238 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
43 52 167 0.80 21.89 ** ** ** **
48 58 150 0.90 19.70 4.5 2.1 4.5 2.1
50 61 144 0.95 18.88 4.6 1.9 4.6 1.9
55 67 130 1.05 17.00 4.7 2.2 4.7 2.2
57 69 126 1.05 16.48 4.8 2.0 4.8 2.0
63 77 113 1.15 14.84 4.9 2.3 4.9 2.3
77 94 93 0.95 12.19 5.0 2.3 5.0 2.3
FH022-11P-90S/L-06E 23 314
78 95 92 1.45 12.09 5.0 2.2 5.0 2.2
86 105 83 1.60 10.89 5.0 2.4 5.0 2.4
99 120 73 1.20 9.52 5.1 2.4 5.1 2.4
132 161 54 1.60 7.11 4.8 2.5 4.8 2.5
153
176
187
214
47
41
1.80
2.10
6.13
5.35
4.5
4.3
2.5
2.6
4.5
4.3
2.5
2.6
F
239 291 30 2.45 3.93 3.8 2.6 3.8 2.6
42 52 169 0.80 33.78 ** ** ** **
49 59 147 0.90 29.32 4.6 1.9 4.6 1.9
54 66 132 1.00 26.39 4.7 2.2 4.7 2.2
65 79 110 1.20 21.89 4.9 2.1 4.9 2.1
71 87 101 0.85 20.08 ** ** ** **
73 88 99 1.35 19.70 5.0 2.3 5.0 2.3
76 92 95 1.40 18.88 5.0 2.2 5.0 2.2
84 102 85 1.55 17.00 5.0 2.4 5.0 2.4
87 106 83 1.60 16.48 5.1 2.3 5.1 2.3
90 110 79 1.10 15.82 5.1 2.4 5.1 2.4 FH022-11P-80-04F 17 314
96 117 74 1.75 14.84 5.1 2.4 5.1 2.4
117 143 61 1.40 12.19 5.0 2.5 5.0 2.5
118 144 61 2.15 12.09 5.0 2.4 5.0 2.4
131 160 55 2.40 10.89 4.8 2.5 4.8 2.5
150 183 48 1.80 9.52 4.5 2.5 4.5 2.5
201 245 36 2.40 7.11 4.1 2.6 4.1 2.6
233 284 31 2.75 6.13 3.8 2.6 3.8 2.6
267 325 27 3.15 5.35 3.7 2.6 3.7 2.6
364 443 20 3.70 3.93 3.3 2.7 3.3 2.7

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 239

 PN = 1.1 kW IE3
50 Hz 60 Hz at 50 Hz

1.1 kW 1.3 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.44 0.53 21435 0.85 3343.64 ** ** ** **
0.54 0.65 17204 1.05 2711.35 81.3 115.9 81.3 115.9
0.55 0.66 16846 1.10 2661.75 82.6 116.2 82.6 116.2 FH155-11P-90S/L-04E 695 346
0.64 0.78 14218 1.30 2269.72 91.0 118.3 91.0 118.3
0.79 0.96 11346 1.60 1839.52 97.9 120.7 97.9 120.7
0.42 0.51 22053 0.85 2269.72 ** ** ** **
FH155-11P-100L-06D 701 346
0.52 0.63 17690 1.05 1839.52 79.4 115.5 79.4 115.5
0.63 0.76 15002 1.20 2318.30 88.7 117.7 88.7 117.7
0.73 0.88 12789 1.45 1996.74 94.7 119.5 94.7 119.5
0.79 0.96 11704 1.55 1834.90 97.2 120.4 97.2 120.4
0.84 1.0 10971 1.65 1727.10 98.7 121.0 98.7 121.0
F 0.91
0.92
1.1
1.1
10115
9956
1.80
1.85
1602.16
1580.39
100.3
100.6
121.7
121.8
100.3
100.6
121.7
121.8
FH154-11P-90S/L-04E 682 344

1.0 1.2 8847 2.05 1415.96 102.4 122.7 102.4 122.7

1.1 1.3 8604 2.10 1379.93 102.8 122.9 102.8 122.9
1.2 1.4 7510 2.40 1219.56 104.3 123.8 104.3 123.8
1.4 1.7 6375 2.85 1054.87 105.7 124.8 105.7 124.8
0.41 0.5 23114 0.80 2318.30 ** ** ** **
0.48 0.58 19786 0.95 1996.74 70.0 113.8 70.0 113.8
0.52 0.63 18145 1.00 1834.90 77.6 115.1 77.6 115.1
0.56 0.67 17009 1.10 1727.10 82.0 116.0 82.0 116.0
0.60 0.73 15746 1.15 1602.16 86.4 117.1 86.4 117.1
0.61 0.74 15500 1.20 1580.39 87.2 117.3 87.2 117.3
0.68 0.82 13802 1.35 1415.96 92.1 118.7 92.1 118.7
0.70 0.84 13451 1.35 1379.93 93.1 119.0 93.1 119.0
FH154-11P-100L-06D 688 344
0.79 0.96 11790 1.55 1219.56 97.0 120.3 97.0 120.3
0.80 0.97 11552 1.60 1197.38 97.5 120.5 97.5 120.5
0.91 1.1 10093 1.80 1054.87 100.4 121.7 100.4 121.7
0.93 1.1 9828 1.85 1029.25 100.8 121.9 100.8 121.9
1.1 1.3 8473 2.15 898.51 103.0 123.0 103.0 123.0
1.2 1.5 7178 2.55 773.88 104.7 124.1 104.7 124.1
1.3 1.5 7112 2.55 766.77 104.8 124.2 104.8 124.2
1.4 1.7 6105 2.95 669.37 105.9 125.0 105.9 125.0
0.63 0.76 15114 0.90 2307.03 62.5 82.9 62.5 82.9
0.72 0.87 13124 1.00 2011.51 70.0 84.9 70.0 84.9
0.82 0.99 11550 1.15 1781.14 74.8 86.4 74.8 86.4
0.84 1.0 11212 1.20 1732.67 75.7 86.7 75.7 86.7
0.94 1.1 10008 1.30 1552.98 78.7 87.9 78.7 87.9
0.97 1.2 9587 1.40 1493.78 79.6 88.3 79.6 88.3
0.98 1.2 9576 1.40 1492.05 79.6 88.3 79.6 88.3
1.1 1.3 8533 1.55 1337.70 81.7 89.3 81.7 89.3
FH124-11P-90S/L-04E 430 340
1.2 1.5 7401 1.80 1172.32 83.7 90.4 83.7 90.4
1.3 1.5 7272 1.80 1151.94 83.9 90.5 83.9 90.5
1.4 1.7 6386 2.05 1022.15 85.2 91.3 85.2 91.3
1.5 1.8 5999 2.20 966.09 85.7 91.7 85.7 91.7
1.6 1.9 5583 2.35 904.76 86.2 92.1 86.2 92.1
1.7 2.0 5422 2.40 880.46 86.3 92.3 86.3 92.3
1.8 2.2 4787 2.75 788.86 87.0 92.9 87.0 92.9
1.9 2.3 4582 2.85 758.19 87.2 93.1 87.2 93.1

Legend see page 211 ** ... on request

240 WG20 Gear Units and Geared Motors www.weg.net

 PN = 1.1 kW IE3
50 Hz 60 Hz at 50 Hz

1.1 kW 1.3 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.55 0.67 17275 0.80 1732.67 ** ** ** **
0.62 0.75 15452 0.85 1552.98 ** ** ** **
0.64 0.78 14832 0.90 1493.78 63.7 83.2 63.7 83.2
0.72 0.87 13228 1.00 1337.70 69.7 84.8 69.7 84.8
0.74 0.89 12853 1.05 1302.43 70.9 85.1 70.9 85.1
0.82 0.99 11522 1.15 1172.32 74.9 86.4 74.9 86.4
0.83 1.0 11321 1.15 1151.94 75.4 86.6 75.4 86.6
0.86 1.0 11003 1.20 1121.89 76.3 86.9 76.3 86.9
0.94 1.1 9963 1.35 1022.15 78.8 87.9 78.8 87.9
FH124-11P-100L-06D 436 340
0.99 1.2 9398 1.40 966.09 80.0 88.4 80.0 88.4
1.1 1.3 8765 1.50 904.76 81.3 89.1 81.3 89.1
1.2
1.3
1.5
1.5
7564
7255
1.75
1.80
788.86
758.19
83.4
83.9
90.2
90.5
83.4
83.9
90.2
90.5
F
1.4 1.7 6435 2.05 679.51 85.1 91.3 85.1 91.3
1.5 1.8 6153 2.15 652.50 85.5 91.6 85.5 91.6
1.6 2.0 5461 2.40 585.14 86.3 92.2 86.3 92.2
1.7 2.1 5224 2.50 562.05 86.6 92.5 86.6 92.5
2.0 2.4 4415 2.95 484.00 87.4 93.2 87.4 93.2
0.95 1.2 10037 0.80 1525.85 ** ** ** **
0.99 1.2 9678 0.85 1474.19 ** ** ** **
1.1 1.3 8619 0.95 1318.33 42.6 59.6 42.6 59.6
1.3 1.6 7170 1.15 1105.64 49.4 61.2 49.4 61.2
1.4 1.8 6486 1.25 1004.29 51.9 62.0 51.9 62.0
1.6 2.0 5731 1.40 892.89 54.2 62.8 54.2 62.8
1.7 2.0 5558 1.45 867.71 54.7 63.0 54.7 63.0
1.9 2.3 4924 1.65 775.08 56.4 63.7 56.4 63.7 FH104-11P-90S/L-04E 290 336
2.0 2.4 4672 1.75 738.55 56.9 64.0 56.9 64.0
2.2 2.6 4201 1.95 669.67 57.9 64.5 57.9 64.5
2.3 2.7 4014 2.00 641.10 58.3 64.7 58.3 64.7
2.6 3.2 3418 2.35 553.91 59.3 65.4 59.3 65.4
2.7 3.2 3358 2.40 545.32 59.4 65.4 59.4 65.4
3.1 3.7 2862 2.80 472.61 60.1 66.0 60.1 66.0
3.2 3.8 2773 2.90 459.75 60.2 66.1 60.2 66.1
0.96 1.2 10013 0.80 1004.29 ** ** ** **
1.1 1.3 8848 0.95 892.89 41.3 59.3 41.3 59.3
1.2 1.5 7649 1.05 775.08 47.4 60.7 47.4 60.7
1.3 1.6 7273 1.10 738.55 49.0 61.1 49.0 61.1
1.4 1.7 6555 1.25 669.67 51.6 61.9 51.6 61.9
1.5 1.8 6262 1.30 641.10 52.6 62.2 52.6 62.2
1.7 2.1 5366 1.50 553.91 55.3 63.2 55.3 63.2
FH104-11P-100L-06D 296 336
1.8 2.1 5272 1.55 545.32 55.5 63.3 55.5 63.3
2.0 2.5 4522 1.80 472.61 57.3 64.1 57.3 64.1
2.1 2.5 4390 1.85 459.75 57.5 64.3 57.5 64.3
2.4 2.9 3859 2.10 408.33 58.6 64.9 58.6 64.9
2.5 3.1 3557 2.25 378.74 59.1 65.2 59.1 65.2
2.8 3.4 3205 2.50 344.81 59.6 65.6 59.6 65.6
2.9 3.5 3037 2.65 328.77 59.9 65.8 59.9 65.8
1.8 2.1 5404 0.85 823.17 ** ** ** **
2.0 2.4 4810 0.95 735.68 25.8 38.6 25.8 38.6
2.3 2.8 4033 1.15 621.95 30.7 39.7 30.7 39.7
2.4 2.9 3896 1.20 602.09 31.4 39.8 31.4 39.8
2.9 3.5 3267 1.40 509.01 34.1 40.7 34.1 40.7
3.0 3.6 3127 1.45 488.23 34.7 40.9 34.7 40.9 FH094-11P-90S/L-04E 185 332
3.5 4.3 2611 1.75 412.76 36.3 41.5 36.3 41.5
3.6 4.3 2586 1.75 408.71 36.4 41.6 36.4 41.6
4.2 5.1 2154 2.10 345.53 37.5 42.1 37.5 42.1
4.4 5.3 2057 2.20 331.24 37.7 42.3 37.7 42.3
5.2 6.3 1707 2.65 280.04 38.4 42.7 38.4 42.7

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 241

 PN = 1.1 kW IE3
50 Hz 60 Hz at 50 Hz

1.1 kW 1.3 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
1.9 2.3 5054 0.90 509.01 23.8 38.3 23.8 38.3
2.0 2.4 4838 0.95 488.23 25.6 38.6 25.6 38.6
2.3 2.8 4057 1.15 412.76 30.6 39.6 30.6 39.6
FH094-11P-100L-06D 191 332
2.8 3.4 3368 1.35 345.53 33.7 40.5 33.7 40.5
2.9 3.5 3222 1.40 331.24 34.3 40.7 34.3 40.7
3.4 4.2 2691 1.70 280.04 36.1 41.4 36.1 41.4
5.0 6.1 2083 2.20 288.50 37.7 42.2 37.7 42.2
6.0 7.2 1761 2.60 243.90 38.3 42.7 38.3 42.7 FH093-11P-90S/L-04E 172 330
6.9 8.3 1524 3.00 211.14 38.7 43.0 38.7 43.0
3.3 4.0 3157 1.45 288.50 34.6 40.8 34.6 40.8
3.9 4.8 2669 1.70 243.90 36.2 41.5 36.2 41.5
F 4.5
5.1
5.5
6.2
2310
2046
1.95
2.20
211.14
186.99
37.1
37.8
41.9
42.3
37.1
37.8
41.9
42.3 FH093-11P-100L-06D 178 330
5.9 7.2 1770 2.55 161.76 38.3 42.7 38.3 42.7
6.7 8.2 1563 2.90 142.85 38.7 42.9 38.7 42.9
7.0 8.5 1506 3.00 137.63 38.8 43.0 38.8 43.0
2.4 2.9 3991 0.80 606.72 ** ** ** **
2.5 3.0 3896 0.80 592.20 ** ** ** **
2.8 3.4 3388 0.90 517.08 15.5 25.8 15.5 7.3
2.9 3.5 3321 0.95 507.90 16.3 27.5 16.3 7.4
3.0 3.7 3133 1.00 480.21 18.2 31.6 18.2 7.7
FH084-11P-90S/L-04E 130 328
3.5 4.2 2719 1.15 419.30 21.5 38.8 21.5 8.3
3.6 4.4 2601 1.20 401.99 22.3 40.6 22.3 8.5
4.1 5.0 2257 1.35 351.00 24.3 41.5 24.3 9.0
4.5 5.4 2087 1.45 325.80 25.1 41.8 25.1 9.3
5.1 6.2 1803 1.70 284.47 26.3 42.2 26.3 9.7
2.7 3.3 3485 0.90 351.00 14.3 23.2 14.3 7.1
2.9 3.6 3228 0.95 325.80 17.2 29.4 17.2 7.5 FH084-11P-100L-06D 136 328
3.4 4.1 2802 1.10 284.47 20.9 37.5 20.9 8.2
4.1 4.9 2588 1.20 358.52 22.4 40.8 22.4 8.5
5.1 6.2 2049 1.50 283.76 25.2 41.8 25.2 9.3
5.9 7.1 1789 1.70 247.77 26.3 42.2 26.3 9.7
6.6 8.0 1581 1.90 218.97 27.0 42.6 27.0 10.1
FH083-11P-90S/L-04E 117 326
7.9 9.5 1337 2.25 185.17 27.7 42.9 27.7 10.4
8.1 9.8 1302 2.35 180.28 27.8 43.0 27.8 10.5
9.1 11 1149 2.65 159.17 28.2 43.2 28.2 10.7
10 12 1030 2.95 142.69 28.4 43.4 27.5 10.9
2.7 3.2 3923 0.80 358.52 ** ** ** **
3.4 4.1 3105 1.00 283.76 18.4 32.0 18.4 7.7
3.9 4.7 2711 1.15 247.77 21.6 39.0 21.6 8.3
4.4 5.3 2396 1.30 218.97 23.5 41.3 23.5 8.8
5.2 6.3 2026 1.50 185.17 25.3 41.9 25.3 9.4
5.3 6.5 1973 1.55 180.28 25.6 42.0 25.6 9.5
6.0 7.3 1742 1.75 159.17 26.5 42.3 26.5 9.8
FH083-11P-100L-06D 123 326
6.7 8.2 1561 1.95 142.69 27.1 42.6 27.1 10.1
6.9 8.4 1520 2.00 138.95 27.2 42.7 27.2 10.2
7.7 9.4 1363 2.25 124.59 27.7 42.9 27.7 10.4
8.1 9.8 1303 2.35 119.05 27.8 43.0 27.8 10.5
8.7 11 1205 2.50 110.11 28.1 43.1 28.1 10.6
9.5 11 1109 2.75 101.32 28.3 43.3 28.1 10.8
10 13 1019 2.95 93.11 28.5 43.4 27.4 10.9
6.1 7.4 1712 0.90 237.15 13.7 15.5 13.7 4.3
7.5 9.0 1405 1.10 194.58 16.2 16.1 16.2 4.9
9.7 12 1088 1.40 150.69 18.1 16.8 18.1 5.5
FH073-11P-90S/L-04E 70 324
13 15 828 1.85 114.62 19.1 17.3 18.2 6.1
15 19 682 2.20 94.52 19.6 17.6 17.0 6.4
19 23 560 2.70 77.53 19.9 17.9 15.4 6.6
6.4 7.7 1649 0.95 150.69 14.3 15.6 14.3 4.4
8.4 10 1254 1.20 114.62 17.2 16.4 17.2 5.2
10 12 1034 1.50 94.52 18.3 16.9 18.3 5.6
FH073-11P-100L-06D 76 324
12 15 848 1.80 77.53 19.0 17.3 18.7 6.0
15 18 721 2.10 65.88 19.4 17.5 17.1 6.3
18 22 593 2.55 54.16 19.8 17.8 15.8 6.5

242 WG20 Gear Units and Geared Motors www.weg.net

PN = 1.1 kW IE3
50 Hz 60 Hz at 50 Hz

1.1 kW 1.3 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
11 14 940 0.90 130.15 6.9 10.8 6.9 2.3
12 15 862 1.00 119.35 8.0 12.4 8.0 2.5
15 18 710 1.20 98.34 9.7 13.0 9.7 3.0
16 20 651 1.30 90.17 10.2 13.1 10.2 3.2
18 22 581 1.45 80.48 10.7 13.4 10.7 3.4
FH063-11P-90S/L-04E 47 322
20 24 533 1.55 73.80 11.0 13.5 11.0 3.6
22 27 471 1.75 65.26 11.3 13.7 11.3 3.8
24 29 432 1.90 59.84 11.5 13.8 11.5 3.9
27 32 394 2.10 54.63 11.7 14.0 11.7 4.0
29 35 362 2.30 50.10 11.8 14.1 11.4 4.1
9.8 12 1076 0.80 98.34 ** ** ** **
11
12
13
14
987
881
0.85
0.95
90.17
80.48
**
7.8
**
12.4
**
7.8
**
2.5
F
13 16 808 1.05 73.80 8.7 12.6 8.7 2.7
FH063-11P-100L-06D 53 322
15 18 714 1.15 65.26 9.6 12.9 9.6 3.0
16 19 655 1.30 59.84 10.1 13.1 10.1 3.2
18 21 598 1.40 54.63 10.6 13.3 10.6 3.4
19 23 548 1.50 50.10 10.9 13.5 10.9 3.5
29 35 359 2.30 49.67 11.8 14.1 11.3 4.1
32 39 329 2.50 45.55 11.9 14.2 10.9 4.2
35 42 301 2.75 41.66 12.0 14.3 10.5 4.3 FH062-11P-90S/L-04E 46 322
38 46 276 3.00 38.20 12.1 14.3 10.1 4.4
71 86 148 2.90 20.49 12.4 14.6 8.0 4.6
19 23 544 1.55 49.67 10.9 13.5 10.9 3.5
21 26 498 1.65 45.55 11.2 13.6 11.2 3.7
23 28 456 1.80 41.66 11.4 13.8 11.4 3.8
25 30 418 2.00 38.20 11.6 13.9 11.6 3.9
FH062-11P-100L-06D 52 322
29 36 358 2.30 32.69 11.8 14.1 11.3 4.1
32 39 328 2.50 29.98 11.9 14.2 10.9 4.2
38 46 276 3.00 25.23 12.1 14.4 10.1 4.4
47 57 224 1.90 20.49 12.2 14.3 9.5 4.3
13 16 788 0.80 109.08 ** ** ** **
15 18 720 0.85 99.66 ** ** ** **
17 20 621 1.00 85.99 5.8 9.7 5.8 3.4
18 21 593 1.05 82.13 6.2 10.2 6.2 3.5 FH053-11P-90S/L-04E 31 320
19 23 542 1.15 75.04 6.9 10.3 6.9 3.6
24 29 435 1.40 60.26 8.0 10.7 8.0 4.0
26 32 398 1.55 55.06 8.3 10.8 8.3 4.1
20 25 516 1.00 71.46 7.2 10.4 7.2 3.7
22 27 471 1.00 65.29 7.7 10.5 7.7 3.8
26 31 407 1.50 56.42 8.3 10.8 8.3 4.1
28 34 372 1.65 51.55 8.5 10.8 8.5 4.1
33 40 316 1.90 43.75 8.9 11.0 8.9 4.3
36 44 289 2.10 39.97 9.0 11.1 9.0 4.4
FH052-11P-90S/L-04E 30 320
37 45 284 1.00 39.38 9.1 10.8 9.1 4.1
41 49 259 2.35 35.81 9.2 11.2 9.2 4.5
44 54 236 2.55 32.72 9.3 11.3 9.3 4.6
47 57 224 1.65 31.09 9.3 11.0 9.3 4.3
60 73 174 2.10 24.11 9.5 11.2 9.5 4.5
74 89 142 2.55 19.73 9.6 11.4 9.6 4.7
17 21 617 1.00 56.42 5.8 9.7 5.8 3.4
19 23 564 1.10 51.55 6.6 10.3 6.6 3.6
22 27 479 1.30 43.75 7.6 10.5 7.6 3.8
24 29 437 1.40 39.97 8.0 10.6 8.0 3.9
27 33 392 1.55 35.81 8.4 10.8 8.4 4.1
29 36 358 1.70 32.72 8.6 10.9 8.6 4.2
31 37 340 1.10 31.09 8.7 10.5 8.7 3.8
35 42 302 2.00 27.56 9.0 11.1 9.0 4.4 FH052-11P-100L-06D 36 320
38 46 276 2.20 25.18 9.1 11.1 9.1 4.4
40 48 264 1.40 24.11 9.2 10.9 9.2 4.2
46 56 228 2.65 20.83 9.3 11.3 9.3 4.6
49 59 216 1.70 19.73 9.4 11.1 9.4 4.4
50 61 208 2.90 19.03 9.4 11.4 9.4 4.7
63 77 166 2.20 15.19 9.5 11.3 9.5 4.6
84 101 126 2.90 11.48 9.6 11.5 9.1 4.8

www.weg.net WG20 Gear Units and Geared Motors 243

 PN = 1.1 kW IE3
50 Hz 60 Hz at 50 Hz

1.1 kW 1.3 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
20 25 514 0.80 71.24 ** ** ** **
22 27 469 0.90 64.98 1.2 0.7 1.2 0.7
FH043-11P-90S/L-04E 25 318
28 34 377 1.10 52.27 4.3 7.3 4.3 2.6
31 37 344 1.20 47.68 4.9 8.3 4.9 2.7
23 28 447 0.90 61.98 2.4 3.2 2.4 2.3
26 31 408 1.00 56.54 3.6 5.8 3.6 2.5
30 36 353 1.15 48.94 4.7 8.1 4.7 2.6
33 39 322 1.25 44.64 5.2 8.4 5.2 2.8
38 46 274 1.50 37.95 5.8 8.5 5.8 2.9
42 51 250 1.65 34.62 6.0 8.6 6.0 3.0
43 52 243 1.00 33.69 6.0 8.3 6.0 2.7
F 47
51
57
62
224
205
1.80
2.00
31.06
28.33
6.2
6.4
8.7
8.8
6.2
6.4
3.1
3.2
FH042-11P-90S/L-04E 25 318

55 66 192 1.65 26.60 6.4 8.5 6.4 2.9

61 74 173 2.35 23.91 6.6 8.9 6.6 3.3
67 81 157 2.55 21.81 6.6 8.9 6.6 3.3
71 85 149 2.10 20.63 6.7 8.7 6.7 3.1
86 104 122 2.55 16.88 6.8 8.9 6.8 3.3
22 26 488 0.85 44.64 ** ** ** **
25 31 415 1.00 37.95 3.4 5.3 3.4 2.4
28 34 379 1.10 34.62 4.3 7.3 4.3 2.6
31 38 340 1.20 31.06 4.9 8.3 4.9 2.7
34 41 310 1.30 28.33 5.3 8.4 5.3 2.8
36 44 291 1.10 26.60 5.6 8.0 5.6 2.4
40 49 262 1.55 23.91 5.9 8.6 5.9 3.0
44 53 239 1.70 21.81 6.1 8.7 6.1 3.1
47 56 226 1.40 20.63 6.2 8.4 6.2 2.8 FH042-11P-100L-06D 30 318
53 65 198 2.05 18.06 6.4 8.8 6.4 3.2
57 69 185 1.70 16.88 6.5 8.6 6.5 3.0
58 71 180 2.25 16.48 6.5 8.9 6.5 3.3
65 79 162 2.50 14.78 6.6 8.9 6.6 3.3
71 86 148 2.75 13.48 6.7 9.0 6.7 3.4
74 90 142 2.20 12.99 6.7 8.8 6.7 3.2
80 97 131 2.95 11.99 6.8 9.0 6.8 3.4
98 119 107 2.90 9.82 6.9 9.0 6.9 3.4
42 50 253 0.90 35.03 2.5 2.1 2.5 2.1
46 55 229 1.00 31.76 3.2 2.6 3.2 2.6
52 63 202 1.10 27.97 3.7 2.4 3.7 2.4
57 69 183 1.25 25.36 4.0 2.8 4.0 2.8
65 78 162 0.95 22.50 4.3 2.8 4.3 2.8
69 83 153 1.45 21.14 4.4 2.7 4.4 2.7
76 92 138 1.60 19.17 4.5 3.0 4.5 3.0
81 98 129 1.20 17.88 4.6 3.0 4.6 3.0 FH032-11P-90S/L-04E 23 316
91 110 116 1.90 16.06 4.7 2.9 4.7 2.9
100 121 105 2.10 14.57 4.8 3.2 4.8 3.2
105 127 100 1.55 13.81 4.8 3.1 4.8 3.1
116 141 90 2.45 12.50 4.9 3.1 4.9 3.1
128 155 82 2.70 11.33 4.9 3.3 4.9 3.3
132 160 80 1.90 11.03 5.0 3.2 5.0 3.2
175 211 60 2.50 8.33 5.0 3.3 5.0 3.3

Legend see page 211 ** ... on request

244 WG20 Gear Units and Geared Motors www.weg.net

 PN = 1.1 kW IE3
50 Hz 60 Hz at 50 Hz

1.1 kW 1.3 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
38 46 278 0.80 25.36 ** ** ** **
45 55 231 1.00 21.14 3.1 2.2 3.1 2.2
50 61 210 1.05 19.17 3.6 2.7 3.6 2.7
54 65 196 0.80 17.88 ** ** ** **
60 73 176 1.30 16.06 4.1 2.6 4.1 2.6
66 80 159 1.40 14.57 4.3 2.9 4.3 2.9
70 84 151 1.00 13.81 4.4 2.9 4.4 2.9
77 93 137 1.65 12.50 4.5 2.8 4.5 2.8
FH032-11P-100L-06D 29 316
85 103 124 1.80 11.33 4.7 3.1 4.7 3.1
87 106 121 1.25 11.03 4.7 3.0 4.7 3.0
98 119 107 2.00 9.76 4.8 3.0 4.8 3.0
108
115
132
140
97
91
2.10
1.65
8.85
8.33
4.9
4.9
3.2
3.2
4.9
4.9
3.2
3.2
F
152 184 69 2.10 6.33 5.0 3.3 5.0 3.3
195 236 54 2.40 4.93 5.1 3.4 5.1 3.4
249 303 42 2.65 3.85 4.9 3.4 4.9 3.4
66 80 158 0.85 21.89 ** ** ** **
74 89 142 0.95 19.70 4.6 2.1 4.6 2.1
77 93 136 1.00 18.88 4.7 1.9 4.7 1.9
86 104 123 1.10 17.00 4.8 2.2 4.8 2.2
88 107 119 1.10 16.48 4.8 2.0 4.8 2.0
98 119 107 1.25 14.84 4.9 2.3 4.9 2.3
119 144 88 1.00 12.19 5.0 2.4 5.0 2.4
FH022-11P-90S/L-04E 21 314
120 146 87 1.50 12.09 5.0 2.2 5.0 2.2
134 162 79 1.70 10.89 4.9 2.4 4.9 2.4
153 185 69 1.25 9.52 4.6 2.5 4.6 2.5
205 248 51 1.65 7.11 4.1 2.5 4.1 2.5
237 287 44 1.90 6.13 3.9 2.6 3.9 2.6
272 329 39 2.20 5.35 3.7 2.6 3.7 2.6
370 448 28 2.55 3.93 3.3 2.6 3.3 2.6

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 245

 PN = 1.5 kW IE3
50 Hz 60 Hz at 50 Hz

1.5 kW 1.8 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.53 0.65 23844 0.80 2711.35 ** ** ** **
0.54 0.66 23408 0.80 2661.75 ** ** ** **
FH155-11P-90S/L-04F 696 346
0.64 0.77 19808 0.95 2269.72 69.9 113.7 69.9 113.7
0.79 0.95 15890 1.15 1839.52 85.9 117.0 85.9 117.0
0.63 0.76 20782 0.90 2318.30 64.7 112.3 64.7 112.3
0.73 0.88 17790 1.05 1996.74 79.0 115.4 79.0 115.4
0.79 0.96 16281 1.15 1834.90 84.6 116.6 84.6 116.6
0.84 1.0 15293 1.20 1727.10 87.8 117.4 87.8 117.4
0.91 1.1 14129 1.30 1602.16 91.3 118.4 91.3 118.4
0.92 1.1 13937 1.30 1580.39 91.8 118.6 91.8 118.6
FH154-11P-90S/L-04F 683 344
1.0 1.2 12384 1.50 1415.96 95.7 119.8 95.7 119.8
F 1.1
1.2
1.3
1.4
12069
10557
1.50
1.75
1379.93
1219.56
96.4
99.5
120.1
121.3
96.4
99.5
120.1
121.3
1.4 1.7 9037 2.00 1054.87 102.1 122.6 102.1 122.6
1.6 2.0 7571 2.40 898.51 104.2 123.8 104.2 123.8
1.9 2.3 6399 2.85 773.88 105.6 124.7 105.6 124.7
0.81 0.99 16000 0.85 1781.14 ** ** ** **
0.84 1.0 15564 0.85 1732.67 ** ** ** **
0.93 1.1 13893 0.95 1552.98 67.3 84.1 67.3 84.1
0.97 1.2 13336 1.00 1493.78 69.3 84.6 69.3 84.6
1.1 1.3 11894 1.10 1337.70 73.9 86.0 73.9 86.0
1.2 1.5 10338 1.30 1172.32 77.9 87.5 77.9 87.5
1.3 1.5 10158 1.30 1151.94 78.3 87.7 78.3 87.7
1.4 1.7 8940 1.50 1022.15 80.9 88.9 80.9 88.9
1.5 1.8 8432 1.55 966.09 81.9 89.4 81.9 89.4 FH124-11P-90S/L-04F 431 340
1.6 1.9 7848 1.70 904.76 82.9 89.9 82.9 89.9
1.8 2.2 6772 1.95 788.86 84.6 91.0 84.6 91.0
1.9 2.3 6482 2.05 758.19 85.0 91.3 85.0 91.3
2.1 2.6 5749 2.30 679.51 86.0 92.0 86.0 92.0
2.2 2.7 5498 2.40 652.50 86.2 92.2 86.2 92.2
2.3 2.8 5352 2.45 636.55 86.4 92.3 86.4 92.3
2.5 3.0 4869 2.70 585.14 86.9 92.8 86.9 92.8
2.6 3.1 4657 2.80 562.05 87.1 93.0 87.1 93.0
1.3 1.5 10414 0.80 1156.94 ** ** ** **
1.4 1.7 9003 0.90 1004.29 40.4 59.1 40.4 59.1
1.6 2.0 7955 1.05 892.89 46.0 60.3 46.0 60.3
1.7 2.0 7731 1.05 867.71 47.0 60.6 47.0 60.6
1.9 2.3 6863 1.20 775.08 50.5 61.5 50.5 61.5
2.0 2.4 6526 1.25 738.55 51.7 61.9 51.7 61.9
2.2 2.6 5881 1.40 669.67 53.8 62.6 53.8 62.6
2.3 2.7 5619 1.45 641.10 54.6 62.9 54.6 62.9
FH104-11P-90S/L-04F 291 336
2.6 3.2 4805 1.70 553.91 56.6 63.8 56.6 63.8
2.7 3.2 4730 1.70 545.32 56.8 63.9 56.8 63.9
3.1 3.7 4049 2.00 472.61 58.2 64.7 58.2 64.7
3.2 3.8 3931 2.05 459.75 58.4 64.8 58.4 64.8
3.6 4.3 3448 2.35 408.33 59.3 65.3 59.3 65.3
3.8 4.6 3171 2.55 378.74 59.7 65.6 59.7 65.6
4.2 5.1 2857 2.80 344.81 60.1 66 60.1 66.0
4.4 5.3 2702 3.00 328.77 60.3 66.2 60.3 66.2
2.3 2.8 5587 0.85 621.95 ** ** ** **
2.4 2.9 5409 0.85 602.09 ** ** ** **
2.8 3.4 4544 1.00 509.01 27.7 39.0 27.7 39.0
3.0 3.6 4350 1.05 488.23 28.9 39.2 28.9 39.2
FH094-11P-90S/L-04F 186 332
3.5 4.3 3647 1.25 412.76 32.6 40.2 32.6 40.2
4.2 5.1 3022 1.50 345.53 35.0 41.0 35.0 41.0
4.4 5.3 2885 1.60 331.24 35.5 41.2 35.5 41.2
5.2 6.3 2409 1.90 280.04 36.9 41.8 36.9 41.8
5.0 6.1 2850 1.60 288.50 35.6 41.2 35.6 41.2
5.9 7.2 2410 1.90 243.90 36.9 41.8 36.9 41.8
6.9 8.3 2086 2.20 211.14 37.7 42.2 37.7 42.2 FH093-11P-90S/L-04F 173 330
7.8 9.4 1847 2.45 186.99 38.2 42.6 38.2 42.6
9.0 11 1598 2.85 161.76 38.6 42.9 38.6 42.9

Legend see page 211 ** ... on request

246 WG20 Gear Units and Geared Motors www.weg.net

 PN = 1.5 kW IE3
50 Hz 60 Hz at 50 Hz

1.5 kW 1.8 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
3.5 4.3 3698 0.85 411.63 ** ** ** **
3.6 4.4 3611 0.85 401.99 ** ** ** **
4.1 5.0 3134 1.00 351.00 18.2 31.6 18.2 7.7 FH084-11P-90S/L-04F 132 328
4.5 5.4 2903 1.05 325.80 20.2 35.9 20.2 8.0
5.1 6.2 2519 1.20 284.47 22.8 41.1 22.8 8.6
4.0 4.9 3542 0.85 358.52 ** ** ** **
5.1 6.2 2803 1.10 283.76 20.9 37.5 20.9 8.2
5.9 7.1 2448 1.25 247.77 23.2 41.2 23.2 8.7
6.6 8.0 2163 1.40 218.97 24.7 41.7 24.7 9.2
7.8 9.5 1829 1.65 185.17 26.2 42.2 26.2 9.7
8.0 9.7 1781 1.70 180.28 26.3 42.3 26.3 9.8 FH083-11P-90S/L-04F 119 326
9.1
10
11
13
1572
1373
1.95
2.20
159.17
138.95
27.0
27.6
42.6
42.9
27.0
27.6
10.1
10.4
F
12 14 1231 2.45 124.59 28.0 43.1 26.6 10.6
13 16 1088 2.80 110.11 28.3 43.3 25.6 10.8
14 17 1001 3.00 101.32 28.5 43.5 24.8 11.0
7.5 9 1922 0.80 194.58 ** ** ** **
9.6 12 1489 1.05 150.69 15.6 16.0 15.6 4.7
13 15 1132 1.35 114.62 17.8 16.7 17.8 5.4
15 19 934 1.65 94.52 18.7 17.1 17.8 5.8 FH073-11P-90S/L-04F 71 324
19 23 766 2.00 77.53 19.3 17.4 16.1 6.2
22 27 651 2.35 65.88 19.6 17.7 15.1 6.4
27 32 535 2.85 54.16 19.9 17.9 13.9 6.7
15 18 972 0.85 98.34 ** ** ** **
16 19 891 0.95 90.17 7.6 12.3 7.6 2.4
18 22 795 1.05 80.48 8.8 12.7 8.8 2.7
20 24 729 1.15 73.80 9.5 12.9 9.5 2.9
FH063-11P-90S/L-04F 48 322
22 27 645 1.30 65.26 10.2 13.2 10.2 3.2
24 29 591 1.40 59.84 10.6 13.3 10.6 3.4
27 32 540 1.55 54.63 10.9 13.5 10.9 3.6
29 35 495 1.70 50.10 11.2 13.6 11.2 3.7
29 35 491 1.70 49.67 11.2 13.7 11.2 3.7
32 39 450 1.85 45.55 11.4 13.8 11.4 3.8
35 42 412 2.00 41.66 11.6 13.9 11.0 4.0
38 46 377 2.20 38.20 11.8 14.0 10.6 4.1 FH062-11P-90S/L-04F 47 322
44 54 323 2.55 32.69 11.9 14.2 9.9 4.3
48 59 296 2.80 29.98 12.0 14.3 9.6 4.3
71 86 202 2.10 20.49 12.3 14.4 8.3 4.4
19 23 741 0.85 75.04 ** ** ** **
24 29 595 1.05 60.26 6.2 10.2 6.2 3.5 FH053-11P-90S/L-04F 32 320
26 32 544 1.10 55.06 6.9 10.3 6.9 3.6
26 31 557 1.10 56.42 6.7 10.3 6.7 3.6
28 34 509 1.20 51.55 7.3 10.4 7.3 3.7
33 40 432 1.40 43.75 8.1 10.7 8.1 4.0
36 44 395 1.55 39.97 8.4 10.8 8.4 4.1
40 49 354 1.70 35.81 8.7 10.9 8.7 4.2
44 54 323 1.85 32.72 8.8 11.0 8.8 4.3
47 56 307 1.20 31.09 8.9 10.7 8.9 4.0 FH052-11P-90S/L-04F 32 320
53 64 272 2.25 27.56 9.1 11.2 9.1 4.5
58 70 249 2.40 25.18 9.2 11.2 9.2 4.5
60 73 238 1.55 24.11 9.3 11.0 9.3 4.3
70 84 206 2.95 20.83 9.4 11.4 9.4 4.7
73 89 195 1.85 19.73 9.4 11.2 9.4 4.5
95 116 150 2.40 15.19 9.6 11.4 8.9 4.7
28 34 516 0.80 52.27 ** ** ** **
FH043-11P-90S/L-04F 26 318
30 37 471 0.85 47.68 ** ** ** **

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 247

 PN = 1.5 kW IE3
50 Hz 60 Hz at 50 Hz

1.5 kW 1.8 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
30 36 483 0.85 48.94 ** ** ** **
32 39 441 0.95 44.64 2.6 3.6 2.6 2.3
38 46 375 1.10 37.95 4.3 7.3 4.3 2.6
42 51 342 1.20 34.62 4.9 8.3 4.9 2.7
47 57 307 1.35 31.06 5.4 8.4 5.4 2.8
51 62 280 1.45 28.33 5.7 8.5 5.7 2.9
55 66 263 1.20 26.60 5.9 8.2 5.9 2.6
61 73 236 1.70 23.91 6.1 8.7 6.1 3.1 FH042-11P-90S/L-04F 26 318
66 80 215 1.90 21.81 6.3 8.7 6.3 3.1
70 85 204 1.55 20.63 6.4 8.5 6.4 2.9
80 97 178 2.25 18.06 6.5 8.9 6.5 3.3
F 86
88
104
106
167
163
1.85
2.50
16.88
16.48
6.6
6.6
8.7
8.9
6.6
6.6
3.1
3.3
98 119 146 2.75 14.78 6.7 9.0 6.7 3.4
112 135 128 2.45 12.99 6.8 8.9 6.8 3.3
52 63 276 0.80 27.97 ** ** ** **
57 69 251 0.90 25.36 2.6 2.5 2.6 2.5
69 83 209 1.10 21.14 3.6 2.4 3.6 2.4
76 92 189 1.20 19.17 3.9 2.8 3.9 2.8
81 98 177 0.85 17.88 ** ** ** **
90 109 159 1.40 16.06 4.3 2.7 4.3 2.7
100 120 144 1.55 14.57 4.5 3.0 4.5 3.0
105 127 136 1.10 13.81 4.5 3.0 4.5 3.0
116 140 123 1.80 12.50 4.7 2.9 4.7 2.9 FH032-11P-90S/L-04F 25 316
128 155 112 2.00 11.33 4.7 3.2 4.7 3.2
131 159 109 1.40 11.03 4.8 3.1 4.8 3.1
149 180 96 2.20 9.76 4.9 3.1 4.9 3.1
164 198 87 2.35 8.85 4.9 3.3 4.9 3.3
174 211 82 1.85 8.33 4.9 3.2 4.9 3.2
229 277 63 2.35 6.33 5.0 3.3 5.0 3.3
294 356 49 2.65 4.93 4.7 3.4 4.7 3.4
377 456 38 2.95 3.85 4.3 3.5 4.3 3.5
85 103 168 0.80 17.00 ** ** ** **
88 106 163 0.80 16.48 ** ** ** **
98 118 147 0.90 14.84 4.6 2.1 4.6 2.1
120 145 119 1.10 12.09 4.8 2.0 4.8 2.0
133 161 108 1.25 10.89 4.9 2.3 4.9 2.3
FH022-11P-90S/L-04F 22 314
152 184 94 0.90 9.52 4.8 2.3 4.8 2.3
204 247 70 1.20 7.11 4.3 2.4 4.3 2.4
237 286 61 1.40 6.13 4.0 2.5 4.0 2.5
271 328 53 1.60 5.35 3.8 2.5 3.8 2.5
369 447 39 1.90 3.93 3.4 2.6 3.4 2.6

Legend see page 211 ** ... on request

248 WG20 Gear Units and Geared Motors www.weg.net

PN = 2.2 kW IE3
50 Hz 60 Hz at 50 Hz

2.2 kW 2.6 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.81 0.98 23118 0.80 1773.82 ** ** ** ** FH155-11P-100L-04E 706 346
0.83 1.0 23039 0.80 1727.10 ** ** ** **
0.90 1.1 21329 0.85 1602.16 ** ** ** **
0.91 1.1 20996 0.90 1580.39 63.4 109.6 63.4 109.6
1.0 1.2 18735 1.00 1415.96 75.0 114.6 75.0 114.6
1.2 1.4 16037 1.15 1219.56 85.4 116.8 85.4 116.8
1.4 1.7 13758 1.35 1054.87 92.3 118.7 92.3 118.7
FH154-11P-100L-04E 693 344
1.6 1.9 11622 1.55 898.51 97.4 120.5 97.4 120.5
1.9 2.3 9887 1.85 773.88 100.7 121.9 100.7 121.9
2.1 2.6 8446 2.15 669.37 103.0 123.1 103.0 123.1
2.2 2.6 8349 2.20 663.03 103.2 123.1 103.2 123.1
2.5
2.6
3.0
3.2
7117
6834
2.55
2.65
573.49
553.01
104.8
105.1
124.2
124.4
104.8
105.1
124.2
124.4
F
1.2 1.5 15607 0.85 1172.32 ** ** ** **
1.3 1.6 14905 0.90 1121.89 63.4 83.1 63.4 83.1
1.4 1.7 13524 1.00 1022.15 68.7 84.5 68.7 84.5
1.5 1.8 12756 1.05 966.09 71.2 85.2 71.2 85.2
1.6 1.9 11922 1.10 904.76 73.8 86.0 73.8 86.0
1.8 2.2 10310 1.30 788.86 78.0 87.6 78.0 87.6
1.9 2.3 9888 1.35 758.19 79.0 88.0 79.0 88.0
2.1 2.6 8808 1.50 679.51 81.2 89.0 81.2 89.0
2.2 2.7 8440 1.55 652.50 81.9 89.4 81.9 89.4
FH124-11P-100L-04E 441 340
2.3 2.7 8217 1.60 636.55 82.3 89.6 82.3 89.6
2.5 3.0 7507 1.75 585.14 83.5 90.3 83.5 90.3
2.6 3.1 7181 1.85 562.05 84.0 90.6 84.0 90.6
3.0 3.6 6107 2.15 484.00 85.5 91.6 85.5 91.6
3.1 3.7 5854 2.25 465.86 85.8 91.9 85.8 91.9
3.2 3.9 5621 2.35 449.23 86.1 92.1 86.1 92.1
3.5 4.2 5142 2.55 414.33 86.6 92.5 86.6 92.5
3.7 4.5 4830 2.70 391.68 87.0 92.8 87.0 92.8
4.0 4.9 4345 3.00 356.79 87.4 93.3 87.4 93.3
1.9 2.3 10339 0.80 775.08 ** ** ** **
2.1 2.6 8897 0.90 669.67 41.0 59.3 41.0 59.3
2.2 2.7 8500 0.95 641.1 43.2 59.7 43.2 59.7
2.3 2.8 8312 1.00 628.21 44.2 59.9 44.2 59.9
2.6 3.2 7299 1.10 553.91 48.9 61.0 48.9 61.0
3.0 3.7 6176 1.30 472.61 52.9 62.3 52.9 62.3
3.1 3.8 5996 1.35 459.75 53.5 62.5 53.5 62.5
3.2 3.9 5770 1.40 443.33 54.1 62.7 54.1 62.7
FH104-11P-100L-04E 301 336
3.5 4.3 5282 1.55 408.33 55.5 63.3 55.5 63.3
3.6 4.4 5162 1.55 399.09 55.8 63.4 55.8 63.4
3.7 4.5 4957 1.65 384.84 56.3 63.7 56.3 63.7
3.8 4.6 4879 1.65 378.74 56.5 63.7 56.5 63.7
4.2 5.1 4405 1.85 344.81 57.5 64.3 57.5 64.3
4.3 5.2 4239 1.90 332.5 57.9 64.5 57.9 64.5
4.4 5.3 4183 1.95 328.77 58.0 64.5 58.0 64.5
5.1 6.1 3569 2.25 284.06 59.1 65.2 59.1 65.2
3.5 4.2 5495 0.85 412.76 ** ** ** **
4.2 5.1 4572 1.00 345.53 27.5 38.9 27.5 38.9
4.3 5.3 4374 1.05 331.24 28.7 39.2 28.7 39.2
FH094-11P-100L-04E 196 332
4.5 5.5 4209 1.10 319.41 29.7 39.4 29.7 39.4
5.1 6.2 3667 1.25 280.04 32.5 40.1 32.5 40.1
5.3 6.5 3529 1.30 270.03 33.1 40.3 33.1 40.3
5.0 6.0 4224 1.10 288.50 29.6 39.4 29.6 39.4
5.9 7.2 3571 1.30 243.90 32.9 40.3 32.9 40.3
6.8 8.3 3091 1.50 211.14 34.8 40.9 34.8 40.9
7.7 9.3 2738 1.65 186.99 36.0 41.4 36.0 41.4
8.9 11 2368 1.95 161.76 37.0 41.9 37.0 41.9 FH093-11P-100L-04E 183 330
9.2 11 2284 2.00 155.99 37.2 42.0 37.2 42.0
10 12 2091 2.20 142.85 37.7 42.2 37.7 42.2
12 14 1768 2.55 120.77 38.3 42.7 38.3 42.7
14 17 1531 2.95 104.54 38.7 43.0 38.7 43.0
5.0 6.1 3795 0.80 284.47 ** ** ** **
FH084-11P-100L-04E 142 328
5.2 6.4 3652 0.85 274.31 ** ** ** **

www.weg.net WG20 Gear Units and Geared Motors 249

 PN = 2.2 kW IE3
50 Hz 60 Hz at 50 Hz

2.2 kW 2.6 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
5.8 7.0 3628 0.85 247.77 ** ** ** **
6.6 8.0 3206 0.95 218.97 17.5 30.1 17.5 7.6
7.7 9.4 2711 1.15 185.17 21.6 39.0 21.6 8.3
8 9.7 2640 1.15 180.28 22.1 40.1 22.1 8.4
9 11 2330 1.30 159.17 23.9 41.4 23.9 8.9
10 12 2089 1.45 142.69 25.1 41.8 25.1 9.3
12 14 1824 1.65 124.59 26.2 42.2 26.2 9.7
FH083-11P-100L-04E 129 326
13 15 1681 1.80 114.80 26.7 42.4 26.7 9.9
14 17 1483 2.05 101.32 27.3 42.7 26.3 10.2
15 19 1363 2.25 93.11 27.7 42.9 25.4 10.4
17 21 1244 2.45 84.99 28.0 43.1 24.2 10.6
F 18
20
22
24
1172
1049
2.60
2.85
80.04
71.62
28.1
28.4
43.2
43.4
23.6
22.5
10.7
10.9
21 25 1023 2.85 69.87 28.5 43.4 22.1 10.9
13 15 1678 0.90 114.62 14.1 15.6 14.1 4.3
15 18 1384 1.10 94.52 16.4 16.2 16.4 4.9
19 23 1135 1.35 77.53 17.8 16.7 17.4 5.4
FH073-11P-100L-04E 81 324
22 26 965 1.60 65.88 18.6 17.0 16.2 5.8
26 32 793 1.90 54.16 19.2 17.4 14.9 6.1
27 33 765 2.00 52.23 19.3 17.4 14.6 6.2
32 39 659 2.30 45.02 19.6 17.7 13.6 6.4
37 44 576 2.65 39.31 19.8 17.8 12.8 6.6 FH072-11P-100L-04E 80 324
41 50 509 2.95 34.74 20.0 18.0 12.2 6.7
22 27 955 0.90 65.26 6.6 10.1 6.6 2.2
24 29 876 0.95 59.84 7.8 12.4 7.8 2.4
FH063-11P-100L-04E 58 322
26 32 800 1.05 54.63 8.8 12.7 8.8 2.7
29 35 734 1.15 50.1 9.5 12.8 9.5 2.9
29 35 727 1.15 49.67 9.5 12.9 9.5 2.9
32 38 667 1.25 45.55 10.0 13.1 10.0 3.1
34 42 610 1.35 41.66 10.5 13.3 10.5 3.3
38 46 559 1.50 38.20 10.8 13.4 10.8 3.5
44 53 479 1.75 32.69 11.3 13.7 10.6 3.8
48 58 439 1.90 29.98 11.5 13.8 10.2 3.9
57 69 369 2.25 25.23 11.8 14.1 9.4 4.1 FH062-11P-100L-04E 57 322
62 75 339 2.45 23.14 11.9 14.1 9.1 4.2
69 84 306 2.70 20.87 12.0 14.3 8.6 4.3
70 85 300 1.45 20.49 12.0 13.9 8.9 4.0
75 91 280 2.95 19.14 12.1 14.3 8.3 4.4
84 102 252 2.30 17.18 12.2 14.1 8.2 4.2
106 129 198 2.90 13.49 12.3 14.4 7.4 4.4
33 40 641 0.95 43.75 5.4 8.8 5.4 3.3
36 44 585 1.05 39.97 6.3 10.2 6.3 3.5
40 49 524 1.15 35.81 7.1 10.4 7.1 3.7
44 53 479 1.25 32.72 7.6 10.5 7.6 3.8
52 63 404 1.50 27.56 8.3 10.8 8.3 4.1
57 69 369 1.65 25.18 8.6 10.9 8.6 4.2
60 72 353 1.05 24.11 8.7 10.5 8.7 3.8
69 84 305 2.00 20.83 8.9 11.1 8.9 4.4
FH052-11P-100L-04E 42 320
73 88 289 1.25 19.73 9.0 10.7 9.0 4.0
75 92 279 2.15 19.03 9.1 11.1 9.1 4.4
84 102 249 2.45 17.04 9.2 11.2 9.2 4.5
92 112 228 2.65 15.57 9.3 11.3 9.3 4.6
94 115 222 1.65 15.19 9.3 11.0 9.3 4.3
104 126 202 3.00 13.82 9.4 11.4 8.9 4.7
125 152 168 2.15 11.48 9.5 11.3 8.3 4.6
153 186 137 2.65 9.39 9.6 11.4 7.7 4.7

Legend see page 211 ** ... on request

250 WG20 Gear Units and Geared Motors www.weg.net

 PN = 2.2 kW IE3
50 Hz 60 Hz at 50 Hz

2.2 kW 2.6 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
41 50 507 0.80 34.62 ** ** ** **
46 56 455 0.90 31.06 2.1 2.6 2.1 2.3
51 62 415 1.00 28.33 3.4 5.3 3.4 2.4
60 73 350 1.15 23.91 4.8 8.3 4.8 2.7
66 80 319 1.30 21.81 5.2 8.4 5.2 2.8
70 85 302 1.05 20.63 5.4 8.0 5.4 2.4
79 97 264 1.55 18.06 5.8 8.6 5.8 3.0
85 103 247 1.25 16.88 6.0 8.2 6.0 2.6
87 106 241 1.70 16.48 6.1 8.6 6.1 3.0
97 118 216 1.85 14.78 6.3 8.7 6.3 3.1
106 129 197 2.05 13.48 6.4 8.8 6.4 3.2
110
120
134
146
190
176
1.65
2.20
12.99
11.99
6.4
6.5
8.5
8.9
6.4
6.5
2.9
3.3
FH042-11P-100L-04E 36 318 F
131 160 160 2.30 10.93 6.6 8.9 6.6 3.3
143 174 147 2.40 10.03 6.7 9.0 6.5 3.4
146 178 144 2.15 9.82 6.7 8.8 6.5 3.2
157 191 134 2.45 9.15 6.7 9.0 6.3 3.4
177 215 119 2.65 8.13 6.8 9.1 6.0 3.5
179 217 118 2.40 8.03 6.8 8.9 6.0 3.3
183 223 115 2.65 7.84 6.8 9.1 5.9 3.5
193 235 109 2.70 7.42 6.8 9.1 5.7 3.5
201 244 105 2.75 7.15 6.9 9.1 5.7 3.5
220 268 95 2.60 6.52 6.9 9.0 5.5 3.4
263 320 80 2.80 5.45 6.9 9.1 5.1 3.5
75 91 281 0.80 19.17 ** ** ** **
89 109 235 0.95 16.06 3.0 2.2 3.0 2.2
98 120 213 1.05 14.57 3.5 2.7 3.5 2.7
115 140 183 1.25 12.5 4.0 2.5 4.0 2.5
127 154 166 1.35 11.33 4.2 2.9 4.2 2.9
130 158 161 0.95 11.03 4.3 2.8 4.3 2.8
FH032-11P-100L-04E 35 316
147 179 143 1.50 9.76 4.5 2.8 4.5 2.8
162 197 130 1.60 8.85 4.6 3.1 4.6 3.1
172 209 122 1.25 8.33 4.7 3.0 4.7 3.0
227 276 93 1.60 6.33 4.9 3.2 4.9 3.2
291 354 72 1.80 4.93 4.8 3.3 4.8 3.3
373 453 56 2.00 3.85 4.4 3.4 4.4 3.4

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 251

 PN = 3.0 kW IE3
50 Hz 60 Hz at 50 Hz

3.0 kW 3.6 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
1.2 1.4 22062 0.85 1219.56 ** ** ** **
1.4 1.6 19005 0.95 1054.87 73.8 114.4 73.8 114.4
1.6 1.9 16056 1.15 898.51 85.4 116.8 85.4 116.8
1.9 2.2 13715 1.35 773.88 92.4 118.7 92.4 118.7
2.2 2.6 11766 1.55 669.37 97.0 120.3 97.0 120.3
2.3 2.7 11192 1.65 639.35 98.3 120.8 98.3 120.8
FH154-11P-L100L-04F 700 344
2.5 3.0 9956 1.85 573.49 100.6 121.8 100.6 121.8
2.6 3.1 9797 1.85 564.30 100.9 122.0 100.9 122.0
3.0 3.6 8352 2.20 488.09 103.2 123.1 103.2 123.1
3.1 3.8 7892 2.30 463.14 103.8 123.5 103.8 123.5
3.5 4.2 6876 2.65 409.44 105.1 124.4 105.1 124.4
F 3.6
1.6
4.4
1.9
6685
16401
2.70
0.80
398.90
904.76
105.3
**
124.5
**
105.3
**
124.5
**
1.8 2.2 14213 0.95 788.86 66.2 83.8 66.2 83.8
1.9 2.3 13632 1.00 758.19 68.3 84.4 68.3 84.4
2.1 2.6 12167 1.10 679.51 73.1 85.8 73.1 85.8
2.2 2.7 11660 1.15 652.5 74.5 86.3 74.5 86.3
2.3 2.7 11375 1.15 636.55 75.3 86.5 75.3 86.5
2.5 3.0 10413 1.25 585.14 77.7 87.5 77.7 87.5
2.6 3.1 9961 1.35 562.05 78.8 87.9 78.8 87.9
3.0 3.6 8507 1.55 484.00 81.8 89.3 81.8 89.3
3.1 3.7 8172 1.60 465.86 82.4 89.6 82.4 89.6 FH124-11P-L100L-04F 448 340
3.2 3.9 7848 1.70 449.23 82.9 89.9 82.9 89.9
3.5 4.2 7193 1.85 414.33 84.0 90.6 84.0 90.6
3.7 4.4 6772 1.95 391.68 84.6 91.0 84.6 91.0
3.8 4.5 6621 2.00 383.78 84.8 91.1 84.8 91.1
4.0 4.9 6118 2.15 356.79 85.5 91.6 85.5 91.6
4.1 5.0 5987 2.20 349.88 85.7 91.7 85.7 91.7
4.3 5.2 5749 2.30 337.39 86.0 92.0 86.0 92.0
4.8 5.8 5070 2.60 301.29 86.7 92.6 86.7 92.6
5.0 6.0 4869 2.70 290.53 86.9 92.8 86.9 92.8
2.6 3.1 10041 0.80 553.91 ** ** ** **
3.0 3.7 8515 0.95 472.61 43.2 59.7 43.2 59.7
3.1 3.7 8488 0.95 471.15 43.3 59.7 43.3 59.7
3.2 3.9 7955 1.05 443.33 46.0 60.3 46.0 60.3
3.5 4.3 7312 1.10 408.33 48.8 61.0 48.8 61.0
3.6 4.4 7131 1.15 399.09 49.5 61.2 49.5 61.2
FH104-11P-L100L-04F 308 336
3.7 4.5 6863 1.20 384.84 50.5 61.5 50.5 61.5
3.8 4.6 6754 1.20 378.74 50.9 61.7 50.9 61.7
4.2 5.0 6111 1.35 344.81 53.1 62.4 53.1 62.4
4.3 5.2 5881 1.40 332.50 53.8 62.6 53.8 62.6
4.4 5.3 5815 1.40 328.77 54.0 62.7 54.0 62.7
5.1 6.1 4972 1.65 284.06 56.2 63.6 56.2 63.6
4.5 5.4 5790 0.80 319.41 ** ** ** **
5.1 6.2 5056 0.90 280.04 23.8 38.3 23.8 38.3 FH094-11P-L100L-04F 203 332
5.3 6.4 4865 0.95 270.03 25.4 38.6 25.4 38.6
5.0 6.0 5740 0.80 288.50 ** ** ** **
5.9 7.1 4853 0.95 243.90 25.5 38.6 25.5 38.6
6.8 8.2 4201 1.10 211.14 29.8 39.4 29.8 39.4
7.7 9.3 3720 1.25 186.99 32.2 40.1 32.2 40.1
8.9 11 3218 1.40 161.76 34.3 40.7 34.3 40.7
9.2 11 3104 1.45 155.99 34.7 40.9 34.7 40.9
FH093-11P-L100L-04F 190 330
10 12 2842 1.60 142.85 35.6 41.2 35.6 41.2
12 14 2403 1.90 120.77 36.9 41.8 36.9 41.8
14 17 2080 2.20 104.54 37.7 42.2 37.7 42.2
16 19 1842 2.45 92.59 38.2 42.6 38.2 42.6
18 22 1593 2.85 80.09 38.6 42.9 38.6 42.9
19 23 1537 2.95 77.23 38.7 43.0 38.7 43.0

Legend see page 211 ** ... on request

252 WG20 Gear Units and Geared Motors www.weg.net

 PN = 3.0 kW IE3
50 Hz 60 Hz at 50 Hz

3.0 kW 3.6 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
7.8 9.4 3684 0.85 185.17 ** ** ** **
8 9.7 3587 0.85 180.28 ** ** ** **
9 11 3167 0.95 159.17 17.9 30.9 17.9 7.6
10 12 2839 1.10 142.69 20.7 37.0 20.7 8.1
12 14 2479 1.25 124.59 23.0 41.2 23.0 8.7
13 15 2284 1.35 114.80 24.1 41.5 24.1 9.0
14 17 2016 1.50 101.32 25.4 41.9 25.4 9.4
15 19 1853 1.65 93.11 26.1 42.1 26.1 9.6
FH083-11P-L100L-04F 135 326
17 20 1691 1.80 84.99 26.7 42.4 25.5 9.9
18 22 1592 1.90 80.04 27.0 42.5 24.8 10.0
20 24 1425 2.10 71.62 27.5 42.8 23.6 10.3
21
24
25
29
1390
1191
2.10
2.35
69.87
59.86
27.6
28.1
42.9
43.2
23.2
21.8
10.4
10.7
F
25 30 1149 2.40 57.73 28.2 43.2 21.4 10.7
28 34 1014 2.65 50.95 28.5 43.4 20.3 10.9
34 41 850 2.95 42.74 28.8 43.7 18.8 11.2
15 18 1881 0.80 94.52 ** ** ** **
19 22 1543 1.00 77.53 15.2 15.9 15.2 4.6
22 26 1311 1.15 65.88 16.8 16.3 16.8 5.1 FH073-11P-L100L-04F 88 324
27 32 1078 1.40 54.16 18.1 16.8 15.7 5.6
28 33 1039 1.45 52.23 18.3 16.9 15.4 5.6
32 39 896 1.70 45.02 18.9 17.2 14.4 5.9
37 44 782 1.95 39.31 19.3 17.4 13.5 6.2
41 50 691 2.20 34.74 19.5 17.6 12.8 6.3
FH072-11P-L100L-04F 87 324
49 59 585 2.60 29.38 19.8 17.8 11.9 6.6
57 69 502 3.00 25.25 20.0 18.0 11.1 6.7
69 84 412 2.30 20.72 20.1 17.8 10.4 6.5
26 32 1087 0.80 54.63 ** ** ** **
FH063-11P-L100L-04F 65 322
29 35 997 0.85 50.10 ** ** ** **
29 35 988 0.85 49.67 ** ** ** **
32 38 906 0.95 45.55 7.4 11.8 7.4 2.3
35 42 829 1.00 41.66 8.4 12.6 8.4 2.6
38 46 760 1.10 38.20 9.2 12.8 9.2 2.8
44 53 650 1.30 32.69 10.2 13.1 10.2 3.2
48 58 596 1.40 29.98 10.6 13.3 10.6 3.3
57 69 502 1.65 25.23 11.2 13.6 10.0 3.7
62 75 460 1.80 23.14 11.4 13.7 9.6 3.8
69 83 415 2.00 20.87 11.6 13.9 9.1 4.0
FH062-11P-L100L-04F 64 322
70 85 408 1.05 20.49 11.6 13.4 9.4 3.5
75 91 381 2.20 19.14 11.7 14.0 8.8 4.1
81 98 353 2.35 17.75 11.8 14.1 8.5 4.2
84 101 342 1.70 17.18 11.9 13.7 8.6 3.8
88 107 324 2.55 16.28 11.9 14.2 8.2 4.2
94 113 306 2.70 15.38 12.0 14.3 7.9 4.3
102 123 281 2.95 14.11 12.1 14.3 7.7 4.4
107 129 268 2.15 13.49 12.1 14.1 7.7 4.1
138 167 207 2.80 10.41 12.3 14.3 6.9 4.4

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 253

 PN = 3.0 kW IE3
50 Hz 60 Hz at 50 Hz

3.0 kW 3.6 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
36 44 795 0.80 39.97 ** ** ** **
40 49 712 0.85 35.81 ** ** ** **
44 53 651 0.95 32.72 5.2 8.4 5.2 3.3
52 63 548 1.10 27.56 6.8 10.3 6.8 3.6
57 69 501 1.20 25.18 7.4 10.5 7.4 3.8
60 72 480 0.80 24.11 ** ** ** **
69 84 414 1.45 20.83 8.2 10.7 8.2 4.0
73 88 393 0.95 19.73 8.4 10.3 8.4 3.6
76 91 379 1.60 19.03 8.5 10.8 8.5 4.1
85 102 339 1.80 17.04 8.7 11.0 8.7 4.3
FH052-11P-L100L-04F 48 320
92 112 310 1.95 15.57 8.9 11.0 8.9 4.3
F 95
104
115
126
302
275
1.20
2.20
15.19
13.82
9.0
9.1
10.7
11.2
9.0
9.1
4.0
4.5
114 138 251 2.40 12.63 9.2 11.2 8.9 4.5
124 150 230 2.65 11.57 9.3 11.3 8.6 4.6
125 152 228 1.60 11.48 9.3 11.0 8.7 4.3
136 165 210 2.80 10.57 9.4 11.4 8.3 4.7
153 185 187 1.95 9.39 9.5 11.2 7.9 4.5
189 228 152 2.40 7.62 9.6 11.3 7.3 4.6
226 273 127 2.85 6.38 9.4 11.5 6.8 4.8
60 73 476 0.85 23.91 ** ** ** **
66 80 434 0.95 21.81 2.9 4.3 2.9 2.4
70 84 410 0.80 20.63 ** ** ** **
80 96 359 1.15 18.06 4.6 7.9 4.6 2.6
85 103 336 0.95 16.88 5.0 7.8 5.0 2.2
87 106 328 1.25 16.48 5.1 8.3 5.1 2.7
97 118 294 1.40 14.78 5.5 8.5 5.5 2.9
107 129 268 1.50 13.48 5.8 8.6 5.8 3.0
111 134 258 1.20 12.99 5.9 8.2 5.9 2.6
120 145 239 1.65 11.99 6.1 8.6 6.1 3.0
132 159 217 1.70 10.93 6.3 8.7 6.3 3.1
144 173 200 1.75 10.03 6.4 8.8 6.4 3.2 FH042-11P-L100L-04F 42 318
147 177 195 1.60 9.82 6.4 8.5 6.4 2.9
157 190 182 1.80 9.15 6.5 8.9 6.5 3.3
177 214 162 1.95 8.13 6.6 8.9 6.2 3.3
179 217 160 1.80 8.03 6.6 8.7 6.3 3.1
184 222 156 1.95 7.84 6.6 8.9 6.1 3.3
194 235 148 2.00 7.42 6.7 9.0 6.0 3.4
201 243 142 2.05 7.15 6.7 9.0 5.9 3.4
221 267 130 1.95 6.52 6.8 8.8 5.7 3.2
264 319 108 2.05 5.45 6.8 9.0 5.3 3.4
326 394 88 2.25 4.42 6.6 9.1 4.9 3.5
338 408 85 2.30 4.26 6.6 9.1 4.8 3.5
99 119 290 0.80 14.57 ** ** ** **
115 139 249 0.90 12.50 2.7 2.1 2.7 2.1
127 154 225 1.00 11.33 3.2 2.6 3.2 2.6
148 178 194 1.10 9.76 3.8 2.5 3.8 2.5
163 197 176 1.15 8.85 4.1 2.9 4.1 2.9 FH032-11P-L100L-04F 41 316
173 209 166 0.95 8.33 4.2 2.8 4.2 2.8
227 275 126 1.20 6.33 4.6 3.0 4.6 3.0
292 353 98 1.30 4.93 4.8 3.2 4.8 3.2
374 452 77 1.45 3.85 4.5 3.3 4.5 3.3

Legend see page 211 ** ... on request

254 WG20 Gear Units and Geared Motors www.weg.net

 PN = 4.0 kW IE3
50 Hz 60 Hz at 50 Hz

4.0 kW 4.8 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
1.6 2.0 21523 0.85 898.51 ** ** ** **
1.9 2.3 18424 1.00 773.88 76.4 114.9 76.4 114.9
2.0 2.4 17636 1.05 742.31 79.6 115.5 79.6 115.5
2.2 2.6 15838 1.15 669.37 86.1 117.0 86.1 117.0
2.3 2.7 15097 1.20 639.35 88.4 117.6 88.4 117.6
2.5 3.1 13458 1.35 573.49 93.0 119.0 93.0 119.0
FH154-11P-112M-04E 701 344
2.6 3.1 13215 1.40 564.30 93.7 119.2 93.7 119.2
3.0 3.6 11337 1.60 488.09 98.0 120.7 98.0 120.7
3.1 3.7 10972 1.65 473.37 98.7 121.0 98.7 121.0
3.5 4.3 9373 1.95 409.44 101.6 122.3 101.6 122.3
3.6 4.4 9113 2.00 398.90 102.0 122.5 102.0 122.5
4.2
2.1
5.1
2.6
7769
16311
2.35
0.80
345.03
679.51
104.0
**
123.6
**
104.0
**
123.6
**
F
2.2 2.7 15630 0.85 652.50 ** ** ** **
2.3 2.8 15217 0.90 636.55 62.0 82.8 62.0 82.8
2.5 3.0 13959 0.95 585.14 67.1 84.0 67.1 84.0
2.6 3.1 13381 1.00 562.05 69.2 84.6 69.2 84.6
3.0 3.6 11452 1.15 484.00 75.1 86.5 75.1 86.5
3.1 3.8 11000 1.20 465.86 76.3 86.9 76.3 86.9
3.2 3.9 10586 1.25 449.23 77.3 87.3 77.3 87.3
3.5 4.2 9723 1.35 414.33 79.3 88.1 79.3 88.1 FH124-11P-112M-04E 449 340
3.6 4.3 9513 1.40 406.19 79.8 88.3 79.8 88.3
3.7 4.5 9154 1.45 391.68 80.5 88.7 80.5 88.7
3.8 4.6 8969 1.45 383.78 80.9 88.9 80.9 88.9
4.1 4.9 8287 1.60 356.79 82.2 89.5 82.2 89.5
4.3 5.2 7804 1.70 337.39 83.0 90.0 83.0 90.0
4.8 5.8 6912 1.90 301.29 84.4 90.8 84.4 90.8
5.0 6.0 6637 2.00 290.53 84.8 91.1 84.8 91.1
5.8 7.1 5589 2.35 248.21 86.1 92.1 86.1 92.1
6.6 8.0 5814 2.25 220.67 85.9 91.9 85.9 91.9
7.5 9.1 5069 2.60 192.40 86.7 92.6 86.7 92.6
FH123-11P-112M-04E 425 338
7.8 9.5 4888 2.70 185.53 86.9 92.8 86.9 92.8
8.7 11 4366 3.00 165.73 87.4 93.3 87.4 93.3
3.3 4.0 10641 0.80 443.33 ** ** ** **
3.6 4.3 9781 0.85 408.33 ** ** ** **
3.8 4.6 9200 0.90 384.84 39.2 58.9 39.2 58.9
FH104-11P-112M-04E 309 336
4.2 5.1 8209 1.00 344.81 44.7 60.0 44.7 60.0
4.4 5.3 7900 1.05 332.50 46.2 60.4 46.2 60.4
5.1 6.2 6707 1.20 284.06 51.1 61.7 51.1 61.7
5.9 7.1 6496 1.25 246.57 51.8 61.9 51.8 61.9
6.7 8.1 5737 1.40 217.78 54.2 62.8 54.2 62.8
7.7 9.3 4980 1.65 189.04 56.2 63.6 56.2 63.6
8.0 9.6 4802 1.70 182.29 56.6 63.8 56.6 63.8
FH103-11P-112M-04E 285 334
8.9 11 4303 1.90 163.33 57.7 64.4 57.7 64.4
10 13 3682 2.20 139.78 58.9 65.1 58.9 65.1
12 14 3229 2.50 122.58 59.6 65.6 59.6 65.6
13 16 2852 2.85 108.27 60.1 66.0 60.1 66.0
6.9 8.3 5562 0.85 211.14 ** ** ** **
7.8 9.4 4926 0.95 186.99 24.9 38.5 24.9 38.5
9.0 11 4262 1.10 161.76 29.4 39.4 29.4 39.4
9.3 11 4110 1.10 155.99 30.3 39.6 30.3 39.6
10 12 3763 1.20 142.85 32.0 40.0 32.0 40.0
11 13 3626 1.25 137.63 32.7 40.2 32.7 40.2
12 15 3182 1.45 120.77 34.5 40.8 34.5 40.8 FH093-11P-112M-04E 191 330
14 17 2754 1.65 104.54 35.9 41.4 35.9 41.4
16 19 2439 1.85 92.59 36.8 41.8 36.8 41.8
18 22 2110 2.15 80.09 37.6 42.2 37.6 42.2
19 23 2035 2.25 77.23 37.8 42.3 37.8 42.3
21 26 1795 2.55 68.15 38.3 42.6 38.3 42.6
25 30 1528 2.95 57.99 38.7 43.0 38.7 43.0

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 255

 PN = 4.0 kW IE3
50 Hz 60 Hz at 50 Hz

4.0 kW 4.8 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
10 12 3759 0.80 142.69 ** ** ** **
12 14 3282 0.95 124.59 16.7 28.3 16.7 7.4
13 15 3024 1.00 114.80 19.2 33.7 19.2 7.8
14 17 2669 1.15 101.32 21.9 39.7 21.9 8.4
16 19 2453 1.25 93.11 23.2 41.2 23.2 8.7
17 21 2239 1.35 84.99 24.4 41.5 24.4 9.0
18 22 2109 1.45 80.04 25.0 41.7 25.0 9.2
FH083-11P-112M-04E 136 326
20 25 1887 1.60 71.62 25.9 42.1 25.0 9.6
21 25 1841 1.60 69.87 26.1 42.2 24.6 9.7
24 29 1577 1.80 59.86 27.0 42.6 23.0 10.1
25 30 1521 1.85 57.73 27.2 42.7 22.6 10.2
F 28
34
34
41
1342
1126
2.00
2.25
50.95
42.74
27.7
28.2
42.9
43.3
21.3
19.6
10.4
10.8
40 49 949 2.55 36.02 28.6 43.5 18.2 11.0
22 27 1736 0.90 65.88 13.5 15.5 13.5 4.2
27 32 1427 1.10 54.16 16.1 16.1 16.1 4.8 FH073-11P-112M-04E 89 324
28 34 1376 1.10 52.23 16.4 16.2 16.4 4.9
32 39 1186 1.30 45.02 17.6 16.6 15.4 5.3
37 45 1036 1.45 39.31 18.3 16.9 14.3 5.6
42 51 915 1.65 34.74 18.8 17.1 13.5 5.9
49 60 774 1.95 29.38 19.3 17.4 12.5 6.2
57 70 665 2.30 25.25 19.6 17.6 11.6 6.4 FH072-11P-112M-04E 88 324
66 80 581 2.60 22.05 19.8 17.8 10.9 6.6
70 85 546 1.75 20.72 19.9 17.4 10.9 6.1
80 97 477 2.35 18.09 20.0 17.6 10.2 6.3
91 110 421 2.60 15.99 20.1 17.8 9.7 6.5
38 46 1006 0.85 38.20 ** ** ** **
44 54 861 1.00 32.69 8.0 12.5 8.0 2.5
48 59 790 1.05 29.98 8.9 12.7 8.9 2.7
57 70 665 1.25 25.23 10.1 13.1 10.1 3.2
63 76 610 1.35 23.14 10.5 13.3 10.2 3.3
69 84 550 1.50 20.87 10.9 13.5 9.7 3.5
71 86 540 0.80 20.49 ** ** ** **
76 92 504 1.65 19.14 11.2 13.6 9.3 3.6
82 99 468 1.80 17.75 11.3 13.7 8.9 3.8
84 102 453 1.30 17.18 11.4 13.2 9.2 3.3
89 108 429 1.95 16.28 11.5 13.8 8.6 3.9
FH062-11P-112M-04E 65 322
94 114 405 2.05 15.38 11.6 13.9 8.4 4.0
103 124 372 2.25 14.11 11.8 14.0 8.0 4.1
107 130 355 1.65 13.49 11.8 13.7 8.2 3.7
112 135 342 2.40 12.99 11.9 14.1 7.7 4.2
116 140 330 2.50 12.53 11.9 14.2 7.6 4.2
122 147 314 2.65 11.91 12.0 14.2 7.4 4.3
126 153 303 2.75 11.49 12.0 14.3 7.3 4.3
136 164 282 2.95 10.70 12.1 14.3 7.1 4.4
139 169 274 2.10 10.41 12.1 14.0 7.2 4.1
168 204 227 2.55 8.61 12.2 14.2 6.6 4.3
198 240 193 3.00 7.32 12.3 14.4 6.2 4.4

Legend see page 211 ** ... on request

256 WG20 Gear Units and Geared Motors www.weg.net

 PN = 4.0 kW IE3
50 Hz 60 Hz at 50 Hz

4.0 kW 4.8 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
53 64 726 0.85 27.56 ** ** ** **
58 70 663 0.90 25.18 4.9 7.7 4.9 3.2
70 84 549 1.10 20.83 6.8 10.3 6.8 3.6
76 92 501 1.20 19.03 7.4 10.5 7.4 3.8
85 103 449 1.35 17.04 7.9 10.6 7.9 3.9
93 113 410 1.50 15.57 8.2 10.7 8.2 4.0
95 116 400 0.90 15.19 8.3 10.3 8.3 3.6
105 127 364 1.65 13.82 8.6 10.9 8.6 4.2
115 139 333 1.80 12.63 8.8 11.0 8.8 4.3
125 152 305 2.00 11.57 8.9 11.1 8.9 4.4
126 153 302 1.20 11.48 9.0 10.7 9.0 4.0 FH052-11P-112M-04E 49 320
137
154
166
187
278
247
2.10
1.50
10.57
9.39
9.1
9.2
11.1
10.9
8.6
8.3
4.4
4.2
F
155 187 247 2.30 9.38 9.2 11.2 8.2 4.5
160 194 238 2.35 9.04 9.3 11.3 8.0 4.6
169 205 226 2.45 8.57 9.3 11.3 7.9 4.6
176 212 218 2.50 8.26 9.3 11.3 7.7 4.6
190 230 201 1.80 7.62 9.4 11.1 7.5 4.4
227 275 168 2.15 6.38 9.5 11.3 7.0 4.6
280 339 136 2.65 5.17 8.8 11.4 6.4 4.7
291 352 131 2.75 4.98 8.7 11.4 6.3 4.7

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 257

 PN = 5.5 kW IE3
50 Hz 60 Hz at 50 Hz

5.5 kW 6.6 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
2.2 2.6 21821 0.85 669.37 ** ** ** **
2.3 2.8 20800 0.90 639.35 64.6 112.1 64.6 112.1
2.6 3.1 18581 1.00 573.49 75.7 114.8 75.7 114.8
2.7 3.2 17771 1.05 549.60 79.1 115.4 79.1 115.4
3.0 3.6 15717 1.15 488.09 86.5 117.1 86.5 117.1
FH154-11P-132S-04E 719 344
3.1 3.7 15212 1.20 473.37 88.1 117.5 88.1 117.5
3.2 3.8 14852 1.25 463.14 89.2 117.8 89.2 117.8
3.6 4.3 13050 1.40 409.44 94.1 119.3 94.1 119.3
3.7 4.4 12687 1.45 398.90 95.0 119.6 95.0 119.6
4.2 5.1 10861 1.70 345.03 98.9 121.1 98.9 121.1
3.0 3.6 15778 0.85 484.00 ** ** ** **
F 3.1
3.3
3.7
3.9
15585
14615
0.85
0.90
478.08
449.23
**
64.6
**
83.4
**
64.6
**
83.4
3.5 4.3 13424 1.00 414.33 69.0 84.6 69.0 84.6
3.6 4.3 13339 1.00 411.69 69.3 84.6 69.3 84.6
3.7 4.5 12664 1.05 391.68 71.5 85.3 71.5 85.3
3.8 4.6 12409 1.05 383.78 72.3 85.5 72.3 85.5
4.1 4.9 11489 1.15 356.79 75.0 86.4 75.0 86.4 FH124-11P-132S-04E 467 340
4.2 5.0 11243 1.20 349.88 75.7 86.7 75.7 86.7
4.3 5.2 10842 1.20 337.39 76.7 87.1 76.7 87.1
4.4 5.3 10731 1.25 334.62 77.0 87.2 77.0 87.2
4.9 5.9 9603 1.40 301.29 79.6 88.2 79.6 88.2
5.0 6.1 9241 1.45 290.53 80.3 88.6 80.3 88.6
5.1 6.1 9167 1.45 288.23 80.5 88.7 80.5 88.7
5.9 7.1 7814 1.70 248.21 83.0 90.0 83.0 90.0
6.6 8.0 7912 1.65 220.67 82.8 89.9 82.8 89.9
7.6 9.2 6898 1.90 192.4 84.4 90.9 84.4 90.9
7.9 9.5 6652 2.00 185.53 84.8 91.1 84.8 91.1
FH123-11P-132S-04E 443 338
8.8 11 5942 2.20 165.73 85.7 91.8 85.7 91.8
10 12 5117 2.55 142.72 86.7 92.6 86.7 92.6
12 14 4470 2.95 124.67 87.3 93.2 87.3 93.2
5.2 6.2 9241 0.90 284.06 38.9 58.9 38.9 58.9 FH104-11P-132S-04E 327 336
5.9 7.2 8840 0.95 246.57 41.3 59.3 41.3 59.3
6.7 8.1 7808 1.05 217.78 46.7 60.5 46.7 60.5
7.7 9.3 6778 1.20 189.04 50.9 61.6 50.9 61.6
8.0 9.7 6536 1.25 182.29 51.7 61.9 51.7 61.9
9.0 11 5856 1.40 163.33 53.9 62.7 53.9 62.7
FH103-11P-132S-04E 303 334
10 13 5012 1.60 139.78 56.1 63.6 56.1 63.6
12 14 4395 1.85 122.58 57.5 64.3 57.5 64.3
14 16 3882 2.10 108.27 58.5 64.8 58.5 64.8
16 19 3369 2.40 93.98 59.4 65.4 59.4 65.4
18 22 2911 2.75 81.20 60.0 65.9 60.0 65.9
9.1 11 5800 0.80 161.76 ** ** ** **
9.4 11 5593 0.85 155.99 ** ** ** **
10 12 5122 0.90 142.85 23.3 38.2 23.3 38.2
11 13 4934 0.95 137.63 24.8 38.5 24.8 38.5
12 15 4330 1.05 120.77 29.0 39.3 29.0 39.3
13 15 4199 1.10 117.13 29.8 39.4 29.8 39.4
14 17 3748 1.25 104.54 32.1 40.0 32.1 40.0 FH093-11P-132S-04E 209 330
16 19 3320 1.40 92.59 33.9 40.6 33.9 40.6
18 22 2871 1.60 80.09 35.5 41.2 35.5 41.2
19 23 2769 1.65 77.23 35.9 41.3 35.9 41.3
21 26 2443 1.85 68.15 36.8 41.8 36.8 41.8
25 30 2079 2.20 57.99 37.7 42.2 37.7 42.2
29 35 1794 2.55 50.03 38.3 42.6 38.3 42.6

Legend see page 211 ** ... on request

258 WG20 Gear Units and Geared Motors www.weg.net

 PN = 5.5 kW IE3
50 Hz 60 Hz at 50 Hz

5.5 kW 6.6 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
13 16 3948 0.80 110.11 ** ** ** **
14 17 3633 0.85 101.32 ** ** ** **
16 19 3338 0.90 93.11 16.1 27.1 16.1 7.4
17 21 3047 1.00 84.99 19.0 33.3 19.0 7.8
18 22 2870 1.05 80.04 20.4 36.4 20.4 8.1
20 25 2568 1.15 71.62 22.5 41.0 22.5 8.5
FH083-11P-132S-04E 155 326
21 25 2505 1.20 69.87 22.9 41.1 22.9 8.6
24 29 2146 1.30 59.86 24.8 41.7 24.7 9.2
25 31 2070 1.35 57.73 25.2 41.8 24.2 9.3
29 35 1827 1.45 50.95 26.2 42.2 22.6 9.7
34 41 1532 1.65 42.74 27.2 42.6 20.8 10.1
41
43
49
52
1291
1214
1.85
2.30
36.02
33.87
27.9
28.0
43.0
43.1
19.1
18.7
10.5
10.6
F
FH082-11P-132S-04E 146 326
49 59 1076 2.80 30.00 28.3 43.3 17.6 10.8
27 33 1942 0.80 54.16 ** ** ** **
FH073-11P-132S-04E 107 324
28 34 1873 0.85 52.23 ** ** ** **
33 39 1614 0.95 45.02 14.6 15.7 14.6 4.5
37 45 1409 1.10 39.31 16.2 16.1 15.6 4.9
42 51 1246 1.25 34.74 17.2 16.5 14.6 5.2
50 60 1053 1.45 29.38 18.2 16.9 13.4 5.6
58 70 905 1.70 25.25 18.8 17.2 12.4 5.9
66 80 791 1.90 22.05 19.2 17.4 11.6 6.1
71 85 743 1.30 20.72 19.4 16.8 11.6 5.6
FH072-11P-132S-04E 106 324
78 93 677 2.25 18.89 19.6 17.6 10.7 6.4
80 97 653 2.30 18.21 19.6 17.7 10.6 6.4
81 98 649 1.75 18.09 19.6 17.1 10.9 5.8
91 110 577 2.65 16.08 19.8 17.8 10.0 6.6
92 110 573 1.95 15.99 19.8 17.3 10.2 6.1
108 131 485 2.30 13.52 20.0 17.6 9.5 6.3
126 152 417 2.65 11.62 20.1 17.8 8.8 6.5
49 59 1075 0.80 29.98 ** ** ** **
58 70 905 0.95 25.23 7.4 11.9 7.4 2.4
63 76 830 1.00 23.14 8.4 12.5 8.4 2.6
70 85 748 1.10 20.87 9.3 12.8 9.3 2.9
77 92 686 1.20 19.14 9.9 13.0 9.9 3.1
83 99 636 1.30 17.75 10.3 13.2 9.7 3.2
85 103 616 0.95 17.18 10.4 12.5 10.1 2.6
90 108 584 1.45 16.28 10.7 13.3 9.3 3.4
95 115 551 1.50 15.38 10.9 13.5 9.0 3.5
104 125 506 1.65 14.11 11.1 13.6 8.6 3.6
109 131 484 1.20 13.49 11.3 13.1 8.8 3.2
FH062-11P-132S-04E 83 322
113 136 466 1.80 12.99 11.4 13.7 8.2 3.8
117 141 449 1.85 12.53 11.4 13.8 8.1 3.8
123 148 427 1.95 11.91 11.5 13.9 7.9 3.9
128 154 412 2.00 11.49 11.6 13.9 7.8 4.0
137 165 384 2.15 10.70 11.7 14.0 7.5 4.1
141 170 373 1.55 10.41 11.8 13.6 7.7 3.6
149 180 352 2.35 9.81 11.8 14.1 7.2 4.1
170 205 309 1.85 8.61 12.0 13.9 7.0 3.9
200 241 262 2.20 7.32 12.1 14.1 6.5 4.1
231 278 228 2.55 6.35 12.2 14.2 6.1 4.3
273 329 192 3.00 5.36 12.3 14.4 5.6 4.4

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 259

 PN = 5.5 kW IE3
50 Hz 60 Hz at 50 Hz

5.5 kW 6.6 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
70 85 747 0.85 20.83 ** ** ** **
77 93 682 0.90 19.03 4.5 6.9 4.5 3.2
86 104 611 1.00 17.04 5.9 9.9 5.9 3.4
94 113 558 1.10 15.57 6.7 10.3 6.7 3.6
106 128 495 1.25 13.82 7.5 10.5 7.5 3.8
116 140 453 1.35 12.63 7.9 10.6 7.9 3.9
127 153 415 1.45 11.57 8.2 10.7 8.2 4.0
128 154 412 0.90 11.48 8.2 10.2 8.2 3.5
139 167 379 1.55 10.57 8.5 10.8 8.5 4.1
FH052-11P-132S-04E 68 320
156 188 336 1.70 9.38 8.8 11.0 8.6 4.3
156 188 337 1.10 9.39 8.8 10.5 8.7 3.8
F 162
171
195
206
324
307
1.75
1.80
9.04
8.57
8.8
8.9
11.0
11.1
8.5
8.3
4.3
4.4
177 214 296 1.85 8.26 9.0 11.1 8.1 4.4
192 232 273 1.35 7.62 9.1 10.8 7.9 4.1
230 277 229 1.60 6.38 9.3 11.0 7.3 4.3
283 341 185 1.95 5.17 9.1 11.2 6.7 4.5
294 354 179 2.05 4.98 8.9 11.2 6.5 4.5

Legend see page 211 ** ... on request

260 WG20 Gear Units and Geared Motors www.weg.net

 PN = 7.5 kW IE3
50 Hz 60 Hz at 50 Hz

7.5 kW 9.0 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
3.0 3.6 21698 0.85 488.09 ** ** ** **
3.1 3.7 21000 0.90 473.37 63.4 109.6 63.4 109.6
3.2 3.8 20547 0.90 463.14 66.0 113.1 66.0 113.1
FH154-11P-L132M-04F 733 344
3.6 4.3 18090 1.00 409.44 77.8 115.2 77.8 115.2
3.7 4.4 17588 1.05 398.90 79.8 115.6 79.8 115.6
4.2 5.1 15119 1.20 345.03 88.4 117.6 88.4 117.6
3.8 4.6 17096 0.80 383.78 ** ** ** **
4.1 5.0 15861 0.85 356.79 ** ** ** **
4.2 5.1 15554 0.85 349.88 ** ** ** **
4.3 5.2 14968 0.90 337.39 63.1 83.1 63.1 83.1
4.4 5.3 14845 0.90 334.62 63.6 83.2 63.6 83.2 FH124-11P-L132M-04F 481 340
4.9
5.0
5.9
6.1
13312
12810
1.00
1.05
301.29
290.53
69.4
71.1
84.7
85.2
69.4
71.1
84.7
85.2
F
5.1 6.1 12708 1.05 288.23 71.4 85.3 71.4 85.3
5.9 7.1 10877 1.20 248.21 76.6 87.0 76.6 87.0
6.6 8.0 10789 1.25 220.67 76.8 87.1 76.8 87.1
7.6 9.2 9407 1.40 192.40 80.0 88.4 80.0 88.4
7.9 9.5 9071 1.45 185.53 80.7 88.8 80.7 88.8
8.8 11 8103 1.65 165.73 82.5 89.7 82.5 89.7
FH123-11P-L132M-04F 457 338
10 12 6978 1.90 142.72 84.3 90.8 84.3 90.8
12 14 6095 2.15 124.67 85.5 91.6 85.5 91.6
14 17 5150 2.55 105.34 86.6 92.5 86.6 92.5
16 20 4436 2.95 90.74 87.3 93.2 87.3 93.2
6.7 8.1 10647 0.80 217.78 ** ** ** **
7.7 9.4 9242 0.90 189.04 38.9 58.9 38.9 58.9
8.0 9.7 8912 0.90 182.29 40.9 59.3 40.9 59.3
9.0 11 7985 1.05 163.33 45.8 60.3 45.8 60.3
10 13 6834 1.20 139.78 50.6 61.6 50.6 61.6
12 14 5993 1.35 122.58 53.5 62.5 53.5 62.5
12 15 5902 1.40 120.72 53.7 62.6 53.7 62.6 FH103-11P-L132M-04F 317 334
14 16 5293 1.55 108.27 55.4 63.3 55.4 63.3
16 19 4595 1.75 93.98 57.1 64.1 57.1 64.1
16 20 4431 1.85 90.63 57.5 64.2 57.5 64.2
18 22 3970 2.05 81.20 58.4 64.7 58.4 64.7
21 25 3397 2.40 69.49 59.3 65.4 59.3 65.4
24 29 2934 2.75 60.02 60.0 65.9 60.0 65.9
41 49 1757 2.50 35.93 61.3 67.2 61.3 67.2
FH102-11P-L132M-04F 291 334
79 95 910 2.50 18.62 51.4 68 51.4 68.0
12 15 5905 0.80 120.77 ** ** ** **
13 15 5727 0.80 117.13 ** ** ** **
14 17 5111 0.90 104.54 23.4 38.2 23.4 38.2
16 19 4527 1.00 92.59 27.8 39.0 27.8 39.0
18 22 3916 1.15 80.09 31.3 39.8 31.3 39.8 FH093-11P-L132M-04F 223 330
19 23 3776 1.20 77.23 32.0 40.0 32.0 40.0
21 26 3332 1.40 68.15 33.9 40.6 33.9 40.6
25 31 2835 1.60 57.99 35.7 41.2 35.7 41.2
29 35 2446 1.85 50.03 36.8 41.8 36.8 41.8
38 46 1890 2.30 38.65 38.1 42.5 38.1 42.5
43 52 1669 2.70 34.13 38.5 42.8 38.5 42.8
51 62 1397 2.50 28.57 38.9 43.1 38.9 43.1 FH092-11P-L132M-04F 209 330
77 93 929 2.30 19.01 39.5 43.6 39.5 43.6
104 126 687 2.50 14.05 37.6 44.0 37.6 44.0
18 22 3913 0.80 80.04 ** ** ** **
20 25 3502 0.85 71.62 ** ** ** **
21 25 3416 0.85 69.87 ** ** ** **
24 30 2927 0.95 59.86 20.0 35.5 20.0 8.0
FH083-11P-L132M-04F 169 326
25 31 2822 1.00 57.73 20.8 37.2 20.8 8.1
29 35 2491 1.10 50.95 23.0 41.2 23.0 8.7
34 41 2090 1.20 42.74 25.1 41.8 22.5 9.3
41 49 1761 1.40 36.02 26.4 42.3 20.6 9.8

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 261

 PN = 7.5 kW IE3
50 Hz 60 Hz at 50 Hz

7.5 kW 9.0 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
43 52 1656 1.70 33.87 26.8 42.4 20.0 9.9
49 59 1467 2.05 30.00 27.4 42.7 18.8 10.2
56 68 1269 2.40 25.95 27.9 43.0 17.6 10.5
FH082-11P-L132M-04F 160 326
66 80 1080 2.80 22.08 28.3 43.3 16.3 10.8
103 125 693 2.55 14.18 29.0 43.8 13.6 11.3
119 144 600 2.95 12.27 29.1 43.9 12.7 11.4
37 45 1922 0.80 39.31 ** ** ** **
42 51 1698 0.90 34.74 13.9 15.5 13.9 4.3
50 60 1436 1.05 29.38 16.0 16.1 14.6 4.8
58 70 1234 1.25 25.25 17.3 16.5 13.5 5.2
66 80 1078 1.40 22.05 18.1 16.8 12.6 5.6
F 71
78
85
94
1013
924
0.95
1.65
20.72
18.89
18.4
18.8
16.0
17.1
12.7
11.6
4.8
5.9
80 97 890 1.70 18.21 18.9 17.2 11.4 5.9
81 98 884 1.25 18.09 18.9 16.4 11.8 5.1
FH072-11P-L132M-04F 120 324
91 110 786 1.95 16.08 19.2 17.4 10.7 6.1
92 111 782 1.40 15.99 19.3 16.7 11.0 5.5
108 131 661 1.70 13.52 19.6 17.1 10.2 5.8
109 131 660 2.30 13.49 19.6 17.7 9.8 6.4
126 152 568 1.95 11.62 19.8 17.3 9.4 6.1
129 156 555 2.75 11.36 19.9 17.9 9.0 6.6
144 175 496 2.25 10.14 20.0 17.5 8.8 6.3
169 204 425 2.65 8.69 20.1 17.8 8.2 6.5
175 211 410 2.50 8.38 20.1 17.8 8.1 6.5
70 85 1020 0.85 20.87 ** ** ** **
77 92 936 0.90 19.14 6.9 10.7 6.9 2.2
83 100 868 0.95 17.75 7.9 12.4 7.9 2.5
90 109 796 1.05 16.28 8.8 12.6 8.8 2.7
95 115 752 1.10 15.38 9.3 12.8 9.3 2.9
104 125 690 1.20 14.11 9.9 13.0 9.4 3.0
109 131 660 0.90 13.49 10.1 12.3 9.2 2.4
113 136 635 1.30 12.99 10.3 13.2 9.0 3.2
117 141 613 1.35 12.53 10.5 13.3 8.8 3.3
123 149 582 1.45 11.91 10.7 13.3 8.6 3.4
FH062-11P-L132M-04F 97 322
128 154 562 1.50 11.49 10.8 13.4 8.4 3.5
137 165 523 1.60 10.70 11.0 13.6 8.1 3.6
141 170 509 1.15 10.41 11.1 13.0 8.4 3.0
149 180 480 1.75 9.81 11.3 13.7 7.8 3.7
170 206 421 1.40 8.61 11.6 13.4 7.6 3.4
200 242 358 1.60 7.32 11.8 13.7 7.0 3.7
231 279 310 1.85 6.35 12.0 13.9 6.5 3.9
273 330 262 2.20 5.36 12.1 14.1 6.0 4.1
283 342 253 2.30 5.17 12.2 14.1 5.9 4.2
332 401 216 2.65 4.41 12.2 14.3 5.5 4.3
94 114 761 0.80 15.57 ** ** ** **
106 128 676 0.90 13.82 4.7 7.3 4.7 3.2
116 140 617 1.00 12.63 5.8 9.7 5.8 3.4
127 153 566 1.10 11.57 6.6 10.3 6.6 3.6
139 167 517 1.15 10.57 7.2 10.4 7.2 3.7
156 189 459 1.25 9.38 7.8 10.6 7.8 3.9
162 196 442 1.30 9.04 8.0 10.6 8.0 3.9 FH052-11P-L132M-04F 82 320
171 207 419 1.35 8.57 8.2 10.7 8.2 4.0
177 214 404 1.35 8.26 8.3 10.8 8.3 4.1
192 232 373 1.00 7.62 8.5 10.4 8.5 3.7
230 277 312 1.20 6.38 8.9 10.6 7.8 3.9
283 342 253 1.45 5.17 9.2 10.9 7.0 4.2
294 355 243 1.50 4.98 9.2 10.9 6.9 4.2

Legend see page 211 ** ... on request

262 WG20 Gear Units and Geared Motors www.weg.net

 PN = 9.2 kW IE3
50 Hz 60 Hz at 50 Hz

9.2 kW 11 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
3.6 4.3 22404 0.85 409.44 ** ** ** **
3.7 4.4 21827 0.85 398.90 ** ** ** ** FH154-11P-L132M-04G 738 344
4.2 5.1 18763 1.00 345.03 74.9 114.6 74.9 114.6
4.8 5.9 16520 0.80 301.29 ** ** ** **
5.0 6.1 15897 0.85 290.53 ** ** ** **
FH124-11P-L132M-04G 486 340
5.1 6.1 15771 0.85 288.23 ** ** ** **
5.9 7.1 13498 1.00 248.21 68.8 84.5 68.8 84.5
6.6 8.0 13279 1.00 220.67 69.5 84.7 69.5 84.7
7.6 9.2 11578 1.15 192.40 74.7 86.3 74.7 86.3
7.9 9.5 11165 1.20 185.53 75.9 86.7 75.9 86.7
8.8 11 9973 1.35 165.73 78.8 87.9 78.8 87.9
10
12
12
14
8589
7502
1.55
1.75
142.72
124.67
81.6
83.5
89.2
90.3
81.6
83.5
89.2
90.3 FH123-11P-L132M-04G 462 338
F
12 15 7271 1.80 120.82 83.9 90.5 83.9 90.5
14 17 6113 2.00 101.58 85.5 91.6 85.5 91.6
14 17 6339 2.10 105.34 85.2 91.4 85.2 91.4
16 19 5461 2.40 90.74 86.3 92.2 86.3 92.2
19 23 4702 2.80 78.14 87.1 93.0 87.1 93.0
8.9 11 9829 0.85 163.33 ** ** ** **
10 13 8412 1.00 139.78 43.7 59.8 43.7 59.8
12 14 7377 1.10 122.58 48.5 61.0 48.5 61.0
13 16 6515 1.25 108.27 51.8 61.9 51.8 61.9
FH103-11P-L132M-04G 322 334
16 19 5656 1.45 93.98 54.5 62.9 54.5 62.9
18 22 4886 1.65 81.20 56.4 63.7 56.4 63.7
21 25 4182 1.95 69.49 58.0 64.5 58.0 64.5
24 29 3612 2.25 60.02 59.0 65.1 59.0 65.1
34 41 2572 2.50 42.74 60.5 66.3 60.5 66.3
41 49 2162 2.00 35.93 60.9 66.8 60.9 66.8
FH102-11P-L132M-04G 296 334
66 80 1332 2.50 22.14 55.1 67.5 55.1 67.5
78 95 1121 2.00 18.62 52.1 67.8 52.1 67.8
16 19 5572 0.85 92.59 ** ** ** **
18 22 4820 0.95 80.09 25.7 38.6 25.7 38.6
19 23 4648 1.00 77.23 27.0 38.8 27.0 38.8
FH093-11P-L132M-04G 228 330
21 26 4101 1.10 68.15 30.3 39.6 30.3 39.6
25 30 3490 1.30 57.99 33.2 40.4 33.2 40.4
29 35 3011 1.50 50.03 35.1 41.0 35.1 41.0
38 46 2326 1.90 38.65 37.1 41.9 37.1 41.9
43 52 2054 2.20 34.13 37.7 42.3 37.7 42.3
49 60 1783 2.55 29.63 38.3 42.6 38.3 42.6
51 62 1719 2.00 28.57 38.4 42.7 38.4 42.7
FH092-11P-L132M-04G 214 330
57 69 1541 2.95 25.60 38.7 43.0 38.7 43.0
77 93 1144 1.90 19.01 39.3 43.3 39.3 43.3
87 105 1010 2.65 16.79 39.4 43.5 39.4 43.5
104 126 846 2.00 14.05 38.2 43.7 38.2 43.7
24 29 3602 0.80 59.86 ** ** ** **
25 31 3474 0.80 57.73 ** ** ** **
29 35 3066 0.90 50.95 18.8 32.9 18.8 7.8 FH083-11P-L132M-04G 174 326
34 41 2572 1.00 42.74 22.5 41.0 22.5 8.5
41 49 2168 1.10 36.02 24.7 41.7 21.8 9.2
43 52 2038 1.40 33.87 25.3 41.9 21.2 9.4
49 59 1805 1.70 30.00 26.2 42.2 19.8 9.7
56 68 1562 1.95 25.95 27.1 42.6 18.5 10.1
66 80 1329 2.30 22.08 27.8 43.0 17.0 10.5
FH082-11P-L132M-04G 165 326
78 94 1131 2.70 18.79 28.2 43.3 15.7 10.8
103 124 853 2.10 14.18 28.8 43.5 14.1 11.0
119 144 738 2.40 12.27 28.9 43.7 13.2 11.2
140 169 628 2.85 10.44 29.1 43.9 12.3 11.4

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 263

 PN = 9.2 kW IE3
50 Hz 60 Hz at 50 Hz

9.2 kW 11 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
50 60 1768 0.85 29.38 ** ** ** **
58 70 1519 1.00 25.25 15.4 15.9 13.3 4.7
66 80 1327 1.15 22.05 16.8 16.3 13.3 5.0
70 85 1247 0.80 20.72 ** ** ** **
77 93 1137 1.35 18.89 17.8 16.7 12.3 5.4
80 97 1096 1.40 18.21 18.0 16.8 12.1 5.5
81 98 1089 1.05 18.09 18.1 15.8 12.4 4.5
91 110 968 1.60 16.08 18.6 17.0 11.3 5.8
FH072-11P-L132M-04G 125 324
108 131 814 1.40 13.52 19.2 16.6 10.7 5.4
126 152 699 1.60 11.62 19.5 16.9 9.9 5.7
129 155 684 2.20 11.36 19.6 17.6 9.5 6.4
F 144
168
174
203
610
523
1.85
2.15
10.14
8.69
19.7
19.9
17.2
17.5
9.3
8.6
6.0
6.2
174 211 504 2.00 8.38 20.0 17.5 8.4 6.3
197 239 445 2.55 7.40 20.1 17.7 7.9 6.4
235 284 374 3.00 6.21 20.2 17.9 7.3 6.7
82 99 1068 0.80 17.75 ** ** ** **
90 108 980 0.85 16.28 ** ** ** **
95 115 926 0.90 15.38 7.1 11.2 7.1 2.3
103 125 849 1.00 14.11 8.2 12.5 8.2 2.5
112 136 782 1.05 12.99 9.0 12.7 9.0 2.8
117 141 754 1.10 12.53 9.3 12.8 9.1 2.9
123 148 717 1.15 11.91 9.6 12.9 9.0 3.0
127 154 691 1.20 11.49 9.8 13.0 9.0 3.0
136 165 644 1.30 10.70 10.2 13.2 8.7 3.2 FH062-11P-L132M-04G 102 322
140 170 626 0.95 10.41 10.4 12.5 8.4 2.5
149 180 590 1.40 9.81 10.6 13.3 8.3 3.4
170 205 518 1.15 8.61 11.1 13.0 8.1 3.0
199 241 441 1.30 7.32 11.5 13.3 7.5 3.3
230 278 382 1.50 6.35 11.7 13.6 6.9 3.6
272 329 323 1.80 5.36 12.0 13.8 6.3 3.9
282 341 311 1.85 5.17 12.0 13.9 6.2 3.9
331 400 265 2.20 4.41 12.1 14.1 5.7 4.1
116 140 760 0.80 12.63 ** ** ** **
126 153 696 0.90 11.57 4.1 6.1 4.1 3.2
138 167 636 0.95 10.57 5.5 9.0 5.5 3.3
156 188 564 1.00 9.38 6.6 10.3 6.6 3.6
162 195 544 1.05 9.04 6.9 10.3 6.9 3.6
170 206 516 1.10 8.57 7.2 10.4 7.2 3.7 FH052-11P-L132M-04G 87 320
177 214 497 1.10 8.26 7.4 10.5 7.4 3.8
192 232 459 0.80 7.62 ** ** ** **
229 277 384 0.95 6.38 8.4 10.3 8.2 3.6
282 341 311 1.20 5.17 8.9 10.7 7.4 4.0
293 354 300 1.25 4.98 9.0 10.7 7.2 4.0

