SERVICE MANUAL

ORIGINAL MANUAL ISSUE DATE: 1/2016

GN2SK CHASSIS
Segment: QH
Version Date Subject
1.0 1/2016 Original manual issue.

LCD TV

9-888-587-01
MODEL LIST

MODEL COLOR COMMANDER DEST. MODEL COLOR COMMANDER DEST.

XBR-55X850D Black RMF-TX200U (UC2)
US/CND
Silver RMF-TX200U (LA1)
MEXICO
XBR-55X857D Silver RMF-TX200B (CO1)
COLOMBIA

XBR-65X850D Black RMF-TX200U (UC2)

US/CND
(LA1)
MEXICO
XBR-65X855D Black RMF-TX200B (LA8)
CHILE
PERU
VENEZUELA
XBR-65X857D Black RMF-TX200B (CO1)
COLOMBIA

XBR-55X850D/857D, 65X850D/855D/857D 2
WARNINGS AND CAUTIONS - ENGLISH

CAUTION
These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

WARNING!!
An isolation transformer should be used during any service to avoid possible shock hazard, because of live chassis.
The chassis of this receiver is directly connected to the ac power line.

CARRYING THE TV
Be sure to follow these guidelines to protect your property and avoid causing serious injury.
• Carry the TV with an adequate number of people; larger size TVs require two or more people.
• Correct hand placement while carrying the TV is very important for safety and to avoid damages.

SAFETY-RELATED COMPONENT WARNING!!

Components identified by shading and ! mark on the schematic diagrams, exploded views, and in the parts list are critical for safe operation. Replace these components with Sony
parts whose part numbers appear as shown in this manual or in supplements published by Sony. Circuit adjustments that are critical for safe operation are identified in this manual.
Follow these procedures whenever critical components are replaced or improper operation is suspected.

CAUTION ABOUT THE LITHIUM BATTERY

• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
• Outer case broken battery should not contact to water.

XBR-55X850D/857D, 65X850D/855D/857D 3
WARNINGS AND CAUTIONS - FRENCH

ATTENTION!!
Ces instructions de service sont à l’usage du personnel de service qualifi é seulement.
Pour prévenir le risque de choc électrique, ne pas faire l’entretien autre que celui contenu dans le Mode d’emploi à moins que vous soyez qualifi é faire ainsi.

WARNING!!
Afi n d’eviter tout risque d’electrocution provenant d’un chássis sous tension, un transformateur d’isolement doit etre utilisé lors de tout dépannage. Le chássis de ce récepteur est
directement raccordé à l’alimentation du secteur.

POUR TRANSPORTER LE TÉLÉVISEUR

Tenez compte de ce qui suit pendant l’installation du téléviseur :
• Débranchez tous les câbles avant de transporter le téléviseur.
• Transportez le téléviseur avec le nombre de personnes approprié ; un téléviseur de grande taille doit être transporté par au moins deux personnes.
• Lors du transport du téléviseur, l’emplacement des mains est très important pour votre sécurité, ainsi que pour éviter de causer des dommages.

ALERTE!!
Afi n d’eviter tout risque d’electrocution provenant d’un chassis sous tension, un transformateur d’isolement doit etre utilise lors de tout depannage. Le chassis de ce recepteur est
directement raccorde a l’alimentation du secteur.

ATTENTION AUX COMPOSANTS RELATIFS A LA SECURITE!!

Les composants identifi es par une trame et par une marque sur les schemas de principe, les vues explosees et les listes de pieces sont d’une importance critique pour la securite
du fonctionnement. Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par Sony. Les
reglages de circuit dont l’importance est critique pour la securite du fonctionnement sont identifi es dans le present manuel. Suivre ces procedures lors de chaque remplacement de
composants critiques, ou lorsqu’un mauvais fonctionnement suspecte.

XBR-55X850D/857D, 65X850D/855D/857D 4
 WARNINGS AND CAUTIONS

USE CAUTION WHEN HANDLING THE LCD PANEL

When repairing the LCD panel, be sure you are grounded by using a wrist band.
When repairing the LCD panel on the wall, the LCD panel must be secured using the 4 mounting holes on the rear cover.

1) Do not press on the panel or frame edge to avoid the risk of electric shock.
2) Do not scratch or press on the panel with any sharp objects.
3) Do not leave the module in high temperatures or in areas of high humidity for an extended period of time.
4) Do not expose the LCD panel to direct sunlight.
5) Avoid contact with water. It may cause a short circuit within the module.
6) Disconnect the AC power when replacing the backlight (CCFL) or inverter circuit. (High voltage occurs at the inverter circuit at 650Vrms.)
7) Always clean the LCD panel with a soft cloth material.
8) Use care when handling the wires or connectors of the inverter circuit. Damaging the wires may cause a short.
9) Protect the panel from ESD to avoid damaging the electronic circuit (C-MOS).
10) It is recommended not to exceed 1 hour of Power-On nor Burn-in period with LCD panel face down condition, in repair activity.

XBR-55X850D/857D, 65X850D/855D/857D 5
SAFETY CHECK-OUT

After correcting the original service problem, perform the following safety checks before releasing the set to the customer:

1. Check the area of your repair for unsoldered or poorly soldered connections. Check the entire board surface for solder splashes and bridges.

2. Check the interboard wiring to ensure that no wires are “pinched” or touching high-wattage resistors.

3. Check that all control knobs, shields, covers, ground straps, and mounting hardware have been replaced. Be absolutely certain that you have replaced all the insulators.

4. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement.

5. Look for parts which, though functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement.

6. Check the line cords for cracks and abrasion. Recommend the replacement of any such line cord to the customer.

7. Check the antenna terminals, metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below.

8. For safety reasons, repairing the Power board and/or Inverter board is prohibited.

XBR-55X850D/857D, 65X850D/855D/857D 6
 SAFETY CHECK-OUT

Leakage Test
The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed
metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes).
Leakage current can be measured by any one of three methods.

1. A commercial leakage tester, such as the Simpson 229 or RCA WT-540A. Follow the manufacturers’
instructions to use these instructions.
2. A battery-operated AC milliampmeter. The Data Precision 245 digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The
“limit” indication is 0.75 V, so analog meters must have an accurate low voltage scale.
The Simpson’s 250 and Sanwa SH-63TRD are examples of passive VOMs that are suitable. Nearly all
battery-operated digital multimeters that have a 2 VAC range are suitable (see Figure A).

How to Find a Good Earth Ground

A cold-water pipe is a guaranteed earth ground; the cover-plate retaining screw on most AC outlet boxes is also
at earth ground.
If the retaining screw is to be used as your earth ground, verify that it is at ground by measuring the resistance
between it and a cold-water pipe with an ohmmeter. The reading should be zero ohms.
If a cold-water pipe is not accessible, connect a 60- to 100-watt trouble- light (not a neon lamp) between the hot
side of the receptacle and the retaining screw. Try both slots, if necessary, to locate the hot side on the line; the
lamp should light at normal brilliance if the screw is at ground potential (see Figure B).

XBR-55X850D/857D, 65X850D/855D/857D 7
SELF DIAGNOSIS FUNCTION
The units in this manual contain a self-diagnostic function. If an error occurs, the Smart Core Red LED will automatically begin to flash.
The number of times the LED flashes translates to a probable source of the problem.
A definition of the Smart Core Red LED flash indicators is listed in the instruction manual for the user’s knowledge and reference.
If an error symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these
problems occur.

DIAGNOSTIC TEST INDICATORS

When an error occurs, the Smart Core Red LED will flash a set number of times to indicate the possible cause of the problem.
If there is more than one error, the LED will identify the first of the problem areas.
Result for all of the following diagnostic items are displayed on screen.
If the screen displays a “0”, no error has occurred .

<G>: Power supply board, <B>: Main board, <T>: Tcon board, (LD) board,<P>: Panel module,
<S>: Speaker, <A>: Power Adapter, <D>: DPS 4K BE board, <T>: Temperature Board

RED LED blinking count Detection Items

2x <G/B/A> Main 12V over voltage [MAIN_POWER]

<B> Main 5.0V failure [DC_ALERT]

3x
<B/S> Audio amp. protection [AUD_ERR]

4x None

<P/T/G/B> Panel ID EEPROM I2C No ACK (Also panel power failure is a suspect) [P_ID_ERR]
5x
<T> Tcon IC I2C communication error [TCON_ERR]

<G/P/B/LD/D> Backlight failure [BACKLIGHT] or

6x
<LD/P/D> LED driver failure/LED voltage protection

Over temperature protection [TEMP_ERR]

<B/T> Temp. sensor I2C No ACK [TEMP_ERR]
7x
<B/D> V By One lock error between Main device and 4KBE device [4KBE_ERR]
<B>4KBE device UART communication error detection.

8x <B/D> Software error [SW_ERR]

Red italic: detect at startup sequence only.

XBR-55X850D/857D, 65X850D/855D/857D 8
 SELF DIAGNOSIS FUNCTION

[SELF DIAGNOSTIC SCREEN DISPLAY]

For errors with symptoms such as “power sometimes shuts off” or

“screen sometimes goes out” that cannot be confirmed,
Error Naming Error count
it is possible to bring up past occurrences of failure for confirmation on the screen:
In standby mode, press buttons on the remote commander sequentially in rapid
SELF CHECK
succession as shown below:
Back <<
002 MAIN_POWER 000000000000 000000000000 000000000000 000
003 DC_ALERT 000000000000 000000000000 000000000000 000
003 AUD_ERR 150101000018 150101000018 150101000018 003
" These items are 003 HDMI_EQ 150101000123 150101000045 150101000045 003
Format of error timestamps 003 TU_DEMOD 150101000218 150101000223 150101000105 003
YYMMDDhhmmss (in UTC) disabled."
004 LD_ERR 000000000000 000000000000 000000000000 000
Example: 004 BCM_ERR 000000000000 000000000000 000000000000 000
120823132523 -> Aug 23 2012 13:25:23 UTC Smart Core Red LED 005 TCON_ERR 150101000504 000000000000 000000000000 001
* Only when time is set, an error timestamp blinking count 005 P_ID_ERR 000000000000 000000000000 000000000000 000
is saved. 006 BACKLIGHT ERR 000000000000 000000000000 000000000000 000
• Panel Operation Time is recorded every 30 min, 007 TEMP_ERR 150101000200 150101000002 000000000000 002
but Total Operation Time is recorded every 1 hr . 007 4KBE_ERR 000000000000 000000000000 000000000000 000
Therefore, the panel op. time might become larger than the total op. time. 008 SW_ERR 000000000000 000000000000 000000000000 000

Total Operation Time [hr] – Boot Count – Panel Operation Time [hr]

00005 00414 00002

[Home]Exit

Error Error Error

timestamp for timestamp for timestamp for
last recorded second last 3rd last
error recorded error recorded error

Since the diagnostic results displayed on the screen are not automatically cleared,
always check the self-diagnostic screen. After you have completed the repairs, clear the result display to “0”.

Clearing the Self Check Diagnostic List

Panel operation time : Press the Channel 7 => Channel 0 .

To exit the Self Diagnostic screen...

*If you want to finish service mode app, do AC OFF/ON NOTE:
→Service mode app is disable perfectly This model does not have the function to clear the error history of self-diagnostic screen
*if you want to move home menu, push <HOME> button by the operation of “press the Channel 8 => Channel 0”.
→Service mode app do background(not disable perfectly)
XBR-55X850D/857D, 65X850D/855D/857D 9
ADJUSTMENT
HOW TO ENTER SERVICE MODE
1) Turn on the main power switch to place the set in standby mode.
2) Press the buttons on the remote commander as follows, and entering service mode.

3) Service mode display.

Service Mode
Model Information >>
Self diagnosis History >>
Video / Audio >>
Panel / PQ >>
General Setting >>
Tuner >>
Wifi >>

[</>] Set [Home]Exit

4) How to use the remote commander.

Function The flow of control

Service mode on <Display><5><Vol Up><Power>
Service mode off AC plug OFF/Menu*
Item up / down <↑>/ <↓>
Item select left/right <←>/<→>
Execute <OK>

*When finished the operation of service mode , please AC Plug OFF/ON the TV set.
If you don’t do AC plug OFF/ON, remain the Service Mode App and User can see the Service Mode after RC ON.
(Refer the previous page.)
XBR-55X850D/857D, 65X850D/855D/857D 10
 ADJUSTMENT

SOFTWARE VERSION
1) In Service Mode, select “Model Information”, press “Enter” or “→” button to enter Status Information.

Main Micro
Service Mode Model SW Version: PKG2.011.0010NAB
NVM Version: 0001 UC2
Model Information >> Boot Version: V1.000
Self diagnosis History >> Status Information >> PQ Version: 102100006
AQ Version: AQ1.100
Video / Audio >> Model Information >> <Ext>
exFRC: 00.00.00.00
Panel / PQ >> Model Number Setting >> CameraVID: 0
General Setting >> SERIAL NUMBER EDIT >> CameraPIC: 0
CameraFW: 0
Tuner >> 4k BE
MLFW: SF1.002
Wifi >> MAFW: SF0.360
ADSP SF0.501
NDAT SD0.370
PDAT SD0.370
BDAT SD1.011
BCM SD-------
FDAT SD0.002
UDAT SD0.000
[</>] Set [Home]Exit [</>] Set [Home]Exit BDIX SD0.370

2) Press “Enter” or “Return” button to return to Service Mode.

Service Mode
Model Information >>
Self diagnosis History >>
Video / Audio >>
Panel / PQ >>
General Setting >>
Tuner >>
Wifi >>

[</>] Set [Home]Exit

XBR-55X850D/857D, 65X850D/855D/857D 11
 ADJUSTMENT

SERIAL NUMBER EDIT (1)

1) In “Service Mode”, select “Model Information” by pressing “↑” or “↓” then pressing “Enter” or Service Mode
“→” button to enter inside. Model Information >>
Self diagnosis History >>
2) Select “Serial Number Edit” by pressing “↑” or “↓” button then pressing “→” button. Video / Audio >>
Panel / PQ >>
3) Press “↑” or “↓” to input numbers. General Setting >>
Tuner >>
4) After user input data , press <Enter> . Wifi >>

• Pop-up dialog appear to confirm input data correct

• Serial Number can be set ONLY ONCE [</>] Set [Home]Exit

5) Press “→” or “←” button to select YES or NO. Service Mode

Select YES if input data is correct. Status Information >>
Model Information >>
Select NO if input data is incorrect. Model Number Setting >>
Serial Number Edit _ _ _ _ _ _ _
Press <Enter> to save answer.

Service Mode

Status Information >>

Model Information >>
Model Number Setting >>
Serial Number Edit 9 9 9 9 9 9 9

Input Data correct?

Yes No

XBR-55X850D/857D, 65X850D/855D/857D 12
 ADJUSTMENT

SERIAL NUMBER EDIT (2)

If YES is selected, the input data is saved into EEPROM. Service Mode
SERIAL NUMBER EDIT is greyed out and the serial number that has been input is displayed.
Status Information >>
User will not able to edit anymore.
Model Information >>

Model Number Setting >>

Serial Number Edit 9999999

If NO is selected, the input data is not saved into EEPROM. Service Mode
The serial number that has been input is displayed.
Status Information >>
User can still edit the Serial Number.
Model Information >>

Model Number Setting >>

Serial Number Edit 9 9 9 9 9 9 9

Input Data correct?

Yes No

XBR-55X850D/857D, 65X850D/855D/857D 13
 ADJUSTMENT

MODEL NUMBER SETTING

1) In “Service Mode”, select “Model Information” by pressing “↑” or “↓” then pressing “Enter” or “→” button to enter inside.
2) Select “Model Number Setting” by pressing “↑” or “↓” button then pressing “Enter” or “→” button.
3) Press “↑” or “↓” arrow key to scroll Product Name Candidate.
 (e.g. KDL-40X500B CO1,KDL-40X500C BR6)

Service Mode Service Mode

Model Information >>
Status Information >>
Self diagnosis History >>
Model Information >>
Video / Audio >>
Model Number Setting >>
Panel / PQ >>
General Setting >> Serial Number Edit >>
Tuner >>
Wifi >>

[</>] Set [Home]Exit

4) Select one Product Name from the list, press <Enter> will pop dialog to inform user to confirm data. Model dependent settings will be overwritten into EEPROM.

[MODEL_NUMBER_SETTING]

____________

OK

XBR-55X850D/857D, 65X850D/855D/857D 14
 ADJUSTMENT

WB ADJUSTMENT
(Please apply when the Main board or panel is replaced.) c. To change data , press “←” or “→” on remote commander.
In “Panel/PQ” service mode.
a. Go to “WB Adjustment” category by “↑” or “↓”.
Back <<
R WB Gain <[ 0 ]>
Service Mode
Model Information >> G WB Gain <[ 0 ]>
Self diagnosis History >> B WB Gain <[ 0 ]>
Video / Audio >> R WB Offset <[ 0 ]>
Panel / PQ >> G WB Offset <[ 0 ]>
General Setting >> B WB Offset <[ 0 ]>
Tuner >>
Wifi / BT >>
[</>] Set [Home]Exit

b. To select “WB Adjustment”,

[</>]press “→” button.
Set [Home]Exit

XBR-55X850D/857D, 65X850D/855D/857D 15
 ADJUSTMENT

WB/MURA/CUC DATA TRANSFER 2. In “WB/Mura/CUC data transfer”.

(Please apply when the Main board or panel is replaced.) a. Select “WB/Gamma data transfer” by pressing “↑” or “↓” on remote commander.
1. In “Panel/PQ” service mode. b. To change the items, press “←” or “→” on remote commander and press “Enter”
a. Go to “WB/Mura/CUC data transfer” category by “↑” or “↓”. button.
Selectable items are:
Service Mode
Model Information >>
0. SoC to T-con
Self diagnosis History >> 1. T-con to SoC
Video / Audio >>
2. Not action
Panel / PQ >>
General Setting >> c. Select “[start]” and press “Enter” button to start transfer.
Tuner >>
Wifi / BT >>
Back <<
WB/Gamma data transfer <[ 0. SoC to T-con ]>
Mura data transfer <[ 0. SoC to T-con ]>
CUC data transfer <[ 0. SoC to T-con ]>

b. To select “WB/Mura/CUC[</>]
dataSet
transfer”, press “→” button.
[Home]Exit
[Start]
c. To change data , press “←” or “→” on remote commander.

