Takfly Group

Fibre Optic Cable

Catalogue
 Fibre Optic Cable Catalogue

Contents
Secondary Coated Fibre 04
Simplex 08
Zip Duplex 09
Flat Duplex 10
Round Duplex 11
Flat Ribbon 4-12 Fibres 12
Tight Buffered Distribution 4-24 Fibres 14
Tight Buffered Distribution Multi-core 36-96 Fibres 15
Breakout 4-24 Fibres 16
Single Loose Tube 4-24 Fibres 18
Multi Loose Tube 24-144 Fibres 19
Steel Tape Armoured Single Loose Tube 2-24 Fibres 20
Steel Tape Armoured Multi Loose Tube (CST) 24-144 Fibres 21
Dry Single Loose Tube 2-24 Fibres 22
Dry Multi Loose Tube 24-144 Fibres 23
Dry Core Blowing Cable 12-144 Fibres 24
Multi Loose Tube Double Jacket 24-144 Fibres 25
Military Ruggedised Fibre Optic Cable 26
ADSS MLT Fibre Optic Cable 2-144 Fibres 28
Aerial Cable Figure 8 Fibre Optic Cable 2-60 Fibres 29
Non-Metallic Direct Burial Cable Telecoms 12-144 Fibres 30
Armoured Direct Burial Cable Telecoms 12-144 Fibres 31
Double Jacket Direct Burial Cable Telecoms 12-144 Fibres 32
Aerial Cable Accessories 33
Fibre in a Box 34
Cable Preparation Tools 36
Cleaning Products 39
Termination Kits 40
Test Equipment 41
 Fibre Optic Cable Catalogue

Labelling Conventions
The following icons are used throughout this catalogue to represent the fibre optic cable specification, features and value added services that R_i djw
can offer:

Fibre Specifications

Fibre Cable Features

Water Resistant Fire Retardant Rodent Resistant External Use Internal Use

Rapid Deployment Ruggedised Standard Length Telecommunications

LSZH (Low Smoke Zero Halogen) Performance Requirements

► IEC 61034-1 & 2 Smoke Emission
► IEC 60332-1 Flammability
► IEC 60754- 1 Toxicity
► IEC 60754- 2 Acid Gas Emission
► Limiting Oxygen Index (LOI) not less than 30 in accordance with ISO 4589-2 or equivalent.
 Fibre Optic Cable Catalogue | Pigtail Cables 

Secondary Coated 900µm Fibre - Ideal for Pigtails

Optronics secondary coated 900µm fibres are ideal for use within splice trays or in other
protected environments. These fibres are available in either standard or easy-strip formats
and in twelve different colours for easy identification.

Technical Specifications
DESCRIPTION 1-CORE
Outer Diameter mm 0.9
Weight kg/km 0.9
Pigtail
Max. Load (installation) N 6
Max. Load (installed) N 3
Min. Bend Radius 30mm
(installation)
Min. Bend Radius (installed) 30mm
Temperature Range °C -20~+70

Plastic Storage Case

Part Number Generator
Fibre Type Colour Strip Option

OM1 = OM1B RD = RED -C = TIGHT BUFF-

OM2 = OM2B GN = GREEN ERED
OS1/OS2 = OS1/ BL = BLUE EASY-C = EASY
OS2 B OR = ORANGE STRIP
BR = BROWN
GY = GREY
YE = YELLOW
PK = PINK Plastic Reel
WH = WHITE
BK = BLACK
AQ = AQUA
*OM3 also available on application PU = PURPLE

Example:

OM1B PU EASY-C

(OM1 Purple 1-Core Easy Strip)

Colour Options

900µm Buffered Pigtail Fibre Applications

900µm OM1 62.5/125, OM2 50/125, OM3 50/125 multimode or OS1/OS2 (ITU-T
► Pigtails
G.652D) singlemode 900µm buffered pigtail range.
► Internal interconnect
► Choice of fibre types
► Ideal for a wide range of telecoms, datacoms and
► Choice of buffering material and stripping options
process control applications where ruggedisation
► Robust 900µm secondary coated fibres for ease of termination
is required
► Standard white buffer colour
► Also available in 12 standard colours on request ► Data centres

► Suitable for repeated handling in patch panels

Internal Use Standard Length and racks
► Suitable for all standard connector types.
 Fibre Optic Cable Catalogue

Primary Buffered 250µm Optical Fibres

G.652 D OS1/OS2 Singlemode Optical Fibre Applications
Optronics specification for ITU-T G.652 D 9/125 singlemode optical fibre exceeds ► Operational in the entire 1260nm to 1625nm
the OS2 singlemode requirement(s). Low Water Peak (LWP) singlemode optical wavelength range
fibre with doped silica core and silica cladding; dual layer UV cured acrylic resin ► Low chromatic dispersion in the 1310nm
primary coatings. All fibre parameters meet or exceed the following LWP singlemode operating window
requirements. ► Low attenuation at the 1383 nm water peak
region
Detailed technical specifications are available on request:
► Operational in the 1360nm to 1460 nm
wavelength extended band
• ITU-T G.652 D
► All OS2 Optronics cable constructions including
• IEC 60793-2-50 type B1.3
tight buffered, loose tube and ribbon
• ISO/IEC 11802 OS1/OS2
• TIA/EIA 492-CAAB
► Supports 1 Gb/s up to an indicative 5 km in data
networks
• Telcordia GR-20-CORE
► Supports high speed multi channel video, data
Internal Use Standard Length and voice services in metropolitan and access
networks
► ATM, SONET and WDM, CWDM

62.5/125 OM1 Multimode Optical Fibre Applications

Optronics specifications for standard OM1 62.5/125 graded-index multimode optical ► Gigabit Ethernet in high speed LAN networks,
fibre with doped silica core and silica cladding. Dual layer UV cured acrylic resin over an indicative 275m link length at 850 nm
primary coatings. All fibre parameters meet or exceed the following 62.5/125 requirements. wavelength
► Legacy networks including Ethernet, Fast
Detailed technical specifications are available on request: Ethernet and FDDI
► All OM1 Optronics cable constructions, including
• ITU-T G.651 tight buffered, loose tube and ribbon
• IEC 60793-2-10 type A1b
► Data centres
• ISO/IEC 11802 OM-1 Internal Use Standard Length
• TIA/EIA-492AAAA ► Premises cabling in data networks including
• Telcordia GR-20-CORE backbone, riser and horizontal
► Supports video, data and voice services

50/125 OM2, OM3 & OM4 Multimode Optical Fibre Applications

Optronics specification for standard OM2, OM3 and OM4, 50/125 graded-index multimode ► OM2 for use in 1 Gb/s high speed LAN networks
optical fibre with doped silica core and silica cladding. Dual layer UV cured acrylic resin primary over a 550m indicative link length at 850nm
coatings. All fibre parameters meet or exceed the following generic and laser-optimised 50/125 wavelength using a laser launch
requirements. ► OM3 for use in 10 Gb/s high speed LAN
networks over a 300m indicative link length at
Detailed technical specifications are available on request: 850nm wavelength using a laser launch
► OM3 for use in 1 Gb/s high speed LAN networks
• ITU-T G.651 over a 1000m indicative link length at 850 nm
• OM2 to IEC 60793-2-10 type A1a.1. OM3 to IEC 60793-2-10 type A1a.2. wavelength using a laser launch
OM4 to IEC 60793-2-10 type A1a.3. ► OM4 for use in 10 Gb/s high speed LAN
• ISO/IEC 11801 networks over a 550m indicative link length at
• OM2 to TIA/EIA-492AAAB. OM3 to TIA / EIA-492AAAC. OM4 to TIA / EIA-492AAAD 850nm wavelength using a laser launch
• Telcordia GR-20-CORE ► OM4 for use in 1 Gb/s high speed LAN networks
over a 1000m indicative link length at 850 nm
wavelength using a laser launch
► High speed and legacy networks including
Gigabit Ethernet, Fast Ethernet and Ethernet
► All OM2, OM3 & OM4 Optronics cable
constructions including tight buffered, loose tube
and ribbon
► Data centres

► Premises cabling in data networks including

backbone, riser and horizontal
Internal Use Standard Length
► Supports video, data and voice services
 Fibre Optic Cable Catalogue | Patch Cables 

Cable for Patchcords

The cables are jacketed in a Low Smoke Zero Halogen material to reduce the emission of
toxic fumes in the event of fire and to comply with international fire regulations.

Optronics fibre optic patch cables are ideal for patchcords and pigtails which are utilised in
equipment rooms, data cabinets and at user outlets.

“Our Optronics fibre optic patchcables

meet the demands posed by the
equipment cabinet environment. We
offer connectivity ready cables to
achieve maximum fibre density with the
latest specification optical fibres and fire
hazard resistance.”
 Fibre Optic Cable Catalogue | Patch Cables

Simplex Fibre Optic Patch Cable

Optronics simplex fibre optic patch cable is ideal for use in office LAN connections,
patchcords, pigtails and internal point-to-point links where frequent handling is likely
(e.g. data cabinets, equipment rooms, user outlets). Utilising 600µm or 900µm buffered
fibre, the cable is suitable for use with industry standard connectors and can be easily made
into a patchcord.

