COIMBATORE INSTITUTE OF TECHNOLOGY

DEPARTMENT OF CIVIL ENGINEERING

VISION AND MISSION OF THE INSTITUTE

Vision
The Institute strives to inculcate a sound knowledge in engineering along with realized social
responsibilities to enable its students to combat the current and impending challenges faced
by our country and to extend their expertise to the global arena.

Mission
The mission of Coimbatore Institute of Technology is to impart high quality education and
training to its students to make them World-Class Engineers with a foresight to the changes and
problems, and pioneers to offer innovative solutions to benefit the nation and the world at
large.

1
1.
 COIMBATORE INSTITUTE OF TECHNOLOGY

DEPARTMENT OF CIVIL ENGINEERING

VISION AND MISSION OF THE DEPARTMENT

Vision
To provide quality education in Civil Engineering and to become a state-of-the-art source of
world-class Civil Engineers and Researchers.

Mission
To impart quality education with necessary skills to meet the requirements of the industry and
to perform with professional ethics and an attitude for innovation in Civil Engineering through
state-of-the-art technology

2
1.
 COIMBATORE INSTITUTE OF TECHNOLOGY

DEPARTMENT OF CIVIL ENGINEERING

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)

The B.E. Degree Programme in Civil Engineering is offered in the department with the following
Educational Objectives

PEO1 To equip the graduates with sufficient knowledge and capabilities to become leaders
in industry and academia.

PEO2 To promote research culture and self-development with an aptitude for lifelong learning
among graduates.

PEO3 To inculcate professional ethics with a commitment to the society and environment.

3
1.
 COIMBATORE INSTITUTE OF TECHNOLOGY

DEPARTMENT OF CIVIL ENGINEERING

PROGRAMME OUTCOMES (POs)

Engineering Graduates will be able to:

1. Engineering knowledge: Apply the knowledge of mathematics, science, engineering fundamentals,

and an engineering specialization to the solution of complex engineering problems.

2. Problem analysis: Identify, formulate, review research literature, and analyze complex engineering
problems reaching substantiated conclusions using first principles of mathematics, natural sciences,
and engineering sciences.

3. Design/development of solutions: Design solutions for complex engineering problems and design
system components or processes that meet the specified needs with appropriate consideration for the
public health and safety, and the cultural, societal, and environmental considerations.

4. Conduct investigations of complex problems: Use research-based knowledge and research

methods including design of experiments, analysis and interpretation of data, and synthesis of the
information to provide valid conclusions.

5. Modern tool usage: Create, select, and apply appropriate techniques, resources, and modern
engineering and IT tools including prediction and modeling to complex engineering activities with an
understanding of the limitations.

6. The engineer and society: Apply reasoning informed by the contextual knowledge to assess
societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to the
professional engineering practice.

7. Environment and sustainability: Understand the impact of the professional engineering solutions
in societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable
development.

8. Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of
the engineering practice.

9. Individual and team work: Function effectively as an individual, and as a member or leader in
diverse teams, and in multidisciplinary settings.

10. Communication: Communicate effectively on complex engineering activities with the engineering
community and with society at large, such as, being able to comprehend and write effective reports
and design documentation, make effective presentations, and give and receive clear instructions.

11. Project management and finance: Demonstrate knowledge and understanding of the
engineering and management principles and apply these to one’s own work, as a member and leader
in a team, to manage projects and in multidisciplinary environments.

12. Life-long learning: Recognize the need for, and have the preparation and ability to engage in
independent and life-long learning in the broadest context of technological change.

4
1.
 COIMBATORE INSTITUTE OF TECHNOLOGY

DEPARTMENT OF CIVIL ENGINEERING

PROGRAMME SPECIFIC OUTCOMES (PSOs)

PSO1: The graduates of this programme with proficiency in mathematics and physical science will
excel in the core areas of civil engineering such as Structural, Environmental, Geotechnical, Water
resources engineering and Construction Management.

PSO2: The graduates will plan, produce detailed drawings, write specifications, prepare cost
estimates.

PSO3: The graduates will interact with stakeholders effectively and execute quality construction
work.

5
1.
 COIMBATORE INSTITUTE OF TECHNOLOGY
(Government Aided Autonomous Institution Affiliated to Anna University)
DEPARTMENT OF CIVIL ENGINEERING
B.E. CIVIL ENGINEERING-FULL TIME
(III TO VIII SEMESTER)

SEMESTER – III

COURSE COURSE NAME L T P Credits Category

CODE
19CEM31 Differential Equations and Boundary Value 3 1 0 4 BSC
Problems
19CE31 Mechanics of Solids 3 1 0 4 ES
19CE32 Engineering Geology 3 0 0 3 PC
19CE33 Mechanics of Fluids 3 0 0 3 PC
19CE34 Surveying 3 0 0 3 PC
19CE35 Water Supply Engineering 3 0 0 3 PC
19HSS01 Science of Creativity and Professional Ethics 1 0 0 1 HSC
19CEL36 Strength of Materials Laboratory - - 2 1 PC
19CEL37 Survey Laboratory - - 2 1 PC
One Credit Course 1 0 0 1 EEC

19HOC31 Communication Skills for Engineers I* 0 0 2 1 EEC

TOTAL CREDITS 25
SEMESTER – IV
COURSE COURSE NAME L T P Credits Category
CODE
19CE41 Construction Technology 3 0 0 3 PC
19CE42 Strength of Materials 3 1 0 4 PC
19CE43 Transportation Engineering 3 0 0 3 PC
19CE44 Applied Hydraulics and Hydraulic Machinery 3 0 0 3 PC
19CE45 Waste Water Engineering 3 0 0 3 PC
19CE46 Professional Practices and Ethics 3 0 0 3 BSC
19CEL47 Hydraulics Laboratory - 0 2 1 PC
19CEL48 Environmental Engineering Laboratory - 0 2 1 PC
One Credit Course 1 0 0 1 EEC
19HOC41 Communication Skills for Engineers II* 0 0 2 1 EEC
TOTAL CREDITS 23
* Not to be counted for GPA. Pass is required

6
1.
SEMESTER – V
COURSE L T P Credits Category
COURSE NAME
CODE
19CE51 Structural Analysis - I 3 0 0 3 PC
19CE52 Design of Reinforced Concrete Structural Elements 3 0 0 3 PC
19CE53 Mechanics of Soils 3 0 0 3 PC
19CE54 Concrete Technology 3 0 0 3 PC
Elective– I 3 0 0 3 PE
Elective – II 3 0 0 3 PE/OE
19CEL55 Computer Aided Civil Engineering Drawing 0 0 2 1 ES
19CEL56 Highway Engineering Laboratory 0 0 2 1 PC
One Credit Course 1 0 0 1 EEC
Mini Project - - - - EEC
19INT51 Internship* 0 0 2 1 EEC
19HOC51 Employability and Personality Development Skills I# 0 0 2 1 EEC
TOTAL CREDITS 23
*2 weeks of Internship to be completed during 4th semester vacation
SEMESTER – VI
COURSE L T P Credits Category
COURSE NAME
CODE
19CE61 Structural Analysis - II 3 0 0 3 PC

19CE62 Design of Steel Structures 3 0 0 3 PC

19CE63 Foundation Engineering 3 0 0 3 PC

Elective– III 3 0 0 3 PE
Elective- IV 3 0 0 3 PE/OE

19CEL64 Soil Mechanics Laboratory 0 0 2 1 PC

Quantity Surveying and Project

19CEL65 0 0 2 1 PC
Planning Laboratory

One Credit Course 1 0 0 1 EEC

19CE66 Mini Project 0 0 6 3 EEC

19INT61 Internship* 0 0 2 1 EEC

19HOC61 Employability and Personality Development Skills II# 0 0 2 1 EEC

TOTAL CREDITS 23
*2 weeks of Internship to be completed during 5th semester vacation
# Not to be counted for GPA. Pass is required

7
1.
SEMESTER – VII

COURSE COURSE NAME L T P Credits Category

CODE

19CE71 Irrigation Engineering 3 0 0 3 PC

19CE72 Earthquake Resistant Design of Structures 3 0 0 3 PC

19CE73 Construction Management 3 0 0 3 PC

Elective- V 3 0 0 3 PE
Elective- VI 3 0 0 3 PE

19CEL74 Computer Applications Laboratory 0 0 2 1 PC

19CEL75 Concrete Laboratory 0 0 2 1 PC

19CE76 Project Phase I 0 0 6 3 EEC

TOTAL CREDITS 20

SEMESTER – VIII

COURSE COURSE NAME L T P Credits Category

CODE

Elective– VII 3 0 0 3 PE

Elective-VIII 3 0 0 3 PE

19CE81 Project Phase II 0 0 10 5 EEC

TOTAL CREDITS 11

TOTAL CREDITS-164

BSC – Basic Sciences

HSC – Humanities and Social Sciences

ES –Engineering Sciences

PC –Professional Core

PE- Professional Elective

OE-Open Elective

EEC –Employability Enhancement Course

8
1.
LIST OF ELECTIVES
PROFESSIONAL ELECTIVES

1.STRUCTURAL ENGINEERING L T P C Category

1 19CEE01
Design of Concrete Structures 3 0 0 3 PE
2 19CEE02
Advanced Concrete Structures 3 0 0 3 PE
3 19CEE03
Prestressed Concrete Structures 3 0 0 3 PE
4 19CEE04
Design of Bridges 3 0 0 3 PE
5 19CEE05
Advanced Steel Structures 3 0 0 3 PE
6 19CEE06
Advanced Structural Analysis 3 0 0 3 PE
7 19CEE07
Prefabricated Structures 3 0 0 3 PE
8 19CEE08
Advanced Surveying 3 0 0 3 PE
9 19CEE09
Numerical Methods for Civil Engineering 3 0 0 3 PE
10 19CEE10
Finite Element Method 3 0 0 3 PE
11 19CEE11
Industrial Structures 3 0 0 3 PE
12 19CEE12
Smart Materials and Structures 3 0 0 3 PE
13 19CEE13
Safety in Civil Engineering Practice 3 0 0 3 PE
14 19CEE14
Remote Sensing and GIS 3 0 0 3 PE
15 19CEE15
Ground Improvement Techniques 3 0 0 3 PE
16 19CEE16
Design of Deep Foundation 3 0 0 3 PE
Earthquake Resistant Design of Masonry and
17 19CEE17 3 0 0 3 PE
Timber Structures
18 19CEE18 Building Services and Maintenence Engineering 3 0 0 3 PE
19 19CEE19 Optimization Techniques in Civil Engineering 3 0 0 3 PE
20 19CEE20 Theory of Architecture 3 0 0 3 PE
21 19CEE21 Green Building Concepts and Practices 3 0 0 3 PE
2.ENVIRONMENTAL ENGINEERING L T P C Category
1 19CEE22 Design of Environmental Structures and Drawing 3 0 0 3 PE
2 19CEE23 Air Pollution and Control 3 0 0 3 PE
3 19CEE24 Solid and Hazardous Waste Management 3 0 0 3 PE
4 19CEE25 Environmental Impact Assessment 3 0 0 3 PE
5 19CEE26 Industrial Waste Water Management 3 0 0 3 PE
6 19CEE27 Geo Environmental Engineering 3 0 0 3 PE
3.TRANSPORTATION ENGINEERING L T P C Category
1 19CEE28 Pavement Engineering 3 0 0 3 PE
2 19CEE29 Airport and Harbour Engineering 3 0 0 3 PE
3 19CEE30 Traffic Engineering 3 0 0 3 PE
4 19CEE31 Urban Transportation Planning 3 0 0 3 PE
5 19CEE32 Intelligent Transport System 3 0 0 3 PE
4.HYDRAULICS L T P C Category
1 19CEE33 Hydraulic Structures 3 0 0 3 PE
2 19CEE34 Engineering Hydrology 3 0 0 3 PE

9
1.
5.CONSTRUCTION ENGINEERING AND MANAGEMENT L T P C Category
1 19CEE35 Valuation of Immovable Properties 3 0 0 3 PE
2 19CEE36 Engineering Economics 3 0 0 3 PE
3 19CEE37 Maintenance and Rehabilitation Of Structures 3 0 0 3 PE
4 19CEE38 Advanced Construction Technology 3 0 0 3 PE
5 19CEE39 Contract Management 3 0 0 3 PE
6 19CEE40 Construction Equipments and Techniques 3 0 0 3 PE
7 19CEE41 Formwork for Concrete Structures 3 0 0 3 PE
8 19CEE42 Entrepreneurship in Civil Engineering 3 0 0 3 PE

OPEN ELECTIVES L T P C Category

1 19CEOE01 Town Planning and Architecture 3 0 0 3 OE
2 19CE0E02 Climate Change and Adaptation 3 0 0 3 OE
3 19CEOE03 Metro Systems and Engineering 3 0 0 3 OE
4 19CEOE04 Renewable Energy Sources 3 0 0 3 OE
5 19CEOE05 Principles of Sustainable Development 3 0 0 3 OE
6 19CEOE06 Disaster Management 3 0 0 3 OE

ONE CREDIT
L T P C Category
A) INDUSTRY BASED OC

1 19CEOC01 Building Construction Process- An Overview 1 0 0 1 OC

2 19CEOC02 Applications Of IOT in Civil Engineering 1 0 0 1 OC

3 19CEOC03 Certification and Career Roadmap in Civil 1 0 0 1 OC

Engineering
4 19CEOC04 Environmental Monitoring 1 0 0 1 OC

5 19CEOC05 Python for Civil Engineers OC

1 0 0 1
6 19CEOC06 3D Printing of Civil Engineering Structures OC
1 0 0 1
B) DEPARTMENT BASED OC

1 19CEOC07 Alternative Building Materials from Waste 1 0 0 1 OC

2 19CEOC08 Structural Drawing 0 0 2 1 OC
3 19CEOC09 Sustainability in Construction OC
1 0 0 1
4 19CEOC10 Introduction to Image Processing and GIS 0 0 2 1 OC
C) NPTEL ONLINE COURSE

10
1.
 19CEM31 DIFFERENTIAL EQUATIONS AND BOUNDARY VALUE PROBLEMS

ASSESSMENT: THEORY
L T P C
COURSE OUTCOMES:

Upon the completion of the course, the students will be able to 3 1 0 4

CO1: Analyze the concepts of ordinary differential equations in modelling and solving physical problems

CO2: Demonstrate accurate and efficient use of numerical solutions of ordinary differential equations and
their role in modern mathematics and applied contexts

CO3: Formulate concrete problems and finding the solutions of partial differential equations

CO4: Solve the boundary value problems relevant to vibration of strings

CO5: Familiarize finite difference approximation to get numerical solutions of partial differential equations

ORDINARY DIFFERENTIAL EQUATIONS

Second and higher order linear differential equations with constant coefficients - Cauchy-Euler equation,
Cauchy-Legendre equation- Method of variation of parameters - System of simultaneous linear differential
equations with constant coefficients (9)

NUMERICAL SOLUTION OF ORDINARY DIFFERENTIAL EQUATIONS

Numerical solution of first order ordinary differential equation: Taylor Series Method –Picard’s Method -
Euler’s method -Modified Euler’s method- Fourth order Runge- Kutta method - Milne’s predictor and
corrector method (9)

PARTIAL DIFFERENTIAL EQUATIONS

Formation of partial differential equations – Solutions of first order non-linear partial differential
equations(standard types) - Lagrange’s linear equations –Second and higher order homogeneous linear
equations with constant coefficients (9)

BOUNDARY VALUE PROBLEMS

Method of separation of variables - Vibration of strings - One dimensional wave equation – One dimensional
heat flow equations with steady state and unsteady state solutions (9)

NUMERICAL SOLUTION OF PARTIAL DIFFERENTIAL EQUATIONS

Difference Quotients – Graphical Representation of partial quotients – Classification – One dimensional heat
equation: Explicit formula - Bender Schmidt recurrence method - One dimensional wave equation: Explicit
formula (9)

Total: 45+15=60 hours

11
1.
TEXT BOOKS

1. B.S. Grewal, “Higher Engineering Mathematics”, 42nd Edition, Khanna Publishers, 2012.
2. B.V.Ramana, “Higher Engineering Mathematics”, Kindle Edition, Tata McGraw-Hill Publishing
Company Limited, New Delhi, 2018.

REFERENCE BOOKS
1. Srimanta Pal and Suboth. C. Bhunia, Engineering Mathematics, Oxford University Press, New Delhi,
2015.
2. Brian Bradie, "A Friendly Introduction to Numerical Analysis", Pearson Education, Asia, New Delhi,
2007.
3. S.S. Sastry, “Introductory Methods of Numerical Analysis”, 5th Edition, Prentice Hall India Learning
Private Limited, 2012.

12
1.
 19CE31 - MECHANICS OF SOLIDS

ASSESSMENT: THEORY L T P C
COURSE OUTCOME 3 1 0 4
After successful completion of the course, students will be able to

CO1: Compute the centroid of given plane and composite sections and calculate the moment of inertia,
principal moment of inertia for a given plane sections.

CO2: Compute simple stress and strain, thermal stresses for the given linear bars and compound bars with
single axial load also calculate the change in volume of given three dimensional bars subjected to three
mutually perpendicular forces.

CO3: Compute principal stresses for the given two dimensional stress systems and calculate stresses for
the given material due to suddenly applied load and impact load.

CO4: Compute and construct shear force, bending moment diagrams for the given determinate beams
subjected to Point loads, UDL and UVL.

CO5: Compute stresses related to bending and shear for the given determinate beams with different cross
sections subjected to Point loads and UDL and also compute bending and shear stress of given hollow and
solid circular shaft.

CENTROID, CENTRE OF GRAVITY AND MOMENT OF INERTIA

Centroid of areas, compound areas – Determination of moment of inertia of plane figures- principal
moment of inertia – Radius of gyration

(12)

CONCEPT OF STRESS AND STRAIN

Simple stresses and strains at a point -Normal and shear Stresses - Hooke's Law - Young's modulus - Bars
subjected to axial Forces - simple problems - Thermal stresses - Simple statically Indeterminate problems -
compound bars. Changes in dimensions and volume - Poisson's ratio - Modulus of Rigidity - Surface and
volume strains - Bulk modulus - Relation between Elastic constants - Simple Tension Test on a Mild Steel
rod - Stress-strain diagram - Concept of Factor of Safety and permissible stresses.

(12)

STRAIN ENERGY PRINCIPLES AND COMPLEX STRESSES

Strain energy -Resilience - Stresses due to suddenly applied loads and impact loads.

Complex stresses - Components of stress on inclined planes - Expression for stressed element subjected to
two normal stresses with shear - Principal stresses and Principal planes - Mohr's circle of stress.

(12)

13
1.
BENDING OF BEAMS

Types of Beams - Types of loads - Shear force and Bending Moment -Relationship between loading
intensity, shear force and bending moment - Shear force and bending moment diagrams for statically
determinate beams. Theory of simple bending -Stress distribution due to bending moment and shear force
- Design of beams - Beams of uniform strength - Flitched beams - Leaf springs.

(12)

TORSION AND SPRINGS

Torsion of solid and hollow circular shafts - Power transmitted through shafts - Strain energy due to
torsion - Combined bending and torsion – close coiled helical springs.

(12)

TOTAL: 60Hours

TEXT BOOKS

1.Rajput,R.K.,"Essentials of Strength of Materials",S.Chand & Company Ltd.,NewDelhi,2015.

2.BansalR.K.,"StrengthofMaterials",LaxmiPublications,NewDelhi,2018.

3.Punmia B.C, Ashok jain and Arun jain, “Mechanics of Materials”, Lakshmi Publications, NewDelhi, 2017.

REFERENCE BOOKS

1.Beer F.P , Johnston E.R., DeWolf J.T. and Mazurek D., "Mechanics of Materials", McGraw-Hill Higher
Education, 7th edition, 2014.

2.L.S.Negi, "Strength of Materials", Tata Mc Graw Hill Education Pvt. Ltd, 2017.

3. Sadhu Singh, "Strength of Materials", Khanna Publishers, NewDelhi, 2016.

4. Prakash Rao D.S., "Strength of Materials" Volume I, Universities Press (India) Limited, Hyderabad,2004.

5. Lehri,R.S., Lehri.,AS., "Strength of Materials", S K Kataria & Sons, New Delhi,2012.

6. Timonshenko,S.P, Gere,J.M., "Mechanics of Materials",CBSPublishers,NewDelhi,2006.

7. Egor P. Popov, "Introduction to Mechanics of Solids", Prentice Hall of India, New Delhi,2003.

ONLINE RESOURCES

1. https://nptel.ac.in/courses/105105108/
2. https://nptel.ac.in/courses/112106141/

14
1.
 19CE32 - ENGINEERING GEOLOGY

ASSESSMENT: THEORY
L T P C
COURSE OUTCOME
3 0 0 3
After successful completion of the course, students will be able to

CO 1: Describe the importance of geology in civil engineering, weathering, type of soils, geological work of
various geological agents, earthquake, interior and age of the earth, landslide mitigation.

