QuickSpecs HPE M-series SN2410M Switch

Overview

HPE M-series SN2410M Switch

With an increasing need to access data faster and accommodate growing workloads, rising levels of east-west traffic, and new
storage arrays based on flash storage technologies, a high bandwidth, low-latency, zero packet loss network becomes paramount.
The HPE SN2410M switches offer a 100GbE-based network platform capable of delivering unbelievable networking speed and
agility to keep pace with the most intense workloads small- to large-scale enterprises can produce. With port speeds spanning from
1Gb/s to 100 Gb/s and a switching capacity of 4Tb/s. All this enables the M-Series to deliver a landmark 2.97Bpps processing
capacity and an uncompromising 300ns cut-through latency in a compact 1RU form factor. The M-series are perfect for Top-Of-
Rack (TOR) deployments and optimized for virtualized environments, hyperconverged infrastructure, and storage deployments.

With HPE M-Series Ethernet switches provides the right network bandwidth with consistent performance for high-performance
and storage workloads. Delivering the highest feature set at the right price allows you to get the most out of your Ethernet
infrastructure to best support a variety of use cases, including media and entertainment; streaming video, financial services
industry, virtualized data centers, and next generation storage, including software-defined storage and NVMe flash.

With HPE M-series switches, you can:

• Optimize Storage— modernize your network to eliminate limitations and bottlenecks that can be caused by the addition
of flash storage.
• Enjoy efficient network performance— avoid packet loss, provide predictable performance with line-rate packet
delivery across all ports and all packet sizes
• Realize breakthrough economics— make better use of your data center resources with the highest port density per
rack unit and the industry’s lowest power consumption.
• Accelerate business innovation— utilize 1/10/40Gbps Ethernet connectivity for existing workloads and enhance
connectivity utilizing built-in 25/50/100Gbps capabilities to respond quickly to business needs and to stay on the
leading edge of Ethernet switching technology.

The HPE M-Series SN2410M Ethernet switch is a top-of-rack data center switch offering two form factor configurations: a 1U 48-
port 1/10/25GbE SFP28 with 8-port 100GbE QSFP28. Each switch offers cost-effective options with entry at 24-ports and a pay
as you grow with a software license. With unique break-out cables that can fan out individual QSFP28 switch ports to multiple
device ports to increase density; Odd numbered QSFP28 ports breakout into four 10 or 25GbE ports. An odd numbered QSFP28
port configured in x4 breakout un-maps the use of adjacent even numbered QSFP28 port.

SN2410M is available in following models

• HPE SN2410M 25GbE 48SFP28 8QSFP28 Switch
• HPE SN2410M 25GbE 24SFP28 4QSFP28 Switch
• HPE SN2410M 25GbE 24-port Upgrade E-LTU
• HPE SN2410bM 10GbE 24-port Upgrade E-LTU

SN2410M half ports activated models offer cost-effective options for entry and capability for doubling active ports with a license,
so you can pay for ports as growth requires.

Page 1
QuickSpecs HPE M-series SN2410M Switch

Overview

HPE M-Series SN2410M Front View

1. Syatem Status LEDs 3. SFP+/SFP28 Ports (1-48)
2. QSFP+/QSFP28 Ports (1-8)

M-Series SN2410M Rear View

1. Fans (4 Units) 6. Power Supply
2. Fans Status LEDs 7. Serial Console Port (115200 BAUD rate)
3. MGMT0 100Mb/s to 1Gb/s Port 8. USB Port
4. MGMT1 100Mb/s to 1Gb/s Port 9. System Health LED
5. Power Supply 10. Resset button

Page 2
QuickSpecs HPE M-series SN2410M Switch

Overview

Models
Description SKU
HPE M-Series SN2410M Ethernet Switch Models
HPE SN2410M 25GbE 48SFP28 8QSFP28 Power to Connector Airflow Switch Q2F22A
HPE SN2410M 25GbE 24SFP28 4QSFP28 Power to Connector Airflow Switch Q6M27A
HPE SN2410M 25GbE 24-port Upgrade E-LTU S0N97AAE
HPE SN2410bM 10GbE 24-port Upgrade E-LTU S0N98AAE
Notes:
− A fixed Rack Mount kit is included in the box with each switch model.
− HPE ONIE switch SKUs are intended for customer installation of NVIDIA® Cumulus® or another NOS and
cannot be converted to ONYX switch SKUs under any circumstances. HPE switch SKUs with factory
installed ONYX cannot be converted to HPE ONIE switch SKUS and do not support NVIDIA® Cumulus® or
any other NOS.

Page 3
QuickSpecs HPE M-series SN2410M Switch

Standard Features

Key Features and Benefits

• HPE M-Series SN2410M offers cost-effective options with entry at 24-ports and a pay as you grow with a software
license. It offers more flexibility to add capacity when needed for diverse deployment and tighter budgets.
• SN2410M switches are ideal for modern server and storage networks, supporting a 1U 48-port 1/10/25GbE SFP28 with
8-port 100GbE QSFP28 delivering predictable performance and zero packet loss at line-rate across each port and packet
size.
• SN2410M with unique break-out cables that can fan out individual QSFP28 switch ports to multiple device ports to
increase density. QSFP28 ports breakout into four 10 or 25GbE ports.
• Optimized port configuration enables high-speed rack connectivity to the server at 10GbE or 25GbE speeds with
100GbE uplink ports that allow for a variety of blocking ratios that suit specific application requirements.
• SN2410M provides ultra-low latency of under 300ns port-to-port. This is advantageous for flash storage which moved
the latency bottleneck from storage media to the network, as well as for the bursty nature of today’s software-defined
and cloud-driven data center traffic.
• Provides wire-rate performance with zero packet loss across all frame sizes, avoiding any negative impact on applications
that could occur with frame loss as unexpected packet loss is unacceptable in modern data centers, especially within a
storage network.
• Capable of forwarding 100% capacity wire rate performance with zero packet loss across all ports while transferring data
across both Layer 2 and Layer 3 networks.
• Designed to use less electric power than competing switches, with less than 6 watts per port, providing one of the
industry’s lowest power draws, producing less heat than competing products, and allowing reduced OpEx cost.
• Provides enough internal bandwidth to carry all ports at line-rate concurrently. This allows the switches to avoid head-of-
line blocking which can reduce a switches overall performance and throughput.

M-Series SN2410M
• SN2410M supports two configurations:
− 1U 48-port 10/25GbE SFP28 with 8-port 100GbE QSFP28
− 1U 48-port 10GbE SFP+ with 8-port 100GbE QSFP28
• Offers cost-effective options with entry at 24-ports and a pay as you grow with a software license.
• Extremely Flexible. QSFP28 ports breakout into four 10 or 25GbE ports.
• Ultra-low latency with true cut through performance, Zero packet loss performance with DCBX, PFC, and ECN support

User Interfaces: Command Line & Web Interface

• Industry-standard command line interface (CLI). The CLI is accessed through SSH or Telnet sessions, or directly via the
console serial port on the power side panel.
• The CLI can be in one of several modes, and each mode makes available a certain group (or level) of commands for
execution.
• Web interface - WebUI that accepts inputs and provides outputs by generating webpages which can be viewed by the
user using a web browser for configuration, monitoring, and troubleshooting.
• The inventory in the switch system can be accessed through a SNMP MIB browser. These devices are indexed
(entPhysicalIndex) using three levels: Module layer, Device layer & Sensor layer

Page 4
QuickSpecs HPE M-series SN2410M Switch

Standard Features

System Management
Management Interface
Management interfaces are used in order to provide access to switch management user interfaces (e.g. CLI, WebUI). HPE Switch
Management supports out-of-band (OOB) dedicated interfaces (e.g. mgmt0, mgmt1) and in-band dedicated interfaces. In addition,
HPE M-Series Switches feature a standard 115200 baud rate RJ45 serial port that provides access to the CLI.

NTP, Clock & Time Zones

Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-
switched, variable-latency data networks. NTP is intended to synchronize all participating computers to within a few milliseconds of
Coordinated Universal Time (UTC) and is designed to mitigate the effects of variable network latency.

