Group

Standards STANDARD en 0011 1650 93

Department 

Date Edition Page

2016-12-22 2 1(2)

Steel
Quenched and tempered unalloyed steel – C45 +QT
Material 0011 1650 93

1 GENERAL
This standard, based on EN 10 083-2:2006, specifies the requirements for
quenched and tempered steel. The material is identical to C45 (No.1.0503).

2 CHEMICAL COMPOSITION
The chemical composition shall comply with the specified values of table 1 below.
Permissible deviations between the product analysis and the limiting values for the
cast analysis according to EN 10083-2:2006
Table 1. Chemical composition (cast analysis), % by mass

C Si Mn P S Cr Mo Ni Cr+Ni+Mo

Min. 0,42 - 0,50 - - - - - -

Max. 0,50 0,40 0,80 0,045 0,045 0,40 0,10 0,40 0.63

3 MECHANICAL PROPERTIES
The mechanical properties shall comply with the values given in table 2 below.
Table 2. Mechanical properties.

Dimension Rp0,2 Rm A Z
d or t MPa MPa min min
mm min % %

d  16
490 700 - 850 14 35
t8

16  d  40
430 650 - 800 16 40
8  t  20

40  d  100
370 630 - 780 17 45
- Lotus Notes data base Standard Documents - GSD

20  t  60
- Internet URL http://atlascopco.com/gsd

4 MANUFACTURING PROCESS
The manufacturing process of the steel and of the products is left to the discretion
of the manufacturer. The steel shall be killed.
Edition check
 Group
Standards STANDARD en 0011 1650 93
Department 

Date Edition Page

2016-12-22 2 2(2)

5 TECHNICAL CONDITIONS OF DELIVERY

Unless otherwise agreed at the time of enquiry and order, the products shall be
delivered in the untreated condition. EN 10083-2:2006, Technical delivery
conditions for unalloyed steels, is valid where applicable.

6 AGREEMENTS ON TESTS AND INSPECTION DOCUMENTS

At the time of ordering the issue of one of the inspection documents in accordance
with EN 10204 may be agreed for each delivery.

7 HEAT TREATMENT
Quenching: 820 - 860C
Quenching agent: Water or oil
Tempering: 550 - 660C
Normalizing: 840 - 880C
- Lotus Notes data base Standard Documents - GSD
- Internet URL http://atlascopco.com/gsd
Edition check