OWNER’S MANUAL

LED LCD MONITOR

(LED Monitor*)

* LG LED Monitor applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and
retain it for future reference.

24ML600M
27ML600M
24ML600S
27ML600S www.lg.com
27MN60T
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
 TABLE OF CONTENTS LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.

LICENSE....................................................... 2
ENGLISH

ASSEMBLING AND PREPARING................... 3 The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc.
USING THE MONITOR................................... 8

USER SETTINGS......................................... 10

TROUBLESHOOTING.................................. 21

PRODUCT SPECIFICATION.......................... 22

2
ASSEMBLING AND PREPARING NOTE
•• The components may look different from those illustrated here.
•• Without prior notice, all product information and specifications contained in this manual are subject to change
CAUTION to improve the performance of the product.
•• To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer

ENGLISH
•• Always use genuine LG components to ensure safety and product performance.
•• The product warranty will not cover damage or injury caused by the use of unauthorized components. from which you purchased the product.
•• It is recommended to use the supplied components. •• The power cord provided may differ depending upon the region.
•• If you use generic cables not certified by LG, the screen may not display or there may be image problems.
•• Illustrations in this document represent typical procedures, so they may look different from the actual product. Supported Drivers and Software
•• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing
so may damage the product.) You can download and install the latest version from the LGE website (www.lg.com).
•• Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this Drivers and Software Installation Priority
way will not be covered by the product warranty.
•• Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand Monitor Driver Recommended
and could result in personal injury. OnScreen Control Recommended
•• When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen
may cause damage to it.

3
 Product and Button Description Moving and Lifting the Monitor
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or
damaged and to ensure safe transportation, regardless of its shape or size.
•• Place the monitor in the original box or packing material before attempting to move it.
ENGLISH

•• Before moving or lifting the monitor, disconnect the power cord and all other cables.
•• Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
•• When holding the monitor, the screen should face away from you to prevent it from being scratched.
•• When transporting the monitor, do not expose the monitor to shock or excessive vibration.
•• When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.

Joystick Button

How to Use the Joystick Button

You can easily control the functions of the monitor by pressing the joystick button or moving it left/right/up/
down with your finger.

Basic Functions
CAUTION
Press the joystick button once with your finger •• Avoid touching the monitor screen as much as possible.
Power on
to turn on the monitor. -- This may result in damage to the screen or some of the pixels used to create images.

Press and hold the joystick button once more

Power off than 3 seconds with your finger to turn off the
monitor.

You can control the volume by moving the

/ Volume control
joystick button left/right.
•• If you use the monitor panel without the stand base, its joystick button may cause the monitor to become
unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick
NOTE button to malfunction.
•• The joystick button is located at the bottom of the monitor.

4
Installing on a Table Adjusting the Angle
•• Lift the monitor and place it on the table in an upright position. Place the monitor at least 100 mm (3.94 1 Place the monitor mounted on the stand base in an upright position.
inches) away from the wall to ensure sufficient ventilation.
2 Adjust the angle of the screen.
24ML600M 24ML600S

ENGLISH
The angle of the screen can be adjusted forward or backward from -2° to 15° for a comfortable viewing
100 mm experience.
(3.94 inches) 100 mm 27ML600M 27ML600S 27MN60T
(3.94 inches)
The angle of the screen can be adjusted forward or backward from -5° to 15° for a comfortable viewing
100 mm experience.
(3.94 inches) 100 mm
(3.94 inches) WARNING
•• To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as
illustrated below.
•• Be careful not to touch or press the screen area when adjusting the angle of the monitor.

CAUTION
•• Unplug the power cord before moving or installing the monitor. There is risk of electric shock.
•• Make sure to use the power cord that is provided in the product package and connect it to a grounded power
outlet.
•• If you need another power cord, please contact your local dealer or the nearest retail store.

5
 Using the Kensington Lock Installing the Wall Mount Plate
The Kensington security system connector is located at the back of the Monitor set. This monitor meets the specifications for the wall mount plate or other compatible devices.
For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website
at http://www.kensington.com. NOTE
Connect the monitor to a table using the Kensington security system cable. •• The wall mount plate is sold separately.
ENGLISH

•• For more information on installation, refer to the wall mount plate’s installation guide.
•• Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the
screen.
•• Remove the stand before installing the monitor on a wall mount by performing the stand attachment in
reverse.

Installing on the Wall

Install the monitor at least 100 mm (3.94 inches) away from the wall and leave about 100 mm (3.94 inches)
of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be
obtained from your local retail store. Alternatively, please refer to the manual for how to install and set up a
tilting wall mounting bracket.

