R

ANC
UL-LISTED
[email protected] www.anc.sa CATALOG
 ‫‪R‬‬

‫ٌ‬
‫وﺧﺪﻣﺎت ﻣﺘﻤﻴﺰة‬ ‫ٌ‬
‫ﻋﺎﻟﻴﺔ ‪..‬‬ ‫ٌ‬
‫ِﻋﺘﻤﺎدﻳﺔ‬
‫ا‬
 R

INTRODUCTION
(Arif al-Nahdi Co. LTD.)
is a Specialist company in supplying,
assembling and manufacturing of safety
systems with its Head Quarter at Riyadh, KSA,
is one of the largest Fire Fighting Equipment
facilities in the Region and has many
R
branches over KSA.
vision to develop wth Wisdom
and Prosper in Harmony, and continue
to be the leader in the Fire Protection
industry providing excellent services and
superior products for many years to come.

ANCUl Listed Fire Pump System Technology

With a new vision that aims to be ANCUL devloped highly skilled team in
a distinguished industrial and assembly and pump packages testing ..
excellence service and a pioneer in succeeded fabricated fire pump skids, where
the field of fire pumps and safety products this devloped technology assure providing
of high quality and reliability, we were handle, install & maintain, where all pumping
introduce international products bearing elements, drivers, controllers are all skid
high specifications in accordance with mounted, pre-piped, wired & factory tested.
international standards as new brand called
ANCUL, which we seek to be the best way
for protecting property and lives and to cover
the needs and requirements of customers.

WWW.ANC.SA
 R

This chapter contains all information related to

pumps of all type Split-Case and End Suction.

page 01

CHAPTER 1
[email protected] www.anc.sa PUMPS
 R

INTRODUCTION
The fire pump sets are being mounted and aligned with electric motor,
and/or diesel engine on a common base plate. The fire pump package includes
all pump fittings such as manometers, casing relief valve, and automatic air release
valve (for split-case models) to be supplied with approved electric and/or
diesel fire pump controller. Our fire pump sets are being delivered as a package
to be operated as for Plug&Play type.

ANCUL approved fire pumps are ideally developed and produced

either for small flows or high flows through well-designed compact packages.
ANCUL Fire pumps have back pull out design for easy maintenance,
self-venting center line discharge, and low NPSH requirements. The pump construction
is ductile iron body, bronze fitted with packing. The shaft and sleeves are in AISI316 Stainless
steel and be supported by thrust ball bearings, and radial roller bearing.

Electric Pump

FLOW / GPM BAR TYPE PUMP MODEL PUMP POWER / HP SIZE / In. SPEED
500 8 END SUCTION ANCEF 65/20 75 3” – 2.5” 3550
750 8-9.7 END SUCTION ANCEF 80/20 100 4” – 3” 3550
750 10 SPLIT CASE ANCSF5-3x10 100 5” – 3” 3550
1000 10 SPLIT CASE ANCSF6-5x10 125 6” – 5” 3550
1250 10 SPLIT CASE ANCSF8-6x10 175 8” – 6” 3550

Diesel Pump

FLOW / GPM BAR TYPE PUMP MODEL PUMP POWER / KW SIZE / In. SPEED
500 8 END SUCTION ANCEF 65/26 62 3” – 2.5” 2980
750 8-9.7 END SUCTION ANCEF 80/26 62 4” – 3” 2980
750 10 SPLIT CASE ANCSF5-4x13 86 5” – 3” 2980
1000 10 SPLIT CASE ANCSF6-5x10 86 6” – 5” 2980
1250 10 SPLIT CASE ANCSF8-6x10 131 8” – 6” 2980

page 02
WWW.ANC.SA
 R
R

This section contains all information related to

Split-Case pumps of all types electric and diesel.

page 03

SECTION 1
[email protected] www.anc.sa
SPLIT-CASE PUMPS
 R

INTRODUCTION Split-Case Electric

ANC UL LISTED series-Double Suction, split-casing pumps are in-line designed, space saving, easy
maintenance horizontal type. Our split-case pumps are heavy-duty designed with replaceable wear
rings and sleeves. Bearings are mounted and can be replaced without opening pump case. Each
stuffing box is fitted with bronze gland and with a stuffing box extension to facilitate the packaging
rings removal. The pump construction is ductile iron body, bronze fitted with packaging. The shaft
and sleeves are in AISI316 stainless steel and be supported by heavy-duty ball bearings and roller
bearing.

Matrial Details
4 6 2 8 3 7 5 17 14 12 10 18 19 21 9 15 22 11
Ø55 h6
Ø35 js6

Ø35 js6

20 13 1 16

page 04
WWW.ANC.SA
 R

Matrial DetailsCont.
Matrial Details Cont. Split-Case Electric

Model ANCSF 5-3x10 ANCSF 5-4x13 ANCSF 6-5x10

NO. Part No. Part Name Part No. Part Name Part No. Part Name
1 ANCSF125-80-250-0001 Lower Casing ANCSF125-100-300-0001 Lower Casing ANCSF150-125-250-0001 Lower Casing
2 ANCSF125-80-250-0002 Upper Casing ANCSF125-100-300-0002 Upper Casing ANCSF150-125-250-0002 Upper Casing
3 ANCSF125-80-250-0100 Rotor Assembly ANCSF125-100-300-0100 Rotor Assembly ANCSF150-125-250-0100 Rotor Assembly
4 ANCSF-207.00-ZZ-6307 Bearing – DE ANCSF-207.00-ZZ-6307 Bearing – DE ANCSF-207.00-ZZ-6307A Bearing – DE
5 ANCSF-307.00-ZZ-6307 Bearing – NDS ANCSF-307.00-ZZ-6307 Bearing – NDS ANCSF-307.00-ZZ-6307A Bearing – NDS
6 ANCSF-401.00-50B Packing Seal Assembly ANCSF-401.00-50B Packing Seal Assembly ANCSF-401.00-50B Packing Seal Assembly
7 ANCSF-700.00-AF Flushing Pipe ANCSF-700.00-AF Flushing Pipe ANCSF-700.00-AF Flushing Pipe
8 B2106-72A-131x146x18 Casing Wear Ring B2106-72A-131x146x25 Casing Wear Ring B2106-72A-160x175x22 Casing Wear Ring
9 TB125-125 TB125-125 TB125-125
10 DS-00 - M12x60 Jackscrew DS-00 - M12x60 Jackscrew DS-00 - M12x60 Jackscrew
11 GB/T3287 T8-1/2-Zn-D Plug NPT1/2 “ GB/T3287 T8-1/2-Zn-D Plug NPT1/2 “ GB/T3287 T8-1/2-Zn-D Plug NPT1/2 “
12 GB/T3287 T8-3/4-Zn-D Plug NPT3/4 “ GB/T3287 T8-3/4-Zn-D Plug NPT3/4 “ GB/T3287 T8-3/4-Zn-D Plug NPT3/4 “
13 GB/T5783 - M16x55 Hex Head Bolt GB/T5783 - M16x55 Hex Head Bolt GB/T5783 - M16x55 Hex Head Bolt
14 GB/T6170 - M12 Hexagon Nut GB/T6170 - M12 Hexagon Nut GB/T6170 - M12 Hexagon Nut
15 GB/T70.3 - M8x20 Screws GB/T70.3 - M8x20 Screws GB/T70.3 - M8x20 Screws
16 GB/T879.1 - 8x16 Electric Cylindrical Pin GB/T879.1 - 8x20 Electric Cylindrical Pin GB/T879.1 - 8x20 Electric Cylindrical Pin
17 GB/T881 - 12x100 Screw Tail Taper Pin GB/T881 - 12x100 Screw Tail Taper Pin GB/T881 - 12x100 Screw Tail Taper Pin
18 GB/T898 – AM20x65 Studs GB/T898 – AM20x65 Studs GB/T898 – AM20x65 Studs
19 GB/T923 – AM20 Cover Nut GB/T923 – AM20 Cover Nut GB/T923 – M20 Cover Nut
20 GB/T93 – 16 Spring Washers GB/T93 – 16 Spring Washers GB/T93 – 16 Spring Washers
21 GB/T97.1 – 20 Flat Washers GB/T97.1 – 20 Flat Washers GB/T97.1 – 20 Flat Washers
22 0.3 mm Split – Cases Gasket - Split – Cases Gasket - Split – Cases Gasket

page 05
WWW.ANC.SA
WWW.ANC.SA
 R

Dimention
Dimention Split-Case Electric

L M
K N

A
T

U
Ø55 h6
Ø35 js6

Ø35 js6
S

B
J

C
O
R

D
P
Q E
F

Model ANCSF 5-3x10 ANCSF 5-4x13 ANCSF 6-5x10 ANCSF 6-5x13 ANCSF 6-5x16 ANCSF 8-6x10 ANCSF 8-6x13
DN 5/3 5/4 6/5 6/5 6/5 8/6 8/6
A 280 310 320 340 380 340 360
B 160 170 200 220 285 200 230
C 315 315 400 400 455 400 455
D 120 260 260 320 420 300 320
E 160 340 340 400 500 380 400
F 200 420 420 480 580 460 480
J 170 170 200 220 220 200 230
L 250 290 300 350 350 300 350
M 330 330 350 400 500 400 415
N 345 350.4 350.4 350.4 400 360.4 400
O 4x 20 4x 20 4x 20 4x 20 4x 25 4x 20 4x 25
K 434 438.5 448.5 448.5 520 448.5 520
P 240 270 270 270 340 270 340
Q 290 320 320 320 390 320 390
R 30 30 30 30 30 30 30
Rotor 35h6 35h6 35h6 35h6 45h6 35h6 45h6
T 88 88 88 88 88 88
U 75 75 75 75 75 75

all sizes are in cm unit.

page 06
WWW.ANC.SA
WWW.ANC.SA
 R

INTRODUCTION Split-Case Diesel

INTRODUCTION Diesel Split-Case

ANCUL fire pumps are being directly connected through flexible coupling to the
engines manufactured by Clarke or NM and Kirloskar. All our approved pumps are having
UL Listed, FM Approved engines with granted and guaranteed continuous power ratings.
The diesel engines conform to the requirements of NFPA 20 and specifically approved for
fire pump application and service. Diesel engines operate at a rated speed not exceeding the
above RPM and develop sufficient horsepower to drive the pump with reserve power.

Matrial Details
Matrial Details
4 6 2 8 3 7 5 17 14 12 10 18 19 21 9 15 22 11
Ø55 h6
Ø35 js6

Ø35 js6

20 13 1 16

130

page 07
WWW.ANC.SA
WWW.ANC.SA
 R

MatrialDetails
Matrial Details Cont.
Cont. Split-Case
Diesel Diesel
Split-Case

Model ANCSF 5-3x10 ANCSF 5-4x13 ANCSF 6-5x10

NO. Part No. Part Name Part No. Part Name Part No. Part Name
1 ANCSF125-80-250-0001 Lower Casing ANCSF125-100-300-0001 Lower Casing ANCSF150-125-250-0001 Lower Casing
2 ANCSF125-80-250-0002 Upper Casing ANCSF125-100-300-0002 Upper Casing ANCSF150-125-250-0002 Upper Casing
3 ANCSF125-80-250-0100 Rotor Assembly ANCSF125-100-300-0100 Rotor Assembly ANCSF150-125-250-0100 Rotor Assembly
4 ANCSF-207.00-ZZ-6307 Bearing – DE ANCSF-207.00-ZZ-6307 Bearing – DE ANCSF-207.00-ZZ-6307A Bearing – DE
5 ANCSF-307.00-ZZ-6307 Bearing – NDS ANCSF-307.00-ZZ-6307 Bearing – NDS ANCSF-307.00-ZZ-6307A Bearing – NDS
6 ANCSF-401.00-50B Packing Seal Assembly ANCSF-401.00-50B Packing Seal Assembly ANCSF-401.00-50B Packing Seal Assembly
7 ANCSF-700.00-AF Flushing Pipe ANCSF-700.00-AF Flushing Pipe ANCSF-700.00-AF Flushing Pipe
8 B2106-72A-131x146x18 Casing Wear Ring B2106-72A-131x146x25 Casing Wear Ring B2106-72A-160x175x22 Casing Wear Ring
9 TB125-125 TB125-125 TB125-125
10 DS-00 - M12x60 Jackscrew DS-00 - M12x60 Jackscrew DS-00 - M12x60 Jackscrew
11 GB/T3287 T8-1/2-Zn-D Plug NPT1/2 “ GB/T3287 T8-1/2-Zn-D Plug NPT1/2 “ GB/T3287 T8-1/2-Zn-D Plug NPT1/2 “
12 GB/T3287 T8-3/4-Zn-D Plug NPT3/4 “ GB/T3287 T8-3/4-Zn-D Plug NPT3/4 “ GB/T3287 T8-3/4-Zn-D Plug NPT3/4 “
13 GB/T5783 - M16x55 Hex Head Bolt GB/T5783 - M16x55 Hex Head Bolt GB/T5783 - M16x55 Hex Head Bolt
14 GB/T6170 - M12 Hexagon Nut GB/T6170 - M12 Hexagon Nut GB/T6170 - M12 Hexagon Nut
15 GB/T70.3 - M8x20 Screws GB/T70.3 - M8x20 Screws GB/T70.3 - M8x20 Screws
16 GB/T879.1 - 8x16 Electric Cylindrical Pin GB/T879.1 - 8x20 Electric Cylindrical Pin GB/T879.1 - 8x20 Electric Cylindrical Pin
17 GB/T881 - 12x100 Screw Tail Taper Pin GB/T881 - 12x100 Screw Tail Taper Pin GB/T881 - 12x100 Screw Tail Taper Pin
18 GB/T898 – AM20x65 Studs GB/T898 – AM20x65 Studs GB/T898 – AM20x65 Studs
19 GB/T923 – AM20 Cover Nut GB/T923 – AM20 Cover Nut GB/T923 – M20 Cover Nut
20 GB/T93 – 16 Spring Washers GB/T93 – 16 Spring Washers GB/T93 – 16 Spring Washers
21 GB/T97.1 – 20 Flat Washers GB/T97.1 – 20 Flat Washers GB/T97.1 – 20 Flat Washers
22 0.3 mm Split – Cases Gasket - Split – Cases Gasket - Split – Cases Gasket

page 08
WWW.ANC.SA WWW.ANC.SA
 R
R

+,-./0,%*("('1'23456789:;<'=763'>9?@A&'B@<75'2;A3'C'DE'>6FG9H5'7+

4500 12x10 FGSF12-10X20 121-222 1800 33

Dimention 4500 12x10 ANCSF12-10X20 Diesel

121-222Split-Case
1800 33
Dimention 5000 14x10 FGSF14-10X25
Split-Case Diesel
134-214 1480 30

5000 14x10 ANCSF14-10X25 134-214 1480 30

L M
K N

5000 16x14 FGSF16-14X25 127-194 1480 31

5000 16x14 ANCSF16-14X25 127-194 1480 31

5000 12x10 FGSF12-10X20 134-218 1800 33

A
T
5000 12x10 ANCSF12-10X20 134-218 1800 33
U
Ø55 h6
Ø35 js6

Ø35 js6
S

5500 16x14 FGSF16-14X25 124-192 1480 31

5500 16x14 ANCSF16-14X25 124-192 1480 31

B
J
6000 14x10 FGSF14-10X25 127-209 1480 30

C
6000 14x10 ANCSF14-10X25 127-209 1480 30
O
6000 16x14 FGSF16-14X25 120-190 1480 31
R

D
P
Q 6000 16x14 ANCSF16-14X25
E 120-190 1480 31
F

6500 14x10 FGSF14-10X25 205 1480 30

6500 14x10 ANCSF14-10X25 205 1480 30

Model ANCSF 5-3x10 ANCSF 5-4x13 ANCSF 6-5x10 ANCSF65006-5x13 16x14 6-5x16
ANCSF FGSF16-14X25 116-186
ANCSF 8-6x10 ANCSF 1480
8-6x13 31

DN 5/3 5/4 6/5 6/5

6500 6 / 5 ANCSF16-14X25 8 / 6116-186
16x14 8 /1480
6 31
A 280 310 320 340 380 340 360
7000 14x10 FGSF14-10X25
B 160 170 200 220 285 200 201 2301480 30

C 315 315 400 400

7000 14x10455 ANCSF14-10X25 400 201 4551480 30
D 120 260 260 320 420 300 320
7000 16x14
E 160 340 340 400 500 FGSF16-14X25 380 113-182 4001480 31

F 200 420 420 480

7000 16x14580 ANCSF16-14X25 460 113-182 4801480 31
J 170 170 200 220 220 200 230
7500 14x10 FGSF14-10X25 195 1480 30
L 250 290 300 350 350 300 350
M 330 330 350 400
7500 14x10500 ANCSF14-10X25 400 195 4151480 30
N 345 350.4 350.4 350.4 400 360.4 400
7500 16x14 FGSF16-14X25 109-179 1480 31
O 4x 20 4x 20 4x 20 4x 20 4x 25 4x 20 4x 25
K 434 438.5 448.5 448.5
7500 16x14520 ANCSF16-14X25448.5109-179 5201480 31
P 240 270 270 270 340 270 340
8000 16x14 FGSF16-14X25 117-192 1540 31
Q 290 320 320 320 390 320 390
R 30 30 30 30
8000 16x1430 ANCSF16-14X25 30 117-192 301540 31
Rotor 35h6 35h6 35h6 35h6 45h6 35h6 45h6
T 88 88 88 Fire pumps,88
multistage 88 88
U 75 75 75 75 75 75

all sizes are in cm unit. I55@AJ##7K/9<@6FA@3H5F6/HF?#34#@6F87<3L3MN!OO"P

page 09
WWW.ANC.SA
WWW.ANC.SA
 R

!"#$!#%$%!&'!()!*

+,-./0,%*("('1'23456789:;<'=763'>9?@A&'B@<75'2;A3'C'DE'>6FG9H5'7+ Rated Net Max Working !"#$!#%$%!&'!()!*

Rated Capacity Size No. of Pressure Range Approx Speed Pressure
(gpm) (in.) Model Dsg Stages (psi) (rpm) (psi)

750 8x6 FGSF8-6X18x2 2 263-361 1800 450

QXJY.EX28343 - Centrifugal Fire Pumps, Split

750 8x6 ANCSF8- 2 263-361 1800 450
6X18x2

1000 Case 8x6 FGSF8-6X18x2 2 253-354 1800 450

1000
Centrifugal
8x6 ANCSF8-
6X18x2
Fire2 Pumps,
253-354
Split Case
1800 450

See General
1250Information for8x6
Centrifugal Fire Pumps, Split Case
FGSF8-6X18x2 2 236-342 1800 450

1250GLOBAL LTD 8x6

FIREGUARD ANCSF8- 2 236-342 1800 450 EX28343
3 CHURCH ST 6X18x2
KIDDERMINSTER
1500
WORCESTERSHIRE, 8x62AD UNITED
DY10 FGSF8-6X18x2
KINGDOM 2 324 1800 450
Fire pumps, single stage
1500 8x6 ANCSF8- 2 324 1800 450
6X18x2
Rated Net Max Working
Rated Capacity Pressure Range Approx Speed Pressure
(gpm) Size (in.) Model Dsg (psi) (rpm) (psi)
Trademark and/or Tradename: , , "FIREGUARD GLOBAL"
2000 10x8 SCF250-200-350 123-239 2980 362
Last Updated on 2020-05-21
2500 10x8 SCF250-200-350 114-227 2980 362

Fire pumps, single stage

covered under UL's Follow-Up Service. Always look for the Mark on the product.
Rated Net Max Working
Rated Capacity Pressure Range Approx Speed Pressure
(gpm) Size (in.) Model Dsg (psi) (rpm) (psi)
entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from
300 5x3 ASF5-3X10 83-136 2950 280
reprinted material must include a copyright notice in the following format: "© 2021 UL LLC"
300 5x3 ASF5-3X10 120-196 3550 280

400 5x3 ASF5-3X10 82-135 2950 280

400 5x3 ASF5-3X10 120-196 3550 280

450 5x3 ASF5-3X10 80-134 2950 280

450 for5x3
more details about each
ASF5-3X10 119-196pumps certificate
3550 contact
280

500 5x3 ASF5-3X10 [email protected]

79-133 2950 280

500 5x3 ASF5-3X10 118 - 195 3550 280

750 5x3 ASF5-3X10 108 - 120 2950 280

750 5x3 ASF5-3X10 105-185 3550 280

750 8x6 ASF8-6X17 272-367 2950 460

>;:3'Q'F8'!$

I55@AJ##7K/9<@6FA@3H5F6/HF?#34#@6F87<3L3MN!OO"P >;:3'!'F8'!$

page 10
WWW.ANC.SA
 R
R

This section contains all information related to

End-Suction pumps of all types electric and
diesel.

page 11

SECTION 2
[email protected] www.anc.sa
END-SUCTION PUMPS
 R

INTRODUCTION
INTRODUCTION
ElectricEnd-Suction
Electric End-Suction

ANCULapproved
ANCUL approved firefire pumps
pumps are are ideally
ideally developed
developed and produced
and produced
either for small flows or high flows through well-designed
either for small flows or high flows through well-designed compact compact packages.
packages.
ANCUL-N
ANCUL -Nseries-End-Suction
series-End-Suction FireFire pumps
pumps havehave
back back pull
pull out out design
design for easyfor easy maintenance,
maintenance,
self-venting
self-venting center
center lineline discharge,
discharge, andNPSH
and low low NPSH requirements.
requirements. The pump Theconstruction
pump construction
is ductile iron body, bronze fitted with packing. The shaft and sleeves
is ductile iron body, bronze fitted with packing. The shaft and sleeves are in AISI316 are inStainless
AISI316 Stainless
steeland
steel andbebe supported
supported by thrust
by thrust ball bearings,
ball bearings, and roller
and radial radialbearing.
roller bearing.

