PROCEEDING

2016 2nd International Conference of Industrial, Mechanical,

Electrical, and Chemical Engineering
(ICIMECE)
October 6 - 7, 2016
Yogyakarta, Indonesia

IEEE Catalog Number : CFP16PAE-ART

ISBN 978-1-5090-4161-9
Abstracting is permitted with credit to the source. For copying, reprint or
republication, write to 2016 2nd International Conference of Industrial,
Mechanical, Electrical, and Chemical Engineering (ICIMECE) Secretariat at
Faculty of Engineering, Sebelas Maret University. All right reserved.
Copyright ©2016 by 2016 2nd International Conference of Industrial,
Mechanical, Electrical, and Chemical Engineering (ICIMECE), Sebelas Maret
University
IEEE Catalog Number : CFP16PAE-ART
ISBN 978-1-5090-4161-9
 Welcome Message
On behalf Organizing, Steering, and
Technical Program Committee, it is my privilege
to welcome you to the Joint International
Conference of The Second Industrial, Mechanical,
Electrical, and Chemical Engineering & Industrial
and System Engineering (ICIMECE & ACISE
2016).
The ICIMECE & ACISE 2016 organized
by Faculty of Enigeering - Sebelas Maret
University in collaboration with Faculty of
Enigeering - Diponegoro University, and the
School of Electrical and Informatics, Institute
Technology Bandung (ITB), and the Institute of
Electrical and Electronics Engineers (IEEE) with
technical co-sponsored by the Indonesia Section C
Chapter and Indonesia Section SP/ED/E/PES Joint
Chapter.
The first ICIMECE (formerly known as IMECE) was held in 2015 while
the first ACISE was held in 2014 as a domestic conference. This year, these two
conferences are joined together to be broad, widely provide opportunities for the
different areas to exchange new ideas and also experiences, as well as to establish
business or research relations and to find global partnership for future
collaboration in the fields of Engineering. The conference is expected to be an
effective platform for the three axis of triple helix namely ABG (Academic
Business Government) forum, to share ideas and to present the works of
scientists, engineers, educators and students. Speakers from Australia, Indonesia,
Japan, Malaysia, South Korea, the Republic of the Philippines, the United
Kingdom, The People's Republic of China and Turkey were submitted articles to
this conference.
In closing, It was our great honor and pleasure to accept the
responsibilities and challenges of Conference General Chair. We hope that the
conference will be stimulating, informative, enjoyable and fulfilling experience
for all who attend it.
 Organization and Committees
Conference Advisers:
1. Agus Purwanto (Sebelas Maret University);
2. Dwi Hendratmo W (Bandung Institute of Technology);
3. Budiyono (Diponegoro University).
Steering Committee:
1. (Sebelas Maret University);
2. M. Agung Wibowo (Diponegoro University);
3. Dwi Aries Himawanto (Sebelas Maret University);
4. Kuncoro Diharjo (Sebelas Maret University);
5. Sulistyo Saputra (Sebelas Maret University);
6. Susy Susmartini (Sebelas Maret University);
7. Muhammad Nizam (Sebelas Maret University);
8. Margono (Sebelas Maret University);
9. Syamsul Hadi (Sebelas Maret University);
10. Eko Pujiyanto (Sebelas Maret University);
11. Augustinus Sujono (Sebelas Maret University).
Program Chair:
Wahyudi Sutopo (Sebelas Maret University)
Co-Chairs:
1. Umar Khayam (Bandung Institute of Technology);
2. Naniek Utami Handayani (Diponegoro University)
Technical Program:
1. Muh. Hisjam (Sebelas Maret University);
2. Wakhid Ahmad Jauhari (Sebelas Maret University);
3. Burhanuddin Halimi (Sebelas Maret University);
4. Diyah Dwi Nugraheni (Sebelas Maret University);
 5. Susatyo Nugroho W. P. (Diponegoro University).
General Secretaries:
1. Pringgo Widyo Laksono (Sebelas Maret University);
2. M. Mujiya Ulkhaq (Diponegoro University).
Treasuries:
1. Rina W. Astuti (Sebelas Maret University);