CO 2: Explain geological surface and subsurface features

CO 3: Identify the elements of crystallography to classify minerals based on their system

CO 4: Identify minerals based on their physical properties and its distribution in India.

CO 5: Identify rocks based on mineralogy, texture, structure and mode of occurrence with its application in
civil engineering purposes.

CO 6: Employ the geological knowledge for projects of dams & reservoirs, tunnels, coastal protection.

CO 7:Interpret subsurface geological features and properties of rocks using fundamental principles of
geophysical methods.

PHYSICAL GEOLOGY AND GEOMORPHOLOGY

Applications of earth science in civil engineering practices - understanding internal structure –composition
and age of the earth. Rock weathering – types and effects in civil engineering- soil – soil profile - types -
mode of formation –process of mass wasting- landslides and related phenomenon- causes and control -
geomorphological features developed by river, ground water, wind. Earthquake-theory-terminology -
causes-seismic waves-measurements, Richter scale - Tsunami - impacts on civil engineering works.

(9)

STRUCTURAL GEOLOGY

Dip and strike-apparent dip and true dip- folds- parts of fold- types of fold- mechanism of fold-recognition
of fold. Fault- fault terminology- classification of fault- effects of fault on out crop- significance of folds and
fault- unconformities- types- recognition of unconformities- joints- classification of joints- structures due to
denudation- outlier- Inlier- off lap- on lap.

(9)

MINERALOGY & CRYSTALLOGRAPHY

Physical properties of mineral - its composition - system of crystallization - ore forming and rock forming
minerals – origin - uses –distribution in India. Quartz group- Feldspar group - Feldspathoid group - Silica
group - Pyroxene group - Mica group - Olivine group - Chlorite group - Serpentine group - Clay mineral
group- Alumino silicate group- Calcic minerals-Carbonate group-Economic minerals deposits in India

(9)
15
1.
PETROLOGY & STRATIGRAPHY

Rock cycle - Igneous, sedimentary and metamorphic rocks- mineralogical composition, texture and
structure, classification, engineering properties of Igneous rocks - granite, gabbro, dolerite and basalt.
Sedimentary Sandstone, Shale, Limestone, Laterite. Metamorphic Rock - Gneiss, Quartzite, Slate,
Charnokite, Decorative Stones-Porphyries- Marble. Outline of stratigraphy-geologic time scale-
stratigraphic units- origin and formation of coal-chemical and banded constituents of coal-ranks of coal-
distribution of coal in India- petroleum formation-structural and stratigraphic controls-traps-distribution
in India.

(9)

APPLIED GEOLOGY

Rocks as building stones-properties of building stones-road metals-geology of dam sites-dams

terminology-types-problems associated with dam sites- geology of reservoirs-tunnels-bridges-
constructional features-stability of bridges- foundation of bridges and coastal protection –geophysical
survey-magnetic survey-electrical survey-seismic survey and radiometric survey-principles and
applications

(9)

TOTAL: 45 Hours

TEXT BOOKS

1. Parbin Singh.,”A textbook of Engineering and General Geology’’, kataria & sons, publishing house,
Delhi,2012.

2. K. M. Bangar., “Principles of Engineering Geology, Standard Publishers distributors. NAI SARAK Delhi-
2013

3. W.D. Thornbury .,”Principles of Geomorphology” Second Edition,- CBS-Publications, New Delhi;

December 2004

REFERENCE BOOKS

1. Chenna Kesavulu N., "Textbook of Engineering Geology", Laxmi Publications, New Delhi,
Second Edition, 2016.
2. Krynine and Judd, "Principles of Engineering Geology and Geotechnics", Tata McGraw Hill, New Delhi,
1998.
3. Dr. Savindra Singh, “Physical Geography” Pravalika Publications,Allahabad, India; 2015
4. Tyrrell, "Principles of Petrology", B.I .Publications, Bombay, 1998.
5. Billings, "Structural Geology", Asia Publishing House, New Delhi, 1989.
6. Dexter Perkins, Mineralogy, 3rd Edition; University of North Dakota@ 2011.
7. William E. Ford; Dana’s textbook of mineralogy; CBS publishers & distributors, New Delhi; 2006.
8. Rutley's Elements of Mineralogy 27th edition revised by CD Gribble- CBS-publications, New Delhi ;
December 2005.
9. Umeshwar Prasad; Economic Geology Economic Mineral Deposits second edition CBS publishers &
distributors, New Delhi, 2006.
10. Petar Milanovic” Engineering Karstology of Dams and Reservoirs”, CRC Press; 2016.
11. William Lowrie “Fundamentals of Geophysics” Third edition; Cambridge university press, 1997.

16
1.
 19CE33 - MECHANICS OF FLUIDS

ASSESSMENT: THEORY
L T P C
COURSE OUTCOMES:
3 0 0 3
On successful completion of this course, students will have the ability to

CO1: Apply the storage and flow concepts of fluids and pressure acting on fluids

CO2: Apply the principles of static conditions on fluids

CO3: Analyse the principles of fluid flow using measuring devices

CO4: Analyse simple pipe systems for transport of liquids under different flow conditions

CO5: Apply the principles of dimensional analysis in solving fluid problems through model studies

PROPERTIES OF FLUIDS & FLUID PRESSURE

Introduction of basic properties – Viscosity – compressibility – surface tension – real and ideal fluids –
Concept of Fluid pressure – Pressure head – Significance of pressure in fluid statics and dynamics – Various
methods of pressure measurements. (9)

HYDROSTATICS

Total pressure and centre of pressure on plane submerged surfaces – simple problems – Buoyancy – Centre
of buoyancy – Metacentre and metacentric height – conditions of equilibrium of floating and submerged
bodies - Fluid mass subjected to uniform linear acceleration – fluid containers subjected to constant
rotation

(9)

CONCEPTS OF FLUID FLOW

Classification of fluid flow – velocity and acceleration – velocity potential and stream function- continuity
equation – Euler’s equation of motion – Bernoulli’s equation – applications – venturimeter, orifice meter,
pitot tube – simple problems – Velocity and discharge through orifices and mouthpieces

(9)

FLOW THROUGH PIPES

Laminar flow in circular pipes – Hagen – Poisueills’s equation – Turbulent flow – Darcy–Weisbach equation
– major and minor losses – transmission of power through pipes – parallel, series pipes – flow through long
pipes – flow between reservoirs – flow through siphon pipes – water hammer

(9)

DIMENSIONAL ANALYSIS AND MODEL STUDIES

Fundamental dimensions - dimensional homogeneity – Dimensional analysis by Rayleigh’s method and

Buckingham Pi-Theorem - Dimensionless parameters - Similitude and model studies – Distorted Models

(9)

Total: 45 Hours

17
1.
TEXT BOOK:

1. Bansal.R.K., “Text Book of Fluid Mechanics and Hydraulic Machines”, M/s. Lakshmi Publications,
Madras, 2005.

2. Modi.P.N, & Seth.S.M., “Hydraulics And Fluid Mechanics Including Hydraulic Machines”, Standard
Book House, 21st edition, New Delhi, 2017.

3. Rajput.R.K. “Fluid Mechanics and Hydraulic Machines", S.Chand and Co, New Delhi, 2015.

REFERENCE BOOKS:

1. Streeter, V.L., & Wylie, E.B., “Fluid Mechanics”, McGraw Hill, 2000.

2. Frank.M. White, “Fluid Mechanics”, Tata McGraw Hill, 7th Edition, New Delhi, 2017.

3. Ramamrutham.S, “Hydraulics Fluid Mechanics and Fluid Machines”, Dhanpat Rai Publishing
Company (P) Ltd, 9th Edition, New Delhi, 2014.

4. Arora K.R., “Fluid Mechanics, Hydraulics and Hydraulic Machines”, Standard Publishers &
Distributors,9th edition, 2005.

ONLINE RESOURCES

1. http://www.nptelvideos.in/2012/11/fluid-mechanics.html

2. https://www.classcentral.com/course/swayam-introduction-to-fluid-mechanics-7945

18
1.
 19CE34 SURVEYING

ASSESSMENT: THEORY
L T P C
COURSE OUTCOMES:
3 0 0 3
After successful completion of the course, students will be able to
CO1 - Assess the angles, distances and levels

CO2 - Identify the data collection methods and prepare field notes

CO3 - Demonstrate the application of survey instruments

CO4 - Interpret the survey data and compute areas and volumes

CO5- Describe the principles of photogrammetry and hydrographic surveying

MEASUREMENT OF DISTANCES AND DIRECTIONS

Importance of surveying to engineers, plane and geodetic surveying, principles of surveying, classification
of surveys, Linear Measurements using chain, measuring tape, hypotenuse allowance. Measurement of
angles, bearings and included angles using Compass, Measurement of angles by Vernier theodolite,
Application of Electronic Theodolites.

(9)

LEVELLING AND COMPUTATION OF AREAS AND VOLUMES

Levelling- Basics definitions, types of levels and levelling staff, methods of levelling, Determination of
levels- Height of Instrument Method - Rise and Fall method, Contouring- Characteristics and uses of
Contours, Direct & Indirect methods of contour surveying, Areas - Determination of areas consisting of
irregular boundary and regular boundary. Volumes - determination of volume of earth work in cutting and
embankments, capacity of reservoirs.
(9)

THEODOLITE TRAVERSING AND TRIANGULATION

Theodolite Surveying - Types of Theodolites, measurement of horizontal angle by repetition method and
reiteration method, measurement of vertical Angle, Traversing -Methods of traversing, traverse
computations and adjustments, Gale’s traverse table, Omitted measurements. Tachometric Surveying -
Principles of Tachometry, stadia and tangential methods of Tachometry. Triangulation - baseline – satellite
stations – reduction to centre- trigonometrical levelling – single and reciprocal observations

(9)

CURVES AND ADVANCED TOPICS IN SURVEYING

Curves: Types of curves and their necessity, elements of simple curve and setting out of simple curve,
Introduction to compound, reverse, transition and vertical curves. Hydrographic Surveying-methods,
applications and uses – Tides – MSL – Sounding methods – Three point problem – Strength of fix,
Introduction to photogrammetry

(9)
19
1.
MODERN SURVEYING METHODS:

Total Station and Global Positioning System.- Basic principles, classifications, applications, comparison with
conventional surveying. Electromagnetic distance measuring system - principle of working and EDM
instruments, Components of GPS – space segment, control segment and user segment, reference systems,
satellite orbits, GPS observations. Applications of GPS, GIS and remote sensing.

(9)

Total: 45 Hours

TEXT BOOKS:

1. Kanetkar.T.P and Kulkarni.S.V, ‘Surveying and Levelling’, Parts 1 & 2, Pune Vidyarthi Griha
Prakashan, Pune, 2014
2. B. C. Punmia, Ashok Kumar Jain and Arun Kumar Jain, ‘Surveying’ (Vol – 1, 2 & 3)’, Laxmi
Publications (P) ltd., New Delhi. 2016
3. Chandra A M, ‘Higher Surveying’, New Age Publishers; New Delhi, 2015

REFERENCES:

1. Hoffman. B, H. Lichtenegga and J. Collins, ‘Global Positioning System - Theory and Practice’,
Springer -Verlag Publishers, 2001.
2. R. Subramanian, ‘Surveying and Levelling’, Oxford university press, New Delhi. 2013
3. Duggal S K, “Surveying (Vol – 1 & 2)”, Tata McGraw Hill Publishing Co. Ltd. New Delhi, 2016.
4. R. Agor, “Surveying and levelling”, Khanna Publishers 2015.

ONLINE RESOURCES

1. http://www.nptelvideos.in/2012/11/surveying.html

20
1.
 19CE35 - WATER SUPPLY ENGINEERING
ASSESSMENT: THEORY
L T P C
COURSE OUTCOME
After successful completion of the course, students will be able to 3 0 0 3
CO1: Identify the various sources and characteristics of water and analyse the
importance and demand for planned water supply system.
CO2: Analyse the need and economic feasibility in the conveyance of potable water from the
source using pipes and pumps.
CO3: Design various conventional treatment system to achieve the potable water quality
standards specified.
CO4: Interpret advanced water treatment system available in current scenario to provide high
quality drinking water.
CO5: Describe the basic requirements of water distribution system and determine the pipe flow
rates and pressure heads using pipe network analysis.

SOURCES OF WATER
Importance and need for planned water supply scheme –Design period- Population forecasting
methods -Water demand-types and per capita demand, factors affecting per capita demand –
Sources of water and their characteristics, Surface and Groundwater – Impounding Reservoir:
Mass in-flow curve and analytical methods –Water characterization-physical, chemical and
biological – Significance – Drinking Water quality standards (IS, CPHEEO and WHO)

(9)
CONVEYANCE FROM THE SOURCE
Intake structures, need and its types –Pipe materials, pipe appurtenances and valves used in
transmission of water- laying, jointing and testing of pipes – Hydraulics design of pressure pipes –
Pumps, pumping station and capacity of pumps – Selection of pumps.
(9)
WATER TREATMENT
Screening - Sedimentation – theory, types of settling, Stokes law - Coagulation – theory, chemicals
used, flocculation - Jar test – design of sedimentation tank - Filtration – removal mechanisms, filter
media, types, slow sand, rapid sand and pressure filters, filter design - Disinfection – methods.
Chlorination – action, factors influencing, free chlorination, combined chlorination.
(9)
TERTIARY WATER TREATMENT
Water softening – Desalination – demineralization – Adsorption - Ion exchange– Membrane
Systems – Reverse osmosis - Iron and Manganese removal - Defluoridation - Construction and
Operation & Maintenance aspects – Recent advances - MBR process.
(9)
WATER DISTRIBUTION
Requirements of water distribution and its method – Components – Service reservoirs – Analysis
and design of distribution network by equivalent pipe method and Hardy-Cross method of
balancing– Leak detection – Corrosion and its control- Principles of design of water supply in
buildings – House service connection – Fixtures and fittings, systems of plumbing and types of
plumbing - Langelier saturation index (LSI).
(9)
Total: 45 hours
21
1.
TEXTBOOKS:
1. Garg, S.K., “Water supply Engineering”,Vol.I, Khanna Publishers, New Delhi, 2010.
2. Birdie G.S. and Birdie J.S. “Water Supply and Sanitary Engineering” Dhanpat Rai Publishing
Company New Delhi, 8th edition 2017.
3. Duggal.K.N., “Elements of Environmental Engineering”, S.Chand& Co., New Delhi ,2007.
4. Punmia.B.C., Ashok Jain and Arun Jain, “Water supply Engineering”, Laxmi Publications Pvt.
Ltd., New Delhi, 2016.
5. Modi, P.N., Water Supply Engineering, Vol.I, Standard Book House, New Delhi, 2010.

REFERENCES:
1. Manual on Water Supply and Treatment, CPHEEO, Ministry of Urban Development,
Government of India, New Delhi, 1999.
2. IS10500:2012, Water Quality Standards, New Delhi 2012.
3. Peavy, Rowe, Tchobanoglous, “Environmental Engineering”, McGraw Hill Publishers, New
Delhi, 2017.
4. Syed R. Qasim and Edward M. Motley Guang Zhu, “Water Works Engineering Planning,
Design and Operation”, Prentice Hall of India Learning Private Limited, New Delhi, 2009.

ONLINE RESOURCES:
1. https://nptel.ac.in/courses/105104102/
2. https://nptel.ac.in/courses/105106119/

22
1.
 19CEL36 - STRENGTH OF MATERIALS LABORATORY

ASSESSMENT: PRACTICAL
L T P C
COURSE OUTCOME
0 0 2 1
After successful completion of the course, students will be able to

CO1 : Assess the tensile and shear strength of mild steel rod and compressive strength, water absorption
and efflorescence of given bricks.

CO2 : Assess the hardness number of given metal pieces.

CO3: Assess the impact strength of given metal and stiffness of helical spring.

CO4: Assess the compressive strength and hardness properties of wooden specimens.

CO5 : Assess the flexural rigidity and modulus of elasticity of simply supported beams with rectangular,
semi circular and trapezoidal cross section, fixed beam and cantilever beam of square cross section.

LIST OF EXPERIMENTS

1. Tension test on steel bars

2. Shear test on steel bars

3. Tests on bricks

4. Hardness test - Brinell hardness number

5. Hardness test - Rockwell hardness number

6. Impact flexure test on metals

7. Test on wood

8. Test on helical spring

9. Bending test on beams (simply supported, cantilever, fixed)

10. Torsion test on mild steel.

REFERENCE BOOKS

1. Rajput,R.K., "Essentials of Strength of Materials", S.Chand & Company

Ltd.,NewDelhi,2015.

2. IS 432 Part I- 1982, “Specification for Mild Steel and Medium Steel bars and hard-drawn
steel wire for Concrete Reinforcement”, Bureau of Indian Standards, New Delhi.

3. IS 3495 Part I to IV- 1992, "Methods of Tests of Burnt Clay Building Bricks", Bureau of
Indian Standards, New Delhi.

23
1.
 19CEL37 SURVEY LABORATORY

ASSESSMENT: PRACTICAL L T P C
SURVEYING LABORATORY
0 0 2 1

Course Outcomes: After successful completion of the course, students will be able to

CO1 – examine the measurements of distance, area, angles, and levels

CO2 - evaluate the cutting and filling quantities

CO3 – determine the setting out works of buildings, bridges and other structures

LIST OF EXPERIMENTS:

Chain Survey

1. Study of chains and its accessories, Aligning, Ranging, Chaining and Marking Perpendicular offset
2. Setting out works – Foundation marking using tapes single Room and Double Room
3. Setting out works – Curve marking using tape – offset method
Compass Survey
4. Compass Traversing – Measuring Bearings & arriving included angles
Levelling – Study of levels and levelling staff
5. Fly levelling using Dumpy level & Auto level
6. Check leveling, Measurement of L/S and C/S of Road - Differential Levelling
Theodolite – Study of Theodolite
7. Measurements of horizontal angles by reiteration and repetition and vertical angles
8. Determination of elevation of an object using single plane method when base is accessible/inaccessible.
9. Setting out works – Foundation marking using electronic theodolite
Tacheometry – Tangential system – Stadia system
10. Determination of Tacheometric Constants
11. Heights and distances by stadia Tacheometry
Total Station – Study of Total Station, Measuring Horizontal and vertical angles
12. Traverse using Total station and Area of Traverse
13. Determination of distance and difference in elevation between two inaccessible points using Total
station
14. Setting out works – Foundation marking using electronic total station

REFERENCES:
1. James M. Anderson and Edward M. Mikhail, Surveying, Theory and Practice, 7th Edition, McGraw Hill,
2001.
2. Bannister and S. Raymond, “Surveying”, 7th Edition, Longman 2004.
3. Roy S.K., “Fundamentals of Surveying”, 2nd Edition, Prentice‟ Hall of India, 2004.
4. Arora K.R., Surveying Vol I & II, 10th Edition, Standard Book house , 2008

24
1.
 19CE41 - CONSTRUCTION TECHNOLOGY

ASSESSMENT: THEORY L T P C
COURSE OUTCOME
3 0 0 3
After successful completion of the course, student will be able to

CO1: Understand building components and its construction process.

CO2: Demonstrate the types of brick and stone masonry

CO3: Describe types of roofs and floors

CO4: Classify the different types of staircases based on geometrical configurations, doors and windows.

CO5: Describe the requirements for fire safety, thermal and sound insulation in a building.

FOUNDATIONS

Introduction - Building components - Site selection - Functions of foundation -Requirements of good

foundation - Types of foundations- Selection, Description and Construction of Spread footing - Combined
footing - Strap footing - Raft foundation - Grillage foundation - Types of piles - Pile driving - Under reamed
pile foundation for black cotton soils - Setting out foundation - Excavation of foundation trenches -
Timbering of trenches - Excavation in ground with sub-soil Water - Anti-termite treatment - Pre-
construction & Post-construction treatment.

(9)

MASONRY

Types of bonds in brickwork - Construction methods in brickwork- 1½, 1, ½ thick brick walls-
Classification of stone masonry - Joints in stone masonry -Concrete block walls - Types of concrete blocks –
Construction Joints –need and materials used.

(9)

ROOFS AND FLOORS

Types of roofs - Flat, slope and curved - Types of roof truss - Wooden and Steel-Erection Methods- Purlins -
Types of roof coverings- aluminium, steel sheets, corrugated iron and tiles -Market sizes. Drainage in roofs-
slope and diameter - Flooring - Ground level flooring in poor Soils and Normal Soils. Floor-Different types
of flooring materials- advantages and disadvantages - Construction methods of different types of floors.
Causes and effect of dampness - Methods of damp proofing - Materials used for damp proofing course.

