IEC HAZARDOUS LOCATIONS CERTIFICATION DOCUMENTS
Standard IEC 60079 IEC 60079-1 IEC 60079-2 IEC 60079-3 IEC 60079-4 IEC 60079-5 IEC 60079-6 IEC 60079-7 IEC 60079-9 IEC 60079-10 IEC 60079-11 IEC 60079-14 IEC 60079-15 IEC 60079-17 IEC 60079-18 IEC 60079-19 IEC 60079-25 IEC 60079-26 IEC 60079-27 IEC 60079-28 IEC 60079-29-1 IEC 60079-29-2 IEC 60079-30-1 IEC 60079-30-2 IEC 61241-0 IEC 61241-1 IEC 61241-2-1
IEC 61241-2-3 IEC 61241-4 IEC 61241-10 IEC 61241-11
Title Explosive Atmospheres -- Part 0: Equipment - General Requirements Explosive Atmospheres -- Part 1: Equipment Protection by Flameproof Enclosures "d" Explosive Atmospheres -- Part 2: Equipment Protection by Pressurized Enclosures "p" Electrical Apparatus for Explosive Gas Atmospheres -- Part 3: Spark-Test Apparatus for Intrinsically-Safe Circuits Electrical Apparatus for Explosive Gas Atmospheres -- Part 4: Method of Test for Ignition Temperature Explosive Atmospheres -- Part 5: Equipment Protection by Powder Filling "q" Explosive Atmospheres -- Part 6: Equipment Protection by Oil-Immersion "o" Explosive Atmospheres -- Part 7: Equipment Protection by Increased Safety "e" Electrical Apparatus for Explosive Gas Atmospheres -- Part 9: Marking Electrical Apparatus for Explosive Gas Atmospheres -- Part 10: Classification of Hazardous Areas Explosive Atmospheres -- Part 11: Equipment Protection by Intrinsic Safety "i" Explosive Atmospheres -- Part 14: Electrical Installations Design, Selection and Erection Electrical Apparatus for Explosive Gas Atmospheres -- Part 15: Type of Protection "n" Explosive Atmospheres -- Part 17: Electrical Installations Inspection and Maintenance Electrical Apparatus for Explosive Gas Atmospheres -- Part 18: Encapsulation "m" Explosive Atmospheres -- Part 19: Equipment Repair, Overhaul and Reclamation Electrical Apparatus for Explosive Gas Atmospheres -- Part 25: Intrinsically Safe Systems Explosive Atmospheres -- Part 26: Equipment with Equipment Protection Level (EPL) GA Explosive Atmospheres -- Part 27: Fieldbus Intrinsically Safe Concept (FISCO) Explosive Atmospheres -- Part 28: Protection of Equipment and Transmission Systems using Optical Radiation Explosive Atmospheres -- Part 29-1: Gas Detectors -- Performance Requirements of Detectors for Flammable Gases Explosive Atmospheres -- Part 29-2: Gas Detectors - Selection, Installation, Use and Maintenance of Detectors for Flammable Gases and Oxygen Explosive Atmospheres -- Part 30-1: Electrical Resistance Trace Heating - General and Testing Requirements Explosive Atmospheres -- Part 30-2: Electrical Resistance Trace Heating -- Application Guide for Design, Installation and Maintenance Electrical Apparatus for use in the Presence of Combustible Dust -- Part 0: General Requirements Electrical Apparatus for use in the Presence of Combustible Dust -- Part 1: Protection by Enclosures "tD" Electrical Apparatus for use in the Presence of Combustible Dust -- Part 2: Test Methods Section 1: Methods for Determining the Minimum Ignition Temperatures of Dust Electrical Apparatus for use in the Presence of Combustible Dust -- Part 2: Test Methods Section 3: Method for Determining Minimum Ignition Energy of Dust/Air Mixtures Electrical Apparatus for use in the Presence of Combustible Dust -- Part 4: Type of Protection "pD" Electrical Apparatus for use in the Presence of Combustible Dust -- Part 10: Classification of Areas where Combustible Dusts are or may be Present Electrical Apparatus for use in the Presence of Combustible Dust -- Part 11: Protection
by Intrinsic Safety "iD" Electrical Apparatus for use in the Presence of Combustible Dust -- Part 14: Selection IEC 61241-14 and Installation Electrical Apparatus for use in the Presence of Combustible Dust -- Part 17: Inspection IEC 61241-17 and Maintenance of Electrical Installations in Hazardous Areas (other than mines) Electrical Apparatus for use in the Presence of Combustible Dust -- Part 18: Protection IEC 61241-18 by Encapsulation "mD" Electrical apparatus for the detection and measurement of flammable gases -- Part 1: IEC 61779-1 General requirements and test methods Electrical apparatus for the detection and measurement of flammable gases -- Part 2: IEC 61779-2 Performance requirements for group I apparatus indicating a volume fraction up to 5% methane in air Electrical apparatus for the detection and measurement of flammable gases -- Part 3: IEC 61779-3 Performance requirements for group I apparatus indicating a volume fraction up to 100% methane in air Electrical apparatus for the detection and measurement of flammable gases -- Part 4: IEC 61779-4 Performance requirements for group II apparatus indicating a volume fraction up to 100% lower explosive limit Electrical apparatus for the detection and measurement of flammable gases -- Part 5: IEC 61779-5 Performance requirements for group II apparatus indicating a volume fraction up to 100% gas Electrical apparatus for the detection and measurement of flammable gases -- Part 6: IEC 61779-6 Guide for the Selection, Installation, Use and Maintenance of Apparatus for the Detection and Measurement of Flammable Gases Caplights for use in Mines Susceptible to Firedamp -- Part 1: General Requirements -IEC 62013-1 Construction and Testing in Relation to the Risk of Explosion Caplights for use in Mines Susceptible to Firedamp -- Part 2: Performance and Other IEC 62013-2 Safety-Related Matters
