PTI PAP ...

P10 series bushes (EGB E40 / SF-1 / PCM E / PG F)

maintenance-free

Characteristics

1. PTFE 0,01 - 0,03 mm

2. Porous bronze 0,20 - 0,30 mm

3. Steel backing 0,40 - 2,20 mm

4. Tin or copper plating ~ 0,005 - 0,008 mm

Usage:

PAP ... P10 bushes are widely used in hydraulic vehicles, automobiles, motorcycles, agricultural machines, textile
machines, printing machines, gymnastic equipment and many other applications. PAP ... P10 bushes generally have
good initial adaptability with a wear of 0,01 ~ 0,02mm. During the adjustment period a part of the surface in PTFE is
deposited on the shaft or on the contact surface (fig. 1) forming a self-lubricating film capable of reducing friction and
wear. After this initial phase and with progressive increases in the functioning hours, once 80% o the PTFE is
consumed, the bush is considered depleted and therefore should be replaced. The roughness of the surface must
generally be inferior to 0,8 μ. The typical wear curve is shown in fig. 2.

Advantages:

• exempt from lubrication.

• elevated load capacities - 140 N/mm2.
• elevated flow and low friction coefficients both static and dynamic (no stick-slip effect).
• operating temperature range from -195 °C to +280 °C.
• low vibration, noise and pollution. Possibility to use coupling metals with low hardness.
• light weight materials, compact and with minimum encumbrance.
• ease of mounting
• oil or water are not absorbed, presenting low expansion, high conductibility and excellent thermal stability.

technical changes reserved, some items may not be available from stock. PTI Europa A/S - pti.eu
 PTI PAP ... P10 series bushes (EGB E40 / SF-1 / PCM E / PG F)
maintenance-free

Load capacity:

The load capacity of the bush is expressed using the load factor Pv (N/mm2 • m/s) where P represents the specific
load and v the velocity. The specific maximum load applicable in constant conditions can reach a value of (140
N/mm2), while in dynamic conditions, therefore with rotary and oscillating movement, the specific load limit can
decrease to 56 N/mm2. The limit of the load can be influenced by the temperature: it is important to maintain
constant temperature in order to obtain the best performances and therefore to increase the duration of the bush. If
we consider F as total load, d the internal diameter and b the length, the load limit will be equal to:

p = F / (d*b)

The lubrication can influence the load factor too: in fact the maximum specific load p depends on the conditions of
the greasing, as shown below.

Lubricants:

Despite the material used for the construction of the PAP ... P10 bushing is of good quality and usable when dry,
when used in the presence of fluids, liquids and or lubricants the limits Pv increase sensibly; in fact, the presence of
fluids allous the dispersion of the friction heat possible and the contact between the surfaces, increasing the useful
duration of the bush. The presence of lubricating fluids creates the adapt conditions for the hydrodynamic
functioning, incrementing noticeably the sliding velocity bling the specific load the seme. It is worthwhile to always
verify the compatibility of the bush with the fluid present because an undesirable effect could be experienced in the
use of one fluid rather than another. It is advisable to try to immerge hall of the bush in the fluid for approximately 2
weeks to verify that the bush remains unchanged in every part.

technical changes reserved, some items may not be available from stock. PTI Europa A/S - pti.eu
 PTI PAP ... P10 series bushes (EGB E40 / SF-1 / PCM E / PG F)
maintenance-free

Temperature:

In case the temperature remains between 0 °C and 100 °C, the impact of the friction coefficient is rather limited;
once this limit is surpassed, the friction coefficient increases rapidly by approximately 50%. With an estimated
temperature of over 200 °C and with costant load factor, the duration of the bush would be reduced by 80% with
respect to that registered at 20 °C (see table below).

Limit Pv at various temperatures

Limit Pv (N/mm2 * m/s)
Speed (m/s) Load (N/mm2)
20°C 100°C 200°C
0,0001 140 0,014 0,014 0,014
0,0010 50 0,500 0,300 0,100
0,0100 6,0 0,600 0,350 0,120
1,0000 1,2 1,200 0,720 0,240
5,0000 0,4 2,000 1,000 0,400

PAP … P10 Bushes tolerances:

Outer Diameter Outer diameter tolerances Thickness tolerances Chamfer dimensions

D (mm) D (mm) SB (mm) SB (mm) f1 (mm) f2 (mm)
+ 0,055 - 0,000 - 0,05
≤ 10 0,75 0,75 0,5 ± 0,3
+ 0,025 - 0,020 - 0,30
+ 0,065 + 0,005 - 0,1
10 < ≤ 18 1 1 0,6 ± 0,4
+ 0,030 - 0,020 - 0,4
+ 0,075 + 0,005 - 0,1
18 < ≤ 30 1,5 1,5 0,6 ± 0,4
+ 0,035 - 0,025 - 0,6
+ 0,085 + 0,005 - 0,1
30 < ≤ 50 2 2 1,2 ± 0,4
+ 0,045 - 0,030 - 0,7
+ 0,100 + 0,005 - 0,2
50 < ≤ 80 2,5 2,5 1,8 ± 0,6
+ 0,055 - 0,040 - 1,0
+ 0,120 - 0,010 - 0,2
80 < ≤ 120 2,5 2,5 1,8 ± 0,6
+ 0,070 - 0,060 - 1,0
+ 0,170 - 0,035 - 0,2
120 < ≤ 180 2,5 2,5 1,8 ± 0,6
+ 0,100 - 0,085 - 1,0
+ 0,255 - 0,035 - 0,2
180 < ≤ 305 2,5 2,5 1,8 ± 0,6
+ 0,125 - 0,085 - 1,0