PTP
IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems (standard number
1588) defines the means to achieve time synchronization in the orders of sub microseconds.

Software Management
Configuration Management
Onyx’s built-in automation infrastructure reduces operational expenses and time to service by minimizing manual operations and
eliminating configuration and provisioning errors. Automation tools such as Ansible, SaltStack, ZTP and Puppet enable you to
automate fabric configuration and large scale deployments.

Saving, Loading & restore to factory defaults of the Configuration Files

There are two types of configuration files that can be applied on the switch, BIN files (binary) and text-based configuration files.
BIN configuration files are not human readable. Additionally, these files are encrypted and contain integrity verification preventing
them from being edited and used. Text configuration files are text-based and editable. It is similar in form to the output of the
command “show running config expanded”. Automated configuration file backup feature can be used to upload the active
configuration file on every “configuration write". The switch WEBUI and CLI can be used to load a BIN or text configuration file. By
default, or after a system reset, the system loads the default “initial” configuration file. Support is provided to load a different
configuration file and make it the active configuration.

Logging
Logging of system events in several severity level over a configurable period of time.

Debugging
Support save sysdmp file collects configuration, status, counters, log files, What-Just-Happened, and WireShark traces for Ethernet
modules to enable timely review of problems and facilitate service support. There are 31 per port packet counters and an
additional 22 discard packet classification counters to help you identify why there are packet processing problems, should they
occur.

Page 5
QuickSpecs HPE M-series SN2410M Switch

Standard Features

What Just Happened (WJH)

As an innovative network telemetry technology, ‘What Just Happened’ (WJH) monitors and alerts on data plane anomalies to
reduce system downtime. With built-in capabilities to inspect packets across all ports at line-rate, multi-terabit speeds, WJH avoids
time-consuming data collection and manual searches for network problems. In addition, a streaming WJH telemetry application,
supported by other management applications, can be installed as a Docker container.

Link Diagnostic Per Port

Enables an insight into the physical layer components - see information such as a cable status (plugged/unplugged), speed
mismatch, auto-negotiation failures, signal quality failures, link training failures, forward error code mismatch, etc.

Signal Degradation Monitoring

A system can monitor the bit error rate (BER) in order to ensure a quality of the link and take an automatic action to disable
offending ports.

Telemetry
Sampling (histograms) – a network administrator can enable a sampling of the port buffer occupancy, record occupancy changes
over time, and provide information for different levels of buffer occupancy, and amount of time the buffer has been occupied
during the observation period.
Thresholds – thresholds may be enabled per port to record the network time when port buffer occupancy crosses the defined
threshold and when buffer occupancy drops below it.

User Management and Security

• Different user account types with different privileges
• RADIUS, TACACS+ & LDAP support
• System Secure Mode - configures the switch system to run secure algorithms in compliance with FIPS 140-2
requirements
• USA Department of Defense certification – UC APL
• Storm Control
• Access Control Lists (ACLs L2-L4 & user defined)
• 802.1X - Port Based Network Access Control
• SSH server strict mode – NIST 800-181A
• CoPP (IP filter)
• Port isolation

Cryptographic (X.509, IPSec) and Encryption

• Configuring, generating and modifying x.509 certificates used in the system.

802.1x Protocol
Authenticate hosts (or supplicants) and to allow connection only to a list of allowed hosts pre-configured on an authentication
server

Network Management Interfaces SNMP, JSON & XML

Puppet Agent
Built-in agent for the open-source “Puppet” configuration change management system

Page 6
QuickSpecs HPE M-series SN2410M Switch

Standard Features

Additional Management & Automation Features

• Zero Touch Provisioning
• Ansible, SALT Stack
• FTP \ TFTP \ SCP
• AAA , RADIUS \ TACACS+ \ LDAP
• JSON & CLI , Enhanced Web UI
• SNMP v1,2,3
• In-band Management
• DHCP, SSHv2, Telnet
• SYSLOG
• Dual ONYX™ Software images
• Events history

Linux Docker Containers

Run your applications as a Linux docker image embedded in the switch flash:
• Full SDK access through the container
• Persistent container & shared storage.

Software Components, Standard, Base Models

Ethernet Switching
Interface Isolation
Group interfaces in sets where traffic from each port is isolated from other interfaces in the group.

Link Aggregation Group (LAG)

Several same speed links are combined into a single logical entity with the accumulated bandwidth of the originating ports

MLAG
Extending the implementation of the LAG to more than a single device provides yet another level of redundancy that extends
from the link level to the node level.

VLANs
L2 segment of the network which defines a broadcast domain and is identified by a tag added to all Ethernet frames running
within the domain

Voice VLAN
Provide QoS to voice and data traffic in a scenario where a terminal is connected to an IP phone which is in turn connected to the
port on the switch

QinQ
Segregate the traffic of different customers in their infrastructure, while still giving the customer a full range of VLANs for their
internal use by adding a second 802.1Q VLAN tag to an already tagged frame

Spanning Tree
Rapid Spanning Tree Protocol (RSTP) provides for rapid recovery of connectivity following the failure of a bridge/bridge port or a
LAN. The following are supported: BPDU Filter, BPDU Guard, Loop Guard, Root Guard, MSTP and RPVST

Page 7
QuickSpecs HPE M-series SN2410M Switch

Standard Features

Virtual routing and forwarding functions (VRFs)

Virtual routing and forwarding (VRF) is a technology included in IP (Internet Protocol) network routers that allows multiple
instances of a routing table to exist in a router and work simultaneously. This increases functionality by allowing network paths to
be segmented without using multiple devices. Because traffic is automatically segregated, VRF also increases network security..
Currently, Onyx™ supports 64 VRF instances.

OpenFlow - Support for OpenFlow 1.3

OpenFlow is a network protocol that facilitates direct communication between network systems via Ethernet. Software Defined
Networks (SDN) allows a centralist management of network equipment. OpenFlow allows the SDN controller to manage SDN
equipment. The OpenFlow protocol allows communication between the OpenFlow controller and OpenFlow agent.

VXLAN
VXLAN (Virtual eXtensible Local Area Network) addresses the requirements of the L2 and L3 data center network infrastructure
in the presence of virtual networks in a multi-tenant environment. It runs over the existing networking infrastructure and provides
a means to “stretch” a L2 broadcast domain over a layer 3 network.
IGMP Snooping
Snooping and updating tables based on the IGMP protocol used by hosts and adjacent routers on IP networks to establish
multicast group memberships

Link Layer Discovery Protocol (LLDP)

A vendor-neutral Link Layer protocol in the Internet Protocol Suite used by network devices for advertising their identity,
capabilities, and neighbors on a IEEE 802 LAN

Quality of Service (QoS)

QoS Classification, QoS ReWrite, Queuing and Scheduling, RED & ECN are supported
Access Control List
An Access Control List (ACL) is a list of permissions attached to an object, to filter or match switches packets. When the pattern is
matched at the hardware lookup engine, a specified action (e.g. permit/deny) is applied
Other QOS features
• 802.3X Flow Control
• WRED, Fast ECN & PFC
• 802.1Qbb Priority Flow Control
• 802.1Qaz Enhanced Transmission Selection
• DCBX and Application TLV support
• Advanced QoS- qualification, Rewrite, Policers
• 802.1AB Station and Media Access Control Connectivity Discovery
• Advanced and user-mode Shared buffer management

Port Mirroring
Port mirroring enables data plane monitoring functionality which allows the user to send an entire traffic stream for testing.

sFlow
sFlow (ver. 5) is a procedure used for statistical monitoring of traffic in networks. MLNX-OS supports an sFlow sampling
mechanism (agent), which includes collecting traffic samples and data from counters. The sFlow datagrams are then sent to a
central collector.

Page 8
QuickSpecs HPE M-series SN2410M Switch

Standard Features

RDMA over Converged Ethernet (RoCE)

Remote Direct Memory Access (RDMA) is the remote memory management capability that allows server to server data movement
directly between application memorywithout any CPU involvement. Simplified RoCEv2 switch configuration automation supported
by just one command: roce {lossy | semi-lossless | lossless}.

