Econova
Systems Private Limited
Technical Data Sheet
INTERGRANDE 0720
(ANTI-BACTERIAL & ANTI-VIRAL
INTERIOR COATING)
INTERGRANDE - 0720 is an Environment Friendly,
Polymers beyond
Sustainable, High-Performance Coating using water imagination.
based Patented Grafted Co-Polymer Technology.
Product Highlights
Product Description
INTERGRANDE -0720 is an effective and long lasting Anti-Bacterial, Anti-Fungi, Anti-Virus
solution for protecting surfaces from adverse bacterial
activities especially against Staphylococcus aureus and No added Anti-Bacterial Additives
E. coli and most common fungi like Aspergillus niger,
Penicillium sp. Gliocladium sp. Additionally, it is has antiviral Excellent Water Repellency and Moisture Resistance
properties. Along with other performance properties it gives
superior aesthetic finish. No Leaching and Trans-Dermal Absorption
INTERGRANDE - 0720 is a result of the Advanced Grafted Copolymer Non-Hazardous, Non-Toxic, Zero VOC Green Coating
Molecule which is the company's Patented Technology. The sharp Formulation Greenovoc
Advanced Grafted Copolymer Molecules in the thin film polymer
coating tear open the cell walls of the micro-organisms destroying Excellent Retention of Surface Properties and
them and rendering them harmless. Enhanced Life Cycle Performance
100% washable with Water, Detergents and
other Industrial Cleaning Agents
Superior Scratch Resistant Properties
No Dirt Pick-up
Eco-friendly Excellent Quality Perfect Solution
28 Lane-3, Kshipra Sahaniwas Society, www.econova.co.in econova_systems
Karvenagar, Pune-411052, Maharashtra
8855944688 / 9822793950 [email protected] Econova Systems Private
020-65005595
[email protected] Limited
High Performance Surface coatings.
Curing time:
Drying times are generally related to air circulation, temperature, film thickness and number of coats and will be
affected correspondingly. The figures given in the table are typical with good ventilation (outdoor exposure or free
circulation of air)
Substrate Temperature -10°C 0°C 10°C 23°C 40°C
Touch Dry (minutes) 60 50 40 30 15
Dryness for recoating (minutes) 60 60 60 30 30
Hard Dry/ Complete Cure 24 hours
Performance Properties:
Performance Test Test STD. ACTUAL
Anti-Bacterial/ Organism AATCCTM >99.9%
Property against 100 - 2012 Reduction of Organisms/
Various Organisms Bacteria
Anti-Fungal Properties ASTM Growth Rate
G21-2015 Rating - 0
Overall Migration IS:9845:1998 NIL
Green Features: Application Substrates:
• ZeroVOC • Concrete
• NoOdour • Ferrous & Non-Ferrous Metals
• NoFumes • Fibre/ Plastic
• Non-Toxic- Ro HS Compliant • Wood
• Glass
• Gypsum
• Plaster of Paris
Film thickness and Application Data: Application Methods:
spreading rate:
Spray - Use Airless Spray or Air
Mixing Ratio - Single Pack
Assisted Spray.
Film Thickness - 50 Microns/ Coat System, Ready to Use
Brush - Care must be taken to
achieve the specified Dry Film
Theoretical Spreading Rate - 11 m2 Pot life - Not Applicable
Thickness.
per Kg/Coat
Roller - Care must be taken to
apply sufficient material in order to
achieve the specified Dry Film
Thickness.
Guiding Data Airless
Surface Preparation: Spray:
All surfaces should be clean, dry,
smooth and free from Pressure at Nozzle 15 MPa (150 Health and safety:
contamination. kg/cm2, 2100 psi)
Nozzle Tip 0.43-0.79 mm
Please observe the precautionary
(0.017-0.031")
notices displayed on the container.
Spray Angle 40-80°
Use under well ventilated condi-
tions. Do not breathe or inhale mist.
Filter Check to ensure that filters
Avoid skin contact. Spillage on the
Application Procedure: are clean.
skin should immediately be
removed with suitable cleanser,
i) Open the lid and stir contents soap and water. Eyes should be well
slowly. flushed with water and medical
ii) Do not mix Water or Solvent in the attention sought immediately. For
coating. detailed information on the health
iii) Prepare surface by sanding using
Storage: and safety hazards and precautions
suitable tools to make it free from for use of this product, we refer to
loose particles and foreign deposits. The product must be stored in the Material Safety Data Sheet.
iv) Apply first coat on well prepared accordance with national regula-
surface uniformly to build DFT of 45 tions. Keep the containers in a dry,
to 50 Microns. cool, well ventilated space and
v) Allow to dry for 30 minutes. away from source of heat and
ignition. Containers must be kept
vi) Apply second coat uniformly to get
desired aesthetic finish. tightly closed.
Packing size:
20/10/5 Kg Plastic Pails
Disclaimer:
The information in this data sheet is given to the best of our knowledge based on laboratory testing and practical
experience. However, as the product can be used under conditions beyond our control, we can only guarantee the
quality of the product itself. We also reserve the right to change the given data without notice. Minor product variations
may be implemented in order to comply with local requirements.
THIS DATA SHEET SUPERSEDES THOSE PREVIOUSLY ISSUED