Legend see page 211 ** ... on request

264 WG20 Gear Units and Geared Motors www.weg.net

 PN = 11 kW IE3
50 Hz 60 Hz at 50 Hz

11 kW 13 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
4.3 5.1 22419 0.85 345.03 ** ** ** **
4.5 5.4 21251 0.85 327.05 ** ** ** ** FH154-22P-160M-04E 800 344
5.2 6.3 18269 1.00 282.89 77.0 115.0 77.0 115.0
5.7 6.8 18567 1.00 259.81 75.8 114.8 75.8 114.8
6.6 7.9 15991 1.15 223.77 85.6 116.9 85.6 116.9
7.6 9.2 13832 1.35 193.55 92.1 118.6 92.1 118.6
8.6 10 12201 1.50 170.73 96.1 120.0 96.1 120.0
FH153-22P-160M-04E 754 342
10 12 10479 1.75 146.63 99.6 121.4 99.6 121.4
12 14 8895 2.05 124.47 102.4 122.7 102.4 122.7
14 16 7694 2.35 107.66 104.1 123.7 104.1 123.7
15 18 7234 2.50 101.23 104.7 124.1 104.7 124.1
5.9
6.7
7.2
8.0
16128
15770
0.85
0.85
248.21
220.67
**
**
**
**
**
**
**
**
FH124-22P-160M-04E 548 340 F
7.6 9.2 13749 0.95 192.40 67.9 84.3 67.9 84.3
8.9 11 11843 1.10 165.73 74.0 86.1 74.0 86.1
10 12 10199 1.30 142.72 78.2 87.7 78.2 87.7
12 14 8909 1.50 124.67 81.0 88.9 81.0 88.9
14 16 7696 1.70 107.69 83.2 90.1 83.2 90.1 FH123-22P-160M-04E 524 338
16 20 6485 2.05 90.74 85.0 91.3 85.0 91.3
17 20 6364 2.05 89.06 85.2 91.4 85.2 91.4
19 23 5584 2.35 78.14 86.2 92.1 86.2 92.1
20 24 5237 2.50 73.28 86.5 92.5 86.5 92.5
22 26 4878 2.70 68.26 86.9 92.8 86.9 92.8
37 44 2857 2.70 39.98 88.5 94.7 88.5 94.7
FH122-22P-160M-04E 483 338
77 93 1371 2.70 19.18 77.8 96.0 77.8 96.0
11 13 9989 0.85 139.78 ** ** ** **
12 15 8627 0.95 120.72 42.6 59.6 42.6 59.6
14 16 7737 1.05 108.27 47.0 60.6 47.0 60.6
16 19 6716 1.20 93.98 51.1 61.7 51.1 61.7
18 21 5953 1.35 83.30 53.6 62.5 53.6 62.5
FH103-22P-160M-04E 384 334
21 26 4966 1.65 69.49 56.3 63.6 56.3 63.6
22 26 4830 1.70 67.59 56.6 63.8 56.6 63.8
24 30 4289 1.90 60.02 57.8 64.4 57.8 64.4
29 35 3627 2.25 50.75 59.0 65.1 59.0 65.1
35 43 2959 2.75 41.41 60.0 65.9 60.0 65.9
34 42 3054 2.10 42.74 59.9 65.8 59.9 65.8
39 48 2663 2.70 37.26 60.4 66.2 60.4 66.2
FH102-22P-160M-04E 358 334
66 80 1582 2.10 22.14 55.8 67.2 55.8 67.2
76 92 1379 2.70 19.30 53.1 67.5 53.1 67.5
18 22 5723 0.80 80.09 ** ** ** **
21 26 4925 0.95 68.92 24.9 38.5 24.9 38.5
22 26 4870 0.95 68.15 25.3 38.5 25.3 38.5
25 31 4144 1.10 57.99 30.1 39.5 30.1 39.5
27 33 3851 1.20 53.89 31.6 39.9 31.6 39.9 FH093-22P-160M-04E 290 330
29 35 3575 1.30 50.03 32.9 40.3 32.9 40.3
35 42 2999 1.50 41.97 35.1 41.0 35.1 41.0
43 52 2438 1.75 34.12 36.8 41.8 36.8 41.8
55 67 1907 2.05 26.68 38.1 42.5 38.1 42.5
43 52 2439 1.85 34.13 36.8 41.8 36.8 41.8
50 60 2117 2.15 29.63 37.6 42.2 37.6 42.2
57 69 1829 2.50 25.60 38.2 42.6 38.2 42.6
67 81 1566 2.90 21.91 38.7 42.9 38.7 42.9 FH092-22P-160M-04E 276 330
88 106 1200 2.25 16.79 39.2 43.2 39.2 43.2
101 122 1041 2.60 14.57 39.1 43.4 39.1 43.4
117 141 900 3.00 12.59 37.1 43.7 37.1 43.7
34 42 3054 0.85 42.74 ** ** ** **
41 49 2574 0.95 36.02 22.5 41.0 22.5 8.5 FH083-22P-160M-04E 236 326
50 60 2110 1.10 29.53 25.0 41.7 20.7 9.2

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 265

 PN = 11 kW IE3
50 Hz 60 Hz at 50 Hz

11 kW 13 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
49 59 2144 1.40 30.00 24.8 41.7 20.8 9.2
57 68 1854 1.65 25.95 26.1 42.1 19.3 9.6
67 80 1578 1.95 22.08 27.0 42.6 17.7 10.1
78 94 1343 2.25 18.79 27.7 42.9 16.4 10.4
91 110 1158 2.60 16.21 28.2 43.2 15.2 10.7 FH082-22P-160M-04E 227 326
104 125 1013 1.75 14.18 28.5 43.2 14.7 10.7
120 145 877 2.05 12.27 28.7 43.5 13.7 11.0
141 170 746 2.40 10.44 28.9 43.7 12.7 11.2
166 200 635 2.80 8.88 29.1 43.9 11.7 11.4
67 80 1576 1.00 22.05 15.0 15.8 12.1 4.5
78 94 1350 1.15 18.89 16.6 16.2 12.2 5.0
F 91
109
110
132
1149
964
1.35
1.60
16.08
13.49
17.8
18.6
16.7
17.0
11.9
10.8
5.4
5.8
129 156 812 1.85 11.36 19.2 17.3 9.9 6.1
145 175 725 1.55 10.14 19.4 16.9 9.7 5.6 FH072-22P-160M-04E 187 324
158 190 666 2.30 9.32 19.6 17.6 8.9 6.4
169 204 621 1.80 8.69 19.7 17.2 8.9 5.9
199 240 529 2.15 7.40 19.9 17.4 8.2 6.2
237 286 444 2.55 6.21 20.1 17.7 7.6 6.4
281 339 374 3.00 5.23 19.2 17.9 7.0 6.7
104 126 1008 0.85 14.11 ** ** ** **
113 137 928 0.90 12.99 7.1 11.2 7.1 2.3
123 149 851 1.00 11.91 8.2 12.5 8.2 2.5
137 166 765 1.10 10.7 9.2 12.8 8.4 2.8
FH062-22P-160M-04E 164 322
150 181 701 1.20 9.81 9.8 13.0 8.3 3.0
231 280 454 1.30 6.35 11.4 13.2 7.3 3.3
274 331 383 1.50 5.36 11.7 13.6 6.6 3.6
333 402 315 1.85 4.41 12.0 13.9 6.0 3.9

Legend see page 211 ** ... on request

266 WG20 Gear Units and Geared Motors www.weg.net

 PN = 15 kW IE3
50 Hz 60 Hz at 50 Hz

15 kW 18 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
6.5 7.9 21881 0.85 223.77 ** ** ** **
7.6 9.2 18926 1.00 193.55 74.2 114.5 74.2 114.5
8.6 10 16694 1.10 170.73 83.2 116.3 83.2 116.3
10 12 14338 1.30 146.63 90.7 118.2 90.7 118.2
12 14 12171 1.50 124.47 96.2 120.0 96.2 120.0 FH153-22P-160L-04F 777 342
14 16 10527 1.75 107.66 99.6 121.4 99.6 121.4
15 19 9286 1.95 94.97 101.7 122.4 101.7 122.4
18 22 7975 2.30 81.56 103.7 123.5 103.7 123.5
22 26 6635 2.75 67.86 105.4 124.6 105.4 124.6
8.8 11 16205 0.85 165.73 ** ** ** **
10 12 13955 0.95 142.72 67.1 84.1 67.1 84.1
12
14
14
16
12190
10530
1.10
1.25
124.67
107.69
73.0
77.5
85.8
87.4
73.0
77.5
85.8
87.4
F
16 20 8873 1.50 90.74 81.1 88.9 81.1 88.9
19 23 7641 1.75 78.14 83.3 90.1 83.3 90.1 FH123-22P-160L-04F 547 338
20 24 7165 1.85 73.28 84.0 90.6 84.0 90.6
21 26 6675 1.95 68.26 84.8 91.1 84.8 91.1
25 30 5765 2.25 58.96 85.9 91.9 85.9 91.9
30 36 4768 2.60 48.76 87.0 92.9 87.0 92.9
37 44 3923 2.95 40.12 87.8 93.7 87.8 93.7
37 44 3909 1.95 39.98 87.8 93.7 87.8 93.7
43 52 3367 3.00 34.43 88.2 94.3 88.2 94.3
FH122-22P-160L-04F 506 338
76 93 1875 1.95 19.18 79.2 95.4 79.2 95.4
89 107 1615 3.00 16.52 75.2 95.7 75.2 95.7
14 16 10587 0.80 108.27 ** ** ** **
16 19 9190 0.90 93.98 39.2 58.9 39.2 58.9
18 21 8145 1.00 83.30 45.1 60.1 45.1 60.1
21 26 6795 1.20 69.49 50.8 61.6 50.8 61.6
22 26 6609 1.25 67.59 51.5 61.8 51.5 61.8 FH103-22P-160L-04F 407 334
24 30 5869 1.40 60.02 53.8 62.6 53.8 62.6
29 35 4962 1.65 50.75 56.3 63.6 56.3 63.6
35 43 4049 2.00 41.41 58.2 64.7 58.2 64.7
44 53 3285 2.40 33.60 59.5 65.5 59.5 65.5
34 42 4179 1.55 42.74 58.0 64.5 58.0 64.5
39 48 3643 1.95 37.26 58.9 65.1 58.9 65.1
46 55 3139 2.55 32.10 59.7 65.7 59.7 65.7
53 64 2703 3.00 27.64 60.3 66.2 60.3 66.2 FH102-22P-160L-04F 381 334
66 80 2165 1.55 22.14 57.2 66.5 57.2 66.5
76 92 1887 1.95 19.30 54.4 66.8 54.4 66.8
88 107 1626 3.00 16.63 51.6 67.2 51.6 67.2
25 31 5670 0.80 57.99 ** ** ** **
27 33 5269 0.90 53.89 21.9 36.8 21.9 36.8
29 35 4892 0.95 50.03 25.2 38.5 25.2 38.5
FH093-22P-160L-04F 313 330
35 42 4104 1.10 41.97 30.3 39.6 30.3 39.6
43 52 3336 1.30 34.12 33.9 40.6 33.9 40.6
55 67 2609 1.50 26.68 36.3 41.5 36.3 41.5
43 52 3337 1.35 34.13 33.9 40.6 33.9 40.6
49 60 2897 1.60 29.63 35.5 41.2 35.5 41.2
57 69 2503 1.80 25.60 36.6 41.7 36.6 41.7
67 81 2142 2.15 21.91 37.5 42.2 37.5 42.2
77 94 1850 2.45 18.92 38.2 42.5 38.2 42.5
87 106 1642 1.65 16.79 38.5 42.5 38.5 42.5 FH092-22P-160L-04F 299 330
92 111 1565 2.90 16.00 38.7 42.9 38.7 42.9
101 122 1425 1.90 14.57 38.9 42.9 38.9 42.9
116 141 1231 2.20 12.59 38.3 43.2 38.3 43.2
136 165 1054 2.55 10.78 36.1 43.4 36.1 43.4
157 191 910 2.95 9.31 34.3 43.6 34.3 43.6
50 60 2887 0.80 29.53 ** ** ** ** FH083-22P-160L-04F 259 326

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 267

 PN = 15 kW IE3
50 Hz 60 Hz at 50 Hz

15 kW 18 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
49 59 2933 1.05 30.00 19.9 35.3 19.9 8.0
56 68 2537 1.20 25.95 22.7 41.1 21.4 8.6
66 80 2159 1.40 22.08 24.7 41.7 19.5 9.2
78 94 1837 1.65 18.79 26.1 42.2 17.9 9.7
90 110 1585 1.90 16.21 27.0 42.6 16.5 10.1
103 125 1387 1.30 14.18 27.6 42.6 16.0 10.1
108 131 1330 2.30 13.6 27.8 43.0 15.1 10.5 FH082-22P-160L-04F 250 326
119 145 1200 1.50 12.27 28.1 42.9 14.8 10.4
132 160 1081 2.80 11.06 28.3 43.3 13.6 10.8
140 170 1021 1.75 10.44 28.5 43.2 13.6 10.7
165 200 868 2.05 8.88 28.7 43.5 12.6 11.0
F 191
228
232
276
749
629
2.40
2.85
7.66
6.43
28.9
29.1
43.7
43.9
11.7
10.8
11.2
11.4
78 94 1847 0.85 18.89 ** ** ** **
91 110 1572 1.00 16.08 15.0 15.8 10.3 4.5
109 132 1319 1.15 13.49 16.8 16.3 10.4 5.1
129 156 1111 1.40 11.36 17.9 16.7 10.4 5.5
144 175 992 1.15 10.14 18.5 16.1 9.8 4.8
157 190 911 1.65 9.32 18.8 17.1 9.8 5.9 FH072-22P-160L-04F 210 324
169 204 850 1.35 8.69 19.0 16.5 9.7 5.3
198 240 724 1.55 7.40 19.4 16.9 9.0 5.6
236 286 607 1.85 6.21 19.7 17.2 8.2 6.0
280 339 511 2.20 5.23 19.8 17.5 7.5 6.2
341 414 419 2.60 4.29 18.4 17.8 6.8 6.5
137 166 1046 0.80 10.70 ** ** ** **
149 181 959 0.90 9.81 6.5 9.9 6.5 2.2
231 280 621 0.95 6.35 10.4 12.5 6.5 2.6 FH062-22P-160L-04F 187 322
273 331 524 1.10 5.36 11.0 12.9 6.6 3.0
332 402 431 1.35 4.41 11.5 13.3 6.5 3.4

Legend see page 211 ** ... on request

268 WG20 Gear Units and Geared Motors www.weg.net

 PN = 18.5 kW IE3
50 Hz 60 Hz at 50 Hz

18.5 kW 22 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
7.6 9.2 23262 0.80 193.55 ** ** ** **
8.6 10 20520 0.90 170.73 66.2 113.2 66.2 113.2
10 12 17623 1.05 146.63 79.7 115.5 79.7 115.5
12 14 14960 1.25 124.47 88.9 117.7 88.9 117.7
14 16 12939 1.40 107.66 94.3 119.4 94.3 119.4
15 18 12167 1.50 101.23 96.2 120.0 96.2 120.0 FH153-22P-180M-04E 791 342
17 21 10146 1.80 84.42 100.3 121.7 100.3 121.7
18 22 9802 1.85 81.56 100.9 122.0 100.9 122.0
20 24 8721 2.10 72.56 102.6 122.8 102.6 122.8
22 26 8156 2.25 67.86 103.4 123.3 103.4 123.3
26 32 6768 2.70 56.31 105.2 124.4 105.2 124.4
10
12
12
14
17153
14984
0.80
0.90
142.72
124.67
**
63.0
**
83.1
**
63.0
**
83.1
F
14 16 12943 1.05 107.69 70.6 85.0 70.6 85.0
16 20 10906 1.20 90.74 76.5 87.0 76.5 87.0
17 20 10704 1.25 89.06 77.0 87.2 77.0 87.2
19 23 9391 1.40 78.14 80.0 88.5 80.0 88.5
20 24 8807 1.50 73.28 81.2 89.0 81.2 89.0
FH123-22P-180M-04E 561 338
22 26 8204 1.60 68.26 82.3 89.6 82.3 89.6
24 29 7240 1.80 60.24 83.9 90.5 83.9 90.5
25 30 7086 1.85 58.96 84.2 90.7 84.2 90.7
29 35 6146 2.10 51.14 85.5 91.6 85.5 91.6
30 36 5860 2.10 48.76 85.8 91.9 85.8 91.9
37 44 4822 2.40 40.12 87.0 92.9 87.0 92.9
45 54 3964 2.75 32.98 87.7 93.7 87.7 93.7
37 44 4805 1.60 39.98 87.0 92.9 87.0 92.9
43 52 4138 2.45 34.43 87.6 93.5 87.6 93.5
FH122-22P-180M-04E 520 338
77 93 2305 1.60 19.18 79.9 94.9 79.9 94.9
89 107 1985 2.45 16.52 76.0 95.3 76.0 95.3
18 21 10012 0.80 83.30 ** ** ** **
21 26 8352 1.00 69.49 44.0 59.9 44.0 59.9
22 26 8123 1.00 67.59 45.2 60.1 45.2 60.1
24 30 7214 1.15 60.02 49.2 61.1 49.2 61.1
27 33 6485 1.25 53.96 51.9 62.0 51.9 62.0 FH103-22P-180M-04E 421 334
29 35 6099 1.35 50.75 53.1 62.4 53.1 62.4
35 43 4977 1.65 41.41 56.2 63.6 56.2 63.6
44 53 4038 2.00 33.60 58.2 64.7 58.2 64.7
55 66 3225 2.30 26.83 59.6 65.6 59.6 65.6
39 48 4478 1.60 37.26 57.4 64.2 57.4 64.2
46 55 3858 2.10 32.10 58.6 64.9 58.6 64.9
53 64 3322 2.45 27.64 59.5 65.5 59.5 65.5
FH102-22P-180M-04E 395 334
61 74 2901 2.80 24.14 59.5 65.9 59.5 65.9
76 92 2320 1.60 19.30 55.4 66.3 55.4 66.3
88 107 1999 2.45 16.63 52.5 66.7 52.5 66.7
35 42 5044 0.90 41.97 23.9 38.3 23.9 38.3
43 52 4101 1.05 34.12 30.3 39.6 30.3 39.6 FH093-22P-180M-04E 327 330
55 67 3207 1.25 26.68 34.4 40.8 34.4 40.8
50 60 3561 1.30 29.63 32.9 40.3 32.9 40.3
57 69 3077 1.50 25.60 34.8 40.9 34.8 40.9
67 81 2633 1.75 21.91 36.3 41.5 36.3 41.5
78 94 2274 2.00 18.92 37.2 42.0 37.2 42.0
92 111 1923 2.35 16.00 38.0 42.5 38.0 42.5
101 122 1751 1.55 14.57 38.3 42.4 38.3 42.4 FH092-22P-180M-04E 313 330
113 136 1570 2.90 13.06 38.7 42.9 38.7 42.9
117 141 1513 1.80 12.59 38.8 42.7 38.8 42.7
136 165 1296 2.10 10.78 37.0 43.1 37.0 43.1
158 191 1119 2.40 9.31 34.9 43.3 34.9 43.3
187 226 946 2.85 7.87 32.8 43.6 32.8 43.6

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 269

 PN = 18.5 kW IE3
50 Hz 60 Hz at 50 Hz

18.5 kW 22 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
57 68 3119 1.00 25.95 18.3 31.8 18.3 7.7
67 80 2654 1.15 22.08 22.0 39.9 19.3 8.4
78 94 2258 1.35 18.79 24.3 41.5 19.1 9.0
91 110 1948 1.55 16.21 25.7 42.0 17.6 9.5
108 131 1635 1.85 13.60 26.8 42.5 16.0 10.0
120 145 1475 1.20 12.27 27.3 42.4 15.7 9.9
133 160 1329 2.30 11.06 27.8 43.0 14.3 10.5 FH082-22P-180M-04E 264 326
141 170 1255 1.45 10.44 27.9 42.8 14.4 10.3
166 200 1067 1.70 8.88 28.4 43.1 13.2 10.6
170 205 1040 2.90 8.65 28.4 43.4 12.6 10.9
192 232 921 1.95 7.66 28.6 43.4 12.3 10.9
F 229
281
276
339
773
629
2.30
2.85
6.43
5.23
28.9
27.8
43.6
43.9
11.2
10.2
11.1
11.4

Legend see page 211

270 WG20 Gear Units and Geared Motors www.weg.net

 PN = 22 kW IE3
50 Hz 60 Hz at 50 Hz

22 kW 26 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
10 12 20957 0.90 146.63 63.7 110.2 63.7 110.2
12 14 17790 1.05 124.47 79.0 115.4 79.0 115.4
14 16 15387 1.20 107.66 87.5 117.4 87.5 117.4
15 18 14468 1.25 101.23 90.3 118.1 90.3 118.1
17 21 12066 1.50 84.42 96.4 120.1 96.4 120.1
FH153-22P-180L-04F 812 342
18 22 11657 1.55 81.56 97.3 120.4 97.3 120.4
20 24 10371 1.75 72.56 99.8 121.5 99.8 121.5
22 26 9699 1.90 67.86 101.0 122.0 101.0 122.0
26 32 8048 2.25 56.31 103.6 123.4 103.6 123.4
31 38 6712 2.70 46.96 105.3 124.5 105.3 124.5
40 49 5222 3.00 36.54 106.8 125.7 106.8 125.7
85
14
102
16
2480
15392
3.00
0.85
17.35
107.69
108.5
**
127.7
**
108.5
**
127.7
**
FH152-22P-180L-04F 774 342
F
16 20 12969 1.05 90.74 70.6 85.0 70.6 85.0
17 20 12729 1.05 89.06 71.3 85.2 71.3 85.2
19 23 11168 1.20 78.14 75.9 86.7 75.9 86.7
20 24 10474 1.25 73.28 77.6 87.4 77.6 87.4
22 26 9756 1.35 68.26 79.3 88.1 79.3 88.1
FH123-22P-180L-04F 582 338
24 29 8610 1.55 60.24 81.6 89.2 81.6 89.2
25 30 8427 1.55 58.96 81.9 89.4 81.9 89.4
29 35 7309 1.75 51.14 83.8 90.5 83.8 90.5
30 36 6969 1.80 48.76 84.3 90.8 84.3 90.8
37 44 5734 2.05 40.12 86.0 92.0 86.0 92.0
45 54 4714 2.35 32.98 87.1 93.0 87.1 93.0
37 44 5714 1.35 39.98 86.0 92.0 86.0 92.0
43 52 4921 2.05 34.43 86.9 92.8 86.9 92.8
49 60 4256 2.95 29.78 87.5 93.4 87.5 93.4
FH122-22P-180L-04F 541 338
77 93 2741 1.35 19.18 80.9 94.4 80.9 94.4
89 107 2361 2.05 16.52 76.9 94.9 76.9 94.9
103 124 2042 2.95 14.29 73.1 95.2 73.1 95.2
21 26 9932 0.85 69.49 ** ** ** **
22 26 9660 0.85 67.59 ** ** ** **
24 30 8578 0.95 60.02 42.8 59.6 42.8 59.6
27 33 7712 1.05 53.96 47.1 60.6 47.1 60.6
FH103-22P-180L-04F 442 334
29 35 7253 1.15 50.75 49.0 61.1 49.0 61.1
35 43 5919 1.40 41.41 53.7 62.6 53.7 62.6
44 53 4802 1.65 33.60 56.6 63.8 56.6 63.8
55 66 3835 1.95 26.83 58.6 64.9 58.6 64.9
39 48 5325 1.35 37.26 55.4 63.2 55.4 63.2
46 55 4588 1.75 32.10 57.1 64.1 57.1 64.1
53 64 3950 2.05 27.64 58.4 64.8 58.4 64.8
61 74 3450 2.35 24.14 59.3 65.3 59.3 65.3
FH102-22P-180L-04F 416 334
70 85 2981 2.70 20.86 57.5 65.8 57.5 65.8
76 92 2758 1.35 19.30 56.5 65.7 56.5 65.7
88 107 2377 2.05 16.63 53.4 66.2 53.4 66.2
103 124 2047 2.65 14.32 50.4 66.6 50.4 66.6
43 52 4877 0.90 34.12 25.3 38.5 25.3 38.5
FH093-22P-180L-04F 348 330
55 67 3813 1.05 26.68 31.8 39.9 31.8 39.9
50 60 4235 1.10 29.63 29.6 39.4 29.6 39.4
57 69 3659 1.25 25.60 32.5 40.2 32.5 40.2
67 81 3131 1.45 21.91 34.6 40.9 34.6 40.9
78 94 2704 1.70 18.92 36.1 41.4 36.1 41.4
92 111 2287 2.00 16.00 37.2 42.0 37.2 42.0
101 122 2082 1.30 14.57 37.7 41.9 37.7 41.9
113 136 1867 2.45 13.06 38.1 42.5 38.1 42.5 FH092-22P-180L-04F 334 330
117 141 1799 1.50 12.59 38.3 42.3 38.3 42.3
136 165 1541 1.75 10.78 37.8 42.7 37.8 42.7
139 168 1514 3.00 10.59 36.9 43.0 36.9 43.0
158 191 1331 2.05 9.31 35.6 43.0 35.6 43.0
187 226 1125 2.40 7.87 33.4 43.3 33.4 43.3
229 276 918 2.95 6.42 31.0 43.6 31.0 43.6

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 271

 PN = 22 kW IE3
50 Hz 60 Hz at 50 Hz

22 kW 26 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
57 68 3709 0.85 25.95 ** ** ** **
67 80 3156 1.00 22.08 18.0 31.1 17.6 7.6
78 94 2686 1.15 18.79 21.7 39.3 17.7 8.4
91 110 2317 1.30 16.21 23.9 41.4 17.7 8.9
108 131 1944 1.55 13.60 25.7 42.0 16.9 9.5
120 145 1754 1.05 12.27 26.4 41.9 16.5 9.4
133 160 1581 1.90 11.06 27.0 42.6 15.1 10.1
FH082-22P-180L-04F 285 326
141 170 1492 1.20 10.44 27.3 42.4 15.2 9.9
166 200 1269 1.40 8.88 27.9 42.8 13.9 10.3
170 205 1236 2.45 8.65 28.0 43.1 13.2 10.6
192 232 1095 1.65 7.66 28.3 43.1 12.9 10.6
F 229
281
276
339
919
747
1.95
2.40
6.43
5.23
28.6
28.2
43.4
43.7
11.8
10.6
10.9
11.2
359 434 585 2.70 4.09 25.8 44.0 9.4 11.5

Legend see page 211 ** ... on request

272 WG20 Gear Units and Geared Motors www.weg.net

 PN = 30 kW IE3
50 Hz 60 Hz at 50 Hz

30 kW 36 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
12 15 23617 0.80 122.00 ** ** ** **
14 17 20841 0.90 107.66 64.4 111.7 64.4 111.7
15 18 19596 0.95 101.23 71.0 113.9 71.0 113.9
16 19 18384 1.00 94.97 76.5 114.9 76.5 114.9
18 21 16342 1.15 84.42 84.4 116.6 84.4 116.6
20 25 14046 1.30 72.56 91.5 118.5 91.5 118.5
FH153-22P-200L-04E 870 342
22 26 13136 1.40 67.86 93.9 119.2 93.9 119.2
24 28 12155 1.50 62.79 96.2 120.0 96.2 120.0
26 32 10901 1.70 56.31 98.8 121.1 98.8 121.1
32 38 9091 2.00 46.96 102.0 122.5 102.0 122.5
37 44 7813 2.35 40.36 103.9 123.6 103.9 123.6
42
41
51
49
6762
7073
2.70
2.20
34.93
36.54
105.2
104.9
124.5
124.2
105.2
104.9
124.5
124.2
F
FH152-22P-200L-04E 832 342
85 103 3359 2.20 17.35 108.1 126.9 108.1 126.9
17 20 17240 0.80 89.06 ** ** ** **
19 23 15126 0.90 78.14 62.4 82.9 62.4 82.9
20 24 14186 0.95 73.28 66.3 83.8 66.3 83.8
22 26 13214 1.00 68.26 69.7 84.8 69.7 84.8
25 30 11661 1.15 60.24 74.5 86.3 74.5 86.3
29 35 9900 1.30 51.14 78.9 88.0 78.9 88.0
FH123-22P-200L-04E 640 338
30 37 9439 1.30 48.76 79.9 88.4 79.9 88.4
34 41 8450 1.45 43.65 81.9 89.4 81.9 89.4
37 44 7766 1.50 40.12 83.1 90.0 83.1 90.0
45 54 6384 1.75 32.98 85.2 91.3 85.2 91.3
53 64 5420 1.95 28.00 86.3 92.3 86.3 92.3
62 74 4627 2.15 23.90 87.2 93.0 87.2 93.0
50 60 5765 2.20 29.78 85.9 91.9 85.9 91.9
56 68 5085 2.60 26.27 86.7 92.6 86.7 92.6
66 79 4367 3.00 22.56 86.8 93.3 86.8 93.3 FH122-22P-200L-04E 599 338
104 125 2766 2.20 14.29 74.5 94.4 74.5 94.4
117 141 2441 3.00 12.61 71.4 94.8 71.4 94.8
27 33 10446 0.80 53.96 ** ** ** **
29 35 9824 0.85 50.75 ** ** ** **
36 43 8016 1.00 41.41 45.7 60.2 45.7 60.2 FH103-22P-200L-04E 500 334
44 53 6504 1.25 33.60 51.8 61.9 51.8 61.9
55 66 5194 1.45 26.83 55.7 63.4 55.7 63.4
54 64 5351 1.50 27.64 55.3 63.2 55.3 63.2
61 74 4673 1.75 24.14 56.9 64.0 56.9 64.0
71 85 4038 2.00 20.86 58.2 64.7 58.2 64.7
86 103 3339 2.40 17.25 55.3 65.5 55.3 65.5
FH102-22P-200L-04E 474 334
103 124 2772 1.95 14.32 52.2 65.7 52.2 65.7
104 125 2747 2.95 14.19 51.3 66.1 51.3 66.1
118 142 2422 2.25 12.51 49.5 66.2 49.5 66.2
137 165 2091 2.60 10.80 46.8 66.6 46.8 66.6
68 81 4241 1.10 21.91 29.5 39.4 29.5 39.4
78 94 3663 1.25 18.92 32.5 40.1 32.5 40.1
93 111 3097 1.50 16.00 34.8 40.9 34.8 40.9
113 136 2528 1.80 13.06 36.6 41.7 36.6 41.7
137 165 2087 1.30 10.78 37.7 41.9 37.7 41.9
140 168 2050 2.20 10.59 37.7 42.3 37.7 42.3
FH092-22P-200L-04E 392 330
159 191 1802 1.50 9.31 37.2 42.3 37.2 42.3
175 210 1638 2.45 8.46 35.1 42.8 35.1 42.8
188 226 1523 1.80 7.87 34.7 42.7 34.7 42.7
231 277 1243 2.20 6.42 32.0 43.1 32.0 43.1
284 342 1009 2.60 5.21 29.5 43.5 29.5 43.5
356 428 805 2.85 4.16 27.1 43.8 27.1 43.8

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 273

 PN = 37 kW IE3
50 Hz 60 Hz at 50 Hz

37 kW 44 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
16 19 22674 0.80 94.97 ** ** ** **
18 21 20155 0.90 84.42 68.1 113.5 68.1 113.5
20 25 17324 1.05 72.56 80.8 115.8 80.8 115.8
22 26 16202 1.15 67.86 84.9 116.7 84.9 116.7
24 28 14991 1.25 62.79 88.8 117.7 88.8 117.7 FH153-22P-200L-04F 897 342
26 32 13444 1.35 56.31 93.1 119.0 93.1 119.0
32 38 11212 1.65 46.96 98.2 120.8 98.2 120.8
37 44 9636 1.90 40.36 101.1 122.1 101.1 122.1
42 51 8340 2.20 34.93 103.2 123.2 103.2 123.2
41 49 8724 1.80 36.54 102.6 122.8 102.6 122.8
53 64 6649 2.75 27.85 105.4 124.5 105.4 124.5 FH152-22P-200L-04F 859 342
F 85
22
103
26
4142
16297
1.80
0.80
17.35
68.26
107.6
**
126.1
**
107.6
**
126.1
**
25 30 14382 0.95 60.24 65.5 83.6 65.5 83.6
29 35 12210 1.05 51.14 72.9 85.7 72.9 85.7
30 37 11641 1.05 48.76 74.6 86.3 74.6 86.3
34 41 10421 1.20 43.65 77.7 87.5 77.7 87.5 FH123-22P-200L-04F 667 338
37 44 9579 1.25 40.12 79.6 88.3 79.6 88.3
45 54 7874 1.40 32.98 82.9 89.9 82.9 89.9
53 64 6685 1.55 28.00 84.7 91.1 84.7 91.1
62 75 5706 1.75 23.90 86.0 92.0 86.0 92.0
50 60 7110 1.80 29.78 84.1 90.6 84.1 90.6
56 68 6272 2.10 26.27 85.3 91.5 85.3 91.5
66 79 5386 2.40 22.56 86.4 92.3 86.4 92.3
79 95 4481 2.80 18.77 82.9 93.2 82.9 93.2 FH122-22P-200L-04F 626 338
104 125 3412 1.80 14.29 76.0 93.7 76.0 93.7
117 141 3011 2.45 12.61 72.7 94.1 72.7 94.1
137 165 2586 2.80 10.83 68.7 94.6 68.7 94.6
36 43 9887 0.85 41.41 ** ** ** **
44 53 8022 1.00 33.60 45.7 60.2 45.7 60.2 FH103-22P-200L-04F 527 334
55 66 6406 1.15 26.83 52.1 62.0 52.1 62.0
54 64 6599 1.25 27.64 51.5 61.8 51.5 61.8
61 74 5763 1.40 24.14 54.2 62.8 54.2 62.8
71 85 4980 1.65 20.86 56.2 63.6 56.2 63.6
86 103 4118 1.95 17.25 57.0 64.6 57.0 64.6
103 124 3419 1.60 14.32 53.8 64.9 53.8 64.9
104 126 3388 2.40 14.19 52.7 65.4 52.7 65.4
118 142 2987 1.85 12.51 50.9 65.5 50.9 65.5
127 153 2786 2.85 11.67 48.8 66.1 48.8 66.1
FH102-22P-200L-04F 501 334
137 165 2579 2.15 10.80 48.0 66.0 48.0 66.0
149 180 2366 3.25 9.91 45.8 66.5 45.8 66.5
166 199 2134 2.55 8.94 44.6 66.5 44.6 66.5
175 211 2017 3.65 8.45 43.2 66.9 43.2 66.9
201 242 1755 3.10 7.35 41.4 67.0 41.4 67.0
245 295 1442 3.80 6.04 38.5 67.4 38.5 67.4
288 347 1225 4.45 5.13 36.3 67.6 36.3 67.6
338 407 1046 5.20 4.38 34.3 67.3 34.3 67.3

Legend see page 211 ** ... on request

274 WG20 Gear Units and Geared Motors www.weg.net

 PN = 45 kW IE3
50 Hz 60 Hz at 50 Hz

45 kW 55 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
18 22 23683 0.80 81.56 ** ** ** **
20 25 21069 0.90 72.56 63.0 108.7 63.0 108.7
22 26 19705 0.95 67.86 70.4 113.8 70.4 113.8
24 28 18232 1.00 62.79 77.2 115.0 77.2 115.0
FH153-22P-225S/M-04F 1034 342
26 32 16351 1.15 56.31 84.4 116.6 84.4 116.6
32 38 13636 1.35 46.96 92.6 118.8 92.6 118.8
37 44 11719 1.55 40.36 97.1 120.4 97.1 120.4
42 51 10143 1.80 34.93 100.3 121.7 100.3 121.7
41 49 10610 1.50 36.54 99.4 121.3 99.4 121.3
53 64 8087 2.25 27.85 103.5 123.4 103.5 123.4
63 76 6789 2.70 23.38 105.2 124.4 105.2 124.4 FH152-22P-225S/M-04F 996 342
85
112
103
135
5038
3839
1.50
2.60
17.35
13.22
106.9
107.8
125.3
126.4
106.9
107.8
125.3
126.4
F
25 30 17120 0.80 58.96 ** ** ** **
29 35 14850 0.85 51.14 ** ** ** **
30 37 14159 0.90 48.76 66.4 83.9 66.4 83.9
34 41 12675 0.95 43.65 71.5 85.3 71.5 85.3
FH123-22P-225S/M-04F 804 338
37 44 11650 1.00 40.12 74.6 86.3 74.6 86.3
45 54 9576 1.15 32.98 79.6 88.3 79.6 88.3
53 64 8130 1.30 28.00 82.5 89.7 82.5 89.7
62 75 6940 1.45 23.90 84.4 90.8 84.4 90.8
50 60 8647 1.50 29.78 81.5 89.2 81.5 89.2
56 68 7628 1.75 26.27 83.3 90.1 83.3 90.1
66 79 6551 2.00 22.56 84.9 91.2 84.9 91.2
79 95 5450 2.30 18.77 84.8 92.2 84.8 92.2
FH122-22P-225S/M-04F 763 338
95 114 4524 2.65 15.58 79.0 93.1 79.0 93.1
104 125 4149 1.50 14.29 77.7 92.9 77.7 92.9
117 141 3662 2.00 12.61 74.2 93.4 74.2 93.4
137 165 3145 2.30 10.83 70.0 94.0 70.0 94.0
44 53 9756 0.85 33.60 ** ** ** **
FH103-22P-225S/M-04F 664 334
55 66 7791 0.95 26.83 46.7 60.5 46.7 60.5
54 64 8026 1.00 27.64 45.6 60.2 45.6 60.2
61 74 7010 1.15 24.14 50.0 61.4 50.0 61.4
71 85 6057 1.35 20.86 53.3 62.4 53.3 62.4
86 103 5009 1.60 17.25 56.2 63.6 56.2 63.6
103 124 4158 1.30 14.32 55.6 64.0 55.6 64.0
104 126 4120 1.95 14.19 54.3 64.6 54.3 64.6
118 142 3633 1.50 12.51 52.5 64.7 52.5 64.7
127 153 3389 2.35 11.67 50.1 65.4 50.1 65.4
FH102-22P-225S/M-04F 638 334
137 165 3136 1.75 10.80 49.4 65.3 49.4 65.3
149 180 2878 2.65 9.91 47.0 66.0 47.0 66.0
166 199 2596 2.10 8.94 45.7 66.0 45.7 66.0
175 211 2454 3.00 8.45 44.1 66.4 44.1 66.4
201 242 2134 2.55 7.35 42.4 66.5 42.4 66.5
245 295 1754 3.10 6.04 39.3 67.0 39.3 67.0
288 347 1490 3.65 5.13 37.0 67.3 37.0 67.3
338 407 1272 4.30 4.38 34.9 67.6 34.9 67.6

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 275

 PN = 55 kW IE3
50 Hz 60 Hz at 50 Hz

55 kW 66 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
24 28 22284 0.85 62.79 ** ** ** **
26 32 19984 0.95 56.31 69.0 113.6 69.0 113.6
32 38 16666 1.10 46.96 83.3 116.3 83.3 116.3 FH153-22P-225S/M-04G 1082 342
37 44 14324 1.30 40.36 90.7 118.2 90.7 118.2
42 51 12397 1.50 34.93 95.6 119.8 95.6 119.8
53 64 9884 1.85 27.85 100.7 121.9 100.7 121.9
63 76 8298 2.20 23.38 103.2 123.2 103.2 123.2
77 93 6828 2.65 19.24 105.1 124.4 105.1 124.4 FH152-22P-225S/M-04G 1044 342
112 135 4692 2.10 13.22 107.2 125.6 107.2 125.6
133 161 3939 2.85 11.10 106.4 126.3 106.4 126.3
34 41 15491 0.80 43.65 ** ** ** **
F 37
45
44
54
14239
11705
0.85
0.95
40.12
32.98
**
74.4
**
86.2
**
74.4
**
86.2 FH123-22P-225S/M-04G 852 338
53 64 9937 1.05 28.00 78.8 87.9 78.8 87.9
62 75 8482 1.20 23.90 81.8 89.3 81.8 89.3
56 68 9323 1.40 26.27 80.2 88.5 80.2 88.5
66 79 8007 1.65 22.56 82.7 89.8 82.7 89.8
79 95 6661 1.90 18.77 84.8 91.1 84.8 91.1
95 115 5529 2.15 15.58 81.0 92.2 81.0 92.2
114 137 4610 2.50 12.99 75.4 93.1 75.4 93.1
117 142 4475 1.65 12.61 76.1 92.5 76.1 92.5
132 160 3964 2.80 11.17 71.3 93.7 71.3 93.7
FH122-22P-225S/M-04G 811 338
137 165 3844 1.90 10.83 71.6 93.2 71.6 93.2
153 185 3428 3.10 9.66 67.5 94.2 67.5 94.2
164 198 3198 2.60 9.01 66.8 93.9 66.8 93.9
198 239 2651 3.10 7.47 62.3 94.5 62.3 94.5
238 287 2211 3.70 6.23 58.2 95.0 58.2 95.0
276 333 1902 4.30 5.36 55.2 95.4 55.2 95.4
319 385 1647 4.65 4.64 52.5 95.7 52.5 95.7
61 74 8567 0.95 24.14 42.9 59.6 42.9 59.6
71 86 7403 1.10 20.86 48.4 60.9 48.4 60.9
86 103 6122 1.35 17.25 53.1 62.4 53.1 62.4
104 126 5036 1.60 14.19 56.1 63.6 56.1 63.6
118 143 4440 1.25 12.51 54.5 63.7 54.5 63.7
127 153 4142 1.95 11.67 51.8 64.6 51.8 64.6
137 165 3833 1.45 10.8 51.1 64.4 51.1 64.4 FH102-22P-225S/M-04G 686 334
149 180 3517 2.20 9.91 48.4 65.3 48.4 65.3
166 200 3173 1.75 8.94 47.1 65.2 47.1 65.2
175 211 2999 2.50 8.45 45.3 65.8 45.3 65.8
201 243 2609 2.10 7.35 43.5 65.9 43.5 65.9
245 296 2144 2.55 6.04 40.3 66.5 40.3 66.5
288 348 1821 3.00 5.13 37.8 66.9 37.8 66.9

Legend see page 211 ** ... on request

276 WG20 Gear Units and Geared Motors www.weg.net

 PN = 75 kW IE4
50 Hz 60 Hz at 50 Hz

75 kW 90 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
54 64 13388 1.35 27.85 93.2 119.0 93.2 119.0
64 77 11239 1.65 23.38 98.2 120.8 98.2 120.8
77 93 9249 1.95 19.24 101.8 122.4 101.8 122.4
91 109 7869 2.30 16.37 103.8 123.5 103.8 123.5
105 127 6797 2.65 14.14 105.2 124.4 105.2 124.4 FH152-22S-280S/M-04E 1148 342
113 135 6355 1.55 13.22 105.7 124.1 105.7 124.1
134 161 5336 2.10 11.10 106.7 125.0 106.7 125.0
163 196 4394 2.50 9.14 101.4 125.9 101.4 125.9
192 231 3735 3.00 7.77 95.7 126.5 95.7 126.5
57 68 12628 1.05 26.27 71.7 85.3 71.7 85.3
66 79 10845 1.20 22.56 76.7 87.0 76.7 87.0
79
96
95
115
9023
7489
1.40
1.60
18.77
15.58
80.8
83.5
88.8
90.3
80.8
83.5
88.8
90.3
F
115 138 6244 1.85 12.99 78.5 91.5 78.5 91.5
118 142 6062 1.25 12.61 79.5 90.7 79.5 90.7
133 160 5369 2.05 11.17 73.9 92.3 73.9 92.3
FH122-22S-280S/M-04E 915 338
138 165 5206 1.40 10.83 74.5 91.7 74.5 91.7
154 185 4644 2.30 9.66 69.8 93.0 69.8 93.0
165 199 4331 1.90 9.01 69.3 92.7 69.3 92.7
199 240 3591 2.30 7.47 64.3 93.5 64.3 93.5
239 287 2995 2.75 6.23 60.0 94.2 60.0 94.2
278 334 2577 3.20 5.36 56.7 94.6 56.7 94.6
321 386 2230 3.45 4.64 53.7 95.0 53.7 95.0
71 86 10028 0.80 20.86 ** ** ** **
86 104 8292 1.00 17.25 44.3 59.9 44.3 59.9
105 126 6821 1.20 14.19 50.7 61.6 50.7 61.6
119 143 6014 0.95 12.51 53.4 61.7 53.4 61.7
128 153 5610 1.45 11.67 54.6 62.9 54.6 62.9
138 166 5192 1.05 10.8 54.3 62.7 54.3 62.7
150 181 4764 1.60 9.91 51.0 63.9 51.0 63.9 FH102-22S-280S/M-04E 790 334
167 200 4298 1.30 8.94 49.8 63.8 49.8 63.8
176 212 4062 1.85 8.45 47.6 64.6 47.6 64.6
203 244 3533 1.55 7.35 45.7 64.8 45.7 64.8
247 297 2903 1.90 6.04 42.0 65.6 42.0 65.6
290 349 2466 2.20 5.13 39.3 66.1 39.3 66.1
340 409 2105 2.60 4.38 36.9 66.6 36.9 66.6

Legend see page 211 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 277

 PN = 90 kW IE4
50 Hz 60 Hz at 50 Hz

90 kW 108 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
53 64 16087 1.15 27.85 85.3 116.8 85.3 116.8
64 76 13505 1.35 23.38 92.9 118.9 92.9 118.9
77 93 11113 1.65 19.24 98.4 120.9 98.4 120.9
91 109 9456 1.95 16.37 101.5 122.2 101.5 122.2
105 126 8168 2.25 14.14 103.4 123.3 103.4 123.3
113 135 7636 1.30 13.22 104.2 122.9 104.2 122.9 FH152-22S-280S/M-04F 1350 342
121 145 7111 2.55 12.31 104.8 124.2 104.8 124.2
134 161 6412 1.75 11.10 105.6 124.0 105.6 124.0
163 195 5279 2.10 9.14 103.2 125.1 103.2 125.1
192 230 4488 2.50 7.77 97.2 125.8 97.2 125.8
222 266 3876 2.85 6.71 92.2 126.4 92.2 126.4
F 57
66
68
79
15174
13031
0.90
1.00
26.27
22.56
62.2
70.4
82.9
84.9
62.2
70.4
82.9
84.9
79 95 10842 1.15 18.77 76.7 87.1 76.7 87.1
96 115 8999 1.35 15.58 80.8 88.8 80.8 88.8
115 137 7503 1.55 12.99 81.0 90.3 81.0 90.3
118 142 7284 1.05 12.61 82.3 89.4 82.3 89.4
133 160 6452 1.70 11.17 76.1 91.3 76.1 91.3
FH122-22S-280S/M-04F 1117 338
137 165 6256 1.20 10.83 77.1 90.5 77.1 90.5
154 185 5580 1.90 9.66 71.6 92.1 71.6 92.1
165 198 5204 1.60 9.01 71.3 91.7 71.3 91.7
199 239 4315 1.90 7.47 66.0 92.7 66.0 92.7
239 287 3599 2.30 6.23 61.3 93.5 61.3 93.5
278 333 3096 2.65 5.36 57.8 94.0 57.8 94.0
321 385 2680 2.90 4.64 54.7 94.5 54.7 94.5

PN = 110 kW IE4
50 Hz 60 Hz at 50 Hz

110 kW 132 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min -1
min-1
Nm kN kN kN kN kg
53 64 19662 0.95 27.85 70.7 113.9 70.7 113.9
64 76 16506 1.10 23.38 83.8 116.5 83.8 116.5
77 93 13583 1.35 19.24 92.7 118.9 92.7 118.9
91 109 11557 1.60 16.37 97.5 120.5 97.5 120.5
105 126 9983 1.85 14.14 100.5 121.8 100.5 121.8
113 135 9333 1.10 13.22 101.7 121.3 101.7 121.3
FH152-22S-280S/M-04G 1350 342
121 145 8691 2.10 12.31 102.7 122.9 102.7 122.9
134 161 7836 1.45 11.10 103.9 122.7 103.9 122.7
163 195 6453 1.75 9.14 105.5 124.0 105.5 124.0
192 230 5485 2.05 7.77 99.2 124.9 99.2 124.9
222 266 4737 2.35 6.71 93.9 125.6 93.9 125.6
255 306 4123 2.70 5.84 89.2 126.2 89.2 126.2

Legend see page 211

278 WG20 Gear Units and Geared Motors www.weg.net

Selection tables - Gear units
Structure of the selection tables

1 2 3 4 5 6
IEC motor frame size 7
63 71 80 90 100 112 132 160 180 200 225 - 280

Type iges. M2nenn n2 iexakt n1max

IEC adapter 8
I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 I225 I250 I280

NEMA adapter 9
N213/ N254/ N284/ N324/
N56 N143/145 N182 N184 N364 - -
[Nm] [min-1] [min-1] 215 256 286 326
F022

2 stages 10 F
n1=1400 min-1 11

Maximum torque
130 Nm 12

1 2 13 15
SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size 14 n1max
[mm] 16

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110

1 Type of gear unit

2 Total ratio
3 Permissible output torque at S1 operation (fB = 1.0)
4 Output speed (gear unit) at n1 = 1400 min-1
5 Exact mathematical ratio
6 Maximum permissible input speed gear unit. valid for direct mounting and IEC / NEMA adapter
Max. perm. input speed IEC / NEMA adapter: I63 - I132 / N56 - N213 = 3000 min-1, I160 - I280 / N254 - N364 = 2500 min-1
Max. perm. motor speed (Direct mounting): motor frame size 63 - 180 = 3000 min-1, 200 - 280 = 2500 min-1.
Higher motor speed on request
7 Possible motor frame sizes (Direct mounting)
8 Possible IEC adapter sizes
9 Possible NEMA adapter sizes
10 Number of gear stages
11 Motor speed
12 Maximum torque
13 Maximum input speed - SERVO adapter
14 Possible SERVO adapter sizes
15 Maximum input speed - direct mounting, IEC / NEMA adapter and input unit
Higher input speeds on request
16 Possible input shafts of the input unit

www.weg.net Gear Units and Geared Motors 279

 IEC motor frame size

63 71 80 90 100 - - - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 - - - - - - - -

NEMA adapter

N56 N143/145 N182 - - - - - - - -

[Nm] [min-1] [min-1]
F022 97.85 130 14 1957/20 6000
88.09 130 16 969/11 6000
76.22 130 18 3811/50 6000
68.62 130 20 3774/55 6000
61.80 130 23 309/5 6000
55.64 130 25 612/11 6000
48.69 130 29 2678/55 6000
43.83 130 32 5304/121 6000
37.52 130 37 5253/140 6000

F
33.78 130 41 2601/77 6000
31.79 53 44 1653/52 6000
29.32 130 48 3811/130 6000
2 stages 26.39 130 53 3774/143 6000
24.76 84 57 3219/130 6000
21.89 130 64 1751/80 6000
n1=1400 min-1
20.08 84 70 261/13 6000
19.70 130 71 867/44 6000
Maximum torque 18.88 130 74 1133/60 6000
130 Nm 17.00 130 82 17/1 6000
16.48 130 85 412/25 6000
15.82 84 89 174/11 6000
14.84 130 94 816/55 6000
12.19 84 115 4437/364 6000
12.09 130 116 2781/230 6000
10.89 130 129 2754/253 6000
9.52 84 147 3219/338 6000
7.11 84 197 1479/208 6000
6.13 84 228 319/52 6000
5.35 84 261 348/65 6000
3.93 72 356 2349/598 6000
F032 70.17 220 20 7719/110 6000
63.63 220 22 1909/30 6000
57.07 220 25 2511/44 6000
51.75 220 27 207/4 6000
45.35 220 31 5487/121 6000
41.12 220 34 1357/33 6000
35.03 220 40 2697/77 6000
31.76 220 44 667/21 6000
27.97 220 50 3999/143 6000
27.67 119 51 83/3 6000
25.36 220 55 989/39 6000
2 stages
22.50 147 62 45/2 6000
21.14 220 66 465/22 6000
n1=1400 min-1 19.17 220 73 115/6 6000
17.88 150 78 590/33 6000
16.06 220 87 1767/110 6000
Maximum torque
14.57 220 96 437/30 6000
220 Nm
13.81 150 101 290/21 6000
12.50 220 112 3162/253 6000
11.33 220 124 34/3 6000
11.03 150 127 430/39 6000
9.76 212 144 1395/143 6000
8.85 202 158 115/13 6000
8.33 150 168 25/3 6000
6.33 145 221 19/3 6000
4.93 127 284 340/69 6000
3.85 111 364 50/13 6000

Legend see page 279

280 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
F022 97.85 5000 -
88.09 5000 -
76.22 5000 3000
68.62 5000 3000
61.80 5000 3000
55.64 5000 3000
48.69 5000 3000
43.83 5000 3000
37.52 5000 3000

F
33.78 5000 3000
31.79 5000 -
29.32 5000 3000
26.39 5000 3000
24.76 5000 3000
21.89 5000 3000
20.08 5000 3000
19.70 5000 3000
18.88 4700 3000
17.00 4700 3000
16.48 4200 3000
15.82 5000 3000
14.84 4200 3000
12.19 5000 3000
12.09 3700 3000
10.89 3700 3000
9.52 5000 3000
7.11 5000 3000
6.13 4700 3000
5.35 4200 3000
3.93 3700 3000
F032 70.17 5000 3000
63.63 5000 3000
57.07 5000 3000
51.75 5000 3000
45.35 5000 3000
41.12 5000 3000
35.03 5000 3000
31.76 5000 3000
27.97 5000 3000
27.67 5000 3000
25.36 5000 3000
22.50 5000 3000
21.14 5000 3000
19.17 5000 3000
17.88 5000 3000
16.06 4600 3000
14.57 4600 3000
13.81 5000 3000
12.50 4000 3000
11.33 4000 3000
11.03 5000 3000
9.76 3500 3000
8.85 3500 3000
8.33 5000 3000
6.33 4600 3000
4.93 4000 3000
3.85 3500 3000

Legend see page 279

www.weg.net Gear Units and Geared Motors 281

 IEC motor frame size

63 71 80 90 100 - - - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 - - - - - - - -

NEMA adapter

N56 N143/145 N182 - - - - - - - -

[Nm] [min-1] [min-1]
F042 75.79 322 18 1819/24 6000
69.14 293 20 4494/65 6000
61.98 400 23 2975/48 6000
56.54 396 25 735/13 6000
48.94 400 29 1615/33 6000
44.64 400 31 6384/143 6000
41.20 175 34 8239/200 6000
37.95 400 37 2125/56 6000
34.62 400 40 450/13 6000

F
33.69 236 42 539/16 6000
31.06 400 45 1615/52 6000
28.33 400 49 4788/169 6000
26.60 308 53 133/5 6000
23.91 400 59 765/32 6000
21.81 400 64 567/26 6000
2 stages 20.63 308 68 165/8 6000
18.06 400 78 289/16 6000
16.88 308 83 4389/260 6000
n1=1400 min-1
16.48 400 85 1071/65 6000
14.78 400 95 340/23 6000
Maximum torque 13.48 400 104 4032/299 6000
400 Nm 12.99 308 108 2079/160 6000
11.99 384 117 935/78 6000
10.93 361 128 1848/169 6000
10.03 348 140 1445/144 5600
9.82 308 143 3927/400 6000
9.15 327 153 119/13 5600
8.13 310 172 2635/324 5000
8.03 280 174 924/115 6000
7.84 304 179 2635/336 4800
7.42 291 189 868/117 5000
7.15 285 196 93/13 4800
6.52 247 215 847/130 6000
5.45 222 257 1309/240 5600
4.42 196 317 2387/540 5000
4.26 192 328 341/80 4800
F043 422.98 400 3.3 17765/42 6000
385.85 400 3.6 5016/13 6000
329.48 400 4.2 6919/21 6000
300.55 400 4.7 19536/65 6000
267.14 400 5.2 1870/7 6000
243.69 400 5.7 3168/13 6000
210.48 400 6.7 4420/21 6000
3 stages 192.00 400 7.3 192/1 6000
162.19 400 8.6 15895/98 6000
147.96 400 9.5 13464/91 6000
n1=1400 min-1
126.72 400 11 34595/273 6000
115.60 400 12 19536/169 6000
Maximum torque 94.61 400 15 15895/168 6000
400 Nm 86.31 400 16 1122/13 6000
81.63 400 17 10285/126 6000
74.46 400 19 968/13 6000
71.24 400 20 1496/21 6000
64.98 400 22 4224/65 6000
52.27 400 27 8415/161 6000
47.68 400 29 14256/299 6000

Legend see page 279

282 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
F042 75.79 5000 3000
69.14 5000 3000
61.98 5000 3000
56.54 5000 3000
48.94 5000 3000
44.64 5000 3000
41.20 5000 3000
37.95 5000 3000
34.62 5000 3000

F
33.69 5000 3000
31.06 5000 3000
28.33 5000 3000
26.60 5000 3000
23.91 5000 3000
21.81 5000 3000
20.63 5000 3000
18.06 4900 3000
16.88 5000 3000
16.48 4900 3000
14.78 4300 3000
13.48 4300 3000
12.99 5000 3000
11.99 3800 3000
10.93 3800 3000
10.03 3400 3000
9.82 4900 3000
9.15 3400 3000
8.13 3000 3000
8.03 4300 3000
7.84 2900 -
7.42 3000 3000
7.15 2900 -
6.52 3800 3000
5.45 3400 3000
4.42 3000 3000
4.26 2900 -
F043 422.98 5000 -
385.85 5000 -
329.48 5000 3000
300.55 5000 3000
267.14 5000 3000
243.69 5000 3000
210.48 5000 3000
192.00 5000 3000
162.19 5000 3000
147.96 5000 3000
126.72 5000 3000
115.60 5000 3000
94.61 5000 3000
86.31 5000 3000
81.63 5000 3000
74.46 5000 3000
71.24 4900 3000
64.98 4900 3000
52.27 4300 3000
47.68 4300 3000

Legend see page 279

www.weg.net Gear Units and Geared Motors 283

 IEC motor frame size

63 71 80 90 100 112 132 - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 - - - - - -

NEMA adapter

N213/
N56 N143/145 N182 N184 - - - - - -
[Nm] [min-1] [min-1] 215
F052 87.38 371 16 5243/60 6000
79.84 339 18 10379/130 6000
71.46 501 20 1715/24 6000
65.29 457 21 3395/52 6000
56.42 600 25 1862/33 6000
51.55 597 27 7372/143 6000
48.15 204 29 963/20 6000
43.75 600 32 175/4 6000
39.97 597 35 7275/182 6000

F
39.38 276 36 315/8 6000
35.81 600 39 931/26 6000
32.72 597 43 5529/169 6000
31.09 360 45 342/11 6000
27.56 600 51 441/16 6000
25.18 597 56 2619/104 6000
2 stages 24.11 360 58 675/28 6000
20.83 600 67 833/40 6000
19.73 360 71 513/26 6000
n1=1400 min-1
19.03 597 74 4947/260 6000
17.04 600 82 392/23 6000
Maximum torque 15.57 597 90 4656/299 6000
600 Nm 15.19 360 92 243/16 6000
13.82 600 101 539/39 6000
12.63 597 111 2134/169 6000
11.57 600 121 833/72 5600
11.48 360 122 459/40 6000
10.57 584 132 1649/156 5600
9.39 360 149 216/23 6000
9.38 564 149 1519/162 5000
9.04 558 155 217/24 4800
8.57 549 163 3007/351 5000
8.26 543 169 3007/364 4800
7.62 360 184 99/13 6000
6.38 360 220 51/8 5600
5.17 360 271 31/6 5000
4.98 360 281 279/56 4800
F053 487.67 600 2.9 1463/3 6000
445.56 597 3.1 40546/91 6000
379.87 600 3.7 5698/15 6000
347.07 597 4.0 157916/455 6000
308.00 600 4.5 308/1 6000
281.41 597 5.0 25608/91 6000
242.67 600 5.8 728/3 6000
3 stages 221.71 597 6.3 1552/7 6000
187.00 600 7.5 187/1 6000
170.85 597 8.2 108834/637 6000
n1=1400 min-1
146.10 600 9.6 5698/39 6000
133.49 597 10 157916/1183 6000
Maximum torque 109.08 600 13 1309/12 6000
600 Nm 99.66 597 14 18139/182 6000
94.11 600 15 847/9 6000
85.99 597 16 23474/273 6000
82.13 600 17 1232/15 6000
75.04 597 19 34144/455 6000
60.26 600 23 1386/23 6000
55.06 597 25 115236/2093 6000

Legend see page 279

284 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
F052 87.38 5000 3000
79.84 5000 3000
71.46 5000 3000
65.29 5000 3000
56.42 5000 3000
51.55 5000 3000
48.15 5000 3000
43.75 5000 3000
39.97 5000 3000

F
39.38 5000 3000
35.81 5000 3000
32.72 5000 3000
31.09 5000 3000
27.56 5000 3000
25.18 5000 3000
24.11 5000 3000
20.83 5000 3000
19.73 5000 3000
19.03 5000 3000
17.04 4600 3000
15.57 4600 3000
15.19 5000 3000
13.82 4100 3000
12.63 4100 3000
11.57 3700 3000
11.48 5000 3000
10.57 3700 3000
9.39 4600 3000
9.38 3300 3000
9.04 3200 3000
8.57 3300 3000
8.26 3200 3000
7.62 4100 3000
6.38 3700 3000
5.17 3300 3000
4.98 3200 3000
F053 487.67 5000 -
445.56 5000 -
379.87 5000 3000
347.07 5000 3000
308.00 5000 3000
281.41 5000 3000
242.67 5000 3000
221.71 5000 3000
187.00 5000 3000
170.85 5000 3000
146.10 5000 3000
133.49 5000 3000
109.08 5000 3000
99.66 5000 3000
94.11 5000 3000
85.99 5000 3000
82.13 5000 3000
75.04 5000 3000
60.26 4600 3000
55.06 4600 3000

Legend see page 279

www.weg.net Gear Units and Geared Motors 285

 IEC motor frame size

63 71 80 90 100 112 132 160 - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 - - - - - -

NEMA adapter

N213/
N56 N143/145 N182 N184 - - - - - -
[Nm] [min-1] [min-1] 215
F062 49.67 820 28 4520/91 6000
45.55 820 31 8927/196 6000
41.66 820 34 7040/169 6000
38.20 820 37 3476/91 6000
32.69 820 43 425/13 6000
29.98 820 47 6715/224 6000
25.23 820 55 328/13 6000
23.14 820 61 3239/140 6000
20.87 820 67 480/23 6000

F
20.49 422 68 3729/182 6000
19.14 820 73 3081/161 6000
17.75 820 79 3000/169 6000
2 stages 17.18 571 81 2904/169 6000
16.28 820 86 5925/364 6000
15.38 820 91 200/13 5600 *
n1=1400 min-1
14.11 820 99 395/28 5600 *
13.49 571 104 2805/208 6000
Maximum torque 12.99 820 108 1520/117 5000 *
820 Nm 12.53 820 112 1140/91 4800
11.91 820 118 1501/126 5000 *
11.49 820 122 4503/392 4800
10.70 820 131 3200/299 4400 *
10.41 571 135 1353/130 6000
9.81 820 143 1580/161 4400 *
8.61 571 163 198/23 6000
7.32 571 191 2475/338 6000
6.35 571 221 165/26 5600 *
5.36 571 261 209/39 5000 *
5.17 571 271 1881/364 4800
4.41 571 317 1320/299 4400 *
F063 412.64 820 3.4 80464/195 6000
378.37 820 3.7 397291/1050 6000
337.44 820 4.1 13160/39 6000
309.42 820 4.5 3713/12 6000
266.44 820 5.3 114304/429 6000
244.32 820 5.7 282188/1155 6000
206.59 820 6.8 18800/91 6000
3 stages 189.44 820 7.4 18565/98 6000
169.09 820 8.3 28576/169 6000
155.05 820 9.0 70547/455 6000
n1=1400 min-1
130.15 820 11 1692/13 6000
119.35 820 12 33417/280 6000
Maximum torque 98.34 820 14 6392/65 6000
820 Nm 90.17 820 16 63121/700 6000
80.48 820 17 24064/299 6000
73.80 820 19 59408/805 6000
65.26 820 21 33088/507 6000
59.84 820 23 81686/1365 6000
54.63 820 26 6392/117 5600
50.10 820 28 63121/1260 5600

* Only direct mounting of motor possible

Legend see page 279

286 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
F062 49.67 5000 2500
45.55 5000 2500
41.66 5000 2500
38.20 5000 2500
32.69 5000 2500
29.98 5000 2500
25.23 5000 2500
23.14 5000 2500
20.87 4900 2500

F
20.49 5000 2500
19.14 4900 2500
17.75 4300 2500
17.18 5000 2500
16.28 4300 2500
15.38 3900 2500
14.11 3900 2500
13.49 5000 2500
12.99 3500 2500
12.53 3300 2500
11.91 3500 2500
11.49 3300 2500
10.70 3000 2500
10.41 5000 2500
9.81 3000 2500
8.61 4900 2500
7.32 4300 2500
6.35 3900 2500
5.36 3500 2500
5.17 3300 2500
4.41 3000 2500
F063 412.64 5000 3000
378.37 5000 3000
337.44 5000 3000
309.42 5000 3000
266.44 5000 3000
244.32 5000 3000
206.59 5000 2500
189.44 5000 2500
169.09 5000 2500
155.05 5000 2500
130.15 5000 2500
119.35 5000 2500
98.34 5000 2500
90.17 5000 2500
80.48 4900 2500
73.80 4900 2500
65.26 4300 2500
59.84 4300 2500
54.63 3900 2500
50.10 3900 2500

Legend see page 279

www.weg.net Gear Units and Geared Motors 287

 IEC motor frame size

63 71 80 90 100 112 132 160 - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 - - - - - -

NEMA adapter

N213/
N56 N143/145 N182 N184 - - - - - -
[Nm] [min-1] [min-1] 215
F072 45.02 1500 31 5763/128 6000
39.31 1500 36 629/16 6000
34.74 1500 40 5559/160 6000
29.38 1500 48 2703/92 6000
25.25 1500 55 5253/208 6000
22.05 1500 64 1411/64 5600 *
20.72 939 68 1243/60 6000
18.89 1500 74 170/9 5000 *
18.21 1500 77 255/14 4800

F 2 stages 18.09 1103 77 814/45 6000

16.08 1500 87 1479/92 4400 *
15.99 1094 88 1199/75 6000
n1=1400 min-1
13.52 1103 104 4664/345 6000
13.49 1500 104 2805/208 3900 *
Maximum torque 11.62 1085 120 2266/195 6000
1500 Nm 11.36 1500 123 2091/184 3500 *
10.14 1115 138 913/90 5600 *
9.32 1500 150 969/104 3100 *
8.69 1115 161 704/81 5000 *
8.38 1006 167 176/21 4800
7.40 1115 189 2552/345 4400 *
6.21 1115 226 242/39 3900 *
5.23 1115 268 1804/345 3500 *
4.29 1081 327 836/195 3100 *
F073 385.37 1500 3.6 61659/160 6000
305.42 1500 4.6 26877/88 6000
237.15 1500 5.9 4743/20 6000
3 stages
194.58 1500 7.2 12648/65 6000
150.69 1500 9.3 96441/640 6000
n1=1400 min-1 114.62 1500 12 45849/400 6000
94.52 1500 15 17391/184 6000
77.53 1500 18 80631/1040 6000
Maximum torque
65.88 1500 21 527/8 5600
1500 Nm
54.16 1500 26 19499/360 5000
52.23 1500 27 58497/1120 4800

* Only direct mounting of motor possible

Legend see page 279

288 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
F072 45.02 5000 2500
39.31 5000 2500
34.74 5000 2500
29.38 5000 2500
25.25 4800 2500
22.05 4300 2500
20.72 5000 2500
18.89 3800 2500
18.21 3700 2500

F
18.09 5000 2500
16.08 3400 2500
15.99 5000 2500
13.52 5000 2500
13.49 3000 2500
11.62 4800 2500
11.36 2700 2500
10.14 4300 2500
9.32 - 2400
8.69 3800 2500
8.38 3700 2500
7.40 3400 2500
6.21 3000 2500
5.23 2700 2500
4.29 - 2400
F073 385.37 5000 3000
305.42 5000 3000
237.15 5000 2500
194.58 5000 2500
150.69 5000 2500
114.62 5000 2500
94.52 5000 2500
77.53 4800 2500
65.88 4300 2500
54.16 3800 2500
52.23 3700 2500

Legend see page 279

www.weg.net Gear Units and Geared Motors 289

 IEC motor frame size

63 71 80 90 100 112 132 160 180 - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 I180 - - - -

NEMA adapter

N213/ N254/ N284/

N56 N143/145 N182 N184 - - - -
[Nm] [min-1] [min-1] 215 256 286
F082 33.87 2785 41 6165/182 6000
30.00 3000 47 30/1 5600
25.95 3000 54 545/21 5000
22.08 3000 63 3555/161 4400
18.79 3000 75 1710/91 3900
16.21 3000 86 2610/161 3500
2 stages 16.01 1647 87 10823/676 6000
14.18 1762 99 553/39 5600
13.60 3000 103 2475/182 3100
n1=1400 min-1
F
12.27 1762 114 8611/702 5000
11.06 3000 127 387/35 2700
Maximum torque 10.44 1762 134 6241/598 4400
3000 Nm 8.88 1762 158 1501/169 3900
8.65 3000 162 1755/203 2300
7.66 1762 183 2291/299 3500
6.43 1762 218 4345/676 3100
5.23 1762 268 3397/650 2700
4.09 1564 343 237/58 2300
F083 358.52 3000 3.9 32625/91 6000
283.76 3000 4.9 127125/448 6000
247.77 3000 5.7 13875/56 6000
218.97 3000 6.4 24525/112 6000
185.17 3000 7.6 59625/322 6000
180.28 3000 7.8 114840/637 6000
159.17 3000 8.8 115875/728 6000
142.69 3000 9.8 55935/392 6000
138.95 3000 10 31125/224 5600
124.59 3000 11 6105/49 6000
3 stages 119.05 3000 12 2500/21 5000
114.80 3000 12 5625/49 4800
110.11 3000 13 10791/98 6000
n1=1400 min-1
101.32 3000 14 32625/322 4400
93.11 3000 15 104940/1127 6000
Maximum torque 84.99 3000 16 61875/728 3900
3000 Nm 80.04 3000 17 50985/637 6000
71.62 2947 20 46125/644 3500
69.87 2903 20 13695/196 5600
59.86 2771 23 8800/147 5000
58.72 2777 24 21375/364 3100
57.73 2741 24 19800/343 4800
50.95 2640 27 57420/1127 4400
42.74 2505 33 27225/637 3900
36.02 2379 39 40590/1127 3500
29.53 2242 47 18810/637 3100

Legend see page 279

290 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
F082 33.87 5000 2500
30.00 4500 2500
25.95 4000 2500
22.08 3600 2500
18.79 3100 2500
16.21 2800 2500
16.01 5000 2500
14.18 4500 2500
13.60 - 2500

F
12.27 4000 2500
11.06 - 2200
10.44 3600 2500
8.88 3100 2500
8.65 - 1900
7.66 2800 2500
6.43 - 2500
5.23 - 2200
4.09 - 1900
F083 358.52 5000 2500
283.76 5000 2500
247.77 5000 2500
218.97 5000 2500
185.17 5000 2500
180.28 5000 2500
159.17 5000 2500
142.69 5000 2500
138.95 4500 2500
124.59 5000 2500
119.05 4000 2500
114.80 3900 2500
110.11 5000 2500
101.32 3600 2500
93.11 5000 2500
84.99 3100 2500
80.04 5000 2500
71.62 2800 2500
69.87 4500 2500
59.86 4000 2500
58.72 - 2500
57.73 3900 2500
50.95 3600 2500
42.74 3100 2500
36.02 2800 2500
29.53 - 2500

Legend see page 279

www.weg.net Gear Units and Geared Motors 291

 IEC motor frame size

63 71 80 90 100 112 132 - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 - - - - - -

NEMA adapter

N213/
N56 N143/145 N182 N184 - - - - - -
[Nm] [min-1] [min-1] 215
F084 3836.13 3000 0.36 698175/182 6000
3137.02 3000 0.45 163125/52 6000
3036.24 3000 0.46 2720475/896 6000
2651.12 3000 0.53 296925/112 6000
2482.91 3000 0.56 635625/256 6000
2477.02 3000 0.57 2479500/1001 6000
2167.97 3000 0.65 69375/32 6000
1960.53 3000 0.71 2415375/1232 6000
1920.62 3000 0.73 2446875/1274 6000

F 1711.85
1571.96
3000
3000
0.82
0.89
263625/154
1859625/1183
6000
6000
1520.15 3000 0.92 9534375/6272 6000
1327.33 3000 1.1 1040625/784 6000
1244.18 3000 1.1 7246125/5824 6000
1209.99 3000 1.2 880875/728 6000
4 stages 1086.37 3000 1.3 790875/728 6000
957.69 3000 1.5 3432375/3584 6000
914.22 3000 1.5 332775/364 6000
n1=1400 min-1
836.22 3000 1.7 374625/448 6000
748.21 3000 1.9 1566000/2093 6000
Maximum torque 723.59 3000 1.9 1296675/1792 6000
3000 Nm 631.81 3000 2.2 141525/224 6000
606.72 3000 2.3 717750/1183 6000
592.20 3000 2.4 381375/644 6000
517.08 3000 2.7 83250/161 6000
507.90 3000 2.8 184875/364 5600
480.21 3000 2.9 1398375/2912 6000
419.30 3000 3.3 152625/364 6000
411.63 3000 3.4 112375/273 5000
401.99 3000 3.5 720375/1792 5600
396.93 3000 3.5 1011375/2548 4800
351.00 3000 4.0 78625/224 5600
325.80 3000 4.3 437875/1344 5000
314.16 3000 4.5 3940875/12544 4800
284.47 3000 4.9 143375/504 5000
274.31 3000 5.1 430125/1568 4800

Legend see page 279

292 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
F084 3836.13 5000 3000
3137.02 5000 3000
3036.24 5000 3000
2651.12 5000 3000
2482.91 5000 3000
2477.02 5000 3000
2167.97 5000 3000
1960.53 5000 3000
1920.62 5000 3000

F
1711.85 5000 3000
1571.96 5000 3000
1520.15 5000 3000
1327.33 5000 3000
1244.18 5000 3000
1209.99 5000 3000
1086.37 5000 3000
957.69 5000 3000
914.22 5000 3000
836.22 5000 3000
748.21 5000 3000
723.59 5000 3000
631.81 5000 3000
606.72 5000 3000
592.20 5000 3000
517.08 5000 3000
507.90 4500 3000
480.21 5000 3000
419.30 5000 3000
411.63 4000 3000
401.99 4500 3000
396.93 3900 3000
351.00 4500 3000
325.80 4000 3000
314.16 3900 3000
284.47 4000 3000
274.31 3900 3000

Legend see page 279

www.weg.net Gear Units and Geared Motors 293

 IEC motor frame size

63 71 80 90 100 112 132 160 180 200 - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 I180 - - - -

NEMA adapter

N213/ N254/ N284/

N56 N143/145 N182 N184 - - - -
[Nm] [min-1] [min-1] 215 256 286
F092 38.65 4326 36 2512/65 6000
34.13 4500 41 512/15 5600
29.63 4500 47 800/27 5000
28.57 3430 49 200/7 4800
25.60 4500 55 128/5 4400
21.91 4500 64 1424/65 3900 *
19.01 2128 74 13345/702 6000
18.92 4500 74 2176/115 3500 *
2 stages 16.79 2676 83 1360/81 5600

F
16.00 4500 88 16/1 3100 *
14.57 2676 96 10625/729 5000
n1=1400 min -1
14.05 1687 100 10625/756 4800
13.06 4500 107 1632/125 2700 *
Maximum torque 12.59 2676 111 340/27 4400
4500 Nm 10.78 2676 130 7565/702 3900 *
10.59 4500 132 1536/145 2300 *
9.31 2676 150 5780/621 3500 *
8.46 4006 166 296/35 2100 *
7.87 2676 178 425/54 3100 *
6.42 2676 218 289/45 2700 *
5.21 2577 269 1360/261 2300 *
4.16 2284 337 3145/756 2100 *
F093 288.50 4500 4.9 165888/575 6000
243.90 4500 5.7 129024/529 6000
211.14 4500 6.6 315648/1495 6000
186.99 4500 7.5 21504/115 5600
161.76 4500 8.7 55808/345 5000
155.99 4500 9.0 125568/805 4800
142.85 4500 9.8 17856/125 6000
137.63 4500 10 364032/2645 4400
120.77 4500 12 13888/115 6000
3 stages 117.13 4500 12 175104/1495 3900
104.54 4500 13 33976/325 6000
101.04 4500 14 267264/2645 3500
n1=1400 min-1
92.59 4500 15 6944/75 5600
84.76 4500 17 25344/299 3100
Maximum torque 80.09 4500 17 54064/675 5000
4500 Nm 77.23 4500 18 13516/175 4800
68.92 4500 20 198144/2875 2700
68.15 4500 21 39184/575 4400
57.99 4500 24 18848/325 3900
53.89 4500 26 179712/3335 2300
50.03 4500 28 28768/575 3500
41.97 4458 33 2728/65 3100
34.12 4189 41 21328/625 2700
26.68 3891 52 19344/725 2300

* Only direct mounting of motor possible

Legend see page 279

294 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
F092 38.65 5000 2500
34.13 4800 2500
29.63 4200 2500
28.57 4100 2500
25.60 3700 2500
21.91 3300 2500
19.01 5000 2500
18.92 3000 2500
16.79 4800 2500

F
16.00 - 2500
14.57 4200 2500
14.05 4100 2500
13.06 - 2300
12.59 3700 2500
10.78 3300 2500
10.59 - 2000
9.31 3000 2500
8.46 - 1800
7.87 - 2500
6.42 - 2300
5.21 - 2000
4.16 - 1800
F093 288.50 5000 2500
243.90 5000 2500
211.14 5000 2500
186.99 4800 2500
161.76 4200 2500
155.99 4100 2500
142.85 5000 2500
137.63 3700 2500
120.77 5000 2500
117.13 3300 2500
104.54 5000 2500
101.04 3000 2500
92.59 4800 2500
84.76 - 2500
80.09 4200 2500
77.23 4100 2500
68.92 - 2300
68.15 3700 2500
57.99 3300 2500
53.89 - 2000
50.03 3000 2500
41.97 - 2500
34.12 - 2300
26.68 - 2000

Legend see page 279

www.weg.net Gear Units and Geared Motors 295

 IEC motor frame size

63 71 80 90 100 112 132 - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 - - - - - -

NEMA adapter

N213/
N56 N143/145 N182 N184 - - - - - -
[Nm] [min-1] [min-1] 215
F094 3086.96 4500 0.45 8875008/2875 6000
2609.75 4500 0.54 6902784/2645 6000
2524.38 4500 0.55 290304/115 6000
2134.14 4500 0.66 1128960/529 6000
1993.28 4500 0.70 12607488/6325 6000
1685.14 4500 0.83 9805824/5819 6000
1545.54 4500 0.91 248832/161 6000
1306.62 4500 1.1 691200/529 6000
1264.97 4500 1.1 9455616/7475 6000

F 4 stages 1069.42
973.69
4500
4500
1.3
1.4
7354368/6877
559872/575
6000
6000
823.17 4500 1.7 435456/529 6000
n1=1400 min-1
735.68 4500 1.9 2115072/2875 6000
621.95 4500 2.3 1645056/2645 6000
Maximum torque 602.09 4500 2.3 7962624/13225 6000
4500 Nm 509.01 4500 2.8 6193152/12167 6000
488.23 4500 2.9 3649536/7475 6000
412.76 4500 3.4 2838528/6877 6000
408.71 4500 3.4 235008/575 5600
345.53 4500 4.1 182784/529 5600
331.24 4500 4.2 190464/575 5000
319.41 4500 4.4 1285632/4025 4800
280.04 4500 5.0 444416/1587 5000
270.03 4500 5.2 142848/529 4800

Legend see page 279

296 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
F094 3086.96 5000 3000
2609.75 5000 3000
2524.38 5000 3000
2134.14 5000 3000
1993.28 5000 3000
1685.14 5000 3000
1545.54 5000 3000
1306.62 5000 3000
1264.97 5000 3000

F
1069.42 5000 3000
973.69 5000 3000
823.17 5000 3000
735.68 5000 3000
621.95 5000 3000
602.09 5000 3000
509.01 5000 3000
488.23 5000 3000
412.76 5000 3000
408.71 4800 3000
345.53 4800 3000
331.24 4200 3000
319.41 4100 3000
280.04 4200 3000
270.03 4100 3000

Legend see page 279

www.weg.net Gear Units and Geared Motors 297

 IEC motor frame size

63 71 80 90 100 112 132 160 180 200 225 - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 I225 - -

NEMA adapter

N213/ N254/ N284/ N324/

N56 N143/145 N182 N184 N364 - -
[Nm] [min-1] [min-1] 215 256 286 326
F102 42.74 6409 33 7693/180 5600
37.26 7082 38 15092/405 5000
35.93 4312 39 539/15 4800
32.10 8000 44 11074/345 4400
27.64 8000 51 1078/39 3900
24.14 8000 58 1666/69 3500
22.14 3320 63 1727/78 5600
20.86 8000 67 4067/195 3100
19.30 3669 73 6776/351 5000

F 2 stages 18.62 2234 75 242/13 4800

17.25 8000 81 2156/125 2700
16.63 4820 84 4972/299 4400
n1=1400 min-1
14.32 5348 98 2420/169 3900
14.19 8000 99 2058/145 2300
Maximum torque 12.51 5415 112 3740/299 3500
8000 Nm 11.67 7875 120 35/3 2100
10.80 5415 130 1826/169 3100
9.91 7609 141 4606/465 1900
8.94 5415 157 2904/325 2700
8.45 7361 166 2156/255 1800
7.35 5415 190 2772/377 2300
6.04 5415 232 550/91 2100
5.13 5415 273 2068/403 1900
4.38 5415 320 968/221 1800
F103 246.57 8000 5.7 38465/156 6000
217.78 8000 6.4 1960/9 5600
189.04 8000 7.4 30625/162 5000
182.29 8000 7.7 4375/24 4800
163.33 8000 8.6 490/3 4400
139.78 8000 10 21805/156 3900
122.58 8000 11 31871/260 6000
120.72 8000 12 8330/69 3500
3 stages 108.27 8000 13 1624/15 5600
102.08 8000 14 1225/12 3100
93.98 8000 15 5075/54 5000
n1=1400 min-1
90.63 8000 15 725/8 4800
83.30 8000 17 833/10 2700
Maximum torque 81.20 8000 17 406/5 4400
8000 Nm 69.49 8000 20 18067/260 3900
67.59 8000 21 1960/29 2300
60.02 8000 23 6902/115 3500
53.96 8000 26 1295/24 2100
50.75 8000 28 203/4 3100
41.41 8000 34 10353/250 2700
33.60 7876 42 168/5 2300
26.83 7361 52 1073/40 2100

Legend see page 279

298 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
F102 42.74 5000 2500
37.26 4900 2500
35.93 4700 2500
32.10 4300 2500
27.64 3800 2500
24.14 3400 1800
22.14 5000 2500
20.86 - 1800
19.30 4900 2500

F
18.62 4700 2500
17.25 - 1800
16.63 4300 2500
14.32 3800 2500
14.19 - 1800
12.51 3400 1800
11.67 - 1800
10.80 - 1800
9.91 - 1800
8.94 - 1800
8.45 - 1700
7.35 - 1800
6.04 - 1800
5.13 - 1800
4.38 - 1700
F103 246.57 5000 2500
217.78 5000 2500
189.04 4500 2500
182.29 4400 2500
163.33 4000 2500
139.78 3500 2500
122.58 5000 2500
120.72 3200 1800
108.27 5000 2500
102.08 - 1800
93.98 4500 2500
90.63 4400 2500
83.30 - 1800
81.20 4000 2500
69.49 3500 2500
67.59 - 1800
60.02 3200 1800
53.96 - 1800
50.75 - 1800
41.41 - 1800
33.60 - 1800
26.83 - 1800

Legend see page 279

www.weg.net Gear Units and Geared Motors 299

 IEC motor frame size

63 71 80 90 100 112 132 160 - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 - - - - -

NEMA adapter

N213/ N254/
N56 N143/145 N182 N184 - - - - -
[Nm] [min-1] [min-1] 215 256
F104 2276.77 8000 0.61 225400/99 6000
1976.36 8000 0.71 3521875/1782 6000
1757.78 8000 0.80 15820/9 6000
1707.58 8000 0.82 56350/33 6000
1525.85 8000 0.92 494375/324 6000
1474.19 8000 0.95 172480/117 6000
1318.33 8000 1.1 3955/3 6000
1279.68 8000 1.1 1347500/1053 6000
1156.94 8000 1.2 20825/18 6000

F 1105.64
1004.29
8000
8000
1.3
1.4
43120/39
2603125/2592
6000
6000
892.89 8000 1.6 8036/9 6000
867.71 8000 1.6 20825/24 6000
775.08 8000 1.8 251125/324 6000
4 stages
738.55 8000 1.9 50960/69 6000
669.67 8000 2.1 2009/3 6000
n1=1400 min-1 641.10 8000 2.2 398125/621 6000
628.21 8000 2.2 24500/39 6000
553.91 8000 2.5 12740/23 6000
Maximum torque
545.32 8000 2.6 765625/1404 6000
8000 Nm
544.44 8000 2.6 4900/9 5600
472.61 8000 3.0 153125/324 5600
471.15 8000 3.0 6125/13 6000
459.75 8000 3.0 37240/81 5000
443.33 8000 3.2 1330/3 4800
408.33 8000 3.4 1225/3 5600
399.09 8000 3.5 581875/1458 5000
384.84 8000 3.6 83125/216 4800
378.74 8000 3.7 78400/207 4400
344.81 8000 4.1 9310/27 5000
332.50 8000 4.2 665/2 4800
328.77 8000 4.3 612500/1863 4400
284.06 8000 4.9 19600/69 4400

Legend see page 279

300 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
F104 2276.77 5000 3000
1976.36 5000 3000
1757.78 5000 2500
1707.58 5000 3000
1525.85 5000 2500
1474.19 5000 2500
1318.33 5000 2500
1279.68 5000 2500
1156.94 5000 2500

F
1105.64 5000 2500
1004.29 5000 2500
892.89 5000 2500
867.71 5000 2500
775.08 5000 2500
738.55 5000 2500
669.67 5000 2500
641.10 5000 2500
628.21 5000 2500
553.91 5000 2500
545.32 5000 2500
544.44 5000 2500
472.61 5000 2500
471.15 5000 2500
459.75 4500 2500
443.33 4400 2500
408.33 5000 2500
399.09 4500 2500
384.84 4400 2500
378.74 4000 2500
344.81 4500 2500
332.50 4400 2500
328.77 4000 2500
284.06 4000 2500

Legend see page 279

www.weg.net Gear Units and Geared Motors 301

 IEC motor frame size

63 71 80 90 100 112 132 160 180 200 225 - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 I225 I250 -

NEMA adapter

N213/ N254/ N284/ N324/

N56 N143/145 N182 N184 N364 - -
[Nm] [min-1] [min-1] 215 256 286 326
F122 39.98 7597 35 16192/405 5000
34.43 9985 41 792/23 4400
29.78 12543 47 1936/65 3900
26.27 13000 53 9064/345 3500 *
22.56 12916 62 880/39 3100 *
19.18 3645 73 13984/729 5000
18.77 12365 75 1408/75 2700 *
2 stages 16.52 4791 85 380/23 4400
15.58 11830 90 6776/435 2300 *

F
14.29 6018 98 1672/117 3900
n1=1400 min-1
12.99 11332 108 1364/105 2100 *
12.61 7319 111 7828/621 3500 *
Maximum torque 11.17 10933 125 5192/465 1900 *
13000 Nm 10.83 7209 129 3800/351 3100 *
9.66 10565 145 2464/255 1800 *
9.01 8163 155 1216/135 2700 *
7.47 8093 187 5852/783 2300 *
6.23 8163 225 1178/189 2100 *
5.36 8163 261 4484/837 1900 *
4.64 7647 302 2128/459 1800 *
F123 220.67 13000 6.3 39721/180 5600
192.40 13000 7.3 77924/405 5000
185.53 13000 7.5 2783/15 4800
165.73 13000 8.4 2486/15 4400
142.72 13000 9.8 5566/39 3900
124.67 13000 11 374/3 3500 *
120.82 13000 12 29359/243 5600
107.69 13000 13 20999/195 3100 *
105.34 13000 13 230384/2187 5000
3 stages 101.58 12190 14 8228/81 4800
90.74 13000 15 169048/1863 4400
89.06 13000 16 11132/125 2700 *
n1=1400 min-1
78.14 13000 18 82280/1053 3900
73.28 13000 19 10626/145 2300 *
Maximum torque 68.26 13000 21 127160/1863 3500 *
13000 Nm 60.24 13000 23 1265/21 2100 *
58.96 12929 24 62084/1053 3100 *
51.14 12609 27 23782/465 1900 *
48.76 12213 29 32912/675 2700 *
43.65 12024 32 11132/255 1800 *
40.12 11519 35 10472/261 2300 *
32.98 10861 42 18700/567 2100 *
28.00 10341 50 70312/2511 1900 *
23.90 9861 59 1936/81 1800 *

* I250 only. Direct mounting of the motor not possible

Legend see page 279

302 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
F122 39.98 5000 2500
34.43 4500 2500
29.78 4000 2500
26.27 3600 1800
22.56 - 1800
19.18 5000 2500
18.77 - 1800
16.52 4500 2500
15.58 - 1800

F
14.29 4000 2500
12.99 - 1800
12.61 3600 1800
11.17 - 1800
10.83 - 1800
9.66 - 1800
9.01 - 1800
7.47 - 1800
6.23 - 1800
5.36 - 1800
4.64 - 1800
F123 220.67 5000 2500
192.40 5000 2500
185.53 5000 2500
165.73 4500 2500
142.72 4000 2500
124.67 3600 1800
120.82 5000 2500
107.69 - 1800
105.34 5000 2500
101.58 5000 2500
90.74 4500 2500
89.06 - 1800
78.14 4000 2500
73.28 - 1800
68.26 3600 1800
60.24 - 1800
58.96 - 1800
51.14 - 1800
48.76 - 1800
43.65 - 1800
40.12 - 1800
32.98 - 1800
28.00 - 1800
23.90 - 1800

Legend see page 279

www.weg.net Gear Units and Geared Motors 303

 IEC motor frame size

63 71 80 90 100 112 132 160 - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 - - - - -

NEMA adapter

N213/ N254/
N56 N143/145 N182 N184 - - - - -
[Nm] [min-1] [min-1] 215 256
F124 2307.03 13000 0.61 83053/36 6000
2011.51 13000 0.70 162932/81 6000
1781.14 13000 0.79 4488473/2520 6000
1732.67 13000 0.81 5198/3 6000
1552.98 13000 0.90 628958/405 6000
1493.78 13000 0.94 873862/585 6000
1492.05 13000 0.94 58190/39 6000
1337.70 13000 1.0 140459/105 6000
1302.43 13000 1.1 6857312/5265 6000

F 1172.32
1151.94
13000
13000
1.2
1.2
675257/576
314479/273
6000
6000
1121.89 13000 1.2 218768/195 6000
1022.15 13000 1.4 331177/324 6000
966.09 13000 1.4 489808/507 6000
904.76 13000 1.5 1628561/1800 6000
880.46 13000 1.6 21131/24 6000
788.86 13000 1.8 1597442/2025 6000
758.19 13000 1.8 236555/312 6000
748.37 13000 1.9 22451/30 6000
4 stages 679.51 13000 2.1 50963/75 6000
652.50 13000 2.1 88088/135 6000
636.55 13000 2.2 198605/312 6000
n1=1400 min-1
585.14 13000 2.4 114103/195 6000
562.05 13000 2.5 64636/115 6000
Maximum torque 555.01 13000 2.5 194810/351 6000
13000 Nm 551.68 13000 2.5 39721/72 5600
484.00 13000 2.9 484/1 6000
481.01 13000 2.9 38962/81 5600
478.08 13000 2.9 6215/13 6000
465.86 13000 3.0 754699/1620 5000
449.23 13000 3.1 754699/1680 4800
414.33 13000 3.4 1243/3 5600
411.69 13000 3.4 69575/169 6000
406.19 13000 3.4 1480556/3645 5000
391.68 13000 3.6 52877/135 4800
383.78 13000 3.6 3454/9 4400
356.79 13000 3.9 13915/39 5600
349.88 13000 4.0 47234/135 5000
337.39 13000 4.1 23617/70 4800
334.62 13000 4.2 27104/81 4400
301.29 13000 4.6 105754/351 5000
290.53 13000 4.8 52877/182 4800
288.23 13000 4.9 19888/69 4400
248.21 13000 5.6 9680/39 4400

Legend see page 279

304 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
F124 2307.03 5000 3000
2011.51 5000 3000
1781.14 5000 2500
1732.67 5000 3000
1552.98 5000 2500
1493.78 5000 2500
1492.05 5000 3000
1337.70 5000 2500
1302.43 5000 2500

F
1172.32 5000 2500
1151.94 5000 2500
1121.89 5000 2500
1022.15 5000 2500
966.09 5000 2500
904.76 5000 2500
880.46 5000 2500
788.86 5000 2500
758.19 5000 2500
748.37 5000 2500
679.51 5000 2500
652.50 5000 2500
636.55 5000 2500
585.14 5000 2500
562.05 5000 2500
555.01 5000 2500
551.68 5000 2500
484.00 5000 2500
481.01 5000 2500
478.08 5000 2500
465.86 4800 2500
449.23 4600 2500
414.33 5000 2500
411.69 5000 2500
406.19 4800 2500
391.68 4600 2500
383.78 4200 2500
356.79 5000 2500
349.88 4800 2500
337.39 4600 2500
334.62 4200 2500
301.29 4800 2500
290.53 4600 2500
288.23 4200 2500
248.21 4200 2500

Legend see page 279

www.weg.net Gear Units and Geared Motors 305

 IEC motor frame size

63 71 80 90 100 112 132 160 180 200 225 - 280

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 I225 I250 I280

NEMA adapter

N213/ N254/ N284/ N324/

N56 N143/145 N182 N184 N364 - -
[Nm] [min-1] [min-1] 215 256 286 326
F152 36.54 15418 38 1023/28 3900
27.85 18000 50 10137/364 3100 *
23.38 18000 60 4092/175 2700 *
19.24 18000 73 558/29 2300 *
2 stages 17.35 7320 81 451/26 3900
16.37 18000 86 6417/392 2100 *
14.14 18000 99 99/7 1900 *
n1=1400 min -1
13.22 9805 106 4469/338 3100 *
12.31 18000 114 837/68 1800 *

F Maximum torque 11.10 11038 126 3608/325 2700 *

18000 Nm 9.14 10975 153 3444/377 2300 *
7.77 11038 180 2829/364 2100 *
6.71 11038 208 2706/403 1900 *
5.84 11038 240 2583/442 1800 *
F153 259.81 18000 5.4 5456/21 5000
223.77 18000 6.3 828630/3703 4400
193.55 18000 7.2 405108/2093 3900
170.73 18000 8.2 632214/3703 3500 * x
146.63 18000 9.5 306900/2093 3100 * x
144.52 18000 9.7 118358/819 5000
124.47 18000 11 1042065/8372 4400
3 stages 122.00 18000 11 98208/805 2700 * x
107.66 18000 13 254727/2366 3900
101.23 18000 14 67518/667 2300 * x
n1=1400 min-1
94.97 18000 15 795057/8372 3500 * x
84.42 18000 17 95139/1127 2100 * x
Maximum torque 81.56 18000 17 192975/2366 3100 * x
18000 Nm 72.56 18000 19 11682/161 1900 * x
67.86 18000 21 30876/455 2700 * x
62.79 18000 22 24552/391 1800 * x
56.31 18000 25 84909/1508 2300 * x
46.96 18000 30 239289/5096 2100 * x
40.36 18000 35 14691/364 1900 * x
34.93 18000 40 7719/221 1800 * x

* I250 only. Direct mounting of the motor not possible

x I280 only. Direct mounting of the motor not possible

Legend see page 279

306 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
F152 36.54 - 2500
27.85 - 1800
23.38 - 1800
19.24 - 1800
17.35 - 2500
16.37 - 1800
14.14 - 1800
13.22 - 1800
12.31 - 1800

F
11.10 - 1800
9.14 - 1800
7.77 - 1800
6.71 - 1800
5.84 - 1800
F153 259.81 - 2500
223.77 - 2500
193.55 - 2500
170.73 - 1800
146.63 - 1800
144.52 - 2500
124.47 - 2500
122.00 - 1800
107.66 - 2500
101.23 - 1800
94.97 - 1800
84.42 - 1800
81.56 - 1800
72.56 - 1800
67.86 - 1800
62.79 - 1800
56.31 - 1800
46.96 - 1800
40.36 - 1800
34.93 - 1800

Legend see page 279

www.weg.net Gear Units and Geared Motors 307

 IEC motor frame size

63 71 80 90 100 112 132 160 180 200 - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 - - -

NEMA adapter

N213/ N254/ N284/ N324/

N56 N143/145 N182 N184 - - -
[Nm] [min-1] [min-1] 215 256 286 326
F154 2318.30 18000 0.60 632896/273 6000
1996.74 18000 0.70 96121080/48139 6000
1834.90 18000 0.76 38533/21 6000
1727.10 18000 0.81 46992528/27209 6000
1602.16 18000 0.87 100936/63 6000
1580.39 18000 0.89 46817595/29624 6000
1415.96 18000 0.99 148676/105 6000
1379.93 18000 1.0 5109885/3703 6000
1366.97 18000 1.0 11444301/8372 6000

F 1219.56
1197.38
18000
18000
1.1
1.2
9032067/7406
578336/483
6000
6000
1193.58 18000 1.2 2498166/2093 6000
1054.87 18000 1.3 11039193/10465 6000
1031.30 18000 1.4 87834780/85169 6000
1029.25 18000 1.4 280984/273 6000
898.51 18000 1.6 56606/63 5600
892.03 18000 1.6 42941448/48139 6000
4 stages
886.48 18000 1.6 42674445/48139 6000
773.88 18000 1.8 11462715/14812 5600
n1=1400 min-1 769.81 18000 1.8 436480/567 5000
766.77 18000 1.8 20863062/27209 6000
742.31 18000 1.9 109120/147 4800
Maximum torque
669.37 18000 2.1 2801997/4186 5600
18000 Nm
663.03 18000 2.1 2455200/3703 5000
655.17 18000 2.1 316448/483 4400
639.35 18000 2.2 16572600/25921 4800
573.49 18000 2.4 1200320/2093 5000
564.30 18000 2.5 48060540/85169 4400
553.01 18000 2.5 8102160/14651 4800
549.60 18000 2.5 150040/273 3900
488.09 18000 2.9 23496264/48139 4400
473.37 18000 3.0 22787325/48139 3900
463.14 18000 3.0 223696/483 3500
409.44 18000 3.4 11140470/27209 3900
398.90 18000 3.5 33973830/85169 3500
379.72 18000 3.7 103664/273 3100
345.03 18000 4.1 16609428/48139 3500
327.05 18000 4.3 15743970/48139 3100
282.89 18000 4.9 7697052/27209 3100

Legend see page 279

308 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
F154 2318.30 5000 2500
1996.74 5000 2500
1834.90 5000 2500
1727.10 5000 2500
1602.16 5000 2500
1580.39 5000 2500
1415.96 5000 2500
1379.93 5000 2500
1366.97 5000 2500

F
1219.56 5000 2500
1197.38 5000 2500
1193.58 5000 2500
1054.87 5000 2500
1031.30 5000 2500
1029.25 5000 2500
898.51 5000 2500
892.03 5000 2500
886.48 5000 2500
773.88 5000 2500
769.81 4900 2500
766.77 5000 2500
742.31 4700 2500
669.37 5000 2500
663.03 4900 2500
655.17 4300 2500
639.35 4700 2500
573.49 4900 2500
564.30 4300 2500
553.01 4700 2500
549.60 3800 2500
488.09 4300 2500
473.37 3800 2500
463.14 3500 2500
409.44 3800 2500
398.90 3500 2500
379.72 - 2500
345.03 3500 2500
327.05 - 2500
282.89 - 2500

Legend see page 279

www.weg.net Gear Units and Geared Motors 309

 IEC motor frame size

63 71 80 90 100 112 132 - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 - - - - - -

NEMA adapter

N213/
N56 N143/145 N182 N184 - - - - - -
[Nm] [min-1] [min-1] 215
F155 24805.81 18000 0.06 33859936/1365 6000
20285.13 18000 0.07 791120/39 6000
17143.10 18000 0.08 5400076/315 6000
16017.35 18000 0.09 4372736/273 6000
14018.89 18000 0.10 126170/9 6000
12419.47 18000 0.11 7911200/637 6000
11069.46 18000 0.13 697376/63 6000
10164.86 18000 0.14 12025024/1183 6000
8582.99 18000 0.16 1261700/147 6000

F 5 stages 7824.26
7024.85
18000
18000
0.18
0.20
712008/91
1917784/273
6000
6000
5911.67 18000 0.24 2689808/455 6000
n1=1400 min-1
5407.29 18000 0.26 37851/7 6000
4838.19 18000 0.29 10126336/2093 6000
Maximum torque 4085.50 18000 0.34 428978/105 6000
18000 Nm 3923.28 18000 0.36 13923712/3549 6000
3343.64 18000 0.42 1614976/483 6000
3284.26 18000 0.43 2689808/819 5600
2711.35 18000 0.52 2220592/819 6000
2661.75 18000 0.53 19619776/7371 5000
2566.69 18000 0.55 4904944/1911 4800
2269.72 18000 0.62 428978/189 5600
1839.52 18000 0.76 3129016/1701 5000
1773.82 18000 0.79 782254/441 4800

Legend see page 279

310 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
F155 24805.81 5000 3000
20285.13 5000 3000
17143.10 5000 3000
16017.35 5000 3000
14018.89 5000 3000
12419.47 5000 3000
11069.46 5000 3000
10164.86 5000 3000
8582.99 5000 3000

F
7824.26 5000 3000
7024.85 5000 3000
5911.67 5000 3000
5407.29 5000 3000
4838.19 5000 3000
4085.50 5000 3000
3923.28 5000 3000
3343.64 5000 3000
3284.26 5000 3000
2711.35 5000 3000
2661.75 4900 3000
2566.69 4700 3000
2269.72 5000 3000
1839.52 4900 3000
1773.82 4700 3000

Legend see page 279

www.weg.net Gear Units and Geared Motors 311

F

312 WG20 Gear Units and Geared Motors www.weg.net

Dimension sheets Geared Motors

F
www.weg.net WG20 Gear Units and Geared Motors 313
 FH02 - Hollow shaft

kB
k
105 LB1 AD
25 LB 10

Ø AC

14
Ø 14
140

223
94,8

M6 x 12

100
114
Ø 64
Ø 68 H7

31
2

62
0°
90

x9
F 2 M8 x 16 Ø

4
5 20,5 65
150
116,5

31 31 28,3
Ø 40

FD02 - Shrink disc *

8
Ø 25 H7

88 M10 x 40
104
Ø 25 h6

72

M10 2

Ø 60
FS02 - Output shaft 131,5
FB02 - Output shaft on both sides
Ø 25 H7

20 20
Ø 25
Ø 40

50 127
Ø 25 k6

3 5 40 8
+5 +5
20 0 20 0
28

DIN332 M10
127
Ø 25 h6

Ø 25 h6

21,5 65 M8 x 16
105,5

Motor fr.
63 71 80 L80 90S/L
Dimension
AC 126 141 159 159 178
AD 128 136 145 145 155
k 309 343 351 375 393
kB 353 392 409 433 466
LB 204 238 246 270 288
LB1 248 287 304 328 361

Motor dimension sheets see page 590. Description of motor lengths LB and LB1 see page 594.

314 WG20 Gear Units and Geared Motors www.weg.net

FO02 - B5 flange execution with hollow shaft

kB + 20
k + 20
125 LB1
LB AD

10
3,5

Ø AC

223
94,8
Ø 110 j6

4 x 90°
Ø 160

Z
Ø 64

0
Ø 13
15,5

20 116,5 Ø9 45° F
Z 150
Ø 75
Ø 58

3,5
20

FF02 - B5 flange execution with output shaft FP02 - B5 flange execution

with hollow shaft and shrink disc *

10 10
3,5 3,5
Ø 110 j6

Ø 110 j6
Ø 160

Ø 160

Ø 60

50 124,5 20 131,5

FT02 - Hollow shaft FU02 - Hollow shaft

with rubber buffer with shrink disc * and rubber buffer

25 25

56
28
M10
140

140

Ø10,5
Ø 34
Ø 25

1)
∆L=2
3 20
116,5 131,5
* Shrink disc only in combination with motor frame sizes 63 und 71
Dimensions in mm. Protection cap for shrink disc never possible 1) ΔL = recommended preload

www.weg.net WG20 Gear Units and Geared Motors 315

 FH03 - Hollow shaft

kB
k
115 LB1 AD
31,5 LB 12

Ø AC

18
Ø 14
158

108

252
M8 x 16

133
115
Ø 78
Ø 75 H7

31
1,5

76
°
60
6x
0
F 4
1,5
22,5 77
M8 x 16
Ø
10 30°
165
126,5

34 40 33,3
Ø 45

FD03 - Shrink disc *

8
Ø 30 H7

105 M10 x 40
120
Ø 30 h6

89

M10
1,5

Ø 78
FS03 - Output shaft
FB03 - Output shaft on both sides 155,5
Ø 30 H7

20 24
Ø 30
Ø 45

50 146
Ø 25 k6

1,5 5 40 8
+5 +5
20 0 24 0
28

M8 x 16 DIN332 M10
Ø 30 h6

Ø 30 h6

22,5 77 146

117,5

Motor fr.
63 71 80 L80 90S/L 100L L100L
Dimension
AC 126 141 159 159 178 199 199
AD 128 136 145 145 155 165 165
k 319 353 361 385 403 453 491
kB 363 402 419 443 476 537 575
LB 204 238 246 270 288 338 376
LB1 248 287 304 328 361 422 460

Motor dimension sheets see page 590. Description of motor lengths LB and LB1 see page 594.

316 WG20 Gear Units and Geared Motors www.weg.net

FO03 - B5 flange execution with hollow shaft

kB + 25
k + 25
140 LB1
LB AD

10
3,5

Ø AC
108

252
Ø 110 j6

4 x 90°
Ø 160

Z
Ø 78

0
Ø 13

45°
25 126,5
Z
Ø9
165
F
Ø 75

3,5
25

FF03 - B5 flange execution with output shaft FP03 - B5 flange execution

with hollow shaft and shrink disc *

10 10
3,5 3,5
Ø 110 j6

Ø 110 j6
Ø 160

Ø 160

Ø 78

50 142,5 25 155,5

FT03 - Hollow shaft FU03 - Hollow shaft

with rubber buffer with shrink disc * and rubber buffer

31,5 31,5

58
Ø 10,5

29 M10
158

158

Ø 34
Ø 25

1)
∆L=2
3 20
125,5 155,5

Dimensions in mm. * Shrink disc only in combination with motor frame sizes 63 und 71 1) ΔL = recommended preload

www.weg.net WG20 Gear Units and Geared Motors 317

 FH04 - Hollow shaft

kB
k
139,5 LB1 AD
32 LB 12

16
Ø AC
Ø 14
170

275
124

M8 x 16

145
162
Ø 85
Ø 80 H7

43
3

77
°
60
6x
0
3 M10 x 20 10
F 4 31 93
Ø
180
30°

157

36 55 38,3
Ø 50

FD04 - Shrink disc *

10

132 M12 x 50
Ø 35 H7

150
Ø 35 h6

114

M12

Ø 85
FS04 - Output shaft
FB04 - Output shaft on both sides
186
Ø 35 H7
Ø 35

20 24
Ø 50

60 177
Ø 30 k6

3 5 50 8
+5 +5
20 0 24 0
33

DIN332 M10 177

Ø 35 h6
Ø 35 h6

31 93 M10 x 20
148

Motor fr.
63 71 80 L80 90S/L 100L L100L
Dimension
AC 126 141 159 159 178 199 199
AD 128 136 145 145 155 165 165
k 344 378 386 410 428 478 516
kB 388 427 444 468 501 562 600
LB 204 238 246 270 288 338 376
LB1 248 287 304 328 361 422 460

Motor dimension sheets see page 590. Description of motor lengths LB and LB1 see page 594.

318 WG20 Gear Units and Geared Motors www.weg.net

FO04 - B5 flange execution with hollow shaft

kB + 25
k + 25
164,5 LB1
LB AD

12
3,5

Ø AC

275
124
Ø 130 j6

4 x 90°
Ø 200

Z
Ø 85

5
Ø 16
25

25 157 Ø 11 45°
F
180
Z
Ø 116
Ø 94

3,5
25

FF04 - B5 flange execution with output shaft FP04 - B5 flange execution

with hollow shaft and shrink disc *

12 12
3,5 3,5
Ø 130 j6

Ø 130 j6
Ø 200

Ø 200

Ø 85

60 173 25 186

FT04 - Hollow shaft FU04 - Hollow shaft

with rubber buffer with shrink disc * and rubber buffer

32 32

60
30
Ø 13,5

M12
170

170

Ø 44
Ø 32

1)
∆L=2
4 20

156 186

Dimensions in mm. * Shrink disc only in combination with motor frame sizes 63, 71 and 80 1) ΔL = recommended preload

www.weg.net WG20 Gear Units and Geared Motors 319

 FH05 - Hollow shaft

kB
k
152 LB1 AD
40,5 LB 14

21
Ø AC
Ø 14
198

135,6

317
M12 x 24

191
170
Ø 90
Ø 90 H7

55
3

93
°
60
6x
0
3 M12 x 24 12
F 4,5 33,5 102
Ø 30°
200
177

46 60 43,3
Ø 55

12

142 M16 x 50
Ø 40 H7

FD05 - Shrink disc *

166
Ø 40 h6

132

M16

Ø 90
FS05 - Output shaft
FB05 - Output shaft on both sides
206
Ø 40 H7

20 24
Ø 40
Ø 55

70 193
Ø 35 k6

4 7 56 10
+5 +5
20 0 24 0
38

DIN332 M12 193

Ø 40 h6

Ø 40 h6

34,5 102 M12 x 24

164

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M
Dimension
AC 126 141 159 159 178 199 199 221 261 261
AD 128 136 145 145 155 165 165 185 205 205
k 356 390 398 422 440 490 528 500 565 603
kB 400 439 456 480 513 574 612 587 683 721
LB 204 238 246 270 288 338 376 348 413 451
LB1 248 287 304 328 361 422 460 435 531 569

Motor dimension sheets see page 590. Description of motor lengths LB and LB1 see page 594.