Applications
► Patchcords

► Pigtails

► Internal inter-connections

Features
► Choice of fibre types

► Choice of cable outer diameters

► High strength aramid yarn strength members for ease of handling

► Robust 600μm tight buffered fibres for ease of termination

► Easy stripping

► LSZH jacket for internal use

LSZH Jacket
Tight Buffer Fibre
Aramid Yarn Strength Member

Technical Specifications
Fire Retardant
1-CORE 1-CORE 1-CORE 1-CORE 1-CORE
DESCRIPTION
LSZH LSZH LSZH LSZH LSZH
Outer Diameter mm 1.6 1.8 2.0 2.4 3.0
Weight kg/km 2.9 3.2 3.5 5.0 6.8
Internal Use
Max. Load (installation) N 80 80 100 100 150
Max. Load (installed) N 40 40 60 60 80
Min. Bend Radius Times
20 20 20 20 20
(installation) diameter
Standard Length
Min. Bend Radius Times
10 10 10 10 10
(installed) diameter
Fire Performance LSZH LSZH LSZH LSZH LSZH
Operating Temp. °C -20~+60 -20~+60 -20~+60 -20~+60 -20~+60
Storage Temp. °C -20~+70 -20~+70 -20~+70 -20~+70 -20~+70
Installation Temp. °C -20~+60 -20~+60 -20~+60 -20~+60 -20~+60
Crush Resistance N/100mm 500 500 500 500 500 Pre-terminated cables are
available in a wide range of
lengths.
Ordering Information
PRODUCT PRODUCT
PART NO. PART NO.
DESCRIPTION DESCRIPTION
OM1 62.5/125 μm Multimode OM3 50/125 μm Multimode
1-Core 2.0mm OM1SIMOR2MM6-C 1-Core 2.0mm OM3SIMAQ2MM6-C
1-Core 3.0mm OM1SIMOR-C 1-Core 3.0mm OM3SIMAQ-C
OM2 50/125 μm Multimode OM4 50/125 μm Multimode
1-Core 2.0mm OM2SIMOR2MM6-C 1-Core 2.0mm OM4SIMAQ2MM6-C
1-Core 3.0mm OM2SIMOR-C 1-Core 3.0mm OM4SIMAQ-C
OS1/OS2 /OS2 9/125 μm Singlemode Other diameters are available upon request.
OS1/OS2 SIMY-
1-Core 2.0mm
E2MM6-C
1-Core 3.0mm OS1/OS2 SIMYE-C
 Fibre Optic Cable Catalogue | Patch Cables 

Zip Duplex Fibre Optic Patch Cable

Optronics zip duplex fibre optic patch cable is constructed with two simplex units joined
together with a central web. Ideal for use in office LAN connections, patchcords, pigtails and
internal point-to-point links where frequent handling is likely (e.g. data cabinets, equipment
rooms, user outlets). Utilising 600µm or 900µm buffered fibre, the cable is suitable for use with
industry standard connectors and can be easily made into a patchcord.

Applications
► Patchcords

► Pigtails

► Internal inter-connections

Features
► Choice of fibre type

► Choice of outer diameter

► High strength aramid yarn strength members for ease of handling

► Easy to strip

► LSZH jacket

LSZH Jacket

Tight Buffer Fibre

Aramid Yarn
Strength Member

Technical Specifications
Fire Retardant
DESCRIPTION 2-CORE LSZH 2-CORE LSZH 2-CORE LSZH 2-CORE LSZH
Outer Diameter mm 1.6*3.3 1.8*3.7 2.0*4.1 2.8*5.7
Weight kg/km 5.7 6.7 8.2 13.2
Max. Load (instal-
N 160 160 200 300 Internal Use
lation)
Max. Load (installed) N 80 80 100 160
Min. Bend Radius Times
20 20 20 20
(installation) diameter
Min. Bend Radius Times Standard Length
10 10 10 10
(installed) diameter
Fire Performance LSZH LSZH LSZH LSZH
Operating Temp. °C -20~+60 -20~+60 -20~+60 -20~+60
Storage Temp. °C -20~+70 -20~+70 -20~+70 -20~+70
Installation Temp. °C -20~+60 -20~+60 -20~+60 -20~+60
Crush Resistance N/100mm 1000 1000 1000 1000

Ordering Information
PRODUCT PRODUCT
PART NO. PART NO.
DESCRIPTION DESCRIPTION
OM1 62.5/125 μm Multimode OM3 50/125 μm Multimode
2-Core 2.0mm OM1ZIPOR2MM6-C 2-Core 2.0mm OM3ZIPAQ2MM6-C
2-Core 2.8mm OM1ZIPOR-C 2-Core 2.8mm OM3ZIPAQ-C
OM2 50/125 μm Multimode OM4 50/125 μm Multimode
2-Core 2.0mm OM2ZIPOR2MM6-C 2-Core 2.0mm OM4ZIPAQ2MM6-C
2-Core 2.8mm OM2ZIPOR-C 2-Core 2.8mm OM4ZIPAQ-C
OS1/OS2 /OS2 9/125 μm Singlemode
Other diameters are available upon request.
2-Core 2.0mm OS1/OS2 ZIPYE2MM6-C
2-Core 2.8mm OS1/OS2 ZIPYE-C
10 Fibre Optic Cable Catalogue | Patch Cables

Flat Duplex Fibre Optic Patch Cable

Optronics flat duplex fibre optic patch cable is constructed with two simplex units held
together with an overall LSZH jacket. Ideal for use in office LAN connections, patchcords,
pigtails and internal point-to-point links where frequent handling is likely (e.g. data cabinets,
equipment rooms, user outlets). Utilising 900µm buffered fibre, the cable unit is suitable for use
with industry standard connectors and can be easily made into a patchcord.

Applications
► Patchcords

► Pigtails

► Internal inter-connections

Features
► Choice of fibre type

► Choice of outer diameter

► High strength Aramid yarn strength members for ease of handling

► Easy to strip

► LSZH jacket

► LSZH overall jacket

LSZH Jacket
Simplex LSZH Jacket
Tight Buffer Fibre

Aramid Yarn Strength Member

Rip Cord

Technical Specifications Fire Retardant

DESCRIPTION 2-CORE LSZH 2-CORE LSZH

Outer Diameter mm 3.0 x 5.0 3.8 x 6.6
Internal Use
Weight kg/km 11 24
Max. Load (installation) N 250 250
Max. Load (installed) N 125 125
Min. Bend Radius (instal-
Times diameter 20 20 Standard Length
lation)
Min. Bend Radius (installed) Times diameter 10 10
Fire Performance LSZH LSZH
Operating Temp. °C -20~+60 -20~+60
Storage Temp. °C -20~+70 -20~+70
Installation Temp. °C -20~+60 -20~+60
Pre-terminated cables are
Crush Resistance N/100mm 200 200
available in a wide range of
lengths.
Ordering Information
PRODUCT PRODUCT
PART NO. PART NO.
DESCRIPTION DESCRIPTION
OM1 62.5/125 μm Multimode OM3 50/125 μm Multimode
2-Core 2.0mm OM1FLATORANGE2-C 2-Core 2.0mm OM3FLATAQUA2-C
2-Core 2.8mm OM1FLATORANGE-C 2-Core 2.8mm OM3FLATAQUA-C
OM2 50/125 μm Multimode OM4 50/125 μm Multimode
2-Core 2.0mm OM2FLATORANGE2-C 2-Core 2.0mm OM4FLATAQUA2-C
2-Core 2.8mm OM2FLATORANGE-C 2-Core 2.8mm OM4FLATAQUA-C
OS1/OS2 /OS2 9/125 μm Singlemode
OS1/OS2 FLATYEL- Other diameters are available upon request.
2-Core 2.0mm
LOW2-C
OS1/OS2 FLATYEL-
2-Core 2.8mm
LOW-C
 Fibre Optic Cable Catalogue | Patch Cables 11

Round Duplex Fibre Optic Patch Cable

Optronics round duplex fibre optic patch cable is constructed with two tight buffered
fibres protected by aramid yarns and an LSZH jacket. Ideal for use in office LAN
connections, patchcords, pigtails and internal point-to-point links where frequent handling is
likely (e.g. data cabinets, equipment rooms, user outlets). Utilising 600µm or 900µm buffered
fibre, the cable unit is suitable for use with industry standard connectors and can be easily
made into a patchcord.

Applications
► Patchcords

► Pigtails

► Internal inter-connections

Features
► Choice of fibre type

► Choice of outer diameter

► High strength aramid yarn strength members for ease of handling

► Easy to strip

► LSZH jacket

LSZH Jacket

Tight Buffer Fibre

Aramid Yarn Strength Member

Technical Specifications Fire Retardant

DESCRIPTION 2-CORE LSZH 2-CORE LSZH

Outer Diameter mm 3.0 5.0
Internal Use
Weight kg/km 8 20.9
Max. Load (installation) N 190 160
Max. Load (installed) N 80 80
Min. Bend Radius (installation) Times diameter 20 20
Standard Length
Min. Bend Radius (installed) Times diameter 10 10
Fire Performance LSZH LSZH
Operating Temp. °C -20~+60 -20~+60
Storage Temp. °C -20~+60 -20~+70
Installation Temp. °C -20~+60 -20~+60
Crush Resistance N/100mm 1000 1000

Ordering Information
PRODUCT PRODUCT
PART NO. PART NO.
DESCRIPTION DESCRIPTION
OM1 62.5/125 μm Multimode OM3 50/125 μm Multimode
2-Core 5mm OM1ROUNDOR-C 2-Core 5mm OM3ROUNDAQ-C
OM2 50/125 μm Multimode OM4 50/125 μm Multimode
2-Core 5mm OM2ROUNDOR-C 2-Core 5mm OM4ROUNDAQ-C
OS1/OS2 /OS2 9/125 μm Singlemode
2-Core 5mm OS1/OS2 ROUNDYE-C Other diameters are available upon request.
12 Fibre Optic Cable Catalogue | Patch Cables

Flat Ribbon Fibre Optic Patch Cable (4-12 Fibres)

Optronics flat ribbon fibre optic patch cable is constructed with 4 - 12 ribbonised optical
fibres protected by soft aramid yarns and an LSZH jacket. Ideal for use in office LAN
connections, patchcords and internal point-to-point links where frequent handling is likely (e.g.
data cabinets, equipment rooms, user outlets).

Applications
► Internal inter-connections

Features
► Choice of fibre type

► Choice of outer diameter

► High strength aramid yarn strength members for ease of handling

► Easy to strip

► LSZH jacket

LSZH Outer Jacket

Optical Fibre Ribbon

Aramid Yarn Strength Member

Technical Specifications
Fire Retardant
4-CORE 6-CORE 8-CORE 12-CORE
DESCRIPTION
LSZH LSZH LSZH LSZH
Outer Diameter mm 3.5*2.5 3.8*2.5 4.5*2.5 5.0*2.5
Weight kg/km 14 15 17 19
Internal Use
Max. Load (installation) N 200 200 200 200
Max. Load (installed) N 80 80 80 80
Times
Min. Bend Radius (installation) 35 35 35 35
diameter
Standard Length
Times
Min. Bend Radius (installed) 25 25 25 25
diameter
Fire Performance LSZH LSZH LSZH LSZH
Operating Temp. °C -20~+60 -20~+60 -20~+60 -20~+60
Storage Temp. °C -20~+70 -20~+70 -20~+70 -20~+70
Installation Temp. °C -20~+60 -20~+60 -20~+60 -20~+60
Crush Resistance N/100mm 500 500 500 500 Pre-terminated cables are
available in a wide range of
lengths.
Ordering Information
PRODUCT DESCRIPTION PART NO.
OM1 OM1RIBBONOR**-C
OM2 OM2RIBBONOR**-C
OM3 OM3RIBBONAQ**-C
OM4 OM4RIBBONAQ**-C
OS1/OS2 OS1/OS2 RIBBONYE**-C

Where ** is the fibre count between 4 & 12

 Fibre Optic Cable Catalogue | Bulk Cables 13

Tight Buffered Cables

Optronics tight buffered and breakout cables are manufactured using 900µm buffered
fibres in a variety of constructions. Aramid or e-glass yarns are utilised to provide strength
and to protect the fibres. The cables can be supplied with either Low Smoke Zero Halogen or
PVC jackets, depending on the application.

