Starting Formulation

SF 1047
High Solids Red Iron Oxide Epoxy Primer
EPON™ Resin 874-CX-90 / EPIKURE™ Curing Agent 3140

Formula Material Supplier Pounds Gallons

Part A

EPON Resin 874-CX-90 Westlake Epoxy 263.0 28.85

Beetle U216-8 Cytec Industries. 12.0 1.41

Xylene Shell Chemical Company 75.5 10.49

MIBK Shell Chemical Company 60.4 9.10

PGME Acetate 15.1 1.86

Zinc Phosphate J-0852 Davis Colors 176.5 6.74

10 ES WOLLASTOCOAT NYCO Minerals, Inc. 176.5 7.29

Sparmite Harcros Pigments Inc. 233.5 6.35

MicroMica C-3000 KMG Minerals, Inc. 38.8 1.36

Copperas R-5098 Harcros Pigments Inc. 38.7 0.90

High Speed Disperse to a Texture of 5-6 N. S.

Bentone SD-2 Elementis Specialties 9.3 0.65

Total Part A 1099.3 75.00

Part B

EPIKURE Curing Agent 3140 Westlake Epoxy 132.0 16.32

Xylene Shell Chemical Company 42.9 5.95

n-Butanol Shell Chemical Company 18.4 2.73

Total Part B 193.3 25.00

Total Part A & B 1292.6 100.0

Mixing Instructions
Pounds Gallons

Part A 1099.3 75.00

Part B 193.3 25.00

Generated: May 15, 2024

Issue Date:
Revision:
® and ™ Licensed trademarks of Westlake Inc.
DISCLAIMER

The information provided herein was believed by Westlake. (“Westlake”) to be accurate at the time of preparation or prepared from sources believed to be reliable, but it is the responsibility of
the user to investigate and understand other pertinent sources of information, to comply with all laws and procedures applicable to the safe handling and use of the product and to determine
the suitability of the product for its intended use. All products supplied by Westlake are subject to Westlake’s terms and conditions of sale. WESTLAKE MAKES NO WARRANTY, EXPRESS OR
IMPLIED, CONCERNING THE PRODUCT OR THE MERCHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE OR CONCERNING THE ACCURACY OF ANY INFORMATION
PROVIDED BY WESTLAKE, except that the product shall conform to Westlake’s specifications. Nothing contained herein constitutes an offer for the sale of any product.
Page 1 of 3
 Part A + B 1292.6 100.0

Typical Formulation Table 1 / Formulation Properties

Properties

Units Value

Mix ratio Part A : Part B By volume 3:1

By weight 5.69 : 1.0

Total weight solids % 81.2

Total volume solids % 65.4

Pigment volume concentration (PVC) % 35.0

Volatile Organic Compound (VOC) lb/gal 2.43

g/L 292

Induction Time min. 30

Viscosity @ 25°C
Part A + Part B KU 85

Typical Film Table 2 / Film Properties

Properties

Drawndown on CRS. Cured for 7 days at 77 °F and 55% relative humidity.

Units Value

Pigment:binder ratio % 1.72

Curing agent, based on solids phr 56

Pot life from 85-130 KU hrs 6

Pounds/gallon lbs/gal 12.92

Dry film thickness mils 1.5

Set-to-touch hrs 1.0

Cotton free hrs 7.5

Thru-dry hrs 18.0

Pencil hardness H

Impact resistance, direct/reverse 52/4

Flexibility Pass 1/4

Salt spray testing (500 hrs) 2F-2M

Water resistance (500 hrs at 160 °F) 4M

Adhesion 5A

Storage Recommendations regarding storage conditions can be obtained by visiting our web site
at www.westlakeepoxy.com

General Information

Generated: May 15, 2024

Issue Date:
Revision:
® and ™ Licensed trademarks of Westlake Inc.
DISCLAIMER

The information provided herein was believed by Westlake. (“Westlake”) to be accurate at the time of preparation or prepared from sources believed to be reliable, but it is the responsibility of
the user to investigate and understand other pertinent sources of information, to comply with all laws and procedures applicable to the safe handling and use of the product and to determine
the suitability of the product for its intended use. All products supplied by Westlake are subject to Westlake’s terms and conditions of sale. WESTLAKE MAKES NO WARRANTY, EXPRESS OR
IMPLIED, CONCERNING THE PRODUCT OR THE MERCHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE OR CONCERNING THE ACCURACY OF ANY INFORMATION
PROVIDED BY WESTLAKE, except that the product shall conform to Westlake’s specifications. Nothing contained herein constitutes an offer for the sale of any product.
Page 2 of 3
These are starting formulations and are not proven in the user’s particular application but are simply meant to demonstrate the efficacy of the
products and to assist in the development of the user’s own formulation. It is the user’s responsibility to fully-test and qualify the formulation,
along with the ingredients, methods, applications or equipment identified herein (“Information”), by the user’s knowledgeable formulator or
scientist, and to determine the appropriate use conditions and legal restrictions, prior to use of any Information.

Safety, Storage & Handling

Please refer to the MSDS for the most current Safety and Handling information.

Exposure to these materials should be minimized and avoided, if feasible, through the observance of proper precautions, use of appropriate
engineering controls and proper personal protective clothing and equipment, and adherence to proper handling procedures. None of these
materials should be used, stored, or transported until the handling precautions and recommendations as stated in the Material Safety Data Sheet
(MSDS) for these and all other products being used are understood by all persons who will work with them. Questions and requests for
information on Westlake Epoxy products should be directed to your Westlake Epoxy sales representative, or the nearest Westlake Epoxy sales
office. Information and MSDSs on non-Westlake Epoxy products should be obtained from the respective manufacturer.

Contact Information
For product prices, availability, or order placement, please contact customer service:
www.westlakeepoxy.com/Contacts/

For literature and technical assistance, visit our website at:www.westlakeepoxy.com

Generated: May 15, 2024

Issue Date:
Revision:
® and ™ Licensed trademarks of Westlake Inc.
DISCLAIMER

The information provided herein was believed by Westlake. (“Westlake”) to be accurate at the time of preparation or prepared from sources believed to be reliable, but it is the responsibility of
the user to investigate and understand other pertinent sources of information, to comply with all laws and procedures applicable to the safe handling and use of the product and to determine
the suitability of the product for its intended use. All products supplied by Westlake are subject to Westlake’s terms and conditions of sale. WESTLAKE MAKES NO WARRANTY, EXPRESS OR
IMPLIED, CONCERNING THE PRODUCT OR THE MERCHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE OR CONCERNING THE ACCURACY OF ANY INFORMATION
PROVIDED BY WESTLAKE, except that the product shall conform to Westlake’s specifications. Nothing contained herein constitutes an offer for the sale of any product.
Page 3 of 3