2. Diana Puspita Sari (Diponegoro University).
Conference Programs:
1. Chico Hermanu B. A. (Sebelas Maret University);
2. Taufiq Al-Makmun (Sebelas Maret University);
3. Yusuf Priyandari (Sebelas Maret University);
4. Dyan Ika Rinawati (Diponegoro University).
Logistic:
1. Ilham Priadythama (Sebelas Maret University);
2. Fakharina Fahma (Sebelas Maret University);
3. Rahmaniyah Dwi Astuti (Sebelas Maret University);
4. Yusuf Widharto (Diponegoro University).
Publication and Website:
1. Haryono Setiadi (Sebelas Maret University);
2. Irfan Hilmi Hamdani (Sebelas Maret University);
3. Wiwik Budiawan (Diponegoro University).
International Technical Committee:
1. Agung Tri Wijayanta (Sebelas Maret University, Indonesia)
2. Agus Purwanto (Sebelas Maret University, Indonesia)
3. Alfadhlani (University of Andalas, Indonesia)
4. Anugerah Widiyanto (PPT, Indonesia)
5. Arfan Bakhtiar (Diponegoro University, Indonesia)
6. Arief Syaichu Rohman (Bandung Institute of Technology, Indonesia)
7. Arien Heryansyah (University of Technology, Malaysia)
8. Aries Susanty (Diponegoro University, Indonesia)
9. Ario Sunar Baskoro (Universty of Indonesia, Indonesia)
10. Azah Mohamed (Universiti Kebangsaan Malaysia, Malaysia)
11. Bambang Purwanggono (Diponegoro University, Indonesia)
12. Bambang Suhardi (Sebelas Maret University, Indonesia)
13. Budi Santosa (Sebelas Maret University, Indonesia)
14. Cucuk Nur Rosyidi (Sebelas Maret University, Indonesia)
15. D. Danardono (Sebelas Maret University, Indonesia)
16. Danardono Agus Sumarsono (University of Indonesia, Indonesia)
17. Dida Diah Damayanti (Telkom University, Indonesia)
18. Dina Sonalaila (Southampton University, United Kingdom)
19. Dwi Aries Himawanto (Sebelas Maret University, Indonesia)
20. Eka Firmansyah (Gadjah Mada University, Indonesia)
21. Eko Pujiyanto (Sebelas Maret University, Indonesia
22. Eko Supriyanto (University of Technology, Malaysia)
23. Emir Mauludi Husni (Bandung Institute of Technology, Indonesia)
24. Evizal (University of Technology, Malaysia)
25. Hennie Husniah (University of Langlangbuana, Indonesia)
26. Hery Suliantoro (Diponegoro University, Indonesia)
27. Hilwadi Hindersah (Bandung Institute of Technology, Indonesia)
28. Ida Ayu (University of Technology, Malaysia)
29. Inayati (Sebelas Maret University, Indonesia)
30. Indrawanto (Bandung Institute of Technology, Indonesia)
31. Isao Nakajima (Tokai University, Japan)
32. Jayan Sentanuhadi (Gadjah Mada University, Indonesia)
33. Jupriyanto (PT. Indo Pacific Communication and Defense, Indonesia)
34. Ken Ferens (Univsersity of Manitoba, Canada)
35. Kuncoro Diharjo (Sebelas Maret University, Indonesia)
36. Kuncoro Harto Widodo (Gadjah Mada University, Indonesia)
37. Nur Yuniarto (Sepuluh Nopember Institute of Technology, Indonesia)
38. Mahfudz Al-Huda (BPPT, Indonesia)
39. Muhammad Nur (Sepuluh Nopember Institute of Technology, Indonesia)
40. Muhammad Reza (ABB, Sweden)
41. Mukmin Widyanto A. (Bandung Institute of Technology, Indonesia)
42. Mustofa (Sekolah Tinggi Manajemen Industri, Indonesia)
43. Naniek Utami Handayani (Diponegoro University, Indonesia)
44. Novie Susanto (Diponegoro University, Indonesia)
45. Pekik Argo Dahono (Bandung Institute of Technology, Indonesia)
46. Pranoto Hidaya Rusmin (Bandung Institute of Technology, Indonesia)
47. Ratna Purwaningsih (Diponegoro University, Indonesia)
48. Rini Dharmastiti (Universitas Gadjah Mada, Indonesia)
49. Singgih Saptadi (Diponegoro University, Indonesia)
50. Stefanus Eko (Sepuluh Nopember Institute of Technology, Indonesia)
51. Sunu Herwi Pranolo (Sebelas Maret University, Indonesia)
52. Susy Susmartini (Sebelas Maret University,Indonesia)
53. Suyitno (Sebelas Maret University, Indonesia)
54. Tanika Dewi Sofianti (Swiss German University, Indonesia)
55. Triyono (Sebelas Maret University, Indonesia)
56. Jonrinaldi (Andalas University, Indonesia)
CONTENTS