Optronics tight buffered and breakout cables have a variety of applications. These include
horizontal distribution, backbone and riser applications, patchcords, rack to rack links in
equipment rooms and short run external inter-building links.

“The Opronics tight buffered cable

ranges provide a complete indoor cabling
solution, offering the connectivity benefits
of buffered optical fibres. If there is an
indoor fibre cable requirement we have
the ideal product with the very latest high
performance optical fibres.”
14 Fibre Optic Cable Catalogue | Bulk Cables

Tight Buffered Distribution Cable (4-24 Fibres)

Optronics tight buffered internal distribution cables are constructed of 900µm buffered
fibres surrounded by e-glass strength members jacketed in an LSZH outer jacket.

Applications
► Internal cable for installation in trunking, under floor or ceiling spaces

► Fibre backbones in riser and horizontal configurations

Features
► Choice of fibre type

► Colour coded fibres

► High strength E-Glass rodent resistant yarn strength members for ease of handling

► LSZH jacket

► Easy to strip

LSZH Jacket

E-Glass Strength Member

Multi Coloured Tight Buffer Fibre

Technical Specifications
4-CORE 8-CORE 12-CORE 24-CORE
DESCRIPTION Fire Retardant Standard Length
LSZH LSZH LSZH LSZH
Outer Diameter mm 4.8 ±0.3 5.8 ±0.3 6.5 ±0.3 7.5 ±0.3
Weight kg/km 26 34 40 61
Max. Load (installation) N 600 750 750 900
Internal Use Standard Length
Max. Load (installed) N 300 375 375 450
Min. Bend Radius (instal-
mm 96 116 130 150
lation)
Min. Bend Radius (installed) mm 48 58 65 75
Fire Performance LSZH LSZH LSZH LSZH
Operating Temp. °C -20~+60 -20~+60 -20~+60 -20~+60
Storage Temp. °C -20~+60 -20~+60 -20~+60 -20~+60
Installation Temp. °C -20~+60 -20~+60 -20~+60 -20~+60
Crush Resistance N/100mm 1000 1000 1000 1000
Pre-terminated cables are
available in a wide range of
lengths.
Ordering Information
PRODUCT DESCRIPTION PART NO.
OM1 OM1TB**UBK-C
OM2 OM2TB**UBK-C
OM3 OM3TB**UBK-C
OM4 OM4TB**UBK-C
OS1/OS2 OS1TB**UBK-C

Where ** is the fibre count between 4 & 24

 Fibre Optic Cable Catalogue | Bulk Cables 15

Tight Buffered Distribution Cable Multi-core (36-96 Fibres)

36 to 96 fibre, stranded sub unit rodent resistant internal distribution cables consisting
of 4 to 8, 12 fibre sub units and fillers when necessary. Each sub unit consists of 12, 900
µm tight buffered optical fibres with e-glass non-metallic strength members and LSZH jacket.
The individually coloured 6mm outside diameter (OD) sub units are helically stranded around
an FRP central strength member with polyester wrapping tape, ripcord and Low Smoke Zero
Halogen (LSZH) final jacket.

Applications
► Internal cable for horizontal distribution or riser applications

Features
► Choice of fibre type

► Colour coded fibres for easy identification

► High strength aramid yarn strength members for ease of handling

► Easy to use

► Lightweight and compact

► LSZH jacket

LSZH Outer Jacket

FRP & Jacket

Multi-core Buffered Cable

Technical Specifications
36-CORE 48-CORE 72-CORE 96-CORE
DESCRIPTION Fire Retardant Standard Length
LSZH LSZH LSZH LSZH
Outer Diameter mm 17.4 ±0.5 17.4 ±0.5 21.6 ±0.5 25.5 ±0.5
Weight kg/km 237 237 397 571
Max. Load (installation) N 2800 2800 4600 5000
Internal Use Standard Length
Max. Load (installed) N 1500 1500 2000 2200
Min. Bend Radius
mm 350 350 440 500
(installation)
Min. Bend Radius
mm 175 175 220 250
(installed)
Fire Performance LSZH LSZH LSZH LSZH
Operating Temp. °C -20~+60 -20~+60 -20~+60 -20~+60
Storage Temp. °C -20~+60 -20~+60 -20~+60 -20~+60
Installation Temp. °C -20~+60 -20~+60 -20~+60 -20~+60
Crush Resistance N/100mm 1500 1500 1500 1500

Ordering Information
PRODUCT DESCRIPTION PART NO.
OM1 OM1TBM**UBK-C
OM2 OM2TBM**UBK-C
OM3 OM3TBM**UBK-C
OM4 OM4TBM**UBK-C
OS1/OS2 OS1/OS2 TBM**UBK-C

Where ** is the fibre count between 36 & 96

16 Fibre Optic Cable Catalogue | Bulk Cables

Breakout Fibre Optic Cable (4-24 Fibres)

Optronics breakout cables are constructed of up to 24, 2mm simplex cables stranded
around a central strength member. Each simplex has its own aramid yarn strength member
and jacket. These sub units are wrapped in a polyester tape and jacketed in LSZH.

Applications
► Internal breakout cable for horizontal distribution

Features
► Choice of fibre type

► Individual high strength aramid yarn strength members for ease of handling

► Easy to use

► Lightweight and compact

► LSZH jacket

LSZH Outer Jacket

FRP CSM & Padding

Simplex Cable

Fire Retardant
Technical Specifications
12 CORE 24 CORE
DESCRIPTION 4 CORE LSZH 6 CORE LSZH 8 CORE LSZH
LSZH LSZH
Outer Diameter mm 7.0 8.2 9.4 11.8 14.1 Internal Use

Weight kg/km 46 63 86 139 159

Max. Load (installation) N 500 1000 1100 1400 2300
Max. Load (installed) N 270 600 700 800 1100
Standard Length
Min. Bend Radius
mm 140 160 190 240 280
(installation)
Min. Bend Radius
mm 70 80 95 120 140
(installed)
Fire Performance LSZH LSZH
Operating Temp. °C -20~+60 -20~+60 -20~+60 -20~+60 -20~+60
Storage Temp. °C -20~+60 -20~+60 -20~+60 -20~+60 -20~+60
Installation Temp. °C -20~+60 -20~+60 -20~+60 -20~+60 -20~+60
Crush Resistance N/100mm 1000 1000 1000 1000 1000

Ordering Information
PRODUCT DESCRIPTION PART NO.
OM1 OM1BO**UOR-C
OM2 OM2BO**UOR-C
OM3 OM3BO**UAQ-C
OM4 OM4BO**UAQ-C
OS1/OS2 OS1/OS2 BO**UYE-C

Where ** is the fibre count between 4 & 24

Other diameters are available upon request.
 Fibre Optic Cable Catalogue | Bulk Cables 17

Loose Tube Cables

Optronics loose tube cables are designed around 250µm fibres in either a single gel filled,
or dry PBT loose tube, or several tubes stranded around a central strength member. The
gel, where present, is to protect the fibres from water ingress. The central strength member can
be either steel or FRP (Fibre Reinforced Plastic). The cables are available up to 144 fibres.

These cables can be supplied with armouring to protect against water ingress, rodents, insects
and physical damage. They can be supplied with either PE (polyethylene) jackets for exterior
applications or Low Smoke Zero Halogen jackets for internal/external use. Dry Loose Tube
cables utilise super absorbent polymer waterblocking technology.

Optronics loose tube cables can be used internally for horizontal distribution or externally for
short or long distance applications. They can be optimised for laying in ducts, direct underground
burial, aerial applications or even underwater deployment.

“A very versatile range of LAN cables for indoor/

outdoor and outdoor use. Pull or, blow it into
ducts, immerse it in water, subject it to rodent
or severe mechanical attack. We have the right
cable for the job.”
18 Fibre Optic Cable Catalogue | Bulk Cables

Single Loose Tube Fibre Optic Cable (4-24 Fibres)

2 to 24 fibre OM1, OM2, OM3, OM4 multimode or OS1/OS2 (ITU-T G.652D singlemode
250µm single loose tube external duct cables with e-glass strength members and
polyethylene (PE) or Low Smoke Zero Halogen (LSZH) jacket.

The single loose tube cables consist of 2 to 24, 250µm optical fibres in a single gel filled loose
tube with e-glass non metallic strength members and black PE or LSZH jacket with ripcord.

Applications
► Suitable for internal / external duct applications
► Suitable for environments where rodent resistance is required
► Ideal for intra building links in campus environments

Features
► Choice of fibre types

► Colour coded fibres

► E-glass strength members for rodent resistance

► Flame retardant LSZH jacket option for enhanced fire

performance
► Compact 250µm loose tube construction
Optical Fibres
Water Repellent Thixotropic Gel
PBT Loose Tube
e-glass Strength Member
PE/LSZH Jacket

Technical Specifications
Fire Retardant

DESCRIPTION 2-12 CORE PE 14-24 CORE LSZH

Outer Diameter mm 6.0 ±0.3 6.7 ±0.3

Weight kg/km 40 47

Max. Load (installation) N 1000 1000 Water Resistant

Max. Load (installed) N 500 500

Min. Bend Radius (installation) Times diameter 20 20
Min. Bend Radius (installed) Times diameter 10 10
Rodent Resistant
Fire Performance LSZH LSZH
Operating Temp. °C -20~+60 -20~+60
Storage Temp. °C -20~+60 -20~+60
Installation Temp. °C -20~+60 -20~+60
Crush Resistance N/100mm 1000 1000 Internal Use

Ordering Information
PRODUCT DESCRIPTION PART NO. External
Use
OM1 PE OM1LT**PBK-C
OM1 LSZH OM1LT**UBK-C
OM2 PE OM2LT**PBK-C
OM2 LSZH OM2LT**UBK-C
OM3 PE OM3LT**PBK-C Standard Length

OM3 LSZH OM3LT**UBK-C

OM4 PE OM4LT**PBK-C
OM4 LSZH OM4LT**UBK-C
OS1/OS2 PE OS1/OS2 LT**PBK-C
OS1/OS2 LSZH OS1/OS2 LT**UBK-C

Where ** is the fibre count between 4 & 24

 Fibre Optic Cable Catalogue | Bulk Cables 19

Multi Loose Tube Fibre Optic Cable (24-144 Fibres)

Up to 144 fibre, 5 to 12 element dry core OM1, OM2, OM3, OM4 multimode or OS1/
OS2 (ITU-T G.652D) singlemode 250µm multi loose tube rodent resistant external duct
cables with e-glass strength members, and high density polyethylene (HDPE) or Low
Smoke Zero Halogen (LSZH) jacket.

