GRUNDFOS DATA BOOKLET
CM15-1 A-R-A-E-AVBE C-A-A-N
Grundfos Pump 96806957
Thank you for your interest in our products
Please contact us for more information, or visit our website
https://www.lenntech.com/grundfos/CMBASIS/96806957/CM15-1-A-R-A-E-AVBE.html
[email protected]
tel. +31-15-261.09.00
fax. +31-15-261.62.89
BE > THINK > INNOVATE
Position Qty. Description
1 CM15-1 A-R-A-E-AVBE
Product No.: 96806957
Compact, reliable, horizontal, multistage, end-suction centrifugal pump with axial suction port and radial
discharge port. The shaft, impellers and chambers are made of stainless steel. The inlet and discharge
parts are made of cast iron. The mechanical shaft seal is a special designed, unbalanced O-ring seal.
Pipework connection is via internal Whitworth pipe threads, Rp (ISO 7/1).
The pump is fitted with a 1-phase, foot-mounted, fan-cooled asynchronous motor.
Further product details
Pump and motor are integrated in a compact and user-friendly design. The pump is fitted to a low base
plate, making it ideal for installation in systems where compactness is important.
The state-of-the-art design and materials of the shaft seal ensure high wear resistance, improved
sticking and dry-running capabilities and long operating life.
Servicing the pump requires no special service tools. Service parts are in stock for quick delivery and
are available as kits, single parts or bulk. Service videos are available on www.youtube.com.
Pump
A combination of a stop ring and a Nord-lock® washer secures a tight and reliable fixation of the
impeller spacing pipes to the splined pump shaft. It is possible to remove and fit the hydraulic parts from
the pump side. The inlet part, chambers and discharge part are hold together by four staybolts.
The pump is fitted with an unbalanced O-ring seal with a rigid torque transmission system. It has a fixed
seal driver ensuring a reliable rotation of all parts. The dynamic secondary seal is an O-ring.
Primary seal:
- Rotating seal ring material: Aluminium oxide (alumina)
- Stationary seat material: Carbon graphite, resin-impregnated
Carbon graphite against alumina is a good all-round seal for not too demanding applications. The
corrosion resistance is often limited in water to a range between pH 5 and pH 10. Usage in liquids
above +90 °C is not recommended. The seal can handle dry-running conditions for short periods.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The pump shaft is connected to the motor shaft through a left thread and tight fit. The shaft cannot be
dismantled.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to EN 50347. Electrical
tolerances comply with EN 60034.
The motor has built-in thermal protection (PTO current and temperature sensors) in accordance with
IEC 60034-11 and requires no further motor protection. The protection reacts to both slow- and
quick-rising temperatures, e.g. constant overload and stalled conditions.
As the thermal protection incorporates automatic reset, the motor must be connected in a way which
ensures that the automatic reset cannot cause accidents.
Technical data
Printed from Grundfos Product Centre [2018.02.043]
Position Qty. Description
Liquid:
Pumped liquid: Water
Liquid temperature range: -20 .. 90 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³
Technical:
Speed for pump data: 2900 rpm
Rated flow: 17 m³/h
Rated head: 14.7 m
Primary shaft seal: AVBE
Approvals on nameplate: CE,WRAS,ACS,TR,EAC
Curve tolerance: ISO9906:2012 3B
Materials:
Pump housing: Cast iron
EN-JL1030
ASTM 30 B
Impeller: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Rubber: EPDM
