EMINENT INTERNATIONAL TESTING CENTRE PRIVATE LIMITED, PLOT 76, INDUSTRIAL PARK,
Laboratory Name :
EPIP, PASHAMYLARAM, ISNAPUR, SANGAREDDY, MEDAK, TELANGANA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11560 Page No 1 of 6
Validity 19/04/2023 to 18/04/2025 Last Amended on 18/04/2024
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
Permanent Facility
MECHANICAL- BUILDINGS
1 Building Facades Air Infiltration/ Exfiltration Test AS/NZ 4284 Section 8.4
MATERIALS
MECHANICAL- BUILDINGS
2 Building Facades Air infiltration/ Exfiltration Test ASTM E283
MATERIALS
CWCT - Standard Test Method
MECHANICAL- BUILDINGS
3 Building Facades Air infiltration/ Exfiltration Test for Building Envelopes, Section
MATERIALS
5
MECHANICAL- BUILDINGS
4 Building Facades BMU Restraint Test AS/NZ 4284 Section 8.7
MATERIALS
MECHANICAL- BUILDINGS Dynamic Water Penetration
5 Building Facades AAMA 501.1
MATERIALS Test
CWCT - Standard Test Method
MECHANICAL- BUILDINGS Dynamic Water Penetration
6 Building Facades for Building Envelopes, Section
MATERIALS Test
7
MECHANICAL- BUILDINGS
7 Building Facades Proof Load Test AS/NZ 4284 Section 8.8
MATERIALS
MECHANICAL- BUILDINGS
8 Building Facades Proof Load Test ASTM E330
MATERIALS
CWCT - Standard Test Method
MECHANICAL- BUILDINGS
9 Building Facades Proof Load Test for Building Envelopes, Section
MATERIALS
12
MECHANICAL- BUILDINGS
10 Building Facades Seal Degradation AS/NZ 4284 Section 8.10
MATERIALS
CWCT - Standard Test Method
MECHANICAL- BUILDINGS Seismic & Vertical
11 Building Facades for Building Envelopes, Section
MATERIALS Displacement Test
17
MECHANICAL- BUILDINGS
12 Building Facades Seismic Test AAMA 501.4
MATERIALS
MECHANICAL- BUILDINGS
13 Building Facades Seismic Test AS/NZ 4284 Section 8.9
MATERIALS
MECHANICAL- BUILDINGS
14 Building Facades Structural Performance Test ASTM E330
MATERIALS
CWCT - Standard Test Method
MECHANICAL- BUILDINGS
15 Building Facades Structural Performance Test for Building Envelopes, Section
MATERIALS
11
MECHANICAL- BUILDINGS Structural Performance Test -
16 Building Facades AS/NZ 4284 Section 8.3
MATERIALS Classification
This is annexure to 'Certificate of Accreditation' and does not require any signature.
EMINENT INTERNATIONAL TESTING CENTRE PRIVATE LIMITED, PLOT 76, INDUSTRIAL PARK,
Laboratory Name :
EPIP, PASHAMYLARAM, ISNAPUR, SANGAREDDY, MEDAK, TELANGANA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11560 Page No 2 of 6
Validity 19/04/2023 to 18/04/2025 Last Amended on 18/04/2024
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- BUILDINGS
17 Building Facades Vertical Displacement Test AAMA 501.7
MATERIALS
CWCT - Standard Test Method
MECHANICAL- BUILDINGS
18 Building Facades Water Penetration Test for Building Envelopes, Section
MATERIALS
6
MECHANICAL- BUILDINGS
19 Building Facades Water Penetration Test - Cyclic AS/NZ 4284 Section 8.6
MATERIALS
MECHANICAL- BUILDINGS
20 Building Facades Water Penetration Test - Cyclic ASTM E547
MATERIALS
MECHANICAL- BUILDINGS
21 Building Facades Water Penetration Test - Static AS/NZ 4284 Section 8.5
MATERIALS
MECHANICAL- BUILDINGS
22 Building Facades Water Penetration Test - Static ASTM E331
MATERIALS
MECHANICAL- BUILDINGS Air infiltration Test/Exfiltration
23 Curtain wall BS EN 12153
MATERIALS Test - Test Method
MECHANICAL- BUILDINGS Air infiltration/Exfiltration Test -
24 Curtain wall BS EN 12152
MATERIALS Classification
CWCT - Standard test method
MECHANICAL- BUILDINGS
25 Curtain Wall Fragility for glazed roofing for building envelopes, Section
MATERIALS
16
MECHANICAL- BUILDINGS
26 Curtain wall Impact Test BS EN 14019
MATERIALS
CWCT - Standard test method
MECHANICAL- BUILDINGS
27 Curtain wall Impact Test for building envelopes, Section
MATERIALS
15
MECHANICAL- BUILDINGS Structural Performance Test -
28 Curtain wall BS EN 13116
MATERIALS Performance requirements
MECHANICAL- BUILDINGS Structural Proof Load Test -
29 Curtain wall BS EN 12179
MATERIALS Test method
MECHANICAL- BUILDINGS
30 Curtain wall Thermal cyclic Test AAMA 501.5
MATERIALS
CWCT - Standard test method
MECHANICAL- BUILDINGS
31 Curtain wall Thermal cyclic Test for building envelopes, Section
MATERIALS
18
MECHANICAL- BUILDINGS Water Penetration Test -
32 Curtain wall BS EN 12154
MATERIALS Classification
MECHANICAL- BUILDINGS Water Penetration test - Test
33 Curtain wall BS EN 12155
MATERIALS method
This is annexure to 'Certificate of Accreditation' and does not require any signature.