Priority Flow Control

Provides an enhancement to the existing pause mechanism in Ethernet. The global Ethernet pause option stops all traffic on a link.
PFC creates eight separate virtual links on the physical link and allows any of these links to be paused and restarted independently,
enabling the network to create a no-drop class of service for virtual links.

Shared Buffers
All successfully received packets by a switch are stored on internal memory from the time they are received until the time they are
transmitted. The packet buffer is fully shared between all physical ports and is hence called a shared buffer. Buffer configuration is
applied in order to provide lossless services and to ensure fairness between the ports and priorities.

Storm Control
Storm Control is a feature which can be enabled on L2 Ethernet ports and port-channels to monitor inbound traffic to prevent
disruptions caused by a broadcast, multicast, or unicast traffic storm on the physical interfaces

Store-and-Forward
Store-and-Forward is used to describe a functionality where a switch receives a complete packet, stores it, and only then forwards it.

Since the switch makes forwarding decisions based on the destination address which is at the header of the packet, the switch can
make the forwarding decision before receiving the complete packet. This process is called cut-through, as the switch forwards part
of the packet before receiving the complete packet. Cut-through and store-and-forward modes are configurable as a switch global
or per port option.

IP Routing
IP Interfaces
The following 3 types of IP interfaces are supported:
• VLAN interface
• Loopback interface
• Router port interface

IPv6
IP version 6 (IPv6) is a routing protocol which succeeds IPv4. With the expansion of the Internet and data bases IPv6 addresses
consist of 128 bits whose purpose is to allow networks to include a significantly higher number of nodes by increasing the pool of
available unique IP addresses. IPv6 packets alleviate overhead and allow for future customizability.

OSPF
Open Shortest Path First (OSPF) is a link-state routing protocol for IP networks. It uses a link state routing algorithm and falls into
the group of interior routing protocols, operating within a single autonomous system (AS).

BGP unnumbered
This BGP feature enables a user to establish a BGP session through a P2P Layer-3 link (port or port-channel) without specifying
what the IP address of the remote neighbor is, nor what the neighbor’s ASN number is. This feature is useful when provisioning a
big data center fabric. It does not require allocation of an IP subnet on each pair of connected switches and simplifies the massive
configuration and enables automation.

Page 9
QuickSpecs HPE M-series SN2410M Switch

Standard Features

BGP
Border Gateway Protocol (BGP) is an exterior gateway protocol which is designed to transfer routing information between routers.
It maintains and propagates a table of routes which designates network reachability among autonomous systems (ASs).

BFD Infrastructure
Many protocols use slow Hello mechanisms and failure detection is usually within seconds after the problem occurs. The BFD goal
is to provide low overhead short duration detection of failures between adjacent nodes and single mechanism that can be used for
liveness detection over any media. BFD session is established by the application that uses it. There is no discovery mechanism. e.g.
in OSPF BFD session is established to neighbors that were discovered by OSPF hello protocol.

Policy Rules
Route Map
Route maps define conditions for redistributing routes between routing protocols. A route map clause is identified by a name, filter
type (permit or deny) and a sequence number. Clauses with the same name are components of a single route map; the sequence
number determines the order in which the clauses are compared to a route.

IP Prefix-List
Prefix-list is a list of entries, each of which can match one or more IP prefixes. A prefix-list is usually used to match a specific IP
prefix, mostly in relation to IP route destinations.

Multicast (IGMP and PIM)

Protocol independent multicast (PIM) is a collection of protocols that deal with efficient delivery of IP multicast (MC) data. Those
protocols are published in the series of RFCs and define different ways and aspects of multicast data distribution. PIM protocol
family includes PIM dense mode (PIM-DM), PIM sparse mode (PIM-SM, which is not supported on Mellanox platforms),
Bidirectional PIM (PIM-BIDIR) and Bootstrap router (BSR) protocol.

PIM builds and maintains multicast routing tables based on the unicast routing information provided by unicast routing tables that
can be maintained statically or dynamically by IP routing protocols like OSPF and BGP.

VRRP
The Virtual Router Redundancy Protocol (VRRP) is a computer networking protocol that provides for automatic assignment of
available IP routers to participating hosts. This increases the availability and reliability of routing paths via automatic default
gateway selections on an IP subnetwork.

MAGP
Multi-active gateway protocol (MAGP) is aimed to solve the default gateway problem when a host is connected to a set of switch
routers (SRs) via MLAG.
The network functionality in that case requires that each SR is an active default gateway router to the host, thus reducing hops
between the SRs and directly forwarding IP traffic to the L3 cloud regardless which SR traffic comes through.

DHCP Relay
Since Dynamic Host Configuration Protocol must work correctly even before DHCP clients have been configured, the DHCPserver
and DHCP client need to be connected to the same network.

In larger networks, this is not always practical because each network link contains one or more DHCP relay agents. These DHCP-R
agents receive messages from DHCP clients and forward them to DHCP servers thus extending the reach of the DHCP beyond the
local network.

Page 10
QuickSpecs HPE M-series SN2410M Switch

Standard Features

Feature Summary
Layer 3 Feature Set
• 64 VRFs supported
• IPv4 & IPv6 Routing and Route maps:
• BGP4, MP-BGP, OSPFv2, route maps
• PIM-SM and PIM-SSM (PIM-SM over MLAG)
• User and management VRFs
• BFD (BGP, OSPF, static routes)
• VRRP, Multi Active Gateway Protocol (MAGP)
• DHCPv4/v6 Relay
• Router Port, int Vlan, NULL Interface for Routing
• ECMP, 64-way
• IGMPv2/v3 Snooping Querier
• Consistent/Resilient Hashing

Network Virtualization
• VXLAN EVPN —L2 stretch use case
• VXLAN Hardware VTEP – L2 Gateway
• L2 stretch use case
• Integration with VMware NSX & OpenStack, etc
• Onyx™ certified NSX scale of 1000 VNIs

Quality of Service (QoS)

• 802.3X Flow Control
• WRED with Fast ECN
• 802.1Qbb Priority Flow Control
• 802.1Qaz ETS
• DCBX – Application TLV support
• Advanced QoS – Qualification, Rewrite, Policers – 802.1AB
• Simplified (one command) RoCEv2 configuration automation

Security
• USA Department of Defense certification—UC APL
• System secure mode—FIPS 140-2 compliance
• Storm control
• Access Control Lists (ACLs L2-L4 & user defined)
• 802.1X - Port Based Network Access Control
• Strict Security mode for DoD Apps & NIST 800 181A compliance
• CoPP (IP filter)
• Port Isolation

Synchronization
• NTP
• PTP IEEE-1588 (SMPTE profile)

Page 11
QuickSpecs HPE M-series SN2410M Switch

Standard Features

Docker Container
• Full SDK access through the container
• Persistent container & shared storage
• Container-secured mode of work:
• Limited CPU/memory/SSD usage

Software Defined Network (SDN)

• OpenFlow 1.3
• Supported controllers: ODL, ONOS, FloodLight, RYU, etc.
• NAT
• True hybrid mode with programmable pipeline

Layer 2 Feature Set

• Multi Chassis LAG (MLAG), MLAG with STP support
• Jumbo Frames (9216 Bytes)
• IGMP V2/V3, Snooping, Querier
• VLAN 802.1Q (4K)
• 256K forwarding entries that can be flexibly shared across ACL, LPM routes, Host routes, MAC, ECMP and Tunnel
applications
• Q-In-Q
• 802.1W Rapid Spanning Tree
• BPDU Filter, Root Guard
• Loop Guard, BPDU Guard
• 802.1s Multiple STP
• Rapid Per VLAN STP and PVRST
• 802.3ad Link Aggregation (LAG) & LACP
• 32 Ports/Channel
• 64 Groups Per System
• Port Isolation
• 802.1AB Link Layer Discovery Protocol (LLDP)
• Store & Forward / Cut-through switching modes
• Head of Queue Life Time Limit (HLL)
• 1/10/25/40/50/100GbE