Tolerance values of metric bushings PAP … P10 comply with standard ISO 3547-1:2006

Recommended mounting tolerances:

Shaft: Bore:
< 5 mm h6 < 4 mm H6
5 - 75 mm f7 > 4 mm H7
> 75 mm h8

technical changes reserved, some items may not be available from stock. PTI Europa A/S - pti.eu
 PTI PAP ... P10 series bushes (EGB E40 / SF-1 / PCM E / PG F)
Maintenance-free

Dimensions (mm) Dimensions (mm)

Product No. d D L±0,25 Product No. d D L±0,25

PAP0404-P10 4 5,5 4 PAP1612-P10 16 18 12
PAP0606-P10 6 8 6 PAP1615-P10 16 18 15
PAP0608-P10 6 8 8 PAP1620-P10 16 18 20
PAP0610-P10 6 8 10 PAP1625-P10 16 18 25
PAP0710-P10 7 9 10 PAP1815-P10 18 20 15
PAP0808-P10 8 10 8 PAP1820-P10 18 20 20
PAP0810-P10 8 10 10 PAP1825-P10 18 20 25
PAP0812-P10 8 10 12 PAP2010-P10 20 23 10
PAP1008-P10 10 12 8 PAP2015-P10 20 23 15
PAP1010-P10 10 12 10 PAP2020-P10 20 23 20
PAP1012-P10 10 12 12 PAP2025-P10 20 23 25
PAP1015-P10 10 12 15 PAP2030-P10 20 23 30
PAP1020-P10 10 12 20 PAP2215-P10 22 25 15
PAP1208-P10 12 14 8 PAP2220-P10 22 25 20
PAP1210-P10 12 14 10 PAP2225-P10 22 25 25
PAP1212-P10 12 14 12 PAP2230-P10 22 25 30
PAP1215-P10 12 14 15 PAP2415-P10 24 27 15
PAP1220-P10 12 14 20 PAP2420-P10 24 27 20
PAP1225-P10 12 14 25 PAP2425-P10 24 27 25
PAP1310-P10 13 15 10 PAP2430-P10 24 27 30
PAP1410-P10 14 16 10 PAP2510-P10 25 28 10
PAP1412-P10 14 16 12 PAP2515-P10 25 28 15
PAP1415-P10 14 16 15 PAP2520-P10 25 28 20
PAP1420-P10 14 16 20 PAP2525-P10 25 28 25
PAP1425-P10 14 16 25 PAP2530-P10 25 28 30
PAP1510-P10 15 17 10 PAP2540-P10 25 28 40
PAP1512-P10 15 17 12 PAP2550-P10 25 28 50
PAP1515-P10 15 17 15 PAP2820-P10 28 32 20
PAP1520-P10 15 17 20 PAP2830-P10 28 32 30
PAP1525-P10 15 17 25 PAP3015-P10 30 34 15
PAP1610-P10 16 18 10 PAP3020-P10 30 34 20

technical changes reserved, some items may not be available from stock. PTI Europa A/S - pti.eu
 PTI PAP ... P10 series bushes (EGB E40 / SF-1 / PCM E / PG F)
Maintenance-free

Dimensions (mm) Dimensions (mm)

Product No. d D L±0,25 Product No. d D L±0,25

PAP3025-P10 30 34 25 PAP6560-P10 65 70 60
PAP3030-P10 30 34 30 PAP6570-P10 65 70 70
PAP3040-P10 30 34 40 PAP7040-P10 70 75 40
PAP3230-P10 32 36 30 PAP7050-P10 70 75 50
PAP3240-P10 32 36 40 PAP7070-P10 70 75 70
PAP3520-P10 35 39 20 PAP7540-P10 75 80 40
PAP3530-P10 35 39 30 PAP7550-P10 75 80 50
PAP3540-P10 35 39 40 PAP7560-P10 75 80 60
PAP3550-P10 35 39 50 PAP7580-P10 75 80 80
PAP4030-P10 40 44 30 PAP8040-P10 80 85 40
PAP4040-P10 40 44 40 PAP8060-P10 80 85 60
PAP4050-P10 40 44 50 PAP8080-P10 80 85 80
PAP4530-P10 45 50 30 PAP80100-P10 80 85 100
PAP4540-P10 45 50 40 PAP8560-P10 85 90 60
PAP4550-P10 45 50 50 PAP85100-P10 85 90 100
PAP5020-P10 50 55 20 PAP9050-P10 90 95 50
PAP5030-P10 50 55 30 PAP9060-P10 90 95 60
PAP5040-P10 50 55 40 PAP90100-P10 90 95 100
PAP5060-P10 50 55 60 PAP9560-P10 95 100 60
PAP5540-P10 55 60 40 PAP95100-P10 95 100 100
PAP5560-P10 55 60 60 PAP10050-P10 100 105 50
PAP6020-P10 60 65 20 PAP10060-P10 100 105 60
PAP6030-P10 60 65 30 PAP100115-P10 100 105 115
PAP6040-P10 60 65 40 PAP10560-P10 105 110 60
PAP6060-P10 60 65 60 PAP105115-P10 105 110 115
PAP6070-P10 60 65 70 PAP11060-P10 110 115 60
PAP6540-P10 65 70 40 PAP110115-P10 110 115 115
PAP6550-P10 65 70 50

technical changes reserved, some items may not be available from stock. PTI Europa A/S - pti.eu