[</>] Set [Home]Exit

*Please refer to another manual “Service Procedure for Panel, Board and Software Change /
Upgrade(P/N:9-888-450-02)” for details.
B-board T-con Panel
replace replace replace

WB/ 1.T-con to 0.SoC to 0.SoC to

Gamma Soc T-con T-con

1.T-con to 0.SoC to 1.T-con

Mura
Soc T-con to Soc

1.T-con to 0.SoC to 1.T-con

CUC
Soc T-con to Soc

XBR-55X850D/857D, 65X850D/855D/857D 16
 ADJUSTMENT

HDD PERFORMANCE CHECK

1. In “Service Mode”, select “General Setting” by pressing “↑” or “↓” then
3. A message "Please wait ..." is displayed during performance check processing.
pressing “Enter” or “→” button to enter inside.

Service Mode Service Mode

Model Information >>
Self diagnosis History >>
Video / Audio >> Please wait…
Panel / PQ >>
General Setting >>
Tuner >>
Wifi / BT >>

2. Select “HDD Performance[</>]

checkSet”[Home]Exit
by pressing “↑” or “↓” then pressing
“Enter” or “→” button to enter inside.
4. Result OK or NG will be displayed after performance of HDD is checked.

General Setting

Back << HDD Performance

HDD Performace Check
Check
Aging mode <[On/Off]>
Result <[ NG ]>
HDD Performance Check >>
>>
Back <<
AAA
Update CI+ Credentials >>
Boot count reset >>
ECS Enable <[On/Off]>

[</>] Set [Home]Exit

XBR-55X850D/857D, 65X850D/855D/857D 17
 ADJUSTMENT

HDD RE-REGISTRATION
1) In “Service Mode”, select “General Setting” by pressing “↑” or “↓” then pressing “Enter” or “→” button to enter inside.
2) Select “AAA” by pressing “↑” or “↓” then pressing “Enter” or “→” button to enter inside.

Service Mode General Setting

Model Information >>
Back <<
Self diagnosis History >>
Video / Audio >>
Aging mode <[On/Off]>
Panel / PQ >> HDD Performance Check >>
General Setting >> AAA >>
Tuner >> Update CI+ Credentials >>
Wifi / BT >> Boot count reset >>
ECS Enable <[On/Off]>

[</>] Set [Home]Exit [</>] Set [Home]Exit

3) Result OK or NG will be displayed after HDD re-registration is succeed/failed.

HDD Re-Register

Result <[ NG ]>

Back <<

XBR-55X850D/857D, 65X850D/855D/857D 18
USB UPDATE

1:Download USB image and unzip file.

2: copy unzip file to USB memory root folder.

3: USB memory insert TV.

4:USB image is newer soft version. 4:USB image is not newer soft version.
Automatically show message and start update. Automatically show message and start update.
Please follow directions. Please follow directions.

System software update

Copying USB update file. Please wait… 46%

Preparing for system software update. During the system software update, the TV will automatically restart.
Please do not remove the USB device until an update complete message is displayed . The update may take up to
30 minutes to complete.

System software update OK

System software update
OK
The system software update is complete . Your software is up to date
Some user settings may have changed during the update. Please remove the USB device and select [OK] to exit
Please remove the USB device and select ”OK” to exit

5: finished 5: finished

XBR-55X850D/857D, 65X850D/855D/857D 19
TROUBLE SHOOTING
TRIAGE
1. Confirm the symptom from the customer.
2. Select that symptom from the chart.
3. Bring all the boards and cables listed for that symptom.
4. Follow the troubleshooting charts in the technical guides to isolate the board.
5. Chart Color Code.

RED DOT: Most likely defective part

BLUE TRIANGLE: Secondary possible defective part
BLACK TEXT: Board that may correct the symptom

Symptoms - Shutdown. Power LED No Video Bluetooth

Power Remote Network Audio Skype Smart Core
blinking red diagnostics sequences - missing or distorted (BT)

Reference Stationary Bluetooth / One

No White Power LED & No video
colored No video Wireless Skype Smart Core no LED Step Remote
2 3 4 5 6 7 8 9 10 does not response to
lines or
One of
all Inputs
No Remote
can't connect
No Audio
Can't Work (Set is still alive) (OSR) can't
remote (Dead Set) Inputs
dots connect

B* Board p l p p p l l p p l l p p l p p p

G* Board/ADP l p p p l l p

H* Board p l l

Speaker p l

Wifi & BT
l p l
Module

LD* Board l p l p l l p p

V By One FFC p p p

Tcon l p p

LCD Panel p l l l p

Temp Board l

Panel Panel Soft-

Power LD (Communication) (Backlight) TEMP ware

Problem
Audio 4KBE

XBR-55X850D/857D, 65X850D/855D/857D 20
 TROUBLE SHOOTING

FLOW
1-1. NO POWER

with G* board with AC-ADP

No Power No Power

Check STBY 3.3V Check 19.5V

NG Replace NG NG Replace NG LD Board
C9006 C9001
Between G* Board to G* Board Between LD Board to or
near CN9000 near CN9000
B* Board Harness B* Board Harness AC Adaptor
on B* board on B* board
OK OK
OK OK
Harness Harness

B* Board B* Board

u-Com Failure u-Com Failure

DDCON/LDO DDCON/LDO

Main Device Failure Main Device Failure

XBR-55X850D/857D, 65X850D/855D/857D 21
 TROUBLE SHOOTING

FLOW
1-2-1. NO POWER U-COM FAILURE

START

Check MAIN_VCC no
no Check 12.5V Line
Check C9117 Voltage. Check +3.3V_STBY R9175 Voltage.
(G board, LD or IC9007).
Is the voltage >3.0V? C9006, CN9000 #24pin Is the voltage >1.6V?

yes
yes

no Check P_ON_VBUS no
Check C9129 Voltage. Check DC_OFF_DET IC9017 #pin11 Change IC9017
Is the voltage >3.0V? IC9000 is >3.0V?

yes
yes

Check OPWRSB no SOC no

Check P_ON_#1
R9179 Voltage. Muffin
IC9017 #pin13 Change IC9017
Is the voltage 0V? problem
is >3.0V?

yes
yes
Try AC Off and On after few minutes.
Check POWER_ON no Check PGOOD_1 no
If #pin19 keep Low, change IC9017. 1-3 No POWER - DDCON/LDO
IC9017 #pin19 R9173 Voltage.
If #pin19 goes High few seconds and downs to Low, Check 1.0V DDCON (IC9008)
Is the voltage >3.0V? Is the voltage >3.0V?
Check 12.5V Line (G board, LD or IC9007).
yes
yes
Check P_ON_LNB no Continue next page…
IC9017 #pin15 Change IC9017
Is the voltage >3.0V?

yes

XBR-55X850D/857D, 65X850D/855D/857D 22
 TROUBLE SHOOTING

FLOW
1-2-1. NO POWER U-COM FAILURE 1-2-2. NO POWER DC_OFF_DET CHECK

from the previous page

START

Check P_ON_#2 Check DC_OFF_DET no

no END
IC9017 #pin14 Change IC9017 R9035
( IC9000 is working OK )
Is the voltage >3.0V? Is voltage < 3V?

yes yes

Check ORESETB Check Vdd no

no C9024 Change IC9000
IC9017 #pin12 Change IC9017
Is the voltage >3.0V? Is voltage < 5V?

yes yes

END
Check X_SYSTEM_RST no ( IC9000 is working OK )
IC9017 #pin16 Change IC9017
Is the voltage >3.0V?

yes
If PANEL_PWER_ON
(R9172) is 0V no
Check XRST Change IC9017
IC9017 #pin17
Is the voltage >3.0V?
yes

If BL_MUTE
(R9090) is 0V no
Check BL_ON Change IC9017
IC9017 #pin18
Is the voltage >3.0V?
yes

END
( IC9017 is working OK )

XBR-55X850D/857D, 65X850D/855D/857D 23
 TROUBLE SHOOTING

FLOW
1-3. NO POWER DDCON/LDO

DDCONs check
START

Check fuse no
F9xxx Change Fuse
Is fuse OK?

yes

Check Vcc voltage no

Check POWER_ON IC9017 #pin19
C9xxx
Is voltage >12.0V? (Refer 1-2 No Power U-Com Failure)

yes

Check Enable pin no 1-2 No Power U-Com Failure

voltage or
Is voltage >2.5V? Enable source

yes

Change DDCON IC

XBR-55X850D/857D, 65X850D/855D/857D 24
 TROUBLE SHOOTING

FLOW
1-3. NO POWER DDCON/LDO

DDCON check
START

Check IC9001
Vcc voltage
no Check Vcc voltage no Check no
C9061 D9000 Change D9000
C9033
Is voltage >3V? Is diode ?
Is voltage >12V?
yes yes yes Check +3.3V_STBY.
G board or IC9003
Check Vcc voltage no
C9061 Check no
Is voltage >4V? D9001 Change D9001
Is diode ?
yes
yes
no Check +5V_MAIN DDCON (IC9001)
Is IC9010 mounted?

yes

Check Enable no
IC9010 #pin1 Change IC9010
Is voltage >2.5V?

yes
Change DDCON
IC9009

XBR-55X850D/857D, 65X850D/855D/857D 25
 TROUBLE SHOOTING

FLOW
1-3. NO POWER DDCON/LDO

LDOs check
START

yes

Check Vcc voltage no Check +3.3V_DDC_OUT

C9xxx
Is voltage >3V? DDCON (IC9003)

yes

Check Enable pin no

voltage 1-2 No Power U-Com Failure
Is voltage >3V?

yes

Change LDO IC

XBR-55X850D/857D, 65X850D/855D/857D 26
 TROUBLE SHOOTING

FLOW
2-1. LED BLINKING 2X (MAIN POWER ERROR)

with AC-ADP
with G* board other models

2-time blinking 2-time blinking

Check +12V_REG Check +12V_REG

at pin 11/13 of on B Board Yes at pin 11/13 of on B Board Yes
(CN9000 BMFW2), (CN9000 BMFW2),
Voltage > 13.2V ? Voltage > 13.2V ?

No No

BMFW2 Board G* Board BMFW2 Board LD* Board

XBR-55X850D/857D, 65X850D/855D/857D 27
 TROUBLE SHOOTING

FLOW
2-2. LED BLINKING 3X 2-3. LED BLINKING 4X (LED VOLTAGE ERROR)

DC_ALERT AUDIO ERROR

LED 3x blinking LED 3x blinking 4-time blinking

Check +5.0V_VBUS NG No
IC9014,etc
at pin1 in IC8001, 4.959V Audio Error ? See other flow Check
(B* Board) Between 0.898V to 2.997V
<Voltage<5.285V? BMFW2: CN9000 21Pin
BM1: CN7704 29Pin
OK Yes on the B* Board

Go to
Under0.897V or less
Audio check point 3-3 Power Off Checking
Go to Audio Error
B* Board

Go to
3-4 Power On Checking
LED driver or G* board/Adapter

 Change LD board or G* board/Adapter.

Replace B Board

Finish

XBR-55X850D/857D, 65X850D/855D/857D 28
 TROUBLE SHOOTING

FLOW
2-4. LED BLINKING 5X (PANEL COMMUNICATION ERROR)

5-times blinking

NG
Change Change
B-Board Panel (or T-con)
Check NG OK
“+12.5V_TCON” at G-Board is
Replace G-Board
CN9000 #4 (or C9011) suspicious Symptom Symptom
on the B-Board improvement improvement
NG
OK B-Board is Panel (or T-Con) is
suspicious suspicious
Symptom
Replace the Harness improve
Harness is
Between G-Board
suspicious
and B-Board

NG
Symptom
improve
Replace V-By-One FFC
the V-By-One FFC is suspicious

NG

XBR-55X850D/857D, 65X850D/855D/857D 29
 TROUBLE SHOOTING

FLOW
2-5. LED BLINKING 6X (BACKLIGHT ERROR)

6-times blinking

Harness /
Connection Symptom
Check Voltage of Voltage ≥ 1.85 V Check broken Improvement
BL_ERR_DET Change
harness/connection Harness
on 21pin of CN9000 harness
G/LD* board to B*Board
on BMFW2
No
improvement
Harness /
Connection OK
Voltage < 1.85 V
Symptom
Improvement
LED driver or G board
LD board/G board
Change LD board or G board
No
improvement Symptom
Improvement
Change Change
BMFW2 Board Panel
BMFW2 Panel
Symptom No
Improvement improvement

XBR-55X850D/857D, 65X850D/855D/857D 30
 TROUBLE SHOOTING

FLOW
2-6. LED BLINKING 7X (TEMPERATURE ERROR)

7-time blinking

Setting
circumstance is OK? No Set to another
Temperature, location, etc.
Ventilation, etc.

Yes

No
Change B* Board, improvement
and Aging a few Panel
hours

Symptom
improvement

Check I2C_C bus Yes Temp sensor

B* Board NG communication OK?
IC1400
(IC1400 #1,#6)

No

I2C_C bus dumping or

Muffin check

XBR-55X850D/857D, 65X850D/855D/857D 31
 TROUBLE SHOOTING

FLOW
3-1. NO SOUND

No Sound
Without LED 3x

No sound only Yes Go to

Analog RF and Digital RF ? 3-6 No Sound Tuner
Select [External Inputs]
AV receiver is connected Yes
[BRAVIA Sync Settings]
to HDMI in ? No
[BRAVIA Sync Control] [off]

No Yes Go to
No sound only HDMI ?
3-7 No Sound HDMI

Yes No
[Speakers] setting is Change the setting to
[Audio System] ? [TV Speakers]
Go to
3-2 No Sound Audio
No

Headphone is connected to Yes

Disconnect the Headphone
HP/Audio Out terminal ?

No

[Sound] Change [Sound]

No
[Headphone Speaker Link] [Headphone Speaker Link]
setting is [On] ? Yes to [Off], OK ?

No Yes

Go to Replace B Board
3-3 Power Off Checking HP/Audio out terminal or Headphone detect
GPIO may be broken

XBR-55X850D/857D, 65X850D/855D/857D 32
 TROUBLE SHOOTING

FLOW
3-2. NO SOUND (AUDIO) 3-3. NO SOUND (POWER OFF CHECK)

No Sound Power Off Check Power Off Check

Audio From 2-2 From 3-1

Measure the Speaker

(1) B / DPS Board Yes Yes
impedance by multi-meter Replace Speaker
PVDD-GND short ?
Less than 3Ω ?

Replace B Board
No No

Confirm the speaker

(2) B / DPS Board Yes Yes
harness
LDO out short ? Replace Speaker Harness
Cut or shorted
to the chassis ?

No
No
Finish
(3) B / DPS Board Yes Return to 2-2 or 3-1
Fuse broken ?

No

Replace B Board

BMFW2 Board DPS Board

(1) PVDD-GND short check (1) PVDD-GND short check
Measure impedance between PVDD and GND at Measure impedance between PVDD and GND at
capacitor C7881. capacitor C7932, C7914.
If impedance is <100Ω NG If impedance is <100Ω NG
(2) LDO out short check (2) LDO out short check
Measure impedance between +3.3V and GND at C7880. Measure impedance between +3.3V and GND at C7913,
If impedance is <100Ω NG C7931.
If impedance is <100Ω NG

(3) Fuse open check (3) Fuse open check

Measure impedance of fuse Measure impedance of fuse
F7702 5A (12.5V or 19.5V) F7700, F7701 5A (12.5V or 19.5V)
If fuse open NG If fuse open NG

XBR-55X850D/857D, 65X850D/855D/857D 33
 TROUBLE SHOOTING

FLOW
3-4. NO SOUND (POWER ON CHECK)

Power On Check
From 2-2

(4) POWER_AU check

Yes
POWER_AU is supplied to
B / DPS Board for
Noa moment
before LED 3x blinking ?

No

Yes
Replace G Board
OK ? BMFW2 Board
(4) POWER_AU check
Measure voltage between PVDD and GND at capacitor
No C7881.
Voltage rise more than 0V for a moment at power on Yes

DPS Board
(4) POWER_AU check
Return to 2-2 Finish Measure voltage between PVDD and GND at capacitor
C7932, C7914.
Voltage rise more than 0V for a moment at power on Yes

XBR-55X850D/857D, 65X850D/855D/857D 34
 TROUBLE SHOOTING

FLOW
3-5. NO SOUND (AUDIO HP/AUDIO OUT)

No Sound Audio
HP/Audio out

[Sound] [Headphone] Yes

Headphone Volume
[Headphone/Audio out] Increase Headphone Volume
is set to MIN?
is set to ?

No
Replace B Board

[Audio Out (Fixed)]

Replace B Board

[Audio Out (Variable)] Yes

Volume
Increase Volume
is set to MIN?

No
Replace B Board

[Subwoofer] Set [Headphone/Audio Out]

to [Headphone] or [Audio Out]

XBR-55X850D/857D, 65X850D/855D/857D 35
 TROUBLE SHOOTING

FLOW
3-6. NO SOUND (TUNER)

This troubleshooting is only for Analog

No Sound with normal picture

NO
Only RF tuner input?

YES

Please refer Audio

Check IC1000 (SOC)
troubleshooting

XBR-55X850D/857D, 65X850D/855D/857D 36
 TROUBLE SHOOTING

FLOW
3-7. NO SOUND (HDMI1/2/3/4)

No Sound

NG
Check the picture Refer to 4-5 HDMI NO PICTURE

OK
DVI Does this model have YES
Check the mode Connect Stereo mini-jack cable between Source and the TV, and
Analog Audio In
of Source equipment Change “HDMI/DVI Audio Source” to Auto or Analog Audio In.
(Stereo mini-jack)?