Monitoring & Telemetry

• High Resolution Streaming Telemetry
• What Just Happened (WHJ) Root Cause Analysis
• sFLOW
• Real Time queue depth histograms & thresholds
• Port mirroring (SPAN & ERSPAN)
• Enhanced Link & phy monitoring
• BER degradation monitoring
• User mode - simplified and advanced shared buffer configuration

Page 12
QuickSpecs HPE M-series SN2410M Switch

Standard Features

Management and Automation

• ZTP
• Ansible, Puppet, SaltStack
• FTP/TFTP/SCP
• AAA, RADIUS / TACACS+ / LDAP
• JASON & CLI, WEB UI
• SNMP v1/v2/v3
• In0band and OOB management
• DHCP, SSHv2, Telnet
• SYSLOG
• USB
• 10/100/1000 Mb/s Ethernet RJ45 mgmt port
• RJ45 Serial console mgmt port (115200 BAUD)
• Dual software images, each in separate flash partitions
• Events history
• Open Network Install Environment (ONIE switch models)

Page 13
QuickSpecs HPE M-series SN2410M Switch

Service and Support

Warranty
(3-3-3) Hardware Warranty; 3-year parts; 3-year on-site (standard business hours, next business day response) and 3-year labor.
Notes: The hardware warranty covers firmware. For extended hardware support and installation information, please see the
“Services and Support” Section.

HPE Services
No matter where you are in your transformation journey, you can count on HPE Services to deliver the expertise you need when,
where and how you need it. From planning to deployment, ongoing operations and beyond, our experts can help you realize your
digital ambitions.
https://www.hpe.com/services

Consulting services
No matter where you are in your journey to hybrid cloud, experts can help you map out your next steps. From determining what
workloads should live where, to handling governance and compliance, to managing costs, our experts can help you optimize your
operations.
https://www.hpe.com/services/consulting

HPE Managed Services

HPE runs your IT operations, providing services that monitor, operate, and optimize your infrastructure and applications, delivered
consistently and globally to give you unified control and let you focus on innovation.
HPE Managed Services | HPE

Operational services
Optimize your entire IT environment and drive innovation. Manage day-to-day IT operational tasks while freeing up valuable time
and resources. Meet service-level targets and business objectives with features designed to drive better business outcomes.
https://www.hpe.com/services/operational

Recommended Services
HPE Tech Care Service
HPE Tech Care Service is the operational support service experience for HPE products. The service goes beyond traditional
support by providing access to product specific experts, an AI driven digital experience, and general technical guidance to not only
reduce risk but constantly search for ways to do things better. HPE Tech Care Service delivers a customer-centric, AI driven, and
digitally enabled customer experience to move your business forward. HPE Tech Care Service is available in three response levels.
Basic, which provides 9x5 business hour availability and a 2-hour response time. Essential which provides a 15-minute response
time 24x7 for most enterprise level customers, and Critical which includes a 6-hour repair commitment where available and outage
management response for severity 1 incidents.
https://www.hpe.com/services/techcare

HPE Complete Care Service

HPE Complete Care Service is a modular, edge-to-cloud IT environment service designed to help optimize your entire IT
environment and achieve agreed upon IT outcomes and business goals through a personalized experience. All delivered by an
assigned team of HPE Services experts. HPE Complete Care Service provides:
• A complete coverage approach -- edge to cloud
• An assigned HPE team
• Modular and fully personalized engagement
• Enhanced Incident Management experience with priority access
• Digitally enabled and AI driven customer experience
https://www.hpe.com/services/completecare

Page 14
QuickSpecs HPE M-series SN2410M Switch

Service and Support

Other related services from HPE Services

HPE Installation and Start-up Service
Provides for the hardware installation and startup of HPE branded M-Series switches with ONYX™, according to the product
specifications. The HPE service delivery technician will assist you in bringing your new hardware into operation in a timely and
professional manner.
https://www.hpe.com/h20195/v2/Getdocument.aspx?docname=a00025816enw

HPE Hardware Installation

Provides for the basic hardware installation of HPE branded M-Series ONIE switches to assist you in bringing your new hardware
into operation in a timely and professional manner.
https://www.hpe.com/h20195/v2/Getdocument.aspx?docname=5981-9356enw

HPE Lifecycle Services

HPE Lifecycle Services provide a variety of options to help maintain your HPE systems and solutions at all stages of the product
lifecycle. A few popular examples include:
• Lifecycle Install and Startup Services: Various levels for physical installation and power on, remote access setup,
installation and startup, and enhanced installation services with the operating system.
• HPE Firmware Update Analysis Service: Recommendations for firmware revision levels for selected HPE products, taking
into account the relevant revision dependencies within your IT environment.
• HPE Firmware Update Implementation Service: Implementation of firmware updates for selected HPE server, storage, and
solution products, taking into account the relevant revision dependencies within your IT environment.
• Implementation assistance services: Highly trained technical service specialists to assist you with a variety of activities,
ranging from design, implementation, and platform deployment to consolidation, migration, project management, and
onsite technical forums.
• HPE Service Credits: Access to prepaid services for flexibility to choose from a variety of specialized service activities,
including assessments, performance maintenance reviews, firmware management, professional services, and operational
best practices.
https://www.hpe.com/services/lifecycle
• For a list of the most frequently purchased services using service credits, see the HPE Service Credits Menu

HPE Education Services

Training and certification designed for IT and business professionals across all industries. Broad catalogue of course offerings to
expand skills and proficiencies in topics ranging from cloud and cybersecurity to AI and DevOps. Create learning paths to expand
proficiency in a specific subject. Schedule training in a way that works best for your business with flexible continuous learning
options.
https://www.hpe.com/services/training

Defective Media Retention

An option available with HPE Complete Care Service and HPE Tech Care Service and applies only to Disk or eligible SSD/Flash
Drives replaced by HPE due to malfunction.
Consult your HPE Sales Representative or Authorized Channel Partner of choice for any additional questions and services options.

Page 15
QuickSpecs HPE M-series SN2410M Switch

Service and Support

Parts and Materials

HPE will provide HPE-supported replacement parts and materials necessary to maintain the covered hardware product in
operating condition, including parts and materials for available and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage limitations as set forth in
the manufacturer's operating manual, product QuickSpecs, or the technical product data sheet will not be provided, repaired, or
replaced as part of these services.

How to purchase services

Services are sold by Hewlett Packard Enterprise and Hewlett Packard Enterprise Authorized Service Partners:
• Services for customers purchasing from HPE or an enterprise reseller are quoted using HPE order configuration tools.
• Customers purchasing from a commercial reseller can find services at https://ssc.hpe.com/portal/site/ssc/

AI Powered and Digitally Enabled Support Experience

Achieve faster time to resolution with access to product-specific resources and expertise through a digital and data driven
customer experience.

Sign into the HPE Support Center experience, featuring streamlined self-serve case creation and management capabilities with
inline knowledge recommendations. You will also find personalized task alerts and powerful troubleshooting support through an
intelligent virtual agent with seamless transition when needed to a live support agent.
https://support.hpe.com/hpesc/public/home/signin

Consume IT on your terms

HPE GreenLake edge-to-cloud platform brings the cloud experience directly to your apps and data wherever they are—the edge,
colocations, or your data center. It delivers cloud services for on-premises IT infrastructure specifically tailored to your most
demanding workloads. With a pay-per-use, scalable, point-and-click self-service experience that is managed for you, HPE
GreenLake edge-to-cloud platform accelerates digital transformation in a distributed, edge-to-cloud world.
• Get faster time to market
• Save on TCO, align costs to business
• Scale quickly, meet unpredictable demand
• Simplify IT operations across your data centers and clouds

To learn more about HPE Services, please contact your Hewlett Packard Enterprise sales representative or Hewlett Packard
Enterprise Authorized Channel Partner. Contact information for a representative in your area can be found at "Contact HPE"
https://www.hpe.com/us/en/contact-hpe.html

For more information: http://www.hpe.com/services

Page 16
QuickSpecs HPE M-series SN2410M Switch

Configuration Information

Step 1 - Base Configuration (Select one Model)

