Scribd
Upload
17 views2 pages

NVent HOFFMAN Hazloc Cable Glands For Non Armored Cable Ex D e TB Brass M32x1 5

Hazloc Cable Glands are designed for non-armored cables in hazardous areas, providing strain relief and sealing with ATEX and IEC certifications. They are suitable for use in various environments, with features including a wide clamping range and multiple thread types. The product is made of brass, has a nickel-plated finish, and operates within a temperature range of -40°C to 80°C.

Uploaded by

Huan Trinh Van
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
17 views2 pages

NVent HOFFMAN Hazloc Cable Glands For Non Armored Cable Ex D e TB Brass M32x1 5

Hazloc Cable Glands are designed for non-armored cables in hazardous areas, providing strain relief and sealing with ATEX and IEC certifications. They are suitable for use in various environments, with features including a wide clamping range and multiple thread types. The product is made of brass, has a nickel-plated finish, and operates within a temperature range of -40°C to 80°C.

Uploaded by

Huan Trinh Van
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

We connect and protect

Hazloc Cable Glands for Non-Armored Cable


(Ex d/e/tb),Brass,M32x1.5

CATALOG NUMBER

EBU3MBNCWCLE
Hazloc cable glands provide strain relief, sealing and secure
entry of cables into enclosures or electrical equipment in
hazardous areas. Suitable for Zone 1, 2, 21 or 22 with ATEX
and IEC certifications, these cable glands are reliable to
protect critical processes and people where explosive gas
and dust may be present. Available in various materials,
thread types and sizes, our hazloc cable glands are
designed to be used in many applications and under
extreme environments.

INDUSTRY STANDARDS

II2GD Ex d IIC Gb, Ex e IIC Gb, Ex tb IIIC Db IP66/68


Approved to Test Standards: IEC/EN 60079-0, IEC/EN
60079-1, IEC/
EN 60079-7, IEC/EN 60079-31, UL2225, CAN/CSA-C22.2
No.60079-
0, CAN/CSA-C22.2 No.60079-7, CAN/CSA-C22.2 No.60079-
31
Ingress Protection: IP66/68 (EN60529)
Certificate No.: IMQ 13 ATEX 018X / IECEx IMQ 13.0006X
Suitable for use in:
Zone 1 and 2, Gas Group IIC
Zone 21 and 22, Dust Group IIIC
UL Listing No: E474828. Suitable for use in:
Class I, Zone 1, AEx e IIC
Class I, Zone 2, AEx e IIC
Zone 22, AEX tc IIIC

FEATURES
Suitable for non-armored cables in flameproof (ex d), increased safety (ex e) and dust (ex tb) applications

Allow for a wider clamping range in a single gland with 3 levels of removable seals

All metric thread cable glands are packaged as kits; each kit includes a chloroprene washer, a locknut and an earthtag

"All NPT thread cable glands are packaged as kits; each kit includes a locknut and an earthtag (except for NPT 3/8"" cable
glands which do not include locknuts or earthtags)"

Available in Metric (M) and NPT (N) thread type


Operating temperature from -40 C to 80 C with chloroprene seal and -60 C to 80C with silicon seal in Ex d/e/tb application

Operating temperature from -40 C to 80 C with chloroprene seal and -60 C to 140 C with silicon seal in Ex e/tb application

PRODUCT ATTRIBUTES
Article Number: 30626

Material: Brass

Finish: Nickel Plated

Thread Size: M32 x 1.5

Clamping Range: 0.55 – 0.94in

Seal: Chloroprene

Weight: 0.2lb

WARNING
nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper
installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause
product malfunction, property damage, serious bodily injury and death and/or void your warranty.

Our powerful portfolio of brands:

CADDY ERICO HOFFMAN ILSCO SCHROFF TRACHTE

©2025 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of
their respective owners. nVent reserves the right to change specifications without notice.

This document is system-generated. nVent.com/HOFFMAN |2

You might also like