HDMI NO
Change the mode of Source equipment to HDMI

Analog Audio In
Does this model have YES
“HDMI/DVI Audio Source”
Analog Audio In Change “HDMI/DVI Audio Source” to Auto or HDMI Audio In
setting is?
(Stereo mini-jack)?
NO Auto or HDMI Audio

OK
Check Sound by other TV set
which is same model Refer to 3-2 No Sound Audio

NG

NO Check Source equipment OK

Change B-Board.
Is Distributor used ? by Reference TV set
And inform the designer of it
(For example, RB2, RB1)
YES
NG
Connect Source
equipment directly Check the settings of
Source equipment

XBR-55X850D/857D, 65X850D/855D/857D 37
 TROUBLE SHOOTING

FLOW
4-1. NO PICTURE

No Picture BL_ON (L or H): IC9017 #18pin (for 4K BMFW2/BM1 board)

BL_ON : H
No Check Smart Core No Check Replace NG NG
Got Any Normal Replace LCD Panel
Behavior BL_ON the V by One FFC
Display? the main Board (or T-CON)
(5x Blinking) on the main board Harness

Yes BL_ON : L Symptom Symptom

Yes
improvement improvement

Check Other 5x Blinking Backlight V by One FFC

Main board NG
Portion: Harness

Ext. Video Input -

No Picture

HDMI - No Picture

Tuner - No Picture

XBR-55X850D/857D, 65X850D/855D/857D 38
 TROUBLE SHOOTING

FLOW
4-2. NO PICTURE (VIDEO)

(1) CH/MX/BR/PA/COL/LA

No Picture Video

Video 1 Video 2
No Picture No Picture

* Check J7505 NG * Check J7504

Check if input OSD NG Check if input OSD
Connection, NG (Vpp: 0 V) Connection, NG (Vpp: 0 V)
is GREY OUT is GREY OUT
VIDEO2_DET VIDEO_DET
OK if it is highlighted OK if it is highlighted
At R7562 At R7539
OK OK (Vpp: 3.3 V) OK OK (Vpp: 3.3 V)

** Detailed check all NG (Vpp: 0 V) ** Detailed check all NG (Vpp: 0 V)

parts at VIDEO2_DET
parts at VIDEO_DET
Signal Path [R7561]
Signal Path [R7535]
OK (Vpp: 3.3 V)
OK (Vpp: 3.3 V)

NG (Vpp: 0 V) ** Detailed check all parts

NG NG (Vpp: 0 V)
Check wave between at CVBS2P signal path Check wave between ** Detailed check all parts NG
C7511 and IC1000 [D7514/R721/C7521/ at CVBS3P signal path
C7512 and IC1000
R7519/C7534] [D7530/R7524/R7525]
OK (Vpp: 1 V) OK
OK (Vpp: 1 V) OK

Muffin [IC1000] J7505 Connector J7505 Connectivity Muffin [IC1000] J7504 Connector J7504 Connectivity
Problem Problem Problem Parts Broken Parts Broken
Problem Problem Problem

*  OK Condition : No solder splash can be seen **  OK Condition : No part short-circuited

 NG Condition : Solder splash can be seen  NG Condition : Part short-circuited

XBR-55X850D/857D, 65X850D/855D/857D 39
 TROUBLE SHOOTING

FLOW
4-2. NO PICTURE (VIDEO)

(2) UC/HK/TW

No Picture

Video1 Video2
No Picture No Picture

Check if input OSD NG * Check J7501 NG * Check J7504

NG (Vpp: 0 V) Check if input OSD NG (Vpp: 0 V)
Connection, Connection,
is GREY OUT is GREY OUT
VIDEO2_DET VIDEO_DET
OK if it is highlighted OK if it is highlighted
At R7537 At R7539
OK OK (Vpp: 3.3 V) OK OK (Vpp: 3.3 V)

** Detailed check all NG (Vpp: 0 V) ** Detailed check all NG (Vpp: 0 V)

parts at VIDEO2_DET
parts at VIDEO_DET
Signal Path [R7556]
Signal Path [R7535]
OK (Vpp: 3.3 V)
OK (Vpp: 3.3 V)

NG (Vpp: 0 V) ** Detailed check all parts

NG
Check wave between at CVBS2P signal path Check wave between
NG (Vpp: 0 V) ** Detailed check all parts NG
C7511 and IC1000 [D7505/R7559/ at CVBS3P signal path
C7512 and IC1000
C7511etc] [D7530/R7524/R7525]
OK (Vpp: 1 V) OK OK (Vpp: 1 V) OK

Muffin [IC1000] J7501 Connector J7501 Connectivity Muffin [IC1000] J7504 Connector J7504 Connectivity
Parts Broken Parts Broken
Problem Problem Problem Problem Problem Problem

*  OK Condition : No solder splash can be seen **  OK Condition : No part short-circuited

 NG Condition : Solder splash can be seen  NG Condition : Part short-circuited

XBR-55X850D/857D, 65X850D/855D/857D 40
 TROUBLE SHOOTING

FLOW
4-3. NO PICTURE (COMPONENT)

(1) CH/MX/BR/PA/COL/LA

No Picture Video

Component
No Picture

Check if input OSD NG * Check J7504 Con

VIDEO_DET at NG (Vpp: 0 V)
is GREY OUT
R7539,
OK if it is highlighted
CR_DET at R7538
OK
OK (Vpp: 3.3 V)

** Detailed check all parts

at VIDEO_DET signal NG (Vpp: 0 V)
Path [R7535] and CR_DET
signal path [R7534]

OK (Vpp: 3.3 V)

** Detailed check all parts

at signal path of:
Check wave NG (Vpp: 0 V) Y1P : [D7530/R7524/C7514/ NG
Between R7527]
C7515/C7518/C7520 PB1P : [VD7508/R7529/C7517/
and IC1000 R7530]
PR1P : [VD7509/R7532/C7519/
OK (Vpp: 1 V) R7553]

OK

Muffin [IC1000] J7504 Connector J7504 Connectivity

Problem Parts Broken
Problem Problem

*  OK Condition : No solder splash can be seen **  OK Condition : No part short-circuited

 NG Condition : Solder splash can be seen  NG Condition : Part short-circuited

XBR-55X850D/857D, 65X850D/855D/857D 41
 TROUBLE SHOOTING

FLOW
4-3. NO PICTURE (COMPONENT)

(2) UC/HK/TW

No Picture

Component
No Picture

Check if input OSD NG * Check J7504 Con

VIDEO_DET at NG (Vpp: 0 V)
is GREY OUT
R7539,
OK if it is highlighted
CR_DET at R7538
OK
OK (Vpp: 3.3 V)

** Detailed check all parts NG (Vpp: 0 V)

at VIDEO_DET signal
Path [R7535] and CR_DET
signal path [R7534]

OK (Vpp: 3.3 V)

** Detailed check all parts

at signal path of:
Check wave Y1P : [D7530/R7524/C7514/ NG
Between NG (Vpp: 0 V)
R7527]
C7515/C7518/C7520 PB1P : [VD7508/R7529/C7517/
and IC1000 R7530]
OK (Vpp: 1 V) PR1P : [VD7509/R7532/C7519/
R7553]

OK

Muffin [IC1000] J7504 Connector J7504 Connectivity

Parts Broken
Problem Problem Problem

*  OK Condition : No solder splash can be seen **  OK Condition : No part short-circuited

 NG Condition : Solder splash can be seen  NG Condition : Part short-circuited

XBR-55X850D/857D, 65X850D/855D/857D 42
 TROUBLE SHOOTING

FLOW
4-4. NO PICTURE (@ TUNER)

RF input no picture / noisy picture

Check RF source cable NG

Change RF cable and antenna
and antenna, OK?

OK

Check Tuner power line:

3.3V at JL6005 = 3.3V?
1.8V at JL6006 = 1.8V? NG
Please refer DDCON
DEM_3.3V at JL6019 = 3.3V? troubleshooting
A_RESET value at JL6012 = 3.3V?
For JP_SK only – TU1.1 V (Refer notes)
OK
Check part mounting condition
YES for “I2C_A_SDA, I2C_A_SCL NG Note:
All broadcasting channel Change NG parts I2C line for all tuners except Japan_SKP
or
cannot be received? connected to I2C bus - Parts for I2C_A_SDA line: R6001, C6004.
I2C_D_SDA, I2C_D_SCL” - Parts for I2C_A_SCL line: R6002, C6005.
Refer Note I2C
NO I2C line for Japan_SKP
OK - Parts for I2C_D_SDA line: R6003,C6006
- Parts for I2C_D_SCL line: R6004,C6007

TU_1.1V line only in Japan_SKP Tuner

Digital - Parts for TU_1.1V: FB6800

Satellite
NG
Check Tuner power line 12V LNB Voltage
Terrestrial/Cable
Analog 12V at JL6027 = 12V? Checking
OK

For TW & NA-ATSC All tuners except

(MX/UC) only TW & NA-ATSC(MX/UC)

Refer Analog Tuning Refer Digital Tuning 1 Refer Digital Tuning 2

XBR-55X850D/857D, 65X850D/855D/857D 43
 TROUBLE SHOOTING

FLOW
4-4. NO PICTURE (@ TUNER)

FOR ANALOG TUNING: @ All destination except JP

For LA-ISDB(BR/AR), LA-T2(COL) and TW only Note:

Analog Tuning - Parts for IFOUT_N line: R6007, FB6002, C6008, R6327, C6301, R6301.
- Parts for IFOUT_P line: R6008, FB6003, C6009, R6326, C6300, R6300.
For Other destination - Parts for IFAGC line: R6072, R6009, R6010, R6069, C6302, R6303.
NG
Confirm ANT or Cable connection A
OK A : Insert correct signal in correct terminal.

Check part mounting condition NG

for analog control line Change NG parts
“IFOUT_N, IFOUT_P, IFAGC”

OK

Check IC1000(SOC)

XBR-55X850D/857D, 65X850D/855D/857D 44
 TROUBLE SHOOTING

FLOW
4-4. NO PICTURE (@ TUNER)

FOR DIGITAL TUNING 1: @ TW, NA-ATSC(MX/UC), JP_SKP and LA-T2(COL)

Digital Tuning 1

For TW only
Note:
- Parts for IFOUT_N line: R6007, FB6002, C6008, R6327, C6301, R6301.
- Parts for IFOUT_P line: R6008, FB6003, C6009, R6326, C6300, R6300.
NG - Parts for IFAGC line: R6072, R6009, R6010, R6069, C6302, R6303.
For all tuners except TW
Confirm ANT or Cable connection A

A : Insert correct signal in correct terminal.

OK
Sound is normal?

No sound
Check IC1000 (SoC)

Check part mounting condition for digital data line OK

“IFOUT_N, IFOUT_P, IFAGC”

NG

Change NG Check SOC(IC1000) and

parts Tuner module

XBR-55X850D/857D, 65X850D/855D/857D 45
 TROUBLE SHOOTING

FLOW
4-4. NO PICTURE (@ TUNER)

FOR DIGITAL TUNING 2: @ AEP_W, JP_SKP, PA_T2, CH/HK, LA-ISDB(BR/AR) and LA-T2(COL)

Digital Tuning 2
For LA-ISDB(BR) and
LA-T2(COL) only
For AEP-W For JP_SKP
For PA_T2 and NG
NG NG
CH/HK only
Confirm ANT or Cable connection A Confirm ANT or Satellite connection A Confirm ANT or Satellite connection A

OK OK
OK
BS/CS or SKP_Opticast/
Digital cable/ Terrestrial
Terrestrial All except SKP_Opticast SKP_Premium or terrestrial

Cable SKP_Opticast
OK
Sound is normal?
Refer to Digital Tuning 1 Refer to Digital Tuning 1
No sound
Check IC1000 (SoC) Note:
On Service - Parts for TU1_TS_DATA0 line: R6015, R6321.
mode display CASE B - Parts for TU1_TS_CLK line: R6016, R6322.
TS_LOCK ? - Parts for TU1_TS_VALID line: R6017, R6323.
UEC ? - Parts for TU1_TS_SYNC line: R6018, R6324.
- CASE A : TS _LOCK = LOCK and UEC constant
CASE A - CASE B : TS _LOCK = UNLOCK or UEC is increasing
Change Tuner module
(Refer to Note tuner )
Check part mounting condition for digital data line Note Tuner –
“TU1_TS_DATA0, TU1_TS_CLK, OK (IC reference -- destination)
TU1_TS_VALID, TU1_TS_SYNC” TU6001 - PA-T2
TU6001 - LA-T2/LA-ISDB
TU6001 - CH, HK
NG TU6003 - AEP_W
Check IC1000 (SoC) TU6802 - JP_SKP

Change NG parts
A : Insert correct signal in correct terminal.

XBR-55X850D/857D, 65X850D/855D/857D 46
 TROUBLE SHOOTING

FLOW
4-5. NO PICTURE (HDMI)

(1) HDMI1

No Picture

Check the below point at

Connector side All lines are NG
Other Input is OK
Check other - Check +5V line Replace
HDMI input - Check HPD line CN5201 NG
- Check DDC lines
All Inputs are NG Voltage NG - Check TMDS lines
Check voltage Spec:2.7~3.6V
Replace
a Pin104 of IC5212 IC5212(HDMI EQ) Only +5V line +5V line is OK Only TMDS lines
is NG and HPD line are NG
Voltage OK
Spec:4.7~5.3V is NG
Other TV set OK Replace
Check Picture by other TV set Spec:2.4~5.3V
IC1000 Replace
which is same model RB5227,RB5228,RB5243,RB5244 RB5231,RB5232
RB5235,RB5236,RB5241,RB5242 RB5209,RB5210
Target board & other
NG
TV set both NG Replace Only DDC lines
YES R5515 are NG
Connect Source
Is Distributor used ?
equipment directly Replace IC5212
NO (HDMI EQ)

Check Source equipment Reference TV Set OK

by Reference TV set Change B-Board.
(For example, RB1) And inform the designer of it

Reference TV set
NG
Check the settings of Replace IC5212 (HDMI EQ).
Source equipment And inform the designer of it

XBR-55X850D/857D, 65X850D/855D/857D 47
 TROUBLE SHOOTING

FLOW
4-5. NO PICTURE (HDMI)

(2) HDMI2

No Picture

Check the below point at

Connector side All lines are NG
Other Input is OK
Check other - Check +5V line Replace
HDMI input - Check HPD line CN5202 NG
- Check DDC lines
All Inputs are NG Voltage NG - Check TMDS lines
Check voltage Spec:2.7~3.6V
Replace
a Pin104 of IC5212 Only TMDS lines
IC5212(HDMI EQ) Only +5V line +5V line is OK are NG
Voltage OK is NG and HPD line
Replace Spec:4.7~5.3V is NG
Check Picture by other TV set Other TV set OK IC1000 Spec:2.4~5.3V
Replace
which is same model RB5227,RB5228,RB5243,RB5244 RB5229,RB5230
RB5235,RB5236,RB5241,RB5242 RB5211,RB5212
Target board & other
TV set both NG Replace Only DDC lines NG
YES R5517 are NG
Connect Source
Is Distributor used ?
equipment directly Replace IC5212
NO (HDMI EQ)

Check Source equipment Reference TV Set OK

by Reference TV set Change B-Board.
(For example, RB1) And inform the designer of it

Reference TV set
NG
Check the settings of Replace IC5212 (HDMI EQ)
Source equipment And inform the designer of it

XBR-55X850D/857D, 65X850D/855D/857D 48
 TROUBLE SHOOTING

FLOW
4-5. NO PICTURE (HDMI)

(3) HDMI3

No Picture

Check the below point at

Connector side All lines are NG
Other Input is OK
Check other - Check +5V line Replace
HDMI input - Check HPD line CN5203
- Check DDC lines NG
All Inputs are NG
Voltage NG - Check TMDS lines
Check voltage Spec:2.7~3.6V Replace
a Pin104 of IC5212 IC5212(HDMI EQ) Only +5V line +5V line is OK Only TMDS lines
is NG and HPD line are NG
Voltage OK
Spec:4.7~5.3V is NG
Other TV set OK Replace Spec:2.4~5.3V
Check Picture by other TV set IC1000 Replace
which is same model RB5227,RB5228,RB5243,RB5244 RB5237,RB5238
RB5235,RB5236,RB5241,RB5242 RB5213,RB5214
Target board & other NG
TV set both NG Replace Only DDC lines
YES R5428 are NG
Connect Source
Is Distributor used ?
equipment directly Replace IC5212
NO (HDMI EQ)

Check Source equipment Reference TV Set OK

by Reference TV set Change B-Board.
(For example, RB1) And inform the designer of it

Reference TV set
NG
Check the settings of Replace IC5212 (HDMI EQ).
Source equipment And inform the designer of it

XBR-55X850D/857D, 65X850D/855D/857D 49
 TROUBLE SHOOTING

FLOW
4-5. NO PICTURE (HDMI)

(4) HDMI4

No Picture

Check the below point at

Connector side All lines are NG
Other Input is OK
Check other - Check +5V line Replace
HDMI input - Check HPD line CN5208 NG
- Check DDC lines
All Inputs are NG Voltage NG - Check TMDS lines
Check voltage Spec:2.7~3.6V Replace
a Pin104 of IC5212 IC5212(HDMI EQ) Only TMDS lines
Only +5V line +5V line is OK are NG
Voltage OK is NG and HPD line
Spec:4.7~5.3V is NG
Other TV set OK Replace
Check Picture by other TV set Spec:2.4~5.3V
IC1000 Replace
which is same model RB5227,RB5228,RB5243,RB5244 RB5239,RB5240
RB5235,RB5236,RB5241,RB5242 RB5215,RB5216
Target board & other
TV set both NG NG
Replace Only DDC lines
YES R5467
Connect Source are NG
Is Distributor used ?
equipment directly
Replace IC5212
NO (HDMI EQ)
Check Source equipment Reference TV Set OK
by Reference TV set Change B-Board.
(For example, RB1) And inform the designer of it

Reference TV set
NG

Check the settings of Replace IC5212 (HDMI EQ).

Source equipment And inform the designer of it

XBR-55X850D/857D, 65X850D/855D/857D 50
 TROUBLE SHOOTING

FLOW
5. KEY SWITCH BUTTONS ERROR

Check harness connection OK

Side key buttons error between B-board and Harness connection issue
switch module

NG

Change harness between OK

B-board to switch module
B-board to switch module
harness issue
harness

NG
OK
Change switch module Switch module issue

NG

NG
Resistor value Check resistor value on B-
Parts issue
[BMFW2/BM1] board
R1089 : 0 [ohm]
R1086 : 47k [ohm] OK In case that power key error
R1432 : 4.7k [ohm]
* R1089 may be not mounted

NG
Check resistor value on B-
board
Resistor value
[BMFW2/BM1] In case that buttons error except power key
R1042 : 4.7k [ohm] OK
R1091 : 0 [ohm]
R1087 : 20k [ohm] Main device issue
R1088 : 22k [ohm] Change B-board
* R1091 may be not mounted

XBR-55X850D/857D, 65X850D/855D/857D 51
 TROUBLE SHOOTING

FLOW
6. IR REMOTE COMMANDER ERROR

Center white LED blinks

OK Battery of remote commander
IR remote commander does not when pushing buttons of
could be weak.
respond remote commander at close
Change battery.
to IR sensor.
NG

Check harness connection OK

Harness connection
between B-board and
issue
SmartCore

NG
OK
Change harness between B- B-board to SmartCore harness
board to SmartCore harness issue

NG

OK
Change SmartCore SmartCore issue

Resistor value NG
[BMFW2/BM1]
R1080 : 0 [ohm] NG
Check resistor value on B-
R1502 : 47k [ohm] Parts issue
* R1080 may be not mounted board

[BFM/BM2]
OK
R1110 : 0 [ohm]
R1259 : 47k [ohm]
* R1110 may be not mounted Change B-board
Main device issue

XBR-55X850D/857D, 65X850D/855D/857D 52
 TROUBLE SHOOTING

FLOW
7. LIGHT SENSOR ERROR

Backlight level does not Check UI setting and Setting is “ON” Check harness OK Battery of remote commander
change when ambient light make sure light sensor connection between B- could be weak.
changed setting is “ON” board and SmartCore Change battery.