(9)

STAIRS, DOORS, WINDOWS AND FORM WORK

Staircase -Terminology and Specification- classification of staircase and its details -Construction details –
Vertical movement - Staircase, Ramps, Elevators and Escalators - Types of doors and windows and
ventilators - drawings - Materials for Doors and Windows - Standard sizes of Doors and Windows - Door
and Window Fixtures- Formwork - Requirements - shuttering for columns - Shuttering for beam and slab
floor - Formwork for Stairs & Walls. Shoring - Underpinning - various types of Scaffolding. (9)
25
1.
PLASTERING, PAINTING AND INSULATION

Plastering and pointing - Methods of plastering - Types of plastering- External wall cladding-Defects in
Plastering - Treatment and repair techniques for defects in plastering - Different types of pointing - Paints -
Types of paints - Paintings of Interior & Exterior walls, wooden and steel members-Fire protection - Fire
resisting properties of common building materials - Fire safety equipment for buildings - Thermal
Insulation and sound insulations.

(9)

TOTAL: 45 Hours

TEXT BOOK

1. Punmia. B.C., Ashok.K.Jain& Arun.K.Jain, "Building Construction", Laxmi Publications (P)

Ltd, New Delhi, 2016.
2. S. C. Rangwala “Building Construction”,Charotar Publishing House(P) Ltd, Gujarat, 2017.
3. P.C Varghese “Building Construction”, Prentice-Hall of India, New Delhi, 2011.

REFERENCE BOOKS

1. Sharma S.K. and Kaul B.K., "Building Construction", S.Chand & Company Ltd., New Delhi,
2013.
2. Sushil Kumar., "Building Construction", Standard Publishers distributors, New Delhi, 2016.
3. S.P.Arora and S.P.Bindra, “ Building Construction” Dhanpat Rai publications,2010.

ONLINE COURSES

1. https://nptel.ac.in/courses/105106053/
2. https://nptel.ac.in/courses/105/102/105102176

26
1.
 19CE42 -STRENGTH OF MATERIALS

ASSESSMENT: THEORY L T P C

COURSE OUTCOME 3 1 0 4
After successful completion of the course, student will be able to

CO1: Determine slope and deflection of statically determinate beams subjected to Point load and UDL.

CO2: Sketch Shear force and bending moment diagram for the given statically indeterminate beams
subjected to Point load and UDL.

CO3: Compute the stresses due to combined bending and axial load for short column and critical load
calculation in long columns

CO4: Compute stresses in thin, thick cylinders subjected to fluid pressure and member forces in simple
plane roof trusses.

CO5: Calculate the stresses due to unsymmetrical bending in the symmetrical and unsymmetrical sections
and locate the shear centre for thin walled open sections with one axis of symmetry.

DEFLECTION OF DETERMINATE BEAMS

Governing differential equation - slope and deflection of beams - Double Integration method - Macaulay's
method - Moment area method - Conjugate beam method

(12)

STATICALLY INDETERMINATE BEAMS

Analysis of propped cantilevers and fixed beams - Analysis of Continuous beams using Theorem of Three
moments.

(12)

THEORY OF COLUMNS

Short columns -Stresses due to combined bending and axial Force - core of section - unsymmetrical
sections - Elastic buckling of long columns - Euler's theory for long Columns - Critical loads with different
end conditions - limitations of Euler's theory - Rankine's formula.

(12)

THICK CYLINDER AND MEMBER FORCES IN TRUSS

Stresses in thin walled cylindrical shells - Wire wound cylindrical Vessels - Thick cylinder - Lame's
equations.

Plane roof trusses – Forces in the member - Method of Joints and method of sections

(12)

27
1.
UNSYMMETRICAL BENDING AND SHEAR CENTRE

Analysis of stresses and deflections due to unsymmetrical Bending - Significance of shear centre - Location
of shear centre for Thin walled open sections with one axis of symmetry

(12)

TOTAL: 60 Hours

TEXT BOOKS

1.Rajput,R.K.,"Essentials of Strength of Materials",S.Chand & Company Ltd.,NewDelhi,2015.

2.BansalR.K.,"StrengthofMaterials",LaxmiPublications,NewDelhi,2018.

3.Punmia B.C, Ashok jain and Arun jain, “Mechanics of Materials”, Lakshmi Publications, NewDelhi, 2017.

REFERENCE BOOKS

1.Beer F.P.,Johnston E.R.,DeWolf J.T. and Mazurek D.,"Mechanics of Materials",McGraw-Hill Higher

Education,6th edition,2011.

2. Negi L.S., "Strength of Materials",Tata Mc Graw Hill Education Pvt. Ltd,2017.

3. Sadhu Singh,"Strength of Materials",Khanna Publishers, NewDelhi,2016.

4.Prakash Rao D.S., "Strength of Materials” Volume I, Universities Press (India) Limited,Hyderabad,2004.

5.Lehri R.S.,Lehri A.S., "Strength of Materials",S K Kotaria & Press,NewDelhi,2012.

6. Timoshenko,S.P, Gere,J.M.,"Mechanics of Materials",CBS Publishers,New Delhi,2006.

7.Egor P .Popov, "Introduction to Mechanics of Solids", Prentice Hall of India, NewDelhi, 2003.

ONLINE RESOURCES

1. https://nptel.ac.in/courses/105105108/

2. https://nptel.ac.in/courses/112106141/

28
1.
 19CE43 TRANSPORTATION ENGINEERING

ASSESSMENT: THEORY L T P C
COURSE OUTCOMES:
3 0 0 3
After successful completion of the course, student will be able to

CO1: Interpret the types of Indian roads, organizations and pavements

CO2: Design the geometrical components for Indian roads

CO3: Demonstrate the organizational set up and features of Indian Railways

CO4: Design the components of permanent way in Railway Stations

HIGHWAY PLANNING

IRC, CRRI and NHAI-Classification of roads-Road patterns-Planning Surveys-Master Plan and Phasing of
master plan- New Highway alignment - Factors -Engineering surveys- Maximum dimension of road
vehicles and loaded weight-Passenger Car Units- Pavements – flexible – rigid – comparison – soil subgrade,
sub base and base course, wearing course - Highway drainage – significance – requirements

(9)

HIGHWAY GEOMETRIC DESIGN

Various Cross section elements - Friction, roughness, light reflecting characteristics-camber - IRC
standards- Right of way- Sight distance-Design of Horizontal Alignments- Super elevation- Widening of
pavement on horizontal curves-Transition curves-Types- Length-Examples. Design of vertical alignment-
Gradient-Types- Vertical curves -Summit curves, Valley curves- Examples. (9)

HIGHWAY CONSTRUCTION

Materials - Properties of road aggregates and tests - Bituminous materials - Types- Requirements – Tests to
determine the properties of Bitumen - Various Bituminous mixes - Highway construction procedures

(6)

ELEMENTS OF RAILWAY ENGINEERING

Comparison of railway and highway transport – organization of Indian railways – Railway board – Zonal
railways, Permanent way – Gauges – Railway Track cross section – coning of wheels – Rails, Rail joints –
Creep – effects- remedies – Sleepers – Ballast – Sub grade and Embankment –Track alignment- Surveys.
Gradients – super elevation and cant deficiency – Negative super elevation- Curves – points and crossings –
necessity –Turnouts – Switches – types of switches crossing–components, types

(12)

RAILWAY STATIONS AND SIGNALS

Stations and yards – requirements, classification, layout of station – Platform – Loops, siding and level
crossing – Loco sheds – Derailing switches, Fouling marks, Buffer stop – Sand hump – rolling stock-
Signalling –Object engineering principles – classification and types - Level crossings – Safety in Railways

(9)

Total: 45 Hours

29
1.
TEXT BOOK:

1. Khanna.S.K and Justo.C.E.G., "Highway Engineering", Khanna Publishers, Roorkee, 2001.

2. Saxena S.C and Arora S.P, “A Text book of Railway Engineering”, Dhanpat Rai Publications, New Delhi,
2005.
REFERENCE BOOKS:

1. Sharma S.K., "Principles, Practice and Design of Highway Engineering", S.Chand&co., New Delhi, 2012.
2. Kadayali., "Principles, Practice and Highway Engineering", Khanna Publishers, New Delhi, 2007.
3. J. S. Mundrey, “Railway Track Engineering”, Tata McGraw-Hill Education, New Delhi, 2010.
4. Clifford F. Bonnett, “Practical Railway Engineering”, Imperial College Press, London, 2005.
5. IRC Codes 15-2002, 37-2001, 38-1988, 52-1988, 62-1976, 66-1976, 73-1980, 58-2002 & IRC SP 23-
1993.
ONLINE RESOURCES:

1. https://nptel.ac.in/courses/105/101/105101087/
2. https://nptel.ac.in/courses/105/107/105107123/

30
1.
 19CE44 - APPLIED HYDRAULICS AND HYDRAULIC MACHINERY
ASSESSMENT: THEORY
COURSE OUTCOME L T P C
At the end of this course, the students will be able to
3 0 0 3
CO1: Obtain hydraulically best section for uniform flow in open channel and find the flow
parameters through notches, weirs and flumes.
CO2 : Compute the flow characteristics of non-uniform flow in open channels based on geometrical and
flow parameters.
CO3 : Analyse relative and absolute velocity on flat and curved vanes in rest and motion.
CO4 : Evaluate the performance tests on different types of hydraulic turbines.
CO5 : Estimate the performance parameters of different pumps and its applications.
UNIFORM FLOW IN OPEN CHANNELS

Uniform flow - Chezy's equation - Manning's equation - hydraulically best section for rectangular,
trapezoidal and circular channels - circular sections running partially full - Flow over notches and weirs –
flumes.

(9)
NON-UNIFORM FLOW IN OPEN CHANNELS

Non-uniform flow - critical depth - specific energy - flow characteristics - hydraulic jump - backwater
curves - surges in channel.

(9)
IMPACT OF JETS

Impulse momentum principle - its applications on impact of liquid jets on plates and vanes at rest and in
motion - moment of Momentum equation - its applications on plates and vanes mounted on wheels – jet
propulsion.

(9)
TURBINES

Classifications - Applications of Impact of Jets on Vanes to Turbines - velocity triangles - work done and
efficiencies - Study of Pelton wheel, Francis turbine and Kaplan turbine - characteristics curves -
performance of turbines - specific speed – unit quantities - model testing of turbines - selection of turbines.
(9)
PUMPS

Classification - Centrifugal pumps - work done - minimum starting speed - NPSH - characteristic curves -
multistage pumps - specific speed - model testing

Reciprocating pump - work done - effect of acceleration and friction on pressure head - maximum speed of
the pump - air-vessels - work saved against friction (9)

TOTAL: 45 Hours

31
1.
TEXT BOOKS

1. Bansal.R.K., "A TextBook of Fluid Mechanics and Hydraulic Machines", M/s. Lakshmi Publications,
Madras, 2017.

2. Modi.P.N, & Seth.S.M., " Hydraulics, Fluid Mechanics & Hydraulic Machinery", Metropolitan Book
Company, New Delhi, 2017.

3. Arora K.R., "Fluid Mechanics, Hydraulics and Hydraulic Machines", Standard Publishers & Distributors,
2014.

REFERENCE BOOKS

1. Kumar.K.L, "Engineering Fluid Mechanics,'' M/s. S. Chand Co., Madras.2006.

2. Ramamrutham.S, "Fluid Mechanics, Hydraulics & Fluid Machinery", M/s. Dhanpat Rai & Sons, New Delhi,
2018.

3. R.K.Rajput, “A TextBook of Fluid Mechanics and Hydraulic Machines”, M/s. S. Chand Publications, New
Delhi, 2016.

4. R.S. Khurmi, “A TextBook of Hydraulics, Fluid Mechanics and Hydraulic Machines”, M/s. S. Chand
Publications, New Delhi, 2014.

ONLINE RESOURCES

1. https://nptel.ac.in/courses/105103021/
2. https://nptel.ac.in/courses/105103096/

32
1.
 19CE45- WASTE WATER ENGINEERING

ASSESSMENT: THEORY L T P C
3 0 0 3
COURSE OUTCOME

At the end of this course, the student will be able to

CO1: Recognize the origin and importance of effective conveyance of domestic sewage.

CO2: Analyse the hydraulic components of sewage and design sewers including sewage pumping stations.

CO3: Summarize the perspectives of various house drainage systems.

CO4: Demonstrate the physico-chemical and bio-chemical characteristics of domestic Sewage and also
deploy the appropriate conventional treatment schemes.

CO5: Design sludge digesters and also to justify the effluent disposal standards and sludge disposal.

SEWERAGE SYSTEMS

Introduction - Necessity and objectives of sanitary engineering projects - Definitions - systems of Sanitation
- Quantity of sanitary sewage - variation in quantity of sewage - quantity of storm sewage - Characteristics
and composition of sewage - effluent standards - Sampling of sewage - Examination of sewage - DO,
BOD,COD and their significance - Cycles of decomposition.

(9)

DESIGN OF SEWERS

Components and design period - Hydraulics of sewers - Self cleansing velocity, non-scouring velocity -
Design of sewers - Sewer appurtenances - Drains and sewer section - Sewer materials and sewer joints -
Construction and maintenance of sewer - Pumping of sewage –House drainage - Sanitary fixtures / fittings -
systems of plumbing - General layout of house drainage - street connections - Testing of house sewers -
Septic tanks and effluent disposal system.

(9)

PRIMARY TREATMENT OF SEWAGE

Objectives and basic principles of sewage treatment - Preliminary treatment - screens – Grit chamber - and
Skimming tank - Design of Grit chamber - Primary treatment - Principles of sedimentations - Sedimentation
tank types - surface overflow rate - detention time and Design of primary settling tanks.

(9)

SECONDARY TREATMENT

Basic principles of biological treatment - types - suspended and attached growth process - Activated sludge
process (ASP) - flow diagram - process modification of ASP - aeration - diffuser, mechanical aeration -
Design of ASP - Trickling filters - types - comparison and construction - recirculation - Recirculation ratio,
operational problems - design of high rate and standard rate filters - Process description of Sequential
batch reactor (SBR), Upflow anaerobic sludge blanket reactor (UASBR), fluidized bed reactor (FBR), packed
bed reactor(PBR) and extended bed reactor (EBR) - Waste stabilisation ponds - Oxidation ponds and
Aeration lagoons.

(9)
33
1.
SLUDGE DIGESTION AND DISPOSAL

Sludge disposal - Sludge volume calculation - Sludge characteristics - sludge digestion - Digestion process -
stages - Design of sludge digesters - Disposal of digested sludge - Use of lagoons for disposal of raw sludge -
Advantages in sludge treatment and disposal - Effluent disposal - Standards for disposal - Disposal
methods – Dilution - zones of pollution in lakes - Eutrophication - self-purification of streams - oxygen sag
curve - Land disposal.

(9)

TOTAL: 45 Hours

TEXT BOOKS

1. Garg S. K., "Environmental Engineering", Vol. I & Vol. II, Khanna Publishers, New Delhi, 1994.
2. Birdie G.S., and Birdie, “Water Supply And Sanitary Engineering”, Dhanpat Rai Publishing Company
(P) Ltd. New Delhi, 2011.
3. Metcalf and Eddy, "Wastewater Engineering Treatment, Disposal and Reuse", McGraw-Hill
Publishing Co, Indian Edition, New Delhi, 2005.

REFERENCE BOOKS

1. Manual on wastewater and treatment CPHEEC, Ministry of Urban Affairs and Employment, Govt. of
India, New Delhi, 1990.
2. Shah C. S., "Water supply and Sanitation", Galgotia publishing company, New Delhi, 1994.
3. Mark J. Hammer, "Water and Waste Water Technology", Prentice hall of India 2008.
4. Hussain S. K., "Text Book of Water Supply and Sanitary Engineering", Oxford and IBH, 1976.
5. Duggal K.N., "Elements of public Health Engineering", S.Chand and Company Ltd, New Delhi, 1998.

Online Courses:

1. https://nptel.ac.in/courses/105/106/105106119/

2. https://nptel.ac.in/courses/105/105/105105048/

34
1.
 19CE46 PROFESSIONAL PRACTICE AND ETHICS

ASSESSMENT: THEORY L T P C
3 0 0 3
COURSE OUTCOMES:
After successful completion of the course, student will be able to
CO1: Acquire the knowledge of Building by laws and regulations and plan approval methods
CO2: Perform and establish approval process for any type of buildings including electrical supply and
water supply.
CO3: Able to execute the Fundamentals for establishment of individual firms, registration with government
agencies and membership in professional bodies.
CO4: Able to perform documentation and preparation of bills from commencement till the closure of the
project.

CO5: Perform ethics and fundamentals in establishing professional practice with social responsibility.

BUILDING BY LAWS RULES AND REGULATION AND PLAN APPROVAL PROCESS

Building by laws - importance - acts and rules of public interest - state and central – approval bodies–
Metros – Corporation – Municipalities - Town Panchayats. Preparation and Submission of Drawings and
Documents for Building Approval and Layout. Land use Classification in urban & Mofussil Areas-Related
Regulatory and approvals

(9)

MUNICIPAL SERVICES (WATER SUPPLY SEWAGE AND ELECTRICAL CONNECTIONS

Local approvals and clearances for residential, industrial and commercial Buildings - General specifications
for water supply and sewers - Water Supply – Process for waste water connections to public Mains.
Domestic water supply connection from public mains, types and sizes of pipes, special installation in multi-
storeyed buildings. Connections to Public sewers.

General Specifications - Electrical supply for residential, industrial and commercial Buildings - List of
procedures – Standards - Local approvals and clearances for residential, industrial and commercial
Buildings-Temporary – Permanent Services-Consumer Guidance TNEB.

(9)

ESTABLISHMENT FOR PROFESSIONAL PRACTICE

Establishment of firm - Consultancy, Construction - Registration of firms with GST, CST, Companies –IT -
Licensing from local bodies – Metros - Municipalities, town panchayats - Obtaining Chartered Engineership,
approved valuership, registered valuership with income tax, Bank empanelment-Membership of other
professional bodies- BAI, ACCE(I) Etc., - Registration of contractors with Government Departments, Public
undertakings & Private organizations.
(9)

35
1.
DOCUMENTATION FOR PROJECT COMMENCEMENT AND CLOSURE AND TAX ASSESSMENT

Documentation for formal approval of work commencement - Procedures. Documentation for procurement
and mobilization of resources – Record of works – Changes - Deviation - Preparation of running account bill
& Final bill. Submission of project closure report. Handing over documents -Procedure for contract closure.
(9)

ROLES AND RESPONIBILITIES

Professional Ethics – Definition of Ethics, Professional Ethics, Business Ethics, Corporate Ethics,
Engineering Ethics, Personal Ethics; Code of Ethics as defined in the website of Institution of Engineers
(India); Profession, Professionalism, Professional Responsibility, Professional Ethics; Conflict of Interest,
Gift Vs Bribery, Environmental breaches, Negligence, Deficiencies in state-of-the-art; Vigil Mechanism,
Whistle blowing, protected disclosures. Multinational Corporations – Business Ethics - Environmental
Ethics –Role in Technological Development – Engineers as Managers – Consulting Engineers – Engineers as
Expert Witnesses and Advisors – Honesty – Moral Leadership – Sample Code of Conduct.

(9)

Total: 45 Hours

TEXT BOOKS:
1. Dutta B.N., “Estimating and Costing in Civil Engineering”, UBS Publishers & Distributors Pvt.
Ltd., 2010.
2. Kohli D.D. and Kohli R.C., “A Text Book of Estimating and Costing (Civil)”, Chand &
Company Ltd., 2004.
3. W.M.Martin & R.Schinzinger.,”Ethics in Engineering”-, McGraw-Hill, 2005

REFERENCE BOOKS:
1. Hand Book of Consolidated Data - 8/2000, Vol.1, TNPWD.
2. Tamil Nadu Transparencies in Tenders Act, 1998, Standard Data Book for Analysis and Rates,
IRC, New Delhi, 2003.

ONLINE RESOURCES:
1. Manual of Professional practice for civil engineers - https://pdfslide.net/documents/pice-manual-
of-professional-practice-for-civil-engineers.html
2. TNEB - https://www.tangedco.gov.in/procedure.html
3. Municipal Administration & Water Resources Department -
https://cms.tn.gov.in/sites/default/files/go/maws_e_18_2019_0.pdf

36
1.
 19CEL47 HYDRAULICS LABORATORY
L T P C
ASSESSMENT: PRACTICAL
0 0 2 1
COURSE OUTCOMES:
CO1: Examine the flow meters through venturimeter and Orifice meter and the losses of flow of water
through pipes.

CO2: Compute the rate of flow of water from a tank and in an open channel

CO3: Examine the Bernoulli’s theorem for varying cross section of pipe flow.

CO4: Determine the metacentric height of the model of the ship in hydrostatic condition.

CO5: Find the performance of centrifugal, reciprocating pumps, Pelton and Francis turbines through
characteristics curves.