100 mm
(3.94 inches)
NOTE
•• The Kensington security system is optional. You can obtain optional accessories from most electronics stores.
100 mm 100 mm
(3.94 inches) (3.94 inches)

100 mm
(3.94 inches)

6
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor. CAUTION
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall. •• Unplug the power cord before moving or installing the monitor to avoid electric shock.
•• Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead
Wall Mount (mm) 24ML600M 24ML600S 27ML600M 27ML600S 27MN60T to injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.
•• Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this

ENGLISH
75 x 75 100 x 100
Standard screw M4 x L10 way will not be covered by the product warranty.
Number of screws 4 •• Use the wall mounting bracket and screws that conform to VESA standards. Damage caused by the use or
misuse of inappropriate components will not be covered by the product warranty.
NOTE •• When measured from the back of the monitor, the length of each installed screw must be 8 mm(0.3 inches)
or less.
•• A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable
for any accidents relating to the use of non-standard screws. Wall Mount Plate
•• The wall mount kit includes the installation guide and all necessary parts.
•• The wall mounting bracket is optional. You can obtain optional accessories from your local dealer.
•• The length of the screw may differ for each wall mounting bracket. If you use screws longer than the standard Back of the Monitor
length, it may damage the inside of the product.
•• For more information, please refer to the user manual for the wall mounting bracket.

Wall Mount Plate

Back of the Monitor

Standard screw:
M4 x L10

Max. 8 mm(0.3 inches)

7
 USING THE MONITOR HDMI Connection
Transmits digital video and audio signals from your PC to the monitor.
•• Illustrations in this manual may differ from the actual product. CAUTION
CAUTION •• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
ENGLISH

•• Do not press the screen for a prolonged time. This may cause image distortion. •• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
•• Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a PC
screensaver if possible. •• Recommended HDMI cable types
•• When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power -- High-Speed HDMI®/TM cable
outlet. -- High-Speed HDMI®/TM cable with Ethernet
•• The monitor may flicker when turned on in an area where the temperature is low. This is normal.
•• Sometimes red, green, or blue spots may appear on the screen. This is normal.

Connecting to a PC
•• This monitor supports the *Plug and Play feature.
* Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure
anything or install any manual drivers.

D-SUB connection
Transmits analog video from your PC to the Monitor set.

NOTE
•• When using a D-Sub signal input cable connector for Macintosh
•• Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA
connector on the supplied cable to a 15 pin 2 row connector.

8
Connecting AV Devices
HDMI Connection
HDMI transmits digital video and audio signals from your AV device to the monitor.

ENGLISH
NOTE
•• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
•• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
•• Recommended HDMI cable types
-- High-Speed HDMI®/TM cable
-- High-Speed HDMI®/TM cable with Ethernet

Connecting Peripherals
Headphones Connection
Connect peripherals to the monitor via the headphones port.

NOTE
•• Peripheral devices are sold separately.
•• Depending on the audio settings of the PC and external device, headphones and speaker functions may be
limited.
•• If you use angled earphones, it may cause a problem with connecting another external device to the monitor.
Therefore, it is recommended to use straight earphones.

Angled Straight
(Recommend)

9
 USER SETTINGS
NOTE
ENGLISH

•• Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.

Activating the Main Menu

1 Press the joystick button on the bottom of the monitor.
2 Move the joystick up/down and left/right to set the options.
3 Press the joystick button once more to exit the main menu.

Joystick Button

Button Menu Status Description

Main menu disabled Enables the main menu.
Exits the main menu.
Main menu enabled
(Holding down the button more than 3 seconds to turn off the monitor. You can turn off the monitor this way at any time, including when the OSD is on.)
Main menu disabled Adjusts the monitor volume level. (24ML600M/27ML600M/27MN60T: for HDMI only)(24ML600S/27ML600S: HDMI + D-Sub)
Main menu enabled Enters the Input features.
Main menu disabled Adjusts the monitor volume level. (24ML600M/27ML600M/27MN60T: for HDMI only)(24ML600S/27ML600S: HDMI + D-Sub)
Main menu enabled Enters the Settings feature.
Main menu disabled Displays the information on the current input.
Main menu enabled Turns off the monitor.
Main menu disabled Displays the information on the current input.
Main menu enabled Enters the Picture Mode feature. (for HDMI only)

10
Main Menu Features

ENGLISH
Power Off Power Off

Exit Input Exit Settings

Input Settings

Picture Mode Auto Configuration

(for HDMI only) (for D-SUB only)

Main Menu Description

Input Sets input mode.

