www.swagelok.

com

Modular Sur face -Mount

Compone nts and Se als

■ 1.5 in. (38.1 mm) C-seal modular design

■ Valves: manual and pneumatic diaphragm and bellows-sealed designs

■ Regulators: manual and preset, high-flow models

■ Gaskets: C-seal style for 1-, 2-, and 3-port configurations

2 Modular Surface-Mount Components and Seals

Surface-Mount Components
Low-Pressure Diaphragm Valves, DP Series Features
■ Pressure rating: 250 psig (17.2 bar)
■ Temperature rating: –10 to 150°F (–23 to 65°C)
■ Directional handle—quarter-turn actuation with visual
indication of open and closed position
■ Toggle handle—spring-loaded toggle with lockout
capability (can be locked in the closed position only)
■ Integral lockout handle—quarter-turn actuation with
lockout safety feature to prevent actuation (can be locked
in the closed position only)
■ Interchangeable pneumatic and manual actuators

Directional Ordering Information

Locking Ordering Numbers
Manual Actuators 2-Port 3-Port
Directional 6LVV-MSM-DP-2-P 6LVV-MSM-DP-3-P
Integral lockout 6LVV-MSM-DPL-2-P 6LVV-MSM-DPL-3-P
Toggle 6LVV-MSM-DPT-2-P 6LVV-MSM-DPT-3-P
Pneumatic Actuators 2-Port 3-Port
Normally closed 6LVV-MSM-DP-2-P-C 6LVV-MSM-DP-3-P-C
Normally open 6LVV-MSM-DP-2-P-O 6LVV-MSM-DP-3-P-O

Handle Color Options

Handle
Standard handle color is blue. To Color Designator
order an optional color, add a color Black -BK
designator to the ordering number. Green -GR
Toggle
Example: 6LVV-MSM-DPT-2-P-RD Orange -OG
Pneumatic
Red -RD
Indicator Switch Option
White -WH
To order a normally closed
For additional information, see the Swagelok Springless pneumatically actuated valve with an Yellow -YW
Diaphragm Valves for High Performance—DP Series indicator switch, add M to the ordering
catalog, MS‑01‑165. number.
Example: 6LVV-MSM-DP-2-P-CM

Bellows-Sealed Metering Features

Valves, BM Series ■ Pressure rating: 700 psig (48.2 bar)
■ Temperature rating: –20 to 600°F (–28 to 315°C)
■ Micrometer handle for precise, repeatable flow settings

Ordering Information
Ordering Numbers
2-Port 3-Port
6LVV-MSM-BM-2 6LVV-MSM-BM-3

For additional information, see the Swagelok Bellows-Sealed

Metering Valves—BM Series catalog, MS-01-23.
 Modular Surface-Mount Components and Seals 3

Surface-Mount Components
High-Flow Regulators, Features
HF Series ■ Inlet pressure rating: 1000 psig (68.9 bar) for preset models; 500 psig (34.4 bar)
for manual models
■ Outlet pressure rating: vacuum to 150 psig (10.3 bar) for preset models; 100 psig
(6.8 bar) for manual models
■ Temperature rating: ­–10 to 150°F (–23 to 65°C)
■ Flow rates up to 200 std L/min
■ Preset models can be factory-charged to a specific delivery pressure or set up
for remote adjustment of delivery pressure.
■ Manually adjustable models are offered with a choice of three spring ranges for
delivery pressure.

Ordering Information
Regulators Spring Kits for Manual Models

For additional information, see the Basic Ordering Number Pressure Range Kit Ordering
psig (bar) Number
Swagelok Compact, High-Flow Gas Model 2-Port
Vacuum to
Regulators—HF Series catalog, Preset SS-MSM-HFD3B-PXX➀ 177-13K-HFM-A
25 (1.7)
MS‑01-156, for preset models, and Manual SS-MSM-HFM3B-P➁ 5 to 50
the Swagelok High-Flow Manual (0.34 to 3.4)
177-13K-HFM-B
➀ For
 a complete ordering number, change XX­ to
Gas Regulators—HF Series catalog, a factory-set outlet pressure of 10, 20, 30, or 10 to 100
MS‑02‑157, for manual models. 50 psig (0.69, 1.3, 2.0, or 3.4 bar). 177-13K-HFM-C
(0.68 to 6.8)
Example: SS-MSM-HFD3B-P10
➁ To order a complete assembly, order a
regulator and a spring kit. See Spring Kits
for Manual Models table at right for ordering
numbers.

Gaskets and Gasket Assemblies

■ C-seal for a 1.5 in. (38.1 mm) modular system
■ 316L stainless steel material of construction
■ Helium leak-tight
SWAGELOK integrity toSWAGELOK
IGC II COMPONENTS less than 1 3 10 –9C-RING
IGC II COMPONENTS
N-ELD-759-A std cm 3/s
GASKETS N-ELD-792-A
GASKETS

Ordering Information and Dimensions Gasket Ordering Assembly

C-ring
Dimensions, in inches (millimeters), are for reference only and Description Number Requirements
are subject to change. Gaskets 1 for each 3-port
3-port
201097 surface-mount
surface mount
0.186 (4.7) component
1 for each 2-port
2-port
3-Port Manifold 201096 surface-mount
surface mount
Surface 1.50 Cap component
(38.1)
Mount Mass flow 2 for each mass
201098
controller flow controller
1.50 1 for each
Manifold cap 201105
(38.1) manifold cap
1 for each
Substrate cap 201102
substrate cap
2-port Substrate
SWAGELOK IGC II COMPONENTS MANIFOLD C-RING
Drop-down
N-ELD-0847
1 for each drop-
Surface 1.188
SS-IGC II-MH-07

Cap SS-IG2-MH-07
(30.2) gasket assembly down component
Mount

Mass Drop-Down
Flow Gasket
Controller Assembly

0.50
(12.7)
Flow-Through Cap
■ Two-port surface mount cap provides continuous flow
across a surface mount position
■ Pressure rating: 3000 psig (206 bar) at 70°F (20°C)
■ Orifice size: 0.16 in. (4.1 mm)
■ Ordering number: 6LVV-MSM-CAP-2-P

IGC® II Integrated Gas Components

For a complete selection of IGC II integrated gas
components, including substrates, manifolds, assembly
hardware, and mounting accessories, see the Swagelok
IGC II Integrated Gas Components, Substrates, Manifolds,
Mounting Components, and Assembly Hardware catalog,
MS-02-134.

IGC II System Configurator

The IGC II System Configurator is a free Windows®-
based software program that can be downloaded from
www.swagelok.com. It simplifies the layout, selection,
ordering, and assembly of IGC II integrated gas components.
It automates the process of converting a conventional gas
distribution design into a IGC II-based design, and produces
a bill of materials and an assembly diagram.

Safe Product Selection Warranty Information

When selecting a product, the total system design must Swagelok products are backed by The Swagelok Limited
be considered to ensure safe, trouble-free performance. Lifetime Warranty. For a copy, visit swagelok.com or contact
Function, material compatibility, adequate ratings, your authorized Swagelok representative.
proper installation, operation, and maintenance are the
responsibilities of the system designer and user.
Swagelok, IGC—TM Swagelok Company
Windows—TM Microsoft Corp.
Caution: Do not mix or interchange surface-mount © 2008–2013 Swagelok Company
component parts with those of other manufacturers. Printed in U.S.A., AGS
MS-02-135, R7