EMINENT INTERNATIONAL TESTING CENTRE PRIVATE LIMITED, PLOT 76, INDUSTRIAL PARK,
Laboratory Name :
EPIP, PASHAMYLARAM, ISNAPUR, SANGAREDDY, MEDAK, TELANGANA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11560 Page No 3 of 6
Validity 19/04/2023 to 18/04/2025 Last Amended on 18/04/2024
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- BUILDINGS
34 Door and windows Air Exfiltration Test AS 4420.1
MATERIALS
MECHANICAL- BUILDINGS
35 Door and windows Water Penetration Test AS 4420.1
MATERIALS
MECHANICAL- BUILDINGS
36 Doors and windows Air infiltration test AS 4420.1
MATERIALS
MECHANICAL- BUILDINGS
37 Doors and Windows Air Infiltration/ Exfiltration Test BS EN 1026
MATERIALS
MECHANICAL- BUILDINGS Air Infiltration/ Exfiltration Test
38 Doors and Windows BS EN 12207
MATERIALS - Classification
MECHANICAL- BUILDINGS
39 Doors and windows Deflection test AS 4420.1
MATERIALS
MECHANICAL- BUILDINGS
40 Doors and Windows Proof Load Test BS EN 12211
MATERIALS
MECHANICAL- BUILDINGS
41 Doors and Windows Repeated Pressure Test BS EN 12211
MATERIALS
MECHANICAL- BUILDINGS Resistance to Wind Load -
42 Doors and Windows BS EN 12210
MATERIALS Classification
MECHANICAL- BUILDINGS
43 Doors and Windows Structural Performance Test BS EN 12211
MATERIALS
MECHANICAL- BUILDINGS
44 Doors and windows Ultimate strength Test AS 4420.1
MATERIALS
MECHANICAL- BUILDINGS
45 Doors and Windows Water Penetration Test BS EN 1027
MATERIALS
MECHANICAL- BUILDINGS Water Penetration Test -
46 Doors and Windows BS EN 12208
MATERIALS Classification
MECHANICAL- BUILDINGS Safety and Fragility of Glazed
47 Glazed Roofing CWCT Technical note 67
MATERIALS roofing
Safety and Fragility of Glazed
MECHANICAL- BUILDINGS
48 Glazed Roofing Roofing - Guidance on CWCT Technical note 66
MATERIALS
specification
MECHANICAL- BUILDINGS
49 Impact Test Glass BS EN 12600
MATERIALS
MECHANICAL- BUILDINGS
50 Metal/ Glass Railing system Concentrated Load test ASTM E935 Section 10.6
MATERIALS
MECHANICAL- BUILDINGS
51 Metal/ Glass Railing System Static Infill Load Test ASTM E935 Section 10.4
MATERIALS
This is annexure to 'Certificate of Accreditation' and does not require any signature.