320 WG20 Gear Units and Geared Motors www.weg.net

FO05 - B5 flange execution with hollow shaft

kB + 23,5
k + 23,5
175,5 LB1
LB AD

15
4

Ø AC
135,6

317

4 x 90°
Ø 180 j6
Ø 250

Z
Ø 90

15
Ø2

45°
23,5 177 Ø 13,5
F
200
Z
Ø 94

4
23,5

FF05 - B5 flange execution with output shaft FP05 - B5 flange execution

with hollow shaft and shrink disc *

15 15
4 4
Ø 180 j6

Ø 180 j6
Ø 250

Ø 250

Ø 90

70 187 23,5 206

FT05 - Hollow shaft FU05 - Hollow shaft

with rubber buffer with shrink disc * and rubber buffer

40,5 40,5

62
31
Ø 13,5

M12
198

198

Ø 44
Ø 32

1)
∆L=2

177 206 4 20

Dimensions in mm. * Shrink disc only in combination with motor frame sizes 63, 71, 80 and 90 1) ΔL = recommended preload

www.weg.net WG20 Gear Units and Geared Motors 321

 FH06 - Hollow shaft

kB
k
163 LB1 AD
41 LB 16

22
Ø AC
Ø 14
218

158,2

352
M12 x 18

212,5
190
Ø 97
Ø 90 H7

60
4

93,5
0
4 M12 x 18 12
45°
F 4 37,5 112
Ø
8x

187 212

47 65 43,3
Ø 55

12

156 M16 x 50
Ø 40 H7

FD06 - Shrink disc *

180
Ø 40 h6

146

M16

Ø 97
FS06 - Output shaft
FB06 - Output shaft on both sides
220,5
Ø 40 H7
Ø 40

20 25
Ø 55

80 208
Ø 40 k6

5
5 70 12
+5 +5
20 0 25 0
43

DIN332 M16 208

Ø 40 h6

Ø 40 h6

38,5 112 M12 x 18

177

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L
Dimension
AC 126 141 159 159 178 199 199 221 261 261 329 329
AD 128 136 145 145 155 165 165 185 205 205 266 266
k 367 401 409 433 451 501 539 511 576 614 708 752
kB 411 450 467 491 524 585 623 598 694 732 832 876
LB 204 238 246 270 288 338 376 348 413 451 545 589
LB1 248 287 304 328 361 422 460 435 531 569 669 713

Motor dimension sheets see page 590; Gear unit size F06 corresponds to motor flange FR-200. Description of motor lengths LB and LB1 see page 594.

322 WG20 Gear Units and Geared Motors www.weg.net

FO06 - B5 flange execution with hollow shaft

kB + 36
k + 36
199 LB1
LB AD

15
4

Ø AC
158,2

352
Ø 180 j6

4 x 90°
Ø 250

Z
Ø 97

5
Ø 21

36 187
Z
Ø 13,5 45° F
Ø 78

212

4
36

FF06 - B5 flange execution with output shaft FP06 - B5 flange execution

with hollow shaft and shrink disc *

15 15

4 4
Ø 180 j6

Ø 180 j6
Ø 250

Ø 250

Ø 97

80 212 36 220,5

FT06 - Hollow shaft FU06 - Hollow shaft

with rubber buffer with shrink disc * and rubber buffer

41 41
64
32
Ø 13,5

M12
218

218

Ø 44
Ø 40

1)
∆L=2
4 20
187 220,5

Dimensions in mm. * Shrink disc only in combination with motor frame sizes 63, 71, 80, 90, 100 and 112 1) ΔL = recommended preload

www.weg.net WG20 Gear Units and Geared Motors 323

 FH07 - Hollow shaft

kB
k
189 LB1 AD
50 LB 20

32
Ø AC
Ø 21
278

197,8

421
M12 x 18

272
240
Ø 117
Ø 110 H7

70

117
F 4 M16 x 24 14
0
8 Ø 45°
36,5 140 8x
215,5 270

53 75 53,8
Ø 70

M16 x 50 FD07 - Shrink disc *

14

183
Ø 50 H7

210
Ø 50 h6

176

M16
4

Ø 117
FS07 - Output shaft
FB07 - Output shaft on both sides
253,5
Ø 50 H7

30 31
Ø 50
Ø 70

100 241
Ø 50 k6

5 10 80 14
+5 +5
30 0 31 0
53,5

DIN332 M16 241

Ø 50 h6
Ø 50 h6

37,5 140 M16 x 24

206

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L
Dimension
AC 126 141 159 159 178 199 199 221 261 261 329 329
AD 128 136 145 145 155 165 165 185 205 205 266 266
k 393 427 435 459 477 527 565 537 602 640 734 778
kB 437 476 493 517 550 611 649 624 720 758 858 902
LB 204 238 246 270 288 338 376 348 413 451 545 589
LB1 248 287 304 328 361 422 460 435 531 569 669 713

Motor dimension sheets see page 590; Gear unit size F07 corresponds to motor flange FR-200. Description of motor lengths LB and LB1 see page 594.

324 WG20 Gear Units and Geared Motors www.weg.net

FO07 - B5 flange execution with hollow shaft

kB + 37
k + 37
226 LB1
LB AD

16
4

Ø AC
197,8

421
Ø 230 j6

4 x 90°
Ø 300

Ø 117

5
Ø 26

Z
45°
F
Ø 98

37 215,5 Ø 13,5
270

4
37

FF07 - B5 flange execution with output shaft FP07 - B5 flange execution

with hollow shaft and shrink disc *

16 16
4 4
Ø 230 j6

Ø 230 j6
Ø 300

Ø 300

Ø 117

100 242 37 253,5

FT07 - Hollow shaft FU07 - Hollow shaft

with rubber buffer with shrink disc * and rubber buffer

50 50

94
47 M16
278

278

Ø 56
Ø 50
Ø17

∆L=3
1)

5
215,5 253,5 32

Dimensions in mm. * Shrink disc and protection cap possible with all mountable motors. 1) ΔL = recommended preload

www.weg.net WG20 Gear Units and Geared Motors 325

 FH082 / FH083 - Hollow shaft

kB
k
224,5 LB1 AD
62 LB 26

34
Ø AC
Ø 22
346

248,4

561
M16 x 24

344
310
Ø 136
Ø 140 H7

100

153
F 4
4 M16 x 24
Ø1
70
45
°
43 165 8x
247 330

49 80 64,4
Ø 90

18

210 M20 x 70
Ø 60 H7

FD082 / FD083 - Shrink disc *

240
Ø 60 h6

188

M20

Ø 162
FS082 / FS083 - Output shaft
FB082 / FB083 - Output shaft on both sides
289,5
Ø 65 H7

30 41
Ø 65
Ø 90

120
4 281
Ø 60 m6

5 110 18 +5 +5
30 0 40 0
64

DIN332 M20
Ø 65 h6

Ø 65 h6

43 165 M16 x 24 281

236

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L 180M 180L
Dimension
AC 126 141 159 159 178 199 199 221 261 261 329 329 347 347
AD 128 136 145 145 155 165 165 185 205 205 266 266 281 281
k 429 463 471 495 513 563 601 573 638 676 760 804 828 866
kB 473 512 529 553 586 647 685 660 756 794 884 928 946 984
LB 204 238 246 270 288 338 376 348 413 451 535 579 603 641
LB1 248 287 304 328 361 422 460 435 531 569 659 703 721 759

Motor dimension sheets see page 590; Gear unit size F082/F083 corresponds to motor flange FR-300. Description of motor lengths LB and LB1 see page 594.

326 WG20 Gear Units and Geared Motors www.weg.net

FO082 / FO083 - B5 flange execution with hollow shaft

kB + 30
k + 30
255 LB1
LB AD

18,5
5

Ø AC
248,4

561
Ø 250 j6

4 x 90°
Ø 350

27,5 Ø 300

30 240
Ø 17,5 45° F
Z
Ø 137

330

5
31

FF082 / FO083 - FP082 / FP083 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc *

18,5 18,5
5 5
Ø 250 j6

Ø 250 j6
Ø 350

Ø 350

Ø 162

120 266 30 289,5

FT082 / FT083 - Hollow shaft FU082 / FU083 - Hollow shaft

with rubber buffer with shrink disc * and rubber buffer

62 62
102
51
M16
346

346

Ø 63
Ø 17
Ø 70

1)
∆L=3
6

240 289,5 32

Dimensions in mm. * Shrink disc and protection cap possible with all mountable motors. 1) ΔL = recommended preload

www.weg.net WG20 Gear Units and Geared Motors 327

 FH084 - Hollow shaft

kB
k
310 LB1 AD
62 LB 26

Ø AC

34
Ø 22
346

298,4

561
M16 x 24

344
310
Ø 136
Ø 140 H7

100

153
F 4
4 M16 x 24
Ø1
70
45
°
43 165 8x
247 330

49 80 64,4
Ø 90

18

210 M20 x 70
Ø 60 H7

FD084 - Shrink disc *

240
Ø 60 h6

188

M20

Ø 162
FS084 - Output shaft
FB084 - Output shaft on both sides
289,5
Ø 65 H7

30 41
Ø 65
Ø 90

120
4 281
Ø 60 m6

5 110 18 +5 +5
30 0 40 0
64

DIN332 M20
Ø 65 h6

Ø 65 h6

43 165 M16 x 24 281

236

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M
Dimension
AC 126 141 159 159 178 199 199 221 261 261
AD 128 136 145 145 155 165 165 185 205 205
k 514 548 556 580 598 648 686 658 723 761
kB 558 597 614 638 671 732 770 745 841 879
LB 204 238 246 270 288 338 376 348 413 451
LB1 248 287 304 328 361 422 460 435 531 569

Motor dimension sheets see page 590. Description of motor lengths LB and LB1 see page 594.

328 WG20 Gear Units and Geared Motors www.weg.net

FO084 - B5 flange execution with hollow shaft

kB + 30
k + 30
340 LB1
LB AD

18,5

Ø AC
5
298,4

561
Ø 250 j6

4 x 90°
Ø 350

27,5 Ø 300

30 240
Ø 17,5 45° F
Z
Ø 137

330

5
31

FF084 - FP084 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc *

18,5 18,5
5 5
Ø 250 j6

Ø 250 j6
Ø 350

Ø 350

Ø 162

120 266 30 289,5

FT084 - Hollow shaft FU084 - Hollow shaft

with rubber buffer with shrink disc * and rubber buffer

62 62
102
51
M16
346

346

Ø 63
Ø 17
Ø 70

1)
∆L=3
6

240 289,5 32

Dimensions in mm. * Shrink disc and protection cap possible with all mountable motors. 1) ΔL = recommended preload

www.weg.net WG20 Gear Units and Geared Motors 329

 FH092 / FH093 - Hollow shaft

kB
k
274,5 LB1 AD
70 LB 30

43
Ø AC
Ø 26
395

284,8

M16 x 24

624
393
350
Ø 136
Ø 145 H7

120

180
F 4 M20 x 30
Ø
18
0
5,5 48,5 205 45°
8x
307 400

61 100 74,9
Ø 95

M20 x 70
20

270 FD092 / FD093 - Shrink disc *

Ø 70 H7

300
Ø 70 h6

248

M20 4

Ø 177
FS092 / FS093 - Output shaft
FB092 / FB093 - Output shaft on both sides
349,5
Ø 75 H7

40 55
Ø 75
Ø 95

4 140
7,5 125 20 345
+5 +5
40 0 55 0
Ø 70 m6

74,5

DIN332 M20
345
Ø 75 h6

Ø 75 h6

48,5 205 M20 x 30

296

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L 180M 180L 200L
Dimension
AC 126 141 159 159 178 199 199 221 261 261 329 329 347 347 386
AD 128 136 145 145 155 165 165 185 205 205 266 266 281 281 317
k 479 513 521 545 563 613 651 623 688 726 810 854 878 916 1008
kB 523 562 579 603 636 697 735 710 806 844 934 978 996 1034 1134
LB 204 238 246 270 288 338 376 348 413 451 535 579 603 641 733
LB1 248 287 304 328 361 422 460 435 531 569 659 703 721 759 859

Motor dimension sheets see page 590; Gear unit size F092/F093 corresponds to motor flange FR-300. Description of motor lengths LB and LB1 see page 594.

330 WG20 Gear Units and Geared Motors www.weg.net

FO092 / FO093 - B5 flange execution with hollow shaft

kB + 42
k + 42
316,5 LB1
LB AD

22
5
284,8

624
Ø 350 h6
Ø 450

Ø 136

Z
31 Ø 400

5°
x4
42 307
Z 22,5°
8
F
Ø 112
Ø 145

Ø 17,5
400

5
42

FF092 / FF093 - FP092 / FP093 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc *

22
22
5 5
Ø 350 h6

Ø 350 h6
Ø 450

Ø 450

Ø 177

140 338 42 349,5

FT092 / FT093 - Hollow shaft FU092 / FU093 - Hollow shaft

with rubber buffer with shrink disc * and rubber buffer

70 70
122
61 M16
Ø 17
Ø 70
Ø 63
395

395

∆L=3
1)

6
40

300 349,5

Dimensions in mm. * Shrink disc and protection cap possible with all mountable motors. 1) ΔL = recommended preload

www.weg.net WG20 Gear Units and Geared Motors 331

 FH094 - Hollow shaft

kB
k
360 LB1 AD
70 LB 30

Ø AC

43
Ø 26
395

334,8

M16 x 24

624
393
350
Ø 136
Ø 145 H7

120

180
F 4 M20 x 30
Ø
18
0
5,5 48,5 205 45°
8x
307 400

61 100 74,9
Ø 95

M20 x 70
20

270 FD094 - Shrink disc *

Ø 70 H7

300
Ø 70 h6

248

M20 4

Ø 177
FS094 - Output shaft
FB094 - Output shaft on both sides
349,5
Ø 75 H7

40 55
Ø 75
Ø 95

4 140
7,5 125 20 345
+5 +5
40 0 55 0
Ø 70 m6

74,5

DIN332 M20
345
Ø 75 h6

Ø 75 h6

48,5 205 M20 x 30

296

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M
Dimension
AC 126 141 159 159 178 199 199 221 261 261
AD 128 136 145 145 155 165 165 185 205 205
k 564 598 606 630 648 698 736 708 773 811
kB 608 647 664 688 721 782 820 795 891 929
LB 204 238 246 270 288 338 376 348 413 451
LB1 248 287 304 328 361 422 460 435 531 569

Motor dimension sheets see page 590. Description of motor lengths LB and LB1 see page 594.

332 WG20 Gear Units and Geared Motors www.weg.net

FO094 - B5 flange execution with hollow shaft

kB + 42
k + 42
402 LB1
LB AD

22

Ø AC
5
334,8

624
Ø 350 h6
Ø 450

Ø 136

Z
31 Ø 400

5°
x4
42 307
Z 22,5°
8
F
Ø 112
Ø 145

Ø 17,5
400

5
42

FF094 - FP094 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc *

22
22
5 5
Ø 350 h6

Ø 350 h6
Ø 450

Ø 450

Ø 177

140 338 42 349,5

FT094 - Ausführung mit FU094 - Hollow shaft

Hohlwelle und Gummipuffer with shrink disc * and rubber buffer

70 70
122
61 M16
Ø 17
Ø 70
Ø 63
395

395

∆L=3
1)

6
40

300 349,5

Dimensions in mm. * Shrink disc and protection cap possible with all mountable motors. 1) ΔL = recommended preload

www.weg.net WG20 Gear Units and Geared Motors 333

 FH102 / FH103 - Hollow shaft

kB
k
314,5 LB1 AD
88 LB 36
Ø 26

52
Ø AC
485

338,4

755
M20 x 30

452
400
Ø 192
Ø 180 H7

125
2,5

207
F 2,5 M24 x 36 23
0
15,5 Ø 45°
69,5 220 8x
360 450

82 120 95,4
Ø 120

25

313 M24 x 80 FD102 / FD103 - Shrink disc *

Ø 90 H7

350
Ø 90 h6

287

M24
2,5

FS102 / FS103 - Output shaft Ø 196

FB102 / FB103 - Output shaft on both sides
419
Ø 95 H7

60 65
Ø 95
Ø 120
Ø 90 m6

4,5 170
405
5 160 25
+5 +5
60 0 65 0
95

DIN332 M24
405
Ø 95 h6

Ø 95 h6

71,5 220 M24 x 36

349,5

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L 180M 180L 200L 225S/M
Dimension
AC - - - - - - - 221 261 261 329 329 347 347 386 453
AD - - - - - - - 185 205 205 266 266 281 281 317 385
k - - - - - - - 663 728 766 837 881 905 943 1035 1143
kB - - - - - - - 750 846 884 961 1005 1023 1061 1161 1261
LB - - - - - - - 348 413 451 522 566 590 628 720 828
LB1 - - - - - - - 435 531 569 646 690 708 746 846 946

Motor dimension sheets see page 590; Gear unit size F102/F103 corresponds to motor flange FR-400. Description of motor lengths LB and LB1 see page 594.

334 WG20 Gear Units and Geared Motors www.weg.net

FO102 / FO103 - B5 flange execution with hollow shaft

kB + 41
k + 41
355,5 LB1
AD
LB

22

Ø AC
5
338,4

755
Ø 350 h6
Ø 450

Ø 192

Z
25,5
Ø 400

°
45
Ø 179
Ø 131

41 360 Z

x
22,5°

8
Ø 17,5
450

5
41

FF102 / FF103 - FP102 / FP103 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc *

22 22
5 5
Ø 350 h6

Ø 350 h6
Ø 450

Ø 450

Ø 196

170 388,5 41 419

FT102 / FT103 - Hollow shaft FU102 / FU103 - Hollow shaft

with rubber buffer with shrink disc * and rubber buffer

88 88

132
66 M20
Ø 20,5
Ø 80
Ø 100
485

485

∆L=3
1)

8
40

359 419

Dimensions in mm. * Shrink disc and protection cap possible with all mountable motors. 1) ΔL = recommended preload

www.weg.net WG20 Gear Units and Geared Motors 335

 FH104 - Hollow shaft

kB
k
391 LB1 AD
88 LB 36

Ø AC
Ø 26

52
485

389,3

755
M20 x 30

452
400
Ø 192
Ø 180 H7

125
2,5

207
F 2,5 M24 x 36 23
0
15,5 Ø 45°
69,5 220 8x
360 450

82 120 95,4
Ø 120

25

313 M24 x 80 FD104 - Shrink disc *

Ø 90 H7

350
Ø 90 h6

287

M24
2,5

Ø 196
FS104 - Output shaft
FB104 - Output shaft on both sides
419
Ø 95 H7

60 65
Ø 95
Ø 120
Ø 90 m6

4,5 170
405
5 160 25
+5 +5
60 0 65 0
95

DIN332 M24
405
Ø 95 h6

Ø 95 h6

71,5 220 M24 x 36

349,5

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L
Dimension
AC 126 141 159 159 178 199 199 221 261 261 329 329
AD 128 136 145 145 155 165 165 185 205 205 266 266
k 595 629 637 661 679 729 767 739 804 842 936 980
kB 639 678 695 719 752 813 851 826 922 960 1060 1104
LB 204 238 246 270 288 338 376 348 413 451 545 589
LB1 248 287 304 328 361 422 460 435 531 569 669 713

Motor dimension sheets see page 590; Gear unit size F104 corresponds to motor flange FR-200. Description of motor lengths LB and LB1 see page 594.

336 WG20 Gear Units and Geared Motors www.weg.net

FO104 - B5 flange execution with hollow shaft

kB + 41
k + 41
432 LB1
AD
LB

22

Ø AC
5
389,3

755
Ø 350 h6
Ø 450

Ø 192

Z
25,5
Ø 400

°
45
Ø 179
Ø 131

41 360 Z

x
22,5°

8
Ø 17,5
450

5
41

FF104 - FP104 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc *

22 22
5 5
Ø 350 h6

Ø 350 h6
Ø 450

Ø 450

Ø 196

170 388,5 41 419

FT104 - Hollow shaft FU104 - Hollow shaft

with rubber buffer with shrink disc * and rubber buffer

88 88

132
66 M20
Ø 20,5
Ø 80
Ø 100
485

485

∆L=3
1)

8
40

359 419

Dimensions in mm. * Shrink disc and protection cap possible with all mountable motors. 1) ΔL = recommended preload

www.weg.net WG20 Gear Units and Geared Motors 337

 FH122 / FH123 - Hollow shaft

kB
k
373,5 LB1 AD
110 LB 40
Ø 33

61
Ø AC
550

394,2

835
M24 x 36

450
511
Ø 219
Ø 210 H7

142
2,5

236
F 2,5 M30 x 45 25
0
Ø 45°
8 79 270 8x
422 530

94 140 106,4
Ø 140

M24 x 80 FD122 / FD123 - Shrink disc *

28

373
Ø 100 H7

Ø 100 h6

410
347

M24
2,5

FS122 / FS123 - Output shaft Ø 223

FB122 / FB123 - Output shaft on both sides
502
Ø 105 H7
Ø 105

60 85
Ø 140
Ø 110 m6

210
4,5
15 180 28 485
+5 +5
60 0 85 0
116

DIN332 M24
485
Ø 105 h6

Ø 105 h6

M30 x 45
81 270
409,5

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L 180M 180L 200L 225S/M
Dimension
AC - - - - - - - 221 261 261 329 329 347 347 386 453
AD - - - - - - - 185 205 205 266 266 281 281 317 385
k - - - - - - - 722 787 825 896 940 964 1002 1094 1202
kB - - - - - - - 809 905 943 1020 1064 1082 1120 1220 1320
LB - - - - - - - 348 413 451 522 566 590 628 720 828
LB1 - - - - - - - 435 531 569 646 690 708 746 846 946

Motor dimension sheets see page 590; Gear unit size F122/F123 corresponds to motor flange FR-400. Description of motor lengths LB and LB1 see page 594.

338 WG20 Gear Units and Geared Motors www.weg.net

FO122 / FO123 - B5 flange execution with hollow shaft

kB + 51
k + 51
424,5 LB1
LB AD

25

Ø AC
5
394,2

835
Ø 450 h6
Ø 550

Ø 219

Z
34
0
Ø 50

F
Ø 149

°
Ø 198

45
51 422

x
22,5°

8
Ø 17,5
530
5
51

FF122 / FF123 - FP122 / FP123 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc *

25 25
5 5
Ø 450 h6

Ø 450 h6
Ø 550

Ø 550

Ø 223
210 458,5 51 502

FT122 / FT123 - Hollow shaft FU122 / FU123 - Hollow shaft

with rubber buffer with shrink disc * and rubber buffer

110 110

182
M20
Ø 20,5

91
Ø 100
Ø 120
550

550

1)
∆L=3
8
63

421 502

Dimensions in mm. * Shrink disc and protection cap possible with all mountable motors. 1) ΔL = recommended preload

www.weg.net WG20 Gear Units and Geared Motors 339

 FH124 - Hollow shaft

kB
k
450 LB1 AD
110 LB 40

Ø AC
Ø 33

61
550

445

835
M24 x 36

450
511
Ø 219
Ø 210 H7

142
2,5

236
F 2,5 M30 x 45 25
0
Ø 45°
8 79 270 8x
422 530

94 140 106,4
Ø 140

M24 x 80 FD124 - Shrink disc *

28

373
Ø 100 H7

Ø 100 h6

410
347

M24
2,5

FS124 - Output shaft Ø 223

FB124 - Output shaft on both sides
502
Ø 105 H7
Ø 105

60 85
Ø 140
Ø 110 m6

210
4,5
15 180 28 485
+5 +5
60 0 85 0
116

DIN332 M24
485
Ø 105 h6

Ø 105 h6

M30 x 45
81 270
409,5

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L
Dimension
AC 126 141 159 159 178 199 199 221 261 261 329 329
AD 128 136 145 145 155 165 165 185 205 205 266 266
k 654 688 696 720 738 788 826 798 863 901 995 1039
kB 698 737 754 778 811 872 910 885 981 1019 1119 1163
LB 204 238 246 270 288 338 376 348 413 451 545 589
LB1 248 287 304 328 361 422 460 435 531 569 669 713

Motor dimension sheets see page 590; Gear unit size F124 corresponds to motor flange FR-200. Description of motor lengths LB and LB1 see page 594.

340 WG20 Gear Units and Geared Motors www.weg.net

FO124 - B5 flange execution with hollow shaft

kB + 51
k + 51
501 LB1
LB AD

25

Ø AC
5
445

835
Ø 450 h6
Ø 550

Ø 219

Z
34
0
Ø 50

F
Ø 149

°
Ø 198

45
51 422

x
22,5°

8
Ø 17,5
530
5
51

FF124 - FP124 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc *

25 25
5 5
Ø 450 h6

Ø 450 h6
Ø 550

Ø 550

Ø 223
210 458,5 51 502

FT124 - Hollow shaft FU124 - Hollow shaft

with rubber buffer with shrink disc * and rubber buffer

110 110

182
M20
Ø 20,5

91
Ø 100
Ø 120
550

550

1)
∆L=3
8
63

421 502

Dimensions in mm. * Shrink disc and protection cap possible with all mountable motors. 1) ΔL = recommended preload

www.weg.net WG20 Gear Units and Geared Motors 341

 FH152 / FH153 - Hollow shaft

kB
k
456 LB1 AD
150 LB 45
Ø 33

70
Ø AC
660

444,2

1016
M24 x 36

610
540
Ø 270
Ø 240 H7

170
7

281
F 0
7 M36 x 54 30 45°
16,5 Ø 8x
118 310
660
510

129 160 127,4

Ø 160

FD152 / FD153 - Shrink disc *

32

460 M24 x 80
Ø 120 H7

500
Ø 120 h6

434

7
M24

FS152 / FS153 - Output shaft Ø 274

FB152 / FB153 - Output shaft on both sides
598,5
Ø 125 H7
Ø 125

40 90
Ø 160
Ø 120 m6

4 210
580
5 200 32
+5 +5
40 0 90 0
127

DIN332 M24 580

Ø 125 h6

Ø 125 h6

115 310 M36 x 54

490

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L 180M 180L 200L 225S/M 280S/M
Dimension
AC - - - - - - - - - - 329 329 347 347 386 453 599
AD - - - - - - - - - - 266 266 281 281 317 385 472
k - - - - - - - - - - 962 1006 1030 1068 1160 1268 1429
kB - - - - - - - - - - 1086 1130 1148 1186 1286 1386 1522
LB - - - - - - - - - - 506 550 574 612 704 812 973
LB1 - - - - - - - - - - 630 674 692 730 830 930 1066

Motor dimension sheets see page 590; Gear unit size F152/F153 corresponds to motor flange FR-550. Description of motor lengths LB and LB1 see page 594.

342 WG20 Gear Units and Geared Motors www.weg.net

FO152 / FO153 - B5 flange execution with hollow shaft

kB + 58
k + 58
514 LB1
LB AD

28
6

Ø AC
444,2

1016
Ø 550 h6
Ø 660

Ø 270

Z 47
Ø 600

F
Ø 181
Ø 214

°
45
58 510

x
22,5°

8
Ø 24
660
6
58

FF152 / FF153 - FP152 / FP153 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc *

28 28
6 6
Ø 550 h6

Ø 550 h6
Ø 660

Ø 660

210 551 58 598,5

FT152 / FT153 - Hollow shaft FU152 / FU153 - Hollow shaft

with rubber buffer with shrink disc * and rubber buffer

150 150
187
Ø 100

93,5 M20
Ø 20,5
Ø 120
660

660

∆L=3
1)

8
63

508,5 598,5

Dimensions in mm. * Shrink disc and protection cap possible with all mountable motors. 1) ΔL = recommended preload

www.weg.net WG20 Gear Units and Geared Motors 343

 FH154 - Hollow shaft

kB
k
541 LB1 AD
150 LB 45

Ø AC
Ø 33

70
660

509,3

1016
M24 x 36

610
540
Ø 270
Ø 240 H7

170
7

281
F 0
7 M36 x 54 30 45°
16,5 Ø 8x
118 310
660
510

129 160 127,4

Ø 160

FD154 - Shrink disc *

32

460 M24 x 80
Ø 120 H7

500
Ø 120 h6

434

7
M24

Ø 274
FS154 - Output shaft
FB154 - Output shaft on both sides
598,5
Ø 125 H7
Ø 125

40 90
Ø 160
Ø 120 m6

4 210
580
5 200 32
+5 +5
40 0 90 0
127

DIN332 M24 580

Ø 125 h6

Ø 125 h6

115 310 M36 x 54

490

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L 180M 180L 200L
Dimension
AC 126 141 159 159 178 199 199 221 261 261 329 329 347 347 386
AD 128 136 145 145 155 165 165 185 205 205 266 266 281 281 317
k 745 779 787 811 829 879 917 889 954 992 1076 1120 1144 1182 1274
kB 789 828 845 869 902 963 1001 976 1072 1110 1200 1244 1262 1300 1400
LB 204 238 246 270 288 338 376 348 413 451 535 579 603 641 733
LB1 248 287 304 328 361 422 460 435 531 569 659 703 721 759 859

Motor dimension sheets see page 590; Gear unit size F154 corresponds to motor flange FR-300. Description of motor lengths LB and LB1 see page 594.

344 WG20 Gear Units and Geared Motors www.weg.net

FO154 - B5 flange execution with hollow shaft

kB + 58
k + 58
599 LB1
LB AD

28

Ø AC
6
509,3

1016
Ø 550 h6
Ø 660

Ø 270

Z 47
Ø 600

F
Ø 181
Ø 214

°
45
58 510

x
22,5°

8
Ø 24
660
6
58

FF154 - FP154 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc *

28 28
6 6
Ø 550 h6

Ø 550 h6
Ø 660

Ø 660

210 551 58 598,5

FT154 - Hollow shaft FU154 - Hollow shaft

with rubber buffer with shrink disc * and rubber buffer

150 150
187
Ø 100

93,5 M20
Ø 20,5
Ø 120
660

660

∆L=3
1)

8
63

508,5 598,5

Dimensions in mm. * Shrink disc and protection cap possible with all mountable motors. 1) ΔL = recommended preload

www.weg.net WG20 Gear Units and Geared Motors 345

 FH155 - Hollow shaft

kB
k
628 LB1 AD
150 LB 45

Ø AC
Ø 33

70
660

559,3

1016
M24 x 36

610
540
Ø 270
Ø 240 H7

170
7

281
F 0
7 M36 x 54 30 45°
16,5 Ø 8x
118 310
660
510

129 160 127,4

Ø 160

FD155 - Shrink disc *

32

460 M24 x 80
Ø 120 H7

500
Ø 120 h6

434

7
M24

Ø 274
FS155 - Output shaft
FB155 - Output shaft on both sides
598,5
Ø 125 H7
Ø 125

40 90
Ø 160
Ø 120 m6

4 210
580
5 200 32
+5 +5
40 0 90 0
127

DIN332 M24 580

Ø 125 h6

Ø 125 h6

115 310 M36 x 54

490

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M
Dimension
AC 126 141 159 159 178 199 199 221 261 261
AD 128 136 145 145 155 165 165 185 205 205
k 832 866 874 898 916 966 1004 976 1041 1079
kB 876 915 932 956 989 1050 1088 1063 1159 1197
LB 204 238 246 270 288 338 376 348 413 451
LB1 248 287 304 328 361 422 460 435 531 569

Motor dimension sheets see page 590; Gear unit size F155 corresponds to motor flange FR-550. Description of motor lengths LB and LB1 see page 594.

346 WG20 Gear Units and Geared Motors www.weg.net

FO155 - B5 flange execution with hollow shaft

kB + 58
k + 58
685 LB1
LB AD

28

Ø AC
6
559,3

1016
Ø 550 h6
Ø 660

Ø 270

Z 47
Ø 600

F
Ø 181
Ø 214

°
45
58 510

x
22,5°

8
Ø 24
660
6
58

FF155 - FP155 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc *

28 28
6 6
Ø 550 h6

Ø 550 h6
Ø 660

Ø 660

210 551 58 598,5

FT155 - Hollow shaft FU155 - Hollow shaft

with rubber buffer with shrink disc * and rubber buffer

150 150
187
Ø 100

93,5 M20
Ø 20,5
Ø 120
660

660

∆L=3
1)

8
63

508,5 598,5

Dimensions in mm. * Shrink disc and protection cap possible with all mountable motors. 1) ΔL = recommended preload

www.weg.net WG20 Gear Units and Geared Motors 347

F

348 WG20 Gear Units and Geared Motors www.weg.net

Dimension sheets Input types

F
www.weg.net WG20 Gear Units and Geared Motors 349
 IEC Adapter I63 to I280

l
la

m f

Ød
Ø n H7

ga
p
Ød

t α1 s
E
α
F

Type I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 I225 I250 I280

p 154 154 200 200 250 250 300 350 350 400 450 550 550
n 95 110 130 130 180 180 230 250 250 300 350 450 450
la 22.5 10 13 13 15 20 15 35 35 20 20 20 20
m 115 130 165 165 215 215 265 300 300 350 400 500 500
t 4.5 4.5 4.5 4.5 5 5 5 5 5 5.5 5 5 5
s M8x16 M8x10 11 11 13.5 13.5 13.5 17.5 17.5 17.5 17.5 17.5 17.5
α 90 90 90 90 90 90 90 90 90 90 45 45 45
α1 35 45 45 45 45 45 45 45 45 45 45 45 45
d 11 14 19 24 28 28 38 42 48 55 60 65 75
f 4 5 6 8 8 8 10 12 14 16 18 18 20
ga 12.8 16.3 21.8 27.3 31.3 31.3 41.3 45.3 51.8 59.3 64.4 69.4 79.9
E 1) 25 32 43 47.5 63 100 85.5 111.5 111.5 114.5 140 146 146
1) Maximum motor shaft length for motors with key

I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 I225 I250 I280
Gear unit
size
l
F02 137 137 165 165 196 - - - - - - - -
F03 147 147 175 175 206 - - - - - - - -
F04 171.5 171.5 199.5 199.5 230.5 - - - - - - - -
F05 184 184 212 212 243 296 307 - - - - - -
F06 195.5 195.5 223.5 223.5 254.5 307.5 318.5 404.5 404.5 - - - -
F07 221.5 221.5 249.5 249.5 280.5 333.5 344.5 430.5 430.5 - - - -
F082/083 248.5 248.5 276.5 276.5 307.5 360.5 371.5 456 456 484.5 514.5 - -
F084 332 332 360 360 391 444 455 - - - - -
F092/093 298.5 298.5 326.5 326.5 357.5 410.5 421.5 506 506 534.5 564.5 - -
F094 382 382 410 410 441 494 505 - - - - -
F102/103 - - - - - 440 451 533 533 561.5 591.5 685.5 685.5
F104 423.5 423.5 451.5 451.5 482.5 535.5 546.5 632.5 632.5 - - - -
F122/123 - - - - - 499.5 510.5 592.5 592.5 621 651 745 745
F124 482.5 482.5 510.5 510.5 541.5 594.5 605.5 691.5 691.5 - - - -
F152/153 - - - - - - - 659 659 687.5 717.5 811.5 811.5
F154 564.5 564.5 592.5 592.5 623.5 676.5 687.5 772.5 772.5 801 831 - -
F155 647 647 675 675 706 759 770 - - - - - -

Dimensions in mm.

350 WG20 Gear Units and Geared Motors www.weg.net

NEMA Adapter N56 to N364

l
la

m f

Ød
Ø n H7

ga
p
Ød

t α1 s
E
α
F

Typ N56 N143/145 N182 N184 N213/215 N254/256 N284/286 N324/326 N364

p 170 170 250 250 300 225 280 350 400

n 114.3 114.3 215.9 215.9 215.9 215.9 266.7 317.5 317.5
la 13 13 10 16.8 10 30 35 15 15
m 149.225 149.225 184.15 184.15 184.15 184.15 228.6 279.4 279.4
t 4.5 4.5 5 3.2 5 5 3 5 5
s 11 11 14 14 14 14 14 16 16
α 90 90 90 90 90 90 90 90 90
α1 45 45 45 45 45 45 45 45 45
d 15.875 22.225 28.575 28.575 34.925 41.275 47.625 53.975 60.325
f 4.775 4.775 6.350 6.350 7.950 9.525 12.700 12.700 15.875
ga 18.008 24.486 31.521 31.521 38.557 45.618 53.238 59.690 67.335
E 1) 55 55 67.5 96.8 80.5 105.5 111.5 109.5 109.5
1) Maximum motor shaft length for motors with key

N56 N143/145 N182 N184 N213/215 N254/256 N284/286 N324/326 N364

Gear unit
size
l
F02 165 165 196 - - - - - -
F03 175 175 206 - - - - - -
F04 199.5 199.5 230.5 - - - - - -
F05 212 212 243 296 307 - - - -
F06 223.5 223.5 254.5 307.5 318.5 404.5 407.5 - -
F07 249.5 249.5 280.5 333.5 344.5 430.5 433.5 - -
F082/083 276.5 276.5 307.5 360.5 371.5 456 459 506.5 522
F084 360 360 391 444 455 - - - -
F092/093 326.5 326.5 357.5 410.5 421.5 506 509 556.5 572
F094 410 410 441 494 505 - - - -
F102/103 - - - 440 451 533 536 583.5 599
F104 451.5 451.5 482.5 535.5 546.5 632.5 635.5 - -
F122/123 - - - 499.5 510.5 592.5 595.5 643 658.5
F124 510.5 510.5 541.5 594.5 605.5 691.5 694.5 - -
F152/153 - - - - - 659 662 725 725
F154 592.5 592.5 623.5 676.5 687.5 772.5 775.5 823 838.5
F155 675 675 706 759 770 - - - -

www.weg.net WG20 Gear Units and Geared Motors 351

 SERVO Adapter S92 to S190

Shaft with key

l f
la

ga
m

Ød
Ø n H7
Ød

p
Smooth shaft
t
α1
E s

α
Ød

Typ S92 S105 S114 S115 S130 S141 S142 S180 S189 S190

p 101 144 144 144 144 144 144 197 197 197
n 80 95 95 110 110 110 130 114.3 130 180
la 17.5 31 31 31 31 31 31 35 32 38
m 100 115 130 130 145 165 165 200 215 215
t 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5
s M6x12 M8x16 M8x16 M8x16 M8x16 M8x16 M8x16 13.5 15 15
α 90° 90° 90° 90° 90° 90° 90° 90° 90° 90°
α1 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°
d 1) 14 16 19 19 19 24 19 24 19 22 24 28 24 24 32 35 32 38 38
f 5 5 6 6 6 8 6 8 6 6 8 8 8 8 10 10 10 10 10
ga 16.3 18.3 21.8 21.8 21.8 27.3 21.8 27.3 21.8 24.8 27.3 31.3 27.3 27.3 35.3 38.3 35.3 41.3 41.3
E 2) 46 46 34 67 67 54 67 54 76 63 63 63 54 63 63 66 74 60 87
E 3) 46 46 46 67 67 67 67 67 76 76 76 63 67 76 63 87 74 60 87
1) Other shaft diameters on request
2) Maximum motor shaft length for motors with key
3) Maximum motor shaft length for motors with smooth shaft

S92 S105 S114 S115 S130 S141 S142 S180 S189 S190
Gear unit
size
l
F02 202.5 250.5 250.5 250.5 250.5 250.5 250.5 - - -
F03 212.5 260.5 260.5 260.5 260.5 260.5 260.5 - - -
F04 237 285 285 285 285 285 285 - - -
F05 249.5 297.5 297.5 297.5 297.5 297.5 297.5 368 362 389
F06 261 309 309 309 309 309 309 379.5 373.5 400.5
F07 287 335 335 335 335 335 335 405.5 399.5 426.5
F082/083 314 362 362 362 362 362 362 432.5 426.5 453.5
F084 397.5 445.5 445.5 445.5 445.5 445.5 445.5 516 510 537
F092/093 364 412 412 412 412 412 412 482.5 476.5 503.5
F094 447.5 495.5 495.5 495.5 495.5 495.5 495.5 566 560 587
F102/103 - - - - - - - 512 506 533
F104 489 537 537 537 537 537 537 607.5 601.5 628.5
F122/123 - - - - - - - 571.5 565.5 592.5
F124 548 596 596 596 596 596 596 666.5 660.5 687.5
F152/153 - - - - - - - - - -
F154 630 678 678 678 678 678 678 748.5 742.5 769.5
F155 712.5 760.5 760.5 760.5 760.5 760.5 760.5 831 825 852

Dimensions in mm.

352 WG20 Gear Units and Geared Motors www.weg.net

Input Unit U2, U3 Input Unit U5, U6, U7

l
l
Z X X
F
F

ØD

ØD
GA
ØN

ØN

GA
E R ØD
ØD
E R

Input shaft [mm] Input shaft [mm]

28x60
Type 19x40 24x50 28x60 38x80 42x110 48x110 55x110
19x40 24x50 38x80 48x110 55x110
Gear unit
42x110
U2 U3 U5 U6 U7 size
U2 U3 U5 U6 U7
D 19 24 28 38 42 48 55
F 6 8 8 10 12 14 16 l
GA 21.5 27 31 41 45 51.5 59 F02 165 - - - -
E 40 50 60 80 110 110 110 F03 175 - - - -
N 73 101 178 235 290 F04 199.5 - - - -
X 2 2.5 1.9 6.5 4 F05 212 244 - - -
Z 3 35 - - - F06 223.5 255.5 298 - -
R M6 M10 M10 M12 M16 M16 M20 F07 249.5 281.5 324 - -
F082/083 276.5 308.5 349.5 371.5 -
F084 360 392 - - -
Tolerances F092/093 326.5 358.5 399.5 421.5 -
Dimension name ISO tolerance DIN EN ISO 286-2 F094 410 442 - - -
F102/103 - 388 426.5 448.5 517.5
< Ø 55 mm k6
D F104 451.5 483.5 526 - -
≥ Ø 55 mm m6 F122/123 - 447.5 486 508 577
F124 510.5 542.5 585 - -
F152/153 - - 552.5 574.5 643.5
F154 592.5 624.5 666 688 -
F155 675 707 - - -

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 353

F

354 WG20 Gear Units and Geared Motors www.weg.net

Helical bevel gear units and
Helical bevel geared motors K

K
 Technical data
Size K02 K03 K04 K05 K06 K07 K08 K09 K10 K12 K15
Power [kW] 0.12 - 1.5 0.12 - 3.0 0.12 - 4.0 0.12 - 9.2 0.12 - 9.2 0.12 - 15 0.12 - 22 0.12 - 30 0.12 - 55 0.12 - 75 0.12 - 110
Torque [Nm] 110 200 400 600 820 1550 3000 4500 8000 13000 18000
3.82 4.17 4.87 4.27 4.94 7.91 7.45 6.94 6.64 6.60 8.61
Ratio - - - - - - - - - - -
68.88 217.88 277.79 245.70 198.00 256.14 2205.52 1810.95 1301.54 1579.81 14005.40
Number of stages 2 3 3 3 3 3 3/4 3/4 3/4 3/4 3/4/5
Housing material aluminium cast iron
Type with key acc. to DIN 6885.1 and threaded bore acc. to DIN 332 sheet 2
Solid
Tolerance < Ø 55: k6 / ≥ Ø 55: m6
shaft
Material standard: C45E (1.1191) / stainless steel on request
Type with key acc. to DIN 6885.1
Hollow
Tolerance H7
shaft
Material standard: C45E (1.1191) / stainless steel on request
Tolerance centring ≤ 250: j6 / > 250: h6 acc. to DIN EN 50347
Flanges
Material cast iron
Gear Type honed - designed and produced according to DIN 3990/3991 - Q7
wheels Material 16MnCr5 (1.7131) case hardened – minimum 58HRC
Shaft Type type AS acc. to DIN 3760
seals Material standard NBR / special FKM
Bearing standard / reinforced
Type standard CLP ISO VG 220 / special CLP HC ISO VG 220
Lubricants
K Quantity depending on mounting position
acc. to DIN 747: ≤ 50: -0.4; > 50 bis ≤ 250: -0.5; > 250: -1
Axle height
for foot-mounted geard motors, the motor may extend below the mounting surface

General information
1. Nameplate

h
WG20 WEG Gear Systems GmbH MADE IN i
2753 Markt Piesting, Austria AUSTRIA
www.weg-gears.net 03FEB24 j
KH022-11N-63-04F-TH-TF SN: 24B13056 k
a
Mat.: l
b P1 0.18 kW rpm 22 @ 50 Hz m
c M2 78 Nm i 61.75 n
d fB 1.30 M1 o
e Oil 0.04l-ISO VG 220 CLP p
f 10.2 kg q

a Type code j Production date

b Motor power k Serial number

c Output torque l Material number

d Service factor m Output speed and Frequency

e Type and quantity of lubricant n Total gear ratio

f Weight o Mounting position

g Space for ATEX code (if applicable) p QR-Code linked online to additional information

h Manufacturer address q Space for additional information

i Country of origin

356 WG20 Gear Units and Geared Motors www.weg.net

2. Type code

KH073-EX-11P-90S/L-04F ...
1 2 3 4 5 6 7 8 9 10

KH073-EX-I112-HT
1 2 3 4 5 11 12

1 Type: K = Helical bevel gear unit

2 Design: B = Output shaft on both sides

D = Hollow shaft with shrink disc
F = B5 flange type with output shaft
H = Hollow shaft
O = B5 flange type with hollow shaft
P = B5 flange type with hollow shaft and shrink disc
S = Output shaft


T = Hollow shaft with torque arm
U = Hollow shaft with shrink disc and torque arm
K

3 Size: 02 03 04 05 06 07 08 09 10 12 15

4 Number of stages: 2 = 2 gear stages 3 = 3 gear stages
4 = 4 gear stages 5 = 5 gear stages

5 ATEX execution: when operated in explosive atmospheres, see page 15

6 Motor type: 14P = Integral motor aluminium IE3

11P = Integral motor aluminium IE3
11S = Integral motor aluminium IE4
22P = Integral motor cast iron IE3
22S = Integral motor cast iron IE4

7 Motor frame size: 63 71 80 L80 90S/L 100L L100L 112M 132S

132M L132M 160M 160L 180M 180L 200L 225S/M 280S/M

8 Number of poles: 04 = 4 poles 06 = 6 poles

9 Power indicator: D E F G

10 Motor modules: see from page 595

11 Adapters, Input unit: IEC adapter I63 I71 I80 I90 I100 I112 I132
I160 I180 I200 I225 I250 I280

NEMA adapter N56 N143 N182 N184 N213

N254 N284 N324 N364

SERVO adapter S92 S105 S114 S115 S130

S141 S142 S180 S189 S190

Input unit U2 U3 U5 U6 U7

Direct mounting (IEC):

IEC63 IEC71 IEC80 IEC90 IEC100 IEC112
IEC132 IEC160 IEC180 IEC200 IEC225 IEC250 IEC280

12 High/Low temperature execution: HT LT

Type code Motor see page 565

www.weg.net WG20 Gear Units and Geared Motors 357

 3. Range

Size K02 K03 K04 K05 K06 K07 K08 K09 K10 K12 K15

Housing material Aluminium Cast iron

4. Design

B D F H

O P S T

B5 flange type with hollow shaft

B Output shaft on both sides P and shrink disc
D Hollow shaft with shrink disc S Output shaft

F B5 flange type with output shaft T Hollow shaft with torque arm
Hollow shaft with shrink disc
H Hollow shaft U and torque arm
U O B5 flange type with hollow shaft

5. Venting the gear unit

The helical bevel gear unit sizes K02 to K05 are neither equipped with a venting nor an oil drain screw.
They are supplied with lifetime-lubrication. a
By default, the helical bevel gear units from K06 are equipped with venting screws with a safety
strap for transportation (see illustration). The rubber strap (a) of the venting screw must be removed
entirely before the initial startup. The venting screw is placed accordingly to the mounting position
(see chapter Mounting positions, page 361)

6. Overhung and axial loads

The overhung loads (FrN) indicated in the respective selection tables apply to gear units with the force acting on the
shaft center (x=l/2). The permissible overhung loads listed are based on the least favourable loading direction
and calculated for standard shafts and standard bearings. Other load directions and action can be calculated with
equations Q1 to Q3. If transmission elements are placed on the output shaft, an appropriate factor (fz) has to
be taken into consideration when determining the overhung load.

Gear wheels Sprockets V-belts Flat belts

fz=1.1 fz=1.2 fz=1.1

fz=1.8 fz=2.5
(z≤17) (z≤13) (z>13)

358 WG20 Gear Units and Geared Motors www.weg.net

 Use the following equations Q1 and Q2 to calculate the permissible radial loads on the output shaft. Q3 is to calculate
the real existing shaft loads for your application. The results are to be compared by using the equation Q4.

Variable Unit Description

Q1 FzL = FrN · a1 a1 Load action factor - output shaft bearing from Table 1
a2 Load action factor - output shaft from Table 1
d0 [m] Effective diameter of the transmission element
Q2 FzW = FW · a2 Geared motor output torque (from selection tables)
M2 [Nm]
or required calculated output torque

FzL [N] Permissible overhung load for output shaft bearings

2 · M2
Q3 FQvorh = d0
· fz FzW [N] Permissible overhung load for output shaft
FrN [N] Permissible overhung load from selection tables

Permissible overhung load -

FW [N]
FQvorh ≤ FzL Output shaft x=l/2 from Table 2

FQvorh [N] Existing overhung load at gear shaft

Q4 fz Factor for transmission element

FQvorh ≤ FzW Mmax [Nm]

Highest possible output torque
for coupling operation (Table 2)

Always use both equations Q1 and Q2 for your calculations.

Output shaft Hollow shaft K
l l
x/l
x x
0 0.25 0.5 0.75 1 1.5 2
Ød

a1 → Equation Q1
Fr Fr
1.39 1.18 1.00 0.85 0.73 0.52 0.38

a 2 → Equation Q2

2.00 2.00 1.00 0.55 0.38 0.23 0.17

Table 1: Load action factors a1, a2

Intermediate values can be interpolated linearly. Combined load (Fr ≠ 0; Fa = 0) on request.

Output shaft Output torque M2 [Nm]

[mm] Mmax
110 200 400 600 820 1550 3000 4500 8000 13000 18000
at Fr = 0
Ød l F w [kN] at x/l = 0.5 → Equation Q2

20 40 160 2.6

25 50 300 5.6 4.8

30 60 500 7.5 7.1 5.0

35 70 800 11.0 10.0 8.3

40 80 1170 13.0 12.0 10.7

50 100 2250 24.0 24.0 23.0 20.0

60 120 3740 31.0 30.0 23.0

70 140 5850 44.0 41.0 36.0

90 170 11700 72.0 70.0 61.0

110 210 20800 106.0 103.0 93.0

120 210 26700 129.0 121.0 109.0

Table 2: Permissible overhung load - output shaft x = l/2

The axial loads (FaN) for the respective execution (output shaft or hollow shaft), given in the following selection tables,
are valid at radial force FrN = 0. If there are axial loads or radial and axial components acting on the drive which are
extraordinarily high, we recommend to contact the manufacturer.

www.weg.net WG20 Gear Units and Geared Motors 359

 7. Mounting positions, Position of the terminal box and Cable entry
Mounting positions - Sizes K02 to K05
Gear units K02 to K05 are not ventilated and supplied with lifetime lubrication

Reference area

M1

M6 M2

M4 M5

M3

Position of the terminal box Cable entry Side indication

Standard: Position 1 Standard: Position I

2
I III
III
III
I

1 3 II IV
B A
I
III I
III I
4

360 WG20 Gear Units and Geared Motors www.weg.net

 Mounting positions - Sizes K06 to K15

Venting screw Position visible on this side

Oil drain screw Position covered or on the

far side of the gear unit
Oil level plug

Reference area
K06-K07

M1
K08-K15

K06-K08
K10-K15
M6 M2

K
K09

K09
K10-K15

K08-K15

M4 M5
K06-K08
K06 and K07
on request

M3

K06-K07

K08-K15

Position of the terminal box Cable entry Side indication

Standard: Position 1 Standard: Position I

2
I III
III
III
I

1 3 II IV
B A
I
III I
III I
4

www.weg.net WG20 Gear Units and Geared Motors 361

K

362 WG20 Gear Units and Geared Motors www.weg.net

Selection tables - Geared motors
The technical data of the geared motors shown in the selection tables apply to an ambient temperature of +20 °C.

The selection tables are calculated with following motor data:

Power (IEC frame size) Motor series (IE class)

up to 0.55 kW (63 - 80) 14P (IE3) - aluminium

0.75 - 9.2 kW (80 - 132) 11P (IE3) - aluminium

11 - 75 kW (160 - 250) 22P (IE3) - cast iron

75 - 110 kW (280) 22S (IE4) - cast iron

Structure of the selection tables

1 2

PN = 0.12 kW IE3
50 Hz 60 Hz at 50 Hz

0.12 kW 0.14 kW Output shaft Hollow shaft Dimension K

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min -1
min -1
Nm kN kN kN kN kg

3 4 5 6 7 8 9 10 11 12 13 14

1 Rated power of the motor

2 Given values are based on the respective efficiency class

3 Output speed at 50 Hz

4 Output speed at 60 Hz

5 Output torque

6 Service factor

7 Total ratio

8 Permissible radial load - Execution with output shaft at midpoint of the shaft (standard bearing) at axial load=0

9 Permissible axial load - Execution with output shaft (standard bearing) at axial load=0

10 Permissible radial load - Execution with hollow shaft at midpoint of x=l/2 (standard bearing) at axial load=0

11 Permissible axial load - Execution with hollow shaft (standard bearing) at axial load=0

12 Geared motor type

13 Weight

14 Page refererence for dimension sheet

*) Increased rated power at 60 Hz can only be reached together with increased voltage within the wide range
(for details see page 574).
Increased rated power

1.2 x PN

www.weg.net WG20 Gear Units and Geared Motors 363

 PN = 0.12 kW IE3
50 Hz 60 Hz at 50 Hz

0.12 kW 0.14 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.07 0.08 15132 1.20 14005.40 88.3 118.5 88.3 118.5
0.08 0.10 12185 1.50 11453.02 96.1 120.7 96.1 120.7
0.10 0.13 9400 1.95 9043.42 101.5 122.8 101.5 122.8
KH155-14P-63-06F 677 492
0.12 0.14 8100 2.25 7915.09 103.5 123.8 103.5 123.8
0.13 0.16 7065 2.55 7012.05 104.9 124.6 104.9 124.6
0.15 0.18 6167 2.95 6249.84 105.9 125.3 105.9 125.3
0.10 0.12 9609 1.90 14005.40 101.2 122.7 101.2 122.7
0.12 0.15 7677 2.35 11453.02 104.1 124.1 104.1 124.1 KH155-14P-63-04E 677 492
0.15 0.18 6321 2.85 9679.02 105.7 125.2 105.7 125.2
0.51 0.63 1918 2.35 1810.95 38.0 42.6 38.0 42.6
0.60 0.74 1588 2.85 1531.00 38.6 43.0 38.6 43.0 KH094-14P-63-06F 158 478
0.62 0.77 1529 2.95 1480.92 38.7 43.1 38.7 43.1
0.42 0.52 2444 1.25 2205.52 23.2 41.4 23.2 8.9
0.51 0.63 1974 1.55 1803.58 25.6 42.1 25.6 9.6
0.53 0.65 1907 1.60 1745.64 25.8 42.2 25.8 9.7
0.61 0.75 1648 1.85 1524.22 26.8 42.6 26.8 10.1
0.65 0.80 1530 2.00 1424.12 27.2 42.7 27.2 10.2
KH084-14P-63-06F 108 474
0.65 0.80 1534 2.00 1427.51 27.2 42.7 27.2 10.2
K 0.74 0.91 1323 2.30 1246.44 27.8 43.0 27.8 10.5
0.82 1.0 1184 2.55 1127.18 28.1 43.3 28.1 10.8
0.84 1.0 1157 2.60 1104.23 28.2 43.3 28.2 10.8
0.94 1.2 1014 3.00 984.20 28.5 43.5 28.5 11.0
0.64 0.78 1563 1.95 2205.52 27.1 42.7 27.1 10.2
0.78 0.95 1255 2.40 1803.58 27.9 43.1 27.9 10.6
KH084-14P-63-04E 108 474
0.80 0.99 1209 2.50 1745.64 28.1 43.2 28.1 10.7
0.92 1.1 1038 2.90 1524.22 28.4 43.5 28.4 11.0
3.8 4.6 304 2.00 245.70 8.9 11.1 8.9 4.4
KH053-14P-63-06F 21 466
4.8 5.9 241 2.50 194.73 9.3 11.3 9.3 4.6
5.7 7.0 200 3.00 245.70 9.4 11.4 9.4 4.7 KH053-14P-63-04E 21 466
3.3 4.1 344 1.20 277.79 4.9 8.1 4.9 2.5
4.1 5.0 281 1.45 227.16 5.7 8.4 5.7 2.8
5.2 6.4 222 1.80 179.37 6.2 8.6 6.2 3.0 KH043-14P-63-06F 18 464
6.7 8.2 172 2.35 139.08 6.6 8.8 6.6 3.2
8.1 10 141 2.85 113.83 6.7 8.9 6.7 3.3
5.1 6.2 227 1.80 277.79 6.2 8.6 6.2 3.0
6.2 7.6 185 2.20 227.16 6.5 8.8 6.5 3.2 KH043-14P-63-04E 17 464
7.8 9.6 146 2.75 179.37 6.7 8.9 6.7 3.3
5.2 6.4 220 0.95 177.19 3.4 2.4 3.4 2.4
6.6 8.1 174 1.15 140.80 4.1 2.7 4.1 2.7
8.5 10 135 1.50 108.75 4.6 2.9 4.6 2.9
11 13 108 1.90 86.83 4.8 3.0 4.8 3.0 KH033-14P-63-06F 14 462
13 16 89 2.25 71.93 4.9 3.1 4.9 3.1
14 17 81 2.50 65.63 4.9 3.2 4.9 3.2
16 19 72 2.80 58.50 5.0 3.2 5.0 3.2
6.4 7.9 178 1.15 217.88 4.1 2.6 4.1 2.6
7.9 9.7 145 1.40 177.19 4.5 2.8 4.5 2.8
10 12 115 1.75 140.80 4.7 3.0 4.7 3.0 KH033-14P-63-04E 14 462
13 16 89 2.30 108.75 4.9 3.1 4.9 3.1
16 20 71 2.85 86.83 5.0 3.3 5.0 3.3
13 17 85 1.30 68.88 5.1 2.8 5.1 2.8
15 18 77 1.35 61.75 5.1 2.8 5.1 2.8
17 21 66 1.70 53.65 5.2 2.8 5.2 2.8
19 24 60 1.85 48.10 5.2 2.8 5.2 2.8
21 26 54 2.05 43.50 5.2 2.8 5.2 2.8 KH022-14P-63-06F 12 460
24 29 48 2.30 39.00 5.2 2.8 5.2 2.8
27 33 42 2.60 34.27 5.3 2.8 5.3 2.8
30 37 38 1.35 30.88 5.3 2.8 5.3 2.8
38 47 30 2.75 24.05 5.3 2.8 5.3 2.8

Legend see page 363

364 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.12 kW IE3
50 Hz 60 Hz at 50 Hz

0.12 kW 0.14 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
20 25 56 2.00 68.88 5.2 2.8 5.2 2.8
23 28 50 2.05 61.75 5.2 2.8 5.2 2.8
26 32 44 2.55 53.65 5.2 2.8 5.2 2.8
29 36 39 2.85 48.10 5.3 2.8 5.3 2.8
32 40 35 3.15 43.50 5.3 2.8 5.3 2.8
36 44 32 3.50 39.00 5.3 2.8 5.3 2.8
41 50 28 3.95 34.27 5.3 2.8 5.3 2.8
45 56 25 2.05 30.88 5.3 2.8 5.3 2.8
46 56 25 4.40 30.73 5.3 2.8 5.3 2.8
53 65 22 5.15 26.41 5.3 2.8 5.3 2.8
58 72 20 4.15 24.05 5.3 2.8 5.3 2.8
59 73 19 5.70 23.68 5.3 2.8 5.3 2.8
68 83 17 6.15 20.63 5.3 2.8 5.3 2.8
KH022-14P-63-04E 12 460
72 88 16 5.10 19.50 5.3 2.8 5.3 2.8
76 93 15 6.80 18.50 5.3 2.8 5.3 2.8
91 112 13 6.50 15.36 5.3 2.8 5.3 2.8
102 125 11 8.30 13.81 5.3 2.8 5.3 2.8
119 145 10 8.40 11.84 5.1 2.8 5.1 2.8
121 148 9 9.00 11.60 5.0 2.8 5.0 2.8 K
135 165 8 10.05 10.40 4.8 2.8 4.8 2.8
152 186 8 10.75 9.25 4.7 2.8 4.7 2.8
165 202 7 11.10 8.51 4.5 2.8 4.5 2.8
184 225 6 12.40 7.63 4.4 2.8 4.4 2.8
203 249 6 13.15 6.91 4.2 2.8 4.2 2.8
270 331 4 15.35 5.20 3.8 2.8 3.8 2.8
368 450 3 18.30 3.82 3.5 2.8 3.5 2.8

Legend see page 363

www.weg.net WG20 Gear Units and Geared Motors 365

 PN = 0.18 kW IE3
50 Hz 60 Hz at 50 Hz

0.18 kW 0.22 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.06 0.08 23812 0.80 14005.40 ** ** ** **
0.08 0.10 19324 0.95 11453.02 72.3 115.3 72.3 115.3
0.09 0.11 16164 1.15 9679.02 85.0 117.7 85.0 117.7
0.10 0.12 15064 1.20 9043.42 88.5 118.5 88.5 118.5
0.11 0.14 13049 1.40 7915.09 94.1 120.0 94.1 120.0
0.13 0.16 11442 1.60 7012.05 97.7 121.3 97.7 121.3 KH155-14P-71-06E 680 492
0.14 0.18 10093 1.80 6249.84 100.4 122.3 100.4 122.3
0.16 0.19 9173 2.00 5739.09 101.9 123.0 101.9 123.0
0.19 0.23 7586 2.40 4845.97 104.2 124.2 104.2 124.2
0.20 0.25 6826 2.65 4417.59 105.1 124.8 105.1 124.8
0.23 0.28 6018 3.00 3966.24 106.0 125.4 106.0 125.4
0.10 0.12 15214 1.20 14005.40 88.1 118.4 88.1 118.4
0.12 0.15 12251 1.50 11453.02 96.0 120.7 96.0 120.7
0.14 0.18 10194 1.80 9679.02 100.2 122.2 100.2 122.2
0.15 0.19 9476 1.90 9043.42 101.4 122.8 101.4 122.8 KH155-14P-63-04F 677 492
0.17 0.21 8144 2.25 7915.09 103.5 123.8 103.5 123.8
0.20 0.24 7103 2.55 7012.05 104.8 124.6 104.8 124.6
0.22 0.27 6217 2.90 6249.84 105.8 125.3 105.8 125.3
K 0.50 0.61 3062 1.50 1810.95 34.9 41.1 34.9 41.1
0.59 0.73 2557 1.80 1531.00 36.5 41.7 36.5 41.7
0.61 0.75 2468 1.85 1480.92 36.7 41.9 36.7 41.9
KH094-14P-71-06E 161 478
0.72 0.89 2057 2.20 1251.99 37.7 42.4 37.7 42.4
0.77 0.95 1905 2.40 1169.35 38.1 42.6 38.1 42.6
0.91 1.1 1580 2.85 988.58 38.6 43.0 38.6 43.0
0.76 0.94 1928 2.35 1810.95 38.0 42.5 38.0 42.5
0.90 1.1 1596 2.85 1531.00 38.6 43.0 38.6 43.0 KH094-14P-63-04F 158 478
0.93 1.1 1538 2.95 1480.92 38.7 43.0 38.7 43.0
0.41 0.50 3838 0.80 2205.52 ** ** ** **
0.50 0.62 3113 1.00 1803.58 18.4 32.2 18.4 7.9
0.52 0.64 3013 1.00 1745.64 19.3 34.1 19.3 8.0
0.59 0.73 2615 1.15 1524.22 22.2 40.5 22.2 8.6
0.63 0.78 2439 1.25 1427.51 23.3 41.4 23.3 8.9
0.72 0.89 2112 1.45 1246.44 25.0 41.9 25.0 9.4
KH084-14P-71-06E 111 474
0.80 0.98 1898 1.60 1127.18 25.9 42.2 25.9 9.7
0.82 1.0 1856 1.65 1104.23 26.1 42.3 26.1 9.8
0.91 1.1 1640 1.85 984.20 26.8 42.6 26.8 10.1
1.0 1.2 1494 2.05 903.77 27.3 42.8 27.3 10.3
1.2 1.5 1241 2.45 763.13 28.0 43.2 28.0 10.7
1.3 1.6 1156 2.60 715.32 28.2 43.3 28.2 10.8
0.63 0.77 2457 1.25 2205.52 23.2 41.4 23.2 8.9
0.77 0.94 1985 1.55 1803.58 25.5 42.1 25.5 9.6
0.79 0.97 1917 1.60 1745.64 25.8 42.2 25.8 9.7
0.91 1.1 1657 1.85 1524.22 26.8 42.6 26.8 10.1
KH084-14P-63-04F 108 474
0.97 1.2 1545 1.95 1427.51 27.1 42.7 27.1 10.2
1.1 1.4 1330 2.30 1246.44 27.8 43.0 27.8 10.5
1.2 1.5 1190 2.55 1127.18 28.1 43.2 28.1 10.7
1.4 1.7 1022 2.95 984.20 28.5 43.5 28.5 11.0
4.5 5.6 378 2.20 198.00 11.7 14.1 11.7 4.1
KH063-14P-71-06E 37 468
5.7 7.1 300 2.75 156.92 12.0 14.3 12.0 4.4
3.7 4.5 469 1.30 245.70 7.7 10.6 7.7 3.9
4.6 5.7 372 1.65 194.73 8.5 10.9 8.5 4.2
KH053-14P-71-06E 23 466
6.0 7.3 289 2.10 151.20 9.0 11.1 9.0 4.4
7.3 8.9 237 2.55 124.06 9.3 11.3 9.3 4.6
5.6 6.9 306 2.00 245.70 8.9 11.1 8.9 4.4
KH053-14P-63-04F 21 466
7.1 8.7 243 2.50 194.73 9.2 11.3 9.2 4.6
3.2 4.0 531 0.80 277.79 ** ** ** **
4.0 4.9 434 0.95 227.16 2.9 4.1 2.9 2.2
5.0 6.2 343 1.20 179.37 4.9 8.1 4.9 2.5
6.5 8.0 266 1.55 139.08 5.8 8.4 5.8 2.8
KH043-14P-71-06E 20 464
7.9 9.8 217 1.85 113.83 6.3 8.6 6.3 3.0
10 12 170 2.25 89.17 6.6 8.8 6.6 3.2
12 15 139 2.90 72.92 6.7 8.9 6.7 3.3
19 24 90 2.25 47.07 6.9 9.0 6.9 3.4

366 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.18 kW IE3
50 Hz 60 Hz at 50 Hz

0.18 kW 0.22 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
5.0 6.1 346 1.20 277.79 4.8 8.1 4.8 2.5
6.1 7.5 283 1.45 227.16 5.7 8.4 5.7 2.8
7.7 9.5 223 1.80 179.37 6.2 8.6 6.2 3.0 KH043-14P-63-04F 17 464
9.9 12 173 2.35 139.08 6.6 8.8 6.6 3.2
12 15 142 2.85 113.83 6.7 8.9 6.7 3.3
8.3 10 208 1.00 108.75 3.6 2.5 3.6 2.5
10 13 166 1.25 86.83 4.2 2.7 4.2 2.7
13 15 137 1.50 71.93 4.5 2.9 4.5 2.9
14 17 125 1.60 65.63 4.6 2.9 4.6 2.9
15 19 112 1.80 58.50 4.8 3.0 4.8 3.0
KH033-14P-71-06E 16 462
18 22 95 2.10 49.88 4.9 3.1 4.9 3.1
19 24 89 2.30 46.48 4.9 3.1 4.9 3.1
23 29 74 2.70 38.80 5.0 3.2 5.0 3.2
25 31 69 2.95 35.90 5.0 3.3 5.0 3.3
30 37 57 2.30 29.97 5.0 3.2 5.0 3.2
7.8 9.6 221 0.95 177.19 3.3 2.4 3.3 2.4
9.8 12 175 1.15 140.80 4.1 2.7 4.1 2.7
13 16 135 1.50 108.75 4.6 2.9 4.6 2.9
16 20 108 1.85 86.83 4.8 3.0 4.8 3.0 KH033-14P-63-04F 14 462 K
19 24 90 2.25 71.93 4.9 3.1 4.9 3.1
21 26 82 2.45 65.63 4.9 3.2 4.9 3.2
24 29 73 2.75 58.50 5.0 3.2 5.0 3.2
13 16 132 0.85 68.88 4.8 2.8 4.8 2.8
15 18 118 0.90 61.75 4.9 2.8 4.9 2.8
17 21 102 1.10 53.65 5.0 2.8 5.0 2.8
19 23 92 1.20 48.10 5.0 2.8 5.0 2.8
21 26 83 1.35 43.50 5.1 2.8 5.1 2.8
23 28 74 1.50 39.00 5.1 2.8 5.1 2.8
26 32 65 1.70 34.27 5.2 2.8 5.2 2.8
29 36 59 1.90 30.73 5.2 2.8 5.2 2.8 KH022-14P-71-06E 14 460
34 42 50 2.20 26.41 5.2 2.8 5.2 2.8
37 46 46 1.80 24.05 5.2 2.8 5.2 2.8
38 47 45 2.45 23.68 5.2 2.8 5.2 2.8
44 54 39 2.65 20.63 5.3 2.8 5.3 2.8
46 57 37 2.20 19.50 5.3 2.8 5.3 2.8
49 60 35 2.90 18.50 5.3 2.8 5.3 2.8
59 72 29 2.80 15.36 5.3 2.8 5.3 2.8
20 25 86 1.30 68.88 5.1 2.8 5.1 2.8
22 28 77 1.35 61.75 5.1 2.8 5.1 2.8
26 32 67 1.65 53.65 5.2 2.8 5.2 2.8
29 35 60 1.85 48.10 5.2 2.8 5.2 2.8
32 39 54 2.05 43.50 5.2 2.8 5.2 2.8
35 44 49 2.30 39.00 5.2 2.8 5.2 2.8
40 50 43 2.60 34.27 5.3 2.8 5.3 2.8
45 55 38 2.90 30.73 5.3 2.8 5.3 2.8
52 64 33 3.35 26.41 5.3 2.8 5.3 2.8
57 71 30 2.75 24.05 5.3 2.8 5.3 2.8
58 72 29 3.75 23.68 5.3 2.8 5.3 2.8
67 82 26 4.05 20.63 5.3 2.8 5.3 2.8
71 87 24 3.35 19.50 5.3 2.8 5.3 2.8 KH022-14P-63-04F 12 460
75 92 23 4.45 18.50 5.3 2.8 5.3 2.8
90 110 19 4.85 15.41 5.3 2.8 5.3 2.8
100 123 17 5.45 13.81 5.3 2.8 5.3 2.8
117 144 15 5.50 11.84 5.1 2.8 5.1 2.8
119 147 14 5.90 11.60 5.1 2.8 5.1 2.8
133 163 13 6.60 10.40 4.9 2.8 4.9 2.8
149 184 12 7.05 9.25 4.7 2.8 4.7 2.8
162 200 11 7.30 8.51 4.6 2.8 4.6 2.8
181 223 10 8.15 7.63 4.4 2.8 4.4 2.8
200 246 9 8.60 6.91 4.3 2.8 4.3 2.8
265 327 6 10.05 5.20 3.9 2.8 3.9 2.8
361 445 5 12.00 3.82 3.5 2.8 3.5 2.8

Legend see page 363

www.weg.net WG20 Gear Units and Geared Motors 367

 PN = 0.25 kW IE3
50 Hz 60 Hz at 50 Hz

0.25 kW 0.33 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.10 0.12 21485 0.85 9679.02 60.5 104.6 60.5 104.6
0.11 0.13 20023 0.90 9043.42 68.8 114.7 68.8 114.7
0.12 0.15 17390 1.05 7915.09 80.6 116.7 80.6 116.7
0.14 0.17 15288 1.20 7012.05 87.9 118.3 87.9 118.3
0.15 0.19 13521 1.35 6249.84 92.9 119.7 92.9 119.7
0.17 0.21 12321 1.50 5739.09 95.8 120.6 95.8 120.6 KH155-14P-80-06D 680 492
0.20 0.24 10244 1.80 4845.97 100.1 122.2 100.1 122.2
0.22 0.27 9266 1.95 4417.59 101.8 122.9 101.8 122.9
0.24 0.30 8212 2.20 3966.24 103.4 123.7 103.4 123.7
0.29 0.36 6733 2.70 3337.74 105.3 124.9 105.3 124.9
0.31 0.39 6063 3.00 3052.96 106.0 125.4 106.0 125.4
0.10 0.12 21514 0.85 14005.40 60.3 104.2 60.3 104.2
0.12 0.15 17414 1.05 11453.02 80.5 116.7 80.5 116.7
0.14 0.18 14566 1.25 9679.02 90.0 118.9 90.0 118.9
0.15 0.19 13540 1.35 9043.42 92.8 119.7 92.8 119.7
0.17 0.21 11729 1.55 7915.09 97.1 121.1 97.1 121.1
KH155-14P-71-04E 678 492
0.20 0.24 10258 1.80 7012.05 100.1 122.2 100.1 122.2
0.22 0.27 9048 2.00 6249.84 102.1 123.1 102.1 123.1
K 0.24 0.30 8223 2.20 5739.09 103.4 123.7 103.4 123.7
0.28 0.35 6765 2.70 4845.97 105.2 124.8 105.2 124.8
0.31 0.38 6071 3.00 4417.59 106.0 125.4 106.0 125.4
0.73 0.91 2712 2.95 1301.54 60.3 66.1 60.3 66.1 KH104-14P-80-06D 290 482
0.53 0.65 4066 1.15 1810.95 30.5 39.8 30.5 39.8
0.62 0.77 3409 1.35 1531.00 33.6 40.7 33.6 40.7
0.64 0.80 3291 1.40 1480.92 34.0 40.8 34.0 40.8
0.76 0.95 2754 1.65 1251.99 35.9 41.5 35.9 41.5
0.82 1.0 2556 1.80 1169.35 36.5 41.7 36.5 41.7 KH094-14P-80-06D 161 478
0.97 1.2 2130 2.15 988.58 37.6 42.3 37.6 42.3
1.1 1.3 1937 2.35 906.69 38.0 42.5 38.0 42.5
1.2 1.5 1607 2.80 766.52 38.6 43.0 38.6 43.0
1.3 1.6 1546 2.95 742.09 38.7 43.0 38.7 43.0
0.76 0.94 2757 1.65 1810.95 35.9 41.5 35.9 41.5
0.90 1.1 2297 2.00 1531.00 37.2 42.1 37.2 42.1
0.93 1.1 2217 2.05 1480.92 37.4 42.2 37.4 42.2 KH094-14P-71-04E 159 478
1.1 1.4 1844 2.45 1251.99 38.2 42.7 38.2 42.7
1.2 1.5 1708 2.65 1169.35 38.4 42.8 38.4 42.8
0.55 0.68 3976 0.80 1745.64 ** ** ** **
0.63 0.78 3458 0.90 1524.22 14.6 24.1 14.6 7.4
0.67 0.83 3232 0.95 1427.51 17.2 29.6 17.2 7.7
0.77 0.95 2804 1.10 1246.44 20.9 37.7 20.9 8.4
0.85 1.1 2526 1.20 1127.18 22.8 41.3 22.8 8.8
0.86 1.1 2469 1.25 1104.23 23.1 41.4 23.1 8.9
0.97 1.2 2187 1.40 984.20 24.6 41.8 24.6 9.3 KH084-14P-80-06D 111 474
1.1 1.3 2000 1.50 903.77 25.5 42.0 25.5 9.5
1.3 1.6 1668 1.80 763.13 26.7 42.5 26.7 10.0
1.4 1.7 1508 2.00 695.67 27.2 42.8 27.2 10.3
1.5 1.9 1340 2.25 624.59 27.7 43.0 27.7 10.5
1.7 2.2 1164 2.60 550.61 28.2 43.3 28.2 10.8
1.8 2.3 1104 2.75 525.61 28.3 43.4 28.3 10.9
0.63 0.77 3462 0.90 2205.52 14.6 24.1 14.6 7.4
0.77 0.94 2808 1.10 1803.58 20.9 37.7 20.9 8.4
0.79 0.97 2712 1.15 1745.64 21.6 39.2 21.6 8.5
0.91 1.1 2354 1.30 1524.22 23.8 41.5 23.8 9.0
0.97 1.2 2190 1.40 1424.12 24.6 41.8 24.6 9.3
0.97 1.2 2195 1.40 1427.51 24.6 41.8 24.6 9.3
1.1 1.4 1901 1.60 1246.44 25.9 42.2 25.9 9.7
KH084-14P-71-04E 109 474
1.2 1.5 1705 1.80 1127.18 26.6 42.5 26.6 10.0
1.4 1.7 1474 2.05 984.20 27.4 42.8 27.4 10.3
1.5 1.9 1342 2.25 903.77 27.7 43.0 27.7 10.5
1.6 1.9 1292 2.35 873.98 27.8 43.1 27.8 10.6
1.8 2.2 1112 2.70 763.13 28.3 43.4 28.3 10.9
1.9 2.4 1032 2.95 715.32 28.4 43.5 28.4 11.0
2.0 2.4 1001 3.00 695.67 28.5 43.5 28.5 11.0

368 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.25 kW IE3
50 Hz 60 Hz at 50 Hz

0.25 kW 0.33 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
3.7 4.6 640 2.45 256.14 19.7 17.7 19.7 6.4 KH073-14P-80-06D 57 470
4.8 6.0 495 1.70 198.00 11.2 13.7 11.2 3.7
6.1 7.6 392 2.10 156.92 11.7 14.0 11.7 4.1
7.8 9.7 305 2.70 121.85 12.0 14.3 12.0 4.3 KH063-14P-80-06D 37 468
12 15 204 2.85 81.53 12.3 14.6 12.3 4.7
22 27 111 2.85 44.35 12.4 14.8 11.4 4.8
7,0 8.6 343 2.40 198.00 11.9 14.2 11.9 4.2 KH063-14P-71-04E 35 468
3.9 4.8 614 1.00 245.70 5.9 9.9 5.9 3.4
4.9 6.1 487 1.25 194.73 7.5 10.5 7.5 3.8
6.3 7.8 378 1.60 151.20 8.5 10.9 8.5 4.2
7.7 9.6 310 1.95 124.06 8.9 11.1 8.9 4.4 KH053-14P-80-06D 24 466
9.9 12 240 2.50 96.08 9.3 11.3 9.3 4.6
12 15 201 2.85 80.46 9.4 11.4 9.4 4.7
25 31 96 2.80 38.32 9.7 11.6 9.7 4.9
5.6 6.9 425 1.45 245.70 8.1 10.7 8.1 4.0
7.1 8.7 337 1.80 194.73 8.8 11.0 8.8 4.3
KH053-14P-71-04E 22 466
9.1 11 262 2.30 151.20 9.2 11.2 9.2 4.5
11 14 215 2.80 124.06 9.4 11.4 9.4 4.7
5.3 6.6 448 0.90 179.37 2.4 3.0 2.4 2.1 K
6.9 8.5 348 1.20 139.08 4.8 8.1 4.8 2.5
8.4 10 285 1.45 113.83 5.6 8.4 5.6 2.8
11 13 223 1.70 89.17 6.2 8.6 6.2 3.0
13 16 182 2.20 72.92 6.5 8.8 6.5 3.2
KH043-14P-80-06D 21 464
14 18 166 2.45 66.20 6.6 8.8 6.6 3.2
17 21 144 2.80 57.58 6.7 8.9 6.7 3.3
18 22 135 3.00 54.18 6.7 9.0 6.7 3.4
20 25 118 1.70 47.07 6.8 8.9 6.8 3.3
25 31 96 2.85 38.49 6.9 9.0 6.9 3.4
5.0 6.1 481 0.85 277.79 ** ** ** **
6.1 7.5 393 1.05 227.16 4.0 6.4 4.0 2.3
7.7 9.5 310 1.30 179.37 5.3 8.3 5.3 2.7
9.9 12 241 1.70 139.08 6.1 8.5 6.1 2.9
KH043-14P-71-04E 18 464
12 15 197 2.05 113.83 6.4 8.7 6.4 3.1
15 19 154 2.50 89.17 6.7 8.9 6.7 3.3
16 19 152 2.65 87.62 6.7 8.9 6.7 3.3
29 36 81 2.50 47.07 6.9 9.1 6.9 3.5
11 14 217 0.95 86.83 3.4 2.4 3.4 2.4
13 16 180 1.15 71.93 4.0 2.6 4.0 2.6
15 18 164 1.25 65.63 4.2 2.7 4.2 2.7
16 20 146 1.40 58.50 4.4 2.8 4.4 2.8
19 24 125 1.65 49.88 4.6 2.9 4.6 2.9
21 26 116 1.75 46.48 4.7 3.0 4.7 3.0 KH033-14P-80-06D 17 462
25 31 97 2.10 38.80 4.9 3.1 4.9 3.1
27 33 90 2.25 35.90 4.9 3.1 4.9 3.1
32 39 76 2.65 30.29 5.0 3.2 5.0 3.2
33 41 72 2.80 28.67 5.0 3.2 5.0 3.2
39 49 61 2.65 24.38 5.0 3.2 5.0 3.2
9.8 12 244 0.85 140.80 2.8 2.3 2.8 2.3
13 16 188 1.10 108.75 3.9 2.6 3.9 2.6
16 20 150 1.35 86.83 4.4 2.8 4.4 2.8
19 24 124 1.65 71.93 4.7 2.9 4.7 2.9
21 26 114 1.80 65.63 4.7 3.0 4.7 3.0
KH033-14P-71-04E 15 462
24 29 101 2.00 58.50 4.8 3.1 4.8 3.1
28 34 86 2.35 49.88 4.9 3.2 4.9 3.2
30 37 80 2.50 46.48 4.9 3.2 4.9 3.2
36 44 67 3.00 38.80 5.0 3.3 5.0 3.3
46 57 52 2.50 29.97 5.1 3.3 5.1 3.3

Legend see page 363 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 369

 PN = 0.25 kW IE3
50 Hz 60 Hz at 50 Hz

0.25 kW 0.33 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
18 22 134 0.85 53.65 4.7 2.8 4.7 2.8
20 25 120 0.95 48.10 4.9 2.8 4.9 2.8
22 27 109 1.05 43.50 4.9 2.8 4.9 2.8
24 30 98 1.15 39.00 5.0 2.8 5.0 2.8
28 35 86 1.30 34.27 5.1 2.8 5.1 2.8
31 39 77 1.45 30.73 5.1 2.8 5.1 2.8
36 45 66 1.70 26.41 5.2 2.8 5.2 2.8
40 49 60 1.35 24.05 5.2 2.8 5.2 2.8
46 57 52 2.00 20.63 5.2 2.8 5.2 2.8 KH022-14P-80-06D 15 460
49 61 49 1.70 19.50 5.2 2.8 5.2 2.8
52 64 46 2.25 18.50 5.2 2.8 5.2 2.8
62 77 39 2.45 15.41 5.3 2.8 5.3 2.8
69 86 35 2.70 13.81 5.3 2.8 5.3 2.8
72 89 33 2.70 13.29 5.3 2.8 5.3 2.8
80 99 30 3.00 11.92 5.3 2.8 5.3 2.8
81 100 30 2.75 11.84 5.3 2.8 5.3 2.8
82 102 29 2.95 11.60 5.3 2.8 5.3 2.8
20 25 119 0.95 68.88 4.9 2.8 4.9 2.8
K 22 28 107 1.00 61.75 5.0 2.8 5.0 2.8
26 32 93 1.20 53.65 5.0 2.8 5.0 2.8
29 35 83 1.35 48.10 5.1 2.8 5.1 2.8
32 39 75 1.50 43.50 5.1 2.8 5.1 2.8
35 44 67 1.65 39.00 5.2 2.8 5.2 2.8
40 50 59 1.90 34.27 5.2 2.8 5.2 2.8
45 55 53 2.10 30.73 5.2 2.8 5.2 2.8
52 64 46 2.45 26.41 5.2 2.8 5.2 2.8
57 71 42 1.95 24.05 5.3 2.8 5.3 2.8
58 72 41 2.70 23.68 5.3 2.8 5.3 2.8
67 82 36 2.90 20.63 5.3 2.8 5.3 2.8
71 87 34 2.45 19.50 5.3 2.8 5.3 2.8 KH022-14P-71-04E 13 460
75 92 32 3.20 18.50 5.3 2.8 5.3 2.8
90 110 27 3.50 15.41 5.3 2.8 5.3 2.8
100 123 24 3.90 13.81 5.3 2.8 5.3 2.8
117 144 20 4.00 11.84 5.1 2.8 5.1 2.8
119 147 20 4.25 11.60 5.1 2.8 5.1 2.8
133 163 18 4.75 10.40 4.9 2.8 4.9 2.8
149 184 16 5.10 9.25 4.7 2.8 4.7 2.8
162 200 15 5.25 8.51 4.6 2.8 4.6 2.8
181 223 13 5.85 7.63 4.4 2.8 4.4 2.8
200 246 12 6.20 6.91 4.3 2.8 4.3 2.8
265 327 9 7.25 5.20 3.9 2.8 3.9 2.8
361 445 7 8.65 3.82 3.5 2.8 3.5 2.8

Legend see page 363

370 WG20 Gear Units and Geared Motors www.weg.net

PN = 0.37 kW IE3
50 Hz 60 Hz at 50 Hz

0.37 kW 0.44 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.13 0.16 23844 0.80 7012.05 ** ** ** **
0.15 0.18 21198 0.85 6249.84 62.2 108.2 62.2 108.2
0.16 0.20 19366 0.95 5739.09 72.1 115.2 72.1 115.2
0.19 0.24 16185 1.15 4845.97 84.9 117.6 84.9 117.6
0.21 0.26 14679 1.25 4417.59 89.7 118.8 89.7 118.8
0.23 0.29 13078 1.40 3966.24 94.0 120.0 94.0 120.0 KH155-14P-80-06E 682 492
0.28 0.34 10837 1.70 3337.74 99.0 121.7 99.0 121.7
0.30 0.37 9835 1.85 3052.96 100.8 122.5 100.8 122.5
0.34 0.42 8687 2.10 2731.65 102.7 123.4 102.7 123.4
0.40 0.49 7166 2.55 2306.68 104.7 124.5 104.7 124.5
0.42 0.51 6846 2.65 2215.09 105.1 124.8 105.1 124.8
0.14 0.18 21768 0.85 9679.02 58.6 100.6 58.6 100.6
0.15 0.19 20287 0.90 9043.42 67.4 114.5 67.4 114.5
0.18 0.22 17620 1.05 7915.09 79.7 116.6 79.7 116.6
0.20 0.24 15490 1.20 7012.05 87.2 118.2 87.2 118.2
0.22 0.27 13700 1.35 6249.84 92.4 119.5 92.4 119.5
0.24 0.30 12516 1.45 5739.09 95.4 120.4 95.4 120.4 KH155-14P-71-04F 679 492
0.29 0.35 10406 1.75 4845.97 99.8 122.1 99.8 122.1
0.32 0.39 9388 1.95 4417.59 101.6 122.8 101.6 122.8 K
0.35 0.43 8320 2.20 3966.24 103.2 123.7 103.2 123.7
0.42 0.51 6840 2.65 3337.74 105.1 124.8 105.1 124.8
0.46 0.56 6159 2.95 3052.96 105.9 125.3 105.9 125.3
0.59 0.72 5115 2.55 1579.81 86.7 92.4 86.7 92.4
KH124-14P-80-06E 415 486
0.67 0.83 4377 3.00 1377.44 87.4 93.1 87.4 93.1
0.71 0.88 4338 1.85 1301.54 57.7 64.2 57.7 64.2
0.82 1.0 3712 2.20 1129.81 58.8 64.9 58.8 64.9
0.92 1.1 3267 2.45 1004.85 59.5 65.4 59.5 65.4 KH104-14P-80-06E 292 482
0.95 1.2 3161 2.55 976.16 59.7 65.6 59.7 65.6
1.1 1.3 2783 2.90 872.27 60.2 66.0 60.2 66.0
1.1 1.3 2748 2.95 1301.54 60.3 66.0 60.3 66.0 KH104-14P-71-04F 289 482
0.60 0.74 5318 0.85 1531.00 21.4 36.0 21.4 36.0
0.62 0.77 5133 0.90 1480.92 23.2 38.5 23.2 38.5
0.74 0.91 4313 1.05 1251.99 29.1 39.5 29.1 39.5
0.79 0.97 4012 1.15 1169.35 30.8 39.9 30.8 39.9
0.94 1.2 3364 1.35 988.58 33.8 40.7 33.8 40.7
KH094-14P-80-06E 163 478
1.0 1.3 3066 1.50 906.69 34.9 41.1 34.9 41.1
1.2 1.5 2560 1.80 766.52 36.5 41.7 36.5 41.7
1.5 1.8 2061 2.20 627.37 37.7 42.4 37.7 42.4
1.6 2.0 1857 2.45 571.21 38.1 42.6 38.1 42.6
1.9 2.4 1538 2.95 482.91 38.7 43.0 38.7 43.0
0.77 0.94 4128 1.10 1810.95 30.2 39.7 30.2 39.7
0.91 1.1 3462 1.30 1531.00 33.4 40.6 33.4 40.6
0.94 1.2 3341 1.35 1480.92 33.8 40.8 33.8 40.8
1.1 1.4 2790 1.65 1251.99 35.8 41.5 35.8 41.5
1.2 1.5 2595 1.75 1169.35 36.4 41.7 36.4 41.7 KH094-14P-71-04F 160 478
1.4 1.7 2162 2.10 988.58 37.5 42.3 37.5 42.3
1.5 1.9 1967 2.30 906.69 37.9 42.5 37.9 42.5
1.8 2.2 1629 2.80 766.52 38.6 42.9 38.6 42.9
1.9 2.3 1570 2.90 742.09 38.7 43.0 38.7 43.0
0.82 1.0 3923 0.80 1127.18 ** ** ** **
0.84 1.0 3843 0.80 1104.23 ** ** ** **
0.94 1.2 3412 0.90 984.20 15.2 25.4 15.2 7.5
1.0 1.3 3120 1.00 903.77 18.3 32.0 18.3 7.9
1.1 1.3 3017 1.00 873.98 19.2 33.9 19.2 8.0
1.2 1.5 2618 1.15 763.13 22.2 40.5 22.2 8.6
1.3 1.6 2444 1.25 715.32 23.2 41.4 23.2 8.9
KH084-14P-80-06E 113 474
1.5 1.8 2117 1.45 624.59 24.9 41.9 24.9 9.4
1.7 2.1 1851 1.65 550.61 26.1 42.3 26.1 9.8
1.8 2.2 1759 1.75 525.61 26.4 42.4 26.4 9.9
1.9 2.4 1599 1.90 480.77 27.0 42.6 27.0 10.1
2.2 2.7 1416 2.15 430.17 27.5 42.9 27.5 10.4
2.5 3.1 1174 2.60 363.25 28.1 43.3 28.1 10.8
2.7 3.3 1122 2.70 348.82 28.2 43.3 28.2 10.8

www.weg.net WG20 Gear Units and Geared Motors 371

 PN = 0.37 kW IE3
50 Hz 60 Hz at 50 Hz

0.37 kW 0.44 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.92 1.1 3503 0.90 1524.22 14.0 22.8 14.0 7.3
0.98 1.2 3274 0.95 1427.51 16.8 28.8 16.8 7.7
1.1 1.4 2841 1.10 1246.44 20.6 37.0 20.6 8.3
1.2 1.5 2559 1.20 1127.18 22.6 41.2 22.6 8.7
1.3 1.5 2507 1.20 1104.23 22.9 41.3 22.9 8.8
1.4 1.7 2216 1.40 984.20 24.5 41.7 24.5 9.2
1.5 1.9 2027 1.50 903.77 25.3 42.0 25.3 9.5
KH084-14P-71-04F 110 474
1.6 2.0 1956 1.55 873.98 25.6 42.1 25.6 9.6
1.8 2.2 1690 1.80 763.13 26.7 42.5 26.7 10.0
2.0 2.4 1574 1.95 715.32 27.0 42.7 27.0 10.2
2.2 2.7 1358 2.25 624.59 27.7 43.0 27.7 10.5
2.5 3.1 1182 2.55 550.61 28.1 43.3 28.1 10.8
2.7 3.3 1121 2.70 525.61 28.2 43.3 28.2 10.8
2.9 3.6 1013 3.00 480.77 28.5 43.5 28.5 11.0
3.6 4.5 978 1.60 256.14 18.5 17.0 18.5 5.7
4.7 5.8 755 2.10 197.75 19.3 17.4 19.3 6.2 KH073-14P-80-06E 59 470
5.6 6.9 634 2.45 165.85 19.7 17.7 19.7 6.4
5.4 6.7 649 2.40 256.14 19.6 17.7 19.6 6.4 KH073-14P-71-04F 56 470
K 4.7 5.8 756 1.10 198.00 9.2 12.9 9.2 2.9
5.9 7.3 599 1.40 156.92 10.6 13.4 10.6 3.4
7.6 9.4 465 1.80 121.85 11.4 13.8 11.4 3.8
9.3 11 382 2.15 99.98 11.7 14.0 11.7 4.1 KH063-14P-80-06E 39 468
11 14 311 1.85 81.53 12.0 14.3 12.0 4.3
12 15 296 2.80 77.42 12.0 14.3 12.0 4.4
21 26 169 1.85 44.35 12.3 14.5 11.9 4.5
7.0 8.6 502 1.65 198.00 11.2 13.7 11.2 3.7
8.9 11 397 2.10 156.92 11.7 14.0 11.7 4.0
11 14 309 2.70 121.85 12.0 14.3 12.0 4.3 KH063-14P-71-04F 36 468
17 21 207 2.80 81.53 12.3 14.6 12.3 4.6
31 39 112 2.80 44.35 12.4 14.7 10.2 4.8
4.8 5.9 744 0.85 194.73 2.5 2.7 2.5 2.7
6.1 7.5 578 1.05 151.20 6.4 10.3 6.4 3.6
7.5 9.2 474 1.30 124.06 7.7 10.6 7.7 3.9
9.6 12 367 1.65 96.08 8.6 10.9 8.6 4.2
KH053-14P-80-06E 26 466
11 14 307 1.85 80.46 8.9 11.1 8.9 4.4
13 16 279 2.15 73.08 9.1 11.2 9.1 4.5
15 18 244 2.50 63.77 9.2 11.3 9.2 4.6
24 30 146 1.85 38.32 9.6 11.3 9.6 4.6
5.7 7.0 622 1.00 245.70 5.7 9.5 5.7 3.4
7.2 8.8 493 1.25 194.73 7.5 10.5 7.5 3.8
9.2 11 383 1.60 151.20 8.5 10.8 8.5 4.1
11 14 314 1.95 124.06 8.9 11.0 8.9 4.3 KH053-14P-71-04F 23 466
15 18 243 2.50 96.08 9.2 11.3 9.2 4.6
17 21 204 2.80 80.46 9.4 11.4 9.4 4.7
36 45 97 2.80 38.32 9.7 11.6 9.7 4.9
6.7 8.2 531 0.80 139.08 ** ** ** **
8.1 10 435 0.95 113.83 2.9 4.1 2.9 2.2
10 13 341 1.15 89.17 4.9 8.1 4.9 2.5
11 13 335 1.20 87.62 5.0 8.2 5.0 2.6
13 16 279 1.45 72.92 5.7 8.4 5.7 2.8
14 17 253 1.60 66.20 6.0 8.5 6.0 2.9
16 20 220 1.85 57.58 6.2 8.6 6.2 3.0 KH043-14P-80-06E 22 464
17 21 207 1.95 54.18 6.3 8.7 6.3 3.1
20 24 180 1.15 47.07 6.5 8.6 6.5 3.0
21 26 171 2.35 44.64 6.6 8.8 6.6 3.2
24 30 147 1.85 38.49 6.7 8.7 6.7 3.1
25 31 140 2.75 36.78 6.7 8.9 6.7 3.3
30 38 116 2.80 30.39 6.8 8.9 6.8 3.3

Legend see page 363 ** ... on request

372 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.37 kW IE3
50 Hz 60 Hz at 50 Hz

0.37 kW 0.44 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
7.8 9.5 454 0.90 179.37 2.1 2.4 2.1 2.1
10 12 352 1.15 139.08 4.7 8.0 4.7 2.5
12 15 288 1.40 113.83 5.6 8.3 5.6 2.7
16 19 226 1.70 89.17 6.2 8.6 6.2 3.0
19 23 185 2.20 72.92 6.5 8.8 6.5 3.2
KH043-14P-71-04F 19 464
21 26 168 2.40 66.20 6.6 8.8 6.6 3.2
24 30 146 2.75 57.58 6.7 8.9 6.7 3.3
26 32 137 2.95 54.18 6.7 9.0 6.7 3.4
30 36 119 1.70 47.07 6.8 8.9 6.8 3.3
36 44 97 2.80 38.49 6.9 9.0 6.9 3.4
14 17 251 0.80 65.63 ** ** ** **
16 19 223 0.90 58.50 3.3 2.4 3.3 2.4
19 23 191 1.05 49.88 3.9 2.6 3.9 2.6
20 25 178 1.15 46.48 4.1 2.6 4.1 2.6
24 29 148 1.35 38.80 4.4 2.8 4.4 2.8
26 32 137 1.50 35.90 4.5 2.9 4.5 2.9
KH033-14P-80-06E 19 462
31 38 116 1.75 30.29 4.7 3.0 4.7 3.0
32 40 110 1.85 28.67 4.8 3.0 4.8 3.0
38 47 93 1.75 24.38 4.9 3.0 4.9 3.0 K
43 53 83 2.45 21.67 4.9 3.2 4.9 3.2
48 59 74 2.25 19.37 5.0 3.1 5.0 3.1
62 76 57 2.90 14.96 5.0 3.2 5.0 3.2
16 20 220 0.95 86.83 3.4 2.4 3.4 2.4
19 24 182 1.10 71.93 4.0 2.6 4.0 2.6
21 26 166 1.25 65.63 4.2 2.7 4.2 2.7
24 29 148 1.35 58.50 4.4 2.8 4.4 2.8
28 34 126 1.60 49.88 4.6 2.9 4.6 2.9
30 37 118 1.70 46.48 4.7 3.0 4.7 3.0 KH033-14P-71-04F 16 462
36 44 98 2.05 38.80 4.8 3.1 4.8 3.1
39 48 91 2.20 35.90 4.9 3.1 4.9 3.1
47 57 76 1.70 29.97 5.0 3.1 5.0 3.1
49 60 73 2.80 28.67 5.0 3.2 5.0 3.2
57 70 62 2.60 24.38 5.0 3.2 5.0 3.2
27 33 131 0.85 34.27 4.8 2.8 4.8 2.8
30 37 117 0.95 30.73 4.9 2.8 4.9 2.8
35 43 101 1.10 26.41 5.0 2.8 5.0 2.8
38 47 92 0.90 24.05 5.0 2.8 5.0 2.8
39 48 90 1.25 23.68 5.1 2.8 5.1 2.8
45 55 79 1.35 20.63 5.1 2.8 5.1 2.8
47 58 74 1.10 19.50 5.1 2.8 5.1 2.8
50 62 71 1.45 18.50 5.2 2.8 5.2 2.8
60 74 59 1.60 15.41 5.2 2.8 5.2 2.8
KH022-14P-80-06E 17 460
67 83 53 1.80 13.81 5.2 2.8 5.2 2.8
70 86 51 1.80 13.29 5.2 2.8 5.2 2.8
78 96 45 1.80 11.84 5.2 2.8 5.2 2.8
80 98 44 1.95 11.60 5.2 2.8 5.2 2.8
89 110 40 2.15 10.40 5.3 2.8 5.3 2.8
100 123 35 2.30 9.25 5.3 2.8 5.3 2.8
109 134 33 2.40 8.51 5.3 2.8 5.3 2.8
121 149 29 2.65 7.63 5.1 2.8 5.1 2.8
134 165 26 2.85 6.91 4.9 2.8 4.9 2.8

Legend see page 363 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 373

 PN = 0.37 kW IE3
50 Hz 60 Hz at 50 Hz

0.37 kW 0.44 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
26 32 136 0.85 53.65 4.7 2.8 4.7 2.8
29 36 122 0.95 48.10 4.8 2.8 4.8 2.8
32 39 110 1.00 43.50 4.9 2.8 4.9 2.8
36 44 99 1.15 39.00 5.0 2.8 5.0 2.8
41 50 87 1.30 34.27 5.1 2.8 5.1 2.8
45 56 78 1.45 30.73 5.1 2.8 5.1 2.8
53 65 67 1.65 26.41 5.2 2.8 5.2 2.8
58 71 61 1.35 24.05 5.2 2.8 5.2 2.8
59 72 60 1.85 23.68 5.2 2.8 5.2 2.8
68 83 52 2.00 20.63 5.2 2.8 5.2 2.8
72 88 49 1.65 19.50 5.2 2.8 5.2 2.8
75 92 47 2.20 18.50 5.2 2.8 5.2 2.8 KH022-14P-71-04F 14 460
91 111 39 2.40 15.41 5.3 2.8 5.3 2.8
101 124 35 2.70 13.81 5.3 2.8 5.3 2.8
118 144 30 2.75 11.84 5.2 2.8 5.2 2.8
120 147 29 2.90 11.60 5.1 2.8 5.1 2.8
134 164 26 3.25 10.40 4.9 2.8 4.9 2.8
151 185 23 3.50 9.25 4.7 2.8 4.7 2.8
K 164 201 22 3.60 8.51 4.6 2.8 4.6 2.8
183 224 19 4.00 7.63 4.4 2.8 4.4 2.8
202 247 18 4.25 6.91 4.3 2.8 4.3 2.8
268 329 13 4.95 5.20 3.9 2.8 3.9 2.8
365 448 10 5.90 3.82 3.5 2.8 3.5 2.8

Legend see page 363

374 WG20 Gear Units and Geared Motors www.weg.net

PN = 0.55 kW IE3
50 Hz 60 Hz at 50 Hz

0.55 kW 0.66 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.21 0.26 21801 0.85 4417.59 58.4 100.2 58.4 100.2
0.24 0.29 19474 0.95 3966.24 71.6 115.1 71.6 115.1
0.28 0.35 16221 1.15 3337.74 84.8 117.6 84.8 117.6
0.31 0.38 14761 1.25 3052.96 89.5 118.7 89.5 118.7
0.35 0.42 13106 1.40 2731.65 93.9 120.0 93.9 120.0
0.41 0.50 10925 1.65 2306.68 98.8 121.7 98.8 121.7 KH155-14P-L80-06F 683 492
0.43 0.52 10437 1.75 2215.09 99.7 122.0 99.7 122.0
0.50 0.61 8735 2.10 1887.82 102.6 123.3 102.6 123.3
0.51 0.62 8580 2.10 1854.30 102.8 123.5 102.8 123.5
0.62 0.75 6884 2.65 1530.83 105.1 124.7 105.1 124.7
0.63 0.77 6740 2.70 1502.83 105.2 124.9 105.2 124.9
0.20 0.25 23088 0.80 7012.05 ** ** ** **
0.23 0.28 20474 0.90 6249.84 66.4 114.4 66.4 114.4
0.25 0.30 18704 1.00 5739.09 75.2 115.7 75.2 115.7
0.29 0.35 15672 1.15 4845.97 86.6 118.0 86.6 118.0
0.32 0.39 14177 1.30 4417.59 91.1 119.2 91.1 119.2
0.36 0.43 12631 1.45 3966.24 95.1 120.4 95.1 120.4 KH155-14P-80-04E 681 492
0.43 0.52 10466 1.75 3337.74 99.7 122.0 99.7 122.0
0.47 0.56 9499 1.90 3052.96 101.4 122.8 101.4 122.8 K
0.52 0.63 8390 2.15 2731.65 103.1 123.6 103.1 123.6
0.62 0.75 6903 2.65 2306.68 105.1 124.7 105.1 124.7
0.64 0.78 6594 2.75 2215.09 105.4 125.0 105.4 125.0
0.72 0.88 6051 3.00 1308.92 106.0 125.4 106.0 125.4 KH154-14P-L80-06F 670 490
0.60 0.73 7710 1.70 1579.81 83.2 89.8 83.2 89.8
0.69 0.84 6639 2.00 1377.44 84.8 90.8 84.8 90.8
0.77 0.95 5818 2.25 1219.69 85.9 91.7 85.9 91.7
KH124-14P-L80-06F 416 486
0.80 0.97 5636 2.35 1186.50 86.1 91.9 86.1 91.9
0.89 1.1 4989 2.65 1063.46 86.8 92.5 86.8 92.5
0.92 1.1 4779 2.75 1022.92 87.0 92.7 87.0 92.7
0.90 1.1 4932 2.65 1579.81 86.9 92.6 86.9 92.6 KH124-14P-80-04E 414 486
0.73 0.89 6471 1.25 1301.54 51.9 61.8 51.9 61.8
0.84 1.0 5571 1.45 1129.81 54.7 62.8 54.7 62.8
0.94 1.1 4914 1.65 1004.85 56.4 63.6 56.4 63.6
0.97 1.2 4764 1.70 976.16 56.7 63.7 56.7 63.7
KH104-14P-L80-06F 293 482
1.1 1.3 4222 1.90 872.27 57.9 64.3 57.9 64.3
1.3 1.5 3595 2.25 753.64 59.0 65.1 59.0 65.1
1.4 1.7 3109 2.60 661.38 59.8 65.6 59.8 65.6
1.5 1.8 2953 2.75 632.05 60.0 65.8 60.0 65.8
1.1 1.3 4184 1.95 1301.54 58.0 64.4 58.0 64.4
1.3 1.5 3587 2.25 1129.81 59.0 65.1 59.0 65.1
1.4 1.7 3150 2.55 1004.85 59.7 65.6 59.7 65.6 KH104-14P-80-04E 291 482
1.5 1.8 3048 2.65 976.16 59.9 65.7 59.9 65.7
1.6 2.0 2684 3.00 872.27 60.3 66.1 60.3 66.1
0.81 0.99 5922 0.80 1169.35 ** ** ** **
0.96 1.2 4976 0.95 988.58 24.5 38.7 24.5 38.7
1.0 1.3 4554 1.00 906.69 27.6 39.2 27.6 39.2
1.2 1.5 3819 1.20 766.52 31.8 40.1 31.8 40.1
1.3 1.6 3689 1.25 742.09 32.4 40.3 32.4 40.3
1.5 1.8 3087 1.50 627.37 34.8 41.1 34.8 41.1 KH094-14P-L80-06F 164 478
1.7 2.0 2793 1.65 571.21 35.8 41.4 35.8 41.4
2.0 2.4 2332 1.95 482.91 37.1 42.0 37.1 42.0
2.2 2.7 2063 2.20 431.58 37.7 42.4 37.7 42.4
2.6 3.2 1712 2.65 364.86 38.4 42.8 38.4 42.8
2.7 3.3 1650 2.75 353.21 38.5 42.9 38.5 42.9
0.93 1.1 5139 0.90 1531.00 23.1 38.5 23.1 38.5
0.96 1.2 4960 0.95 1480.92 24.6 38.7 24.6 38.7
1.1 1.4 4168 1.10 1251.99 29.9 39.7 29.9 39.7
1.2 1.5 3877 1.20 1169.35 31.5 40.1 31.5 40.1
1.4 1.7 3251 1.40 988.58 34.2 40.9 34.2 40.9 KH094-14P-80-04E 162 478
1.6 1.9 2963 1.55 906.69 35.2 41.2 35.2 41.2
1.9 2.2 2474 1.85 766.52 36.7 41.9 36.7 41.9
2.3 2.7 1987 2.30 627.37 37.9 42.5 37.9 42.5
2.5 3.0 1791 2.55 571.21 38.3 42.7 38.3 42.7

www.weg.net WG20 Gear Units and Geared Motors 375

 PN = 0.55 kW IE3
50 Hz 60 Hz at 50 Hz

0.55 kW 0.66 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
1.2 1.5 3865 0.80 763.13 ** ** ** **
1.3 1.6 3615 0.85 715.32 12.4 19.5 12.4 7.2
1.4 1.7 3509 0.90 695.67 13.9 22.6 13.9 7.3
1.5 1.8 3137 1.00 624.59 18.1 31.6 18.1 7.9
1.7 2.1 2754 1.10 550.61 21.3 38.5 21.3 8.4
1.8 2.2 2624 1.15 525.61 22.2 40.5 22.2 8.6
2.0 2.4 2385 1.30 480.77 23.6 41.5 23.6 9.0
2.2 2.7 2121 1.45 430.17 24.9 41.9 24.9 9.4
2.3 2.8 2047 1.50 416.02 25.3 42.0 25.3 9.5 KH084-14P-L80-06F 114 474
2.6 3.2 1773 1.70 363.25 26.4 42.4 26.4 9.9
2.7 3.3 1695 1.80 348.82 26.6 42.5 26.6 10.0
2.8 3.4 1651 1.85 340.47 26.8 42.6 26.8 10.1
3.2 3.9 1424 2.15 297.29 27.5 42.9 27.5 10.4
3.4 4.2 1314 2.30 276.09 27.8 43.1 27.8 10.6
3.9 4.8 1129 2.70 241.07 28.2 43.3 28.2 10.8
4.0 4.9 1106 2.75 236.66 28.3 43.4 28.3 10.9
4.1 5.0 1078 2.80 231.12 28.3 43.4 28.3 10.9
1.3 1.5 3799 0.80 1127.18 ** ** ** **
K 1.4 1.7 3297 0.95 984.20 16.5 28.1 16.5 7.6
1.6 1.9 3021 1.00 903.77 19.2 33.9 19.2 8.0
1.9 2.3 2530 1.20 763.13 22.7 41.3 22.7 8.8
2.0 2.4 2362 1.30 715.32 23.7 41.5 23.7 9.0
2.3 2.8 2045 1.50 624.59 25.3 42.0 25.3 9.5
2.6 3.1 1788 1.70 550.61 26.3 42.4 26.3 9.9
KH084-14P-80-04E 112 474
2.7 3.3 1700 1.80 525.61 26.6 42.5 26.6 10.0
3.0 3.6 1545 1.95 480.77 27.1 42.7 27.1 10.2
3.3 4.0 1368 2.20 430.17 27.6 43.0 27.6 10.5
3.4 4.1 1318 2.30 416.02 27.8 43.1 27.8 10.6
3.9 4.7 1134 2.65 363.25 28.2 43.3 28.2 10.8
4.1 4.9 1082 2.80 348.82 28.3 43.4 28.3 10.9
4.2 5.1 1054 2.85 340.47 28.4 43.4 28.4 10.9
4.6 5.6 1146 2.65 206.12 28.2 43.3 28.2 10.8 KH083-14P-L80-06F 101 472
3.7 4.5 1424 1.10 256.14 16.1 16.1 16.1 4.8
4.8 5.8 1099 1.45 197.75 18.0 16.7 18.0 5.5
5.7 7.0 922 1.70 165.85 18.8 17.1 18.8 5.8
7.3 8.9 723 2.15 130.16 19.4 17.5 19.4 6.3 KH073-14P-L80-06F 60 470
9.4 11 558 2.80 100.45 19.9 17.8 19.4 6.6
9.5 12 555 2.35 99.87 19.9 17.9 19.4 6.6
20 24 264 2.35 47.56 20.3 18.2 14.6 6.9
5.5 6.7 947 1.65 256.14 18.7 17.0 18.7 5.8
7.2 8.7 731 2.15 197.75 19.4 17.5 19.4 6.2 KH073-14P-80-04E 58 470
8.6 10 613 2.55 165.85 19.7 17.7 19.7 6.5
6.0 7.4 872 0.95 156.92 7.9 12.5 7.9 2.6
7.8 9.5 677 1.25 121.85 10.0 13.1 10.0 3.2
9.5 12 556 1.50 99.98 10.8 13.5 10.8 3.5
12 14 453 1.30 81.53 11.4 13.8 11.4 3.9
15 18 359 2.30 64.62 11.8 14.1 11.8 4.2 KH063-14P-L80-06F 40 468
16 20 327 2.55 58.89 11.9 14.2 11.9 4.3
19 23 279 2.95 50.17 12.1 14.4 12.1 4.4
21 26 247 1.30 44.35 12.2 14.2 12.2 4.2
27 33 195 2.35 35.15 12.3 14.4 11.2 4.4
7.2 8.7 732 1.15 198.00 9.5 12.9 9.5 3.0
9.0 11 580 1.45 156.92 10.7 13.4 10.7 3.5
12 14 451 1.85 121.85 11.4 13.8 11.4 3.9
14 17 370 2.25 99.98 11.8 14.1 11.8 4.1 KH063-14P-80-04E 38 468
17 21 302 1.90 81.53 12.0 14.3 12.0 4.4
18 22 286 2.90 77.42 12.1 14.3 12.1 4.4
32 39 164 1.90 44.35 12.3 14.5 10.4 4.6