Power Off Turns off the monitor.

Settings Configures the screen settings.

Picture Mode Sets the picture mode.

Exit Exits the main menu.

Auto Configuration Operate the Auto configuration for optimal display in D-SUB.

11
 Menu Settings
1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Settings.
2 Move the joystick up/down and left/right to set the options.
3 To return to the upper menu or set other menu items, move the joystick to or pressing ( ) it.
ENGLISH

4 If you want to exit the OSD menu, move the joystick to until you exit.

24ML600M
27ML600M
27MN60T
Quick Settings Input Picture General

24ML600S
27ML600S

Quick Settings Input Picture Sound General

12
Customizing settings

Quick Settings
Settings > Quick Settings Description

ENGLISH
Brightness
Adjusts the color contrast and brightness of the screen.
Contrast
Volume Adjusts the volume level.
Custom The user can adjust it to red, green, or blue by customization.
Warm Sets the screen color to a reddish tone.
Color Temp
Medium Sets the screen color between a red and blue tone.
Cool Sets the screen color to a bluish tone.

Auto Configuration Do you want to Auto No Cancel the select.

(D-SUB only) Configuration? Yes Operate the Auto configuration for optimal display in D-SUB.

Input
Settings > Input Description
Input List Selects the input mode.
Adjusts the aspect ratio of the screen.
Full Wide Displays the video in wide-screen, regardless of the video signal input.
Aspect Ratio Original Displays video according to the aspect ratio of the video signal input.

NOTE
•• The options may disabled at the recommended resolution (1920 x 1080).

13
 Picture
Settings > Picture Description
Custom Allows the user to adjust each element. The color mode of the main menu can be adjusted.
ENGLISH

Reader Optimizes the screen for viewing documents. You can brighten the screen in the OSD menu.
Photo Optimizes the screen to view photos.
Picture Mode Cinema Optimizes the screen to improve the visual effects of a video.
This mode is for users who cannot distinguish between red and green. It enables users with color weakness to easily distinguish
Color Weakness
between the two colors.
Game Optimizes the screen for gameplay.

NOTE
•• If the Picture Mode is changed, the screen may flicker or the resolution of your PC screen may be affected.
•• This is subsidiary for color weakness user. Therefore if you feel uncomfortable with the screen, please turn off this function.
•• This function can’t distinguish some colors in some images.

14
Settings > Picture Description
Brightness Adjusts the brightness of the screen.
Contrast Adjusts the contrast of the screen.

ENGLISH
Sharpness Adjusts the sharpness of the screen.
Off Select this option for everyday viewing. SUPER RESOLUTION+ is turned off in this mode.
Optimized picture quality is displayed when a user wants crystal clear images. It is effective for high
High
quality video or game.
The optimized picture quality is displayed when a user wants images between low and high modes
Middle
for comfortable viewing. It is effective for UCC or SD video.
SUPER RESOLUTION+
The optimized picture quality is displayed when a user wants smooth and natural images. It is
Low
Picture Adjust effective for slow-moving pictures or still images.

NOTE
•• Because this is a function to increase the sharpness of low resolution pictures, it is not recommended to use the function for
normal text or for desktop icons. Doing so may result in unnecessarily high sharpness.
Sets the offset level (for HDMI only).
•• Offset: as a reference for a video signal, this is the darkest color the monitor can display.
Black Level
High Keeps the current contrast ratio of the screen.
Low Lowers the black levels and raises the white levels from the current contrast ratio of the screen.
On Adjusts the brightness automatically according to the screen.
DFC
Off Disables the DFC feature.
Sets a response time for displayed pictures based on the speed of the screen.
For a normal environment, it is recommended that you use Fast.
For a fast-moving picture, it is recommended that you use Faster.
Setting to Faster may cause image sticking.
Game Adjust Response Time Faster Sets the response time to faster.
Fast Sets the response time to fast.
Normal Sets the response time to normal.
Off Does not use the response time improvement feature.
15
 Provides seamless and natural images by synchronizing the vertical frequency of the input signal with that of the output signal.