The multi loose tube cable construction consists of up to 144, 250µm optical fibres in 12 fibre
gel filled loose tubes with fillers where appropriate, SZ stranded around a fibre reinforced
plastic (FRP) central strength member with waterswellable threads and waterswellable tape.
Helically applied waterblocking e-glass non metallic strength members with ripcord and black
high density polyethylene (HDPE) or Low Smoke Zero Halogen (LSZH) jacket.

Applications
► Suitable for external duct applications
► Suitable for applications where environmental resistance is required

Features
► Choice of fibre types
► Colour coded fibres
► Compact 250µm loose tube construction
► PE jacket for environmental protection and water permeation resistance
► Flame retardant LSZH jacket option for enhanced fire performance

FRP Central Strength Member

Fibre Optic Loose Tube Cable
Water Repellent Thixotropic Gel
Optical Fibre
e-glass Strength Member
Water Blocking Tape
PE or LSZH Jacket
Technical Specifications
Fire Retardant

24 TO
DESCRIPTION 72-CORE 96-CORE 120-CORE 144-CORE
60-CORE
Outer Diameter mm 10.5 ±0.4 11.1 ±0.4 12.6 ±0.4 14.1 ±0.4 15.6 ±0.4
Weight kg/km 90 97 121 148 178
Water Resistant
Max. Load (installation) N 1500 1500 1500 1500 1500
Max. Load (installed) N 600 600 600 600 600
Min. Bend Radius (installation) mm 210 220 250 280 310
Min. Bend Radius (installed) mm 105 110 125 140 155 Rodent Resistant

Operating Temp. °C -40~+70 -40~+70 -40~+70 -40~+70 -40~+70

Storage Temp. °C -20~+60 -20~+60 -20~+60 -20~+60 -20~+60
Installation Temp. °C -20~+60 -20~+60 -20~+60 -20~+60 -20~+60
Crush Resistance N/100mm 2000 2000 2000 2000 2000
Internal Use

Ordering Information
PRODUCT DESCRIPTION PART NO. External
Use
OM1 PE OM1MLT**PBK-C
OM1 LSZH OM1MLT**UBK-C
OM2 PE OM2MLT**PBK-C
OM2 LSZH OM2MLT**UBK-C
OM3 PE OM3MLT**PBK-C Standard Length

OM3 LSZH OM3MLT**UBK-C

OM4 PE OM4MLT**PBK-C
OM4 LSZH OM4MLT**UBK-C
OS1/OS2 PE OS1/OS2 MLT**PBK-C
OS1/OS2 LSZH OS1/OS2 MLT**UBK-C

Where ** is the fibre count between 4 & 24

20 Fibre Optic Cable Catalogue | Bulk Cables

Single Loose Tube STA Fibre Optic Cable (2-24 Fibres)

Optronics single loose tube corrugated steel tape armoured cables are constructed of
250µm fibres held in a gel filled central loose tube surrounded by water-blocking tape
and corrugated, polyethylene laminated steel tape. The cable features two parallel steel
wire strength members embedded in the PE / LSZH outer jacket.

Applications
► Suitable for external applications in ducts, aerial applications or direct burial

Features
► Choice of fibre type

► Colour coded fibres

► High crush resistance

► PE / LSZH jacket

► High tensile strength

PE / LSZH Jacket
Corrugated Steel Tape
Water Barrier
Parallel Steel Wire Strength Member
Optical Fibre
Water Repellent Thixotropic Gel
Central Loose Tube

Technical Specifications Fire Retardant

DESCRIPTION 2-12 CORE 14-24 CORE

Outer Diameter mm 10.0 ±0.3 10.7 ±0.3

Weight kg/km 106 122 Water Resistant

Max. Load (installation) N 1500 1500

Max. Load (installed) N 600 600
Min. Bend Radius (installation) Times diameter 20 20
Rodent Resistant
Min. Bend Radius (installed) Times diameter 10 10
Fire Performance LSZH LSZH
Operating Temp. °C -20~+60 -20~+60
Storage Temp. °C -20~+60 -20~+60
Installation Temp. °C -20~+60 -20~+60 Internal Use

Crush Resistance N/100mm 2000 2000

Ordering Information
External
Use
PRODUCT DESCRIPTION PART NO.
OM1 PE OM1LTSTA**PBK-C
OM1 LSZH OM1LTSTA**UBK-C
OM2 PE OM2LTSTA**PBK-C
OM2 LSZH OM2LTSTA**UBK-C Standard Length

OM3 PE OM3LTSTA**PBK-C
OM3 LSZH OM3LTSTA**UBK-C
OM4 PE OM4LTSTA**PBK-C
OM4 LSZH OM4LTSTA**UBK-C
OS1/OS2 PE OS1/OS2 LTSTA**PBK-C
OS1/OS2 LSZH OS1/OS2 LTSTA**UBK-C

Where ** is the fibre count between 2 & 24

 Fibre Optic Cable Catalogue | Bulk Cables 21

Multi Loose Tube CST Fibre Cable (24-144 Fibres)

The multi loose tube cable construction consists of up to up to 12 elements and
a maximum of 144, 250 µm optical fibres in 12 fibre gel filled loose tubes with fillers
where appropriate, SZ stranded around a jacketed Fibre Reinforced Plastic (FRP) central
strength member with waterswellable threads and waterswellable tape. Helically applied
waterblocking e-glass non metallic strength members with ripcord. Corrugated Steel Tape
(CST) armouring and black High Density Polyethylene (HDPE) or Low Smoke Zero Halogen
(LSZH) jacket.

Applications
► Suitable for external & aerial applications

Features
► Choice of fibre type

► Colour coded fibres

► High water resistant

► High crush resistant

► PE / LSZH jacket

PE / LSZH Outer Jacket

Corrugated Steel Tape
Binder
Loose Tube
FRP Strength Member
Water Locking Yarn & Tape
Water Repellent Thixotropic Gel
Optical Fibre

Technical Specifications Fire Retardant

24 TO
DESCRIPTION 72-CORE 96-CORE 120-CORE 144-CORE
60-CORE
Outer Diameter mm 12.0 ±0.4 12.6 ±0.4 14.1 ±0.4 15.6±0.4 17.1 ±0.4 Water Resistant

Weight kg/km 166 173 207 243 284

Max. Load (installation) N 1500 1500 1500 1500 1500
Max. Load (installed) N 600 600 600 600 600
Rodent Resistant
Min. Bend Radius (installation) mm 240 252 280 320 340
Min. Bend Radius (installed) mm 120 126 140 160 170
Operating Temp. °C -40~+70 -40~+70 -40~+70 -40~+70 -40~+70
Storage Temp. °C -20~+60 -20~+60 -20~+60 -20~+60 -20~+60
Internal Use
Installation Temp. °C -20~+60 -20~+60 -20~+60 -20~+60 -20~+60
Crush Resistance N/100mm 3000 3000 3000 3000 3000

Ordering Information External

Use

PRODUCT DESCRIPTION PART NO.

OM1 PE OM1MLTSTA***PBK-C
OM1 LSZH OM1MLTSTA***UBK-C
48 to 144-Core
OM2 PE OM2MLTSTA***PBK-C Standard Length

OM2 LSZH OM2MLTSTA***UBK-C

OM3 PE OM3MLTSTA***PBK-C
OM3 LSZH OM3MLTSTA***UBK-C
OM4 PE OM4MLTSTA***PBK-C 4 to 36-Core
Standard Length
OM4 LSZH OM4MLTSTA***UBK-C
OS1/OS2 PE OS1/OS2 MLTSTA***PBK-C
OS1/OS2 LSZH OS1/OS2 MLTSTA***UBK-C

Where ** is the fibre count between 24 & 144

22 Fibre Optic Cable Catalogue | Bulk Cables

Dry Single Loose Tube (2-24 Fibres)

The indoor/outdoor single loose tube cables consist of 2 to 24, 250 µm individually

NE
coloured optical fibres in a single waterblocked dry loose tube with helically applied
waterblocking rodent resistant e-glass or aramid non metallic strength members and

W
Low Smoke Zero Halogen (LSZH) jacket.

Applications
► Ideal for internal/external duct applications

► Suitable for one or both end pre termination

Features
► Colour coded fibres

► Compact 250 µm dry loose tube construction

► E-glass yarn for rodent resistance

► LSZH jacket for optimised fire performance

LSZH Jacket

Water Blocking e-glass / Aramid Non Metallic Strength Member

Water Swellable Thread

250µm Optical Fibre

Waterblocked Dry Loose Tube

Technical Specifications Fire Retardant

DESCRIPTION 2 to 24 CORE Aramid 2 to 24 CORE E-glass

Outer Diameter mm 6.4 ±0.3 6.4 ±0.3
Water Resistant
Weight kg/km 48 50
Max. Load (installation) N 1000 1000
Max. Load (installed) N 500 500
Min. Bend Radius Rodent Resistant
mm 130 130
(installation)
Min. Bend Radius (installed) mm 65 65
Fire Performance LSZH LSZH
Operating Temp. °C -20~+60 -20~+70
Internal Use
Storage Temp. °C -20~+60 -20~+70
Installation Temp. °C -20~+60 -20~+70
Crush Resistance N/100mm 2000 2000
External

Ordering Information Use

PRODUCT DESCRIPTION PART NO.

OM1 250m Single dry loose tube RR ULSZH OM1DT**OOR
OM1 250m Single dry loose tube aramid ULSZH OM1DTA**OOR
OM2 250m Single dry loose tube RR ULSZH OM2DT**OOR Standard Length
OM2 250m Single dry loose tube aramid ULSZH OM2DTA**OOR
OM3 250m Single dry loose tube RR ULSZH OM3DT**OAQ
OM3 250m Single dry loose tube aramid ULSZH OM3DTA**OAQ
OM4 250m Single dry loose tube RR ULSZH OM4DT**OAQ
OM4 250m Single dry loose tube aramid ULSZH OM4DTA**OYE OM4DTA**OAQ
Rapid Deployment
OS1/OS2 ITUT G.652D 250 m Single dry loose tube RR ULSZH OS1/OS2 DT**OYE
OS1/OS2 ITUT G.652D 250 m Single dry loose tube aramid ULSZH OS1/OS2 DTA**OYE
G.657A 250m Single dry loose tube RR ULSZH 57ADT**OYE
G.657A 250m Single dry loose tube aramid ULSZH 57ADTA**OYE
Where ** is the fibre count between 2 & 24
Optional black jacket code is UBK
 Fibre Optic Cable Catalogue | Bulk Cables 23

Dry Multi Loose Tube (24-144 Fibres)

The up to 12 element internal/external multi loose tube cable construction consists of

NE
up to 144, 250 µm optical fibres in 12 fibre waterblocked dry loose tubes with fillers
where appropriate. The tubes are SZ stranded around an LSZH jacketed fibre reinforced

W
plastic (FRP) central strength member with waterswellable threads and waterswellable tape.
Helically applied waterblocking E-glass or aramid non-metallic strength members with ripcord
and LSZH jacket.