NG
Setting is “OFF”
Check harness OK Harness connection
connection between B-
Setting issue issue
board and H-board
Change setting to “ON”
NG
Change harness OK B-board to SmartCore harness
between B-board to
issue
SmartCore harness
NG

OK
Change SmartCore SmartCore issue

Resistor value
NG
[BMFW2/BM1]
R1079 : 0 [ohm] Check resistor value on NG
R1090 : 150k [ohm] Parts issue
B-board
* R1079 may be not mounted

[BFM/BM2] OK
R1029 : 0 [ohm]
R1109 : 0 [ohm] Change B-board
R1052 : 150k [ohm] Main device issue
* R1029, R1109 may be not mounted

XBR-55X850D/857D, 65X850D/855D/857D 53
 TROUBLE SHOOTING

FLOW
8. NETWORK MALFUNCTION

(1) Ethernet (Wired)

[Network Set-up]
>[Wired Set-up]
on the TV

OK OK OK
Connection Results Connection Results Connection Results
B board
Cable Connection Local Access Internet Access

Failed Failed Failed

OK Auto Check Proxy setting

B board Wired Set-up
Check cable Local router
CN8003 IP address setting
DHCP server
NG Manual

Ethernet Cable Check IP address

&
Local router setting

B Board
CHK1 CHK2 CHK3 CHK4

Any scratches NO Check Ethernet OK Check OK OK

Check CMF
along Connector pins Pulse Transformer IC1000 problem.
Soldering
TX+/-, RX+/- Soldering soldering Change B-board
L8000
lines? CN8003 T8001,T8002

YES NG NG NG

Change
Change B-board Change Pulse Trans Change CMF
Ethernet Connector

XBR-55X850D/857D, 65X850D/855D/857D 54
 TROUBLE SHOOTING

FLOW
8. NETWORK MALFUNCTION

(2) Internal Wireless Network malfunction

Wireless Network
Is the radio field No
on the TV
Strength too weak Bxx Board
or even No signal?

Yes
Error Message appear No
when the Wireless NG
Network is selected?
Change WiFi module Access Point

Yes OK

Hardware defect suspected. WiFi module

Check harness NG OK
connection is OK Connect properly Loose harness
between WiFi and Bxx

OK
NG

NG Change harness NG
Change between Bxx board Change Bxx board
Wi-Fi module and WiFi

OK OK

If Wi-Fi malfunction happens,

• Wi-Fi module
• Harness between WiFi and Bxx
Wi-Fi module Main Harness • Bxx board
are suspected.

XBR-55X850D/857D, 65X850D/855D/857D 55
 TROUBLE SHOOTING

FLOW
9. BLUETOOTH MALFUNCTION

Touch pad Remote doesn’t work

Or
3D-glasses (Active) doesn’t work
Or
Bluetooth Speaker/Headphone/Headset doesn’t work

Please refer
OK OK Touch pad Remote manual
Home > Settings > Check BT antenna 3D-glasses (Active) manual
Bluetooth Settings Connection is OK Or
Can read
Near discoverable Bluetooth Speaker/Headphone/Headset operation manual
NG NG NG
else Bluetooth Device

OK Loose BT antenna
Connect properly connection

Check harness NG OK
connection is OK Connect properly Loose harness
between BT and Bxx

OK NG

NG Change harness NG
Change BT module Between Bxx board Change Bxx board
and BT
OK OK

BT module Main Harness

XBR-55X850D/857D, 65X850D/855D/857D 56
 TROUBLE SHOOTING

PCB PARTS MAP

BMFW2 (A side view)
cam012

8
1
cam10036 D9004
cam9 TP3111 59 58 57 56 55 54 49 48 47 46 45 44 2 30
cam5
31 2 30 32 60 53 50 43
R9213 C9153 C9011

DM
7 6 8 7 IC9018
CN1002 cam011 CN3601 51 CN3600 42 R9211 R9209
CN1001 51 1 41 1
61 52 R9212 R9210

5
5 1
DM001 R9208
1 29
cam005 CN1003 R9214 CN9000
1 29 C9155

15x9
C9154
CL1008
CL1007 cam904 CL3627
CL3625
CL3623 CL3620
CL3621 CL3617
CL3618 CL3614cam025
CL3616CL3615
5 1 cam032 CL3635
CL3633
CL3631
CL3629
cam034 9 6 R3653 CL3628
CL3626 CL3622
CL3624 CL3659
CL3619
RB1000 CL1003 C1071 CL3640CL3638
CL3636 CL3632 CL3630 RB3607 RB3606 RB3605 RB3604 RB3603 RB3602 RB3601 RB3600 C3685 C3684 CL3654
C7910 R1075 CL1004 R1091 C1068 C1062 R1089 R1079 CL3643 C3688
C3687C3686R3630 R3672 C3683 C3682
R3627
C1064 C1072
C1073
C1056 D1001R1080 C1074 R3652 CL3637
CL3641CL3639
CL3642 C3693
C3692 cam013
D1003 C1067 C1061 D1002 C1076
C1075 C1077
C1078 R3685
R3684 cam024 C9009 TP3108 cam003
C1070 cam26
cam042 R1076 R3695 R3693
R3694 C3701
R1128 C1065 CL1005
CL1006
VD1000 R1109 R1107 VD1002
VD1001 R3716
C3699
C3698
C3713 R3703
R3704 R3702
C3694
C3712 R3701 R3636 R3631 R3632
R3635 R3674R3673
R3705 R3629 R3633
R3628 R3634
R3671 R3670
RB1001 R1174 R1090 R1081
R1082
R1083
R1084
R1085 C3704 C3700
R3691 C9003 C9005 C9001 C9115 R9109 C9023
R1127 R1129 R1087
R1078
R1077 R1086 C1057 CL3610 CL3660
CL3655 R9022 R9021 R9019
C9014 C9007 R9017 C9021
R9018 C9022 R9016
R9013 R9012
R9009 R9007
R9006 R9004 C9421
R1088 C1055 R3689R3688 C3696C3695 C9013
IRM001 CL7502 R7574 C1066 C3697
R7582 C7547 R7579
R7584
C7551
D7534
R7577C7549
R3645
C3702
R3641 R3690
R3642 C9017 R9075 Q9004
VD7535 R1105 C1083 R1126 C1079
R1062
CL1010
CL3608
CL3607 R3683R3682 L9400
C9405
C9407
R3692 R3647CL3609 R3687 C9020 C9018
C9015
C9016
R1108 R1106 R1073 C1082 CL1011 R3638
R3639 C9006
4 1
cam10042 C9403
VD7534 CL3612 CL3611R3640 R3686
R9076

ON
CL3606
R3646 R9061R9063R9073R9074 C9406
D7533 cam217 R3644 R3643 L9001 R9077 VD9000R9078
C9096 9
S3602 IC9400
C9157 R3626 R3625 R3637 R3649 R3648 C9401
KA001 cam178 C7548 C9164 D3601D3600 L9000 C9404 5 8
R9156 R9166 R9023
R7576 R9180 R9168R9194 C9161
3 1

IC1400 R9179C9117 C9128

C9130 R9178 C9093 C9094 C9092 C9095 Q9005 D9400
4 6
Q3601 Q3600 R3714 R3715 C9402 C9400
R7572 R9154 R9163 C9163 R3651
R3650
C7911 R9155 C9019 R9111R9112R9113
R9400R9401

20
CL9000

1
CL7505 C7550 C9129 C9162 Q9001 Q9002 Q9003 C9408 R9422 F9400
C1441 R9164 CL9003 C9090 17 12
R9404 R9405
C9423R9423
R9407
R9424
R7578 R9165 R9161
CL9004
18 11

R7528
R1512 R1513 CL7503 C9127
R9177 R9026 R9029R9030 IC9003
C9038
C9035 R9079R9080 R9406 C9422
IC9017 C9091 R9402R9403
cam212 C7546 R9103R9102R9101R9100R9099 R9028 C9030 C9027 C9026 C9025
cam211 R1516 C7544 R9157 C9165
R9167 CM9001
C9089
6

6
1

23 7
C9126
R9176 R9025 Q9000 cam010
IC1406 IC1407 1 6
R7583 R9066 R9051cam179 D9002 R9046
R9169 R9065
R9062
3

3
4

R1446
R1448 R1447
R1449 D7535 R7581 C9062 R9104R9105R9108R9107R9106 R9110 R9039

10
R9064

11
C9123 F9005 R9034
R1514 R1515 R9060 R9129 C9069 L9009 R9036 C9056 cam804
CL8345 CL8346 C7542 C9158 R9037R9049
R9054
R9173 R9170
R9215 C9024 C9041
R9050 R9055 F9000
C1462
C9125R9159
6 1
C9070 C9448C9420 C9409 1
ET035 R3331
C9122R9172
R9175
4 1
VD7532 7 23
D9003 R3327

2
3
R9090 Q9022 C9068 C9109 C9113 C9112 C9111 C9110 C9114 IC9000 R9413
cam087 cam091 R8396
C8338 R3326
R3330
IC3103
R9174 Q9023 IC9008 R8395R8394
C8337 CM3102
CM3103
R3335
R3334 R3332

1
R9035
5 8

23

18
R9153 C9124 C9047 C9048 C9049 C9050 C8336C8332
C8334 R3328
R3333

17
1
C7909 C9065 R9412
11 18
R9162 C9116
C9051 cam062 1
ET036 C8335 R8336 R8339 C8333
R8334 CL8343
CL8342 R3329
R1173 R9091 12 17
L9401 cam035 R8338R8337 CL8337
CL8336
C9159 IC9401 CL8717
CL8716 R8333
R8335 R3336
CL9005 C8360 R9171
18

R1136 R9409 C3152

17

12
cam019

6
17 12
R9024 L9010 C1037C1035
1

VD7530 cam171 R8399 CL8715

11
7
R1006
18 11
R9410
C7540 R1007 C9088 C9086 C9085 C9081 C9075 C9106 C9104C9103 C9102 C9101 C9100 C9099 C9098 C9097
R1137 C9451 R3159 R3613CL3605
R1038 IC9007 R9411
C9419
2

R1037 R9408 C9410 C3146 R3174 C3142 R3168 CL3112

VD7533 R1039 R9421 C3653 C3650
C3654 C3649 C3646 C3637 C3634
C3641 C3638
C3645 C3642 C3633 C3630
C3629 C3626
C3625
R1471 C8358C8359
C1415 C9108 23 7
C3110 R3121 C3145 R3173 CL8339 R3601 CM9400
R1138 R1470 C1039 L9004 1 6
C9414 C8301
VD7531 C7543 C9107 C9411 R9420 C3112 R3112 C3119 R3123
R1433C1411
C1428 CL5220 R1142
R5486 TP3109 R9094 R9093 F9001 C3655 C3652
R3160 C3656 C3647 C3644
C3651 C3648 C3639 C3636
C3643 C3640 C3635 C3632
C3631 C3628
C3627
C7541 C3108 R3111 C3601 R3004
CM3001
D7536 R1503 R1122
C1041 R9084R9085R9086R9087R9088R9089 R9092 R9096 R9095 C9105 C9415 R9419 C3117R3314 R3199
R1139 C1433 R8701 R9097 CL9002 C9412 C3114 R3122 R3113 R3600 R3177 CL3003
C3401 C8302 R8302
R1040 R1111
C1026 cam578 R9098 R9418
C7545R7520 R8379
R1432 R8380 C1001
R8392 R3158 R3124 CL8329
R1460 R1015 C9416 C3030
CN1400 C3122 C3123 CL8335 RB3412 RB3411
R1140 CL1401 R1427 R1019 R1016C1030 C9413
R9417 R3602 CL3601 CL3600 C3201 R8324
C8323
C7908 R1401 R1400 R3675 CL8334 C8303 C8300
R7533 C1034 C9417 R9434 C9435 C3027

3
CL7504 C1414C1400 R9416
C1416 C1419 C9046 C9045 IC9404

2
R1017 R1102 CL3602 R3603 CL8330
CL8332CL8326 RB3410 RB3409 RB3408
C1417

1
6
R1141 VD7503 R1420 R1500 R1499 R1438 C1004 R9038 cam079 R9045 C9433 R9415 R3612
R1425 R1018 C9418 R3681 C9434 cam089 CL8323CL8338 CL8333
CL8331 CL8327
CL8328 R8300
R8301 R8389 RB3405 RB3404
CL8341 R1021 C1000

6
1
R1419 R1439 C1407 R1118 F9401 C3657
R9043 IC9004 R3403

5
R1510 D7508 R1506 C1002 R9414 R3180 CL3603 CL8324 CL8319

4
R1434 R1020 C3150 R9436
C1461 R1130 R9044 CL8322CL8317
CL8320 RB3403 RB3402 RB3401
R7502 CL9006 R8378 CL8340
R1131C1017 C8357 C3001 C3005 CL8321CL8311 C3448 C3449 C3447 C3446C3445 R3411C3457
C3458
R3409 R3410C3444
C1424 R1450
C1410 X3600
R7503 C9160 C1021 R3005 C3603 CL8315CL8310
CL8316
R1045 C1029 C3006 C3004
2

CL9009 R8703
R8725 R8704
R8726 C7795 R7741 R7740 C3000 C3028C3022CL3004 C3658 CL8314
C7501 C3614 C3602 C3607 C3617 RB3400 RB3407
1

R1042
R1417
R1421 CL1014 C3011
VD7500 R1043 D8700 D8701 C3016 C3018 C3612 C3616 C3605 C3620 R3611 R3620
C7500
R7501 C3007 R3615 C3443
C3714 C7796 R7743 R7742 FL3000 CL3000 C3017 C3025 C3606 C3619 C3604 C3624 R3617
cam020 R7500
R8377 R3711 C3012 C3026 C3608 C3610 C3615 C3609 C3450 C3508 RB3406
CN7501 R7557 C3021
J7501 J7504 R1412 R1465 C1024 C8356 IC36003
6 4
C3202 C3207
C7907 R7556 R7537 CL9008 R1117 R3706 1 R3707
CM3600
R3708 C3029 C3023 C3623 C3613 C3611
R1413 R1464 R1463 R1034
C7794 R7739 R7738 C3622 C3125 C3205 C3203
VD7509 CM3601
R3710
R3709 C3031 IC3401
C1408 C1436 R1462 C1020 R3713 R3712 R7727 C3034 C3036 C3402 C3204 TP3102
C1412 C1434
R1116
R1033 cam213 CL7767 R7855CL7714 C3032 C3035 C3618 C3127 C3403 C3407
VD7502 D7532 C3033
R8702 CL7765 C7793 R7737 R7736 C3020
6

CL1403
CL1402 C1016 R3696
R3618 C3002 C3008 C3404 C3206
D7502 C1432
C1430 R7854CL7713 CL3414
TP3101 R7531 R3622 S3600 C7791 R7733 R7732 C7797 FL3001 C3015 CL3407
R1454
R1453 R1032 R7726 C3003 C3010 C3405

ON
R3607
4

R1063 R1445
R1444 R1115 R3614 C3600 CL3412
R7505 R7532 R1452
R1451 C3009 C3406 CL8312
R3604 CL7766 C7792 R7735 R7734 R7745 R7744 C3621 CL8313 cam061
R7506 C7519 CL1002 R3697 R3609 R7731 R7730 CL7761
R1125 R3623 S3601 CL3415
CN1403 C7503 R3619 R3608 C7879 CL7760

ON
C1431 C1043 C3062 C3063 C3456 C3455 C3459R3413 C3452 C3451
R7585 R1030 R3616 R3605 CL7770 C3454C3453
R8713 CL7759
R3606 R3412
R7534
R7538 C1009
R1113 R2403 C2655 FL2602 C2659 FL2603 C2654 CL8714 CL7758
C1012 C3460
C1422CL9001 R1031 C2223 S8700 CL8713 CL7757
1

R2404 FL2601

ON
C7906 C2635 CL8702 CL7756 C3680
VD7501D7501 R7509 R1430
R1459 R1114 R8716 C3430 C3431 C3429 C3428C3427 C3440
R3404 R3405C3426
R3406C3439
5

cam218 R7856CL7715
R7863CL7722 R8720 C3068
C3067 C3679
C2434 C2665 R8714 CL8712 R7861CL7720 C8744 C8739
C8742
C8743
VD7504 R7510 C2640 C2638 C2407 C3069
C3066
S3107 R8724 R8715 CL8703 R7862CL7721 CL8718
C1032
C1028 C2401 R2402 R7860CL7719

ON
D7504 C7506 C2411 C2639 R8705 R8706 R7859CL7718 C8708
C1453 CL8704 R7858CL7717 CL3403 C3425
C7913 R7512 C1019 R1036
C2637 R3309 R7857CL7716 C8709 C8738
C8745 C8734
C8736 C8733
C8732 C3044 C3037
C3038 C3043 C3661
C3070 C3662 C3664
C3663C3665
C3666 C3261
cam058 C1444 C1454 R1035 C2406 R3312 R3313 C8710 C3059 C3053
C3056 CL3413
C7912 R1112 R2405 R8707 R8708 CL8705 R3308 C3041
C3046C3047 C3040
C3042 C3039C3676
C3045 C3678C3677
C3671 C3672
C3673 C3669 C3266
C3670 C3432
20

F7702 R1026 C2426

C2663 C3057 CL3406
R7513 CM1000 C2408 R8709 R8710 CL8700 CL7762
R7981 C8711
1

20

C7880 C2402 R2406 C8712 C3058 C3263

C7884 cam049 R2409 R8711 R8712 R3401 R3400
C3422 C3421
C1443 C2405 C2424 C8713 C3264
21

IC3400
R7988 R7514 C2415 R3311 R3310 C8714 C3265 CL3411
R7989 R7987 R7983 R7986C7901R7985
R7982 R7990
R7991
R7984 C7883
C7882 R2410
C1445 IC1402 R2407
R2408 C8715
C2427 C2662
C2224 C8716 C3271 CL3402
C2664 C2603 FL2605 C8747 CL3409
C2425 C8717 C8750 C8748
C8749
C1446 C1011 R1022
C1006 C2428R2412 C8718 C8756 C3475
C3275 CL3401 CL3408
C2430
10

C7898
11

C8719 C3276C3474
16 1
C8755 IC3000 CL3405
R1024R1119 C2409 R2411 C8720 C3468
C3277
IC2401 IC2400 C8754 CL3404 cam060
R1475 R2400 C8721 C8753
C8752
C8751 C3476
C3278 CL3410
R1121 C2606 C8722
C7881 33 VD1402 VD1401
R1473R1472 R1481 VD7508 C2429 C3274
IC7708 C2607 C8723 C3477 C3438 C3437 C3436 C3441R3408 C3434 C3433
C3479 C3435