CAUTION
•• Supported Interface: HDMI
•• Supported Graphic Card : A graphic card that supports AMD’s FreeSync is necessary.
ENGLISH

FreeSync •• Supported Version : Make sure to update the graphic card to the latest driver.
•• For more information and requirement, refer to AMD website at http://www.amd.com/FreeSync
Game Adjust •• FreeSync and 1ms Motion Blur Reduction cannot be enabled simultaneously.
On FreeSync function on.
Off FreeSync function off.
You can control the black contrast to have better visibility in dark scenes.
Increasing the Black Stabilizer value brightens the low gray level area on the screen. (You can easily distinguish objects on dark
Black Stabilizer
game screens.)
Reducing the Black Stabilizer value darkens the low gray level area and increases the dynamic contrast on the screen.

16
 This mode minimizes motion blur in fast-moving videos. To take full advantage of this function, select 1920
x 1080 @ 75Hz before enabling 1ms Motion Blur Reduction.

ENGLISH
On

This function is available for the following vertical frequency. (75Hz)

Turns 1ms Motion Blur Reduction Mode off.

1ms Motion Blur Reduction

Game Adjust Off

NOTE
•• To reduce motion blur, brightness is reduced with backlight control.
•• 1ms Motion Blur Reduction and FreeSync feature can not used at the same time.
•• This function is game-optimized.
•• It is recommended to turn off when you are not using the gaming function.
•• Flicker may occur during 1ms Motion Blur Reduction operation.
Cross Hair provides a mark on the center of the screen for First Person Shooter (FPS) games. Users can select the cross hair that fits
Cross Hair their gaming environment among four different cross hairs.
•• When the monitor is off or enters energy saving mode, the Cross Hair feature is automatically turned Off.

17
 Mode 1, Mode 2, The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the
Gamma Mode 3 lighter the image becomes.
Mode 4 If you do not need to adjust the gamma settings, select Mode 4.
Selects the factory default picture color.
ENGLISH

Warm: Sets the screen color to a reddish tone.

Color Adjust Color Temp Medium: Sets the screen color between a red and blue tone.
Cool: Sets the screen color to a bluish tone.
Custom: The user can adjust it to red, green or blue by customization.
Red
Green You can customize the picture color using Red, Green, and Blue colors.
Blue
Horizontal To move image left and right.
Vertical To move image up and down.
Configuration Adjust
(D-SUB only) Clock To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change.
Phase To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.

User can set the desired resolution.This option is enabled only when the screen resolution on your computer is set to the following(D-SUB only).

NOTE
•• The function is enabled only when the screen resolution on your computer is set to the following, except that the PC output wrong resolution.
Resolution
(D-SUB only) 1024x768, 1280x768, 1360x768, 1366x768,Off

1280x960, 1600x900,Off

1440x900, 1600x900,Off

No Cancel the select.

Picture Reset Do you want to reset your settings?
Yes Returns to the default settings.

18
24ML600S 27ML600S

Sound
Settings > Sound Description

ENGLISH
Volume To adjust the Volume of headphone or speaker.
Main Audio To choose the audio source input.
MaxxAudio® by waves, recipient of a Technical GRAMMY Award® is a suite of studio-quality sound tools for a superior listening
On
MaxxAudio experience.
Off Disables the MaxxAudio function.

19
 General

Settings > General Description

Language To choose the language in which the control names are displayed.
ENGLISH

High Enables SMART ENERGY SAVING you can save energy with this energy- high efficient.
Low Enables SMART ENERGY SAVING you can save energy with this energy- low efficient.
SMART ENERGY SAVING
Off Disables SMART ENERGY SAVING .
* SMART ENERGY SAVING : Conserve energy by using luminance compensation algorithm.
Automatic Standby The monitor will automatically switch to standby mode after a certain period.
Prevents incorrect key input.
On Key input is disabled.
OSD Lock NOTE
•• All function except for the OSD Lock mode, brightness, Contrast, Input and Volume are disabled.
Off Key input is enabled.
Information The display information will be shown the Model, Total Power On Time, Serial Number, Resolution.
No Cancel the select.
Reset Do you want to reset your settings?
Yes Returns to the default settings.

NOTE
•• The value of energy saving data may differ depending on panel and panel suppliers.
•• If you select the option of SMART ENERGY SAVING is High or Low, monitor luminance become lower or higher depend on source.

20
TROUBLESHOOTING
Check the following before calling for service.

ENGLISH
No image appears
Is the power cord of the display connected? •• Check and see if the power cord is connected properly to the power outlet.
Do you see an "Out of Range" message on the screen? •• This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this
manual and configure your display again.
Do you see a "NO SIGNAL" message on the screen? •• After the monitor is on "NO SIGNAL", the monitor goes to DPM mode.
•• This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it.
Can 't you control some functions in OSD?
Can't you select some menu in OSD? •• You can unlock the OSD controls at any time by entering the OSD lock menu and changing items to off.

