1
S2 Currency Dispenser 231
S2 Currency Dispenser
INTRODUCTION
The S2 Currency Dispenser is also referred to as the USB Media Dispenser.
CAUTION
Make sure that ESD precautions are observed.
Carriage
Carriage
Umbilical
Single Note Transport
(SNT) Bill Aligner Module
(BAM)
Nose Main Motor & Pump
Assembly
Double Pick Module
Purge Bin Presenter Core
Status Indicator
Lights
Currency Cassettes
Pick Support Frame
NCR — CONFIDENTIAL AND PROPRIETARY January 2015
Use pursuant to Company Instructions
1
232 S2 Currency Dispenser
DESCRIPTION
The dispenser, upon command from the ATM processor, selects bills from the cassettes;
tests for singularity and irregularities, stacks them into a single bunch then presents the
bunch to the customer. The presented bunch will remain in the present position until
removed by the customer or retracted under application control.
S2 Dispenser modules and cassettes are not interchangeable with earlier designs of
dispenser.
The dispenser is an assembly of the following:
Presenter Core ‐ front or rear access
Nose
Carriage ‐ front or rear access
Bill Aligner Module (BAM)
Single Note Transport (SNT)
Main Motor and Pump Assembly
Double Pick Module(s)
Pick Support Frame
Currency Cassettes
Purge Bin ‐ open or latchfast
Status Indicator Lights
Main Control Board
Weight
The weight of the basic 4‐high unit with empty currency cassettes is 61.5 kg (136 lb).
January 2015 NCR — CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
1
S2 Currency Dispenser 233
Presenter Core
Carriage Cam
(Primary)
Carriage Umbilical Flex
Purge Bin
Sensors
Cam Motor
Vacuum
Sensor
Vacuum
Reservior
Module Latch
Sensor
24VDC
Interlock
Switch
Purge Bin
Carriage Position CIC
Switch
Cam CIC Sensor
Carriage Cam
Purge Bin (Secondary)
LED Interface
Purge Bin Latch
Sensor
Nose
Carriage Present Flag
Variants:
144.5 mm Front Access
154.0 mm Front Access
172.0 mm Rear Access
357.5 mm Rear Access
471.5 mm Rear Access
NCR — CONFIDENTIAL AND PROPRIETARY January 2015
Use pursuant to Company Instructions
1
234 S2 Currency Dispenser
Carriage
Chassis Cover
CIC Sensor Target
Rear Access Front Access
Closed Closed
Lower Plate
Carriage Position
Sensor Rear Access
Open
Exit/Pre-Exit & Bunch
Sensors
Front Access
Open
Pre-Exit Sensor Bunch Sensor
Exit Sensor
Timing Disk
Belt Motor
Carriage with chassis cover removed
January 2015 NCR — CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
1
S2 Currency Dispenser 235
Bill Aligner Module (BAM)
Finger Rack
Edge Register
Motor
Sensor
Single Note Transport (SNT)
Media Deflector Sensors
Divert Gate
Media Deflector
Fingers
Stack Entry Sensor
(PurgeSen)
Flickers
Divert Entry Sensor
Divert Gate
Sensor
Width Sensor
Line 2 Timing Sensor Hall Effect Thickness Sensor
(TimeDiscSen) (HETS)
NCR — CONFIDENTIAL AND PROPRIETARY January 2015
Use pursuant to Company Instructions
1
236 S2 Currency Dispenser
Main Motor and Pump Assembly
Main Motor
Vacuum Pump
January 2015 NCR — CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
1
S2 Currency Dispenser 237
Double Pick Module
Suction
Cup
Note Low
Pick Sensor Sensor Pick Sensor
LED
Key Plate
Pick Arm
Motor
Quad CIC Board
Pick Arm
D Wheel Shaft
Position Sensors
Position Sensors
Solenoid Valve
Vacuum Hose
Currency Cassette
Refer to the NCR S2 Dispenser Cassettes Operator Guide (B006‐6966) and the S2
Currency Cassette chapter in this service manual.
NCR — CONFIDENTIAL AND PROPRIETARY January 2015
Use pursuant to Company Instructions
1
238 S2 Currency Dispenser
Purge Bin
Divider (optional)
Retract Reject
Open Purge Bin Divert
Purge Bin Areas
Status Indicator Lights
The status indicator lights can be configured by the owning authority.
The default configuration is:
Indicator Light Possible Root Cause
Solid Red Dispenser in service.
