Product data sheet

Specifications

Variable Speed Drive, Altivar

Process ATV900, ATV930, 250kW,
400 to 480V, without braking unit,
IP00
ATV930C25N4C

Product availability: Non-Stock - Not normally stocked in

distribution facility

Main
Range of Product Altivar Process ATV900

Device Application Industrial Application

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Product or Component Type Variable speed drive

Product destination Synchronous motors

Asynchronous motors

Product Specific Application Process for industrial

Variant Standard version

Without braking chopper

Phase 3 phase

Mounting Mode Wall mount

Communication Port Protocol Modbus serial

EtherNet/IP
Modbus TCP

[Us] rated supply voltage 380...480 V - 15...10 %

Continuous output current 481 A 2.5 kHz normal duty

387 A 2.5 kHz heavy duty

EMC filter Integrated

With EMC plate option

IP degree of protection IP21

Degree of protection UL type 1

option module Slot A communication module Profibus DP V1

Slot A communication module PROFINET
Slot A communication module DeviceNet
Slot A communication module EtherCAT
Slot A communication module CANopen daisy chain RJ45
Slot A communication module CANopen SUB-D 9
Slot A communication module CANopen screw terminals
Slot A/slot B/slot C digital and analog I/O extension module
Slot A/slot B/slot C output relay extension module
Slot B 5/12 V digital encoder interface module
Slot B analog encoder interface module
Slot B resolver encoder interface module
communication module Ethernet Powerlink

Discrete input logic 16 preset speeds

Motor power kW 250.0 kW normal duty

200.0 kW heavy duty

Asynchronous motor control Variable torque standard

profile Constant torque standard
Optimized torque mode

Synchronous motor control profile Permanent magnet motor

Synchronous reluctance motor

Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.

Apr 5, 2025 1
Maximum output frequency 599 Hz

Switching frequency 1...8 kHz adjustable

2.5...8 kHz with derating factor

Nominal switching frequency 2.5 kHz

Line current 451.0 A 380 V normal duty)

365.0 A 380 V heavy duty)
366.0 A 480 V normal duty)
301.0 A 480 V heavy duty)

Apparent power 279 kVA 480 V normal duty)

229 kVA 480 V heavy duty)

Maximum transient current 577 A 60 s normal duty)

581 A 60 s heavy duty)

Network Frequency 50-60 Hz

Prospective line Isc 50 kA

Complementary
Discrete input number 10

Discrete input type DI1...DI8 programmable, 24 V DC <= 30 V)3.5 kOhm

DI7, DI8 programmable as pulse input 0…30 kHz, 24 V DC <= 30 V)
STOA, STOB safe torque off, 24 V DC <= 30 V)> 2.2 kOhm

Discrete output number 2

Discrete output type Logic output DQ+ 0…1 kHz <= 30 V DC 100 mA
Programmable as pulse output DQ+ 0…30 kHz <= 30 V DC 20 mA
Logic output DQ- 0…1 kHz <= 30 V DC 100 mA

Analogue input number 3

Analogue input type AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits
AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits

Analogue output number 2

Analogue output type Software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits
Software-configurable current AQ1, AQ2 0...20 mA 500 Ohm 10 bits

Relay output number 3

Relay output type Configurable relay logic R1 fault relay NO/NC 100000 cycles
Configurable relay logic R2 sequence relay NO 1000000 cycles
Configurable relay logic R3 sequence relay NO 1000000 cycles

Maximum switching current Relay output R1 resistive, cos phi = 1 3 A 250 V AC

Relay output R1 resistive, cos phi = 1 3 A 30 V DC
Relay output R1 inductive, cos phi = 0.4 7 ms 2 A 250 V AC
Relay output R1 inductive, cos phi = 0.4 7 ms 2 A 30 V DC
Relay output R2, R3 resistive, cos phi = 1 5 A 250 V AC
Relay output R2, R3 resistive, cos phi = 1 5 A 30 V DC
Relay output R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC
Relay output R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DC