LIST OF EXPERIMENTS

1. Calibration of flow meters

2. Flow through pipes – Major & Minor losses
3. Flow through Orifices & Mouthpieces
4. Flow over Notches
5. Verification of Bernoulli’s Theorem
6. Metacentric Height
7. Impact of Jets
8. Performance of Pumps
9. Performance of Turbines

REFERENCE BOOKS:

1."Hydraulic Engineering Laboratory Instruction Manual", Published by the Department of Civil

Engineering, CIT, Coimbatore, 2015.
2. Bansal.R.K., “Text Book of Fluid Mechanics and Hydraulic Machines”, M/s.Lakshmi Publications,
Madras,2010.
3. Kumar.K.L, “Engineering Fluid Mechanics”, M/s.S.Chand Co., Madras.2003.

37
1.
 19CEL48 ENVIRONMENTAL ENGINEERING LABORATORY

ASSESSMENT: PRACTICAL L T P C
COURSE OUTCOME 0 0 2 1

At the end of this course, the students will be able to

CO1 : Ascertain the suitability of water samples for drinking and construction purpose.

CO2 : Ascertain the suitability of wastewater samples as per effluent standards.

CO3 : Select the degree of treatment based on the results of water and wastewater samples.

LIST OF EXPERIMENTS
1. Determination of Acidity of the given Water/Wastewater Sample.
2. Determination of Alkalinity of the given Water/Wastewater Sample.
3. Determination of Hardness of the given Water/Wastewater Sample.
4. Estimation of Chlorides in the given Water/Wastewater Sample.
5. Determination of Dissolved Oxygen Content in the given Water/ Wastewater Sample.
6. Assessment of Settleable, Total, Volatile, Fixed, Dissolved and Suspended Solids in Water/Wastewater
Sample.
7. Determination of pH and Assessment of Optimum Coagulant Dose (OCD) to treat the given
Water/Wastewater sample.
8. Assessment of Available Chlorine in the given Bleaching powder sample and Estimation of Residual
Chlorine of the given Polluted Water/Wastewater Sample.
9. Assessment of Biochemical Oxygen Demand (BOD) of the given Water/Wastewater Sample.
10. Assessment of Chemical Oxygen Demand (COD) of the given Water/Wastewater Sample.
REFERENCES:
1. "Environmental Engineering Laboratory manual", Published by the Department of Civil Engineering,
Coimbatore Institute of Technology, Coimbatore, 2018.
2. IS 10500, Drinking water Specification, Bureau of Indian Standards, New Delhi, 2012.
3. IS 3025, Methods of sampling and test (physical and chemical) for water and wastewater. Bureau of
Indian Standards, New Delhi, 1986.
ONLINE RESOURCES:
1. https://nptel.ac.in/courses/103107084/

38
1.
 19CE51- STRUCTURAL ANALYSIS I

ASSESSMENT: THEORY L T P C
COURSE OUTCOME
After successful completion of the course, students will be able to 3 0 0 3
CO1 : Compute static and kinematic indeterminacy of structures.
CO2 : Calculate the forces of pin jointed plane and space trusses by method of tension
coefficient.
CO3 : Apply energy concepts and theorems to determine the deflection of statically determinate
beams, frames and plane trusses
CO4 : Analyze statically indeterminate beams and trusses by consistent deformation method.
CO5 : Analyze two hinged and three hinged parabolic and circular arches to determine bending
moment, axial thrust and radial shear force.
CO6 : Construct influence line diagrams for concentrated and distributed moving loads and
analyze determinate and indeterminate beams.

FUNDAMENTALS OF STRUCTURAL ANALYSIS AND ANALYSIS OF PIN JOINTED SPACE

TRUSSES
Determination of static and kinematic indeterminacy- Principle of superposition- Analysis of Pin-
jointed plane and space trusses by Method of Tension coefficient. (9)

ENERGY CONCEPTS
Strain energy and Complementary energy - Deflection by strain energy method for statically
determinate beams. Virtual work - principle of virtual work for deformable bodies- unit load
method - Deflection of determinate beams and plane trusses. Castigliano's theorems - deflection
calculation for simple determinate beams - Maxwell's reciprocal theorem for deflection (9)

ANALYSIS OF STATICALLY INDETERMINATE BEAMS AND PLANE TRUSSES

Analysis of statically indeterminate beams - Consistent deformation method - Theorem of least
work (beams upto 2 degrees of freedom only). Analysis of statically indeterminate plane trusses
by Consistent deformation method - Lack of fit - settlement and temperature effects (9)
ANALYSIS OF ARCHES
Analysis of three hinged arches of parabolic and circular profiles - Analysis of two hinged
symmetric parabolic and circular arches. Settlement and temperature effects. (9)

MOVING LOADS AND INFLUENCE LINES

Influence lines for shear force, bending moment and reactions in statically determinate beams -
Calculation of shear force and bending moment due to concentrated and distributed moving loads
- Influence lines for forces in members of statically determinate plane trusses. Influence lines for
reactions, shear force and bending moment in statically indeterminate beams by Muller-Breslau
principle - Application of Muller Breslau principle to beams with degree of static indeterminacy
not exceeding one. (9)

TOTAL: 45 Hours

TEXT BOOKS
1. Gupta S.P and Pandit G.S, "Theory of Structures, Vol. I & II", Tata McGraw Hill, New Delhi, 2012.
2. Bhavikatti S.S, "Structural Analysis" Vol. I & II, Vikas Publishing House (P) Ltd., New Delhi, 2011.
39
1.
3.Vaidyanathan. R, and Perumal. P. “Structural Analysis”, Vol. I & II, Laxmi Publications (P) Ltd.,
New Delhi, 2008.

REFERENCE BOOKS
1. Rajasekaran S. and Sankarasubramanian G., "Computational Structural Mechanics" Prentice
Hall of India, New Delhi, 2012.
2. Prakash Rao D.S., "Structural Analysis", Universities Press, Hyderabad, 2001.
3. Armenakas A.E., "Classical Structural Analysis", Mc-Graw Hill Book Co., NewYork, 1995.
4. Reddy C.S, "Basic Structural Analysis", Tata Mc-Graw Hill, New Delhi, 2012.
5. Junnarkar and Shah., "Mechanics of Structures" Vol.II, Charotar Publishing House, Anand,
2012.
6. Punmia B.C and A.K.Jain, "Strength of Materials and Theory of Structures", Vol.II, Laxmi
Publications, New Delhi, 2005.
7. Wang C.K, "Intermediate Structural Analysis", Tata Mc-Graw Hill, New Delhi, 2010.
8. Ramamrutham. S. and Narayan R., “Theory of Structures” Dhanpatrai Publishing Company (P)
Ltd., New Delhi, 2016.

ONLINE RESOURCES
1. https://nptel.ac.in/courses/105/105/105105166/

40
1.
 19CE52 - DESIGN OF REINFORCED CONCRETE STRUCTURAL ELEMENTS

ASSESSMENT: THEORY L T P C
COURSE OUTCOMES: 3 0 0 3
On successful completion of this course, the student will be able to
CO1: Identify the relevant material properties of concrete and steel, evaluate the connected
strength parameters as per (LSM) and codal provisions of IS 456, 2000. Distinguish between the
WSM and LSM and infer the benefits of LSM.
CO2 : Assess design loads, compute design strength required in flexure, shear, torsion and bond
for Under-Reinforced, Doubly Reinforced and Flanged beams, apply design parameters as per
LSM and IS 456 to satisfy both strength and serviceability criteria. Using LSM, analytically
compute design strengths of existing beams. Complete structural detailing as per SP34.
CO3: Assess design loads, compute design strength required in flexure, shear and bond for one
way, two way and staircase slabs to fulfill both strength and serviceability criteria as per IS 456 .
Using LSM, analytically compute design strengths of existing slabs. Complete structural detailing
as per SP34.
C04: Using interaction charts; compute design strengths as per LSM for both short and long
columns in axial compression uniaxial and biaxial bending as per codal provisions. Analytically be
able to evaluate structural strengths of existing columns. Complete structural detailing as per
SP34.
CO5: Design as per LSM for strength in flexure, shear and bond for concrete wall footings, isolated
and combined column footings. Apply IS 456 provisions for serviceability criteria of LSM.
Complete structural detailing as per SP34.

MATERIALS FOR CONCRETE AND CONCEPT OF LIMIT STATE DESIGN

IS code regulations - Materials for concrete - Stress - Strain curve for concrete in compression –
Concrete Grades, Types, Mix proportioning - Types of reinforcement, Grades - Plain and deformed
bars - Stress - strain curve for reinforcing steel. Concept of WSD (No problems) and LSD -
Difference between WSD and LSD - Characteristic loads and strengths - partial safety factor.
Design of singly reinforced rectangular beams for flexure, shear and torsion. (9)

LIMIT STATE DESIGN OF BEAMS

Design of doubly reinforced rectangular and flanged beams for flexure, shear and torsion. Design
of continuous beams using B.M. and S.F. coefficients as per IS code - detailing. (9)

LIMIT STATE DESIGN OF SLABS

Types of slabs - Design of one-way simply supported and continuous slab using BM and SF co-
efficient as per IS code - design of two way, simply supported and continuous slab as per IS code
Detailing. Staircase, Loads and types, Design of dog legged staircase slab and flat slab with drop -
Detailing. (9)

LIMIT STATE DESIGN OF COLUMNS

Design of short and long rectangular and circular columns subjected to axial compressive load -
Design of short columns subjected to combined axial compressive load, uni-axial and biaxial
bending moments using Interaction Charts- Detailing. (9)

41
1.
DESIGN OF FOOTINGS
Design of wall footings - Design of isolated, square and rectangular footings for axial loads and
bending, combined rectangular footings for axial loads - Detailing. (9)

TOTAL: 45 Hours
TEXT BOOKS
1. Unnikrishna Pillai and Devadas Menon, "Reinforced Concrete Design", Tata McGraw Hill
Publishing Co, New Delhi, 2011.
2. Varghese PC., "Limit State Design of Reinforced Concrete", Prentice Hall of India Pvt. Ltd., 2004.

REFERENCE BOOKS
1. Subramanian N., "Design of Reinforced Concrete Structures", Oxford University Press, 2008.
2. Sinha N.C., and Roy S.K., "Fundamentals of Reinforced Concrete", S.Chand and Company, New
Delhi, 2013.
3. Sinha S.N., "Reinforced Concrete Design", Tata McGraw - Hill Publishing Co, Ltd., New Delhi,
2012.
4. MacGregor J.G., "Reinforced Concrete Mechanics and Design", Prentice Hall, New Jersey, 2011.
5. Mallick S.K., and Gupta, A.P., "Reinforced Concrete", Oxford & IBH Publishing Co., New Delhi,
2012.
6. Ashok K Jain, "Reinforced Concrete Limit State Design". New Chand Bros, Roorkee, 2012.
7. Krishna Raju N. and Pranesh R.N., "Reinforced Concrete Design-IS:456 - 2000, Principles and
Practice" New Age International Publishers, New Delhi, 2003.
8. Syal I. C., and GoelA.K.,"Reinforced Concrete Structure", A. H . Wheeler & Co, 2004.
9. IS: 456 - 2000, Indian Standard Code of Practice for Reinforced Concrete, Bureau of Indian
Standards, New Delhi.
10. SP- 16 - 1980, Design Aids for reinforced Concrete, Bureau of Indian Standards, New Delhi.
11. SP- 24 – 1983, Explanatory Handbook for IS Code of Practice for Plain and Reinforced
Concrete,Bureau of Indian Standards, New Delhi.
12. SP - 34 - 1987, Hand Book on Concrete Reinforcement and Detailing, Bureau of Indian
Standards, New Delhi.

42
1.
 19CE53 - MECHANICS OF SOILS
ASSESSMENT: THEORY L T P C
COURSE OUTCOME
On completion of the course, the students will be able to: 3 0 0 3
CO1: Determine the properties of soil and classify them.
CO2: Apply the principles of water flow through soil medium and estimate permeability of soil.
CO3: Estimate the vertical stresses acting on soil for the given load condition.
CO4: Understand and determine the phenomenon of consolidation and compaction of soil.
CO5: Estimate the shear parameters of soils and analyze the stability of slopes.

INTRODUCTION
Soil formation and soil types - Civil engineering problems related to soils - Nature of soil - Simple
definitions - Phase relationships - Classification - IS Classification system. Compaction - Factors
affecting compaction - Laboratory and field compaction methods. (9)

SOIL WATER
Principles of water flow - Darcy's law - Permeability - Laboratory Methods - Field measurement of
permeability - Effective stress concept - Dry and saturated soils. (9)

STRESS DISTRIBUTION AND CONSOLIDATION

Stress distribution in soil media - Bousinesq's Analysis - Westergaard's Analysis - Intensity of
vertical stress using influence charts. Consolidation - measurement of compressibility - e-log P
curves - Terzaghi's one dimensional consolidation theory - Determination of coefficient of
consolidation. (9)

SHEAR STRENGTH
Shear at a point - Mechanism of shear resistance - Mohr- Coluomb failure criterion - measurement
of shear strength - Direct shear test - Triaxial shear test - Unconfined compression strength test –
Vane shear test - Shear strength of clay soil - Shear strength of sand. (9)

STABILITY OF SLOPES:
Types of slopes - Stability of infinite slope - Stability of Finite slope - Total stress Analysis -
Swedish circle method - Use of Taylor's stability number - Slope failure mechanism - Effect of
Tension cracks. (9)

TOTAL: 45Hours

TEXT BOOKS
1. Gopal Ranjan and Rao, ASR, "Basic and Applied Soil Mechanics" New Age International (P)
Limited Publication, New Delhi, Second Edition, 2010.
2.Venkataramaiah, "Geotechnical Engineering", New Age International Ltd., New Delhi Third
Edition, 2012.
3.Punmia, B.C, "Soil Mechanics and Foundation Engineering", Laxmi Publications, New Delhi,
Sixteenth Edition, 2005.

REFERENCE BOOKS
1. Alam Singh, "Modern Geotechnical Engineering", IBS Publications, New Delhi, 2010.
43
1.
2. Muni Budhu, "Soil Mechanics and Foundation Engineering", Wiley India Publication, New Delhi,
Second Edition, 2010.
3. Braja M. Dass and Khaled Sobhan,“Principles of Geotechnical Engineering" Cengage learning,
2013.

ONLINE RESOURCES
1. https://nptel.ac.in/courses/105/101/105101201/

44
1.
 19CE54- CONCRETE TECHNOLOGY
ASSESSMENT: THEORY
L T P C
COURSE OUTCOME
After successful completion of the course, student will be able to 3 0 0 3
CO1 : Assess the properties and select the concrete ingredients.
CO2 : Design the concrete mix as per IS code and ACI specifications.
CO3 : Employ the different methods of manufacture of concrete.
CO4 : Evaluate the properties of fresh and hardened concrete as per code
requirements.
CO5 : Identify the appropriate special concrete for a specific requirement.

CEMENT AND AGGREGATES

Types of cement - properties and specific uses of various cements - Tests on cement -Fineness -
Setting time – Consistency -Soundness - compressive strength. Properties of aggregates - shape,
texture, bond, strength, soundness and thermal properties - grading - bulking of sand - Tests on
aggregates - Flakiness index - Elongation index - Crushing value – Impact value- Abrasion value.
(9)

WATER, ADMIXTURES AND CONCRETE MIX DESIGN

Quality of water for mixing and curing - use of Sea water for mixing concrete. Air-entraining
agents - Accelerators - Retarders - Pozzolona - Water proofing agents - workability agents -
plasticizers - super plasticizers. Factors affecting mix proportion - Water cement ratio - Aggregate
cement ratio - Mix design by I.S.method and ACI method (9)

MANUFACTURE OF CONCRETE
Measurement of materials - Volume batching and weigh batching - Mixing of concrete - Types of
mixers-Transporting of concrete - Placing of concrete - Compaction of concrete - Methods of
compacting concrete- Tamping - Vibration - Vibroprocessing - Jolting - Rolling - Centrifugation -
Curing of concrete - Different methods of curing. (9)

PROPERTIES AND TESTS ON FRESH AND HARDENED CONCRETE

FRESH CONCRETE
Workability Tests - Slump Test - Compacting factor Test - Flow test - Kelly Ball test - Vee Bee
consistometer test - segregation and Bleeding.

HARDENED CONCRETE
Compressive Strength of concrete - Modulus of Rupture -Tensile Strength - Modulus of elasticity -
Bond stress - Shrinkage of concrete - Factors affecting shrinkage of concrete - creep - Factors
influencing creep - Factors affecting permeability - Thermal properties (9)

QUALITY CONTROL AND SPECIAL CONCRETES

Sampling - Frequency of sampling - Standard deviation - acceptance criteria as per IS 456 - 2000.
Light weight concrete - Fibre Reinforced Concrete - High density Concrete - Polymer Concrete -
Ferrocement- Shotcreting - Hot weather concreting - Cold weather concreting - High strength
concrete - High performance concrete - Self compacting concrete - Ready mixed Concrete. (9)
TOTAL: 45Hours
45
1.
TEXT BOOK
1. Shetty M.S., "Concrete Technology", S.Chand and Company Ltd, New Delhi, 2018

REFERENCE BOOKS
1. Neville.A.M., "Properties of Concrete", Pearson Education Limited, 2012.
2. Santhakumar A.R., "Concrete Technology" Oxford University Press, New Delhi, 2018
3. Krishnasamy K.T., "Concrete Technology", Dhanpat Rai, New Delhi, 2014.
4. Gambhir M.L., "Concrete Technology", Tata McGraw Hill Publishing Company Limited, New
Delhi, 2017.
5. IS 456- 2000 : Indian Standard Code of Practice for Plain and Reinforced Concrete, BIS, New
Delhi.
6. IS 10262-2019 : Guidelines for Concrete Mix Design proportioning.

ONLINE RESOURCES
1. https://nptel.ac.in/courses/105/102/105102012/

46
1.
 19CEL55 - COMPUTER AIDED CIVIL ENGINEERING DRAWING
ASSESSMENT: PRACTICAL
L T P C
COURSE OUTCOME
At the end of this course, the students will be able to 0 0 2 1
CO1 : Create site plan, landscape design and arrange the components of building
to satisfy the functional and orientation aspect as per National Building Code.
CO2 : Develop detailed drawings of plan, elevation and section of Buildings by manual and
computer aided drawing
CO3 : Prepare drawings of types of doors, windows and staircases.
CO4 : Prepare the plumbing and electrical layout of a building.

DRAFTING TECHNIQUES
Architectural lines and pencils used - Architect's scales, templates, flexible rules, overlays, under
lays - Architectural lettering - Layout of Drawing for presentation and submission.
BASIC HOUSE DESIGN
Concept of one and two storey - Split level design. Study of Function, location, shape and size and
planning of the following building areas.
Living areas - living rooms, dining room entry way, foyer, patios and porches.
Sleeping areas - bedrooms with and without attached toilets.
Service areas - Kitchen, cabinets, Toilets, washing places, garages.
Fixing the size of doors, windows and sunshades.
PREPARATION OF DRAWINGS
Detailed drawings of floor plans, elevations and sections to show various features in a building.
Preparation of plot plans with a study of property lines - location of building on the site -
Landscape plot plans.
PREPARATION OF WORKING DRAWINGS
Detailed drawings of different types of doors, windows with specifications.
Detailed layout design and drawing of different types of staircases.
Detailed planning and drawing of electrification and Plumbing layout in buildings.
Preparation and submission of building drawing using AutoCAD.

TEXT BOOK
1. Shah. M.G, Kale. C.M and Patki. S.Y, "Building Drawing", Tata McGraw Hill Book Co., 2007.

REFERENCES BOOKS
1. Clois E.Kicklighter., "Architecture, Residential Drawing and Design", The Good Heart - Willcox
Company Inc., 2000.
2. Donald E. Hepler and Paul I. Wallach., "Architecture, Drafting and Design", Tata McGraw Hill
Book Co., New Delhi, 1998.
3. Sikka V.B., A Course in Civil Engineering Drawing, 4th Edition, S.K.Kataria and Sons, 2015.
4. Verma.B.P., Civil Engineering Drawing and House Planning, Khanna Publishers, 2010.
47
1.
ONLINE RESOURCES:
1. www.sketchup.com
2. www.autodesk.in/products/3ds-max/overview

48
1.
 19CEL56 - HIGHWAY ENGINEERING LABORATORY
ASSESSMENT: PRACTICAL
L T P C
COURSE OUTCOMES:
0 0 2 1
After successful completion of the course, student will be able to
CO1: Determine the properties of Coarse aggregate related to highway requirements for laying
pavement
CO2: Evaluate the properties of Bitumen related to flexible pavement

LIST OF EXPERIMENTS
TESTS ON COARSE AGGREGATE
1. Los Angeles Abrasion Test
2. Impact Test
3. Shape Test
4. Water Absorption and Specific Gravity Test.
5. Sieve Analysis Test
6. Bulk Density Test
7. Moisture Content Test
8. Crushing Test

TESTS ON BITUMEN

1. Ductility Test
2. Viscosity Test
3. Softening Point Test
4. Penetration Test

REFERENCE BOOKS
1. Highway Material Testing – S.K.Khanna & C.E.G. Justo, Nem Chand & Bros, Roorkee, 2013.
2. Bureau of Indian Standard Code of Practice for
 Particle Size and Shape IS 2386 – Part I , 2016
 Specific gravity, Density, Voids, Adsorption and Bulking IS 2386 – Part III, 2016
 Mechanical Properties IS 2386 – 1963 Part IV, 2016

ONLINE RESOURCES
1. https://ts-nitk.vlabs.ac.in/transportation-engineering/List%20of%20experiments.html
2. http://vlabs.iitb.ac.in/vlabs-dev/labs/nitk_labs/Transportation_Engineering_Lab/
index.html

49
1.
 19CE61 STRUCTURAL ANALYSIS II
ASSESSMENT: THEORY
COURSE OUTCOME L T P C
At the end of this course, the students will be able to
3 0 0 3
CO1 : Analyze statically indeterminate structures by slope deflection method.
CO2 : Analyze continuous beams and plane frames using moment distribution method.
CO3 : Formulate flexibility matrix and apply to analyse indeterminate structures.
CO4 : Formulate stiffness matrix and apply to analyse indeterminate structures.
CO5 : Outline the basic concepts, applications and limitations of Finite Element Method.