Electrical Engineering I
6A1-1 Efficiency of Energy Consumption on ZRP and AODV by applying A-1
Sensor-MAC
6A1-2 X-Band Antenna Design for Indonesian Ground Surveillance Man Pack A-6
Radar
6A1-3 Crossroads traffic density monitoring and injection mitigation through A-9
visual recognition
6A1-4 Piezoelectric Transformer with Pulse Dropping Technique for High A-15
Voltage Generation
6A1-5 Influence of manufacturing process on Soft-Magnetic Properties of Iron A-19
Powder

Supply Chain and Business

6B1-1 Investigating Total Cost and Service Level of Parts with Different Booking B-1
Type Using Continuous Review Method
6B1-2 A Periodic Review Model for Vendor-Buyer System with Inspection B-5
Errors and Adjusted Production Rate
6B1-3 A Closed-Loop Supply Chain Model for Supplier-Manufacturer-Retailer B-10
System with Rework and Waste Disposal
6B1-4 Q Inventory Model with Product Expiry And Product Return On B-16
Pharmaceutical Products At Hospital Kardinah
6B1-5 Pre-Test Market Results of Commercializing New Technologies: A Case B-21
Study of Eco-Absorber
6B1-6 A Concept of Economics Value for Cost of Natural Resource B-29

Mechanical and Chemical Process

6C1-1 Fabrication and Integration of PDMS-Glass Based Microfluidic with C-1
Optical
Absorbance Measurement Device for Coliform Bacteria Detection
6C1-2 Biocomposite of Super Absorbent Polymer (SAP) from Rice Straw- C-7
Polyacrylamida (PAM) and Corncob-Polyacrylamida (PAM): Synthesis
and Characterization
6C1-3 Mass Transfer Study on the Microwave Heating of Cured Vanilla Pods C-10
Extraction by applying Isolated Rumen Liquid of Cellulase
6C1-4 A Study on The Adsorption Equilibrium and Kinetics of Methylene Blue C-14
onto Orange Peel Wastes as Biosorbents
6C1-5 Effect of internal resistance mismatch on performance of battery pack C-18
LiFePO4
6C1-6 Overcut and Material Removal Rate on Electrochemical Machining of C-24
Alumunium and Stainless Steel using Isolated Brass Electrode

Electrical Engineering II
6A2-1 Design of Experiments to Parameter Setting in a Genetic Algorithm for D-1
Optimal Power Flow with TCSC Device
6A2-2 System of Wavelet Transform on Partial Discharge Signal Denoising D-7
6A2-3 Design of Hilbert Antenna as Partial Discharge Sensor D-12
6A2-4 Overtaking assistant system (OAS) with fuzzy logic method using camera D-17
sensor
6A2-5 Electromyography (EMG) Signal Recognition Using Combined Discrete D-23
Wavelet Transform Based on Artificial Neural Network (ANN)