Legend see page 363 ** ... on request

376 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.55 kW IE3
50 Hz 60 Hz at 50 Hz

0.55 kW 0.66 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
7.6 9.3 690 0.90 124.06 4.3 6.5 4.3 3.2
9.8 12 534 1.15 96.08 7.0 10.4 7.0 3.7
12 14 447 1.30 80.46 7.9 10.6 7.9 3.9
13 16 406 1.50 73.08 8.3 10.8 8.3 4.1
15 18 354 1.70 63.77 8.6 10.9 8.6 4.2
KH053-14P-L80-06F 27 466
16 19 335 1.80 60.26 8.8 11.0 8.8 4.3
19 23 275 2.20 49.52 9.1 11.2 9.1 4.5
23 28 233 2.60 42.00 9.3 11.3 9.3 4.6
25 30 213 1.30 38.32 9.4 11.0 9.4 4.3
31 38 169 2.35 30.37 9.5 11.2 9.5 4.5
7.3 8.8 720 0.85 194.73 3.4 4.6 3.4 3.1
9.4 11 559 1.10 151.20 6.7 10.3 6.7 3.6
11 14 459 1.35 124.06 7.8 10.6 7.8 3.9
15 18 355 1.70 96.08 8.6 10.9 8.6 4.2
18 21 298 1.90 80.46 9.0 11.1 9.0 4.4 KH084-14P-80-04E 25 474
19 24 270 2.25 73.08 9.1 11.2 9.1 4.5
22 27 236 2.55 63.77 9.3 11.3 9.3 4.6
24 29 223 2.70 60.26 9.3 11.3 9.3 4.6
37 45 142 1.90 38.32 9.6 11.4 9.6 4.7 K
11 13 496 0.80 89.17 ** ** ** **
13 16 405 1.00 72.92 3.7 5.8 3.7 2.3
14 17 368 1.10 66.20 4.5 7.5 4.5 2.4
16 20 320 1.25 57.58 5.2 8.2 5.2 2.6
17 21 301 1.35 54.18 5.4 8.3 5.4 2.7
20 25 262 0.80 47.07 ** ** ** **
21 26 248 1.65 44.64 6.0 8.5 6.0 2.9
22 26 244 1.65 43.93 6.0 8.5 6.0 2.9 KH043-14P-L80-06F 24 464
25 30 214 1.30 38.49 6.3 8.4 6.3 2.8
26 31 204 1.90 36.78 6.4 8.7 6.4 3.1
31 38 169 1.95 30.39 6.6 8.6 6.6 3.0
32 39 166 2.20 29.81 6.6 8.8 6.6 3.2
34 41 156 2.60 28.13 6.6 8.9 6.6 3.3
40 49 131 2.35 23.57 6.8 8.8 6.8 3.2
49 60 107 2.75 19.29 6.9 8.9 6.9 3.3
10 12 514 0.80 139.08 ** ** ** **
12 15 421 1.00 113.83 3.3 4.9 3.3 2.2
16 19 330 1.15 89.17 5.1 8.2 5.1 2.6
19 24 270 1.50 72.92 5.8 8.4 5.8 2.8
21 26 245 1.65 66.20 6.0 8.5 6.0 2.9
25 30 213 1.90 57.58 6.3 8.6 6.3 3.0
KH084-14P-80-04E 21 474
26 32 200 2.00 54.18 6.4 8.7 6.4 3.1
30 37 174 1.15 47.07 6.5 8.6 6.5 3.0
32 39 165 2.45 44.64 6.6 8.8 6.6 3.2
37 45 142 1.90 38.49 6.7 8.8 6.7 3.2
39 47 136 2.85 36.78 6.7 9.0 6.7 3.4
47 57 112 2.90 30.39 6.8 8.9 6.8 3.3
20 25 258 0.80 46.48 ** ** ** **
24 30 216 0.95 38.80 3.4 2.4 3.4 2.4
26 32 200 1.05 35.90 3.7 2.5 3.7 2.5
31 38 168 1.20 30.29 4.2 2.7 4.2 2.7
32 39 167 0.80 29.97 ** ** ** **
33 40 159 1.30 28.67 4.3 2.7 4.3 2.7
39 47 136 1.20 24.38 4.6 2.7 4.6 2.7 KH033-14P-L80-06F 20 462
44 53 120 1.70 21.67 4.7 3.0 4.7 3.0
49 60 108 1.55 19.37 4.8 2.9 4.8 2.9
57 70 92 2.20 16.47 4.9 3.1 4.9 3.1
63 77 83 2.00 14.96 4.9 3.1 4.9 3.1
74 90 71 2.85 12.81 5.0 3.2 5.0 3.2
79 97 66 2.50 11.94 5.0 3.2 5.0 3.2

Legend see page 363 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 377

 PN = 0.55 kW IE3
50 Hz 60 Hz at 50 Hz

0.55 kW 0.66 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
20 24 266 0.80 71.93 ** ** ** **
22 26 243 0.85 65.63 2.8 2.3 2.8 2.3
24 29 216 0.95 58.50 3.4 2.4 3.4 2.4
28 34 185 1.10 49.88 4.0 2.6 4.0 2.6
31 37 172 1.20 46.48 4.1 2.7 4.1 2.7
37 44 144 1.40 38.80 4.5 2.8 4.5 2.8
40 48 133 1.55 35.90 4.6 2.9 4.6 2.9 KH033-14P-80-04E 18 462
47 57 112 1.80 30.29 4.7 3.0 4.7 3.0
50 60 106 1.90 28.67 4.8 3.1 4.8 3.1
58 71 90 1.80 24.38 4.9 3.0 4.9 3.0
66 79 80 2.50 21.67 4.9 3.2 4.9 3.2
73 89 72 2.30 19.37 5.0 3.1 5.0 3.1
95 115 55 2.95 14.96 5.1 3.3 5.1 3.3
40 49 132 0.85 23.68 4.8 2.8 4.8 2.8
46 56 115 0.90 20.63 4.9 2.8 4.9 2.8
51 62 103 1.00 18.50 5.0 2.8 5.0 2.8
61 75 86 1.10 15.41 5.1 2.8 5.1 2.8
62 75 85 0.95 15.36 5.1 2.8 5.1 2.8
K 68 84 77 1.25 13.81 5.1 2.8 5.1 2.8
71 87 74 1.25 13.29 5.1 2.8 5.1 2.8
79 97 66 1.35 11.92 5.2 2.8 5.2 2.8
80 98 66 1.25 11.84 5.2 2.8 5.2 2.8
KH022-14P-L80-06F 18 460
81 100 64 1.35 11.60 5.2 2.8 5.2 2.8
91 111 58 1.50 10.40 5.2 2.8 5.2 2.8
102 125 51 1.60 9.25 5.2 2.8 5.2 2.8
111 136 47 1.65 8.51 5.2 2.8 5.2 2.8
124 151 42 1.85 7.63 5.1 2.8 5.1 2.8
137 167 38 1.95 6.91 4.9 2.8 4.9 2.8
159 194 33 2.10 5.96 4.7 2.8 4.7 2.8
182 222 29 2.25 5.20 4.5 2.8 4.5 2.8
247 302 21 2.70 3.82 4.0 2.8 4.0 2.8
36 44 144 0.80 39.00 ** ** ** **
41 50 127 0.90 34.27 4.8 2.8 4.8 2.8
46 56 114 1.00 30.73 4.9 2.8 4.9 2.8
54 65 98 1.15 26.41 5.0 2.8 5.0 2.8
59 72 89 0.95 24.05 5.1 2.8 5.1 2.8
60 73 88 1.30 23.68 5.1 2.8 5.1 2.8
69 83 76 1.35 20.63 5.1 2.8 5.1 2.8
73 88 72 1.15 19.50 5.1 2.8 5.1 2.8
77 93 68 1.50 18.50 5.2 2.8 5.2 2.8
92 112 57 1.65 15.41 5.2 2.8 5.2 2.8
103 125 51 1.85 13.81 5.2 2.8 5.2 2.8
107 129 49 1.85 13.29 5.2 2.8 5.2 2.8 KH022-14P-80-04E 16 460
119 144 44 2.05 11.92 5.2 2.8 5.2 2.8
120 145 44 1.85 11.84 5.2 2.8 5.2 2.8
122 148 43 2.00 11.60 5.2 2.8 5.2 2.8
137 165 38 2.25 10.40 4.9 2.8 4.9 2.8
154 186 34 2.40 9.25 4.7 2.8 4.7 2.8
167 202 31 2.45 8.51 4.6 2.8 4.6 2.8
186 225 28 2.75 7.63 4.4 2.8 4.4 2.8
205 249 26 2.90 6.91 4.3 2.8 4.3 2.8
238 289 22 3.15 5.96 4.1 2.8 4.1 2.8
273 331 19 3.40 5.20 3.9 2.8 3.9 2.8
372 450 14 4.05 3.82 3.5 2.8 3.5 2.8

Legend see page 363 ** ... on request

378 WG20 Gear Units and Geared Motors www.weg.net

PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.28 0.34 22639 0.80 3337.74 ** ** ** **
0.31 0.38 20602 0.90 3052.96 65.7 114.3 65.7 114.3
0.34 0.42 18339 1.00 2731.65 76.7 116.0 76.7 116.0
0.41 0.50 15328 1.20 2306.68 87.7 118.3 87.7 118.3
0.42 0.52 14682 1.25 2215.09 89.7 118.8 89.7 118.8
0.50 0.61 12353 1.50 1887.82 95.7 120.6 95.7 120.6 KH155-11P-90S/L-06E 689 492
0.51 0.62 12133 1.50 1854.30 96.2 120.7 96.2 120.7
0.61 0.75 9837 1.85 1530.83 100.8 122.5 100.8 122.5
0.63 0.76 9632 1.90 1502.83 101.2 122.7 101.2 122.7
0.73 0.89 8066 2.25 1281.49 103.6 123.8 103.6 123.8
0.91 1.10 6336 2.85 1038.59 105.7 125.2 105.7 125.2
0.30 0.36 21551 0.85 4845.97 60.0 103.6 60.0 103.6
0.32 0.39 19546 0.95 4417.59 71.2 115.1 71.2 115.1
0.36 0.44 17459 1.05 3966.24 80.3 116.7 80.3 116.7
0.43 0.52 14542 1.25 3337.74 90.1 118.9 90.1 118.9
0.47 0.57 13199 1.40 3052.96 93.7 119.9 93.7 119.9
0.52 0.64 11719 1.55 2731.65 97.1 121.1 97.1 121.1 KH155-11P-80-04F 683 492
0.62 0.75 9744 1.85 2306.68 101.0 122.6 101.0 122.6
0.65 0.79 9309 1.95 2215.09 101.7 122.9 101.7 122.9 K
0.76 0.92 7770 2.35 1887.82 104.0 124.1 104.0 124.1
0.77 0.94 7612 2.40 1854.30 104.2 124.2 104.2 124.2
0.93 1.1 6107 2.95 1530.83 105.9 125.3 105.9 125.3
0.72 0.87 8613 2.10 1308.92 102.8 123.4 102.8 123.4
0.83 1.0 7296 2.50 1127.36 104.6 124.4 104.6 124.4
KH154-11P-90S/L-06E 676 490
0.91 1.1 6635 2.75 1035.99 105.4 124.9 105.4 124.9
0.96 1.2 6193 2.95 975.12 105.8 125.3 105.8 125.3
0.60 0.72 10767 1.25 1579.81 76.9 86.7 76.9 86.7
0.68 0.83 9330 1.40 1377.44 80.2 88.1 80.2 88.1
0.77 0.94 8194 1.60 1219.69 82.3 89.3 82.3 89.3
0.79 0.97 7954 1.65 1186.50 82.8 89.5 82.8 89.5
0.88 1.1 7071 1.85 1063.46 84.2 90.4 84.2 90.4
KH154-11P-90S/L-06E 422 490
0.92 1.1 6773 1.95 1022.92 84.6 90.7 84.6 90.7
1.0 1.2 6003 2.20 916.04 85.6 91.5 85.6 91.5
1.1 1.3 5832 2.25 891.88 85.9 91.7 85.9 91.7
1.2 1.4 5185 2.55 802.79 86.6 92.3 86.6 92.3
1.3 1.6 4446 2.95 699.95 87.3 93.0 87.3 93.0
0.91 1.1 6890 1.90 1579.81 84.4 90.6 84.4 90.6
1.0 1.3 5933 2.20 1377.44 85.7 91.6 85.7 91.6
KH124-11P-80-04F 416 486
1.2 1.4 5178 2.55 1219.69 86.6 92.3 86.6 92.3
1.3 1.6 4440 2.95 1063.46 87.3 93.1 87.3 93.1
0.72 0.88 8999 0.90 1301.54 40.4 58.9 40.4 58.9
0.83 1.0 7764 1.05 1129.81 46.9 60.3 46.9 60.3
0.94 1.1 6863 1.20 1004.85 50.5 61.3 50.5 61.3
0.96 1.2 6667 1.20 976.16 51.3 61.6 51.3 61.6
1.1 1.3 5908 1.40 872.27 53.7 62.4 53.7 62.4
1.2 1.5 5063 1.60 753.64 56.0 63.4 56.0 63.4
1.3 1.6 4904 1.65 731.54 56.4 63.6 56.4 63.6
KH104-11P-90S/L-06E 299 482
1.4 1.7 4397 1.85 661.38 57.5 64.1 57.5 64.1
1.5 1.8 4185 1.95 632.05 58.0 64.4 58.0 64.4
1.6 2.0 3770 2.15 574.12 58.7 64.9 58.7 64.9
1.8 2.2 3310 2.45 510.43 59.5 65.4 59.5 65.4
1.9 2.3 3210 2.50 496.04 59.6 65.5 59.6 65.5
2.1 2.6 2826 2.85 443.08 60.2 65.9 60.2 65.9
2.2 2.7 2676 3.00 422.20 60.3 66.1 60.3 66.1
1.1 1.3 5795 1.40 1301.54 54.1 62.5 54.1 62.5
1.3 1.5 4979 1.65 1129.81 56.2 63.5 56.2 63.5
1.4 1.7 4392 1.85 1004.85 57.5 64.1 57.5 64.1
1.5 1.8 4258 1.90 976.16 57.8 64.3 57.8 64.3
1.6 2.0 3765 2.15 872.27 58.7 64.9 58.7 64.9 KH104-11P-80-04F 293 482
1.7 2.1 3623 2.25 842.74 59.0 65.0 59.0 65.0
1.9 2.3 3206 2.50 753.64 59.6 65.5 59.6 65.5
2.0 2.4 3099 2.60 731.54 59.8 65.6 59.8 65.6
2.2 2.6 2767 2.90 661.38 60.2 66.0 60.2 66.0

www.weg.net WG20 Gear Units and Geared Motors 379

 PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
1.2 1.5 5311 0.85 766.52 21.5 36.2 21.5 36.2
1.3 1.5 5131 0.90 742.09 23.2 38.5 23.2 38.5
1.5 1.8 4311 1.05 627.37 29.1 39.5 29.1 39.5
1.6 2.0 3901 1.20 571.21 31.4 40.0 31.4 40.0
1.9 2.4 3271 1.40 482.91 34.1 40.8 34.1 40.8
2.2 2.7 2905 1.55 431.58 35.4 41.3 35.4 41.3 KH094-11P-90S/L-06E 170 478
2.6 3.1 2421 1.90 364.86 36.9 41.9 36.9 41.9
2.7 3.2 2339 1.95 353.21 37.1 42.0 37.1 42.0
3.1 3.8 1945 2.35 298.61 38.0 42.5 38.0 42.5
3.3 4.0 1858 2.45 286.42 38.1 42.6 38.1 42.6
3.9 4.7 1538 2.95 242.14 38.7 43.0 38.7 43.0
1.1 1.4 5714 0.80 1251.99 ** ** ** **
1.2 1.5 5326 0.85 1169.35 21.3 35.8 21.3 35.8
1.4 1.8 4465 1.05 988.58 28.2 39.3 28.2 39.3
1.6 1.9 4079 1.15 906.69 30.4 39.8 30.4 39.8
1.9 2.3 3420 1.35 766.52 33.5 40.7 33.5 40.7
KH094-11P-80-04F 164 478
2.3 2.8 2765 1.65 627.37 35.9 41.5 35.9 41.5
2.5 3.0 2502 1.80 571.21 36.6 41.8 36.6 41.8
K 3.0 3.6 2080 2.20 482.91 37.7 42.4 37.7 42.4
3.3 4.0 1840 2.45 431.58 38.2 42.7 38.2 42.7
3.9 4.8 1520 3.00 364.86 38.7 43.1 38.7 43.1
1.7 2.1 3823 0.80 550.61 ** ** ** **
1.8 2.2 3642 0.85 525.61 11.9 18.4 11.9 7.1
2.0 2.4 3317 0.95 480.77 16.3 27.7 16.3 7.6
2.2 2.7 2956 1.05 430.17 19.7 35.0 19.7 8.1
2.3 2.8 2859 1.05 416.02 20.5 36.8 20.5 8.3
2.6 3.2 2476 1.25 363.25 23.1 41.3 23.1 8.8
2.7 3.3 2372 1.30 348.82 23.7 41.5 23.7 9.0
2.8 3.4 2316 1.30 340.47 24.0 41.6 24.0 9.1
KH084-11P-90S/L-06E 120 474
3.2 3.9 2005 1.50 297.29 25.4 42.0 25.4 9.5
3.4 4.1 1851 1.65 276.09 26.1 42.3 26.1 9.8
3.9 4.7 1600 1.90 241.07 27.0 42.6 27.0 10.1
4.0 4.8 1567 1.95 236.66 27.1 42.7 27.1 10.2
4.1 5.0 1527 2.00 231.12 27.2 42.7 27.2 10.2
4.7 5.7 1317 2.30 201.80 27.8 43.1 27.8 10.6
5.0 6.1 1212 2.50 187.31 28.0 43.2 28.0 10.7
5.7 7.0 1041 2.90 163.55 28.4 43.5 28.4 11.0
1.6 2.0 3988 0.80 873.98 ** ** ** **
1.9 2.3 3468 0.90 763.13 14.5 23.9 14.5 7.4
2.0 2.4 3244 0.95 715.32 17.1 29.4 17.1 7.7
2.1 2.5 3149 1.00 695.67 18.0 31.3 18.0 7.8
2.3 2.8 2816 1.10 624.59 20.8 37.4 20.8 8.3
2.6 3.2 2467 1.25 550.61 23.1 41.4 23.1 8.9
2.7 3.3 2350 1.30 525.61 23.8 41.5 23.8 9.0
3.0 3.6 2136 1.45 480.77 24.8 41.8 24.8 9.3
3.3 4.0 1900 1.60 430.17 25.9 42.2 25.9 9.7 KH084-11P-80-04F 114 474
3.4 4.2 1833 1.65 416.02 26.1 42.3 26.1 9.8
3.9 4.8 1584 1.90 363.25 27.0 42.7 27.0 10.2
4.1 5.0 1515 2.00 348.82 27.2 42.8 27.2 10.3
4.2 5.1 1476 2.05 340.47 27.3 42.8 27.3 10.3
4.8 5.9 1270 2.40 297.29 27.9 43.1 27.9 10.6
4.9 6.0 1245 2.45 292.01 28.0 43.2 28.0 10.7
5.2 6.3 1170 2.60 276.09 28.1 43.3 28.1 10.8
5.9 7.2 1004 3.00 241.07 28.5 43.5 28.5 11.0
4.6 5.6 1571 1.95 206.12 27.1 42.7 27.1 10.2
5.8 7.0 1243 2.45 163.14 28.0 43.2 28.0 10.7 KH083-11P-90S/L-06E 107 472
6.6 8.0 1085 2.80 142.45 28.3 43.4 28.3 10.9
6.9 8.4 1032 2.95 206.12 28.4 43.5 28.4 11.0 KH083-11P-80-04F 101 472

Legend see page 363 ** ... on request

380 WG20 Gear Units and Geared Motors www.weg.net

PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
3.7 4.5 1952 0.80 256.14 ** ** ** **
4.8 5.8 1507 1.05 197.75 15.5 15.9 15.5 4.6
5.7 6.9 1264 1.25 165.85 17.1 16.4 17.1 5.1
7.2 8.8 992 1.60 130.16 18.5 17.0 18.5 5.7
9.4 11 765 2.05 100.45 19.3 17.4 19.3 6.2
KH073-11P-90S/L-06E 66 470
11 14 633 2.45 83.09 19.7 17.7 18.9 6.4
12 15 588 2.65 77.11 19.8 17.8 18.2 6.5
13 16 538 2.90 70.67 19.9 17.9 17.6 6.6
20 24 362 1.70 47.56 20.2 17.9 15.0 6.6
26 31 280 2.75 36.72 20.3 18.1 13.5 6.9
5.6 6.8 1283 1.25 256.14 17.0 16.3 17.0 5.1
7.2 8.8 990 1.60 197.75 18.5 17.0 18.5 5.7
8.6 10 831 1.90 165.85 19.1 17.3 19.1 6.0
KH073-11P-80-04F 60 470
11 13 652 2.40 130.16 19.6 17.7 18.9 6.4
14 17 500 2.60 99.87 20.0 18.0 17.1 6.7
30 37 238 2.60 47.56 20.4 18.3 12.8 7.0
7.7 9.4 928 0.90 121.85 7.0 11.1 7.0 2.4
9.4 11 762 1.10 99.98 9.2 12.9 9.2 2.9
12 14 621 0.95 81.53 10.4 13.3 10.4 3.3 K
15 18 492 1.70 64.62 11.2 13.7 11.2 3.7
16 19 449 1.85 58.89 11.4 13.8 11.4 3.9
19 23 382 2.15 50.17 11.7 14.0 11.7 4.1
21 26 338 0.95 44.35 11.9 13.7 11.9 3.8 KH063-11P-90S/L-06E 46 468
23 28 314 2.65 41.17 12.0 14.3 12.0 4.3
24 29 303 2.65 39.83 12.0 14.3 12.0 4.3
27 33 268 1.70 35.15 12.1 14.1 11.6 4.1
28 34 258 2.95 33.85 12.1 14.4 11.2 4.5
34 42 208 2.45 27.29 12.3 14.3 10.5 4.4
42 51 171 2.95 22.40 12.3 14.5 9.6 4.5
7.2 8.8 992 0.85 198.00 5.9 8.7 5.9 2.2
9.1 11 786 1.05 156.92 8.9 12.8 8.9 2.8
12 14 610 1.35 121.85 10.5 13.3 10.5 3.4
14 17 501 1.65 99.98 11.2 13.7 11.2 3.7
18 21 408 1.40 81.53 11.6 14.0 11.6 4.0 KH063-11P-80-04F 40 468
22 27 324 2.55 64.62 11.9 14.2 11.9 4.3
24 30 295 2.80 58.89 12.0 14.3 12.0 4.4
32 39 222 1.45 44.35 12.2 14.3 10.8 4.3
41 50 176 2.60 35.15 12.3 14.5 9.7 4.5
9.8 12 732 0.85 96.08 3.0 3.8 3.0 3.1
12 14 613 0.95 80.46 5.9 9.9 5.9 3.4
13 16 557 1.10 73.08 6.7 10.3 6.7 3.6
15 18 486 1.25 63.77 7.6 10.5 7.6 3.8
16 19 459 1.35 60.26 7.8 10.6 7.8 3.9
19 23 377 1.60 49.43 8.5 10.9 8.5 4.2
22 27 320 1.90 42.00 8.9 11.0 8.9 4.3
23 28 310 1.95 40.63 8.9 11.1 8.9 4.4 KH053-11P-90S/L-06E 33 466
25 30 292 0.95 38.32 9.0 10.7 9.0 4.0
27 33 263 2.30 34.53 9.2 11.2 9.2 4.5
30 36 240 2.55 31.46 9.3 11.3 9.3 4.6
31 38 231 1.70 30.37 9.3 11.0 9.3 4.3
34 42 209 2.80 27.39 9.4 11.4 9.4 4.7
40 49 180 2.30 23.58 9.5 11.2 9.5 4.5
49 59 147 2.85 19.35 9.6 11.3 9.6 4.6
9.5 12 757 0.80 151.20 ** ** ** **
12 14 621 1.00 124.06 5.7 9.5 5.7 3.4
15 18 481 1.25 96.08 7.6 10.5 7.6 3.8
18 22 403 1.40 80.46 8.3 10.8 8.3 4.1
20 24 366 1.65 73.08 8.6 10.9 8.6 4.2
22 27 319 1.90 63.77 8.9 11.0 8.9 4.3
KH053-11P-80-04F 26 466
24 29 302 2.00 60.26 9.0 11.1 9.0 4.4
29 35 248 2.45 49.43 9.2 11.3 9.2 4.6
34 41 210 2.90 42.00 9.4 11.4 9.4 4.7
35 43 204 2.95 40.63 9.4 11.4 9.4 4.7
37 45 192 1.40 38.32 9.4 11.1 9.4 4.4
47 57 152 2.60 30.37 9.6 11.3 9.6 4.6

www.weg.net WG20 Gear Units and Geared Motors 381

 PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
14 17 504 0.80 66.20 ** ** ** **
16 20 439 0.95 57.58 2.7 3.6 2.7 2.1
17 21 413 1.00 54.18 3.5 5.3 3.5 2.2
21 26 340 1.20 44.64 4.9 8.1 4.9 2.5
24 30 293 0.95 38.49 5.5 8.0 5.5 2.4
26 31 280 1.40 36.78 5.7 8.4 5.7 2.8
31 38 232 1.40 30.39 6.1 8.3 6.1 2.7 KH043-11P-90S/L-06E 29 464
32 38 227 1.60 29.81 6.2 8.6 6.2 3.0
33 41 214 1.90 28.13 6.3 8.6 6.3 3.0
40 49 180 1.75 23.57 6.5 8.6 6.5 3.0
44 54 162 2.50 21.25 6.6 8.9 6.6 3.3
49 59 147 2.05 19.29 6.7 8.7 6.7 3.1
63 77 113 2.50 14.85 6.8 8.9 6.8 3.3
16 20 447 0.85 89.17 2.4 3.0 2.4 2.1
20 24 365 1.10 72.92 4.5 7.5 4.5 2.4
22 26 332 1.25 66.20 5.0 8.2 5.0 2.6
25 30 288 1.40 57.58 5.6 8.3 5.6 2.7
26 32 271 1.50 54.18 5.8 8.4 5.8 2.8
K 30 37 236 0.85 47.07 6.1 8.3 6.1 2.7
32 39 224 1.80 44.64 6.2 8.6 6.2 3.0
33 40 220 1.85 43.93 6.2 8.6 6.2 3.0 KH043-11P-80-04F 23 464
37 45 193 1.45 38.49 6.4 8.5 6.4 2.9
39 47 184 2.10 36.78 6.5 8.8 6.5 3.2
39 48 183 2.20 36.54 6.5 8.8 6.5 3.2
47 57 152 2.15 30.39 6.7 8.7 6.7 3.1
48 58 149 2.45 29.81 6.7 8.9 6.7 3.3
51 62 141 2.85 28.13 6.7 8.9 6.7 3.3
61 74 118 2.65 23.57 6.8 8.9 6.8 3.3
31 38 231 0.90 30.29 3.1 2.3 3.1 2.3
33 40 218 0.95 28.67 3.4 2.4 3.4 2.4
39 47 186 0.90 24.38 4.0 2.3 4.0 2.3
43 53 165 1.25 21.67 4.2 2.7 4.2 2.7
49 59 148 1.15 19.37 4.4 2.6 4.4 2.6
57 70 125 1.60 16.47 4.6 2.9 4.6 2.9
KH033-11P-90S/L-06E 26 462
63 77 114 1.45 14.96 4.7 2.8 4.7 2.8
73 89 98 2.05 12.81 4.8 3.1 4.8 3.1
79 96 91 1.80 11.94 4.9 3.0 4.9 3.0
94 115 76 2.65 10.00 5.0 3.2 5.0 3.2
104 127 69 2.40 9.03 5.0 3.2 5.0 3.2
137 167 52 2.90 6.86 5.1 3.3 5.1 3.3
29 35 250 0.85 49.88 2.6 2.2 2.6 2.2
31 37 233 0.90 46.48 3.1 2.3 3.1 2.3
37 45 194 1.05 38.80 3.8 2.6 3.8 2.6
40 48 180 1.15 35.90 4.0 2.6 4.0 2.6
47 57 152 1.35 30.29 4.4 2.8 4.4 2.8
48 58 150 0.90 29.97 4.4 2.6 4.4 2.6
50 61 144 1.40 28.67 4.5 2.8 4.5 2.8 KH033-11P-80-04F 19 462
59 71 122 1.35 24.38 4.7 2.8 4.7 2.8
66 80 109 1.85 21.67 4.8 3.0 4.8 3.0
74 90 97 1.70 19.37 4.9 3.0 4.9 3.0
87 106 82 2.45 16.47 4.9 3.2 4.9 3.2
96 116 75 2.20 14.96 5.0 3.1 5.0 3.1
120 146 60 2.75 11.94 5.0 3.2 5.0 3.2

Legend see page 363 ** ... on request

382 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
61 74 117 0.80 15.41 ** ** ** **
68 83 105 0.90 13.81 5.0 2.8 5.0 2.8
71 86 101 0.90 13.29 5.0 2.8 5.0 2.8
79 96 91 1.00 11.92 5.1 2.8 5.1 2.8
81 99 88 1.00 11.60 5.1 2.8 5.1 2.8
90 110 79 1.10 10.40 5.1 2.8 5.1 2.8
102 124 70 1.15 9.25 5.2 2.8 5.2 2.8 KH022-11P-90S/L-06E 24 460
110 135 65 1.20 8.51 5.2 2.8 5.2 2.8
123 150 58 1.35 7.63 5.2 2.8 5.2 2.8
136 166 53 1.45 6.91 5.0 2.8 5.0 2.8
158 192 45 1.55 5.96 4.8 2.8 4.8 2.8
181 220 40 1.65 5.20 4.5 2.8 4.5 2.8
246 300 29 2.00 3.82 4.1 2.8 4.1 2.8
54 66 132 0.85 26.41 4.8 2.8 4.8 2.8
60 73 119 0.95 23.68 4.9 2.8 4.9 2.8
69 84 103 1.00 20.63 5.0 2.8 5.0 2.8
73 89 98 0.85 19.50 5.0 2.8 5.0 2.8
77 94 93 1.15 18.50 5.0 2.8 5.0 2.8
93 113 77 1.25 15.41 5.1 2.8 5.1 2.8 K
104 126 69 1.35 13.81 5.2 2.8 5.2 2.8
108 131 67 1.35 13.29 5.2 2.8 5.2 2.8
120 146 60 1.50 11.92 5.2 2.8 5.2 2.8
121 147 59 1.40 11.84 5.2 2.8 5.2 2.8 KH022-11P-80-04F 17 460
123 150 58 1.50 11.60 5.2 2.8 5.2 2.8
138 167 52 1.65 10.40 5.0 2.8 5.0 2.8
155 188 46 1.75 9.25 4.8 2.8 4.8 2.8
168 204 43 1.85 8.51 4.6 2.8 4.6 2.8
187 228 38 2.05 7.63 4.5 2.8 4.5 2.8
207 252 35 2.15 6.91 4.3 2.8 4.3 2.8
240 292 30 2.35 5.96 4.1 2.8 4.1 2.8
275 335 26 2.50 5.20 3.9 2.8 3.9 2.8
374 455 19 3.00 3.82 3.5 2.8 3.5 2.8

Legend see page 363 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 383

 PN = 1.1 kW IE3
50 Hz 60 Hz at 50 Hz

1.1 kW 1.3 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.44 0.53 21397 0.85 3337.74 61.0 105.7 61.0 105.7
0.48 0.58 19471 0.95 3052.96 71.6 115.1 71.6 115.1
0.53 0.64 17333 1.05 2731.65 80.8 116.8 80.8 116.8
0.63 0.76 14487 1.25 2306.68 90.2 118.9 90.2 118.9
0.66 0.79 13876 1.30 2215.09 91.9 119.4 91.9 119.4
KH155-11P-90S/L-04E 687 492
0.77 0.93 11674 1.55 1887.82 97.2 121.1 97.2 121.1
0.78 0.95 11438 1.60 1854.30 97.7 121.3 97.7 121.3
0.95 1.1 9273 1.95 1530.83 101.8 122.9 101.8 122.9
0.97 1.2 9080 2.00 1502.83 102.1 123.1 102.1 123.1
1.1 1.4 7583 2.40 1281.49 104.2 124.2 104.2 124.2
0.42 0.51 22412 0.85 2306.68 54.1 91.1 54.1 91.1
0.43 0.53 21522 0.85 2215.09 60.2 104.0 60.2 104.0
0.51 0.62 18202 1.00 1887.82 77.3 116.1 77.3 116.1
0.52 0.63 17833 1.05 1854.30 78.8 116.4 78.8 116.4
KH155-11P-100L-06D 693 492
0.63 0.76 14571 1.25 1530.83 90.0 118.9 90.0 118.9
0.64 0.78 14268 1.30 1502.83 90.9 119.1 90.9 119.1
0.75 0.91 12042 1.50 1281.49 96.4 120.8 96.4 120.8
0.92 1.1 9560 1.90 1038.59 101.3 122.7 101.3 122.7
K 1.1 1.3 8111 2.25 1308.92 103.5 123.8 103.5 123.8
1.3 1.6 6870 2.65 1127.36 105.1 124.8 105.1 124.8 KH154-11P-90S/L-04E 674 490
1.4 1.7 6248 2.90 1035.99 105.8 125.2 105.8 125.2
0.73 0.89 12706 1.45 1308.92 94.9 120.3 94.9 120.3
0.85 1.0 10832 1.70 1127.36 99.0 121.7 99.0 121.7
0.93 1.1 9892 1.85 1035.99 100.7 122.5 100.7 122.5
0.98 1.2 9272 1.95 975.12 101.8 122.9 101.8 122.9 KH154-11P-100L-06D 680 490
1.1 1.3 8531 2.15 904.58 102.9 123.5 102.9 123.5
1.2 1.5 7446 2.45 799.45 104.4 124.3 104.4 124.3
1.4 1.7 6294 2.90 688.57 105.7 125.2 105.7 125.2
0.92 1.1 10181 1.30 1579.81 78.3 87.3 78.3 87.3
1.1 1.3 8804 1.50 1377.44 81.2 88.7 81.2 88.7
1.2 1.4 7732 1.70 1219.69 83.1 89.8 83.1 89.8
1.4 1.7 6672 1.95 1063.46 84.8 90.8 84.8 90.8 KH124-11P-90S/L-04E 420 486
1.6 1.9 5664 2.30 916.04 86.1 91.8 86.1 91.8
1.8 2.2 4882 2.70 802.79 86.9 92.6 86.9 92.6
1.9 2.3 4652 2.80 768.25 87.1 92.8 87.1 92.8
0.61 0.74 15719 0.85 1579.81 59.8 81.7 59.8 81.7
0.70 0.85 13621 1.00 1377.44 68.3 83.8 68.3 83.8
0.79 0.96 12012 1.10 1219.69 73.5 85.5 73.5 85.5
0.81 0.98 11661 1.15 1186.50 74.5 85.8 74.5 85.8
0.90 1.1 10409 1.25 1063.46 77.8 87.1 77.8 87.1
0.94 1.1 9971 1.35 1022.92 78.8 87.5 78.8 87.5
1.0 1.3 8874 1.50 916.04 81.1 88.6 81.1 88.6
KH124-11P-100L-06D 426 486
1.1 1.3 8622 1.55 891.88 81.6 88.9 81.6 88.9
1.2 1.5 7713 1.70 802.79 83.2 89.8 83.2 89.8
1.4 1.7 6642 2.00 699.95 84.8 90.8 84.8 90.8
1.5 1.8 6252 2.10 661.56 85.3 91.2 85.3 91.2
1.6 1.9 5639 2.35 602.92 86.1 91.8 86.1 91.8
1.8 2.2 4989 2.65 540.20 86.8 92.5 86.8 92.5
1.9 2.3 4704 2.80 512.47 87.1 92.8 87.1 92.8
1.1 1.4 8509 0.95 1301.54 43.2 59.4 43.2 59.4
1.3 1.6 7341 1.10 1129.81 48.7 60.8 48.7 60.8
1.4 1.8 6489 1.25 1004.85 51.9 61.8 51.9 61.8
1.5 1.8 6291 1.30 976.16 52.5 62.0 52.5 62.0
1.7 2.0 5587 1.45 872.27 54.7 62.8 54.7 62.8
1.9 2.3 4777 1.70 753.64 56.7 63.7 56.7 63.7 KH104-11P-90S/L-04E 297 482
2.0 2.4 4628 1.75 731.54 57.0 63.9 57.0 63.9
2.2 2.7 4149 1.95 661.38 58.0 64.4 58.0 64.4
2.3 2.8 3949 2.05 632.05 58.4 64.7 58.4 64.7
2.5 3.1 3557 2.25 574.12 59.1 65.1 59.1 65.1
2.9 3.4 3117 2.60 510.43 59.8 65.6 59.8 65.6

Legend see page 363

384 WG20 Gear Units and Geared Motors www.weg.net

PN = 1.1 kW IE3
50 Hz 60 Hz at 50 Hz

1.1 kW 1.3 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.96 1.2 10019 0.80 1004.85 ** ** ** **
0.98 1.2 9713 0.85 976.16 35.6 58.1 35.6 58.1
1.1 1.3 8643 0.95 872.27 42.5 59.3 42.5 59.3
1.3 1.5 7422 1.10 753.64 48.3 60.7 48.3 60.7
1.5 1.8 6473 1.25 661.38 51.9 61.8 51.9 61.8
1.7 2.0 5573 1.45 574.12 54.7 62.8 54.7 62.8
1.9 2.3 4914 1.65 510.43 56.4 63.6 56.4 63.6
KH104-11P-100L-06D 303 482
2.2 2.6 4222 1.90 443.08 57.9 64.3 57.9 64.3
2.3 2.8 4006 2.00 422.20 58.3 64.6 58.3 64.6
2.5 3.0 3595 2.25 382.82 59.0 65.1 59.0 65.1
2.6 3.2 3428 2.35 366.49 59.3 65.3 59.3 65.3
2.7 3.2 3352 2.40 359.12 59.4 65.3 59.4 65.3
3.0 3.7 2912 2.75 316.65 60.0 65.8 60.0 65.8
3.1 3.7 2861 2.80 311.74 60.1 65.9 60.1 65.9
1.6 1.9 5964 0.80 906.69 ** ** ** **
1.9 2.3 5022 0.90 766.52 24.1 38.6 24.1 38.6
2.0 2.4 4852 0.95 742.09 25.5 38.8 25.5 38.8
2.3 2.8 4068 1.15 627.37 30.5 39.8 30.5 39.8
2.5 3.1 3689 1.25 571.21 32.4 40.3 32.4 40.3 K
3.0 3.6 3087 1.50 482.91 34.8 41.1 34.8 41.1 KH124-11P-90S/L-04E 168 486
3.4 4.1 2742 1.65 431.58 35.9 41.5 35.9 41.5
4.0 4.8 2284 2.00 364.86 37.2 42.1 37.2 42.1
4.1 5.0 2207 2.05 353.21 37.4 42.2 37.4 42.2
4.9 5.9 1831 2.50 298.61 38.2 42.7 38.2 42.7
5.1 6.1 1749 2.60 286.42 38.4 42.8 38.4 42.8
1.7 2.0 5695 0.80 571.21 ** ** ** **
2.0 2.4 4785 0.95 482.91 26.0 38.9 26.0 38.9
2.2 2.7 4250 1.10 431.58 29.5 39.6 29.5 39.6
2.6 3.2 3564 1.30 364.86 32.9 40.5 32.9 40.5
2.7 3.3 3443 1.35 353.21 33.4 40.6 33.4 40.6
KH094-11P-100L-06D 174 478
3.2 3.9 2881 1.60 298.61 35.5 41.3 35.5 41.3
3.4 4.1 2758 1.65 286.42 35.9 41.5 35.9 41.5
4.0 4.8 2298 2.00 242.14 37.2 42.1 37.2 42.1
4.7 5.7 1892 2.40 202.70 38.1 42.6 38.1 42.6
4.9 6.0 1806 2.50 194.32 38.2 42.7 38.2 42.7
5.7 6.9 1852 2.45 169.25 38.2 42.6 38.2 42.6
KH093-11P-100L-06D 161 476
6.7 8.1 1566 2.90 143.08 38.7 43.0 38.7 43.0
2.6 3.2 3615 0.85 550.61 12.4 19.5 12.4 7.2
2.8 3.3 3443 0.90 525.61 14.8 24.5 14.8 7.4
3.0 3.7 3137 1.00 480.77 18.1 31.6 18.1 7.9
3.4 4.1 2795 1.10 430.17 21.0 37.9 21.0 8.4
3.5 4.2 2698 1.15 416.02 21.7 39.4 21.7 8.5
4.0 4.8 2341 1.30 363.25 23.8 41.5 23.8 9.0
4.2 5.0 2243 1.35 348.82 24.3 41.7 24.3 9.2
4.3 5.2 2185 1.40 340.47 24.6 41.8 24.6 9.3
KH084-11P-90S/L-04E 118 474
4.9 5.9 1892 1.60 297.29 25.9 42.2 25.9 9.7
5.0 6.0 1855 1.65 292.01 26.1 42.3 26.1 9.8
5.3 6.4 1747 1.75 276.09 26.5 42.4 26.5 9.9
6.0 7.3 1509 2.00 241.07 27.2 42.8 27.2 10.3
6.1 7.4 1479 2.05 236.66 27.3 42.8 27.3 10.3
6.3 7.6 1441 2.10 231.12 27.4 42.9 27.4 10.4
7.2 8.7 1240 2.45 201.80 28.0 43.2 28.0 10.7
7.8 9.4 1141 2.65 187.31 28.2 43.3 28.2 10.8
2.6 3.2 3614 0.85 363.25 12.4 19.5 12.4 7.2
2.8 3.3 3464 0.90 348.82 14.5 23.9 14.5 7.4
3.2 3.9 2934 1.05 297.29 19.9 35.5 19.9 8.2
3.3 4.0 2882 1.05 292.01 20.3 36.3 20.3 8.2
3.5 4.2 2713 1.15 276.09 21.6 39.2 21.6 8.5
4.0 4.8 2355 1.30 241.07 23.7 41.5 23.7 9.0 KH093-11P-100L-06D 124 476
4.1 4.9 2312 1.30 236.66 24.0 41.6 24.0 9.1
4.2 5.0 2253 1.35 231.12 24.3 41.7 24.3 9.2
4.8 5.8 1951 1.55 201.80 25.7 42.1 25.7 9.6
5.1 6.2 1800 1.70 187.31 26.3 42.3 26.3 9.8
5.9 7.1 1555 1.95 163.55 27.1 42.7 27.1 10.2

www.weg.net WG20 Gear Units and Geared Motors 385

 PN = 1.1 kW IE3
50 Hz 60 Hz at 50 Hz

1.1 kW 1.3 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
7.1 8.5 1488 2.05 206.12 27.3 42.8 27.3 10.3
8.9 11 1178 2.55 163.14 28.1 43.3 28.1 10.8 KH083-11P-90S/L-04E 105 472
10 12 1028 2.95 142.45 28.4 43.5 27.9 11.0
4.7 5.7 2256 1.35 206.12 24.3 41.7 24.3 9.2
5.9 7.1 1785 1.70 163.14 26.3 42.4 26.3 9.9
6.7 8.2 1559 1.95 142.45 27.1 42.7 27.1 10.2
KH083-11P-100L-06D 111 472
7.6 9.3 1378 2.20 125.90 27.6 43.0 27.6 10.5
9.0 11 1165 2.60 106.46 28.2 43.3 28.2 10.8
10 13 1001 3.00 91.51 28.5 43.5 27.8 11.0
5.7 6.9 1849 0.85 256.14 12.3 15.2 12.3 3.9
7.4 8.9 1428 1.10 197.75 16.1 16.0 16.1 4.8
8.8 11 1197 1.30 165.85 17.5 16.5 17.5 5.3
11 14 940 1.65 130.16 18.7 17.1 18.7 5.8
14 18 725 2.15 100.45 19.4 17.5 18.0 6.3
KH073-11P-90S/L-04E 64 470
15 18 721 1.80 99.87 19.4 17.5 17.6 6.3
18 21 600 2.60 83.09 19.8 17.8 16.3 6.5
19 23 557 2.80 77.11 19.9 17.8 15.8 6.6
31 37 343 1.80 47.56 20.2 17.9 13.1 6.7
K 40 48 265 2.90 36.72 20.3 18.2 11.8 6.9
5.8 7 1815 0.90 165.85 12.6 15.2 12.6 4.0
7.4 9 1424 1.10 130.16 16.1 16.1 16.1 4.8
9.6 12 1099 1.45 100.45 18.0 16.7 18.0 5.5
12 14 909 1.75 83.09 18.8 17.1 18.8 5.9
14 16 773 2.05 70.67 19.3 17.4 18.2 6.2
15 18 708 2.20 64.67 19.5 17.5 17.6 6.3 KH073-11P-100L-06D 70 470
16 19 670 2.35 61.25 19.6 17.6 17.1 6.4
19 23 566 2.75 51.72 19.8 17.8 15.9 6.6
20 24 520 1.20 47.56 19.9 17.4 15.8 6.1
26 32 402 1.90 36.72 20.2 17.7 14.1 6.5
31 38 337 2.75 30.79 20.3 17.9 13.1 6.7
12 14 880 0.95 121.85 7.8 12.5 7.8 2.5
15 18 722 1.15 99.98 9.6 13.0 9.6 3.0
18 22 589 1.00 81.53 10.6 13.4 10.6 3.4
19 23 559 1.50 77.42 10.8 13.5 10.8 3.5
23 27 467 1.80 64.62 11.4 13.8 11.4 3.8
25 30 425 1.95 58.89 11.5 13.9 11.5 4.0
29 35 362 2.30 50.17 11.8 14.1 11.7 4.2 KH063-11P-90S/L-04E 44 468
30 36 351 2.35 48.56 11.9 14.1 11.5 4.2
33 40 320 1.00 44.35 12.0 13.8 11.3 3.9
35 43 297 2.80 41.17 12.0 14.3 10.8 4.4
37 44 288 2.80 39.83 12.1 14.3 10.5 4.4
41 50 254 1.80 35.15 12.2 14.1 10.2 4.2
53 64 197 2.55 27.29 12.3 14.4 9.2 4.4
12 15 847 1.00 77.42 8.2 12.6 8.2 2.6
15 18 707 1.20 64.62 9.7 13.0 9.7 3.1
16 20 644 1.30 58.89 10.2 13.2 10.2 3.3
19 23 549 1.50 50.17 10.9 13.5 10.9 3.6
20 24 531 1.55 48.56 11.0 13.6 11.0 3.6
23 28 451 1.85 41.17 11.4 13.8 11.4 3.9
24 29 436 1.85 39.83 11.5 13.9 11.5 3.9
27 33 385 1.20 35.15 11.7 13.5 11.7 3.6 KH063-11P-100L-06D 50 468
28 34 370 2.05 33.85 11.8 14.1 11.8 4.1
30 37 349 2.40 31.88 11.9 14.2 11.5 4.2
34 42 305 2.35 27.83 12.0 14.3 10.9 4.3
35 43 299 1.70 27.29 12.0 13.9 11.0 4.0
40 48 265 2.95 24.25 12.1 14.4 10.2 4.5
43 52 245 2.05 22.40 12.2 14.2 10.0 4.2
55 67 190 2.65 17.34 12.3 14.4 9.0 4.5

Legend see page 363

386 WG20 Gear Units and Geared Motors www.weg.net

 PN = 1.1 kW IE3
50 Hz 60 Hz at 50 Hz

1.1 kW 1.3 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
15 18 694 0.90 96.08 4.2 6.3 4.2 3.2
18 22 581 1.00 80.46 6.4 10.2 6.4 3.5
20 24 528 1.15 73.08 7.1 10.4 7.1 3.7
23 28 460 1.35 63.77 7.8 10.6 7.8 3.9
24 29 435 1.40 60.26 8.0 10.7 8.0 4.0
29 36 358 1.70 49.52 8.6 10.9 8.6 4.2
35 42 303 2.00 42.00 9.0 11.1 9.0 4.4
36 43 293 2.05 40.63 9.0 11.1 9.0 4.4 KH053-11P-90S/L-04E 31 466
38 46 277 1.00 38.32 9.1 10.8 9.1 4.1
42 51 249 2.45 34.53 9.2 11.2 9.2 4.5
46 56 227 2.65 31.46 9.3 11.3 9.3 4.6
48 58 219 1.80 30.37 9.3 11.0 9.3 4.3
53 64 198 2.95 27.39 9.4 11.4 9.4 4.7
62 75 170 2.45 23.58 9.5 11.2 9.5 4.5
75 91 140 3.00 19.35 9.6 11.4 9.6 4.7
13 16 800 0.80 73.08 ** ** ** **
15 18 698 0.90 63.77 4.1 6.1 4.1 3.2
16 19 659 0.95 60.26 5.0 8.0 5.0 3.3
19 24 542 1.15 49.52 6.9 10.4 6.9 3.7 K
23 28 460 1.35 42.00 7.8 10.6 7.8 3.9
24 29 445 1.35 40.63 8.0 10.7 8.0 4.0
28 34 378 1.60 34.53 8.5 10.9 8.5 4.2
31 37 344 1.75 31.46 8.7 11.0 8.7 4.3 KH053-11P-100L-06D 36 466
32 38 332 1.20 30.37 8.8 10.5 8.8 3.8
35 43 300 1.95 27.39 9.0 11.1 9.0 4.4
40 49 262 2.30 23.93 9.2 11.2 9.2 4.5
41 49 258 1.65 23.58 9.2 10.8 9.2 4.1
49 59 216 2.80 19.73 9.4 11.3 9.4 4.6
50 60 212 2.00 19.35 9.4 11.1 9.4 4.4
64 78 164 2.55 14.98 9.5 11.3 9.5 4.6
20 24 526 0.80 72.92 ** ** ** **
22 27 478 0.85 66.20 ** ** ** **
25 31 416 1.00 57.58 3.4 5.1 3.4 2.2
27 32 391 1.05 54.18 4.0 6.4 4.0 2.3
33 39 322 1.25 44.64 5.2 8.2 5.2 2.6
38 46 278 1.00 38.49 5.7 8.1 5.7 2.5
40 48 266 1.45 36.78 5.8 8.4 5.8 2.8
KH043-11P-90S/L-04E 27 464
48 58 219 1.50 30.39 6.2 8.4 6.2 2.8
49 59 215 1.70 29.81 6.3 8.6 6.3 3.0
52 63 203 2.00 28.13 6.4 8.7 6.4 3.1
62 75 170 1.85 23.57 6.6 8.6 6.6 3.0
68 83 153 2.65 21.25 6.7 8.9 6.7 3.3
75 91 139 2.15 19.29 6.7 8.8 6.7 3.2
98 119 107 2.60 14.85 6.9 8.9 6.9 3.3
22 26 488 0.85 44.64 ** ** ** **
26 32 402 1.00 36.78 3.8 6.0 3.8 2.3
32 38 333 1.00 30.39 5.0 7.8 5.0 2.2
34 41 308 1.30 28.13 5.4 8.3 5.4 2.7
41 49 258 1.20 23.57 5.9 8.2 5.9 2.6
45 55 233 1.75 21.25 6.1 8.6 6.1 3.0
50 60 211 1.40 19.29 6.3 8.4 6.3 2.8 KH043-11P-100L-06D 33 464
55 67 190 2.15 17.39 6.4 8.7 6.4 3.1
65 78 162 1.75 14.85 6.6 8.7 6.6 3.1
68 83 154 2.60 14.10 6.7 8.9 6.7 3.3
86 104 123 2.15 11.22 6.8 8.9 6.8 3.3
105 127 100 2.50 9.18 6.9 9.0 6.9 3.4
129 157 81 2.95 7.44 6.9 9.1 6.4 3.5

Legend see page 363 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 387

 PN = 1.1 kW IE3
50 Hz 60 Hz at 50 Hz

1.1 kW 1.3 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
41 49 259 0.80 35.90 ** ** ** **
48 58 219 0.95 30.29 3.4 2.4 3.4 2.4
51 61 207 1.00 28.67 3.6 2.5 3.6 2.5
60 72 176 0.95 24.38 4.1 2.4 4.1 2.4
67 81 156 1.30 21.67 4.3 2.8 4.3 2.8
75 91 140 1.20 19.37 4.5 2.6 4.5 2.6
KH033-11P-90S/L-04E 24 462
88 107 119 1.70 16.47 4.7 3.0 4.7 3.0
97 118 108 1.55 14.96 4.8 2.9 4.8 2.9
114 137 92 2.20 12.81 4.9 3.1 4.9 3.1
122 147 86 1.90 11.94 4.9 3.0 4.9 3.0
146 176 72 2.80 10.00 5.0 3.2 5.0 3.2
161 195 65 2.55 9.03 5.0 3.2 5.0 3.2
44 54 237 0.85 21.67 3.0 2.3 3.0 2.3
50 60 212 0.80 19.37 ** ** ** **
58 71 180 1.15 16.47 4.0 2.6 4.0 2.6
64 78 164 1.00 14.96 4.3 2.5 4.3 2.5
75 91 140 1.45 12.81 4.5 2.9 4.5 2.9
80 98 131 1.25 11.94 4.6 2.7 4.6 2.7 KH033-11P-100L-06D 29 462
K 96 117 109 1.85 10.00 4.8 3.0 4.8 3.0
106 129 99 1.65 9.03 4.8 2.9 4.8 2.9
140 170 75 2.00 6.86 5.0 3.1 5.0 3.1
180 218 58 2.35 5.34 5.0 3.2 5.0 3.2
230 279 46 2.80 4.17 5.1 3.3 5.1 3.3
79 95 134 0.80 18.50 ** ** ** **
94 114 111 0.85 15.41 4.9 2.8 4.9 2.8
105 127 100 0.95 13.81 5.0 2.8 5.0 2.8
109 132 96 0.95 13.29 5.0 2.8 5.0 2.8
122 148 86 1.05 11.92 5.1 2.8 5.1 2.8
123 149 85 0.95 11.84 5.1 2.8 5.1 2.8
125 152 84 1.05 11.60 5.1 2.8 5.1 2.8
140 169 75 1.15 10.40 5.1 2.8 5.1 2.8 KH022-11P-90S/L-04E 22 460
157 190 67 1.25 9.25 4.9 2.8 4.9 2.8
171 207 61 1.30 8.51 4.7 2.8 4.7 2.8
191 231 55 1.40 7.63 4.5 2.8 4.5 2.8
211 255 50 1.50 6.91 4.4 2.8 4.4 2.8
244 295 43 1.65 5.96 4.1 2.8 4.1 2.8
280 338 38 1.75 5.20 3.9 2.8 3.9 2.8
381 461 28 2.10 3.82 3.5 2.8 3.5 2.8

Legend see page 363 ** ... on request

388 WG20 Gear Units and Geared Motors www.weg.net

 PN = 1.5 kW IE3
50 Hz 60 Hz at 50 Hz

1.5 kW 1.8 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.63 0.76 20182 0.90 2306.68 68.0 114.6 68.0 114.6
0.65 0.79 19331 0.95 2215.09 72.3 115.2 72.3 115.2
0.77 0.93 16307 1.15 1887.82 84.5 117.6 84.5 117.6
0.78 0.95 16017 1.15 1854.30 85.5 117.8 85.5 117.8
KH155-11P-90S/L-04F 688 492
0.95 1.1 13054 1.40 1530.83 94.1 120.0 94.1 120.0
0.96 1.2 12782 1.45 1502.83 94.7 120.2 94.7 120.2
1.1 1.4 10760 1.70 1281.49 99.1 121.8 99.1 121.8
1.4 1.7 8520 2.15 1038.59 102.9 123.5 102.9 123.5
1.1 1.3 11401 1.60 1308.92 97.8 121.3 97.8 121.3
1.3 1.6 9698 1.90 1127.36 101.0 122.6 101.0 122.6
1.4 1.7 8857 2.05 1035.99 102.4 123.2 102.4 123.2
1.5 1.8 8285 2.20 975.12 103.3 123.7 103.3 123.7 KH154-11P-90S/L-04F 675 490
1.6 1.9 7622 2.40 904.58 104.2 124.2 104.2 124.2
1.8 2.2 6639 2.75 799.45 105.4 124.9 105.4 124.9
1.9 2.3 6456 2.80 779.11 105.6 125.1 105.6 125.1
0.92 1.1 14133 0.95 1579.81 66.5 83.3 66.5 83.3
1.1 1.3 12247 1.10 1377.44 72.8 85.2 72.8 85.2
1.2 1.5 10485 1.25 1186.50 77.6 87.0 77.6 87.0
1.4 1.7 9340 1.40 1063.46 80.1 88.1 80.1 88.1 K
1.6 1.9 7962 1.65 916.04 82.7 89.5 82.7 89.5
1.8 2.2 6906 1.90 802.79 84.4 90.6 84.4 90.6
KH124-11P-90S/L-04F 421 486
1.9 2.3 6582 2.00 768.25 84.9 90.9 84.9 90.9
2.1 2.5 5947 2.20 699.95 85.7 91.5 85.7 91.5
2.2 2.7 5586 2.35 661.56 86.1 91.9 86.1 91.9
2.3 2.8 5188 2.55 619.56 86.6 92.3 86.6 92.3
2.4 2.9 5038 2.60 602.92 86.7 92.5 86.7 92.5
2.7 3.2 4448 2.95 540.20 87.3 93.0 87.3 93.0
1.3 1.6 10170 0.80 1129.81 ** ** ** **
1.4 1.7 9008 0.90 1004.85 40.3 58.9 40.3 58.9
1.5 1.8 8733 0.95 976.16 42.0 59.2 42.0 59.2
1.7 2.0 7772 1.05 872.27 46.8 60.3 46.8 60.3
1.9 2.3 6673 1.20 753.64 51.2 61.5 51.2 61.5
2.0 2.4 6464 1.25 731.54 52.0 61.8 52.0 61.8
2.2 2.7 5808 1.40 661.38 54.0 62.5 54.0 62.5
2.3 2.8 5539 1.45 632.05 54.8 62.8 54.8 62.8 KH104-11P-90S/L-04F 298 482
2.5 3.1 5001 1.60 574.12 56.2 63.5 56.2 63.5
2.8 3.4 4400 1.85 510.43 57.5 64.1 57.5 64.1
2.9 3.5 4267 1.90 496.04 57.8 64.3 57.8 64.3
3.3 4.0 3772 2.15 443.08 58.7 64.9 58.7 64.9
3.4 4.2 3580 2.25 422.20 59.1 65.1 59.1 65.1
3.8 4.6 3212 2.50 382.82 59.6 65.5 59.6 65.5
4.0 4.8 3056 2.65 366.49 59.8 65.7 59.8 65.7
2.3 2.8 5647 0.80 627.37 ** ** ** **
2.5 3.1 5121 0.90 571.21 23.3 38.5 23.3 38.5
3.0 3.6 4302 1.05 482.91 29.2 39.5 29.2 39.5
3.4 4.1 3822 1.20 431.58 31.7 40.1 31.7 40.1
4.0 4.8 3198 1.45 364.86 34.4 40.9 34.4 40.9
4.1 5.0 3089 1.50 353.21 34.8 41.1 34.8 41.1 KH094-11P-90S/L-04F 169 478
4.9 5.9 2585 1.75 298.61 36.4 41.7 36.4 41.7
5.1 6.1 2469 1.85 286.42 36.7 41.9 36.7 41.9
6.0 7.2 2057 2.20 242.14 37.7 42.4 37.7 42.4
7.2 8.7 1687 2.70 202.70 38.5 42.9 38.5 42.9
7.5 9.0 1610 2.80 194.32 38.6 43.0 38.6 43.0
8.6 10 1672 2.70 169.25 38.5 42.9 38.5 42.9 KH093-11P-90S/L-04F 156 476

Legend see page 363 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 389

 PN = 1.5 kW IE3
50 Hz 60 Hz at 50 Hz

1.5 kW 1.8 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
3.4 4.1 3872 0.80 430.17 ** ** ** **
3.5 4.2 3737 0.85 416.02 10.2 14.9 10.2 7.0
4.0 4.8 3250 0.95 363.25 17.0 29.2 17.0 7.7
4.2 5.0 3114 1.00 348.82 18.4 32.2 18.4 7.9
4.3 5.2 3040 1.00 340.47 19.0 33.5 19.0 8.0
4.9 5.9 2638 1.15 297.29 22.1 40.3 22.1 8.6
5.0 6.0 2586 1.20 292.01 22.4 41.0 22.4 8.7
KH084-11P-90S/L-04F 119 474
5.3 6.4 2440 1.25 276.09 23.3 41.4 23.3 8.9
6.0 7.3 2113 1.45 241.07 25.0 41.9 25.0 9.4
6.1 7.4 2074 1.45 236.66 25.1 41.9 25.1 9.4
6.3 7.6 2021 1.50 231.12 25.4 42.0 25.4 9.5
7.2 8.7 1747 1.75 201.80 26.5 42.4 26.5 9.9
7.7 9.4 1611 1.90 187.31 26.9 42.6 26.9 10.1
8.9 11 1390 2.20 163.55 27.6 42.9 27.6 10.4
7.0 8.5 2036 1.50 206.12 25.3 42.0 25.3 9.5
8.9 11 1612 1.90 163.14 26.9 42.6 26.9 10.1
10 12 1407 2.15 142.45 27.5 42.9 27.5 10.4 KH083-11P-90S/L-04F 106 472
12 14 1244 2.45 125.90 28.0 43.2 27.2 10.7
K 14 16 1052 2.90 106.46 28.4 43.4 25.4 10.9
7.3 8.9 1954 0.80 197.75 ** ** ** **
8.7 11 1638 0.95 165.85 14.4 15.6 14.4 4.4
11 13 1286 1.25 130.16 17.0 16.3 17.0 5.1
14 17 992 1.60 100.45 18.5 16.9 18.5 5.7
15 18 987 1.35 99.87 18.5 17.0 18.5 5.7
17 21 821 1.90 83.09 19.1 17.3 17.4 6.1
19 23 762 2.05 77.11 19.3 17.4 16.7 6.2 KH073-11P-90S/L-04F 65 470
21 25 698 2.25 70.67 19.5 17.6 16.0 6.3
22 27 639 2.45 64.67 19.7 17.7 15.5 6.4
24 29 605 2.60 61.25 19.8 17.7 15.0 6.5
30 37 470 1.35 47.56 20.0 17.5 13.9 6.3
39 48 363 2.10 36.72 20.2 17.9 12.4 6.6
47 57 304 3.00 30.79 20.3 18.1 11.5 6.8
15 18 988 0.85 99.98 6.0 8.9 6.0 2.2
19 23 765 1.10 77.42 9.1 12.8 9.1 2.9
22 27 638 1.30 64.62 10.3 13.2 10.3 3.3
25 30 582 1.45 58.89 10.7 13.4 10.7 3.5
29 35 496 1.70 50.17 11.2 13.7 11.2 3.7
30 36 480 1.75 48.56 11.3 13.7 11.3 3.8
35 43 407 2.05 41.17 11.6 14.0 11.3 4.0
36 44 393 2.05 39.83 11.7 14.0 11.2 4.1 KH063-11P-90S/L-04F 45 470
41 50 347 1.35 35.15 11.9 13.7 10.8 3.8
43 52 334 2.30 33.85 11.9 14.2 10.3 4.2
45 55 315 2.65 31.88 12.0 14.3 10.1 4.3
52 63 275 2.60 27.83 12.1 14.4 9.5 4.4
53 64 270 1.90 27.29 12.1 14 9.6 4.1
65 78 221 2.30 22.40 12.2 14.3 8.8 4.3
84 101 171 2.95 17.34 12.3 14.5 7.9 4.5
20 24 722 0.85 73.08 3.4 4.6 3.4 3.1
23 28 630 1.00 63.77 5.6 9.3 5.6 3.4
24 29 595 1.05 60.26 6.2 10.2 6.2 3.5
29 35 489 1.25 49.52 7.5 10.5 7.5 3.8
35 42 415 1.45 42.00 8.2 10.7 8.2 4.0
36 43 401 1.50 40.63 8.3 10.8 8.3 4.1
42 51 341 1.80 34.53 8.7 11.0 8.7 4.3 KH053-11P-90S/L-04F 32 466
46 56 311 1.95 31.46 8.9 11.1 8.9 4.4
48 58 300 1.35 30.37 9.0 10.7 9.0 4.0
53 64 271 2.15 27.39 9.1 11.2 9.1 4.5
61 73 236 2.55 23.93 9.3 11.3 9.3 4.6
75 91 191 2.20 19.35 9.4 11.1 9.4 4.4
97 117 148 2.80 14.98 9.6 11.3 9.1 4.6

Legend see page 363 ** ... on request

390 WG20 Gear Units and Geared Motors www.weg.net

 PN = 1.5 kW IE3
50 Hz 60 Hz at 50 Hz

1.5 kW 1.8 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
32 39 441 0.95 44.64 2.6 3.4 2.6 2.1
33 40 434 0.95 43.93 2.9 4.1 2.9 2.2
39 48 363 1.10 36.78 4.5 7.5 4.5 2.4
40 48 361 1.15 36.54 4.6 7.8 4.6 2.5
48 58 300 1.10 30.39 5.5 8.0 5.5 2.4
49 59 295 1.25 29.81 5.5 8.3 5.5 2.7
52 62 278 1.45 28.13 5.7 8.4 5.7 2.8
62 74 233 1.35 23.57 6.1 8.3 6.1 2.7 KH043-11P-90S/L-04F 29 464
68 83 210 1.95 21.25 6.3 8.7 6.3 3.1
75 91 191 1.55 19.29 6.4 8.5 6.4 2.9
83 101 172 2.35 17.39 6.6 8.8 6.6 3.2
98 118 147 1.90 14.85 6.7 8.7 6.7 3.1
103 124 139 2.90 14.10 6.7 8.9 6.7 3.3
129 156 111 2.40 11.22 6.8 8.9 6.7 3.3
158 191 91 2.80 9.18 6.9 9.0 6.1 3.4
67 81 214 0.95 21.67 3.5 2.4 3.5 2.4
75 91 191 0.90 19.37 3.9 2.3 3.9 2.3
88 107 163 1.25 16.47 4.3 2.7 4.3 2.7
97 117 148 1.15 14.96 4.4 2.6 4.4 2.6 K
113 137 127 1.60 12.81 4.6 2.9 4.6 2.9
KH033-11P-90S/L-04F 25 462
121 147 118 1.40 11.94 4.7 2.8 4.7 2.8
145 176 99 2.05 10.00 4.8 3.1 4.8 3.1
161 194 89 1.85 9.03 4.9 3.0 4.9 3.0
211 256 68 2.20 6.86 5.0 3.2 5.0 3.2
272 329 53 2.60 5.34 5.0 3.3 5.0 3.3
122 147 118 0.80 11.92 ** ** ** **
139 169 103 0.85 10.40 5.0 2.8 5.0 2.8
157 190 91 0.90 9.25 5.0 2.8 5.0 2.8
170 206 84 0.95 8.51 4.8 2.8 4.8 2.8
190 230 75 1.05 7.63 4.6 2.8 4.6 2.8 KH022-11P-90S/L-04F 23 460
210 254 68 1.10 6.91 4.4 2.8 4.4 2.8
243 294 59 1.20 5.96 4.2 2.8 4.2 2.8
279 338 51 1.30 5.20 4.0 2.8 4.0 2.8
380 459 38 1.55 3.82 3.6 2.8 3.6 2.8

Legend see page 363 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 391

 PN = 2.2 kW IE3
50 Hz 60 Hz at 50 Hz

2.2 kW 2.6 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
0.94 1.1 19799 0.95 1530.83 70.0 114.9 70.0 114.9
0.95 1.2 19437 0.95 1502.83 71.8 115.2 71.8 115.2
0.99 1.2 18694 1.00 1449.16 75.2 115.7 75.2 115.7 KH155-11P-100L-04E 698 492
1.1 1.4 16447 1.10 1281.49 84.0 117.4 84.0 117.4
1.4 1.7 13125 1.40 1038.59 93.9 120.0 93.9 120.0
1.1 1.3 17283 1.05 1308.92 81.0 116.8 81.0 116.8
1.3 1.5 14764 1.25 1127.36 89.4 118.7 89.4 118.7
1.4 1.7 13511 1.35 1035.99 92.9 119.7 92.9 119.7
1.5 1.8 12665 1.45 975.12 95.0 120.3 95.0 120.3
1.6 1.9 11701 1.55 904.58 97.2 121.1 97.2 121.1
1.8 2.2 10235 1.80 799.45 100.1 122.2 100.1 122.2
KH154-11P-100L-04E 685 490
1.9 2.3 9860 1.85 771.80 100.8 122.5 100.8 122.5
2.1 2.5 8706 2.10 688.57 102.6 123.4 102.6 123.4
2.4 2.9 7422 2.45 595.58 104.4 124.3 104.4 124.3
2.5 3.0 7241 2.50 582.27 104.7 124.5 104.7 124.5
2.8 3.4 6191 2.95 507.30 105.8 125.3 105.8 125.3
2.9 3.5 6108 2.95 500.51 105.9 125.3 105.9 125.3
1.2 1.4 16271 0.80 1219.69 ** ** ** **
K 1.3 1.6 14100 0.95 1063.46 66.6 83.4 66.6 83.4
1.4 1.7 13534 1.00 1022.92 68.6 83.9 68.6 83.9
1.6 1.9 12070 1.10 916.04 73.3 85.4 73.3 85.4
1.8 2.2 10513 1.25 802.79 77.5 87.0 77.5 87.0
1.9 2.3 10040 1.30 768.25 78.6 87.4 78.6 87.4
2.1 2.5 9091 1.45 699.95 80.6 88.4 80.6 88.4
2.2 2.6 8557 1.55 661.56 81.7 88.9 81.7 88.9
2.3 2.8 7981 1.65 619.56 82.7 89.5 82.7 89.5
KH124-11P-100L-04E 431 486
2.4 2.9 7751 1.70 602.92 83.1 89.7 83.1 89.7
2.7 3.2 6887 1.90 540.20 84.5 90.6 84.5 90.6
2.8 3.4 6592 2.00 519.19 84.9 90.9 84.9 90.9
3.1 3.8 5847 2.25 465.31 85.8 91.6 85.8 91.6
3.2 3.9 5591 2.35 446.82 86.1 91.9 86.1 91.9
3.3 4.0 5443 2.40 435.90 86.3 92.0 86.3 92.0
3.6 4.4 4952 2.65 400.70 86.8 92.5 86.8 92.5
3.7 4.5 4736 2.75 384.88 87.1 92.8 87.1 92.8
3.8 4.6 4667 2.80 380.06 87.1 92.8 87.1 92.8
1.9 2.3 10053 0.80 753.64 ** ** ** **
2.0 2.4 9739 0.85 731.54 35.4 58.0 35.4 58.0
2.2 2.6 8769 0.95 661.38 41.8 59.1 41.8 59.1
2.3 2.8 8363 1.00 632.05 44.0 59.6 44.0 59.6
2.5 3.0 7565 1.10 574.12 47.7 60.5 47.7 60.5
2.8 3.4 6698 1.20 510.43 51.1 61.5 51.1 61.5
2.9 3.5 6496 1.25 496.04 51.8 61.7 51.8 61.7
3.2 3.9 5767 1.40 443.08 54.1 62.6 54.1 62.6
3.4 4.1 5472 1.50 422.20 55.0 62.9 55.0 62.9
3.7 4.6 4931 1.65 382.82 56.3 63.5 56.3 63.5
KH104-11P-100L-04E 308 482
3.9 4.8 4711 1.70 366.49 56.9 63.8 56.9 63.8
4.0 4.9 4607 1.75 359.12 57.1 63.9 57.1 63.9
4.5 5.5 4020 2.00 316.65 58.3 64.6 58.3 64.6
4.6 5.6 3950 2.05 311.74 58.4 64.7 58.4 64.7
5.3 6.5 3374 2.40 270.17 59.4 65.3 59.4 65.3
5.5 6.6 3275 2.45 262.82 59.5 65.4 59.5 65.4
5.7 6.9 3145 2.55 253.44 59.7 65.6 59.7 65.6
6.1 7.5 2867 2.80 233.43 60.1 65.9 60.1 65.9
6.3 7.6 2790 2.90 228.15 60.2 66.0 60.2 66.0
6.5 7.9 2679 3.00 220.00 60.3 66.1 60.3 66.1

Legend see page 363 ** ... on request

392 WG20 Gear Units and Geared Motors www.weg.net

 PN = 2.2 kW IE3
50 Hz 60 Hz at 50 Hz

2.2 kW 2.6 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
3.3 4.0 5757 0.80 431.58 ** ** ** **
3.9 4.8 4837 0.95 364.86 25.6 38.8 25.6 38.8
4.1 4.9 4673 1.00 353.21 26.8 39.1 26.8 39.1
4.8 5.8 3927 1.15 298.61 31.2 40.0 31.2 40.0
5.0 6.1 3759 1.20 286.42 32.0 40.2 32.0 40.2
5.9 7.2 3145 1.45 242.14 34.6 41.0 34.6 41.0
KH094-11P-100L-04E 179 478
6.0 7.3 3114 1.45 239.77 34.7 41.0 34.7 41.0
7.1 8.6 2600 1.75 202.70 36.4 41.7 36.4 41.7
7.4 9.0 2483 1.85 194.32 36.7 41.8 36.7 41.8
7.7 9.3 2389 1.90 187.38 36.9 42.0 36.9 42.0
8.7 11 2069 2.20 164.28 37.7 42.4 37.7 42.4
9.1 11 1986 2.30 158.41 37.9 42.5 37.9 42.5
8.5 10 2478 1.85 169.25 36.7 41.8 36.7 41.8
10 12 2095 2.15 143.08 37.7 42.3 37.7 42.3 476
KH093-11P-100L-04E 166
12 14 1813 2.50 123.86 38.2 42.7 38.2 42.7
13 16 1606 2.85 109.70 38.6 43.0 38.6 43.0
4.8 5.9 3966 0.80 297.29 ** ** ** **
4.9 6.0 3895 0.80 292.01 ** ** ** **
5.2 6.3 3675 0.85 276.09 11.4 17.4 11.4 7.1 K
6.0 7.2 3196 0.95 241.07 17.6 30.5 17.6 7.8
6.1 7.4 3131 1.00 236.66 18.2 31.8 18.2 7.9
6.2 7.6 3058 1.00 231.12 18.9 33.3 18.9 8.0
KH084-11P-100L-04E 129 474
6.3 7.6 3019 1.00 228.21 19.2 33.9 19.2 8.0
7.1 8.6 2654 1.15 201.80 22.0 40.1 22.0 8.6
7.7 9.3 2453 1.25 187.31 23.2 41.4 23.2 8.9
7.9 9.7 2361 1.30 180.62 23.7 41.5 23.7 9.0
8.8 11 2124 1.45 163.55 24.9 41.9 24.9 9.4
9.1 11 2044 1.50 157.71 25.3 42.0 25.3 9.5
7.0 8.5 3018 1.00 206.12 19.2 33.9 19.2 8.0
8.8 11 2389 1.30 163.14 23.6 41.5 23.6 9.0
10 12 2086 1.45 142.45 25.1 41.9 25.1 9.4
11 14 1843 1.65 125.90 26.1 42.3 26.1 9.8
13 16 1559 1.95 106.46 27.1 42.7 27.1 10.2 KH083-11P-100L-04E 116 472
16 19 1340 2.25 91.51 27.7 43.0 25.5 10.5
18 22 1170 2.60 79.89 28.1 43.3 24.1 10.8
21 25 1002 3.00 68.44 28.5 43.5 22.5 11.0
32 38 666 2.45 45.48 29.0 43.7 19.1 11.2
11 13 1906 0.85 130.16 11.6 15.1 11.6 3.8
14 17 1471 1.10 100.45 15.8 16.0 15.8 4.7
17 21 1217 1.30 83.09 17.4 16.5 17.4 5.2
19 23 1129 1.40 77.11 17.9 16.7 17.9 5.4
20 25 1035 1.50 70.67 18.3 16.9 17.6 5.6
22 27 947 1.65 64.67 18.7 17.0 16.8 5.8
23 28 897 1.75 61.25 18.9 17.1 16.4 5.9
KH073-11P-100L-04E 75 470
28 34 757 2.05 51.72 19.3 17.4 15.0 6.2
29 35 730 2.15 49.88 19.4 17.5 14.8 6.2
34 41 624 2.50 42.61 19.7 17.7 13.7 6.5
37 45 573 2.75 39.17 19.8 17.8 13.2 6.6
39 48 538 1.45 36.72 19.9 17.3 13.2 6.1
47 57 451 2.05 30.79 20.1 17.6 12.2 6.3
59 72 354 2.60 24.17 20.2 17.9 11.0 6.6

Legend see page 363 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 393

 PN = 2.2 kW IE3
50 Hz 60 Hz at 50 Hz

2.2 kW 2.6 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
24 30 862 1.00 58.89 8.0 12.5 8.0 2.6
29 35 735 1.15 50.17 9.4 12.9 9.4 3.0
30 36 711 1.20 48.56 9.7 13.0 9.7 3.1
35 42 603 1.40 41.17 10.5 13.4 10.5 3.4
36 44 583 1.40 39.83 10.7 13.4 10.7 3.5
42 52 496 1.55 33.85 11.2 13.7 11.2 3.7
45 55 467 1.80 31.88 11.4 13.8 10.9 3.8
52 63 407 1.80 27.83 11.6 14.0 10.2 4.0
KH063-11P-100L-04E 55 468
53 64 400 1.30 27.29 11.7 13.5 10.4 3.5
59 72 355 2.25 24.25 11.8 14.1 9.6 4.2
64 78 328 1.55 22.40 11.9 13.8 9.5 3.8
65 79 323 2.10 22.07 11.9 14.2 9.2 4.3
72 87 293 2.55 20.00 12.0 14.3 8.8 4.4
83 101 254 2.00 17.34 12.2 14.1 8.4 4.2
88 106 240 2.90 16.40 12.2 14.5 8.0 4.5
109 132 193 2.60 13.19 12.3 14.4 7.4 4.4
29 35 725 0.85 49.52 3.3 4.4 3.3 3.1
34 42 615 1.00 42.00 5.9 9.9 5.9 3.4
K 35 43 595 1.05 40.63 6.2 10.2 6.2 3.5
42 51 506 1.20 34.53 7.3 10.5 7.3 3.8
43 52 488 1.25 33.30 7.5 10.5 7.5 3.8
46 55 461 1.35 31.46 7.8 10.6 7.8 3.9
52 64 401 1.45 27.39 8.3 10.8 8.3 4.1
60 73 350 1.75 23.93 8.7 10.9 8.7 4.2 KH053-11P-100L-04E 42 466
61 74 345 1.20 23.58 8.7 10.5 8.7 3.8
73 88 289 2.10 19.73 9.0 11.1 9.0 4.4
74 90 283 1.50 19.35 9.1 10.7 9.1 4.0
89 108 237 2.55 16.19 9.3 11.3 9.3 4.6
96 116 219 1.90 14.98 9.3 11.0 9.3 4.3
104 127 201 3.00 13.75 9.4 11.4 9.1 4.7
126 153 167 2.50 11.40 9.5 11.3 8.5 4.6
48 59 436 0.85 29.81 2.8 3.9 2.8 2.2
50 61 421 0.85 28.74 3.3 4.9 3.3 2.2
51 62 412 1.00 28.13 3.5 5.4 3.5 2.3
61 74 345 0.90 23.57 4.8 7.7 4.8 2.1
68 82 311 1.30 21.25 5.3 8.3 5.3 2.7
74 90 282 1.05 19.29 5.7 8.0 5.7 2.4
83 100 255 1.60 17.39 5.9 8.5 5.9 2.9
97 118 217 1.30 14.85 6.3 8.4 6.3 2.8
102 124 206 1.95 14.10 6.3 8.7 6.3 3.1 KH043-11P-100L-04E 38 464
122 148 173 2.35 11.81 6.6 8.8 6.6 3.2
128 156 164 1.60 11.22 6.6 8.7 6.6 3.1
150 182 140 2.70 9.57 6.7 8.9 6.5 3.3
155 189 135 2.75 9.23 6.7 9.0 6.4 3.4
156 190 134 1.90 9.18 6.7 8.8 6.5 3.2
193 235 109 2.25 7.44 6.8 8.9 5.9 3.3
230 280 91 2.55 6.23 6.9 9.0 5.5 3.4
284 346 74 3.00 5.05 6.9 9.1 5.0 3.5
87 106 241 0.85 16.47 2.9 2.3 2.9 2.3
112 136 188 1.10 12.81 3.9 2.6 3.9 2.6
120 146 175 0.95 11.94 4.1 2.4 4.1 2.4
144 175 146 1.40 10.00 4.4 2.8 4.4 2.8
KH033-11P-100L-04E 35 462
159 193 132 1.25 9.03 4.6 2.7 4.6 2.7
209 254 100 1.50 6.86 4.8 2.9 4.8 2.9
269 327 78 1.80 5.34 5.0 3.1 5.0 3.1
344 418 61 2.10 4.17 4.7 3.2 4.7 3.2

Legend see page 363

394 WG20 Gear Units and Geared Motors www.weg.net

 PN = 3.0 kW IE3
50 Hz 60 Hz at 50 Hz

3.0 kW 3.6 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
1.1 1.4 22696 0.80 1281.49 ** ** ** **
KH155-11P-L100L-04F 705 492
1.4 1.7 18207 1.00 1038.59 77.3 116.1 77.3 116.1
1.1 1.3 23728 0.80 1308.92 ** ** ** **
1.3 1.5 20353 0.90 1127.36 67.1 114.5 67.1 114.5
1.4 1.7 18627 1.00 1035.99 75.5 115.8 75.5 115.8
1.5 1.8 17496 1.05 975.12 80.2 116.6 80.2 116.6
1.6 1.9 16164 1.15 904.58 85.0 117.7 85.0 117.7
1.8 2.2 14198 1.30 799.45 91.1 119.2 91.1 119.2
1.9 2.3 13678 1.35 771.80 92.5 119.6 92.5 119.6
2.1 2.5 12128 1.50 688.57 96.2 120.7 96.2 120.7
KH154-11P-L100L-04F 692 490
2.4 2.9 10383 1.75 595.58 99.8 122.1 99.8 122.1
2.5 3.0 10130 1.80 582.27 100.3 122.3 100.3 122.3
2.8 3.4 8716 2.10 507.30 102.6 123.3 102.6 123.3
2.9 3.5 8653 2.10 503.64 102.7 123.4 102.7 123.4
3.3 4.0 7399 2.45 436.93 104.5 124.4 104.5 124.4
3.4 4.2 7068 2.55 419.11 104.9 124.6 104.9 124.6
3.8 4.6 6281 2.90 377.93 105.8 125.2 105.8 125.2
3.9 4.7 6135 2.95 369.91 105.9 125.3 105.9 125.3
1.6 1.9 16606 0.80 916.04 ** ** ** ** K
1.8 2.2 14493 0.90 802.79 65.1 83.0 65.1 83.0
1.9 2.3 13841 0.95 768.25 67.5 83.6 67.5 83.6
2.1 2.5 12559 1.05 699.95 71.9 84.9 71.9 84.9
2.2 2.6 11846 1.10 661.56 74.0 85.6 74.0 85.6
2.3 2.8 11048 1.20 619.56 76.2 86.4 76.2 86.4
2.4 2.9 10730 1.25 602.92 77.0 86.7 77.0 86.7
2.7 3.2 9554 1.40 540.20 79.7 87.9 79.7 87.9
2.8 3.4 9164 1.45 519.19 80.5 88.3 80.5 88.3
3.1 3.7 8162 1.60 465.31 82.4 89.3 82.4 89.3
3.2 3.9 7805 1.70 446.82 83.0 89.7 83.0 89.7
3.3 4.0 7599 1.75 435.90 83.4 89.9 83.4 89.9 KH124-11P-L100L-04F 438 486
3.6 4.3 6942 1.90 400.70 84.4 90.5 84.4 90.5
3.7 4.5 6640 2.00 384.88 84.8 90.8 84.8 90.8
3.8 4.6 6557 2.00 380.06 84.9 90.9 84.9 90.9
4.3 5.2 5636 2.35 331.43 86.1 91.9 86.1 91.9
4.4 5.3 5601 2.35 329.39 86.1 91.9 86.1 91.9
4.5 5.5 5402 2.45 319.02 86.4 92.1 86.4 92.1
4.7 5.7 5187 2.55 307.62 86.6 92.3 86.6 92.3
5.1 6.1 4745 2.75 283.73 87.0 92.7 87.0 92.7
5.2 6.3 4632 2.85 278.15 87.2 92.9 87.2 92.9
5.4 6.5 4448 2.95 268.22 87.3 93.0 87.3 93.0
5.5 6.6 4349 3.00 262.80 87.4 93.1 87.4 93.1
2.5 3.0 10407 0.80 574.12 ** ** ** **
2.8 3.4 9215 0.90 510.43 39.1 58.6 39.1 58.6
2.9 3.5 8955 0.90 496.04 40.7 58.9 40.7 58.9
3.2 3.9 7950 1.05 443.08 46.0 60.1 46.0 60.1
3.4 4.1 7560 1.10 422.20 47.8 60.5 47.8 60.5
3.8 4.5 6827 1.20 382.82 50.7 61.4 50.7 61.4
3.9 4.7 6522 1.25 366.49 51.8 61.7 51.8 61.7
4.0 4.8 6378 1.30 359.12 52.2 61.9 52.2 61.9
4.5 5.5 5589 1.45 316.65 54.6 62.8 54.6 62.8
4.6 5.6 5491 1.50 311.74 54.9 62.9 54.9 62.9
5.3 6.4 4720 1.70 270.17 56.8 63.8 56.8 63.8 KH104-11P-L100L-04F 315 482
5.5 6.6 4582 1.75 262.82 57.1 63.9 57.1 63.9
5.7 6.9 4400 1.85 253.44 57.5 64.1 57.5 64.1
6.2 7.5 4027 2.00 233.43 58.3 64.6 58.3 64.6
6.3 7.6 3928 2.05 228.15 58.4 64.7 58.4 64.7
6.5 7.9 3772 2.15 220.00 58.7 64.9 58.7 64.9
6.7 8.0 3705 2.20 216.51 58.8 64.9 58.8 64.9
7.3 8.8 3345 2.40 197.12 59.4 65.3 59.4 65.3
7.6 9.2 3212 2.50 190.08 59.6 65.5 59.6 65.5
7.7 9.3 3169 2.55 187.95 59.7 65.5 59.7 65.5
8.9 11 2687 3.00 162.39 60.3 66.1 60.3 66.1

Legend see page 363 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 395

 PN = 3.0 kW IE3
50 Hz 60 Hz at 50 Hz

3.0 kW 3.6 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
4.8 5.8 5402 0.85 298.61 20.6 34.3 20.6 34.3
5.0 6.1 5171 0.90 286.42 22.8 38.4 22.8 38.4
5.9 7.2 4345 1.05 242.14 28.9 39.5 28.9 39.5
6.0 7.3 4302 1.05 239.77 29.2 39.5 29.2 39.5
7.1 8.6 3607 1.25 202.70 32.7 40.4 32.7 40.4 KH094-11P-L100L-04F 186 478
7.4 9.0 3444 1.35 194.32 33.4 40.6 33.4 40.6
7.7 9.3 3314 1.40 187.38 34.0 40.8 34.0 40.8
8.8 11 2882 1.60 164.28 35.5 41.3 35.5 41.3
9.1 11 2773 1.65 158.41 35.8 41.5 35.8 41.5
8.5 10 3367 1.35 169.25 33.7 40.7 33.7 40.7
10 12 2847 1.60 143.08 35.6 41.4 35.6 41.4
12 14 2464 1.85 123.86 36.7 41.9 36.7 41.9
13 16 2183 2.10 109.70 37.5 42.2 37.5 42.2 KH093-11P-L100L-04F 173 476
15 18 1888 2.40 94.90 38.1 42.6 38.1 42.6
16 19 1821 2.50 91.51 38.2 42.7 38.2 42.7
18 22 1606 2.85 80.74 38.6 43.0 38.6 43.0
7.1 8.6 3651 0.85 201.80 11.8 18.2 11.8 7.1
7.7 9.3 3382 0.90 187.31 15.6 26.2 15.6 7.5
K 8.0 9.6 3254 0.95 180.62 17.0 29.2 17.0 7.7 KH084-11P-L100L-04F 136 474
8.8 11 2935 1.05 163.55 19.9 35.5 19.9 8.2
9.1 11 2824 1.10 157.71 20.8 37.4 20.8 8.3
8.8 11 3246 0.95 163.14 17.1 29.4 17.1 7.7
10 12 2834 1.10 142.45 20.7 37.2 20.7 8.3
11 14 2505 1.20 125.90 22.9 41.3 22.9 8.8
14 16 2118 1.45 106.46 24.9 41.9 24.9 9.4
16 19 1821 1.65 91.51 26.2 42.3 26.2 9.8
18 22 1589 1.90 79.89 27.0 42.7 25.5 10.2
21 25 1362 2.25 68.44 27.7 43.0 23.7 10.5 KH083-11P-L100L-04F 123 472
22 26 1313 2.30 66.00 27.8 43.1 23.3 10.6
23 28 1256 2.30 63.12 27.9 43.1 22.8 10.6
25 30 1159 2.60 58.25 28.2 43.3 21.9 10.8
26 32 1096 2.75 55.11 28.3 43.4 21.5 10.9
32 38 905 1.80 45.48 28.7 43.2 20 10.7
40 48 716 2.30 35.99 29.0 43.6 18.1 11.1
14 17 1999 0.80 100.45 ** ** ** **
17 21 1653 0.95 83.09 14.3 15.6 14.3 4.3
19 23 1534 1.05 77.11 15.3 15.8 15.3 4.6
20 25 1406 1.15 70.67 16.2 16.1 16.2 4.8
22 27 1287 1.25 64.67 17.0 16.3 17.0 5.1
24 28 1219 1.30 61.25 17.4 16.5 17.4 5.2
28 34 1029 1.55 51.72 18.3 16.9 16.2 5.6
29 35 992 1.60 49.88 18.5 16.9 15.9 5.7
34 41 848 1.85 42.61 19.0 17.2 14.7 6.0 KH073-11P-L100L-04F 82 470
37 44 779 2.00 39.17 19.3 17.4 14.1 6.1
39 47 731 1.05 36.72 19.4 16.7 14.1 5.5
44 54 645 2.45 32.40 19.7 17.7 12.9 6.4
47 57 613 1.50 30.79 19.7 17.1 12.9 5.8
52 63 548 2.85 27.56 19.9 17.9 11.9 6.6
60 72 481 1.90 24.17 20.0 17.5 11.5 6.2
77 93 371 2.50 18.65 20.2 17.8 10.3 6.6
93 113 307 3.00 15.43 20.3 18.0 9.4 6.8

Legend see page 363 ** ... on request

396 WG20 Gear Units and Geared Motors www.weg.net

 PN = 3.0 kW IE3
50 Hz 60 Hz at 50 Hz

3.0 kW 3.6 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
29 35 998 0.85 50.17 5.8 8.5 5.8 2.2
30 36 966 0.85 48.56 6.4 9.8 6.4 2.3
35 42 819 1.05 41.17 8.6 12.7 8.6 2.7
36 44 792 1.05 39.83 8.9 12.8 8.9 2.8
43 51 673 1.15 33.85 10.0 13.1 10.0 3.2
45 55 634 1.30 31.88 10.3 13.3 10.3 3.3
52 63 554 1.30 27.83 10.9 13.5 10.9 3.6
53 64 543 0.95 27.29 10.9 12.8 10.9 2.9
54 65 534 1.35 26.84 11.0 13.6 10.8 3.6
59 72 482 1.65 24.25 11.3 13.7 10.3 3.8
64 78 446 1.15 22.40 11.5 13.3 10.2 3.3 KH063-11P-L100L-04F 62 468
65 79 439 1.55 22.07 11.5 13.9 9.8 3.9
72 87 398 1.90 20.00 11.7 14.0 9.3 4.0
83 100 345 1.45 17.34 11.9 13.7 9.0 3.8
88 106 326 2.15 16.40 11.9 14.2 8.5 4.3
103 125 277 2.40 13.94 12.1 14.4 7.9 4.4
109 132 262 1.95 13.19 12.1 14.1 7.9 4.1
126 152 228 2.75 11.46 12.2 14.5 7.2 4.6
130 157 220 2.85 11.05 12.2 14.6 7.1 4.6 K
132 160 216 2.35 10.88 12.2 14.3 7.2 4.3
161 195 177 2.85 8.92 12.3 14.5 6.6 4.5
42 50 687 0.90 34.53 4.4 6.7 4.4 3.2
43 52 663 0.95 33.30 5.0 8.0 5.0 3.3
46 55 626 1.00 31.46 5.7 9.5 5.7 3.4
53 64 545 1.10 27.39 6.9 10.3 6.9 3.6
60 73 476 1.30 23.93 7.7 10.6 7.7 3.9
61 74 469 0.90 23.58 7.7 9.9 7.7 3.2
73 88 393 1.55 19.73 8.4 10.8 8.4 4.1
74 90 385 1.10 19.35 8.4 10.3 8.4 3.6
KH053-11P-L100L-04F 48 466
89 107 322 1.90 16.19 8.8 11.0 8.8 4.3
96 116 298 1.40 14.98 9.0 10.7 9.0 4.0
105 127 274 2.20 13.75 9.1 11.2 9.1 4.5
126 153 227 1.85 11.40 9.3 11.0 9.0 4.3
127 154 225 2.70 11.31 9.3 11.3 8.7 4.6
132 159 217 2.80 10.91 9.3 11.3 8.6 4.6
153 185 187 2.25 9.40 9.5 11.2 8.2 4.5
187 226 153 2.70 7.71 9.5 11.3 7.5 4.6
68 82 423 0.95 21.25 3.2 4.7 3.2 2.2
75 90 384 0.80 19.29 ** ** ** **
83 100 346 1.20 17.39 4.8 8.1 4.8 2.5
97 117 295 0.95 14.85 5.5 8.0 5.5 2.4
102 123 281 1.45 14.10 5.7 8.4 5.7 2.8
122 147 235 1.75 11.81 6.1 8.6 6.1 3.0
128 155 223 1.20 11.22 6.2 8.4 6.2 2.8
KH043-11P-L100L-04F 45 464
150 182 190 2.00 9.57 6.4 8.7 6.4 3.1
156 189 184 2.05 9.23 6.5 8.8 6.5 3.2
157 190 183 1.40 9.18 6.5 8.6 6.5 3.0
194 234 148 1.65 7.44 6.7 8.7 6.2 3.1
231 279 124 1.90 6.23 6.8 8.9 5.7 3.3
285 345 100 2.20 5.05 6.9 9.0 5.2 3.4
296 357 97 2.30 4.87 6.9 9.0 5.2 3.4
112 136 255 0.80 12.81 ** ** ** **
144 174 199 1.05 10.00 3.7 2.5 3.7 2.5
159 193 180 0.95 9.03 4.0 2.4 4.0 2.4
KH033-11P-L100L-04F 41 462
210 254 136 1.10 6.86 4.5 2.7 4.5 2.7
270 326 106 1.30 5.34 4.8 2.9 4.8 2.9
345 417 83 1.55 4.17 4.9 3.1 4.9 3.1

Legend see page 363 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 397

 PN = 4.0 kW IE3
50 Hz 60 Hz at 50 Hz

4.0 kW 4.8 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
1.4 1.8 23487 0.80 1001.50 ** ** ** ** KH155-11P-112M-04E 706 492
1.5 1.8 23406 0.80 975.12 ** ** ** **
1.6 1.9 21669 0.85 904.58 59.3 102.1 59.3 102.1
1.8 2.2 19072 0.95 799.45 73.5 115.4 73.5 115.4
1.9 2.3 18549 1.00 779.11 75.8 115.8 75.8 115.8
2.1 2.5 16292 1.15 688.57 84.6 117.6 84.6 117.6
2.2 2.6 15945 1.15 673.90 85.7 117.8 85.7 117.8
2.4 2.9 14006 1.30 595.58 91.6 119.3 91.6 119.3
2.5 3.0 13664 1.35 582.27 92.5 119.6 92.5 119.6
2.9 3.5 11807 1.55 507.30 97.0 121.0 97.0 121.0
KH154-11P-112M-04E 693 490
3.3 4.0 10065 1.80 436.93 100.4 122.3 100.4 122.3
3.5 4.2 9615 1.90 419.11 101.2 122.7 101.2 122.7
3.8 4.6 8598 2.10 377.93 102.8 123.4 102.8 123.4
3.9 4.7 8499 2.15 374.35 103.0 123.5 103.0 123.5
4.0 4.9 8162 2.25 360.98 103.4 123.8 103.4 123.8
4.5 5.4 7245 2.50 323.79 104.6 124.5 104.6 124.5
4.6 5.5 7114 2.55 318.60 104.8 124.6 104.8 124.6
4.7 5.7 6900 2.65 310.30 105.1 124.7 105.1 124.7
K 5.3 6.4 6039 3.00 275.58 106.0 125.4 106.0 125.4
2.1 2.5 16801 0.80 699.95 ** ** ** **
2.2 2.7 15847 0.85 661.56 59.2 81.6 59.2 81.6
2.3 2.8 14811 0.90 619.56 63.8 82.7 63.8 82.7
2.4 2.9 14383 0.95 602.92 65.5 83.1 65.5 83.1
2.7 3.2 12834 1.05 540.20 71.0 84.6 71.0 84.6
2.8 3.4 12310 1.10 519.19 72.6 85.2 72.6 85.2
3.1 3.8 10987 1.20 465.31 76.3 86.5 76.3 86.5
3.2 3.9 10529 1.25 446.82 77.5 86.9 77.5 86.9
3.3 4.0 10251 1.30 435.90 78.1 87.2 78.1 87.2
3.6 4.4 9384 1.40 400.70 80.0 88.1 80.0 88.1
3.8 4.6 8995 1.45 384.88 80.8 88.5 80.8 88.5
4.4 5.3 7666 1.70 331.43 83.2 89.8 83.2 89.8 KH124-11P-112M-04E 439 486
4.5 5.5 7349 1.80 319.02 83.8 90.1 83.8 90.1
4.7 5.7 7072 1.85 307.62 84.2 90.4 84.2 90.4
5.1 6.2 6469 2.05 283.73 85.0 91.0 85.0 91.0
5.2 6.3 6328 2.10 278.15 85.2 91.2 85.2 91.2
5.4 6.5 6090 2.15 268.22 85.5 91.4 85.5 91.4
5.5 6.7 5954 2.20 262.80 85.7 91.5 85.7 91.5
5.9 7.2 5490 2.40 244.33 86.3 92.0 86.3 92.0
6.1 7.3 5372 2.45 239.59 86.4 92.1 86.4 92.1
6.3 7.6 5159 2.55 231.04 86.6 92.3 86.6 92.3
7.0 8.5 4540 2.90 206.32 87.2 92.9 87.2 92.9
7.3 8.8 4360 3.00 198.95 87.4 93.1 87.4 93.1
3.3 4.0 10635 0.80 443.08 ** ** ** **
3.4 4.2 10134 0.80 422.20 ** ** ** **
3.8 4.6 9151 0.90 382.82 39.5 58.7 39.5 58.7
4.0 4.8 8743 0.95 366.49 41.9 59.2 41.9 59.2
4.6 5.5 7508 1.10 316.65 48.0 60.6 48.0 60.6
4.7 5.6 7391 1.10 311.74 48.5 60.7 48.5 60.7
5.4 6.5 6353 1.30 270.17 52.3 61.9 52.3 61.9
5.5 6.7 6180 1.30 262.82 52.9 62.1 52.9 62.1
5.7 6.9 5948 1.35 253.44 53.6 62.4 53.6 62.4 KH104-11P-112M-04E 316 482
6.2 7.5 5444 1.50 233.43 55.0 62.9 55.0 62.9
6.4 7.7 5310 1.55 228.15 55.4 63.1 55.4 63.1
6.6 8.0 5110 1.60 220.00 55.9 63.3 55.9 63.3
6.7 8.1 5029 1.60 216.51 56.1 63.4 56.1 63.4
7.4 8.9 4541 1.80 197.12 57.2 64.0 57.2 64.0
7.6 9.2 4370 1.85 190.08 57.6 64.2 57.6 64.2
7.7 9.3 4312 1.90 187.95 57.7 64.2 57.7 64.2
8.9 11 3679 2.20 162.39 58.9 65.0 58.9 65.0
10 12 3713 2.20 140.95 58.8 64.9 58.8 64.9
12 14 3280 2.45 124.50 59.5 65.4 59.5 65.4
KH103-11P-112M-04E 292 480
13 16 2847 2.85 108.07 60.1 65.9 60.1 65.9
14 17 2745 2.95 104.21 60.3 66.0 60.3 66.0

398 WG20 Gear Units and Geared Motors www.weg.net

 PN = 4.0 kW IE3
50 Hz 60 Hz at 50 Hz

4.0 kW 4.8 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
6.0 7.2 5812 0.80 242.14 ** ** ** **
7.2 8.7 4836 0.95 202.70 25.6 38.9 25.6 38.9
7.5 9.0 4626 1.00 194.32 27.1 39.1 27.1 39.1
KH094-11P-112M-04E 187 478
7.7 9.4 4452 1.05 187.38 28.3 39.3 28.3 39.3
8.8 11 3879 1.20 164.28 31.5 40.1 31.5 40.1
9.2 11 3733 1.25 158.41 32.2 40.3 32.2 40.3
8.6 10 4459 1.05 169.25 28.2 39.3 28.2 39.3
10 12 3769 1.20 143.08 32.0 40.2 32.0 40.2
12 14 3263 1.40 123.86 34.2 40.9 34.2 40.9
13 16 2890 1.60 109.70 35.5 41.3 35.5 41.3
15 18 2500 1.80 94.90 36.6 41.8 36.6 41.8
16 19 2411 1.90 91.51 36.9 41.9 36.9 41.9 KH093-11P-112M-04E 174 476
18 22 2127 2.15 80.74 37.6 42.3 37.6 42.3
21 26 1810 2.50 68.71 38.2 42.7 38.2 42.7
23 27 1685 2.70 63.96 38.5 42.9 38.5 42.9
24 30 1562 2.90 59.28 38.7 43.0 38.7 43.0
39 47 978 2.85 37.13 39.4 43.3 39.4 43.3
8.9 11 3926 0.80 163.55 ** ** ** **
9.2 11 3786 0.80 157.71 ** ** ** **
KH084-11P-112M-04E 137 474
K
10 12 3753 0.80 142.45 ** ** ** **
12 14 3317 0.95 125.90 16.3 27.7 16.3 7.6
14 16 2805 1.10 106.46 20.9 37.7 20.9 8.4
16 19 2411 1.25 91.51 23.4 41.4 23.4 8.9
18 22 2105 1.45 79.89 25.0 41.9 25.0 9.4
21 26 1803 1.70 68.44 26.3 42.3 25.3 9.8
22 27 1739 1.75 66.00 26.5 42.4 24.7 9.9
23 28 1663 1.75 63.12 26.8 42.5 24.2 10.0
KH083-11P-112M-04E 124 472
25 30 1535 2.00 58.25 27.2 42.7 23.3 10.2
26 32 1452 2.10 55.11 27.4 42.9 22.7 10.4
30 36 1287 2.35 48.87 27.9 43.1 21.3 10.6
32 39 1198 1.40 45.48 28.1 42.6 21.1 10.1
35 43 1085 2.80 41.18 28.3 43.4 19.8 10.9
40 49 948 1.75 35.99 28.6 43.1 19.0 10.6
46 56 828 2.35 31.43 28.8 43.3 17.8 10.8
52 63 732 2.60 27.78 28.9 43.5 16.9 11.0
19 23 2031 0.80 77.11 ** ** ** **
21 25 1862 0.85 70.67 12.1 15.2 12.1 3.9
22 27 1704 0.95 64.67 13.8 15.5 13.8 4.2
24 29 1614 1.00 61.25 14.6 15.7 14.6 4.4
28 34 1363 1.15 51.72 16.5 16.2 16.5 4.9
29 35 1337 1.20 50.75 16.7 16.2 16.7 5.0
34 41 1123 1.40 42.61 17.9 16.7 15.8 5.4
37 45 1032 1.55 39.17 18.3 16.9 15.1 5.6
39 48 967 0.80 36.72 ** ** ** **
KH073-11P-112M-04E 83 470
45 54 854 1.85 32.40 19.0 17.2 13.7 6.0
47 57 811 1.15 30.79 19.2 16.5 13.9 5.2
53 64 726 2.15 27.56 19.4 17.5 12.6 6.2
60 73 637 1.45 24.17 19.7 17.0 12.3 5.8
61 73 629 2.50 23.88 19.7 17.7 11.8 6.5
72 87 531 2.95 20.17 19.9 17.9 10.9 6.7
78 94 491 1.90 18.65 20.0 17.5 10.8 6.2
94 114 407 2.25 15.43 20.2 17.7 9.9 6.5
111 134 346 2.65 13.12 20.2 17.9 9.2 6.7

