D-VXR-OE-01

Exam Name: Dell VxRail Operate v2 Exam

Full version: 297 Q&As

Full version of D-VXR-OE-01 Dumps

Share some D-VXR-OE-01 exam dumps below.

1. A VxRail administrator wants to rename the VxRail cluster and the VxRail vSAN datastore.
What is the recommended method to make these changes?
A. Refer to the VMvvare vSphere and vSAN documentation Follow the steps detailed in the
VMware documentation
B. Renaming the objects is not permitted Rebuild the cluster with the desired names
C. Use SolVe to generate the relevant procedures Follow the steps detailed in the procedures
D. Refer to the VxRail Appliance Administration Guide Follow the steps detailed in the guide
Answer: B

2. Cable VxRail NIC ports to ToR switches.

3. SIMULATION
A VxRail administrator is planning a maintenance activity. The customer has a 2 hour
maintenance window and wants to avoid unnecessary vSAN re-synchronization during this time.
Use the simulator to prepare the system for maintenance mode.
Answer:
To prepare the system for maintenance mode and avoid unnecessary vSAN re-synchronization,
follow these steps:
Log in to vSphere Client:
Open the vSphere Client.
Enter the username: [email protected].
Enter the password: VMw@r3!123.
Click Login.
Navigate to the Host:
In the vSphere Client interface, navigate to Hosts and Clusters. Expand the VxRail-DC and then
the VxRail-Cluster. Select the Host for Maintenance:
Select the host you plan to put into maintenance mode (e.g., vcluster730-esx01.edu.local,
vcluster730-esx02.edu.local, etc.).
Enter Maintenance Mode:
Right-click on the selected host and select Enter Maintenance Mode.
In the Enter Maintenance Mode window, you will have several options for vSAN data migration.
To avoid unnecessary re-synchronization, choose Ensure Accessibility.
Ensure Accessibility: This option makes sure that the data remains accessible during
maintenance but does not immediately trigger full data migration. It is the best choice to avoid
unnecessary re-synchronization during a short maintenance window.
Confirm Maintenance Mode:
Click OK to confirm the selection and put the host into maintenance mode.
Verify the Host Status:
Monitor the status to ensure the host enters maintenance mode without triggering excessive re-
synchronization.
Reference: VMware vSAN Maintenance Mode Options: vSAN Maintenance Mode
To summarize, selecting Ensure Accessibility when entering maintenance mode helps to avoid
unnecessary vSAN re-synchronization during the maintenance window. This method ensures
that data remains accessible and minimizes the impact on the cluster’s performance and
availability during the maintenance activity.

4. Cable VxRail PCIe ports to ToR switches

C. 1. Unassign the NDC adapters that are not required
5. What VxRail node related task can be performed with the VxRail Plugin?
A. Modify BIOS settings
B. Replace faulty Power Supply Unit
C. Replace faulty Network Interface Card
D. Modify iDRAC network settings
Answer: D

6. While creating a new VM on a vSAN datastore, an administrator did not assign a storage
policy.
What is the result?
A. VM will be created with the vSAN Default Storage Policy
B. VM will be created with FTT=0
C. VM will be created with RAID-1 (FTT=2)
D. VM will be created with Force Provisioning only
Answer: A