Description SKU
HPE SN2410M 25GbE 48SFP28 8QSFP28 Power to Connector Airflow Switch Q2F22A
HPE SN2410M 25GbE 48SFP28 8QSFP28 Power to Connector Airflow Switch Q2F22A
• 2 x 460w Power Supply with Intake Fan
• 4 x Intake Fan Tray
• 1 x Fixed Rack Mount Kit
• 2 x Power cord, 1.83m, C13-C14
• 1 x Serial cable (DB9 to RJ45)
• 2 x PSU CABEL RETAINER KIT
• 1 x HPE Warranty and Installation instructions
• 1x HPE Quick Start Guide
Notes: Requires optical transceivers listed below.
HPE SN2410M 25GbE 24SFP28 4QSFP28 Power to Connector Airflow Switch Q6M27A
• 2 x 460w Power Supply with Intake Fan
• 4 x Intake Fan Tray
• 1 x Fixed Rack Mount Kit
• 2 x Power cord, 1.83m, C13-C14
• 1 x Serial cable (DB9 to RJ45)
• 2 x PSU CABEL RETAINER KIT
• 1 x HPE Warranty and Installation instructions
• 1x HPE Quick Start Guide
Notes: Requires optical transceivers listed below.
HPE SN2410M 25GbE 24-port Upgrade E-LTU S0N97AAE
HPE SN2410M 25GbE 24SFP28 4QSFP28 Power to Connector Airflow Switch Q6M27A
HPE SN2410bM 10GbE 24-port Upgrade E-LTU S0N98AAE
Notes:
− For 24 SFP port/4 QSFP28 port SN2410M and SN2410bM switch models, upgrade licenses (S0N97AAE and S0N98AAE)
allow activation of the additional 24 SFP ports and 4 QSFP28 ports with Q6M27A respectively.
E-LTU Q6J40AAE is obsolete and replaced by S0N97AAE and E-LTU Q6J41AAE is obsolete and replaced by S0N98AAE.
− For M-series SN2410M ONIE SKUs, refer to the Transceivers & Cables supported by the NOS used.
− An odd numbered QSFP28 port configured in x4 breakout un-maps use of the adjacent even numbered QSFP28 port.

Page 17
QuickSpecs HPE M-series SN2410M Switch

Configuration Information

Step 2 – Options
Transceivers – for M-series SN2410M ONYX™ switches
Notes: Refer to HPE M-series SPOCK Connectivity Stream for latest M-series ONYX™ interconnect support matrix
Note # Description SKU
13 HPE 25Gb SFP28 Short Wave Extended Temperature 1-pack Pull Tab Optical Transceiver Q2P64B
HPE 10GbE SFP+ SR Multi-mode 300m Transceiver Q6M30A
HPE 10Gb SFP+ Short Wave 1-pack Pull Tab Optical Transceiver Q2P65A
HPE 100GbE QSFP28 SR4 100m Transceiver Q2F19A
HPE 100GbE QSFP28 500m 1310mm PSM4 Transceiver Q8J73A
10 HPE 100Gb QSFP28 LC SWDM4 Multi-mode 100m Transceiver R0R40A
3, 6,11,12 HPE 10GBASE-T SFP+ RJ45 30m 1-pack Transceiver R0R41B
3, 6, 13 HPE 25Gb SFP28 SR 30m Transceiver R0R42A
HPE BladeSystem c-Class 10Gb SFP+ SR Transceiver 455883-B21
HPE Networking X110 100M SFP LC LX Transceiver JD120B
HPE Networking X120 1G SFP LC SX Transceiver JD118B
HPE Networking X120 1G SFP LC LX Transceiver JD119B
HPE Networking X120 1G SFP RJ45 T Transceiver JD089B
7 HPE BladeSystem CClass Virtual Connect 1G SFP RJ45 Transceiver 453154-B21
8 HPE 7.6m/25ft CAT5 RJ45 M/M Ethernet C/O Cable C7539A
HPE Networking X130 10G SFP+ LC SR Transceiver JD092B
HPE Networking X130 10G SFP+ LC LR Transceiver JD094B
HPE Aruba Networking 10G SFP+ LC LR 10km SMF Transceiver J9151E
HPE Aruba Networking SFP-10GE-ZR 10GBASE-ZR SFP+ 1310nm LC Connector Pluggable JW148A
10GbE Transceiver
HPE Networking X130 10G SFP+ LC ER 40km Transceiver JG234A
1 HPE Networking X130 10G SFP+ LC LH 80km Transceiver JG915A
HPE Networking X140 40G QSFP+ CSR4 300m Transceiver JG709A
HPE Networking X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver JG661A
HPE BladeSystem c-Class 40Gb QSFP+ MPO SR4 100m Transceiver 720187-B21
HPE Networking X140 40G QSFP+ LC BiDi 100m MM Transceiver JL251A
HPE 40Gb QSFP+ Bidirectional Transceiver 841716-B21
HPE Networking X140 40G QSFP+ LC LR4L 2km SM Transceiver JL286A
3, 13 HPE Aruba Networking 25G SFP28 LC LR 10km SMF Transceiver JL486A
3, 13 HPE Networking X190 25G SFP28 LC SR 100m MM Transceiver JL293A
HPE 100GbE QSFP28 500m 1310mm PSM4 Transceiver Q8J73A
HPE Networking X130 10G SFP+ LC SR Transceiver JD092B
HPE Networking X140 40G QSFP+ MPO SR4 Transceiver JG325B
3, 13 HPE 25Gb SFP28 SR 100m Transceiver 845398-B21
3 HPE QSFP28 to SFP28 Adapter 845970-B21
HPE Networking X150 100G QSFP28 LC LR4 10km SM Transceiver JL275A

Page 18
QuickSpecs HPE M-series SN2410M Switch

Configuration Information

Note # Description SKU

HPE Networking X150 100G QSFP28 CWDM4 2km SM Transceiver JH673A
10 HPE Networking X150 100G QSFP28 LC SWDM4 100m MM Transceiver JH419A
9 HPE 100Gb QSFP28 Bidirectional Transceiver 845972-B21
15 HPE 100GbE QSFP28 LC DR1 500m 1-pack Transceiver R8M61A
3,13 HPE 25/50GbE SFP56 SR 100m 1-pack Transceiver R8M65A
HPE Alletra 6000 2x100Gb QSFP28 MPO SR4 100m FIO Transceiver R7D08A
HPE Alletra 6000 2x100Gb QSFP28 MPO SR4 100m Transceiver R7D12A
HPE Alletra 6000 2x10Gb SFP+ SR FIO Transceiver R7D05A
HPE Alletra 6000 2x10Gb SFP+ SR Transceiver R7D09A
3,13 HPE Alletra 6000 2x25Gb SFP28 SR 100m FIO Transceiver R7D07A
3,13 HPE Alletra 6000 2x25Gb SFP28 SR 100m Transceiver R7D11A
Direct Attached Cables (DAC)
5 HPE Networking X240 10G SFP+ SFP+ 0.65m DAC Cable JD095C
5 HPE Networking X240 10G SFP+ SFP+ 1.2m DAC Cable JD096C
5 HPE Networking X240 10G SFP+ SFP+ 3m DAC Cable JD097C
5 HPE Networking X240 10G SFP+ SFP+ 5m DAC Cable JG081C
HPE C-series 3M Passive Copper SFP+ Cable K2Q21A
HPE C-series 5M Passive Copper SFP+ Cable K2Q22A
5 HPE Networking X240 10G SFP+ 7m DAC Cable JC784C
5 HPE Aruba Networking 10G SFP+ to SFP+ 1m Direct Attach Copper Cable J9281D
5 HPE Aruba Networking 10G SFP+ to SFP+ 3m Direct Attach Copper Cable J9283D
5 HPE Aruba Networking 10G SFP+ to SFP+ 7m Direct Attach Copper Cable J9285D
Direct Attached Cables (DAC)
5,13 HPE Aruba Networking 25G SFP28 to SFP28 0.65m Direct Attach Cable JL487A
5,13 HPE Aruba Networking 25G SFP28 to SFP28 3m Direct Attach Copper Cable JL488A
5,13 HPE Aruba Networking 25G SFP28 to SFP28 5m Direct Attach Copper Cable JL489A
HPE Networking Comware X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable JG326A
HPE Networking Comware X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable JG327A
HPE Networking Comware X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable JG328A
HPE Networking Comware X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable JG329A
HPE Networking Comware X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable JG330A
HPE Networking Comware X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable JG331A
HPE BladeSystem c-Class 40G QSFP+ to QSFP+ 3m Direct Attach Copper Cable 720199-B21
HPE BladeSystem c-Class 40G QSFP+ to QSFP+ 5m Direct Attach Copper Cable 720202-B21
5 HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 3m Direct Attach Copper Cable 487655-B21
5 HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 5m Direct Attach Copper Cable 537963-B21
HPE Networking X242 40G QSFP+ to QSFP+ 1m Direct Attach Copper Cable JH234A
HPE Networking X242 40G QSFP+ to QSFP+ 3m Direct Attach Copper Cable JH235A
HPE Networking X242 40G QSFP+ to QSFP+ 5m Direct Attach Copper Cable JH236A
HPE Networking X240 QSFP28 4xSFP28 1m Direct Attach Copper Cable JL282A
Note # Description SKU
HPE Networking X240 QSFP28 4xSFP28 3m Direct Attach Copper Cable JL283A