Legend see page 363 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 399

 PN = 4.0 kW IE3
50 Hz 60 Hz at 50 Hz

4.0 kW 4.8 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
35 43 1085 0.80 41.17 ** ** ** **
36 44 1049 0.80 39.83 ** ** ** **
43 52 892 0.85 33.85 7.6 12.4 7.6 2.5
45 55 840 1.00 31.88 8.3 12.6 8.3 2.7
52 63 733 1.00 27.83 9.5 12.9 9.5 3.0
54 65 707 1.00 26.84 9.7 13.0 9.7 3.1
60 72 639 1.25 24.25 10.3 13.2 10.3 3.3
65 78 590 0.85 22.40 10.6 12.6 10.6 2.7
66 80 581 1.15 22.07 10.7 13.4 10.5 3.5
73 88 527 1.45 20.00 11.0 13.6 10.0 3.6
84 101 457 1.10 17.34 11.4 13.2 9.6 3.3
KH063-11P-112M-04E 63 468
88 107 432 1.65 16.40 11.5 13.9 9.1 3.9
104 126 367 1.85 13.94 11.8 14.1 8.3 4.1
110 133 347 1.45 13.19 11.9 13.7 8.4 3.7
127 153 302 2.10 11.46 12.0 14.3 7.6 4.3
131 159 291 2.15 11.05 12.0 14.3 7.5 4.4
133 161 287 1.75 10.88 12.1 14.0 7.6 4.0
160 193 239 2.45 9.09 12.2 14.5 6.8 4.5
K 163 197 235 2.15 8.92 12.2 14.2 6.9 4.3
191 232 200 2.45 7.58 12.3 14.4 6.4 4.4
233 282 164 2.80 6.23 12.3 14.5 5.9 4.6
241 292 158 2.90 6.01 12.3 14.5 5.8 4.6
53 64 722 0.80 27.39 ** ** ** **
61 73 630 1.00 23.93 5.6 9.3 5.6 3.4
73 89 520 1.20 19.73 7.2 10.4 7.2 3.7
75 91 510 0.85 19.35 7.3 9.7 7.3 3.0
90 108 427 1.45 16.19 8.1 10.7 8.1 4.0
97 117 395 1.05 14.98 8.4 10.2 8.4 3.5
105 128 362 1.70 13.75 8.6 10.9 8.6 4.2
127 154 300 1.40 11.40 9.0 10.7 9.0 4.0 KH053-11P-112M-04E 49 466
128 155 298 2.05 11.31 9.0 11.1 9.0 4.4
133 161 287 2.10 10.91 9.0 11.1 9.0 4.4
154 187 248 1.70 9.40 9.2 10.9 8.6 4.2
162 196 236 2.40 8.97 9.3 11.3 8.2 4.6
188 228 203 2.05 7.71 9.4 11.1 7.9 4.4
221 268 173 2.40 6.55 9.5 11.2 7.3 4.5
269 326 142 2.95 5.39 9.2 11.4 6.7 4.7
83 101 458 0.90 17.39 1.9 2.0 1.9 2.0
103 124 371 1.10 14.10 4.4 7.3 4.4 2.4
123 149 311 1.30 11.81 5.3 8.3 5.3 2.7
129 156 296 0.90 11.22 5.5 8.0 5.5 2.4
152 183 252 1.50 9.57 6.0 8.5 6.0 2.9
157 190 243 1.55 9.23 6.0 8.5 6.0 2.9 KH043-11P-112M-04E 46 464
158 191 242 1.05 9.18 6.1 8.3 6.1 2.7
195 236 196 1.25 7.44 6.4 8.5 6.4 2.9
233 282 164 1.45 6.23 6.6 8.7 6.0 3.1
287 348 133 1.70 5.05 6.8 8.8 5.5 3.2
298 360 128 1.75 4.87 6.8 8.8 5.4 3.2

Legend see page 363 ** ... on request

400 WG20 Gear Units and Geared Motors www.weg.net

PN = 5.5 kW IE3
50 Hz 60 Hz at 50 Hz

5.5 kW 6.6 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
2.1 2.6 22447 0.85 688.57 53.9 90.7 53.9 90.7
2.2 2.6 22039 0.85 676.04 56.8 96.8 56.8 96.8
2.5 3.0 19336 0.95 595.58 72.2 115.2 72.2 115.2
2.9 3.5 16369 1.10 507.30 84.3 117.5 84.3 117.5
3.4 4.0 13983 1.30 436.93 91.7 119.3 91.7 119.3
3.5 4.2 13385 1.35 419.11 93.2 119.8 93.2 119.8
3.9 4.7 11971 1.55 377.93 96.6 120.9 96.6 120.9
4.0 4.8 11717 1.55 369.91 97.2 121.1 97.2 121.1
4.1 4.9 11411 1.60 360.98 97.8 121.3 97.8 121.3 KH154-11P-132S-04E 711 490
4.5 5.5 10151 1.80 323.79 100.2 122.3 100.2 122.3
4.6 5.5 9967 1.85 318.60 100.6 122.4 100.6 122.4
4.7 5.7 9768 1.85 312.23 100.9 122.5 100.9 122.5
5.3 6.4 8515 2.15 275.58 102.9 123.5 102.9 123.5
5.5 6.6 8241 2.20 267.26 103.3 123.7 103.3 123.7
5.6 6.7 8046 2.25 261.49 103.6 123.9 103.6 123.9
6.3 7.6 7010 2.60 231.17 104.9 124.7 104.9 124.7
6.5 7.8 6816 2.65 225.22 105.2 124.8 105.2 124.8
2.8 3.4 16960 0.80 519.19 ** ** ** **
2.9 3.4 16741 0.80 512.47 ** ** ** ** K
3.1 3.8 15138 0.90 465.31 62.4 82.3 62.4 82.3
3.3 4.0 14537 0.90 446.82 64.9 82.9 64.9 82.9
3.4 4.0 14152 0.95 435.90 66.4 83.3 66.4 83.3
3.7 4.4 12956 1.05 400.70 70.6 84.5 70.6 84.5
3.8 4.6 12445 1.05 384.88 72.2 85.0 72.2 85.0
3.9 4.6 12264 1.10 380.06 72.8 85.2 72.8 85.2
4.4 5.3 10629 1.25 331.43 77.2 86.8 77.2 86.8
4.5 5.4 10499 1.25 327.38 77.5 87.0 77.5 87.0
4.6 5.5 10210 1.30 319.02 78.2 87.3 78.2 87.3
4.8 5.7 9825 1.35 307.62 79.1 87.7 79.1 87.7 KH124-11P-132S-04E 457 486
5.2 6.2 9024 1.45 283.73 80.8 88.5 80.8 88.5
5.3 6.3 8829 1.50 278.15 81.2 88.7 81.2 88.7
5.5 6.6 8496 1.55 268.22 81.8 89.0 81.8 89.0
5.6 6.7 8307 1.60 262.80 82.1 89.2 82.1 89.2
6.0 7.2 7691 1.70 244.33 83.2 89.8 83.2 89.8
6.1 7.4 7527 1.75 239.59 83.5 90.0 83.5 90.0
6.3 7.6 7243 1.80 231.04 83.9 90.2 83.9 90.2
6.4 7.7 7169 1.85 229.14 84.0 90.3 84.0 90.3
7.1 8.6 6401 2.05 206.32 85.1 91.1 85.1 91.1
7.4 8.9 6147 2.15 198.95 85.5 91.3 85.5 91.3
8.6 10 5165 2.55 169.97 86.6 92.3 86.6 92.3
9.7 12 5418 2.40 151.11 86.3 92.1 86.3 92.1
11 13 4724 2.80 131.76 87.1 92.8 87.1 92.8 KH123-11P-132S-04E 433 484
12 14 4555 2.90 127.05 87.2 92.9 87.2 92.9
4.6 5.6 10344 0.80 316.65 ** ** ** **
4.7 5.7 10184 0.80 311.74 ** ** ** **
5.4 6.5 8772 0.95 270.17 41.7 59.1 41.7 59.1
5.6 6.7 8533 0.95 262.82 43.1 59.4 43.1 59.4
5.8 7.0 8211 1.00 253.44 44.7 59.8 44.7 59.8
6.3 7.6 7532 1.10 233.43 47.9 60.6 47.9 60.6
6.4 7.7 7362 1.10 228.15 48.6 60.8 48.6 60.8 KH104-11P-132S-04E 334 482
6.7 8.0 7084 1.15 220.00 49.7 61.1 49.7 61.1
6.8 8.2 6972 1.15 216.51 50.1 61.2 50.1 61.2
7.4 9.0 6308 1.30 197.12 52.5 62.0 52.5 62.0
7.7 9.3 6071 1.35 190.08 53.2 62.2 53.2 62.2
7.8 9.4 6003 1.35 187.95 53.4 62.3 53.4 62.3
9.0 11 5133 1.60 162.39 55.8 63.3 55.8 63.3
10 13 5054 1.60 140.95 56.0 63.4 56.0 63.4
12 14 4464 1.80 124.50 57.4 64.1 57.4 64.1
14 16 3875 2.10 108.07 58.5 64.7 58.5 64.7 KH103-11P-132S-04E 310 480
16 19 3348 2.40 93.37 59.4 65.3 59.4 65.3
18 22 2865 2.80 79.90 60.1 65.9 60.1 65.9
8.9 11 5356 0.85 164.28 21.0 35.2 21.0 35.2
KH094-11P-132S-04E 205 478
9.2 11 5154 0.90 158.41 23.0 38.4 23.0 38.4

www.weg.net WG20 Gear Units and Geared Motors 401

 PN = 5.5 kW IE3
50 Hz 60 Hz at 50 Hz

5.5 kW 6.6 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
10 12 5130 0.90 143.08 23.2 38.5 23.2 38.5
12 14 4441 1.05 123.86 28.3 39.4 28.3 39.4
13 16 3933 1.15 109.70 31.2 40.0 31.2 40.0
15 19 3402 1.35 94.90 33.6 40.7 33.6 40.7
16 19 3281 1.40 91.51 34.1 40.8 34.1 40.8
18 22 2895 1.60 80.74 35.5 41.3 35.5 41.3
21 26 2463 1.85 68.71 36.7 41.9 36.7 41.9
KH093-11P-132S-04E 192 476
23 28 2293 2.00 63.96 37.2 42.1 37.2 42.1
25 30 2125 2.15 59.28 37.6 42.3 37.6 42.3
27 33 1939 2.35 54.07 38.0 42.5 38.0 42.5
31 38 1678 2.70 46.81 38.5 42.9 38.5 42.9
39 48 1331 2.10 37.13 39.0 42.7 39.0 42.7
47 56 1125 2.50 31.39 39.3 43.0 39.3 43.0
54 65 974 2.90 27.18 39.4 43.3 39.4 43.3
14 17 3817 0.80 106.46 ** ** ** **
16 19 3281 0.95 91.51 16.7 28.6 16.7 7.7
18 22 2864 1.05 79.89 20.5 36.8 20.5 8.3
21 26 2454 1.25 68.44 23.2 41.4 23.2 8.9
K 22 27 2366 1.30 66.00 23.7 41.5 23.7 9.0
23 28 2263 1.30 63.12 24.2 41.7 24.2 9.2
25 30 2088 1.45 58.25 25.1 41.9 25.1 9.4
27 32 1976 1.55 55.11 25.6 42.1 24.3 9.6
KH083-11P-132S-04E 142 472
30 36 1752 1.75 48.87 26.4 42.4 23.0 9.9
32 39 1631 1.00 45.48 26.9 41.7 22.8 9.2
36 43 1477 2.05 41.19 27.3 42.8 21.0 10.3
41 49 1290 1.30 35.99 27.9 42.4 20.2 9.9
47 56 1127 1.75 31.43 28.2 42.7 18.9 10.2
53 64 996 1.95 27.78 28.5 43.0 17.8 10.5
62 75 842 2.30 23.49 28.8 43.3 16.5 10.8
73 87 724 2.65 20.19 29.0 43.5 15.3 11.0
28 34 1854 0.85 51.72 12.2 15.2 12.2 3.9
29 35 1820 0.90 50.75 12.6 15.2 12.6 4.0
34 41 1528 1.05 42.61 15.3 15.8 15.3 4.6
37 45 1404 1.15 39.17 16.2 16.1 15.7 4.8
45 54 1162 1.35 32.40 17.7 16.6 15.0 5.3
48 57 1104 0.85 30.79 18.0 15.6 14.4 4.3
53 64 988 1.60 27.56 18.5 17.0 13.7 5.7
61 73 867 1.10 24.17 19.0 16.3 13.3 5.0
73 88 723 2.15 20.17 19.4 17.5 11.6 6.3 KH073-11P-132S-04E 101 470
75 91 697 2.25 19.45 19.5 17.6 11.5 6.3
79 95 669 1.40 18.65 19.6 16.9 11.6 5.7
88 106 596 2.65 16.61 19.8 17.8 10.6 6.5
95 114 553 1.65 15.43 19.9 17.3 10.6 6.0
112 135 470 1.95 13.12 20.0 17.5 9.7 6.3
129 155 408 2.25 11.37 20.1 17.7 9.1 6.5
153 184 344 2.65 9.60 20.2 17.9 8.4 6.7
158 191 332 2.75 9.26 20.3 18.0 8.3 6.7
60 73 869 0.90 24.25 7.9 12.5 7.9 2.6
66 80 791 0.85 22.07 8.9 12.8 8.9 2.8
73 88 717 1.05 20.00 9.6 13.0 9.6 3.0
84 102 622 0.85 17.34 10.4 12.5 10.1 2.5
89 108 588 1.20 16.40 10.6 13.4 9.9 3.4
105 127 500 1.35 13.94 11.2 13.7 9.0 3.7
111 134 473 1.10 13.19 11.3 13.1 9.1 3.2
128 154 411 1.55 11.46 11.6 14.0 8.2 4.0
KH063-11P-132S-04E 81 468
133 160 396 1.60 11.05 11.7 14.0 8.0 4.1
135 162 390 1.30 10.88 11.7 13.5 8.2 3.6
161 194 326 1.80 9.09 11.9 14.2 7.3 4.3
164 198 320 1.60 8.92 12.0 13.8 7.4 3.9
193 233 272 1.80 7.58 12.1 14.0 6.8 4.1
235 283 223 2.10 6.23 12.2 14.3 6.2 4.3
244 294 215 2.15 6.01 12.2 14.3 6.1 4.3
297 357 177 2.45 4.94 12.3 14.5 5.6 4.5

402 WG20 Gear Units and Geared Motors www.weg.net

 PN = 5.5 kW IE3
50 Hz 60 Hz at 50 Hz

5.5 kW 6.6 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
74 89 707 0.85 19.73 3.8 5.5 3.8 3.2
90 109 580 1.05 16.19 6.4 10.2 6.4 3.5
98 118 537 0.80 14.98 ** ** ** **
107 128 493 1.25 13.75 7.5 10.5 7.5 3.8
129 155 409 1.05 11.40 8.3 10.2 8.3 3.5
130 156 406 1.50 11.31 8.3 10.8 8.3 4.1
134 162 391 1.55 10.91 8.4 10.8 8.4 4.1
KH053-11P-132S-04E 68 466
156 188 337 1.25 9.40 8.8 10.5 8.8 3.8
163 197 322 1.80 8.97 8.9 11.0 8.7 4.3
190 229 276 1.50 7.71 9.1 10.8 8.4 4.1
224 269 235 1.80 6.55 9.3 10.9 7.7 4.2
272 327 193 2.15 5.39 9.4 11.1 7.1 4.4
282 340 186 2.25 5.19 9.4 11.2 6.9 4.5
343 413 153 2.70 4.27 8.6 11.3 6.4 4.6

Legend see page 363 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 403

 PN = 7.5 kW IE3
50 Hz 60 Hz at 50 Hz

7.5 kW 9.0 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
2.9 3.5 22598 0.80 507.30 ** ** ** **
3.4 4.1 19344 0.95 436.93 72.2 115.2 72.2 115.2
3.5 4.2 18517 1.00 419.11 76.0 115.9 76.0 115.9
3.9 4.7 16629 1.10 377.93 83.4 117.3 83.4 117.3
4.0 4.8 16243 1.15 369.91 84.7 117.6 84.7 117.6
4.1 4.9 15851 1.15 360.98 86.1 117.9 86.1 117.9
4.5 5.5 14130 1.30 323.79 91.2 119.2 91.2 119.2
4.6 5.6 13904 1.30 318.60 91.9 119.4 91.9 119.4 KH154-11P-L132M-04F 725 490
4.7 5.7 13598 1.35 312.23 92.7 119.6 92.7 119.6
5.3 6.4 11903 1.55 275.58 96.7 120.9 96.7 120.9
5.5 6.6 11520 1.60 267.26 97.6 121.2 97.6 121.2
5.6 6.8 11271 1.60 261.49 98.1 121.4 98.1 121.4
6.3 7.7 9862 1.85 231.17 100.8 122.5 100.8 122.5
6.5 7.9 9588 1.90 225.22 101.2 122.7 101.2 122.7
7.5 9.1 8191 2.20 194.80 103.4 123.8 103.4 123.8
3.8 4.6 17145 0.80 384.88 ** ** ** **
3.9 4.7 16930 0.80 380.06 ** ** ** **
4.4 5.3 14703 0.90 331.43 64.2 82.8 64.2 82.8
K 4.5 5.4 14524 0.90 327.38 64.9 82.9 64.9 82.9
4.6 5.5 14124 0.95 319.02 66.5 83.3 66.5 83.3
4.8 5.8 13591 1.00 307.62 68.4 83.9 68.4 83.9
5.2 6.2 12510 1.05 283.73 72.0 85.0 72.0 85.0
5.3 6.4 12239 1.10 278.15 72.8 85.2 72.8 85.2
5.5 6.6 11778 1.15 268.22 74.2 85.7 74.2 85.7 KH124-11P-L132M-04F 471 486
5.6 6.7 11540 1.15 262.80 74.9 85.9 74.9 85.9
6.0 7.2 10685 1.25 244.33 77.1 86.8 77.1 86.8
6.1 7.4 10477 1.25 239.59 77.6 87.0 77.6 87.0
6.3 7.7 10083 1.30 231.04 78.5 87.4 78.5 87.4
6.4 7.7 9979 1.35 229.14 78.8 87.5 78.8 87.5
7.1 8.6 8930 1.50 206.32 81.0 88.5 81.0 88.5
7.4 8.9 8593 1.55 198.95 81.6 88.9 81.6 88.9
8.6 10 7266 1.80 169.97 83.9 90.2 83.9 90.2
9.7 12 7388 1.80 151.11 83.7 90.1 83.7 90.1
11 13 6442 2.05 131.76 85.1 91.0 85.1 91.0
12 14 6212 2.10 127.05 85.4 91.3 85.4 91.3
13 16 5549 2.35 113.49 86.2 91.9 86.2 91.9 KH123-11P-L132M-04F 447 484
15 18 4778 2.75 97.73 87.0 92.7 87.0 92.7
30 36 2403 2.50 49.16 88.7 95.1 88.7 95.1
52 63 1370 2.50 28.03 87.3 95.8 87.3 95.8
6.3 7.6 10398 0.80 233.43 ** ** ** **
6.4 7.8 10163 0.80 228.15 ** ** ** **
6.7 8.0 9780 0.85 220.00 35.1 58.0 35.1 58.0
6.8 8.2 9625 0.85 216.51 36.3 58.2 36.3 58.2
KH104-11P-L132M-04F 348 482
7.4 9.0 8727 0.95 197.12 42.0 59.2 42.0 59.2
7.7 9.3 8398 1.00 190.08 43.8 59.6 43.8 59.6
7.8 9.4 8304 1.00 187.95 44.3 59.7 44.3 59.7
9.0 11 7131 1.15 162.39 49.5 61.0 49.5 61.0
10 13 6891 1.20 140.95 50.4 61.3 50.4 61.3
12 14 6087 1.35 124.50 53.2 62.2 53.2 62.2
14 16 5284 1.55 108.07 55.5 63.1 55.5 63.1
16 19 4565 1.80 93.37 57.2 64.0 57.2 64.0
18 22 3906 2.05 79.90 58.5 64.7 58.5 64.7
KH103-11P-L132M-04F 324 480
21 26 3374 2.40 69.01 59.4 65.3 59.4 65.3
28 33 2604 2.30 53.27 60.4 66.2 60.4 66.2
37 45 1925 2.50 39.38 61.1 67.0 61.1 67.0
48 58 1483 2.30 30.33 61.1 67.1 61.1 67.1
65 79 1096 2.50 22.42 55.1 67.6 55.1 67.6

Legend see page 363 ** ... on request

404 WG20 Gear Units and Geared Motors www.weg.net

 PN = 7.5 kW IE3
50 Hz 60 Hz at 50 Hz

7.5 kW 9.0 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
13 16 5363 0.85 109.70 21.0 35.2 21.0 35.2
15 19 4640 1.00 94.90 27.0 39.1 27.0 39.1
16 19 4474 1.05 91.51 28.1 39.3 28.1 39.3
18 22 3947 1.15 80.74 31.1 40.0 31.1 40.0
21 26 3359 1.35 68.71 33.8 40.7 33.8 40.7
23 28 3127 1.45 63.96 34.7 41.0 34.7 41.0
25 30 2898 1.60 59.28 35.4 41.3 35.4 41.3
27 33 2644 1.75 54.07 36.2 41.6 36.2 41.6
31 38 2289 2.00 46.81 37.2 42.1 37.2 42.1
KH093-11P-L132M-04F 206 476
35 43 2027 2.25 41.46 37.8 42.4 37.8 42.4
39 48 1815 1.55 37.13 38.2 41.8 38.2 41.8
41 49 1753 2.60 35.86 38.3 42.8 38.3 42.8
42 51 1691 2.50 34.58 38.5 42.9 38.5 42.9
47 56 1535 1.85 31.39 38.7 42.3 38.7 42.3
54 65 1329 2.15 27.18 39.0 42.7 39.0 42.7
61 74 1177 2.55 24.07 39.2 42.9 39.2 42.9
70 85 1018 2.95 20.82 39.4 43.2 39.4 43.2
73 88 982 2.50 20.08 39.4 43.3 39.4 43.3
18 22 3906 0.80 79.89 ** ** ** ** K
21 26 3346 0.90 68.44 16.0 27.1 16.0 7.6
22 27 3227 0.95 66.00 17.3 29.8 17.3 7.7
23 28 3086 0.95 63.12 18.6 32.6 18.6 7.9
25 30 2848 1.10 58.25 20.6 37.0 20.6 8.3
27 32 2694 1.15 55.11 21.7 39.4 21.7 8.5
30 36 2381 1.30 48.71 23.6 41.5 23.6 9.0
36 43 2013 1.50 41.18 25.4 42.0 22.9 9.5
36 43 2014 1.50 41.19 25.4 42.0 22.9 9.5
41 49 1760 0.95 35.99 26.4 41.5 22.0 9.0
47 56 1537 1.25 31.43 27.2 41.9 20.5 9.4
KH083-11P-L132M-04F 156 472
47 57 1511 2.00 30.91 27.2 42.8 19.8 10.3
53 64 1358 1.40 27.78 27.7 42.3 19.2 9.8
55 67 1295 2.30 26.48 27.8 43.1 18.3 10.6
57 69 1249 2.40 25.54 28.0 43.2 18.0 10.7
62 75 1148 1.70 23.49 28.2 42.7 17.7 10.2
65 79 1102 2.60 22.54 28.3 43.4 16.9 10.9
73 88 987 1.95 20.19 28.5 43.0 16.3 10.5
77 94 925 2.95 18.91 28.6 43.6 15.5 11.1
83 100 862 2.25 17.63 28.7 43.3 15.3 10.8
97 117 738 2.65 15.10 28.9 43.5 14.3 11.0
101 122 712 2.50 14.56 29.0 43.6 14.0 11.1
37 45 1915 0.85 39.17 11.4 15.0 11.4 3.8
45 55 1584 1.00 32.40 14.9 15.7 13.3 4.5
53 64 1347 1.20 27.56 16.6 16.2 13.4 5.0
61 73 1182 0.80 24.17 ** ** ** **
73 88 986 1.60 20.17 18.5 17.0 12.7 5.7
75 91 951 1.65 19.45 18.7 17.0 12.5 5.8
79 95 912 1.00 18.65 18.8 16.2 12.3 4.9
KH073-11P-L132M-04F 115 470
88 107 812 1.95 16.61 19.2 17.3 11.5 6.1
95 115 754 1.25 15.43 19.3 16.6 11.5 5.4
112 135 641 1.45 13.12 19.7 17.0 10.6 5.7
129 156 556 1.65 11.37 19.9 17.3 9.8 6.0
153 184 469 1.95 9.60 20.0 17.5 9.0 6.3
158 191 453 2.05 9.26 20.1 17.6 8.8 6.3
185 224 387 2.40 7.91 20.2 17.8 8.2 6.5

Legend see page 363 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 405

 PN = 7.5 kW IE3
50 Hz 60 Hz at 50 Hz

7.5 kW 9.0 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
73 89 978 0.80 20.00 ** ** ** **
89 108 802 0.90 16.40 8.8 12.7 8.8 2.8
105 127 682 1.00 13.94 9.9 13.1 9.2 3.2
111 134 645 0.80 13.19 ** ** ** **
128 154 560 1.15 11.46 10.8 13.5 9.0 3.5
133 160 540 1.15 11.05 10.9 13.5 8.8 3.6
135 163 532 0.95 10.88 11.0 12.9 8.6 2.9 KH063-11P-L132M-04F 95 468
161 195 444 1.35 9.09 11.5 13.9 7.9 3.9
164 198 436 1.15 8.92 11.5 13.3 8.1 3.4
193 234 371 1.35 7.58 11.8 13.6 7.4 3.6
235 284 305 1.55 6.23 12.0 13.9 6.7 3.9
244 295 294 1.55 6.01 12.0 13.9 6.6 4.0
297 358 242 1.80 4.94 12.2 14.2 6.0 4.2
90 109 792 0.80 16.19 ** ** ** **
107 129 672 0.90 13.75 4.7 7.4 4.7 3.3
130 156 553 1.10 11.31 6.8 10.3 6.8 3.6
134 162 533 1.15 10.91 7.0 10.4 7.0 3.7
156 188 460 0.90 9.40 7.8 9.9 7.8 3.2
K 163 197 439 1.30 8.97 8.0 10.7 8.0 4.0 KH053-11P-L132M-04F 82 466
190 230 377 1.10 7.71 8.5 10.3 8.5 3.6
224 270 320 1.30 6.55 8.9 10.6 8.3 3.9
272 328 264 1.60 5.39 9.2 10.8 7.5 4.1
282 341 254 1.65 5.19 9.2 10.9 7.4 4.2
343 415 209 2.00 4.27 9.0 11.1 6.7 4.4

Legend see page 363 ** ... on request

406 WG20 Gear Units and Geared Motors www.weg.net

 PN = 9.2 kW IE3
50 Hz 60 Hz at 50 Hz

9.2 kW 11 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
3.4 4.1 23831 0.80 434.63 ** ** ** **
3.5 4.2 22980 0.80 419.11 ** ** ** **
3.9 4.7 20637 0.90 377.93 65.5 114.3 65.5 114.3
4.0 4.9 19671 0.95 360.98 70.6 115.0 70.6 115.0
4.5 5.5 17572 1.05 323.79 79.9 116.6 79.9 116.6
4.6 5.5 17291 1.05 318.60 81.0 116.8 81.0 116.8
4.7 5.7 16910 1.10 312.23 82.4 117.1 82.4 117.1 KH154-11P-L132M-04G 730 490
5.3 6.4 14834 1.25 275.58 89.2 118.7 89.2 118.7
5.5 6.6 14356 1.30 267.26 90.6 119.0 90.6 119.0
5.6 6.7 14046 1.30 261.49 91.5 119.3 91.5 119.3
6.3 7.6 12316 1.50 231.17 95.8 120.6 95.8 120.6
6.5 7.8 11974 1.55 225.22 96.6 120.9 96.6 120.9
7.5 9.1 10250 1.80 194.80 100.1 122.2 100.1 122.2
4.7 5.7 16867 0.80 307.62 ** ** ** **
5.1 6.2 15525 0.85 283.73 60.7 81.9 60.7 81.9
5.2 6.3 15426 0.85 281.92 61.1 82.0 61.1 82.0
5.4 6.6 14646 0.90 268.22 64.4 82.8 64.4 82.8
5.6 6.7 14321 0.95 262.80 65.7 83.1 65.7 83.1
6.0 7.2 13287 1.00 244.33 69.5 84.2 69.5 84.2 K
6.1 7.4 13029 1.00 239.59 70.4 84.4 70.4 84.4 KH124-11P-L132M-04G 476 486
6.3 7.6 12539 1.05 231.04 71.9 84.9 71.9 84.9
6.4 7.7 12436 1.05 229.14 72.3 85.0 72.3 85.0
7.1 8.6 11128 1.20 206.32 76.0 86.3 76.0 86.3
7.3 8.9 10709 1.25 198.95 77.0 86.8 77.0 86.8
7.4 8.9 10624 1.25 197.38 77.2 86.9 77.2 86.9
8.6 10 9074 1.45 169.97 80.7 88.4 80.7 88.4
9.7 12 9094 1.45 151.11 80.6 88.4 80.6 88.4
11 13 7929 1.65 131.76 82.8 89.6 82.8 89.6
13 16 6830 1.95 113.49 84.5 90.7 84.5 90.7
15 18 5881 2.25 97.73 85.8 91.6 85.8 91.6
17 21 5137 2.55 85.37 86.6 92.4 86.6 92.4 KH123-11P-L132M-04G 452 484
25 30 3519 2.50 58.47 88.1 94.0 88.1 94.0
30 36 2958 2.00 49.16 88.4 94.5 88.4 94.5
44 53 2006 2.50 33.34 88.9 95.0 88.9 95.0
52 63 1687 2.00 28.03 88.1 95.4 88.1 95.4
7.7 9.3 10422 0.80 190.08 ** ** ** **
7.8 9.4 10305 0.80 187.95 ** ** ** ** KH104-11P-L132M-04G 353 482
9.0 11 8849 0.95 162.39 41.3 59.1 41.3 59.1
10 13 8482 0.95 140.95 43.3 59.5 43.3 59.5
12 14 7492 1.10 124.50 48.0 60.6 48.0 60.6
14 16 6503 1.25 108.07 51.8 61.7 51.8 61.7
16 19 5619 1.45 93.37 54.6 62.7 54.6 62.7
18 22 4808 1.70 79.90 56.6 63.7 56.6 63.7
21 26 4153 1.95 69.01 58.0 64.4 58.0 64.4
KH103-11P-L132M-04G 329 480
27 33 3206 1.90 53.27 59.6 65.5 59.6 65.5
31 38 2831 2.65 47.05 60.1 65.9 60.1 65.9
37 45 2370 2.00 39.38 60.7 66.5 60.7 66.5
48 58 1825 1.90 30.33 61.2 66.6 61.2 66.6
54 66 1612 2.65 26.79 59.4 66.9 59.4 66.9
65 79 1349 2.00 22.42 55.7 67.3 55.7 67.3

Legend see page 363 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 407

 PN = 9.2 kW IE3
50 Hz 60 Hz at 50 Hz

9.2 kW 11 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
15 19 5711 0.80 94.90 ** ** ** **
16 19 5507 0.85 91.51 19.4 31.8 19.4 31.8
18 22 4859 0.95 80.74 25.4 38.8 25.4 38.8
21 26 4135 1.10 68.71 30.1 39.7 30.1 39.7
23 28 3849 1.20 63.96 31.6 40.1 31.6 40.1
25 30 3567 1.30 59.28 32.9 40.5 32.9 40.5
27 33 3254 1.40 54.07 34.2 40.9 34.2 40.9
31 38 2817 1.60 46.81 35.7 41.4 35.7 41.4
35 43 2495 1.85 41.46 36.7 41.8 36.7 41.8
39 48 2234 1.25 37.13 37.3 41.1 37.3 41.1
KH093-11P-L132M-04G 211 476
41 49 2158 2.10 35.86 37.5 42.3 37.5 42.3
42 51 2081 2.00 34.58 37.7 42.4 37.7 42.4
47 56 1889 1.50 31.39 38.1 41.7 38.1 41.7
48 58 1836 2.50 30.51 38.2 42.7 38.2 42.7
54 65 1636 1.75 27.18 38.6 42.2 38.6 42.2
56 68 1563 2.90 25.97 38.7 43.0 38.7 43.0
61 73 1448 2.10 24.07 38.9 42.5 38.9 42.5
70 85 1253 2.40 20.82 39.1 42.8 39.1 42.8
K 73 88 1208 2.00 20.08 39.2 42.9 39.2 42.9
82 100 1066 2.85 17.72 39.3 43.1 39.3 43.1
22 27 3972 0.80 66.00 ** ** ** **
23 28 3798 0.80 63.12 ** ** ** **
25 30 3505 0.90 58.25 14.0 22.8 14.0 7.3
26 32 3316 0.95 55.11 16.3 27.7 16.3 7.6
30 36 2941 1.05 48.87 19.9 35.5 19.9 8.2
35 43 2479 1.25 41.19 23.0 41.3 23.0 8.8
41 49 2166 0.80 35.99 ** ** ** **
46 56 1891 1.05 31.43 25.9 41.2 21.9 8.7
47 57 1860 1.65 30.91 26.0 42.3 21.0 9.8
53 64 1672 1.15 27.78 26.7 41.6 20.4 9.1
55 67 1594 1.90 26.48 27.0 42.6 19.3 10.1
KH083-11P-L132M-04G 161 472
57 69 1537 1.95 25.54 27.2 42.7 19.0 10.2
62 75 1414 1.40 23.49 27.5 42.2 18.7 9.7
65 78 1356 2.10 22.54 27.7 43.0 17.8 10.5
72 87 1215 1.60 20.19 28.0 42.6 17.3 10.1
77 93 1138 2.40 18.91 28.2 43.3 16.3 10.8
83 100 1061 1.85 17.63 28.4 42.9 16.1 10.4
92 111 959 2.70 15.93 28.6 43.6 14.9 11.1
97 117 909 2.15 15.10 28.7 43.2 14.9 10.7
100 121 876 2.00 14.56 28.7 43.2 14.7 10.7
114 137 773 2.55 12.85 28.9 43.4 13.8 10.9
135 164 649 3.00 10.78 29.0 43.7 12.7 11.2
45 54 1950 0.80 32.40 ** ** ** **
53 64 1659 0.95 27.56 14.2 15.6 11.8 4.3
61 74 1437 1.10 23.88 16.0 16.0 12.0 4.8
72 88 1214 1.30 20.17 17.4 16.5 12.1 5.2
75 91 1170 1.35 19.45 17.6 16.6 12.1 5.3
78 95 1122 0.85 18.65 17.9 15.5 11.2 4.2
88 106 1000 1.60 16.61 18.5 16.9 12.0 5.7 KH073-11P-L132M-04G 120 470
95 114 929 1.00 15.43 18.7 16.1 11.2 4.8
111 135 790 1.20 13.12 19.2 16.5 11.2 5.3
128 155 684 1.35 11.37 19.6 16.9 10.4 5.6
152 184 578 1.60 9.60 19.8 17.2 9.5 5.9
158 191 557 1.65 9.26 19.9 17.3 9.3 6.0
185 223 476 1.95 7.91 20.0 17.5 8.6 6.3

Legend see page 363 ** ... on request

408 WG20 Gear Units and Geared Motors www.weg.net

 PN = 9.2 kW IE3
50 Hz 60 Hz at 50 Hz

9.2 kW 11 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
105 127 839 0.80 13.94 ** ** ** **
127 154 690 0.95 11.46 9.9 13.1 8.3 3.1
132 160 665 0.95 11.05 10.1 13.2 8.3 3.2
134 162 655 0.80 10.88 ** ** ** **
161 194 547 1.10 9.09 10.9 13.5 8.2 3.6
KH063-11P-L132M-04G 100 468
164 198 537 0.95 8.92 11.0 12.9 7.8 2.9
193 233 456 1.10 7.58 11.4 13.2 7.8 3.3
234 283 375 1.25 6.23 11.8 13.6 7.1 3.6
243 294 362 1.30 6.01 11.8 13.6 7.0 3.7
296 357 297 1.45 4.94 12 13.9 6.3 4.0
129 156 681 0.90 11.31 4.5 6.9 4.5 3.2
134 162 657 0.95 10.91 5.1 8.2 5.1 3.3
163 197 540 1.05 8.97 6.9 10.4 6.9 3.7
189 229 464 0.90 7.71 7.8 9.9 7.8 3.2
KH053-11P-L132M-04G 87 466
223 269 394 1.05 6.55 8.4 10.2 8.4 3.5
271 327 324 1.30 5.39 8.8 10.5 8.0 3.8
281 340 312 1.35 5.19 8.9 10.6 7.8 3.9
342 413 257 1.65 4.27 9.2 10.8 7.1 4.1
K

Legend see page 363 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 409

 PN = 11 kW IE3
50 Hz 60 Hz at 50 Hz

11 kW 13 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
4.5 5.5 20996 0.90 323.79 63.4 110.8 63.4 110.8
4.6 5.6 20660 0.90 318.60 65.4 114.2 65.4 114.2
4.7 5.7 20121 0.90 310.30 68.3 114.6 68.3 114.6
5.3 6.4 17760 1.05 275.58 79.1 116.4 79.1 116.4
5.5 6.6 17224 1.05 267.26 81.2 116.9 81.2 116.9
5.6 6.8 16818 1.10 261.49 82.7 117.2 82.7 117.2
KH154-22P-160M-04E 792 490
6.4 7.7 14776 1.25 231.17 89.4 118.7 89.4 118.7
6.5 7.9 14366 1.30 225.22 90.6 119.0 90.6 119.0
6.9 8.3 13648 1.35 214.39 92.6 119.6 92.6 119.6
7.5 9.1 12324 1.50 194.80 95.8 120.6 95.8 120.6
8.0 9.6 11658 1.55 184.65 97.3 121.1 97.3 121.1
9.2 11 9960 1.85 159.72 100.6 122.4 100.6 122.4
10 12 10483 1.75 146.69 99.6 122.0 99.6 122.0
12 14 9029 2.00 126.34 102.1 123.1 102.1 123.1
13 16 7809 2.35 109.28 103.9 124.0 103.9 124.0
KH153-22P-160M-04E 746 488
15 18 6888 2.65 96.39 105.1 124.7 105.1 124.7
26 31 4056 2.70 56.75 107.7 126.9 107.7 126.9
41 50 2546 2.70 35.63 108.5 127.4 108.5 127.4
K 5.6 6.8 17111 0.80 262.80 ** ** ** **
6.0 7.3 15876 0.85 244.33 59 81.6 59 81.6
6.1 7.4 15568 0.85 239.59 60.5 81.9 60.5 81.9
6.4 7.7 14859 0.90 229.14 63.6 82.6 63.6 82.6 KH124-22P-160M-04E 538 486
7.1 8.6 13324 1.00 206.32 69.4 84.1 69.4 84.1
7.4 9.0 12721 1.05 197.38 71.4 84.8 71.4 84.8
8.6 10 10887 1.20 169.97 76.6 86.6 76.6 86.6
9.7 12 10799 1.25 151.11 76.8 86.7 76.8 86.7
11 13 9416 1.40 131.76 80.0 88.1 80.0 88.1
13 16 8110 1.65 113.49 82.5 89.4 82.5 89.4
15 18 6984 1.90 97.73 84.3 90.5 84.3 90.5
17 21 6101 2.15 85.37 85.5 91.4 85.5 91.4
20 24 5270 2.50 73.74 86.5 92.2 86.5 92.2 KH123-22P-160M-04E 514 484
24 29 4358 3.00 60.98 87.4 93.1 87.4 93.1
25 30 4178 2.10 58.47 87.6 93.3 87.6 93.3
29 35 3643 2.70 50.98 88.0 93.8 88.0 93.8
44 53 2383 2.10 33.34 88.8 94.6 88.8 94.6
51 61 2077 2.70 29.07 88.9 94.9 88.9 94.9
9.1 11 10573 0.80 162.39 ** ** ** ** KH104-22P-160M-04E 415 482
12 14 8897 0.90 124.50 41.0 59.0 41.0 59.0
14 16 7723 1.05 108.07 47.0 60.3 47.0 60.3
16 19 6672 1.20 93.37 51.2 61.5 51.2 61.5
18 22 5710 1.45 79.90 54.3 62.6 54.3 62.6
21 26 4932 1.65 69.01 56.3 63.5 56.3 63.5
25 30 4171 1.95 58.36 58.0 64.4 58.0 64.4
31 37 3403 2.40 47.62 59.3 65.3 59.3 65.3 KH103-22P-160M-04E 391 480
36 43 2919 2.60 40.84 60.0 65.8 60.0 65.8
38 46 2761 2.90 38.64 60.2 66.0 60.2 66.0
42 50 2522 3.00 35.29 60.5 66.3 60.5 66.3
55 66 1914 2.25 26.79 59.9 66.5 59.9 66.5
63 76 1662 2.60 23.25 57.1 66.8 57.1 66.8
73 88 1436 3.00 20.09 54.2 67.2 54.2 67.2
18 22 5770 0.80 80.74 ** ** ** **
21 26 4910 0.95 68.71 25.0 38.8 25.0 38.8
25 30 4236 1.10 59.28 29.6 39.6 29.6 39.6
30 36 3554 1.30 49.73 33.0 40.5 33.0 40.5
35 43 2963 1.55 41.46 35.2 41.2 35.2 41.2
36 44 2889 1.60 40.43 35.5 41.3 35.5 41.3
41 49 2563 1.80 35.86 36.5 41.7 36.5 41.7
47 56 2259 2.00 31.61 37.3 42.1 37.3 42.1 KH093-22P-160M-04E 273 476
48 58 2180 2.10 30.51 37.5 42.2 37.5 42.2
57 68 1856 2.45 25.97 38.2 42.6 38.2 42.6
61 74 1720 1.75 24.07 38.4 42.0 38.4 42.0
66 79 1601 2.85 22.40 38.6 43.0 38.6 43.0
71 85 1488 2.05 20.82 38.8 42.4 38.8 42.4
83 100 1266 2.40 17.72 39.1 42.8 39.1 42.8
97 118 1078 2.80 15.08 39.3 43.1 39.3 43.1

410 WG20 Gear Units and Geared Motors www.weg.net

 PN = 11 kW IE3
50 Hz 60 Hz at 50 Hz

11 kW 13 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
30 36 3492 0.90 48.87 14.2 23.2 14.2 7.3
36 43 2943 1.05 41.18 19.8 35.3 19.8 8.2
44 53 2413 1.25 33.76 23.4 41.4 22.4 8.9
48 57 2209 1.40 30.91 24.5 41.7 22.1 9.2
56 67 1892 1.60 26.48 25.9 42.2 20.3 9.7
65 79 1611 1.80 22.54 26.9 42.6 18.6 10.1
78 94 1351 2.00 18.91 27.7 43.0 17.0 10.5
KH083-22P-160M-04E 223 472
83 101 1260 1.55 17.63 27.9 42.5 16.9 10.0
92 111 1138 2.25 15.93 28.2 43.3 15.6 10.8
97 118 1079 1.80 15.10 28.3 42.8 15.6 10.3
113 136 933 2.60 13.06 28.6 43.6 14.1 11.1
114 138 918 2.15 12.85 28.6 43.2 14.4 10.7
136 165 770 2.55 10.78 28.9 43.5 13.2 11.0
162 195 650 3.00 9.09 29.0 43.7 12.1 11.2
62 74 1707 0.95 23.88 13.8 15.5 10.5 4.2
73 88 1441 1.10 20.17 16.0 16.0 10.8 4.8
89 107 1187 1.35 16.61 17.6 16.5 11.0 5.3
KH073-22P-160M-04E 182 470
129 156 813 1.15 11.37 19.2 16.5 10.3 5.2
153 185 686 1.35 9.60 19.5 16.9 10.0 5.6 K
186 224 565 1.65 7.91 19.8 17.2 9.0 6.0

Legend see page 363

www.weg.net WG20 Gear Units and Geared Motors 411

 PN = 15 kW IE3
50 Hz 60 Hz at 50 Hz

15 kW 18 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
5.5 6.6 23811 0.80 267.26 ** ** ** **
5.6 6.8 23296 0.80 261.49 ** ** ** **
6.3 7.7 20511 0.90 231.17 66.2 114.3 66.2 114.3
6.5 7.9 19942 0.95 225.22 69.2 114.8 69.2 114.8
KH154-22P-160L-04F 815 490
6.8 8.3 18983 0.95 214.39 73.9 115.5 73.9 115.5
7.5 9.1 17178 1.05 194.80 81.4 116.9 81.4 116.9
7.9 9.6 16216 1.15 184.65 84.8 117.6 84.8 117.6
9.2 11 13941 1.30 159.72 91.8 119.4 91.8 119.4
10 12 14344 1.30 146.69 90.7 119.1 90.7 119.1
12 14 12354 1.50 126.34 95.7 120.6 95.7 120.6
13 16 10686 1.70 109.28 99.3 121.8 99.3 121.8
15 18 9425 1.95 96.39 101.5 122.8 101.5 122.8
18 21 8095 2.25 82.79 103.5 123.8 103.5 123.8
KH153-22P-160L-04F 769 488
21 26 6735 2.70 68.88 105.3 124.9 105.3 124.9
26 31 5549 1.95 56.75 106.5 125.8 106.5 125.8
30 36 4780 3.00 48.88 107.1 126.4 107.1 126.4
41 50 3484 1.95 35.63 108.0 126.4 108.0 126.4
48 58 3001 3.00 30.69 108.3 126.9 108.3 126.9
K 8.6 10 15081 0.90 169.97 62.6 82.4 62.6 82.4 KH124-22P-160L-04F 561 486
9.7 12 14776 0.90 151.11 63.9 82.7 63.9 82.7
11 13 12884 1.05 131.76 70.8 84.6 70.8 84.6
13 16 11097 1.20 113.49 76.0 86.4 76.0 86.4
15 18 9556 1.40 97.73 79.7 87.9 79.7 87.9
17 21 8348 1.60 85.37 82.1 89.1 82.1 89.1
20 24 7210 1.85 73.74 84.0 90.3 84.0 90.3
24 29 5963 2.20 60.98 85.7 91.5 85.7 91.5 KH123-22P-160L-04F 537 484
25 30 5717 1.55 58.47 86.0 91.8 86.0 91.8
29 35 4985 1.95 50.98 86.8 92.5 86.8 92.5
33 40 4294 3.00 43.91 87.5 93.2 87.5 93.2
44 53 3260 1.55 33.34 88.3 93.5 88.3 93.5
50 61 2843 1.95 29.07 88.5 94.0 88.5 94.0
59 71 2448 3.00 25.04 86.8 94.5 86.8 94.5
14 16 10567 0.80 108.07 ** ** ** **
16 19 9130 0.90 93.37 39.6 58.7 39.6 58.7
18 22 7813 1.05 79.90 46.6 60.2 46.6 60.2
21 26 6748 1.20 69.01 51.0 61.5 51.0 61.5
25 30 5707 1.45 58.36 54.3 62.6 54.3 62.6
31 37 4656 1.75 47.62 57.0 63.8 57.0 63.8
36 43 3993 1.90 40.84 58.3 64.6 58.3 64.6
38 46 3778 2.15 38.64 58.7 64.9 58.7 64.9
KH103-22P-160L-04F 414 480
42 50 3451 2.20 35.29 59.3 65.2 59.3 65.2
49 59 2953 2.55 30.20 60.0 65.8 60.0 65.8
55 66 2620 1.65 26.79 60.4 65.5 60.4 65.5
56 68 2550 2.95 26.08 60.5 66.3 60.5 66.3
63 76 2273 1.90 23.25 58.7 66.0 58.7 66.0
73 88 1964 2.20 20.09 55.6 66.4 55.6 66.4
85 103 1681 2.55 17.19 52.6 66.8 52.6 66.8
99 120 1452 2.95 14.85 49.8 67.1 49.8 67.1
25 30 5796 0.80 59.28 ** ** ** **
29 36 4863 0.95 49.73 25.4 38.8 25.4 38.8
35 43 4054 1.15 41.46 30.6 39.8 30.6 39.8
36 44 3953 1.15 40.43 31.1 40.0 31.1 40.0
41 49 3506 1.30 35.86 33.2 40.5 33.2 40.5
46 56 3091 1.50 31.61 34.8 41.1 34.8 41.1
48 58 2983 1.55 30.51 35.2 41.2 35.2 41.2
56 68 2539 1.80 25.97 36.5 41.8 36.5 41.8
KH093-22P-160L-04F 296 476
61 74 2354 1.30 24.07 37.0 40.9 37.0 40.9
65 79 2190 2.10 22.40 37.4 42.2 37.4 42.2
70 85 2036 1.50 20.82 37.8 41.5 37.8 41.5
78 94 1837 2.45 18.79 38.2 42.7 38.2 42.7
83 100 1733 1.75 17.72 38.4 42.0 38.4 42.0
97 118 1475 2.05 15.08 38.8 42.4 38.8 42.4
113 136 1272 2.40 13.01 39.1 42.8 39.1 42.8
134 163 1067 2.85 10.91 36.7 43.1 36.7 43.1

412 WG20 Gear Units and Geared Motors www.weg.net

 PN = 15 kW IE3
50 Hz 60 Hz at 50 Hz

15 kW 18 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
43 53 3301 0.95 33.76 16.5 28.1 16.5 7.6
47 57 3022 1.00 30.91 19.2 33.9 19.1 8.0
55 67 2589 1.15 26.48 22.4 41.0 19.3 8.7
65 79 2204 1.30 22.54 24.5 41.7 19.3 9.2
77 94 1849 1.50 18.91 26.1 42.3 18.8 9.8
83 101 1724 1.15 17.63 26.5 41.5 18.3 9.0
92 111 1558 1.65 15.93 27.1 42.7 17.0 10.2 KH083-22P-160L-04F 246 472
97 118 1477 1.35 15.10 27.3 42.0 17.1 9.5
112 136 1277 1.90 13.06 27.9 43.1 15.3 10.6
114 138 1256 1.55 12.85 27.9 42.5 15.7 10.0
136 165 1054 1.85 10.78 28.4 42.9 14.3 10.4
161 195 889 2.20 9.09 28.7 43.2 13.1 10.7
197 238 728 2.70 7.45 28.9 43.5 11.8 11.0
73 88 1972 0.80 20.17 ** ** ** **
88 107 1624 1.00 16.61 14.5 15.6 8.8 4.4
129 156 1112 0.85 11.37 17.9 15.5 8.5 4.3 KH073-22P-160L-04F 205 470
153 185 939 1.00 9.60 18.7 16.1 8.7 4.8
185 224 773 1.20 7.91 19.3 16.6 8.8 5.3
K

Legend see page 363 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 413

 PN = 18.5 kW IE3
50 Hz 60 Hz at 50 Hz

18.5 kW 22 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
6.9 8.3 23477 0.80 214.39 ** ** ** **
7.5 9.1 21288 0.85 194.80 61.7 107.2 61.7 107.2
KH154-22P-180M-04E 829 490
8.0 9.6 20138 0.90 184.65 68.2 114.6 68.2 114.6
9.2 11 17312 1.05 159.72 80.9 116.8 80.9 116.8
10 12 17630 1.05 146.69 79.7 116.5 79.7 116.5
12 14 15184 1.20 126.34 88.2 118.4 88.2 118.4
13 16 13134 1.40 109.28 93.9 120.0 93.9 120.0
15 18 11585 1.60 96.39 97.4 121.2 97.4 121.2
18 21 9950 1.85 82.79 100.6 122.4 100.6 122.4
21 26 8278 2.20 68.88 103.3 123.7 103.3 123.7 KH153-22P-180M-04E 783 488
26 31 6821 1.60 56.75 105.2 124.8 105.2 124.8
26 31 6869 2.65 57.15 105.1 124.8 105.1 124.8
30 36 5875 2.45 48.88 106.2 125.5 106.2 125.5
41 50 4282 1.60 35.63 107.5 125.6 107.5 125.6
48 58 3689 2.45 30.69 107.9 126.2 107.9 126.2
11 13 15836 0.85 131.76 59.2 81.6 59.2 81.6
13 16 13640 1.00 113.49 68.3 83.8 68.3 83.8
15 18 11746 1.15 97.73 74.3 85.7 74.3 85.7
K 17 21 10260 1.30 85.37 78.1 87.2 78.1 87.2
20 24 8863 1.50 73.74 81.1 88.6 81.1 88.6
24 29 7329 1.80 60.98 83.8 90.2 83.8 90.2
KH123-22P-180M-04E 551 484
29 35 6127 1.60 50.98 85.5 91.4 85.5 91.4
33 40 5277 2.45 43.91 86.5 92.2 86.5 92.2
36 43 4958 2.65 41.25 86.8 92.5 86.8 92.5
39 47 4544 2.90 37.81 87.2 92.9 87.2 92.9
51 61 3494 1.60 29.07 88.1 93.2 88.1 93.2
59 71 3009 2.45 25.04 88.2 93.8 88.2 93.8
18 22 9603 0.85 79.90 36.4 58.2 36.4 58.2
21 26 8294 1.00 69.01 44.3 59.7 44.3 59.7
25 30 7014 1.15 58.36 50.0 61.2 50.0 61.2
31 37 5723 1.40 47.62 54.3 62.6 54.3 62.6
36 43 4908 1.55 40.84 56.4 63.6 56.4 63.6
38 46 4644 1.75 38.64 57.0 63.9 57.0 63.9
42 50 4241 1.80 35.29 57.9 64.3 57.9 64.3
48 58 3708 2.20 30.85 58.8 64.9 58.8 64.9
KH103-22P-180M-04E 428 480
49 59 3630 2.10 30.20 59.0 65.0 59.0 65.0
56 68 3134 2.40 26.08 59.7 65.6 59.7 65.6
63 76 2794 1.55 23.25 60.1 65.2 60.1 65.2
67 80 2650 2.85 22.05 58.0 66.1 58.0 66.1
73 88 2415 1.80 20.09 56.8 65.8 56.8 65.8
86 103 2066 2.10 17.19 53.5 66.3 53.5 66.3
99 120 1785 2.40 14.85 50.7 66.7 50.7 66.7
117 141 1510 2.85 12.56 47.8 67.0 47.8 67.0
30 36 5977 0.80 49.73 ** ** ** **
36 44 4859 0.95 40.43 25.4 38.8 25.4 38.8
41 49 4310 1.05 35.86 29.1 39.5 29.1 39.5
47 56 3799 1.20 31.61 31.9 40.2 31.9 40.2
48 58 3667 1.25 30.51 32.5 40.3 32.5 40.3
57 68 3121 1.45 25.97 34.7 41.0 34.7 41.0
66 79 2692 1.70 22.40 36.1 41.6 36.1 41.6
71 85 2502 1.20 20.82 36.6 40.6 36.6 40.6 KH093-22P-180M-04E 310 476
78 94 2258 2.00 18.79 37.3 42.1 37.3 42.1
83 100 2130 1.45 17.72 37.6 41.3 37.6 41.3
96 116 1836 2.50 15.28 38.2 42.7 38.2 42.7
97 118 1812 1.70 15.08 38.2 41.8 38.2 41.8
113 136 1564 1.95 13.01 38.7 42.3 38.7 42.3
135 163 1311 2.30 10.91 37.5 42.7 37.5 42.7
166 200 1066 2.85 8.87 34.6 43.1 34.6 43.1

Legend see page 363 ** ... on request

414 WG20 Gear Units and Geared Motors www.weg.net

 PN = 18.5 kW IE3
50 Hz 60 Hz at 50 Hz

18.5 kW 22 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
56 67 3183 0.95 26.48 17.7 30.7 16.6 7.8
65 79 2709 1.05 22.54 21.6 39.2 17.2 8.5
78 94 2273 1.20 18.91 24.2 41.6 17.3 9.1
92 111 1915 1.35 15.93 25.8 42.2 17.4 9.7
97 118 1815 1.10 15.10 26.2 41.4 16.5 8.9
KH083-22P-180M-04E 260 472
113 136 1570 1.55 13.06 27.1 42.7 16.3 10.2
114 138 1544 1.30 12.85 27.1 41.9 16.4 9.4
136 165 1296 1.50 10.78 27.8 42.4 15.2 9.9
162 195 1093 1.80 9.09 28.3 42.8 13.8 10.3
197 238 895 2.20 7.45 28.7 43.2 12.5 10.7

Legend see page 363

www.weg.net WG20 Gear Units and Geared Motors 415

 PN = 22 kW IE3
50 Hz 60 Hz at 50 Hz

22 kW 26 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
9.2 11 20714 0.90 159.72 65.1 114.2 65.1 114.2 KH154-22P-180L-04F 850 490
10 12 20966 0.90 146.69 63.6 111.2 63.6 111.2
12 14 18057 1.00 126.34 77.9 116.2 77.9 116.2
13 16 15619 1.20 109.28 86.8 118.1 86.8 118.1
15 18 13777 1.35 96.39 92.2 119.5 92.2 119.5
18 21 11833 1.55 82.79 96.9 121.0 96.9 121.0
21 26 9845 1.85 68.88 100.8 122.5 100.8 122.5
26 31 8168 2.25 57.15 103.4 123.8 103.4 123.8 KH153-22P-180L-04F 804 488
30 36 6986 2.05 48.88 105.0 124.7 105.0 124.7
31 37 6812 2.65 47.66 105.2 124.8 105.2 124.8
35 42 6043 2.95 42.28 106.0 125.4 106.0 125.4
41 50 5092 1.35 35.63 106.9 124.7 106.9 124.7
48 58 4386 2.05 30.69 107.4 125.5 107.4 125.5
55 67 3793 2.95 26.54 107.8 126.1 107.8 126.1
13 16 16221 0.85 113.49 57.3 81.2 57.3 81.2
15 18 13968 0.95 97.73 67.1 83.5 67.1 83.5
17 21 12202 1.10 85.37 73.0 85.3 73.0 85.3
20 24 10539 1.25 73.74 77.4 86.9 77.4 86.9
K 24 29 8716 1.50 60.98 81.4 88.8 81.4 88.8
29 35 7286 1.35 50.98 83.9 90.2 83.9 90.2
33 40 6276 2.05 43.91 85.3 91.2 85.3 91.2
KH123-22P-180L-04F 572 484
36 43 5896 2.25 41.25 85.8 91.6 85.8 91.6
39 47 5404 2.45 37.81 86.4 92.1 86.4 92.1
42 51 5005 2.60 35.02 86.8 92.5 86.8 92.5
45 54 4721 2.80 33.03 87.1 92.8 87.1 92.8
51 61 4155 1.35 29.07 87.6 92.4 87.6 92.4
59 71 3579 2.05 25.04 88.0 93.1 88.0 93.1
68 82 3081 2.65 21.56 85.0 93.7 85.0 93.7
21 26 9863 0.85 69.01 34.5 57.7 34.5 57.7
25 30 8341 1.00 58.36 44.1 59.6 44.1 59.6
31 37 6806 1.20 47.62 50.8 61.4 50.8 61.4
36 43 5837 1.30 40.84 53.9 62.5 53.9 62.5
38 46 5523 1.45 38.64 54.8 62.9 54.8 62.9
42 50 5044 1.50 35.29 56.1 63.4 56.1 63.4
48 58 4409 1.85 30.85 57.5 64.1 57.5 64.1
49 59 4316 1.75 30.20 57.7 64.2 57.7 64.2
56 68 3727 2.05 26.08 58.8 64.9 58.8 64.9 KH103-22P-180L-04F 449 480
63 76 3323 1.30 23.25 59.5 64.5 59.5 64.5
67 80 3152 2.40 22.05 59.3 65.6 59.3 65.6
73 88 2871 1.50 20.09 58.1 65.1 58.1 65.1
82 99 2573 2.95 18.00 54.8 66.2 54.8 66.2
86 103 2457 1.75 17.19 54.5 65.7 54.5 65.7
99 120 2122 2.05 14.85 51.6 66.2 51.6 66.2
117 141 1795 2.40 12.56 48.5 66.6 48.5 66.6
143 173 1465 2.95 10.25 45.1 67.1 45.1 67.1
36 44 5778 0.80 40.43 ** ** ** **
41 49 5125 0.90 35.86 23.2 38.5 23.2 38.5
47 56 4518 1.00 31.61 27.8 39.3 27.8 39.3
48 58 4361 1.05 30.51 28.8 39.5 28.8 39.5
57 68 3712 1.25 25.97 32.3 40.3 32.3 40.3
66 79 3202 1.45 22.40 34.4 40.9 34.4 40.9
71 85 2976 1.05 20.82 35.2 39.8 35.2 39.8
78 94 2686 1.70 18.79 36.1 41.6 36.1 41.6 KH093-22P-180L-04F 331 476
83 100 2533 1.20 17.72 36.6 40.6 36.6 40.6
96 116 2184 2.10 15.28 37.4 42.2 37.4 42.2
97 118 2155 1.40 15.08 37.5 41.2 37.5 41.2
113 136 1859 1.65 13.01 38.1 41.8 38.1 41.8
123 149 1708 2.65 11.95 38.4 42.8 38.4 42.8
135 163 1559 1.95 10.91 38.4 42.3 38.4 42.3
166 200 1268 2.40 8.87 35.4 42.8 35.4 42.8

Legend see page 363 ** ... on request

416 WG20 Gear Units and Geared Motors www.weg.net

 PN = 22 kW IE3
50 Hz 60 Hz at 50 Hz

22 kW 26 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
56 67 3785 0.80 26.48 ** ** ** **
65 79 3222 0.90 22.54 17.3 29.8 15.0 7.7
78 94 2703 1.00 18.91 21.6 39.2 15.5 8.5
92 111 2277 1.15 15.93 24.2 41.6 15.8 9.1
97 118 2158 0.90 15.10 24.7 40.7 14.9 8.2
KH083-22P-180L-04F 281 472
113 136 1867 1.30 13.06 26.0 42.2 15.9 9.7
114 138 1837 1.10 12.85 26.1 41.3 15.1 8.8
136 165 1541 1.30 10.78 27.1 41.9 15.1 9.4
162 195 1299 1.50 9.09 27.8 42.4 14.6 9.9
197 238 1065 1.85 7.45 28.4 42.9 13.1 10.4

Legend see page 363 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 417

 PN = 30 kW IE3
50 Hz 60 Hz at 50 Hz

30 kW 36 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
14 16 21155 0.90 109.28 62.5 108.9 62.5 108.9
15 18 18659 1.00 96.39 75.4 115.8 75.4 115.8
18 22 16027 1.15 82.79 85.5 117.8 85.5 117.8
21 26 13334 1.35 68.88 93.4 119.8 93.4 119.8
26 31 11063 1.65 57.15 98.5 121.6 98.5 121.6
31 37 9226 2.00 47.66 101.8 123.0 101.8 123.0
35 42 8185 2.20 42.28 103.4 123.8 103.4 123.8 KH153-22P-200L-04E 862 488
36 43 7931 2.30 40.97 103.8 123.9 103.8 123.9
40 48 7221 2.50 37.30 104.7 124.5 104.7 124.5
42 50 6862 2.65 35.45 105.1 124.8 105.1 124.8
46 56 6200 2.95 32.03 105.8 125.3 105.8 125.3
56 67 5138 2.20 26.54 106.8 124.7 106.8 124.7
63 76 4532 3.00 23.41 107.3 125.3 107.3 125.3
17 21 16526 0.80 85.37 ** ** ** **
20 24 14275 0.95 73.74 65.9 83.2 65.9 83.2
24 29 11805 1.15 60.98 74.1 85.7 74.1 85.7
29 35 9714 1.35 50.18 79.3 87.8 79.3 87.8
36 43 7985 1.65 41.25 82.7 89.5 82.7 89.5
K 39 47 7319 1.80 37.81 83.8 90.2 83.8 90.2
42 51 6779 1.95 35.02 84.6 90.7 84.6 90.7
KH123-22P-200L-04E 630 484
45 54 6394 2.05 33.03 85.1 91.1 85.1 91.1
50 60 5786 2.25 29.89 85.9 91.7 85.9 91.7
52 62 5523 2.40 28.53 86.2 92.0 86.2 92.0
63 75 4569 2.85 23.60 87.2 92.9 87.2 92.9
69 83 4174 1.95 21.56 87.3 92.4 87.3 92.4
79 94 3647 2.25 18.84 82.9 93.0 82.9 93.0
91 109 3150 2.60 16.27 78.6 93.6 78.6 93.6
31 37 9218 0.90 47.62 39.0 58.6 39.0 58.6
38 46 7480 1.10 38.64 48.1 60.6 48.1 60.6
48 58 5972 1.35 30.85 53.5 62.3 53.5 62.3
49 59 5846 1.30 30.20 53.9 62.5 53.9 62.5
57 68 5049 1.50 26.08 56.1 63.4 56.1 63.4
67 81 4268 1.80 22.05 57.8 64.3 57.8 64.3
82 99 3484 2.20 18.00 57.0 65.2 57.0 65.2 KH103-22P-200L-04E 507 480
86 104 3328 1.30 17.19 56.9 64.5 56.9 64.5
100 120 2875 1.50 14.85 53.5 65.1 53.5 65.1
101 122 2826 2.70 14.60 52.5 65.9 52.5 65.9
118 142 2431 1.80 12.56 50.1 65.8 50.1 65.8
144 174 1984 2.20 10.25 46.4 66.4 46.4 66.4
178 214 1609 2.70 8.31 42.9 66.9 42.9 66.9
57 69 5027 0.90 25.97 24.1 38.6 24.1 38.6
66 79 4336 1.05 22.40 29.0 39.5 29.0 39.5
79 95 3637 1.25 18.79 32.6 40.4 32.6 40.4
97 116 2958 1.55 15.28 35.3 41.2 35.3 41.2
98 118 2919 1.05 15.08 35.4 39.9 35.4 39.9
KH093-22P-200L-04E 389 476
114 137 2518 1.20 13.01 36.6 40.6 36.6 40.6
124 149 2313 1.95 11.95 37.1 42.1 37.1 42.1
136 163 2112 1.45 10.91 37.6 41.3 37.6 41.3
167 201 1717 1.75 8.87 37.0 42.0 37.0 42.0
213 256 1343 2.25 6.94 33.5 42.7 33.5 42.7

Legend see page 363 ** ... on request

418 WG20 Gear Units and Geared Motors www.weg.net

 PN = 37 kW IE3
50 Hz 60 Hz at 50 Hz

37 kW 44 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
15 18 23013 0.80 96.39 ** ** ** **
18 22 19766 0.95 82.79 70.1 114.9 70.1 114.9
21 26 16445 1.10 68.88 84.0 117.5 84.0 117.5
26 31 13645 1.35 57.15 92.6 119.6 92.6 119.6
31 37 11379 1.60 47.66 97.9 121.3 97.9 121.3
35 42 10094 1.80 42.28 100.3 122.3 100.3 122.3
36 43 9782 1.85 40.97 100.9 122.5 100.9 122.5
KH153-22P-200L-04F 889 488
40 48 8905 2.05 37.30 102.3 123.2 102.3 123.2
42 50 8464 2.15 35.45 103.0 123.5 103.0 123.5
46 56 7647 2.40 32.03 104.1 124.2 104.1 124.2
56 67 6336 1.80 26.54 105.7 123.5 105.7 123.5
56 67 6363 2.85 26.65 105.7 125.1 105.7 125.1
63 76 5589 2.45 23.41 106.4 124.2 106.4 124.2
74 89 4801 2.80 20.11 107.1 125.0 107.1 125.0
24 29 14559 0.90 60.98 64.8 82.9 64.8 82.9
29 36 11980 1.10 50.18 73.6 85.5 73.6 85.5
36 43 9848 1.35 41.25 79.0 87.6 79.0 87.6
39 47 9027 1.45 37.81 80.8 88.5 80.8 88.5
42 51 8361 1.60 35.02 82.0 89.1 82.0 89.1 K
45 54 7886 1.65 33.03 82.9 89.6 82.9 89.6
50 60 7136 1.85 29.89 84.1 90.3 84.1 90.3
KH123-22P-200L-04F 657 484
52 62 6812 1.95 28.53 84.6 90.7 84.6 90.7
63 76 5635 2.35 23.60 86.1 91.9 86.1 91.9
69 83 5147 1.60 21.56 86.6 91.2 86.6 91.2
76 92 4637 2.85 19.42 85.0 92.9 85.0 92.9
79 95 4498 1.85 18.84 85.0 92.0 85.0 92.0
91 110 3884 2.10 16.27 80.4 92.7 80.4 92.7
110 132 3214 2.55 13.46 74.9 93.6 74.9 93.6
38 46 9225 0.90 38.64 39.0 58.6 39.0 58.6
48 58 7365 1.10 30.85 48.6 60.8 48.6 60.8
49 59 7210 1.05 30.20 49.2 60.9 49.2 60.9
57 68 6227 1.25 26.08 52.7 62.1 52.7 62.1
67 81 5264 1.45 22.05 55.5 63.2 55.5 63.2
82 99 4298 1.75 18.00 57.7 64.3 57.7 64.3
86 104 4104 1.05 17.19 58.1 63.4 58.1 63.4
KH103-22P-200L-04F 534 480
100 120 3545 1.25 14.85 55.3 64.2 55.3 64.2
101 122 3486 2.20 14.60 54.1 65.2 54.1 65.2
118 142 2999 1.45 12.56 51.7 65.0 51.7 65.0
127 153 2784 2.70 11.66 49.4 66.0 49.4 66.0
144 174 2447 1.75 10.25 47.6 65.7 47.6 65.7
178 214 1984 2.20 8.31 43.9 66.4 43.9 66.4
223 268 1585 2.70 6.64 40.3 66.9 40.3 66.9

Legend see page 363 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 419

 PN = 45 kW IE3
50 Hz 60 Hz at 50 Hz

45 kW 55 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
21 26 20001 0.90 68.88 68.9 114.7 68.9 114.7
26 31 16595 1.10 57.15 83.5 117.3 83.5 117.3
31 37 13839 1.35 47.66 92.0 119.4 92.0 119.4
35 42 12277 1.50 42.28 95.9 120.6 95.9 120.6
36 43 11897 1.55 40.97 96.8 120.9 96.8 120.9
40 48 10831 1.70 37.30 99.0 121.7 99.0 121.7
42 50 10294 1.75 35.45 100.0 122.1 100.0 122.1 KH153-22P-225S/M-04F 1026 488
46 56 9301 1.95 32.03 101.7 122.9 101.7 122.9
56 67 7738 2.35 26.65 104.0 124.1 104.0 124.1
63 76 6798 2.00 23.41 105.2 123.0 105.2 123.0
67 81 6420 2.85 22.11 105.6 125.1 105.6 125.1
74 89 5839 2.30 20.11 106.2 124.0 106.2 124.0
88 107 4858 2.95 16.73 107.1 125.0 107.1 125.0
29 36 14571 0.90 50.18 64.7 82.9 64.7 82.9
36 43 11978 1.10 41.25 73.6 85.5 73.6 85.5
39 47 10979 1.20 37.81 76.3 86.5 76.3 86.5
42 51 10169 1.30 35.02 78.3 87.3 78.3 87.3
45 54 9591 1.40 33.03 79.6 87.9 79.6 87.9
K 50 60 8679 1.50 29.89 81.5 88.8 81.5 88.8
52 62 8284 1.60 28.53 82.2 89.2 82.2 89.2
63 76 6853 1.90 23.60 84.5 90.6 84.5 90.6 KH123-22P-225S/M-04F 794 484
69 83 6260 1.30 21.56 85.3 89.8 85.3 89.8
76 92 5639 2.35 19.42 86.1 91.8 86.1 91.8
79 95 5471 1.50 18.84 86.3 90.8 86.3 90.8
91 110 4724 1.75 16.27 82.4 91.7 82.4 91.7
93 112 4634 2.85 15.96 80.6 92.9 80.6 92.9
110 132 3908 2.10 13.46 76.5 92.7 76.5 92.7
134 161 3214 2.55 11.07 71.0 93.5 71.0 93.5
48 58 8958 0.90 30.85 40.7 58.9 40.7 58.9
49 59 8769 0.90 30.20 41.8 59.1 41.8 59.1
57 68 7573 1.00 26.08 47.7 60.5 47.7 60.5
67 81 6403 1.20 22.05 52.2 61.9 52.2 61.9
82 99 5227 1.45 18.00 55.6 63.2 55.6 63.2
86 104 4991 0.90 17.19 56.2 62.2 56.2 62.2
100 120 4312 1.00 14.85 57.4 63.1 57.4 63.1 KH103-22P-225S/M-04F 671 480
101 122 4239 1.80 14.60 55.9 64.3 55.9 64.3
118 142 3647 1.20 12.56 53.4 64.0 53.4 64.0
127 153 3386 2.25 11.66 50.8 65.3 50.8 65.3
144 174 2976 1.45 10.25 49.1 65.0 49.1 65.0
178 214 2413 1.80 8.31 45.0 65.8 45.0 65.8
223 268 1928 2.25 6.64 41.2 66.5 41.2 66.5

Legend see page 363

420 WG20 Gear Units and Geared Motors www.weg.net

 PN = 55 kW IE3
50 Hz 60 Hz at 50 Hz

55 kW 66 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
26 31 20282 0.90 57.15 67.5 114.5 67.5 114.5
31 37 16914 1.10 47.66 82.4 117.1 82.4 117.1
36 44 14540 1.25 40.97 90.1 118.9 90.1 118.9
40 48 13238 1.40 37.30 93.6 119.9 93.6 119.9
42 50 12581 1.45 35.45 95.2 120.4 95.2 120.4
46 56 11367 1.60 32.03 97.9 121.3 97.9 121.3
56 67 9458 1.95 26.65 101.4 122.8 101.4 122.8 KH153-22P-225S/M-04G 1074 488
63 76 8308 1.65 23.41 103.2 121.4 103.2 121.4
67 81 7847 2.30 22.11 103.9 124.0 103.9 124.0
74 89 7137 1.90 20.11 104.8 122.6 104.8 122.6
80 97 6544 2.80 18.44 105.5 125.0 105.5 125.0
88 107 5937 2.40 16.73 106.1 123.9 106.1 123.9
107 129 4926 2.90 13.88 107.0 124.9 107.0 124.9
36 43 14640 0.90 41.25 64.5 82.8 64.5 82.8
42 51 12429 1.05 35.02 72.3 85.0 72.3 85.0
45 54 11722 1.15 33.03 74.3 85.8 74.3 85.8
50 60 10608 1.25 29.89 77.3 86.9 77.3 86.9
52 63 10125 1.30 28.53 78.4 87.4 78.4 87.4
63 76 8376 1.60 23.60 82.0 89.1 82.0 89.1 K
76 92 6892 1.90 19.42 84.4 90.6 84.4 90.6
79 95 6686 1.25 18.84 84.7 89.3 84.7 89.3
KH123-22P-225S/M-04G 842 484
91 110 5774 1.45 16.27 85.0 90.4 85.0 90.4
93 112 5664 2.30 15.96 82.9 91.8 82.9 91.8
109 132 4809 2.75 13.55 77.7 92.7 77.7 92.7
110 133 4777 1.75 13.46 78.6 91.6 78.6 91.6
134 161 3929 2.10 11.07 72.7 92.7 72.7 92.7
163 196 3230 2.55 9.10 67.4 93.5 67.4 93.5
191 231 2743 3.00 7.73 63.5 94.1 63.5 94.1
224 270 2342 3.50 6.60 59.8 94.6 59.8 94.6
57 68 9256 0.85 26.08 38.8 58.6 38.8 58.6
67 81 7826 1.00 22.05 46.6 60.2 46.6 60.2
82 99 6388 1.20 18.00 52.2 61.9 52.2 61.9
100 120 5270 0.85 14.85 55.5 61.8 55.5 61.8
101 122 5182 1.45 14.60 55.7 63.2 55.7 63.2
KH103-22P-225S/M-04G 719 480
118 142 4458 1.00 12.56 55.6 62.9 55.6 62.9
127 153 4138 1.85 11.66 52.6 64.4 52.6 64.4
144 174 3638 1.20 10.25 50.8 64.1 50.8 64.1
178 215 2949 1.45 8.31 46.5 65.0 46.5 65.0
223 269 2357 1.85 6.64 42.3 65.9 42.3 65.9

Legend see page 363

www.weg.net WG20 Gear Units and Geared Motors 421

 PN = 75 kW IE4
50 Hz 60 Hz at 50 Hz

75 kW 90 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
31 38 22910 0.80 47.66 ** ** ** **
36 44 19694 0.95 40.97 70.5 115.0 70.5 115.0
40 48 17930 1.05 37.30 78.4 116.3 78.4 116.3
42 51 17041 1.10 35.45 81.9 117.0 81.9 117.0
47 56 15397 1.20 32.03 87.5 118.3 87.5 118.3
56 67 12811 1.45 26.65 94.7 120.2 94.7 120.2
64 77 11253 1.25 23.41 98.1 118.4 98.1 118.4
67 81 10628 1.70 22.11 99.4 121.9 99.4 121.9
KH153-22S-280S/M-04E 1178 488
74 89 9667 1.40 20.11 101.1 120.0 101.1 120.0
81 97 8864 2.05 18.44 102.4 123.2 102.4 123.2
89 107 8042 1.80 16.73 103.6 121.7 103.6 121.7
94 113 7619 2.40 15.85 104.2 124.2 104.2 124.2
107 129 6672 2.15 13.88 105.3 123.1 105.3 123.1
109 131 6595 2.75 13.72 105.4 125.0 105.4 125.0
129 155 5567 2.50 11.58 106.5 124.3 106.5 124.3
150 180 4783 2.80 9.95 105.3 125.1 105.3 125.1
43 51 16834 0.80 35.02 ** ** ** **
45 54 15878 0.85 33.03 59.0 81.6 59.0 81.6
K 50 60 14368 0.95 29.89 65.5 83.1 65.5 83.1
52 63 13715 0.95 28.53 68.0 83.8 68.0 83.8
63 76 11345 1.15 23.60 75.4 86.1 75.4 86.1
77 92 9335 1.40 19.42 80.1 88.1 80.1 88.1
79 95 9056 0.95 18.84 80.7 86.4 80.7 86.4
92 110 7821 1.05 16.27 83.0 87.9 83.0 87.9
KH123-22S-280S/M-04E 946 484
93 112 7672 1.70 15.96 83.2 89.8 83.2 89.8
110 132 6514 2.00 13.55 81.3 91.0 81.3 91.0
111 133 6470 1.30 13.46 82.6 89.5 82.6 89.5
129 155 5562 2.35 11.57 76.1 91.9 76.1 91.9
135 162 5321 1.55 11.07 76.0 91.0 76.0 91.0
164 197 4374 1.90 9.10 70.1 92.1 70.1 92.1
193 232 3716 2.20 7.73 65.7 92.9 65.7 92.9
226 271 3173 2.60 6.60 61.7 93.6 61.7 93.6

Legend see page 363 ** ... on request

422 WG20 Gear Units and Geared Motors www.weg.net

 PN = 90 kW IE4
50 Hz 60 Hz at 50 Hz

90 kW 108 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
36 44 23665 0.80 40.97 ** ** ** **
40 48 21545 0.85 37.30 60.1 103.8 60.1 103.8
42 50 20477 0.90 35.45 66.4 114.4 66.4 114.4
46 56 18501 1.00 32.03 76.0 115.9 76.0 115.9
56 67 15394 1.20 26.65 87.5 118.3 87.5 118.3
64 76 13522 1.05 23.41 92.9 116.1 92.9 116.1
67 81 12771 1.45 22.11 94.8 120.3 94.8 120.3
74 89 11616 1.20 20.11 97.4 118.0 97.4 118.0
KH153-22S-280S/M-04F 1380 488
81 97 10651 1.70 18.44 99.3 121.9 99.3 121.9
89 107 9664 1.50 16.73 101.1 120.0 101.1 120.0
94 113 9155 2.00 15.85 101.9 123.0 101.9 123.0
107 129 8017 1.80 13.88 103.6 121.7 103.6 121.7
108 130 7925 2.30 13.72 103.8 124.0 103.8 124.0
128 154 6689 2.10 11.58 105.3 123.1 105.3 123.1
150 179 5747 2.35 9.95 106.3 124.1 106.3 124.1
173 207 4973 2.60 8.61 101.7 124.9 101.7 124.9

Legend see page 363 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 423

 PN = 110 kW IE4
50 Hz 60 Hz at 50 Hz

110 kW 132 kW Output shaft Hollow shaft Dimension

sheet
n50 n60 M2 fB i FrN FaN FrN FaN m see page
min-1 min-1 Nm kN kN kN kN kg
46 56 22613 0.80 32.03 ** ** ** **
56 67 18814 1.00 26.65 74.7 115.6 74.7 115.6
64 76 16527 0.85 23.41 83.8 113.0 83.8 113.0
67 81 15609 1.20 22.11 86.8 118.1 86.8 118.1
74 89 14197 0.95 20.11 91.1 115.4 91.1 115.4
81 97 13018 1.40 18.44 94.2 120.1 94.2 120.1
89 107 11811 1.20 16.73 97.0 117.8 97.0 117.8 KH153-22S-280S/M-04G 1380 488
94 113 11190 1.65 15.85 98.3 121.5 98.3 121.5
107 129 9799 1.45 13.88 100.9 119.9 100.9 119.9
108 130 9686 1.90 13.72 101.1 122.6 101.1 122.6
128 154 8175 1.70 11.58 103.4 121.6 103.4 121.6
150 179 7025 1.90 9.95 104.9 122.8 104.9 122.8
173 207 6078 2.15 8.61 104.1 123.7 104.1 123.7

Legend see page 363 ** ... on request

424 WG20 Gear Units and Geared Motors www.weg.net

Selection tables - Gear units
Structure of the selection tables

1 2 3 4 5 6
IEC motor frame size 7
63 71 80 90 100 112 132 160 180 200 225 - 280

Type iges. M2nenn n2 iexakt n1max

IEC adapter 8
I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 I225 I250 I280

NEMA adapter 9
N213/ N254/ N284/ N324/
N56 N143/145 N182 N184 N364 - -
[Nm] [min-1] [min-1] 215 256 286 326
K022

2 stages 10

n1=1400 min-1 11

Maximum torque
12
K
110 Nm

1 2 13 15
SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size 14 n1max
[mm] 16

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110

1 Type of gear unit

2 Total ratio
3 Permissible output torque at S1 operation (fB = 1.0)
4 Output speed (gear unit) at n1 = 1400 min-1
5 Exact mathematical ratio
6 Maximum permissible input speed gear unit. valid for direct mounting and IEC / NEMA adapter
Max. perm. input speed IEC / NEMA adapter: I63 - I132 / N56 - N213 = 3000 min-1, I160 - I280 / N254 - N364 = 2500 min-1
Max. perm. motor speed (Direct mounting): motor frame size 63 - 180 = 3000 min-1, 200 - 280 = 2500 min-1.
Higher motor speed on request
7 Possible motor frame sizes (Direct mounting)
8 Possible IEC adapter sizes
9 Possible NEMA adapter sizes
10 Number of gear stages
11 Motor speed
12 Maximum torque
13 Maximum input speed - SERVO adapter
14 Possible SERVO adapter sizes
15 Maximum input speed - direct mounting, IEC / NEMA adapter and input unit
Higher input speeds on request
16 Possible input shafts of the input unit

www.weg.net WG20 Gear Units and Geared Motors 425

 IEC motor frame size

63 71 80 90 100 - - - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 - - - - - - - -

NEMA adapter

N56 N143/145 N182 - - - - - - - -

[Nm] [min-1] [min-1]
K022 68.88 110 20 551/8 6000
61.75 102 23 247/4 6000
53.65 110 26 1073/20 6000
48.10 110 29 481/10 6000
43.50 110 32 87/2 6000
39.00 110 36 39/1 6000
34.27 110 41 377/11 6000
30.88 51 45 247/8 6000
30.73 110 46 338/11 6000
26.41 110 53 1479/56 6000
24.05 81 58 481/20 6000
23.68 110 59 663/28 6000
2 stages 20.63 103 68 1073/52 6000
19.50 81 72 39/2 6000
18.50 102 76 37/2 6000
n1=1400 min-1
15.41 93 91 493/32 6000

K Maximum torque
15.36
13.81
81
93
91
101
169/11
221/16
6000
6000
110 Nm 13.29 89 105 319/24 6000
11.92 89 117 143/12 6000
11.84 81 118 663/56 6000
11.60 85 121 58/5 6000
10.40 85 135 52/5 6000
9.25 81 151 37/4 6000
8.51 77 164 783/92 6000
7.63 77 183 351/46 6000
6.91 74 203 221/32 6000
5.96 69 235 143/24 6000
5.20 65 269 26/5 6000
3.82 57 367 351/92 6000
K033 217.88 200 6.4 1743/8 6000
177.19 200 7.9 2835/16 6000
140.80 200 9.9 6195/44 6000
108.75 200 13 435/4 6000
86.83 200 16 4515/52 6000
71.93 200 19 1079/15 6000
65.63 200 21 525/8 6000
58.50 200 24 117/2 6000
49.88 200 28 399/8 6000
46.48 200 30 1534/33 6000
38.80 200 36 1785/46 6000
3 stages
35.90 200 39 754/21 6000
30.29 200 46 1575/52 6000
n1=1400 min-1 29.97 129 47 1079/36 6000
28.67 200 49 86/3 6000
24.38 160 57 195/8 6000
Maximum torque
21.67 200 65 65/3 6000
200 Nm
19.37 163 72 3835/198 6000
16.47 200 85 247/15 6000
14.96 163 94 1885/126 6000
12.81 200 109 884/69 6000
11.94 163 117 215/18 6000
10.00 200 140 10/1 6000
9.03 163 155 325/36 6000
6.86 149 204 247/36 6000
5.34 137 262 1105/207 6000
4.17 126 336 25/6 6000

Legend see page 425

426 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
K022 68.88 5000 -
61.75 5000 -
53.65 5000 3000
48.10 5000 3000
43.50 5000 3000
39.00 5000 3000
34.27 5000 3000
30.88 5000 -
30.73 5000 3000
26.41 5000 3000
24.05 5000 3000
23.68 5000 3000
20.63 5000 3000
19.50 5000 3000
18.50 5000 3000
15.41 4900 3000
15.36
13.81
5000
4900
3000
3000 K
13.29 4300 3000
11.92 4300 3000
11.84 5000 3000
11.60 3900 3000
10.40 3900 3000
9.25 5000 3000
8.51 3400 3000
7.63 3400 3000
6.91 4900 3000
5.96 4300 3000
5.20 3900 3000
3.82 3400 3000
K033 217.88 5000 3000
177.19 5000 3000
140.80 5000 3000
108.75 5000 3000
86.83 5000 3000
71.93 5000 3000
65.63 5000 3000
58.50 5000 3000
49.88 4400 3000
46.48 5000 3000
38.80 3800 3000
35.90 5000 3000
30.29 3400 3000
29.97 5000 3000
28.67 5000 3000
24.38 5000 3000
21.67 5000 3000
19.37 5000 3000
16.47 4400 3000
14.96 5000 3000
12.81 3800 3000
11.94 5000 3000
10.00 3400 3000
9.03 5000 3000
6.86 4400 3000
5.34 3800 3000
4.17 3400 3000

Legend see page 425

www.weg.net WG20 Gear Units and Geared Motors 427

 IEC motor frame size

63 71 80 90 100 112 - - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 - - - - - - -

NEMA adapter

N56 N143/145 N182 N184 - - - - - - -

[Nm] [min-1] [min-1]
K043 277.79 400 5.0 14445/52 6000
227.16 400 6.2 23625/104 6000
179.37 400 7.8 25650/143 6000
139.08 400 10 50625/364 6000
113.83 400 12 38475/338 6000
89.17 378 16 535/6 6000
87.62 400 16 18225/208 6000
72.92 400 19 875/12 6000
66.20 400 21 6885/104 6000
57.58 400 24 1900/33 6000
54.18 400 26 16200/299 6000
47.07 200 30 93197/1980 6000
44.64 400 31 625/14 6000
43.93 400 32 7425/169 6000
38.49 270 36 30485/792 6000
3 stages 36.78 384 38 3825/104 5600

K 36.54
30.39
400
324
38
46
475/13
33098/1089
6000
6000
n1=1400 min-1
29.81 361 47 775/26 5000
28.74 357 49 20925/728 4800
Maximum torque 28.13 400 50 225/8 6000
400 Nm 23.57 307 59 21775/924 6000
21.25 400 66 85/4 6000
19.29 294 73 1273/66 6000
17.39 400 81 400/23 6000
14.85 278 94 2613/176 6000
14.10 400 99 550/39 6000
11.81 400 119 425/36 5600
11.22 262 125 14807/1320 6000
9.57 373 146 775/81 5000
9.23 369 152 775/84 4800
9.18 251 152 6968/759 6000
7.44 240 188 67/9 6000
6.23 231 225 14807/2376 5600
5.05 221 277 27001/5346 5000
4.87 219 287 27001/5544 4800

Legend see page 425

428 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
K043 277.79 5000 3000
227.16 5000 3000
179.37 5000 3000
139.08 5000 3000
113.83 5000 3000
89.17 5000 3000
87.62 5000 3000
72.92 5000 3000
66.20 4900 3000
57.58 5000 3000
54.18 4200 3000
47.07 5000 3000
44.64 5000 3000
43.93 3700 3000
38.49 5000 3000
36.78 3400 3000
36.54
30.39
5000
5000
3000
3000 K
29.81 3000 3000
28.74 2900 2900
28.13 5000 3000
23.57 5000 3000
21.25 4900 3000
19.29 5000 3000
17.39 4200 3000
14.85 5000 3000
14.10 3700 3000
11.81 3400 3000
11.22 4900 3000
9.57 3000 3000
9.23 2900 2900
9.18 4200 3000
7.44 3700 3000
6.23 3400 3000
5.05 3000 3000
4.87 2900 2900

Legend see page 425

www.weg.net WG20 Gear Units and Geared Motors 429

 IEC motor frame size

63 71 80 90 100 112 132 - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 - - - - - -

NEMA adapter

N213/
N56 N143/145 N182 N184 - - - - - -
[Nm] [min-1] [min-1] 215
K053 245.70 600 5.7 2457/10 6000
194.73 600 7.2 2142/11 6000
151.20 600 9.3 756/5 6000
124.06 600 11 8064/65 6000
96.08 600 15 3843/40 6000
80.46 564 17 7644/95 6000
73.08 600 19 1827/25 6000
63.77 600 22 13328/209 6000
60.26 600 23 1386/23 6000
49.52 600 28 4704/95 6000
49.43 600 28 3213/65 6000
42.00 600 33 42/1 5600
40.63 600 34 50176/1235 6000
38.32 268 37 728/19 6000
34.53 600 41 518/15 5000
3 stages 33.30 600 42 333/10 4800

K 31.46
30.37
600
392
44
46
2989/95
19040/627
6000
6000
n1=1400 min-1
27.39 577 51 630/23 4400
23.93 600 58 11368/475 6000
Maximum torque 23.58 413 59 448/19 6000
600 Nm 19.73 600 71 8624/437 6000
19.35 413 72 14336/741 6000
16.19 600 86 19992/1235 6000
14.98 413 93 854/57 6000
13.75 600 102 784/57 5600
11.40 413 123 3248/285 6000
11.31 600 124 29008/2565 5000
10.91 600 128 1036/95 4800
9.40 413 149 12320/1311 6000
8.97 565 156 3920/437 4400
7.71 413 182 1904/247 6000
6.55 413 214 1120/171 5600
5.39 413 260 8288/1539 5000
5.19 413 270 296/57 4800
4.27 413 328 5600/1311 4400

Legend see page 425

430 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
K053 245.70 5000 3000
194.73 5000 3000
151.20 5000 3000
124.06 5000 3000
96.08 5000 3000
80.46 5000 3000
73.08 5000 3000
63.77 5000 3000
60.26 4500 3000
49.52 5000 3000
49.43 3900 3000
42.00 3600 3000
40.63 5000 3000
38.32 5000 3000
34.53 3200 3000
33.30 3100 3000
31.46
30.37
5000
5000
3000
3000 K
27.39 2800 2800
23.93 5000 3000
23.58 5000 3000
19.73 4500 3000
19.35 5000 3000
16.19 3900 3000
14.98 5000 3000
13.75 3600 3000
11.40 5000 3000
11.31 3200 3000
10.91 3100 3000
9.40 4500 3000
8.97 2800 2800
7.71 3900 3000
6.55 3600 3000
5.39 3200 3000
5.19 3100 3000
4.27 2800 2800

Legend see page 425

www.weg.net WG20 Gear Units and Geared Motors 431

 IEC motor frame size

63 71 80 90 100 112 132 - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 - - - - - -

NEMA adapter

N213/
N56 N143/145 N182 N184 - - - - - -
[Nm] [min-1] [min-1] 215
K063 198.00 820 7.1 198/1 6000
156.92 820 8.9 2040/13 6000
121.85 820 11 1584/13 6000
99.98 820 14 16896/169 6000
81.53 571 17 1386/17 6000
77.42 820 18 2013/26 6000
64.62 820 22 840/13 6000
58.89 820 24 3828/65 6000
50.17 820 28 11088/221 6000
48.56 820 29 14520/299 6000
44.35 311 32 754/17 6000
41.17 820 34 118272/2873 6000
39.83 795 35 6732/169 6000
35.15 454 40 1160/33 6000
33.85 757 41 440/13 5600
3 stages 31.88 820 44 14091/442 6000

K 27.83
27.29
714
500
50
51
3256/117
464/17
5000
6000
n1=1400 min-1
26.84 707 52 2442/91 4800
24.25 782 58 26796/1105 6000
Maximum torque 22.40 500 63 14848/663 6000
820 Nm 22.07 666 63 6600/299 4400
20.00 738 70 101640/5083 6000
17.34 500 81 1769/102 6000
16.40 695 85 2772/169 6000
13.94 662 100 3080/221 5600
13.19 500 106 3364/255 6000
11.46 624 122 22792/1989 5000
11.05 618 127 2442/221 4800
10.88 500 129 12760/1173 6000
9.09 582 154 46200/5083 4400
8.92 500 157 116/13 6000
7.58 487 185 1160/153 5600
6.23 459 225 8584/1377 5000
6.01 454 233 2146/357 4800
4.94 428 283 5800/1173 4400

Legend see page 425

432 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
K063 198.00 5000 3000
156.92 5000 3000
121.85 5000 2500
99.98 5000 2500
81.53 5000 3000
77.42 5000 2500
64.62 5000 3000
58.89 5000 2500
50.17 5000 2500
48.56 4700 2500
44.35 5000 3000
41.17 5000 2500
39.83 4200 2500
35.15 5000 3000
33.85 3700 2500
31.88 5000 2500
27.83
27.29
3300
5000
2500
2500 K
26.84 3200 2500
24.25 5000 2500
22.40 5000 2500
22.07 2900 2500
20.00 4700 2500
17.34 5000 2500
16.40 4200 2500
13.94 3700 2500
13.19 5000 2500
11.46 3300 2500
11.05 3200 2500
10.88 4700 2500
9.09 2900 2500
8.92 4200 2500
7.58 3700 2500
6.23 3300 2500
6.01 3200 2500
4.94 2900 2500

Legend see page 425

www.weg.net WG20 Gear Units and Geared Motors 433

 IEC motor frame size

63 71 80 90 100 112 132 160 - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 - - - - - -

NEMA adapter

N213/
N56 N143/145 N182 N184 - - - - - -
[Nm] [min-1] [min-1] 215
K073 256.14 1550 5.5 5635/22 6000
197.75 1550 7.1 791/4 6000
165.85 1550 8.4 2156/13 6000
130.16 1550 11 4165/32 6000
100.45 1550 14 2009/20 6000
99.87 1288 14 18676/187 6000
83.09 1550 17 1911/23 6000
77.11 1550 18 6554/85 6000
70.67 1550 20 3675/52 6000
64.67 1550 22 71456/1105 6000
61.25 1550 23 245/4 5600 *
51.72 1550 27 931/18 5000 *
50.75 1550 28 203/4 6000
49.88 1550 28 399/8 4800
3 stages
47.56 613 29 26680/561 6000
42.61 1550 33 980/23 4400 *

K n1=1400 min-1 39.17

36.72
1550
757
36
38
16646/425
13108/357
6000
6000
32.40 1550 43 63336/1955 6000
Maximum torque
30.79 910 45 20416/663 6000
1550 Nm
27.56 1550 51 6090/221 6000
24.17 910 58 145/6 6000
23.88 1550 59 406/17 5600 *
20.17 1550 69 15428/765 5000 *
19.45 1550 72 1653/85 4800
18.65 910 75 4756/255 6000
16.61 1550 84 6496/391 4400 *
15.43 910 91 6032/391 6000
13.12 910 107 2900/221 6000
11.37 910 123 580/51 5600 *
9.60 910 146 4408/459 5000 *
9.26 910 151 1102/119 4800
7.91 910 177 9280/1173 4400 *

* Only direct mounting of motor possible

Legend see page 425

434 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
K073 256.14 5000 3000
197.75 5000 2500
165.85 5000 2500
130.16 5000 2500
100.45 5000 2500
99.87 5000 3000
83.09 5000 2500
77.11 5000 2500
70.67 4600 2500
64.67 5000 2500
61.25 4200 2500
51.72 3700 2500
50.75 5000 2500
49.88 3600 2500
47.56 5000 3000
42.61 3300 2500
39.17
36.72
5000
5000
2500
2500 K
32.40 5000 2500
30.79 5000 2500
27.56 4600 2500
24.17 5000 2500
23.88 4200 2500
20.17 3700 2500
19.45 3600 2500
18.65 5000 2500
16.61 3300 2500
15.43 5000 2500
13.12 4600 2500
11.37 4200 2500
9.60 3700 2500
9.26 3600 2500
7.91 3300 2500

Legend see page 425

www.weg.net WG20 Gear Units and Geared Motors 435

 IEC motor frame size

63 71 80 90 100 112 132 160 180 - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 I180 - - - -

NEMA adapter

N213/ N254/ N284/

N56 N143/145 N182 N184 - - - -
[Nm] [min-1] [min-1] 215 256 286
K083 206.12 3000 6.8 13398/65 6000
163.14 3000 8.6 26103/160 6000
142.45 3000 9.8 2849/20 6000
125.90 3000 11 25179/200 6000
106.46 3000 13 12243/115 6000
91.51 3000 15 23793/260 6000
79.89 3000 18 6391/80 5600
79.75 2851 18 319/4 6000
68.44 3000 20 616/9 5000
66.00 3000 21 66/1 4800
63.12 2860 22 16159/256 6000
58.25 3000 24 6699/115 4400
55.11 3000 25 5291/96 6000
48.87 3000 29 2541/52 3900
48.71 3000 29 15587/320 6000
45.48 1626 31 2001/44 6000

K 3 stages
41.19
41.18
3000
3000
34
34
7579/184
9471/230
6000
3500
35.99 1631 39 101361/2816 6000
n1=1400 min-1 35.41 3000 40 1133/32 6000
33.76 3000 41 4389/130 3100
31.43 1916 45 11063/352 6000
Maximum torque
30.91 3000 45 11869/384 5600
3000 Nm
27.78 1901 50 97773/3520 6000
26.48 2972 53 715/27 5000
25.54 2940 55 715/28 4800
23.49 1916 60 2067/88 6000
22.54 2832 62 4147/184 4400
20.19 1886 69 7107/352 6000
18.91 2686 74 605/32 3900
17.63 1937 79 24817/1408 5600
15.93 2552 88 5863/368 3500
15.10 1937 93 1495/99 5000
14.56 1748 96 4485/308 4800
13.06 2404 107 209/16 3100
12.85 1937 109 1131/88 4400
10.78 1937 130 345/32 3900
9.09 1937 154 1599/176 3500
7.45 1937 188 1311/176 3100

Legend see page 425

436 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
K083 206.12 5000 2500
163.14 5000 2500
142.45 5000 2500
125.90 5000 2500
106.46 5000 2500
91.51 5000 2500
79.89 4500 2500
79.75 5000 2500
68.44 4000 2500
66.00 3900 2500
63.12 5000 2500
58.25 3600 2500
55.11 5000 2500
48.87 3100 2500
48.71 5000 2500
45.48 5000 2500
41.19
41.18
5000
2800
2500
2500 K
35.99 5000 2500
35.41 5000 2500
33.76 - 2500
31.43 5000 2500
30.91 4500 2500
27.78 5000 2500
26.48 4000 2500
25.54 3900 2500
23.49 5000 2500
22.54 3600 2500
20.19 5000 2500
18.91 3100 2500
17.63 4500 2500
15.93 2800 2500
15.10 4000 2500
14.56 3900 2500
13.06 - 2500
12.85 3600 2500
10.78 3100 2500
9.09 2800 2500
7.45 - 2500

Legend see page 425

www.weg.net WG20 Gear Units and Geared Motors 437

 IEC motor frame size

63 71 80 90 100 112 132 - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 - - - - - -

NEMA adapter

N213/
N56 N143/145 N182 N184 - - - - - -
[Nm] [min-1] [min-1] 215
K084 2205.52 3000 0.63 716793/325 6000
1803.58 3000 0.78 46893/26 6000
1745.64 3000 0.80 2793021/1600 6000
1524.22 3000 0.92 304843/200 6000
1427.51 3000 0.98 182721/128 6000
1424.12 3000 0.98 92568/65 6000
1246.44 3000 1.1 19943/16 6000
1127.18 3000 1.2 45087/40 6000
1104.23 3000 1.3 14355/13 6000
984.20 3000 1.4 4921/5 6000
903.77 3000 1.5 763686/845 6000
873.98 3000 1.6 55935/64 6000
763.13 3000 1.8 6105/8 6000
715.32 3000 2.0 1487871/2080 6000
695.67 3000 2.0 180873/260 6000
4 stages 624.59 3000 2.2 162393/260 6000

K 550.61
525.61
3000
3000
2.5
2.7
704781/1280
341649/650
6000
6000
n1=1400 min-1
480.77 3000 2.9 76923/160 6000
430.17 3000 3.3 643104/1495 6000
Maximum torque 416.02 3000 3.4 1331253/3200 6000
3000 Nm 363.25 3000 3.9 145299/400 6000
348.82 3000 4.0 294756/845 6000
340.47 3000 4.1 78309/230 6000
297.29 3000 4.7 34188/115 6000
292.01 3000 4.8 37961/130 5600
276.09 3000 5.1 287133/1040 6000
241.07 3000 5.8 31339/130 6000
236.66 3000 5.9 138446/585 5000
231.12 3000 6.1 147917/640 5600
228.21 3000 6.1 29667/130 4800
201.80 3000 6.9 48433/240 5600
187.31 3000 7.5 269731/1440 5000
180.62 3000 7.8 115599/640 4800
163.55 3000 8.6 88319/540 5000
157.71 3000 8.9 12617/80 4800

Legend see page 425

438 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
K084 2205.52 5000 3000
1803.58 5000 3000
1745.64 5000 3000
1524.22 5000 3000
1427.51 5000 3000
1424.12 5000 3000
1246.44 5000 3000
1127.18 5000 3000
1104.23 5000 3000
984.20 5000 3000
903.77 5000 3000
873.98 5000 3000
763.13 5000 3000
715.32 5000 3000
695.67 5000 3000
624.59 5000 3000
550.61
525.61
5000
5000
3000
3000 K
480.77 5000 3000
430.17 5000 3000
416.02 5000 3000
363.25 5000 3000
348.82 5000 3000
340.47 5000 3000
297.29 5000 3000
292.01 4500 3000
276.09 5000 3000
241.07 5000 3000
236.66 4000 3000
231.12 4500 3000
228.21 3900 3000
201.80 4500 3000
187.31 4000 3000
180.62 3900 3000
163.55 4000 3000
157.71 3900 3000

Legend see page 425

www.weg.net WG20 Gear Units and Geared Motors 439

 IEC motor frame size

63 71 80 90 100 112 132 160 180 200 - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 I180 - - - -

NEMA adapter

N213/ N254/ N284/

N56 N143/145 N182 N184 - - - -
[Nm] [min-1] [min-1] 215 256 286
K093 169.25 4500 8.3 21156/125 6000
143.08 4500 9.8 49364/345 6000
123.86 4500 11 241531/1950 6000
109.70 4500 13 24682/225 5600
94.90 4500 15 192167/2025 5000
91.51 4500 15 192167/2100 4800
80.74 4500 17 139277/1725 4400
68.71 4500 20 66994/975 3900 *
63.96 4500 22 1599/25 6000
59.28 4500 24 102254/1725 3500 *
54.07 4500 26 3731/69 6000
49.73 4500 28 19393/390 3100 *
46.81 4500 30 5617/120 6000
41.46 4500 34 3731/90 5600
40.43 4500 35 75809/1875 2700 *
3 stages 37.13 2785 38 8541/230 6000

K 35.86
34.58
4500
4149
39
40
58097/1620
58097/1680
5000
4800
n1=1400 min-1
31.61 4500 44 22919/725 2300 *
31.39 2806 45 33215/1058 6000
Maximum torque 30.51 4500 46 42107/1380 4400
4500 Nm 27.18 2795 52 10001/368 6000
25.97 4500 54 779/30 3900 *
24.07 2991 58 6643/276 5600
22.40 4500 62 15457/690 3500 *
20.82 2991 67 103441/4968 5000
20.08 2409 70 103441/5152 4800
18.79 4500 75 451/24 3100 *
17.72 2991 79 74971/4232 4400
15.28 4500 92 22919/1500 2700 *
15.08 2991 93 1387/92 3900 *
13.01 2991 108 27521/2116 3500 *
11.95 4500 117 6929/580 2300 *
10.91 2991 128 4015/368 3100 *
8.87 2991 158 40807/4600 2700 *
6.94 2991 202 37011/5336 2300 *

* Only direct mounting of motor possible

Legend see page 425

440 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
K093 169.25 5000 2500
143.08 5000 2500
123.86 5000 2500
109.70 4800 2500
94.90 4200 2500
91.51 4100 2500
80.74 3700 2500
68.71 3300 2500
63.96 5000 2500
59.28 3000 2500
54.07 5000 2500
49.73 - 2500
46.81 5000 2500
41.46 4800 2500
40.43 - 2300
37.13 5000 2500
35.86
34.58
4200
4100
2500
2500 K
31.61 - 2000
31.39 5000 2500
30.51 3700 2500
27.18 5000 2500
25.97 3300 2500
24.07 4800 2500
22.40 3000 2500
20.82 4200 2500
20.08 4100 2500
18.79 - 2500
17.72 3700 2500
15.28 - 2300
15.08 3300 2500
13.01 3000 2500
11.95 - 2000
10.91 - 2500
8.87 - 2300
6.94 - 2000

Legend see page 425

www.weg.net WG20 Gear Units and Geared Motors 441

 IEC motor frame size

63 71 80 90 100 112 132 - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 - - - - - -

NEMA adapter

N213/
N56 N143/145 N182 N184 - - - - - -
[Nm] [min-1] [min-1] 215
K094 1810.95 4500 0.77 1131846/625 6000
1531.00 4500 0.91 2640974/1725 6000
1480.92 4500 0.95 37023/25 6000
1251.99 4500 1.1 86387/69 6000
1169.35 4500 1.2 1607856/1375 6000
988.58 4500 1.4 3751664/3795 6000
906.69 4500 1.5 31734/35 6000
766.52 4500 1.8 17630/23 6000
742.09 4500 1.9 1205892/1625 6000
4 stages 627.37 4500 2.2 937916/1495 6000
571.21 4500 2.5 142803/250 6000
482.91 4500 2.9 111069/230 6000
n1=1400 min-1
431.58 4500 3.2 269739/625 6000
364.86 4500 3.8 209797/575 6000
Maximum torque 353.21 4500 4.0 1015488/2875 6000
4500 Nm 298.61 4500 4.7 789824/2645 6000

K 286.42
242.14
4500
4500
4.9
5.8
465432/1625
1086008/4485
6000
6000
239.77 4500 5.8 29971/125 5600
202.70 4500 6.9 209797/1035 5600
194.32 4500 7.2 218612/1125 5000
187.38 4500 7.5 163959/875 4800
164.28 4500 8.5 1530284/9315 5000
158.41 4500 8.8 54653/345 4800