SLOPE DEFLECTION METHOD

Application of slope deflection method to the analysis of statically indeterminate beams and rigid
jointed plane frames - Effects of settlement of supports for beams only (Examples on structures

having Kinematic indeterminacy not exceeding three). (9)

MOMENT DISTRIBUTION METHOD

Stiffness and carry over factors - Application of the method to the analysis of continuous beams
and rigid jointed plane frames- effects of settlement of supports - Symmetric and skew symmetric
loadings. (9)

MATRIX FLEXIBILITY METHOD

Element flexibility - Structure flexibility - Formulation of Structure flexibility matrix -
Determination of forces - Application to simple indeterminate beams, frames and trusses. (9)

MATRIX STIFFNESS METHOD

Element stiffness - Structure stiffness - Formulation of Structure stiffness matrix - Application to
simple indeterminate beams, frames and trusses. (9)

INTRODUCTION TO FINITE ELEMENT METHOD

Basic steps - Concept of an element - Various element shapes - Application of Finite Element
Method - Limitations - Element stiffness matrix for one dimensional members - Procedure of
assembly and solving equations (No problems). (9)
TOTAL: 45 Hours
TEXT BOOKS
1. Gupta S.P and Pandit G.S, "Theory of Structures, Vol. I & II", Tata McGraw Hill, New Delhi,
2012.
2. Bhavikatti S.S, "Structural Analysis" Vol. I & II, Vikas Publishing House (P) Ltd., New Delhi,
2011.

50
1.
 3. Vaidyanathan R. and Perumal P., “Structural Analysis”, Vol. I & II, Laxmi Publications (P)
Ltd., New Delhi, 2008.
REFERENCE BOOKS
1. Rajasekaran S. and Sankarasubramanian G., "Computational Structural Mechanics,"
Prentice Hall of India, New Delhi, 2012.
2. PrakashRao D.S., "Structural Analysis", Universities Press, Hyderabad, 2001.
3. Armenakas A.E., "Classical Structural Analysis" Mc-Graw Hill Book Co., New York, 1995.
4. Reddy C.S, "Basic Structural Analysis", Tata Mc-Graw Hill, New Delhi, 2012.
5. Junnarkar and Shah., "Mechanics of Structures" Vol.II, Charotar Publishing House, Anand,
2012.
6. Punmia B.C and A.K.Jain "Strength of Materials and Theory of Structures", Vol.II, Laxmi
Publications, New Delhi, 2005.
7. Wang C.K, "Intermediate Structural Analysis", Tata Mc-Graw Hill, New Delhi, 2010.
8. Krishnamoorthy C.S., “Finite Element Analysis, Theory and Programming,” Tata McGraw
Hill Company, 2008.
9. Reddy J.N., "An Introduction to the Finite Element Method", Tata McGraw Hill Company,
NewDelhi, 2005.

51
1.
 19CE62 - DESIGN OF STEEL STRUCTURES
ASSESSMENT: THEORY L T P C
COURSE OUTCOME 3 0 0 3
After successful completion of the course, student will be able to
CO1: Apply the Working Stress Method and Limit State Method design concepts
CO2: Analyze statically indeterminate beams and portal frames using plastic theory
CO3: Design the bolted and welded connections
CO4: Design the tension members as per IS code and concepts of shear lag
CO5: Design the compression members as per IS code
CO6: Design the laterally supported and unsupported beams as per IS code

CONCEPTS OF STRUCTURAL STEEL DESIGN

Working Stress Design - Limit State Design - Stress-strain relation of Mild steel - Modified stress-
strain diagram - Assumptions in Plastic theory - Collapse load - load factor - plastic bending -
Plastic hinge - Plastic moment of resistance - Plastic modulus - Shape factor - Plastic Analysis -
Kinematic theorem, Static theorem and Uniqueness theorem - Propped cantilevers - Fixed beams
and Continuous beams - Portal Frames. (9)

CONNECTIONS
Bolted and welded connections for axial forces- eccentric connections with bolt and weld. Beam to
beam connection - framed connection. Beam to column connection - Unstiffened seat connection -
stiffened seat connection - single and double stiffener angle. (9)

TENSION MEMBERS
Design of tension members subjected to axial tension- tension member subjected to bending - lug
angles. Design of Tension Splice - Concept of Shear lag (9)

COMPRESSION MEMBERS
Design of compression members with single rolled steel sections - Angle struts. Design of built-up
compression members - Design of lacings and battens - Eccentrically loaded column -column
splices - column bases for axial and eccentric loads. (9)

BEAMS
Design of laterally supported beam for flexure, shear, web crippling and buckling and deflection.
Built-up Beams - cross sections - beams with restrained and unrestrained compression flange. (9)

TOTAL:45 Hours

TEXT BOOKS
1. Subramanian.N, "Design of Steel Structures", Oxford University Press, New Delhi, 2016.
2. Duggal.S.K, "Limit State Design of Steel Structures", Tata McGraw Hill Publication, 2019.
3. Jayagopal.L.S & Tensing.D, "Design of Steel Structures", Vikas Publication House Ltd, Noida,
2015.
4. Gambir M.L., "Fundamentals of Structural Steel Design", Tata McGraw Hill Publication, New
Delhi, 2013

52
1.
REFERENCE BOOKS
1. Bhavikatti.S.S, "Design of Steel Structures by Limit State Design", I.K International Pvt. Ltd., New
Delhi 2011.
2. Ramachandra, Virendra Gehlot, "Limit State Design of Steel Structures", Scientific Publishers,
Jodhpur, 2017.
3. Shiyekar.M.R. "Limit State Design in Structural Steel", PHI learning Pvt. Ltd., Delhi, 2013.
4. IS 800 - 2007, "Code of Practice for use of Structural Steel in General Building Construction,”
Bureau of Indian Standards, New Delhi.
5. SP6 ISI Hand Book for "Structural Engineers and Application of Plastic Theory in Design of Steel
Strictures", 1972.

53
1.
 19CE63 - FOUNDATION ENGINEERING
L T P C
ASSESSMENT: THEORY
3 0 0 3
COURSE OUTCOMES:
On completion of the course, the students will be able to:
CO1: Select and conduct suitable site investigation for the proposed civil engineering project.
CO2: Estimate the bearing capacity of soil based on shear and settlement criteria.
CO3: Understand the concepts of settlement and proportioning of footings.
CO4: Determine the load carrying capacity and settlement of piles.
CO5: Understand the Earth pressure theories and analyze the stability of retaining wall.

SOIL INVESTIGATION AND CHOICE OF FOUNDATION

Methods of Soil Exploration - Boring - Sampling - Disturbed and undisturbed Sampling - Sampling
techniques - Bore log and soil investigation report - Function and requirements of good
foundation -Choice of foundation based on soil conditions. (9)

BEARING CAPACITY
Location and depth of foundations- Bearing capacity of shallow foundations on homogeneous
deposit - Terzaghi's Theory - IS Code method - Field tests - Factors influencing Bearing Capacity -
Methods of improving bearing capacity. (9)

SETTLEMENT AND PROPORTIONING OFSHALLOW FOUNDATIONS

Types of Isolated footing, Combined footing, Mat foundation- Settlement of foundations -
Components of settlement - Allowable and maximum differential settlement - Proportioning of
footing (No structural design) - Methods of minimizing settlement. (9)

PILE FOUNDATIONS
Need for deep foundations -Types of piles - classification of piles - Load carrying capacity of piles
in granular and cohesive soils -Static and Dynamic formulae - Pile carrying capacity by field tests -
Pile loadTest - Group Capacity - Settlement of Pile group - Negative skin friction. (9)

EARTH PRESSURE AND RETAINING WALLS

Earth pressure theory - Plastic equilibrium in soil - active and passive state - Rankine's theory -
Coulomb's wedge theory - Earth pressure on retaining walls of simple configurations - Stability of
retaining wall -Culmann's graphical method for determining earth pressure. (9)

Total: 45 Hours

54
1.
TEXT BOOKS:
1. Varghese P.C., "Foundation Engineering", Prentice Hall of India, 2012.
2. GopalRanjan and Rao A.S.R., "Basic and Applied Soil Mechanics", New age International (P) Ltd
Publications, New Delhi, Second Edition, 2010.

REFERENCE BOOKS:
1. Venkataramaiah.C, "Geotechnical Engineering", New Age International Ltd., New Delhi,2012.
2. Alam Singh., "Modern Geotechnical Engineering", IBS Publications, New Delhi, 2012.
3. Punmia.B.C., "Soil Mechanics and Foundation Engineering", Laxmi Publications, New Delhi,
Sixteenth Edition, 2012.
4. Braja M. Dass, "Principles of Foundation Engineering", Thomson Brooks Gole, Singapore, 2010.
ONLINE RESOURCES:
1. https://nptel.ac.in/courses/105/105/105105185/

55
1.
 19CEL64 - SOIL MECHANICS LABORATORY
L T P C
ASSESSMENT: PRACTICAL
0 0 2 1
COURSE OUTCOMES:
On completion of the course, the students will be able to:
CO1: Classify the soil based on index properties.
CO2: Estimate the density and consolidation parameters of soil.
CO3: Assess the soil parameters for design of foundation and subgrade.

LIST OF EXPERIMENTS

1. Grain Size analysis of soil

2. Determination of Specific Gravity
3. Atterberg limits (liquid, Plastic and Shrinkage limits)
4. Determination of coefficient of permeability
5. Determination of field density
6. Proctor Compaction Test
7. Consolidation Test
8. Direct Shear Test
9. Unconfined compression Test
10. Vane shear Test
11. CBR Test
12. Triaxial test (Demonstration only)
REFERENCE BOOKS:
1. "Soil Engineering Laboratory Instruction Manual", Published by the Department of Civil
Engineering. CIT, Coimbatore - 2016.
2. Head, K. H,"Manual of Soil Laboratory Testing (Vol-1 to 3)", John Wiley and Sons,
Chichester,1998.
3. Lambe T. W., "Soil Testing for Engineers", John Wiley & Sons, New York, 1990.
4. "I.S. Code of Practice 2720 (Part I to XLI) - Indian Standard Codeof Practice for Methods of
Tests for soil.
5. Saibaba Reddy, E. and Rama Sastri, K., "Measurement of Engineering Properties of Soils", New
Age International Publishers,New Delhi, 2002.
ONLINE RESOURCES:
1. https://nptel.ac.in/courses/105/101/105101160/
56
1.
 19CEL65 - QUANTITY SURVEYING AND PROJECT PLANNING LABORATORY

ASSESSMENT: PRACTICAL
L T P C
COURSE OUTCOME 0 0 2 1
At the end of this laboratory, the students will be able to

CO1 : List items of work and prepare specifications.

CO2 : Prepare the detailed estimate and abstract to arrive the quantity of items of work.
CO3 : Estimate the cost and quantity of materials and Resources for items of work.
CO4 : Evaluate the value of existing civil engineering structures and project planning tools.

ESTIMATING AND COSTING

Methods of Estimating and costing- Preparation of specifications-preparation of Detailed Estimate

using Excel- Datasheets Requirements of labour, non labour and materials for different types of
work- Abstract Estimate using Excel- Estimation of quantities and rate Abstract for Single storey
building, two storey building and other Civil Engineering structures.

PROJECT PLANNING USING PRIMAVERA AND MS PROJECT

Introduction to project planner and project management - defining Administrative categories- -

preparing activity areas and bar/Gantt chart areas- updating and tracking projects using base line-
producing reports -layout- filter - formatting, printing layout and reports.

TEXT BOOKS

1. DuttaB.N.,"Estimating and Costing in Civil Engineering", UBS Publishers and

Distributors(P)Ltd., NewDelhi, 2003.
2. RangwalaS.C.,"Elements of Estimating and Costing", Charotar Publishing House, Anand-
388001.
3. Dr.P.Vinayagam and Dr.A.Vimala," Planning and managing Projects with P6 Project Planner",
I.K. International Publishing House Pvt. Ltd., New Delhi, 2015.

REFERENCE BOOKS

1. Jagannathan,G., "Getting more at less cost- The value Engineering way", Tata McGraw Hill
Publishing Company, New Delhi, 2000.
2. Kohli,D.D and Kohli,R.C.," A Text Book of Estimating and Costing(Civil)", S.Chand &
CompanyLtd.,2004.

57
1.
 19CE71 - IRRIGATION ENGINEERING
ASSESSMENT: THEORY
L T P C
COURSE OUTCOME
3 0 0 3
At the end of this course, the students will be able to
CO1: Compute the demand and the available quantity of water required for irrigating a given crop
area
CO2: Determine the yield of a well
CO3: Produce hydraulic and geometrical design of storage and distribution systems to supply
water for a given area
CO4: Demonstrate suitable techniques for the construction and maintenance of a reservoir and a
canal network
CO5: Design, operate and maintain a canal
CO6: Plan and develop a procedure to implement an irrigation project given an agricultural
command area

WATER AND IRRIGATION

Irrigation - Necessity - Advantages - ill-effects - Types - Methods - Quality of water - Standards -
Crops - Seasons - Definitions related to agriculture and irrigation - Rotation of crops - Crop water
requirements - Base period - Duty - Delta - Consumptive use Irrigation Efficiencies - Assessment of
irrigation water - Water logging - Causes and effects - Remedies - Drainage – Necessity Advantages
- Types. (9)

HYDROLOGY
Surface hydrology - Precipitation - Types, forms, Measurement - Evaporation measurement -
Infiltration - measurement - Transpiration - Run-off - Hydrograph - Unit Hydrograph for single
peaked storm-S-curve technique- Flood Estimation. (9)

GROUND WATER
Occurrence of ground water - aquifer - aquiclude - confined, unconfined and perched aquifer -
Ground water yield - specific capacity of a well - measurement of yield of an open well by
pumping test and recuperation test – Typical cross sections of types of open and tube wells -
Elementary design of open and tube wells using direct discharge equation (without derivation of
formula). (9)

CANAL ENGINEERING
Canals -Classification - Distribution network - Cross sectional details - Sedimentation in canals -
Silt theories - Design of canals based on silt theories and use of charts - Balancing depth of cutting
- Design procedure for fixing longitudinal section - Canal losses - Canal maintenance – Canal
lining - types - Design of lined canals. (9)

RESERVOIR PLANNING
Dams - Brief idea about types of dam(detailed study not required) - Reservoir - Types,
Investigations for reservoir planning - Selection of site for reservoir - Zones of storage - Capacity -
Yield - Mass curve analysis - Capacity for specific demand and yield for given capacity - Fixing
reservoir capacity Economic height of a dam - Reservoir sedimentation and control (9)

TOTAL: 45hours
58
1.
TEXT BOOKS

1. Garg S.K, "Irrigation Engineering and Hydraulic Structures", Khanna Publishers, New Delhi,
2009.
2. Punmia B. C. and Pande B. B. Lal, "Irrigation and Water Power Engineering", Laxmi
Publications, New Delhi, 2009.

REFERENCE BOOKS

1. Micheal A.M., "Irrigation - Theory & Practice", Vikas publishing house, New Delhi, 2006.
2. Sharma R.K., "Irrigation Engineering & Hydraulic Structures", Oxford and IBH
Publishing Company, New Delhi, 2007

Online Resources

1. https://nptel.ac.in/courses/126/105/126105010/#

59
1.
 19CE72 - EARTHQUAKE RESISTANT DESIGN OF STRUCTURES

ASSESSMENT: THEORY L T P C
COURSE OUTCOME
At the end of this course, the student will be able to 3 0 0 3

CO1: Apply concepts of structural dynamics in determining response of free and forced vibration
for a given SDOF and MDOF structural systems.
CO2: Analyse the role of natural calamity in the damage of structures.
CO3: Design and detail the RC structural elements and shear wall for seismic resistance as per
Indian Standards.
CO4: Develop the skill to analyse and to apply in the practical problems.

STRUCTURAL DYNAMICS
Basic Concepts of vibration - Equation of motion- D'Alemberts Principle- Single Degree of Freedom
system – Idealization of structure as SDOF System - Free vibration - Forced vibration - Damping -
Measurement of damping by logarithmic decrement method-Simple problems on SDOF System-
Introduction to Multi Degree of Freedom system. (9)

ENGINEERING SEISMOLOGY
Elements of Engineering seismology - Reid's Elastic rebound theory- Plate tectonics - Seismic
waves –Behavior of RCC, steel and prestressed concrete structures under earthquake loading –
Pinching Effect – Bouchinger Effect – Lessons learnt from past earthquakes - Seismograph and
Accelerograph - Seismic Zoning map of India. (9)

SEISMIC ANALYSIS
Response Spectrum - Modal response contribution – Modal participation factor. Calculation of base
shear as per IS 1893-2016 and IS 4326 provisions - Static and Dynamic method - Equivalent Static
Lateral force method and Response spectrum method. (9)

EARTHQUAKE RESISTANT DESIGN

Design of Beams, Columns - Shear wall - Types of Shear wall - Design of Rectangular Shear wall
with boundary elements (IS 13920 -2016) – Introduction to coupled shear wall system. (9)

IS CODE PROVISIONS
Ductility - Assessment of Ductility - Member / Element Ductility - Structural Ductility - Factors
affecting Ductility- Ductile detailing of beams, column, joint and footings and special confining
reinforcements as per IS 13920 - 2016. Behaviour of Masonry Structures as per IS 13827 and
IS13828. Modern Concepts - Base isolation – Soil structure interaction. (9)

TOTAL: 45Hours
TEXT BOOKS
1. Pankaj Agarwal and Manish Shrikhande, “Earthquake Resistant Design of structures,” PHI
Learning Pvt. Ltd., New Delhi, 2009
2. Duggal.S.K., "Earthquake Resistant of Structures", Oxford University Press, New Delhi,2007.
3. Anil K. Chopra, “Dynamics of Structures - Theory and Applications to Earthquake
Engineering”, Prentice Hall of India Pvt. Ltd., New Delhi, 2007.

60
1.
REFERENCE BOOKS

1. Amr S. Elnashai and Luigi Di Sarno, “Fundamentals of Earthquake Engineering”, John Wiley
& Sons, Ltd., 2008.
2. Clough,R.W. and Penzien,J., “Dynamics of Structures”, McGraw-Hill, Inc, 1995.
3. Pauley and Priestly, “Seismic Design of Reinforced Concrete and Masonry Buildings”, John
Wiley & Sons, 1992.
4. Moorthy C V R, “Earthquake Tips”, NICEE, IIT Kanpur 2002.
5. IS 1893: 2016 Part I Criteria for earthquake resistant design of structures.
6. IS 1893: 2016 Part II Criteria for earthquake resistant design of structures: Liquid retaining
tanks
7. IS 4326: 1993 Code of practice for earthquake resistant design and construction of
buildings.
8. IS 13920 - 2016, Indian Standard Code of Practice for Ductile Detailing of RC Structures,
Bureau of Indian Standards, New Delhi.

ONLINE RESOURCES
1. https://onlinecourses.nptel.ac.in/noc19_ce27/course

61
1.
 19CE73 – CONSTRUCTION MANAGEMENT
L T P C
ASSESSMENT: THEORY
COURSE OUTCOME 3 0 0 3
After successful completion of the course, students will be able to
CO1: Describe construction management functions, various organization
structures and duties of various construction team.
CO2: Employ the procedure for contractor’s selection through tendering process.
CO3: Develop a realistic schedule for the optimum use of resources in construction projects.
CO4: Formulate construction resource planning and achieve project targets with managerial skills.
CO5: Plan, control and monitor construction projects with respect to time and cost.