EMINENT INTERNATIONAL TESTING CENTRE PRIVATE LIMITED, PLOT 76, INDUSTRIAL PARK,
Laboratory Name :
EPIP, PASHAMYLARAM, ISNAPUR, SANGAREDDY, MEDAK, TELANGANA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11560 Page No 4 of 6
Validity 19/04/2023 to 18/04/2025 Last Amended on 18/04/2024
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- BUILDINGS Static, Uniform, Concentrated
52 Metal/ Glass Railing system ASTM E2358
MATERIALS Load Test - Classification
MECHANICAL- BUILDINGS
53 Metal/ Glass Railing System Uniform Load Test ASTM E935 Section 10.5
MATERIALS
MECHANICAL- BUILDINGS Short bag & Pendulum impact
54 Metal/glass railing system ASTM E2353
MATERIALS test
MECHANICAL- BUILDINGS
55 Metal/Glass railing Test Impact Test - Classification ASTM E2358
MATERIALS
MECHANICAL- BUILDINGS
56 Metal/Glass railing Test Railing Test BS EN 6180
MATERIALS
MECHANICAL- BUILDINGS
57 Permanently fixed and operable joints Site Testing for watertightness CWCT Technical note 41
MATERIALS
This is annexure to 'Certificate of Accreditation' and does not require any signature.
EMINENT INTERNATIONAL TESTING CENTRE PRIVATE LIMITED, PLOT 76, INDUSTRIAL PARK,
Laboratory Name :
EPIP, PASHAMYLARAM, ISNAPUR, SANGAREDDY, MEDAK, TELANGANA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11560 Page No 5 of 6
Validity 19/04/2023 to 18/04/2025 Last Amended on 18/04/2024
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
Site Facility
MECHANICAL- BUILDINGS
1 Building Facades Air infiltration/ Exfiltration Test ASTM E783
MATERIALS
MECHANICAL- BUILDINGS
2 Building Facades Cyclic Water Penetration Test ASTM E1105
MATERIALS
MECHANICAL- BUILDINGS
3 Building Facades Static Water Penetration Test ASTM E1105
MATERIALS
MECHANICAL- BUILDINGS Storefronts, Curtain Wall,
4 Building Facades AAMA 503
MATERIALS Sloped Glazing System Test
MECHANICAL- BUILDINGS
5 Building Facades Structural Test ASTM E330
MATERIALS
MECHANICAL- BUILDINGS
6 Curtain wall Spray bar Test BS EN 13051
MATERIALS
MECHANICAL- BUILDINGS
7 Doors and Windows Fenestration Products Test AAMA 502
MATERIALS
MECHANICAL- BUILDINGS
8 Metal/ Glass Railing System Concentrated Load Test ASTM E935 Section 10.6
MATERIALS
MECHANICAL- BUILDINGS
9 Metal/ Glass Railing System Static Infill Load Test ASTM E935 Section 10.4
MATERIALS
MECHANICAL- BUILDINGS Static, Uniform, Concentrated
10 Metal/ Glass Railing System ASTM E2358
MATERIALS Load Test - Classification
MECHANICAL- BUILDINGS
11 Metal/ Glass Railing System Uniform Load Test ASTM E935 Section 10.5
MATERIALS
MECHANICAL- BUILDINGS
12 Metal/Glass Railing system Railing Test BS EN 6180
MATERIALS
MECHANICAL- BUILDINGS Short bag & Pendulum impact
13 Metal/glass railing system ASTM E2353
MATERIALS test
MECHANICAL- BUILDINGS
14 Metal/Glass railing Test Impact Test - Classification ASTM E2358
MATERIALS
MECHANICAL- BUILDINGS
15 Permanently fixed and operable joints Site Testing for watertightness CWCT Technical note 41
MATERIALS
CWCT - Standard Test Method
MECHANICAL- BUILDINGS Water Penetration Test - Hose
16 Permanently Fixed and Operable Joints for Building Envelopes, Section
MATERIALS Test
9
CWCT - Standard Test Method
MECHANICAL- BUILDINGS Water Penetration Test - Spray
17 Permanently Fixed and Operable Joints for Building Envelopes, Section
MATERIALS Bar
10
This is annexure to 'Certificate of Accreditation' and does not require any signature.
EMINENT INTERNATIONAL TESTING CENTRE PRIVATE LIMITED, PLOT 76, INDUSTRIAL PARK,
Laboratory Name :
EPIP, PASHAMYLARAM, ISNAPUR, SANGAREDDY, MEDAK, TELANGANA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11560 Page No 6 of 6
Validity 19/04/2023 to 18/04/2025 Last Amended on 18/04/2024
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- BUILDINGS Water Penetration Test - Hose
18 Permanently Fixed Joints AAMA 501.2
MATERIALS Test
This is annexure to 'Certificate of Accreditation' and does not require any signature.