Legend see page 425

442 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
K094 1810.95 5000 3000
1531.00 5000 3000
1480.92 5000 3000
1251.99 5000 3000
1169.35 5000 3000
988.58 5000 3000
906.69 5000 3000
766.52 5000 3000
742.09 5000 3000
627.37 5000 3000
571.21 5000 3000
482.91 5000 3000
431.58 5000 3000
364.86 5000 3000
353.21 5000 3000
298.61 5000 3000
286.42
242.14
5000
5000
3000
3000 K
239.77 4800 3000
202.70 4800 3000
194.32 4200 3000
187.38 4100 3000
164.28 4200 3000
158.41 4100 3000

Legend see page 425

www.weg.net WG20 Gear Units and Geared Motors 443

 IEC motor frame size

63 71 80 90 100 112 132 160 180 200 225 - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 I225 - -

NEMA adapter

N213/ N254/ N284/ N324/

N56 N143/145 N182 N184 N364 - -
[Nm] [min-1] [min-1] 215 256 286 326
K103 140.95 8000 9.9 128269/910 6000
124.50 8000 11 13072/105 5600
108.07 8000 13 20425/189 5000
104.21 8000 13 20425/196 4800
93.37 8000 15 3268/35 4400
79.90 8000 18 72713/910 3900
69.01 8000 20 55556/805 3500
58.36 8000 24 817/14 3100
53.27 5963 26 2983/56 6000
47.62 8000 29 41667/875 2700
47.05 7498 30 988/21 5600
40.84 7498 34 30875/756 5000
39.38 4728 36 30875/784 4800
38.64 8000 36 39216/1015 2300
3 stages
35.29 7498 40 247/7 4400
30.85 8000 45 30229/980 2100

K n1=1400 min-1 30.33

30.20
3395
7498
46
46
2669/88
1691/56
6000
3900
26.79 4269 52 884/33 5600
Maximum torque
26.08 7498 54 4199/161 3500
8000 Nm
23.25 4269 60 27625/1188 5000
22.42 2692 62 27625/1232 4800
22.05 7498 63 1235/56 3100
20.09 4269 70 221/11 4400
18.00 7498 78 12597/700 2700
17.19 4269 81 1513/88 3900
14.85 4269 94 3757/253 3500
14.60 7498 96 2964/203 2300
12.56 4269 111 1105/88 3100
11.66 7498 120 9139/784 2100
10.25 4269 137 11271/1100 2700
8.31 4269 168 2652/319 2300
6.64 4269 211 8177/1232 2100

Legend see page 425

444 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
K103 140.95 5000 2500
124.50 5000 2500
108.07 4500 2500
104.21 4400 2500
93.37 4000 2500
79.90 3500 2500
69.01 3200 1800
58.36 - 1800
53.27 5000 2500
47.62 - 1800
47.05 5000 2500
40.84 4500 2500
39.38 4400 2500
38.64 - 1800
35.29 4000 2500
30.85 - 1800
30.33
30.20
5000
3500
2500
2500 K
26.79 5000 2500
26.08 3200 1800
23.25 4500 2500
22.42 4400 2500
22.05 - 1800
20.09 4000 2500
18.00 - 1800
17.19 3500 2500
14.85 3200 1800
14.60 - 1800
12.56 - 1800
11.66 - 1800
10.25 - 1800
8.31 - 1800
6.64 - 1800

Legend see page 425

www.weg.net WG20 Gear Units and Geared Motors 445

 IEC motor frame size

63 71 80 90 100 112 132 160 - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 - - - - -

NEMA adapter

N213/ N254/
N56 N143/145 N182 N184 - - - - -
[Nm] [min-1] [min-1] 215 256
K104 1301.54 8000 1.1 300656/231 6000
1129.81 8000 1.2 2348875/2079 6000
1004.85 8000 1.4 738568/735 6000
976.16 8000 1.4 75164/77 6000
872.27 8000 1.6 2308025/2646 6000
842.74 8000 1.7 1150336/1365 6000
753.64 8000 1.9 184642/245 6000
731.54 8000 1.9 1797400/2457 6000
661.38 8000 2.1 13889/21 6000
632.05 8000 2.2 287584/455 6000
574.12 8000 2.4 1736125/3024 6000
510.43 8000 2.7 267976/525 6000
496.04 8000 2.8 13889/28 6000
443.08 8000 3.2 167485/378 6000
4 stages
422.20 8000 3.3 339872/805 6000
382.82 8000 3.7 66994/175 6000

K n1=1400 min-1 366.49

359.12
8000
8000
3.8
3.9
531050/1449
32680/91
6000
6000
316.65 8000 4.4 254904/805 6000
Maximum torque
311.74 8000 4.5 510625/1638 6000
8000 Nm
311.24 8000 4.5 6536/21 5600
270.17 8000 5.2 102125/378 5600
269.34 8000 5.2 24510/91 6000
262.82 8000 5.3 248368/945 5000
253.44 8000 5.5 62092/245 4800
233.43 8000 6.0 1634/7 5600
228.15 8000 6.1 388075/1701 5000
220.00 8000 6.4 388075/1764 4800
216.51 8000 6.5 104576/483 4400
197.12 8000 7.1 62092/315 5000
190.08 8000 7.4 46569/245 4800
187.95 8000 7.4 817000/4347 4400
162.39 8000 8.6 26144/161 4400

Legend see page 425

446 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
K104 1301.54 5000 3000
1129.81 5000 3000
1004.85 5000 2500
976.16 5000 3000
872.27 5000 2500
842.74 5000 2500
753.64 5000 2500
731.54 5000 2500
661.38 5000 2500
632.05 5000 2500
574.12 5000 2500
510.43 5000 2500
496.04 5000 2500
443.08 5000 2500
422.20 5000 2500
382.82 5000 2500
366.49
359.12
5000
5000
2500
2500 K
316.65 5000 2500
311.74 5000 2500
311.24 5000 2500
270.17 5000 2500
269.34 5000 2500
262.82 4500 2500
253.44 4400 2500
233.43 5000 2500
228.15 4500 2500
220.00 4400 2500
216.51 4000 2500
197.12 4500 2500
190.08 4400 2500
187.95 4000 2500
162.39 4000 2500

Legend see page 425

www.weg.net WG20 Gear Units and Geared Motors 447

 IEC motor frame size

63 71 80 90 100 112 132 160 180 200 225 - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 I225 I250 -

NEMA adapter

N213/ N254/ N284/ N324/

N56 N143/145 N182 N184 N364 - -
[Nm] [min-1] [min-1] 215 256 286 326
K123 151.11 13000 9.3 12089/80 5600
131.76 13000 11 5929/45 5000
127.05 13000 11 2541/20 4800
113.49 13000 12 26103/230 4400
97.73 13000 14 2541/26 3900
85.37 13000 16 3927/46 3500 *
73.74 13000 19 19173/260 3100 *
60.98 13000 23 7623/125 2700 *
58.47 8768 24 22451/384 5600
50.98 9688 27 11011/216 5000
50.18 13000 28 14553/290 2300 *
49.16 5899 28 1573/32 4800
43.91 12727 32 16159/368 4400
41.25 13000 34 165/4 2100 *
37.81 13000 37 605/16 3900
3 stages 35.02 13000 40 10857/310 1900 *

K 33.34
33.03
5000
13000
42
42
46943/1408
12155/368
5600
3500 *
n1=1400 min-1
29.89 13000 47 2541/85 1800 *
29.07 5525 48 2093/72 5000
Maximum torque 28.53 13000 49 913/32 3100 *
13000 Nm 28.03 3364 50 897/32 4800
25.04 7258 56 4407/176 4400
23.60 13000 59 4719/200 2700 *
21.56 8053 65 345/16 3900
19.42 13000 72 9009/464 2300 *
18.84 8155 74 3315/176 3500 *
16.27 8155 86 5727/352 3100 *
15.96 13000 88 3575/224 2100 *
13.55 13000 103 6721/496 1900 *
13.46 8155 104 2691/200 2700 *
11.57 13000 121 1573/136 1800 *
11.07 8155 126 56511/5104 2300 *
9.10 8155 154 22425/2464 2100 *
7.73 8155 181 42159/5456 1900 *
6.60 8155 212 897/136 1800 *

* I250 only. Direct mounting of the motor not possible

Legend see page 425

448 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
K123 151.11 5000 2500
131.76 5000 2500
127.05 5000 2500
113.49 4500 2500
97.73 4000 2500
85.37 3600 1800
73.74 - 1800
60.98 - 1800
58.47 5000 2500
50.98 5000 2500
50.18 - 1800
49.16 5000 2500
43.91 4500 2500
41.25 - 1800
37.81 4000 2500
35.02 - 1800
33.34
33.03
5000
3600
2500
1800 K
29.89 - 1800
29.07 5000 2500
28.53 - 1800
28.03 5000 2500
25.04 4500 2500
23.60 - 1800
21.56 4000 2500
19.42 - 1800
18.84 3600 1800
16.27 - 1800
15.96 - 1800
13.55 - 1800
13.46 - 1800
11.57 - 1800
11.07 - 1800
9.10 - 1800
7.73 - 1800
6.60 - 1800

Legend see page 425

www.weg.net WG20 Gear Units and Geared Motors 449

 IEC motor frame size

63 71 80 90 100 112 132 160 - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 - - - - -

NEMA adapter

N213/ N254/
N56 N143/145 N182 N184 - - - - -
[Nm] [min-1] [min-1] 215 256
K124 1579.81 13000 0.89 25277/16 6000
1377.44 13000 1.0 12397/9 6000
1219.69 13000 1.1 195151/160 6000
1186.50 13000 1.2 2373/2 6000
1063.46 13000 1.3 95711/90 6000
1022.92 13000 1.4 132979/130 6000
1021.73 13000 1.4 26565/26 6000
916.04 13000 1.5 421377/460 6000
891.88 13000 1.6 521752/585 6000
802.79 13000 1.7 205513/256 6000
788.83 13000 1.8 41019/52 6000
768.25 13000 1.8 1148532/1495 6000
699.95 13000 2.0 100793/144 6000
661.56 13000 2.1 111804/169 6000
619.56 13000 2.3 495649/800 6000
602.92 13000 2.3 443751/736 6000

K 540.20
519.19
13000
13000
2.6
2.7
243089/450
215985/416
6000
6000
512.47 13000 2.7 471471/920 6000
4 stages 465.31 13000 3.0 1070223/2300 6000
446.82 13000 3.1 154154/345 6000
435.90 13000 3.2 181335/416 6000
n1=1400 min-1
400.70 13000 3.5 104181/260 6000
384.88 13000 3.6 1018017/2645 6000
Maximum torque 380.06 13000 3.7 29645/78 6000
13000 Nm 377.78 13000 3.7 12089/32 5600
331.43 13000 4.2 7623/23 6000
329.39 13000 4.3 5929/18 5600
327.38 13000 4.3 391545/1196 6000
319.02 13000 4.4 229691/720 5000
307.62 13000 4.6 98439/320 4800
283.73 13000 4.9 26103/92 5600
281.92 13000 5.0 190575/676 6000
278.15 13000 5.0 112651/405 5000
268.22 13000 5.2 16093/60 4800
262.80 13000 5.3 12089/46 4400
244.33 13000 5.7 12705/52 5600
239.59 13000 5.8 165319/690 5000
231.04 13000 6.1 212553/920 4800
229.14 13000 6.1 47432/207 4400
206.32 13000 6.8 16093/78 5000
198.95 13000 7.0 20691/104 4800
197.38 13000 7.1 104412/529 4400
169.97 13000 8.2 50820/299 4400

Legend see page 425

450 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
K124 1579.81 5000 3000
1377.44 5000 3000
1219.69 5000 2500
1186.50 5000 3000
1063.46 5000 2500
1022.92 5000 2500
1021.73 5000 3000
916.04 5000 2500
891.88 5000 2500
802.79 5000 2500
788.83 5000 2500
768.25 5000 2500
699.95 5000 2500
661.56 5000 2500
619.56 5000 2500
602.92 5000 2500
540.20
519.19
5000
5000
2500
2500 K
512.47 5000 2500
465.31 5000 2500
446.82 5000 2500
435.90 5000 2500
400.70 5000 2500
384.88 5000 2500
380.06 5000 2500
377.78 5000 2500
331.43 5000 2500
329.39 5000 2500
327.38 5000 2500
319.02 4800 2500
307.62 4600 2500
283.73 5000 2500
281.92 5000 2500
278.15 4800 2500
268.22 4600 2500
262.80 4200 2500
244.33 5000 2500
239.59 4800 2500
231.04 4600 2500
229.14 4200 2500
206.32 4800 2500
198.95 4600 2500
197.38 4200 2500
169.97 4200 2500

Legend see page 425

www.weg.net WG20 Gear Units and Geared Motors 451

 IEC motor frame size

63 71 80 90 100 112 132 160 180 200 225 - 280

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 I225 I250 I280

NEMA adapter

N213/ N254/ N284/ N324/

N56 N143/145 N182 N184 N364 - -
[Nm] [min-1] [min-1] 215 256 286 326
K153 146.69 18000 9.5 6601/45 5000
126.34 18000 11 23247/184 4400
109.28 18000 13 28413/260 3900
96.39 18000 15 88683/920 3500 * x
82.79 18000 17 4305/52 3100 * x
68.88 18000 20 1722/25 2700 * x
57.15 18000 24 66297/1160 2300 * x
56.75 10785 25 12259/216 5000
48.88 14174 29 71955/1472 4400
47.66 18000 29 3813/80 2100 *
42.28 17806 33 1353/32 3900
40.97 18000 34 50799/1240 1900 *
3 stages 37.30 18000 38 54899/1472 3500 *
35.63 6771 39 962/27 5000
35.45 18000 39 6027/170 1800 *
n1=1400 min-1
32.03 18000 44 1025/32 3100 *

K Maximum torque
30.69
26.65
8899
18000
46
53
64935/2116
533/20
4400
2700 *
18000 Nm 26.54 11178 53 1221/46 3900
23.41 13593 60 49543/2116 3500 *
22.11 18000 63 41041/1856 2300 *
20.11 13390 70 925/46 3100 *
18.44 18000 76 16523/896 2100 *
16.73 14116 84 1924/115 2700 *
15.85 18000 88 31447/1984 1900 *
13.88 14116 101 37037/2668 2300 *
13.72 18000 102 3731/272 1800 *
11.58 13865 121 14911/1288 2100 *
9.95 13306 141 28379/2852 1900 *
8.61 12793 163 3367/391 1800 *

* I250 only. Direct mounting of the motor not possible

x I280 only. Direct mounting of the motor not possible

Legend see page 425

452 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
K153 146.69 - 2500
126.34 - 2500
109.28 - 2500
96.39 - 1800
82.79 - 1800
68.88 - 1800
57.15 - 1800
56.75 - 2500
48.88 - 2500
47.66 - 1800
42.28 - 2500
40.97 - 1800
37.30 - 1800
35.63 - 2500
35.45 - 1800
32.03 - 1800
30.69
26.65
-
-
2500
1800 K
26.54 - 2500
23.41 - 1800
22.11 - 1800
20.11 - 1800
18.44 - 1800
16.73 - 1800
15.85 - 1800
13.88 - 1800
13.72 - 1800
11.58 - 1800
9.95 - 1800
8.61 - 1800

Legend see page 425

www.weg.net WG20 Gear Units and Geared Motors 453

 IEC motor frame size

63 71 80 90 100 112 132 160 180 200 - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 - - -

NEMA adapter

N213/ N254/ N284/ N324/

N56 N143/145 N182 N184 - - -
[Nm] [min-1] [min-1] 215 256 286 326
K154 1308.92 18000 1.1 765716/585 6000
1127.36 18000 1.2 674163/598 6000
1035.99 18000 1.4 745913/720 6000
975.12 18000 1.4 823977/845 6000
904.58 18000 1.5 244237/270 6000
892.29 18000 1.6 2626911/2944 6000
799.45 18000 1.8 719509/900 6000
779.11 18000 1.8 286713/368 6000
771.80 18000 1.8 3210669/4160 6000
688.57 18000 2.0 2533923/3680 6000
676.04 18000 2.1 30422/45 6000
673.90 18000 2.1 350427/520 6000
595.58 18000 2.4 3097017/5200 6000
582.27 18000 2.4 1232091/2116 6000
581.11 18000 2.4 679903/1170 6000
507.30 18000 2.8 547883/1080 5600

K 4 stages
503.64
500.51
18000
18000
2.8
2.8
1505889/2990
2394441/4784
6000
6000
436.93 18000 3.2 643167/1472 5600
n1=1400 min-1 434.63 18000 3.2 105616/243 5000
432.92 18000 3.2 2926539/6760 6000
419.11 18000 3.3 3772/9 4800
Maximum torque
377.93 18000 3.7 786093/2080 5600
18000 Nm
374.35 18000 3.7 8610/23 5000
369.91 18000 3.8 16646/45 4400
360.98 18000 3.9 16605/46 4800
323.79 18000 4.3 12628/39 5000
318.60 18000 4.4 674163/2116 4400
312.23 18000 4.5 4059/13 4800
310.30 18000 4.5 72611/234 3900
275.58 18000 5.1 823977/2990 4400
267.26 18000 5.2 1278585/4784 3900
261.49 18000 5.4 11767/45 3500
231.17 18000 6.1 312543/1352 3900
225.22 18000 6.2 953127/4232 3500
214.39 18000 6.5 125419/585 3100
194.80 18000 7.2 1164933/5980 3500
184.65 18000 7.6 441693/2392 3100
159.72 18000 8.8 539847/3380 3100

Legend see page 425

454 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
K154 1308.92 5000 2500
1127.36 5000 2500
1035.99 5000 2500
975.12 5000 2500
904.58 5000 2500
892.29 5000 2500
799.45 5000 2500
779.11 5000 2500
771.80 5000 2500
688.57 5000 2500
676.04 5000 2500
673.90 5000 2500
595.58 5000 2500
582.27 5000 2500
581.11 5000 2500
507.30 5000 2500
503.64
500.51
5000
5000
2500
2500 K
436.93 5000 2500
434.63 4900 2500
432.92 5000 2500
419.11 4700 2500
377.93 5000 2500
374.35 4900 2500
369.91 4300 2500
360.98 4700 2500
323.79 4900 2500
318.60 4300 2500
312.23 4700 2500
310.30 3800 2500
275.58 4300 2500
267.26 3800 2500
261.49 3500 2500
231.17 3800 2500
225.22 3500 2500
214.39 - 2500
194.80 3500 2500
184.65 - 2500
159.72 - 2500

Legend see page 425

www.weg.net WG20 Gear Units and Geared Motors 455

 IEC motor frame size

63 71 80 90 100 112 132 - - - - - -

IEC adapter
Type iges. M2nenn n2 iexakt n1max
I63 I71 I80 I90 I100 I112 I132 - - - - - -

NEMA adapter

N213/
N56 N143/145 N182 N184 - - - - - -
[Nm] [min-1] [min-1] 215
K155 14005.40 18000 0.10 40965806/2925 6000
11453.02 18000 0.12 1340003/117 6000
9679.02 18000 0.14 26133359/2700 6000
9043.42 18000 0.15 58194416/6435 6000
7915.09 18000 0.18 1709659/216 6000
7012.05 18000 0.20 273470/39 6000
6249.84 18000 0.22 9281006/1485 6000
5739.09 18000 0.24 14548604/2535 6000
4845.97 18000 0.29 174455/36 6000
5 stages 4417.59 18000 0.32 574287/130 6000
3966.24 18000 0.35 4640503/1170 6000
3337.74 18000 0.42 3254293/975 6000
n1=1400 min-1
3052.96 18000 0.46 244237/80 6000
2731.65 18000 0.51 532672/195 6000
Maximum torque 2306.68 18000 0.61 4152029/1800 6000
18000 Nm 2215.09 18000 0.63 16845752/7605 6000

K 1887.82
1854.30
18000
18000
0.74
0.76
84952/45
3254293/1755
6000
5600
1530.83 18000 0.91 2686607/1755 6000
1502.83 18000 0.93 23737196/15795 5000
1449.16 18000 0.97 847757/585 4800
1281.49 18000 1.1 4152029/3240 5600
1038.59 18000 1.3 7571347/7290 5000
1001.50 18000 1.4 1081621/1080 4800

Legend see page 425

456 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50 28x60 38x80 42x110 48x110 55x110
K155 14005.40 5000 3000
11453.02 5000 3000
9679.02 5000 3000
9043.42 5000 3000
7915.09 5000 3000
7012.05 5000 3000
6249.84 5000 3000
5739.09 5000 3000
4845.97 5000 3000
4417.59 5000 3000
3966.24 5000 3000
3337.74 5000 3000
3052.96 5000 3000
2731.65 5000 3000
2306.68 5000 3000
2215.09 5000 3000
1887.82
1854.30
5000
5000
3000
3000 K
1530.83 5000 3000
1502.83 4900 3000
1449.16 4700 3000
1281.49 5000 3000
1038.59 4900 3000
1001.50 4700 3000

Legend see page 425

www.weg.net WG20 Gear Units and Geared Motors 457

K

458 WG20 Gear Units and Geared Motors www.weg.net

Dimension sheets Geared Motors

K
www.weg.net WG20 Gear Units and Geared Motors 459
 KH022 - Hollow shaft

kB
k
63 131,5 LB1 AD
8 LB 58,5+121) 60
36

Ø 90

Ø AC
163

Ø 64
126

70
63 -0,5

28

Ø9
M6 x 12 35 Ø9 90

Ø 68 H7
70 112
117

3,5 1)
incl. hollow shaft protection cap
117
28,3 50 24
KD022 - Shrink disc
K

Ø 40
8

Ø 25 H7
M10 x 40 107
94 60 120

Ø 25 h6
95
Ø 68

M10

112
117 KS022 - Output shaft
KB022 - Output shaft on both sides
Ø 20 H7

18 20 60/94* 40
Ø 20

Ø 20 k6

6 32 4 40/50 60 60 40/50
Ø 40

22,5

140
DIN332 M6
+5 +5 60/94* 50
18 0 20 0
Ø 25 k6

70

8 40 5
28

Ø9
28

140 90
Ø 20 h6

Ø 20 h6

112
DIN332 M10

Motor fr.
63 71 80 L80 90S/L
Dimension
AC 126 141 159 159 178
AD 128 136 145 145 155
k 399 433 441 465 483
kB 443 482 499 523 556
LB 204 238 246 270 288
LB1 248 287 304 328 361

Motor dimension sheets see page 590. Description of motor lengths LB and LB1 see page 594. *Design KS(KB)/KF

460 WG20 Gear Units and Geared Motors www.weg.net

KO022 - B5 flange execution with hollow shaft

kB
k
63 131,5 LB1
LB 58,5+121) 60 34

Ø9 15,5

36
Ø 13

Ø AC
0

Ø 110 j6
Z

Ø 160
Z

Ø 58
Ø 75
45°

3,5
4 x 90° 3,5
34
10
1)
incl. hollow shaft protection cap

KF022 - KP022 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc
K
58,5 94 94 60 34
Ø 110 j6

Ø 110 j6
Ø 160

Ø 160
3,5 3,5
10 10

KT022 - Hollow shaft with torque arm ** KU022 - Hollow shaft with
shrink disc and torque arm **

270°
45°
4x

6 6

21,5 21,5
180° Side B Side A
110

17 17

R2
63 1 35 35
Ø 12

Ø 12

90° 38 38

Torque arm possible positions:

90 °, 135 °, 180 °, 225 °, 270 °

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 461

 KH033 - Hollow shaft

kB
k
63 158 LB1 AD
15 LB 58,5+9 1)
60

Ø 10
0

Ø 85
Ø AC

115
171
100 -0,5

12

32
60°

Ø 11
M8 x 16 100
6x

Ø 75 H7
28 Ø 11 115
110 117

4
117
1)
incl. hollow shaft protection cap

33,3 48 42

KD033 - Shrink disc

K

Ø 45
8
M10 x 40 105

Ø 30 H7
96,5 60 120

Ø 30 h6
89
Ø 85

M10

115
117
KS033 - Output shaft
KB033 - Output shaft on both sides
Ø 30 H7

24 20
Ø 30
Ø 45

60/85* 50 50 60 60 50
Ø 25 k6

146 8 40 5

+5 +5
24 0 20 0
28

115

DIN332 M10
32

146
Ø 30 h6

Ø 30 h6

Ø 11

100
115

Motor fr.
63 71 80 L80 90S/L 100L L100L
Dimension
AC 126 141 159 159 178 199 199
AD 128 136 145 145 155 165 165
k 425 459 467 491 509 559 597
kB 469 508 525 549 582 643 681
LB 204 238 246 270 288 338 376
LB1 248 287 304 328 361 422 460

Motor dimension sheets see page 590. Description of motor lengths LB and LB1 see page 594. *Design KS(KB)/KF

462 WG20 Gear Units and Geared Motors www.weg.net

KO033 - B5 flange execution with hollow shaft

kB
k
63 158 LB1 58,5+91) 60 25
Ø9 LB 97

Ø 13
0

Ø 110 j6
Z Z

Ø 160
Ø 66
Ø AC
12
45°

3,5 3,5
4 x 90°
25 10

1)
incl. hollow shaft protection cap

KF033 - KP033 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc
K

58,5 85 50 96,5 60 25
Ø 110 j6

Ø 110 j6
Ø 160
Ø 160

3,5 3,5
10 10

KT033 - Hollow shaft with torque arm ** KU033 - Hollow shaft with
shrink disc and torque arm **

270°
0°
6x3

6 6

21,5 21,5
180° Side B Side A
160

17 17

R2
1
Ø 12

Ø 12

63 35 35
90° 38 38

Torque arm possible positions:

90 °, 120 °, 150 °, 180 °, 210 °, 240 °, 270 °, 300 °

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 463

 KH043 - Hollow shaft

kB
k
71 175,5 LB1 AD
18 LB 72+9 1)
75

Ø 100

Ø 85
Ø AC

130
192
112 -0,5

6,4

37

Ø 11
M8 x 16 60° 120
6x

Ø 80 H7
35 Ø 11 141
130 144

4
1)
incl. hollow shaft protection cap
144
38,3 55 36

KD043 - Shrink disc

Ø 50
K
10
M12 x 50 132

Ø 35 H7
110 75 150

Ø 35 h6
114
Ø 85

M12

141
144
KS043 - Output shaft
KB043 - Output shaft on both sides
Ø 35 H7

24 20
Ø 35
Ø 50

60 75 75 60
75/100* 60
Ø 30 k6

8 50 5
177
+5 +5
24 0 20 0
33

130

DIN332 M10
37

Ø 11

177
Ø 35 h6
Ø 35 h6

120
141

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M
Dimension
AC 126 141 159 159 178 199 199 221
AD 128 136 145 145 155 165 165 185
k 451 485 493 517 535 585 623 595
kB 495 534 551 575 608 669 707 682
LB 204 238 246 270 288 338 376 348
LB1 248 287 304 328 361 422 460 435

Motor dimension sheets see page 590. Description of motor lengths LB and LB1 see page 594. *Design KS(KB)/KF

464 WG20 Gear Units and Geared Motors www.weg.net

KO043 - B5 flange execution with hollow shaft

kB
k
71 175,5 LB1 72+91) 75 25
Ø 11 LB 109
20

Ø1
65

Ø 130 j6
Z

Ø 200
Z

Ø 66
Ø 82
Ø AC
6,4
45°

3,5 3,5
4 x 90°
25 12

1)
incl. hollow shaft protection cap

KF043 - KP043 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc
K

72 100 60 110 75 25
Ø 130 j6

Ø 130 j6
Ø 200

Ø 200
3,5 3,5
12 12

KT043 - Hollow shaft with torque arm ** KU043 - Hollow shaft with
shrink disc and torque arm **

270°
0°
6x3

6 6

20 20
180° Side B Side A
160

17 17

R2
71 1
35 35
Ø 12
Ø 12

90° 38 38

Torque arm possible positions:

60 °, 90 °, 120 °, 150 °, 180 °, 210 °, 240 °, 270 °, 300 °

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 465

 KH053 - Hollow shaft

kB
k
80 186 LB1 AD
19 LB 80+9 1)
83

Ø 12
0

Ø 87
Ø AC

150
223
132 -0,5

11,3

45

Ø 13,5
M12 x 24 60° 130

Ø 90 H7
6x
30 Ø 14 157

130 160

4,5
160 1)
incl. hollow shaft protection cap

43,3 60 46

KD053 - Shrink disc

Ø 55
K
12
M16 x 50 142

Ø 40 H7
124,5 83 166

Ø 40 h6
132
Ø 87

M16

157
160
KS053 - Output shaft
KB053 - Output shaft on both sides
Ø 40 H7

24 20
Ø 40
Ø 55

70 84 84 70
84/106,5* 70
Ø 35 k6

193 10 56 7

+5 +5
24 0 20 0
38

150

DIN332 M12
45

Ø 13,5

193
Ø 40 h6

Ø 40 h6

130
157

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M
Dimension
AC 126 141 159 159 178 199 199 221 261 261
AD 128 136 145 145 155 165 165 185 205 205
k 470 504 512 536 554 604 642 614 679 717
kB 514 553 570 594 627 688 726 701 797 835
LB 204 238 246 270 288 338 376 348 413 451
LB1 248 287 304 328 361 422 460 435 531 569

Motor dimension sheets see page 590. Description of motor lengths LB and LB1 see page 594. *Design KS(KB)/KF

466 WG20 Gear Units and Geared Motors www.weg.net

KO053 - B5 flange execution with hollow shaft

kB
k
80 186 LB1 80+91) 83 23,5
Ø 13,5 LB 125

Ø2
15

Ø 180 j6
Z

Ø 250
Z

Ø 79
Ø AC
11,3
45°

4
4 x 90° 4
23,5
15

1)
incl. hollow shaft protection cap

KF053 - KP053 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc
K
80 106,5 70 124,5 83 23,5
Ø 180 j6

Ø 180 j6
Ø 250

Ø 250
4 4
15 15

KT053 - Hollow shaft with torque arm ** KU053 - Hollow shaft with
shrink disc and torque arm **

270°
0°
6x3

8 8

20 20
180° Side B Side A
200

15 15

R2
9
Ø 16

Ø 16

80 50 50
90° 54 54

Torque arm possible positions:

90 °, 120 °, 150 °, 180 °, 210 °, 240 °, 270 °, 300 °

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 467

 KH063 - Hollow shaft

kB
k
90 170 LB1 AD
24 LB 86+11 1)
90
23,7

Ø 12
0

Ø 97
Ø AC
229,5

160
140 -0,5

45

Ø 13,5
M12 x 18 45°
7x 140

Ø 90 H7
30 Ø 14 170
120 172

5
172 1)
incl. hollow shaft protection cap

43,3 65 47

KD063 - Shrink disc

Ø 55
K
12
M16 x 50 156

Ø 40 H7
130,5 90 180

Ø 40 h6
146
Ø 97

M16

170
172
KS063 - Output shaft
Ø 40 H7

KB063 - Output shaft on both sides

Ø 40

25 20
Ø 55

91/126* 80 80 91 91 80
Ø 40 k6

208 12 70 5

+5 +5
25 0 20 0
43

160

DIN332 M16
45

208
Ø 40 h6
Ø 40 h6

Ø 13,5

140
170

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M
Dimension
AC 126 141 159 159 178 199 199 221 261 261
AD 128 136 145 145 155 165 165 185 205 205
k 464 498 506 530 548 598 636 608 673 711
kB 508 547 564 588 621 682 720 695 791 829
LB 204 238 246 270 288 338 376 348 413 451
LB1 248 287 304 328 361 422 460 435 531 569

Motor dimension sheets see page 590. Description of motor lengths LB and LB1 see page 594. *Design KS(KB)/KF

468 WG20 Gear Units and Geared Motors www.weg.net

KO063 - B5 flange execution with hollow shaft

kB
k
90 170 LB1 86+111) 90 36
Ø 13,5 LB 128

23,7
Ø2
15

Ø 180 j6
Z

Ø 250
Z

Ø 78
Ø AC
45°

4
4
4 x 90° 36
15

1)
incl. hollow shaft protection cap

KF063 - KP063 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc
K

86 126 80 130,5 90 36
Ø 180 j6

Ø 180 j6
Ø 250

Ø 250
4 4
15 15

KT063 - Hollow shaft with torque arm ** KU063 - Hollow shaft with
shrink disc and torque arm **

Side B Side A
200

R2
9
Ø 16,4

Ø 16,4

45 25 25
54 54
60 60

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 469

 KH073 - Hollow shaft

kB
k
112 199,5 LB1 AD
27 LB 101+10,51) 105

28,2

Ø 140

Ø 117
Ø AC

200
282,5
180 -0,5

55

Ø 18
45°

Ø 110 H7
M12 x 18 165
7x
40 Ø 18 196
150 202

8
202
1)
incl. hollow shaft protection cap

53,8 75 53
KD073 - Shrink disc
K

Ø 70
M16 x 50
14
149,5 105 183

Ø 50 H7
210

Ø 50 h6
176
Ø 117

M16
Ø 18

196
202
KS073 - Output shaft
Ø 50 H7

KB073 - Output shaft on both sides

Ø 50

31 30
Ø 70

106/142* 100 100 106 106 100

Ø 50 k6

14 80 10
241
53,5

+5 +5
31 0 30 0
200

DIN332 M16
55

241
Ø 18
Ø 50 h6

Ø 50 h6

165
196

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L
Dimension
AC 126 141 159 159 178 199 199 221 261 261 329 329
AD 128 136 145 145 155 165 165 185 205 205 266 266
k 516 550 558 582 600 650 688 660 725 763 857 901
kB 560 599 616 640 673 734 772 747 843 881 981 1025
LB 204 238 246 270 288 338 376 348 413 451 545 589
LB1 248 287 304 328 361 422 460 435 531 569 669 713

Motor dimension sheets see page 590. Gear unit size K07 corresponds to motor flange FR-200.
Description of motor lengths LB and LB1 see page 594. *Design KS(KB)/KF

470 WG20 Gear Units and Geared Motors www.weg.net

KO073 - B5 flange execution with hollow shaft

kB
k
112 199,5 LB1 101+10,51) 105 37
Ø 14 LB 164

28,2
Ø2
65

Ø 230 j6
Z Z

Ø 300
Ø 98
Ø AC
45°

4
37 4
4 x 90°
16

1)
incl. hollow shaft protection cap

KF073 - KP073 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc
K

101 142 100 149,5 105 37

Ø 230 j6

Ø 230 j6
Ø 300

Ø 300
4 4
16 16

KT073 - Hollow shaft with torque arm ** KU073 - Hollow shaft with
shrink disc and torque arm **

Side B Side A
250

R2
52,5 9 25 25
Ø 16,4

Ø 16,4

54 54
60 60

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 471

 KH083 - Hollow shaft

kB
k
132 258 LB1 AD
28 25,8 LB 116+111) 120

Ø17
0

Ø 136
Ø AC

233
343
212 -0,5

70

Ø 22
45°
7x 180

Ø 140 H7
M16 x 24
55 Ø 22 230
180 232

4
1)
incl. hollow shaft protection cap
232

64,4 80 49

KD083 - Shrink disc

Ø 90
K

18
170,5 120

Ø 60 H7
M20 x 70 210
240

Ø 60 h6
188
Ø 168

M20
Ø 22

230
232

KS083 - Output shaft

41 30 KB083 - Output shaft on both sides
Ø 65
Ø 65 H7

Ø 90

120/150* 120 120 120 120 120

Ø 60 m6

18 110 5
281

+5 +5
41 0 30 0
64

233

DIN332 M20
70

Ø 22

281
Ø 65 h6

Ø 65 h6

180
230

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L 180M 180L
Dimension
AC 126 141 159 159 178 199 199 221 261 261 329 329 347 347
AD 128 136 145 145 155 165 165 185 205 205 266 266 281 281
k 594 628 636 660 678 728 766 738 803 841 925 969 993 1031
kB 638 677 694 718 751 812 850 825 921 959 1049 1093 1111 1149
LB 204 238 246 270 288 338 376 348 413 451 535 579 603 641
LB1 248 287 304 328 361 422 460 435 531 569 659 703 721 759

Motor dimension sheets see page 590. Gear unit size K083 corresponds to motor flange FR-300.
Description of motor lengths LB and LB1 see page 594. *Design KS(KB)/KF

472 WG20 Gear Units and Geared Motors www.weg.net

KO083 - B5 flange execution with hollow shaft

kB
k
132 258 LB1 116+111) 120 30
Ø 17,5 LB 190
27,5

25,8
Ø3
00

Ø 250 j6
Z

Ø 102
Ø 137

Ø 350
Z

Ø AC
45°

5
4 x 90° 30 5
18,5

1)
incl. hollow shaft protection cap

KF083 - KP083 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc
K

116 150 120 170,5 120 30

Ø 250 j6
Ø 250 j6
Ø 350

Ø 350
5 5
18,5 18,5

KT083 - Hollow shaft with torque arm ** KU083 - Hollow shaft with
shrink disc and torque arm **

Side B Side A
300

60 30 30
R4

Ø 25

Ø 25

69 69
2

80 80

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 473

 KH084 - Hollow shaft

kB
k
132 343 LB1 AD
28 24,2 LB 116+111) 120

Ø17
0

Ø AC

Ø 136
233
343
212 -0,5

70

Ø 22
45°
7x 180

Ø 140 H7
M16 x 24
55 Ø 22 230
180 232

4
1)
incl. hollow shaft protection cap
232

64,4 80 49

KD084 - Shrink disc

Ø 90
K

18
170,5 120

Ø 60 H7
M20 x 70 210
240

Ø 60 h6
188
Ø 168

M20
Ø 22

230
232

KS084 - Output shaft

41 30
KB084 - Output shaft on both sides
Ø 65
Ø 65 H7

Ø 90

120/150* 120 120 120 120 120

Ø 60 m6

18 110 5
281

+5 +5
41 0 30 0
64

233

DIN332 M20
70

Ø 22

281
Ø 65 h6

Ø 65 h6

180
230

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M
Dimension
AC 126 141 159 159 178 199 199 221 261 261
AD 128 136 145 145 155 165 165 185 205 205
k 679 713 721 745 763 813 851 823 888 926
kB 723 762 779 803 836 897 935 910 1006 1044
LB 204 238 246 270 288 338 376 348 413 451
LB1 248 287 304 328 361 422 460 435 531 569

Motor dimension sheets see page 590. Description of motor lengths LB and LB1 see page 594. *Design KS(KB)/KF

474 WG20 Gear Units and Geared Motors www.weg.net

KO084 - B5 flange execution with hollow shaft

kB
k
132 343 LB1 116+111) 120 30
Ø 17,5 LB 190
27,5

24,2
Ø3
00

Ø 250 j6
Ø AC

Ø 102
Ø 137
Z Z

Ø 350
45°

5
4 x 90° 30 5
18,5

1)
incl. hollow shaft protection cap

KF084 - KP084 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc
K

116 150 120 170,5 120 30

Ø 250 j6
Ø 250 j6
Ø 350

Ø 350
5 5
18,5 18,5

KT084 - Hollow shaft with torque arm ** KU084 - Hollow shaft with
shrink disc and torque arm **

Side B Side A
300

60 30 30
R4

Ø 25

Ø 25

69 69
2

80 80

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 475

 KH093 - Hollow shaft

kB
k
160 278 LB1 AD
36 29,7 LB 146+111) 150

Ø180

Ø 136
Ø AC

295
420
265 -1

75

Ø 26
45°

Ø 145 H7
7x 240
M16 x 24 75 Ø 26 290
240 292

5,5
292
1)
incl. hollow shaft protection cap

74,9 100 61

KD093 - Shrink disc

K

Ø 95
M20 x 70

20
207,5 150 270

Ø 70 H7
300

Ø 70 h6
248
Ø 183

M20
Ø 26

290
292

KS093 - Output shaft

55 40 KB093 - Output shaft on both sides
Ø 75
Ø 75 H7

Ø 95

150/192* 140 140 150 150 140

Ø 70 m6

20 125 7,5
345
+5 +5
74,5

55 0 40 0
295

DIN332 M20
75

Ø 26

345
Ø 75 h6

Ø 75 h6

240
290

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L 180M 180L 200L
Dimension
AC 126 141 159 159 178 199 199 221 261 261 329 329 347 347 386
AD 128 136 145 145 155 165 165 185 205 205 266 266 281 281 317
k 642 676 684 708 726 776 814 786 851 889 973 1017 1041 1079 1171
kB 686 725 742 766 799 860 898 873 969 1007 1097 1141 1159 1197 1297
LB 204 238 246 270 288 338 376 348 413 451 535 579 603 641 733
LB1 248 287 304 328 361 422 460 435 531 569 659 703 721 759 859

Motor dimension sheets see page 590. Gear unit size K093 corresponds to motor flange FR-300.
Description of motor lengths LB and LB1 see page 594. *Design KS(KB)/KF

476 WG20 Gear Units and Geared Motors www.weg.net

KO093 - B5 flange execution with hollow shaft

kB
k
160 278 LB1 146+111) 150 42
Ø 17,5 LB 252
31

29,7
Ø4
00

Ø 350 h6
Ø 450
Ø 145
Ø 112
Z
Z

Ø AC
22,5°
8

5
x
45

42
°

5
22

1)
incl. hollow shaft protection cap

KF093 - KP093 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc
K

146 192 140 207,5 150 42

Ø 350 h6
Ø 350 h6
Ø 450

Ø 450
5 5
22 22

KT093 - Hollow shaft with torque arm ** KU093 - Hollow shaft with
shrink disc and torque arm **

Side B Side A
350

70 40 40
R4

Ø 25

Ø 25
1

88,5 88,5
100 100

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 477

 KH094 - Hollow shaft

kB
k
160 363 LB1 AD
36 20,3 LB 146+111) 150

Ø180

Ø AC

Ø 136
295
420
265 -1

75

Ø 26
45°

Ø 145 H7
7x 240
M16 x 24 75 Ø 26 290
240 292

5,5
292
1)
incl. hollow shaft protection cap

74,9 100 61
KD094 - Shrink disc

Ø 95
M20 x 70

20
207,5 150 270

Ø 70 H7
300

Ø 70 h6
248
Ø 183

M20
Ø 26

290
292

KS094 - Output shaft

55 40 KB094 - Output shaft on both sides
Ø 75
Ø 75 H7

Ø 95

150/192* 140 140 150 150 140

Ø 70 m6

20 125 7,5
345
+5 +5
74,5

55 0 40 0
295

DIN332 M20
75

Ø 26

345
Ø 75 h6

Ø 75 h6

240
290

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M
Dimension
AC 126 141 159 159 178 199 199 221 261 261
AD 128 136 145 145 155 165 165 185 205 205
k 727 761 769 793 811 861 899 871 936 974
kB 771 810 827 851 884 945 983 958 1054 1092
LB 204 238 246 270 288 338 376 348 413 451
LB1 248 287 304 328 361 422 460 435 531 569

Motor dimension sheets see page 590. Description of motor lengths LB and LB1 see page 594. *Design KS(KB)/KF

478 WG20 Gear Units and Geared Motors www.weg.net

KO094 - B5 flange execution with hollow shaft

kB
k
160 363 LB1 146+111) 150 42
Ø 17,5 LB 31 252

20,3
Ø4
00

Ø 350 h6
Ø AC

Ø 450
Ø 145
Ø 112
Z Z
22,5°
8

5
x
45

42
°

5
22

1)
incl. hollow shaft protection cap

KF094 - KP094 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc
K

146 192 140 207,5 150 42

Ø 350 h6
Ø 350 h6
Ø 450

Ø 450
5 5
22 22

KT094 - Hollow shaft with torque arm ** KU094 - Hollow shaft with
shrink disc and torque arm **

Side B Side A
350

70 40 40
R4

Ø 25

Ø 25
1

88,5 88,5
100 100

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 479

 KH103 - Hollow shaft

kB
k
200 341,5 LB1 AD
40 LB 172,5+12,5 1)
175

Ø2
30 49,6

Ø 192
Ø AC

360
508
315 -1

95

Ø 33
45°

Ø 180 H7
8x 270
M20 x 30
340
95 Ø 33
345
280
95,4 15,5 1)
incl. hollow shaft protection cap
345
120 82
KD103 - Shrink disc

Ø 120
25
K
M24 x 80 313

Ø 90 H7
244 175
350

Ø 90 h6
287
Ø 196

DIN332 M24
Ø 33

340
345
KS103 - Output shaft
KB103 - Output shaft on both sides
65 60
Ø 95

170 177 177 170

Ø 90 m6

177/216* 170
Ø 95 H7

Ø 120

25 160 5

405
95

+5 +5
65 0 60 0
360

DIN332 M24
95

405
Ø 33
Ø 95 h6
Ø 95 h6

270
340

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L 180M 180L 200L 225S/M
Dimension
AC - - - - - - - 221 261 261 329 329 347 347 386 453
AD - - - - - - - 185 205 205 266 266 281 281 317 385
k - - - - - - - 890 955 993 1064 1108 1132 1170 1262 1370
kB - - - - - - - 977 1073 1111 1188 1232 1250 1288 1388 1488
LB - - - - - - - 348 413 451 522 566 590 628 720 828
LB1 - - - - - - - 435 531 569 646 690 708 746 846 946

Motor dimension sheets see page 590. Gear unit size K103 corresponds to motor flange FR-400.
Description of motor lengths LB and LB1 see page 594. *Design KS(KB)/KF

480 WG20 Gear Units and Geared Motors www.weg.net

KO103 - B5 flange execution with hollow shaft

kB
k
200 341,5 LB1 172,5+12,51) 175 41
Ø 19,5 LB 290

49,6
25,5
Ø
40
0

Ø 350 h6
Ø 179

Ø 450
Ø 131
Z Z

Ø AC
22,5°

5
8

41
x
45

5
°

22
1)
incl. hollow shaft protection cap

KF103 - KP103 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc
K

172,5 216 170 244 175 41

Ø 350 h6

Ø 350 h6
Ø 450

Ø 450
5 5
22 22

KT103 - Hollow shaft with torque arm ** KU103 - Hollow shaft with
shrink disc and torque arm **

Side B Side A
450

R3
74 7 44 44
Ø 25
Ø 25

92,4 92,4
100 100

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 481

 KH104 - Hollow shaft

kB
k
200 418 LB1 AD
40 LB 172,5+12,5 1)
175

Ø2
30 1,3

Ø 192
Ø AC

360
508
315 -1

95

Ø 33
45°

Ø 180 H7
8x 270
M20 x 30
340
95 Ø 33
345
280
15,5 1)
incl. hollow shaft protection cap
345
95,4 120 82
KD104 - Shrink disc

Ø 120
K
25
M24 x 80 313

Ø 90 H7
244 175
350

Ø 90 h6
287
Ø 196

DIN332 M24
Ø 33

340
345
KS104 - Output shaft
KB104 - Output shaft on both sides
65 60
Ø 95

170 177 177 170

Ø 90 m6

177/216* 170
Ø 95 H7

Ø 120

25 160 5

405
95

+5 +5
65 0 60 0
360

DIN332 M24
95

405
Ø 33
Ø 95 h6
Ø 95 h6

270
340

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L
Dimension
AC 126 141 159 159 178 199 199 221 261 261 329 329
AD 128 136 145 145 155 165 165 185 205 205 266 266
k 822 856 864 888 906 956 994 966 1031 1069 1163 1207
kB 866 905 922 946 979 1040 1078 1053 1149 1187 1287 1331
LB 204 238 246 270 288 338 376 348 413 451 545 589
LB1 248 287 304 328 361 422 460 435 531 569 669 713

Motor dimension sheets see page 590. Gear unit size K104 corresponds to motor flange FR-200.
Description of motor lengths LB and LB1 see page 594. *Design KS(KB)/KF

482 WG20 Gear Units and Geared Motors www.weg.net

KO104 - B5 flange execution with hollow shaft

kB
k
200 418 LB1 172,5+12,51) 175 41
Ø 19,5 LB 290
25,5

1,3
Ø
40
0

Ø 350 h6
Ø 450
Ø 179
Ø 131
Z Z

Ø AC
22,5°

5
8

41
x
45

5
°

22
1)
incl. hollow shaft protection cap

KF104 - KP104 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc
K

172,5 216 170 244 175 41

Ø 350 h6

Ø 350 h6
Ø 450

Ø 450
5 5
22 22

KT104 - Hollow shaft with torque arm ** KU104 - Hollow shaft with
shrink disc and torque arm **

Side B Side A
450

R3
74 7 44 44
Ø 25
Ø 25

92,4 92,4
100 100

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 483

 KH123 - Hollow shaft

kB
k
225 391 LB1 AD
45 LB 202,5+14,51) 205

51,2
Ø2
50

Ø 219
Ø AC

420
597
375 -1

110

Ø 39
45°

Ø 210 H7
M24 x 36 8x 330
115 Ø 39 400
350 405

8
1)
incl. hollow shaft protection cap

405
KD123 - Shrink disc 106,4 140 94

Ø 140
K 297 205
M24 x 80

28
373

Ø 100 H7
410

Ø 100 h6
Ø 223

347

DIN332 M24
Ø 39

400
405
KS123 - Output shaft
KB123 - Output shaft on both sides
Ø 105

85 60
Ø 105 H7

210 207 207 210

Ø 110 m6
Ø 140

207/256* 210
28 180 15
485
116

+5 +5
420

85 0 60 0
DIN332 M24
110

485
Ø 105 h6

Ø 105 h6

Ø 39

330
400

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L 180M 180L 200L 225S/M
Dimension
AC - - - - - - - 221 261 261 329 329 347 347 386 453
AD - - - - - - - 185 205 205 266 266 281 281 317 385
k - - - - - - - 964 1029 1067 1138 1182 1206 1244 1336 1444
kB - - - - - - - 1051 1147 1185 1262 1306 1324 1362 1462 1562
LB - - - - - - - 348 413 451 522 566 590 628 720 828
LB1 - - - - - - - 435 531 569 646 690 708 746 846 946

Motor dimension sheets see page 590. Gear unit size K123 corresponds to motor flange FR-400.
Description of motor lengths LB and LB1 see page 594. *Design KS(KB)/KF

484 WG20 Gear Units and Geared Motors www.weg.net

KO123 - B5 flange execution with hollow shaft

kB
k
225 391 LB1
Ø19,5 LB 202,5+14,51) 205 51

51,2
33,5
Ø5
00

Ø 450 h6
Ø 198

Ø 550
Ø 149
Z Z

Ø AC
22,5°

5
8

51
x
45
°

5
25
1)
incl. hollow shaft protection cap

KF123 - KP123 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc
K

202,5 256 210 297 205 51

Ø 450 h6
Ø 450 h6
Ø 550

Ø 550
5 5
25 25

KT123 - Hollow shaft with torque arm ** KU123 - Hollow shaft with
shrink disc and torque arm **

Side B Side A
550

R7
60 6, 7 7
Ø 40

Ø 40

5
108 108
120 120

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 485

 KH124 - Hollow shaft

kB
k
225 467 LB1 AD
45 LB 202,5+14,51) 205

0,02
Ø2
50

Ø 219
Ø AC

420
597
375 -1

110

Ø 39
45°

Ø 210 H7
M24 x 36 8x 330
115 Ø 39 400
350 405

8
1)
incl. hollow shaft protection cap

405
KD124 - Shrink disc 106,4 140 94

Ø 140
K 297 205 M24 x 80

28
373

Ø 100 H7
410

Ø 100 h6
Ø 223

347

DIN332 M24
Ø 39

400
405
KS124 - Output shaft
KB124 - Output shaft on both sides
Ø 105

85 60
Ø 105 H7

210 207 207 210

Ø 110 m6
Ø 140

207/256* 210
28 180 15
485
116

+5 +5
420

85 0 60 0
DIN332 M24
110

485
Ø 105 h6

Ø 105 h6

Ø 39

330
400

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L
Dimension
AC 126 141 159 159 178 199 199 221 261 261 329 329
AD 128 136 145 145 155 165 165 185 205 205 266 266
k 896 930 938 962 980 1030 1068 1040 1105 1143 1237 1281
kB 940 979 996 1020 1053 1114 1152 1127 1223 1261 1361 1405
LB 204 238 246 270 288 338 376 348 413 451 545 589
LB1 248 287 304 328 361 422 460 435 531 569 669 713

Motor dimension sheets see page 590. Gear unit size K124 corresponds to motor flange FR-200.
Description of motor lengths LB and LB1 see page 594. *Design KS(KB)/KF

486 WG20 Gear Units and Geared Motors www.weg.net

KO124 - B5 flange execution with hollow shaft

kB
k
225 467 LB1
Ø19,5 LB 202,5+14,51) 205 51

0,02
33,5
Ø5
00

Ø 450 h6
Ø 198

Ø 550
Ø 149
Z

Ø AC
Z
22,5°

5
8

51
x
45
°

5
25
1)
incl. hollow shaft protection cap

KF124 - KP124 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc
K

202,5 256 210 297 205 51

Ø 450 h6
Ø 450 h6
Ø 550

Ø 550
5 5
25 25

KT124 - Hollow shaft with torque arm ** KU124 - Hollow shaft with
shrink disc and torque arm **

Side B Side A
550

R7
60 6, 7 7
Ø 40

Ø 40

5
108 108
120 120

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 487

 KH153 - Hollow shaft

kB
k
280 427 LB1 AD
50 LB 245+16,5 1)
250

Ø 30 66,1
0

Ø 160
Ø AC

500
713
450 -1

130

Ø 39
45°

Ø 240 H7
M24 x 36 8x 420
140 Ø 39 490
380 500
18,5 1)
incl. hollow shaft protection cap
490
KD153 - Shrink disc 127,4 160 129

Ø 160
350,5 250

32
M24 x 80 460

Ø 120 H7
500

Ø 120 h6
Ø 274

434

DIN332 M24
Ø 39

490
500
KS153 - Output shaft
Ø 125

90 40
KB153 - Output shaft on both sides
Ø 125 H7

Ø 160

Ø 120 m6

210 247 247 210

247/310* 210

580 32 200 5
127

+5 +5
90 0 40 0
500

DIN332 M24
130

580
Ø 39
Ø 125 h6

Ø 125 h6

420
500

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L 180M 180L 200L 225S/M 280S/M
Dimension
AC - - - - - - - - - - 329 329 347 347 386 453 599
AD - - - - - - - - - - 266 266 281 281 317 385 472
k - - - - - - - - - - 1213 1257 1281 1319 1411 1519 1680
kB - - - - - - - - - - 1337 1381 1399 1437 1537 1637 1773
LB - - - - - - - - - - 506 550 574 612 704 812 973
LB1 - - - - - - - - - - 630 674 692 730 830 930 1066

Motor dimension sheets see page 590. Gear unit size K153 corresponds to motor flange FR-550.
Description of motor lengths LB and LB1 see page 594. *Design KS(KB)/KF

488 WG20 Gear Units and Geared Motors www.weg.net

KO153 - B5 flange execution with hollow shaft

kB
k
280 427 LB1
Ø 22 LB 245+16,51) 250 60
47

66,1
Ø6
00

Ø 550 h6
Ø 660
Z

Ø 214
Ø 181
Z

Ø AC
22,5°

6
8
x

60
45
°

6
28
1)
incl. hollow shaft protection cap

KF153 - KP153 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc
K

245 310 210 350,5 250 60

Ø 550 h6

Ø 550 h6
Ø 660

Ø 660
6 6
28 28

KT153 - Hollow shaft with torque arm ** KU153 - Hollow shaft with
shrink disc and torque arm **

Side B Side A
700

R7
50 6, 2 2
Ø 40

5
Ø 40

108 108
120 120

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 489

 KH154 - Hollow shaft

kB
k
280 514 LB1 AD
50 LB 245+16,5 1)
250

Ø 30 1
0

Ø 160
Ø AC

500
713
450 -1

130

Ø 39
45°

Ø 240 H7
M24 x 36 8x 420
140 Ø 39 490
380 500
18,5 1)
incl. hollow shaft protection cap
490
KD154 - Shrink disc 127,4 160 129

Ø 160
350,5 250

32
M24 x 80 460

Ø 120 H7
500

Ø 120 h6
Ø 274

434

DIN332 M24
Ø 39

490
500
KS154 - Output shaft
Ø 125

90 40
KB154 - Output shaft on both sides
Ø 125 H7

Ø 160

Ø 120 m6

210 247 247 210

247/310* 210

580 32 200 5
127

+5 +5
90 0 40 0
500

DIN332 M24
130

580
Ø 39
Ø 125 h6

Ø 125 h6

420
500

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M 160M 160L 180M 180L 200L
Dimension
AC 126 141 159 159 178 199 199 221 261 261 329 329 347 347 386
AD 128 136 145 145 155 165 165 185 205 205 266 266 281 281 317
k 998 1032 1040 1064 1082 1132 1170 1142 1207 1245 1329 1373 1397 1435 1527
kB 1042 1081 1098 1122 1155 1216 1254 1229 1325 1363 1453 1497 1515 1553 1653
LB 204 238 246 270 288 338 376 348 413 451 535 579 603 641 733
LB1 248 287 304 328 361 422 460 435 531 569 659 703 721 759 859

Motor dimension sheets see page 590. Gear unit size K154 corresponds to motor flange FR-300.
Description of motor lengths LB and LB1 see page 594. *Design KS(KB)/KF

490 WG20 Gear Units and Geared Motors www.weg.net

KO154 - B5 flange execution with hollow shaft

kB
k
280 514 LB1
Ø 22 LB 245+16,51) 250 60
47

1
Ø6
00

Ø 550 h6
Ø 660
Z

Ø AC

Ø 214
Ø 181
Z
22,5°

6
8
x

60
45
°

6
28
1)
incl. hollow shaft protection cap

KF154 - KP154 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc
K

245 310 210 350,5 250 60

Ø 550 h6

Ø 550 h6
Ø 660

Ø 660
6 6
28 28

KT154 - Hollow shaft with torque arm ** KU154 - Hollow shaft with
shrink disc and torque arm **

Side B Side A
700

R7
50 6, 2 2
Ø 40

5
Ø 40

108 108
120 120

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 491

 KH155 - Hollow shaft

kB
k
280 599 LB1 AD
50 LB 245+16,5 1)
250

Ø 30 34,5
0

Ø AC

Ø 160
500
713
450 -1

130

Ø 39
45°

Ø 240 H7
M24 x 36 8x 420
140 Ø 39 490
380 500
18,5 1)
incl. hollow shaft protection cap
490
KD155 - Shrink disc 127,4 160 129

Ø 160
350,5 250

32
M24 x 80 460

Ø 120 H7
500

Ø 120 h6
Ø 274

434

DIN332 M24
Ø 39

490
500
KS155 - Output shaft
Ø 125

90 40
KB155 - Output shaft on both sides
Ø 125 H7

Ø 160

Ø 120 m6

210 247 247 210

247/310* 210

580 32 200 5
127

+5 +5
90 0 40 0
500

DIN332 M24
130

580
Ø 39
Ø 125 h6

Ø 125 h6

420
500

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M
Dimension
AC 126 141 159 159 178 199 199 221 261 261
AD 128 136 145 145 155 165 165 185 205 205
k 1083 1117 1125 1149 1167 1217 1255 1227 1292 1330
kB 1127 1166 1183 1207 1240 1301 1339 1314 1410 1448
LB 204 238 246 270 288 338 376 348 413 451
LB1 248 287 304 328 361 422 460 435 531 569

Motor dimension sheets see page 590. Description of motor lengths LB and LB1 see page 594. *Design KS(KB)/KF

492 WG20 Gear Units and Geared Motors www.weg.net

KO155 - B5 flange execution with hollow shaft

kB
k
280 599 LB1
Ø 22 LB 245+16,51) 250 60
47

34,5
Ø6
00

Ø 550 h6
Ø AC

Ø 660
Z

Ø 214
Ø 181
Z
22,5°

6
8
x

60
45
°

6
28
1)
incl. hollow shaft protection cap

KF155 - KP155 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc
K

245 310 210 350,5 250 60

Ø 550 h6

Ø 550 h6
Ø 660

Ø 660
6 6
28 28

KT155 - Hollow shaft with torque arm ** KU155 - Hollow shaft with
shrink disc and torque arm **

Side B Side A
700

R7
50 6, 2 2
Ø 40

5
Ø 40

108 108
120 120

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 493

K

494 WG20 Gear Units and Geared Motors www.weg.net

Dimension sheets Input types

K
www.weg.net WG20 Gear Units and Geared Motors 495
 IEC Adapter I63 to I280

l
la

m f

Ød
Ø n H7

ga
p
Ød

t α1 s
E
α

Type I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 I225 I250 I280

K p
n
154
95
154
110
200
130
200
130
250
180
250
180
300
230
350
250
350
250
400
300
450
350
550
450
550
450
la 22.5 10 13 13 15 20 15 35 35 20 20 20 20
m 115 130 165 165 215 215 265 300 300 350 400 500 500
t 4.5 4.5 4.5 4.5 5 5 5 5 5 5.5 5 5 5
s M8x16 M8x10 11 11 13.5 13.5 13.5 17.5 17.5 17.5 17.5 17.5 17.5
α 90 90 90 90 90 90 90 90 90 90 45 45 45
α1 35 45 45 45 45 45 45 45 45 45 45 45 45
d 11 14 19 24 28 28 38 42 48 55 60 65 75
f 4 5 6 8 8 8 10 12 14 16 18 18 20
ga 12.8 16.3 21.8 27.3 31.3 31.3 41.3 45.3 51.8 59.3 64.4 69.4 79.9
E 1) 25 32 43 47.5 63 100 85.5 111.5 111.5 114.5 140 146 146
1) Maximum motor shaft length for motors with key

I63 I71 I80 I90 I100 I112 I132 I160 I180 I200 I225 I250 I280
Getriebe-
größe
l
K02 163.5 163.5 191.5 191.5 222.5 - - - - - - - -
K03 190 190 218 218 249 - - - - - - - -
K04 207.5 207.5 235.5 235.5 266.5 319.5 330.5 - - - - - -
K05 218 218 246 246 277 330 341 - - - - - -
K06 202.5 202.5 230.5 230.5 261.5 314.5 325.5 411.5 411.5 - - - -
K07 232.5 232.5 260.5 260.5 291.5 344.5 355.5 441.5 441.5 - - - -
K083 281.5 281.5 309.5 309.5 340.5 393.5 404.5 489 489 517.5 547.5 - -
K084 365 365 393 393 424 477 488 - - - - - -
K093 301.5 301.5 329.5 329.5 360.5 413.5 424.5 509 509 537.5 567.5 - -
K094 385 385 413 413 444 497 508 - - - - - -
K103 - - - - - 467.5 478.5 560.5 560.5 589 619 713 713
K104 450.5 450.5 478.5 478.5 509.5 562.5 573.5 659.5 659.5 - - - -
K123 - - - - - 516.5 527.5 609.5 609.5 638 668 762 762
K124 499.5 499.5 527.5 527.5 558.5 611.5 622.5 708.5 708.5 - - - -
K153 - - - - - - - 629.5 629.5 658 688 782 782
K154 537.5 537.5 565.5 565.5 596.5 649.5 660.5 745.5 745.5 774 804 - -
K155 621 621 649 649 680 733 744 - - - - - -

Dimensions in mm.

496 WG20 Gear Units and Geared Motors www.weg.net

NEMA Adapter N56 to N364

l
la

m f

Ød
Ø n H7

ga
p
Ød

t α1 s
E
α

Type N56 N143/145 N182 N184 N213/215 N254/256 N284/286 N324/326 N364

p
n
170
114.3
170
114.3
250
215.9
250
215.9
300
215.9
225
215.9
280
266.7
350
317.5
400
317.5
K
la 13 13 10 16.8 10 30 35 15 15
m 149.225 149.225 184.15 184.15 184.15 184.15 228.6 279.4 279.4
t 4.5 4.5 5 3.2 5 5 3 5 5
s 11 11 14 14 14 14 14 16 16
α 90 90 90 90 90 90 90 90 90
α1 45 45 45 45 45 45 45 45 45
d 15.875 22.225 28.575 28.575 34.925 41.275 47.625 53.975 60.325
f 4.775 4.775 6.350 6.350 7.950 9.525 12.700 12.700 15.875
ga 18.008 24.486 31.521 31.521 38.557 45.618 53.238 59.690 67.335
E 55 55 67.5 96.8 80.5 105.5 111.5 109.5 109.5
1) Maximum motor shaft length for motors with key

N56 N143/145 N182 N184 N213/215 N254/256 N284/286 N324/326 N364

Gear unit
size
l
K02 191.5 191.5 222.5 - - - - - -
K03 218 218 249 - - - - - -
K04 235.5 235.5 266.5 319.5 330.5 - - - -
K05 246 246 277 330 341 - - - -
K06 230.5 230.5 261.5 314.5 325.5 411.5 414.5 - -
K07 260.5 260.5 291.5 344.5 355.5 441.5 444.5 - -
K083 309.5 309.5 340.5 393.5 404.5 489 492 539.5 555
K084 393 393 424 477 488 - - - -
K093 329.5 329.5 360.5 413.5 424.5 509 512 559.5 575
K094 413 413 444 497 508 - - - -
K103 - - - 467.5 478.5 560.5 563.5 611 626.5
K104 478.5 478.5 509.5 562.5 573.5 659.5 662.5 - -
K123 - - - 516.5 527.5 609.5 612.5 660 675.5
K124 527.5 527.5 558.5 611.5 622.5 708.5 711.5 - 695.5
K153 - - - - - 629.5 632.5 695.5 695.5
K154 565.5 565.5 596.5 649.5 660.5 745.5 784.5 796 811.5
K155 649 649 680 733 744 - - - -

www.weg.net WG20 Gear Units and Geared Motors 497

 SERVO Adapter S92 to S190

Shaft with key

f
l
la

ga
m

Ød
Ød

Ø n H7
p
Smooth shaft

t
α1 s
E

α Ød

Typ S92 S105 S114 S115 S130 S141 S142 S180 S189 S190

K p
n
101
80
144
95
144
95
144
110
144
110
144
110
144
130
197
114,3
197
130
197
180
la 17,5 31 31 31 31 31 31 35 32 38
m 100 115 130 130 145 165 165 200 215 215
t 6,5 6,5 6,5 6,5 6,5 6,5 6,5 6,5 6,5 6,5
s M6x12 M8x16 M8x16 M8x16 M8x16 M8x16 M8x16 13,5 15 15
α 90° 90° 90° 90° 90° 90° 90° 90° 90° 90°
α1 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°
d 1) 14 16 19 19 19 24 19 24 19 22 24 28 24 24 32 35 32 38 38
f 5 5 6 6 6 8 6 8 6 6 8 8 8 8 10 10 10 10 10
ga 16,3 18,3 21,8 21,8 21,8 27,3 21,8 27,3 21,8 24,8 27,3 31,3 27,3 27,3 35,3 38,3 35,3 41,3 41,3
E 2) 46 46 34 67 67 54 67 54 76 63 63 63 54 63 63 66 74 60 87
E 3) 46 46 46 67 67 67 67 67 76 76 76 63 67 76 63 87 74 60 87
1) Other shaft diameters on request
2) Maximum motor shaft length for motors with key
3) Maximum motor shaft length for motors with smooth shaft

S92 S105 S114 S115 S130 S141 S142 S180 S189 S190
Gear unit
size
l
K02 229 277 277 277 277 277 277 - - -
K03 255.5 303.5 303.5 303.5 303.5 303.5 303.5 - - -
K04 273 321 321 321 321 321 321 391.5 385.5 412.5
K05 283.5 331.5 331.5 331.5 331.5 331.5 331.5 402 396 423
K06 268 316 316 316 316 316 316 386.5 380.5 407.5
K07 298 346 346 346 346 346 346 416.5 410.5 437.5
K083 347 395 395 395 395 395 395 465.5 459.5 486.5
K084 430.5 478.5 478.5 478.5 478.5 478.5 478.5 549 543 570
K093 367 415 415 415 415 415 415 485.5 479.5 506.5
K094 450.5 498.5 498.5 498.5 498.5 498.5 498.5 569 563 590
K103 - - - - - - - 539.5 533.5 560.5
K104 516 564 564 564 564 564 564 634.5 628.5 655.5
K123 - - - - - - - 588.5 582.5 609.5
K124 565 613 613 613 613 613 613 683.5 677.5 704.5
K153 - - - - - - - - - -
K154 603 651 651 651 651 651 651 721.5 715.5 742.5
K155 686.5 734.5 734.5 734.5 734.5 734.5 734.5 805 799 826

Dimensions in mm.

498 WG20 Gear Units and Geared Motors www.weg.net

Input Unit U2, U3

l
Z X
F

ØD

GA
ØN
E R ØD

Input Unit U5, U6, U7

l
X
F
ØD
ØN

GA
ØD
E
K
R

Input shaft [mm] Input shaft [mm]

28x60
Typ 19x40 24x50 28x60 38x80 42x110 48x110 55x110
19x40 24x50 38x80 48x110 55x110
Gear unit
42x110
U2 U3 U5 U6 U7 size
U2 U3 U5 U6 U7
D 19 24 28 38 42 48 55
F 6 8 8 10 12 14 16 l
GA 21.5 27 31 41 45 51.5 59 K02 191.5 - - - -
E 40 50 60 80 110 110 110 K03 218 - - - -
N 73 101 178 235 290 K04 235.5 267.5 - - -
X 2 2.5 1.9 6.5 4 K05 246 278 - - -
Z 3 35 - - - K06 230.5 262.5 305 - -
R M6 M10 M10 M12 M16 M16 M20 K07 260.5 292.5 335 - -
K083 309.5 341.5 382.5 404.5 -
K084 393 425 - - -
Tolerances K093 329.5 361.5 402.5 424.5 -
Dimension name ISO tolerance DIN EN ISO 286-2 K094 413 445 - - -
K103 - 415.5 454 476 545
< Ø 55 mm k6
D K104 478.5 510.5 553 - -
≥ Ø 55 mm m6 K123 - 464.5 503 525 594
K124 527.5 559.5 602 - -
K153 - - 523 545 614
K154 565.5 597.5 639 661 -
K155 649 681 - - -

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 499

K

500 WG20 Gear Units and Geared Motors www.weg.net

Helical worm gears and
Helical worm geared motors S

S
 Technical data
Size S03 S04 S05 S06 S07
Power [kW] 0.12 - 1.5 0.12 - 2.2 0.12 - 3.0 0.12 - 7.5 0.12 - 9.2
Torque [Nm] 130 230 490 1000 1600
5.17 6.92 9.33 7.07 9.68
Ratio - - - - -
275.50 323.70 370.50 351.00 460.00
Number of stages 2 2 2 2 2
Housing material aluminium cast iron
Type with key acc. to DIN 6885.1 and threaded bore acc. to DIN 332 sheet 2
Solid
Tolerance < Ø 55: k6
shaft
Material standard: C45E (1.1191) / stainless steel on request
Type with key acc. to DIN 6885.1/ with shrink disc
Hollow
Tolerance H7
shaft
Material standard: C45E (1.1191) / stainless steel on request
Tolerance centring ≤ 230: j6
Flanges
Material cast iron
Gear Type honed - designed and produced according to DIN 3990/3991 - Q7
wheels Material 16MnCr5 (1.7131) case hardened – minimum 58HRC / 20MnCr5
Schne-
Material Nickel-Bronze (CuSn12Ni2-C - GC)
ckenrad
Shaft Type type AS acc. to DIN 3760
seals Material standard NBR / special FKM
Bearing standard / reinforced
Type standard CLP PG ISO VG 460
Lubricants
Quantity depending on mounting position
acc. to DIN 747: ≤ 50: -0.4; > 50 bis ≤ 250: -0.5; > 250: -1
Axle height
for foot-mounted geard motors, the motor may extend below the mounting surface

S
General information
1. Nameplate

h
WG20 WEG Gear Systems GmbH MADE IN i
2753 Markt Piesting, Austria AUSTRIA
www.weg-gears.net 20APR24 j
a SH072-11P-90S/L-04F-TH-TF SN: 24D01367 k
Mat.: l
b P1 1.1 kW rpm 8.1 @ 50 Hz m
c M2 1017 Nm i 180.40 n
d fB 1.5 M1 o
e Oil 2.18l-ISO VG 460 CLP p
f 66.7 kg q

a Type code j Production date

b Motor power k Serial number

c Output torque l Material number

d Service factor m Output speed and Frequency

e Type and quantity of lubricant n Total gear ratio

f Weight o Mounting position

g Space for ATEX code (if applicable) p QR-Code linked online to additional information

h Manufacturer address q Space for additional information

i Country of origin

502 WG20 Gear Units and Geared Motors www.weg.net

2. Type code

SH072-EX-11P-90S/L-04E ...
1 2 3 4 5 6 7 8 9 10

SH072-EX-I90-HT
1 2 3 4 5 11 12

1 Type: S = Helical worm gear unit

2 Design: B = Output shaft on both sides

D = Hollow shaft with shrink disc
F = B5 flange type with output shaft
H = Hollow shaft
O = B5 flange type with hollow shaft
P = B5 flange type with hollow shaft and shrink disc
S = Output shaft
T = Hollow shaft with torque arm
U = Hollow shaft with shrink disc and torque arm

3 Size: 03 04 05 06 07

4 Number of stages: 2 = 2 gear stages

5 ATEX execution: when operated in explosive atmospheres, see page 15

S
6 Motor type: 14P = Integral motor aluminium IE3
11P = Integral motor aluminium IE3

7 Motor frame size: 63 71 80 90S/L 100L L100L 112M 132S L132M

8 Number of poles: 04 = 4 poles 06 = 6 poles

9 Power indicator: D E F G

10 Motor modules: see from page 595

11 Adapters, Input unit: IEC adapter I63 I71 I80 I90 I100 I112 I132

NEMA adapter N56 N143 N182 N184 N213

SERVO adapter S92 S105 S114 S115 S130

S141 S142 S180 S189 S190

Input unit U2 U3

IEC63 IEC71
Direct mounting (IEC): IEC80 IEC90 IEC100 IEC112 IEC132

12 High/Low temperature execution: HT LT

Type code Motor see page 565

www.weg.net WG20 Gear Units and Geared Motors 503

 3. Range

Size S03 S04 S05 S06 S07

Housing material Aluminium Cast iron

4. Design

B D F H

O P S T

B5 flange type with hollow shaft

S B Output shaft on both sides P and shrink disc
D Hollow shaft with shrink disc S Output shaft

F B5 flange type with output shaft T Hollow shaft with torque arm
Hollow shaft with shrink disc
H Hollow shaft U and torque arm
U O B5 flange type with hollow shaft

5. Venting the gear unit

The helical worm gear unit sizes S03 to S05 are neither equipped with a venting nor an oil drain screw.
They are supplied with lifetime-lubrication. a
By default, the helical worm gear unit sizes S06 and S07 are equipped with venting screws with a
safety strap for transportation (see illustration). The rubber strap (a) of the venting screw must be
removed entirely before the initial startup. The venting screw is placed accordingly to the mounting
position (see chapter Mounting positions, page 507)

6. Overhung and axial loads

The overhung loads (FrN) indicated in the respective selection tables apply to gear units with the force acting on the
shaft center (x=l/2). The permissible overhung loads listed are based on the least favourable loading direction
and calculated for standard shafts and standard bearings. Other load directions and action can be calculated with
equations Q1 to Q3. If transmission elements are placed on the output shaft, an appropriate factor (fz) has to
be taken into consideration when determining the overhung load.

Gear wheels Sprockets V-belts Flat belts

fz=1.1 fz=1.2 fz=1.1

fz=1.8 fz=2.5
(z≤17) (z≤13) (z>13)

504 WG20 Gear Units and Geared Motors www.weg.net

 Use the following equations Q1 and Q2 to calculate the permissible radial loads on the output shaft. Q3 is to calculate
the real existing shaft loads for your application. The results are to be compared by using the equation Q4.

Variable Unit Description

Q1 FzL = FrN · a1 a1 Load action factor - output shaft bearing from Table 1
a2 Load action factor - output shaft from Table 1
d0 [m] Effective diameter of the transmission element
Q2 FzW = FW · a2 Geared motor output torque (from selection tables)
M2 [Nm]
or required calculated output torque

FzL [N] Permissible overhung load for output shaft bearings

2 · M2
Q3 FQvorh = d0
· fz FzW [N] Permissible overhung load for output shaft
FrN [N] Permissible overhung load from selection tables

Permissible overhung load -

FW [N]
FQvorh ≤ FzL Output shaft x=l/2 from Table 2

FQvorh [N] Existing overhung load at gear shaft

Q4 fz Factor for transmission element

FQvorh ≤ FzW Mmax [Nm]

Highest possible output torque
for coupling operation (Table 2)

Always use both equations Q1 and Q2 for your calculations.

x/l
Output shaft Hollow shaft
l l
0 0.25 0.5 0.75 1 1.5 2
x x
a1 → Equation Q1

S
Ød

1.39 1.18 1.00 0.85 0.73 0.52 0.38

Fr Fr
a 2 → Equation Q2

2.00 2.00 1.00 0.55 0.38 0.23 0.17

Table 1: Load action factors a1, a2

Intermediate values can be interpolated linearly. Combined load (Fr ≠ 0; Fa = 0) on request.

Output shaft Output torque M2 [Nm]

[mm] Mmax
130 230 460 1000 1600
at Fr = 0
Ød l F w [kN] at x/l = 0.5 → Equation Q2

20 40 160 2.2

25 50 300 5.5 4.3

30 60 500 7.5 6.9 3.7

35 70 800 11.0 9.6
40 80 1170 13.0 8.6

45 90 1650 18.0 16.0

50 100 2250 24.0 23.0 20.0

Table 2: Permissible overhung load - output shaft x = l/2

The axial loads (FaN) for the respective execution (output shaft or hollow shaft), given in the following selection tables,
are valid at radial force FrN = 0. If there are axial loads or radial and axial components acting on the drive which are
extraordinarily high, we recommend to contact the manufacturer.

www.weg.net WG20 Gear Units and Geared Motors 505

 7. Mounting positions, Position of the terminal box and Cable entry

Mounting positions - Sizes S03 to S05

Gear units S03 to S05 are not ventilated and supplied with lifetime lubrication

Reference area

M1

M6 M2

M4 M5

M3

Position of the terminal box Cable entry Side indication

Standard: Position 1 Standard: Position I

2
I III
III
III
I

1 3 II IV
B A
I
III I
III I
4

506 WG20 Gear Units and Geared Motors www.weg.net

 Mounting positions - Sizes S06 to S07

Venting screw Position visible on this side

Oil drain screw Position covered or on the

far side of the gear unit
Reference area

M1

M6 M2

M4 M5

M3

Position of the terminal box Cable entry Side indication

Standard: Position 1 Standard: Position I

2
I III
III
III
I

1 3 II IV
B A
I
III I
III I
4

www.weg.net WG20 Gear Units and Geared Motors 507

 8. Efficiency rating
Our helical worm gear units achieve efficiency ratings of up to 96 %.
With new gearboxes, the worm gear set has to run in, the friction is initially higher than after running in. The efficiency before
running-in is therefore lower than it will be afterwards. This effect increases with smaller lead angles, i.e. with larger gear
reductions. The calculated efficiency rating given in the catalogue can therefore only serve as a guide value.
If efficiency and selflocking are particularly crucial to the function of your application, the manufacturer should be consulted,
stating all relevant operational constraints.

The following reductions in efficiency can be expected during the running-in phase: 1 gear: up to 12 %
2 or 3 gears: up to 3 %
4 to 6 gears: bis zu 2 %

The gear unit is completely run in after about 24 hours of rated operation. To achieve the values given in the tables (see page 531)
it is important to fulfil the following requirements:

▪ Gear unit completely run in

▪ Steady-state temperature reached
▪ Lubricant in accordance with the stated specifications
▪ Operation of the gear unit at rated torque

The maximum surface temperature of the housing should not exceed 80 °C.

508 WG20 Gear Units and Geared Motors www.weg.net

Selection tables - Geared motors
The technical data of the geared motors shown in the selection tables apply to an ambient temperature of +20 °C.

The selection tables are calculated with following motor data:

Power (IEC frame size) Motor series (IE class)

up to 0.55 kW (63 - 80) 14P (IE3) - aluminium

0.75 - 9.2 kW (80 - 132) 11P (IE3) - aluminium

Structure of the selection tables

1 2

PN = 0.12 kW IE3
50 Hz 60 Hz at 50 Hz

0.12 kW 0.14 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min -1
min -1
Nm kN kN kg

3 4 5 6 7 8 9 10 11 12

1 Rated power of the motor

2 Given values are based on the respective efficiency class

3 Output speed at 50 Hz

4 Output speed at 60 Hz

5 Output torque

6 Service factor

7 Total ratio

8 Permissible radial load at midpoint of the shaft (standard bearing) at axial load=0

9 Permissible axial load at radial load=0

10 Geared motor type

11 Weight

12 Page refererence for dimension sheet

*) Increased rated power at 60 Hz can only be reached together with increased voltage within the wide range
(for details see page 574).
Increased rated power

1.2 x PN

www.weg.net WG20 Gear Units and Geared Motors 509

 PN = 0.12 kW IE3
50 Hz 60 Hz at 50 Hz

0.12 kW 0.14 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
2.5 3.1 283 1.75 370.50 5.2 17.5
3.1 3.8 237 2.00 302.25 5.7 17.6
SH052-14P-63-06F 16 548
3.8 4.7 195 2.45 241.09 6.0 17.6
5.0 6.1 156 3.00 186.64 6.3 17.7
3.8 4.6 197 2.50 370.50 6.0 17.6
SH052-14P-63-04E 16 548
4.6 5.7 165 2.90 302.25 6.2 17.7
2.9 3.5 247 0.95 323.70 2.5 10.2
3.5 4.3 206 1.10 263.25 3.5 10.3
4.4 5.4 168 1.35 209.18 4.1 10.4
5.7 7.1 134 1.65 161.57 4.5 10.5
7.2 8.8 110 1.90 129.00 4.7 10.5 SH042-14P-63-06F 12 546
9.5 12 86 2.15 97.50 4.8 10.6
10 12 94 2.30 91.30 4.8 10.0
12 15 78 2.75 74.25 4.9 10.2
16 20 53 2.85 57.65 5.0 10.7
4.3 5.3 172 1.35 323.70 4.0 10.4
5.3 6.5 143 1.60 263.25 4.4 10.4
6.7 8.2 117 1.90 209.18 4.6 10.5 SH042-14P-63-04E 12 546
8.7 11 93 2.35 161.57 4.8 10.6
11 13 76 2.75 129.00 4.9 10.6
5.3 6.6 142 0.90 174.00 ** 2.3
6.7 8.3 115 1.05 137.09 1.8 2.4
8.8 11 92 1.35 105.64 2.4 2.4
11 14 74 1.60 82.54 2.7 2.5
12 15 80 1.35 76.00 2.6 1.8
S 15 18 57 2.00 61.63 2.9 2.6
16 19 63 1.80 59.20 2.8 2.0 SH032-14P-63-06F 11 544
19 24 51 2.15 48.00 2.9 2.2
20 25 44 2.45 46.40 3.0 2.6
22 27 46 1.35 41.80 2.9 1.8
24 30 41 2.65 37.82 3.0 2.3
27 33 33 3.00 34.04 3.0 2.6
28 35 36 2.80 32.56 3.0 2.0
5.1 6.2 148 0.90 275.50 ** 2.3
6.5 8.0 119 1.10 214.60 1.7 2.4
8.1 9.9 99 1.30 174.00 2.2 2.4
10 13 80 1.55 137.09 2.6 2.5
13 16 63 1.90 105.64 2.8 2.5
17 21 51 2.30 82.54 2.9 2.6
18 23 53 2.05 76.00 2.9 2.1
23 28 39 2.90 61.63 3.0 2.6
24 29 42 2.65 59.20 3.0 2.3
29 36 35 3.20 48.00 3.0 2.4
30 37 30 3.55 46.40 3.0 2.7
34 41 31 2.05 41.80 3.0 2.1
37 45 28 3.95 37.82 3.1 2.4
SH032-14P-63-04E 10 544
41 51 22 4.40 34.04 3.1 2.7
43 53 24 4.20 32.56 3.1 2.3
48 59 21 4.90 29.14 3.1 2.5
53 65 20 5.10 26.40 3.1 2.3
62 76 17 6.10 22.77 3.1 2.6
68 83 16 6.40 20.80 3.1 2.4
83 101 13 7.70 17.00 3.1 2.6
88 107 12 7.95 16.03 3.1 2.5
110 134 10 9.65 12.80 3.1 2.6
112 137 10 9.80 12.52 3.1 2.6
150 184 7 12.50 9.35 3.1 2.6
200 244 5 15.60 7.04 3.1 2.6
272 333 4 19.45 5.17 3.1 2.7

Legend see page 509 ** ... on request

510 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.18 kW IE3
50 Hz 60 Hz at 50 Hz

0.18 kW 0.22 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
2.0 2.4 595 2.70 460.00 17.2 28.8 SH072-14P-71-06E 59 552
2.6 3.2 449 2.25 351.00 9.7 26.8
SH062-14P-71-06E 37 550
3.2 4.0 366 2.70 278.18 10.1 26.9
2.4 3.0 437 1.15 370.50 1.7 17.2
3.0 3.7 365 1.30 302.25 3.9 17.3
3.7 4.6 300 1.60 241.09 5.0 17.4
4.8 5.9 240 1.95 186.64 5.7 17.6
SH052-14P-71-06E 19 548
6.0 7.4 198 2.30 150.00 6.0 17.6
7.9 9.7 156 2.80 114.56 6.3 17.7
11 13 141 2.25 85.50 6.4 17.0
12 15 126 2.25 76.00 6.4 17.0
3.7 4.6 301 1.65 370.50 5.0 17.4
4.6 5.6 252 1.90 302.25 5.5 17.5
SH052-14P-63-04F 16 548
5.7 7.1 207 2.30 241.09 5.9 17.6
7.4 9.1 165 2.80 186.64 6.2 17.7
4.3 5.3 260 0.90 209.18 2.1 10.2
5.6 6.9 207 1.10 161.57 3.5 10.3
7.0 8.6 170 1.25 129.00 4.1 10.4
9.2 11 133 1.40 97.50 4.5 10.5
9.9 12 146 1.50 91.30 4.3 9.6
12 15 120 1.80 74.25 4.6 9.8 SH042-14P-71-06E 15 546
15 19 96 2.20 59.00 4.8 10.0
16 19 82 1.85 57.65 4.8 10.6
18 22 84 2.15 49.80 4.8 9.5
20 24 75 2.75 45.57 4.9 10.2
22 27 69 2.65 40.50 4.9 9.8 S
4.3 5.3 262 0.90 323.70 2.0 10.2
5.2 6.5 219 1.05 263.25 3.2 10.3
6.6 8.1 179 1.25 209.18 3.9 10.4
8.5 11 143 1.55 161.57 4.4 10.4
11 13 117 1.80 129.00 4.6 10.5 SH042-14P-63-04F 12 546
14 17 91 2.05 97.50 4.8 10.6
15 19 97 2.20 91.30 4.8 10.0
19 23 80 2.65 74.25 4.9 10.1
24 29 56 2.70 57.65 5.0 10.7
8.5 11 141 0.85 105.64 ** 2.3
11 13 114 1.05 82.54 1.8 2.4
12 15 123 0.90 76.00 1.5 1.4
15 18 88 1.30 61.63 2.4 2.5
19 24 68 1.60 46.40 2.7 2.5
22 27 71 0.90 41.80 2.7 1.3
24 29 63 1.75 37.82 2.8 2.0 SH032-14P-71-06E 13 544
26 33 51 1.95 34.04 2.9 2.6
28 34 56 1.85 32.56 2.9 1.6
31 38 49 2.15 29.14 2.9 2.2
34 42 46 2.25 26.40 2.9 1.8
40 49 39 2.65 22.77 3.0 2.3
43 53 36 2.80 20.80 3.0 2.0

Legend see page 509 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 511

 PN = 0.18 kW IE3
50 Hz 60 Hz at 50 Hz

0.18 kW 0.22 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
7.9 9.8 151 0.85 174.00 ** 2.3
10 12 122 1.00 137.09 1.5 2.3
13 16 97 1.25 105.64 2.3 2.4
17 21 78 1.50 82.54 2.6 2.5
18 22 82 1.35 76.00 2.5 1.8
22 28 59 1.90 61.63 2.8 2.6
23 29 64 1.75 59.20 2.8 2.0
29 35 53 2.10 48.00 2.9 2.2
30 37 46 2.35 46.40 2.9 2.6
33 41 47 1.35 41.80 2.9 1.8
36 45 42 2.60 37.82 3.0 2.3
41 50 34 2.90 34.04 3.0 2.6
42 52 37 2.75 32.56 3.0 2.0 SH032-14P-63-04F 11 544
47 58 33 3.25 29.14 3.0 2.4
52 64 30 3.35 26.40 3.0 2.1
61 75 26 4.00 22.77 3.1 2.5
66 82 24 4.20 20.80 3.1 2.3
81 100 19 5.05 17.00 3.1 2.5
86 106 19 5.20 16.03 3.1 2.4
108 133 15 6.35 12.80 3.1 2.6
110 136 15 6.45 12.52 3.1 2.5
147 181 11 7.90 9.39 3.1 2.6
148 182 11 8.20 9.35 3.1 2.5
196 241 8 10.25 7.04 3.1 2.6
267 329 6 12.75 5.17 3.1 2.6
S

Legend see page 509 ** ... on request

512 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.25 kW IE3
50 Hz 60 Hz at 50 Hz

0.25 kW 0.33 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
2.1 2.6 779 2.10 460.00 16.6 28.5
2.7 3.3 619 2.50 355.14 17.1 28.7 SH072-14P-80-06D 60 552
3.2 4.0 530 2.90 297.85 17.4 28.8
3.0 3.7 566 2.85 460.00 17.3 28.8 SH072-14P-71-04E 58 552
2.7 3.4 588 1.70 351.00 8.7 26.6
3.4 4.3 479 2.05 278.18 9.5 26.8
4.4 5.5 383 2.50 216.00 10.0 26.9
SH062-14P-80-06D 38 550
5.4 6.7 321 2.95 177.23 10.3 27.0
5.9 7.4 326 2.85 160.88 10.2 26.4
15 19 144 2.85 63.38 10.7 26.3
3.9 4.8 428 2.35 351.00 9.8 26.8
SH062-14P-71-04E 36 550
5.0 6.1 349 2.85 278.18 10.2 27.0
2.6 3.2 572 0.90 370.50 ** 16.9
3.2 3.9 478 1.00 302.25 ** 17.1
4.0 4.9 393 1.20 241.09 3.3 17.3
5.1 6.4 314 1.50 186.64 4.8 17.4
6.4 7.9 260 1.75 150.00 5.5 17.5
SH052-14P-80-06D 19 548
8.3 10 205 2.15 114.56 6.0 17.6
11 14 161 2.60 87.75 6.2 17.7
13 16 165 1.75 76.00 6.2 16.6
14 17 132 2.80 69.52 6.4 17.8
15 19 136 2.65 62.00 6.4 16.9
3.7 4.6 419 1.20 370.50 2.5 17.2
4.6 5.6 351 1.35 302.25 4.2 17.3
5.7 7.1 288 1.65 241.09 5.2 17.5
7.4 9.1 230 2.05 186.64 5.8 17.6
SH052-14P-71-04E 17 548
S
9.2 11 189 2.40 150.00 6.1 17.6
12 15 148 3.00 114.56 6.3 17.7
16 20 130 2.50 85.50 6.4 17.0
18 22 116 2.50 76.00 6.5 17.0
5.9 7.3 271 0.85 161.57 1.6 10.1
7.4 9.2 223 0.95 129.00 3.2 10.3
9.8 12 174 1.10 97.50 4.0 10.4
10 13 191 1.15 91.30 3.8 9.2
13 16 157 1.35 74.25 4.2 9.5
16 20 126 1.70 59.00 4.5 9.8
17 21 107 1.40 57.65 4.7 10.5 SH042-14P-80-06D 15 546
19 24 110 1.65 49.80 4.7 9.2
21 26 99 2.10 45.57 4.7 10.0
24 29 90 2.05 40.50 4.8 9.5
26 33 80 2.50 36.38 4.9 10.1
30 37 73 2.55 32.18 4.9 9.7
35 43 61 2.90 27.50 4.9 10.3
6.6 8.1 249 0.90 209.18 2.5 10.2
8.5 11 198 1.15 161.57 3.6 10.3
11 13 162 1.30 129.00 4.2 10.4
14 17 126 1.50 97.50 4.5 10.5
15 19 135 1.60 91.30 4.5 9.7
19 23 111 1.95 74.25 4.7 9.9 SH042-14P-71-04E 13 546
23 29 89 2.35 59.00 4.8 10.1
24 29 78 1.95 57.65 4.9 10.6
28 34 78 2.35 49.80 4.9 9.6
30 37 70 2.95 45.57 4.9 10.2
34 42 64 2.90 40.50 4.9 9.9

Legend see page 509 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 513

 PN = 0.25 kW IE3
50 Hz 60 Hz at 50 Hz

0.25 kW 0.33 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
12 14 149 0.80 82.54 ** 2.3
15 19 115 1.00 61.63 1.8 2.4
16 20 127 0.90 59.20 1.4 1.3
18 22 100 1.10 53.17 2.2 2.4
20 25 104 1.10 48.00 2.1 1.6
21 26 89 1.20 46.40 2.4 2.5
25 31 83 1.35 37.82 2.5 1.8
28 35 67 1.50 34.04 2.7 2.5
SH032-14P-80-06D 14 544
29 36 73 1.40 32.56 2.7 1.3
33 41 64 1.65 29.14 2.8 2.0
36 45 60 1.70 26.40 2.8 1.5
42 52 51 2.05 22.77 2.9 2.2
46 57 47 2.15 20.80 2.9 1.8
56 70 38 2.55 17.00 3.0 2.3
60 74 37 2.65 16.03 3.0 2.0
65 81 33 2.90 14.67 3.0 2.4
13 16 135 0.90 105.64 0.9 2.3
17 21 108 1.10 82.54 2.0 2.4
18 22 113 1.00 76.00 1.8 1.5
22 28 83 1.35 61.63 2.5 2.5
23 29 89 1.25 59.20 2.4 1.7
29 35 73 1.55 48.00 2.7 1.9
30 37 64 1.70 46.40 2.8 2.5
33 41 66 1.00 41.80 2.8 1.4
36 45 58 1.90 37.82 2.8 2.1
S 41 50 47 2.10 34.04 2.9 2.6
42 52 52 2.00 32.56 2.9 1.7
47 58 45 2.35 29.14 3.0 2.2 SH032-14P-71-04E 11 544
52 64 42 2.45 26.40 3.0 1.9
61 75 36 2.90 22.77 3.0 2.3
66 82 33 3.00 20.80 3.0 2.1
81 100 27 3.65 17.00 3.1 2.4
86 106 26 3.75 16.03 3.1 2.2
108 133 20 4.55 12.80 3.1 2.5
110 136 20 4.65 12.52 3.1 2.3
147 181 15 5.70 9.39 3.1 2.6
148 182 15 5.90 9.35 3.1 2.4
196 241 12 7.35 7.04 3.1 2.5
267 329 9 9.20 5.17 3.1 2.6

Legend see page 509 ** ... on request

514 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.37 kW IE3
50 Hz 60 Hz at 50 Hz

0.37 kW 0.44 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
2.0 2.5 1190 1.35 460.00 14.6 28.0
2.6 3.2 946 1.65 355.14 15.9 28.3
3.1 3.8 809 1.90 297.85 16.5 28.5
4.0 4.9 652 2.35 233.75 17.0 28.7 SH072-14P-80-06E 62 552
4.3 5.3 664 2.40 214.32 17.0 27.7
5.1 6.3 517 2.90 180.40 17.4 28.9
5.6 6.9 522 3.00 165.46 17.4 28.1
3.0 3.7 829 1.95 460.00 16.4 28.5
3.9 4.8 659 2.35 355.14 17.0 28.7 SH072-14P-71-04F 59 552
4.7 5.7 563 2.70 297.85 17.3 28.8
2.6 3.2 898 1.15 351.00 4.4 26.1
3.3 4.1 732 1.35 278.18 7.2 26.4
4.3 5.3 585 1.65 216.00 8.7 26.6
5.2 6.4 491 1.95 177.23 9.4 26.7
5.7 7.1 498 1.85 160.88 9.4 25.9
SH062-14P-80-06E 40 550
6.7 8.3 391 2.35 137.25 10.0 26.9
7.3 8.9 401 2.40 127.50 9.9 26.2
8.9 11 305 2.85 104.40 10.3 27.0
9.3 12 317 2.95 99.00 10.3 26.5
15 18 220 1.85 63.38 10.6 25.7
4.0 4.9 627 1.60 351.00 8.4 26.5
5.0 6.1 511 1.95 278.18 9.3 26.7
6.5 7.9 407 2.35 216.00 9.9 26.9
SH062-14P-71-04F 36 550
7.9 9.6 341 2.80 177.23 10.2 27.0
8.7 11 340 2.80 160.88 10.2 26.4
22 27 147 2.80 63.38 10.7 26.3 S
3.8 4.7 600 0.80 241.09 ** 16.9
5.0 6.1 480 1.00 186.64 ** 17.1
6.2 7.6 397 1.15 150.00 3.2 17.3
8.1 10 313 1.40 114.56 4.8 17.4
11 13 247 1.70 87.75 5.6 17.5
12 15 252 1.15 76.00 5.6 15.9
SH052-14P-80-06E 21 548
13 16 201 1.85 69.52 6.0 17.6
15 18 207 1.75 62.00 5.9 16.3
17 20 186 2.20 55.64 6.1 16.6
19 23 167 2.60 49.45 6.2 16.6
20 25 137 2.40 45.50 6.4 17.7
21 26 146 2.70 43.07 6.3 16.9
3.8 4.6 613 0.80 370.50 ** 16.9
4.6 5.7 513 0.95 302.25 ** 17.0
5.8 7.1 421 1.15 241.09 2.4 17.2
7.5 9.2 336 1.40 186.64 4.5 17.4
9.3 11 277 1.65 150.00 5.3 17.5
SH052-14P-71-04F 18 548
12 15 217 2.05 114.56 5.9 17.6
16 19 170 2.45 87.75 6.2 17.7
18 23 170 1.70 76.00 6.2 16.6
20 25 137 2.70 69.52 6.4 17.7
23 28 140 2.60 62.00 6.4 16.8

Legend see page 509 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 515

 PN = 0.37 kW IE3
50 Hz 60 Hz at 50 Hz

0.37 kW 0.44 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
12 15 240 0.90 74.25 2.7 8.8
16 19 193 1.10 59.00 3.7 9.2
19 23 169 1.10 49.80 4.1 8.3
20 25 151 1.40 45.57 4.3 9.6
21 25 129 1.10 45.00 4.5 10.5
23 28 138 1.35 40.50 4.4 8.7
25 31 122 1.65 36.38 4.6 9.8
SH042-14P-80-06E 17 546
29 35 111 1.70 32.18 4.7 9.2
34 41 93 1.90 27.50 4.8 10.0
37 46 86 2.15 24.86 4.8 9.5
44 55 72 2.25 20.90 4.9 10.2
47 57 70 2.60 19.85 4.9 9.8
57 70 56 2.60 16.26 5.0 10.3
73 90 44 3.00 12.69 5.0 10.4
8.6 11 290 0.80 161.57 ** 10.1
11 13 238 0.90 129.00 2.8 10.2
14 18 185 1.00 97.50 3.9 10.3
15 19 198 1.10 91.30 3.6 9.2
19 23 163 1.30 74.25 4.2 9.5
24 29 131 1.60 59.00 4.5 9.7
SH042-14P-71-04F 14 546
28 34 114 1.60 49.80 4.6 9.1
31 38 102 2.00 45.57 4.7 10.0
34 42 93 2.00 40.50 4.8 9.4
38 47 82 2.45 36.38 4.8 10.1
43 53 75 2.50 32.18 4.9 9.7
S 51 62 63 2.85 27.50 4.9 10.3
20 25 135 0.80 46.40 0.8 2.3
24 30 126 0.90 37.82 1.4 1.3
27 33 102 1.00 34.04 2.1 2.4
28 35 112 0.95 32.56 1.9 0.5
32 39 98 1.10 29.14 2.2 1.6
35 43 91 1.15 26.40 2.4 0.9
41 50 78 1.35 22.77 2.6 1.9
44 55 73 1.40 20.80 2.7 1.3 SH032-14P-80-06E 16 544
54 67 59 1.70 17.00 2.8 2.1
58 71 56 1.75 16.03 2.9 1.6
63 78 51 1.90 14.67 2.9 2.2
72 89 45 2.10 12.80 3.0 2.2
74 91 44 2.15 12.52 3.0 1.8
98 121 33 2.65 9.39 3.0 2.4
99 122 33 2.70 9.35 3.0 2.1
23 28 121 0.95 61.63 1.6 2.3
24 29 131 0.85 59.20 1.1 1.3
29 36 107 1.05 48.00 2.0 1.5
30 37 93 1.15 46.40 2.3 2.4
37 45 85 1.30 37.82 2.5 1.8
41 50 69 1.45 34.04 2.7 2.5
43 53 75 1.35 32.56 2.6 1.2
48 59 67 1.60 29.14 2.7 2.0
53 65 62 1.65 26.40 2.8 1.5
SH032-14P-71-04F 12 544
61 75 52 2.00 22.77 2.9 2.2
67 82 49 2.05 20.80 2.9 1.8
82 101 40 2.50 17.00 3.0 2.3
87 107 38 2.60 16.03 3.0 2.0
109 134 30 3.15 12.80 3.0 2.4
111 137 30 3.20 12.52 3.0 2.1
149 183 22 4.05 9.35 3.1 2.3
198 243 17 5.05 7.04 3.1 2.4
270 331 12 6.30 5.17 3.1 2.5

Legend see page 509 ** ... on request

516 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.55 kW IE3
50 Hz 60 Hz at 50 Hz

0.55 kW 0.66 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
2.1 2.5 1731 0.95 460.00 9.4 27.3
2.7 3.3 1376 1.15 355.14 13.2 27.8
3.2 3.9 1177 1.30 297.85 14.6 28.0
4.0 4.9 949 1.60 233.75 15.9 28.3
4.4 5.4 967 1.65 214.32 15.8 27.0
5.2 6.4 752 2.00 180.40 16.7 28.6
5.7 7.0 759 2.10 165.46 16.7 27.5 SH072-14P-80-06F 63 552
6.3 7.7 634 2.30 149.22 17.1 28.7
6.8 8.3 644 2.40 138.77 17.1 27.8
7.4 9.1 547 2.60 126.92 17.3 28.8
8.6 11 479 2.85 110.00 17.5 28.9
8.7 11 513 2.95 108.91 17.4 28.1
11 13 437 2.35 86.25 17.6 26.7
3.1 3.7 1211 1.35 460.00 14.4 28.0
4.0 4.8 962 1.65 355.14 15.8 28.3
4.8 5.8 822 1.85 297.85 16.4 28.5
6.1 7.4 660 2.30 233.75 17.0 28.7 SH072-14P-80-04E 61 552
6.6 8.0 662 2.40 214.32 17.0 27.8
7.9 9.5 521 2.85 180.40 17.4 28.8
8.6 10 520 3.00 165.46 17.4 28.1
2.7 3.3 1307 0.80 351.00 ** 25.5
3.4 4.2 1065 0.95 278.18 ** 25.9
4.4 5.3 851 1.15 216.00 5.4 26.2
5.3 6.5 714 1.35 177.23 7.4 26.4
5.9 7.2 725 1.30 160.88 7.3 25.1
6.9 8.4 568 1.60 137.25 8.9 26.6 S
7.4 9.1 584 1.65 127.50 8.7 25.6
9.1 11 444 1.95 104.40 9.7 26.8 SH062-14P-80-06F 41 550
9.5 12 461 2.05 99.00 9.6 26.0
11 13 372 2.25 86.09 10.1 26.9
12 14 383 2.40 81.23 10.0 26.2
13 16 310 2.60 70.62 10.3 27.0
15 18 301 2.90 62.91 10.3 26.5
16 19 264 2.90 60.00 10.5 27.1
19 23 255 2.35 50.23 10.5 25.4
4.0 4.9 916 1.10 351.00 3.9 26.1
5.1 6.2 745 1.35 278.18 7.1 26.4
6.6 8.0 595 1.65 216.00 8.6 26.6
8.0 9.7 497 1.90 177.23 9.4 26.7
8.8 11 497 1.90 160.88 9.4 25.9 SH062-14P-80-04E 39 550
10 13 394 2.35 137.25 10.0 26.9
11 13 400 2.40 127.50 9.9 26.2
14 17 315 2.95 99.00 10.3 26.5
22 27 215 1.90 63.38 10.6 25.8
6.3 7.7 577 0.80 150.00 ** 16.9
8.2 10 455 1.00 114.56 ** 17.2
11 13 359 1.15 87.75 4.1 17.3
12 15 366 0.80 76.00 3.9 14.9
14 17 293 1.30 69.52 5.1 17.5
15 19 302 1.20 62.00 5.0 15.5
17 21 271 1.50 55.64 5.3 16.0
SH052-14P-80-06F 23 548
19 23 243 1.80 49.45 5.6 16.0
21 25 200 1.65 45.50 6.0 17.6
22 27 212 1.85 43.07 5.9 16.4
25 30 190 2.20 38.29 6.1 16.4
27 33 172 2.25 34.62 6.2 16.7
31 38 154 2.65 30.77 6.3 16.7
36 44 133 2.80 26.44 6.4 17.0

Legend see page 509 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 517

 PN = 0.55 kW IE3
50 Hz 60 Hz at 50 Hz

0.55 kW 0.66 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
5.9 7.1 615 0.80 241.09 ** 16.9
7.6 9.2 491 0.95 186.64 ** 17.1
9.5 11 404 1.15 150.00 3.0 17.2
12 15 317 1.40 114.56 4.8 17.4
16 20 248 1.70 87.75 5.6 17.5
17 20 278 1.20 85.50 5.3 15.9
19 23 249 1.20 76.00 5.6 15.9 SH052-14P-80-04E 20 548
20 25 200 1.85 69.52 6.0 17.6
23 28 205 1.80 62.00 6.0 16.3
26 31 184 2.20 55.64 6.1 16.6
29 35 165 2.60 49.45 6.2 16.6
31 38 134 2.45 45.50 6.4 17.8
33 40 144 2.75 43.07 6.3 16.9
21 25 220 0.95 45.57 3.2 9.0
23 29 201 0.95 40.50 3.6 7.8
26 32 177 1.15 36.38 4.0 9.3
29 36 161 1.15 32.18 4.2 8.4
34 42 136 1.35 27.50 4.4 9.7
38 46 126 1.50 24.86 4.5 8.9
45 55 104 1.55 20.90 4.7 9.9 SH042-14P-80-06F 19 546
48 58 101 1.80 19.85 4.7 9.3
58 71 82 1.80 16.26 4.8 10.1
63 77 77 2.15 15.00 4.9 9.7
74 91 64 2.05 12.69 4.9 10.3
83 101 59 2.55 11.40 4.9 9.9
S 107 130 46 2.95 8.87 5.0 10.1
19 23 237 0.90 74.25 2.8 8.8
24 29 191 1.10 59.00 3.8 9.2
25 30 166 0.90 57.65 4.1 10.4
29 35 166 1.10 49.80 4.1 8.3
31 38 149 1.40 45.57 4.3 9.6
32 38 132 1.05 45.00 4.5 10.5
35 42 136 1.35 40.50 4.4 8.8
SH042-14P-80-04E 16 546
39 47 120 1.65 36.38 4.6 9.8
44 53 109 1.70 32.18 4.7 9.2
52 63 92 1.95 27.50 4.8 10.0
57 69 85 2.20 24.86 4.8 9.5
68 82 71 2.30 20.90 4.9 10.2
72 87 68 2.70 19.85 4.9 9.8
87 106 55 2.65 16.26 5.0 10.3
36 44 133 0.80 26.40 1.0 0.1
42 51 113 0.95 22.77 1.8 1.5
45 56 106 0.95 20.80 2.1 0.6
56 68 86 1.15 17.00 2.5 1.8
59 72 82 1.20 16.03 2.5 1.1
64 79 74 1.30 14.67 2.6 1.9
SH032-14P-80-06F 17 544
74 90 65 1.45 12.80 2.8 2.0
75 92 65 1.50 12.52 2.8 1.4
101 124 49 1.85 9.35 2.9 1.8
117 143 42 2.10 8.07 3.0 1.9
134 164 37 2.35 7.04 3.0 2.0
183 224 27 2.90 5.17 3.1 2.2

Legend see page 509 ** ... on request

518 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.55 kW IE3
50 Hz 60 Hz at 50 Hz