Applications
► Ideal for internal/external duct applications

► Suitable for one or both end pre-termination

Features
► Colour coded fibres

► Compact 250µm dry loose tube construction

► E-glass yarn for rodent resistance

► LSZH jacket option for optimised fire performance

LSZH Jacket
Water Blocking e-glass / Aramid Non Metallic Strength Members
Water Swellable Tape
Helical Core Binders
Water Swellable Tape
FRP Central Strength Member
Ripcord
12 Fibre Water Blocking Dry Loose Tube
250µm Optical Fibre

Technical Specifications Fire Retardant

DESCRIPTION 24 to 60 CORE 72 CORE 96 CORE 144 CORE

Outer Diameter mm 9.6 ±0.4 10.3 ±0.4 11.5 ±0.4 14.2 ±0.4
Water Resistant
Weight kg/km 96 104 127 190

Max. Load (installation) N 1500 1500 1500 1500

Max. Load (installed) N 600 600 600 600

Min. Bend Radius Rodent Resistant

mm 190 206 230 280
(installation)

Min. Bend Radius (installed) mm 95 103 115 140

Fire Performance LSZH LSZH LSZH LSZH

Operating Temp. °C -40~+70 -40~+70 -40~+70 -40~+70

Internal Use
Storage Temp. °C -20~+60 -20~+60 -20~+60 -20~+60

Installation Temp. °C -20~+60 -20~+60 -20~+60 -20~+60

Crush Resistance N/100mm 2000 2000 2000 2000

External

Ordering Information
Use

PRODUCT DESCRIPTION PART NO.

OM1 E-Glass OM1MDLTE***UOR Standard Length
OM1 Aramid OM1MDLTA***UOR
OM2 E-Glass OM2MDLTE***UOR
OM2 Aramid OM2MDLTA***UOR
OM3 E-Glass OM3MDLTE***UAQ
OM3 Aramid OM3MDLTA***UAQ Rapid Deployment
OM4 E-Glass OM4MDLTE***UAQ
OM4 Aramid OM4MDLTA***UAQ
OS1/OS2 E-Glass OS1/OS2 MDLTE***UYE
OS1/OS2 Aramid OS1/OS2 MDLTA***UYE
Where *** is the fibre count between 24 & 144
24 Fibre Optic Cable Catalogue | Bulk Cables

Dry Core Blowing Cable (12-144 Fibres)

6, 8 & 12 element cable designs, consisting of up to 144, 250µm ITU-T G.652D individually

NE
coloured optical fibres in 12 fibre polymeric gel filled loose tubes, SZ stranded around an
FRP central strength member with waterswellable thread, waterswellable core binders

W
and polyethylene or nylon (polyamide) final jacket with ripcord.

Applications
► For use in external compact ducts by air blowing

Features
► Compact construction offering minimised cable diameter

► Designed specifically for external air blown duct applications

► All dielectric construction with nylon jacket option for reduced installation friction

► FRP central strength member providing high tensile strength and kink resistance

► SZ reverse oscillated stranding for easy installation

► Black polyethylene or PA outer jacket for resistance to the environment

► Waterswellable dry core construction for ease of installation

Polyethylene Jacket
Waterblocking Yarn Binders
Ripcord
12 Fibre Gel Filled Loose Tube
FRP Central Strength Member
250µm Optical Fibre
Waterswellable Thread

Technical Specifications Water Resistant

6 Tube 8 Tube 12 Tube

DESCRIPTION
Elements Elements Elements
Max. fibre count N 12 to 72 96 144
Rodent Resistant
Outer Diameter mm 5.6 6.4 8.2
Weight kg/km 27 40 65
Tensile Rating (long & short term) N 500/250 1200/600 1500/750
Crush Loads (long & short term) N/100mm 800/400 800/400 800/400
External
Use

Standard Length

Ordering Information
PART NO.
OS1/OS2 RDBD***PBK-C Rapid Deployment
OS1/OS2 RDBD***NOR-C
Where *** is the fibre count between 12 & 144
 Fibre Optic Cable Catalogue | Bulk Cables 25

Multi Loose Tube Double Jacket Fibre Cable (24-144 Fibres)

The multi loose tube cable construction consists of up to 12 elements and a maximum of
144, 250µm optical fibres in 12 fibre gel filled loose tubes with fillers where appropriate,
SZ stranded around a fibre reinforced plastic (FRP) central strength member with
waterswellable threads and waterswellable tape. Helically applied waterblocking e-glass
non-metallic strength members with ripcord and PE inner jacket, corrugated steel tape (CST)
armouring and black high density polyethylene (HDPE) final jacket with ripcord.

Applications
► Suitable for external applications in ducts or for direct burial

Features
► Choice of fibre type

► Colour coded fibres

► High water resistance

► Two PE jackets

PE Outer Jacket
Corrugated Steel Tape
PE Inner Jacket
Central Strength Member
Loose Tube
Water Repellent Thixotropic Gel

Technical Specifications Water Resistant

24 to
DESCRIPTION 72-CORE 96-CORE 120-CORE 144-CORE
60-CORE
Outer Diameter mm 14.0 ±0.5 14.6 ±0.5 16.1 ±0.5 17.6 ±0.5 19.1 ±0.5
Rodent Resistant
Weight kg/km 210 219 257 298 343

Max. Load (installation) N 1500 1500 1500 1500 1500

Max. Load (installed) N 600 600 600 600 600

Min. Bend Radius (installation) mm 280 290 320 350 380

Internal Use
Min. Bend Radius (installed) mm 140 145 160 175 190

Operating Temp. °C -40~+70 -40~+70 -40~+70 -40~+70 -40~+70

Storage Temp. °C -20~+60 -20~+60 -20~+60 -20~+60 -20~+60

Installation Temp. °C -20~+60 -20~+60 -20~+60 -20~+60 -20~+60 External

Use
Crush Resistance 4000 4000 4000 4000 4000

Ordering Information
48 to 144-Core
Standard Length
PRODUCT DESCRIPTION PART NO.
OM1 OM1LTDST***PBK-C
OM2 OM2LTDST***PBK-C
OM3 OM3LTDST***PBK-C
4 to 36-Core
OM4 OM4LTDST***PBK-C Standard Length

OS1/OS2 LTDST***PBK-
OS1/OS2
C

Where ** is the fibre count between 24 & 144

26 Fibre Optic Cable Catalogue | Bulk Cables

Military Ruggedised Fibre Optic Cable

Optronics military ruggedised cables are constructed of 1-4 simplex cables, SZ stranded
around steel wire strength member with aluminium polyethylene laminated (APL) tape
as an additional water barrier and a PE outer jacket.

Applications
► Suitable for industrial and military applications in tough environments

Features
► Choice of fibre type

► High tension resistance

► High water resistance

► Easy to use

► PE outer jacket

Optical Fibre
PE Jacket
Fillers/Simplex
Steel Wire Strength Member
Aluminium Polyethylene Laminate
Simplex
Aramid Yarn

Water Resistant

Technical Specifications
DESCRIPTION 2-CORE PE 2-CORE PE 4-CORE PE 4-CORE PE Rodent Resistant

Outer Diameter mm 9.8 11.8 9.8 11.8

Weight kg/km 83 110 83 110
Max. Load
N 1000 1000 1000 1000
(installation)
Internal Use
Max. Load (in-
N 600 600 600 600
stalled)
Min. Bend Radius Times
20 20 20 20
(installation) diameter
Min. Bend Radius Times External
10 10 10 10
(installed) diameter Use

Operating Temp. °C -40~+70 -40~+70 -40~+70 -40~+60

Storage Temp. °C -40~+60 -40~+60 -40~+60 -40~+60
Installation Temp. °C -40~+70 -40~+70 -40~+70 -40~+70
Standard Length

Ordering information available upon request.

 Fibre Optic Cable Catalogue | Bulk Cables 27

Aerial Cable, Direct Burial And Duct Fibre Optic Cable

Optronics offers a range of aerial fibre optic cables including figure of 8 and ADSS
(All Dielectric Self Supporting) cables. These products can be a very cost effective way
to establish an infrastructure network as they avoid the need for expensive ducting to did
trenches.

Optronics figure of 8 aerial cables can be used as a very cost effective aerial solution for
spans usually up to 70 metres.

Optronics ADSS cables can be attached to power lines, hung between poles or between
buildings in campus environments. These cables have no metal parts and their strength
is provided by the use of aramid yarns and FRP (fibre reinforced plastic) central strength
members. Optronics can offer ADSS cables with a span of up to 1200 metres.

The parameters covering aerial cables and their accessories are quite complex, involving
issues such as length of span, temperature range, wind speed tolerance and other factors.
Every project is likely to have differing demands. Further details can be provided on
application. For this reason, the following pages are intended as a guide.

“An extensive range of cables and accessories

that provide a comprehensive telecomms cabling
solution. The aerial and terrestrial cables are
the products of Tafkly’s extensive design
experience, aerial analysis capabilities and optical
fibre expertise.”
28 Fibre Optic Cable Catalogue | Bulk Cables

ADSS MLT Fibre Optic Cable (2-144 Fibres)

Optronics All Dielectric Self-Supporting Multi Loose Tube (MLT) cables are constructed
of fibres inside gel filled central loose tubes, wrapped around an FRP central strength
member. This is encased in a PE inner jacket, aramid yarns and a PE outer jacket.