7. Topic 2, Performance Based Questions

You must use the VxRail Simulator to correctly answer questions in Part 2. The simulator allows
you to use the VxRail interface and configure many items. You are scored on your ability to
perform tasks, configure items, and gather information within the simulated environment.
SIMULATION
Task
An administrator is working with the VxRail Dell Support team and as part of the
troubleshooting, the admin has been instructed to temporarily remove the node with a serial
number of "V0730040000000" from the cluster.
User credentials are Username of
"[email protected]"
Password "VMw@r3!123".
Using the simulator, identify the correct node and remove it from the cluster.
Answer:
To temporarily remove a node with a specific serial number from the VxRail cluster, follow these
steps:
Log in to vSphere Client:
Open the vSphere Client.
Enter the username: [email protected].
Enter the password: VMw@r3!123.
Click Login.
Identify the Node with Serial Number "V0730040000000":
In the vSphere Client interface, navigate to the Hosts and Clusters view. Expand the VxRail-DC
and then the VxRail-Cluster. Locate the Node:
Click on each host (e.g., vcluster730-esx01, vcluster730-esx02, vcluster730-esx03,
vcluster730-esx04) and check the Summary tab to identify the node with the serial number
V0730040000000.
The Summary tab provides details about the hardware, including the serial number.
Put the Node in Maintenance Mode:
Right-click on the identified node.
Select Maintenance Mode > Enter Maintenance Mode.
Select Ensure Accessibility and click OK.
Remove the Node from the Cluster:
Once the node is in maintenance mode, right-click the node again.
Select Remove from Inventory.
Confirm the action by clicking Yes or OK when prompted.
Verify the Node Removal:
Ensure that the node is no longer listed under the VxRail-Cluster.
Check the overall health and status of the cluster to confirm that it is functioning properly without
the removed node.
Reference: Dell VxRail Administration Guide: VxRail Administration Guide
Note: Be cautious when removing nodes from a VxRail cluster, as this can impact the cluster's
capacity and redundancy. Always follow proper procedures and consult with Dell Support as
needed.

8. What authorization method is used tor VxRail API calls?

A. Auth
B. HTTP Basic
C. API Keys
D. OpenID Connect
Answer: B
Explanation:
The authorization method used for VxRail API calls is HTTP Basic. This method requires the
client to send the user’s credentials (username and password) encoded in Base64 within an
HTTP header. HTTP Basic authentication is straightforward and is supported by most HTTP
clients, making it a suitable choice for securing API calls in VxRail environments.
Reference: Dell VxRail API Documentation: VxRail API Documentation

9. What is the maximum number of disk groups supported by a VxRail P Series node?
A. 2
B. 3
C. 4
D. 5
Answer: C

10. Which VMware component is used to monitor VxRail cluster health?

A. vRealize Operations
B. vSAN Health Service
C. vSphere Health Check
D. vCenter Server
Answer: B

11. What is the maximum number of nodes supported in a VxRail cluster with 1 GbE
networking?
A. 12
B. 8
C. 4
D. 16
Answer: B

12. VxRail Manager provides a software stack for a software-defined data center.
Which layers are part of the stack?
A. Storage, security, and management
B. Security, management, and network
C. Network, storage, and security
D. Management, network, and storage
Answer: D

13. An administrator is trying to monitor vSAN backend IOPS, throughput, and latency in the
vSphere Client.
What must be turned on to monitor these metrics?
A. vSAN Disk Management
B. vSAN Performance Service
C. vSphere Distributed Resource Scheduler
D. vSAN Health Service
Answer: B

14. A company is planning to deploy VxRail and implement big data analytics solution with
these requirements:
- Supports both all-flash and all NVMe nodes
- Supports in-memory intensive database applications
- Configurable with 4 Intel Xeon scalable processor
Which VxRail model is recommended based on the deployment requirements?
A. S Series
B. G Series
C. D Series
D. P Series
Answer: D

15. What is the importance of VxRail Manager file-based backup?

A. It helps in quick restoration of system settings after a failure.
B. It provides additional storage for VMs.
C. It increases the speed of data transfer between nodes.
D. It enhances the security of data transmissions.
Answer: A

16. What API is used to perform tasks in a VxRail environment?

A. SOAP API
B. VxRail REST API
C. vSphere API
D. vSAN API
Answer: B

17. The VxRail administrator has been given the task of migrating the current production
environment to a VxRail cluster with external block storage. The VMs must remain online during
the migration.
Which VMware feature can be used?
A. Storage vMotion
B. vMotion
C. VMware Converter Software
D. High Availability
Answer: A

18. A customer has a large storage capacity and low I/O performance requirements.
Which VxRail solution is the best fit?
A. E Series
B. P Series
C. S Series
D. V Series
Answer: C