MatrialDetails
Matrial Details
24 19 18 16,17 15 14 10,11,12,13

5
4

3
2

23 22 21 20

page 12
WWW.ANC.SA
WWW.ANC.SA
 R

Matrial Details
Matrial Details cont.
cont. Electric End-Suction
Electric End-Suction

Model ANCEF 40/26 ANCEF 50/26 ANCEF 65/26 ANCEF 80/26

DN 2 - 1/2 * 1 - 1/2 2 - 1/2 * 2 3 * 2 - 1/2 4*3
1 Vent plug - GB/T3287 - G1/2 Vent plug - GB/T3287 - G1/2 Vent plug - GB/T3287 - G1/2 Vent plug - GB/T3287 - G1/2
2 Casing - EF 40/26-0001 Casing - EF 50/26-0001 Casing - EF 65/26-0001 Casing - EF 80/26-0001
3 Casing wear ring - EF 40/26-0007 Casing wear ring - EF 50/26-0007 Casing wear ring - EF 65/26-0007 Casing wear ring - EF 80/26-0007
4 Impeller Nut - EF 40/26-0005 - M16 Impeller Nut - EF 50/26-0005 Impeller Nut - EF 65/26-0005 - M24 Impeller Nut - EF 80/26-0005 - M24
5 Washer - GB/T93 Washer - GB/T93 Washer - GB/T93 Washer - GB/T93
6 Impeller EF 40/26-0006 Impeller EF 50/26-0006 Impeller EF 65/26-0006 Impeller EF 80/26-0006
7 Casing cover - EF 40/26-0002 Casing cover - EF 50/20-0002 Casing cover - EF 65/26-0002 Casing cover - EF 80/26-0002
8 O-ring - GB/T3452.1-2005 O-ring -GB/T3452.1-2005 O-ring - GB/T3452.1-2005 O-ring - GB/T3452.1-2005
9 Double end studs EF 40/26-0013 Double end studs EF 50/26-0013 Double end studs EF 65/26-0013 Double end studs EF 80/26-0013
10 Packing sleeve GB/T5780 Packing sleeve GB/T5780 Packing sleeve GB/T5780 Packing sleeve GB/T5780

11 Packing gland - EF 40/26-0008 Packing gland - EF 50/26-0008 Packing gland - EF 65/26-0008 Packing gland - EF 80/26-0008

12 Packing-GB/T16605-2008 - 7x7x150 Packing- GB/T16605-2008 - 6x6x200 Packing- GB/T16605-2008 - 7x7x250 Packing-GB/T16605-2008 - 7x7x250

13 Packing ring - EF 40/26-0009 Packing ring - EF 50/26-0009 Packing ring - EF 65/26-0009 Packing ring - EF 80/26-0009

14 Double end studs M10x55 Double end studs M10x35 Double end studs - GP/T70.3 M12x35 Double end studs - GP/T70.3 -M12x35

15 Water-proof ring DS-00 Water-proof ring DS-00 Water-proof ring DS-00 Water-proof ring DS-00

16 Bearing cover EF 40/26-0012 Bearing cover EF 50/26-0012 Bearing cover EF 65/26-0012 Bearing cover EF 80/26-0012

17 Oil Seal DS-00 Oil Seal DS-00 Oil Seal DS-00 Oil Seal DS-00

18 Bearing GB/T276-1994 SKF7307 Bearing GB/T276-1994 SKF7307 Bearing GB/T276-1994 SKF7308 Bearing GB/T276-1994 SKF7309

19 Bearing GB/T276-1994 SKF7306 Bearing GB/T276-1994 SKF7306 Bearing GB/T276-1994 SKF7307 Bearing GB/T276-1994 SKF7308

20 Double end studs-GB/T70.3- M10x60 Double end studs-GB/T70.3- M10x60 Double end studs-GB/T70.3- M10x75 Double end studs-GB/T70.3- M10x75

21 Bearing Housing EF 40/26-0010 Bearing Housing EF 50/26-0010 Bearing Housing EF 65/26-0010 Bearing Housing EF 80/26-0010

22 Shaft EF 40/26-0003 Shaft EF 50/26-0003 Shaft EF 65/26-0003 Shaft EF 80/26-0003

23 Bearing Bracket EF 40/26-0011 Bearing Bracket EF 50/26-0011 Bearing Bracket EF 65/26-0011 Bearing Bracket EF 80/26-0011

24 Grease nozzle-JB/T7940.1-1995-M6x1 Grease nozzle-JB/T7940.1-1995-M6x1 Grease nozzle-JB/T7940.1-1995-M6x1 Grease nozzle-JB/T7940.1-1995-M6x1

page 13
WWW.ANC.SA
 R

Electric End-Suction

Dimention

d1
d2

a1
X Y
Z
A

a2
c2 c1 b2 b1

Model ANCEF 40/20 ANCEF 50/20 ANCEF 65/20 ANCEF 80/20

DN    
a1    
a2    
b1    
b2    
c1    
c2    
d1    
d2    
A    
X    
Y    
Z    

all sizes are in cm unit.

page 14
WWW.ANC.SA
 R

INTRODUCTION Diesel End-Suction

ANCUL fire pumps are being directly connected through flexible coupling to the
INTRODUCTION Diesel End-Suction
engines manufactured by Clarke or NM and Kirloskar. All our approved pumps are having
UL Listed,
ANCUL FM
fire Approved
pumps engines
are being with connected
directly granted and guaranteed
through flexiblecontinuous
coupling topower
the ratings.
The diesel
engines engines conform
manufactured to the
by Clarke or requirements of NFPA
NM and Kirloskar. 20 and
All our specifically
approved pumpsapproved
are havingfor
fire
UL pump
Listed,application
FM Approvedand engines
service.with
Diesel engines
granted andoperate at a continuous
guaranteed rated speedpower
not exceeding
ratings. the
The diesel
above RPMengines conform
and develop to the requirements
sufficient horsepower toof NFPA 20 pump
drive the and specifically approved
with reserve power.for
fire pump application and service. Diesel engines operate at a rated speed not exceeding the
above RPM and develop sufficient horsepower to drive the pump with reserve power.

Matrial Details
Matrial Details
24 19 18 16,17 15 14 10,11,12,13

5
4

3
2

23 22 21 20

page 15
WWW.ANC.SA
WWW.ANC.SA
 R

Matrial Details cont. Diesel End-Suction

Matrial Details Cont. Diesel End-Suction

Model ANCEF 40/26 ANCEF 50/26 ANCEF 65/26 ANCEF 80/26

DN 2 - 1/2 * 1 - 1/2 2 - 1/2 * 2 3 * 2 - 1/2 4*3
1 Vent plug - GB/T3287 - G1/2 Vent plug - GB/T3287 - G1/2 Vent plug - GB/T3287 - G1/2 Vent plug - GB/T3287 - G1/2
2 Casing - EF 40/26-0001 Casing - EF 50/26-0001 Casing - EF 65/26-0001 Casing - EF 80/26-0001
3 Casing wear ring - EF 40/26-0007 Casing wear ring - EF 50/26-0007 Casing wear ring - EF 65/26-0007 Casing wear ring - EF 80/26-0007
4 Impeller Nut - EF 40/26-0005 - M16 Impeller Nut - EF 50/26-0005 Impeller Nut - EF 65/26-0005 - M24 Impeller Nut - EF 80/26-0005 - M24
5 Washer - GB/T93 Washer - GB/T93 Washer - GB/T93 Washer - GB/T93
6 Impeller EF 40/26-0006 Impeller EF 50/26-0006 Impeller EF 65/26-0006 Impeller EF 80/26-0006
7 Casing cover - EF 40/26-0002 Casing cover - EF 50/20-0002 Casing cover - EF 65/26-0002 Casing cover - EF 80/26-0002
8 O-ring - GB/T3452.1-2005 O-ring -GB/T3452.1-2005 O-ring - GB/T3452.1-2005 O-ring - GB/T3452.1-2005
9 Double end studs EF 40/26-0013 Double end studs EF 50/26-0013 Double end studs EF 65/26-0013 Double end studs EF 80/26-0013
10 Packing sleeve GB/T5780 Packing sleeve GB/T5780 Packing sleeve GB/T5780 Packing sleeve GB/T5780

11 Packing gland - EF 40/26-0008 Packing gland - EF 50/26-0008 Packing gland - EF 65/26-0008 Packing gland - EF 80/26-0008

12 Packing-GB/T16605-2008 - 7x7x150 Packing- GB/T16605-2008 - 6x6x200 Packing- GB/T16605-2008 - 7x7x250 Packing-GB/T16605-2008 - 7x7x250

13 Packing ring - EF 40/26-0009 Packing ring - EF 50/26-0009 Packing ring - EF 65/26-0009 Packing ring - EF 80/26-0009

14 Double end studs M10x55 Double end studs M10x35 Double end studs - GP/T70.3 M12x35 Double end studs - GP/T70.3 -M12x35

15 Water-proof ring DS-00 Water-proof ring DS-00 Water-proof ring DS-00 Water-proof ring DS-00

16 Bearing cover EF 40/26-0012 Bearing cover EF 50/26-0012 Bearing cover EF 65/26-0012 Bearing cover EF 80/26-0012

17 Oil Seal DS-00 Oil Seal DS-00 Oil Seal DS-00 Oil Seal DS-00

18 Bearing GB/T276-1994 SKF7307 Bearing GB/T276-1994 SKF7307 Bearing GB/T276-1994 SKF7308 Bearing GB/T276-1994 SKF7309

19 Bearing GB/T276-1994 SKF7306 Bearing GB/T276-1994 SKF7306 Bearing GB/T276-1994 SKF7307 Bearing GB/T276-1994 SKF7308

20 Double end studs-GB/T70.3- M10x60 Double end studs-GB/T70.3- M10x60 Double end studs-GB/T70.3- M10x75 Double end studs-GB/T70.3- M10x75

21 Bearing Housing EF 40/26-0010 Bearing Housing EF 50/26-0010 Bearing Housing EF 65/26-0010 Bearing Housing EF 80/26-0010

22 Shaft EF 40/26-0003 Shaft EF 50/26-0003 Shaft EF 65/26-0003 Shaft EF 80/26-0003

23 Bearing Bracket EF 40/26-0011 Bearing Bracket EF 50/26-0011 Bearing Bracket EF 65/26-0011 Bearing Bracket EF 80/26-0011

24 Grease nozzle-JB/T7940.1-1995-M6x1 Grease nozzle-JB/T7940.1-1995-M6x1 Grease nozzle-JB/T7940.1-1995-M6x1 Grease nozzle-JB/T7940.1-1995-M6x1

page 16
WWW.ANC.SA
WWW.ANC.SA
 R

Diesel End-Suction

Dimention

d1
d2

a1
X Y
Z
A

a2
c2 c1 b2 b1

b2 + c1 + c2

Model ANCEF 40/26 ANCEF 50/26 ANCEF 65/26 ANCEF 80/26

DN 2 - 1/2 * 1 - 1/2 2 - 1/2 * 2 3 * 2 - 1/2 4*3
a1    
a2    
b1    
b2    
c1   
 50.50
c2    
d1    
d2    
A    
X    
Y    
Z    
all sizes are in cm unit.

page 17
WWW.ANC.SA
 +,-./01%$232'4'56789:;<=>?'@:96'A<BCD&'07E'F<G8:H7'I'.J'A9HE<G8':+ !"#"$#%"%!&'!!()*

500 4x3 ANCEF 80/20 90-100 2980 232

750 4x3 FGEF 80/20 87-98 2980 232

750 4x3 ANCEF 80/20 87-98 2980 232

500 4x3
+,-./01%$232'4'56789:;<=>?'@:96'A<BCD&'07E'F<G8:H7'I'.J'A9HE<G8':+ FGEF 80/20 129-142 3550 232 !"#"$#%"%!&'!!()*

500 4x3 ANCEF 80/20 129-142 3550 232

750 4x3 FGEF 80/20 127-142 3550 232

QWZU.EX28373
750 4x3
- Centrifugal
ANCEF 80/20
Fire Pumps,
127-142 3550
End
232

Suction
50 2-1/2x1-1/2 FGEF 40/20 76-111 2980 232

50 2-1/2x1-1/2 ANCEF 40/20 76-111 2980 232

100
Centrifugal
2-1/2x1-1/2
Fire Pumps, End
FGEF 40/20
Suction
72-109 2980 232

See General100
Information for 2-1/2x1-1/2
Centrifugal Fire Pumps,ANCEF
End Suction
40/20 72-109 2980 232

FIRE PUMP, THREE

FIREGUARD GLOBALPHASE
50 MOTORS
LTD 2-1/2x1-1/2 FGEF 40/20 108-157 3550 232 EX28373
ODP, RIGID3BASE,
CHURCH STEPACT MOTORS
50 2-1/2x1-1/2 ANCEF 40/20 108-157 3550 232
KIDDERMINSTER
WORCESTERSHIRE, DY10 2AD UNITED KINGDOM
100 2-1/2x1-1/2 FGEF 40/20 105-157 3550 232
APPLICATIONS: Rated Net Max
Rated
100 for fire pump
For use on pumps designed 2-1/2x1-1/2 ANCEFper
duty and installed 40/20 Pressure
dripproofApprox
105-157
NFPA-20. These 3550 Working
232
motors are intended forCapacity Size
installation in relatively Model
clean and dry environments. Range Speed Pressure
Fire Pump motors are not100
GPMrecommended2-1/2x1-1/2
In. for use withFGEF 40/26 frequency
Dsg
variable 100-138
psi
drives. 2980
RPM 232
psi

200 100 2-1/2x2

2-1/2x1-1/2 FGEF 50/2640/26
ANCEF 105-140
100-138 2980
2980 232 232
FEATURES:
• UL file EX5190, CSA 200
file LR20252-1/2x2
and CE mark ANCEF 50/26 105-140 2980 232
• 50° C ambient
250 2-1/2x2 FGEF 50/26 99-136 2980 232
• Ball bearings Trademark and/or Tradename: , "FIREGUARD" , "FIREGUARD
• Single GLOBAL" ,
voltage motors have 12 leads and are suitable for
• 1.15 service factor (except
250 as noted)
2-1/2x2 ANCEF 50/26 wye-delta, across
99-136 2980 232
• Red paint on 25 HP through 250 HP the line, or part winding startLast Updated on 2020-05-21
250 3x2-1/2 FGEF 65/26 • Will accept 119-147
C-Face kits2980
(except as 239
noted), see accessories
• NEMA® design B, code G or less
section for kits
• Dual voltage motors250 have 12 leads, suitable for
3x2-1/2 ANCEF 65/26 119-147 2980 239
wye-delta or across the line start on either voltage, • 230/460 and 460 Volt models rated for 50 HZ at next lower
or part winding start on
300 lowUL's
voltage
3x2-1/2 FGEF 65/26 HP, 1.15 119-147
SF, as noted 2980 239
covered under Follow-Up Service. Always look for the Mark on the product.

300 3x2-1/2 ANCEF 65/26 119-147 2980 239

STOCK

CAT. MODEL LIST MULT. NOM. F.L. “C” FOOT

HP RPM VOLTS FRAME WT.
entirety NO. manner, without
400and in a non-misleading
3x2-1/2 FGEF
NO. manipulation of PRICE
any65/26 (orSYMB.
119-141
the data drawings).EFF.
2. 2980 AMPS
The statement 239
"Reprinted from DIM. NOTES

25 3600 200/400 256T U501 256TTDX4020 $2,789 E8 91.0 66.5/33.5 126 22.32
reprinted
400 material must3x2-1/2
include a copyright notice in the
ANCEF following format: 119-141
65/26 "© 2021 UL LLC" 2980 239
3600 190/380-400 256T U501A 256TTDBD4020 √ $2,789 E8 91.0 70.0/35.0-33.5 284 24.22
3600 230/460 256T U500 256TTDX4024 √ $2,789 E8 91.0 58.0/29.0 164 22.32 d, 68
450 3x2-1/2 FGEF 65/26 114-138 2980 239
3600 230/460 256T U500A 256TTDBD4024 √ $2,789 E8 91.0 58.0/29.0 274 24.22 68
3600 575 256T U1100 256TTDBD4008 √ $2,789 E8 91.0 23.2 274 24.22
450 3x2-1/2 ANCEF 65/26 114-138 2980 239
1800 200/400 284T U503 284TTDP4047 $2,762 E8 91.7 70.0/35.0 412 23.49
1800 190/380-400 284T U599 284TTDBD4047 √ $2,762 E8 91.7 74.0/36.5-34.5 378 25.71
500 3x2-1/2 FGEF 65/26 111-135 2980 239
1800 230/460 284T U502 284TTDP4027 $2,762 E8 91.7 61.0/30.5 423 23.49 68
1800 230/460 284T U598 284TTDBD4027 √ $2,762 E8 91.7 Cookies Settings
61.0/30.5 378 25.71 68
1800
Cookies
575
500 on 3x2-1/2
284T forU1101
more details
ANCEF 65/26
about each
284TTDBD4035 √ pumps
111-135
$2,762 certificate
E8
2980
contact 24.4
91.7
239
378 25.71
30 3600 UL 230/460 284TS4x3 U504 284TSTDP4002 √ $3,328
116-138E8 91.0
2980 72.0/36.0 432 22.06 d, 68
500
3600K88CDL##:M/<?C9HDC6G8H9/GHB#67#C9H;:?6N6OP!P$Q"
230/460 284TS U597 284TSTDBD4002 [email protected]
FGEF 80/26
√ $3,328 E8 91.0
232
72.0/36.0
Accept All 399 24.34A>=6'2'H;'268
3600 We200/400
use cookies to
500
personalize
284TS 4x3 U505
content and ads, to provide social
284TSTDP14007
ANCEF 80/26
media E8
$3,328
116-138 91.0
2980 83.0/41.5
Cookies
232 324 22.06 68
3600 features
190/380-400 284TS our
and to analyze U596
tra c.284TSTDBD4007
We also share information√ $3,328
about yourE8 91.0 87.0/43.5-41 374 24.34
3600 use of575 our 284TS
750 site with our4x3U1103
social media,284TSTDBD4008
advertising √
and analytics
FGEF 80/26 $3,328
105-132E8 91.0
2980 28.8232 374 24.34
1800 200/400 286T U507 286TTDP14042 $3,213 E8 92.4 83.0/41.5 296 24.99
partners. Learn more
1800 190/380-400750 286T 4x3 U595 286TTDBD14042
ANCEF 80/26 √ $3,213
105-132E8 92.4
2980 87.0/43.0-41.0
232 426 27.09
1800 230/460 286T U506 286TTDP4041 $3,213 E8 92.4 72.0/36.0 331 24.99 68
1800 230/460 286T U594 286TTDBD4041 √ $3,213 E8 92.4 72.0/36.0 424 27.09 68
1800 575 286T U1104
K88CDL##:M/<?C9HDC6G8H9/GHB#67#C9H;:?6N6OP!P$Q" 286TTDBD4035 √ $3,213 E8 92.4 28.8 424 27.09
A>=6'!'H;'2

40 3600 200/400 286TS U509 286TSTDP4023 √ $4,259 E8 91.7 108/54.0 327 23.56 d
3600 190/380-400 286TS U593 286TSTDBD4023 √ $4,259 E8 91.7 114/57.0-54.0 419 25.72
3600 230/460 286TS U508 286TSTDP4022 √ $4,259 E8 91.7 94.0/47.0 360 23.56 d, 68
3600 230/460 286TS U592 286TSTDBD4022 √ $4,259 E8 91.7 94.0/47.0 421 25.72 68
3600 575 286TS U1106 286TSTDBD4008 √ $4,259 E8 91.7 37.5 421 25.72
page 18
1800 200/400
1800 190/380-400 324T
324T U511
U511A
324TTDP14049
324TTDCD14049
√
√
$3,996
$3,996
E8
E8
93.0
93.0
155/77.5
114/56.5-53.5
431
272
26.00
28.55
d

1800 230/460 324T U510 324TTDP4038 √ $3,996 E8 93.0 97.0/48.5 465 26.00 d, 68
WWW.ANC.SA
1800 230/460 324T U510A 324TTDCD4038 √ $3,996 E8 93.0 94.0/47.0 272 28.55 68
1800 575 324T U1107 324TTDCD4035 √ $3,996 E8 93.0 37.5 272 28.55
 R

This chapter contains all information related to inline

jockey pump includes technical data, matrial descrip-
tion and dimentions.

page 19

CHAPTER 2
[email protected] www.anc.sa JOCKEY PUMPS
 R

page 20
WWW.ANC.SA
 R

TECHNICAL DATA

page 21
WWW.ANC.SA
 R

MATERIAL DESCRIPTION

page 22
WWW.ANC.SA
 R

DIMENSIONS AND WEIGHT

page 23
WWW.ANC.SA
 R

FIRE PUMP, THREE PHASE MOTORS

ODP, RIGID BASE, EPACT MOTORS

APPLICATIONS:
For use on pumps designed for fire pump duty and installed per NFPA-20. These
motors are intended for installation in relatively clean and dry environments.
Fire Pump motors are not recommended for use with variable frequency dr

FEATURES:
• UL file EX5190, CSA file LR2025 and CE mark
• 50° C ambient
• Ball bearings • Single voltage
• 1.15 service factor (except as noted) wye-delta, acro
• Red paint on 25 HP through 250 HP the line, or par
• NEMA® design B, code G or less • Will accept C-F
section for kits
• Dual voltage motors have 12 leads, suitable for
wye-delta or across the line start on either voltage, • 230/460 and 46
or part winding start on low voltage HP, 1.15 SF, as

STOCK
CAT. MODEL LIST MU
HP RPM VOLTS FRAME
NO. NO. PRICE SYM

25 3600 200/400 256T U501 256TTDX4020 $2,789 E

3600 190/380-400 256T U501A 256TTDBD4020 √ $2,789 E
3600 230/460 256T U500 256TTDX4024 √ $2,789 E
3600 230/460 256T U500A 256TTDBD4024 √ $2,789 E
3600 575 256T U1100 256TTDBD4008 √ $2,789 E
1800 200/400 284T U503 284TTDP4047 $2,762 E
1800 190/380-400 284T U599 284TTDBD4047 √ $2,762 E
1800 230/460 284T U502 284TTDP4027 $2,762 E
1800 230/460 284T U598 284TTDBD4027 √ $2,762 E
1800 575 284T U1101 284TTDBD4035 √ $2,762 E
30 3600 230/460 284TS U504 284TSTDP4002 √ $3,328 E
3600 230/460 284TS U597 284TSTDBD4002 √ $3,328 E
3600 200/400 284TS U505 284TSTDP14007 $3,328 E
3600 190/380-400 284TS U596 284TSTDBD4007 √ $3,328 E
3600 575 284TS U1103 284TSTDBD4008 √ $3,328 E
1800 200/400 286T U507 286TTDP14042 $3,213 E
1800 190/380-400 286T U595 286TTDBD14042 √ $3,213 E
1800 230/460 286T U506 286TTDP4041 $3,213 E
1800 230/460 286T U594 286TTDBD4041 √ $3,213 E
page 24 1800 575 286T U1104 286TTDBD4035 √ $3,213 E
40 3600 200/400 286TS U509 286TSTDP4023 √ $4,259 E
WWW.ANC.SA 3600 190/380-400 286TS U593 286TSTDBD4023 √ $4,259 E
3600 230/460 286TS U508 286TSTDP4022 √ $4,259 E
 R

pproof
FIRE PUMP, THREE PHASE MOTORS
ODP, RIGID BASE, EPACT MOTORS
s.