Page 19
QuickSpecs HPE M-series SN2410M Switch

Configuration Information

HPE Networking X240 QSFP28 4xSFP28 5m Direct Attach Copper Cable JL284A
4 HPE 100Gb QSFP28 to 4x25Gb SFP28 3m Direct Attach Copper Cable 845416-B21
HPE Aruba Networking 100G QSFP28 to QSFP28 5m Direct Attach Copper Cable R0Z26A
5, 13 HPE 25Gb SFP28 to SFP28 3m Direct Attach Copper Cable 844477-B21
5, 13 HPE 25Gb SFP28 to SFP28 0.5m Direct Attach Copper Cable R4G18A
5, 13 HPE 25Gb SFP28 to SFP28 1m Direct Attach Copper Cable R4G19A
5, 13 HPE 25Gb SFP28 to SFP28 5m Direct Attach Copper Cable 844480-B21
HPE 100Gb QSFP28 to QSFP28 5m Direct Attach Copper Cable 845408-B21
4, 13 HPE 100GbE QSFP28 to 4x25GbE SFP28 1m Direct Attach Copper Cable Q9S72A
HPE Networking X240 100G QSFP28 1m DAC Cable JL271A
HPE Networking X240 100G QSFP28 3m DAC Cable JL272A
HPE Networking X240 100G QSFP28 5m DAC Cable JL273A
HPE Aruba Networking 100G QSFP28 to QSFP28 1m Direct Attach Copper Cable R0Z25A
HPE Aruba Networking 100G QSFP28 to QSFP28 3m Direct Attach Copper Cable JL307A
HPE 100Gb QSFP28 to QSFP28 3m Direct Attach Copper Cable 845406-B21
HPE 100Gb QSFP28 to QSFP28 0.5m Direct Attach Copper Cable R8M59A
HPE 200GbE QSFP56 to 2xQSFP56 2m Direct Attach Copper Cable R8M57A
HPE 200GbE QSFP56 to 2xQSFP56 2.5m Direct Attach Copper Cable R8M58A
14 HPE 200Gb QSFP56 to 4x50/25Gb SFP56 2.5m Direct Attach Copper Cable R6F27A
HPE 200Gb QSFP56 to QSFP56 0.5m Direct Attach Copper Cable R5Z76A
HPE 200Gb QSFP56 to QSFP56 1m Direct Attach Copper Cable R5Z77A
HPE 200Gb QSFP56 to QSFP56 2m Direct Attach Copper Cable R5Z78A
HPE 200Gb QSFP56 to QSFP56 2.5m Direct Attach Copper Cable R5Z79A
HPE Alletra 6000 2x10Gb SFP+ to SFP+ 3m Direct Attach Copper Cable R7D16A
3,13 HPE Alletra 6000 2x25Gb SFP28 to SFP28 3m Direct Attach Copper Cable R7D17A
HPE Alletra 6000 2x100Gb QSFP28 to QSFP28 3m Direct Attach Copper Cable R7D18A
Active Optical Cable (AOC)
HPE 40GbE QSFP+ to 4x10GbE SFP+ 5m Active Optical Cable Q9S66A
13 HPE 25GbE SFP28 to SFP28 3m Smart Active Optical Cable Q9S67A
13 HPE 25GbE SFP28 to SFP28 5m Smart Active Optical Cable Q9S68A
13 HPE 25GbE SFP28 to SFP28 10m Smart Active Optical Cable Q9S69A
13 HPE 25GbE SFP28 to SFP28 15m Smart Active Optical Cable Q9S70A
HPE 100GbE QSFP28 to QSFP28 5m Active Optical Cable Q9S71A
HPE BladeSystem c-Class QSFP+ to 4x10G SFP+ 15m Active Optical Cable 721076-B21
HPE BladeSystem c-Class 40G QSFP+ to QSFP+ 15m Active Optical Cable 720211-B21
HPE 100Gb QSFP28 to QSFP28 7m Active Optical Cable 845410-B21
HPE 100Gb QSFP28 to QSFP28 15m Active Optical Cable 845414-B21
HPE QSFP28 to 4x25Gb SFP28 7m Active Optical Cable 845420-B21

Page 20
QuickSpecs HPE M-series SN2410M Switch

Configuration Information

Note # Description SKU

HPE QSFP28 to 4x25Gb SFP28 15m Active Optical Cable 845424-B21
13 HPE 25Gb SFP28 to SFP28 7m Active Optical Cable 844483-B21
13 HPE 25Gb SFP28 to SFP28 15m Active Optical Cable 845396-B21
Configuration Rules and Notes
Notes:
− 1: JG915A - Storage connectivity support for this transceiver is limited to 40Km
− 2: QSA (QSFP+ to SFP+) adapter (655874-B21) is being phased out of the M-series support. Use HPE QSA28 (QSFP28 to
SFP28) adapter (845970-B21) that is compatible with all M-series switches to convert a QSFP+/QSFP28 slot to a single
SFP+/SFP28 slot for 1G to 25G operation.
− 3: HPE QSA28 (QSFP28 to SFP28) adapter (845970-B21) is compatible with all M-series switches and is required with this
transceiver to convert a QSFP28 slot to a single SFP28 or SFP+ slot for 1G, 10G, or 25G operation with this switch model.
− 4: QSFP (+ or 28) cable end is supported in SN2010M. The SFP (+ or 28) end is not supported in the SN2010M
− 5: The SN2010M 25G DAC connectivity to another M-series switch or 3rd party switch is limited to a 0.5m DAC cable. End
device connectivity may use 1m or a 3m (26 gauge) 25G DAC. 10G DAC up to 5m is supported between SN2010M switches.
− 6: This HPE transceiver is compatible and supported for use in the SFP28 slots with this M-series switch model and is not
restricted to use only with a QSA28 in QSFP28 slots.
− 7: This HPE transceiver is compatible and supported for use in the SFP28 slots and also the QSFP28 slots with this M-series
switch model with the QSA28 (QSFP28 to SFP28) adapter (845970-B21).
− 8: This RJ45 crossover cable is compatible and supported for use when directly connecting the two M-series switch MGMT
ports. When configuring MLAG and also utilizing in-band management, the MGMT0 ports of the two switches should be
connected.
− 9: The interoperable 845972-B21 and 855817-B21 HPE 100Gb QSFP28 Bidirectional XCVRs do not interoperate with the
JH419A and R0R40A transceivers.
− 10: 100Gbe SWDM4 LC transceivers JH419A and R0R40A are interoperable.
− 11: 10Gbase-T SFP+ RJ45 transceiver supports maximum length 30M CAT6a cable. R0R41B is qualified for use at 10GbE
and shall not be operated at 1GbE.
− 12: ONYX-3.8.2008 and later revisions are required for support of R0R41B transceivers in the SN2410M and SN2410bM
switches with no utilization limit.
− 13: SN2410bM models support 1/10GbE ports and cannot be upgraded for 25GbE support. SN2410M models support
1/10/25GbE ports. SN2410bM and SN2410M QSFP28 ports support breakout to 4x 1 or 10 or 25GbE ports.
− 14: All 4 R6F27A cable ports must be set as NRZ or PAM4. A mix between the two technologies is not supported.
− 15: The R8M61A class 6 power requirements support use in the SN2410M and SN2410bM ports 49, 50, 55, 56.