Minimum switching current Relay output R1, R2, R3 5 mA 24 V DC

Physical interface Ethernet

2-wire RS 485

Connector Type 2 RJ45

1 RJ45

Method of access Slave Modbus TCP

Transmission Rate 10, 100 Mbits

4.8 kbps
9600 bit/s
19200 bit/s

Transmission frame RTU

Number of addresses 1…247

2 Apr 5, 2025
Data format 8 bits, configurable odd, even or no parity

Type of polarization No impedance

4 quadrant operation possible False

Acceleration and deceleration Linear adjustable separately from 0.01...9999 s

ramps
Motor slip compensation Adjustable
Can be suppressed
Automatic whatever the load
Not available in permanent magnet motor law

Braking to standstill By DC injection

Brake chopper integrated False

Maximum Input Current per Phase 451.0 A

Maximum output voltage 480.0 V

Relative symmetric network 5%

frequency tolerance
Base load current at high 387.0 A
overload
Base load current at low overload 481.0 A

Power dissipation in W Forced convection 5773 W 380 V 2.5 kHz

Natural convection 606 W 380 V 2.5 kHz

With safety function Safely True

Limited Speed (SLS)
With safety function Safe brake True
management (SBC/SBT)
With safety function Safe False
Operating Stop (SOS)
With safety function Safe Position False
(SP)
With safety function Safe False
programmable logic
With safety function Safe Speed False
Monitor (SSM)
With safety function Safe Stop 1 True
(SS1)
With sft fct Safe Stop 2 (SS2) False

With safety function Safe torque True

off (STO)
With safety function Safely False
Limited Position (SLP)
With safety function Safe False
Direction (SDI)
Protection type Thermal protection motor
Safe torque off motor
Motor phase break motor
Thermal protection drive
Safe torque off drive
Overheating drive
Overcurrent between output phases and earth drive
Overload of output voltage drive
Short-circuit protection drive
Motor phase break drive
Overvoltages on the DC bus drive
Line supply overvoltage drive
Line supply undervoltage drive
Line supply phase loss drive
Overspeed drive
Break on the control circuit drive

Quantity per Set 1

Width 23.5 in (598 mm)

Height 47.05 in (1195 mm)

Depth 15.0 in (380 mm)

Apr 5, 2025 3
Net Weight 447.5 lb(US) (203 kg)

Electrical connection Control screw terminal 0.5...1.5 mm² AWG 20...AWG 16

Line side screw terminal 4 x 185 mm² 3 x 350 kcmil
Motor screw terminal 4 x 185 mm² 3 x 350 kcmil
DC bus screw terminal 4 x 185 mm² 3 x 350 kcmil

Transmission Rate 10/100 Mbit/s Ethernet IP/Modbus TCP

4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial

Exchange mode Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP

Data format 8 bits, configurable odd, even or no parity Modbus serial

Type of polarization No impedance Modbus serial

Number of addresses 1…247 Modbus serial

Supply External supply for digital inputs 24 V DC 19…30 V), <1.25 mA overload and short-
circuit protection
Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10
mA overload and short-circuit protection
Internal supply for digital inputs and STO 24 V DC 21…27 V), <200 mA overload and
short-circuit protection

Local signalling Local diagnostic 3 LED mono/dual colour)

Presence of voltage 1 LED red)
Embedded communication status 3 LED dual colour)
Communication module status 4 LED dual colour)

Input compatibility DI1...DI8 discrete input level 1 PLC IEC 61131-2

DI7, DI8 pulse input level 1 PLC IEC 65A-68
STOA, STOB discrete input level 1 PLC IEC 61131-2

Discrete input logic Positive logic (source) DI1...DI8), < 5 V, > 11 V

Negative logic (sink) DI1...DI8), > 16 V, < 10 V
Positive logic (source) DI7, DI8), < 0.6 V, > 2.5 V
Positive logic (source) STOA, STOB), < 5 V, > 11 V