CONSTRUCTION PROJECT AND ORGANISATION MANAGEMENT

Basics of Construction - Unique features of construction - Construction projects- Types and

features, Phases of a project - Construction Project management - Importance, Functions & Scope -
Project Organization - Forms of business organization - Structure of construction organization -
Management levels - Construction team- Roles, Responsibilities and Skills of construction team -
Factors behind the success of a construction organization. (9)

TENDERING AND CONTRACTING

Tender - Types, Terms and Conditions, issue procedure, opening, Scrutiny, Acceptance, Rejecting -
Prepare Tender Notice - Technical terms - Administrative approval, Technical Sanction, Issue rate,
Competent Authority, Secured Advance, Mobilization Advance, Earnest money deposit (EMD) and
Security deposit (SD) – Contract - Introduction, Requirement, Types - Contract documents and
Conditions of Contract -Contract agreement - Prequalification of Contract - Importance – Methods
of getting work done in government organization through contracts - Measurement book, Muster
roll, types of bills and recording - Cash book -Work register - imprest account.
(9)
CONSTRUCTION PLANNING, SCHEDULING AND TIME MANAGEMENT
Construction project planning - Stages of project planning: Pre-tender planning, Preconstruction
planning, Detailed construction planning - Process of development of plans and schedules - work
break-down structure- activity lists - assessment of work content, concept of productivities,
estimating durations, sequence of activities, activity utility data- Techniques of planning- Bar
charts, Gantt Charts - Networks: basic terminology, types of precedence relationships, preparation
of CPM networks - activity on link and activity on node representation, computation of float values,
critical and semi critical paths, calendaring networks - PERT- Assumptions underlying PERT
analysis, determining three time estimates, analysis, slack computations, calculation of probability
of completion. (9)

CONSTRUCTION RESOURCE MANAGEMENT

Planning and organizing construction site and resources - Site layout including enabling structures,
developing site organization, Documentation at site - Manpower: planning, organizing, staffing,
motivation - Materials: concepts of planning, procurement and inventory control - Equipment:
basic concepts of planning and organizing - Funds: cash flow, sources of funds - Histograms and S-
Curves - Earned Value - Resource Scheduling-resource aggregation, allocation, smoothening and
leveling. (9)
62
1.
PROJECT MONITORING AND CONTROL
Project Monitoring & Control - Supervision, record keeping, periodic progress reports, periodical
progress meetings - Updating of plans: purpose, frequency and methods of updating - Common
causes of time and cost overruns and corrective measures - Basics of Modern Project management
systems such as Lean Construction - Use of Building Information Modelling (BIM) in project
management - Quality control: concept of quality, quality of constructed structure, use of manuals
and checklists for quality control, role of inspection, basics of statistical quality control. (9)

TOTAL: 45Hours

TEXT BOOKS
1. Dr.M.R.Sharma, "Fundamentals of construction planning and management", Kataria and Sons,
New Delhi, 2015.
2. Seetharaman S., "Construction Engineering and Management", Umesh publications, New Delhi,
1997
3. Chris Hendrickson, "Project Management for Construction", Prentice Hall, 2000.

REFERENCE BOOKS
1. Kumar NeerajJha, "Construction Project Management", Pearsons Education India, 2011.
2. Memoria, C.B., and S.V.Kankar, "Personnel Management", Himalaya publishing co, 1997.
3. Harpal Singh, "Construction Management and Accounts", Tata McGraw Hill, New Delhi, 1981.

ONLINE RESOURCES
1. https://nptel.ac.in/courses/105/104/105104161/
2. https://nptel.ac.in/courses/105/106/105106149/

63
1.
 19CEL74 - COMPUTER APPLICATIONS LABORATORY

ASSESSMENT: PRACTICAL
L T P C
COURSE OUTCOME
At the end of this laboratory, the student will be able to 0 0 2 1

CO1 : Modeling, Analysis and Design of frames and trusses using STAAD Pro
CO2 : Modeling, Analysis and Design of Bridge decks for moving loads using STAAD Pro
CO3 : Modeling, Analysis and Design of circular and rectangular water tanks using STAAD Pro
CO4 : Design of slab, beams, columns & Footings using EXCEL

ANALYSIS AND DESIGN PACKAGES

Introduction to STAAD Pro - Need for computer analysis - Analysis of basic structural elements
like simply supported beams, cantilever beams, propped cantilever beams, continuous beams,
sinking of supports and fixed beams. Analysis and design of 2D and 3D frames.

Analysis and design of 2D and 3D trusses - Analysis and design of space frame subjected to wind
load and seismic load - Analysis, design and modelling of 2D frames and bridge deck with moving
load-Analysis and design of rectangular and circular- ground level, underground and elevated
water tank with and without bracings.

Design of structural elements like slab, beams, columns and footings Using Excel.

REFERENCE BOOKS

1. STAAD Pro - Manual, volume 1 and 2, Bentley Systems India private limited, New Delhi.
2. Dr.P.Vinayagam, "Analysis and Design of Structures using STAAD Pro ", Vaghai
Publishers, Coimbatore, 2011

64
1.
 19CEL75 - CONCRETE LABORATORY

ASSESSMENT: PRACTICAL L T P C
COURSE OUTCOME
On completion of the course the students will be able to 0 0 2 1

CO1: Identify Quality Control tests on cement, mortar and concrete as per Indian
Standard
CO2: Design a concrete mix and evaluate the strength of the concrete as per Indian Standard
CO3: Evaluate the fresh properties of concrete by performing workability tests
CO4: Evaluate the hardened properties of concrete under tension, compression and transverse
loading.
CO5: Assess the strength of existing concrete structures by performing NDT tests.

LIST OF EXPERIMENTS
I. Study of Equipment & Mix Design
1. Study of Concrete Mixer, Needle Vibrator, Table vibrator, Moulds, Proving ring, Jacks &
Dial gauges
2. Concrete Mix Design as per IS: 10262 - 2019
II. Tests on Cement& Cement Mortar
3. Normal Consistency and Setting Time of Cement
4. Soundness Test on Cement
5. Compressive Strength Test for Cement
6. Flow Test on Mortar
7. Setting Time of Cement Mortar
III. Tests on Fresh Concrete
8. Slump Test
9. Compacting Factor Test
10. Vee - Bee Consistometer test
11. Kelly Ball Test
IV. Tests on Hardened Concrete
12. Compressive Strength of Concrete on Cube and Cylinder
13. Split Tensile Strength of Concrete on Cylinder
14. Modulus of Rupture of concrete
V. Non - Destructive Testing
15. Ultrasonic Pulse Velocity Test
16. Rebound Hammer Test
17. Windsor Pin System
18. Demo of Core Cutting Machine

TEXT BOOKS
1. A. M. Neville, “Properties of Concrete” by Pearson 5th edition Education ltd 2016.
2. M. S. Shetty, “Concrete Technology” by S. Chand & Co.2008

65
1.
REFERENCE BOOKS
1. Santhakumar A.R., "Concrete Technology" by Oxford University Press, New Delhi, 2012
2. Krishnasamy K.T., "Concrete Technology" by Dhanpat Rai, New Delhi, 2012.
3. Gambhir M.L., "Concrete Technology" Tata McGraw Hill Publishing Company Limited, New
Delhi, 2009.
4. Job Thomas, “Concrete Technology” by Cengage learning India Pvt Ltd 2015.
5. Indian Standards (IS 456-2000, IS 269-1989, IS 516-1959, IS 1786-1985, IS 1893-2002, IS
12269-1987, IS 9103-1999, IS 8112-1989)

ONLINE RESOURCES
1. http://www.nptel.iitm.ac.in
2. https://freevideolectures.com/course/3357/concrete-technology
3. https://nptel.ac.in/content/storage2/nptel_data3/html/mhrd/ict/

66
1.
 19CEE01- DESIGN OF CONCRETE STRUCTURES
ASSESSMENT: THEORY
COURSE OUTCOMES: L T P C
At the end of this course, the students will be able to
CO1 : Understand the concepts of yield line theory. 3 0 0 3
CO2 : Design retaining walls.
CO3 : Analyse Building frames for gravity and wind loads
CO4 : Design water tanks using working stress method
CO5 : Design bridges

YIELD LINE THEORY

Introduction to yield line theory of slabs - Application to square and rectangular slabs with simply
supported or fixed boundary conditions subjected to uniformly distributed loads (by upper bound
theorem) (9)

RETAINING WALLS
Design of cantilever and counterfort retaining walls for level surface filled with/without uniform
surcharge - stability requirements - Description of inclined backfill (no problems) (9)

BUILDING FRAMES
Difference between multi-storeyed load bearing and framed structures-Elastic analysis using
substitute frames for gravity loadings approximate analysis of single and two bay frames up to 3
storeys for lateral loads using portal and cantilever methods. (9)

GROUND AND UNDER GROUND WATER TANK

Classifications- IS code provision - Design of ground level square, rectangular and circular tanks -
Design of underground rectangular tank. (9)

OVERHEAD WATER TANK AND BRIDGES

Design of overhead rectangular (with problems). Design of staging for rectangular tank.
Introduction to circular and Intz type tanks. Types of bridges - IRC loadings - Design of single span
slab bridges for class A loadings only (Restricted to two lane) (9)

TOTAL: 45 HOURS

TEXT BOOKS
1. Unnikrishna Pillai and Devados Menon, "Reinforced Concrete Design", Tata Mc Graw Hill
Publishing Co, New Delhi, 2011.
2. Krishna Raju N., "Advanced Reinforced Concrete Design", CBS Publishers and Distributors, Delhi,
2003.
3. Jain, O.P and Jaikrishna "Plain and Reinforced Concrete Vol.I and Vol.II", Nemchand and Brothers,
Roorkee, 2007.
4. Vazirani V.N. and Ratwani, N.M.,"Concrete Structures", Khanna Publishers, New Delhi, 2004.

67
1.
REFERENCE BOOKS
1. Reynolds C.E., "Reinforced Concrete Designer's Hand Book", Cement and Concrete Association,
London, 2002.
2. Johnson Victor D., "'Essentials of Bridge Engineering", Oxford and IBH Publishing Company, New
Delhi, 2003.
3. Krishna Raju N., "Advanced Reinforced Concrete Design", CBS Publishers and Distributors, Delhi,
2003.
4. Syal I.C. and Goel A.K., "Reinforced Concrete Structures", Wheeler and Company, Private Limited,
New Delhi, 1998.
5. Ashok K Jain, "Reinforced Concrete Limit State Design", New Chand Brothers, Roorkee, 2012.
6. IS 456 - 2000 Code of Practice for Plain and Reinforced Concrete, Bureau of Indian Standards,
New Delhi.
7. IS 3370 (Part I) - 1965 (Reestablished: 1999) - Code of Practice for Concrete Structures for the
Storage of Liquids, Bureau of Indian Standards, New Delhi.
8. IS 3370 (Part II) - 1965 (Reestablished: 1999) - Code of practice for Concrete Structures for the
Storage of Liquids, Bureau of Indian Standards, New Delhi.
9. IS 3370 (Part III) - 1965 (Reestablished: 1999) - Code of practice for Concrete Structures for the
Storage of Liquids, Bureau of Indian Standards, New Delhi.
10. IRC:5 - 1998 - Standard Specification and Code of Practice for Road Bridges (Section I), Bureau
of Indian Standards, New Delhi.
11. IRC:6 - 1966 - Standard Specification and Code of Practice for Road Bridges (Section II), Bureau
of Indian Standards, New Delhi.
12. IRC:21 - 2000 - Standard Specification and Code of Practice for Road Bridges (Section III),
Bureau of Indian Standards, New Delhi.
13. Design aids for Reinforced Concrete to IS : 456 - 1978, Bureau of Indian Standards, New Delhi.

68
1.
 19CEE02- ADVANCED CONCRETE STRUCTURES
ASSESSMENT: THEORY
COURSE OUTCOME L T P C
On successful completion of this course, the student will be able to
3 0 0 3
CO1: Design the long column and deep beams
CO2: Design the grid slab and flat slab as per code requirements
CO3: Design the chimney as per IS code and bunker and silo.
CO4: Understand limit analysis and serviceability

DESIGN OF LONG COLUMNS AND DEEP BEAMS

Design of long column subjected to biaxial bending moment and axial load SP 16. Behavior of deep
beams - Designs as per IS 456 - 2000. (9)

CHECK FOR SERVICEABILITY

Limit State of Serviceability - calculation of deflection and cracking - Check for deflection and
cracking as per IS 456 - 2000. (9)

DESIGN OF FLAT SLAB AND GRID FLOOR

Grid and coffered floors, general features, rigorous and approximate method of analysis and design
of grid floor - Design of flat slab with and without drop, column and middle strip, proportioning of
flat slab element as per IS 456-2000 (9)

LIMIT ANALYSIS
Limit Analysis of RCC structures - Fundamental principles, concept of moment redistribution -
moment rotation characteristics permissible rotation capacity - Cambridge method - A.L.L. Baker's
method of Limit analysis. (9)

TALL STRUCTURES
Analysis of R.C. Chimneys by Elastic theory - Design by LSD. Design of square bunker using
Rankine's theory. Design of circular Silo using Jansen's theory and Airy's theory (Derivation not
required for both theories). (9)

TOTAL: 45Hours

TEXT BOOKS
1. Ashok K.Jain., "Reinforced concrete - Limit State Design", Nem Chand Brothers, Roorkee,
2006.
2. Krishnaraju N., "Advanced Reinforced Concrete Design", C.B.S Publishers and Distributors,
New Delhi, 2013.

REFERENCE BOOKS
1. Jain and Jai Krishna., "'Plain and Reinforced Concrete", Nem Chand Brothers, Roorkee, 2007.
2. Mallick and Gupta., "Reinforced Concrete Design", Oxford and IBH, Publishers, Delhi, 1996.
3. IS456 - 2000, Code of "Practice for Plain and Reinforced Concrete" Bureau of Indian
Standards, New Delhi.
4. IS 4995-1978 (Part 1), Criteria for design of reinforced concrete bins for the storage of
Granular and Powdery materials, Bureau of Indian Standards, New Delhi.
69
1.
 19CEE03- PRESTRESSED CONCRETE STRUCTURES
ASSESSMENT: THEORY
COURSE OUTCOME L T P C
At the end of this course, the student will be able to
CO1: Determine the losses in prestressed concrete members. 3 0 0 3
CO2: Design the prestressed concrete beams for flexure and shear using Limit State
method of design.
CO3: Design the end blocks, tension and compression members.
CO4: Design the composite prestressed concrete beams and shear connectors.
CO5: Analyze the continuous prestressed concrete beams

CONCEPTS OF PRESTRESSING AND LOSSES

Basic concepts, Advantage, Principles of prestressing, Material required-Methods and systems of
prestressing - Classification of prestressed concrete structures-Materials-High strength concrete
and High strength steel, Losses in prestress, Losses in pretensioned and post tensioned beams.
Loss due to elastic shortening, creep, shrinkage, relaxation, friction – Approximate percentage of
various losses in pretensioned and post tensioned beams. (9)

DESIGN OF FLEXURE MEMBERS

Theory and behaviour of prestressed concrete members in bending - Design of prismatic
prestressed concrete members for bending for working loads by Magnel's graphical method -
Check for ultimate load stage (Limit State Design), calculation of deflections, Design of beams for
shear in working and ultimate loads (9)

END BLOCK DESIGN, TENSION AND COMPRESSION MEMBERS

Design of Anchorage Zone by Guyon's method (simple problems)-Concept of Magnel's method,
IS1343 recommendations. Design of tension and compression members-Columns subjected to
bending moment and axial compression. (9)

COMPOSITE BEAMS
Composite prestressed concrete beams- Design procedure-Calculation of stresses at important
stages both for propped and unpropped constructions-Design of shear connectors- Differential
Shrinkage stresses. (9)

STATICALLY INDETERMINATE STRUCTURES

Statically indeterminate structures- continuous beams-Concept of concordant cable and linear
transformations- Sketching of pressure lines (simple problems). Partial and circular prestressing
(Principles only), prestressed concrete water tank-concept (no problem). (9)

TOTAL:45 HOURS

TEXT BOOKS
1. Krishna Raju, N. "Prestressed Concrete", Tata McGraw Hill, New Delhi,2012.
2. Rajagopalan.N, "Prestressed Concrete", Alpha Science International Ltd., UK, 2005.
3. IS 1343:2012 - Code of Practice for Prestressed Concrete, Bureaus of Indian Standards, New
Delhi.

70
1.
REFERENCE BOOKS
1. Lin T.Y. & Burns N., "Design of Prestressed Concrete Structures". John Wiley & Sons,1992.
2. Dayaratham N, "Prestressed Concrete Structures". Oxford & IBH Company, New Delhi, 2014.
3. Rajagopalan, "Prestressed Concrete", Narosa Publishers, New Delhi, 2013.
4. Edward G Nawy ,"Prestressed Concrete", A Fundamental Approach, 3rd Edition, Prentice Hall,
Upper Saddle river, NewJersy, 2000
5. Mallik S.K. and Gupta A.P. ,"Prestressed Concrete", Oxford & IBH Publishing Co., Pvt. Ltd.,
India, 2nd Edition, 1986.

71
1.
 19CEE04- DESIGN OF BRIDGES

ASSESSMENT: THEORY
L T P C
COURSE OUTCOMES:
After successful completion of the course, student will be able to 3 0 0 3
CO1: Analyze various types of bridges and bridge components
CO2: Design of tee beam and deck slab bridges by Courbon's theory and Pigeaud's curves
CO3: Design of components in Prestressed concrete bridges
CO4: Design of stringers, cross girders and main girders of through type and deck type steel
bridges
CO5: Design of Steel and RC bearings of bridges

REINFORCED CONCRETE DECK SLAB BRIDGES

Introduction - Classification of Bridges - Types of IRC loadings - Design of solid deck slab bridges
for IRC loading -Concept of design of skew slab bridges (9)

REINFORCED CONCRETE TEE BEAM AND DECK SLAB BRIDGES

Design of tee beam and deck slab bridges- Courbon's theory - Pigeaud's curves -Concept of
balanced cantilever and continuous bridges. (9)

PRESTRESSED CONCRETE BRIDGES

Design of prestressed concrete bridges -Design of girder section -Maximum and minimum
prestressing forces -Eccentricity -Check for stresses at various sections -Design of End block. (9)

STEEL BRIDGES
Design of through type and deck type steel highway bridges for IRC loading - Design of stringers,
cross girders and main girders (9)

BRIDGE BEARINGS
Types of bearings - Design of steel roller and rocker bearings - Design of RC rocker bearing - Design
of elastomeric pad bearing (9)

TOTAL: 45 HOURS

TEXT BOOKS
1. Krishna Raju, N., "Design of Bridges", Oxford & IBH Publishing Co. Pvt. Ltd., 2018.
2. Johnson Victor, D, "Essentials of Bridge Engineering", Oxford and IBH Publishing Co., 2019.

REFERENCE BOOKS
1. Ponnuswamy S., "Bridge Engineering", Tata McGraw-Hill, 2019.
2. Raina.V.K, “Concrete Bridge Practice”, Tata McGraw Hill, 2007
3. IRC 5:1998 Standard Specifications and code of practice for Road Bridges, Section I - General.
4. IRC 6:2014 Standard Specifications and code of practice for Road Bridges, Section I - Loadings.
5. IRC 83:2015 Standard Specifications and code of practice for Road Bridges, Bearings.
6. IRC 112:2011.Code of practice for concrete road bridges.
72
1.
 19CEE05 - ADVANCED STEEL STRUCTURES

ASSESSMENT: THEORY L T P C

COURSE OUTCOME 3 0 0 3
After successful completion of the course, student will be able to
CO1 : Ascertain the element to find the load carrying capacity for stiffened and unstiffened
member for a given section.
CO2 : Examine the necessary connections for structural steel members
CO3 : Determine the forces accompanied with Transmission line and Micro Wave towers.
CO4 : Design and develop structural members associated with industrial buildings.
CO5 : Diagnose the forces acting on bunkers and silos in their structural design.

LIGHT GAUGE STEEL MEMBERS

Light gauge sections - types of sections, material - local buckling of thin elements - stiffened and
multiple stiffened compression members - Unstiffened elements - Laterally supported and
unsupported flexural members - connections. (9)
CONNECTIONS
Connections - flexible, semi-rigid and rigid or moment resisting connections. Multistoreyed
framed structures - Analysis for Vertical and lateral loads for frames with moment resistant
connections only - Design for composite construction. (9)
STEEL TOWERS
Transmission line towers - Micro Wave Towers - Loads on Towers - Shape, Sag and Tension in
Uniformly loaded conductors - Analysis of towers - Design of member in towers - Design of
tower foundations (9)
INDUSTRIAL BUILDINGS
Requirements of Industrial Structures - Design of Gantry Girder. Industrial Building frames -
General, framing, bracing, Crane Girders and columns - Welded Plate Girder - Elements of Plate
Girder - Deign - Curtailment of Flange - Stiffeners and Splices-Analysis and Design of Single Bay
Gable Frame with Knee Bent. (9)

BUNKERS AND SILOS

Pressure on side walls of bunkers and silos - Jansen's and Airy's theories - complete design of
circular silos (9)
TOTAL: 45 Hours

TEXT BOOKS
1. Subramanian.N, "Design of Steel Structures", Oxford University Press, New Delhi, 2013.
2. Duggal.S.K, "Limit State Design of Steel Structures", Tata McGraw Hill Publication, 2011.
3. Jayagopal.L.S & Tensing.D. "Design of Steel Structures", Vikas Publications House Ltd, Noida.