APPLICATIONS:
For use on pumps designed for fire pump duty and installed per NF
tors have 12 leadsmotors are intended
and are suitable for for installation in relatively clean and dry enviro
This chapter contains all information related to
Fire Pump motors are not recommended for use with variable f
inding startfirepump motors of all types MARATHON and
e kits (except as noted), see
TECHTOP, accessories
including details and features.
FEATURES:
• 50
Volt models rated for ULHZfile EX5190,
at next lower CSA file LR2025 and CE mark
ed
• 50° C ambient
• Ball bearings • S
NOM.
EFF.
F.L.
AMPS • 1.15 service
WT.
“C”
DIM.
FOOT
factor (except as noted)
NOTES
w
th
91.0 66.5/33.5• Red 126 paint
22.32 on 25 HP through 250 HP
91.0 70.0/35.0-33.5
• NEMA284 24.22
®
design B, code G or less • W
91.0 58.0/29.0 164 22.32 d, 68 s
91.0 58.0/29.0• Dual274 voltage
24.22 motors
68 have 12 leads, suitable for
91.0 23.2 wye-delta
274 24.22 or across the line start on either voltage, • 2
91.7 70.0/35.0 412 23.49 H
91.7 74.0/36.5-34.5 or378
part25.71
winding start on low voltage
91.7 61.0/30.5 423 23.49 68
91.7 61.0/30.5 378 25.71 68 STOCK
91.7 24.4 378 25.71 CAT.
HP RPM d, 68 VOLTS FRAME MODEL
91.0 72.0/36.0 432 22.06
91.0 72.0/36.0 399 24.34 68
NO. page
NO. 25
91.0 83.0/41.5 25 324 22.06
3600 68 200/400 256T U501 256TTDX4020
91.0
91.0
92.4
87.0/43.5-41
28.8
83.0/41.5
374
374
296
24.34
3600 190/380-400 256T
24.34
3600
24.99 230/460 256T
CHAPTER3
U501A
U500
256TTDBD4020
256TTDX4024
√
√

MOTORS
92.4 87.0/43.0-41.0 426 3600
27.09 230/460 256T U500A 256TTDBD4024 √
92.4 72.0/36.0 331 24.99
3600 68 575
[email protected] www.anc.sa 256T U1100 256TTDBD4008 √
92.4 72.0/36.0 424 27.09 68
92.4 28.8 424
1800
27.09
200/400 284T U503 284TTDP4047
91.7 108/54.0 327 1800 d190/380-400 284T
23.56 U599 284TTDBD4047 √
91.7 114/57.0-54.0 419 1800
25.72 230/460 284T U502 284TTDP4027
91.7 94.0/47.0 360 23.56 d, 68
 R
R

A-20. These dripproof

ments.
equency drives.

This section contains all information related to Marthon fire

gle voltage pump
motors haveincluding
motor, 12 leads and are suitable
applcations, for and features.
details
e-delta, across
line, or part winding start
l accept C-Face kits (except as noted), see accessories
tion for kits
/460 and 460 Volt models rated for 50 HZ at next lower
1.15 SF, as noted

LIST MULT. NOM. F.L. “C” FOOT

PRICE SYMB. EFF. AMPS
WT.
DIM. NOTES page 26
® MODELS
$2,789 E8 91.0 66.5/33.5
JU4H-UF14 JU4H-UFAB26126
JU4H-UF12 JU4H-UF22 JU4H-UF30
22.32
JU4H-UFH8 JU4H-UF40 JU4H-UF50

SECTION 1
JU4H-UF32 JU4H-UFH0 JU4H-UF42 JU4H-UF52
FIRE PUMP ENGINES JU4H-UF10 JU4H-UF20 JU4H-UF24 JU4H-UF34 JU4H-UFH2 JU4H-UF58 JU4H-UF54
$2,789 ENGINEE8EQUIPMENT
91.0 70.0/35.0-33.5 284 24.22
$2,789 EQUIPMENT
E8 91.0
STANDARD 58.0/29.0 164
OPTIONAL 22.32 d, 68
Air Cleaner

MARTHON MOTORS
Direct Mounted, Washable, Indoor Service with Drip Shield Disposable, Drip Proof, Indoor Service Outdoor Type, Single or
$2,789 E8 91.0 58.0/29.0 274 Two Stage
24.22 68
[email protected] www.anc.sa
Alternator 12V-DC, 42 Amps with Poly-Vee Belt and Guard 24V-DC, 40 Amps with Poly-Vee Belt and Guard

$2,789 E8 91.0
Exhaust Protection
23.2 274
Blankets on UF10/12/14/20/22/AB26/24;
Metal Guards on Manifolds and Turbocharger on
24.22
$2,762 E8 91.7 70.0/35.0 412 23.49
UF30/32/34/H8/H0/H2/40/42/58/50/52/54
Coupling Bare Flywheel Listed Driveshaft and Guard, UF10/12/14, UF20/22/AB26/24 –
CDS10-SC; UF30/32/34, UFH8/H0/H2, UF40/42 – CDS20-SC;

$2,762 E8 91.7 74.0/36.5-34.5 378

Exhaust Flex Connection For NA Engines - Stainless Steel Flex, NPT(M) Connection, 3”
25.71
UF58/50/52/54 – CDS30-S1
For NA Engines – Stainless Steel Flex, NPT(M) Connection, 4”

$2,762 E8 91.7 61.0/30.5 423

For T Engines – Stainless Steel Flex, NPT(M) Connection, 4”
23.49 68
For T Engines - Stainless Steel Flex, 150# ANSI Flanged
Connection, 5”
Flywheel Housing SAE #3
 3600 230/460 324TS U512A 324TSTDCD4010 √ $5,062 E8 92.4 114/57.0 252 27.05 68

PUMP MOTORS
3600 575 324TS U1109 324TSTDCD4008 √ $5,062 E8 92.4 45.5 252 27.05
1800 200/400 326T U515 326TTDP4344 $4,657 E8 93.0 141/70.5 498 27.50
1800 190/380-400 326T U515A 326TTDCD4344 √ $4,657 E8 93.0 145/72.0-68.5 324 29.73
1800 230/460 326T U514 326TTDP4345 $4,657 E8 93.0 123/61.5 515 27.50 68
1800 R
230/460 326T U514A 326TTDCD4345 √ $4,657 E8 93.0 120/60.0 324 29.73 68
1800 575 326T U1110 326TTDCD4035 √ $4,657 E8 93.0 48.0 324 29.73
Catalog numbers (Cat No.) highlighted in Blue shaded areas are cast iron frames. Continued on next page.
bold blue are EPAct efficient.

NEMA is a trademark of National Electrical Manufacturers Association.

All Rights Reserved.

Prices and specifications are subject to change without notice. 161

FIRE PUMP, THREE
FIRE PUMP,
FIRE
PHASE
PUMP,
THREE
MOTORS
THREE
PHASE
PHASE
MOTORS
MOTORS
ODP, RIGID BASE,
ODP EPACT
, RIGID
ODP,MOTORS
RIGID
BASE,BASE,
EPACTEPACT
MOTORS
MOTORS

APPLICATIONS: APPLICATIONS:
APPLICATIONS:
For use on pumps designed
For use for
on
Forpumps
fire
usepump
ondesigned
pumps
duty and
designed
forinstalled
fire pump
for per
fire
duty
NFPA-20.
pump andduty
installed
These
and installed
dripproof
per NFPA-20.
per NFPA-20.
These dripproof
These dripproof
motors are intended motors
for installation
are
motors
intended
inare
relatively
intended
for installation
clean
for installation
andindry
relatively
environments.
in relatively
clean andclean
dry environments.
and dry environments.
Fire Pump motors areFirenot
Pump
recommended
Firemotors
Pump motors
are for
notuse
recommended
are with
not recommended
variable for
frequency
use with
for use
drives.
variable
with variable
frequency
frequency
drives. drives.

FEATURES: FEATURES:
FEATURES:
• UL file EX5190, CSA • UL
file file
LR2025
•EX5190,
UL file
andEX5190,
CSA
CE mark
file CSA
LR2025file LR2025
and CE mark
and CE mark
• 50° C ambient • 50° C •ambient
50° C ambient
• Ball bearings • Ball bearings
• Ball bearings • Single voltage motors• Single
have•voltage
12Single
leadsmotors
voltage
and arehave
motors
suitable
12 have
leads
for 12
and
leads
are suitable
and are suitable
for for
• 1.15 service factor •(except
1.15 service
•as1.15
noted)
factor
service
(except
factor as(except
noted)as noted)wye-delta, across wye-delta, wye-delta,
across across
• Red paint on 25 HP• through
Red paint• 250
RedonHP
paint
25 HPonthrough
25 HP through
250 HP 250 HP the line, or part winding
the start
line, the
or part
line,winding
or part winding
start start
• NEMA® design B, code• NEMA G or •® less
design®B,
NEMA design
code G B, or lessG or less• Will accept C-Face•kits
code Will
(except
accept
• WillasC-Face
accept
noted),
kits
C-Face
see
(except
accessories
kits as
(except
noted),
assee
noted),
accessories
see accessories
section for kits section forsection
kits for kits
• Dual voltage motors • Dual
have voltage
12
• Dual
leads,
motors
voltage
suitable
have
motors
for12 have
leads,12suitable
leads, suitable
for for
wye-delta or across thewye-delta
line start
wye-delta
or on
across
either
orthe
across
voltage,
line start
the line
on start• on
either 230/460
voltage, and 460 Volt
either voltage, • 230/460
models • 230/460
and
rated 460
forand
Volt
50 HZ
460
models
at
Volt
next
rated
models
lower
forrated
50 HZforat50
next
HZlower
at next lower
or part winding start or
onpart
low winding
voltage
or part winding
start on start
low voltage
on low voltage HP, 1.15 SF, as noted HP, 1.15 HPSF,, as
1.15
noted
SF, as noted
STOCK

STOCK

STOCK
CAT. CAT.
MODEL FRAME CAT.LIST
MODEL MULT.
MODELNOM. LIST F.L.
MULT.
LIST NOM.
MULT. “C”
NOM.F.L. FOOTF.L. “C” FOOT
“C” FOOT
HP RPM VOLTS
HP FRAME
RPM
HP RPM
VOLTS VOLTS
FRAME WT. WT. WT.
NO. NO. NO. NO.
PRICENO. SYMB.
NO. EFF. PRICE AMPS
SYMB.
PRICE SYMB.
EFF. DIM.
EFF.
AMPSNOTESAMPS DIM. NOTES
DIM. NOTES

25 3600 200/400
25 3600
256T
25 3600
200/400 200/400
U501 256TTDX4020
256T 256T
U501 256TTDX4020
U501$2,789 256TTDX4020
E8 91.0 $2,78966.5/33.5
$2,789
E8 91.0
126
E8 22.32
91.0
66.5/33.5 66.5/33.5126 22.32 126 22.32
3600 190/380-400 3600
256T 190/380-400
3600 190/380-400
U501A 256TTDBD4020
256T 256T
U501A √U501A
256TTDBD4020
$2,789 256TTDBD4020
E8 √
91.0 $2,789
70.0/35.0-33.5
√ $2,789
E8 91.0
284
E8 70.0/35.0-33.5
24.22
91.0 70.0/35.0-33.5 284 24.22 284 24.22
3600 230/460 3600
256T 3600
230/460 230/460
U500 256TTDX4024
256T 256T
U500 √ U500
256TTDX4024
$2,789 256TTDX4024
E8 √
91.0 $2,789
√58.0/29.0
$2,789
E8 91.0
164
E8 22.32
91.0
58.0/29.0 d,58.0/29.0
68 164 22.32 164 22.32
d, 68 d, 68
3600 230/460 3600
256T 3600
230/460 230/460
U500A 256TTDBD4024
256T 256T
U500A √U500A
256TTDBD4024
$2,789 256TTDBD4024
E8 √
91.0 $2,789
√58.0/29.0
$2,789
E8 91.0
274
E8 24.22
91.0
58.0/29.0 6858.0/29.0
274 24.22 274 24.22
68 68
3600 575 3600
256T 3600
575
U1100 256TTDBD4008
575
256T 256T
U1100 √U1100
256TTDBD4008
$2,789 256TTDBD4008
E8 √
91.0 $2,789
√ 23.2$2,789
E8 91.0
274
E8 24.22
91.023.2 23.2274 24.22 274 24.22
1800 200/400 284T
1800 1800
200/400 200/400
U503 284TTDP4047
284T 284T
U503 284TTDP4047
U503$2,762 284TTDP4047
E8 91.7 $2,76270.0/35.0
$2,762
E8 91.7
412
E8 23.49
91.7
70.0/35.0 70.0/35.0412 23.49 412 23.49
1800 190/380-400 284T
1800 190/380-400
1800 190/380-400
U599 284TTDBD4047
284T 284T
U599 √ U599
284TTDBD4047
$2,762 284TTDBD4047
E8 √
91.7 $2,762
74.0/36.5-34.5
√ $2,762
E8 91.7
378
E8 25.71
74.0/36.5-34.5
91.7 74.0/36.5-34.5 378 25.71 378 25.71
1800 230/460 284T
1800 1800
230/460 230/460
U502 284TTDP4027
284T 284T
U502 284TTDP4027
U502$2,762 284TTDP4027
E8 91.7 $2,76261.0/30.5
$2,762
E8 91.7
423
E8 23.49
91.7
61.0/30.5 6861.0/30.5
423 23.49 423 23.49
68 68
1800 230/460 284T
1800 1800
230/460 230/460
U598 284TTDBD4027
284T 284T
U598 √ U598
284TTDBD4027
$2,762 284TTDBD4027
E8 √
91.7 $2,762
√61.0/30.5
$2,762
E8 91.7
378
E8 25.71
91.7
61.0/30.5 6861.0/30.5
378 25.71 378 25.71
68 68
1800 575 284T
1800 1800
575
U1101 284TTDBD4035
575
284T 284T
U1101 √ U1101
284TTDBD4035
$2,762 284TTDBD4035
E8 √
91.7 $2,762
√ 24.4$2,762
E8 91.7
378
E8 25.71
91.724.4 24.4378 25.71 378 25.71
30 3600 230/460
30 284TS
3600
30 3600
230/460 230/460
U504 284TSTDP4002
284TS 284TS
U504 √ U504
284TSTDP4002
$3,328 284TSTDP4002
E8 √
91.0 $3,328
√72.0/36.0
$3,328
E8 91.0
432
E8 22.06
91.0
72.0/36.0 d,72.0/36.0
68 432 22.06 432 22.06
d, 68 d, 68
3600 230/460 284TS
3600 3600
230/460 284TSTDBD4002
U597 230/460
284TS 284TS
U597 √ U597
284TSTDBD4002
$3,328 284TSTDBD4002
E8 √
91.0 $3,328
√72.0/36.0
$3,328
E8 91.0
399
E8 24.34
91.0
72.0/36.0 6872.0/36.0
399 24.34 399 24.34
68 68
3600 200/400 284TS
3600 3600
200/400 284TSTDP14007
U505 200/400
284TS 284TS
U505 284TSTDP14007
U505$3,328 284TSTDP14007
E8 91.0 $3,32883.0/41.5
$3,328
E8 91.0
324
E8 22.06
91.0
83.0/41.5 6883.0/41.5
324 22.06 324 22.06
68 68
3600 190/380-400 284TS
3600 190/380-400
3600 190/380-400
U596 284TSTDBD4007
284TS 284TS
U596 √ U596
284TSTDBD4007
$3,328 284TSTDBD4007
E8 √
91.0 $3,328
87
√.0/43.5-41
$3,328
E8 91.0
374
E8 24.34
87
91.0
.0/43.5-41
87.0/43.5-41
374 24.34 374 24.34
3600 575 284TS
3600 3600
575 284TSTDBD4008
U1103 575
284TS 284TS
U1103 √ U1103
284TSTDBD4008
$3,328 284TSTDBD4008
E8 √
91.0 $3,328
√ 28.8$3,328
E8 91.0
374
E8 24.34
91.028.8 28.8374 24.34 374 24.34
1800 200/400 286T
1800 1800
200/400 200/400
U507 286TTDP14042
286T 286T
U507 286TTDP14042
U507$3,213 286TTDP14042
E8 92.4 $3,21383.0/41.5
$3,213
E8 92.4
296
E8 24.99
92.4
83.0/41.5 83.0/41.5296 24.99 296 24.99
1800 190/380-400 286T
1800 190/380-400
1800 190/380-400
U595 286TTDBD14042
286T 286T
U595 √ U595
286TTDBD14042
$3,213 286TTDBD14042
E8 √
92.4 $3,213
87√.0/43.0-41.0
$3,213
E8 92.4
426
E8 27
8792.4
.09
.0/43.0-41.0
87.0/43.0-41.0
426 27.09 426 27.09
1800 230/460 286T
1800 1800
230/460 230/460
U506 286TTDP4041
286T 286T
U506 286TTDP4041
U506$3,213 286TTDP4041
E8 92.4 $3,21372.0/36.0
$3,213
E8 92.4
331
E8 24.99
92.4
72.0/36.0 6872.0/36.0
331 24.99 331 24.99
68 68
1800 230/460 286T
1800 1800
230/460 230/460
U594 286TTDBD4041
286T 286T
U594 √ U594
286TTDBD4041
$3,213 286TTDBD4041
E8 √
92.4 $3,213
√72.0/36.0
$3,213
E8 92.4
424
E8 2792.4
.09
72.0/36.0 6872.0/36.0
424 27.09 424 27.09
68 68
1800 575 286T
1800 1800
575
U1104 286TTDBD4035
575
286T 286T
U1104 √ U1104
286TTDBD4035
$3,213 286TTDBD4035
E8 √
92.4 $3,213
√ 28.8$3,213
E8 92.4
424
E8 2792.4
.0928.8 28.8424 27.09 424 27.09
40 3600 200/400
40 286TS
3600
40 3600
200/400 200/400
U509 286TSTDP4023
286TS 286TS
U509 √ U509
286TSTDP4023
$4,259 286TSTDP4023
E8 √
91.7 $4,259
√108/54.0
$4,259
E8 91.7
327
E8 23.56
91.7
108/54.0 108/54.0
d 327 23.56 327 23.56
d d
3600 190/380-400 286TS
3600 190/380-400
3600 190/380-400
U593 286TSTDBD4023
286TS 286TS
U593 √ U593
286TSTDBD4023
$4,259 286TSTDBD4023
E8 √
91.7 $4,259
114/57
√ .0-54.0
$4,259
E8 91.7
419
E8 25.72
114/57
91.7 .0-54.0
114/57.0-54.0
419 25.72 419 25.72
3600 230/460 286TS
3600 3600
230/460 230/460
U508 286TSTDP4022
286TS 286TS
U508 √ U508
286TSTDP4022
$4,259 286TSTDP4022
E8 √
91.7 $4,259
√94.0/47
$4,259
E8
.0 91.7
360
E8 23.56
91.7
94.0/47.0d,94.0/47
68 360 .0 23.56
360 23.56
d, 68 d, 68
3600 230/460 286TS
3600 3600
230/460 286TSTDBD4022
U592 230/460
286TS 286TS
U592 √ U592
286TSTDBD4022
$4,259 286TSTDBD4022
E8 √
91.7 $4,259
√94.0/47
$4,259
E8
.0 91.7
421
E8 25.72
91.7
94.0/47.0 68
94.0/47421.0 25.72
421 25.72
68 68
3600 575 286TS
3600 3600
575 286TSTDBD4008
U1106 575
286TS 286TS
U1106 √ U1106
286TSTDBD4008
$4,259 286TSTDBD4008
E8 √
91.7 $4,259
√ 37$4,259
.5E8 91.7
421
E8 25.72
91.737.5 37.5
421 25.72 421 25.72
1800 200/400 324T
1800 1800
200/400 200/400
U511 324TTDP14049
324T 324T
U511 √ U511
324TTDP14049
$3,996 324TTDP14049
E8 √
93.0 $3,996
√155/77
$3,996
E8
.5 93.0
431
E8 26.00
93.0
155/77.5 d 155/77431
.5 26.00431 26.00
d d
1800 190/380-400 324T
1800 190/380-400
1800 190/380-400
U511A 324TTDCD14049
324T 324T
U511A √U511A
324TTDCD14049
$3,996 324TTDCD14049
E8 √
93.0 $3,996
114/56.5-53.5
√ $3,996
E8 93.0
272
E8 28.55
114/56.5-53.5
93.0 114/56.5-53.5
272 28.55 272 28.55
1800 230/460 324T
1800 1800
230/460 230/460
U510 324TTDP4038
324T 324T
U510 √ U510
324TTDP4038
$3,996 324TTDP4038
E8 √
93.0 $3,996
√97.0/48.5
$3,996
E8 93.0
465
E8 26.00
93.0
97.0/48.5d,9768
.0/48.5
465 26.00 465 26.00
d, 68 d, 68
1800 230/460 324T
1800 1800
230/460 230/460
U510A 324TTDCD4038
324T 324T
U510A √U510A
324TTDCD4038
$3,996 324TTDCD4038
E8 √
93.0 $3,996
√94.0/47
$3,996
E8
.0 93.0
272
E8 28.55
93.0
94.0/47.0 68
94.0/47272.0 28.55
272 28.55
68 68
1800 575 324T
1800 1800
575
U1107 324TTDCD4035
575
324T 324T
U1107 √ U1107
324TTDCD4035
$3,996 324TTDCD4035
E8 √
93.0 $3,996
√ 37$3,996
.5E8 93.0
272
E8 28.55
93.0 37.5 37.5
272 28.55 272 28.55
50 3600 200/400
50 324TS
3600
50 3600
200/400 200/400
U513 324TSTDP4007
324TS 324TS
U513 √ U513
324TSTDP4007
$5,062 324TSTDP4007
E8 √
92.4 $5,062
√135/67
$5,062
E8
.5 92.4
401
E8 24.50
92.4
135/67.5 d 135/67 401
.5 24.50401 24.50
d d
3600 190/380-400 324TS
3600 190/380-400
3600 190/380-400
U513A 324TSTDCD4007
324TS U513A
324TS √U513A
324TSTDCD4007
$5,062 324TSTDCD4007
E8 92.4
√ $5,062
138/69.0-67
√ $5,062
E8 .0 92.4
633
E8 27
138/69.0-67
92.4
.05 138/69.0-67
.0 633 .0 27.05
633 27.05
3600 230/460 324TS
3600 3600
230/460 230/460
U512 324TSTDP4010
324TS 324TS
U512 √ U512
324TSTDP4010
$5,062 324TSTDP4010
E8 √
92.4 $5,062
√117/58.5
$5,062
E8 92.4
414
E8 24.50
92.4
117/58.5d,117/58.5
68 414 24.50 414 24.50
d, 68 d, 68
3600 230/460 324TS
3600 3600
230/460 324TSTDCD4010
U512A 230/460
324TS U512A
324TS √U512A
324TSTDCD4010
$5,062 324TSTDCD4010
E8 92.4
√ $5,062
√114/57
$5,062
E8
.0 92.4
252
E8 2792.4
.05
114/57.0 68 114/57252
.0 27.05
252 27.05
68 68
PUMP MOTORS