Sampling duration 2 ms +/- 0.5 ms DI1...DI8) - discrete input

5 ms +/- 1 ms DI7, DI8) - pulse input
1 ms +/- 1 ms AI1, AI2, AI3) - analog input
5 ms +/- 1 ms AQ1, AQ2) - analog output

Accuracy +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
+/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output

Linearity error AI1, AI2, AI3 +/- 0.15 % of maximum value analog input
AQ1, AQ2 +/- 0.2 % analog output

Refresh time Relay output R1, R2, R3)5 ms +/- 0.5 ms)

Isolation Between power and control terminals

Environment
Operating altitude <= 3280.84 ft (1000 m) without derating
3280.84...9842.52 ft (1000...3000 m) with current derating 1 % per 100 m

Operating position Vertical +/- 10 degree

Product Certifications UL
CSA
TÜV

Marking CE

Standards UL 508C
IEC 61800-3
IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1

Maximum THDI <48 % full load IEC 61000-3-12

Assembly style Enclosed

4 Apr 5, 2025
Electromagnetic compatibility Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to
IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6

Environmental class (during Class 3C3 according to IEC 60721-3-3

operation) Class 3S3 according to IEC 60721-3-3

Maximum acceleration under 150 m/s² at 11 ms

shock impact (during operation)
Maximum acceleration under 10 m/s² at 13...200 Hz
vibrational stress (during
operation)
Maximum deflection under 1.5 mm at 2...13 Hz
vibratory load (during operation)
Permitted relative humidity Class 3K5 according to EN 60721-3
(during operation)
Volume of cooling air 332862.7 Gal/hr(US) (1260 m3/h)

Overvoltage category III

Regulation loop Adjustable PID regulator

Insulation resistance > 1 MOhm 500 V DC for 1 minute to earth

Noise level 76 dB 86/188/EEC

Vibration resistance 1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6
1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6

Shock resistance 15 gn 11 ms IEC 60068-2-27

Environmental characteristic Chemical pollution resistance class 3C2 IEC 60721-3-3

Dust pollution resistance class 3S2 IEC 60721-3-3

Relative humidity 5…95 % without condensation IEC 60068-2-3

Ambient air temperature for 14…104 °F (-10…40 °C) (without derating)

operation 104…140 °F (40…60 °C) (with derating factor)

Noise level 76 dB

pollution degree 2

Ambient air transport -13…158 °F (-25…70 °C)

temperature
Ambient Air Temperature for -13…158 °F (-25…70 °C)
Storage

Ordering and shipping details

Category US1CP4E22278

Discount Schedule CP4E

GTIN 3606481154767

Returnability No

Country of origin CN

Packing Units
Unit Type of Package 1 PCE

Number of Units in Package 1 1

Package 1 Height 25.20 in (64.000 cm)

Package 1 Width 30.31 in (77.000 cm)

Package 1 Length 55.12 in (140.000 cm)

Package 1 Weight 555.565 lb(US) (252.000 kg)

Apr 5, 2025 5
 Environmental Data

Schneider Electric aims to achieve Net Zero status by 2050 through supply chain partnerships, lower impact materials, and circularity
via our ongoing “Use Better, Use Longer, Use Again” campaign to extend product lifetimes and recyclability.

Environmental Data explained

How we assess product sustainability

Environmental footprint

Carbon footprint (kg CO2 eq, Total Life cycle) 184862

Use Better

Materials and Substances

Packaging made with recycled cardboard Yes

Packaging without single use plastic No

Pro-active compliance (Product out of EU RoHS legal

EU RoHS Directive
scope)

SCIP Number 405cb612-8eb2-47cb-8883-95e373eada5f

REACh Regulation REACh Declaration

WARNING: This product can expose you to chemicals

including: Lead and lead compounds, which is known to
California proposition 65 the State of California to cause cancer and birth defects
or other reproductive harm. For more information go to
www.P65Warnings.ca.gov

Energy efficiency

Product contributes to saved and avoided emissions Yes

Use Again

Repack and remanufacture

Take-back No

The product must be disposed on European Union

WEEE markets following specific waste collection and never end
up in rubbish bins.