19. There is a request to add new disks to an existing VM residing on a VxRail vSAN that you
manage. One disk is 250 GB. The VM is using the vSAN default storage policy.
How many vSAN objects will be created?
A. 2
B. 3
C. 6
D. 9
Answer: D

20. Configure the new VDS - Add hosts, assign physical adapters, and assign port groups to
VMkernel adapters.
21. An environment has two VxRail Clusters with the following configuration
• Cluster-A is using FTT = 2 and FTM = Erasure Coding
• Cluster-B is using FTT = 2 and FTM = Mirroring
A 100 GB VM is planned to be vMotioned from Cluster-A to Cluster-B.
How much more vSAN capacity is consumed in Cluster-B than in Cluster-A?
A. 100 GB
B. 167 GB
C. 150 GB
D.0GB
Answer: B
Explanation:
To calculate the additional vSAN capacity consumed when a 100 GB VM is vMotioned from
Cluster-A to Cluster-B, consider the following:
Cluster-A: FTT = 2 and FTM = Erasure Coding (RAID 6), which uses approximately 1.5 times
the data size, thus 100 GB VM uses about 150 GB of vSAN capacity.
Cluster-B: FTT = 2 and FTM = Mirroring (RAID 1), which uses 3 times the data size, thus 100
GB VM uses 300 GB of vSAN capacity.
The difference in vSAN capacity consumed between Cluster-B and Cluster-A is: 300 GB
(Cluster-B) - 150 GB (Cluster-A) = 150 GB
So, Cluster-B consumes 150 GB more vSAN capacity than Cluster-A.
Reference: VMware vSAN Storage Policies: vSAN Storage Policies
22. An application consisting of two VMs must be keep on two separate hosts.
Which VMware feature would enable this?
A. Storage vMotion
B. Fault Tolerance
C. High Availability
D. Distributed Resource Scheduler
Answer: C

23. Configure the new VDS - Add hosts, assign physical adapters, and assign port groups to
VMkernel adapters.
24. How is dynamic resource scheduling achieved in a VxRail environment?
A. By setting static resource limits
B. Through automated load balancing
C. Via manual allocation during setup
D. Using third-party scheduling tools
Answer: B

25. What is involved in performing a VxRail Manager File-based Backup?

A. Exporting appliance configuration settings
B. Copying all VMs to a secondary storage
C. Backing up the entire vCenter database
D. Saving network configuration exclusively
Answer: A

26. What is a consideration when planning for node expansion of an existing 4-node All-Flash
Dell EMC VxRail 4.5.2xx cluster?
A. vSphere Web Client is used to perform the expansion procedure
B. New nodes can be hybrid or All-Flash
C. New nodes must be identical to the existing nodes
D. Expansion procedure is performed by Dell EMC or a Dell EMC partner
Answer: D

27. A VxRail administrator using the vSphere Client wants to manage the iDRAC configuration
of a node.
Which path should be followed?
A. Host > Configure > VxRail
B. Host > Monitor > VxRail
C. Cluster > Monitor > VxRail
D. Cluster > Configure > VxRail
Answer: A

28. What is a benefit of using a trusted third party or an organization CA in VxRail Manager?
A. Allows decrypted communication over trusted secured networks
B. Minimal client configuration for trust relationships
C. Secured trust relationship between internal and external servers
D. Eables secure digital trust network verification over unsecured networks
Answer: B

29. As a VxRail administrator you have been asked to configure vSAN fault domains After
selecting the VxRail cluster, where would you navigate to in vCenter to accomplish this task?
A. Configure > vSAN > Disk Management > Fault Domains & Stretched Cluster
B. Configure > vSAN > General > Fault Domains & Stretched Cluster
C. Configure > vSAN > Fault Domains & Stretched Cluster
D. Configure > vSAN > Configuration Assist > Fault Domains & Stretched Cluster
Answer: B