PUMP MOTORS

PUMP MOTORS

3600 575 324TS

3600 3600
575 324TSTDCD4008
U1109 575
324TS 324TS
U1109 √ U1109
324TSTDCD4008
$5,062 324TSTDCD4008
E8 √
92.4 $5,062
√ 45.5$5,062
E8 92.4
252
E8 2792.4
.0545.5 45.5252 27.05 252 27.05
1800 200/400 326T
1800 1800
200/400 200/400
U515 326TTDP4344
326T 326T
U515 326TTDP4344
U515$4,657 326TTDP4344
E8 93.0 $4,657 141/70.5
$4,657
E8 93.0
498
E8 2793.0
.50
141/70.5 141/70.5 498 27.50 498 27.50
1800 190/380-400 326T
1800 190/380-400
1800 190/380-400
U515A 326TTDCD4344
326T 326T
U515A √U515A
326TTDCD4344
$4,657 326TTDCD4344
E8 93.0
√ $4,657
145/72.0-68.5
√ $4,657
E8 93.0
324
E8 29.73
145/72.0-68.5
93.0 145/72.0-68.5
324 29.73 324 29.73
1800 230/460 326T
1800 1800
230/460 230/460
U514 326TTDP4345
326T 326T
U514 326TTDP4345
U514$4,657 326TTDP4345
E8 93.0 $4,657 123/61.5
$4,657
E8 93.0
515
E8 2793.0
.50
123/61.5 68123/61.5
515 27.50 515 27.50
68 68
1800 230/460 326T
1800 1800
230/460 230/460
U514A 326TTDCD4345
326T 326T
U514A √U514A
326TTDCD4345
$4,657 326TTDCD4345
E8 √
93.0 $4,657
√120/60.0
$4,657
E8 93.0
324
E8 29.73
93.0
120/60.0 68120/60.0
324 29.73 324 29.73
68 68
1800 575 326T
1800 1800
575
U1110 326TTDCD4035
575
326T 326T
U1110 √ U1110
326TTDCD4035
$4,657 326TTDCD4035
E8 √
93.0 $4,657
√ 48.0$4,657
E8 93.0
324
E8 29.73
93.048.0 48.0324 29.73 324 29.73
Catalog numbers (Cat No.)Catalog
highlighted
numbers
Catalog
in (Cat
numbers
No.) highlighted
(Cat No.)Blue
highlighted
in shaded in
areas are castBlue
ironshaded
frames.
Blue
areas
shaded
are cast
areas
iron
areframes.
cast iron frames. Continued on next page. Continued Continued
on next page.
on next page.
bold blue are EPAct efficient.
bold blue are
boldEPAct
blue efficient.
are EPAct efficient.

NEMA is a trademark of National

NEMA
Electrical
is a trademark
Manufacturers
NEMA is ofa trademark
National
Association.
Electrical
of National
Manufacturers
Electrical Manufacturers
Association. Association.
All Rights Reserved. All Rights Reserved.
All Rights Reserved.

161 161 161

PUMP MOTORS

Prices and specifications are subject

Pricestoand
change
specifications
Prices
without
and specifications
notice.
are subject toare
change
subject
without
to change
notice.
without notice.

page 27 C
b
B
WWW.ANC.SA
 R
R

RE PUMP, THREE PHASE

FIRE PUMP,
FIRE MOTORS
THREE
PUMP, PHASE
THREE MOTORS
PHASE MOTORS
P, RIGID BASE,
ODPEPACT
ODP,MOTORS
, RIGID BASE,BASE,
RIGID EPACTEPACT
MOTORS
MOTORS FI
OD

STOCK

STOCK

STOCK
CAT. CAT.
MODEL FRAME CAT.LIST
MODEL MULT.
MODELNOM. LIST F.L.
MULT.
LIST MULT. “C”
NOM. NOM.F.L. FOOTF.L. “C” FOOT
“C” FOOT
RPM VOLTS
HP FRAME
RPM
HP VOLTS
RPM FRAME
VOLTS WT. WT. WT.
NO. NO. NO. NO.PRICE
NO. SYMB.
NO. EFF. PRICE AMPS
SYMB.
PRICE SYMB. DIM.
EFF. AMPSNOTES
EFF. AMPS DIM. NOTES
DIM. NOTES
H

3600 200/400
60 326TS
3600
60 U517 326TSTDP4022
200/400 200/400
3600 326TS 326TS
U517 √ U517$5,755 326TSTDP4022
326TSTDP4022 E8 √93.0 $5,755
√155/77 .5
E8
$5,755 480
93.0
E8 26.00 d 480
155/77.5 155/77
93.0 .5 26.00480 d
26.00 d 2
3600 190/380-400 326TS
3600 U517A
190/380-400326TSTDCD4022
326TS U517A
3600 190/380-400 326TS √U517A$5,755 326TSTDCD4022
326TSTDCD4022 E8 √93.0 $5,755
165/82.5-77
E8 .5
√ $5,755 694
93.0
E8 28.23
165/82.5-77
93.0 .5 694 .5 28.23
165/82.5-77 694 28.23
3600 230/460 326TS
3600 U516 326TSTDP4024
230/460 230/460
3600 326TS 326TS
U516 √ U516$5,755 326TSTDP4024
326TSTDP4024 E8 √93.0 $5,755
√135/67 .5
E8
$5,755 378
93.0
E8 26.00
135/67.5d,135/67
93.0 68 378.5 26.00378 d, 68
26.00 d, 68
3600 230/460 326TS
3600 230/460 326TSTDCD4024
U516A
3600 326TS U516A
230/460 326TS √U516A$5,755 326TSTDCD4024
326TSTDCD4024 E8 √93.0 $5,755
√136/68.0
E8
$5,755 277
93.0
E8 28.23
136/68.0 68
93.0 277 28.23
136/68.0 277 68
28.23 68
3600 575 326TS
3600 575 326TSTDCD4008
U1112
3600 326TS U1112
575 326TS √U1112$5,755 326TSTDCD4008
326TSTDCD4008 E8 √93.0 $5,755
√ 54.5 E8
$5,755 277
93.0
E8 28.2354.5
93.0 277 28.23
54.5 277 28.23
1800 200/400 326TS
1800 200/400 326TSTDR14034
U521
1800 326TS 326TS
200/400 U521 U521$5,235 326TSTDR14034
326TSTDR14034 E8 93.6 $5,235167/83.5
E8
$5,235 418
93.6
E8 29.50
167/83.5 167/83.5
93.6 418 29.50 418 29.50
1800 200/400 364TS
1800 U519
1800 364TSTDS4337
200/400 200/400
364TS 364TS
U519 $5,868 364TSTDS4337
364TSTDS4337
U519 E8 93.6 $5,868166/83.0
E8
$5,868 663
93.6
E8 26.50
166/83.0 166/83.0
93.6 663 26.50 663 26.50 3
1800 190/380-400 364TS
1800 U519A
190/380-400364TSTDCD4337
364TS U519A
1800 190/380-400 364TS √U519A$5,868 364TSTDCD4337
364TSTDCD4337 E8 √93.6 $5,868
167/83.5-80.0
E8
√ $5,868 839
93.6
E8 29.57
167/83.5-80.0 839 29.57
93.6 167/83.5-80.0 839 29.57
1800 200/400 364T
1800 U538
1800 364TTDS14329
200/400 200/400
364T U538
364T $5,868 364TTDS14329
364TTDS14329
U538 E8 93.6 $5,868166/83.0
E8
$5,868 686
93.6
E8 28.62
166/83.0 166/83.0
93.6 686 28.62 686 28.62 3
1800 230/460 364T
1800 U520
1800 364TTDS4328
230/460 230/460
364T U520
364T U520$5,868 364TTDS4328
364TTDS4328 E8 93.6 $5,868144/72.0
E8
$5,868 716
93.6
E8 28.62
144/72.0 68
93.6 716 28.62
144/72.0 716 68
28.62 68
1800 230/460 364TS
1800 U518 364TSTDS4332
230/460 230/460
1800 364TS 364TS
U518 √ U518$5,868 364TSTDS4332
364TSTDS4332 E8 √93.6 $5,868
√144/72.0
E8
$5,868 699
93.6
E8 26.50
144/72.0d,144/72.0
93.6 68 699 26.50 699 d, 68
26.50 d, 684
1800 230/460 364TS
1800 230/460 364TSTDCD4332
U518A
1800 364TS U518A
230/460 364TS √U518A$5,868 364TSTDCD4332
364TSTDCD4332 E8 √93.6 $5,868
√138/69.0
E8
$5,868 846
93.6
E8 29.57
138/69.0 68
93.6 846 29.57
138/69.0 846 68
29.57 68
1800 575 364TS 4
1800 575 364TSTDCD4035
U1113
1800 364TS U1113
575 364TS √U1113$5,868 364TSTDCD4035
364TSTDCD4035 E8 √93.6 $5,868
√ 55.0 E8
$5,868 846
93.6
E8 29.5755.0
93.6 846 29.57
55.0 846 29.57
3600 200/400
75 364TS
3600
75 U523 364TSTDS4024
200/400 200/400
3600 364TS 364TS
U523 √ U523$7,887 364TSTDS4024
364TSTDS4024 E8 √93.0 $7,887
√210/105
$7E8
,887 713
93.0
E8 26.50
210/105 d210/105
93.0 713 26.50 713 d
26.50 d
5
3600 190/380-400 364TS
3600 U523A
190/380-400364TSTDCD4024
364TS U523A
3600 190/380-400 364TS √U523A$7,887 364TSTDCD4024
364TSTDCD4024 E8 √93.0 $7,887
206/103-99.0
√ $7E8
,887 826
93.0
E8 29.57
206/103-99.0
93.0 826 29.57
206/103-99.0 826 29.57
3600 230/460 364TS
3600 U522 364TSTDS4025
230/460 230/460
3600 364TS 364TS
U522 √ U522$7,887 364TSTDS4025
364TSTDS4025 E8 √93.0 $7,887
√183/91.5
$7E8
,887 750
93.0
E8 26.50
183/91.5d,183/91.5
93.0 68 750 26.50 750 d, 68
26.50 d, 68
Cata
3600 230/460 364TS
3600 230/460 364TSTDCD4025
U522A
3600 364TS U522A
230/460 364TS √U522A$7,887 364TSTDCD4025
364TSTDCD4025 E8 √93.0 $7,887
√170/85.0
$7E8
,887 807
93.0
E8 29.57
170/85.0 68
93.0 807 29.57
170/85.0 807 68
29.57 68
bold
3600 575 364TS
3600 575 364TSTDCD4008
U1115
3600 364TS U1115
575 364TS √U1115$7,887 364TSTDCD4008
364TSTDCD4008 E8 √93.0 $7,887
√ 68.0
$7E8
,887 807
93.0
E8 29.5768.0
93.0 807 29.57
68.0 807 29.57 Blue
1800 200/400 365TS
1800 U525
1800 365TSTDS4347
200/400 200/400
365TS 365TS
U525 $7,148 365TSTDS4347
365TSTDS4347
U525 E8 94.1 $7,148204/102
$7E8
,148 766
94.1
E8 2794.1
.50
204/102 204/102 766 27.50 766 27.50
1800 190/380-400 365TS
1800 U525A
190/380-400365TSTDCD4347
365TS U525A
1800 190/380-400 365TS √U525A$7,148 365TSTDCD4347
365TSTDCD4347 E8 √94.1 $7,148
206/103-97
√ $7E8
,148.0 879
94.1
E8 31.14
206/103-97
94.1 .0 879 .0 31.14
206/103-97 879 31.14
1800 230/460 365TS
1800 U524 365TSTDS4332
230/460 230/460
1800 365TS 365TS
U524 √ U524$7,148 365TSTDS4332
365TSTDS4332 E8 √94.1 $7,148
√177/88.5
$7E8
,148 772
94.1
E8 2794.1
.50
177/88.5d,177/88.5
68 772 27.50 772 d,.50
27 68 d, 68
1800 230/460 365TS
1800 230/460 365TSTDCD4332
U524A
1800 365TS U524A
230/460 365TS √U524A$7,148 365TSTDCD4332
365TSTDCD4332 E8 √94.1 $7,148
√170/85.0
$7E8
,148 416
94.1
E8 31.14
170/85.0 68
94.1 416 31.14
170/85.0 416 68
31.14 68
1800 575 365TS
1800 575 365TSTDCD4035
U1116
1800 365TS U1116
575 365TS √U1116$7,148 365TSTDCD4035
365TSTDCD4035 E8 √94.1 $7,148
√ 68.0
$7E8
,148 416
94.1
E8 31.1468.0
94.1 416 31.14
68.0 416 31.14
0 3600 200/400
100 365TS
3600
100 U527 365TSTDS4303
200/400 200/400
3600 365TS 365TS
U527 √ U527
$10,361 365TSTDS4303
365TSTDS4303 E8 √93.0$10,361
√276/138
E8
$10,361 748
93.0
E8 2793.0
.50
276/138 d276/138748 27.50 748 d
27.50 d
3600 190/380-400 365TS
3600 U527A
190/380-400365TSTDCD4303
365TS U527A
3600 190/380-400 365TS √U527A
$10,361365TSTDCD4303
365TSTDCD4303 E8 √93.0$10,361
276/138-132
E8
√ $10,361 927
93.0
E8 31.14
276/138-132
93.0 927 31.14
276/138-132 927 31.14
3600 230/460 365TS
3600 U526 365TSTDS4025
230/460 230/460
3600 365TS 365TS
U526 √ U526
$10,361 365TSTDS4025
365TSTDS4025 E8 √93.0$10,361
√240/120
E8
$10,361 775
93.0
E8 2793.0
.50
240/120d,240/120
68 775 27.50 775 d,.50
27 68 d, 68
3600 230/460 365TS
3600 230/460 365TSTDCD4025
U526A
3600 365TS U526A
230/460 365TS √U526A
$10,361365TSTDCD4025
365TSTDCD4025 E8 √93.0$10,361
√228/114
E8
$10,361 919
93.0
E8 31.14
228/114 68
93.0 919 31.14
228/114 919 68
31.14 68
3600 575 365TS
3600 575 365TSTDCD4008
U1118
3600 365TS U1118
575 365TS √ U1118
$10,361365TSTDCD4008
365TSTDCD4008 E8 √93.0$10,361
√ 91.0 E8
$10,361 919
93.0
E8 31.1491.0
93.0 919 31.14
91.0 919 31.14
1800 200/400 404TS
1800 U529
1800 404TSTDS4333
200/400 200/400
404TS 404TS
U529 √ U529$9,255 404TSTDS4333
404TSTDS4333 E8 √94.1 $9,255
√271/136
E8
$9,255 1009
94.1
E8 29.50
271/136 d
94.1 1009 29.50
271/136 1009 d
29.50 d
1800 190/380-400 404TS
1800 U529A
190/380-400404TSTDCD4333
404TS U529A
1800 190/380-400 404TS √U529A$9,116 404TSTDCD4333
404TSTDCD4333 E8 √94.1 $9,116
276/137-130
√ E8
$9,116 575
94.1
E8 33.86
276/137-130
94.1 575 33.86
276/137-130 575 33.86
1800 230/460 404TS
1800 U528 404TSTDS4332
230/460 230/460
1800 404TS 404TS
U528 √ U528$9,116 404TSTDS4332
404TSTDS4332 E8 √94.1 $9,116
√236/118
E8
$9,116 1002
94.1
E8 29.50
236/118d, 236/118
94.1 68 1002 29.501002 d, 68
29.50 d, 68
1800 230/460 404TS
1800 230/460 404TSTDCD4332
U528A
1800 404TS U528A
230/460 404TS √U528A$9,116 404TSTDCD4332
404TSTDCD4332 E8 √94.1 $9,116
√228/114
E8
$9,116 525
94.1
E8 33.86
228/114 68
94.1 525 33.86
228/114 525 68
33.86 68
1800 575 404TS
1800 575 404TSTDCD4035
U1119
1800 404TS U1119
575 404TS √ U1119
$9,116 404TSTDCD4035
404TSTDCD4035 E8 √94.1 $9,116
√ 91.0 E8
$9,116 575
94.1
E8 33.8691.0
94.1 575 33.86
91.0 575 33.86
5 3600 200/400
125 404TS
3600
125 200/400 404TSTDS14008
U531
3600 404TS 404TS
200/400 U531 √ U531
$12,889404TSTDS14008
404TSTDS14008 E8 √93.6$12,889
√327/163
E8
$12,889 949
93.6
E8 29.50
327/163 d
93.6 949 29.50
327/163 949 d
29.50 d
3600 380-400 404TS
3600 380-400 404TSTDCD14008
U531A
3600 404TS U531A
380-400 404TS √U531A
$12,889404TSTDCD14008
404TSTDCD14008 E8 √93.6$12,889
√167-159
E8
$12,889 1159
93.6
E8 33.86
167-159 167-159
93.6 1159 33.861159 33.86
3600 230/460 404TS
3600 U530
3600 404TSTDS4017
230/460 230/460
404TS 404TS
U530 √ U530
$12,889 404TSTDS4017
404TSTDS4017 E8 √93.6$12,889
√284/142
E8
$12,889 1005
93.6
E8 29.50
284/142 68
93.6 1005 29.50
284/142 1005 68
29.50 68
3600 460 404TS
3600 U530A
460
3600 404TSTDCD4017
404TS U530A
460 404TS √U530A
$12,889404TSTDCD4017
404TSTDCD4017 E8 √93.6$12,889
√ 139 E8
$12,889 1165
93.6
E8 33.86139 68 139
93.6 1165 33.861165 68
33.86 68
3600 575 404TS
3600 575 404TSTDCD4008
U1121
3600 404TS U1121
575 404TS √U1121
$12,889404TSTDCD4008
404TSTDCD4008 E8 √93.6$12,889
√ 111 E8
$12,889 1165
93.6
E8 33.86
93.6111 1165 33.86
111 1165 33.86
1800 200/400 405TS
1800 U533
1800 405TSTDS4333
200/400 200/400
405TS 405TS
U533 $10,916 405TSTDS4333
405TSTDS4333
U533 E8 94.5$10,916336/168
E8
$10,916 1070
94.5
E8 31.00
336/168 336/168
94.5 1070 31.001070 31.00
1800 380-400 405TS
1800 380-400 405TSTDCD4333
U533A
1800 405TS U533A
380-400 405TS √U533A
$10,916405TSTDCD4333
405TSTDCD4333 E8 √94.5$10,916
√170-162
E8
$10,916 651
94.5
E8 35.44
170-162 170-162
94.5 651 35.44 651 35.44
1800 230/460 405TS
1800 U532 405TSTDS4332
230/460 230/460
1800 405TS 405TS
U532 √ U532
$10,916 405TSTDS4332
405TSTDS4332 E8 √94.5$10,916
√288/144
E8
$10,916 1125
94.5
E8 31.00
288/144d,288/144
94.5 68 1125 31.001125 d, 68
31.00 d, 68
1800 460 405TS
1800 460 405TSTDCD4332
U532A
1800 405TS U532A
460 405TS √U532A
$10,916405TSTDCD4332
405TSTDCD4332 E8 √94.5$10,916
√ 142 E8
$10,916 605
94.5
E8 35.44142 68 142
94.5 605 35.44 605 68
35.44 68
1800 575 405TS
1800 575 405TSTDCD4035
U1122
1800 405TS U1122
575 405TS √U1122
$10,916405TSTDCD4035
405TSTDCD4035 E8 √94.5$10,916
√ 114 E8
$10,916 605
94.5
E8 35.44114
94.5 114605 35.44 605 35.44
0 3600 460150 405TS
3600
150 U534460
3600 405TSTDS4006
405TS 405TS
460 U534 √ U534
$15,679 405TSTDS4006
405TSTDS4006 E8 √93.6$15,679
√ 169 E8
$15,679 1004
93.6
E8 31.00169 d, 68169
93.6 1004 31.001004 d, 68
31.00 d, 68
3600 460 405TS
3600 460 405TSTDCD4006
U534A
3600 405TS U534A
460 405TS √U534A
$15,679405TSTDCD4006
405TSTDCD4006 E8 √93.6$15,679
√ 168 E8
$15,679 1244
93.6
E8 35.44168 68 168
93.6 1244 35.441244 68
35.44 68
3600 575 405TS
3600 575 405TSTDCD4008
U1124
3600 405TS U1124
575 405TS √U1124
$15,679405TSTDCD4008
405TSTDCD4008 E8 √93.6$15,679
√ 134 E8
$15,679 1244
93.6
E8 35.44134
93.6 1244 35.44
134 1244 35.44
1800 460 444TS
1800 U535460
1800 444TSTDS4332
444TS 444TS
460 U535 √ U535
$15,764 444TSTDS4332
444TSTDS4332 E8 √95.0$15,764
√ 173 E8
$15,764 1286
95.0
E8 34.00173 d, 68173
95.0 1286 34.001286 d, 68
34.00 d, 68
1800 460 444TS
1800 460 444TSTDCD4332
U535A
1800 444TS U535A
460 444TS √U535A
$15,764444TSTDCD4332
444TSTDCD4332 E8 √95.0$15,764
√ 170 E8
$15,764 835
95.0
E8 40.83170 68 170
95.0 835 40.83 835 68
40.83 68
1800 575 444TS
1800 575 444TSTDCD4035
U1125
1800 444TS U1125
575 444TS √U1125
$15,764444TSTDCD4035
444TSTDCD4035 E8 √95.0$15,764
√ 136 E8
$15,764 835
95.0
E8 40.83136
95.0 136835 40.83 835 40.83
0 3600 460200 444TS
3600
200 U536460
3600 444TSTDS4010
444TS 444TS
460 U536 √ U536
$24,391 444TSTDS4010
444TSTDS4010 E8 √94.5$24,391
√ 225 E8
$24,391 1313
94.5
E8 34.00225 d, 68225
94.5 1313 34.001313 d, 68
34.00 d, 68
3600 460 444TS
3600 460
U536A
3600 444TSTDCD4010
444TS U536A
460 444TS √U536A
$24,391444TSTDCD4010
444TSTDCD4010 E8 √94.5$24,391
√ 220 E8
$24,391 750
94.5
E8 40.83220 68 220
94.5 750 40.83 750 68
40.83 68
3600 575 444TS
3600 575 444TSTDCD4008
U1127
3600 444TS U1127
575 444TS √U1127
$24,391444TSTDCD4008
444TSTDCD4008 E8 √94.5$24,391
√ 176 E8
$24,391 750
94.5
E8 40.83176
94.5 176750 40.83 750 40.83
1800 460 445TS
1800 U537460
1800 445TSTDS4332
445TS 445TS
460 U537 √ U537
$19,916 445TSTDS4332
445TSTDS4332 E8 √95.0$19,916
√ 233 E8
$19,916 1414
95.0
E8 36.00233 d, 68233
95.0 1414 36.001414 d, 68
36.00 d, 68
1800 460 445TS
1800 460 445TSTDCD4332
U537A
1800 445TS U537A
460 445TS √U537A
$19,916445TSTDCD4332
445TSTDCD4332 E8 √95.0$19,916
√ 225 E8
$19,916 900
95.0
E8 40.83225 68 225
95.0 900 40.83 900 68
40.83 68
PUMP MOTORS