1
D7531 FL2600 C2412 C2404
C2617 ET031 C8724 C3051 R3407
C2604 C3469 CL3400 R3402
C3054 C3073
VD7506 C8725 C3052 C3061 C3442
R7552
R7535
R7539 C1015 C2413 C2400 C8726
17 32
C7889 D7505 C2410 C3055 C3060
C8727
R7992 R7529 C2610 C8728 C3267
VD7507 R7725 R1025 C2414 C8735 C3019
C8737 C3014
C3013 C3050C3048
C3049 C3481
C3480 C3483
C3482 C3478C3147 C3270
C3279
RB8704 RB8702 RB8700 CL2201 C8729 C3268
1

D7511 C7517 ET032 C3473

C7900 C7899 D7530 C1409 FL2604 C8730 C3471
C3472 C3462 C3463C3283C3282
C3465 C3281C3466
C3280 C3470
C3461C3464
C3272
C7888 C7885 R7724
C1413 C9807 C8731 C3262
C3273
C7891 C7890 RB8705 RB8703 RB8701 cam050 C8740 R8718
R8717
D7510 R7536 D7506 R1501 C8741 C3269
CL7501 C9802 cam028 C2403 R2213
C2231 C2653
R1402
VD7505 R1415 C2222 R3337 CL3002
C7887 C7886 R7517 R2214 cam027 R3003
CM3000 C3467
C7508 D7500 R1441
R1440 C9801 C2210 C2609 C2209 R2202 C2217 C2211 C2658 R3322 R3325
R3321
R7518 R1414 C2023 C2656
R7523 C2660 C3024
C7510 C7783 C3151 R3318 R3181 CL3001
L7500 C1423
C1420 C9800 R3002
cam203 C1008 C2212 C3126 R3178
R1443
R1442 C8700 8 5 R3317 C3124
C7514
R7524 R2011 C9804 R3114 C3417 C3415 C3413 C3419 R3125 C3121
C1401 C7786 C7785 C7787 C7784R7721 R1023 R3182 R3105 CL3123 C3065 C3064
R3127
C7509 C9803 IC3102 CM3101
CM3100
R3323
R3324 C3100
R3151 C3101
R3152 CL3202 C3418 C3416 C3414
R2010 C1405 R1437 R7715 CL3122
C7788R7713R7723 R7719 R2007 R1120 C9805 1 4 R3315 cam047 CL3201 C3507
R1435 R7717 R7720 C3134 R3305 R3126
C9806 C8701CM2200 R3136 C3130 CL3121 C3224 CL3200 CL3204
CL3205 R3201CL3206
CL3207
CL3203 C3208
C3209 C3211 C3213 C3215 X3100 C3412
C3217 C3420
C3216 TP3110
L7703 L7702 L7701 L7700 C2014 R7712R7722 R7718 R7714 R2217 cam045 R3316 R3135 R9432
R1509 C8703 C3220 C3222 C3210 C3212 C3214
cam107 R7716 RB3103 C3132R3129 RB3102 C3128R3128 CL3120 C3137 R3140
R3133 C3424
R5476 CL8300 R8700 IC2203 C3120 R9431
C2013 C8705 C2218 R3319
R3320 CL3118 C3223 C3200 R3202 R3200
R1521 C1403
Q1400 Q1401 R1520 Q1402 IC1408
RB2003 RB2004
C2009 R2006 C2003 C3138
CL3119
C3139
R3167 C3423 C3221 1
ET037 R9430
C1440 C2008 R3137 CL3116
C2010 R1436 C2236 RB3104 R3130 C3400 R3176
C1463 R1469 C2007 C3136 C3133 C3411
C3410
C3409
C3408
R2004
CL9007 C2001 C2011 R1458 C3131 R3138 R3132 CL3113
CM3200 C3143
C7895 C7894 C7893 C7892 cam075 RB2001 RB2002 C2004
R2003 cam046 C2012 R1468 C3129 R3131 R3139 R3172
C1439 R1457 C2006 R3166
C3135 R9440 CL3214
C2015 R2013 L9402
R2014 C1427 R1428 C2005 CL3209
CL3208 C3232 CL3212
CL3213 C3250
C2017 C3103
R3153 R3115
R3184
R3190 R3342 C9437 C3219 cam055
3 1 2 C9811 C2234 C2618 C2661 C2619 C2214 R3189 C3153 R3175 C9426
IC2002 cam098 cam023 C2625 R3118 cam037
4 5
C2020 C2208 C2213 C2215 cam054

8
RB2005 R1507 R1636 R1631
CM8304 C3230 C3248
R2210 R2209 C2201
C2626 R1630
CM8303 5 4 C3238 C3256
R1431 C2620 R3116 R3117 R3108 IC9405
C1013 R1041 RB2006 R2201 C3115 C9427 C9430
C2204 C2203 C2202 C2216 C2221 C3107 C3111 C3113 1 2 3 C3231 C3249
C2016 R2005 R1637 R1632IC1600
CM8305 8 5
R2009R2015 C1426 R1416 R1508
C1418 C3237 C3255

1
J1401 J7701 R2002 C9810 ET038 R1629
CM8302 R1601R3154 R3156 R3157
FL2606 C9431
R1054
R1607 R3110 C9436 C3229 C3247 C3308 C9428 IC9403
9

16
C9809

1
C7897 C7903 C7904 C7896 C2022 R2012 IC2001 R1053 R3107 CL3101 C3236 C3254
C2002 R1426 C2205
C2624 R3183 R3120 R3109 CL3211
R1519 R1423 R1502
C1429 1 4
C2019 C1600R1604 C3109 CL3102 C3104 C3235 C3228 C3253CL3215 C3246
cam073 C7902 cam064 R2016 R1518 C1404 R3185 R1600
cam044 R3187 R3155 C3118
C7905 cam059 R1050 C3227 C3260 C3245 R3203
C1042
R1000 R1001 R3188 R3207
C3242 C3241 IC3200 C3259
R3212 IC3201 cam084
C2021 R2001 R1162 C9808 C1038
R3197 R3192R3179
R3191
R3186 C3144
C3106 CL3103 R9438 R3204 R3209 R9427 C9424
R2017 C1402 R1424 CL1013 CL7602
CL7606CL7608
CL7609 C9814 R3119 R3208 R3213
cam039 C7601 CL3100 C3102 C3240 C3258 R9426
C2018 R1517 R1161
C1040R1049 CL1012
R1005
R1004 CL7603
CL7604 CL7610
CL7605 R1048 cam204 CL3210 R9428
IC2202 C2666 R3198 C9425
1 4 C1406 R1422 R1046 R9801C7600 CL7607 IC1000 C3218
R3206 R3211 RB3205 RB3212 C9432
R9425
R1099
C1033 R1461 FB7500 CL9802
R9803C8037
C3234 C3239 C3252 C3257
R8013 C3105
R3106

ON
CN7707 C1425 R1429 R3205 R3210 C9429
C1421R1418
R1511 R7600 R1505
C1435 R7526 C7513 RB3204
5 6 C7823 C7824 C7860
VD7704 R7961
R7964 C7862
R7966
C7858 C7859
VD7703 R7959
R7963 C7861
R7965 C7857
C7533R7527 C7515
R2206 Q3100
CL3115 C3233
C3226
C3251
C3244
RB3211
R7554 C2226C2227C2423 cam096 R3307
C7819 R7551 C7516 R9069 C3307
cam072 F9002 R3100 D3100

4
cam038 C2627 C2623

1
RB3101 S3100 RB3100 F9403
R7530 C7518 CM9004 IC9010
CM7706 C7821 C7871
R7813
R7811 C7831 cam033 R3306 RB3203 RB3210

3
2
5 1
R7553 C7520 cam018 C9060 C3225 C3243
RB7713 RB7712 C2611 C2206 C2207 C2621 C2622 D9000 R9071 C9036 CL3114
C7820 IC7707 C2200 R2200 C2233 C9059
R7504 C7502
6 10

FB7501 C2605 C9061

C7872 R7815 C7832
R7814 R7508 C7504 C2614
C2602
C2220 D9001 RB3202 RB3209
C7870 R2215
R2216
C2232 C2608 CL2206 C9033 R3134
4

R7507 C7505 R2208 C9152 CM9005 R3340

C2421 RB3200
C7822 C7532R7601 C7602 cam28 C3116
TP3106 R7973 R7598 R7511 C7507 C6303 R2207 C2225 R9070 R9000 C9031 R3344 Q3102
R8042 Q8000 R8044
R8043 C2416 R9067 cam579 R3150 RB3201 RB3208
R7525 C7512 R9011
5

cam067
4 1

R7708 C8005 C8021 R1064

C1047 R9083R9082R9081 R9072
C9073
5 16
R9068 R9010

8
R7580

1
C8022 R7519 C7511 R6035 IC9009 C9000 R3341
F7701R7705 R8045 C2612
17
C9076
C9074
1

R2602
13 8

R1171 R8057
12 9
R9005 Q3101 RB3206 RB3207 S8400
IC7702
9

R7707 R7515 R7516 C9082 TP3105

R1056

9
IC9001 C9028
CL7707 R1172 R8018 C8042
R8056
R8017 C2219 C9087
C9004 TP3112
R8421R8422
Q8002
1
8
2

CN7703 R7706 Q8001 R2601C2420 R3343

C9010

5
CL8003 C9821
cam071 CL7705 IC2600 FL2607 C9121
cam3 C7764 C7732 R8058D8001 C8702 R2612 L9002
21 22 C7734 C8704
C8706
C8707 R9804
C2634

24

23
C8018 C5605 C1050
3

R1047
C1036 C8019 R2614 L9007 R9020
C7740 C8000 C5604 R8014 C1052 cam040 C9044 C9042 C9039
C8001 R1134 R2613 R9042
CN5201 R7802 C7735
20 23 C7737 C9812 C2652 R9041

70
CM7702 R1057
C7733 R1052 R1135 C9813
1 19 RB7004 RB7001 R1029 R1014
R1012 CM9000
5

R7599 FL7700 C7738 C7736 C2628 C2636 R9040

R8015 CL6302 CL7771
R7522 R1055C1044
C1045 C8036
C8035
C7739 cam053
C6301 R1044 C1031
C1014 C1046
C1022 CL2200
R1060 R9802
R2219
CL5222 R6327 R6301 CL6301 CL6312 RB7002
CM6301 C1025 C2600
C2601
CM6300 R6302 C2651 C2629
R2605 C2613
R2604 C2616 C2615
C2230 C2419C2422
cam017 VD5205VD5203 R6326 R6300 CL6300 X1000 R6314CL6304
C6300 R1003

68
D5210 R1013 R1058
R1011
R1008 C1051 C2228
R1059
cam043 RB5231 RB5232 R1175 R6313 RB7006 R2611
R5515 VD5600 R6318
C6304

1
R5610 R2610 ET033

34
RB5218 CL5245 CL5304 CL7753 R1002 R1133
R1100 C2418 C2417
R5611 R6315 R7022 R7017
C5388C5387R5516 CL7752
R7846 R6303 C1018 C1010
C1003 C1048 R1132
C1049 R1101
R5523
VD5201 CL7751CL7750 R7852
CM7703 D5600
C6302 R1123 RB7022 RB7011 RB7018
R7573 R7849R7847 CL5221
R7571 R7853 RB7025
R7848 CL1009
C1438 R7004
R7575
R7960 C5606
C6011 C6023 R7570 R1456 R1051 C7008 R7015
R6008 FB6003 C6009 R7962 R7023
X7000
cam095 R6007 FB6002 C6008
C6010 C6022 C1437 R1455 R1467
1

ET034 R1466 RB7032 R7034

R7035 R7033
R7019 RB7012
C5602
C5603 R7002 R7032
R5613 R7009
R7028 cam057
cam068 CM5202
R5351 RB7033
R5612 R7018 R1098 C8427
cam100 Q5605 RB7016 8 1
R5615 C8418 R7008 R7029 C7005
R5614 R7005 C8426 IC7003
R8419 3 1 2 cam076 R8423 9 16
IC8403
4 5 RB7031 C8422
cam101 R6015 RB7007 RB7021 R7011 R7027
cam15

14 10
CM6004 R7030 RB7020
C6016 R8401
C8421 R8400 R7026

9
RB7008 C8417 R7010 RB7028
R6016 cam074 C8425
R6070
R6071 R8402 C7006
CM6005
C6017 R7024R7007C7009 RB7009 RB7019 C7007
C6012
4
3

10 1
cam102 CM6006
R6017 RB7005
IC6000 CM6012

18
R6072 R7031 C7002
CM6007
R6018 R6069
1
5

8
C6025 R6009 IC8400 C8428 cam056
R7006
R6020
CM6008 C6070 cam066
R6010 R6321
CL6307 C7001
R7025 RB7023 CN7001 CN8400 A7001
cam007 C6026
R6021CM6009 R6320
CL6306
R6319

5
11 20
C7004

1 2
CL6305 C7010 RB7029 C7003
R6022 R6325CL6311 C8400 IC7002
CM6010 R6322
CL6308 R1027
R6033 CM6011 R7003
R1028

3
4
R6800 R6323CL6309 RB5209 RB5211 Q5206 C1023
R6324 RB5212 R5477
R6801 CL6310 CL5262 R5393CL5263R5394 C5383
C5384
C1027
C7805 R8403
R8413 R8408
R8405
RB7026 RB7035
C8430
R6802 CL5260 RB7013 R7020 RB7014 C7808 C8424 C8407C8420
R5498R5395 R1009 R1124
C1005
R6803 C5335 RB5210
RB5206 R5497 C7809 C8423 R8406
R6317

7
CL5264

11
R5422

15
R6003 R6316 R5390
R5391 R5396 R5496
R5495 C1007 cam031
C5315 C5321C5322C5327
C5373 C5325 C5323C5324
C5372 C5381 C5382 R5408 R5407 R5405
R5406 R5494 R8412 R8414

1
9

8
R1010

5
R6004 C5320 CL5261
CL5259 R8415 RB7030
CL5600
C5347 CL5601CL5603
CL5602 C5350 IC7703 R7979
C6007 C7810 R8407 RB7003 C8409
R5423R5424 C5351 C8406 IC8401
C6006 C8405 R7014

14

1
cam103 A6000 cam082 C8403 R7013
cam085
R6005
C6004 156 105 C5349R5274R5273
C5348 R8410
F9009

16
R6001
R6002 Q9018 C5352 CM7705 R7012 8 5

1
D8400
FB6001 157 104 R7805
C7811 C7812 RB7711 C7814 C7813
R7809 R8409 cam051
RB7034
R6006 C6005 X5202 CL5251
CL5252R5527 D5204 C8402 R8404 R8420 C8401 RB7027
C5338 IC8402
9
C6002
C6001 R9189 R5521
R9190 C5297 CM5203
R5373 R7804
R7806 R7807
R7808
C6021 C9120 C5326 CL5253
CL5254 D5203 C8410 1 4
R5374 RB7710 RB7010
C6020 FB6006 CL5604 C5298 R5368 CL5255
CL5256
RB5220 R7001 cam577
C5200 R5268 C7815 C7817 C7818 C7816 RB7017
R5478 CL5258
CL5257 X8400
cam109 C6018 Q9019 R5622 R8416
C5376 R5295R5296 R5357 C7807 RB7015 R8417 R8418
R6062
R6063 C6019 CL5225 R5293 RB7709 RB7708 R7021C8419 RB7024
FB6005 F6000 C5361 C5374 8 5 CM7001
CL5226 R5294 R5380 C7806
14

R6061 R5480 C5341

13

CM5205
R5377 IC5200
C5356
C5340 C5329 R5448
C6024 C6030 R6011 R9058 R5378 1 4 R5379
R6068
CM6003 R5450

35
cam077 C5377 C5375 CL5300
CL5299 R7016
CM6002 R6065
R6014 R5376
C9053
C9055 R9053 R9059 CL5298 R5449
CL5297 C8429
C6029 R6064 C5353 C5339C5330 CM5204
R5375 CN5200
R9048 R5297 R8424 cam14

1
C9058 CL5295CL5296 CL5227
C6028 R6066 R5320
4 1
cam080 R5503 C5309 CL5293
CL5294
C9077 CM6001
R6013 RB5227 RB5243 209
IC5212 cam081RB5224
L9005 CM6000
R6012 R5504 C5368
2

9
R9014
C9002
1

C6027 IC9006 RB5214

C9071 R5505 C5308 cam2

19
20
5 8 C9072 C9078 R9015
RB5228 RB5244R5506 C9008

69
R6067R6036
R6019 C9084 C9012 R9008R9001
R9002
C6013 C9067 C5337 C5318
C9066 C9063 RB5213 R9003
C5362 C5342

21
C6014 C9080 C5367

22
Q6001 R5213 F9011 R9207 cam041
C9079 D5208
4 1 R9206 R9205
C6015 C9139 R9204
C6800 F9010 RB5235 RB5241 R5499 C5306 C5366 cam078 R9202 C8034
8 5 C9064CL5248 R5500 C5328 9
R9203
cam088 C9083 FB6004 FB6800 IC9002
6 1
C9142 C8032 R8036
L9006 Q5200 C5365 Q5204 7 23

IC9005
9 TU6802 R5501 C5307 5 8 C9141
RB5236 RB5242 RB5216 C9043 C9040 C9137 C9136 C9135
C5295
R5207 R5308 C9034 C9037 IC9014
1 4 R5491 R5487 R5502 5 4
C5336 C9032 C9149
C9138
C5319 Q5203CM9006 11 18
C9140 IC8003
R5490 D5200 R5212
R5211 L8000 1 2 3
cam12
12 17
C5364 R5309 C8030
R5208 R5210 C5354 C5343 208 53 C5294 R9032
R9052 F9003 cam10043
C9057 Q5209 R5312 R9031 R8032 C8029
R9047 R9057 C9054 C8016 C8015 1 52 C5363 C9029 C8031
cam097 TU6003 D5201 D5202 Q5201 C5222 RB5215
C9146 C9145 C9144 cam10058 RB8005 RB8000
C6003 R5399
C5304
C5305 R9033
C9052 L9003
3 1 2
R9056 R8035 C8411 C8414 C8413 C8412 C8408
R5489R5209 cam065 4IC8006 5 L8001 VD8003VD8002 L8002 VD8001VD8000
cam8 R5488 C5310 C5378 C5332 CL5228
CL5271
CL5272 CL5277 CL5278CL5279C5357
R5409 C5334 R8038VD8009
RB5221 RB5222 CL5276 L9008 C8038 VD8011VD8010 VD8013VD8012
T8002 T8001 C5311 CM5206
CM5207 C5359
C5331 C5333
C8017 R5400C5355C5314 R5398C5303 R5298
R5299 R5481
R5427
CL5275
R5444
R5445 R5451
CL5303
R5446
R5455 R5447 cam014
R5397 CL5273 R9123R9122R9121R9120
cam069 R5418
R5417 CL5269
CL5301 CL5274 R5443
RB8004 R5421 R5438 R5442
R5454
R5419C5317 R5431
R5430
R5433
R5432 R5437 R5439 R5441
R5435
R5434 R5436 R5440 R5453
cam021
C7560
C7559
D7537 Q5208 R5479 R5452 TP3104 RB8001
TP3103 VD7538
cam112 C5360 17 16
C7562 C8028 10 13 R7818 C7835 C7834CM7707C7833 C8040 VD8005VD8004 TP3100
D7538
C7561 VD7539 cam1 cam6
CL5307 CL5306 R8031 R7845 VD7702 VD7701 VD7700 C8002VD8006
R8009 R8012
cam086 R5520
C5390 R5517 9 5
TP3107 D5213 cam015 CL5305 VD8008R8033 cam111 R8010
R7562 C5380 cam009
R7561 D5212 C5371R5428
R5429 D5211 1 4
R5468 R5467 RB5208 C5391 RB5219 C8039