Applications
► Suitable for installation on poles and on the power distribution network

Features
► Lightweight, all-dielectric construction is ideal for use near electrical power
lines and in areas of frequent lightning strikes

► Round construction is ideal for minimum wind drag and ice build-up

► High tensile strength

► Wide operating temperature range: -40°C - +70°C

PE Outer Jacket
Aramid Yarn
Inner Jacket
Cable Core Jelly
Central Strength Member
Loose Tube
Water Repellent Thixotropic Gel
Fibre

Rodent Resistant External

Water Resistant Use Standard Length Standard Length

Technical Specifications
DESCRIPTION F3 F6 F8 F10 F12 F16 F18 F21 F24 F24 F31
Span m 100 200 300 400 500 600 700 800 900 1000 1200
Outer Diameter mm 11.6 12.0 12.3 12.5 12.8 13.8 14.2 14.5 14.8 15.1 15.5
Weight PE Jacket kg/km 124.2 131.1 136.3 141.4 146.5 165.9 172.6 179.2 185.8 192.3 202.1
Cross Sectional Area mm² 105.68 112.70 117.90 123.07 128.19 150.21 157.40 164.55 171.65 178.70 189.20

Area Of Strength Member mm² 5.67 10.20 13.62 17.02 20.43 26.10 30.64 35.18 39.72 44.26 51.07
RTS kN 8.50 15.30 20.40 25.50 30.60 39.10 45.90 52.70 59.50 66.30 76.50
MOTS kN 3.40 6.12 8.16 10.20 12.24 15.64 18.36 21.08 23.80 26.52 30.60
EDS kN 2.13 3.83 5.10 6.38 7.65 9.78 11.48 13.18 14.88 16.58 19.13
Ultimate Exceptional Stress kN 5.10 9.18 12.24 15.30 18.36 23.46 27.54 31.62 35.70 39.78 45.90
Modulus KN/ mm 8.44 12.52 15.27 17.79 20.11 21.71 24.02 26.13 28.07 29.86 32.31
Thermal Expansion Coefficient 10ˉ6/°C 9.32 5.28 3.78 2.80 2.12 1.42 0.99 0.67 0.41 0.20 -0.05
Operation N/10cm 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
Crush Strength
Installation N/10cm 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200
Safety Factor 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5
Operation mm 174 180 185 188 192 207 213 218 222 227 233
Min. Bend Radius
Installation mm 290 300 308 313 320 345 355 363 370 378 388
Installation °C -10~+60 -10~+60 -10~+60 -10~+60 -10~+60 -10~+60 -10~+60 -10~+60 -10~+60 -10~+60 -10~+60
Temperature Transport °C -40~+70 -40~+70 -40~+70 -40~+70 -40~+70 -40~+70 -40~+70 -40~+70 -40~+70 -40~+70 -40~+70
Operation °C -40~+70 -40~+70 -40~+70 -40~+70 -40~+70 -40~+70 -40~+70 -40~+70 -40~+70 -40~+70 -40~+70
Sag (5mm inc load
PE Jacket % 0.72 0.84 1.06 1.28 1.47 1.57 1.63 1.71 1.78 1.87 2.18
average 20°C)
Ordering information available upon request.
 Fibre Optic Cable
Fibre Optic Cable Catalogue | Bulk Cables
Telecoms 29

Aerial Cable Figure 8 Fibre Optic Cable (2-60 Fibers)

Optronics figure of 8 aerial cable, for spans up to 70m, consists of 250µm optical fibres
in gel filled loose tubes with interstitial gel. Water barrier aluminium tape or steel tape
armouring options are available. Tensile strength is provided by a steel messenger wire. The
cable jacket is black high density polyethylene (HDPE).

Applications
► The figure of 8 cables are suitable for installation in aerial environments for
long haul communication

Features
► Up to 144 fibres with single or multimode options available

► The loose tube stranding technology make the fibres have good secondary excess length
and allow the fibres free movement in the tube, which keeps
the fibre stress free while the cable is subjected to longitudinal stress

► Aluminium moisture barrier tape and corrugated steel tape options

► Stranded wires as self supporting member providing excellent strain performance and
convenient installation

Outer Jacket
Tube Filling Compound
Messenger
Central Strength Member
Loose Tube
Optical Fibre
Interstitial Filling Compound
Fillers Rodent Resistant External
Water Resistant Use

Technical Specifications
DESCRIPTION 2-30 32-36 38-60 2-30 32-36 38-60 2-30 32-36 38-60 2-30 32-36 38-60
Stranded Wire 1x7-3.0 1x7-3.0 1x7-3.0 1.2x7-3.6 1.2x7-3.6 1.2x7-3.6 1.4x7-4.2 1.4x7-4.2 1.4x7-4.2 2.0x7-6.0 2.0x7-6.0 2.0x7-6.0

Cable Diameter mm 10.1 10.8 11.6 10.1 10.8 11.6 10.1 10.8 11.6 10.1 10.8 11.6

Messenger mm 5.2 5.2 5.2 5.8 5.8 5.8 6.4 6.4 6.4 8.2 8.2 8.2
Cable
Diameter

Cable Height mm 18.3 19.0 19.9 18.9 19.6 20.5 19.5 20.2 21.1 21.3 22 22.9

Cable Weight kg/km 127 147 152 130 150 155 132 152 158 140 160 165

Dynamic 10 times cable diameter

Min. Bend
Radius Static 20 times cable diameter

Max. Running
N 4950 4950 4950 7100 7100 7100 9700 9700 9700 19700 19700 19700
Tension

Safe Running
N 2500 2500 2500 3500 3500 3500 4800 4800 4800 9800 9800 9800
Tension

Min. Breaking
N 7990 7990 7990 10710 10710 10710 14580 14580 14580 27720 27720 27720
Tension

Short
2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000
Max Term
Crush Loading
(N/100mm) Long
1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
Term

Ordering information available upon request.

30 Fibre Optic Cable Catalogue | Bulk Cables

Non-Metallic Direct Burial Cable (12 -144 Fibres)

The Optronics 12 elements multi loose tube cable construction consists of up to 144,
250µm optical fibres in 12 fibre gel filled loose tubes with fillers where appropriate,
SZ stranded around a fibre reinforced plastic (FRP) central strength member with
waterswellable threads and waterswellable tape. Helically applied non metallic strength
members with ripcord. corrugated steel tape (CST) armouring and black high density
polyethylene (HDPE) jacket.

Applications
► Suitable for external duct applications

► Suitable for concrete channels

► Can be pulled into duct system

Features
► Multi-layered stranded construction (up to 144 fibres)

► Non-metallic construction

► Particularly light, thin and robust cable

► PE - jacket

► Fibre relevant standards - ITU-T G. 652, G. 655, G. 656 or combination

► Cable relevant standards - IEC 60793 and IEC 60794

► Wrapping is made of water blocking tape

► Dielectric central strength member

PE Outer Jacket
Standard Length Standard Length Telecommunications
Water Blocking Non-Metallic Strength Membrane
Water Swellable Tape
Helical Core Binders
Water Swellable Thread
Jacketed FRP Central Strength Member
Rodent Resistant External
12 Fibre Gel Filled Loose Tube Water Resistant Use
250µm Optical Fibre
Ripcord

Technical Specifications
A-DQ(ZM) A-DQ(ZM)
A-DQ(ZM) A-DQ(ZM) A-DQ(ZM) A-DQ(ZM) A-DQ(ZM) A-DQ(ZM) A-DQ(ZM)
DESCRIPTION (SR)2Y (SR)2Y
(SR)2Y 12 (SR)2Y 24 (SR)2Y 36 (SR)2Y 48 (SR)2Y 60 (SR)2Y 72 (SR)2Y 96
120 144
Maximum Fibre Count Cores 12 24 36 48 60 72 96 120 144

Cable Diameter mm 11.2 11.2 11.2 11.2 11.2 11.2 12.7 14.3 16.0

Cable Weight kg/km 91 91 91 91 91 91 125 155 190

Max. Tensile Load during

N 2700 2700 2700 2700 2700 2700 2700 2700 2700
installation

Fibres per loose tube 12 12 12 12 12 12 12 12 12

Number of loose buffer tube 1 2 3 4 5 6 8 10 12

Number of standing elements 6 6 6 6 6 6 8 10 12

Min. Bend Radius 20x cable outer diameter (during laying and installation) 15x cable outer diameter (installed)

Installation Temperature
°C -5~+50C -5~+50C -5~+50C -5~+50C -5~+50C -5~+50C -5~+50C -5~+50C -5~+50C
Range

Temp. Range Transportation

°C -40~+70C -40~+70C -40~+70C -40~+70C -40~+70C -40~+70C -40~+70C -40~+70C -40~+70C
And Operation
 Fibre Optic Cable Catalogue | Bulk Cables 31

Armoured Direct Burial Cable (12 -144 Fibres)

The Optronics multi element multi loose tube cable construction consists of up to 144,
250µm optical fibres in 12 fibre gel filled loose tubes with fillers where appropriate,
SZ stranded around a fibre reinforced plastic (FRP) central strength member with
waterswellable threads and waterswellable tape. Helically applied non-metallic strength
members with ripcord. Corrugated steel tape (CST) armouring and black high density
polyethylene (HDPE) jacket.

Applications
► Direct burial

► Used in application with high mechanical loads

Features
► Step layer stranded construction (up to 144 fibres)

► Corrugated steel tape as protection against rodents and mechanical damage

► Thin and robust cable

► Dry core construction

► PE- Jacket

► Wrapped in water blocking tape

► Filled loose tube

► Fibre relevant standards ITU-T G.652, G. 655, G. 656 or a combination

► Cable relevant standards IEC 60793 and IEC 60794

PE Outer Jacket
Corrugated CST Standard Length Standard Length Telecommunications

Water Blocking Non-Metallic Strength Members

FRP Central strength member
Water Swellable Thread
Ripcord
Water Swellable Tape Rodent Resistant External
Water Resistant Use
12 Fibre Gel Filled Loose Tube
250µm Optical Fibre
Helical Core Binding

Technical Specifications
A-DQ(ZM) A-DQ(ZM) A-DQ(ZM) A-DQ(ZM) A-DQ(ZM) A-DQ(ZM) A-DQ(ZM) A-DQ(ZM) A-DQ(ZM)
DESCRIPTION
(SR)2Y 12 (SR)2Y 24 (SR)2Y 36 (SR)2Y 48 (SR)2Y 60 (SR)2Y 72 (SR)2Y 96 (SR)2Y 120 (SR)2Y 144
Maximum Fibre
Cores 12 24 36 48 60 72 96 120 144
Count
Cable Diameter mm 12.3 12.3 12.3 12.3 12.3 12.3 13.8 15.4 17.1
Cable Weight kg/km 91 91 91 91 91 91 125 155 190
Max Tensile Load
N 2700 2700 2700 2700 2700 2700 2700 2700 2700
during installation
Fibres per loose
12 12 12 12 12 12 12 12 12
tube
Number of loose
1 2 3 4 5 6 8 10 12
buffer tube
Number of standing
6 6 6 6 6 6 8 10 12
elements
Min. Bend Radius 20 x cable outer diameter (during laying and installation) 17.5 x cable outer diameter (installed)
Installation
°C -5~+50C -5~+50C -5~+50C -5~+50C -5~+50C -5~+50C -5~+50C -5~+50C -5~+50C
Temperature Range
Operation
°C -30~+70C -30~+70C -30~+70C -30~+70C -30~+70C -30~+70C -30~+70C -30~+70C -30~+70C
Temperature Range
Transportation
°C -40~+70C -40~+70C -40~+70C -40~+70C -40~+70C -40~+70C -40~+70C -40~+70C -40~+70C
Temperature Range
Ordering information available upon request.
32 Fibre Optic Cable Catalogue | Bulk Cables