CAUTION
•• Check Control Panel ► Display ► Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.
•• If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
•• The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card
manufacturer.

Display image is incorrect

The screen color is mono or abnormal. •• Check if the signal cable is properly connected and use a screwdriver to fasten if necessary.
•• Make sure the video card is properly inserted in the slot.
•• Set the color setting higher than 24 bits (true color) at Control Panel ► Settings.
The screen blinks. •• Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display driver? •• Be sure to install the display driver from our web site: http://www.lg.com.
•• Make sure to check if the video card supports Plug&Play function.
The screen is flickering.
Did you select the recommended resolution? •• If the selected resolution is HDMI 1080i 60/50 Hz, the screen may be flickering. Change the resolution to the recommended resolution 1080P.

21
 PRODUCT SPECIFICATION
24ML600M

Color Depth 8-bit color is supported.

ENGLISH

1920 x 1080 @ 75 Hz (HDMI)

Max Resolution
Resolution 1920 x 1080 @ 60 Hz (D-Sub)
Recommended Resolution 1920 x 1080 @ 60 Hz
Power Rating 19 V 1.3 A

Power Sources On mode: 17.5 W Typ. (Outgoing condition)*

Power Consumption Sleep Mode ≤ 0.3 W**
Off Mode ≤ 0.3 W
Type ADS-25SFA-19-3 19025E, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25FSF-19 19025EPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25FSF-19 19025EPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25FSF-19 19025EPI-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25FSF-19 19025EPG-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25FSF-19 19025EPB-1, manufactured by SHENZHEN HONOR ELECTRONIC,
AC/DC adaptor
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
Output: 19 V 1.3 A
Operating Conditions Temperature 0 °C to 40 °C
Humidity Less than 80 %
Environmental Conditions
Storing Conditions Temperature -20 °C to 60 °C
Humidity Less than 85 %

22
 Monitor Size (Width x Height x Depth)
Dimensions With Stand 539.1 x 415.3 x 182.0 (mm) 21.2 x 16.3 x 7.1 (inches)
Without Stand 539.1 x 321.5 x 66.5 (mm) 21.2 x 12.6 x 2.6 (inches)

ENGLISH
With Stand 3.1 kg 6.8 lbs
Weight (Without Packaging)
Without Stand 2.8 kg 6.1 lbs

The specifications are subject to change without notice.

The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with LGE test standard (Full White pattern , Maximum resolution).
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).

23
 PRODUCT SPECIFICATION
24ML600S

Color Depth 8-bit color is supported.

ENGLISH

1920 x 1080 @ 75 Hz (HDMI)

Max Resolution
Resolution 1920 x 1080 @ 60 Hz (D-Sub)
Recommended Resolution 1920 x 1080 @ 60 Hz
Power Rating 19 V 1.6 A

Power Sources On mode: 21.7 W Typ. (Outgoing condition)*

Power Consumption Sleep Mode ≤ 0.3 W**
Off Mode ≤ 0.3 W
Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
AC/DC adaptor
or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
Output: 19 V 1.7 A
Operating Conditions Temperature 0 °C to 40 °C
Humidity Less than 80 %
Environmental Conditions
Storing Conditions Temperature -20 °C to 60 °C
Humidity Less than 85 %
Monitor Size (Width x Height x Depth)
Dimensions With Stand 539.1 x 415.3 x 182.0 (mm) 21.2 x 16.3 x 7.1 (inches)
Without Stand 539.1 x 321.5 x 66.5 (mm) 21.2 x 12.6 x 2.6 (inches)
With Stand 3.2 kg 7.0 lbs
Weight (Without Packaging)
Without Stand 2.8 kg 6.1 lbs
The specifications are subject to change without notice.
The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with LGE test standard (Full White pattern , Maximum resolution).
24 ** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).
 PRODUCT SPECIFICATION
27ML600M 27MN60T

Color Depth 8-bit color is supported.