6 Apr 5, 2025
Product data sheet ATV930C25N4C

Dimensions Drawings

Dimensions

Rear, Right and Front View

Apr 5, 2025 7
Product data sheet ATV930C25N4C

8 Apr 5, 2025
Product data sheet ATV930C25N4C

Apr 5, 2025 9
Product data sheet ATV930C25N4C

10 Apr 5, 2025
Product data sheet ATV930C25N4C

Mounting and Clearance

Clearances

X1 X2 X3

≥ 200 mm (7.87 in.) ≥ 150 mm (5.91 in.) ≥ 10 mm (0.39 in.)

Apr 5, 2025 11
Product data sheet ATV930C25N4C

Mounting Types

Mounting Type A: Individual IP21

a≥0

Mounting Type B: Side by Side IP20

Mounting Type C: Individual IP20

12 Apr 5, 2025
Product data sheet ATV930C25N4C

a≥0

Apr 5, 2025 13
Product data sheet ATV930C25N4C

Connections and Schema

Three-Phase Power Supply with Upstream Breaking via Line Contactor

Connection diagrams conforming to standards EN 954-1 category 1 and IEC/EN 61508 capacity SIL1, stopping
category 0 in accordance with standard IEC/EN 60204-1

(1) Line choke if used

(2) Use relay R1 set to operating state Fault to switch Off the product once an error is detected.
A1 : Drive
KM1 : Line Contactor
Q2, Q3 : Circuit breakers
S1, S2 : Pushbuttons
T1 : Transformer for control part

14 Apr 5, 2025
Product data sheet ATV930C25N4C

Three-Phase Power Supply with Downstream Breaking via Contactor

Connection diagrams conforming to standards EN 954-1 category 1 and IEC/EN 61508 capacity SIL1, stopping
category 0 in accordance with standard IEC/EN 60204-1

(1) Line choke if used

(2) Use relay R1 set to operating state Fault to switch Off the product once an error is detected.
A1 : Drive
KM1 : Contactor

Apr 5, 2025 15
Product data sheet ATV930C25N4C

Control Block Wiring Diagram

(1) Safe Torque Off

(2) Analog Output
(3) Digital Input
(4) Reference potentiometer
(5) Analog Input
(6) Digital Output
(7) 0-10 Vdc, x-20 mA
(8) 0-10 Vdc, -10 Vdc...+10 Vdc
R1A, R1B, R1C : Fault relay
R2A, R2C : Sequence relay
R3A, R3C : Sequence relay

Sensor Connection

It is possible to connect either 1 or 3 sensors on terminals AI1 or AI3

16 Apr 5, 2025
Product data sheet ATV930C25N4C

Sink / Source Switch Configuration

The switch is used to adapt the operation of the logic inputs to the technology of the programmable controller outputs.

• Set the switch to Source (factory setting) if using PLC outputs with PNP transistors.
• Set the switch to Ext if using PLC outputs with NPN transistors.

Switch Set to SRC (Source) Position Using the Output Power Supply for the Digital Inputs

Switch Set to SRC (Source) Position and Use of an External Power Supply for the DIs

Switch Set to SK (Sink) Position Using the Output Power Supply for the Digital Inputs

Switch Set to EXT Position Using an External Power Supply for the DIs

Apr 5, 2025 17
Product data sheet ATV930C25N4C

Performance Curves

Derating Curves

40 °C (104 °F)
50 °C (113 °F)
60 °C (140 °F)
In : Nominal Drive Current
SF : Switching Frequency

18 Apr 5, 2025