K Nell TDS
Issue 07/11/2017
Technical Data Sheet
Certificate No:0338-CPR-0689
S8NW/PB1000 CERTIFICATION
SERVICES
Notified Body
S8NW/ PB1000 is a UV stabilized polypropylene needle punched nonwoven geotextile. It is manufactured at one of Thrace
Nonwovens & Geosynthetics S.A. facilities that have achieved ISO 9001:2008 certification for its systematic approach to quality
as well as ISO 14001:2004 for its safe environmental practices. The construction of the geotextile makes S8NW / PB1000 ideal
for the following applications.
Applications and intended uses of the needle punched non-woven geotextile
EN 13249 EN 13250 EN 13251 EN 13252 EN 13253 EN 13254 EN 13255 EN 13256 EN 13257 EN 13265
F F F F F F F F F
R R R D R R R R R
F+S F+S F+S F+S F+S F+S F+S F+S F+R
R+S R+S R+S F+D R+S R+S R+S R+S
F+R F+R F+R F+S+D F+R F+R F+R F+R
F+R+S F+R+S F+R+S F+R+S F+R+S F+R+S F+R+S
It is resistant to commonly encountered soil chemicals, mildew and insects and is non-biodegradable. S8NW / PB1000
conforms to the property values listed below. Technical data are based on statistical analysis on 95% confidence limit.
PROPERTY TEST METHOD VALUE
MECHANICAL
Tensile Strength (MD/CD) EN ISO 10319 Average kN/m 8.0/8.0
Elongation (MD/CD) EN ISO 10319 Average % 45/45
Resistance to static puncture EN ISO 12236 Average N 1500
Dynamic Perforation resistance EN ISO 13433 Average mm 36
HYDRAULIC
Characteristic Opening Size (O90) EN ISO 12956 Average μm 100
Water flow velocity VH50 EN ISO 11058 Average mm/sec 130
Water flow rate EN ISO 11058 Average l/(m2·sec) 130
HG 1.0 at 20kPa 37/25
Water flow capacity in the
HG 1.0 at 100kPa EN ISO 12958 Average l/m/sec*10-4 2.2/3.8
plane (MD/CD)
HG 1.0 at 200kPa 1.7/1.3
PHYSICAL
Mass/Unit Area EN 9864 Average gr/m2 100
Thickness (2kPa) EN 9863-1 Average mm 0.8
STANDARD PACKAGING
Roll Width/ Length Measured Typical m 4.5 /100
NOTES:
• Thrace Nonwovens & Geosynthetics S.A. Technical Fabrics reserves the right to alter product specifications at any time without prior notice. It is the responsibility of all users to satisfy
themselves that the above data are current.
• The geotextiles listed are CE marked and they come along with a CE certificate after a customer request.
• Polypropylene is the constituent polymer used in the production of the S NW geotextiles series.
• To be covered within two weeks after installation. Predicted to be durable for up to 100 years in natural soils with 4≤pH≤9 and soil temperatures ≤25oC and is highly resistant
to acidic and alkaline environments, based on a durability assessment (EN ISO 13438, procedure A, mod., 28d in water at 80°C followed by 112d in air at 100°C).
• F = Filtration, R = Reinforcement, S = Separation, D = Drainage
• Roll size may vary according to type and customer request.
The information contained herein is furnished without charge or obligation and the recipient assumes all the responsibility for its use. Because conditions for use and handling may vary
and are beyond our control, Thrace Nonwovens & Geosynthetics S.A. makes no representation about, and is no responsible or liable for, the accuracy or reliability of said information or
performance of any product. Any specification, properties or applications listed herein are provided as information only in no way modify, amend, enlarge or create any warranty. Nothing
contained herein is to be construed as permission or as any recommendation to infringe any patent.
