TECHNICAL
DATA SHEET
REVISION | 01-02-2024
BOSS® PU CONSTRUCTION SEALANT
TECHNICAL DATA
Basis Polyurethane
Consistency Stable paste
Curing System Moisture curing
Density (g/ml) 1.20 ± 0.06
Skin Formation Time* (23°C/50% R.H.) (min) 30-90
Curing Rate * (23°C/50% R.H.) (mm/24 hours) 2-3
Slump (mm) None (or) <3
Hardness, Shore A, Points** (ISO 868) 35 ± 10
Tensile Strength**, (N/mm ) (ISO 37)
2
2.0 ± 0.5
Elasticity modulus 100% (N/mm2) (ISO 37) 0.38
Elongation at break** (%) (ISO 37) >600
Temperature Resistance** (°C) -30 → 90
Application temperature (°C) 5 → 40
* These values may vary depending on environmental factors such as temperature, moisture, and type of substrates.
** This information relates to fully cured product.
Description Connection joints between window- and
doorframes and walls
BOSS® PU Construction is a high quality, elastic,
one-component sealant based on polyurethane. Expansion joints for other traditional
construction materials
Properties Packaging
Very easy to apply Colour: White, black, grey, other colours on request
Permanently elastic after curing Packaging: 600 ml sausage.
Very good adhesion on many materials
Shelf life
Excellent resistance to UV radiation
12 months in unopened packaging in a cool and dry
Excellent resistance to many chemicals storage place at temperatures between +5°C & +25°C.
Applications Substrates
Expansion joints in building with high movement, Substrates: All usual building substrates, brick,
highway, water conservancy project concrete, metals.
Bonding and joint sealing for precast panel, wood, Nature: Rigid, clean, dry, free of dust and grease.
aluminium and PVC joinery seams, curtain walls,
concrete roof tiles in construction area
PAGE 1 OF 2
TECHNICAL
DATA SHEET
REVISION | 01-02-2024
BOSS® PU CONSTRUCTION SEALANT
Surface preparation: Apply primer on porous Do not apply or cure in the presence of uncured
substrates. Always use primer on natural stone, no silicone sealants, alcohol or other solvent cleaners.
primer on non-porous substrates. We recommend a
When using different reactive joint sealants, the
preliminary adhesion test on every surface.
first joint sealant must be completely hardened
before the next one is applied.
Joint dimensions
Min. width for joints: 5 mm
Max. width for joints: 30 mm
Min. depth for joints: 5 mm
Recommendation sealing jobs: joint width = 2 x joint
depth.
Application method
Application method: With manual or pneumatic caulking
gun.
Cleaning: Clean with surface cleaner immediately after
use (before curing).
Finishing: With a soapy solution before skinning.
Repair: With the same material.
Health- and Safety Recommendations
Take the usual labour hygiene into account. Consult the
packaging label for more information.
Remarks
When painted with oxidative drying paints,
disturbances in the drying of the paint may
occur (we recommend to do a compatibility
test before application).
It is recommended to do a compatibility
test prior to application.
Contact with bitumen, tar or other plasticizer
releasing materials such as EPDM, neoprene, butyl,
etc. is to be avoided since it can give rise to
discolouration and loss of adhesion.
Disclaimer: This technical data sheet replaces all previous versions. The directives contained within this documentation are Accumetric Silicones Pvt Ltd
the result of our experiments and experience, and have been submitted in good faith. Because of the diversity of the
No. 16/1, Corporation Road, Seevaram, Perungudi,
materials and substrates, in addition to the great number of possible applications that go beyond our control, we cannot
Chennai - 600 096, Tamil Nadu, India.
accept any responsibility for the results obtained. Further, since the design, quality of the substrate, and processing
Customer Support: +91 44 4026 0345 - 60
conditions are beyond our control, no liability under this publication will be accepted. In every case, it's therefore
recommended to carry out preliminary experiments. BOSS reserves the right to modify its products, without prior notice. [email protected]
www.bossproducts.in
PAGE 2 OF 2