Page 21
QuickSpecs HPE M-series SN2410M Switch

Configuration Information

Supported Optical Cables for all M-series switch models

Description SKU
HPE Premier Flex MPO/MPO Multi-mode OM4 12 Fiber 10m Cable QK729A
HPE Premier Flex MPO/MPO Multi-mode OM4 8 Fiber 50m Cable QK731A
HPE Premier Flex LC/LC Multi-mode OM4 2 Fiber 1m Cable QK732A
HPE Premier Flex LC/LC Multi-mode OM4 2 Fiber 2m Cable QK733A
HPE Premier Flex LC/LC Multi-mode OM4 2 Fiber 5m Cable QK734A
HPE Premier Flex LC/LC Multi-mode OM4 2 Fiber 15m Cable QK735A
HPE Premier Flex LC/LC Multi-mode OM4 2 Fiber 30m Cable QK736A
HPE Premier Flex LC/LC Multi-mode OM4 2 Fiber 50m Cable QK737A
HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable AJ833A
HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable AJ834A
HPE LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable AJ835A
HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable AJ836A
HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable AJ837A
HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable AJ838A
HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable AJ839A
HPE Premier Flex MPO/MPO OM4 100m Cable H6Z30A
HPE Multi Fiber Push On to 4 x Lucent Connector 5m Cable K2Q46A
HPE Multi Fiber Push On to 4 x Lucent Connector 15m Cable K2Q47A
HPE Premier Flex MPO/MPO Multi-mode OM4 12 Fiber 1m Cable Q1H63A
HPE Premier Flex MPO/MPO Multi-mode OM4 12 Fiber 2m Cable Q1H64A
HPE Premier Flex MPO/MPO Multi-mode OM4 12 Fiber 5m Cable Q1H65A
HPE Premier Flex MPO/MPO Multi-mode OM4 12 Fiber 15m Cable Q1H66A
HPE Premier Flex MPO/MPO Multi-mode OM4 12 Fiber 30m Cable Q1H67A
HPE Premier Flex MPO to 4xLC 30m Cbl Q1H68A
HPE Premier Flex MPO to 4 x Lucent Connector 50m Cable Q1H69A
HPE 5m Single-Mode LC/LC Fibre Channel Cable AK346A
HPE Premier Flex MPO12 to MPO12 APC Single-mode 50m 1-pack Cable R6F28A
HPE Premier Flex MPO12 to MPO12 APC Single-mode 100m 1-pack Cable R6F29A
HPE Premier Flex MPO12 to MPO12 APC Single-mode 300m 1-pack Cable R6F30A
HPE Premier Flex MPO12 to MPO12 APC Single-mode 500m 1-pack Cable R6F31A

Page 22
QuickSpecs HPE M-series SN2410M Switch

Technical Specifications

Family Information
HPE SN2010M HPE SN2100M HPE SN2410M HPE SN2700M
Description Ideal ½ width ToR Ideal ½ width ToR 1/10/25GbE ToR 40/50/100GbE spine and aggregation
1/10/25/40/50/10 10/25/40/50/100G 40/50/100GbE ToR
0 GbE bE
Ports Speeds 18 x 1/10/25GBE + 16x40/100GbE 48x10/25GbE 32x40/100GbE
4x40/100GbE 64x10/25GbE + 8x40/100GbE 64x10/25GbE

Minimum 18 + 4 Ports 8 Ports - pay as you 24x10/25 GbE + 16 Ports - pay as you grow with 16
Configuration grow with 8 4x100 GbE Ports - additional port option
additional port pay as you grow
option 24/4 additional port
option
Size 1U ( ½ 19” wide) 1U ( ½ 19” wide) 1U 1U
Switching 1.7Tb/s 3.2Tb/s 4Tb/s 6.4Tb/s
Capacity
Processing 1.26Bpps 2.38Bpps 2.97Bpps 4.76Bpps
Capacity
Forwarding Cut Through and Cut Through and Cut Through and Cut Through and Store-and-forward
Technology Store-and-forward Store-and-forward Store-and-forward
Latency 300ns 300ns 300ns 300ns
Typical Power 57W 94W 165W 150W
Consumption
Energy full load: full load: 80 Plus Gold 80 Plus Gold
Efficiency 91.3% @ 91.3% @
115Vac/60Hz , 115Vac/60Hz ,
92.6% @ 92.6% @
230Vac/50Hz 230Vac/50Hz
Supported ONYX™ & ONIE ONYX™ & ONIE ONYX™ & ONIE ONYX™ & ONIE
Operating
Systems**
System Memory 8GB 8GB 8GB 8GB
SSD Memory 16GB 16GB 32GB 32GB
Packet Buffer 16MB 16MB 16MB 16MB
1GbE Mgmt 1 RJ45 1 RJ45 2 RJ45 2 RJ45
Ports
Serial Ports 1 RJ45 1 RJ45 1 RJ45 1 RJ45
USB Ports 1 Mini USB 1 Mini USB 1 1
Airflow Power-to- Power-to-Connector Power-to-Connector Power-to-Connector and Connector-to-
Connector and and Connector-to- and Connector-to- Power airflow; hot swappable
Connector-to- Power airflow Power airflow; hot
Power airflow swappable
Power Supplies 2 (1+1 redundant) 2 (1+1 redundant) 2 (1+1 redundant) 2 (1+1 redundant)
not replaceable not replaceable hot-swappable hot-swappable

Page 23
QuickSpecs HPE M-series SN2410M Switch

Technical Specifications

HPE SN2010M HPE SN2100M HPE SN2410M HPE SN2700M

Fans 2 fans not 2 fans not 4 (N+1 redundant) 4 (N+1 redundant)

replaceable replaceable hot-swappable hot-swappable
Power Supplies Frequency: Frequency: Frequency: Frequency:
50-60Hz 50-60Hz 50-60Hz 50-60Hz
Input range: Input range: Input range: Input range:
100-264 AC 100-264 AC 100-264 AC 100–264 AC
Input current Input current Input current Input current
4.5-2.9A 4.5-2.9A 4.5-2.9A 4.5-2.9A
Size 1.72’’ x 7.87’’ x 1.72’’ x 7.87’’ x 1.72’’ x 17.24’’ x 1.72’’ x 16.84’’ x 27’’(43.9mm x 427.8mm x
20’’(43.9mm x 20’’(43.9mm x 17’’(43.9mm x 686mm)
200mm x 508mm) 200mm x 508mm) 438mm x 436mm)
Weight 4.53kg (10Lb) 4.53kg (10Lb) 8.52kg (18.8Lb) 11.1kg (24.5Lb)

Notes: **There are separate M-Series SKUs for ONIE and ONYX™ switch models.