PUMP MOTORS

1800 575 445TS

1800 575 445TSTDCD4035
U1128
1800 445TS U1128
575 445TS √U1128
$19,916445TSTDCD4035
445TSTDCD4035 E8 √95.0$19,916
√ 180 E8
$19,916 1015
95.0
E8 40.83180
95.0 1015 40.83
180 1015 40.83
g numbers (Cat No.)Catalog
highlighted in
numbers
Catalog
bold blue are
lue are EPAct efficient. page 28
EPAct
bold
(Cat No.) highlighted
numbers
blue efficient.
in
(Cat No.) highlighted
are EPAct efficient.
in Continued on next page. Continued Continued
on next page.
on next pa

haded areas are castBlue

ironshaded
frames.areas
Blue are cast
shaded iron
areas areframes.
cast iron frames.
WWW.ANC.SA
 RR

FIRE PUMP,
PUMP, THREEFIRE THREE
PHASE
PUMP, PHASE
MOTORS
THREE MOTORS
PHASE MOTORS
ODPEPACT
RIGID BASE, , RIGID BASE,BASE,
ODP,MOTORS
RIGID EPACTEPACT
MOTORS
MOTORS

STOCK
STOCK

STOCK
CAT. CAT.
MODEL FRAME CAT.LIST MODELNOM. LIST
MODEL MULT. MULT.
F.L.
LIST NOM.
MULT. “C”
NOM.F.L. FOOTF.L. “C” FOOT
“C” FOOT
RPM HP
VOLTS RPM
FRAME
HP VOLTS
RPM FRAME
VOLTS WT. WT. WT.
NO. NO. NO. NO.
PRICE NO. EFF. PRICE AMPS
NO. SYMB. SYMB.
PRICE EFF. AMPSNOTES
SYMB. DIM.
EFF. AMPS DIM. NOTES
DIM. NOTES

3600 460250 3600

445TS
250 460
3600
U539 445TS U539
445TSTDS14007
460 445TS 445TSTDS14007
√ U539 √94.5$25,400
$25,400445TSTDS14007
E8 √ 279E8
$25,400 94.5
1456
E8 36.00279 d, 68279
94.5 1456 36.00 d, 68
1456 36.00 d, 68
3600 460 3600
445TS 460
3600
U539A 445TS U539A
445TSTDCD4007
460 445TS 445TSTDCD4007
√U539A √94.5$25,400
$25,400445TSTDCD4007
E8 √ 272E8
$25,400 94.5
1900
E8 40.83272 68 272
94.5 1900 40.83 68
1900 40.83 68
3600 575 3600
445TS 575
3600
U1130 445TS U1130
445TSTDCD4008
575 445TS 445TSTDCD4008
√U1130 √94.5$25,400
$25,400445TSTDCD4008
E8 √ 218E8
$25,400 94.5
1510
E8 40.83218
94.5 1510
218 40.83
1510 40.83
1800 460 1800
445TS 460
1800
U540 445TS U540
445TSTDS14051
460 445TS 445TSTDS14051
√ U540 √95.4$21,978
$21,978445TSTDS14051
E8 √ 287E8
$21,978 95.4
1510
E8 36.00287 d, 68287
95.4 1510 36.00 d, 68
1510 36.00 d, 68
1800 460 1800
445TS 460
1800
U540A 445TS U540A
445TSTDCD14051
460 445TS 445TSTDCD14051
√U540A √95.4$21,978
$21,978445TSTDCD14051
E8 √ 278E8
$21,978 95.4
1090
E8 40.83278 68 278
95.4 1090 40.83 68
1090 40.83 68
1800 575 1800
447TS 575
1800
U1131 447TS U1131
445TSTDCD4036
575 447TS 445TSTDCD4036
√U1131 √95.4$21,978
$21,978445TSTDCD4036
E8 √ 222E8
$21,978 95.4
1500
E8 45.95222
95.4 1500
222 45.95
1500 45.95
3600 460300 3600
447TS
300 460
3600
H178 447TS H178
447TSTDN7001
460 447TS 447TSTDN7001
√ H178 √95.0$26,963
$26,963 447TSTDN7001
E8 √ 332E8
$26,963 95.0
1940
E8 39.50332 25, 68
95.0 1940
332 39.50 25, 68
1940 39.50 25, 68
1800 460 1800
447TS 460
1800
H812 447TS H812
447TSTDN7026
460 447TS 447TSTDN7026
√ H812 √95.4$25,462
$25,462 447TSTDN7026
E8 √ 345E8
$25,462 95.4
1994
E8 39.50345 25, 68
95.4 1994
345 39.50 25, 68
1994 39.50 25, 68
3600 460350 3600
447TS
350 460
3600
H193 447TS H193
447TSTDN7003
460 447TS 447TSTDN7003
√ H193 √95.0$30,885
$30,885 447TSTDN7003
E8 √ 385E8
$30,885 95.0
2013
E8 39.50385 25, 68
95.0 2013
385 39.50 25, 68
2013 39.50 25, 68
1800 460 1800
447TS 460
1800
H813 447TS
460 H813
447TSTDN7027
447TS 447TSTDN7027
√ H813 √95.4$27,672
$27,672 447TSTDN7027
E8 √ 405E8
$27,672 95.4
2064
E8 39.50405 25, 68
95.4 2064
405 39.50 25, 68
2064 39.50 25, 68
3600 460400 3600
447TS
400 460
3600
H817 447TS H817
447TSTDN7005
460 447TS 447TSTDN7005
√ H817 √95.4$35,141
$35,141 447TSTDN7005
E8 √ 435E8
$35,141 95.4
2150
E8 39.50435 25, 68
95.4 2150
435 39.50 25, 68
2150 39.50 25, 68
1800 460 1800
447TS 460
1800
H814 447TS H814
447TSTDN7028
460 447TS 447TSTDN7028
√ H814 √95.4$32,117
$32,117 447TSTDN7028
E8 √ 450E8
$32,117 95.4
2220
E8 39.50450 25, 68
95.4 2220
450 39.50 25, 68
2220 39.50 25, 68
3600 460450 3600
449TS
450 460
3600
H818 449TS H818
449TSTDN7001
460 449TS 449TSTDN7001
√ H818 √95.8$37,533
$37,533 449TSTDN7001
E8 √ 502E8
$37,533 95.8
2544
E8 44.50502 25, 68
95.8 2544
502 44.50 25, 68
2544 44.50 25, 68
1800 460 1800
449TS 460
1800
H815A 449TS H815A
449TSTDN14033
460 449TS 449TSTDN14033
√H815A √95.8$36,926
$36,926449TSTDN14033
E8 √ 505E8
$36,926 95.8
2564
E8 44.5050517, 25,505
95.8 2564
68 44.50
2564 17, 25, 6817, 25, 68
44.50
3600
1800
FIRE PUMP, THREE PHASE MOTORS
460500
460
3600
449TS
500
1800
449TS
460
3600
H819A
460
1800
H816
449TS H819A
449TSTDN14005
460
449TS
449TS
H816
449TSTDN7027
460 449TS
449TSTDN14005
√H819A
449TSTDN7027
√ H816
√95.8$45,567
$45,567449TSTDN14005
E8 √
√95.8$37,611
$37,611 449TSTDN7027
E8 √
545
560
E8
$45,567
E8
$37,611
95.8
2620
E8
95.8
2695
E8
44.50
44.50
545 25, 68
95.8 2620
545
56017, 25,560
95.8 2695
68
44.50
44.50
25, 68
2620 44.50
2695 17,
25, 68
25, 6817, 25, 68
44.50
TEFC, RIGID BASE, EPACT MOTORS
umbers (Cat No.)Catalog numbers
highlighted
Catalog
in (Cat No.) highlighted
numbers in
(Cat No.) highlighted in
bold blue are
are EPAct efficient. EPAct
bold blue efficient.
are EPAct efficient.
ed areas are castBlue
ironshaded
frames.areas
Blue are cast
shaded iron
areas areframes.
cast iron frames.

APPLICATIONS:
For use on pumps designed for fire pump duty and installed per NFPA-20.
Fire Pump motors are not recommended for use with variable frequency drives.

FEATURES:
• UL file EX5190, CSA file LR2025 and CE mark
• Ball bearings
• 1.15 service factor
• Red paint exterior
• NEMA® Design B, Code G or less
• Dual voltage motors have 12 leads, suitable for wye-delta or across the line
start on either voltage, or part winding start on low voltage
• Single voltage motors have 12 leads and are suitable for wye-delta, across
the line, or part winding start
• Will accept C- Face kits, see accessories section
• 230/460 and 460 volt models rated for 50 HZ at next lower HP, 1.15 SF
• For special designs, contact district sales office near you
STOCK

CAT. MODEL LIST MULT. NOM. F.L. “C” FOOT

HP RPM VOLTS FRAME WT.
NO. NO. PRICE SYMB. EFF. AMPS DIM. NOTES

3 3600 230/460 182T Y1600 –– $1,436 E8 85.5 7.4/3.7 84 15.87

1800 230/460 182T Y1601 –– $1,055 E8 87.5 8.6/4.3 90 15.87
5 3600 230/460 184T Y1602 –– $1,653 E8 87.5 12.2/6.1 108 15.87
1800 230/460 184T Y1603 –– $1,218 E8 87.5 13.0/6.5 123 15.87
7.5 3600 230/460 213T Y1604 –– $2,091 E8 88.5 19.0/9.5 188 18.20
PUMP MOTORS
PUMP MOTORS

1800 230/460 213T Y1605 –– $1,554 E8 89.5 20.0/10.0 194 19.63

10 3600 230/460 215T Y1606 –– $2,442 E8 89.5 24.0/12.0 217 19.63
1800 230/460 215T Y1607 –– $1,890 E8 89.5 25.0/12.5 227 22.63
15 3600 230/460 254T Y1608 254TTFPA14014 √ $3,443 E8 90.2 35.0/17.5 262 23.47 d

20
1800
3600
230/460
230/460
254T
256T
Y1609
Y1610
254TTFNA14336
256TTFNA14022
√
√
$2,787
$3,905
E8
E8
91.0
90.2
39.0/19.5
46.5/23.2
297
325
23.65
25.40
d
d
page 29
1800 230/460 256T Y1611 256TTFNA14071 √ $3,302 E8 91.0 50.0/25.0 331 25.27 d
25 3600 230/460 284TS Y1612 284TSTFPA14007 √ $4,160 E8 91.0 59.0/29.5 WWW.ANC.SA
378 24.93 d
1800 230/460 284T Y1613 284TTFPA14055 √ $3,591 E8 92.4 61.0/30.5 369 26.39 d
 RR

for more details about each motor certificate contact

[email protected]

page 30
WWW.ANC.SA
 RR

This section contains all information related to

TECHTOP fire pump motor, including applcations,
details and features.

page 31

SECTION 2
[email protected] www.anc.sa TECHTOP MOTORS
 RR

Motor Details
STANDARD FEATURES

Series Motors Dimensional Drawings

TBH TBS TBW

F
DIN332
G

D
AD

AC
H
27

K
A E C B
AA L

IM B3

O verall & Installation Dimensions

General
Frame
A B C D E F G K AA AD AC L TBS TBW
80 80 125 100 50 40 6 15.5 154 214 134 290 43 114 114
90S/L 90 140 100/125 56 50 8 20 178 231 141 320/345 49/61.5 114 114
100L 100 160 140 63 60 8 24 203 251 151 385 76 114 114
112M 112 190 140 70 60 8 24 231 292 180 405 73 134 134
132S/M 132 216 140/178 89 80 10 33 263 332 200 467/505 61.5 134 134
160M/L 160 254 210/254 108 110 12 37 316 404 244 605/650 91 162 187
180M/L 180 279 241/279 121 110 14 42.5 354 445 265 687/725 160/180 162 187
200L 200 318 305 133 110 16 49 393 500 300 768.5 192 186 233
225S 225 356 286 149 140 18 53 440 558 333 810 199 186 233
2 225 356 311 149 110 16 49 440 558 333 805 211.5 186 233
225M
225 356 311 149 140 18 53 440 558 333 835 211.5 186 233
2 250 406 349 168 140 18 53 484 616 366 915 233 218 260
250M
250 406 349 168 140 18 58 484 616 366 915 233 218 260
2 280 457 368/419 190 140 18 58 560 675 395 984/1035 265/277 218/245 260/280
280S/M
280 457 368/419 190 140 20 67.5 560 675 395 984/1035 265/277 218/245 260/280
2 315 508 406 216 140 18 58 628 825 510 1205 200 290 350
315S
315 508 406 216 170 22 71 628 825 510 1235 200 290 350
2 315 508 457/508 216 140 18 58 628 825 510 1355 200 290 350
315M/L
315 508 457/508 216 170 22 71 628 825 510 1385 200 290 350
2 355 610 560/630 254 140 20 67.5 740 1010 655 1495 140 330 380
355M/L 355 610 560/630 254 170 25 86 740 1010 655 1525 140 330 380
355 610 560/630 254 210 28 90 740 1010 655 1565 140 330 380

page 32
WWW.ANC.SA
 3600 575 286TS U1106 286TSTDBD4008 √ $4,259 E
1800 200/400 324T U511 324TTDP14049 √ $3,996 E
1800 190/380-400 324T U511A 324TTDCD14049 √ $3,996 E
1800 230/460 324T U510 324TTDP4038 √ $3,996 E
RR
1800 230/460 324T U510A 324TTDCD4038 √ $3,996 E
1800 575 324T U1107 324TTDCD4035 √ $3,996 E
50 3600 200/400 324TS U513 324TSTDP4007 √ $5,062 E
3600 190/380-400 324TS U513A 324TSTDCD4007 √ $5,062 E
3600 230/460 324TS U512 324TSTDP4010 √ $5,062 E
3600 230/460 324TS U512A 324TSTDCD4010 √ $5,062 E
T DC Series Motors Dimensional Drawings
3600 575 324TS U1109 324TSTDCD4008 √ $5,062 E
1800 200/400 326T U515 326TTDP4344 $4,657 E
1800 190/380-400 326T U515A 326TTDCD4344 √ $4,657 E
1800 230/460 326T U514 326TTDP4345 $4,657 E
1800 230/460 326T U514A 326TTDCD4345 √ $4,657 E
1800 575 326T U1110 326TTDCD4035 √ $4,657 E
Catalog numbers (Cat No.) highlighted in Blue shaded areas are cast iron frames.
bold blue are EPAct efficient.

NEMA is a trademark of National Electrical Manufacturers Association.

All Rights Reserved.

Prices and specifications are subject to change without notice.

O verall & Installation Dimensions

General
Frame
2E 2F BA U S hj R ES C D O AA AB

254T 8.25
4.25
25 6T 10
10 0.53 4 1.625 0.375 0.375 1.416 2.91 25.2 6.25 13.81 10.1
25 4T C 8. 25
4.75
25 6T C 10

284T 9.5
4.62 1.875 0.5 0.5 1.591 3.28 27.1
28 6T 11
11 0.53 4.75 7.0 15.47 10.81
28 4T S 9. 5
3.25 1.625 0.375 0.375 1.416 1.91 25.7
28 6T S 11

324T 10.5
5.25 2.125 0.5 0.5 1.845 3.91 29.1
32 6T 12
12.5 0.66 5.25 8.0 16.34 2 12.89
32 4T S 10 . 5
3.75 1.875 0.5 0.5 1.591 2.03 27.6
32 6T S 12

364T 11.25
5.88 2.375 0.625 0.625 2.021 4.28 31.9
36 5T 12 . 25
14 0.66 5.88 9.0 19.35 3 14.1
364TS 11.25
3.75 1.875 0.5 0.5 1.591 2.03 29.8
365TS 12.25

404T 12.25
7.25 2.875 0.75 0.75 2.45 5.65 36.5
40 5T 13 . 75
16 0.81 6.62 10.0 21.54 3 15.16
404TS 12.25
4.25 2.125 0.5 0.5 1.845 2.78 33.5
405TS 13.75

444T 14.5
8.5 3.375 0.875 0.875 2.88 6.91 43.3
44 5T 16 . 5

44 4T S 14 . 5
4.75 2.375 0.625 0.625 2.021 3.03 39.6
44 5T S 16 . 5
18 0.81 7.5 11.0 23.66 3 13.65
44 7T 20
8.5 3.375 0.875 0.875 2.88 6.91 51.8
44 9T 25

44 7T S 20
4.75 2.375 0.625 0.625 2.021 3.03 48.1
44 9T S 25

page 33
WWW.ANC.SA
91.7 37.5 421 25.721800 575 284T U1101 284TTDBD4035 √
93.0 155/77.5 30431 26.00 3600 d 230/460 284TS U504 284TSTDP4002 √
93.0 114/56.5-53.5 272 28.55 3600 230/460 284TS U597 284TSTDBD4002 √
93.0 97.0/48.5 465 26.00 d, 68
3600 200/400 284TS U505 284TSTDP14007
93.0 94.0/47.0 272 28.55
R
68
93.0 37.5 272 28.553600 190/380-400 284TS U596 284TSTDBD4007 √
92.4 135/67.5 401 24.503600 d 575 284TS U1103 284TSTDBD4008 √
92.4 138/69.0-67.0 633 27.05 1800 200/400 286T U507 286TTDP14042
92.4 117/58.5 414 24.50 d, 68
92.4 114/57.0 252 27.05
1800 68190/380-400 286T U595 286TTDBD14042 √
1800 230/460 286T U506 286TTDP4041

PUMP MOTORS
92.4 9/23/2020 45.5 252 27.05 QXZF.EX26635 - Fire Pump Motors | UL Product iQ

1800 230/460 286T U594 286TTDBD4041 √

9/23/2020 QXZF.EX26635 - Fire Pump Motors | UL Product iQ
93.0 141/70.5 498 27.50
VHS445TP200U4B 200hp 50/60, 380-415, 251-273.6, 1.15 4 1 1484-1781, 3 F - 50
93.0 145/72.0-68.5 324 29.73 1800
60, 208-230,
575
435.4-479,
286T U1104
1787,
286TTDBD4035 √
50/60, QXZF.EX26635 - Fire 1.15Pump 1 Motors
93.0 123/61.5 515 27.5060 460
68 217.7 1787

93.0 120/60.0 40324250hp 29.73

VHS447TP250U4B 3600 380-415, 200/400
68 312.4-340.5, 286TS 4 U5091484-1781, 286TSTDP4023 3 F - 50 √
60, 208-230, 538-592, 1779,

93.0 48.0 324 29.733600

60 460 190/380-400
Fire Pump Motors
269-309.4 286TS U5931779 286TSTDBD4023 √
VHS447TP300U4B
Continued3600on next page.
See General Information for Fire Pump Motors
300hp
230/460 50/60,
60, 286TS
380-415,
208-230, U508
370.6-404,
639.2-703.1, 286TSTDP4022 1.15 4 1 1488-1786,
1779,
3 F - 50
√
60 460 319.6 1779