4
3
RB5207 cam377
R5456CL5223 1 2 3 4
C8004C8003 IC8002

1 2
C7521 R5526 C5379 TP3113 C5370 C5389
VD5212VD5210 RB5240 RB5239 R5525
VD5208 VD5206VD5207 RB5238 RB5237 R5524 VD5202VD5204 RB5230 RB5229 14 15 5 8

5
TU6001 R7521 R7558 cam036 VD5211 cam029 cam030 CL5237
VD5209 cam026
D7512 cam106
cam4 CL5292 CL5270 cam063
CN8005

5
D7513

1 2
TU6000 IC8001
CN8003 19 1 19 1 19 1 IRM002 KA002

3
4
CN8002
CM7510D7514
FB7502 VD7520 J7505 23 20 23 20 23 20
J7700
CN5208 CN5203 CN5202 6 7
22 21 22 21 22 21

cam010 cam002 cam003 cam004 cam001

cam070

cam006
cam009

cam001 cam002
cam004

cam005
KJ001 KJ002

XBR-55X850D/857D, 65X850D/855D/857D 57
 TROUBLE SHOOTING

PCB PARTS MAP

BMFW2 (B side view)
KJ004 KJ003
cam007

cam011
cam008

CM7704

JL6029
IRM004 KB002

JL8022
JL6005
JL8002
JL8011
JL8023
JL5216 JL8024
JL6008 JL8007 JL8005 JL8006 JL8008
JL5212
JL5209 JL8017
JL8021
JL6007 JL5219 JL5211
JL8015 JL8014 JL5213 JL8018
1

ET6000

1
ET6001 JL8013 JL8012 JL5214
JL8000
JL6009 JL8009 JL8010
JL8001
JL6030 JL8003 JL8004
JL6010 JL6011 JL6028 JL6019
cam006 CL5290CL5287 CL5268
CL5285 CL5282 DM002
JL5227 CL5281
CL5280 CL5288 CL5283
CL5266
CL5289 CL5286
CL5284
JL5201

cam104 JL9021
JL9022

JL6034
JL5221
JL5222
JL6014 JL6016 JL6020 JL6022 JL6025 JL5202
JL5203
JL6012 JL6013 JL6802 JL6015 JL6017 JL6021 JL6023 JL6024 JL6026 1
cam016 ET021
JL5205
cam105 JL5224 JL5207 JL5226

JL6027 JL5206
JL5225
JL5204

cam23
JL5223
JL6006 JL6031 JL6018
JL6033
cam048 JL6032
cam108
CL5267

JL6004

cam092 cam17

cam093
cam008

cam094 cam208

cam209

cam099

cam022
cam210

JL5210 1
ET012

CM7701

JL9015

CL7764
CL8004
CL6000 JL9016
CL8005
CL7763

CL7600
CL7601
CL1000
CL1001

CL9800
JL7829 CL9810 JL3108
JL3109

JL7830 JL3106
CL9801 JL3107
CL9805 CL9803
JL7831 JL3103 JL3102
JL7834 JL7835 JL7836
JL9024
JL3100 JL3101
JL7833

CL8307 CL8308 CL8301 JL3104

1
ET014
CL7708
JL3105

JL9800
1

ET013

JL9018 CL8711
JL1431
CL8710
JL1429

CL8709
CL8708
cam16

CL8707 CL8706
1

ET011
JL9023 CL3109
JL3603
CL3604

JL1417 JL3601

JL1416

JL1415
JL1400
JL1401 JL7500
JL1402
JL1403 JL9017
JL1418

JL1410
JL1015 JL1419 JL1420
JL1406
JL9025
JL1422
JL1014

JL1424
JL1013
JL1423 JL1407
JL1009
JL1413
JL1012 JL1421
JL1414
JL9026
JL1425
JL1011
JL1404
JL1405 JL7506
JL1010
JL1426

JL1430
KB001 JL1428
JL1427 JL9032
JL1408 JL1409

cam012
JL1411
IRM003
JL1412
JL9401
JL7507 JL9400

JL9035 JL9036 JL9037

JL9030

JL9029

JL9034 JL9033

JL3602 JL3600 JL9031 JL9009 JL9007 JL9005 JL9003 JL9001

JL1016 JL1000 JL1002 JL1004 JL1006 JL1008 JL1024
JL9019 JL9011
JL9028 JL9027
JL1017 JL1001 JL1003 JL1005 JL1007 JL1023 JL9000
JL9020 JL9014
JL9012 JL9038 JL9010 JL9008 JL9006 JL9004 JL9002
JL9013

XBR-55X850D/857D, 65X850D/855D/857D 58
DIAGRAMS
BLOCK DIAGRAM

XBR-55X850D/857D, 65X850D/855D/857D 59
 SM BAX_F CN3601 To BMFW T-con
CN203
BMFW2 GND 1 51 GND
1-798-510-31 HUS_GND 1 15 #30 VBTX7P 2 50 RxP7 Board
HUS_KEY_AD 2 12 #30 VBTX7N 3 49 RxN7
HUS_POWER_KEY 3 14 #30 GND 4 48 GND
1-821-143-11 1-821-117-11 VBTX6P 5 47 RxP6 PANEL FFC
JAM SYT10-3WL SYT10-03HG VBTX6N 6 46 RxN6
GND 7 45 GND
VBTX5P 8 44 RxP5

XBR-55X850D/857D, 65X850D/855D/857D
VBTX5N 9 43 RxN5
GND 10 42 GND
CONNECTOR DIAGRAM
1. XBR-55X850D/857D

VBTX4P 11 41 RxP4
CN1001 VBTX4N 12 40 RxN4
6 1 WIFI_STBY_3.3V GND 13 39 GND
2 2 X_WIFI_BT_RST VBTX3P 14 38 RxP3
1 3 SC_STBY_3.3V VBTX3N 15 37 RxN3
3 4 X_WIFI_WAKEUP GND 16 36 GND
1 5 WIFI_GND VBTX2P 17 35 RxP2
4 6 X_BT_WAKEUP VBTX2N 18 34 RxN2
5 7 WIFI_GND GND 19 33 GND
Main 11 8 3D_LR VBTX1P 20 32 RxP1
9 9 WIFI_GND VBTX1N 21 31 RxN1
10 10 X_BT_WAKE2 GND 22 30 GND
13 11 WIFI_GND VBTX0P 23 29 RxP0
2 12 KEY_AD VBTX0N 24 28 RxN0
2 13 5V_MAIN GND 25 FFC 51P 27 GND
3 14 POWER_KEY VBTXLOCKN0 26 26 LOCKN
1 15 WIFI_GND VBTXHTPDN0 27 25 HTPDN
11 16 SC_OPT_SENSE GND 28 24 GND
3 17 SC_GND NC 29 23 SDC Use
GN2 Smart Core 12 18 SC_SIRCS NC 30 22 SDC Use
10 19 SC_MAIN_3.3V BITSEL 31 21 SDC Use
CN001 4 20 SC_LED_AMBER /WP/(BINT) 32 20 B_INT (High:Write / L/Open: Protect)
STBY3.3V 1 3 #30 9 21 SC_GND SCL 33 19 SCL
HSC4 5V_MAIN 2 13 #30 5 22 SC_LED_PWM_W SDA 34 18 SDA
GND 3 17 #30 NC 23 KEY_GND 3D_EN/(MUTE) 35 17 3D_EN
LED_AMBER 4 20 #30 8 24 SC_LED_PWM_G 3D_SYNC_IN 36 16 3D_Sync_In
LED_PWM_W 5 22 #30 NC 25 GND_OPTION 3D_SYNC_OUT 37 15 SDC Use
LEY_STBY_PWM_R 6 28 #30 7 26 SC_LED_PWM_B GND 38 14 GND
LED_STBY_PWM_B 7 26 #30 NC 27 NC PANEL_DET 39 13 GND
LED_STBY_PWM_G 8 24 #30 6 28 SC_LED_PWM_R GND 40 12 GND
GND 9 21 #30 NC 29 NC NC/GND 41 11 GND
MAIN_3.3V 10 19 #30 NC 30 NC NC 42 10 GND
OPT_SENSE 11 16 #30 NC 43 9 NC
SIRCS 12 18 #30 1-819-455-11 1-818-693-22 NC(PANEL_RESETX)/12V 44 8 NC
1-821-139-11 1-821-126-11 SHLDP-30V-S-1 (B) JST SM30B-SHLDS-GANF-1-TF(LF)(SN) NC(PANEL_READY)/12V 45 7 NC
JAM SYT10-12WS SYT10-12HG NC/12V 46 6 NC
NC(PANEL_PWR)/12V 47 5 NC
NC(PANEL_ON)/12V 48 4 NC
NC(ABL_HOT2)/12V 49 3 NC
CN1002 NC(ABL_HOT1)/12V 50 2 NC
USB 14 1 WIFI_USB_M NC(ABL_HOT0)/12V 51 1 NC
USB Cable(UL2725) USB 15 2 WIFI_USB_P 1-842-546-21 1-819-812-11
Wifi/BT GND 1 5 #30 USB 12 3 WIFI_GND FFC Direct Connector :IPEX JAE/FI-RE51S-HF
RST_L 2 2 #30 USB 8 4 WIFI_STBY_3.3V or Yamaichi 1-843-107-12
FY16 WOW_L 3 4 #30 USB 7 5 WIFI_STBY_3.3V
WOBT1_L 4 6 #30 CN3600 To BMFL
GND 5 7 #30 1-821-119-11 1-821-145-11 NC_HTPDN1/ELTIMO3/POWER_ON 1 41
VCC 6 1 #30 SYT10-05HG JAM SYT10-05WL NC/LOCKN1/ABL_PHT/READY 2 40
VCC 7 5 1 BLK#28 NC/SDA/PANEL_ERROR/PANEL ON 3 39
VCC 8 4 1 RED#28 NC/SCL/PANEL ERROR 4 38
GND 9 9 #30 CN1003 SPI_CS 5 37 NC (SPI_CS)
WOBT2_L 10 10 #30 1 WIFI_STBY_3.3V SPI_CK 6 36 NC (SPI_CK)
VSYNC 11 8 #30 2 WIFI_USB_M NC/RESETX 7 35
GND 12 3 1 Shield 3 WIFI_USB_P NC 8 34
GND 13 11 #30 4 NC NC 9 33
DM 14 1 1 WHT#28 5 WIFI_STBY_3.3V NC 10 32
DP 15 2 1 GRN#28 Shell WIFI_GND NC 11 31
1-819-332-11 1-819-502-11 1-822-425-31 VCA/(SPI_SEL0) 12 30 NC
JST SM15B-GHS-TB(LF)(SN)
GHR-15V-S ACON USB mini-AB BUS_SW 13 29 NC
SPI_DI/(WDT) 14 28 NC
SPI_DO 15 27 NC
SPI_ENB 16
FFC 41P 26 NC
GND 17 25 GND
BT VBTX15P 18 24 RxP15
Antena VBTX15N 19 23 RxN15
GND 20 22 GND
VBTX14P 21 21 RxP14
VBTX14N 22 20 RxN14
GND 23 19 GND
VBTX13P 24 18 RxP13 J110
VBTX13N 25 17 RxN13 GND Ground 1 29 AWG#22
PSJ
LD Board
Board GND 26 16 GND GND Ground 2 30 AWG#22
VBTX12P 27 15 RxP12 PWR Power V12 IN 3 NC
VBTX12N 28 14 RxN12 PWR Power V12 IN 4 26 AWG#22
GND 29 13 GND PWR Power V12 IN 5 28 AWG#22
CN4001 VBTX11P 30 12 RxP11 1-822-322-11 1-820-264-11
VBTX11N 31 11 RxN11 JST SM05B-PASS-TBT(LF)(SN) PAP-05V-S
SMAW200-H30CE #22 CN9000 GND 32 10 GND
PWM0(BLINKING) 1 27 24 30 STBY_3.3V_OUT VBTX10P 33 9 RxP10
IP_REF(DC DIMMER) 2 26 3 29 FB_REF VBTX10N 34 8 RxN10
FB_REF 3 29 NC 28 BLINKING GND 35 7 GND
LD_MODE_SW 4 5 1 27 PWM1_DIMMER/PWM0 VBTX9P 36 6 RxP9
GND 5 NC 2 26 DC_DIMMER VBTX9N 37 5 RxN9
PWM1 6 25 6 25 PWM2_DIMMER/PWM1 GND 38 4 GND
GND 7 19 #22 30 24 STBY_3.3V_IN VBTX8P 39 3 RxP8
PWM2 8 23 8 23 PWM3_DIMMER/PWM2 VBTX8N 40 2 RxN8
GND 9 17 #22 14 22 BL_ON/ICSPCLK GND 41 1 GND
PWM3 10 18 12 21 BL_ERR 1-843-699-11 1-819-564-11
AC_OFF_DET 11 NC 13 20 POWER_ON/ICSPDAT FFC Direct Connector :IPEX JAE/FI-RE41S-HF
BL_ERR 12 21 #22 7 19 GND or Yamaichi 1-843-708-12
POWER_ON/ICSPDAT 13 20 10 18 PWM3
BL_ON/ICSPCLK 14 22 #22 9 17 GND
GND 15 9 #22 #22 16 16 REG_19V_12V
REG_19V 16 16 #22 #22 18 15 REG_19V_12V
GND 17 7 #22 #22 19 14 REG_19V_12V_Audio
REG_19V 18 15 #22 #22 20 13 REG12V
REG_19V_12V_Audio 19 14 #22 #22 21 12 REG_19V_12V_Audio
REG_12V 20 13 #22 #22 22 11 REG_12V
REG_19V_12V_Audio 21 12 #22 #22 23 10 GND
REG_12V 22 11 #22 #22 15 9 GND
GND 23 10 #22 #22 25 8 GND
GND 24 NC #22 17 7 GND
GND 25 8 #22 NC 6 DC_DET_VTH/LD_MODE_SW
TCON_VCC12V 26 4 #22 4 5 GND
TCON_ON 27 3 NC 4 T-CON_VCC12V(NC)
TCON_VCC12V 28 5 #22 27 3 T-CON_ON
GND 29 1 #22 NC 2 T-CON_VCC12V
GND 30 2 #22 NC 1 VPP_PIG
1-843-961-11 1-843-925-11 1-843-917-11
YEONHO SMH200-H30CE PBDP-30V-S JST SM30B-PBDSS-TF

19.5V 丸型ジャック
J9000
1-843-683-11
+ AC Adaptor
-
19.5V

CN7707
1 1 SP_MAIN_RP
2 2 SP_MAIN_RN
2 3 SP_MAIN_LN
1 4 SP_MAIN_LP
1-842-593-11 1-842-566-12
PBVP04V-S SM04B-PBVSS-TB(LF)(SN)(PS)

SPEAKER L+ 1 4 #22
Front L- 2 3 #22
Lch JST SMP-02VF-N
1-784-991-21

SPEAKER R+ 1 1 #22
Front R- 2 2 #22
Rch JST SMP-02VF-N
1-784-991-21
DIAGRAMS

60
 SM BAX_F CN3601 To BMFW T-con
CN203
BMFW2 GND 1 51 GND
1-798-510-31 HUS_GND 1 15 #30 VBTX7P 2 50 RxP7 Board
HUS_KEY_AD 2 12 #30 VBTX7N 3 49 RxN7
HUS_POWER_KEY 3 14 #30 GND 4 48 GND
1-821-143-11 1-821-117-11 VBTX6P 5 47 RxP6 PANEL FFC
JAM SYT10-3WL SYT10-03HG VBTX6N 6 46 RxN6
GND 7 45 GND
VBTX5P 8 44 RxP5
VBTX5N 9 43 RxN5

XBR-55X850D/857D, 65X850D/855D/857D
GND 10 42 GND
VBTX4P 11 41 RxP4
CONNECTOR DIAGRAM

CN1001 VBTX4N 12 40 RxN4

6 1 WIFI_STBY_3.3V GND 13 39 GND
2 2 X_WIFI_BT_RST VBTX3P 14 38 RxP3
1 3 SC_STBY_3.3V VBTX3N 15 37 RxN3
3 4 X_WIFI_WAKEUP GND 16 36 GND
1 5 WIFI_GND VBTX2P 17 35 RxP2
4 6 X_BT_WAKEUP VBTX2N 18 34 RxN2
5 7 WIFI_GND GND 19 33 GND
Main 11 8 3D_LR VBTX1P 20 32 RxP1
9 9 WIFI_GND VBTX1N 21 31 RxN1
10 10 X_BT_WAKE2 GND 22 30 GND
13 11 WIFI_GND VBTX0P 23 29 RxP0
2 12 KEY_AD VBTX0N 24 28 RxN0
FFC 51P
2. XBR-65X850D/855D/857D