Double Jacket Direct Burial Cable (12 -144 Fibres)

The Optronics multi element multi loose tube cable construction consists of up to 144,
250µm optical fibres in 12 fibre gel filled loose tubes with fillers where appropriate,
SZ stranded around a fibre reinforced plastic (FRP) central strength member with
waterswellable threads and waterswellable tape. Helically applied non metallic strength
members with ripcord and PE inner Jacket, Corrugated steel tape (CST) armouring and black
high density polyethylene (HDPE) final jacket with ripcord

Applications
► Direct burial

► Used in application with particularly high mechanical loads

Features
► Single layer stranded construction (up to 144 fibres)

► Corrugated steel tape as protection against rodents and mechanical damage

► Particularly robust cable, filled loose tube

► Inner and outer jacket are made of PE- Jacket

► Wrapped in water blocking tape

► Core- stranded loose tube, SZ technique

► Tensile strength elements - dielectic central strength member

► Fibre relevant standards ITU-T G.652, G. 655, G. 656 or a combination

► Cable relevant standards IEC 60793 and IEC 60794

PE Outer Jacket
CST Standard Length Standard Length Telecommunications
PE Inner Jacket
Water Swellable Thread
Jacketed FRP Central Strength Member
Water Blocking Non-Metallic Strength Members
Water Swellable Tape Rodent Resistant External
Water Resistant Use
250µm Optical Fibre
Ripcord

Technical Specifications
A-DQ(ZM) A-DQ(ZM) A-DQ(ZM) A-DQ(ZM) A-DQ(ZM) A-DQ(ZM) A-DQ(ZM) A-DQ(ZM) A-DQ(ZM)
DESCRIPTION
(SR)2Y 12 (SR)2Y 24 (SR)2Y 36 (SR)2Y 48 (SR)2Y 60 (SR)2Y 72 (SR)2Y 96 (SR)2Y 120 (SR)2Y 144
Maximum Fibre Count Cores 12 24 36 48 60 72 96 120 144
Cable Diameter mm 14.7 14.7 14.7 14.7 14.7 14.7 16.2 17.8 19.5
Cable Weight kg/km 195 195 195 195 195 195 235 280 325
Max.Tensile Load during
N 2700 2700 2700 2700 2700 2700 2700 2700 2700
installation
Fibres per loose tube 12 12 12 12 12 12 12 12 12
Number of loose buffer tube 1 2 3 4 5 6 8 10 12
Number of stranding elements 6 6 6 6 6 6 8 10 12
Min. Bend Radius 20 x cable outer diameter (during laying and installation) 17.5 x cable outer diameter (installed)
Installation Temperature
°C -5~+50C -5~+50C -5~+50C -5~+50C -5~+50C -5~+50C -5~+50C -5~+50C -5~+50C
Range
Operation
°C -30~+70C -30~+70C -30~+70C -30~+70C -30~+70C -30~+70C -30~+70C -30~+70C -30~+70C
Temperature Range
Transportation
°C -40~+70C -40~+70C -40~+70C -40~+70C -40~+70C -40~+70C -40~+70C -40~+70C -40~+70C
Temperature Range
Ordering information available upon request.
 Fibre Optic Cable Catalogue | Accessories 33

Aerial Cable Accessories

Optronics offers all the accessories required to suspend both OPGW and ADSS cables from electricity power pylons or poles. These include suspension
clamps, tension clamps, joint boxes, vibration dampers, armour rods, cable trays and many other items. This page is intended to provide an overview of the product
range. More details are available on request.

TENSION CLAMP SUSPENSION CLAMP

1. Clevis thimble (optional) 5. Dead-end component 1. Clevis thimble (optional) 5. Outer rods
2. Extension link (optional) 6. Structural reinforcing rods 2. Double eye twisted (optional) 6. Structural reinforcing rods
3. Thimble eye 7. Bonding clamp 3. Cast aluminium clamp 7. Grooved earthing clamps
4. ID tag 8. Grounding wire (optional) 4. Elastomer insert clamp 8. Grounding wire (optional)

DOUBLE PREFORMED SUSPENSION CLAMP VIBRATION DAMPER

1. Clevis thimble (optional) 6. Outer Rods 1. Cast aluminium clamp (AA)

2. Suspension link - double 7. Structural reinforcing rods 2. Galvanized steel wire
pivots 8. Grooved earthing clamps 3. Hammer: cast iron, hot galvanized steel
3. Suspension link - model PS 9. Grounding wire
4. Cast aluminium insert
5. Rubber insert

VIBRATION DAMPER FOR ADSS ANTI ELECTRICAL STRESS COIL

1. Cast aluminium clamp 1. Gripping section

2. Galvanized steel wire 2. Coil section
3. Hammer
34 Fibre Optic Cable Catalogue | Fibre in a Box

Fibre in a Box
Fibre in a box is the new way to use fibre optic cable. Supplied as lenghs of 305m Reelex®

NE
box (just like copper data cables) this revolutionary product enables storage of 7320 metres
in just one pallet space, reducing warehousing costs. Fibre in a box enables easy “off the

W
shelf” sales with no cable cutting. Installers can easily carry one box of each of their favourite,
frequently used cables in their vans. With no cable reels it is easy and convenient to use on
site.

Fibre in a box is currently available in 4, 6, 8 and 12 core tight buffered fibre optic cable
OM1, OM2, OM3, OM4 and OS1/OS2 fibre construction types are available.
Please call our friendly sales team for loose tube fibre optic cable availability.

Features
► 305m boxes

► Reelex® packaging

► No cable cutting

► 24 boxes per pallet

► Small Cat. 5 type box

► Available in 4/8/12 core with multimode, singlemode and bend insensitive fibres

Benefits
► Convenient “off the shelf” sales
► Easy Fire Retardant Internal Use

► Smooth pull out on site

► Simple
► Possible to easily pull several cables at once
► Portable
► Saves time and cost; no reeling equipment required

► 7320 metres in one pallet space; saves warehousing space and cost

► Easily stored in installer’s van

► Eliminates scrap

Fibre in a Box Part Number Generator

Please select a code from each coloured section displayed below, to create your specific Fibre in a box. Place all of the codes together in order to generate
your part number.

TB 305 LSZH

Mode Fibre Count Cable Type Lenght Jacket Type

OS1 / OS2 4

OM1 8

OM2 12

OM3

OM4
 Fibre Optic Cable Catalogue | Fibre Tools 35

Cable Preparation Tools

To complement the Optronics range of fibre optic and copper cables, Takfly is pleased
to offer a comprehensive and practical range of tools for cutting, stripping, crimping,
cleaving and terminating fibre optic and copper cables.

On the following pages you will find a selection of equipment designed to assist an installer in
pulling cable into position, even in the most awkward locations and in cutting, cleaving, stripping
and terminating fibre optic and copper cables in the most efficient and time saving way.

A small investment in the quality equipment on the following pages will be very quickly repaid
in terms of time saved.

“Our Optronics range of copper and fibre installation

tools and test equipment offers the networking
installer an unrivalled choice. We also recommend
you look no further for fibre cleaning and polishing
requirements as Optronics has the answer.”
36 Fibre Optic Cable Catalogue | Fibre Tools

Optronics Fibre Tools

Easy Handle Stripper
The stripper has 3 stripping guides which are used to remove the 2 to 3mm jacket from patchcord
cable, 900µm buffer insulation and 250µm acrylic coating. This leaves the 125µm bare fibre exposed
for termination. The stripping holes are angular as opposed to rounded, this gives the blades better grip
onto the fibre which results in a quality strip.

Description Part Number

Easy handle stripper OPT-FOS

Carbide Pen Cleaver

Optronics has two styles of cleavers in it’s range, The OPT-CPC is a pen style scribe which has a 30
degree wedge tip made from carbide, the material and angle ensures a precision cleave. The pen cap
is great for keeping the tip protected when stored.

Description Part Number

Carbide pen cleaver OPT-CPC

Jacket Stripper
Ideal for removing the outer jacket from multi-core fibre optic cables between 4.5 and 25mm in
diameter. The stripper removes the jacket by slitting the sheath around the cables circumference and
then horizontally to the desired length, the jacket is then peeled away from the cable. You can also
gain access to fibres at mid length, this is achieved by making two cuts around the circumference at the
desired position then by cutting horizontally between the two.

Description Part Number

Jacket stripper OPT-CS

Kevlar TM Shears
Specialist scissors are required to cut the Kevlar from multi-core and patchcord cables.
These scissors are specifically designed with robust hardened steel and very sharp serrated blades
to make the removal of Kevlar very easy. They have a chrome plated finish and ergonomic handles.
Due to the sharpness and robust design of the blades they can also be used on a multitude of other
materials.

Description Part Number

High quality Kevlar shears. OPT-KS

Ratchet Style Crimping Tool

The OPT-FOCT is a very rugged crimping tool. It is has a universal die which allows you to crimp any
standard fibre optic connector including ST, SC, FC, LC and MTRJ.
The comfort grip handles makes regular use easy on the user’s hand. The design incorporates a
ratchet mechanism which ensures there is a consistent and quality crimp every time irrespective of
the user.

Description Part Number

Ratchet style crimping tool OPT-FOCT
 Fibre Optic Cable Catalogue | Fibre Tools 37

Optronics Fibre Tools

Universal Strippers
The stripper has an adjustable blade which allows the stripping of cable from 3.2 to 9mm in diameter. It
can strip outer jackets of small core fibre cable, multi-conductor cable, plus flat or irregular cable. The
blade can be used to cut data cable and strip duplex fibre cable.

Description Part Number

Data cable stripper OPT-UTPS

Cyclops Stripper
The cyclops cable stripper can be used to strip the jacket from most cable types up to 11mm in diameter,
these include UTP / STP data cable, fibre optic and audio cable. It is completely automatic and requires
no blade adjustments

Description Part Number

Cyclops stripper CYCLOPSSTRIPPER

Cable Cutters
A simple yet necessary tool if you wish to cut cables to your own lengths. These cutters can be used on
cables up to 10.5mm in diameter be it fibre optic or copper UTP/STP.
The Jaws are curved to enhance the cutting action and prevent cables being crushed under the cutting
pressure. Soft grip PVC handles makes this tool comfortable to use over long periods. A locking mechanism
guarantees the jaws are kept closed when not in use to keep the blades from being damaged.