73
1.
REFERENCE BOOKS
1. Bhavikatti.S.S, "Design of Steel Structures by Limit State Design", I.K International Pvt. Ltd.,
New Delhi 2011.
2. Ramachandra, Virendra Gehlot, "Limit State Design of Steel Structures", Scientific Publishers.
Jodhpur, 2010.
3. Shiyekar.M.R. "Limit State Design in Structural Steel", PHI learning Pvt. Ltd., Delhi, 2013.
4. IS 800 - 2007, "Code of Practice for use of Structural Steel in General Building Construction,
Bureau of Indian Standards, New Delhi.
5. SP6 : Part 1 : 1964, Handbook for Structural Engineers - Structural Steel Sections
6. Ramchandra, "Design of Steel Structures" - Vol. I and II, Standard Publishers Distributers,
New Delhi, 2002.
7. Bresler and Lin, "Design of Steel Structures", Wiley Eastern Pvt. Ltd., New Delhi. 1980.
8. Vazirani, V.N. and Ratwani, N.M., Honey Mehra "Design and Analysis of Steel Structures",
Khanna Publishers, New Delhi, 2000.
9. IS 801: 1975, “Code of Practice for use of cold formed light gauge steel structural members in
general construction,” Bureau of Indian Standards, New Delhi.
10. IS 802: Part 1 Section - 1, “Code for Practice for use of Structural Steel in Overhead
Transmission line Towers, Materials and Loads and Permissible Stresses,” Bureau of Indian
Standards, New Delhi, 1995.
11. IS 6533-2 (1989), “Code of Practice for Design and Construction of Steel Chimney,” Bureau of
Indian Standards, New Delhi, 1989.

74
1.
 19CEE06- ADVANCED STRUCTURAL ANALYSIS
ASSESSMENT: THEORY
L T P C
COURSE OUTCOME
At the end of this course, the students will be able to 3 0 0 3
CO1 :Outline basic concepts and compute static and kinematic indeterminacy of
structures
CO2 :Apply energy concepts and the laws underlying the mechanics of structures in the
mathematical framework of matrices.
CO3 : Formulate stiffness matrix by direct stiffness method and elemental approach and apply to
analyse indeterminate beams, frames and trusses.
CO4 :Formulate flexibility matrix by elemental approach and apply to analyse indeterminate
beams, frames and trusses.
CO5 :Identify and define the basic concepts, shape functions and methods of discretization in
finite element method
BASIC CONCEPTS
Indeterminacy - Static, Kinematic - Generalized measurements - Degrees of Freedom - Constrained
measurements - Behavior of Structures - Principle of Superposition - Equilibrium, Compatibility
and Force displacement relations (9)

ENERGY CONCEPTS
Strain energy; stiffness and flexibility matrices for strain energy - Betti's law and its applications -
Properties of stiffness and flexibility matrices - Contra gradient law- Co-ordinate transformations -
Transformation of element matrices to structure matrices - orthogonal transformations. (9)

MATRIX STIFFNESS METHOD

Transformation of element stiffness matrices from local to global co-ordinates – Application of
direct stiffness method to two span continuous beams and pin-jointed plane frames (frames of
maximum three members) - Advantages of direct stiffness method.
Element stiffness matrices for truss, beam and plane frame elements - Development of structure
stiffness matrix by element approach Analysis of statically indeterminate beams, rigid jointed and
pin-jointed plane frames by matrix stiffness approach. (9)

MATRIX FLEXIBILITY METHOD

Element flexibility matrices for truss, beam and plane frame elements - Development of structure
flexibility matrix by element approach –Analysis of statically indeterminate beams, rigid jointed
and pin-jointed plane frames by flexibility matrix approach. Comparison of flexibility matrix and
stiffness matrix methods. (9)

FINITE ELEMENT METHOD

Introduction to finite element analysis – Concept of discretization of continuum - Finite element
analysis procedure – Relevant basics of elasticity – Stress-strain relation (Constitutive relation) -
Strain-displacement relation – Concept of strain-displacement matrix – Types of 1-D, 2-D and 3-D
finite elements –Displacement function – Convergence and compatibility requirements -
Development of shape functions for truss element (2-noded and 3-noded), beam element and CST
element (9)

TOTAL: 45Hours
75
1.
TEXT BOOKS

1. Pandit G. S. and Gupta S. P., Structural Analysis – A Matrix Approach, Tata McGraw Hill, New
Delhi, 2008.
2. Rajasekharan S. and G. Sankarasubramanian, Computational Structural Mechanics, Prentice
Hall of India, New Delhi, 2012.
3. Krishnamoorthy C. S., Finite Element Analysis – Theory and programming, Tata McGraw Hill,
New Delhi, 2008.

REFERENCES

1. Hibbeler R. C., Structural Analysis, Pearson Education, New Delhi, 9th ed.,2017.
2. Ghali A., Neville A. M. And Brown T. G., Structural Analysis – A Unified Classical and Matrix
Approach, Spoon Press, London and New York, 2017.
3. Manicka Selvam V.K., Elements of Matrix and Stability Analysis of Structures, Khanna
Publishers, Delhi, 2010.
4. Robert D. Cook, David S. Malkus, Concepts and Applications of Finite Element Analysis, John
Wiley & Sons, Indian Edition, 2007.
5. William Weaver Jr. and James M. Gere, Matrix Analysis of Framed Structures, CBS Publishers,
New Delhi, 2004.
6. Rajasekharan S., Finite Element Analysis in Engineering Design, S.Chand and Company Ltd.,
2003.

ONLINE RESOURCE

https://nptel.ac.in/courses/105/106/105106050/

76
1.
 19CEE07- PREFABRICATED STRUCTURES

ASSESSMENT: THEORY L T P C
COURSE OUTCOME
3 0 0 3
At the end of this course the students will be able to
CO1: Apply the principles of prefabrication towards economy, standardization, systems of
prefabrication and its elements
CO2: Employ standard practices and techniques in precast concrete manufacturing and handling of
elements
CO3: Apply the design principles involved in precast concrete structures
CO4: Choose joints and connections involved in prefabricated concrete structures
CO5: Apply the design principles of prefabricated structures subjected to abnormal loads

PRINCIPLES OF PREFABRICATION
Types of prefabrication - Advantages and disadvantages of prefabrication-Economy of
prefabrication - Modular coordination - Standardisation - Prefabrication system and structural
schemes - Prefabricated elements - Beams - Columns - Slabs-Roof and floor panels - Wall panels -
Staircase. (9)

PRECAST CONCRETE-MANUFACTURING AND ERECTION TECHNIQUES

Standard practices and techniques of precast concrete manufacturing and handling -Cycle of
precasting - Reinforcement- Preparation of moulds -Preparation and transportation of concrete-
Production tolerances -Transportation and erection of prefabricated elements-Equipments for
handling precast elements. (9)

DESIGN PRINCIPLES
Disuniting of structures-Structural behaviour of precast structures - Handling and erection
stresses -Design of cross section based on efficiency of material used- Problems in design because
of joint flexibility-Allowance for joint deformation. (9)

JOINTS AND CONNECTIONS

Types of precast element connections - Column to foundation connections -Column to column
connections-Beam to column connections-Beam to beam connections-Floor to beam connections-
Wall to wall connections- Joints for different structural connections - Dimensioning and detailing of
joints for different structural connections - Construction and expansion joints in precast
construction. (9)

DESIGN PRINCIPLES FOR ABNORMAL LOADS

Code provisions- Equivalent design loads for considering abnormal effects such as earthquakes,
cyclones - Progressive collapse -Importance of avoidance of progressive collapse. (9)

TOTAL: 45Hours

TEXT BOOKS:
1. Haas A.M., “Precast Concrete- Design and Applications” Applied Science Publishers, London and
NewYork, 1995.
2. Promyslov, V., “Design and Erection of Reinforced concrete structures”, MIR Publishers, Moscow,
1998.
77
1.
REFERENCE BOOKS:
1. Levit M., “Precast concrete materials, Manufacture properties and usage”, Applied Science
Publishers, London, 2000.
2. Glover C.W., “Structural Precast Concrete” Asia Publishing House, Bombay. 1967.
3. IS 15916-2010: “Indian Standard Code of Practice for Building Design and erection using
Prefabricated Concrete”, Bureau of Indian Standards, New Delhi.
4. Structural Design Manual, “Precast concrete Connection Details”, Society for the Studies in the
use of Precast Concrete, Netherland Behor Verlag, 2009.
5. Koncz T., “Manual of Precast Concrete Construction”, Vol.I, II and III, Bauverlag, GMBH, 1976.

ONLINE RESOURCES
1. https://nptel.ac.in/courses/105105108/
2. https://nptel.ac.in/courses/112106141/

78
1.
 19CEE08 - ADVANCED SURVEYING

ASSESSMENT : THEORY L T P C
COURSE OUTCOME 3 0 0 3
At the end of this course, the student will be able to
CO1 : Determine the distance, angles, area by tacheometry and Geodetic Survey
CO2 : Identify the errors in measurements and determine most probable values of given quantities
CO3 : Determine true meridian, latitude, longitude and time corrections using astronomical survey
CO4 : Interpret the aerial photographs to find ground co-ordinates
CO5 : Prepare topographical area map of given larger field using Electronic total station and
scanner
CO6 : Create map through interpretation techniques using Remote Sensing, GPS and GIS
TACHOMETRIC SURVEYING AND THEORY OF ERRORS
Introduction, purpose, principle, instruments, stadia constants, methods of tacheometry, anallatic
lens, reduction of readings- Problems.
Introduction, types of errors, definitions, laws of accidental errors, laws of weights, theory of least
squares, rules for giving weights and distribution of errors to the field observations, determination
of the most probable values of quantities - Problems.
(9)
FIELD ASTRONOMY
Introduction, purposes, astronomical terms, determination of azimuth, latitude, longitude and time
corrections to the observations.- Problems.
(9)

AERIAL PHOTOGRAMMETRY AND MODERN SURVEYING INSTRUMENTS

Introduction, Principle, Uses, Aerial camera, Aerial photographs, Definitions, Scale of vertical and
tilted photograph, Ground Co-ordinates, Displacements and errors, Ground control, Procedure of
aerial survey, Photomaps and mosaics, Stereoscopes, Parallax bar.

Electromagnetic spectrum, Digital self-leveling levels, Scanners for Topographical survey,Drones

surveying – introduction, mission and mapping, Applications of DGPS (Differential Global
Positioning Systems) and Ground Penetrating Radar (GPR).
(9)

CONSTRUCTION SURVEYING
Marking a control station(Establishing a point) - Marking Building Corner-Marking a line-Marking
grades-Slopes Stakes- Setting out of works for large structures-Vertical controls-Setting out a
Building
Setting out of grades of Sewer, Pipelines, Roads and Railways-Setting out slopes in embankments
and cutting- Setting out of culverts and bridges-Use of laser beams in Setting works- Setting out of
tunnels
(9)
79
1.
HYDROGRAPHIC SURVEYING
Horizontal and vertical control- Shoreline Survey-Tides and Mean sea level- Tide gauges- Sounding
–simple problems, Eqipment for sounding- Sounding Party- Making Sounding- Locating Sounding-
Plotting of Sounding.
(9)
TOTAL : 45 Hours

TEXT BOOKS
1. Agor R., "Advanced Surveying", Khanna Publishers, New Delhi, 2018.

REFERENCE BOOKS
1. Dr. B.C. Punmia, "Surveying, Vol. I, II and III", Laxmi Publishers, New Delhi, 2016
2. Kanetkar T.P. and Kulkarni S.V., "Surveying and Levelling, Vol. I and II", VidhyarthiGruh, Pune,
2016
3. Dr. K.R. Arora, "Surveying, Vol. I, II and III", Standard Book House, New Delhi, 2019
4. Duggal S. K., "Surveying, Vol. I and II", Tata Mcgraw Hill, New Delhi, 2017
5. Basak N.N., "Surveying and Levelling", Tata Mcgraw Hill, New Delhi, 2017
6. Agor R., "Surveying and Levelling", Khanna Publishers, New Delhi, 2015
7. Roy S.K., "Fundamentals of Surveying", Prentice Hall of India, New Delhi, 2010
8. Subramanian, R., "Surveying and Leveling", Oxford University Press, New Delhi, 2013
9. Bhatia B., "Remote Sensing and GIS", Oxford University Press, New Delhi., 2011
10. Lillesand T.M., Kiefer R.W., and Chipman J.W., "Remote sensing and Image interpretation", 5th
edition, John Wiley and Sons, India, 2015
11. James M Anderson and Adward M Mikhail, "Surveying : theory and practice", 7th Edition,
Tata McGraw Hill Publication, 2014

ONLINE RESOURCES
1. https://nptel.ac.in/courses/105/103/105103176/
2. https://nptel.ac.in/courses/105/107/105107121/
3. https://nptel.ac.in/courses/105/101/105101206/

80
1.
 19CEE09 - NUMERICAL METHODS FOR CIVIL ENGINEERING

ASSESSMENT: THEORY L T P C
COURSE OUTCOME
At the end of this course, the students will be able to 3 0 0 3
CO1 : Solve linear simultaneous equations by direct and iterative methods.
CO2 : Apply finite difference methods to compute shear force, bending moment and
deflection in beams.
CO3 : Apply numerical integration techniques to find the deflection of non prismatic
beams.
CO4 : Apply eigen values and eigen vectors to find the principal planes, principal axes,
principal stresses and principal moment of inertia.
CO5 : Solve ordinary and partial differential equations to apply in fluid flow problems.

LINEAR SIMULTANEOUS ALGEBRAIC EQUATION

Direct methods: Gauss-elimination, Gauss-Jordan, Triangulation and Partition methods.
Iterative methods: Jacobi and Gauss- Seidel methods.
(9)
FINITE DIFFERENCE METHODS
Applications: Shear force, Bending moment and Deflection variation in statically
determinate beams - Deflection in Statically indeterminate beams - Vibration of beams -
Bending of laterally loaded thin plates. (9)

NUMERICAL INTEGRATION
Trapezoidal Rule, Simpson's one third Rule - Gaussian quadrature formula - Application of
quadrature rule to deflection of non- prismatic simple beams
(9)
EIGEN VALUES AND EIGEN VECTORS
Iterative method (Power method) - Jacobi method - Applications: Principal stresses and
Principal planes - Principal moment of inertia and principal axes - difference in eigen value
problems to buckling of columns
(9)
ORDINARY AND PARTIAL DIFFERENTIAL EQUATIONS
Ordinary Differential Equations: Taylor series method - modified Euler's method - Runge-
kutta method of fourth order - Milne's predictor - corrector method. Partial Differential
Equations: Finite difference approximation - solution of partial differential equations -
Laplace equation - Liebmann's iteration process- Poisson's equation parabolic equation -
Bender-schmidt and Crank-Nicholson scheme- Hyperbolic equation.
(9)

TOTAL: 45Hours

81
1.
TEXT BOOKS
1. Krishna Raju, N. and Muthu K.U., "Numerical Methods for Engineering Problems",
Macmillan India Limited, 2011.
2. Kandasamy, P., Thilagavathy, K., and Gunavathy, K., "Numerical Methods", S. Chand
&Company Limited, 2005.

REFERENCE BOOKS
1. Jain.M.K, Iyengar.S.R.K, and Jain.R., "Numerical Methods for Scientific and
Engineering Computation", New Age International (P) Ltd, Publishers, 2004.
2. Scarborough.J.B, "Numerical Mathematical Analysis", Oxford and IBH Publishing
Company, 1992.
3. Rajasekaran.S., "Numerical Methods in Science and Engineering (A Practical
approach)", A.H. Wheeler & Co.1987.

82
1.
 19CEE10 - FINITE ELEMENT METHOD
ASSESSMENT: THEORY
L T P C
COURSE OUTCOME 3 0 0 3
After successful completion of the course, student will be able to
CO1: Identify and define the basic concepts, shape functions and methods of
discretization in finite element method
CO2: Ascertain the principles and methods utilized for solving finite element problems
CO3: Calculate and ascertain the combinations of plane stress and strain problems
involving finite element analysis
CO4: Derive and assemble the stiffness matrix to evaluate the output element stresses and
forces for trusses.
CO5: Derive and assemble the stiffness matrix to evaluate the output element stresses and
forces for beams and frames
BASICS OF FINITE ELEMENT METHOD
General description - Basic element shapes - Discretization process - Node numbering -
Mesh generation - Steps involved in finite element method - Application of finite element
method - Advantages and disadvantages of finite element method.
(9)
APPROXIMATE METHODS OF ANALYSIS
Energy principles - Variational methods - Rayleigh Ritz method - Method of collocation -
Subdomain method - Galerkin Method - Least squares approach
(9)
PLANE STRESS AND PLANE STRAIN PROBLEMS
Basic concepts of plane stress and plane strain - derivation of stiffness matrix for constant -
strain, linear strain triangular elements - rectangular elements - Iso-parametric elements -
Lagrange and Serendipity elements - static condensation - axisymmetric elements.
(9)
ANALYSIS OF TRUSSES
Stiffness matrix for an axial element - Direct stiffness approach - Element assembly into
global stiffness matrix -two dimensional trusses - displacement of joints - forces in the
members.
(9)
ANALYSIS OF BEAMS AND FRAMES
Beam stiffness - Direct stiffness approach - Element assembly into global stiffness matrix -
solution for beam problems - Two Dimensional beam element - rigid plane frames.
(9)
TOTAL: 45 Hours

83
1.
TEXT BOOKS
1. Reddy J N, "An Introduction to Finite Element Method", McGraw Hill, Singapore,
2006.
2. Daryl L.Logan, "Finite Element Method", Thomson Canada Ltd., India Edition, 2007.

REFERENCE BOOKS
1. Singiresu S. Rao, "The Finite Element Method in Engineering", Butterworth-
Heinemann, India Edition, 2001.
2. Krishnamoorthy C.S, "Finite Element Analysis", Tata McGraw Hill Publishing Co., New
Delhi, 2008.
3. Rajasekaran S, "Finite Element Analysis in Engineering Design", S.Chand and
Company Ltd., 2003.
4. Larry J.Segerlind, "Applied Finite Element Analysis", John Wiley and Sons, New York,
2010.
5. Robert D.Cook, David S.Malkus, "Concepts and Applications of Finite Element
Analysis", John Wiley and Sons, India Edition, 2007.

84
1.
 19CEE11- INDUSTRIAL STRUCTURES
ASSESSMENT: THEORY
L T P C
COURSE OUTCOME
The students are able to, 3 0 0 3
CO1: Acquire the knowledge about the planning and functional
requirements of Industrial structures.
CO2: Understand the current design trends of multi storey building systems and industrial
structures.
CO3: Design the crane girder and gantry girder.
CO4: Design the silos, bunkers and bins along with supporting structures.
CO 5: Understand and design the environmental control structures.

PLANNING AND FUNCTIONAL REQUIREMENTS

Planning of an industrial building based on the functional requirements, Lighting and
ventilation - Fire safety norms - factories act, Different types of loadings.
(9)
INDUSTRIAL FRAMING
Types of roofing Design of Roof, Portals, Pre Engineered Buildings - Design of multi storied
deck slab, Steel platform, wind columns - Foundations and pedestals.
(9)
MATERIAL HANDLING SYSTEMS
Cranes –Types-design of EOT - Manual overhead travelling cranes – Jib Cranes-Design of A-
cranes, monorails. Design of conveyers, conveyer towers
(9)
INDUSTRIAL STORAGE STRUCTURES
Design of silos, bins and bunkers – Design of supporting system for storage hoppers and
bunkers.
(9)
ENVIRONMENTAL CONTROL STRUCTURES
Concept of Electro-static precipitators, functioning and components – wet and dry
scruppers- Design of chimneys – Self-supporting, Guyed and braced.
(9)

TOTAL: 45 Hours
TEXT BOOKS
1. Jurgen Axel Adam, Katharria Hausmann, Frank Juttner, Klauss Daniel, "Industrial
Buildings: A Design Manual", Birkhauser Publishers,2004.
REFERENCE BOOKS
1. Bye law's of Inspector of Factories
2. Alexander Newman, “Metal Building System – Design and specifications”, Second
Edition, Mc Graw Hill, NewDelhi-2004
3. PunmiaB.C., Ashokkumar Jain, “Design of Steel Structures”,Laxmi Publictions, New
Delhi-2004
4. Gaylord E H,Gaylord N C and Stall Meyer J E, “Design of Steel Structures”, Third
Edition, McGraw Hill Publications,1992
85
1.
 19CEE12 - SMART MATERIALS AND STRUCTURES

ASSESSMENT: THEORY L T P C
COURSE OUTCOME 3 0 0 3

After successful completion of the course, student will be able to

CO1: Define the role of actuators and sensors in smart structures.