Installation:
Maximum ambient temperature: 55 °C
Maximum operating pressure: 10 bar
Max pressure at stated temp: 6 bar / 90 °C
10 bar / 40 °C
Flange standard: WHITWORTH THREAD RP
Pump inlet: Rp 2
Pump outlet: Rp 2
Electrical data:
Motor type: 90SA
Rated power - P2: 1.3 kW
Mains frequency: 50 Hz
Rated voltage: 1 x 220-240 V
Service factor: 1
Rated current: 8,4-8,0 A
Starting current: 340 %
Rated speed: 2710-2710 rpm
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Others:
Minimum efficiency index, MEI ≥: 0,7
Net weight: 28.5 kg
Gross weight: 31 kg
Printed from Grundfos Product Centre [2018.02.043]
96806957 CM15-1 50 Hz
H CM15-1, 1*220 V, 50Hz eta
[m] [%]
20
18
16
14
12
10 100
8 80
6 60
4 40
2 20
0 0
0 2 4 6 8 10 12 14 16 18 20 Q [m³/h]
P NPSH
[W] [m]
1400 14
P1
1200 12
1000 10
P2
800 8
600 6
400 4
200 2
0 0
Printed from Grundfos Product Centre [2018.02.043]
H CM15-1, 1*220 V, 50Hz eta
Description Value [m] [%]
General information:
Product name: CM15-1 A-R-A-E-AVBE
20
Product No: 96806957
EAN number: 5700310919041 18
Technical:
Speed for pump data: 2900 rpm 16
Rated flow: 17 m³/h
14
Rated head: 14.7 m
Impellers: 1 12
Primary shaft seal: AVBE
Approvals on nameplate: CE,WRAS,ACS,TR,EAC 10 100
Curve tolerance: ISO9906:2012 3B
8 80
Pump version: A
Model: A 6 60
Materials:
Pump housing: Cast iron 4 40
EN-JL1030
2 20
ASTM 30 B
Impeller: Stainless steel 0 0
0 5 10 15 Q [m³/h]
DIN W.-Nr. 1.4301
P NPSH
AISI 304 [W] [m]
Material code: A P1
Rubber: EPDM 1200 12
Code for rubber: E 1000 10
P2
Installation:
800 8
Maximum ambient temperature: 55 °C
600 6
Maximum operating pressure: 10 bar
238.5
241.8
420.7
199
160
174
189
170
140
12
Rp 3/8Rp 2
Rp 2 190.4
97.2
91.8
231.7
323.5
Max pressure at stated temp: 6 bar / 90 °C 400 4
10 bar / 40 °C 200 2
Flange standard: WHITWORTH THREAD RP
0 0
Connect code: R
Pump inlet: Rp 2
Pump outlet: Rp 2 323.5
Liquid: 231.7 91.8 97.2
Pumped liquid: Water 190.4 Rp 2
Liquid temperature range: -20 .. 90 °C
Liquid temperature during operation: 20 °C Rp 2
241.8
Rp 3/8
238.5
Density: 998.2 kg/m³
12
100
Electrical data:
Motor type: 90SA 160 140 189
Rated power - P2: 1.3 kW 199 170 174
420.7
Mains frequency: 50 Hz
Rated voltage: 1 x 220-240 V
Service factor: 1
Rated current: 8,4-8,0 A
Starting current: 340 %
Rated speed: 2710-2710 rpm
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: TP211
Others:
BLACK
YELLOW
Minimum efficiency index, MEI ≥: 0,7
Net weight: 28.5 kg
Gross weight: 31 kg
W2 U2 V2
MAIN
AUX
U1 V1 W1 L
BROWN
N
BLUE
3
2 1
Printed from Grundfos Product Centre [2018.02.043]
96806957 CM15-1 50 Hz
cos phi CM15-1 + 90SA 1.3 kW 1*220 V, 50 Hz, SF = 1 I
eta [A]
cos phi
0.8 8
eta
0.6 6
0.4 4
0.2 2
0.0 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 P2 [kW]
n P1
[rpm] [kW]
P1
2800 1.6
n
2600 1.2
2400 0.8
2200 0.4
2000 0.0
Printed from Grundfos Product Centre [2018.02.043]
96806957 CM15-1 50 Hz
Rp 2
Rp 2
91.8 97.2
174
189
420.7
323.5
140
170
231.7
238.5
241.8
100
190.4
160
199
Rp 3/8
12
Note! All units are in [mm] unless others are stated.
Disclaimer: This simplified dimensional drawing does not show all details.
Printed from Grundfos Product Centre [2018.02.043]
96806957 CM15-1 50 Hz
BLACK
YELLOW
W2 U2 V2
MAIN
AUX
U1 V1 W1 L
BROWN
N
BLUE
3
2 1
Note! All units are in [mm] unless others are stated.
Printed from Grundfos Product Centre [2018.02.043]
Disclaimer: The information about the Grundfos pump in this document may be outdated.
Data may be subject to alterations without further notice.
Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
[email protected] www.lenntech.com
tel. +31-15-261.09.00
fax. +31-15-261.62.89