2 13 5V_MAIN GND 25 27 GND

3 14 POWER_KEY VBTXLOCKN0 26 26 LOCKN
1 15 WIFI_GND VBTXHTPDN0 27 25 HTPDN
11 16 SC_OPT_SENSE GND 28 24 GND
3 17 SC_GND NC 29 23 SDC Use
GN2 Smart Core 12 18 SC_SIRCS NC 30 22 SDC Use
10 19 SC_MAIN_3.3V BITSEL 31 21 SDC Use
CN001 4 20 SC_LED_AMBER /WP/(BINT) 32 20 B_INT (High:Write / L/Open: Protect)
STBY3.3V 1 3 #30 9 21 SC_GND SCL 33 19 SCL
HSC4 5V_MAIN 2 13 #30 5 22 SC_LED_PWM_W SDA 34 18 SDA
GND 3 17 #30 NC 23 KEY_GND 3D_EN/(MUTE) 35 17 3D_EN
LED_AMBER 4 20 #30 8 24 SC_LED_PWM_G 3D_SYNC_IN 36 16 3D_Sync_In
LED_PWM_W 5 22 #30 NC 25 GND_OPTION 3D_SYNC_OUT 37 15 SDC Use
LEY_STBY_PWM_R 6 28 #30 7 26 SC_LED_PWM_B GND 38 14 GND
LED_STBY_PWM_B 7 26 #30 NC 27 NC PANEL_DET 39 13 GND
LED_STBY_PWM_G 8 24 #30 6 28 SC_LED_PWM_R GND 40 12 GND
GND 9 21 #30 NC 29 NC NC/GND 41 11 GND
MAIN_3.3V 10 19 #30 NC 30 NC NC 42 10 GND
OPT_SENSE 11 16 #30 NC 43 9 NC
SIRCS 12 18 #30 1-819-455-11 1-818-693-22 NC(PANEL_RESETX)/12V 44 8 NC
1-821-139-11 1-821-126-11 SHLDP-30V-S-1 (B) JST SM30B-SHLDS-GANF-1-TF(LF)(SN) NC(PANEL_READY)/12V 45 7 NC
JAM SYT10-12WS SYT10-12HG NC/12V 46 6 NC
NC(PANEL_PWR)/12V 47 5 NC
NC(PANEL_ON)/12V 48 4 NC
NC(ABL_HOT2)/12V 49 3 NC
CN1002 NC(ABL_HOT1)/12V 50 2 NC
USB 14 1 WIFI_USB_M NC(ABL_HOT0)/12V 51 1 NC
USB Cable(UL2725) USB 15 2 WIFI_USB_P 1-842-546-21 1-819-812-11
Wifi/BT GND 1 5 #30 USB 12 3 WIFI_GND FFC Direct Connector :IPEX JAE/FI-RE51S-HF
RST_L 2 2 #30 USB 8 4 WIFI_STBY_3.3V or Yamaichi 1-843-107-12
FY16 WOW_L 3 4 #30 USB 7 5 WIFI_STBY_3.3V
WOBT1_L 4 6 #30 CN3600 To BMFL
GND 5 7 #30 1-821-119-11 1-821-145-11 NC_HTPDN1/ELTIMO3/POWER_ON 1 41
VCC 6 1 #30 SYT10-05HG JAM SYT10-05WL NC/LOCKN1/ABL_PHT/READY 2 40
VCC 7 5 1 BLK#28 NC/SDA/PANEL_ERROR/PANEL ON 3 39
VCC 8 4 1 RED#28 NC/SCL/PANEL ERROR 4 38
GND 9 9 #30 CN1003 SPI_CS 5 37 NC (SPI_CS)
WOBT2_L 10 10 #30 1 WIFI_STBY_3.3V SPI_CK 6 36 NC (SPI_CK)
VSYNC 11 8 #30 2 WIFI_USB_M NC/RESETX 7 35
GND 12 3 1 Shield 3 WIFI_USB_P NC 8 34
GND 13 11 #30 4 NC NC 9 33
DM 14 1 1 WHT#28 5 WIFI_STBY_3.3V NC 10 32
DP 15 2 1 GRN#28 Shell WIFI_GND NC 11 31
1-819-332-11 1-819-502-11 1-822-425-31 VCA/(SPI_SEL0) 12 30 NC
JST SM15B-GHS-TB(LF)(SN)
GHR-15V-S ACON USB mini-AB BUS_SW 13 29 NC
SPI_DI/(WDT) 14 28 NC
SPI_DO 15 27 NC
SPI_ENB 16
FFC 41P 26 NC
GND 17 25 GND
BT VBTX15P 18 24 RxP15
Antena VBTX15N 19 23 RxN15
GND 20 22 GND
VBTX14P 21 21 RxP14
VBTX14N 22 20 RxN14
GND 23 19 GND
VBTX13P 24 18 RxP13 J110
VBTX13N 25 17 RxN13 GND Ground 1 23 AWG#22
PSJ
GL1Board
Board GND 26 16 GND GND Ground 2 24 AWG#22
VBTX12P 27 15 RxP12 PWR Power V12 IN 3 NC
VBTX12N 28 14 RxN12 PWR Power V12 IN 4 25 AWG#22
GND 29 13 GND PWR Power V12 IN 5 27 AWG#22
CN6401 VBTX11P 30 12 RxP11 1-822-322-11 1-820-264-11
1-842-551-11 VBTX11N 31 11 RxN11 JST SM05B-PASS-TBT(LF)(SN) PAP-05V-S
SJM20-28WLB/JAM CN9000 GND 32 10 GND
BLINKING 1 28 NC 30 STBY_3.3V_OUT VBTX10P 33 9 RxP10
PWM1_DIMMER 2 27 NC 29 FB_REF VBTX10N 34 8 RxN10
DC_DIMMER 3 26 1 28 BLINKING GND 35 7 GND
PWM2_DIMMER 4 25 2 27 PWM1_DIMMER VBTX9P 36 6 RxP9
STBY3.3V 5 24 #22 3 26 DC_DIMMER VBTX9N 37 5 RxN9
PWM3_DIMMER 6 23 4 25 PWM2_DIMMER GND 38 4 GND
BL_ON 7 22 #22 5 24 STBY_3.3V_IN VBTX8P 39 3 RxP8
BL_ERR 8 21 6 23 PWM3_DIMMER VBTX8N 40 2 RxN8
POWER_ON 9 20 7 22 BL_ON/ICSPCLK GND 41 1 GND
GND 10 19 #22 8 21 BL_ERR 1-843-699-11 1-819-564-11
GND 11 NC 9 20 POWER_ON/ICSPDAT FFC Direct Connector :IPEX JAE/FI-RE41S-HF
GND 12 17 #22 #22 10 19 GND or Yamaichi 1-843-708-12
REG12V 13 16 #22 NC 18 GND
REG12V 14 15 #22 #22 12 17 GND
REG12V 15 14 #22 #22 13 16 REG_19V_12V
REG12V 16 13 #22 #22 14 15 REG_19V_12V
REG12V 17 12 #22 #22 15 14 REG_19V_12V_Audio
REG12V 18 11 #22 #22 16 13 REG12V
GND 19 10 #22 #22 17 12 REG_19V_12V_Audio
GND 20 9 #22 #22 18 11 REG_12V
GND 21 8 #22 #22 19 10 GND
GND 22 7 #22 #22 20 9 GND
GND 23 1 #22 #22 21 8 GND
GND 24 2 #22 #22 22 7 GND
TCON_VCC12V 25 4 #22 5 6 DC_DET_VTH/LD_MODE_SW
TCON_ON 26 3 6 5 GND
TCON_VCC12V 27 5 #22 NC 4 T-CON_VCC12V(NC)
TCON_VCC12V 28 NC 26 3 T-CON_ON
SJM20-28HG NC 2 T-CON_VCC12V
1-842-598-11 NC 1 VPP_PIG
1-843-925-11 1-843-917-11
PBDP-30V-S JST SM30B-PBDSS-TF

CN6101
SFP79-02WLB JAM
1-822-908-11
AC-N 1
AC-L 2 AC pigtail

CN4 CN3
1-822-363-11 1-822-359-11
53426-0810 Molex 53426-0410 Molex
1 -OUT1-1 +OUT1 1
2 -OUT1-2 +OUT2 2
3 -OUT2-1 +OUT3 3
4 -OUT2-2 +OUT4 4
5 -OUT3-1
6 -OUT3-2 To LS
7 -OUT4-1
8 -OUT4-2

CN7707
1 1 SP_MAIN_RP
2 2 SP_MAIN_RN
2 3 SP_MAIN_LN
1 4 SP_MAIN_LP
1-842-593-11 1-842-566-12
PBVP04V-S SM04B-PBVSS-TB(LF)(SN)(PS)

SPEAKER L+ 1 4 #22
Front L- 2 3 #22
Lch JST SMP-02VF-N
1-784-991-21

SPEAKER R+ 1 1 #22
Front R- 2 2 #22
Rch JST SMP-02VF-N
1-784-991-21
DIAGRAMS

61
 DIAGRAMS

BOARDS LOCATION

XBR-55X850D/857D XBR-65X850D/855D/857D

SMART CORE (S) BMFW2 SWITCH UNIT GL1 SMART CORE (S) BMFW2 SWITCH UNIT

SMART CORE (S)

WLAN / BT MODULE(11AC)

HSC4-S

XBR-55X850D/857D, 65X850D/855D/857D 62
WIRE DRESSING
OVERVIEW

XBR-55X850D/857D XBR-65X850D/855D/857D

VA Tape x17 VA Tape x15

・Fix wire ・Fix wire

Harness Tie x3 Harness Tie x3

• Fix wire • Fix wire

Slide Clamp x1 Slide Clamp x1

• Hold wires • Hold wires

XBR-55X850D/857D, 65X850D/855D/857D 63
PANEL HANDLING
PANEL HANDLING PROHIBITED AREA

Please do not touch red area (T-CON& LD Area) and glass(Screen), when you hold a panel.

XBR-55X850D/857D XBR-65X850D/855D/857D

Prohibited
area
Prohibited
area Prohibited
area

XBR-55X850D/857D, 65X850D/855D/857D 64
DISASSEMBLY
• There are clutch in the yellow frame[ ]. Therefore please be careful in the case of the disassembly or assembly of parts.

1. XBR-55X850D/857D
1-1. STAND

1 2

4 Screws (SCREW, +PSW M5 X12)

P/N: 2-580-607-01

STAND REAR COVER

3 4
2 Screws (SCREW, PSW M6 X16)
P/N: 2-580-611-01
STAND NECK

STAND

XBR-55X850D/857D, 65X850D/855D/857D 65
 DISASSEMBLY

1. XBR-55X850D/857D
1-2. LABEL, REAR TERMINAL (PDT M1)

LABEL, REAR TERMINAL (PDT M1)

XBR-55X850D/857D, 65X850D/855D/857D 66
 DISASSEMBLY

1. XBR-55X850D/857D
1-3. REAR COVER (M1_L_PDT) A

If the above ”Handling prohibition area” is held during assembling process of RC,
2 screws (SCREW, +PSW M4X10) P/N: 4-159-298-01
it easily curves and consequently the hook might not be engaged properly.
2 screws (SCREW, ORNAMENTAL M6X12) P/N: 4-268-126-02
Also, you might touch to the speaker corn if you hold the SP grill portion.
3 screws (SCREW +BVTP 3X10 TYPE2 IT-3) P/N: 7-685-647-79
However , this is not the case when you disassemble the RC. (Please refer to Appendix-1)
13 screws (SCREW M3X3.0 STEP) P/N: 4-579-926-01

2 3
REAR COVER (M1_L_PDT) A

XBR-55X850D/857D, 65X850D/855D/857D 67
 DISASSEMBLY

1. XBR-55X850D/857D
1-4. BRACKET, VESA (L_PDT)

1 2

*Inner side view of Rear Cover

Screw (SCREW +BVTP 3X8 TYPE2 IT-3) P/N: 7-685-646-79

BRACKET, VESA (L_PDT)

3

XBR-55X850D/857D, 65X850D/855D/857D 68
 DISASSEMBLY

1. XBR-55X850D/857D
1-5. BRACKET, DC JACK (PDT)

BRACKET, DC JACK (PDT)

2 3

XBR-55X850D/857D, 65X850D/855D/857D 69
 DISASSEMBLY

1. XBR-55X850D/857D
1-6. TAPE

1 2 3 4

TAPE
TAPE
TAPE

TAPE

XBR-55X850D/857D, 65X850D/855D/857D 70
 DISASSEMBLY

1. XBR-55X850D/857D
1-7. TAPE AND SP-BOX ASSY, W25 (L)-E

TAPE

2 3 4

SP-BOX ASSY, W25 (L)-E

XBR-55X850D/857D, 65X850D/855D/857D 71
 DISASSEMBLY

1. XBR-55X850D/857D
1-8. TAPE

TAPE

TAPE
TAPE

XBR-55X850D/857D, 65X850D/855D/857D 72
 DISASSEMBLY

1. XBR-55X850D/857D
1-9. TAPE

TAPE
TAPE TAPE

XBR-55X850D/857D, 65X850D/855D/857D 73
 DISASSEMBLY

1. XBR-55X850D/857D
1-10. SP-BOX ASSY, W25 (L)-E

2 3

SP-BOX ASSY, W25 (L)-E

XBR-55X850D/857D, 65X850D/855D/857D 74
 DISASSEMBLY

1. XBR-55X850D/857D
1-11. TAPE AND BT ANTENNA
1 2

TAPE
TAPE

3 4 5 6

BT ANTENNA

Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11

XBR-55X850D/857D, 65X850D/855D/857D 75
 DISASSEMBLY

1. XBR-55X850D/857D
1-12. TAPE

1 2

TAPE

3 4 5

TAPE

XBR-55X850D/857D, 65X850D/855D/857D 76
 DISASSEMBLY

1. XBR-55X850D/857D
1-13. WIRE DRESSING

XBR-55X850D/857D, 65X850D/855D/857D 77
 DISASSEMBLY

1. XBR-55X850D/857D NOTE:
1-14. SMART CORE (S)

ForThis
For This
Model
Model

1 2 3
SMART CORE (S)

HARNESS ASSY (MAIN)

2 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11

XBR-55X850D/857D, 65X850D/855D/857D 78
 DISASSEMBLY

1. XBR-55X850D/857D
1-15. SWITCH UNIT (SM-G-WW) AND HARNESS ASSY (MAIN)

1 2

3 4 5 HARNESS ASSY (MAIN)

P/N: 1-910-110-91

HARNESS ASSY (MAIN)

SWITCH UNIT (SM-G-WW)

XBR-55X850D/857D, 65X850D/855D/857D 79
 DISASSEMBLY

1. XBR-55X850D/857D
1-16. HOLDER SIDE SW(PDT M1)

Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11

HOLDER SIDE SW(PDT M1)

2 3

XBR-55X850D/857D, 65X850D/855D/857D 80
 DISASSEMBLY

1. XBR-55X850D/857D
1-17. TAPE AND WIRE DRESSING AND CONNECTOR ASSY 30P

1 2
TAPE

3 4 5

CONNECTOR ASSY 30P

P/N: 1-910-110-92

XBR-55X850D/857D, 65X850D/855D/857D 81
 DISASSEMBLY

1. XBR-55X850D/857D
1-18. PULLEY, STAND (HWI)

PULLEY, STAND (HWI) P/N: 4-534-964-01 PULLEY, STAND (HWI) P/N: 4-534-964-01

XBR-55X850D/857D, 65X850D/855D/857D 82
 DISASSEMBLY

1. XBR-55X850D/857D
1-19. TAPE AND FLEXIBLE FLAT CABLE 41P

1
TAPE

2 3 FLEXIBLE FLAT CABLE 41P

P/N: 1-849-277-11

XBR-55X850D/857D, 65X850D/855D/857D 83
 DISASSEMBLY

1. XBR-55X850D/857D
1-20. FLEXIBLE FLAT CABLE 51P AND SLIDE, CLAMP

1 2

SLIDE, CLAMP

FLEXIBLE FLAT CABLE 51P

1 2
P/N: 1-849-280-11

XBR-55X850D/857D, 65X850D/855D/857D 84
 DISASSEMBLY

1. XBR-55X850D/857D
1-21. BRACKET, SIDE (PDT M1)

2 3
BRACKET, SIDE (PDT M1)

XBR-55X850D/857D, 65X850D/855D/857D 85
 DISASSEMBLY

1. XBR-55X850D/857D
1-22. BRACKET, TOP FL (MOLD) (CO1 ONLY)

2 3

BRACKET, TOP FL (MOLD)

XBR-55X850D/857D, 65X850D/855D/857D 86
 DISASSEMBLY

1. XBR-55X850D/857D
1-23. BMFW2

9 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11

2 3 BMFW2

XBR-55X850D/857D, 65X850D/855D/857D 87
 DISASSEMBLY

1. XBR-55X850D/857D
1-24. SHEET, THERMAL(BM)

SHEET, THERMAL(BM)

XBR-55X850D/857D, 65X850D/855D/857D 88
 DISASSEMBLY

1. XBR-55X850D/857D
1-25. PLATE, MAIN(PDT M1)

6 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11

2 3 4

PLATE, MAIN(PDT M1)

XBR-55X850D/857D, 65X850D/855D/857D 89
 DISASSEMBLY

1. XBR-55X850D/857D
1-26. LABEL, SIDE TERMINAL (PDT M1) AND BRACKET, VESA (MIA)

When you do panel replacement, please also replace this part at the same time to a new one.

LABEL, SIDE TERMINAL (PDT M1)

P/N:4-583-384-01 (UC2)
4-583-384-11 (LA1)
4-583-384-31 (CO1)
Caution: Don’t damage to LABEL. Scratch, deform, dirty etc....

1 2 3 4 BRACKET, VESA (MIA)

2 screws (SCREW, +PSW M4X10) P/N: 4-159-298-01

XBR-55X850D/857D, 65X850D/855D/857D 90
 DISASSEMBLY

1. XBR-55X850D/857D
1-27. SCREW AND LCD PANEL

1 2
LCD PANEL

5 screws (SCREW M3X3.0 STEP) P/N: 4-579-926-01

XBR-55X850D/857D, 65X850D/855D/857D 91
 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-1. STAND

1 2

4 Screws (SCREW, +PSW M5 X12)

P/N: 2-580-607-01

STAND REAR COVER

3 4
2 Screws (SCREW, PSW M6 X16)
P/N: 2-580-611-01
STAND NECK

STAND

XBR-55X850D/857D, 65X850D/855D/857D 92
 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-2. LABEL, REAR TERMINAL (PDT M1) AND AC COVER(PDT 2L)

LABEL, REAR TERMINAL (PDT M1)

1 2 3 AC COVER(PDT 2L)

Screw (SCREW M3X3.0 STEP) P/N: 4-579-926-01

XBR-55X850D/857D, 65X850D/855D/857D 93
 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-3. POWER-SUPPLY CORD

POWER-SUPPLY CORD (WITH CONN.)