SHANGHAI TOP MOTOR CO LTD

VHS447TP350U4B
3600 350hp
230/460 50/60,
286TS
380-415,
U592
432.4-471.3,
286TSTDBD4022 1.15 EX26635 4 1 1488-1786, 3 F - 50
√
303 KANGLIU RD 3600 575 60,
60
286TS U1106
208-230,
460
747.2-822,
373.6
286TSTDBD4008 1779,
1779
√
KANGQIAO TOWN
NANHUI VHS447TP400U4B 1800 400hp 200/400 50/60, 324T
380-415, U511
491.6-535.8, 324TTDP14049 1.15 4 1 1488-1786, 3 F - 50 √
201315 SHANGHAI, CHINA 161 60, 208-230, 863.4-949.7, 1782,
1800 190/380-400 324T 60 460
U511A
431.7
Number 324TTDCD14049 Rated
1782
√
Model FL Service of Ins Prot. Ambient
1800Hz/DC Volts
Click here to view the Colombia Market Access Certification
No. Output 230/460 Amps 324T Factor Poles Speeds U510RPM Phases 324TTDP4038
Class Type (°C) √
Trademark and/or Tradename: 1800
(click on a model number to see
, 230/460
complete product details) 324T , U510A
, 324TTDCD4038
, , , , , √
F-TDC254T15U2B 15hp1800 50, , 380-415, 575 20.5-22.4, ,324T 1.15 2 , 1U1107 2925, 3324TTDCD4035
F - 50 , , , , , √
60, 380-400, 20.5-21.6, 3504,
50 3600 60, ,
200/400
208-230, 35.7-39.5,,
324TS ,
U513 3504, ,
324TSTDP4007 , , , ,
√
60, 460, , 17.8, 3504,
, , , , , ,

, ,
360060 190/380-400 575 14.3
,
324TS U513A ,
3504 324TSTDCD4007
, , , , ,
√
F-TDC254T15U4B 15hp3600 50, 230/460
380-415, 20.5-22.4, 324TS 1.15 4 1 U512 1440, 3 324TSTDP4010
F - 50 √
, , , , , , , ,
60, 380-400, 20.5-21.6, 1728,
360060, 208-230,
, 230/460 35.7-39.4, 324TS U512A , 1728, 324TSTDCD4010 , , , , , √
60, 460, 17.8, 1728,
9/23/2020 ,
360060 575 575QXZF.EX26635
, ,
14.3 ,
324TS
- Fire Pump Motors | UL ProductU1109
iQ 1728 324TSTDCD4008
, , , , ,
√
20hp1800 200/400 326T 1 U515 3 326TTDP4344
, , , , , , , , ,
F-TDC256T20U2B 50, 380-415, 27-29.5, 1.15 2 2925, F Last
- Updated
50 on 2020-09-22
, 60, 380-400, , 27-28.5, , , 3504, , , ,
180060, 190/380-400 208-230, 47-52, 326T U515A 3504, 326TTDCD4344 √
https://iq.ulprospector.com/en/profile?e=142973 60, 460, 23.5, 3504, 73/74

1800database does
The appearance of a company's name or product in this 60 575 230/460 18.8
not in itself assure
326T U514
that products so identified have been manufactured3504 326TTDP4345
under UL's Follow-Up Service. Only those products bearing
1800
the UL Mark should be considered to be Certified and covered under UL's230/460
Follow-Up Service. Always look for 326T U514A
the Mark on the product. 326TTDCD4345 √
1800
UL permits the reproduction of the material contained 575
in the Online Certification 326T
Directory subject to the following U1110
conditions: 1. The 326TTDCD4035
Guide Information, Assemblies, Constructions, Designs, Systems, √
and/or Certifications (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online
Certifications Directory with permissionnumbers
from UL" must appear
https://iq.ulprospector.com/en/profile?e=142973
Catalog adjacentNo.)
(Cat to the extracted material. In addition,in
highlighted the reprinted material must include a copyright noticeBlue
in the following format: "© 2020
shaded UL 1/74
areas are
LLC"
bold blue are EPAct efficient.

NEMA is a trademark of National Electrical Manufacturers Association.

All Rights Reserved.
for more details about each pumps certificate contact
Prices and specifications are subject to change without notice.
[email protected]

page 34
WWW.ANC.SA
$2,762 E8 91.7
Fuel Filter
24.4 378 25.71
Primary Filter with Priming Pump

$3,328 E8 91.0 72.0/36.0

Fuel Injection System
Engine Heater
432 22.06
Stanadyne Direct Injection
115V-AC, 1000 Watt
d, 68 230V-AC, 1000 Watt

$3,328 E8 91.0
Governor, Speed
Heat Exchanger
72.0/36.0 399 24.34
Constant Speed, Mechanical
68
Tube and Shell Type, 60 PSI (4 BAR), NPT(F) Connections –
Sea/Salt Water Compatible
$3,328 E8 91.0
Instrument Panel 83.0/41.5
R
324 22.06 68
English and Metric, Tachometer, Hourmeter, Water Temperature,
Oil Pressure and Two (2) Voltmeters

$3,328 E8 91.0
Junction Box
87.0/43.5-41 374 24.34
Integral with Instrument Panel; For DC Wiring Interconnection to
Engine Controller

$3,328 E8 91.0
Lube Oil Cooler
Lube Oil Filter 28.8 374 24.34
Engine Water Cooled, Plate Type
Full Flow with By-Pass Valve
Lube Oil Pump Gear Driven, Gear Type
$3,213 E8 92.4 83.0/41.5
Manual Start Control 296 24.99
On Instrument Panel with Control Position Warning Light
Overspeed Control Electronic with Reset and Test on Instrument Panel
$3,213 E8 92.4 87.0/43.0-41.0 426 27.09
Raw Water Solenoid Operation Automatic from Fire Pump Controller and from Engine Instrument
Panel

$3,213 E8 92.4 72.0/36.0

Run – Stop Control
Run Solenoid
331 24.99
12V-DC Energized to Run
68
On Instrument Panel with Control Position Warning Light
12V-DC Energized to Stop; 24V-DC Energized to Run; 24V-DC

$3,213 E8 92.4
Starters 72.0/36.0 424 27.09
Two (2) 12V-DC 68 Energized to Stop
T wo (2) 24V-DC

$3,213 E8 92.4
Throttle Control
Water Pump 28.8 424 27.09
Adjustable Speed Control, Tamper Proof
Centrifugal Type, Poly-Vee Belt Drive with Guard

$4,259 E8 91.7 108/54.0 327 23.56 d

Abbreviations: DC –Direct Current,, AC – Alternatingg Current,, SAE – Societyy of Automotive Engineers,
g , NPT(F)
( ) – National Pipe
p Tapered
p Thread ((Female),
), NPT(M)
( ) – National
$4,259 E8 91.7 114/57.0-54.0 419 25.72
Pipe Tapered Thread (Male), NA – Naturally Aspirated, T- Turbocharged, ANSI – American National Standards Institute

$4,259 E8 91.7 94.0/47.0 360 23.56 d, 68

$4,259 E8 91.7 94.0/47.0 421 25.72 68 CN
Add：No.45 Xi Chong Road, Q

$4,259 E8 91.7 37.5 421 25.72

® Engine Data Sheet

$3,996 E8 93.0 155/77.5 431 26.00 NM4-105 d

Fire Protection Products, Inc.
3133 E. Kemper Rd., Cincinnati, Ohio 45241
Engine Modle
UK, Ltd.
Grange Works, Lomond Rd., Coatbridge, ML5-2NN
Date 20
United States of America United Kingdom
$3,996 E8 93.0 114/56.5-53.5 Drawing
www.clarkefire.com
272No. 28.55 NM4-105.00
Tel +1-513-475-FIRE (3473) Fax +1-513-771-0726 Tel +44-1236-429946
Performance Curve No.
www.clarkefire.com
Fax +44-1236-427274 C

$3,996This E8
chapter contains
93.0
C13600 revQ
06DEC12
all information
97.0/48.5 465
Rated Powerrelated
26.00 to d, 68
86 bhp @ 2950 rpm Reference No.
Specifications and information contained in this brochure subject to change without notice.
64 kw @2950 rpm Version
16

$3,996diesel
E8engines
93.0 of all94.0/47 .0 272 28.55
types CLARK and NM engines.GENERAL ENGINE DATA 68
$3,996 E8 93.0 37.5 Type 272 28.55 4 Cycle; In-line; w

$5,062 E8 92.4 135/67.5 401 24.50

Aspiration
d Na
Bore and Stroke mm×mm
$5,062 E8 92.4 138/69.0-67.0Cylinder633 Liner Type27.05 Wet

$5,062 E8 92.4 117/58.5 414 24.50

Displacement
d, 68 L
Compression Ratio 1
$5,062 E8 92.4 114/57.0 Firing 252
Order 27.05 68 1

PUMP MOTORS
$5,062 E8 92.4 45.5 252 27.05
Combustion System Direc
Rotation Viewed from flywheel Counte
$4,657 E8 93.0 141/70.5 Valves498 Per Cylinder27.50 Intake :

$4,657 E8 93.0 145/72.0-68.5Valves324 29.73

lashes at cold
Intake mm
Exhaust mm
$4,657 E8 93.0 123/61.5 Ignition515 Type 27.50 68 Compre

$4,657 E8 93.0 120/60.0 Charge324 29.73

Air Cooling Type
68
Weight (Fuel Pump Configuration) kg
$4,657 E8 93.0 48.0 324(L*W*H)(Fuel
Dimension 29.73 Pump Configuration) mm
Flywheel/ Flywheel House Dimension 10"
st iron frames. Torque at rated RPM Continued on next page. N.m
EXHAUST SYSTEM
Exhaust Gas Temp. at max rating/power ℃
Exhaust Gas Flow at max output kg/h
Max. Allowable Back Pressure kpa
Minimum Exhaust Pipe Diameter page 35 DN

Air Cleaner Type

161
AIR INTAKE SYSTEM
Dry Type

CHAPTER 4
Air Flow m3/h
Air Inlet Restriction Dirty kpa
Air Inlet Restriction Clean kpa

DIESEL ENGINES
LUBRICATION SYSTEM
Oil Capacity (Only Engine)
[email protected] www.anc.sa
Max. Sump Oil Temp.
L
℃
Normal Operating Oil Pressure Range bars
Oil Pressure at Idle bar
COOLING SYSTEM
Coolant Capacity - Engine + Heat Exchanger L
Start Open ℃
 R
R

RE FIGHTING SYSTEM CO.,LTD

g Street, Changsha, Hunan, P.R.
China
Zip Code：410100
Tel +86-731-84091707
Fax: +86-731-84091727

20
5
1E

cooled; 4 Cylinder
ly
105×118
Dry
4.09

2 This section contains all information related to

ction
ckwise CLARKE engine, including details, technical data
huast :1
0.35～0.40 and equipments .
0.40～0.45
(Diesel)

510
1245x900x1075
E3
232

≤630
410
page 36
10
65

SECTION 1
posable
400
≤5
≤2.5

12
120
[email protected] www.anc.sa CLARKE ENGINES
2.5-4.5
≥1.2

15
72
 162 162 Pricestoand
Prices and specifications are subject specifications
change without
Prices are subject toare
notice.
and specifications change without
subject notice.
to change without no

® MODELS
JU4H-UF12 JU4H-UF22 JU4H-UF30 JU4H-UFH8 JU4H-UF40 JU4H-UF50
JU4H-UF14 JU4H-UFAB26 JU4H-UF32 JU4H-UFH0 JU4H-UF42 JU4H-UF52
FIRE PUMP ENGINES JU4H-UF10 JU4H-UF20 JU4H-UF24 JU4H-UF34 JU4H-UFH2 JU4H-UF58 JU4H-UF54

FM-UL-cUL
FM UL cUL APPROVED RATINGS BHP/KW
RATED SPEED US-EPA
JU4H (NSPS)
MODEL Available
1470 1760 2100 2350 2600 2800 3000 Until

UF10 41 31 51 38 55 41 12/31/10
UF12 55 41 59 44 12/31/10
UF14 70 52 71 53 12/31/13 +
UF20 60 45 67 50 72 54 12/31/10
UF22 72 54 75 56 12/31/10
UFAB26 80 60 12/31/13 +
UF24 80 60 83 62 12/31/13 +
UF30 64 48 79 59 85 63 12/31/10
UF32 85 63 85 63 12/31/10
UF34 104 78 115 86 12/31/12 +
UFH8 63 47 73 54 12/31/10
UFH0 73 54 88 66 98 73 12/31/10
UFH2 98 73 99 74 12/31/10
12/31/10
UF40 94 70 105 78 106 79 USA EPA (NSPS) Emissions Compliant. Applies to John
12/31/09
Deere model year per Table 4 of 40 CFR Part 60 Sub Part IIII.
UF42 106 79 106 79 12/31/09
All Models are available for Export
UF58 79 59 110 82 12/31/09
UF50 110 82 130 97 127 95 12/31/09 + Not Available in California
UF52 127 95 127 95 12/31/09 Less than 100HP
UF54 145 108 145 108 12/31/12 +
Greater than 99HP

SPECIFICATIONS
JU4H MODELS
ITEM
UF10/12/14 UF20/22/AB26/24 UF30/32/34 UFH8/H0/H2 UF40/42 UF58/50/52/54
Number of Cylinders 4
Aspiration NA T
Rotation* CW
Weight
g – lb ((kg)
g) 910 ((413)) 935 ((424))
Compression Ratio 17.6:1 17.0:1
Displacement – cu. in. (L) 275 (4.5)
Engine Type 4 Stroke Cycle – Inline Construction
Bore & Stroke – in. (mm) 4.19 x 5.00 (106 x 127)
Installation Drawing D534
Wiring Diagram AC C07591
Wiring Diagram DC C071590
Engine Series John Deere 4045 Series
Speed Interpolation OP T .

Abbreviations: CW – Clockwise NA – Naturally Aspirated T – Turbocharged

ENGINE RATINGS BASELINES
*Rotation viewed from Heat Exchanger / Front of engine
• Engines are to be used for stationary emergency standby fire pump service only. Engines
CERTIFIED POWER RATING are to be tested in accordance with NFPA 25.
• Each engine is factory tested to verify power and performance. • Engines are rated at standard SAE conditions of 29.61 in. (752.1 mm) Hg barometer and
• Although FM
FM-UL
UL ratings are shown at specific speeds,
speeds Clarke engines with optional 77°F ((25°C)
5 C) inlet
et aair te
temperature
pe atu e [app
[approximates
o ates 300 ft.t (9
(91.4 m)) abo
abovee sea level]
e e ] by tthee
speed interpolation can be applied at any intermediate speed. To determine the testing laboratory (see SAE Standard J 1349).
intermediate speed power; make a linear interpolation from the Clarke FM-UL power • A deduction of 3 percent from engine horsepower rating at standard SAE conditions shall
curve. Contact Clarke or your Pump OEM Representative to obtain details. be made for diesel engines for each 1000 ft. (305 m) altitude above 300 ft. (91.4 m)
• A deduction of 1 percent from engine horsepower rating as corrected to standard SAE
FM conditions shall be made for diesel engines for every 10°F (5.6°C) above 77°F (25°C)
ambient temperature.

page 37
WWW.ANC.SA
 40 3600 230/460 324TS Y1616 324TSTFPA14010 √ $5,537 E8 91.7 92.0/46.0 531 27.47 d
1800 230/460 324T Y1618 324TTFPA14071 √ $5,194 E8 93.0 100/50.0 583 28.97 d
50 3600 230/460 326TS Y1619 326TSTFPA14013 √ $6,581 E8 92.4 112/56.0 522 28.97 d
1800 230/460 326T Y1621 326TTFS14046 √ $6,055 E8 93.0 122/61.0 681 30.38 d
60 3600 230/460 364TS Y1622 364TSTFS14009 √ $7,481 E8 93.0 138/69.0 815 29.38 d
1800 R
230/460 364T Y1624 364TTFS14064 $7,629 E8 93.6 142/71.0 882 31.52
75 3600 230/460 365TS Y1625 365TSTFS14009 √ $10,254 E8 93.0 172/86.0 911 30.38 d
1800 230/460 365T Y1627 365TTFS14071 $9,293 E8 94.1 176/88.0 990 32.52
100 3600 230/460 405TS Y1628 405TSTFS14007 √ $13,469 E8 94.1 224/112 1103 34.13 d
1800 230/460 405T Y1630 ® 405TTFS14328 $11,851 E8 94.5 224/112 1234 37.13
MODELS
Catalog numbers (Cat No.) highlighted in JU4H-UF12 JU4H-UF22 JU4H-UF30 JU4H-UFH8 JU4H-UF40 Continued on next page..
JU4H-UF50
bold blue are EPAct efficient. JU4H-UF14 JU4H-UFAB26 JU4H-UF32 JU4H-UFH0 JU4H-UF42 JU4H-UF52
FIREareas
Blue shaded PUMPare ENGINES
cast iron frames. JU4H-UF10 JU4H-UF20 JU4H-UF24 JU4H-UF34 JU4H-UFH2 JU4H-UF58 JU4H-UF54

ENGINE EQUIPMENT
PUMP MOTORS

EQUIPMENT STANDARD OPTIONAL

Air Cleaner Direct Mounted, Washable, Indoor Service with Drip Shield Disposable, Drip Proof, Indoor Service Outdoor Type, Single or
Two Stage
Alternator 12V-DC, 42 Amps with Poly-Vee Belt and Guard 24V-DC, 40 Amps with Poly-Vee Belt and Guard
Exhaust Protection Blankets on UF10/12/14/20/22/AB26/24;
Metal Guards on Manifolds and Turbocharger on
UF30/32/34/H8/H0/H2/40/42/58/50/52/54
Coupling Bare Flywheel Listed Driveshaft and Guard, UF10/12/14, UF20/22/AB26/24 –
CDS10-SC; UF30/32/34, UFH8/H0/H2, UF40/42 – CDS20-SC;
UF58/50/52/54 – CDS30-S1
NEMA is a trademark of National Electrical Manufacturers Association.
Exhaust Flex Connection For NA Engines - Stainless Steel Flex, NPT(M) Connection, 3” For NA Engines – Stainless Steel Flex, NPT(M) Connection, 4” All Rights Reserved.
For T Engines – Stainless Steel Flex, NPT(M) Connection, 4” For T Engines - Stainless Steel Flex, 150# ANSI Flanged
164 Connection, 5” Prices and specifications are subject to change without notice.

Flywheel Housing SAE #3

Flywheel Power Take Off 11.5” SAE Industrial Flywheel Connection
Fuel Connections Fire Resistant, Flexible, USA Coast Guard Approved, Supply and Stainless Steel, Braided, cUL Listed, Supply and Return Lines
Return Lines
Fuel Filter Primary Filter with Priming Pump
Fuel Injection System Stanadyne Direct Injection
Engine Heater 115V-AC, 1000 Watt 230V-AC, 1000 Watt
Governor, Speed Constant Speed, Mechanical
Heat Exchanger Tube and Shell Type, 60 PSI (4 BAR), NPT(F) Connections –
Sea/Salt Water Compatible
Instrument Panel English and Metric, Tachometer, Hourmeter, Water Temperature,
Oil Pressure and Two (2) Voltmeters
Junction Box Integral with Instrument Panel; For DC Wiring Interconnection to
Engine Controller
Lube Oil Cooler Engine Water Cooled, Plate Type
Lube Oil Filter Full Flow with By-Pass Valve
Lube Oil Pump Gear Driven, Gear Type
Manual Start Control On Instrument Panel with Control Position Warning Light
Overspeed Control Electronic with Reset and Test on Instrument Panel
Raw Water Solenoid Operation Automatic from Fire Pump Controller and from Engine Instrument
Panel
Run – Stop Control On Instrument Panel with Control Position Warning Light
Run Solenoid 12V-DC Energized to Run 12V-DC Energized to Stop; 24V-DC Energized to Run; 24V-DC
Energized to Stop
Starters T w o (2) 12V-DC T wo (2) 24V-DC
Throttle Control Adjustable Speed Control, Tamper Proof
Water Pump Centrifugal Type, Poly-Vee Belt Drive with Guard

Abbreviations: DC –Direct Current,, AC – Alternatingg Current,, SAE – Societyy of Automotive Engineers,

g , NPT(F)
( ) – National Pipe
p Tapered
p Thread ((Female),
), NPT(M)
( ) – National
Pipe Tapered Thread (Male), NA – Naturally Aspirated, T- Turbocharged, ANSI – American National Standards Institute

Fire Protection Products, Inc. UK, Ltd.