Description Part Number

0.14” Cable cutter OPT+CC

Universal Splice Tray

The Optronics universal splice tray is the perfect fibre management solution; each tray fits easily into any
fibre enclosure such as a patch panel or lockable wall boxes and can be stacked to accommodate higher
fibre counts. Each tray is 80mm x 155mm x 7mm (WxLxD) supplied with a lid for added protection to the
internal managed fibre. Each tray requires splice holders which are sold separately.

Description Part Number

Universal splice tray SPLICETRAY
Splice tray lid SPLICETRAYLID

Fibre Management Kits

Fibre management kits are a versatile accessory for patch panels and wall boxes. They provide all the
necessary items to professionally organise and manage the internal excess fibre. Each kit includes a cable
gland, splice bridge, bunny clips and warning label.

Description Part Number

Fibre management kit CABLEMANAGEMENT
38 Fibre Optic Cable Catalogue | Fibre Tools

Optronics Fibre Tools

Polishing Machine
The Optronics PC20 polishing machine has been designed specifically to meet the needs of small
termination houses. It is a low cost and easy-to-use manufacturing solution that supports quick
turnaround manufacturing.
Optronics provide a complete technical support service and can supply detailed instructions from cable
preparation to final test. These processes have been tried, tested and honed for over a decade and are
the same as used in our facilities.

Description Part Number ST

Polishing Machine, UK Power Cord PC20POLISHER-UK
Polishing Machine, EU Power Cord PC20POLISHER-EU
ST/PC Polish Jig, 12 Position Polishing Plate STPC12JIG FC
LC/PC Polish Jig, 12 Position Polishing Plate LCPC12JIG
LC/APC Polish Jig, 12 Position Polishing Plate LCAPC12JIG
FC/PC Polish Jig, 12 Position Polishing Plate FCPC12JIG
FC/APC Polish Jig, 12 Position Polishing Plate FCAPC12JIG
SC
SC/PC Polish Jig, 12 Position Polishing Plate SCPC12JIG
SC/APC Polish Jig, 8 Position Polishing Plate SCAPC8JIG
Rubber Pad, Durometer Reading 60 4”/10mm DUR060PAD110MM LC
Rubber Pad, Durometer Reading 70 4”/10mm DUR070PAD110MM
Rubber Pad, Durometer Reading 80 4”/10mm DUR080PAD110MM

Polishing Discs
Optronics offers a superior range of diamond polishing disc. They are ideally suited for polishing
machines but can also be used for hand polishing applications. Available in packs of 25 as standard
and measure 127mm (5”) in diameter, in the following grades, 9µm, 5µm, 3µm, and 1µm.

Description Part Number

1 µm Diamond Lapping Film 127mm Disk Pk25 OPT1UMDISC127
3 µm Diamond Lapping Film 127mm Disk Pk25 OPT3UMDISC127
5 µm Diamond Lapping Film 127mm Disk Pk25 OPT5UMDISC127
9 µm Diamond Lapping Film 127mm Disk Pk25 OPT9UMDISC127
0.5 µm Diamond Lapping Film 127mm Disk Pk25 OPT0.5MDISC127
Finishing Diamond Lapping Film 127mm Disk Pk25 FIDISC127

Heat Cure Fibre Termination

The OPT-FHS series hand-held fibre inspection microscopes are an ideal choice for checking field
terminations for fibre end face quality.
A combination of durable construction, comfortable design, easy operation and quality optics ensures
that this tool will enhance the performance of installation and maintenance staff.
The OPT-FHS scopes are designed with a professional grade coaxial illumination system. This
maximizes the detail seen by the user, because the light travels along the same axis as the end face
making even fine scratches and contaminates easily visible.
The OPT-FHS series is equipped with a laser attenuation filter for your safety. Laser attenuation filters Image viewed through coaxial illumination
provide excellent eye protection. However, they are not a substitute for practising good laser safety. left slide shows contaminant detail
right slide shows clean connector
Never attach or view a live fibre with any optical fibre microscope.

Description Part Number

200 x Coaxial Illumination Hand Held Fibre Scope OPT-FHS-200X
400 x Coaxial Illumination Hand Held Fibre Scope OPT-FHS-400X
 Fibre Optic Cable Catalogue | Cleaning Products 39

Optronics Fibre Optic Cleaning Products

Lint Free Tissues
Lint free tissues are a versatile consumable for many applications. They are mainly used to clean bare
fibre as part of the termination or splicing process.
The lint free characteristic allows them to be used for a multitude of other purposes such as cleaning
optical equipment and preparing work surfaces.

Description Part Number

100 Lint free tissues CLEANTISSUE/100
400 Lint free tissues CLEANTISSUE/400

IPA Wipes
The Optronics pre-saturated wipes contain 99% pure IPA or isopropyl alcohol. The wipe material is made
from a high quality, non-abrasive, lint free fabric.
They can efficiently remove dust, grease, oil, flux, soils and other contaminants and residues from
substrates prior to bonding such as bare optical fibre during a termination or splicing process.

Description Part Number

50pcs IPA saturated wipes CLEANWIPES
Single IPA saturated wipes CLEANWIPES/S

Foam Buds
Foam buds are the ideal consumable for cleaning bulkheads after installation. They are used to clean the
end faces of connectors that are installed from inside the enclosure, the snug fit of the foam head will also
remove any contaminants found inside the adapter.

Description Part Number

2.5mm foam buds CLEANBUDS

Micro Fibre Sticks

Micro fibre sticks are the ideal consumable for cleaning 1.25mm bulkheads after installation. They can
be used to clean the end faces of connectors that are installed from inside the enclosure. Cleaning is
achieved by inserting the micro fibre tip inside the adapter’s aperture and twisting once.
The micro fibre material allows the user to clean installed connector end faces without scratching the
surface and ensures a perfect clean first time.

Description Part Number

100 1.25mm micro fibre sticks CLEANSTICKS
40 Fibre Optic Cable Catalogue | Fibre Kits

Cleaning and Termination Kits

Cleaning Kit
The Optronics fibre optic cleaning kits combine all the best and most widely used products into one
simple to use package. They contain all the necessary products to competently and professionally
clean fibre optic installations. With 3 levels of kits available it’s easier to choose which kit is right for
the user application.

Description Part Number

Level one cleaning kit CLEANKIT-L1
Level two cleaning kit CLEANKIT-L2
Level three cleaning kit CLEANKIT-L3

Cold Cure Fibre Termination

The Optronics cold cure fibre termination and inspection kit is an essential piece of kit for engineers
who wish to terminate fibre using the cold cure method. This kit is suited for any engineer who is
experienced at terminating fibre.
The kit contains the superior Optronics range of tools including the Optronics inspection scope. All
items are packed into their own cut foam compartment to keep them from damage. The kit is presented
in a virtually indestructible yet stylish case which is ideal for such fragile equipment.

Description Part Number

Cold cure fibre fermination kit OPT- COLDKIT

Heat Cure Fibre Termination

The Optronics heat cold cure fibre termination and inspection kit is an essential piece of kit for engineers
who wish to terminate fibre using the cold cure method. This kit is suited for any engineer who is
experienced at terminating fibre.
The kit contains the superior Optronics range of tools including the Optronics inspection scope. All
items are packed into their own cut foam compartment to keep them from damage. The kit is presented
in a virtually indestructible yet stylish case which is ideal for such fragile equipment.

Description Part Number

Heat cure fibre termination kit OPT- HEATKIT

Splice Protectors
Splice protectors are used after a fusion splice has been performed. The protectors are slipped over the
joint and heated using the oven located on the splicer.
The polyethylene then shrinks to form a tight hold over the joint which is supported by a steel pin giving
extra added strength and protection to the splice joint.

Description Part Number

60mm splice protectors SPLICE60CLEAR
45mm splice protectors SPLICE45CLEAR

Fusion Splicer
The Optronics OPT-FSPL fusion splicer uses a core-to-core profile alignment system to provide the
best possible termination of optical fibres.
The splicer is small and lightweight and is supplied complete in its own hard carry case making it ideal
for use in the field.
The standard OPT-FSPL-KIT comprises the fusion splicer, cleave tool, battery and charger, AC power
supply, spare electrodes, cooling tray buffer stripper and hard carry case with strap.

Description Part Number

Fusion splicer, AC adaptor and power cord, battery, charger, spare electrodes,
OPT-FSPL-KIT
cooling tray, precision cleave tool, buffer stripper, carry case
 Fibre Optic Cable Catalogue | Test and Measurement 41

Test and Measurement

OPTMSKIT
The OPTMS test kit combines the OPTPM AUTO optical power meter, OPTLS QUAD integrated LED and
LASER light source and is ideally suited for testing fibre optic networks with singlemode and multimode
cables.

Description Part Number

Quad Optical Light Source Kit OPTMSKIT

ST Multimode Kit
The OPTM test kit is an inexpensive solution for testing multimode systems. The kit combines the OPTPM
optical power meter and the OPTL S dual optical light source which operates at 850 and 1300nm. Its a
great kit for beginners or network owners and can be used for testing premises networks, LAN and gigabit
ethernet. Includes optical light source, optical power meter. Protective rubber boots, adaptor cap, 50 and
62.5µm mandrels, users guide and carrying case.

Description Part Number

ST Test Kit OPTMKIT

Visual Fault Locator

The OPTVFL is a compact but powerful visual fault locator designed to trouble-shoot faults on fibre optic
cables. Light generated by this unit will escape from sharp bends and breaks in jacketed or bare fibres, as
well as poorly mated connectors. It can also identify faults in fibre optic jumper cables, distribution frames,
patch panels, and splice trays.

Description Part Number

Visual Fault Identifier OPTVFL

Optronics OTDR
A user friendly multimode and singlemode OTDR specifically designed for testing and trouble-shooting
enterprise, campus and access networks. It’s robust construction and long battery life make it ideal for
use in the field. A single button push starts a test, making it simple to use for beginner or expert. The
result is then shown as a trace or table of events in full colour, making the location of faults of fibre cable
uncomplicated. By transferring the result to a USB memory stick or directly to a PC via the USB port,
easy management of the results can be achieved using the free software provided. Improved fibre testing
capability can be achieved by adding the optional power meter, visual fault locator and connector end face
inspection probe making the Optronics OTDR a truly versatile fibre optic instrument.

Description Part Number

Optronics Test Multimode/ Singlemode Quad OTDR OPT-OTDR