0.55 kW 0.66 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
31 37 136 0.80 46.40 0.8 2.3
38 45 125 0.90 37.82 1.4 1.3
42 51 101 1.00 34.04 2.2 2.4
44 53 110 0.95 32.56 1.9 0.5
49 59 97 1.10 29.14 2.3 1.6
54 65 90 1.15 26.40 2.4 0.9
62 76 77 1.35 22.77 2.6 1.9
68 83 71 1.45 20.80 2.7 1.3
84 101 58 1.70 17.00 2.8 2.1 SH032-14P-80-04E
15 544
89 107 55 1.80 16.03 2.9 1.6
97 117 50 1.95 14.67 2.9 2.2
111 134 44 2.15 12.80 3.0 2.3
113 137 44 2.20 12.52 3.0 1.9
151 183 32 2.70 9.39 3.0 2.4
152 184 33 2.80 9.35 3.0 2.1
176 213 28 3.10 8.07 3.1 2.2
202 244 25 3.45 7.04 3.1 2.2
275 333 18 4.30 5.17 3.1 2.4

Legend see page 509

www.weg.net WG20 Gear Units and Geared Motors 519

 PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
2.6 3.2 1887 0.85 355.14 6.6 27.1
3.2 3.8 1614 0.95 297.85 10.9 27.5
4.0 4.9 1301 1.20 233.75 13.8 27.9
4.4 5.3 1325 1.20 214.32 13.6 26.0
5.2 6.3 1031 1.45 180.40 15.5 28.2
5.7 6.9 1041 1.50 165.46 15.4 26.8
6.3 7.7 869 1.70 149.22 16.3 28.4
6.8 8.3 883 1.75 138.77 16.2 27.2 SH072-11P-90S/L-06E 69 552
7.4 9.0 750 1.90 126.92 16.7 28.6
8.5 10 657 2.10 110.00 17.0 28.7
8.6 11 704 2.15 108.91 16.9 27.6
10 12 562 2.35 92.89 17.3 28.8
11 14 551 2.65 84.05 17.3 28.0
12 15 473 2.65 76.52 17.5 28.9
14 17 464 2.75 66.59 17.5 26.5
3.1 3.8 1640 1.00 460.00 10.6 27.4
4.0 4.9 1302 1.20 355.14 13.8 27.9
4.8 5.8 1112 1.40 297.85 15.0 28.1
6.1 7.4 894 1.70 233.75 16.1 28.4
6.7 8.1 897 1.75 214.32 16.1 27.1
7.9 9.6 706 2.10 180.40 16.9 28.6 SH072-11P-80-04F 63 552
8.6 11 704 2.25 165.46 16.9 27.6
9.6 12 592 2.45 149.22 17.2 28.8
10 13 594 2.60 138.77 17.2 27.9
11 14 509 2.75 126.92 17.4 28.9
S 17 20 396 2.60 86.25 17.6 27.0
4.4 5.3 1167 0.85 216.00 ** 25.7
5.3 6.5 979 1.00 177.23 0.5 26.0
5.8 7.1 994 0.95 160.88 ** 24.2
6.8 8.3 779 1.20 137.25 6.6 26.3
7.4 9.0 800 1.20 127.50 6.3 24.9
9.0 11 608 1.45 104.40 8.5 26.6
9.5 12 632 1.50 99.00 8.3 25.4
11 13 510 1.65 86.09 9.3 26.7 SH062-11P-90S/L-06E 46 550
12 14 525 1.75 81.23 9.2 25.8
13 16 425 1.90 70.62 9.8 26.9
15 18 413 2.15 62.91 9.9 26.1
16 19 362 2.10 60.00 10.1 26.9
19 23 301 2.40 49.33 10.3 27.0
20 24 318 2.65 47.85 10.3 26.5
24 29 273 2.50 39.00 10.4 25.3
4.1 5.0 1240 0.85 351.00 ** 25.6
5.1 6.3 1009 1.00 278.18 ** 26.0
6.6 8.1 805 1.20 216.00 6.2 26.3
8.1 9.8 674 1.40 177.23 7.9 26.5
8.9 11 673 1.40 160.88 7.9 25.3
10 13 533 1.75 137.25 9.1 26.7
11 14 541 1.75 127.50 9.1 25.7 SH062-11P-80-04F 40 550
14 18 427 2.20 99.00 9.8 26.1
17 20 346 2.45 86.09 10.2 27.0
18 21 354 2.60 81.23 10.1 26.3
20 25 287 2.80 70.62 10.4 27.1
23 27 291 1.40 63.38 10.4 25.1
28 35 233 2.60 50.23 10.6 25.6

** ... on request

520 WG20 Gear Units and Geared Motors www.weg.net

 PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
11 13 492 0.85 87.75 ** 17.1
13 16 461 0.90 69.75 ** 14.6
14 16 401 0.95 69.52 3.1 17.3
15 18 413 0.90 62.00 2.7 14.6
17 21 372 1.10 55.64 3.8 15.2
19 23 333 1.30 49.45 4.5 15.2
21 25 274 1.20 45.50 5.3 17.5
22 27 291 1.35 43.07 5.1 15.8
SH052-11P-90S/L-06E 28 548
25 30 261 1.65 38.29 5.5 15.8
27 33 236 1.65 34.62 5.7 16.2
31 37 212 1.95 30.77 5.9 16.2
36 43 182 2.05 26.44 6.1 16.6
40 49 163 2.40 23.50 6.2 16.6
46 57 141 2.50 20.25 6.4 17.0
52 64 126 3.00 18.00 6.4 16.9
59 71 113 2.95 16.04 6.5 17.2
9.5 12 547 0.85 150.00 ** 17.0
12 15 429 1.05 114.56 2.1 17.2
16 20 336 1.25 87.75 4.5 17.4
17 20 376 0.90 85.50 3.7 15.2
19 23 337 0.90 76.00 4.5 15.2
21 25 271 1.40 69.52 5.4 17.5
23 28 277 1.35 62.00 5.3 15.7
SH052-11P-80-04F 22 548
26 31 249 1.65 55.64 5.6 16.2
29 35 223 1.95 49.45 5.8 16.1
31 38 181 1.80 45.50 6.1 17.7 S
33 40 195 2.05 43.07 6.0 16.6
37 45 175 2.40 38.29 6.2 16.5
41 50 158 2.45 34.62 6.3 16.8
46 57 141 2.90 30.77 6.4 16.8
26 31 243 0.85 36.38 2.6 8.8
29 36 221 0.85 32.18 3.2 7.5
34 42 186 1.00 27.50 3.8 9.3
38 46 172 1.10 24.86 4.0 8.2
45 55 143 1.15 20.90 4.4 9.6
47 58 139 1.30 19.85 4.4 8.7 SH042-11P-90S/L-06E
24 546
58 70 112 1.30 16.26 4.6 9.9
63 76 106 1.55 15.00 4.7 9.2
74 90 88 1.50 12.69 4.8 10.1
82 100 81 1.85 11.40 4.8 9.6
106 129 63 2.15 8.87 4.9 9.9
136 165 50 2.55 6.92 5.0 10.1
24 29 259 0.85 59.00 2.1 8.7
29 35 225 0.85 49.80 3.1 7.5
31 38 202 1.05 45.57 3.6 9.1
32 39 179 0.80 45.00 3.9 10.4
35 43 184 1.00 40.50 3.9 8.1
39 48 163 1.25 36.38 4.1 9.5
44 54 148 1.25 32.18 4.3 8.6
SH042-11P-80-04F
52 63 125 1.45 27.50 4.5 9.8 18 546
58 70 115 1.65 24.86 4.6 9.1
68 83 96 1.70 20.90 4.8 10.0
72 88 92 2.00 19.85 4.8 9.4
88 107 75 1.95 16.26 4.9 10.2
95 116 70 2.35 15.00 4.9 9.8
113 137 59 2.25 12.69 4.9 10.3
125 153 54 2.80 11.40 5.0 10.0

Legend see page 509 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 521

 PN = 0.75 kW IE3
50 Hz 60 Hz at 50 Hz

0.75 kW 0.90 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
55 67 117 0.85 17.00 1.7 1.4
59 71 113 0.90 16.03 1.9 0.5
64 78 102 0.95 14.67 2.2 1.6
73 89 89 1.05 12.80 2.4 1.7
75 91 89 1.10 12.52 2.4 1.0
SH032-11P-90S/L-06E 22 544
100 122 66 1.35 9.39 2.8 2.0
101 122 67 1.35 9.35 2.7 1.4
117 142 58 1.55 8.07 2.8 1.6
134 163 51 1.70 7.04 2.9 1.7
182 222 37 2.10 5.17 3.0 2.0
49 60 132 0.80 29.14 1.1 1.3
54 66 122 0.85 26.40 1.6 0.3
63 76 104 1.00 22.77 2.1 1.6
69 84 97 1.05 20.80 2.3 0.8
84 102 78 1.30 17.00 2.6 1.9
89 109 75 1.30 16.03 2.6 1.2
97 119 68 1.45 14.67 2.7 2.0
SH032-11P-80-04F 16 544
112 136 59 1.60 12.80 2.8 2.1
114 139 59 1.60 12.52 2.8 1.6
152 185 44 2.00 9.39 3.0 2.3
153 186 44 2.05 9.35 3.0 1.9
177 216 38 2.30 8.07 3.0 2.0
203 247 33 2.55 7.04 3.0 2.1
277 337 25 3.20 5.17 3.1 2.2

Legend see page 509

522 WG20 Gear Units and Geared Motors www.weg.net

PN = 1.1 kW IE3
50 Hz 60 Hz at 50 Hz

1.1 kW 1.3 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
4.1 5.0 1877 0.85 355.14 6.8 27.1
4.9 5.9 1604 0.95 297.85 11.0 27.5
6.2 7.5 1289 1.20 233.75 13.9 27.9
6.8 8.2 1293 1.25 214.32 13.9 26.1
8.1 9.8 1017 1.50 180.40 15.6 28.2
8.8 11 1014 1.55 165.46 15.6 26.8
9.8 12 854 1.70 149.22 16.3 28.4
SH072-11P-90S/L-04E 67 552
10 13 857 1.80 138.77 16.3 27.2
11 14 734 1.95 126.92 16.8 28.6
13 16 684 2.20 108.91 16.9 27.7
16 19 547 2.40 92.89 17.3 28.8
17 21 534 2.75 84.05 17.4 28.1
19 23 455 2.75 76.52 17.5 28.9
22 26 444 2.90 66.59 17.6 26.7
4.1 5.0 1868 0.85 233.75 7.0 27.2
4.5 5.4 1903 0.85 214.32 6.2 24.5
5.3 6.5 1481 1.00 180.40 12.3 27.6
5.8 7.0 1495 1.05 165.46 12.2 25.6
6.4 7.8 1248 1.20 149.22 14.2 27.9
6.9 8.4 1268 1.25 138.77 14.0 26.2
7.6 9.2 1077 1.30 126.92 15.2 28.2
8.7 11 943 1.45 110.00 15.9 28.3
8.8 11 1011 1.50 108.91 15.6 26.8 SH072-11P-100L-06D 73 552
10 13 807 1.65 92.89 16.5 28.5
11 14 860 1.20 86.25 16.3 24.0
13 15 680 1.85 76.52 16.9 28.6 S
14 17 666 1.90 66.59 17.0 25.3
16 20 567 2.45 59.13 17.3 28.0
17 21 561 2.55 55.85 17.3 25.9
19 23 495 2.70 51.25 17.4 28.2
22 27 421 3.00 43.28 17.6 28.4
6.7 8.1 1161 0.85 216.00 ** 25.7
8.2 9.9 971 1.00 177.23 1.5 26.0
9.0 11 970 1.00 160.88 1.6 24.3
11 14 780 1.25 127.50 6.6 24.9
14 17 597 1.45 104.40 8.6 26.6
15 18 615 1.55 99.00 8.5 25.5
17 20 498 1.70 86.09 9.4 26.7
SH062-11P-90S/L-04E 44 550
18 22 510 1.80 81.23 9.3 25.8
21 25 413 1.95 70.62 9.9 26.9
23 28 400 2.20 62.91 9.9 26.2
24 29 354 2.15 60.00 10.1 27.0
29 36 293 2.45 49.33 10.4 27.1
30 37 307 2.70 47.85 10.3 26.5
37 45 262 2.65 39.00 10.5 25.4
7.0 8.5 1119 0.85 137.25 ** 25.8
7.5 9.1 1149 0.85 127.50 ** 23.7
9.2 11 874 1.00 104.40 4.9 26.2
9.7 12 907 1.05 99.00 4.1 24.5
11 14 732 1.15 86.09 7.2 26.4
12 14 754 1.20 81.23 6.9 25.0
14 16 610 1.35 70.62 8.5 26.6
15 19 593 1.50 62.91 8.7 25.6
16 19 520 1.50 60.00 9.2 26.7
SH062-11P-100L-06D 50 550
19 24 432 1.65 49.33 9.8 26.8
20 24 457 1.85 47.85 9.6 26.0
24 30 380 2.10 39.46 10.0 26.3
25 30 393 1.75 39.00 10.0 24.3
30 36 314 2.45 32.37 10.3 26.5
35 42 269 2.65 27.50 10.5 26.6
39 47 253 2.95 24.78 10.5 25.5
42 52 222 2.80 22.61 10.6 26.8
54 65 177 2.95 17.93 10.7 26.9

www.weg.net WG20 Gear Units and Geared Motors 523

 PN = 1.1 kW IE3
50 Hz 60 Hz at 50 Hz

1.1 kW 1.3 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
17 20 485 0.85 87.75 ** 17.1
21 25 446 0.95 69.75 1.1 14.7
23 28 400 0.95 62.00 3.1 14.7
26 32 360 1.15 55.64 4.1 15.3
29 36 322 1.35 49.45 4.7 15.3
32 39 262 1.25 45.50 5.5 17.5
34 41 281 1.40 43.07 5.2 15.9 SH052-11P-90S/L-04E 26 548
38 46 252 1.70 38.29 5.6 15.9
42 51 228 1.70 34.62 5.8 16.3
47 57 204 2.00 30.77 6.0 16.3
55 67 175 2.10 26.44 6.2 16.7
62 75 157 2.50 23.50 6.3 16.7
72 87 135 2.60 20.25 6.4 17.0
17 21 534 0.80 55.64 ** 14.0
19 24 479 0.90 49.45 ** 14.0
21 26 393 0.85 45.50 3.3 17.3
22 27 418 0.95 43.07 2.5 14.9
25 30 375 1.15 38.29 3.7 14.9
28 34 339 1.15 34.62 4.4 15.5
31 38 304 1.35 30.77 5.0 15.5
36 44 262 1.45 26.44 5.4 16.1
41 50 234 1.70 23.50 5.7 16.0 SH052-11P-100L-06D 32 548
47 58 203 1.75 20.25 6.0 16.5
53 65 181 2.10 18.00 6.1 16.5
60 73 162 2.05 16.04 6.2 16.8
S 67 82 144 2.45 14.26 6.3 16.8
75 91 130 2.45 12.81 6.4 17.0
84 102 116 2.70 11.38 6.5 17.0
91 111 107 2.65 10.50 6.5 17.2
103 125 95 2.95 9.33 6.5 17.2
40 48 235 0.85 36.38 2.9 8.9
45 55 213 0.90 32.18 3.4 7.6
53 64 180 1.00 27.50 3.9 9.3
59 71 166 1.15 24.86 4.1 8.3
70 84 138 1.20 20.90 4.4 9.7
73 89 132 1.40 19.85 4.5 8.8
SH042-11P-90S/L-04E 22 546
89 108 108 1.35 16.26 4.7 9.9
97 117 101 1.65 15.00 4.7 9.3
115 139 85 1.60 12.69 4.8 10.1
128 154 78 1.95 11.40 4.9 9.6
164 198 61 2.25 8.87 4.9 9.9
210 254 47 2.65 6.92 5.0 10.1
46 56 206 0.80 20.90 3.5 9.1
48 59 199 0.95 19.85 3.6 7.8
59 72 161 0.90 16.26 4.2 9.5
64 78 152 1.10 15.00 4.3 8.5
SH042-11P-100L-06D 28 546
76 92 127 1.05 12.69 4.5 9.8
84 102 116 1.30 11.40 4.6 9.1
108 131 91 1.50 8.87 4.8 9.4
139 168 71 1.75 6.92 4.9 9.7
86 104 113 0.90 17.00 1.9 1.5
91 110 108 0.90 16.03 2.0 0.6
99 120 98 1.00 14.67 2.2 1.6
114 138 85 1.10 12.80 2.5 1.8
116 141 85 1.15 12.52 2.5 1.0
SH032-11P-90S/L-04E 20 544
155 187 63 1.40 9.39 2.8 2.0
156 188 64 1.45 9.35 2.8 1.5
180 218 55 1.60 8.07 2.9 1.6
207 250 48 1.80 7.04 2.9 1.8
282 341 36 2.20 5.17 3.0 2.0

Legend see page 509 ** ... on request

524 WG20 Gear Units and Geared Motors www.weg.net

 PN = 1.5 kW IE3
50 Hz 60 Hz at 50 Hz

1.5 kW 1.8 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
6.2 7.5 1763 0.90 233.75 8.9 27.3
6.8 8.2 1769 0.90 214.32 8.8 24.8
8.0 9.7 1392 1.10 180.40 13.1 27.8
8.8 11 1388 1.15 165.46 13.1 25.8
9.7 12 1168 1.25 149.22 14.7 28.0
10 13 1172 1.35 138.77 14.7 26.4
11 14 1005 1.40 126.92 15.6 28.2
13 16 935 1.65 108.91 16.0 27.0
SH072-11P-90S/L-04F 68 552
16 19 749 1.80 92.89 16.7 28.6
17 21 731 2.00 84.05 16.8 27.6
19 23 622 2.05 76.52 17.1 28.7
21 25 609 2.35 69.52 17.2 27.9
22 26 608 2.10 66.59 17.2 25.6
25 30 521 2.65 59.13 17.4 28.1
26 31 512 2.75 55.85 17.4 26.2
28 34 454 2.95 51.25 17.5 28.3
11 14 1068 0.90 127.50 ** 24.0
14 17 817 1.10 104.40 6.0 26.3
15 18 841 1.10 99.00 5.6 24.7
17 20 682 1.25 86.09 7.8 26.5
18 22 698 1.30 81.23 7.6 25.2
21 25 565 1.45 70.62 8.9 26.6
23 28 547 1.60 62.91 9.0 25.7 SH062-11P-90S/L-04F 46 550
24 29 484 1.60 60.00 9.5 26.8
29 36 401 1.80 49.33 9.9 26.9
30 37 420 2.00 47.85 9.8 26.1 S
37 44 349 2.30 39.46 10.2 26.4
45 54 288 2.70 32.37 10.4 26.6
53 64 245 2.90 27.50 10.5 26.7
26 32 492 0.85 55.64 ** 14.4
29 35 440 1.00 49.45 1.5 14.3
32 39 358 0.95 45.50 4.1 17.3
34 41 385 1.05 43.07 3.5 15.2
38 46 344 1.25 38.29 4.3 15.1
42 51 312 1.25 34.62 4.8 15.7
47 57 279 1.50 30.77 5.3 15.7
55 66 240 1.55 26.44 5.7 16.2
SH052-11P-90S/L-04F 28 548
62 75 215 1.85 23.50 5.9 16.2
72 87 185 1.90 20.25 6.1 16.6
81 98 165 2.25 18.00 6.2 16.6
90 109 147 2.25 16.04 6.3 16.9
102 123 132 2.70 14.26 6.4 16.9
113 137 118 2.65 12.81 6.5 17.1
127 154 105 2.95 11.38 6.5 17.1
138 167 97 2.95 10.50 6.5 17.3
58 71 227 0.85 24.86 3.1 7.4
69 84 188 0.85 20.90 3.8 9.2
73 88 181 1.00 19.85 3.9 8.1
89 108 148 1.00 16.26 4.3 9.6
97 117 139 1.20 15.00 4.4 8.7 SH042-11P-90S/L-04F 24 546
114 138 116 1.15 12.69 4.6 9.8
127 154 106 1.40 11.40 4.7 9.2
163 198 83 1.65 8.87 4.8 9.6
209 253 65 1.95 6.92 4.9 9.8
113 137 117 0.80 12.80 1.7 1.4
116 140 116 0.85 12.52 1.8 0.4
154 187 86 1.00 9.39 2.5 1.8
155 188 87 1.05 9.35 2.4 1.0 SH032-11P-90S/L-04F 22 544
180 218 76 1.20 8.07 2.6 1.2
206 249 66 1.30 7.04 2.8 1.4
281 340 49 1.65 5.17 2.9 1.8

Legend see page 509 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 525

 PN = 2.2 kW IE3
50 Hz 60 Hz at 50 Hz

2.2 kW 2.6 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
8.7 11 2057 0.80 165.46 ** 24.1
9.6 12 1731 0.85 149.22 9.4 27.3
10 13 1737 0.90 138.77 9.3 24.9
11 14 1489 0.95 126.92 12.2 27.6
13 16 1386 1.10 108.91 13.1 25.8
15 19 1109 1.20 92.89 15.1 28.1
16 19 1072 1.25 89.57 15.3 28.2
17 21 1083 1.35 84.05 15.2 26.6
19 23 922 1.40 76.52 16.0 28.3
21 25 903 1.60 69.52 16.1 27.1
22 26 901 1.45 66.59 16.1 23.8 SH072 11P 100L-04E 78 552
23 28 761 1.45 62.62 16.7 28.5
24 30 773 1.80 59.13 16.6 27.5
26 31 759 1.85 55.85 16.7 24.7
28 34 673 2.00 51.25 17.0 27.7
33 40 600 2.30 43.83 17.2 25.7
34 42 551 2.25 41.73 17.3 28.0
40 49 473 2.40 35.65 17.5 28.3
42 52 466 2.85 33.83 17.5 26.5
49 60 388 2.50 29.17 17.7 28.5
60 73 321 2.60 24.07 17.8 28.7
17 20 1010 0.85 86.09 ** 26.0
18 21 1034 0.90 81.23 ** 24.1
20 25 838 1.00 70.62 5.6 26.2
23 28 810 1.10 62.91 6.1 24.8
S 24 29 717 1.10 60.00 7.4 26.4
29 35 594 1.20 49.33 8.6 26.6
30 36 623 1.35 47.85 8.4 25.5
36 44 517 1.55 39.46 9.2 25.8
37 45 532 1.30 39.00 9.1 23.2
44 54 426 1.80 32.37 9.8 26.1
45 55 439 1.70 32.00 9.7 23.9
52 63 364 1.95 27.50 10.1 26.3 SH062 11P 100L-04E 56 550
58 70 342 2.15 24.78 10.2 24.7
63 77 300 2.05 22.61 10.3 26.5
66 80 290 2.05 21.80 10.4 26.6
76 93 261 2.75 18.85 10.5 25.4
80 97 239 2.15 17.93 10.5 26.7
92 112 216 2.60 15.54 10.6 25.8
113 137 178 2.70 12.75 10.7 26.1
132 161 151 2.75 10.83 10.7 26.3
161 196 125 2.85 8.91 10.8 26.5
167 203 120 2.90 8.59 10.8 26.5
203 247 99 2.95 7.07 10.8 26.7
37 46 510 0.85 38.29 ** 13.8
41 50 462 0.85 34.62 ** 14.6
47 57 413 1.00 30.77 2.7 14.6
54 66 356 1.05 26.44 4.1 15.4
61 74 318 1.25 23.50 4.8 15.4
71 86 274 1.30 20.25 5.3 16.0
80 97 245 1.55 18.00 5.6 16.0 SH052 11P 100L-04E 37 548
89 109 218 1.55 16.04 5.9 16.4
101 122 195 1.85 14.26 6.0 16.4
112 136 175 1.80 12.81 6.2 16.7
126 153 156 2.00 11.38 6.3 16.7
137 166 144 2.00 10.50 6.3 16.9
154 187 128 2.20 9.33 6.4 16.9
96 116 206 0.80 15.00 3.5 7.7
113 137 172 0.80 12.69 4.0 9.4
126 153 157 0.95 11.40 4.2 8.5 SH042-11P-100L-04E 33 546
162 197 123 1.15 8.87 4.6 9.0
207 252 96 1.30 6.92 4.8 9.4

Legend see page 509 ** ... on request

526 WG20 Gear Units and Geared Motors www.weg.net

 PN = 3.0 kW IE3
50 Hz 60 Hz at 50 Hz

3.0 kW 3.6 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
13 16 1884 0.80 108.91 6.7 24.5
16 19 1507 0.90 92.89 12.0 27.6
17 21 1472 1.00 84.05 12.4 25.6
19 23 1253 1.00 76.52 14.1 27.9
21 25 1227 1.15 69.52 14.3 26.3
22 26 1224 1.05 66.59 14.3 21.7
23 28 1034 1.10 62.62 15.5 28.2
24 29 1050 1.30 59.13 15.4 26.7
26 31 1032 1.40 55.85 15.5 22.9
28 34 914 1.45 51.25 16.1 27.1
33 40 815 1.70 43.83 16.5 24.3 SH072-11P-L100L-04F 85 552
35 42 749 1.65 41.73 16.7 27.5
40 49 642 1.80 35.65 17.1 27.8
43 51 633 2.10 33.83 17.1 25.5
49 60 528 1.85 29.17 17.4 28.1
51 62 525 2.45 27.98 17.4 26.1
61 73 448 2.75 23.80 17.5 26.6
70 84 389 2.80 20.63 17.7 27.0
83 100 330 2.90 17.42 17.7 27.4
86 104 318 2.90 16.79 17.8 27.5
100 121 272 3.00 14.35 17.8 27.8
23 28 1101 0.80 62.91 ** 23.9
24 29 975 0.80 60.00 1.2 26.0
29 35 808 0.90 49.33 6.2 26.3
30 36 847 1.00 47.85 5.5 24.7
36 44 703 1.15 39.46 7.6 25.2 S
37 45 723 0.95 39.00 7.3 21.6
44 54 579 1.35 32.37 8.8 25.6
45 54 596 1.25 32.00 8.6 22.7
52 63 494 1.45 27.50 9.4 25.9
58 70 464 1.60 24.78 9.6 23.7
SH062-11P-L100L-04F 62 550
64 77 408 1.55 22.61 9.9 26.2
66 80 394 1.55 21.80 10.0 26.2
76 92 355 2.05 18.85 10.1 24.6
80 97 325 1.60 17.93 10.3 26.4
93 112 294 1.90 15.54 10.4 25.1
113 136 241 2.00 12.75 10.5 25.5
133 161 205 2.05 10.83 10.6 25.8
162 195 169 2.10 8.91 10.7 26.1
168 203 163 2.15 8.59 10.7 26.2
204 246 134 2.15 7.07 10.8 26.4
54 66 483 0.80 26.44 ** 14.4
61 74 432 0.95 23.50 2.0 14.4
71 86 373 0.95 20.25 3.8 15.2
80 97 333 1.15 18.00 4.5 15.2
90 108 297 1.15 16.04 5.0 15.8
SH052-11P-L100L-04F 44 548
101 122 265 1.35 14.26 5.4 15.8
112 136 238 1.35 12.81 5.7 16.2
126 153 212 1.50 11.38 5.9 16.2
137 166 196 1.45 10.50 6.0 16.6
154 186 175 1.60 9.33 6.2 16.5

Legend see page 509 ** ... on request

www.weg.net WG20 Gear Units and Geared Motors 527

 PN = 4.0 kW IE3
50 Hz 60 Hz at 50 Hz

4.0 kW 4.8 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
19 23 1660 0.80 76.52 10.3 27.4
21 25 1625 0.90 69.52 10.8 25.2
22 26 1621 0.80 66.59 10.8 19.2
23 28 1369 0.80 62.62 13.3 27.8
25 30 1390 1.00 59.13 13.1 25.8
26 31 1366 1.05 55.85 13.3 20.8
28 34 1211 1.10 51.25 14.4 26.3
33 40 1079 1.30 43.83 15.2 22.6
34 41 1027 1.25 43.28 15.5 26.8
35 42 991 1.25 41.73 15.7 26.9
41 49 850 1.35 35.65 16.3 27.3 SH072-11P-112M-04E 85 552
43 52 838 1.60 33.83 16.4 24.2
50 60 699 1.40 29.17 16.9 27.7
52 63 696 1.85 27.98 16.9 25.1
61 74 594 2.05 23.80 17.2 25.7
70 85 515 2.10 20.63 17.4 26.2
83 101 436 2.20 17.42 17.6 26.7
86 104 421 2.20 16.79 17.6 26.8
101 122 360 2.25 14.35 17.7 27.2
124 149 295 2.35 11.74 17.8 27.6
150 181 244 2.40 9.68 17.9 27.9
37 44 930 0.90 39.46 3.4 24.5
45 54 767 1.00 32.37 6.8 25.0
53 64 655 1.10 27.50 8.1 25.4
59 71 615 1.20 24.78 8.5 22.5
S 64 78 540 1.15 22.61 9.1 25.7
67 80 521 1.15 21.80 9.2 25.8
77 93 470 1.55 18.85 9.5 23.7
SH062-11P-112M-04E 63 550
81 98 430 1.20 17.93 9.8 26.1
93 113 389 1.45 15.54 10.0 24.4
114 138 320 1.50 12.75 10.3 24.9
134 162 272 1.55 10.83 10.4 25.3
163 197 224 1.60 8.91 10.6 25.7
169 204 216 1.60 8.59 10.6 25.8
205 248 178 1.65 7.07 10.7 26.1

Legend see page 509

528 WG20 Gear Units and Geared Motors www.weg.net

 PN = 5.5 kW IE3
50 Hz 60 Hz at 50 Hz

5.5 kW 6.6 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
26 32 1860 0.80 55.85 7.2 17.6
29 34 1648 0.85 51.25 10.5 25.2
33 40 1469 0.95 43.83 12.4 20.1
34 41 1398 0.90 43.28 13.0 25.8
35 42 1349 0.95 41.73 13.4 25.9
41 50 1157 1.00 35.65 14.8 26.4
43 52 1141 1.20 33.83 14.9 22.2
50 61 951 1.05 29.17 15.9 27.0
SH072-11P-132S-04E 104 552
52 63 947 1.35 27.98 15.9 23.5
62 74 808 1.50 23.80 16.5 24.3
71 86 702 1.55 20.63 16.9 25.0
84 101 594 1.60 17.42 17.2 25.7
87 105 573 1.65 16.79 17.3 25.8
102 123 490 1.70 14.35 17.5 26.4
125 150 402 1.70 11.74 17.6 26.9
151 182 332 1.75 9.68 17.7 27.4
53 64 891 0.80 27.50 4.5 24.6
59 71 837 0.90 24.78 5.7 20.7
65 78 735 0.85 22.61 7.2 25.1
67 81 710 0.85 21.80 7.5 25.2
78 94 640 1.15 18.85 8.2 22.3
82 98 586 0.90 17.93 8.7 25.6
SH062-11P-132S-04E 82 550
94 114 529 1.10 15.54 9.1 23.2
115 138 435 1.10 12.75 9.7 24.0
135 163 370 1.15 10.83 10.1 24.5
164 198 305 1.20 8.91 10.3 25.0 S
171 205 294 1.20 8.59 10.4 25.1
207 250 242 1.20 7.07 10.5 25.5

Legend see page 509

www.weg.net WG20 Gear Units and Geared Motors 529

 PN = 7.5 kW IE3
50 Hz 60 Hz at 50 Hz

7.5 kW 9.0 kW Dimension

sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
43 52 1555 0.85 33.83 11.5 19.6
52 63 1291 1.00 27.98 13.9 21.3
62 74 1101 1.10 23.80 15.1 22.5
71 86 957 1.15 20.63 15.9 23.4
84 102 810 1.20 17.42 16.5 24.3 SH072-11P-L132M-04F 118 552
87 105 781 1.20 16.79 16.6 24.5
102 123 669 1.25 14.35 17.0 25.2
125 151 548 1.25 11.74 17.3 26.0
151 183 453 1.30 9.68 17.5 26.6
78 94 872 0.85 18.85 5.0 20.4
94 114 721 0.80 15.54 7.4 21.7
115 139 593 0.80 12.75 8.7 22.7
135 163 505 0.85 10.83 9.3 23.4 SH062-11P-L132M-04F 96 550
164 199 416 0.85 8.91 9.8 24.1
171 206 401 0.90 8.59 9.9 24.3
207 251 330 0.90 7.07 10.2 24.8

PN = 9.2 kW IE3
50 Hz 60 Hz at 50 Hz
S 9.2 kW 11 kW Dimension
sheet
n50 n60 M2 fB i FrN FaN m see page
min-1 min-1 Nm kN kN kg
52 63 1589 0.85 27.98 11.2 19.4
61 74 1356 0.90 23.80 13.4 20.9
71 86 1178 0.95 20.63 14.6 22.0
84 101 997 1.00 17.42 15.7 23.1
SH072-11P-L132M-04G 123 552
87 105 961 1.00 16.79 15.8 23.4
102 123 823 1.00 14.35 16.4 24.3
124 150 675 1.05 11.74 17.0 25.2
151 182 557 1.05 9.68 17.3 25.9

Legend see page 509

530 WG20 Gear Units and Geared Motors www.weg.net

Selection tables - Gear units
Structure of the selection tables

1 2 3 4 5 6 7 8 9
IEC motor frame size 10
63 71 80 90 100 112 132

Type iges. M2nenn n4 η4 n6 η6 iexakt n1max

IEC adapter 11
I63 I71 I80 I90 I100 I112 I132

NEMA adapter 12
N213/
N56 N143/145 N182 N184
[Nm] [min-1] [min-1] [min-1] 215
S032

2 stages 13
n4=1400 min-1
14
n6=900 min-1

Maximum torque
126 Nm 15

1 2 16 18
SERVO adapter Input unit

S
Input shaft
Type iges. n1max Adapter size 17 n1max
[mm]

19
[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50

1 Type of gear unit

2 Total ratio
3 Permissible output torque at S1 operation (fB = 1.0)
4 Output speed (gear unit) at n4 = 1400 min-1
5 Efficiency gear unit at n4 = 1400 min-1
6 Output speed (gear unit) at n6 = 900 min-1
7 Efficiency gear unit at n6 = 900 min-1
8 Exact mathematical ratio
9 Maximum permissible input speed gear unit. valid for direct mounting and IEC / NEMA adapter
Max. permissible input speed IEC / NEMA adapter: I63 - I132 / N56 - N213 = 3000 min-1
Max. permissible motor speed (Direct mounting): motor frame size 63 - 132 = 3000 min-1
Higher motor speed on request
10 Possible motor frame sizes (Direct mounting)
11 Possible IEC adapter sizes
12 Possible NEMA adapter sizes
17 Possible SERVO adapter size
13 Number of gear stages
18 Maximum input speed -
14 Motor speed n4 (4 poles) / n6 (6 poles)
direct mounting, IEC / NEMA adapter and input unit
15 Maximum torque Higher input speeds on request
16 Maximum input speed - SERVO adapter 19 Possible input shafts of the input unit

www.weg.net WG20 Gear Units and Geared Motors 531

 IEC motor frame size

63 71 80 90 100 112 132

IEC adapter
Type iges. M2nenn n4 η4 n6 η6 iexakt n1max
I63 I71 I80 I90 I100 I112 I132

NEMA adapter

N213/
N56 N143/145 N182 N184
[Nm] [min-1] [min-1] [min-1] 215
S032 275.50 126 5.1 66% 6.4 63% 551/2 6000
214.60 125 6.5 68% 8.2 65% 1073/5 6000
174.00 124 8.0 70% 10 66% 174/1 6000
137.09 121 10 72% 13 68% 1508/11 6000
105.64 120 13 74% 17 70% 1479/14 6000
82.54 116 17 76% 21 72% 1073/13 5200
76.00 108 18 86% 23 84% 76/1 6000
61.63 111 23 77% 28 74% 493/8 4200
59.20 111 24 87% 30 85% 296/5 6000
53.17 108 26 78% 33 75% 319/6 3800
48.00 110 29 88% 36 86% 48/1 6000
2 stages 46.40 106 30 79% 38 76% 232/5 3400
41.80 63 33 91% 42 89% 209/5 6000
n4=1400 min-1 37.82 108 37 89% 46 87% 416/11 6000
34.04 98 41 81% 51 78% 783/23 3000
n6=900 min-1 32.56 101 43 91% 54 90% 814/25 6000
29.14 105 48 90% 60 88% 204/7 6000
26.40 101 53 92% 66 90% 132/5 6000
22.77 103 61 91% 77 89% 296/13 5200
Maximum torque
126 Nm 20.80 100 67 93% 84 91% 104/5 6000
17.00 98 82 92% 103 91% 17/1 4200
16.03 97 87 93% 109 92% 561/35 6000
14.67 96 95 92% 119 91% 44/3 3800

S 12.80
12.52
93
94
109
112
93%
94%
137
140
91%
93%
64/5
814/65
3400
5200
9.39 86 149 93% 186 92% 216/23 3000
9.35 90 150 95% 187 94% 187/20 4200
8.07 87 174 95% 217 94% 121/15 3800
7.04 85 199 95% 249 94% 176/25 3400
5.17 78 271 95% 339 95% 594/115 3000

Legend see page 531

532 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50
S032 275.50 6600 -
214.60 6600 3000
174.00 6600 3000
137.09 6600 3000
105.64 6600 3000
82.54 5800 3000
76.00 6600 -
61.63 4700 3000
59.20 6600 3000
53.17 4200 3000
48.00 6600 3000
46.40 3800 3000
41.80 6600 -
37.82 6600 3000
34.04 3300 3000
32.56 6600 3000
29.14 6600 3000
26.40 6600 3000
22.77 5800 3000
20.80 6600 3000
17.00 4700 3000
16.03 6600 3000
14.67 4200 3000
12.80
12.52
3800
5800
3000
3000
S
9.39 3300 3000
9.35 4700 3000
8.07 4200 3000
7.04 3800 3000
5.17 3300 3000

Legend see page 531

www.weg.net WG20 Gear Units and Geared Motors 533

 IEC motor frame size

63 71 80 90 100 112 132

IEC adapter
Type iges. M2nenn n4 η4 n6 η6 iexakt n1max
I63 I71 I80 I90 I100 I112 I132

NEMA adapter

N213/
N56 N143/145 N182 N184
[Nm] [min-1] [min-1] [min-1] 215
S042 323.70 228 4.3 65% 5.4 62% 3237/10 6000
263.25 224 5.3 67% 6.6 63% 1053/4 6000
209.18 222 6.7 69% 8.4 65% 2301/11 6000
161.57 218 8.7 71% 11 67% 1131/7 6000
129.00 208 11 73% 14 69% 129/1 5800
97.50 184 14 75% 18 71% 195/2 4700
91.30 213 15 85% 19 83% 913/10 6000
74.25 211 19 86% 24 84% 297/4 6000
74.10 164 19 77% 24 73% 741/10 3800
2 stages 59.00 209 24 87% 30 85% 59/1 6000
57.65 149 24 78% 30 74% 1326/23 3300
49.80 181 28 90% 35 89% 249/5 6000
n4=1400 min-1 45.57 204 31 89% 38 87% 319/7 6000
45.00 136 31 79% 39 75% 45/1 2900
n6=900 min-1
40.50 182 35 91% 43 89% 81/2 6000
36.38 198 38 89% 48 88% 473/13 5800
32.18 184 44 92% 54 90% 354/11 6000
Maximum torque 27.50 177 51 90% 64 89% 55/2 4700
228 Nm 24.86 185 56 92% 70 91% 174/7 6000
20.90 160 67 91% 84 90% 209/10 3800
19.85 180 71 92% 88 92% 258/13 5800
16.26 144 86 92% 108 91% 374/23 3300
15.00 164 93 94% 117 93% 15/1 4700

S 12.69
11.40
132
148
110
123
92%
94%
138
154
91%
93%
165/13
57/5
2900
3800
8.87 136 158 95% 197 94% 204/23 3300
6.92 125 202 95% 253 94% 90/13 2900

Legend see page 531

534 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50
S042 323.70 6600 3000
263.25 6600 3000
209.18 6600 3000
161.57 6600 3000
129.00 6400 3000
97.50 5200 3000
91.30 6600 3000
74.25 6600 3000
74.10 4200 3000
59.00 6600 3000
57.65 3600 3000
49.80 6600 3000
45.57 6600 3000
45.00 3200 3000
40.50 6600 3000
36.38 6400 3000
32.18 6600 3000
27.50 5200 3000
24.86 6600 3000
20.90 4200 3000
19.85 6400 3000
16.26 3600 3000
15.00 5200 3000
12.69
11.40
3200
4200
3000
3000
S
8.87 3600 3000
6.92 3200 3000

Legend see page 531

www.weg.net WG20 Gear Units and Geared Motors 535

 IEC motor frame size

63 71 80 90 100 112 132

IEC adapter
Type iges. M2nenn n4 η4 n6 η6 iexakt n1max
I63 I71 I80 I90 I100 I112 I132

NEMA adapter

N213/
N56 N143/145 N182 N184
[Nm] [min-1] [min-1] [min-1] 215
S052 370.50 489 3.8 65% 4.7 62% 741/2 6000
302.25 473 4.6 67% 5.8 63% 1209/4 6000
241.09 468 5.8 69% 7.3 65% 2652/11 6000
186.64 463 7.5 71% 9.4 67% 2613/14 6000
150.00 452 9.3 73% 12 69% 150/1 6000
114.56 438 12 75% 15 72% 1833/16 5400
87.75 412 16 77% 20 74% 351/4 4300
85.50 320 16 88% 20 86% 171/2 6000
76.00 287 18 88% 23 87% 76/1 6000
69.75 403 20 89% 25 87% 279/4 6000
69.52 367 20 78% 25 76% 1599/23 3700
2 stages 62.00 361 23 89% 28 88% 62/1 6000
55.64 402 25 90% 31 88% 612/11 6000
n4=1400 min-1 55.50 344 25 79% 32 78% 111/2 3300
49.45 428 28 90% 35 88% 544/11 6000
n6=900 min-1 45.50 323 31 80% 38 79% 91/2 3000
43.07 392 33 90% 41 89% 603/14 6000
38.29 418 37 91% 46 89% 268/7 6000
34.62 382 40 91% 51 90% 450/13 6000
Maximum torque
489 Nm 30.77 407 46 92% 57 90% 400/13 6000
26.44 367 53 92% 66 91% 423/16 5400
23.50 391 60 92% 74 91% 47/2 5400
20.25 350 69 93% 86 91% 81/4 4300

S 18.00
16.04
372
331
78
87
93%
93%
97
109
92%
92%
18/1
369/23
4300
3700
14.26 353 98 93% 123 93% 328/23 3700
12.81 313 109 93% 137 93% 333/26 3300
11.38 311 123 94% 154 93% 148/13 3300
10.50 282 133 94% 167 93% 21/2 3000
9.33 278 150 94% 188 93% 28/3 3000

Legend see page 531

536 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50
S052 370.50 6600 3000
302.25 6600 3000
241.09 6600 3000
186.64 6600 3000
150.00 6600 3000
114.56 6000 3000
87.75 4800 3000
85.50 6600 3000
76.00 6600 3000
69.75 6600 3000
69.52 4200 3000
62.00 6600 3000
55.64 6600 3000
55.50 3700 3000
49.45 6600 3000
45.50 3300 3000
43.07 6600 3000
38.29 6600 3000
34.62 6600 3000
30.77 6600 3000
26.44 6000 3000
23.50 6000 3000
20.25 4800 3000
18.00
16.04
4800
4200
3000
3000
S
14.26 4200 3000
12.81 3700 3000
11.38 3700 3000
10.50 3300 3000
9.33 3300 3000

Legend see page 531

www.weg.net WG20 Gear Units and Geared Motors 537

 IEC motor frame size

63 71 80 90 100 112 132

IEC adapter
Type iges. M2nenn n4 η4 n6 η6 iexakt n1max
I63 I71 I80 I90 I100 I112 I132

NEMA adapter

N213/
N56 N143/145 N182 N184
[Nm] [min-1] [min-1] [min-1] 215
S062 351.00 996 4.0 71% 5.0 67% 351/1 6000
278.18 978 5.0 72% 6.3 69% 3060/11 6000
216.00 956 6.5 74% 8.1 71% 216/1 6000
177.23 940 7.9 76% 9.9 73% 2304/13 6000
160.88 941 8.7 84% 11 81% 1287/8 6000
137.25 908 10 78% 13 75% 549/4 5800
127.50 944 11 85% 14 82% 255/2 6000
104.40 864 13 79% 17 76% 522/5 4600
99.00 923 14 86% 18 84% 99/1 6000
86.09 831 16 80% 20 78% 1980/23 4000
81.23 904 17 87% 22 85% 1056/13 6000
70.62 796 20 81% 25 79% 918/13 3500
63.38 408 22 92% 28 91% 507/8 6000
62.91 871 22 88% 28 86% 2013/32 5800
2 stages 60.00 758 23 82% 29 79% 60/1 3200
50.23 599 28 92% 35 91% 1105/22 6000
n4=1400 min-1 49.33 711 28 82% 35 80% 148/3 2800
47.85 829 29 89% 37 87% 957/20 4600
n6=900 min-1 47.57 682 29 82% 37 80% 333/7 2700
39.46 797 35 89% 44 88% 1815/46 4000
39.13 594 36 83% 45 81% 900/23 2500
39.00 682 36 93% 45 92% 39/1 6000
Maximum torque
996 Nm 32.37 765 43 90% 54 89% 1683/52 3500

S 32.00
27.50
730
708
44
51
94%
90%
55
64
93%
89%
32/1
55/2
6000
3200
24.78 734 56 94% 71 93% 793/32 5800
22.61 614 62 91% 77 90% 407/18 2800
21.80 592 64 91% 80 90% 1221/56 2700
18.85 717 74 95% 93 94% 377/20 4600
17.93 514 78 91% 98 90% 825/46 2500
15.54 557 90 95% 113 94% 715/46 4000
12.75 474 110 95% 137 95% 51/4 3500
10.83 415 129 95% 162 95% 65/6 3200
8.91 351 157 95% 196 95% 481/54 2800
8.59 343 163 96% 204 95% 481/56 2700
7.07 287 198 96% 248 95% 325/46 2500

Legend see page 531

538 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50
S062 351.00 6600 3000
278.18 6600 3000
216.00 6600 3000
177.23 6600 3000
160.88 6600 3000
137.25 6400 3000
127.50 6600 3000
104.40 5100 3000
99.00 6600 3000
86.09 4500 3000
81.23 6600 3000
70.62 3900 3000
63.38 6600 3000
62.91 6400 3000
60.00 3600 3000
50.23 6600 3000
49.33 3200 3000
47.85 5100 3000
47.57 3100 3000
39.46 4500 3000
39.13 2800 2800
39.00 6600 3000
32.37 3900 3000
32.00
27.50
6600
3600
3000
3000
S
24.78 6400 3000
22.61 3200 3000
21.80 3100 3000
18.85 5100 3000
17.93 2800 2800
15.54 4500 3000
12.75 3900 3000
10.83 3600 3000
8.91 3200 3000
8.59 3100 3000
7.07 2800 2800

Legend see page 531

www.weg.net WG20 Gear Units and Geared Motors 539

 IEC motor frame size

63 71 80 90 100 112 132

IEC adapter
Type iges. M2nenn n4 η4 n6 η6 iexakt n1max
I63 I71 I80 I90 I100 I112 I132

NEMA adapter

N213/
N56 N143/145 N182 N184
[Nm] [min-1] [min-1] [min-1] 215
S072 460.00 1597 3.0 71% 3.8 68% 460/1 6000
355.14 1546 3.9 73% 4.9 70% 2486/7 6000
297.85 1513 4.7 75% 5.9 71% 3872/13 6000
233.75 1502 6.0 76% 7.5 73% 935/4 6000
214.32 1567 6.5 84% 8.2 81% 4715/22 6000
180.40 1478 7.8 78% 9.7 75% 902/5 4900
165.46 1558 8.5 85% 11 83% 4633/28 6000
149.22 1436 9.4 79% 12 76% 3432/23 4200
138.77 1534 10 86% 13 84% 1804/13 6000
126.92 1396 11 80% 14 78% 1650/13 3700
110.00 1362 13 81% 16 78% 110/1 3400
108.91 1497 13 87% 16 85% 3485/32 6000
92.89 1310 15 82% 19 79% 836/9 3000
89.57 1295 16 82% 20 80% 627/7 2900
86.25 1019 16 92% 20 91% 345/4 6000
2 stages 84.05 1447 17 88% 21 86% 1681/20 4900
76.52 1250 18 82% 23 81% 1760/23 2600
69.52 1404 20 89% 25 87% 1599/23 4200
n4=1400 min-1 66.59 1267 21 92% 26 91% 3729/56 6000
62.62 1095 22 83% 28 83% 814/13 2100
n6=900 min-1
59.13 1363 24 89% 30 88% 3075/52 3700
55.85 1402 25 93% 31 92% 726/13 6000
51.65 937 27 84% 34 83% 1188/23 1900

S Maximum torque
1597 Nm
51.25
43.83
1324
1365
27
32
90%
93%
34
40
88%
92%
205/4
2805/64
3400
6000
43.28 1256 32 90% 40 89% 779/18 3000
41.73 1222 34 90% 42 89% 2337/56 2900
35.65 1132 39 91% 49 89% 820/23 2600
33.83 1315 41 94% 52 93% 1353/40 4900
29.17 969 48 91% 60 90% 1517/52 2100
27.98 1273 50 94% 63 93% 1287/46 4200
24.07 823 58 91% 73 90% 1107/46 1900
23.80 1211 59 95% 74 94% 2475/104 3700
20.63 1082 68 95% 85 94% 165/8 3400
17.42 948 80 95% 100 94% 209/12 3000
16.79 920 83 95% 104 95% 1881/112 2900
14.35 809 98 95% 122 95% 330/23 2600
11.74 683 119 95% 149 95% 1221/104 2100
9.68 579 145 96% 181 95% 891/92 1900

Legend see page 531

540 WG20 Gear Units and Geared Motors www.weg.net

 SERVO adapter Input unit

Input shaft
Type iges. n1max Adapter size n1max
[mm]

[min-1] S92 S105 S114 S115 S130 S141 S142 S180 S189 S190 [min-1] 19x40 24x50
S072 460.00 6600 3000
355.14 6600 3000
297.85 6600 3000
233.75 6600 3000
214.32 6600 3000
180.40 5400 3000
165.46 6600 3000
149.22 4700 3000
138.77 6600 3000
126.92 4200 3000
110.00 3700 3000
108.91 6600 3000
92.89 3300 3000
89.57 3200 3000
86.25 6600 3000
84.05 5400 3000
76.52 2900 2900
69.52 4700 3000
66.59 6600 3000
62.62 2600 2600
59.13 4200 3000
55.85 6600 3000
51.65 2300 2300
51.25
43.83
3700
6600
3000
3000
S
43.28 3300 3000
41.73 3200 3000
35.65 2900 2900
33.83 5400 3000
29.17 2600 2600
27.98 4700 3000
24.07 2300 2300
23.80 4200 3000
20.63 3700 3000
17.42 3300 3000
16.79 3200 3000
14.35 2900 2900
11.74 2600 2600
9.68 2300 2300

Legend see page 531

www.weg.net WG20 Gear Units and Geared Motors 541

S

542 WG20 Gear Units and Geared Motors www.weg.net

Dimension sheets Geared Motors

S
www.weg.net WG20 Gear Units and Geared Motors 543
 SH032 - Hollow shaft

kB
k
58,5 109 LB1 AD
LB 58,5+12 1)
60

Ø 90

Ø 64
Ø AC
145,7

4
80

Ø 68
28 90
M6 x 12
63 117 M8 x 16
3
117 1)
Incl. hollow shaft protection cap

34 40
22,8

Ø 40
6 H9
M6 x 30 104

Ø 20 H7
120
SD032 - Shrink disc

Ø 20 h6
92
88 60

S
DIN332 M6
Ø 66

117 SS032 - Output shaft

SB032 - Output shaft on both sides
Ø 20 H7

17 20 60/75* 40 40 60 60 40
Ø 20

Ø 20 k6

32 4
6
Ø 40

22,5

139

+5 +5 DIN332 M6
17 0 20 0

139
Ø 20 h6

Ø 20 h6

Motor fr.
63 71 80 L80 90S/L
Dimension
AC 126 141 159 159 178
AD 128 136 145 145 155
k 372 406 414 438 456
kB 416 455 472 496 529
LB 204 238 246 270 288
LB1 248 287 304 328 361

Motor dimension sheets see page 590. Description of motor lengths LB and LB1 see page 594. *Design SS(SB)/SF

544 WG20 Gear Units and Geared Motors www.weg.net

SO032 - B5 flange execution with hollow shaft

kB
k
58,5 109 LB1
S LB 58,5+121) 60 15
14,5
M

Z Z

Ø 57,7
Ø 75,4
Ø AC

ØQ
ØN
45°

T
4 x 90° 15 T
LA

Flange size LA M N Q S T 1)
Incl. hollow shaft protection cap
120 8.5 100 80 j6 120 6.6 3.0
160 9.0 130 110 j6 160 9.0 3.5

SF032 - SP032 -
B5 flange execution with output shaft B5 flange execution
with hollow shaft and shrink disc

88 60 15
58,5 75 40

S
ØQ

ØQ
ØN

ØN
T T
LA LA

ST032 - Hollow shaft with torque arm ** SU032 - Hollow shaft with
shrink disc and torque arm **

270°
45°
5x

15 15

23
180° Side B 13,5 Side A

9,5
110

9,5

R1
8
Ø 10,4

Ø 10,4

58,5 34 34
36 36
90°

Torque arm possible positions:

90 °, 135 °, 180 °, 225 °, 270 °, 315°

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 545

 SH042 - Hollow shaft

kB
k
68 123 LB1 AD
LB 58,5+91) 60

Ø 10
5

Ø 85
Ø AC
166,6

10
100

Ø 84
M8 x 16 52 60 M8 x 24
87 3,5 117
117

1)
Incl. hollow shaft protection cap

28,3 34 40 33,3 34 40

Ø 45

Ø 45
8 H9
8 H9

Ø 30 H7
Ø 25 H7

SD042 - Shrink disc M10 x 40 105 M10 x 40 105

120 120

Ø 30 h6
Ø 25 h6

96,5 60 89 89

S
Ø 85

DIN332 M10 DIN332 M10

SS042 - Output shaft

117 SB042 - Output shaft on both sides
Ø 30 H7

24 20 60/84* 50 50 60 60 50
Ø 30

Ø 25 k6

40 5
8
Ø 45

28

146

+5 +5
DIN332 M10
24 0 20 0

146
Ø 30 h6

Ø 30 h6

Motor fr.
63 71 80 L80 90S/L 100L L100L
Dimension
AC 126 141 159 159 178 199 199
AD 128 136 145 145 155 165 165
k 395 429 437 461 479 529 567
kB 439 478 495 519 552 613 651
LB 204 238 246 270 288 338 376
LB1 248 287 304 328 361 422 460

Motor dimension sheets see page 590. Description of motor lengths LB and LB1 see page 594. *Design SS(SB)/SF

546 WG20 Gear Units and Geared Motors www.weg.net

SO042 - B5 flange execution with hollow shaft

kB
k
68 123 LB1
Ø9 LB 58,5+91) 60 24

Ø 13
0

Ø 110 j6
Z Z

Ø 65,9

Ø 160
Ø AC
10
45°

3,5 3,5
4 x 90°
24 10,5

1)
Incl. hollow shaft protection cap

SF042 - SP042 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc

58,5 84 50 96,5 60 24

S
Ø 110 j6

Ø 110 j6
Ø 160

Ø 160
3,5 3,5
10,5 10,5

ST042 - Hollow shaft with torque arm ** SU042 - Hollow shaft with
shrink disc and torque arm **

270°
0°
8x3

13,5 13,5

18 13,5
180° Side B Side A
130

4,5 4,5

68 34 34
R1

Ø 10,4

Ø 10,4
8

36 36
90°

Torque arm possible positions:

60 °, 90 °, 120 °, 150 °, 180 °, 210 °, 240 °, 270 °, 300 °

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 547

 SH052 - Hollow shaft

kB
k
75 124 LB1 AD
LB 73+91) 75

Ø 13
0

Ø 87
197,4

Ø AC
112

Ø 110
18

60 M10 x 21,5
M8 x 16 58,7
8 146
117
146
1)
Incl. hollow shaft protection cap

33,3 44 50 38,3 44 50

Ø 60

Ø 60
8 H9

10 H9
Ø 30 H7

Ø 35 H7
SD052 - Shrink disc M10 x 40 132 M12 x 50 132
150 150

Ø 35 h6
Ø 30 h6

117,5 75 116 114

S
Ø 87

DIN332 M10 DIN332 M12

SS052 - Output shaft

146 SB052 - Output shaft on both sides
Ø 35 H7

24 20 75/100* 60 60 75 75 60
Ø 35

Ø 30 k6

8 50 5
Ø 60

33

177
DIN332 M10
+5 +5
24 0 20 0

177
Ø 35 h6
Ø 35 h6

Motor fr.
63 71 80 L80 90S/L 100L L100L
Dimension
AC 126 141 159 159 178 199 199
AD 128 136 145 145 155 165 165
k 403 437 445 469 487 537 575
kB 447 486 503 527 560 621 659
LB 204 238 246 270 288 338 376
LB1 248 287 304 328 361 422 460

Motor dimension sheets see page 590. Description of motor lengths LB and LB1 see page 594. *Design SS(SB)/SF

548 WG20 Gear Units and Geared Motors www.weg.net

SO052 - B5 flange execution with hollow shaft

kB
k
75 124 LB1
Ø 11 LB 73+91) 75 25

Ø 16
5 Z Z

Ø 130 j6
Ø 103

Ø 200
Ø AC
45°

18

3,5
25 3,5
4 x 90°
13,5

1)
Incl. hollow shaft protection cap

SF052 - SP052 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc

73 100 60 117,5 75 25

S
Ø 130 j6
Ø 200

Ø 130
Ø 200
3,5 3,5
13,5 13,5

ST052 - Hollow shaft with torque arm ** SU052 - Hollow shaft with
shrink disc and torque arm **

270°
0°
8x3

16,5 16,5

15,5 14,5
180° Side B Side A

1
160

R1
9
75 34 34
Ø 10,4

Ø 10,4

36 36
90°

Torque arm possible positions:

60 °, 90 °, 120 °, 150 °, 180 °, 210 °, 240 °, 270 °, 300 °

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 549

 SH062 - Hollow shaft

kB
k
99,8 151,3/161,51) LB1 AD
LB 82+10 2)
84

Ø 16
5

Ø 107
247,8

Ø AC
140

Ø 140
25

M10 x 21,5 80,5 88 M12 x 19,8

152 164
5
164
1)
Longer value from motor frame size 112 2)
Incl. hollow shaft protection cap

43,3 52 52 48,8 52 52

Ø 80

Ø 80
12 H9

14 H9
Ø 40 H7

Ø 45 H7
SD062 - Shrink disc 144 144
M16 x 50 168 M16 x 50 168

Ø 45 h6
Ø 40 h6

137 84
126 126
S
Ø 107

DIN332 M16 DIN 332 M16

SS062 - Output shaft

164
SB062 - Output shaft on both sides
90/126,5* 70
Ø 40 H7

38 20
Ø 35 k6

56 7 70/80 90 90 70/80
Ø 40

10
Ø 80

38

196
DIN332 M12
90/126,5* 80
+5 +5 70 5
38 0 20 0
Ø 40 k6

12
43

196
Ø 40 h6

Ø 40 h6

DIN332 M16

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M
Dimension
AC 126 141 159 159 178 199 199 221 261 261
AD 128 136 145 145 155 165 165 185 205 205
k 456 490 498 522 540 590 628 610 675 713
kB 500 539 556 580 613 674 712 697 793 831
LB 204 238 246 270 288 338 376 348 413 451
LB1 248 287 304 328 361 422 460 435 531 569

Motor dimension sheets see page 590. Description of motor lengths LB and LB1 see page 594. *Design SS(SB)/SF

550 WG20 Gear Units and Geared Motors www.weg.net

SO062 - B5 flange execution with hollow shaft

kB
k
99,8 151,3/161,51) LB1
Ø 11 LB 82+102) 84 42,5

Ø 165
Z Z

Ø 130j6
Ø 200
Ø 112
Ø AC
45°

3,5
25

42,5 3,5
4 x 90°
12

1)
Longer value from motor frame size 112
2)
Incl. hollow shaft protection cap

SF062 - SP062 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc

82 126,5 70/80 137 84 42,5

S
Ø 130j6

Ø 130j6
Ø 200

Ø 200
3,5 3,5
12 12

ST062 - Hollow shaft with torque arm ** SU062 - Hollow shaft with
shrink disc and torque arm **

270°

45°
5x

18 18

16 16
180°
Side B Side A
200

R2
1
Ø 10,4
Ø 10,4

99,8 31 31
36 36
90°
Torque arm possible positions:
90 °, 135 °, 180 °, 225 °, 270 °, 315 °

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 551

 SH072 - Hollow shaft

kB
k
119 176,3/186,31) LB1 AD
LB 101+122) 105

Ø 19
5

Ø 122
Ø AC
305,8
180

Ø 170
23

M12 x 19,8 85 102 M16 x 34,5

170 5 202
202
1)
Longer value from motor frame size 112 2)
Incl. hollow shaft protection cap

53,8 M16 x 50 75 67 64,4 M20 x 70 67 67

Ø 95

Ø 95
14 H9

18 H9
Ø 50 H7

Ø 60 H7
SD072 - Shrink disc 183 180
210 210

Ø 60 h6
Ø 50 h6

175 105 158

165
S
Ø 122

DIN332 M16 DIN 332 M20

SS072 - Output shaft

202 SB072 - Output shaft on both sides

105/150,5* 90
Ø 50 H7

36 30
Ø 50

80 5
Ø 45 k6

14
Ø 95

90/100 105 105 90/100

48,5

241
DIN332 M16
+5
36 0
+5
30 0 105/150,5* 100
80 10
Ø 50 k6

14
53,5

241
Ø 50 h6

Ø 50 h6

DIN332 M16

Motor fr.
63 71 80 L80 90S/L 100L L100L 112M 132S,M L132M
Dimension
AC 126 141 159 159 178 199 199 221 261 261
AD 128 136 145 145 155 165 165 185 205 205
k 500 534 542 566 584 634 672 654 719 757
kB 544 583 600 624 657 718 756 741 837 875
LB 204 238 246 270 288 338 376 348 413 451
LB1 248 287 304 328 361 422 460 435 531 569

Motor dimension sheets see page 590. Description of motor lengths LB and LB1 see page 594. *Design SS(SB)/SF

552 WG20 Gear Units and Geared Motors www.weg.net

SO072 - B5 flange execution with hollow shaft

kB
k
119 176,3/186,251) LB1
Ø 13,5 LB 101+122) 105 45,5

Ø 215
Z Z

Ø 141,8

Ø 250
180 j6
Ø AC
45°

23

4
45,5 4
4 x 90°
15

1)
Longer value from motor frame size 112
2)
Incl. hollow shaft protection cap

SF072 - SP072 - B5 flange execution

B5 flange execution with output shaft with hollow shaft and shrink disc

101 150,5 90/100 175 105 45,5

Ø 180 j6
Ø 250

Ø 250
180 j6

4 4
15 15

ST072 - Hollow shaft with torque arm ** SU072 - Hollow shaft with
shrink disc and torque arm **

270°

45°
5x

18 18

Side B Side A
14 14
180°
250

14,5 14,5

R2
7,5
119 54 54
Ø 16,4
Ø 16,4

60 60
90°
Torque arm possible positions:
90 °, 135 °, 180 °, 225 °, 270 °, 315 °

Dimensions in mm. ** Torque arm may be mounted on side A or side B.

www.weg.net WG20 Gear Units and Geared Motors 553

S

554 WG20 Gear Units and Geared Motors www.weg.net

Dimension sheets Input types

S
www.weg.net WG20 Gear Units and Geared Motors 555
 IEC Adapter I63 to I132

l
la

f
m

Ød
Ø n H7

ga
p
Ød

t s
E
α

Type I63 I71 I80 I90 I100 I112 I132

p 154 154 200 200 250 250 300

n 95 110 130 130 180 180 230
la 22.5 10 13 13 15 20 15
m 115 130 165 165 215 215 265
t 4.5 4.5 4.5 4.5 5 5 5
s M8x16 M8x10 11 11 13.5 13.5 13.5

S α
α1
90
35
90
45
90
45
90
45
90
45
90
45
90
45
d 11 14 19 24 28 28 38
f 4 5 6 8 8 8 10
ga 12.8 16.3 21.8 27.3 31.3 31.3 41.3
E 1) 25 32 43 47.5 63 100 85.5
1) Maximum motor shaft length for motors with key

I63 I71 I80 I90 I100 I112 I132

Gear unit
size
l
S03 141 141 169 169 200 - -
S04 155 155 183 183 214 - -
S05 156 156 184 184 215 - -
S06 183.5 183.5 211.5 211.5 242.5 296 307
S07 208.5 208.5 236.5 236.5 267.5 320.5 331.5

Dimensions in mm.

556 WG20 Gear Units and Geared Motors www.weg.net

NEMA Adapter N56 to N213/215

l
la

f
m

Ød
Ø n H7

ga
p
Ød

t s
E
α

Type N56 N143/145 N182 N184 N213/215

p 170 170 250 250 300

n 114.3 114.3 215.9 215.9 215.9
la 13 13 10 16.8 10
m 149.225 149.225 184.15 184.15 184.15
t 4.5 4.5 5 3.2 5
s 11 11 14 14 14
α
α1
90
45
90
45
90
45
90
45
90
45
S
d 15.875 22.225 28.575 28.575 34.925
f 4.775 4.775 6.350 6.350 7.950
ga 18.008 24.486 31.521 31.521 38.557
E 1) 55 55 67.5 96.8 80.5
1) Maximum motor shaft length for motors with key

N56 N143/145 N182 N184 N213/215

Gear unit
size
l
S03 169 169 200 - -
S04 183 183 214 - -
S05 184 184 215 - -
S06 211.5 211.5 242.5 296 307
S07 236.5 236.5 267.5 320.5 331.5

www.weg.net WG20 Gear Units and Geared Motors 557

 SERVO Adapter S92 to S190

l Shaft with key

f
Ia

ga
m

Ød
Ød

Ø n H7
p
Smooth shaft

s
t
E Ød
α

Type S92 S105 S114 S115 S130 S141 S142 S180 S189 S190

p 101 144 144 144 144 144 144 197 197 197
n 80 95 95 110 110 110 130 114.3 130 180
la 17.5 31 31 31 31 31 31 35 32 38
m 100 115 130 130 145 165 165 200 215 215
t 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5
s M6x12 M8x16 M8x16 M8x16 M8x16 M8x16 M8x16 13.5 15 15

S α
α1
90°
45°
90°
45°
90°
45°
90°
45°
90°
45°
90°
45°
90°
45°
90°
45°
90°
45°
90°
45°
d 1) 14 16 19 19 19 24 19 24 19 22 24 28 24 24 32 35 32 38 38
f 5 5 6 6 6 8 6 8 6 6 8 8 8 8 10 10 10 10 10
ga 16.3 18.3 21.8 21.8 21.8 27.3 21.8 27.3 21.8 24.8 27.3 31.3 27.3 27.3 35.3 38.3 35.3 41.3 41.3
E 2) 46 46 34 67 67 54 67 54 76 63 63 63 54 63 63 66 74 60 87
E 3) 46 46 46 67 67 67 67 67 76 76 76 63 67 76 63 87 74 60 87
1) Other shaft diameters on request
2) Maximum motor shaft length for motors with key
3) Maximum motor shaft length for motors with smooth shaft

S92 S105 S114 S115 S130 S141 S142 S180 S189 S190
Gear unit
size
l
S03 206.5 254.5 254.5 254.5 254.5 254.5 254.5 - - -
S04 220.5 268.5 268.5 268.5 268.5 268.5 268.5 - - -
S05 221.5 269.5 269.5 269.5 269.5 269.5 269.5 - - -
S06 249 297 297 297 297 297 297 368 362 389
S07 274 322 322 322 322 322 322 392.5 386.5 413.5

Dimensions in mm.

558 WG20 Gear Units and Geared Motors www.weg.net

Input Unit U2, U3

l
Z X

ØD
ØN

GA
ØD
E R

Input shaft [mm]

Type 19x40 24x50

U2 U3
D 19 24
F 6 8
GA 21.5 27
E 40 50 Tolerances
N 73 101
Dimension name ISO tolerance DIN EN ISO 286-2
S
X 2 2.5
D < Ø 55 mm k6
Z 3 35
R M6 M10

Input shaft [mm]

19x40 24x50
Gear unit
size
U2 U3

l
S03 169 -
S04 183 -
S05 184 -
S06 211.5 244
S07 236.5 268.5

www.weg.net WG20 Gear Units and Geared Motors 559

S

560 WG20 Gear Units and Geared Motors www.weg.net

Modular System Motor

M
 Terminal box designs
page 596

Brake systems
M and back stops
page 599

Encoder systems
page 610

Ventilation systems
page 613

562 WG20 Gear Units and Geared Motors www.weg.net

 Motor series 14 and 11
with aluminium housing Motor series 22
(frame sizes 63 - 132) with cast iron housing
(frame sizes 160 - 280)

The modular motor system

Our motor system is an optimised and modularly designed kit. It includes harmonised modules like brakes, encoders, forced
ventilation and connecting systems which are combined to the customer's requirements.
The significant advantage of this concept offers fast and reliable delivery times, not only to our local customers but also interna-
tionally, because WEG’s competent sales network and assembling centres guarantee the availability of components worldwide.

Detailed description of the motor modules see from page 595.

www.weg.net WG20 Gear Units and Geared Motors 563

 The modular system motor
Five motor series are used for the modular system motor:

Multi-Voltage-Motor:
Motor series 14P (Aluminium), IEC frame sizes 63 to 80 (up to 0.55 kW)

Advantages
▪ Efficiency class: IE3
▪ Voltages:
230/400 V - 50 Hz
265/460 V - 60 Hz
▪ Frequency inverter operation up to 87/105 Hz
▪ Ambient temperature -20 bis +40 °C
▪ Nameplate with 50/60 Hz data
▪ Flexible adjustment of the terminal box
▪ Reinforced bearings (integral motor)
▪ Shaft system for immediate assembling of motor modules, like encoders, brakes, back stop, etc.
▪ Standard degree of protection IP55
▪ Thermal protection with bimetal switch and PTC thermistor
▪ Thermal class F
▪ System motor, prepared for flexible assembling of motor modules
▪ Certified for worldwide distribution: CE, UKCA, CSA, UL, EAC, CCC
EUSAS®-Motor:
Motor series 11P (Aluminium), IE3, IEC frame sizes 80 to 132 (0.75 - 9.2 kW)
Motor series 22P (Cast iron), IE3, IEC frame sizes 160 to 225 (11 - 55 kW)
Motor series 11S (Aluminium), IE4, IEC frame sizes 63 to 132 (0.12 - 5.5 kW)
Motor series 22S (Cast iron), IE4, IEC frame sizes 132 to 280 (7.5 - 110 kW)

Advantages
▪ Efficiency class: IE3, IE4
▪ Wide-range winding
▪ Voltage switchable to all common world voltages (rated voltage):
M

115-460 V - 50/60 Hz up to frame size 100
200-690 V - 50/60 Hz frame sizes 112 to 280
▪ Frequency inverter operation 100/120 Hz
▪ Ambient temperature -20 bis +40 °C
▪ Nameplate with 50/60 Hz data
▪ Flexible adjustment of the terminal box
▪ Reinforced bearings (integral motor)
▪ Shaft system for immediate assembling of motor modules, like encoders, brakes, back stop, etc.
▪ Standard degree of protection IP55
▪ Thermal protection with bimetal switch and/or PTC thermistor
▪ Thermal class F
▪ System motor, prepared for flexible assembling of motor modules
▪ Certified for worldwide distribution: CE, UKCA, CSA, UL, EAC
The ideal motor for frequency inverter operation
Switchable to 100/120 Hz. Simply switch over and use the double output.
The excellent combination of the modular system motor and variable speed drives by WEG (type CFW for various applications
and decentralised motor drive MW500) enables drive systems with wide speed range.

M P
100% 200%
EUSAS PLUS
EUSAS PLUS
100%
STANDARD MOTOR
STANDARD MOTOR

50(60)Hz 100(120)Hz f 50(60)Hz 100(120)Hz f

Rated torque up to double rated speed Two times rated power at double rated speed

564 WG20 Gear Units and Geared Motors www.weg.net

Type code

11P-EX-L100L-04F-LT-TH-SH-K1-KB-MIP-BR..-SG-FL-SD
1 2 3 4 3 5 6 7 8 9 10 11 12 13 14 15 16

1 Motor series: 14P = Aluminium motor in energy efficiency class IE3, frame sizes 63 - 80 (up to 0.55 kW)
11P = Aluminium motor in energy efficiency class IE3, frame sizes 80 - 132 (0.75 - 9.2 kW)
22P = Cast iron motor in energy efficiency class IE3, frame sizes 160 - 225 (11 - 55 kW)
11S = Aluminium motor in energy efficiency class IE4, frame sizes 63 - 132 (0.12 - 5.5 kW)
22S = Cast iron motor in energy efficiency class IE4, frame sizes 132 - 280 (7.5 - 110 kW)

2 ATEX execution: when operated in explosive atmospheres, see page 573

3 Stator length: L.
.S
.S/L
.S/M
.M
.L

4 IEC frame size: 63 112 225

71 132 250
80 160 280
90 180
100 200

5 Number of poles: 04 = 4 poles
06 = 6 poles

6 Power indicator: D M
E
F
G

7 High/Low temperatuer execution: see page 595

8 Temperature control: see page 595

9 Anti-condensation heating: see page 595

10 Climatic protection: see page 596

11 Drain: see page 596

12 Terminal box designs: see page 596

13 Brake systems, back stop: see page 599

14 Encoder systems: see page 610

15 Ventilation systems: see page 613

16 Additional modules: see page 615

www.weg.net WG20 Gear Units and Geared Motors 565

 Options
1. Basic execution
IEC frame size
Description Key Page
63 71 80 90 100 112 132 160 180 200 225 250 280

Switchable voltage (4 connections) - 573

Temperature controller for switch off (+155 °C) TH 595

PTC thermistor protection for switch off (+155 °C) TF 595

Thermal class F (up to +155 °C) - 573

Fixed bearing NDE - - - - - - - -

Fixed bearing DE - - - - - - - - -

Degree of protection IP55 - 17

Certifications (CE, UKCA, EAC, UL, CSA: all / *CCC: up to 0.55 kW) - -
* * *
2. Electrical options
IEC frame size
Description Key Page
63 71 80 90 100 112 132 160 180 200 225 250 280

Special voltage SPECI-Volt - 573

Temperature controller for warning and switch off 2TH 595

PTC thermistor protection for warning and switch off 2TF 595

Temperature sensor KTY KTY 595

Temperature sensor Pt100 - -

Anti-condensation heating 230 V SH 595 -

Thermal class H (up to +180 °C) - -

3. Mechanical options
IEC frame size
Description Key Page
63 71 80 90 100 112 132 160 180 200 225 250 280
M Degree of protection IP56 - 17

Degree of protection IP65 - 17

Degree of protection IP66 - 17

Degree of protection IP67 - 17

High temperature execution (max. +80 °C ambient temperature) HT 595

Low temperature execution LT 595

ATEX zone 2+22: II 3G Ex ec IIC T3 Gc / II 3D Ex tc IIIC T125°C Dc EX 573

Humidity protection K1 K1 596

Corrosion protection K2 K2 596

Drain KB 596

Multipin box MIP 596

Multi-plug-connect systems MIG.. 597 - - - -

Multi-plug-connect system for forced ventilation MIG10-FL 597 -

Non-ventilated without NDE shaft end U 614

Non-ventilated with NDE shaft end UW 614

Different position of the terminal box - -

Relubrication - - - - - - - - -

Standard Special execution (on request)

Optional - Not available

566 WG20 Gear Units and Geared Motors www.weg.net

4. Options - motor modules
IEC frame size
Description Key Page
63 71 80 90 100 112 132 160 180 200 225 250 280

Spring loaded brake - IP55, 24 V BR.. 603

Spring loaded brake - IP55, 102 V BR.. 603

Spring loaded brake - IP55, 190 V, 195 V BR.. 603

Double spring loaded brake in low noise execution BBRHGD.. 604 -

Totally closed spring loaded brake - IP66 BRGH.. 605 -

Manual release for brake (BR)H.. 603 1)

Locking device for manual release (BR)HA.. 603 1)

Corrosion protection IP55 for brake (BR)R.. 603

Dust protection IP65 for brake (BR)S.. 603 1)

Corrosion and dust protection IP65 for brake (BR)SR.. 603 1)

Brake in low noise execution (BR)GD.. 603 -

Micro switch (BR)M 603 2) 2) 2)

Anti-condensation heating for brakes - 605 - -

Fast excitation rectifier - 607

Back stop KKM KKM 609 - - - - - - - - -

Back stop RSM RSM 609 - - - -

Encoder outside the fan cover I. 610

Encoder inside the fan cover S. 610 -

Encoder (1024 pulses, HTL/TTL, IP66) .G 610 I. S.

Mating plug for encoder without cable - - I. S.

Mating plug for encoder with cable - - I. S.

SINCOS encoder .C 610 - - I. S. I. S.

Resolver .R 610 - - - -

Special encoder .A 611

SSI multiturn encoder SS 611 -

Heavy Duty encoder SV 611 - - - - M

Forced ventilation (TEFV) FL 613

Fly wheel fan ZL 614 - - - - - - -

Hand wheel HR 615 - -

Protection cap SD 615

Protection cap for encoders ID 615 - - -

Second shaft end - module shaft ZWM 616 -

Second shaft end - solid shaft ZWV 616 - - -

5. Additional options
IEC frame size
Description Key Page
63 71 80 90 100 112 132 160 180 200 225 250 280

Special nameplate (aluminium) - -

Second nameplate (not fixed, aluminium or stainless steel) - -

Metal fan ZM 614

Vibration severity grade "B“ (reduced) according to DIN IEC 60034-14 - 573

Wide range grease (-40 °C to +175 °C) - -

1) not possible with 2 Nm brake
2) Micro switch not possible for totally closed brakes at 2 and 5 Nm

Standard Special execution (on request)

Optional - Not available

www.weg.net WG20 Gear Units and Geared Motors 567

 General information - IE3 motors
Frame size 63 71 (L)80 90S/L (L)100L 112M (L)132M,S 160M,L 180M,L 200L 225S/M
Mechanical features
Mounting form B14R B5R
Housing material aluminium EN AC-46100 cast iron EN GJL-200
Degree of protection IP55
double - in the terminal
Grounding simple grounding - one inside the terminal box
box and on the frame
Cooling method fan - IC411 (TEFC)
Fan material polypropylen aluminium
Fan cover material Stahlblech
Endshields material aluminium EN AC-46100 * cast iron EN GJL-200
Drain rubber drain plug
internal + external
without bearing cap
Locking without bearing cap with circlip - NDE bearing cap and spring
with circlip - DE
Bearings washers - NDE
DE 6203 ZZ 6204 ZZ 6205 ZZ 6305 ZZ 6207 ZZ 6307 ZZ 6309 ZZ 6309 ZZ-C3 6312 ZZ-C3 6314 ZZ-C3 6314 ZZ-C3
NDE 6201 ZZ 6203 ZZ 6203 ZZ 6205 ZZ 6206 ZZ 6206 ZZ 6308 ZZ 6209 ZZ-C3 6211 ZZ-C3 6212 ZZ-C3 6314 ZZ-C3
Type radial shaft seal
DE 17x30x7 20x30x7 25x40x7 25x40x7 35x52x7 35x52x7 45x60x8 45x60x8 60x90x10 60x90x10 60x90x10 / 70x90x10 **
Shaft seal
NDE 12x22x7 17x28x5 17x28x5 25x35x7 30x40x4 30x40x4 40x56x8 45x62x7 55x70x8 60x75x8 70x85x8
Material NBR
Type of grease Mobil Polyrex EM
Lubrication
Grease fitting without grease fitting
Terminal block 6 poles 9 poles
Terminal box material aluminium EN AC 47000 cast iron EN GJL-200
Main 2 x M25x1.5 2 x M32x1.5 2 x M40x1.5 2 x M50x1.5 2 x M50x1.5
Cable entry Accessory 2 x M16x1.5
Plug threaded plug for transport and storage; cable gland optional
1.7225 - 42CrMo4 -
Shaft material 1.0511/1.1191 – C40/C45E – AISI 1040/45
AISI 4140
Direction of rotation both directions
Vibration class A
Nameplate material stainless steel 1.4301 (AISI 304)

FR-200 FR-250
M Flange FC-120 FC-160
FR-250
FR-300
FR-300
FR-400
FR-300
FR-400
FR-400
FR-550
FR-400 FR-550
FR-550
FR-550

Frame size 63 71 (L)80 90S/L (L)100L 112M (L)132M,S 160M,L 180M,L 200L 225S/M
Electrical features
Power [kW] 4 poles 0.12 0.18 0.25 0.37 0.55 0.75 1.1 1.5 2.2 3.0 4.0 5.5 7.5 9.2 11 15 18.5 22 30 37 45 55
230 V (50Hz) 400 V (50 Hz)
Δ
265 V (60Hz) 460 V (60 Hz)
115 V (50 Hz) 200 V (50 Hz)
ΔΔ -
Voltage / 132 V (60Hz) 230 V (60 Hz)
Frequency 400 V (50 Hz) 690 V (50 Hz)
Y
460 V (60 Hz) -
200 V (50 Hz) 346 V (50 Hz)
YY -
230 V (60 Hz) 400 V (60 Hz)
Power [kW] 6 poles 0.12 0.18 0.25 0.37 0.55 0.75 1.1 1.5 2.2 3.0 4.0 5.5 - - - -
230 V (50Hz) 400 V (50 Hz)
Δ - - - -
265 V (60Hz) 460 V (60 Hz)
115 V (50 Hz) 200 V (50 Hz)
ΔΔ - - - - -
Voltage / 132 V (60Hz) 230 V (60 Hz)
Frequency 400 V (50 Hz) 690 V (50 Hz)
Y - - - -
460 V (60 Hz) -
200 V (50 Hz) 346 V (50 Hz)
YY - - - - -
230 V (60 Hz) 400 V (60 Hz)
Efficiency class IE3
Design N
continuous
Impregnation dip
Winding flow impregnation
Insulation class F (DT 80K)

* Except frame sizes L100L and L132M: endshield (NDE) made from cast iron EN GJL-200
** 22S-225S/M-04F / 22S-225S/M-04G

568 WG20 Gear Units and Geared Motors www.weg.net

General information - IE4 motors
Frame size 63 71 (L)80 (L)90S/L 100L (L)112M (L)132M,S 132M/L 160M,L 180M,L 200L 225S/M 250S/M 280S/M
Mechanical features
Mounting form B14R B5R
Housing material aluminium EN AC-46100 cast iron EN GJL-200
Degree of protection IP55
double - in the terminal box
Grounding simple grounding - one inside the terminal box
and on the frame
Cooling method fan - IC411 (TEFC)
Fan material polypropylen aluminium polypropylen aluminium
Fan cover material sheet steel
Endshields material aluminium EN AC-46100 * cast iron EN GJL-200
Drain rubber drain plug
internal + external
without bearing cap
Locking without bearing cap with circlip - NDE bearing cap and spring washers -
with circlip - DE
Bearings NDE
DE 6203 ZZ 6204 ZZ 6205 ZZ 6305 ZZ 6207 ZZ 6307 ZZ 6309 ZZ 6309 ZZ 6309 ZZ-C3 6312 ZZ-C3 6314 ZZ-C3 6314 ZZ-C3 6316 ZZ-C3 6319 ZZ-C3
NDE 6201 ZZ 6203 ZZ 6203 ZZ 6205 ZZ 6206 ZZ 6206 ZZ 6308 ZZ 6308 ZZ 6209 ZZ-C3 6211 ZZ-C3 6212 ZZ-C3 6314 ZZ-C3 6314 ZZ-C3 6316 ZZ-C3
Type radial shaft seal
DE 17x30x7 20x30x7 25x40x7 25x40x7 35x52x7 35x52x7 45x60x8 45x60x8 45x60x8 60x90x10 60x90x10 60x90x10 70x90x10 95x115x13
Shaft seal NDE 12x22x7 17x28x5 17x28x5 25x35x7 30x40x4 30x40x4 40x56x8 40x56x8 45x62x7 55x70x8 60x75x8 70x85x8 70x85x8 80x100x10
DE-FKM
Material NBR
NDE-NBR
Type of
Mobil Polyrex EM
grease
Lubrication
Grease
without grease fitting
fitting
Terminal block 9 poles
Terminal box material aluminium EN AC 47000 cast iron EN GJL-200
Main 2 x M25x1.5 2 x M32x1.5 2 x M40x1.5 2 x M50x1.5 2 x M63x1.5
Cable
Accessory 2 x M16x1.5
entry
Plug threaded plug for transport and storage; cable gland optional
Shaft material 1.0511/1.1191 – C40/C45E – AISI 1040/45 1.7225 - 42CrMo4 - AISI 4140
Direction of rotation both directions
Vibration class A
Nameplate material stainless steel 1.4301 (AISI 304)

FR-200
M
FR-250
FR-250 FR-300
FR-300 FR-400 FR-400
Flange FC-120 FC-160 FR-300 FR-400 FR-550
FR-400 FR-550 FR-550
FR-400 FR-550
FR-550
FR-550

Frame size 63 71 (L)80 (L)90S/L 100L (L)112M (L)132M,S 132M/L 160M,L 180M,L 200L 225S/M 250S/M 280S/M
Electrical features
Power [kW] 4 poles 0.12 0.18 0.25 0.37 0.55 0.75 1.1 1.5 2.2 3.0 4.0 5.5 7.5 9.2 11 15 18.5 22 30 37 45 55 75 90 110
Efficiency class IE4
Design N
230 V (50Hz) 400 V (50 Hz)
Δ
265 V (60Hz) 460 V (60 Hz)
115 V (50 Hz) 200 V (50 Hz)
ΔΔ
Voltage / 132 V (60Hz) 230 V (60 Hz)
Frequency 400 V (50 Hz) 690 V (50 Hz)
Y
460 V (60 Hz) -
200 V (50 Hz) 346 V (50 Hz)
YY
230 V (60 Hz) 400 V (60 Hz)
Im- continuous
dip
pregnation flow impregnation
Winding
Insulation
F (DT 80K)
class

* Except frame sizes L132M: endshield (NDE) made from cast iron EN GJL-200

www.weg.net WG20 Gear Units and Geared Motors 569

 1. Nameplate
The stainless steel plate is fixed on the frame and bears data for
50 Hz and 60 Hz. The information on the nameplate contains all
relevant specifications of the product (see examples for motor
frame sizes 80, 132 and 180).

M 2. Voltage and frequency fluctuations Δ Voltage [%]

According to DIN EN 60034-1, a distinction is made
between range A and range B (outside A) for voltage +10
and frequency fluctuations. Range A and range B B
describe the permissible range in which frequency and
voltage levels are permitted to deviate from the relevant +5
measurement point (see illustration). The coordinate A
mean point “0” identifies the measurement point for the +3
frequency and voltage in each case. The motor must 0
be able to issue the rated torque in both ranges -5 -2 +2 +3 Δ Frequency [%]
A and B. -3

Range A -5
In continuous operation in range A, the characteristics -7
are permitted to vary from the rated operation, and the
heating at the limits of range A can be around 10 K -10
higher.

Range B Ranges A and B according to DIN EN 60034-1

The deviations from the characteristics are permitted
to be greater than in range A, the heating levels can
be higher than at the measurement point. Duration and frequency of operation in range B should be limited. Corrective
measures, e.g. power reduction, should be provided. If a machine has multiple rated voltages or a rated voltage range,
the permissible voltage and frequency fluctuations apply for each individual value of the rated voltage.

570 WG20 Gear Units and Geared Motors www.weg.net

3. Modes of operation
Duty type according to DIN EN 60034-1 and VDE 0530-1.
The duty type is designated by the abbreviations S1 to S10. For the duty types S4, S5 and S7 the duty cycles/hour (c/h)
and the factor of inertia FI should also be stated at the bottom.
The factor of inertia FI is the ratio of the total load moment of inertia (referred to the motor shaft) and the motor moment
of inertia, to the motor moment of inertia, i.e.

∑Jex.red + Jmot
FI = Jmot

Definition Example

S1 Continuous running duty with constant load S1

Short-time duty with constant load S2

S2
Duration of operation under rated conditions (recommended values: 10, 30, 60 or 90 min) 10 min

Intermittent periodic duty. Motor temperature not affected by starting operation S3

S3 Cyclic duration factor (recommended values: 15, 25, 40 or 60 %): 25 %
Cycle duration (10 min unless otherwise stated) 60 min

Intermittent periodic duty. Motor temperature affected by starting operation S4

S4 Cyclic duration factor (recommended values: 15, 25, 40 or 60 %): 40 %
Indication of the duty cycles per hour and of the factor of inertia FI 200, FI =2

Intermittent periodic duty. Motor temperature affected by starting operation and electric braking S5
S5 Cyclic duration factor (recommended values: 15, 25, 40 or 60 %): 15 %
Indication of the duty cycles per hour and of the factor of inertia FI 300, FI =1

Continuous operation periodic duty. S6

S6 Cyclic duration factor (recommended values: 15, 25, 40 or 60 %): 25 %
Cycle duration (10 min unless otherwise stated) 60 min

Continuous operation with starting and electric braking S7

S7
Indication of the duty cycles per hour and of the factor of inertia FI 200, FI =1

Continuous operation with related load/speed changes (Sequence of similar cycles) S8

Speeds during the duty cycle 3000min-1, 10 min
S8
Periods for which these speeds are maintained during the duty cycle 1500 , 15 min
min-1

Indication of the factor of inertia FI FI =1.5

S9 Continuous operation duty with unrelated load/speed changes S9

S10 Duty with discrete constant loads and speed

S10
FI =0.6
M
Legend see page 606.

4. Rated power according to VDE 0530-1

The listed rated power of the motor corresponds to the output power according to VDE 0530-1 for continuous operation
S1, frequency 50/60 Hz, max. ambient temperature +40 °C, max. altitude 1000 m above sea level.
According to this standard at rated values (voltage and frequency) the motors may be overloaded for two minutes by 1.5
times the rated current, without damage of the winding.
The motors are calculated by rated values according to thermal class B, but produced in class F and by operation with
rated values fit for higher loads:

a. At rated power and rated voltage the ambient temperature may be increased from +40 °C to +60 °C.

b. Provided that ambient temperature does not exceed +40 °C, the normal capacity in continuous operation can be
increased by appr. 10 %.

All technical data stated applies to rated frequency of 50 Hz and supply voltage of 400 V rated voltage at rated power.If
the load changes, the stated values will deviate to higher or lower.

www.weg.net WG20 Gear Units and Geared Motors 571

 5. Power correction factors

S2 S3 S6
Time Poles Poles Poles
Motor frame size DC [%] Motor frame size DC [%] Motor frame size
[min] 2 4-8 2 4-8 2 4-8
15 1.20 1.25 15 1.15 1.40 15 1.20 1.30
30 63 - 132 1.05 1.10 25 1.10 1.30 25 1.15 1.25
63 - 132 63 - 132
60 1.00 1.00 40 1.05 1.20 40 1.10 1.20
15 1.40 1.45 60 1.03 1.10 60 1.05 1.15
30 160 - 200 1.20 1.25 15 1.30 1.40 15 1.25 1.30
60 1.10 1.10 25 1.20 1.30 25 1.20 1.25
160 - 200 160 - 200
15 1.45 1.45 40 1.10 1.20 40 1.15 1.20
30 225 - 280 1.30 1.30 60 1.05 1.10 60 1.10 1.15
60 1.15 1.15 15 1.35 1.40 15 1.30 1.35
25 1.25 1.30 25 1.25 1.30
- Factors for low voltage safe area motors with 225 - 280 225 - 280
40 1.15 1.20 40 1.15 1.25
insulation class F/B (ΔT80K)
- The breakdown torque should be at least 60 1.05 1.10 60 1.10 1.15
30 % higher than factors

6. Torque
The motors are fitted with squirrel-cage rotors suitable for direct online starting. The values of starting torque and break-
down torque, expressed as a multiple of the rated torque, are given in the performance data. A deviation in the voltage
from rated value changes the torques as an approximate function of the square of the voltages.

7. Efficiency class
Standard IEC 60034-30 defines uniform efficiency classes, valid for 2, 4, 6 and 8 pole asynchronous motors (50/60 Hz)
with output powers of 0.12 kW to 1,000 kW. This standard divides 3-phase induction motors with cage rotor in efficien-
cy classes IE1=standard efficiency, IE2=high efficiency, IE3=premium efficiency and IE4=super premium efficiency. Our
motors are labelled with efficiency class and factor on the nameplate.

8. Motor protection
The correct selection of protective equipment determines essen-tially the operation reliability and service life of motors.
Current dependent protection and thermal protective devices are available. Fuses do not protect the motor against over-
loads, they only protect the supply cables or switchboards against short circuits.

9. Overload protection (protection relay)

It is recommended to use starters with thermal overload pro-tection. The over-
M loads should be adjusted to the rated current shown on the nameplate. Thermal
protective devices (thermistors in windings) see page 595.

10. Speed and rotation direction

The rated speed is valid for the rated dates (voltage, frequency). The synchronous
speed depends on the line frequency.
The motors are able for operation in both directions. By connection of U1, V1, W1
to L1, L2, L3 the rotation will be to the right if you look at the shaft from the drive- Left rotation Right rotation
side. Left direction can be easily made by changing of two wires. Rotation direction

11. Cable entry

For all frames, the terminal box can be rotated in 90° increments. Terminal boxes are not delivered with cable glands in
standard. Motors are supplied with plastic threaded plugs in the cable entries to maintain the degree of protection during
transport and storage. In order to guarantee the degree of protection, cable entries must comply with at least the same
degree of protection indicated on the motor nameplate.

Side I
Side IV Side III
Side II

Side designation for cable entries

572 WG20 Gear Units and Geared Motors www.weg.net

12. Motors for the Ex area according to Directive 2014/34/EU
The modular integral motors can be used in both safe area applications and explosion-proof areas. The motors are
certified for category 3, zone 2+22.

Zone 2: II 3G Ex ec IIC T3 Gc
Zone 22: II 3D Ex tc IIIC T125°C Dc

The protection types in this case are increased safety (Ex ec) and protection by means of housing (Ex tc).
The motors can be used in a temperature range of -20 to +40 °C.

If temperatures deviate or additional motor options (brakes, encoders, etc.) are required, please contact us beforehand.

13. Cooling
The motors are totally enclosed fan cooled (TEFC) by means of external surface ventilation (IC411, as per IEC 60034-6).
Maximum ambient temperature +40 °C. Please check the minimum distance “Y” (see dimension sheets from page 590)
between cover and wall by mounting the motor.

▪ Integral fans (TEFC, IC411)

Particular attention has been dedicated to the shape in order to reduce noise and improve the efficiency of the motor.
Radial construction has been selected to allow rotation in both directions.

▪ Fan cover
In treated steel plate, properly profiled to improve efficiency and reduce the noise produced by the fan.

▪ Forced ventilation (TEFV, IC416) see also page 613

For special operating conditions, e.g. increased permissible number of operations per hour or variable speed operation,
the motors of IEC sizes 63 to 200 can be supplied with forced ventilation by means of a separately fitted fan motor.

14. Insulation
The motors in this catalogue comply with the requirements of thermal class F. All windings are impregnated with var-
nish with a high mechanical strength. The maximum temperature of the insulation is, according to thermal class F, at
+155 °C. The motors are utilised at rated values according to thermal class B (+130 °C). Copper wire insulation and the
impregnation varnish have a temperature index class F and therefore there is a large margin of safety in addition to high
overload capacity. Motors from frame size 160 are equipped with the WISE® insulation system of the new W22 motor
range by WEG.
M
15. Noise levels Noise level - dB(A), Distance: 1 meter
Noise measurements were taken in accordance with standard Frame
50 Hz 60 Hz
size
IEC 60034-9 (see table to the right). 4p 6p 4p 6p
63 44 43 48 47
16. Balancing of rotors 71 43 43 47 47
Motors comply with vibration strength level "A" according to standard 80 44 43 48 47
IEC 60034-14. On request, motors may also be balanced according to 90 49 45 51 49
level "B". 100 53 44 54 53
112 56 52 56 52
17. Shaft ends 132 56 53 58 55
Shaft ends of motors in frame sizes 63 up to 132 are equipped with a 160 61 - 64 -
conical bore and do not have a key, while the frame sizes 160 to 250 180 61 - 64 -
have a shaft with closed end keyway. On the non-driven side, modular 200 65 - 68 -
motors have a system shaft to mount motor modules, such as brakes, 225 66 - 70 -
encoders, back stops, etc. 250 64 - 68 -
280 69 - 73 -
18. Voltage, current and frequency
In standard execution the motors are delivered with following rated voltages: see chapter 19 (basic connection).

Special voltages
Motors for special voltages and/or frequencies are available on request.

Speed and connection

Tolerance of the motor speed according to IEC 60034. Terminal board connection see page 574.

www.weg.net WG20 Gear Units and Geared Motors 573

 Connection
▪ Direct connection
The starting torque in direct connection amounts to 160 to 330 % of the rated torque, depending on power and number
of poles. The starting current is about 2.5 to 8 times of the rated current.

▪ Star-delta starting
The star-delta (Y-D) starting is an easy way to reduce the starting current and starting torque. Motors can be started with
this starting method whenever the supply voltage corresponds to the rated voltage of the motors in delta connections.
Up from frame size 112 the standard modular motors are supplied with windings designed for this starting method (e.g.
400 V D / 690 V Y). A Y-D-starting is only possible with delta service connection (this shall be considered when selecting
a motor!), as the motor is first Y-connected and is changed over to D-connection after the run-up phase. At Y-D-starting,
the starting currents and torques will be reduced to about 1/3 of the values produced in case of direct-online starting.
Attention should be paid to the fact that a current impulse is produced when changing over to D-connection.

19. Electrical connection

IE3: Motor series 14P (IEC frame sizes 63 to 80)

Rated voltage*

Possible connection Rated power P N Increased rated power 1,2 x P N Frequency inverter operation

230 V at 50 Hz -
Delta 400 V, 87 Hz
265 V at 60 Hz 265 V at 60 Hz

Star 400 V at 50 Hz -
(basic connection) 460 V at 60 Hz 460 V at 60 Hz - -

IE3: Motor series 11P (4 poles: IEC frame sizes 80 to 100; 6 poles: IEC frame sizes 90 to 112)
IE4: Motor series 11S (IEC frame sizes 63 to 100)

Rated voltage*

Possible connection Rated power P N Increased rated power 1,2 x P N Frequency inverter operation

230 V at 50 Hz -
Delta 400 V, 87 Hz
265 V at 60 Hz 265 V at 60 Hz

M
115 V at 50 Hz -
Delta - Delta 230 V, 100 Hz
132 V at 60 Hz 132 V at 60 Hz

Star 400 V at 50 Hz -
400 V, 100 Hz
(basic connection)) 460 V at 60 Hz 460 V at 60 Hz

200 V at 50 Hz -
Star - Star 460 V, 120 Hz
230 V at 60 Hz 230 V at 60 Hz

IE3: Motor series 11P and 22P (4 poles: IEC frame sizes 112 to 225; 6 poles: IEC frame size 132)
IE4: Motor series 11S and 22S (IEC frame sizes 112 to 280)

Rated voltage*

Possible connection Rated power P N Increased rated power 1,2 x P N Frequency inverter operation

Delta 400 V at 50 Hz -
(basic connection) 460 V at 60 Hz 460 V at 60 Hz
400 V, 100 Hz
200 V at 50 Hz -
Delta - Delta
230 V at 60 Hz 230 V at 60 Hz

690 V at 50 Hz
Star -
-
460 V, 120 Hz
346 V at 50 Hz -
Star - Star
400 V at 60 Hz 400 V at 60 Hz

* Tolerances of rated voltages in compliance with range A according to DIN EN 60034-1 (see page 570)

574 WG20 Gear Units and Geared Motors www.weg.net

 Terminal board connection

Motor series 11P/22P and 11S/22S Motor series 14P

W2 U2 V2 2TB1 W2 U2 V2 2TB1 2TB1 2TB1

W3 U3 V3 NCC W3 U3 V3 NCC W2 U2 V2 NCC W2 U2 V2 NCC

W4 U4 V4 2TB2 W4 U4 V4 2TB2 2TB2 2TB2

2TP1 2TP1 2TP1 2TP1
U1 V1 W1 U1 V1 W1
PTC PTC PTC PTC
L1 L2 L3 L1 L2 L3
U1 V1 W1 2TP2 U1 V1 W1 2TP2 2TP2 2TP2
L1 L2 L3 L1 L2 L3

2TB1 2TB1
W2 U2 V2 W2 U2 V2
NCC NCC

W4 U4 V4 2TB2 W4 U4 V4 2TB2
2TP1 2TP1
U3 V3 W3 PTC U3 V3 W3 PTC
U1 V1 W1 2TP2 U1 V1 W1 2TP2
L1 L2 L3 L1 L2 L3

Bimetal switch (2TB1/2TB2) only available for motor series 11

20. Variable speed drive application

The stator windings of the motors are wound with class F insulation (class H optional) and are suitable for either DOL
starting or - regarding the limits shown in the tabel below - via a variable speed drive.

Rated voltage

220-240/380-415 V (50 Hz)

400-460 V (60 Hz)

Voltage spikes dV/dt *

Motor rated voltage At motor terminals At motor terminals Rise time * Time between pulses
(phase-phase) (phase-phase) M
Vrated < 460 V ≤ 1600 V ≤ 5200 V/μs

460 V ≤ Vrated < 575 V ≤ 2000 V ≤ 6500 V/μs ≥ 0.1 μs ≥ 6 μs

575 V ≤ Vrated ≤ 1000 V ≤ 2400 V ≤ 7800 V/μs

* dV/dt and rise time definition according to NEMA MG1 - part 30

Notes:
▪ In order to protect the motor insulation system, the maximum recommended switching frequency is 5 kHz.
▪ If one or more of the above conditions is not attended, a filter (load reactor or dV/dt filter) must be installed in the
output of the VSD.
▪ General purpose motors with rated voltage greater than 575 V, which at the time of purchase did not have any
indication of operation with VSD, are able to withstand the electrical limits set in the table above for rated voltage up
to 575 V. If such conditions are not fully satisfied, output filters must be used.
▪ General purpose motors of the dual voltage type, for example 400/690 V or 380/660 V, which at the time of
purchase did not have any indication of operation with VSD, are able to be driven by a VSD in the higher voltage only
if the limits set in the table above for rated voltage up to 460 V are fully attended in the application. Otherwise, a load
reactor or a dV/dt filter must be installed in the VSD output.

www.weg.net WG20 Gear Units and Geared Motors 575

M

576 WG20 Gear Units and Geared Motors www.weg.net

Electrical basic data
Notes for electrical basic data
The technical data according to selection tables (starting current, torques, power factor, etc.) are valid for the rated values, that
means for the rated voltage and rated frequency.
If the motors are running on higher or lower voltage within the wide range voltage, the stator winding will be utilised according to
thermal class F. In these cases a power increase in accordance to a. and b. on page 571 is not possible.
The design of the wide range winding permits supply voltage deviations in the indicated wide range voltage of ± 5 % without
reduction of the power.