Decision Making
6B2-1 Performance Criteria Development of Maintenance Service Provider Using E-1
Case Study Approach Analysis
6B2-2 Decision Support System of SMB Telkom University Roadshow Location E-8
Prioritization With Weighted Sum Model Method
6B2-3 The Evaluation of Criteria and Subcriteria of Research Project Selection E-13
Using Fuzzy Analytical Hierarchy Process Method
6B2-4 Feasibility Study of Industrial Projects: A Fuzzy AHP Approach E-19
6B2-5 Enhancing Competitiveness of Ready Made Garment Small-Medium E-24
Enterprises through Logistics Performance Measurement Using SCOR
Method

Ergonomics and Product Design I

6C2-1 Using Nasa Task Load Index And Maslach Burnout Inventory For F-1
Evaluating The Subjective Mental And Physical Workload Of Nurse
Central Surgical Installation Hospitals Karanganyar
6C2-2 Applying Deep Fryer And Spinner Experiments for Optimization F-6
Multiresponse Water Content and Fat Content of Oyster Mushroom Chips
Using Taguchi and PCR-TOPSIS Methods
6C2-3 Ergonomic Checkpoints as the Base of Stamping Station Work Facilities F-10
Improvement
6C2-4 Applying Hazard Analysis Critical Control Point (HACCP) for Production F-16
Process of Oyster Mushroom Chips in Small and Medium Enterprise
(SME)
6C2-5 Model Simulations of Noise Pollution due to Departures and Approaches F-21
of Passenger Aircrafts around Achmad Yani Airport Semarang - Indonesia
 Electrical Engineering III
7A1-1 Light Sensor Selection of Wi-MoLS (Wireless Modern Light Sensor) G-1
Based on Analytic Hierarchy Process (AHP)
7A1-2 Performance on Precision Analysis of Mobile Robot Map Making Device G-5
7A1-3 An Analysis of Automatic Balance Evaluator and Rehabilitation G-10
Instrument System Processing
7A1-4 A Hysteresis Current Controller for Grid-Connected Inverter with Reduced G-16
Losses
7A1-5 Comparative analysis Well to wheel fuel economy and emission of G-20
conventional and alternative vehicle in Surakarta, Indonesia
7A1-6 Design, Implementation, and Testing of Partial Discharge Signal G-24
Processing System

Ergonomics and Product Design II

7B1-1 H-1
Based on Performance Task Comparison Result
7B1-2 Evaluation and Designing Street Lighting with Solar Cell: A Case Study H-7
7B1-3 Designing Size of Batik Shirt For Male College Student in Surakarta Using H-13
Anthropometric Data (Case Study: Male College Student of Industrial
Engineering Major in Surakarta)
7B1-4 Analysis of Potential Work Accidents Using Hazard Identification, Risk H-17
Assessment and Risk Control (HIRARC) Method
7B1-5 Review of Intelligent Wheelchair Technology Control Development in the H-22
last 12 Years

Quality and Product Development

7C1-1 Designing Framework for Standardization and Testing Requirements for I-1
the Secondary Battery A Case Study of Lithium-Ion Battery Module in
Electric Vehicle Application
7C1-2 The Standard Development for the National Standard of Indonesian (SNI) I-7
of the Cell Traction Battery Lithium-ion Ferro Phospate Secondarry for
Electric Vehicle Applications
7C1-3 Further Study on a Short Wheel Base Recumbent Bike Frame Using I-13
Simulated Finite Element Analysis
7C1-4 Manual Wheelchair Intervention on Transmition System by Assistive I-19
Technology to Increase User Mobility
7C1-5 Effect of Speedometer Positioning: Distraction and Workload While I-25
Driving
7C1-6 Optimization of PBGA Encapsulation Considering Fluid/Structure I-31
Interaction Using Response Surface Methodology
 Electrical Engineering IV
7A2-1 Wireless Water Flow Monitoring Based On Android Smartphone J-1
7A2-2 Electric Field Optimization on 150 kV GIS Bushing using Functionally J-6
Gradient Material
7A2-3 Electric Field Optimization on 150 kV GIS Spacer using Functionally J-12
Gradient Material
7A2-4 Computer Facial Animation with Synthesize Marker on 3D Faces Surface J-19
7A2-5 Static Analysis of STATCOM Placement Effect on the Voltage Quality J-23
and Available Transfer Capability