30. An administrator is generating a SolVe procedure to replace a failed disk in a VxRail node.
What is the order of the steps?
A. 1. Select the VxRail version
31. Create a VDS with the required number of uplinks.
B. 1. Configure the new VDS - Add hosts, assign physical adapters, and assign port groups to
VMkernel adapters.
32. An administrator needs to place a node in maintenance mode They want to ensure vSAN
does not start rebuilding absent components during the time it takes for maintenance to be
completed
What would allow the administrator to achieve this?
A. Temporarily disable components ^synchronization.
B. Temporarily set FTT=0 in vSAN Storage Policy.
C. Increase vSAN Object repair timer
D. Increase durability component lifetime.
Answer: C
Explanation:
To ensure that vSAN does not start rebuilding absent components while a node is in
maintenance mode, an administrator should increase the vSAN Object repair timer. The Object
repair timer controls the delay before vSAN initiates the rebuild of absent components. By
increasing this timer, the administrator can ensure that maintenance can be completed without
triggering unnecessary rebuilds, reducing the load on the system and preventing potential data
redundancy issues.
Reference: VMware vSAN Configuration Guide: vSAN Configuration Guide

33. Which VxRail model series supports only hybrid disks?

A. S Series
B. P Series
C. E Series
D. G Series
Answer: A

34. What is the order of steps to generate the SolVe procedure to add a capacity drive to a
VxRail node?

Answer:
35. What is a supported VxRail deployment?
A. External vCenter Server with internal DNS
B. External vCenter Server with customer-supplied Virtual Distributed Switch
C. Internal vCenter Server with customer-supplied Virtual Distributed Switch
D. Internal vCenter Server with hosts file
Answer: B

36. What primary role does the VxRail Manager Certificate play in a VxRail environment?
A. It manages the encryption of stored data.
B. It authenticates and secures communications between cluster nodes.
C. It schedules regular system audits and compliance checks.
D. It provides a user interface for system configuration.
Answer: B

37. A VxRail administrator has been tasked with configuring static LAG for a VxRail cluster
vSAN traffic. The ToR switches have already been configured.
Which VDS port group load balancing option should be configured?
A. Route based on physical NIC load
B. Route based on originating virtual port
C. Route based on IP hash
D. Route based on source MAC hash
Answer: C

38. How can the performance of a VxRail appliance be optimized?

A. By regularly updating the firmware
B. By minimizing the use of virtual machines
C. By optimizing the underlying storage configuration
D. All of the above
Answer: D

39. A company has deployed VxRail independent of an existing VMware environment. VxRail
hosts and VMs are configured into the organization's DNS server host records. The VxRail
deployed VDS is being used.
Which VxRail deployment model has been implemented by the company?
A. External vCenter with internal DNS
B. Internal vCenter with internal DNS
C. Internal vCenter with external DNS
D. External vCenter with external DNS
Answer: C

40. What are the vSAN storage policy settings applied to the VxRail Manager VM during initial
setup?
A. Primary level of failures to tolerate = 1 Failure tolerance method = Erasure coding Object
space reservation (%) = 100
B. Primary level of failures to tolerate = 1 Object space reservation (%) = 100
C. Primary level of failures to tolerate = 1 Failure tolerance method = Mirroring Object space
reservation (%) = 50
D. Primary level of failures to tolerate = 2 Failure tolerance method = Mirroring
Answer: B

41. What is the fault tolerance method provided by the default storage policy on a newly
deployed VxRail all-flash cluster?
A. RAID-5
B. RAID-1
C. RAID-6
D. RAID-1/10
Answer: B

42. An administrator is trying to replace the VxRail Manager Certificate.

Where in the vSphere Client is the option located?
A. Menu > VxRail > Configuration > Certificates
B. Cluster > Configure > VxRail > Certificate
C. Cluster > Configure > VxRail > Hosts
D. Menu > Administration > Certificates > Certificate Management
Answer: B

43. Input usage information (Serial numbers, etc.)

44. An administrator wants to perform maintenance on a VxRail system.
Which configuration should be used for the VxRail Cluster Health Monitoring before starting the
maintenance activity?
A. Maintenance mode
B. Disabled
C. Enabled
D. Suspended
Answer: B