1 2 3 4 5 6 7 8 9 10 11 12
IA IE η η η MA MK
PN nN IN IN IN IN IN cosϕ MN Jmot m
IEC IN class 4/4 3/4 1/2 MN MN
Series

frame Type at at at at at at
size 115 V 200 V 230 V 400 V 690 V 400 V
[kW] [min-1] [A] [A] [A] [A] [A] [%] [%] [%] [Nm] [kgm2] [kg]

13 14 15
Frequency inverter operation Brake

at at
PN 400 V / 87 Hz 400 V / 100 Hz MB JB m
380 V 420 V
Type
IN MA MK IN MA MK PN nN IN PN nN IN x10 -3

[kW] [A] MN MN [A] MN MN [kW] [min-1] [A] [kW] [min-1] [A] [Nm] [kgm2] [kg]

1 PN = Rated power

2 nN = Rated speed

3 IN = Rated current M
4 IA/IN = Ratio of starting current to rated current

5 IE class = Efficiency class

6 η 4/4 (3/4, 1/2) = Efficiency at rated power, voltage and frequency

7 cosϕ = Power factor

8 MN = Rated torque

9 MA/MN = Ratio of starting torque to rated torque

10 MK/MN = Ratio of sweeping torque to rated torque

11 Jmot = Motor moment of inertia

12 m = Weight of the motor

13 MB = Braking torque

14 JB = Brake moment of inertia

15 m = Weight of the motor brake

www.weg.net WG20 Gear Units and Geared Motors 577

 4 Poles, 1500 min-1, 50 Hz - IE3
IE3
IA IE η η η MA MK
PN nN IN IN IN IN IN cosϕ MN Jmot m
IEC IN class 4/4 3/4 1/2 MN MN
Series

frame Type at at at at at at
size 115 V 200 V 230 V 400 V 690 V 400 V
[kW] [min-1] [A] [A] [A] [A] [A] [%] [%] [%] [Nm] [kgm2] [kg]

14P-63-04E 0.12 1405 - - 0.68 0.39 - 5.5 IE3 64.8 60.0 53.0 0.68 0.83 2.8 3.5 0.0004 5.8
63
14P-63-04F 0.18 1380 - - 0.90 0.52 - 4.3 IE3 69.9 67.0 65.0 0.72 1.25 2.2 2.2 0.0006 6.0
14P

14P-71-04E 0.25 1380 - - 1.19 0.68 - 4.8 IE3 73.5 72.0 69.0 0.72 1.76 2.3 2.3 0.0007 6.9
71
14P-71-04F 0.37 1395 - - 1.74 1.00 - 4.8 IE3 77.3 76.8 76.3 0.69 2.53 2.9 3.0 0.0008 7.8

80 14P-80-04E 0.55 1420 - - 2.14 1.23 - 6.6 IE3 80.8 79.0 77.0 0.80 3.70 2.8 3.0 0.0026 10.1

80 11P-80-04F 0.75 1430 5.70 3.28 2.85 1.64 - 7.0 IE3 82.5 82.0 80.0 0.80 5.01 3.2 3.4 0.0032 11.6

11P-90S/L-04E 1.1 1455 8.35 4.80 4.17 2.40 - 7.6 IE3 84.8 84.5 83.0 0.78 7.22 2.5 3.3 0.0055 15.8
90
11P-90S/L-04F 1.5 1455 11.2 6.42 5.58 3.21 - 7.4 IE3 85.5 85.0 84.0 0.79 9.88 2.6 3.4 0.0066 17.4

11P-100L-04E 2.2 1435 16.3 9.40 8.15 4.70 - 7.6 IE3 86.7 86.5 85.0 0.78 14.6 2.5 3.0 0.0090 27.0
100
11P

11P-L100L-04F 3.0 1440 21.9 12.6 11.0 6.31 - 7.8 IE3 88.0 88.0 87.0 0.78 19.9 3.5 3.7 0.0120 33.6

112 11P-112M-04E 4.0 1450 - 16.4 - 8.20 4.75 7.0 IE3 89.1 89.1 88.7 0.79 26.4 2.3 3.1 0.0182 34.5

11P-132S-04E 5.5 1465 - 20.6 - 10.3 5.97 8.5 IE3 90.7 90.7 90.0 0.85 35.9 2.4 3.4 0.0528 53.4

132 11P-L132M-04F 7.5 1465 - 28.4 - 14.2 8.22 8.5 IE3 90.6 90.0 87.5 0.84 48.9 2.5 3.4 0.0638 67.0

11P-L132M-04G 9.2 1460 - 34.7 - 17.4 10.1 8.5 IE3 91.0 91.0 90.1 0.84 60.2 2.5 3.3 0.0730 72.0

22P-160M-04E 11 1470 - 41.8 - 20.9 12.0 7.5 IE3 91.6 91.8 91.1 0.83 71.5 2.8 3.2 0.1191 134
160
22P-160L-04F 15 1465 - 55.8 - 27.9 16.2 7.2 IE3 92.3 92.5 92.2 0.84 97.8 2.8 3.1 0.1534 157

22P-180M-04E 18.5 1470 - 70.2 - 35.1 20.4 7.4 IE3 92.8 92.8 92.2 0.82 120 3.0 3.2 0.1740 171
180
22P-180L-04F 22 1470 - 82.1 - 41.0 23.8 7.3 IE3 93.2 93.0 92.3 0.83 143 3.4 3.4 0.2097 192
22P

22P-200L-04E 30 1480 - 114 - 57.1 33.1 7.5 IE3 93.7 93.6 92.9 0.81 194 2.8 3.1 0.3202 250
200
M 22P-200L-04F 37 1480 - 144 - 72.0 41.7 8.3 IE3 93.9 93.5 92.5 0.79 239 3.0 3.3 0.3869 277

22P-225S/M-04F 45 1480 - 162 - 80.9 46.9 7.5 IE3 94.4 94.1 93.7 0.85 291 2.8 3.1 0.6733 414
225
22P-225S/M-04G 55 1480 - 205 - 102 59.3 8.3 IE3 94.6 94.0 93.5 0.82 355 3.1 3.4 0.7347 462

Legend see page 577

578 WG20 Gear Units and Geared Motors www.weg.net

4 Poles, 1500 min-1, 50 Hz - IE3
IE3
Frequency inverter operation Brake

at at
PN 400 V / 87 Hz 400 V / 100 Hz MB JB m
380 V 420 V
Type
IN MA MK IN MA MK PN nN IN PN nN IN x10 -3

[kW] [A] MN MN [A] MN MN [kW] [min-1] [A] [kW] [min-1] [A] [Nm] [kgm2] [kg]

14P-63-04E 0.12 0.41 2.5 3.2 0.37 3.1 3.9 0.21 2445 0.72 - - -
2 0.015 1.1
4 0.015 1.0
14P-63-04F 0.18 0.54 2.0 2.0 0.49 2.4 2.4 0.31 2401 0.94 - - -

14P-71-04E 0.25 0.72 2.1 2.1 0.65 2.5 2.5 0.44 2401 1.25 - - -
4 0.015 1.0
2 0.015 1.1
14P-71-04F 0.37 1.05 2.6 2.7 0.95 3.2 3.3 0.64 2427 1.83 - - -

14P-80-04E 0.55 1.29 2.5 2.7 1.17 3.1 3.3 0.96 2471 2.25 - - -
8 0.061 1.6
4 0.015 1.0
11P-80-04F 0.75 1.73 2.9 3.1 1.56 3.5 3.7 1.3 2488 2.99 1.5 2860 3.44

11P-90S/L-04E 1.1 2.53 2.3 3.0 2.29 2.8 3.6 1.9 2532 4.38 2.2 2910 5.04
16 0.20 3.1
8 0.061 1.6
11P-90S/L-04F 1.5 3.38 2.3 3.1 3.06 2.9 3.7 2.6 2523 5.86 3 2900 6.74

11P-100L-04E 2.2 4.95 2.3 2.7 4.48 2.8 3.3 3.8 2497 8.56 4.4 2870 9.87
32 0.45 4.2
16 0.20 3.1
11P-L100L-04F 3.0 6.64 3.2 3.3 6.01 3.9 4.1 5.2 2506 11.6 6 2880 13.3
60 0.86 6.3
11P-112M-04E 4.0 8.63 2.1 2.8 7.81 2.5 3.4 - - - 8 2900 17.2
32 0.45 4.2
11P-132S-04E 5.5 10.8 2.2 3.1 9.81 2.6 3.7 - - - 11 2930 21.6
100 1.22 10.0
11P-L132M-04F 7.5 14.9 2.3 3.1 13.5 2.8 3.7 - - - 15 2930 29.8
60 0.86 6.3
11P-L132M-04G 9.2 18.3 2.3 3.0 16.6 2.8 3.6 - - - 18.4 2920 36.5

22P-160M-04E 11 22.0 2.5 2.9 19.9 3.1 3.5 - - - 22 2940 43.9

150 2.85 14.7
100 6.65 10.0
22P-160L-04F 15 29.4 2.5 2.8 26.6 3.1 3.4 - - - 30 2930 58.6

22P-180M-04E 18.5 36.9 2.7 2.9 33.4 3.3 3.5 - - - 37 2940 73.7
250 6.65 21.5
150 2.85 14.7
22P-180L-04F 22 43.2 3.1 3.1 39.0 3.7 3.7 - - - 44 2940 86.1

22P-200L-04E 30 60.1 2.5 2.8 54.4 3.1 3.4 - - - 60 2960 120

400 19.5 35
22P-200L-04F 37 75.8 2.7 3.0 68.6 3.3 3.6 - - - 74 2960 151
250 6.65 21.5
M
22P-225S/M-04F 45 85.2 2.5 2.8 77.0 3.1 3.4 - - - 90 2960 170
400 19.5 35
250 6.65 21.5
22P-225S/M-04G 55 107 2.8 3.1 97.1 3.4 3.7 - - - 110 2960 214

Legend see page 577

www.weg.net WG20 Gear Units and Geared Motors 579

 4 Poles, 1800 min-1, 60 Hz - IE3
IE3
IA IE η η η MA MK
PN nN IN IN IN IN IN cosϕ MN Jmot m
IEC IN class 4/4 3/4 1/2 MN MN
Series

frame Type at at at at at at
size 132 V 230 V 400 V 265 V 460 V 460 V
[kW] [min-1] [A] [A] [A] [A] [A] [%] [%] [%] [Nm] [kgm2] [kg]

14P-63-04E 0.12 1720 - - - 0.63 0.36 6.5 IE3 66.0 61.0 53.0 0.63 0.68 3.2 4.2 0.0004 5.8
63
14P-63-04F 0.18 1700 - - - 0.81 0.47 5.2 IE3 70.0 66.0 62.0 0.69 1.01 2.7 2.8 0.0006 6.0
14P

14P-71-04E 0.25 1700 - - - 1.07 0.62 5.3 IE3 74.0 72.0 70.0 0.69 1.43 2.6 2.8 0.0007 6.9
71
14P-71-04F 0.37 1710 - - - 1.53 0.88 5.6 IE3 78.5 78.0 77.5 0.67 2.07 3.5 3.7 0.0008 7.8

80 14P-80-04E 0.55 1720 - - - 1.89 1.09 7.3 IE3 81.5 80.0 77.0 0.78 3.06 3.4 3.8 0.0026 10.1

80 11P-80-04F 0.75 1740 5.16 2.96 1.71 2.57 1.48 8.3 IE3 83.5 80.0 78.5 0.76 4.12 3.8 4.3 0.0032 11.6

11P-90S/L-04E 1.1 1760 7.32 4.20 2.42 3.65 2.10 8.5 IE3 86.5 84.0 80.0 0.76 5.97 2.9 3.9 0.0055 15.8
90
11P-90S/L-04F 1.5 1755 9.86 5.66 3.27 4.91 2.83 8.3 IE3 86.5 85.5 82.5 0.77 8.17 3.0 3.8 0.0066 17.4

11P-100L-04E 2.2 1745 14.1 8.12 4.66 7.02 4.04 9.0 IE3 89.5 88.0 85.0 0.76 12.0 2.8 3.5 0.0090 27.0
100
11P

11P-L100L-04F 3.0 1740 19.0 10.9 6.30 9.48 5.46 8.6 IE3 89.5 86.5 84.0 0.77 16.5 4.6 4.8 0.0120 33.6

112 11P-112M-04E 4.0 1755 - 14.6 8.41 - 7.28 8.0 IE3 89.5 89.5 87.5 0.77 21.8 2.5 3.5 0.0182 34.5

11P-132S-04E 5.5 1765 - 18.1 10.5 - 9.07 8.9 IE3 91.7 91.0 88.5 0.83 29.8 2.6 4.3 0.0528 53.4

132 11P-L132M-04F 7.5 1770 - 24.8 14.3 - 12.4 9.0 IE3 91.7 91.5 91.0 0.83 40.5 2.7 4.3 0.0638 67.0

11P-L132M-04G 9.2 1765 - 30.7 17.8 - 15.4 9.0 IE3 91.7 91.5 90.4 0.82 49.8 2.6 3.8 0.0730 72.0

22P-160M-04E 11 1775 - 36.9 21.2 - 18.4 8.2 IE3 92.4 92.2 91.0 0.81 59.2 3.0 3.7 0.1191 134
160
22P-160L-04F 15 1775 - 49.4 28.4 - 24.7 7.6 IE3 93.0 92.9 92.0 0.82 80.7 2.9 3.5 0.1534 157

22P-180M-04E 18.5 1775 - 61.3 35.2 - 30.6 7.7 IE3 93.6 93.0 92.0 0.81 99.6 3.4 3.6 0.1740 171
180
22P-180L-04F 22 1775 - 72.0 41.4 - 36.0 8.5 IE3 93.6 93.2 92.1 0.82 118 3.5 3.8 0.2097 192
22P

22P-200L-04E 30 1780 - 100 57.5 - 50.0 8.3 IE3 94.1 93.7 92.6 0.80 161 2.9 3.5 0.3202 250
200
M 22P-200L-04F 37 1782 - 124 71.5 - 62.2 9.3 IE3 94.5 94.0 93.0 0.79 198 3.5 3.6 0.3869 277

22P-225S/M-04F 45 1782 - 142 81.4 - 70.8 8.6 IE3 95.0 94.5 93.0 0.84 241 3.2 3.5 0.6733 414
225
22P-225S/M-04G 55 1785 - 179 103 - 89.3 9.6 IE3 95.4 94.5 93.8 0.81 294 3.7 4.2 0.7347 462

Legend see page 577

580 WG20 Gear Units and Geared Motors www.weg.net

4 Poles, 1800 min-1, 60 Hz - IE3
IE3
Frequency inverter operation Brake

at at at at
PN 460 V / 105 Hz 460 V / 120 Hz MB JB m
380 V 420 V 440 V 480 V
Type
IN MA MK IN MA MK IN MA MK IN MA MK PN nN IN PN nN IN x10 -3

[kW] [A] MN MN [A] MN MN [A] MN MN [A] MN MN [kW] [min-1] [A] [kW] [min-1] [A] [Nm] [kgm2] [kg]

14P-63-04E 0.12 0.44 2.2 2.9 0.40 2.7 3.5 0.38 2.9 3.8 0.35 3.5 4.6 0.21 3010 0.66 - - -
2 0.015 1.1
4 0.015 1.0
14P-63-04F 0.18 0.57 1.8 1.9 0.51 2.3 2.3 0.49 2.5 2.6 0.45 2.9 3.0 0.32 2975 0.85 - - -

14P-71-04E 0.25 0.74 1.8 1.9 0.67 2.2 2.3 0.64 2.4 2.6 0.59 2.8 3.0 0.44 2975 1.12 - - -
4 0.015 1.0
2 0.015 1.1
14P-71-04F 0.37 1.07 2.4 2.5 0.97 2.9 3.1 0.92 3.2 3.4 0.85 3.8 4.0 0.65 2993 1.61 - - -

14P-80-04E 0.55 1.32 2.3 2.6 1.19 2.8 3.2 1.14 3.1 3.5 1.04 3.7 4.1 0.96 3010 1.98 - - -
8 0.061 1.6
4 0.015 1.0
11P-80-04F 0.75 1.79 2.6 2.9 1.62 3.2 3.6 1.55 3.5 3.9 1.42 4.1 4.7 1.3 3045 2.70 1.5 3480 3.11

11P-90S/L-04E 1.1 2.54 2.0 2.7 2.30 2.4 3.3 2.20 2.7 3.6 2.01 3.2 4.2 1.9 3080 3.83 2.2 3520 4.41
16 0.20 3.1
8 0.061 1.6
11P-90S/L-04F 1.5 3.43 2.0 2.6 3.10 2.5 3.2 2.96 2.7 3.5 2.71 3.3 4.1 2.6 3071 5.16 3 3510 5.94

11P-100L-04E 2.2 4.89 1.9 2.4 4.42 2.3 2.9 4.22 2.6 3.2 3.87 3.0 3.8 3.9 3054 7.37 4.4 3490 8.48
32 0.45 4.2
16 0.20 3.1
11P-L100L-04F 3.0 6.61 3.1 3.3 5.98 3.8 4.0 5.71 4.2 4.4 5.23 5.0 5.2 5.3 3045 9.95 6 3480 11.5
60 0.86 6.3
11P-112M-04E 4.0 8.81 2.3 3.2 7.97 2.8 3.9 7.61 2.3 3.2 6.98 2.7 3.8 - - - 8 3510 15.3
32 0.45 4.2
11P-132S-04E 5.5 10.9 2.3 3.9 9.90 2.9 4.7 9.48 2.4 3.9 8.69 2.8 4.7 - - - 11 3530 19.0
100 1.22 10.0
11P-L132M-04F 7.5 15.1 2.4 3.9 13.6 3.0 4.7 13.0 2.5 3.9 11.9 2.9 4.7 - - - 15 3540 26.0
60 0.86 6.3
11P-L132M-04G 9.2 18.6 2.3 3.4 16.9 2.9 4.2 16.1 2.4 3.5 14.8 2.8 4.1 - - - 18.4 3530 32.3

22P-160M-04E 11 22.3 2.7 3.3 20.2 3.3 4.1 19.2 2.7 3.4 17.6 3.3 4.0 - - - 22 3550 38.6
150 2.85 14.7
100 6.65 10.0
22P-160L-04F 15 29.9 2.6 3.2 27.0 3.2 3.9 25.8 2.7 3.2 23.7 3.2 3.8 - - - 30 3550 51.9

22P-180M-04E 18.5 37.1 3.1 3.2 33.5 3.7 4.0 32.0 3.1 3.3 29.3 3.7 3.9 - - - 37 3550 64.3
250 6.65 21.5
150 2.85 14.7
22P-180L-04F 22 43.6 3.2 3.4 39.4 3.9 4.2 37.6 3.2 3.5 34.5 3.8 4.1 - - - 44 3550 75.6

22P-200L-04E 30 60.5 2.6 3.2 54.8 3.2 3.9 52.3 2.7 3.2 47.9 3.2 3.8 - - - 60 3560 105
400 19.5 35
22P-200L-04F 37 75.3 3.2 3.2 68.1 3.9 4.0 65.0 3.2 3.3 59.6 3.8 3.9 - - - 74 3564 131
250 6.65 21.5
M
22P-225S/M-04F 45 85.7 2.9 3.2 77.5 3.5 3.9 74.0 2.9 3.2 67.9 3.5 3.8 - - - 90 3564 149
400 19.5 35
250 6.65 21.5
22P-225S/M-04G 55 108 3.3 3.8 98.1 4.1 4.6 93.4 3.4 3.8 85.6 4.0 4.6 - - - 110 3570 188

Legend see page 577

www.weg.net WG20 Gear Units and Geared Motors 581

 6 Poles, 1000 min-1, 50 Hz - IE3
IE3
IA IE η η η MA MK
PN nN IN IN IN IN IN cosϕ MN Jmot m
IEC IN class 4/4 3/4 1/2 MN MN
Series

frame Type at at at at at at
size 115 V 200 V 230 V 400 V 690 V 400 V
[kW] [min-1] [A] [A] [A] [A] [A] [%] [%] [%] [Nm] [kgm2] [kg]

63 14P-63-06F 0.12 925 - - 0.89 0.51 - 3.1 IE3 57.7 55.0 50.0 0.59 1.24 2.1 2.3 0.00070 6.2

71 14P-71-06E 0.18 900 - - 1.24 0.71 - 3.2 IE3 63.9 62.0 56.0 0.57 1.91 2.0 2.1 0.00090 8.5
14P

14P-80-06D 0.25 955 - - 1.29 0.74 - 4.3 IE3 68.8 68.5 63.6 0.71 2.50 1.7 2.4 0.00290 9.2

80 14P-80-06E 0.37 925 - - 1.69 0.97 - 4.5 IE3 73.5 69.5 66.0 0.75 3.82 1.9 2.1 0.00250 11.0

14P-L80-06F 0.55 945 - - 2.59 1.49 - 5.1 IE3 77.2 75.2 70.5 0.69 5.56 2.9 3.1 0.00340 12.4

90 11P-90S/L-06E 0.75 940 6.71 3.86 3.35 1.93 - 5.2 IE3 79.0 79.0 76.5 0.71 7.62 2.5 2.8 0.00660 17.8

100 11P-100L-06D 1.1 960 9.74 5.60 4.87 2.80 - 6.0 IE3 81.0 80.0 77.0 0.70 10.9 2.1 3.2 0.01100 21.6

112 11P-112M-06D 1.5 960 12.4 7.14 6.21 3.57 - 6.0 IE3 85.5 85.5 84.5 0.71 14.9 2.1 2.8 0.02020 34.4
11P

11P-132S-06D 2.2 975 - 10.9 - 5.46 3.17 6.5 IE3 84.3 84.3 84.0 0.69 21.6 2.2 2.6 0.04910 55.0

11P-132S-06E 3.0 970 - 13.8 - 6.91 4.01 6.0 IE3 85.8 85.8 85.0 0.73 29.6 1.9 2.5 0.05660 55.0
132
11P-132M-06F 4.0 960 - 18.0 - 8.99 5.21 6.5 IE3 86.8 86.8 86.0 0.74 39.8 2.2 2.5 0.05660 56.0

11P-L132M-06G 5.5 971 - 25.4 - 12.7 7.37 7.3 IE3 88.0 88.4 87.6 0.71 54.1 2.8 3.0 0.07950 71.8

Legend see page 577

582 WG20 Gear Units and Geared Motors www.weg.net

6 Poles, 1000 min-1, 50 Hz - IE3
IE3
Frequency inverter operation Brake

at at
PN 400 V / 87 Hz 400 V / 100 Hz MB JB m
380 V 420 V
Type
IN MA MK IN MA MK PN nN IN PN nN IN x10 -3

[kW] [A] MN MN [A] MN MN [kW] [min-1] [A] [kW] [min-1] [A] [Nm] [kgm2] [kg]
2 0.015 1.1
14P-63-06F 0.12 0.54 1.9 2.1 0.48 2.3 2.5 0.21 1609.5 0.93 - - -
4 0.015 1.0
14P-71-06E 0.18 0.75 1.8 1.9 0.68 2.2 2.3 0.31 1566 1.30 - - -
4 0.015 1.0
2 0.015 1.1
14P-80-06D 0.25 0.78 1.5 2.2 0.70 1.9 2.6 0.44 1661.7 1.35 - - -

14P-80-06E 0.37 1.02 1.7 1.9 0.92 2.1 2.3 0.64 1609.5 1.77 - - -
8 0.061 1.6
4 0.015 1.0
14P-L80-06F 0.55 1.57 2.6 2.8 1.42 3.2 3.4 0.96 1644.3 2.72 - - -
16 0.20 3.1
11P-90S/L-06E 0.75 2.03 2.3 2.5 1.84 2.8 3.1 1.3 1635.6 3.52 1.5 1880 4.05
8 0.061 1.6
32 0.45 4.2
11P-100L-06D 1.1 2.95 1.9 2.9 2.67 2.3 3.5 1.9 1670.4 5.11 2.2 1920 5.88
16 0.20 3.1
60 0.86 6.3
11P-112M-06D 1.5 3.76 1.9 2.5 3.40 2.3 3.1 2.6 1670 6.52 3.0 1920 7.50
32 0.45 4.2
11P-132S-06D 2.2 5.75 2.0 2.3 5.20 2.4 2.9 - - - 4.0 1950 11.5

11P-132S-06E 3.0 7.27 1.7 2.3 6.58 2.1 2.8 - - - 6 1940 14.5
100 1.22 10.0
60 0.86 6.3
11P-132M-06F 4.0 9.46 2.0 2.3 8.56 2.4 2.8 - - - 8 1920 18.9

11P-L132M-06G 5.5 13.4 2.5 2.7 12.10 3.1 3.3 - - - 11 1942 26.7

Legend see page 577

www.weg.net WG20 Gear Units and Geared Motors 583

 6 Poles, 1200 min-1, 60 Hz - IE3
IE3
IA IE η η η MA MK
PN nN IN IN IN IN IN cosϕ MN Jmot m
IEC IN class 4/4 3/4 1/2 MN MN
Series

frame Type at at at at at at
size 132 V 230 V 400 V 265 V 460 V 460 V
[kW] [min-1] [A] [A] [A] [A] [A] [%] [%] [%] [Nm] [kgm2] [kg]

63 14P-63-06F 0.12 1140 - - - 0.78 0.45 3.5 IE3 64.0 59.0 52.0 0.52 1.01 2.5 2.8 0.00070 6.2

71 14P-71-06E 0.18 1110 - - - 1.09 0.63 3.7 IE3 68.0 59.5 57.5 0.53 1.55 2.3 2.7 0.00090 8.5
14P

14P-80-06D 0.25 1165 - - - 1.16 0.67 5.1 IE3 72.0 70.5 64.1 0.65 2.05 2.1 3.1 0.00290 9.2

80 14P-80-06E 0.37 1140 - - - 1.53 0.88 4.9 IE3 75.3 70.0 66.0 0.70 3.10 2.4 2.8 0.00250 11.0

14P-L80-06F 0.55 1155 - - - 2.34 1.35 6.1 IE3 80.0 77.0 71.9 0.64 4.55 3.5 3.9 0.00340 12.4

90 11P-90S/L-06E 0.75 1145 5.82 3.34 - 2.90 1.66 6.2 IE3 82.5 80.0 77.0 0.69 6.26 2.9 3.4 0.00660 17.8

100 11P-100L-06D 1.1 1165 8.22 4.72 - 4.10 2.36 7.9 IE3 87.5 81.0 76.0 0.67 9.02 2.4 3.8 0.01100 21.6

112 11P-112M-06D 1.5 1165 10.7 6.16 - 5.35 3.08 6.8 IE3 88.5 86.5 82.5 0.69 12.3 2.3 3.1 0.02020 34.4
11P

11P-132S-06D 2.2 1175 - 8.94 5.14 - 4.47 7.5 IE3 89.5 88.7 78.0 0.69 17.9 2.3 3.0 0.04910 55.0

11P-132S-06E 3.0 1165 - 12.0 6.91 - 6.00 6.3 IE3 89.5 88.5 85.5 0.70 24.6 1.8 2.9 0.05660 55.0
132
11P-132M-06F 4.0 1165 - 15.8 9.09 - 7.90 6.6 IE3 89.5 88.5 85.5 0.71 32.8 1.9 3.0 0.05660 56.0

11P-L132M-06G 5.5 1175 - 22.0 12.6 - 11.0 8.1 IE3 91.0 89.7 88.5 0.69 44.7 3.1 3.6 0.07950 71.8

Legend see page 577

584 WG20 Gear Units and Geared Motors www.weg.net

6 Poles, 1200 min-1, 60 Hz - IE3
IE3
Frequency inverter operation Brake

at at at at
PN 460 V / 105 Hz 460 V / 120 Hz MB JB m
380 V 420 V 440 V 480 V
Type
IN MA MK IN MA MK IN MA MK IN MA MK PN nN IN PN nN IN x10 -3

[kW] [A] MN MN [A] MN MN [A] MN MN [A] MN MN [kW] [min-1] [A] [kW] [min-1] [A] [Nm] [kgm2] [kg]
2 0.015 1.1
14P-63-06F 0.12 0.55 1.7 1.9 0.50 2.1 2.3 0.47 2.3 2.6 0.43 2.7 3.0 0.21 1995 0.82 - - -
4 0.015 1.0
14P-71-06E 0.18 0.76 1.6 1.8 0.69 1.9 2.3 0.66 2.1 2.5 0.60 2.5 2.9 0.32 1943 1.14 - - -
4 0.015 1.0
2 0.015 1.1
14P-80-06D 0.25 0.81 1.4 2.1 0.73 1.8 2.6 0.70 1.9 2.8 0.64 2.3 3.4 0.44 2039 1.22 - - -

14P-80-06E 0.37 1.07 1.6 1.9 0.96 2.0 2.3 0.92 2.2 2.6 0.84 2.6 3.0 0.65 1995 1.60 - - -
8 0.061 1.6
4 0.015 1.0
14P-L80-06F 0.55 1.63 2.4 2.7 1.48 2.9 3.3 1.41 3.2 3.6 1.29 3.8 4.2 0.96 2021 2.46 - - -
16 0.20 3.1
11P-90S/L-06E 0.75 2.01 2.0 2.3 1.82 2.4 2.8 1.74 2.7 3.1 1.59 3.2 3.7 1.31 2004 3.05 1.5 2290 3.49
8 0.061 1.6
32 0.45 4.2
11P-100L-06D 1.1 2.86 1.6 2.6 2.58 2.0 3.2 2.47 2.2 3.5 2.26 2.6 4.1 1.93 2039 4.31 2.2 2330 4.96
16 0.20 3.1
60 0.86 6.3
11P-112M-06D 1.5 3.73 1.6 2.1 3.37 1.9 2.6 3.22 2.1 2.8 2.95 2.5 3.4 2.63 2039 5.62 3 2330 6.47
32 0.45 4.2
11P-132S-06D 2.2 5.41 2.1 2.7 4.90 2.5 3.3 4.67 2.1 2.7 4.28 2.5 3.3 - - - 4.4 2350 9.39

11P-132S-06E 3.0 7.27 1.6 2.6 6.58 2.0 3.2 6.27 1.6 2.7 5.75 2.0 3.2 - - - 6 2330 12.6
100 1.22 10.0
60 0.86 6.3
11P-132M-06F 4.0 9.57 1.7 2.7 8.66 2.1 3.3 8.26 1.7 2.7 7.57 2.1 3.3 - - - 8 2330 16.6

11P-L132M-06G 5.5 13.3 2.8 3.2 12.0 3.4 4.0 11.5 2.8 3.3 10.5 3.4 3.9 - - - 11 2350 23.1

Legend see page 577

www.weg.net WG20 Gear Units and Geared Motors 585

 4 Poles, 1500 min-1, 50 Hz - IE4
IE4
IA IE η η η MA MK
PN nN IN IN IN IN IN cosϕ MN Jmot m
IEC IN class 4/4 3/4 1/2 MN MN
Series

frame Type at at at at at at
size 115 V 200 V 230 V 400 V 690 V 400 V
[kW] [min-1] [A] [A] [A] [A] [A] [%] [%] [%] [Nm] [kgm2] [kg]

11S-63-04E 0.12 1400 1.18 0.68 0.59 0.34 - 3.7 IE4 69.8 63.9 58.7 0.73 0.82 2.2 2.3 0.0006 6
63
11S-63-04F 0.18 1405 1.66 0.95 0.83 0.48 - 3.9 IE4 74.7 68.8 64.7 0.73 1.22 2.5 2.4 0.0007 7

71 11S-71-04E 0.25 1405 2.37 1.36 1.18 0.68 - 4.7 IE4 77.9 74.2 70.3 0.68 1.70 2.9 2.9 0.0009 10

11S-80-04E 0.37 1445 2.86 1.65 1.43 0.82 - 7.2 IE4 81.1 77.8 74.3 0.80 2.45 3.3 3.5 0.0031 13
80
11S-L80-04F 0.55 1439 4.06 2.34 2.03 1.17 - 6.8 IE4 83.9 83.4 82.0 0.81 3.65 2.6 2.9 0.0037 15

11S-90S/L-04E 0.75 1455 5.63 3.24 2.82 1.62 - 7.0 IE4 85.7 85.1 83.2 0.78 4.92 2.6 3.1 0.0055 18
11S

90
11S-L90S/L-04F 1.1 1461 8.44 4.86 4.22 2.43 - 8.3 IE4 87.2 86.2 84.0 0.75 7.19 3.4 3.9 0.0076 19

100 11S-100L-04E 1.5 1455 11.4 6.55 5.69 3.27 - 9.0 IE4 88.2 87.7 85.9 0.75 9.85 4.4 4.0 0.0097 28

11S-L112M-04E 2.2 1469 - 10.1 - 5.07 2.94 8.6 IE4 89.5 89.6 87.8 0.70 14.3 3.4 4.3 0.0206 45
112
11S-L112M-04F 3.0 1460 - 12.9 - 6.47 3.75 7.8 IE4 90.4 89.4 88.1 0.74 19.6 2.9 3.6 0.0206 45

11S-132S-04E 4.0 1475 - 15.3 - 7.64 4.43 9.2 IE4 91.1 90.1 88.5 0.83 25.9 2.6 3.8 0.0638 60
132
11S-L132M-04F 5.5 1470 - 20.6 - 10.3 5.96 9.2 IE4 91.9 91.2 90.3 0.84 35.7 2.6 3.7 0.0751 66

132 22S-132M/L-04G 7.5 1471 - 27.8 - 13.9 8.07 10.0 IE4 92.6 91.5 90.3 0.84 48.7 3.2 4.0 0.0788 84

22S-160M-04E 9.2 1480 - 35.3 - 17.6 10.2 8.6 IE4 93.0 92.9 91.9 0.81 59.4 3.0 3.3 0.1398 135
160
22S-160M-04F 11 1480 - 42.0 - 21.0 12.2 8.2 IE4 93.3 93.0 92.0 0.81 71.0 3.0 3.5 0.1537 143

22S-180M-04E 15 1480 - 57.6 - 28.8 16.7 7.5 IE4 93.9 93.5 92.5 0.80 96.8 3.3 3.8 0.1906 190
180
22S-180L-04F 18.5 1480 - 68.3 - 34.2 19.8 8.2 IE4 94.2 94.2 93.6 0.83 119 3.0 3.4 0.2291 204

22S-200L-04E 22 1485 - 87.3 - 43.6 25.3 8.4 IE4 94.5 94.0 93.0 0.77 142 3.4 3.7 0.3183 230
200
22S

22S-200L-04F 30 1485 - 114 - 57.0 33.1 8.6 IE4 94.9 94.7 93.9 0.80 193 3.2 3.3 0.3979 281

M 225
22S-225S/M-04E 37 1484 - 135 - 67.6 39.2 8.6 IE4 95.2 95.1 94.6 0.83 238 3.1 3.5 0.7346 436

22S-225S/M-04F 45 1485 - 168 - 84.1 48.7 9.0 IE4 95.4 95.0 94.2 0.81 289 3.5 3.9 0.7346 440

250 22S-250S/M-04E 55 1487 - 200 - 100 57.9 9.0 IE4 95.7 95.4 94.9 0.83 353 3.5 3.7 1.2100 550

22S-280S/M-04E 75 1490 - 275 - 138 79.7 8.5 IE4 96.0 96.0 95.5 0.82 481 2.8 3.0 2.7800 830

280 22S-280S/M-04F 90 1488 - 322 - 161 93.3 7.9 IE4 96.1 96.0 95.7 0.84 578 2.5 2.8 3.4000 895

22S-280S/M-04G 110 1489 - 393 - 196 114 8.6 IE4 96.3 96.0 95.8 0.84 706 2.9 3.0 3.4000 895

586 WG20 Gear Units and Geared Motors www.weg.net

4 Poles, 1500 min-1, 50 Hz - IE4
IE4
Frequency inverter operation Brake

at at
PN 400 V / 87 Hz 400 V / 100 Hz MB JB m
380 V 420 V
Type
IN MA MK IN MA MK PN nN IN PN nN IN x10 -3

[kW] [A] MN MN [A] MN MN [kW] [min-1] [A] [kW] [min-1] [A] [Nm] [kgm2] [kg]

11S-63-04E 0.12 0.36 2.0 2.1 0.32 2.4 2.5 0.21 2436 0.62 0.24 2800 0.71
2 0.015 1.1
4 0.015 1.0
11S-63-04F 0.18 0.50 2.3 2.2 0.45 2.8 2.6 0.31 2445 0.87 0.36 2810 1.00
4 0.015 1.0
11S-71-04E 0.25 0.72 2.6 2.6 0.65 3.2 3.2 0.44 2445 1.24 0.50 2810 1.43
2 0.015 1.1
11S-80-04E 0.37 0.87 3.0 3.2 0.78 3.6 3.9 0.64 2514 1.50 0.74 2890 1.73
8 0.061 1.6
4 0.015 1.0
11S-L80-04F 0.55 1.23 2.3 2.6 1.11 2.9 3.2 0.96 2504 2.13 1.1 2878 2.46

11S-90S/L-04E 0.75 1.71 2.3 2.8 1.54 2.9 3.4 1.3 2532 2.96 1.5 2910 3.40
16 0.20 3.1
8 0.061 1.6
11S-L90S/L-04F 1.1 2.56 3.1 3.5 2.31 3.7 4.3 1.9 2542 4.43 2.2 2922 5.10
32 0.45 4.2
11S-100L-04E 1.5 3.44 4.0 3.6 3.11 4.9 4.4 2.6 2532 5.97 3 2910 6.87
16 0.20 3.1
11S-L112M-04E 2.2 5.34 3.1 3.9 4.83 3.7 4.7 - - - 4.4 2938 10.6
60 0.86 6.3
32 0.45 4.2
11S-L112M-04F 3.0 6.81 2.6 3.2 6.16 3.2 4.0 - - - 6 2920 13.6

11S-132S-04E 4.0 8.04 2.3 3.4 7.28 2.9 4.2 - - - 8 2950 16.0
100 1.22 10.0
11S-L132M-04F 5.5 10.8 2.3 3.3 9.81 2.9 4.1 - - - 11 2940 21.6
60 0.86 6.3
22S-132M/L-04G 7.5 14.6 2.9 3.6 13.2 3.5 4.4 - - - 15 2942 29.2

22S-160M-04E 9.2 18.5 2.7 3.0 16.8 3.3 3.6 - - - 18.4 2960 37.0
150 2.85 14.7
100 6.65 10.0
22S-160M-04F 11 22.1 2.7 3.2 20.0 3.3 3.9 - - - 22 2960 44.1

22S-180M-04E 15 30.3 3.0 3.4 27.4 3.6 4.2 - - - 30 2960 60.5

250 6.65 21.5
150 2.85 14.7
22S-180L-04F 18.5 36.0 2.7 3.1 32.6 3.3 3.7 - - - 37 2960 71.8

22S-200L-04E 22 45.9 3.1 3.3 41.5 3.7 4.1 - - - 44 2970 91.6

400 19.5 35
250 6.65 21.5
22S-200L-04F 30 60.0 2.9 3.0 54.3 3.5 3.6 - - - 60 2970 120

22S-225S/M-04E 37 71.2 2.8 3.2 64.4 3.4 3.9 - - - 74 2968 142

400 19.5 35 M
250 6.65 21.5
22S-225S/M-04F 45 88.5 3.2 3.5 80.1 3.9 4.3 - - - 90 2970 177
1000 45 73
22S-250S/M-04E 55 105 3.2 3.3 95.2 3.9 4.1 - - - 110 2974 210
400 19.5 35
22S-280S/M-04E 75 145 2.5 2.7 131 3.1 3.3 - - - 150 2980 290
1000 45 73
22S-280S/M-04F 90 169 2.3 2.5 153 2.8 3.1 - - - 180 2976 338
400 19.5 35
22S-280S/M-04G 110 206 2.6 2.7 187 3.2 3.3 - - - 220 2978 413

www.weg.net WG20 Gear Units and Geared Motors 587

 4 Poles, 1800 min-1, 60 Hz - IE4
IE4
IA IE η η η MA MK
PN nN IN IN IN IN IN cosϕ MN Jmot m
IEC IN class 4/4 3/4 1/2 MN MN
Series

frame Type at at at at at at
size 132 V 230 V 400 V 265 V 460 V 460 V
[kW] [min-1] [A] [A] [A] [A] [A] [%] [%] [%] [Nm] [kgm2] [kg]

11S-63-04E 0.12 1704 1.12 0.64 - 0.56 0.32 3.9 IE4 70.0 65.2 59.0 0.67 0.67 2.6 2.8 0.0006 6
63
11S-63-04F 0.18 1707 1.59 0.91 - 0.79 0.46 4.3 IE4 74.0 72.2 67.7 0.67 1.01 2.9 3.0 0.0007 7

71 11S-71-04E 0.25 1712 2.18 1.25 - 1.09 0.63 5.1 IE4 77.0 72.4 67.0 0.65 1.39 3.3 3.4 0.0009 10

11S-80-04E 0.37 1746 2.61 1.50 - 1.30 0.75 8.8 IE4 81.5 77.5 73.0 0.76 2.02 4.0 4.1 0.0031 13
80
11S-L80-04F 0.55 1745 3.67 2.11 - 1.83 1.05 8.1 IE4 84.0 82.9 80.1 0.78 3.01 3.1 3.5 0.0037 15

11S-90S/L-04E 0.75 1760 5.12 2.94 - 2.55 1.47 8.2 IE4 85.5 84.8 81.8 0.75 4.07 3.0 3.8 0.0055 18
11S

90
11S-L90S/L-04F 1.1 1765 7.64 4.38 - 3.80 2.19 9.6 IE4 87.5 86.0 82.9 0.72 5.95 3.9 4.7 0.0076 19

100 11S-100L-04E 1.5 1760 10.3 5.91 - 5.13 2.95 10.4 IE4 88.5 87.2 84.4 0.72 8.14 5.0 4.8 0.0097 28

11S-L112M-04E 2.2 1772 - 9.19 5.29 - 4.60 9.3 IE4 91.0 88.9 86.0 0.66 11.9 3.7 5.0 0.0206 45
112
11S-L112M-04F 3.0 1766 - 11.7 6.70 - 5.83 8.5 IE4 91.0 89.0 86.6 0.71 16.2 3.1 4.2 0.0206 45

11S-132S-04E 4.0 1755 - 13.6 7.83 - 6.81 10.3 IE4 91.0 89.2 86.7 0.81 21.5 2.8 4.4 0.0638 60
132
11S-L132M-04F 5.5 1774 - 18.2 10.5 - 9.11 10.4 IE4 92.4 91.2 89.6 0.82 29.6 2.8 4.3 0.0751 66

132 22S-132M/L-04G 7.5 1775 - 25.2 14.5 - 12.6 11.0 IE4 92.4 92.4 91.2 0.81 40.4 3.5 4.6 0.0788 84

22S-160M-04E 9.2 1780 - 31.4 18.1 - 15.7 9.0 IE4 93.0 92.4 91.7 0.79 49.4 3.3 4.0 0.1398 135
160
22S-160M-04F 11 1785 - 37.8 21.7 - 18.9 9.0 IE4 93.6 93.0 91.7 0.78 58.9 3.3 4.0 0.1537 143

22S-180M-04E 15 1782 - 51.3 29.5 - 25.7 8.8 IE4 94.1 93.7 92.2 0.78 80.4 3.8 4.3 0.1906 190
180
22S-180L-04F 18.5 1780 - 60.7 34.9 - 30.3 9.2 IE4 94.5 94.1 93.0 0.81 99.3 2.8 3.8 0.2291 204

22S-200L-04E 22 1787 - 77.9 44.8 - 39.0 9.5 IE4 94.5 94.0 92.5 0.75 118 3.4 4.1 0.3183 230
200
22S

22S-200L-04F 30 1785 - 102 58.4 - 50.8 9.5 IE4 95.0 94.5 93.0 0.78 161 3.7 3.8 0.3979 281

M 225
22S-225S/M-04E 37 1786 - 119 68.3 - 59.4 9.6 IE4 95.4 94.5 93.0 0.82 198 3.5 4.0 0.7346 436

22S-225S/M-04F 45 1785 - 148 85.1 - 74.0 10.0 IE4 95.4 95.0 93.6 0.80 241 3.7 4.2 0.7346 440

250 22S-250S/M-04E 55 1788 - 178 102 - 89.0 10.0 IE4 95.8 95.4 94.1 0.81 294 4.0 4.2 1.2100 550

22S-280S/M-04E 75 1791 - 242 139 - 121 9.5 IE4 96.2 95.4 94.5 0.81 400 3.1 3.4 2.7800 830

280 22S-280S/M-04F 90 1790 - 283 163 - 141 8.9 IE4 96.2 95.8 95.0 0.83 480 2.9 3.1 3.4000 895

22S-280S/M-04G 110 1790 - 346 199 - 173 9.5 IE4 96.2 96.1 95.8 0.83 587 3.3 3.3 3.4000 895

588 WG20 Gear Units and Geared Motors www.weg.net

4 Poles, 1800 min-1, 60 Hz - IE4
IE4
Frequency inverter operation Brake

at at at at
PN 460 V / 105 Hz 460 V / 120 Hz MB JB m
380 V 420 V 440 V 480 V
Type
IN MA MK IN MA MK IN MA MK IN MA MK PN nN IN PN nN IN x10 -3

[kW] [A] MN MN [A] MN MN [A] MN MN [A] MN MN [kW] [min-1] [A] [kW] [min-1] [A] [Nm] [kgm2] [kg]

11S-63-04E 0.12 0.39 1.8 1.9 0.35 2.2 2.3 0.34 2.4 2.6 0.31 2.8 3.0 0.21 2982 0.58 0.24 3408 0.67
2 0.015 1.1
4 0.015 1.0
11S-63-04F 0.18 0.55 2.0 2.0 0.50 2.4 2.5 0.48 2.7 2.7 0.44 3.2 3.3 0.32 2987 0.83 0.36 3414 0.96
4 0.015 1.0
11S-71-04E 0.25 0.76 2.3 2.3 0.69 2.8 2.8 0.66 3.0 3.1 0.60 3.6 3.7 0.44 2996 1.14 0.50 3424 1.32
2 0.015 1.1
11S-80-04E 0.37 0.91 2.7 2.8 0.82 3.3 3.4 0.78 3.7 3.8 0.72 4.4 4.5 0.65 3056 1.37 0.74 3492 1.58
8 0.061 1.6
4 0.015 1.0
11S-L80-04F 0.55 1.27 2.1 2.4 1.15 2.6 2.9 1.10 2.8 3.2 1.01 3.4 3.8 0.96 3054 1.92 1.1 3490 2.21

11S-90S/L-04E 0.75 1.78 2.0 2.6 1.61 2.5 3.2 1.54 2.7 3.5 1.41 3.3 4.1 1.3 3080 2.68 1.5 3520 3.09
16 0.20 3.1
8 0.061 1.6
11S-L90S/L-04F 1.1 2.65 2.7 3.2 2.40 3.3 3.9 2.29 3.6 4.3 2.10 4.2 5.1 1.9 3089 3.99 2.2 3530 4.60
32 0.45 4.2
11S-100L-04E 1.5 3.57 3.4 3.3 3.23 4.2 4.0 3.08 4.6 4.4 2.83 5.4 5.2 2.6 3080 5.39 3 3520 6.20
16 0.20 3.1
11S-L112M-04E 2.2 5.57 2.5 3.4 5.04 3.1 4.2 4.81 3.4 4.6 4.41 4.0 5.4 - - - 4.4 3544 9.66
60 0.86 6.3
32 0.45 4.2
11S-L112M-04F 3.0 7.06 2.1 2.9 6.39 2.6 3.5 6.10 2.8 3.8 5.59 3.4 4.6 - - - 6 3532 12.2

11S-132S-04E 4.0 8.24 2.5 4.0 7.46 3.1 4.9 7.12 2.6 4.0 6.53 3.0 4.8 - - - 8 3510 14.3
100 1.22 10.0
11S-L132M-04F 5.5 11.1 2.5 3.9 10.00 3.1 4.7 9.52 2.6 3.9 8.73 3.0 4.7 - - - 11 3548 19.1
60 0.86 6.3
22S-132M/L-04G 7.5 15.3 3.2 4.2 13.8 3.9 5.1 13.2 3.2 4.2 12.1 3.8 5.0 - - - 15 3550 26.5

22S-160M-04E 9.2 19.1 3.0 3.6 17.2 3.6 4.4 16.4 3.0 3.7 15.0 3.6 4.4 - - - 18.4 3560 33.0
150 2.85 14.7
100 6.65 10.0
22S-160M-04F 11 22.8 3.0 3.6 20.7 3.6 4.4 19.8 3.0 3.7 18.1 3.6 4.4 - - - 22 3570 39.7

22S-180M-04E 15 31.1 3.4 3.9 28.1 4.2 4.7 26.9 3.5 3.9 24.6 4.1 4.7 - - - 30 3564 54.0
250 6.65 21.5
150 2.85 14.7
22S-180L-04F 18.5 36.7 2.5 3.4 33.2 3.1 4.2 31.7 2.6 3.5 29.0 3.0 4.1 - - - 37 3560 63.6

22S-200L-04E 22 47.2 3.1 3.7 42.7 3.7 4.5 40.8 3.1 3.8 37.4 3.7 4.5 - - - 44 3574 81.9
400 19.5 35
250 6.65 21.5
22S-200L-04F 30 61.5 3.3 3.4 55.6 4.1 4.2 53.1 3.4 3.5 48.7 4.0 4.1 - - - 60 3570 107

22S-225S/M-04E 37 71.9 3.2 3.6 65.0 3.9 4.4 62.1 3.2 3.7 56.9 3.8 4.4 - - - 74 3572 125
400 19.5 35 M
250 6.65 21.5
22S-225S/M-04F 45 89.6 3.3 3.8 81.0 4.1 4.6 77.4 3.4 3.8 70.9 4.0 4.6 - - - 90 3570 155
1000 45 73
22S-250S/M-04E 55 107 3.6 3.8 97.1 4.4 4.6 93.0 3.7 3.8 85.3 4.4 4.6 - - - 110 3576 187
400 19.5 35
22S-280S/M-04E 75 146 2.8 3.1 132 3.4 3.7 127 2.8 3.1 116 3.4 3.7 - - - 150 3582 254
1000 45 73
22S-280S/M-04F 90 171.58 2.6 2.8 155.24 3.2 3.4 147.41 2.7 2.8 135.13 3.2 3.4 - - - 180 3580 296
400 19.5 35
22S-280S/M-04G 110 209.47 3.0 3.0 189.52 3.6 3.6 180.86 3.0 3.0 165.79 3.6 3.6 - - - 220 3580 363

www.weg.net WG20 Gear Units and Geared Motors 589

 Dimension sheets
Integral motor frame sizes 63 - 132

L
E2 LB Y
HH
LL LM

S1 S1

AD
M

H2
Ø AC
ØN
ØP

S
D

α1
T
LB0 α

LB1 LB1 LB2

M
LB3 LB4

Description of the dimensions L, LB, LB0,... see page 594

Tolerances Dimension tolerances

Dimension name ISO tolerance DIN EN ISO 286-2 Dimension name Dimensions Permissible deviation

≤ Ø 30 mm j6 up to 200 mm ± 0.25 mm

D > Ø 30 mm to Ø 50 mm k6 M more than 200 up to 500 mm ± 0.5 mm

> Ø 50 mm m6 ore than 500 mm ± 1.0 mm

≤ Ø 250 mm j6 Dimensions in mm. Motor dimensions are typical values.

N
> Ø 250 mm h6 Subject to change.

590 WG20 Gear Units and Geared Motors www.weg.net

 IEC frame size 63 71 80 L80 90 L90 100 L100 112 L112 132 L132

AC 126 141 159 159 178 178 199 199 221 221 261 261

AD 128 136 145 145 155 155 165 165 185 185 205 205

D 16 19 24 24 24 24 34 34 34 34 42 42

E2 26 26 26 26 26 26 26 26 36 36 36 36

HH 83 91 88 88 88 88 107 107 117 117 122 122

H2 91 99 108 108 118 118 128 128 144 144 164 164

LL 108 108 108 108 108 108 108 108 137 137 137 137

LM 92 92 92 92 92 92 92 92 118 118 118 118

M 100 100 100 100 100 100 100 100 100 100 130 130

N 80 80 80 80 80 80 80 80 110 110 110 110

P 94 94 94 94 94 94 94 94 135 135 135 135

S M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M8 M8

S1 2 x M25 x 1.5 + 2 x M16 x 1.5 2 x M32 x 1.5 + 2 x M16 x 1.5

T 3 3 3 3 3 3 3 3 4 4 4 4

Y 25 26 30 30 33 33 36 36 41 41 50 50

α 4 x 90 ° 4 x 90 ° 4 x 90 ° 4 x 90° 4 x 90 ° 4 x 90 ° 4 x 90 ° 4 x 90 ° 4 x 90 ° 4 x 90 ° 4 x 90 ° 4 x 90 °

α1 45 ° 45 ° 45 ° 45° 45 ° 45 ° 45 ° 45 ° 45 ° 45 ° 45 ° 45 °

L 230 264 272 296 314 345 364 402 384 415 449 487

LB 204 238 246 270 288 319 338 376 348 379 413 451

LB0 173 196 205 229 242 273 285 323 290 321 359 397

LB1 248 287 304 328 361 392 422 460 435 466 531 569
M
LB2 - 358 381 405 437 468 500 538 511 542 614 652

LB3 322 347 365 389 422 453 476 514 493 524 598 636

LB4 392 417 435 459 485 516 532 570 549 580 650 688

www.weg.net WG20 Gear Units and Geared Motors 591

 Integral motor frame sizes 160 to 280

L
E2 LB Y
HH
LL LM

S1
S1

AD
M

H2
S
Ø AC
ØN
ØP

α
T
LB0

LB1 LB1 LB2

M LB3 LB4

Description of the dimensions L, LB, LB0,... see page 594

Tolerances Dimension tolerances

Dimension name ISO tolerance DIN EN ISO 286-2 Dimension name Dimensions Permissible deviation

D ≥ Ø 28 mm n6 up to 200 mm ± 0.25 mm

≤ Ø 250 mm j6 M more than 200 up to 500 mm ± 0.5 mm

N
> Ø 250 mm h6 more than 500 mm ± 1.0 mm

Dimensions in mm. Motor dimensions are typical values. Subject to change.

592 WG20 Gear Units and Geared Motors www.weg.net

 IEC frame size 160M 160L

Motor flange FR-200 FR-250 FR-300 FR-400 FR-550 FR-200 FR-250 FR-300 FR-400 FR-550
AC 329 329
AD 266 266
D 28 28
E2 61 66 71 84 100 61 66 71 84 100
HH 270 265 260 257 241 270 265 260 257 241
H2 213 213
LL 199 199
LM 190 190
M 165 215 265 300 400 165 215 265 300 400
N 130 180 230 300 450 130 180 230 300 450
P 200 250 300 400 550 200 250 300 400 550
S 12 15 15 19 19 12 15 15 19 19
S1 2 x M40 x 1.5 + 2 x M16 x 1.5 2 x M40 x 1.5 + 2 x M16 x 1.5
T 3,5 4 4 5 5 3,5 4 4 5 5
Y 65 65
α 4 x 90 ° 4 x 90 °
L 606 650
LB 545 540 535 522 506 589 584 579 566 550
LB0 480 475 470 457 441 524 519 514 501 485
LB1 669 664 659 646 630 713 708 703 690 674
LB2 747 742 737 724 708 791 786 781 768 752
LB3 757 752 747 734 718 801 796 791 778 762
LB4 823 818 813 800 784 867 862 857 844 828

IEC frame size 180M 180L

Motor flange FR-250 FR-300 FR-400 FR-550 FR-250 FR-300 FR-400 FR-550
AC 347 347
AD 281 281
D 32 32
E2 66 71 84 100 66 71 84 100
HH 303 298 285 269 303 298 285 269
H2 228 228
LL 199 199
LM 190 190
M 215 265 300 400 215 265 300 400
N 180 230 300 450 180 230 300 450
P 250 300 400 550 250 300 400 550
S 15 15 19 19 15 15 19 19
S1 2 x M40 x 1.5 + 2 x M16 x 1.5 2 x M40 x 1.5 + 2 x M16 x 1.5
T 4 4 5 5 4 4 5 5
Y 68 68
α
L
4 x 90 °
674
4 x 90 °
712
M
LB 608 603 590 574 646 641 628 612
LB0 531 526 513 497 569 564 551 535
LB1 726 721 708 692 764 759 746 730
LB2 839 834 821 805 877 872 859 843
LB3 828 823 810 794 866 861 848 832
LB4 893 888 875 859 931 926 913 897

IEC frame size 200L 225S/M 250S/M 280S/M

Motor flange FR-300 FR-400 FR-550 FR-400 FR-550 FR-550 FR-400 FR-550
AC 386 453 482 599
AD 317 385 403 472
D 38 38 / 48 * 48 48
E2 71 84 100 84 100 100 84 100
HH 348 335 319 286 270 261 326 310
H2 260 304 321 319
LL 230 269 268 314
LM 218 286 286 312
M 265 300 400 300 400 400 450 400
N 230 300 450 300 450 450 300 450
P 300 400 550 400 550 550 400 550
S 15 19 19 19 19 19 19 19
S1 2 x M50 x 1.5 + 2 x M16 x 1.5 2 x M50 x 1.5 + 2x M16 x 1.5 2 x M63 x 1.5 + 2 x M16 x 1.5 2 x M63 x 1,5 + 2 x M16 x 1,5
T 4 5 5 5 5 5 5 5
Y 78 85 85 108
α 4 x 90 ° 8 x 45 ° 8 x 45 ° 8 x 45 °
L 804 912 951 1089 1073
LB 733 720 704 828 812 851 989 973
LB0 629 616 600 714 698 737 861 845
LB1 859 846 830 946 930 969 1082 1066
LB2 977 964 948 1062 1046 1085 1183 1167
LB3 929 916 900 1100 1084 1123 1256 1240
LB4 1009 996 980 1100 1084 1123 1256 1240

* 22S-225S/M-04F / 22S-225S/M-04G

www.weg.net WG20 Gear Units and Geared Motors 593

 LB0

LB LB1

LB0

Length description
LBmotor modules LB1

LB0

LB LB1

LB0

LB1 LB1

LB0

LB1 LB1

LB0

LB1 LB1
LB Self ventilated LB1 Self ventilated with brake
LB0 Non-ventilated or back stop type RSM

LB1 LB2

LB1 LB2

LB1 LB2

LB2 LB3
M
LB2 LB3
LB1 Self ventilated with standard encoder, LB2 Self ventilated with brake and standard encoder,
SSI multiturn encoder or resolver SSI multiturn encoder or resolver

LB2 LB3

LB3 LB4

LB3 LB4

LB3 LB4

LB4
LB3 Forced ventilation with or without brake LB4 Forced ventilation with/without brake and standard encoder,
SSI multiturn encoder or resolver

LB4

594 WG20 Gear Units and Geared Motors www.weg.net

LB4
Motor modules
High / Low temperature execution

HT High temperature execution

LT Low temperature execution

To ensure steady operation even at increased or very low ambient temperatures, we offer specially adjusted motor executions
with more resistant components.

Temperature control

TH Bimetal switch for switch off

2TH Bimetal switch for warning and switch off
TF PTC thermistor for switch off
2TF PTC thermistor for warning and switch off
KTY Temperature sensor

In the standard version, the motors are designed with motor protection in the motor winding. In order to protect the winding of
a three-phase induction motor against thermal overloads, resulting for example from overloading and operation with only two
phases, one of the following devices can be provided:

TH - Bimetal switch „NC contact“ (+155 °C)

The contact is normally closed (NC); the disc opens when the winding’s temperature reaches limits dangerous for the insulation
system. When a limit temperature is reached, these bimetal switches (NC contacts) can deactivate an auxiliary circuit. The circuit
can only be reclosed following a considerable fall in temperature. When the motor current rises quickly (e.g. with a locked rotor),
these switches are not suitable due to their large thermal time constants.

TF - PTC thermistor (+155 °C)

The most comprehensive protection against thermal overloading caused in starting against heavy masses, heavy alternating
load and high frequency starting resp. brake operation or high ambient temperatures of the motor is provided by PTC thermis-
tors installed in the motor winding.
The sensors are temperature sensitive resistors (PTC) which change value almost instantaneously at their response temperature. M
The switch off level corresponds to the thermal class of the insulation. This characteristic is used in combination with tripping de-
vices (on request) to monitor the temperature of the motor. For warning purposes additional bimetal switches or PTC thermistors
with lower switch off temperature can be fitted. These correspond to the key 2TH and 2TF.

KTY - Temperature sensor

This sensor is a semiconductor that changes its resistance depending on temperature in accordance with a defined characteris-
tic. The evaluation is made by an extra tripping device (on request). The temperature sensor is embedded in the winding head of
the motor in the same manner as a PTC thermistor. Evaluation is performed, for example, in the frequency inverter.

Anti-condensation heating IEC frame size

Heating
performance [W]
71 13
SH Anti-condensation heating 80
90 25

Windings of motors, which are operating at conditions of extreme temperature changes or ex- 100

treme climatic conditions, are endangered of condensation water. The built in anti-condensation 112
50
heating warms up the motor windings after switching off and prevents the motor inside from 132

condensation water. 160

75
180

During motor operation the anti-condensation heating must not be switched on. The 200

limit temperature of the winding (+155 °C in thermal class F) must not be exceeded! 225
100
Temperature control is advisable! 250
280

The anti-condensation heating must be supplied with a separate voltage.

Supply voltage: 230 V (1~) - Voltage range for IEC frame sizes: 71 to 200: 220 - 240 V, 50/60 Hz

www.weg.net WG20 Gear Units and Geared Motors 595

 Climatic protection

K1 Humidity protection
K2 Corrosion protection

The following standardised climatic protection executions are available for motors exposed to extreme climatic conditions:

K1 - Humidity protection
Humid warm climate or humid variable climate with max. relative air humidity of 92 %, also for areas on the seaside

K2 - Corrosion protection
Relative air humidity of more than 92 % (extreme formation of condensation water), furthermore against chemically aggressive
gases and vapours of increased concentration

Drain

KB Drain

In cases of increased air humidity, periodic duty, installation in the open air or when subject to extreme climatic conditions, the
motors are endangered by the formation of condensation. The endshields have holes for drainage of water that may condense
inside the frame. These holes are supplied with rubber drain plugs, which leave the factory in closed position and must be
opened periodically to allow the exit of condensed water.

To determine the correct position of the hole the exact mounting position of the motor must be defined.

Terminal box designs

MIP Multipin box

MIG.. MIG - connect systems
M
MIP - Multipin box
IEC frame sizes: 63 to 280

This extended terminal box was designed to permit additional options, such as brakes, incremental encoders, thermal elements,
anti-condensation heating and the like, to be connected in an orderly fashion in the box.
The terminal box can be equipped with up to 22 sockets, including a brake rectifier. The terminal used are two-wire terminals
fitted with cage clamp connectors. These are suitable for single-wire, multi-wire and fine-wire lines with diameters up to 4 mm2.

HH
LM LL1 LL2
S3 S1
HK

S4 S2 S3
AD

H3
H2

596 WG20 Gear Units and Geared Motors www.weg.net

 MIP box
IEC frame size
AD HH HK H2 H3 LM LL1 LL2 S1 S2 S3 S4
63 132 90 69 95 99 130 52 122 2xM25 2xM25 4xM16 1xM20
71 140 99 69 103 107 130 52 122 2xM25 2xM25 4xM16 1xM20
80 149 95 69 112 116 130 52 122 2xM25 2xM25 4xM16 1xM20
90 159 96 69 122 126 130 52 122 2xM25 2xM25 4xM16 1xM20
100 169 109 69 132 136 130 52 122 2xM25 2xM25 4xM16 1xM20
112 182 130 70 144 154 140 68 138 2xM32 2xM32 4xM16 1xM25
132 202 123 70 164 174 140 68 138 2xM32 2xM32 4xM16 1xM25
FR-200 270
FR-250 265
160 FR-300 269 260 104 211 220 205 105 171 2xM50 2xM40 4xM16 1xM25
FR-400 257
FR-550 241
FR-250 303
FR-300 298
180 284 104 231 240 205 105 171 2xM50 2xM40 4xM16 1xM25
FR-400 285
FR-550 269
FR-300 348
200 FR-400 300 335 104 250 256 205 105 177 2xM50 2xM40 4xM16 1xM25
FR-550 319
FR-400 286
225 344 104 289 295 205 105 177 2xM50 2xM40 4xM16 1xM25
FR-550 270
250 FR-550 361 261 104 306 312 205 105 177 2xM50 2xM40 4xM16 1xM25
FR-400 326
280 427 104 372 378 205 105 177 2xM50 2xM40 4xM16 1xM25
FR-550 310
Dimensions in mm

MIG - connect system

Models: MIG10B, MIG16, MIG40, MIG10-FL
IEC frame sizes: 63 to 180 (MIG10-FL up to 250)

The MIG (Multiplug) - connect system is a standardised distributed connection system. It is used for the integration of power and
control cabling into a single motor connector. The plug is assembled in-house and replaces the terminal box.

Most important advantages:

▪ Quick installation and service at site
▪ Avoiding wiring faults M
▪ Motor replacement without electrical manipulation
For motor frame sizes 63 to 180 three MIG types of different power ratings are used. For each MIG model mating connectors
are available:

MIG10B:
With 18 PINs and ground this most compact plug enables connection to motors up to a rated current of 10 A with
voltages up to 400/690 V and protection degrees up to IP67. Beside the power wires a variety of auxiliary wires can be
connected as well.

MIG16:
This MIG for mid-sized motors supports a maximum current of 16 A at 500 V with 10 PINs in total. In case a wider
variety of auxiliary PINs is necessary a mixed holding can be offered (6 PINs -16 A; 12 PINs - auxiliary).

MIG40:
To achieve all contacts to be connected with one plug a mixed holding of
PINs has to be used in this case. 6 PINs for 40 A at 400/690 V together
with 12 PINs auxiliary guarantees full contactability.

For motor frame sizes 63 to 250 with forced ventilation the following MIG type
is available:

MIG10-FL:
On demand this MIG can replace the normal forced ventilation connection.
Thereby this motor module has all advantages of a MIG - connect plug
system. The plug is equipped with 3 PINs and grounding and can be
mounted on every forced ventilation size. MIG40 execution

www.weg.net WG20 Gear Units and Geared Motors 597

 MIG - connect system overview table

IEC frame size 63 71 80 90 100 112 132 160 180

4p 10B 10B 10B 10B 10B 16 16 40 40

400 V,
50 Hz
6p 10B 10B 10B 10B 10B 16 16 40 40

4p 10B 10B 10B 10B 16 - - - -

230 V,
50 Hz
6p 10B 10B 10B 10B 16 - - - -

4p 10B 10B 10B 10B 16 40 40 - -

400 V,
100 Hz
6p 10B 10B 10B 10B 10B 16 40 - -

4p 10B 10B 10B 10B 10B 16 16 40 40

460 V,
60 Hz
6p 10B 10B 10B 10B 10B 16 16 40 40

4p 10B 10B 10B 10B 16 16 40 - -

460 V,
120 Hz
6p 10B 10B 10B 10B 10B 16 40 - -

PIN assignment MIG10B PIN Assignment PIN Assignment

PE Grounding terminal 13 Brake
1 Winding connection U1 14 Brake
13 14 15 16 17 18
2 Winding connection V1 15 Brake microswitch
A B C D E F
PE PE 3 Winding connection W1 16 Brake microswitch
7 8 9 10 11 12
4* Bimetal release 1 TH1 17* Bimetal release 2 TH2
1 2 3 4 5 6 5 Brake heating tape 18* Bimetal release 2 TH2
6 Anti-condensation heating *alternatively
7 Winding connection W4 4 PTC thermistor 1 TF1
8 Winding connection U4 10 PTC thermistor 1 TF1
9 Winding connection V4 17 PTC thermistor 2 TF2
10* Bimetal release 1 TH1 17 Resistance thermometer KTY1
11 Brake heating tape 18 PTC thermistor 2 TF2
12 Anti-condensation heating 18 Resistance thermometer KTY 1

M PIN assignment MIG16 PIN Assignment PIN Assignment

PE Grounding terminal 8 Winding connection V4
1 Winding connection U1 9* Temperature sensor 1
2 Winding connection V1 10* Temperature sensor 1
6 7 8 9 10
PE PE 3 Winding connection W1 *alternatively
1 2 3 4 5 4* Brake 9 Anti-condensation heating
5* Brake 10 Anti-condensation heating
6 Winding connection W4 4 Temperature sensor 2
7 Winding connection U4 5 Temperature sensor 2

PIN assignment MIG40 PIN Assignment PIN Assignment

PE Grounding terminal 4 Temperature sensor 3
7 1 1L 1R 1R Winding connection U1 5 Anti-condensation heating
8 2 2R Winding connection V1 6
9 3
2L 2R 3R Winding connection W1 7 Brake
PE 10 4 PE 1L Winding connection W4 8 Temperature sensor 1
11 5
3L 3R 2L Winding connection U4 9 Temperature sensor 2
12 6
3L Winding connection V4 10 Temperature sensor 3
1 Brake 11 Anti-condensation heating
2 Temperature sensor 1 12
3 Temperature sensor 2

PIN assignment MIG10-FL PIN Assignment

PE Grounding terminal
1 Power connection L1
1 2 Power connection L2
PE
3 Power connection L3
3 2

598 WG20 Gear Units and Geared Motors www.weg.net

 Dimension sheet MIG10B, MIG16, MIG40
MIG - connect system
IEC
frame size MIG
AD HH HK LL LM
HH Type
LM 63 10B 124 90 61 82 86
LL 71 10B 132 99 61 82 86
80 10B 141 95 61 82 86
90 10B 151 96 61 82 86

HK
100 10B / 16 161 109 61 82 86
112 16 / 40 173 130 61 82 86

AD
132 16 / 40 193 123 61 82 86
FR-200 270
FR-250 265
160 FR-300 40 226 260 61 82 86
FR-400 257
FR-550 241
FR-250 303
FR-300 298
180 40 241 61 82 86
FR-400 285
FR-550 269

Dimensions in mm

Dimension sheet MIG10-FL

IEC MIG10-FL
frame size
AD HK □LL LM
63 118
HK □LL 71 124
LM

80 134
90 143
100 152
112 164
28 107 32
AD

132 185
160 211
180 211
200 211
225 211
250 211

Dimensions in mm

M
Brake system and Back stop

BR.. Spring loaded brake

BBRHGD.. Double spring loaded brake
BRGH.. Totally closed spring loaded brake (Heavy Duty)
KKM Back stop (frame sizes 63 to 90)
RSM Back stop (frame sizes 100 to 250) b

The mounted spring loaded brake is a single-disc brake with two friction surfaces. It is released
electromagnetically and brakes by spring pressure, when the brake is de-energised. The DC-brake
coil is supplied from a rectifier which is located in the motor terminal box and will be delivered as
standard for AC-side connection.

Product information
▪ Voltages: S tandard: 190 V DC (BR4, 8, 16, 32) or
195 V DC (BR2, 5, 10, 20, 40, 60, 100, 150, 250, 400, 1000)
Optional: 24 V DC
Special execution: 102/103 V DC a
▪ All bare parts corrosion protected
▪ Short switching times a air gap
▪ Large reserve for abrasion b brake lining thickness
▪ Designed for 100 % duty cycle and max. admissible temperature limit of +145 °C
▪ Degree of protection IP55 (standard)
On motors with brake-endshield on the non-driven side subsequent installation of brakes is possible (brake-motor-set available).

www.weg.net WG20 Gear Units and Geared Motors 599

 Function and adjustment (see illustration below)
When the brake is de-energised, the springs are pressing the armature disc (9) against the brake disc (7) and the friction plate
(5). The motor shaft (3) is braked via the brake disc (7) and the gear hub (6). When the brake is energised, a magnetic field is
built up and the armature disc (9) is pulled against the magnetic case with the coil (10). When the motor is running, the brake
disc (7) can rotate freely from the brake surfaces. In the case of power failure, the brake functions automatically by spring force.
A manual release (11) is optionally available (subsequent assembling is also possible).

Braking torque adjustment

At delivering, the brakes and the brake motors are adjusted to the brake torque MB. Brake torque reduction is done by removing
of springs. Reduced brake torque on request.

Maintenance
Due to abrasion of the friction linings (7) the air gap "a" (see page 389) between magnetic case (10) and armature disc (9) ex-
pands. It is necessary to check and readjust the air gap in certain intervals or replace the brake disc (7).

Readjustment of the air gap

First of all the three fixing screws (13) must be loosened half a turn. Now the sleeve screws (8) can be screwed into the magnetic
case (10) by turning counter-clockwise. By turning the three fixing screws (13) clockwise, the magnetic case (10) can be moved
in direction to the armature disc (9), as long as the nominal air gap anormal (see table on page 602) is obtained. Now the three
sleeve screws (8) will be unscrewed clockwise from the magnetic case (10) and the fixing screws (13) will be fixed. Please check
the air gap "a" with a feeler gauge, if it is symmetrical and adjust it if necessary.

11
12

2
5
9
14
16
19

1
3
4
6
7
8
10
13
15
17
18
20

1 Brake endshield 11 Manual release lever (optional)

2 Key 12 Locking device
3 Motor shaft 13 Socket cap screw
4 Dust protection ring 14 Key
5 Friction plate 15 Brake shaft extension
6 Gear hub 16 Fan
7 Brake disc with friction linings 17 Socket cap screw
8 Sleeve screws 18 Retaining ring
9 Armature disc 19 Fan cover screws
10 Magnetic case 20 Fan cover (brake execution)

Exploded view: Brake with manual release and locking device, frame size 100

600 WG20 Gear Units and Geared Motors www.weg.net

Brake selection
As shown in the following selection table, it is possible to supply brake motors with different brake torques to correspond to the
most possible applications. It is also possible to achieve an optimal adaption, by means of the mode of connection of the brake.
If exact values about the application are available, we recommend to calculate the braking torque according to the following
formulas on page 606, otherwise the proportion between motor rated torque (MN) and braking torque (MB) can be taken as an
indication for the dimensioning of the brake and check, if the safety factor is sufficient.
For normal applications we recommend sizing the brake 1.5 - 2 times the motor rated torque (MN), for special applications
(lifting gears, switching operation, etc.) 2 - 3 times the motor torque and as holding brake approx. 1 time the rated torque.

Reduced brake torques on request.

▪ Execution A - working brake

MB approx. 1.5 - 2 times MN, or applications with medium masses to be accelerated and medium number of starts

▪ Execution B - holding brake

MB approx. 1 time MN for drives with small masses to be accelerated and number of starts resp. for keeping the drive
stopped

Brake selection table

BR.. BBRHGD.. BRGH..

Standard brake Double brake Totally closed brake
IEC
frame size Standard Standard Standard
Execution A Execution B Execution A Execution B Execution A Execution B
MB MB MB MB MB MB
63 2 Nm 4 Nm - - - -

71 4 Nm 2 Nm 2 x 6 Nm - 5 Nm -

80 8 Nm 4 Nm 2 x 12,5 Nm 2 x 6 Nm 10 Nm 5 Nm

90 16 Nm 8 Nm 2 x 25 Nm 2 x 12,5 Nm 20 Nm 10 Nm

100 32 Nm 16 Nm 2 x 50 Nm 2 x 25 Nm 40 Nm 20 Nm

112 60 Nm 32 Nm 2 x 75 Nm 2 x 50 Nm 60 Nm 40 Nm

132 100 Nm 60 Nm 2 x 125 Nm 2 x 75 Nm 100 Nm 60 Nm

160 150 Nm 100 Nm 2 x 187 Nm 2 x 125 Nm 150 Nm 100 Nm

180 250 Nm 150 Nm 2 x 300 Nm 2 x 187 Nm 250 Nm 150 Nm M

200 400 Nm 250 Nm 2 x 500 Nm 2 x 300 Nm 400 Nm 250 Nm

225 400 Nm 250 Nm 2 x 500 Nm 2 x 300 Nm 400 Nm 250 Nm

250 1000 Nm 400 Nm 2 x 1200 Nm 2 x 500 Nm 1000 Nm 400 Nm

280 1000 Nm 400 Nm 2 x 1200 Nm 2 x 500 Nm 1000 Nm 400 Nm

Spring loaded brake: electrical characteristics

U2nenn= U2= Brake size 2** 4* 5** 8* 10** 16* 20** 32* 40** 60** 100** 150** 250** 400** 1000**

[V] [V] MB [Nm] 2 4 5 8 10 16 20 32 40 60 100 150 250 400 1000

Coil current [A] 0.13 0.11 0.13 0.13 0.18 0.16 0.20 0.21 0.26 0.32 0.42 0.50 0.65 0.85 0.83
190* 170-210
Power [W] 26 20 26 25 36 30 38 40 50 63 82 99 127 165 162
195** 162-236
Resistance [Ω] 1475 1805 1475 1444 1070 1203 990 903 754 600 464 385 300 230 235

Coil current [A] 1.14 0.83 1.14 1.04 1.44 1.25 1.70 1.66 2.10 2.70 3.30 4.00 5.20 7.30 -

24 19-28 Power [W] 27 20 27 25 34 30 41 40 50 65 80 96 125 175 -

Resistance [Ω] 21 29 21 23 17 19 14 14 12 8.9 7.2 6.0 4.6 3.3 -

Coil current [A] 0.30 0.19 0.30 0.24 0.38 0.31 0.45 0.39 0.53 0.60 0.85 0.94 1.23 1.76 -
102 1) ** 85-133
Power [W] 31 20 31 25 38 32 46 40 54 60 87 95 125 179 -
103 1) * 93-113
Resistance [Ω] 340 531 340 424 271 332 228 265 192 174 120 109 83 58 -

standard brake 1) special execution (on demand) * U2nenn = 190 / 103 V ** U2nenn = 195 / 102 V

www.weg.net WG20 Gear Units and Geared Motors 601

 Spring loaded brake: mechanical characteristics

Brake size 2 4 5 8 10 16 20 32 40 60 100 150 250 400 1000

MB [Nm] 2 4 5 8 10 16 20 32 40 60 100 150 250 400 1000

M BS [Nm] - 6 7.5 12 15 24 30 48 60 90 150 225 375 600 1500

P 20 [W] 26 20 26 25 36 30 38 40 50 63 82 100 127 165 162

JB [kgm²x10 -3] 0.015 0.015 0.015 0.061 0.045 0.20 0.172 0.45 0.45 0.86 1.22 2.85 6.65 19.5 45

PR [J/s] 80 * 80 * 100 * 130 * 160 200 250 300 350 400 450

WRmax [Jx10³] 3 3 3 7.5 6 12 12 24 25 35 50 75 105 150 200

WRN [Jx10 7] 5 8.5 5 15.8 12 26.4 20 53 35 60 125 200 340 420 450

anormal [mm] 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.4 0.4 0.5 0.5 0.6

amax [mm] 0.6 0.5 0.6 0.5 0.7 0.5 0.8 0.75 0.9 1.0 1.1 1.1 1.2 1.2 1.7

bmin [mm] 4.5 4.5 4.5 5.5 5.5 7.5 7.5 8.0 9.5 11.5 12.5 14.5 16.5 16.5 21

m [kg] 1.1 1.0 1.1 1.6 1.9 3.1 3.1 4.2 4.6 6.3 10 14.7 21.5 35 73

t 2= [ms] 35 45 35 57 45 76 60 115 80 120 160 200 220 300 320

t 1≈ [ms] 70 * 70 * 95 * 140 * 175 210 280 350 500 800 3000

t 1= [ms] 30 28 30 31 45 47 60 53 75 90 120 150 180 200 160

Fits on IEC motor frame 63, 71, 63, 71, 180, 200, 225
63, 71 80, 90 80, 90 90, 100 90, 100 100, 112 100, 112 112, 132 132, 160 160, 180 250, 280
size 80 80 200, 225 250, 280

* on request

Designation Unit Designation Unit

Rated torque of spring loaded brake MB [Nm] Minimum brake rotor thickness b [mm]
Holding torque of the spring loaded brake M BS [Nm] Mass of moved machine parts m [kg]
Brake coil power consumption P 20 [W] Engaging time t1 [ms]
Brake moment of inertia JB [kgm²] Release time of brake t2 [ms]
Frisction performance PR [J/s] Output voltage DC rectifier U2= [V]
Friction per switch cycle WRmax [J] For DC switching = -
Friction until readjustment WRN [J] For AC switching ≈ -

M Air gap a [mm]

602 WG20 Gear Units and Geared Motors www.weg.net

BR.. - Spring loaded brake
Degree of protection IP55.

BR.. Spring loaded brake without additional options

Ordering examples:
Possible options:
BRH.. With manual release BR5 Brake 4 Nm
BRHA.. With manual release and locking device
BRR.. With corrosion protection IP55 BRHASRGD32 Brake 32 Nm with manual release,
BRS.. With dust protection IP65 locking device, dust and corrosion
BRSR.. With dust and corrosion protection IP65 protection and low noise execution
BRGD.. Low noise execution

BRM - Micro switch

When brake release monitoring is necessary, a micro switch (5) can be fitted to indicate brake release. This signal can
be used to start the electric motor. When air gap “a” (see page 599) is at its maximum and the armature is no longer
attracted to the magnet body the motor will not start and air gap “a” must be adjusted.
The installation of the micro switch is possible for brake sizes 5, 10, 20, 40, 60, 100, 150, 250, 400 and 1000.

BRH.. - Manual release

The installation of the manual release is possible for brakes > 4 Nm. The manual release (1) is necessary for manually
releasing the brake in cases of power failure. Brakes will be supplied with manual releases fitted by factory. The
adjustment of the manual release may not be changed, not even when air gap “a” (see page 599) is readjusted, as
safety can be adversely affected.

BRHA.. - Manual release with locking device

In case of service the manual release can be fastened with a locking device. Take care that in rated condition the brake
is released (see illustration on page 604). The 0 ° position of the manual release with locking device is only possible
with motor frame sizes 225, 250 and 280.

BRR.. - Corrosion protection

Protection class IP55. Consists of painted brake endshield and friction plate (3), which is made of non-corrosive material.
M
BRS.. - Dust protection
Protection class IP65. Consists of friction plate (3), which is made of non-corrosive material, dust protection ring (2) and
shaft seal.

BRSR.. - Corrosion and dust protection

Protection class IP65. Consists of painted brake endshield, friction plate (3), which is made of a non-corrosive material,
dust protection ring (2) and shaft seal.

BRGD.. - Low noise execution

To reduce the switching noises of the spring loaded brake, the o-ring (4) can be inserted between armature plate and
brake body.
1 10°+3°

1 Manual release
2 Dust protection ring
3 Friction plate
4 O-ring 5 4
5 Micro switch (optional)

www.weg.net WG20 Gear Units and Geared Motors 603

 0° (Standard)

300° 60°

240° 120°

180°
Manual release with locking device (from brake size 4 Nm) Possible positions of the manual release at the view
of the motor fan cover. (The 0 ° position of the manual
release with locking device is only possible with motor
frame sizes 225, 250 and 280.)

BBRHGD.. - Double spring loaded brake

Double brakes (from motor frame size 71) are two specially designed low noise brakes working independently of each other
meeting high demands on safety.
As option a micro switch (5) is monitoring the function of the brakes. The brakes are executed per default in low noise execution
and with manual release.

Ordering examples:
BBRHGD.. Double brake in low noise execution with manual
release (standard) BBRHGD6 Double brake 2 x 6 Nm in
low noise execution with
Possible options: manual release
BBRHSGD.. With dust protection IP65
BBRGD.. Without manual release BBRHSGD187 Double brake 2 x 187 Nm
in low noise exec. with man.

M release and dust protection

BBRM - Micro switch

When brake release monitoring is necessary, a micro switch (5) can be fitted to indicate brake release. This signal can
be used to start the electric motor. When air gap “a” (see page 599) is at its maximum and the armature is no longer
attracted to the magnet body the motor will not start and air gap “a” must be re-adjusted.

BBRHSGD.. - Dust protection 10°+3°

1 10°+3°
Protection class IP65. Consists of friction plate
(3), which is made of non-corrosive material, dust
protection ring (2) and shaft seal.
2 4
BBRHGD.. - Manual release
3
The manual release (1) for manually releasing of
the brake in cases of power failure. Brakes will be
supplied in standard with manual release fitted
by factory. The adjustment of the manual release
may not be changed, not even when air gap “a”
(see page 599) is readjusted, as security can be
adversely affected.

Possible positions of the manual release see on 5

page 604.

1 Manual release 4 O-ring

2 Dust protection ring 5 Micro switch (optional)
3 Friction plate

604 WG20 Gear Units and Geared Motors www.weg.net

BRGH - Totally closed spring loaded brake „heavy duty“
The fully capsulated brake design with dust and waterproof cable glands is in accordance with protection degree IP66. On
ventilated motor executions IC411 the shaft passage is sealed by sealrings. The brake is executed with manual release in
standard. On the brake disc a lining for high loads is fitted. Brake selection table see page 601.

BRGH.. Totally closed spring loaded brake with manual Ordering examples:
release
BRGH10 Brake 10 Nm
Possible options: with manual release
BRGHA.. With manual release and locking device
BRG.. Without manual release BRGHA150 Brake 150 Nm with manual
release and locking device

BRGH.. - Manual release

The manual release (1) is necessary for manually releasing the brake in cases of power failure. Brakes will be supplied in
standard with manual release fitted by factory.
The adjustment of the manual release may not be changed, not even when air gap “a” (see page 599) is readjusted, as
safety can be adversely affected.

Possible positions of the manual release see on page 604.

1 10°+3°

1 Manual release

Anti-condensation heating for brakes

When operating at conditions of extreme temperature changes or extreme climatic conditions, the windings are endangered of
condensation water. The built in anti-condensation heater warms up the magnet windings after switching off and prevents the
brakes inside from condensation water.
The anti-condensation heating must be supplied with a separate voltage.
Brake size* Performance
Supply voltage 230 V (1~) [Nm] [W]
Voltage range: 220 - 230 V, 50/60 Hz 10 16
20 29
40 33
60 35
100 48
150 53
250 70
400 128
* The anti-condensation heating for brakes is only available for the brake sizes indicated in the table. 1000 131

www.weg.net WG20 Gear Units and Geared Motors 605

 Calculation of the brake torque
If the mass moment of inertia, the rotation speed and the permissible braking time of the machine are known, the torque of the
spring loaded brake can be calculated.

Formula Unit

Load moment (static load) ML = F · r [Nm]

2 n
Braking torque (dynamic load) Ma = 1,046 · 10 · Jzus · t - t1
There is a pure dynamic load if fly-wheels, rolls, etc. [Nm]
have to be slowed down and when the static load is very insignificant. Maerf = Ma · K ≤ MB
Maerf = (Ma ± ML) ∙ K
Braking torque (dynamic and static load)
n most applications there is also dynamic load in addition to static load.
Maerf = (1,046 · 102 · Jzus · n
tB
± ML) · K [Nm]

Maerf ≤ MB
Maerf = 9,55 · 103 · P
n
·K
Estimated determination of braking torque [Nm]
Maerf ≤ MB
Deceleration time t = tB + t1 [ms]
Jges · n1
tA = 9,55 · (MA ± ML)
+ t2 [s]
Acceleration time
Jges = JE + Jzus [kgm²]

tB = 9,55J· (M· n± M )
ges

A
1

L
[s]
Braking time
Jges = JE + Jzus [kgm²]

The conversion of several mass moments of inertia with J2 · n22 + J3 · n32 ...
different rotation speeds in a mass moment of inertia reduced to the motor shaft
Jzus = n12 [kgm²]

Conversion of straight-line moved machine parts

J = 91,2 · m · nv
2

2 [kgm²]
into a corresponding J on the motor shaft 1

Jzus · n2
WR = 182,5
∙ M M± M B
B

L
Friction per switch cycle [J]
WR < WRmax
PR = WR · S
M Friction performance
PR < PRmax
[J/s]

Designation Unit Description Designation Unit Description

Load moment Jzus [kgm²] Additional mass moment of inertia

Sign + : when the load moment acts decelerating K - Safety factor K ≥ 2
ML [Nm] (lifts when going up)
Sign - : when the load moment acts accelerating P [kW] Power
(lifts when going down) PR [J/s] Friction performance
Maerf [Nm] Necessary braking torque P Rmax [J/s] Maximum friction performance
Ma [Nm] Braking torque n [min-1] Rotation speed
MA [Nm] Starting torque of motor n1 [min-1] Rotation speed of motor
MB [Nm] Rated torque of spring loaded brake n2, n3 [min-1] Rotation speeds

Safety factor t [ms] Deceleration time

K -
according to the operating conditions (1...3) tA [s] Acceleration time
F [N] Force tB [s] Braking time
FI - Factor of inertia t1 [ms] Engaging time
r [m] Lever arm t2 [ms] Release time of brake
m [kg] Mass of moved machine parts v [m/s] Speed
J, J1, J2 [kgm²] Mass moment of inertia WR [J] Friction work per switch cycle
JE [kgm²] Proper mass moment of inertia WRmax [J] Permissible friction per switch cycle
Jges [kgm²] Total mass moment of inertia S [s-1] Number of switch cycle per second
Jmot [kgm²] Mass moment of inertia of the motor

606 WG20 Gear Units and Geared Motors www.weg.net

Rectifier

Power supply
The DC-brake coil is normally supplied by a half wave rectifier incorporated in the motor terminal box and is also
available for coil voltages 162-236 V DC, 85-133 V DC or 24 V DC (24 V with block terminal for external power supply!)
Corresponding rectifiers and coil voltages are optionally available for all special voltages. The rectifiers are equipped with
varistors to protect them against over-voltages.
At number of starts more than 1/s, please contact us for rectifier loading capacity.

Switching modes
By default brake motors will be delivered with connected rectifier for AC-side switching. For DC-side switching the
bridge between terminals 5 and 6 must be removed and a switching contact must be connected. Start-up of motor only
with connecting brake.

▪ AC-side switching is executed before the rectifier on AC-side. Here the magnetic field is de-energised slowly, the
brake interrupts softly with delay. (Release time t1≈)

▪ DC-side switching is executed between rectifier and coil. Thereby an extremely low degree of overrunning is
achieved. For all gear units, which require exact braking, especially for lifting gears, a DC-side switching of the brake
is absolutely required. (Release time t1=)

MB Designation Unit
Braking torque MB [Nm]
Voltage U [V DC]
t Engaging time t1 [ms]
U Response delay (time from switching power off until
t11 [ms]
braking torque increases)
Release time (time from switching power on until
t2 [ms]
braking torque begins to decrease)
t
t11 t2
t1

Rectifier selection
▪ Half-wave and bridge rectifier M
The half wave rectifier which halves the supply voltage is the most cost effective. The bridge rectifier produces 90 % DC
voltage from the AC supply voltage. Both rectifiers are available for switching on AC or DC side. Varistors in the input
and output protect the rectifiers against surge voltages.

Half-wave rectifier: U2= = 0.45 x U1~ Imax = 1 A

Bridge rectifier: U2= = 0.9 x U1~ Imax = 2 A

▪ Fast excitation rectifier

For motor frame sizes 63-132 this rectifier can't be installed in the standard terminal box.
The high-speed rectifier uses special connections to make different direct voltages available on the terminals. This
means that the following brake operating modes can be selected:

1. Rapid response: Brake voltage level equal to the holding voltage of the fast excitation rectifier: The ventilation time of
the brake is reduced.
2. Power reduction: Brake voltage level equal to overexcitation voltage of the fast excitation rectifier: reduced
performance losses in the brake coil, engage time of the brake is reduced.

Max. connection voltage: U1~ = 500 V AC Rectifier type System UN IN

Max. permissible connections: 600 connections/h [V] [A]
Max. permissible switching capacity: 210 W PMEAF500-S Half-wave rectifier 500 1
PMBAF400-S Bridge rectifier 400 2
PMG480-S Fast excitiation rectifier 500 2

Overexcitation phase (voltage) T = 0 - 500 ms (± 200 ms) U2= = 0.9 x U1~ IN = 4 A

Holding phase (voltage) T > 500 ms U2= = 0.45 x U1~ IN = 2 A

www.weg.net WG20 Gear Units and Geared Motors 607

 Switching diagram for braking motors
▪  C switching -
A ▪  C switching -
A
Motor frame sizes 63-80 (Multi-Voltage-Motor) Motor frame sizes 80-100 (EUSAS-Motor)
L1 L1
L2 Y connection L2 Y connection
L3 L3
400 V - 50 Hz 400 V - 50 Hz
K1 K1

Half-wave rectifier Half-wave rectifier

W1 W1
U1 V1 PMEAF500-S U1 V1 PMEAF500-S

W2 U2 V2 W4 U4 V4

W2 U2 V2
U1 U2 W3 U3 V3 U1 U2

▪ AC switching - Motor frame sizes 112-280 (EUSAS-Motor)

L1 L1
L2 Δ connection L2 Y connection
L3 L3
400 V - 50 Hz 690 V - 50 Hz
K1 K1

Half-wave rectifier Half-wave rectifier

W1 W1
U1 V1 PMEAF500-S U1 V1 PMEAF500-S

W4 U4 V4 W4 U4 V4

W2 U2 V2 W2 U2 V2
W3 U3 V3 U1 U2 W3 U3 V3 U1 U2

▪ DC switching
L1
L2
L3

K1

Terminal

M
board

U1 U2

Connection examples
Multi-Voltage Motor
Motor frame size Connection 50 Hz 60 Hz Rectifier model Brake coil voltage
3~ U N [V] U1~ [V] U2= [V] 3~ U N [V] U1~ [V] U2= [V] [V]
63-80 400 400 180 460 460 207 PMEAF500-S 195

EUSAS Motor
Motor frame size Connection 50 Hz 60 Hz Rectifier model Brake coil voltage
3~ U N [V] U1~ [V] U2= [V] 3~ U N [V] U1~ [V] U2= [V] [V]
80-100 400 400 180 460 460 207 PMEAF500-S 195
400 400 180 460 460 207 PMEAF500-S 195
112-280
690 400 180 - - - PMEAF500-S 195

Designation Unit Designation Unit

Maximum rated output current DC rectifier IN [A] 3~ rated motor voltage 3~ U N [V]
Maximum rated input voltage AC rectifier UN [V] Supply voltage AC rectifier U1~ [V]
Output voltage DC rectifier U2= [V]

608 WG20 Gear Units and Geared Motors www.weg.net

Back stop
Installing a back stop guarantees that the motor
a. can start only in one direction
b. can't be turned in wrong direction from counteract torques

KKM Back stop (IEC frame size 63 to 90)

RSM Back stop (IEC frame size 100 to 250)

The applied free wheels of the clamping bodies are IEC frame size Back stop type Torque Motor length dimension
mounted on the motor endshield (NDE) in such a [Nm] (see page 590)
manner, that the standard motor dimension LB up 63 KKM 7.4 LB
to motor size 90 will not be lengthened. From motor 71 KKM 13.5 LB
size 100 the motor dimension LB1 is valid. 80 KKM 40 LB
90 KKM 68 LB
The back stop has been largely dimensioned and
100 RSM 150 LB1
corresponds approx. to the motor starting torque (MA) to 112 RSM 150 LB1
prevent a damage in case of short-time-starting against 132 RSM 390 LB1
the back stop at switchings made by error. Nevertheless, 160 RSM 580 LB1
the free direction of rotation must be determined first, 180 RSM 580 LB1
especially at big motor powers and we recommend for 200 RSM 1050 LB1
the first starting the star connection and only then the 225 RSM 1050 LB1
250 RSM 2100 LB1
delta connection at correct rotation.

Fields of application:
▪ Drives for elevators and inclined lifts
▪ Pumps and fans with backpressure ratchet
▪ Gearmotors for conveyors with non-reverse characteristic
KKM - Back stop (ball bearing free-wheelings)
The elements have bearing characteristics and are used instead of the bearing on the fan side. The outer dimensions are
identical to the deep-groove ball bearings.

▪ Function
Rolling elements and spring loaded clamping bodies are built in between inner and outer ring. The rolling elements and
ratchet elements are fixed in a plastic cage. Torque transmitting is made by tight fits on the inner and outer ring. M
The elements are grease prelubricated. They are maintenance-free for 10,000 to 20,000 hours under normal working
conditions.

▪ Mounting
The KKM back stop will be mounted instead of the bearing on the non-driven side.

RSM - Back stop (with centrifugal mechanism)

Because the mounted back stops have no bearing properties, they are mounted directly near the non-drive bearing.
Above the lifting speed the centrifugal elements are working contactless and so they are maintenance free under normal
conditions.

▪ Mounting
The centrifugal elements are mounted directly near the non-driven side
bearing between bearing and fan under the fan cover. The inner ring
of the back stop is connected with the shaft with a key DIN 6885-1.

▪ Direction of rotation
The direction of rotation has to be given with the ordering.

▪ Back stop direction

Back stop direction at a view on output shaft right or left. back stop direction back stop direction
By turning the entire back stop system by 180 °, the back stop direction left right
can be reversed (applies only for RSM!).

www.weg.net WG20 Gear Units and Geared Motors 609

 Encoder systems

I. Encoder outside the fan cover

S. Encoder inside the fan cover

Encoder outside the fan cover Standard position connector (M23) Encoder inside the fan cover

Modular design
We are using encoders with hollow shaft (ø 12 mm) open at one end. The modular motor shafts are fit to attach an encoder set.
The mounting of encoders therefore is easy and immediately possible. Add-on kits are easy to retrofit.

Mounting of encoders
The encoders are equipped with an integral bearing and connected directly on the non-driven motor shaft side. During angular
acceleration of the shaft the stator coupling must absorb only the torque resulting from friction in the bearing.
IG, SG - Standard encoder
Available for IEC motor frame sizes 63 to 250 (IG) / 71 to 280 (SG)
Type: Kübler Sendix 5020
Pulses per revolution: 1024
Output signal: HTL or TTL
Voltage supply: 10-30 V at HTL, 5 V at TTL
Degree of protection: IP66
IG standard: with PIN connector (M23) on the encoder
M SG standard: with PIN connector (M23) on the terminal box (mating connector not included in delivery)

Other numbers of pulses per revolution on request.

IC, SC - SINCOS encoder

Available for IEC motor frame sizes 80 to 225 (IC) / 80 to 280 (SC)
Pulses per revolution: 1024
Output signal: Sinus 1VSS
Voltage supply: 10-30 V or 5 V
IC standard: with PIN connector (M23) on the encoder
SC standard: with PIN connector (M23) on the terminal box (mating connector not included in delivery)

Other numbers of pulses per revolution on request.

Encoders in standard mechanical designs can also be implemented as electric SINCOS versions. In this case, signals A and
B are available on the output as sinusoidal voltage signals with a signal level of 1 VSS or one 0 pulse once per rotation. These
can be used in many different ways in the downstream electronics. Via interpolation of the two signals shifted by 90 °, very high
resolutions are achieved and can therefore also be used with very slow movements for speed control.

IR, SR - Resolver
Available for IEC motor frame sizes 71 to 200
Degree of protection: IP54 (IP66 on request)
IR standard: with 0.6 m cable (open one way, 6 strands)
SR standard: with 0.6 m cable (open one way, 6 strands)

Resolvers are primarily 2-pole, electromagnetic measuring transducers for converting the angle position of a rotor into an
electrical value. Resolvers are wear-free and robust, as the most important elements for acquiring the information consist only of
iron core and copper coils. Contamination therefore plays a lesser role.

610 WG20 Gear Units and Geared Motors www.weg.net

The configuration consists of 2 stator coils positioned at an offset of 90 ° (S1/S3 and S2/S4) and a rotating rotor coil (R1/R2).
In this process, the rotor coil supply is inductive, in other words, brushless. The R1/R2 rotor coil is excited using a sinusoidal
alternating voltage. The amplitudes of the voltages induced in stator coils S1/S3 and S2/S4 depend on the rotor angle.

Input voltage: E(R1/R2) = E x sin(ωt)

Output: E(S1/S3) = Tr x E(R1/R2) x cos(φ)

E(S2/S4) = Tr x E(R1/R2) x sin(φ)

Standard input voltage: E(R1/R2) = 7 V

Standard transformation ratio: Tr = 0.5

SS - SSI multi turn encoder

Available for IEC motor frame sizes 71 to 280
Digits per revolution: 8192 at 4096 possible rotations
Output signal: TTL
Voltage supply: 5 V
Degree of protection: IP66
SS standard execution: with PIN connector on the terminal box

The SSI multiturn absolute encoder signalises a single exactly defined position to the drive frequency controller. Maximum
permissable number of motor revolutions can be 4096. The resolution is 8192 steps per revolution. The serial communication is
corresponding to the specification of the SSI-protocol. SSI means Synchronous Serial Interface.

The permissible cable length is 100 m at least if EMC-compatible wiring is guaranteed.

SV - Heavy Duty encoder

Available for IEC motor frame sizes 90 to 250
Pulses per revolution: 1024
Output signal: HTL or TTL
Voltage supply: 10 - 30 V at HTL, 5 V at TTL
Degree of protection: IP65
Optional insulation inserts available to protect against shaft currents.

The Heavy Duty encoder boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect
for all applications in very harsh environments. M
IA, SA - Special encoder
The mounting of special encoders is possible on request.

Type of signal
▪ HTL-/TTL - output signal
Encoders with HTL/TTL square-wave output signals incorporate a circuit that digitises scanning signals, providing two
90 ° (el.) phase-shifted HTL-/TTL square-wave pulse trains Ua1 and Ua2 and a reference pulse Ua0, which is gated with
the incremental signals Ua1 and Ua2.
The integrated electronics also generate the inverse signals of all square-wave pulse trains. The distance between two
successive edges of the combined pulse trains Ua1 and Ua2 is one measuring step. HTL/TTL square-wave signals
can be transmitted to the subsequent electronics (without inverting: max. cable length 100 m; with inverting: 250 m),
provided that the specified 5 V ± 5 % supply voltage is maintained at the encoder.

Extended cable length is possible with fiber-optic cable.

HTL/TTL HTL signal levels

SP
UH ≥ 2.1 V at IH = 20 mA
Ua1 UL ≤ 2.8 V at IL = 20 mA
0 with power supply +24 V, without cable
Ua2
0 a TTL signal levels
UH ≥ 2.5 V at IH = 20 mA
Ua0 UL ≤ 0.5 V at IL = 20 mA
0 td td

www.weg.net WG20 Gear Units and Geared Motors 611

 ▪ 1VPP - output signals
The sinusoidal incremental signals Ua1 and Ua2 are phase-shifted by 90 ° and have signal levels of approximately 1VPP.
The signal peaks from the reference mark signal have a usable component of approximately 0.5 V.
Signal interpolation and digitalisation can be performed by electronics, which output TTL-compatible signals.
Voltage signals can be transmitted to the subsequent electronics unit over cables as long as 50 m, provided that the
specified 5 V ± 5 % supply voltage is maintained at the encoder. Encoders that produce voltage signals have sensor
line connections for detection of the supply voltage at the encoder; corresponding control systems in the subsequent
electronics can then maintain the voltage tolerance.

Designation
1VSS Encoder signals Ua1 , Ua2
SP
Reference pulse Ua0
Signal level HIGH UH
Ua1 0
Signal level LOW UL
Edge separation a
Ua2 0 Phase shift P
Current at signal level HIGH IH
P
Current at signal level LOW IL
Ua0 0 Signal period SP
Delay time td

612 WG20 Gear Units and Geared Motors www.weg.net

Ventilation systems

FL Forced ventilation
ZL Fly wheel fan
ZM Metal fan
U Non-ventilated without NDE shaft end
UW Non-ventilated with NDE shaft end

FL - Forced ventilation (TEFV, IC416)

IEC frame sizes: 63 to 280

At applications with high starting frequencies, startings against heavy masses, heavy alternating load and operations with
frequency inverters, self ventilation of the motor sometimes will not be sufficient and forced ventilation is necessary.
At frequencies under 30 Hz forced ventilation is recommended in order not to thermally overstrain the motor.

Forced ventilation currents (2 pole ventilation motor, 4 pole for frame size 280)
50 Hz 60 Hz
IEC Phases Capacitor Voltage Current Power Air current Noise Voltage Current Power Air current Noise
frame size Connection range capacity level range capacity level
μF V A1) W1) m³/h db(A) V A1) W1) m³/h dB(A)
3~Y - 346-525 0.09 28 380-575 0.08 29
63 3~Δ - 200-303 0.15 28 54 47 220-332 0.14 29 69 52
1~⊥Δ 1.5 230-277 0.18 46 230-277 0.21 54
3~Y - 346-525 0.09 29 380-575 0.07 28
71 3~Δ - 200-303 0.15 29 78 51 220-332 0.13 28 99 56
1~⊥Δ 1.5 230-277 0.18 48 230-277 0.21 56
3~Y - 346-525 0.09 33 380-575 0.07 36
80 3~Δ - 200-303 0.16 33 128 54 220-332 0.13 36 151 58
1~⊥Δ 1.5 230-277 0.19 48 230-277 0.22 59
3~Y - 346-525 0.22 78 380-575 0.18 71
90 3~Δ - 200-303 0.39 78 216 59 220-332 0.32 71 258 63
1~⊥Δ 3.0 220-277 0.29 59 220-277 0.23 61
3~Y - 346-525 0.21 80 380-575 0.18 80
100 3~Δ - 200-303 0.37 80 278 60 220-332 0.30 80 328 65 M
1~⊥Δ 3.0 220-277 0.29 62 220-277 0.28 73
3~Y - 346-525 0.20 87 380-575 0.17 93
112 3~Δ - 200-303 0.35 87 355 62 220-332 0.29 93 418 66
1~⊥Δ 3.0 220-277 0.27 64 220-277 0.36 88
3~Y - 346-525 0.37 160 380-575 0.32 180
132 3~Δ - 200-303 0.64 160 550 67 220-332 0.55 180 650 71
1~⊥Δ 6.0 230-277 0.52 125 230-277 0.61 163
3~Y - 346-525 0.74 314 380-575 0.62 391
160 3~Δ - 200-303 1.28 314 220-332 1.08 391
1~⊥Δ 12 230-277 1.05 246 230-277 1.52 390
3~Y - 346-525 0.74 314 380-575 0.62 391
180 3~Δ - 200-303 1.28 314 220-332 1.08 391
1~⊥Δ 12 230-277 1.05 246 230-277 1.52 390
3~Y - 346-525 0.74 314 380-575 0.62 391
200 3~Δ - 200-303 1.28 314 980 73 220-332 1.08 391 1160 77
1~⊥Δ 12 230-277 1.05 246 230-277 1.52 390
3~Y - 346-525 0.74 314 380-575 0.62 391
225 3~Δ - 200-303 1.28 314 220-332 1.08 391
1~⊥Δ 12 230-277 1.05 246 230-277 1.52 390
3~Y - 346-525 0.74 314 380-575 0.62 391
250 3~Δ - 200-303 1.28 314 220-332 1.08 391
1~⊥Δ 12 230-277 1.05 246 230-277 1.52 390
3~Y - 346-525 0.31 154 1283 62 380-575 0.34 223 1467 66
280
3~Δ - 200-400 0.91 238 1337 63 220-400 0.62 247 1580 67

1) maximum permissible values

www.weg.net WG20 Gear Units and Geared Motors 613

 LB3, LB4 IEC frame size AD □LL
□LL 63 118 107
71 124 107
80 134 107
90 143 107

AD
100 152 107
112 164 107
132 185 107
160 211 107
180 211 107
200 211 107
225 211 107
250 211 107
280 247.5 105

Dimensions in mm. Dimensions LB3 and LB4 see

drawings from page 590
ZL - Fly wheel fan
IEC frame sizes: 71 to 132 (special execution)

Fly wheel fans increase the inertial moment of the standard motors by a multiple and help to decrease the start up time of the
motors. Motors with fly wheel fan often are used at crane drives or machine-systems where a soft start up is required.
Available for motor sizes 71 to 132 on request, exchangeable without modification with standard fan, pay attention to the
reduced starting frequency! Braking by reversal and driving up against a buffer stop is not permissible.

Motor without brake: Jges = Jmot + JZL

Brake motor: Jges = Jmot + JZL + JB JZL m
IEC frame size
[kgm²] x 10 -3 [kg]
Designation Unit 71 2 1.3
Total mass moment of inertia Jges [kgm²] 80 2 1.3
Mass moment of motor Jmot [kgm²] 90 3 1.6
Mass moment of brake JB [kgm²] 100 10 3.3
Mass moment of fly wheel fan JZL [kgm²] 112 10 3.3
Weight of fly wheel fan m [kg] 132 14 3.8

M ZM - Metal fan
IEC frame size: 63 to 280

For ambient temperatures which are lesser than or greater than the operation temperatures of the standard plastic fan wheels,
the ventilation can be provided via metal fan wheels. These can be manufactured from aluminium, steel plate or cast iron.
Using a metal fan can be appropriate in the event of difficult climatic conditions.

U - Non-ventilated without NDE shaft end (TENV)

IEC frame size: 63 to 280

In this version, there is no fan or fan cover. The NDE is completely enclosed. A cover
plate is used as the sealing component. This prevents dirt, water, etc. from entering
the motor.

UW - Non-ventilated with NDE shaft end (TENV)

IEC frame size: 63 to 280

This design is realised by omitting the fan. The standard fan cover is used as contact
protection for the remaining NDE rotating shaft. Motors of these designs are
intended for use in systems where fans or fan covers integrated into the motor are
not appropriate due to the environmental conditions, for design reasons or at the
customer’s request.
The motors are therefore designed without integrated fans or fan covers.

In the non-ventilated version, the resulting reduction in nominal motor output must be
observed!

614 WG20 Gear Units and Geared Motors www.weg.net

Additional modules

HR Hand wheel
SD Protection cap
ID Protection cap for encoders
ZWM Second shaft end - module shaft
ZWV Second shaft end - solid shaft

HR - Hand wheel
IEC frame sizes: 71 to 250

By using a second shaft end it is possible to fit a hand wheel. IEC frame size ØWD WH
71 125 51
80 125 51
WH 90 125 51
100 125 51
112 125 51
132 200 60
Ø WD

160 200 60
180 200 60
200 200 60
225 200 60
250 200 60

Dimensions in mm.

SD - Protection cap
IEC frame sizes: 63 to 280

When installed vertically with the shaft downward, e.g. IM V1, the air intake opening can be protected against water and foreign
substance by means of a protective cap.

IEC frame size ØCD CH

CH
63
71
124
139
20
20
M
80 157 20
90 176 20
100 197 32
Ø CD

112 219 35
132 254 35
160 266 52
180 310 57
200 380 67
225 427 72
250 427 72
280 547 93

Dimensions in mm.
ID - Protection cap for encoders
IEC frame sizes: 90 to 280

If mounted outside the fan cover, the encoder may be protected against foreign matter and other external influence by a
separate protection cap.

Protection cap for CD CH

CH
IG
74 116
standard encoder

IV
CD

Heavy Duty 115 183

encoder

Dimensions in mm.

www.weg.net WG20 Gear Units and Geared Motors 615

 ZW. - Second shaft end

Motors with or without brake can be supplied with a second free shaft end.

ZWM: Module shaft

IEC frame sizes: 71 to 280. This shaft end can be used to transfer half the rated output of the motor.

ZWV: Solid shaft

IEC frame sizes: 63 to 200. Available on request.

ED EA

FA

GC
DA

IEC frame size DA DZ 2) EA ED FA DZ

GC Tolerances
63 1) 11 M4 23 - 4 12.5 Dimension name ISO tolerance DIN EN ISO 286-2
71 14 M5 30 5 5 16 ≤ Ø 30 mm j6
DA
80 14 M5 30 5 5 16 > Ø 30 mm up to Ø 50 mm k6
90 19 M6 40 5 6 21.5
100 24 M8 50 5 8 27
112 24 M8 50 5 8 27
132 28 M10 60 5 8 31
160 38 M12 80 5 10 41
180 38 M12 80 5 10 41
200 38 M12 80 5 10 41
225 2) 38 M12 80 5 10 41

M 250 2)
280 2)
38
38
M12
M12
80
80
5
5
10
10
41
41

Dimensions in mm. 1) ZWV only 2) ZWM only 3) centre hole with thread according to DIN 332-1

Standards
The motors comply with the competent standards and specifications, especially with the following:

Title IEC DIN / EN / VDE

Rotating electrical machines IEC 60034-1
DIN EN 60034-1
Rating and performance IEC 60085

Standard methods for determining losses and efficiency from tests

IEC 60034-2-1 DIN EN 60034-2-1
(excluding machines for traction vehicles)

Degrees of protection provided by integral design of rotating electrical machines (IP Code) IEC 60034-5 DIN EN 60034-5

Methods of cooling (IC Code) IEC 60034-6 DIN EN 60034-6

Classification of types of construction, mounting arrangements and terminal box position (IM Code) IEC 60034-7 DIN EN 60034-7

Terminal markings and direction of rotation IEC 60034-8 DIN EN 60034-8

Noise limits IEC 60034-9 DIN EN 60034-9

Starting performance of single-speed three-phase cage induction motors IEC 60034-12 DIN EN 60034-12

Mechanical vibration of certain machines with shaft heights 56 mm and higher -

IEC 60034-14 DIN EN 60034-14
measurement, evaluation and limits of vibration severity

Dimensions and output series for rotating electrical machines IEC 60072-1 DIN EN 50347

Thermal protection IEC 60034-11 DIN EN 60034-11

CENELEC standard voltages IEC 60038 DIN EN 60038

616 WG20 Gear Units and Geared Motors www.weg.net

Notes

www.weg.net WG20 Gear Units and Geared Motors 617

M

618 WG20 Gear Units and Geared Motors www.weg.net

 Industry is always on the move. And WEG doesn’t
stop evolving. Thinking on this, we developed
WEGmotion Drives, an integrated and flexible M
package that combines motors, drives, gears and
digital solutions to improve productivity of your
manufacturing plant. Do you know what that
means? It means reliability, better control of
machines and equipment, more intelligence in
operational processes and more efficiency for your
industry. It is WEG’s partnership getting you ready
today for tomorrow’s challenge.

www.weg.net WG20 Gear Units and Geared Motors 619

 The scope of solutions of the WEG Group
is not limited to the products and solutions
presented in this brochure.
Please contact us
to learn more about our entire portfolio.

For our worldwide

operations visit our websites

www.weg.net
www.weg-gears.net

+43 (0)2633 404-0

[email protected]

WEG Gear Systems GmbH

Wöllersdorfer Strasse 68 - 2753 Markt Piesting
Austria

Cod: 50076915 | Rev: 07 | Date (m/y): 09/2024.

The values shown are subject to change without prior notice.