Android settings put system hw_customized_networktype
Android settings put system hw_networkmode_gstyle.
I found a trick online to enable more display color modes on my phone beyond "Vivid & Natural". Apparently, someone discovered how to access five different screen modes using ADB (Android Debug Bridge). The total number of screen modes is five: AMOLED cinema with DCI P3 colors, AMOLED Photo in Adobe RGB, Basic, Natural, and Vivid. To
make this work, I had to set my phone's screen mode to Natural from the settings, connect it via ADB on my PC, and type a specific command. After that, I needed to update the changes by going back into the display settings tab. Instead of using ADB, you can also use an app called SETEDIT available in the Play Store for the same purpose. Some
people suggested looking into replicating these modes without using ADB or SETEDIT by figuring out the exact color values/settings they're using, which might be possible with advanced display options and possibly a color measuring tool. Others thought it would be nice if this feature was directly accessible from the settings menu instead of needing
an app to do so. I've seen someone successfully use SETEDIT for this purpose, but one user mentioned that their phone's screen seemed dull and washed out in comparison to their S21 Ultra. I was stumped by Android's limitations on adjusting RGB color levels, but now I'm excited to have discovered SetEdit, which lets me tweak display settings
beyond the Settings app's capabilities even without Root access. By fiddling with sec_display_temperature_blue, green, and red settings in SetEdit, I was able to achieve a more balanced screen appearance that wasn't possible under Vivid mode alone. This is fantastic news; thank you for sharing this gem! Does this fine-tuning work only in Vivid mode
or can we apply similar adjustments to Natural or Basic display modes? Some users are experiencing issues with screen colors on One UI 6. Sam, a previously available solution, is incompatible with the new SDK version and cannot be installed for One UI 6. To install Sam Helper and Plugin manually, users need to bypass the low-target-SDK-block
using ADB: `adb install --bypass-low-target-sdk-block com.litebyte.samhelper.screenmode_5.0_5.0.apk` and grant permission via ADB: `pm grant com.litebyte.samhelper android.permission.WRITE_SECURE_SETTINGS`. For those who want to customize their screen colors, a Reddit post shared a method for enabling five different display modes using
ADB, including "DCI P3 color" and "Adobe RGB". To achieve this, users need to connect their phone to ADB on their PC, type `adb shell settings put system screen_mode_setting 0-4`, and then go back to the Screen mode tab in Settings. Alternatively, SetEdit app can be used for the same purpose. For those who want to adjust RGB color levels beyond
what's allowed by the Settings app without rooting their device, they can use SetEdit to lower the green level (displayed as "-11" in the app) and achieve a more accurate display. Reactions: Various users shared their reactions, including "louforgiveno", "lemonmaster", Mr. Schnabel, and three others. A user shared that they were able to find a solution
to adjust RGB color levels without rooting their device using SetEdit. They successfully lowered the green level (displayed as "-25" in the app) and found it perfect for their screen. Initially, my new high-end cell phone displayed an unnatural green hue on the camera due to my mistake of leaving the 120Hz setting fixed in all apps. This was a rookie
error, as I'd never encountered this issue before. Thankfully, it was a one-time blunder, and I've since learned from my mistake. To take full advantage of your Samsung phone's screen modes, you'll need to access the following settings: Settings > Display > Screen mode. From here, select the "Natural" option for optimal results. To apply these
changes using ADB (Android Debug Bridge), follow these steps: 1. Connect your phone to your PC via ADB. 2. Type `adb shell settings put system screen_mode_setting ` and replace `` with a value ranging from 0 to 4, depending on the desired mode. For example, if you want to set the mode to "AMOLED Cinema", type `adb shell settings put system
screen_mode_setting 0`. To ensure the changes take effect, perform one final step: 1. Open Settings > Display > Screen mode and toggle back to the main menu. This will apply the new setting. Personally, I find the AMOLED Photo mode to be a great middle ground between Vivid and Natural modes. Basic mode seems almost identical to Natural
mode, so you may not notice much of a difference.