45. An administrator wants to locate the PSNT for a specific VxRail node in order to contact
support. Where in the vSphere Client can this information be located?
A. Hosts and Clusters > Host > Configure > Advanced System Settings
B. Hosts and Clusters > Host > Monitor > VxRail > Physical View
C. Menu > VxRail
D. Menu > Administration
Answer: B

46. SIMULATION
VxRail administrator got the following warning while on node physical view.
"Health monitoring is currently disabled and information may not be accurate.
Dell recommends that health monitoring is enabled."
Use the simulator to enable the relevant service and resolve the issue.
Answer:
To resolve the issue of health monitoring being disabled and enable the relevant service, follow
these steps:
Log in to vSphere Client:
Open the vSphere Client.
Enter the username: [email protected].
Enter the password: VMw@r3!123.
Click Login.
Navigate to VxRail Manager:
In the vSphere Client interface, expand VxRail-DC and then VxRail-Cluster.
Select VxRail Manager.
Access VxRail Health Monitoring Settings:
Click on the Configure tab.
Under VxRail, select Health.
Enable Health Monitoring:
Find the option for Health Monitoring.
If it is disabled, click Edit or the relevant button to enable it.
Ensure that Enable Health Monitoring is checked.
Click Apply or OK to save the changes.
Verify Health Monitoring Status:
Go back to the Summary tab or the appropriate section in VxRail Manager.
Verify that the health monitoring status is now enabled and shows as healthy.
Steps using the Simulator:
Login to vSphere Client:
Open the simulator and navigate to the vSphere Client interface.
Log in using the credentials:
Username: [email protected].
Password: VMw@r3!123.
Navigate to VxRail Manager:
In the vSphere Client interface, expand VxRail-DC and then VxRail-Cluster.
Select VxRail Manager.
Enable Health Monitoring:
Click on the Configure tab.
Under VxRail, select Health.
Click Edit to modify the health settings.
Check the box for Enable Health Monitoring.
Click Apply or OK to save the changes.
Verify:
Go back to the Summary tab in VxRail Manager.
Ensure that the warning message about health monitoring being disabled is no longer present
and that health monitoring is active.
Reference: Dell VxRail Administration Guide: VxRail Administration Guide
By enabling health monitoring in VxRail Manager, you ensure that the system can accurately
monitor and report the health status of the nodes, helping to maintain system stability and
performance.

47. A user has three G Series nodes in a VxRail cluster. They are planning to add five additional
G Series nodes.
How much additional rack is required to accommodate the new nodes?
A. 1U
B. 2U
C. 5U
D. 10U
Answer: B

48. What is a consideration before removing a VxRail node from a cluster?

A. The node must be in Maintenance Mode.
B. The node must be disconnected.
C. Capacity Reserve must be enabled.
D. The cluster must have enough nodes remaining to support FTT.
Answer: D

49. What is the block size and object level of the vSAN deduplication algorithm?
A. 8 KB per datastore
B. 4 KB per disk group
C. 4 KB per datastore
D. 8 KB per disk group
Answer: B

50. What type of backup does VxRail Manager support?

A. File-level backup
B. Image-based backup
C. Full-system backup
D. Incremental backup
Answer: C

51. What is the vSAN automatic rebalancing threshold recommended by VMware?

A. 25%
B. 15%
C. 30%
D. 20%
Answer: D
Explanation:
The recommended vSAN automatic rebalancing threshold by VMware is 20%. This threshold
ensures that vSAN automatically initiates rebalancing operations when the storage utilization
across the disks in the vSAN datastore becomes uneven beyond this threshold, maintaining
optimal performance and storage efficiency.
Reference: VMware vSAN Rebalancing Guide
 52. How is vSAN Health monitored within a VxRail environment?
A. Through the vSAN Health Check plug-in
B. Using third-party monitoring tools
C. Via the VxRail Manager interface
D. Through direct console access
Answer: A

More Hot Exams are available.

350-401 ENCOR Exam Dumps

350-801 CLCOR Exam Dumps

200-301 CCNA Exam Dumps

Powered by TCPDF (www.tcpdf.org)