ENGLISH
1920 x 1080 @ 75 Hz (HDMI)
Max Resolution
Resolution 1920 x 1080 @ 60 Hz (D-Sub)
Recommended Resolution 1920 x 1080 @ 60 Hz
Power Rating 19 V 1.6 A

Power Sources On mode: 25.5 W Typ. (Outgoing condition)*

Power Consumption Sleep Mode ≤ 0.3 W**
Off Mode ≤ 0.3 W
Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
AC/DC adaptor
or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
Output: 19 V 1.7 A
Operating Conditions Temperature 0 °C to 40 °C
Humidity Less than 80 %
Environmental Conditions
Storing Conditions Temperature -20 °C to 60 °C
Humidity Less than 85 %
Monitor Size (Width x Height x Depth)
Dimensions With Stand 611.2 x 453.9 x 209.4 (mm) 24.0 x 17.8 x 8.2 (inches)
Without Stand 611.2 x 362.6 x 72.7 (mm) 24.0 x 14.2 x 2.8 (inches)
With Stand 4.8 kg 10.5 lbs
Weight (Without Packaging)
Without Stand 4.3 kg 9.4 lbs
The specifications are subject to change without notice.
The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with LGE test standard (Full White pattern , Maximum resolution).
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes). 25
 PRODUCT SPECIFICATION
27ML600S

Color Depth 8-bit color is supported.

ENGLISH

1920 x 1080 @ 75 Hz (HDMI)

Max Resolution
Resolution 1920 x 1080 @ 60 Hz (D-Sub)
Recommended Resolution 1920 x 1080 @ 60 Hz
Power Rating 19 V 2.0 A

Power Sources On mode: 27.6 W Typ. (Outgoing condition)*

Power Consumption Sleep Mode ≤ 0.3 W**
Off Mode ≤ 0.3 W
Type LCAP21C, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26B-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26B-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
AC/DC adaptor Output: 19 V 2.1 A
Type DA-48F19, manufactured by Asian Power Devices Inc.
Output: 19 V 2.53 A
Operating Conditions Temperature 0 °C to 40 °C
Humidity Less than 80 %
Environmental Conditions
Storing Conditions Temperature -20 °C to 60 °C
Humidity Less than 85 %

26
 Monitor Size (Width x Height x Depth)
Dimensions With Stand 611.2 x 453.9 x 209.4 (mm) 24.0 x 17.8 x 8.2 (inches)
Without Stand 611.2 x 362.6 x 72.7 (mm) 24.0 x 14.2 x 2.8 (inches)

ENGLISH
With Stand 4.8 kg 10.5 lbs
Weight (Without Packaging)
Without Stand 4.3 kg 9.4 lbs

The specifications are subject to change without notice.

The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with LGE test standard (Full White pattern , Maximum resolution).
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).

27
 Factory Support Mode (Preset Mode, PC)
D-SUB
ENGLISH

Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) Remarks

720 x 400 31.468 70.08 -/+

640 x 480 31.469 59.94 -/-
640 x 480 37.5 75 -/-
800 x 600 37.879 60.317 +/+
800 x 600 46.875 75 +/+
1024 x 768 48.363 60 -/-
1024 x 768 60.023 75.029 +/+
1152 x 864 67.500 75 +/+

1280 x 1024 63.981 60.023 +/+

1280 x 1024 79.976 75.035 +/+

1680 x 1050 65.290 59.954 -/+

1920 x 1080 67.500 60 +/+ Recommend Mode

28
HDMI

Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) Remarks

ENGLISH
720 x 400 31.468 70.08 -/+
640 x 480 31.469 59.94 -/-
640 x 480 37.5 75 -/-
800 x 600 37.879 60.317 +/+
800 x 600 46.875 75 +/+
1024 x 768 48.363 60 -/-
1024 x 768 60.023 75.029 +/+
1152 x 864 67.500 75 +/+
1280 x 1024 63.981 60.023 +/+
1280 x 1024 79.976 75.035 +/+
1680 x 1050 65.290 59.954 -/+
1920 x 1080 67.500 60 +/+ Recommend Mode
1920 x 1080 83.89 74.97 +/+

29
 HDMI Timing (Video)

Factory support mode

Horizontal Frequency(kHz) Vertical Frequency(Hz) HDMI
ENGLISH

(Preset Mode)
480P 31.50 60 O
576P 31.25 50 O
720P 37.50 50 O
720P 45.00 60 O
1080P 56.25 50 O
O
1080P 67.50 60
Recommend Mode

30
 Supplier’s Declaration of Conformity
Trade Name LG
Responsible Party LG Electronics USA, Inc.
Address 111 Sylvan Avenue, North Building
Englewood Cliffa, NJ 07632
Telephone (201)266-2215

The model and serial number of the product are located on the back and on one side of the product.
Record them below in case you ever need service.

Model
Serial No.