3133 E. Kemper Rd., Cincinnati, Ohio 45241 Grange Works, Lomond Rd., Coatbridge, ML5-2NN
United States of America United Kingdom
Tel +1-513-475-FIRE (3473) Fax +1-513-771-0726 Tel +44-1236-429946 Fax +44-1236-427274
www.clarkefire.com www.clarkefire.com

C13600 revQ Specifications and information contained in this brochure subject to change without notice.
06DEC12

page 38
WWW.ANC.SA
R

page 39
WWW.ANC.SA
 R

 4</8(;,QWHUQDOFRPEXVWLRQ(QJLQHVIRU'ULYLQJ6WDWLRQDU\)LUH3XPSV_8/3URGXFWL4

4</8(;,QWHUQDOFRPEXVWLRQ(QJLQHVIRU'ULYLQJ
6WDWLRQDU\)LUH3XPSV
 4</8(;,QWHUQDOFRPEXVWLRQ(QJLQHVIRU'ULYLQJ6WDWLRQDU\)LUH3XPSV_8/3URGXFWL4

    

,QWHUQDOFRPEXVWLRQ(QJLQHVIRU'ULYLQJ6WDWLRQDU\)LUH3XPSV
-8+8).$7     

6HH*HQHUDO,QIRUPDWLRQIRU,QWHUQDOFRPEXVWLRQ(QJLQHVIRU'ULYLQJ6WDWLRQDU\)LUH3XPSV
-8+8).$7     

-8+8).$7
&/$5.(),5(3527(&7,21352'8&76/7'     (;
*5$1*(:25.6
-8+8)
/2021'5'     
&2$7%5,'*(0/1181,7('.,1*'20
/DVW8SGDWHGRQ
',(6(/(1*,1(65$7('$763(&,),&63(('6
5DWHG
1RRI 5DWHG 6SHHG
7KHDSSHDUDQFHRIDFRPSDQ\ VQDPHRUSURGXFWLQWKLVGDWDEDVHGRHVQRWLQLWVHOIDVVXUHWKDWSURGXFWVVRLGHQWLILHGKDYHEHHQPDQXIDFWXUHG
0RGHO &\OLQGHUV +3 USP
XQGHU8/ V)ROORZ8S6HUYLFH2QO\WKRVHSURGXFWVEHDULQJWKH8/0DUNVKRXOGEHFRQVLGHUHGWREH&HUWLILHGDQGFRYHUHGXQGHU8/ V)ROORZ8S
6HUYLFH$OZD\VORRNIRUWKH0DUNRQWKHSURGXFW
-8+8)   
8/SHUPLWVWKHUHSURGXFWLRQRIWKHPDWHULDOFRQWDLQHGLQWKH2QOLQH&HUWLILFDWLRQ'LUHFWRU\VXEMHFWWRWKHIROORZLQJFRQGLWLRQV7KH*XLGH
,QIRUPDWLRQ$VVHPEOLHV&RQVWUXFWLRQV'HVLJQV6\VWHPVDQGRU&HUWLILFDWLRQV
 ILOHV PXVWEHSUHVHQWHGLQWKHLUHQWLUHW\DQGLQDQRQPLVOHDGLQJ
 
PDQQHUZLWKRXWDQ\PDQLSXODWLRQRIWKHGDWD RUGUDZLQJV 7KHVWDWHPHQW5HSULQWHGIURPWKH2QOLQH&HUWLILFDWLRQV'LUHFWRU\ZLWKSHUPLVVLRQ
IURP8/PXVWDSSHDUDGMDFHQWWRWKHH[WUDFWHGPDWHULDO,QDGGLWLRQWKHUHSULQWHGPDWHULDOPXVWLQFOXGHDFRS\ULJKWQRWLFHLQWKHIROORZLQJ
  
IRUPDWŒ8///&
  

-8+8)   

  

  

-8+8) for more details

 about each model certificate
 contact 
[email protected]
  

-8+8)   

  

  

  

page 40
-8+8)   

WWW.ANC.SA   

  
 R
R

This section contains all information related to

NMFIRE engine, including technical data and me-
chanical drawings.

page 41

SECTION 2
[email protected] www.anc.sa NMFIRE ENGINES
 R

CNP NM FIRE FIGHTING SYSTEM CO.,LTD

Add：No.45 Xi Chong Road, Quan Tang Street,
DIESEL ENGINE Changsha, Hunan, P.R. China
Zip Code：410100
Tel +86-731-84091707

Engine Model NM4-105 Curve No. C04105 Date 2017/7/20

Displacement 4.09 L Aspiration Naturally Power Standard UL/FM

Bore 105 mm Cylinder Qty. 4 64 KW @ 2950 r/min

Stroke 118 mm Fuel System In-Line; Mechanical 86 HP @ 2950 r/min

100

80

64
60
KW

40

20

0
1800 2200 2350 2650 2950 3150

RPM

Torque Output Power Fuel Consumption

Speed Torque Speed Output Power Speed Consumption

RPM N-m lb-ft. RPM KW HP RPM g/KW-HR lb/BHP-HR
1800 1800 1800
2200 2200 2200
2350 0 2350 2350
2650 0 2650 2650
2950 232 171 2950 64 86 2950 242 0.398
3150 0 3150 3150

REV: A

CNP NM FIRE FIGHTING SYSTEM CO., LTD

Add：No.45 Xi Chong Road, Quan Tang Street, Changsha, Hunan, P.R. China 410100
Tel: + 86-731-84091707 Fax.:+86-731-84091727

page 42
WWW.ANC.SA
 R

CNP NM FIRE FIGHTING SYSTEM CO.,LTD

Add：No.45 Xi Chong Road, Quan Tang Street, Changsha, Hunan, P.R.

Engine Data Sheet China

Zip Code：410100
Tel +86-731-84091707
Fax: +86-731-84091727

Engine Modle NM4-105 Date 2017/7/20

Drawing No. NM4-105.00 Performance Curve No. C04105
https://iq.ulprospector.com/en/profile?e=142973 86 bhp @ 2950 rpm Reference No. 16DS001E 74/74
Rated Power
64 kw @2950 rpm Version A

GENERAL ENGINE DATA

Type 4 Cycle; In-line; water cooled; 4 Cylinder
Aspiration Naturally
Bore and Stroke mm×mm 105×118
Cylinder Liner Type Wet Dry
Displacement L 4.09
Compression Ratio 17:01
Firing Order 1-3-4-2
Combustion System Direct Injection
Rotation Viewed from flywheel Counter Clockwise
Valves Per Cylinder Intake :1 Exhuast :1
Intake mm 0.35～0.40
Valves lashes at cold
Exhaust mm 0.40～0.45
Ignition Type Compression(Diesel)
Charge Air Cooling Type N/A
Weight (Fuel Pump Configuration) kg 510
Dimension (L*W*H)(Fuel Pump Configuration) mm 1245x900x1075
Flywheel/ Flywheel House Dimension 10"/ SAE 3
Torque at rated RPM N.m 232
EXHAUST SYSTEM
Exhaust Gas Temp. at max rating/power ℃ ≤630
Exhaust Gas Flow at max output kg/h 410
Max. Allowable Back Pressure kpa 10
Minimum Exhaust Pipe Diameter DN 65
AIR INTAKE SYSTEM
Air Cleaner Type Dry Type, Disposable
Air Flow m3/h 400
Air Inlet Restriction Dirty kpa ≤5
Air Inlet Restriction Clean kpa ≤2.5
LUBRICATION SYSTEM
Oil Capacity (Only Engine) L 12
Max. Sump Oil Temp. ℃ 120
Normal Operating Oil Pressure Range bars 2.5-4.5
Oil Pressure at Idle bar ≥1.2
COOLING SYSTEM
Coolant Capacity - Engine + Heat Exchanger L 15
Start Open ℃ 72
Thermostat Range
Full Open ℃ 82
Coolant Pressure Cap bar 0.9
Max. Engine Coolant Temp. ℃ ≤95
page 43
WWW.ANC.SA
 Coolant Pressure Cap bar
Max. Engine Coolant Temp. ℃

CNP NM FIRE FIGHTING SYSTEM CO.,LTD

Add：No.45 Xi Chong Road, Quan Tang Street, Changsha, Hunan, P.R.

Engine Data Sheet 418mm

China
Zip Code：410100
259.

A
Tel +86-731-84091707
Fax: +86-731-84091727

Engine Coolant Flow at Full Load 861.6mm m3/h 7

Raw water 742.5mm
Min./Max. Raw Water Cooling Capacity outlet G3/4"
3
m /h 2.3~4.2
Min. /Max. Raw Water Pressure bar 1~3
Min.Raw Water Temp. ℃ 15.6
492mm
Raw Water Inlet G1/2〞
Raw Water Pipe Size
Raw Water Outlet G3/4〞
HEATER SYSTEM
Wattage W 1190
Voltage AC V 240
ELECTRICALBSYSTEM-DC 0.0 B
System Voltage(Nominal) V 24
Starter motor Kw 4.5
Recommended Battery Capacity AH 120
Cold Cranking Amperes @ -18℃ (0ͼF) CCA 638
Reserve Capacity (RC) Min 224
0.0
Charging Alternator Output Amps 27
Starter Cranking Amps, [email protected]℃（0°F） Left Side View
Amps 290
Min. Cranking Speed Required for Unaided Cold Start rpm 380
FUEL SYSTEM
Injection Pump In-line, Plunger type
Injection Advance Angle ° 18±1
Minimum Supply line Size mm 10

A
Minimum Return line Size mm 10
Fuel Management Control Mechanical 571mm
Fuel Consumption @2950rpm A g/kw.h 242
Idle Speed rpm 800
Max. Governed Speed rpm 3300
Maximum allowable fuel height above fuel pump m 2
Governed Speed Rate % ≤10
Engine Performance Data B
0.0 C
Estimated free field soud pressure level at 1 meter with full-load governed
speed(Includes Noise from: exhaust; Cooling System and Driven dBa 108
Components)

All data is based on the engine operating with fuel system, lubricating oil pump, air cleaner, and alternator; not
included are compressor, fan, optional equipment, and driven components.;Data is based on operation at SAE 325mm
standard J1394 conditions of 300ft (91,4m) altitude, 29.61 in.(752mm) Hg dry barometer, and 77ͼF (25ͼC) intake air
temperature, using 0# diesel fuel follow the standard GB 252-2011. 0.0
Altitude above which output should be Limited m (ft.) 91 (300)
Top View
Correction Factor per 305m.(1,000ft.) above Altitude Limit 3%
Temperature above which output should be Limited ͼC (ͼF) 25 (77)
Correction Factor per 5.6ͼC (10ͼF) above Temperature Limit 1%

Remark:
1.All daa certified within 5%；
2.TBD - To Be Determined；
3.N/A - Not Applicable;

page 44
WWW.ANC.SA
 0.9
≤95

418mm Datums:
418mm 259.5mm 259.5mm

A
259.5mm

A
C
418mm

C
A
C

861.6mm 861.6mm 861.6mm A Dimension face of flywheel 240.5mm

Raw water 240.5mm Raw waterRaw water
742.5mm
1004mm 742.5mm 742.5mm
outlet G3/4" outlet G3/4" B Engine horizontal center(crankshaft)
outlet G3/4"
C Engine vertical center(crankshaft)

492mm 492mm 492mm Notes:

1)Fuel supply piping minimum diameter inside
404mm from tank to engine must be ≥Ø10 .
2)Fuel return piping minimum diameter inside
from tank to engine must be ≥Ø10 .

B B B0.0 B Drawing subject to 0.0

change
B B B
B 0.0 0.0
0.0 0.0 without notice.

A:Exhaust Flange 330mm

330mm
0.0 0.0 0.0 0.0
0.0 DN65 (2.5")
Left Side View LeftView
Left Side Side View
Front View Front
Front View Right Side View

A
A
A

A
C
C
Scale 2:1
A
C

571mm 571mm 571mm

A A A

Flywheel housing SAE 3 Flywheel 10"

0.0 C B C C B BC
0.0 0.0 0.0
0.0 C

325mm 325mm 325mm

0.0 0.0 0.00.0 0.00.0

0.0 0.0
Top View Top ViewRear View
Top View Rear
Rear View Foot Mounting

REV

A
R
UNITS

MM
DR BY: DATE NAME PROJECTION:
INSTALLATION DRAWING
QW 04/15/2017
DIESEL FIRE PUMP DRIVER
CK BY: DATE MODEL NM4-105 A PROJECT CREATION
A CREATION QW PM 04/15/2017
LM PART No

APPROVED: DATE NM4-105-00 REVSCALE PAGEDESCRIPTION

OF
REV DESCRIPTION DWN APVD DATE
PL MATERIAL: NTS 1 1

page 45
WWW.ANC.SA
 R

Datums: Datums:Datums:

A
C

A
A Dimension face of flywheel A A
DimensionDimension face of flywheel
face of flywheel
240.5mm 240.5mm
1004mm 1004mm 1004mm
B Engine horizontal center(crankshaft) B B horizontal center(crankshaft)
Engine Engine horizontal center(crankshaft)
C Engine vertical center(crankshaft) C C vertical
Engine Engine vertical center(crankshaft)
center(crankshaft)

Notes: Notes: Notes:

1)Fuel
1)Fuel supply piping minimum diameter inside 1)Fuel supply supply
piping pipingdiameter
minimum minimuminside
diameter inside
404mm from tank to engine must be ≥Ø10 . 404mm from404mm from tank to engine must be ≥Ø10 .
tank to engine must be ≥Ø10 .
2)Fuel
2)Fuel return piping minimum diameter inside 2)Fuel return return
piping piping diameter
minimum minimuminside
diameter inside
from tank to engine must be ≥Ø10 . from
from tank to tank to
engine engine
must must. be ≥Ø10 .
be ≥Ø10

Drawing subject to change DrawingDrawing

subjectsubject to change
to change
B B
0.0 0.0 0.0 without notice. 0.0 withoutwithout
0.0
notice.notice.

330mm 330mm A:Exhaust Flange A:Exhaust

A:Exhaust Flange Flange
0.0 DN65 (2.5") DN65 (2.5")
DN65 (2.5")
0.0

nt View
ght
w Side View Right Right Side View
Side View

Scale 2:1
A
C

Scale 2:1 Scale 2:1

A

Flywheel housing SAE 3 Flywheel

FlywheelFlywheel
housinghousing
10" Flywheel
SAE 3 SAE 3 Flywheel 10" 10"

0.0 0.0C C

0.0 0.0 0.0

ear
ew
ot View
Mounting Foot Mounting
Foot Mounting

REV REV
REV

A A
A
R
R
UNITS UNITS
R
UNITS

MM MM
MM
DR BY: DATE
NAME NAME PROJECTION:
DR BY: DATE PROJECTION:
DR BY: DATE NAME PROJECTION:
INSTALLATIONINSTALLATION
DRAWING DRAWING
INSTALLATION DRAWINGQW QW
04/15/2017 04/15/2017
QW 04/15/2017 DIESEL FIRE DIESEL
PUMPFIRE PUMP DRIVER
DRIVER
DIESEL FIRE PUMP DRIVER PROJECT
CK BY:
CK BY: PROJECT
DATE MODEL NM4-105
MODEL NM4-105 PROJECT
A CREATIONCKCREATION QWMODEL04/15/2017
NM4-105
PM 04/15/2017 DATE
QW A
BY: DATE
PM 04/15/2017 QW PART NoPM LM PART No
LM LM PART No

NM4-105-00NM4-105-00 SCALE SCALE PAGE OF

DWNNM4-105-00
APPROVED: DATE PAGE OF
REV REV DESCRIPTIONDESCRIPTION
APPROVED: DATE
DWN APVD APVD
DATE DATE SCALEDATE PAGE
APPROVED: OF
DWN APVD DATE PL PL MATERIAL:
NTS NTS
1 1 1 1
PL MATERIAL: NTS 1 MATERIAL:
1

page 46
WWW.ANC.SA
 R

9/23/2020 QYLU.EX26721 - Internal-combustion Engines for Driving Stationary Fire Pumps | UL Product iQ

QYLU.EX26721 - Internal-combustion Engines for

Driving Stationary Fire Pumps

Internal-combustion Engines for Driving Stationary Fire Pumps

See General Information for Internal-combustion Engines for Driving Stationary Fire Pumps

CNP NM FIRE FIGHTING SYSTEM CO LTD EX26721

Factory Area of CNP Changsha Co Ltd
No.45 Xi Chong Road
Quan Tang Street, Changsha ETDZ
Changsha, Hunan 410100 CHINA

DIESEL ENGINES RATED FOR USE WITHIN SPEED RANGES

Minimum Maximum
Rated Rated
No. of Speed Rated Speed Rated
Model Cylinders (rpm) HP (rpm) HP

NM6-114 6 1500 219 1760 255

1760 255 1900 268

1900 268 2100 280

NM6-128 6 1500 400 1760 457

1760 457 1900 460

1900 460 2020 426

NM6-102B 6 1760 101 2100 123

2100 123 2350 134

2350 134 2650 148

2650 148 2980 153

NM6-114B 6 1470 244 1760 280

1760 280 2100 305

NM12-159 12 1540 1036 1760 1207

NM6-114C 6 1470 194 1760 221

1760 221 2100 248

NM6-128B 6 1470 346 1760 396

1760 396 2100 412

NM8-128 8 1470 447 1760 483

https://iq.ulprospector.com/en/profile?e=233848 1/2

page 47
WWW.ANC.SA
 R

9/23/2020 QYLU.EX26721 - Internal-combustion Engines for Driving Stationary Fire Pumps | UL Product iQ

1760 483 2100 496

NM12-128 12 1470 688 1760 744

1760 744 2100 759

Rated
No. of
Rated Speed
Cylinders
Model HP (rpm)

NM4-90 4 51 2950

NM4-105 4 86 2950

NM6-102 6 126 2950

NM4-108 4 94 2950

NM6-110D 6 268 2900

NM4-108B 4 121 2950

NM6-110B 6 153 2950

Trademark and/or Tradename: "NM FIRE", ,

Last Updated on 2020-03-31

The appearance of a company's name or product in this database does not in itself assure that products so identified have been
manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered
under UL's Follow-Up Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-
misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory
with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice
in the following format: "© 2020 UL LLC"

https://iq.ulprospector.com/en/profile?e=233848 2/2

page 48
WWW.ANC.SA
KWWSVLTXOSURVSHFWRUFRPHQSURILOH"H  

KWWSVLTXOSURVSHFWRUFRPHQSURILOH"H  

This chapter contains all information related to

control panels of all types electric, jockey and
diesel control panels.

page 49

CHAPTER 4
[email protected] www.anc.sa CONTROL PANELS
 R

Technical Data
Model GPY Electric Fire Pump Controller

3L3 1M T3
From normal
3L2 T2
incoming power through
Disconnecting Means 3L1 T1

(IS/CB)*
M
CR4
1M 2M T5
CR5 1S T4
2M
T6
CR5 2M
3L1
1S
1S

3L2

Built to NFPA 20 (latest edition)

• UL218 - Fire Pump Controllers
Underwriters Laboratory (UL)
• CSA C22.2 No. 14 Industrial Control Equipment
Standard,
FM Global Class 1321/1323
New York City Accepted for use in the City of New York by the Department of Buildings
See page 7 for details
Optional
CE Mark Various EN, IEC & CEE directives and standards
Protection Rating
Standard: NEMA 2 (IP31)
Optional
NEMA 12 NEMA 4X-304 sst painted IP54
NEMA 3 IP55
Enclosure NEMA 3R NEMA 4X-316 sst painted IP65
NEMA 4 IP66

• Bottom entry gland plate • Red RAL3002

• Lifting Lugs • Powder coating
• Keylock handle

Shortcircuit 200V to 208V 220V to 240V 380V to 416V 440V to 480V 575V to 600V
Withstand 60Hz 60Hz 50 Hz / 60Hz 60Hz 60Hz
Rating
HP (kw)

5-150 (3.7 - 110) 5-200 (3.7 - 147) 5-300 (3.7 - 220) 5-450 (3.7 - 335) n/a

200 (147) 250 (184) 350 - 450 (257 - 335) 500 (373) 5-500
n/a n/a n/a n/a (3.7- 373)

*Please see Disconnecting Means details on page 3

page 50
This is a Marketing document. Please consult factory if additional information is required.
WWW.ANC.SA
February 2019
Manufacturer reserves the right to modify this information without notice 2
 R

Technical Data
Model GPY Electric Fire Pump Controller

Standard: Optional:
Temperature 4°C to 40°C / 39°F to 104°F 4°C to 55°C / 39°F to 131°F
Rating
Controllers built in Dubai, UAE (Tornatech FZE) are supplied standard with 55°C rating.
Surge
Surge arrestor rated to suppress surges above line voltage
Suppression
• Isolating switch and circuit breaker assembly:
- Door interlocked in the ON position
- Isolating switch rated not less than 115% of motor full load current
Disconnecting
- Circuit breaker continuous rating not less than 115% of motor full load current
Means
- Overcurrent sensing non-thermal type, magnetic only
- Instantaneous trip setting of not more than 20 times the motor full load current

Service Entrance
Suitable as service entrance equipment
Rating

Emergency Start • Flange mounted • Integrated limit switch

Handle • Pull and latch activation • Across the line start (direct on line)

• Operate shunt trip to open circuit breaker • Trip between 8 and 20 seconds
Protector • Factory set at 600% of motor full load current

Electrical • Voltage phase to phase (normal power)

Readings • Amperage of each phase when motor is running
Pressure • Continuous system pressure display
Readings • Cut-in and Cut-out pressure settings
• Pressure readings with date stamp
• Event recording with date stamp
Pressure and
• Under regular maintained operation, events are stored in memory for the life of the controller.
Event recorder
• Data viewable on operator interface display screen
• Downloadable by USB port to external memory device
• Pressure transducer and run test solenoid valve assembly for fresh water application
• Pressure sensing line connection 1/2” Female NPT
Pressure Sensing • Drain connection 3/8”
• Rated for 0-500PSI working pressure (standard display at 0-300PSI)
• Externally mounted with protective cover

page 51
WWW.ANC.SA
This is a Marketing document. Please consult factory if additional information is required.
February 2019 Manufacturer reserves the right to modify this information without notice 3
 R

REV. DESCRIPTION DD/MM/YY

page 52
WWW.ANC.SA
R

REV. DESCRIPTION DD/MM/YY

page 53
WWW.ANC.SA
 R

CERTIFICATE OF COMPLIANCE
Certificate Number 20140708-EX3971
Report Reference EX3971-20061111
Issue Date 2014-JULY-08

Issued to: TORNATECH INC

132
7075 PLACE ROBERT-JONCAS
ST LAURENT
QC H4M 2Z2 CANADA

This is to certify that PUMP CONTROLLERS, FIRE

representative samples of Fire Pump Controllers, Models GPL, GPA, GPP, GPR,
GPS, GPV, GPY, and GPW.

Transfer Switches, Models GLU and GPU

Have been investigated by UL in accordance with the

Standard(s) indicated on this Certificate.

Standard(s) for Safety: See Addendum Page

Additional Information: See the UL Online Certifications Directory at
www.ul.com/database for additional information

Only those products bearing the UL Listing Mark for the US and Canada should be considered as
being covered by UL's Listing and Follow-Up Service meeting the appropriate requirements for US
and Canada.
The UL Listing Mark for the US and Canada generally includes: the UL in a circle symbol with “C” and
“US” identifiers: the word “LISTED”; a control number (may be alphanumeric) assigned by UL;
and the product category name (product identifier) as indicated in the appropriate UL Directory.

Look for the UL Listing Mark on the product.