HPE M-Series SN2410 Switch Specifications

HPE SN2410M 25GbE 48SFP28 8QSFP28 HPE SN2410M 25GbE 24SFP28 4QSFP28 Switch
Switch
HPE SN2410M HPE SN2410M
Description 25GbE ToR switch with 100GbE uplinks 25GbE ToR switch with 100GbE uplinks

Ports Speeds • 48x25GbE • 24x25GbE

+ 8x100GbE + 4x100GbE
Minimum 48x25GbE 24x25 GbE + 4x100 GbE Ports - pay as you grow with
Configuration + 8x100GbE upgrade license (S0N97AAE) for 24 additional 25GbE ports
option
Size 1U 1U
Switching 4Tb/s 4Tb/s
Capacity
Processing 2.97Bpps 2.97Bpps
Capacity
Forwarding Cut Through Cut Through
Technology
Latency 300ns 300ns
Typical Power 165W 165W
Consumption
Supported ONYX™ & ONIE ONYX™
Operating
Systems
System Memory 8GB 8GB
SSD Memory 32GB 32GB
Packet Buffer 16MB 16MB

Page 24
QuickSpecs HPE M-series SN2410M Switch

Technical Specifications

HPE SN2410M 25GbE 48SFP28 8QSFP28 HPE SN2410M 25GbE 24SFP28 4QSFP28 Switch
Switch
HPE SN2410M HPE SN2410M
1Gb Mgmt 2 RJ45 2 RJ45
Ports
Serial Ports 1 RJ45 1 RJ45
USB Ports 1 1
Airflow Power-to-connector only; hot swappable Power-to-connector only; hot swappable

Power Supplies 2 (1+1 redundant) 2 (1+1 redundant)

hot-swappable hot-swappable
Fans 4 (N+1 redundant) 4 (N+1 redundant)
hot-swappable hot-swappable

HPE SN2410M 10GbE 48SFP+ 8QSFP28 HPE SN2410M 10GbE 24SFP+ 4QSFP28 Switch
Switch
Power Supplies Frequency: 50-60Hz Frequency: 50-60Hz
Input range: 100-264 AC Input range: 100-264 AC
Input current 4.5-2.9A Input current 4.5-2.9A
Size 1.72’’ x 17.24’’ x 17’’(43.9mm x 438mm x 1.72’’ x 17.24’’ x 17’’(43.9mm x 438mm x 436mm)
436mm)
Weight 8.52kg (18.8Lb) 8.52kg (18.8Lb)

Environment
• Operating temperature
0°C to 40°C
• Non-operating temperature
-40ºC to 70ºC
• Operating relative humidity (operational)
5% to 85% noncondensing
• Operating Altitude 0 - 3050m
RoHS compliant

Electrical characteristics
• Frequency 50/60 Hz
• Voltage 90 - 264 VAC

Safety
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+AC:2011+A2:2013, IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am
2:2013 and EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + AC:2011 + A2:2013, UL 60950-1:2007, CAN/CSA C22.2
60950 -1:2007+A1:2011+A2:2014, IEC 60950-1 Ed. 2.0 :2005 + Am 1:2009+ Am 2:2013, LV CU TR 004/2011 and EMC CU TR
020/2011 Technical Regulation, DSTU EN 55032:2014 and DSTU EN 60950-1:2014

Page 25
QuickSpecs HPE M-series SN2410M Switch

Technical Specifications

EMC
EN 55032:2012 class A, EN 55024:2010, EN 61000-3-2:2014, EN 61000-3-3: 2013, EN 61000-4-2: 2002, EN 61000
43:2006+A1(08)+A2(10), EN 61000-4-4: 2004+A1(10), EN 61000-4-5: 2006, EN 61000-4-6: 2014
EN 61000-4-11:2004, FCC 47 CFR, Part 15:2017, Sub-part B, Class A, ICES-003, Issue 6: 2016 Class A, VCCI V-3/2015.04 Class
A, AZ/NZS CISPR 32:2015 Class A, KN22:2009 class A/ KN24:2009

Acoustic
High-speed fan: : SN2410 – 70.9 dB(A)

Typical power with passive cables (ATIS)

165W

HPE Power Advisor

To address a need to accurately estimate power requirements and to ensure the appropriate levels of power and cooling and
power-related operating costs, HPE created the HPE Power Advisor utility. The HPE Power Advisor utility provides accurate
and meaningful estimates of the power needs for HPE servers, storage, and switches including M-series Ethernet switches

Protocols
Standards
• 802.1D Bridging and Spanning Tree
• 802.1p QOS
• 802.1Q VLAN Tagging
• 802.1w Rapid Spanning Tree
• 802.1s Multiple Spanning Tree Protocol
• 802.1AB Link Layer Discovery Protocol
• 802.1Qaz ETS
• 802.1Qbb PFC
• 802.3ad Link Aggregation with LACP
• 802.3ba
• 802.3x Flow Control
• 1000BASE-KX
• 802.3ae 10 Gigabit Ethernet
SNMP MIBs
• RFC 4001 INET-ADDRESS-MIB
• IANAifType-MIB
• RFC 2863 IF-MIB
• RFC 4318 RSTP-MIB
• LLDP-MIB 802.1AB-2005
• RFC 4363 Q-BRIDGE-MIB
• RFC 4188 BRIDGE-MIB
• RFC 4133 ENTITY-MIB
• RFC 3433 ENTITY-SENSOR-MIB
• RFC 4268 ENTITY-STATE-MIB
• RFC 2572 SNMP-MPD-MIB
• RFC 4293 IP-MIB
• RFC 4022 TCP-MIB
• RFC 4113 UDP-MIB

Page 26
QuickSpecs HPE M-series SN2410M Switch

Technical Specifications

SNMP MIBs
• RFC 4292 IP-FORWARD-MIB
• RFC 2790 HOST-RESOURCES-MIB
• RFC 1213
• SNMPV2-CONF
• RFC 2579 SNMPV2-TC MIB
• RFC 3417 SNMPV2-TM MIB
• RFC 3826 SNMP-USM-AES-MIB
• Mellanox SMI MIB
• Mellanox IF-VPI-MIB
• Mellanox enhanced ENTITY-MIB
• Mellanox Power-Cycle-MIB
• Mellanox SW-Update-MIB
• Mellanox Config-MIB

Page 27
QuickSpecs HPE M-series SN2410M Switch

Summary of Changes

Date Version History Action Description of Change

26-Feb-2024 Version 21 Changed Networking product names were updated.
13-Nov-2023 Version 20 Changed HPE Services Rebranding
03-Oct-2022 Version 19 Changed Overview, Standard Features, Configuration Information and Technical
Specifications sections were updated
Obsolete SKUs were removed and replaced
06-Jun-2022 Version 18 Changed Overview, Standard Features and Service and Support sections were updated
04-Oct-2021 Version 17 Changed Service and Support section was updated
02-Aug-2021 Version 16 Changed Service and Support section was updated
19-Apr-2021 Version 15 Changed Configuration Information section was updated.
15-Feb-2021 Version 14 Changed Overview, Standard Features and Technical Specifications sections were
updated
03-Aug-2020 Version 13 Changed Overview, Standard Features and Configuration Information sections were
updated
06-Jul-2020 Version 12 Changed QuickSpecs layout was updated and Branding Refresh was applied.
16-Mar-2020 Version 11 Changed Configuration Information and Technical Specifications sections were
updated.
03-Feb-2020 Version 10 Changed Overview, Service and Support, Family Information and Technical
Specifications sections were updated.
07-Oct-2019 Version 9 Changed Added ONIE SKUs and updated features and transceivers
05-Aug-2019 Version 8 Changed Overview, Service and Support, Family Information and Technical
Specifications sections were updated.
02-Apr-2019 Version 7 Changed Family Information and Technical Specifications sections were updated.
07-Jan-2019 Version 6 Changed Overview, Models, Service and Support, Family Information, Configuration
Information and Technical Specifications sections were updated
15-Oct-2018 Version 5 Changed Overview section was updated.
SKUs descriptions were updated.
Obsolete SKUs were removed from Configuration Information section.
New SKUs were added in Configuration Information section.
02-Apr-2018 Version 4 Changed SKU descriptions were updated.
Obsolete SKUs were removed.
08-Jan-2018 Version 3 Changed The support matrix was updated and few typos were fixed.
02-Oct-2017 Version 2 Changed Fixed a typo on the main image.
25-Sep-2017 Version 1 New New QuickSpecs

Page 28
QuickSpecs HPE M-series SN2410M Switch

Copyright

Make the right purchase decision.

Contact our presales specialists.

Get updates
© Copyright 2024 Hewlett Packard Enterprise Development LP. The information contained herein is subject
to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set
forth in the express warranty statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for
technical or editorial errors or omissions contained herein.

a00021856enw - 16026 - Worldwide - V21 - 26-February-2024

Page 29