P/N: 1-849-274-21 (UC2/LA1/CO1)
2 3
1-839-695-21 (LA8)

XBR-55X850D/857D, 65X850D/855D/857D 94
 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-4. REAR COVER (M1_2L_PDT) A

4 screws (SCREW, ORNAMENTAL M6X12) P/N: 4-268-126-02 If the above ”Handling prohibition area” is held during assembling process of RC,
3 screws (SCREW +BVTP 3X10 TYPE2 IT-3) P/N: 7-685-647-79 it easily curves and consequently the hook might not be engaged properly.
13 screws (SCREW M3X3.0 STEP) P/N: 4-579-926-01 Also, you might touch to the speaker corn if you hold the SP grill portion.
However , this is not the case when you disassemble the RC. (Please refer to Appendix-1)

2 3

REAR COVER (M1_2L_PDT) A

XBR-55X850D/857D, 65X850D/855D/857D 95
 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-5. TAPE

1 2 3 4

TAPE
TAPE
TAPE
TAPE

XBR-55X850D/857D, 65X850D/855D/857D 96
 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-6. TAPE

TAPE

TAPE

TAPE

TAPE

XBR-55X850D/857D, 65X850D/855D/857D 97
 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-7. WIRE DRESSING AND SP-BOX ASSY, W25(L)-E

2 3 4

SP-BOX ASSY, W25(L)-E

XBR-55X850D/857D, 65X850D/855D/857D 98
 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-8. TAPE AND WIRE DRESSING

1
TAPE

2 3 TAPE

XBR-55X850D/857D, 65X850D/855D/857D 99
 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-9. SP-BOX ASSY, W25(L)-E

2 3

SP-BOX ASSY, W25(L)-E

XBR-55X850D/857D, 65X850D/855D/857D 100

 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-10. TAPE

TAPE

TAPE

XBR-55X850D/857D, 65X850D/855D/857D 101

 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-11. BT ANTENNA

2 3 4 BT ANTENNA

Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11

XBR-55X850D/857D, 65X850D/855D/857D 102

 DISASSEMBLY

2. XBR-65X850D/855D/857D NOTE:
2-12. SMART CORE (S)

ForThis
For This
Model
Model

1 2 3
SMART CORE (S)

HARNESS ASSY (MAIN)

2 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11

XBR-55X850D/857D, 65X850D/855D/857D 103

 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-13. SWITCH UNIT (SM-G-WW) AND HARNESS ASSY (MAIN)

1 2

HARNESS ASSY (MAIN)

3 4 5
SWITCH UNIT (SM-G-WW) P/N: 1-910-110-93

HARNESS ASSY (MAIN)

XBR-55X850D/857D, 65X850D/855D/857D 104

 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-14. HOLDER SIDE SW(PDT M1)

Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11

2 3 HOLDER SIDE SW(PDT M1)

XBR-55X850D/857D, 65X850D/855D/857D 105

 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-15. TAPE AND WIRE DRESSING AND CONNECTOR ASSY 28P

1 2

TAPE

TAPE

3 4 5
CONNECTOR ASSY 28P
P/N: 1-910-110-94

XBR-55X850D/857D, 65X850D/855D/857D 106

 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-16. PULLEY, STAND (HWI)

PULLEY, STAND (HWI) P/N: 4-534-964-01 PULLEY, STAND (HWI) P/N: 4-534-964-01

XBR-55X850D/857D, 65X850D/855D/857D 107

 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-17. GL1 AND SPACER(17)+C
1 2

6 screws (SCREW, +PSW M3X6 W12) P/N: 4-256-393-12

3 4 GL1
5

Remove “Spacer(17)+C” at hole Number ”1”.

XBR-55X850D/857D, 65X850D/855D/857D 108

 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-18. SHEET, INUSLATION (PDT 2L) AND CUSHION (PDT AC)

NOTE:

1 2 SHEET, INUSLATION (PDT 2L) 3 When you do panel replacement,

please also replace this part at the same time to a new one.

XBR-55X850D/857D, 65X850D/855D/857D 109

 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-19. TAPE AND FLEXIBLE FLAT CABLE 41P

TAPE

2 3
FLEXIBLE FLAT CABLE 41P
P/N: 1-849-278-11

XBR-55X850D/857D, 65X850D/855D/857D 110

 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-20. FLEXIBLE FLAT CABLE 51P AND SLIDE, CLAMP

FLEXIBLE FLAT CABLE 51P

1 2 P/N: 1-849-279-11

1 2

SLIDE, CLAMP

XBR-55X850D/857D, 65X850D/855D/857D 111

 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-21. BRACKET, SIDE (PDT M1)

2 3

BRACKET, SIDE (PDT M1)

XBR-55X850D/857D, 65X850D/855D/857D 112

 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-22. BRACKET, TOP FL (MOLD) (CO1 ONLY)

2 3

BRACKET, TOP FL (MOLD)

XBR-55X850D/857D, 65X850D/855D/857D 113

 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-23. BMFW2

9 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11

2 3
BMFW2

XBR-55X850D/857D, 65X850D/855D/857D 114

 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-24. SHEET, THERMAL(BM)

SHEET, THERMAL(BM)

XBR-55X850D/857D, 65X850D/855D/857D 115

 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-25. PLATE, MAIN(PDT M1)

6 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11

2 3 4

PLATE, MAIN(PDT M1)

XBR-55X850D/857D, 65X850D/855D/857D 116

 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-26 LABEL, SIDE TERMINAL (PDT M1) AND BRACKET, VESA(MIA)

When you do panel replacement, please also replace this part at the same time to a new one.

LABEL, SIDE TERMINAL (PDT M1)

P/N: 4-583-384-01 (UC2)
4-583-384-11 (LA1)
4-583-384-31 (LA8/CO1)

Caution: Don’t damage to LABEL. Scratch, deform, dirty etc....

1 2 3 4 BRACKET, VESA(MIA)

4 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11

XBR-55X850D/857D, 65X850D/855D/857D 117

 DISASSEMBLY

2. XBR-65X850D/855D/857D
2-27. SCREW AND TAPE AND LCD PANEL

1 2 When you do panel replacement,

please also replace this part at the same time to a new one.

TAPE

6 screws (SCREW M3X3.0 STEP) P/N: 4-579-926-01

LCD PANEL

XBR-55X850D/857D, 65X850D/855D/857D 118

 DISASSEMBLY

3. SMART CORE (S)

3-1. BRACKET, WIFI ASSY
1

2 3
BRACKET, WIFI ASSY

XBR-55X850D/857D, 65X850D/855D/857D 119

 DISASSEMBLY

3. SMART CORE (S)

3-2. WLAN / BT MODULE(11AC) AND BRACKET, WIFI

NOTE:
1

2
BRACKET, WIFI
NOTE:

For This
Model

WLAN / BT MODULE(11AC)

XBR-55X850D/857D, 65X850D/855D/857D 120

 DISASSEMBLY

3. SMART CORE (S)

When you do TOP COVER replacement, please also replace this part at the same time to a new one.
3-3. COVER, TOP
SHEET, IR NOISE P/N: 4-590-730-01
60 x 13 (t0.2)

Datum: edge of cover top

Datum: edge of cover top hole

1 2 3

COVER, TOP

XBR-55X850D/857D, 65X850D/855D/857D 121

 DISASSEMBLY

3. SMART CORE (S)

3-4. HSC4-S

1 2

3
NOTE:

HSC4-S

XBR-55X850D/857D, 65X850D/855D/857D 122

 DISASSEMBLY

3. SMART CORE (S)

3-5. PANEL, ORNAMENT

1 2 3

PANEL, ORNAMENT

Sequence Information

XBR-55X850D/857D, 65X850D/855D/857D 123

 DISASSEMBLY

3. SMART CORE (S)

3-6. GUIDE, LIGHT AND CASE, BTM (S)

1 2

3 4

GUIDE, LIGHT
CASE, BTM (S)

XBR-55X850D/857D, 65X850D/855D/857D 124

EXPLODED VIEWS
• Items with no part number and no description are not stocked because they are seldom required for routine service.
• The construction parts of an assembled part are indicated with a collation number in the remark column.
• Items marked " * " are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items.

1. XBR-55X850D/857D
REAR COVER REF. No. PART No. DESCRIPTION MARK
1 4-583-592-01 LABEL, REAR TERMINAL (PDT M1) UC2
1 4-583-593-01 LABEL, REAR TERMINAL (PDT M1) LA1/CO1
2 4-584-426-11 REAR COVER (M1_L_PDT) A UC2/LA1
2 4-584-426-01 REAR COVER (M1_L_PDT) A CO1
* 3 4-579-927-01 BRACKET, VESA(L_PDT)
4 1-859-138-11 SP-BOX ASSY, W25(L)-E
5 4-580-890-01 BRACKET, DC JACK (PDT)
6 1-754-957-11 BT ANTENNA

5 1
2

XBR-55X850D/857D, 65X850D/855D/857D 125

 EXPLODED VIEWS

1. XBR-55X850D/857D
LCD PANEL REF. No. PART No. DESCRIPTION MARK
51 4-580-885-31 BRACKET, SIDE (PDT M1) CO1
51 4-580-885-01 BRACKET, SIDE (PDT M1) UC2
51 4-580-885-11 BRACKET, SIDE (PDT M1) LA1
52 A-2094-434-A COMPL SVC BMFW2_UC_S UC2
52 A-2094-435-A COMPL SVC BMFW2_MX_C LA1
52 A-2094-432-A COMPL SVC BMFW2_CO_CI_C CO1
53 4-583-384-01 LABEL, SIDE TERMINAL (PDT M1) UC2
57 53 4-583-384-31 LABEL, SIDE TERMINAL (PDT M1) CO1
57 53 4-583-384-11 LABEL, SIDE TERMINAL (PDT M1) LA1
54 1-798-511-22 SWITCH UNIT (SM-G-WW)
55 4-580-869-01 HOLDER SIDE SW(PDT M1)
58 53 * 56 2-650-770-21 SLIDE, CLAMP
* 57 4-486-590-01 BRACKET, VESA(MIA)
58 1-812-193-11 LCD PANEL(W55QWMEB) UC2
58 1-812-192-11 LCD PANEL(W55QWMES) LA1/CO1
59 4-546-441-11 BRACKET, TOP FL (MOLD) CO1

55 59
51
54

56

SMART CORE (S)

52

XBR-55X850D/857D, 65X850D/855D/857D 126

 EXPLODED VIEWS

1. XBR-55X850D/857D
CONNECTORS

104 102 101

103

REF.NO. PART No. DESCRIPTION MARK

101 1-849-277-11 FLEXIBLE FLAT CABLE 41P CN3600(BMFW2)-TCON (1)
102 1-849-280-11 FLEXIBLE FLAT CABLE 51P CN3600(BMFW2)-TCON (1)
103 1-910-110-91 HARNESS ASSY (MAIN) CN1001(BMFW)-CN001(HSC4)-WIFI-SM (1)
104 1-910-110-92 CONNECTOR ASSY 30P CN4001(LD)-CN9000(BMFW2)-TCON-KT/CN003(KT)-SP (1)

XBR-55X850D/857D, 65X850D/855D/857D 127

 EXPLODED VIEWS

1. XBR-55X850D/857D
SCREWS

REF. DESCRIPTION PART No.

SCREW +PSW M4X10 4-159-298-01

SCREW +BVTP 3X10 TYPE2 IT-3 7-685-647-79
SCREW, +PSW M3X6 4-472-518-11
SCREW M3X3.0 STEP 4-579-926-01
SCREW, ORNAMENTAL M6X12 4-268-126-02

XBR-55X850D/857D, 65X850D/855D/857D 128

 EXPLODED VIEWS

2. XBR-65X850D/855D/857D
REAR COVER REF. No. PART No. DESCRIPTION MARK
201 4-583-592-01 LABEL, REAR TERMINAL (PDT M1) UC2
201 4-583-593-01 LABEL, REAR TERMINAL (PDT M1) LA8/CO1/LA1
202 4-584-432-01 REAR COVER (M1_2L_PDT) A CO1
202 4-584-432-11 REAR COVER (M1_2L_PDT) A UC2/LA1/LA8
203 4-579-996-01 AC COVER(PDT 2L)
204 1-839-695-21 POWER SUPPLY CORD (WITH CONN.) LA8
204 1-849-274-21 POWER-SUPPLY CORD (WITH CONN.) UC2/LA1/CO1
205 1-859-138-11 SP-BOX ASSY, W25(L)-E
206 1-754-949-11 BT ANTENNA

205

205

201

202

206
203

204

XBR-55X850D/857D, 65X850D/855D/857D 129

 EXPLODED VIEWS

2. XBR-65X850D/855D/857D
LCD PANEL REF. No. PART No. DESCRIPTION MARK
251 4-580-885-01 BRACKET, SIDE (PDT M1) UC2
251 4-580-885-11 BRACKET, SIDE (PDT M1) LA1
251 4-580-885-31 BRACKET, SIDE (PDT M1) LA8/CO1
252 A-2094-432-A COMPL SVC BMFW2_CO_CI_C CO1
252 A-2094-433-A COMPL SVC BMFW2_LA_C LA8
252 A-2094-434-A COMPL SVC BMFW2_UC_S UC2
252 A-2094-435-A COMPL SVC BMFW2_MX_C LA1
259
253 4-583-384-01 LABEL, SIDE TERMINAL (PDT M1) UC2
259
253 4-583-384-11 LABEL, SIDE TERMINAL (PDT M1) LA1
253 4-583-384-31 LABEL, SIDE TERMINAL (PDT M1) LA8/CO1
260 254 1-798-511-22 SWITCH UNIT (SM-G-WW)
255 4-580-869-01 HOLDER SIDE SW(PDT M1)
* 256 2-650-770-21 SLIDE, CLAMP
253 257 1-474-642-11 GL1(CH)-STATIC CONVERTER(TV)
261 258 4-580-889-01 SHEET, INUSLATION (PDT 2L)
255 * 259 4-486-590-01 BRACKET, VESA(MIA)
260 1-812-194-11 LCD PANEL(W65QWMEB)
254 261 4-546-441-11 BRACKET, TOP FL (MOLD) CO1

259
251
256

259

SMART CORE (S) 252

258
257

XBR-55X850D/857D, 65X850D/855D/857D 130

 EXPLODED VIEWS

2. XBR-65X850D/855D/857D
CONNECTORS

304 302 301

303

REF.NO. PART No. DESCRIPTION MARK

301 1-849-278-11 FLEXIBLE FLAT CABLE 41P CN3600(BMFW2)-TCON (1)
302 1-849-279-11 FLEXIBLE FLAT CABLE 51P CN3600(BMFW2)-TCON (1)
303 1-910-110-93 HARNESS ASSY (MAIN) CN1001(BMFW)-CN001(HSC4)-WIFI-SM (1)
304 1-910-110-94 CONNECTOR ASSY 28P CN6401(GL1)-CN9000(BMFW2)-TCON-KT/CN003(KT)-SP (1)

XBR-55X850D/857D, 65X850D/855D/857D 131

 EXPLODED VIEWS

2. XBR-65X850D/855D/857D
SCREWS

REF. DESCRIPTION PART No.

SCREW +PSW M4X10 4-159-298-01

SCREW +BVTP 3X10 TYPE2 IT-3 7-685-647-79
SCREW, +PSW M3X6 4-472-518-11
SCREW M3X3.0 STEP 4-579-926-01
SCREW, ORNAMENTAL M6X12 4-268-126-02
SCREW, +PSW M3X6 W12 4-256-393-12

XBR-55X850D/857D, 65X850D/855D/857D 132

 EXPLODED VIEWS

3. SMART CORE (S)

REF. No. PART No. DESCRIPTION MARK
401 4-580-149-01 PANEL, ORNAMENT
402 A-2092-887-A HSC4-S MOUNT
403 4-580-146-01 CASE, BTM (S)
404 4-580-150-01 GUIDE, LIGHT
405 4-580-151-02 COVER, TOP
406 4-547-397-02 BRACKET, WIFI
407
407 1-458-853-11 WLAN/BT MODULE(11AC)

406

405

404

403

402

401

XBR-55X850D/857D, 65X850D/855D/857D 133

 EXPLODED VIEWS

4. OTHER PART
MISCELLANEOUS ACCESSORIES

PART No. DESCRIPTION MARK PART No. DESCRIPTION MARK

4-534-964-01 PULLEY, STAND (HWI) 1-493-127-11 REMOTE COMMANDER (RMF-TX200U) UC2
4-535-586-02 BADGE, XBR LOGO(H3.7) For Black 1-493-127-21 REMOTE COMMANDER (RMF-TX200U) LA1
4-535-586-12 BADGE, XBR LOGO(H3.7) For Silver 1-493-128-11 REMOTE COMMANDER (RMF-TX200B) LA8/CO1
4-549-186-01 SHEET, THERMAL(BM) 1-493-002-13 AC ADAPTOR (160W) For 55"
4-587-424-01 SPACER(17)+C For 65" 1-785-504-21 ADAPTOR, CONVERSION LA8
4-588-110-01 CUSHION (PDT AC) For 65" 1-845-283-21 IR BLASTER UC2/LA1
7-600-031-97 TAPE (3M 1350FB-1)15MMX66M BLK * 1-848-803-12 RCA CONVERSION CABLE LA1/LA8/CO1
* 4-547-493-01 HEAT, SINK (MUFF) 1-846-425-13 CORD SET, POWER-SUPPLY For 55"
* 4-548-743-01 HOLDER, HS WS (MUF) 4-262-708-04 CLAMPER, CABLE
* 4-549-188-01 HOLDER(HS MUF) * 4-584-788-11 REFERENCE GUIDE UC2
* 4-563-516-01 HEAT SINK(MUFF CP) * 4-584-805-31 REFERENCE GUIDE LA1
* 7-600-040-44 ADHESIVE (SV380C) 333CC GRY * 4-584-959-31 REFERENCE GUIDE LA8/CO1

4-579-486-01 STAND (L PDT) A For 55"

4-579-484-01 STAND REAR COVER (L PDT) A For 55"
4-579-499-01 STAND NECK (L PDT) A For 55"
4-579-499-11 STAND NECK (L PDT) A For 65"
4-579-506-01 STAND REAR COVER (2L PDT) A For 65"
4-579-508-01 STAND (2L PDT) A For 65"

4-462-871-02 BAG, SCREW A (CCT)

(2-580-607-01) (SCREW, +PSW M5X12) (4 pcs)
4-585-682-01 BAG,SCREW (M6L16)(4)(PDT_L)
(2-580-611-01) (SCREW, +PSW M6X16) (4 pcs)

XBR-55X850D/857D, 65X850D/855D/857D 134

END

English
2016AL08-Data
Made in Japan
9-888-587-01 Sony Visual Products Inc. © 2016. 1
XBR-55X850D/857D, 65X850D/855D/857D 135
APPENDIX-1
HOW TO TAKE OFF A REAR COVER

Push the Rear Cover to up direction after pull up the reflector structure on Rear Cover slightly.
You can disassemble Rear Cover by sliding.

XBR-55X850D/857D, 65X850D/855D/857D 136