Action is required before dispenser can be racked in.
Flashing Red Dispenser out of service.
Action required before dispenser can be brought into service.
Solid Amber Dispenser in service.
Action required to repair dispenser.
Flashing Amber Dispenser in service.
Action required to replenish dispenser.
Solid Green Dispenser in service.
No action required.
January 2015 NCR — CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
1
S2 Currency Dispenser 239
Vacuum System
Vacuum Sensor
Vacuum Pump
Vacuum Reservoir Main Motor
Air Filter
Pick Arm Motor
T Connector
Suction Cup
Pick Line Solenoid Valve
NCR — CONFIDENTIAL AND PROPRIETARY January 2015
Use pursuant to Company Instructions
1
240 S2 Currency Dispenser
Main Control Board
J16 J1 J2 J3 J4 J5
J15
J6
J7
J8
J9
J14 J25
J13 J12 J11 J10
Number Harness Number Harness
J1 Presenter Harness J10 Lower Pick Module Harness
J2 Presenter Harness J11 Lower Pick Module Harness
J3 SNT Harness J12 Lower Dual cassette ID Harness
J4 SNT Harness J13 SOH Harness
J5 Main Motor J14 Upper Dual cassette ID Harness
J6 USB Mini Cable J15 SOH Harness
J7 +24VDC Power J16 RJ45 Cable to shutter PCB
J8 Upper Pick Module Harness J25 BAM Harness
J9 Upper Pick Module Harness
January 2015 NCR — CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
1
S2 Currency Dispenser 241
Electrical System
Carriage Position CIC
K
Carriage Sensor A Media Deflector Motor
J
B Purge Bin Sensors
Presenter Carriage PCB Vacuum
Timing Disc J1 Sensor Purge Bin LEDs Interface
J5
Sensor J2 J4 J3 Carriage Position HETS
Sensor 24VDC Presenter
J2 Interlock CIC
J3 J1 Switch
Presenter Relay PCB Carriage
Purge Bin
Motor Motor
Switch
Width Sensor
F/A Flex Interface R/A Cam Purge Bin Latch Sensor
C Motor Divert Gate
J3
J2 Solenoid
J1
Module Latch Sensor
BAM Motor
J4
Shutter PCB SNT Sensor Board
E
Status Indicator
J16 J1 J2 J3 J4 J5
D Main Motor
(optional) (Exit/Entry)
J15 USB Hub Divert/Transport Sensor
J6
H
+24VDC Main PSU
J7
Divert Gate Flag Sensor
BAM CIC
J8 Pick1 Motor
Timing Disc Sensor
J14
J9
J25
G Quad CIC
F Pick2 Motor
J13 J12 J11 J10
Pick1 Sensor Pick1
Dual Cass ID CIC Solenoid Value
for Cassettes 1 & 2 Pick1 LED
F
G
Dual Cass ID CIC Pick2 Sensor
for Cassettes 3 & 4 Pick2
Pick2 LED Solenoid Value
Pick Module
for Cassettes 3 & 4
Harnesses
A. Umbilical Flex Harness
B. Carriage Position Sensor Harness
C. Presenter Harness
D. State of Health Harness
E. SNT Harness
F. Dual Cassette ID Harness
G. Pick Module Harness
H. BAM CIC Harness
J. Purge Bin Interface Harness
K. Purge Bin Interconnect Harness
NCR — CONFIDENTIAL AND PROPRIETARY January 2015
Use pursuant to Company Instructions
1
242 S2 Currency Dispenser
Sensors
Front Access Carriage
Carriage Open Carriage Closed
Presenter Timing Disc
Sensor Carriage Flag
Rear Access Carriage Carriage Position
Sensor
Bunch Pre-Exit Exit
Purge Bin Sensors
Carriage CIC
Nose Media Deflector Sensors Nose
(Front Access) (Rear Access)
Stack Entry Sensor
BAM CIC
Purge Bin
Latch Sensor Clamp Cam
Purge Bin CIC
Present Sensor Divert Entry Sensor Width Sensor
Vacuum Sensor
HETS Pick Sensor
Cassette Latch Sensor
Pick 1
Cassette ID Sensor
Note Low Sensor
Pick Sensor LED
Pick 2
Upper Pick Module
Lower Pick Module
similar Pick Line
Position Sensor
D Wheel Shaft
Position Sensor
Quad CIC Board
January 2015 NCR — CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