William R. Carney, Director, North American Certification Programs

UL LLC

Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at www.ul.com/contactus

page 54
WWW.ANC.SA
 R
R

This section contains all information related to

jockey control panel , including technical data
and drawings.

page 55

SECTION 2
[email protected] www.anc.sa
JOCKEY CONTROL PANEL
 R

Technical Data
Model JP3 Jockey Pump Controller

Underwriters Laboratory (UL) UL508A - Industrial Pump Controllers

CSA CSA C22.2 No. 14 Industrial Control Equipment
New York City Accepted for use in the City of New York by the Department of Buildings
See page 4 for details
Optional
CE Mark Various EN, IEC & CEE directives and standards
Protection Rating
Standard: NEMA 2 (IP31)
Optional
NEMA 12 NEMA 4X-304 sst painted
NEMA 3
Enclosure
NEMA 3R NEMA 4X-316 sst painted
NEMA 4

• Wall mounting lugs ( x4) • Red RAL3002

• Powder coating

page 56
WWW.ANC.SA
 R

Technical Data
Model JP3 Jockey Pump Controller

• Main disconnect – padlockable – rotary type handle – door interlocked

Fuseless Motor
• Thermo-magnetic motor protector
Starter
• Contactor
Control Circuit • 24V.AC
• Solid state controls
iPD+ Operator
• All adjustments on door front
• Navigation pushbuttons
• Pressure transducer for fresh water application 316 stainless steel construction
Pressure Sensing • Rated for 0-600psi working pressure
• Pressure sensing line connection ¼” Male NPT
• Manual motor start/run LED
• Automatic motor start/run LED
• Motor overload
• Pressure reading
• Start pressure
• Stop pressure
• System pressure
• System pressure diagnostic LED’s
• Green: system pressure at or above stop pressure
• Yellow: system pressure between start and stop pressure
• Red: system pressure at or below start pressure
• AUTO mode
• OFF mode

Timers • Delay start timer (on delay)

• Visual countdown
• Pump start counter
Counters
• Elapsed timer meter (hours / non-resettable)
• OFF-AUTO pushbutton
Operators
• Start and Stop pushbutton
Automatic Start Start on pressure drop

Manual Start Start pushbutton

Operation
Stopping Stop pushbutton
Field adjustable &
Timers
visual countdown • Delay start timer (on delay)

page 57
WWW.ANC.SA
 R

CERTIFICATE OF COMPLIANCE
Certificate Number 20190612-E158750
Report Reference E158750-19940223
Issue Date 2019-JUNE-12

Issued to: TORNATECH INC

4100 Desserte Sud, (A-440 Ouest)
Laval
QC H7T 0H3 CANADA

This certificate confirms that INDUSTRIAL CONTROL PANELS

representative samples of Includes Jockey Pump Controller Models JP1, JP2, JP3,
JPY, JPD, DJP, and DJD; Remote Alarm Panel Models
APE, APEE, APD, APDD, and APED; Low Level Lockout
Panel Model LPL; and Low Suction Pressure Shutdown
Panel Model LPS. These models are not exhaustive.

Have been investigated by UL in accordance with the

Standard(s) indicated on this Certificate.

Standard(s) for Safety: UL 508A, Industrial Control Equipment

CSA C22.2 No. 14-13, Industrial Control Equipment
Additional Information: See the UL Online Certifications Directory at
https://iq.ulprospector.com for additional information.

This Certificate of Compliance does not provide authorization to apply the UL Mark. Only the UL Follow-Up
Services Procedure provides authorization to apply the UL Mark.

Only those products bearing the UL Mark should be considered as being UL Certified and covered under UL’s
Follow-Up Services.

Look for the UL Certification Mark on the product.

Bruce Mahrenholz, Director North American Certification Program

UL LLC

Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/

Page 1 of 1

page 58
WWW.ANC.SA
 R
R

This section contains all information related to

diesel engine control panel , including data
sheets, dimensional data, wiring schematics, and
field

page 59

SECTION 3
[email protected] www.anc.sa
DIESEL ENGINE CONTROL PANEL
 R

Technical Data
Model GPD Diesel Fire Pump Controller

Built to NFPA 20 (latest edition)

• UL218 - Fire Pump Controllers
Underwriters Laboratory (UL)
• CSA C22.2 No. 14 Industrial Control Equipment
Standard,
FM Global Class 1321/1323
New York City Accepted for use in the City of New York by the Department of Buildings
See page 5 for details
Optional
CE Mark Various EN, IEC & CEE directives and standards
Protection Rating
Standard: NEMA 2 (IP31)
Optional
NEMA 12 NEMA 4X-304 sst painted IP54
NEMA 3 IP55
Enclosure NEMA 3R NEMA 4X-316 sst painted IP65
NEMA 4 IP66

• Bottom entry gland plate • Red RAL3002

• Lifting Lugs • Powder coating
• Keylock handle

Standard
4°C to 40°C / 39°F to 104°F
Temperature Optional
Rating 4°C to 55°C / 39°F to 131°F
Controllers built in Dubai, UAE (Tornatech FZE) are supplied standard with 55°C rating.

AC 120V / 1ph / 60hz

208V to 240V / 1ph / 50-60hz

DC 12VDC
General 24VDC
Grounding system • Negative
• Two independent fully automatic
Battery chargers • 10A continuous charge
• 500mA trickle charge
• Battery 1 & Battery 2 voltage
Electrical Reading • Battery 1 & Battery 2 charging amperage
• Charging mode
• Continuous system pressure display
Pressure Reading
• Cut-in and cut-out pressure setting
• Pressure readings with date stamp
• Event recording with date stamp
Pressure and
• Under regular maintained operation, events are stored in memory for the life of the controller.
Event Recorder
• Data viewable on operator interface display screen
• Downloadable by USB port to external memory device

page 60 This is a Marketing document. Please consult factory for more information.
February 2019 2
Manufacturer reserves the right to modify this information without notice
WWW.ANC.SA
 R

Technical Data
Model GPD Diesel Fire Pump Controller

• Pressure transducer and run test solenoid valve assembly for fresh water application
• Pressure sensing connection 1/2” Female NPT
Pressure sensing • Drain connection 3/8”
• Rated and calibrated for 0-500psi working pressure
• Externally mounted with protective cover
4” alarm bell - 85 dB at 10ft. (3m)
• Engine run • Periodic test
• Main switch AUTO • Cranking Cycle
• Main switch in OFF • AC Power available
• Main switch in HAND • Pump room temperature (ºF or ºC)

Visual only
• Pump room trouble • Loss of continuity 1 • High pump room temperature
• Pump on demand • Loss of continuity 2 • ECM warning
• AC Failure • High fuel level • Weekly test cut-in not reached
• Charger 1 Failure • Fuel tank leak • Check weekly test solenoid
• Charger 2 Failure • PLD low suction pressure • Pressure transducer fault
• Weak battery 1 • High raw water temperature • Invalid Cut-In
• Weak battery 2 • Low pump room temperature • Service required
• Battery 1 overvoltage
• Battery 2 overvoltage

Visual and Audible

• Engine trouble • Battery 1 Failure
• Controller trouble • Battery 2 Failure
• Engine low oil pressure • Engine fail to start
• Engine high temperature • Low fuel level
• Engine low temperature • ECM fault
• Engine overspeed • ECM SS in Alternate Position
• DC Failure • Fuel injection malfunction

DPDT-8A-250V.AC
• Engine run
• Common controller trouble
• Charger #1 & Charger #2 failure • Pressure transducer fault
• Common engine trouble
• High engine temperature • Battery #1 & battery #2 failure • Overspeed
• Fail to start • DC failure • Fail when running
• Fuel injection malfunction** • Loss of continuity (starter) #1 and/or #2 • Low oil pressure
Contacts
• ECM selector switch in alternate position*** • PLD low suction pressure

• Low fuel level • Low pump room temperature • AC Failure

• High fuel level • High pump room temperature
• Fuel tank leak
• H-O-A selector switch in OFF or HAND

**Applicable to electronic engines only.

*** Applicable to electronic engines only. Alarms when ECM selector switch on the engine is in alternate mode.

page 61
This is a Marketing document. Please consult factory for more information.
February 2019 Manufacturer reserves the right to modify this information without notice WWW.ANC.SA
3
 R

Technical Data
Model GPD Diesel Fire Pump Controller

• Low fuel level

Terminals for
• Remote AUTOMATIC start
Field Connections
• Deluge valve start (re-assignable)
for External
• Fuel tank leak (re-assignable)
Devices
• High fuel level (re-assignable)
• Embedded microcomputer with software PLC logic
ViZiTouch V2 • 7.0” color touch screen (HMI technology)
• Upgradable software
• Multi-language

Selector Switch
• Behind lockable and breakable cover
• Start on pressure drop
• Remote start signal from automatic device
• Crank 1 and Crank 2 start pushbuttons
• Run test pushbutton
Manual Start
• Deluge valve start
• Remote start from manual device
• 6 consecutive cycle attempts
• 3 X 15s crank from battery 1 or 2 alternatively
Operation • 15s rest in between each crank attempt
• Manual with Stop pushbutton
Stopping
• Automatic after expiration of minimum run timer ****

Timers • Sequential start timer (on delay)

Visual Countdown
• Periodic test timer
• Pressure
• Non-pressure
• Automatic
Mode
• Non-automatic
• Protocol: Modbus
Communication
• Connection type: Shielded female connector RJ45
Protocol
• Frame Format: TCP/IP
• Addresses: See bulletin MOD-GPD

Automatic Start Manual or Remote Start Run Test or Periodic Test

High Coolant Alarm only Alarm only Shutdown
shutdown
schedule Low Oil Pressure Alarm only Alarm only Shutdown
Overspeed Shutdown Shutdown Shutdown

Wall Mount Floor Mount

Approx. shipping Approx. shipping
Approx. Shipping Approx. Shipping
Starting Voltage dimensions in inches dimensions in inches
Weight in Lbs (kg) Weight in Lbs (kg)
(mm) (mm)

12V.DC
32" l x 29" w x 16" h 32” l x 29” w x 26” h
85 (39) 115 (52)
(813 x 737 x 407 ) (813 x 737 x 661)
24V.DC

**** Automatic shutdown shall be approved by the AHJ.

page 62
This is a Marketing document. Please consult factory for more information.
WWW.ANC.SA
February 2019
Manufacturer reserves the right to modify this information without notice 4
R

CERTIFICATE OF COMPLIANCE
Certificate Number 20140708-EX3971
Report Reference EX3971-20030507
Issue Date 2014-JULY-08

Issued to: TORNATECH INC

132
7075 PLACE ROBERT-JONCAS
ST LAURENT
QC H4M 2Z2 CANADA

This is to certify that PUMP CONTROLLERS, FIRE

representative samples of GPD Series controller for engine-driven centrifugal fire
pumps

Have been investigated by UL in accordance with the

Standard(s) indicated on this Certificate.

Standard(s) for Safety: UL218, Fire Pump Controllers

UL508, Industrial Control Equipment
CSA C22.2 No. 263-09, Fire Pump Controllers
CAN/CSA C22.2 No. 14-13, Industrial Control Equipment
NFPA20 (2010), Installation of Stationary Pumps for Fire
Protection
Additional Information: See the UL Online Certifications Directory at
www.ul.com/database for additional information

Only those products bearing the UL Listing Mark for the US and Canada should be considered as
being covered by UL's Listing and Follow-Up Service meeting the appropriate requirements for US
and Canada.
The UL Listing Mark for the US and Canada generally includes: the UL in a circle symbol with “C” and
“US” identifiers: the word “LISTED”; a control number (may be alphanumeric) assigned by UL;
and the product category name (product identifier) as indicated in the appropriate UL Directory.

Look for the UL Listing Mark on the product.

William R. Carney, Director, North American Certification Programs

UL LLC

Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at www.ul.com/contactus

page 63
WWW.ANC.SA
 R

This chapter contains all information related to

accessories of all types electric, air release valve,
pressure guage and diesel tank.

page 64

CHAPTER 6
[email protected] www.anc.sa ACCESSORIES
 R
R

This section contains all information related to Air

Release Valve , including specification, material,
sheets, capacity , technical data and certificate.

page 65

SECTION 1
[email protected] www.anc.sa
AIR RELEASE VALVE
 R

Series 34
Fire Protection System
Air Release Valve
• Ductile Iron Body
• Stainless Steel Trim and Float
• Easily serviced without removal from pipeline
• Available Pressure Ratings: 175 and 300
• Engineered for drip tight seal at low pressures

Cla-Val Series 34 Fire Protection System Air Release Valves are

designed to vent entrained air that collects at high points in a pipeline.
This valve continuously eliminates air from a system by releasing small
quantities of air before large air pockets can occur. In many installations,
continuing accumulations of air in the pipeline (lacking air release
valves); cause flow capacity to slowly decrease; power consumption
slowly increases; un-noticeable at first, until flow drops dramatically,
Installation even stopping due to air blocks in the piping.
Series 34 Fire Protection System Air Release Valves are
typically installed at high-points in pipelines and at regular Another problem resulting from excessive air accumulation is
intervals, of approximate 1/2 mile, along uniform grade line unexplained pipeline rupture. These ruptures are passed off as the result
pipe. of ground settling or defective pipe, Where as in reality its large air
pockets that greatly increase pressure surges (normally occurring) when
Mount the unit in the vertical position on top of the pipeline flow stops and starts causing the rupture. During normal pipeline
with an isolation valve installed below each valve in the event operation, air accumulation at the high point will displace the liquid within
servicing is required. A vault with adequate air venting and the air valve and lower the water level in relation to the float. As level of
drainage is recommended. the liquid lowers, where the float is no longer buoyant, the float drops and
opens the valve orifice seat and permitting accumulated air to be
Note: exhausted to atmosphere. After air is released, the liquid level in the air
Vacuum check valves can be supplied on the discharge of all valve rises and closes the valve orifice seat. This cycle automatically
size air release valves to prevent air re-entering the system; during repeats as air accumulates inside the air release valve, thereby preventing
negative pressure conditions the formation of air pockets.

Purchase Specifications Product Specifications

The fire protection system air release valve shall be of the
Sizes Materials
float operated, simple lever or compound lever design, and
1/2", 3/4", 1" Body and Cover:
capable of automatically releasing accumulated air from a
fluid system while the system is pressurized and operating. Ductile Iron ASTM 536 65-45-12
Pressure Ratings (see note)
An adjustable designed orifice button shall be used to seal 175 UL/FM Float:
the valve discharge port with drip-tight shut-off. The orifice 300 UL/FM Stainless Steel
diameter must be sized for use within a given operating
pressure range to insure maximum air venting capacity. Temperature Range Internal Parts:
Water to 180°F Stainless Steel
The float shall be of all stainless steel construction and
guaranteed to withstand the designed system surge pressure Note: Specify when operating Seal:
without failure. The body and the cover shall be ductile iron pressure below 10 PSI Viton or Buna-N® (Standard)
TM

and valve internal parts shall be stainless steel and Viton or TM

Buna-N® (standard)for water tight shut-off.

The air release valve shall be manufactured per ANSI/AWWA

C512-04 Series 34 from Cla-Val in Newport Beach, CA, USA.

page 66
WWW.ANC.SA
 R
R

This section contains all information related to

pressure gauge , including features, typical use,
ordering code , dimensions and certificate.

page 67

SECTION 2
[email protected] www.anc.sa
PRESSURE GAUGE
 R

Data Sheet
1005P XUL Fire Protection Sprinkler Service Gauge

FEATURES
Power Flex ™ movement provides superior
resistance to shock, vibration and pulsation
TrueZero ™ reduces reading errors by using
a “zero box” instead of convential dial pins
Water or Air gauges available for wet/dry
Heat-resistant polycarbonate push-in window
Custom dials available

TYPICAL USES
Fire Sprinklers for water or air systems

1005P XUL
3½˝ dial size

SPECIFICATIONS KEY BENEFITS

Accuracy: ±3-2-3% of span (ASME B40.100 Grade B) • Single scale, dual scale and triple scale
Sizes: 3½˝ dials available (bar, kPa, psi)
Ranges: Single, dual or triple scale • Corrosion resistant ABS case
0-300 psi (water)
0-80 psi retard to 250 psi (air) • Custom Dials available
0-600 psi
Process Connection
Location: Lower

Process Connection MIN/MAX TEMPERATURE LIMITS

1
⁄ 4 NPT
Size: Version Ambient Process Storage

Dial: Black figures on white background 1005P XUL -40°F to 150°F -40°F to 150°F -40°F to 150°F
(-40°C to 65°C) (-40°C to 65°C) (-40°C to 65°C)
Pointer: Black, aluminum
Weather Protection: Weather resistant
Movement: PowerFlex ™ with Brass/polyester segment
Approvals: UL 393 listed for fire protection sprinkler service
UL Canada listed
FM approved
WETTED COMPONENTS
Bourdon Tube Process Connection
Bronze Brass
NON-WETTED COMPONENTS
Case Window
ABS (Polycarbonate blend) Polycarbonate

page 68 1 of 3
All specifications are subject to change without notice. ashcroft.com
WWW.ANC.SA
All sales subject to standard terms and conditions. [email protected]
©2018 Ashcroft Inc. 1005p-xul_gauge_ds1.0_Rev B., 11/18 1.800.328.8258
 R
R

This section contains all information related to

Fuel Tank , including specification, material,
capacity and components.

page 69

SECTION 3
[email protected] www.anc.sa
FUEL TANK
 R

$5,)$/1$+',&2/7'),5(38036
SINGLE WALL FUEL TANKS WITH FITTINGS

19
2
17

16
DIESEL FUEL TANKS:
15
1. Tanks are constructed and labeled in accordance with UL-142.
10 1
18 2. Fittings shown are consistent with N.F.P.A. 30 and UL-142.
7 21
3. Tank to be pitched toward drain 1/4” per foot with outlet on the same elevation
20 as engine fuel pump. Means of elevating tank (by others) may be required.
21 4. Usable tank volume is total capacity less 5・ for sump and 5・ for expansion.
3 5 9
8

C D E E F 6"

12 "A" DIA.
22

14

L
13
2" NPT CPLGS. FOR
CUST. FURN. LEGS H

4 G
B FUEL SUPPLY

FUEL RETURN 14

NOMINAL USABLE
TANK SIZE VOLUME A B C D E F G H L Z
IN GALLONS IN GALLONS
119 105 24 (609) 61 (1548) 6 (152) 6 (152) 6 (152) 12 (304) 37 (939) 14 (355) 3 (76) 4
187 165 30 (761) 61 (1548) 6 (152) 6 (152) 6 (152) 12 (304) 37 (939) 16 (406) 3 (76) 4
300 270 38 (964) 61 (1548) 6 (152) 6 (152) 6 (152) 13 (330) 37 (939) 23 (584) 3-3/4 (95) 4
359 320 36 (914) 73 (1853) 6 (152) 6 (152) 6 (152) 18 (457) 44 (1117) 23 (584) 3-3/4 (95) 4
572 515 48 (1218) 73 (1853) 6 (152) 6 (152) 6 (152) 19 (483) 44 (1117) 30 (761) 4-3/4 (121) 4
849 766 64 (1626) 61 (1548) 6 (152) 6 (152) 6 (152) 24 (610) 44 (1117) 30 (761) 4-3/4 (121) 4
1100 993 64 (1626) 79 (2007) 6 (152) 6 (152) 6 (152) 31 (787) 44 (1117) 30 (761) 4-3/4 (121) 4

COMPONENTS FURNISHED BY OTHERS COMPONENTS FURNISHED BY Fire Guard

ITEM NO. QTY. REQ’D DESCRIPTION ITEM NO. QTY. REQ’D DESCRIPTION
20 1 “Z” Diameter Piping for Vent 1 1 2” NPT Lockable Fuel Cap
21 1 1/2” Tubing and Fittings or 2 1 2” Screened Tank Vent
1/2” Black Pipe 3 1 Fuel Gauge 1-1/2” NPT
22 1 3/4” Tubing and Fittings or 4 1 1” NPT Drain Plug
3/4” Black Pipe 5 1 2” NPT Pipe Plug
NOTES 7 1 1/2” Tee
1. All dimensions are in inches and may vary ± 1/4”. 8 1 1/2” Close Nipple
2. Components shown are shipped loose for field assembly.
3. Illustration is for component identification only. Actual installation must
9 1 2” Fuel Fill Pipe
meet local codes and all applicable standards. 10 1 “Z” x “Z” x 2” Tee
4. Item 10 may consist of a combination of fittings. 11 1 “Z” Coupling
5. Refer to Section 916 page 259 for details of Fire Guard-furnished
12 1 3/4” NPT Lockable Fuel Valve
components.
6. Items 11 & 17 not required for 515 gallon tanks. 13 1 3/4” Close Nipple
14 2 Fuel Hoses for Supply & Return
(Furnished by Engine Mfr.)
15 1 2” Street Elbow
16 1 “Z” x “Z” x 2” Tee
17 1 “Z” Close Nipple
18 1 2” x 6” Nipple
19 1 “Z” Emergency Vent

page 70
WWW.ANC.SA
 R

ٌ
‫وﺧﺪﻣﺎت ﻣﺘﻤﻴﺰة‬ ٌ
.. ‫ﻋﺎﻟﻴﺔ‬ ٌ
‫ِﻋﺘﻤﺎدﻳﺔ‬
‫ا‬

Contact Us
Saudi Arabia, Riyadh, Al Olaya,
Al Olaya Main street ‫ ﺷﺎرع اﻟﻌﻠﻴﺎ اﻟﻌـــﺎم‬- ‫اﻟﻌﻠﻴﺎ‬
Email : [email protected]
[email protected] :
Phone : + 966 90 002 5873 + 966 92 002 5873
Riyadh Jeddah Dammam Qassim Khamis Mushait Jazan
Mobile : + 966 53 121 1473 Mobile : + 966 55 995 4807 Mobile : + 966 53 222 3872 Phone : +966554069992 Phone : + 966 55 972 5976 Phone : + 966 50 948 7834
Phone : + 966 11 291 5747 Phone : + 966 12661 0736 Phone : + 966 13 831 2238 E-mail : [email protected] E-mail : [email protected] E-mail : [email protected]
E-mail : [email protected] E-mail : [email protected] E-mail : [email protected]