CO2: Define the engineering principles underlying the behaviour of smart materials
CO3: Define the control methods used in smart structures
CO4: Define the role of actuators and sensors in smart structures.
CO5: Define the signal processing, control systems and biometrics used in smart
structures

SMART MATERIALS
Introduction to Smart Materials and Structures -definitions and implications -
Instrumented structures functions and response - Sensing systems - Self-diagnosis -
Signal processing consideration - Actuation systems and effectors.
(9)
PROPERTIES OF MATERIALS
Materials used in smart systems - Piezoelectric Materials - Piezoelectric properties -
Actuation of structural components - Shape Memory Alloys - Constitutive modeling of
the shape memory effect - vibration control - Embedded actuators -Applications of
shape memory alloys. Electro rheological and magneto rheological fluids - Mechanisms
and Properties - Applications of ER and MR fluids - Fiber Optics - Fiber characteristics -
Fiber optic strain sensors – Applications of optical fibers.
(9)
CONTROL OF STRUCTURES
Control modeling of structures - Control strategies and limitations - classification of
control systems Classical control - Modern control - Optimal control and Digital control -
Active structures in practice.
(9)
SENSORS AND ACTUATORS
Sensing Technology -Characteristics of sensors - Types of Sensors - Physical
Measurement using Piezo Electric Strain measurement - Inductively Read Transducers -
The LVOT - Fiber optic Techniques.Chemical and Bio-Chemical sensing in structural
Assessment - Absorptive chemical sensors Spectroscopes - Fibre Optic Chemical Sensing
Systems and Distributed measurement.Actuator Techniques - Actuator and actuator
materials - Piezoelectric and Electrostrictive Material -Magnetostructure Material -
Shape Memory Alloys - Electro rheological Fluids- Electromagnetic actuation- Role of
actuators and Actuator Materials.
(9)

86
1.
SIGNAL PROCESSING AND CONTROL SYSTEMS AND BIOMIMETICS

Features - Active systems - Adaptive system - Characteristics of control system -

Application examples. Characteristics of natural structures, Biomimetic structural
design, Biomimetic sensing, Challenges and opportunities for Biomimetics, Chemical and
biochemical sensing in structural assessment, Absorptive chemical sensors,
Spectroscopes.
(9)
TOTAL: 45 Hours

TEXT BOOKS

1. Brain Culshaw, "Smart Structure and Materials", Artech House, Borton, London, 1996.
2. Srinivasan, A.V., and Michael McFarland. D., "Smart Structures - Analysis and
Design", Cambridge University Press, 2001.
REFERENCE BOOKS
3. Brian Culshaw, "Smart Structures and Materials", Artech House, Boston, 1996
4. Gandhi.M.V and Thompson.B.S, "Smart Materials and Structures", Chapman and Hall,
NewYork, 1992
5. L.S.Srinath, "Experimental stress Analysis", Tata McGraw-Hill, 1998.
6. Michelle Addington and Daniel L. Schodeck, "Smart Materials and Technology",
Elsevier, 2005.
7. Yoseph Bar Cohen, "Smart Structures and Materials," The international society for
optical Engineering, 2003.

87
1.
 19CEE13- SAFETY IN CIVIL ENGINEERING PRACTICE

ASSESSMENT: THEORY L T P C
COURSE OUTCOME
After successful completion of the course, student will be able to 3 0 0 3
CO1: Recognise the role and responsibility of a professional Civil Engineer in
health and safety.
CO2: Investigate and report the accident occurring at site.
CO3: Apply safety practice and provide safety premises.
CO4: Assess work injury and calculate various rate indices pertaining to safety.
CO5: Apply Safety Training and Safety Education.

ROLES AND RESPONSIBILITIES

Construction Safety Management – Role of various parties, duties and responsibilities of
top management, site managers, supervisors etc. role of safety officers, responsibilities of
general employees, safety committee, safety training, incentives and monitoring. Writing
safety manuals, preparing safety checklists and inspection reports. (9)

SAFETY AUDIT
Components of safety audit, types of audit, audit methodology, non-conformity reporting
(NCR), audit checklist and report – review of inspection, remarks by government agencies,
consultants, experts – perusal of accident and safety records, formats – implementation of
audit indication - liaison with departments to ensure co-ordination – check list –
identification of unsafe acts of workers and unsafe conditions in the shop floor. (9)

ACCIDENT INVESTIGATION AND REPORTING

Concept of an accident, reportable and non-reportable accidents, reporting to statutory
authorities – principles of accident prevention – accident investigation and analysis –
records for accidents, departmental accident reports, documentation of accidents – unsafe
act and condition – domino sequence – supervisory role – role of safety committee –cost of
accident. (9)

SAFETY PERFORMANCE MONITORING

ANSI (Z16.1) Recommended practices for compiling and measuring work injury experience
– permanent total disabilities, permanent partial disabilities, temporary total disabilities -
Calculation of accident indices, frequency rate, severity rate, frequency severity incidence,
incident rate, accident rate, safety “t” score, safety activity rate – problems.
(9)
SAFETY EDUCATION AND TRAINING
Importance of training-identification of training needs-training methods – programmes,
seminars, conferences, competitions – method of promoting safe practice - motivation –
communication - role of government agencies and private consulting agencies in safety
training – creating awareness, awards, celebrations, safety posters, safety displays, safety
pledge, safety incentive scheme, safety campaign – Domestic Safety and Training, safety
laws. (9)
TOTAL: 45Hours
88
1.
TEXT BOOKS:
1. Krishnan N.V. “Safety Management in Industry” Jaico Publishing House, Bombay,1997.
2. Accident Prevention Manual for Industrial Operations”, N.S.C.Chicago, 1982.

REFERENCE BOOKS:
1. Handbook of Occupational Health and Safety, NSC Chicago, 1982.
2. James, D., Fire Prevention Handbook, Butterworths, London, 1986.
3. Gupta R.S., Handbook of Fire Technology, Orient Longman, Bombay, 1997.
4. Fulman, J.B., Construction Safety, Security, and Loss Prevention, John Wiley and Sons,
1979.
5. Alexandrov, M.P., Material Handling Equipment, Mir Publishers, Moscow, 1981.
6. Rudenko N., Material Handling Equipments, Mir Publishers, Moscow, 1981.

89
1.
 19CEE14- REMOTE SENSING AND GIS
L T P C
ASSESSMENT: THEORY
COURSE OUTCOME 3 0 0 3
After successful completion of the course, student will be able to

CO1: Explain the principle and methods of remote sensing

CO2: Integrate the basic elements of visual photo interpretation and aerial photography
CO3: Illustrate the components of imageries and imaging devices
CO4: Apply the concepts of Remote Sensing and GIS in the field of Civil Engineering

PRINCIPLES AND CONCEPTS

Definition - Historical Importance of remote sensing - Principles - and methods of remote
sensing - Electromagnetic spectrum Electromagnetic Radiation and radiation sources -
Interference -Atmospheric effects on remote sensing - Energy interaction with energy
surface features
(9)
AERIAL PHOTOGRAPHY
Definition - Types of air photographs - Geometry of air photo - Parallax - pair of photos -
Height determination - Flight planning - Stereoscopy - Monovision - Binocular vision -
Aerial photo interpretation - Basic elements - Techniques of photo interpretation -
Application of aerial photo interpretation - photographs versus maps.
(9)
IMAGERY
Landsat imagery - Digital image processing - Comparison with aerial photographs - Imaging
devices - Aerial camera - Panoramic camera – Satellites – Geo Stationery – Sun
Synchronous Satellites – Platforms and Sensors – types - Characteristics.
(9)
GIS
GIS – Structure of GIS – various components of GIS – vector and raster data – analysis of
data –Introduction to various GIS softwares – Introduction to GPS – Principles
(9)
APPLICATIONS OF GIS AND REMOTE SENSING
Application of Remote Sensing and GIS in water resources engineering, land use studies,
soil sciences, geology, agriculture, forestry, oceanography.
(9)

TOTAL: 45 Hours
TEXT BOOKS:
1. Bhatia S.C, “Fundamentals of remote sensing”, New Delhi Atlantic Publishers, 2008.

REFERENCE BOOKS:
1. Floyd F.Sabins, J.R., WH, “Remote Sensing Principles Interpretation”, Freeman and
Company and Francis Conpany, France, 1996.
2. Lillesand, Thomas.M and RaiphW.Kiefer, “Remote Sensing and Image Interpretation”,
John Wiley Sons, 2003.
90
1.
Online Resources:
1. https://nptel.ac.in/courses/105/108/105108077/
2. https://nptel.ac.in/courses/105/103/105103193/

91
1.
 19CEE15- GROUND IMPROVEMENT TECHNIQUES
ASSESSMENT: THEORY
L T P C
COURSE OUTCOME
At the end of this course, the students will be able to 3 0 0 3
CO1: Identify problematic soil properties and select a suitable ground
improvement technique to improve the same.
CO2: Acquire a fundamental knowledge on various ground improvement techniques.
CO3: Design simple ground improvement techniques.

PROBLEMATIC SOIL AND IMPROVEMENTTECHNIQUES

Role of ground improvement in foundation engineering – Methods of ground
improvement – Geotechnical problems in alluvial, lateritic and black cotton soils –
Selection of suitable ground improvement techniques based on soil conditions.
(9)

DEWATERING
Dewatering Techniques - Well points – Vacuum and electro osmotic methods – Seepage
analysis for two dimensional flow for fully and partially penetrated slots in
homogeneous deposits – Design for simple cases
(9)
INSITU TREATMENT OF COHESIONLESS AND COHESIVESOILS
Insitu densification of cohesionless soils - Dynamic compaction - Vibroflotation, Sand
compaction piles and deep compaction. Consolidation of cohesionless soils - Preloading
with sand drains, and fabric drains, Stabilization of soft clay ground using stone columns
and Lime piles-Installation techniques – Simple design - Relative merits of above
methods and their limitations.
(9)

EARTHREINFORCEMENT
Concept of reinforcement – Types of reinforcement material – Reinforced earth wall –
Mechanism - Simple design - Applications of reinforced earth; Functions of Geotextiles in
filtration, drainage, separation, road works and containment applications
(9)
GROUTING TECHNIQUES
Types of grouts – Grouting equipments and machinery – Injection methods – Grout
monitoring – Stabilization with cement, lime and chemicals – Stabilization of expansive
soil.
(9)
TOTAL: 45Hours

TEXTBOOKS:
1. Purushothama Raj. P, “Ground Improvement Techniques”, Firewall Media,2005.
2. Koerner, R.M. “Construction and Geotechnical Methods in Foundation
Engineering”, McGraw Hill,1994.

92
1.
 REFERENCES:
1. Moseley, M.P., “Ground Improvement Blockie Academic and Professional”,
Chapman and Hall, Glasgow,2004.
2. Moseley, M.P and Kirsch. K., ‘Ground Improvement mediation”, Sponress, Taylor
and Francis Group, London,2004.
3. Jones C.J.F.P. “Earth Reinforcement and Soil Structure”, Thomas Telford
Publising,1996.
4. Winterkorn, H.F. and Fang, H.Y. “Foundation Engineering Hand Book”. Van
Nostrand Reinhold,1994.
5. Das, B.M., “Principles of Foundation Engineering” (seventh edition), Cengage
learning, 2010.
6. Coduto, D.P., “Geotechnical Engineering – Principles and Practices”, Prentice Hall
of India Pvt.Ltd. New Delhi,2011.
7. Koerner, R.M., “Designing with Geosynthetics” (Fourth Edition), Prentice Hall,
Jersey, 2012.
8. IS Code 9759 : 1981 (Reaffirmed 1998) “Guidelines for Dewatering During
Construction”, Bureau of Indian Standards, NewDelhi.
9. IS Code 15284 (Part 1): 2003 “Design and Construction for Ground Improvement
– Guidelines” (Stone Column), Bureau of Indian Standards, NewDelhi.

ONLINE RESOURCES:
1. https://nptel.ac.in/courses/105/108/105108075/

93
1.
 19CEE16 - DESIGN OF DEEP FOUNDATION

ASSESSMENT: THEORY L T P C
3 0 0 3
COURSE OUTCOME
At the end of this course, the student will be able to
CO1: Explain classification and selection of piles as per requirements.
CO2: Compute load carrying capacity and settlements of pile and pile groups.
CO3: Analyze behavior of piles subjected to lateral load and uplift loads.
CO4: Analyze and design pile and pile group as per requirements
CO5: Analyze stability of caissons for different influencing factors and understand IRC
guidelines
PILE CLASSIFICATIONS
Function - classification of piles - Factors governing choice of pile foundation - Load
transfer principles - piling equipments and methods - changes in soil condition during
installation of piles - requirement of code of practice - responsibility of engineer and
contractor. (9)

AXIALLY LOADED PILES AND PILE GROUPS

Allowable load evaluation of piles and pile groups - Static method - cohesive -
cohesionless soil - time effects - Dynamic method-pile driving formulae - Wave equation
application - modeling - theoretical analysis - Interpretation of field test results and pile
load test results - Settlement of Piles and Pile groups. (9)
LATERAL AND UPLIFT LOAD EVALUATION
Piles subjected to Lateral loads - Broms method, elastic -p-y curve analyses - Batter piles -
response to moment - pile subjected to uplift loads - load -deformation behaviour -
Lateral and uplift load test data interpretation. Foundation on week compressible-
collapsible soil - case studies (9)

STRUCTURAL DESIGN OF PILE AND PILE GROUPS

Pile foundation - structural design - pile cap analysis, pile - raft system basic interactive
analysis - pile and pile groups subjected to vibrations - fundamental solutions. (9)

CAISSONS
Caissons types - Stability of caissons - principles of analysis and design, seismic influences
- IRC Guidelines. (9)
TOTAL: 45 Hours
REFERENCE BOOKS
1. Das B.M., "Principles of Foundation Engineering, Design and Construction", Fourth
Edition, PWS Publishing, 1999.
2. Poulos H.G., Davis, E.H., "Pile foundation analysis and design", John Wiley and Sons,
New York, 1980.

94
1.
3. Tomlinson M.J., "Foundation Engineering", ELBS, Longman Group, U.K. Ltd., England
1995.
4. Cernica J.N., "Geotechnical Engineering Foundation Design", John Wiley and Sons, Inc.
1995.
5. Bowles J.E., "Foundation Analysis and Design", Fifth Edition, McGraw Hill, New York,
1996.
6. Donald P., Coduto, "Foundation Design Principles and Practices", Prentice Hall, Inc.
Englewood Cliffs, New Jersey, 1996.

95
1.
 19CEE17 EARTHQUAKE RESISTANT DESIGN OF MASONRY AND TIMBER
STRUCTURES

ASSESSMENT: THEORY L T P C
COURSE OUTCOME
At the end of this course, the student will be able to 3 0 0 3

CO1: Understand the basic concepts of structural design of masonry and timber
structures

CO2: Design the brick masonry structures as per Indian standards

CO3: Design the timber structures as per Indian standards

CO4: Design the brick masonry and timber structures for seismic resistance as per
Indian standards

FUNDAMENTALS OF STRUCTURAL DESIGN

Classification of structures-function, material and shape- different structural systems-

requirements of structures- stability, strength and stiffness-design methods-working
stress method- limit state method of design- Different types of load- Codes of practice.
Engineering Seismology-Terms associated with earthquakes-Characteristics of ground
motion- Seismic zones of India.

(9)

DESIGN OF BRICK MASONRY STRUCTURES

Classification of brick masonry structures- Design considerations of brick masonry-

Permissible stresses- Load bearing walls- Design of load bearing walls and columns-
Pressure calculation of masonry walls.

(9)

EARTHQUAKE RESISTANT DESIGN OF BRICK MASONRY STRUCTURES

General planning and design- recommendations for masonry wall-behaviour of

unreinforced and reinforced masonry wall under gravitational and lateral loading-limit
state design of reinforced brick masonry- lintel band- Free standing walls- Behaviour of
masonry structures during past earthquakes- Codal provisions.

(9)

DESIGN OF TIMBER STRUCTURES

Properties and strength of timber used in constructions- Permissible Stresses- Grading

of timber. Joints in timber structures- Design of bolted and nailed joints. Timber beams
(rectangular) - Solid columns- Combined bending and direct stress. (9)

96
1.
EARTHQUAKE RESISTANT DESIGN OF TIMBER STRUCTURES

Review of structural timber element design-Introduction to design of shear walls and

flexible diaphragm walls- seismic design considerations- Connections to resist the
lateral forces- Behaviour of timber structures during past earthquakes- Codal
provisions.

(9)

TOTAL: 45 Hours

TEXT BOOKS

1. Anand S. Arya, "Masonry and Timber Structures including Earthquake Resistant

Design", Nemchand & Bros., Roorkee, 2006.
2. Dayarathnam, P., "Brick and Reinforced Brick Structures", Oxford & IBH Publishing
House, 1997.
REFERENCE BOOKS
1. Ramchandra, V. Gehlot, “Design of Steel Structures (Vol. 1)” Scientific Publishers,
2016.
2. Duggal, S.K., "Earthquake Resistant Design of Structures", Oxford University Press,
2007.
3. IS: 1905 – Code of Practice for Structural use of Unreinforced Masonry, 1987.
4. SP 20 (S & T),”Hand Book on Masonry Design and Construction”, Bureau of Indian
Standards, 1991.
5. IS: 883, “Code of Practice for Design of Structural Timber in Building”, Bureau of
Indian Standards, 1994.
6. IS: 2366, “Code of Practice for Nail- Jointed Timber Constructions”, Bureau of
Indian Standards, 1983.
7. IS 13827: 1993, “Improving Earthquake Resistance of Earthen Buildings-
Guidelines”, Bureau of Indian Standards, 1993.
8. IS 13828: 1993, “Improving Earthquake Resistance of Low Strength Masonry
Buildings - Guidelines”, Bureau of Indian Standards, 1993.

97
1.
 19CEE18 BUILDING SERVICES AND MAINTENENCE ENGINEERING

ASSESSMENT: THEORY L T P C
COURSE OUTCOME 3 0 0 3

After successful completion of the course, student will be able to:

CO1: Evaluate and suggest appropriate fire safety system as per the NBC for buildings..

CO2: Formulate electrical layout for buildings based on specifications, methods, usage and
codal regulations.

CO3: Evaluate AC loads for small halls/rooms and suggest suitable systems.

CO4: Finalise the plumbing layout and waste water systems required for buildings as per
guidelines.

CO5: Formulate maintenance plan for all building services and equipment.

FIRE SAFETY INSTALLATIONS

Causes of fire in buildings - Safety regulations - NBC - Planning considerations in buildings

like non-combustible materials, construction, staircases and lift lobbies, fire escapes and
A.C. systems. Heat and smoke detectors - Fire alarm system- Firefighting pumps and water
storage - Dry and wet risers - Automatic sprinklers. Special features required for
physically handicapped and elderly.

(9)

ELECTRICAL SYSTEMS IN BUILDINGS

Basics of Single/Three phase supply - Protective devices – Earthing, types of earthing -

Types, sizes of wires, wiring systems- main and distribution boards – Load calculations –
Planning electrical wiring for buildings – Back-up generator- Transformers -Solar off grid
supply and back up, calculations. Lift systems-types-capacity calculations and standards.

(9)

AIR CONDITIONING

Psychrometric properties – Psychrometric chart – Psychrometric processes – Cooling and

Heating load calculations - air conditioning cycles - winter, summer and year round,
unitary (window & split) air conditioning systems - effective temperature - comfort
conditions. Duct design (theoretical treatment) – economic considerations and methods -
air distributing systems - humidification - air cleaning – controls. (9)

98
1.
PLUMBING AND WASTE WATER SYSTEMS IN BUILDINGS

Planning for plumbing-water supply scales-capacity calculations-UGT and OHT

requirement-FU’s-pipe sizing-Hazen-Williams formula/ charts-Types and design of
systems for Multi-storey buildings. Waste water appliances-DU’s-calculations-Pipe
Layout-One/Two Pipe, Stack systems for multi storey buildings.

(9)

MAINTENANCE MANAGEMENT

Building maintenance/facilities management-Planning-Budgeting-Maintenance Teams-

Maintenance standardsand contracts/AMC’s-MIS for building maintenance-BMS-
Economic maintenance decisions.

(9)

TOTAL: 45 Hours

TEXT BOOKS

1.David V Chadderton-Building Services Engineering, 5th Edition (2007)

2. Frank Booty, Facilities Management Handbook

3. Basic Electrical Engineering –T.K.Nagasarkar and M.S. Sukhija Oxford University

4. Domkundwar and Arora, "A course in Refrigeration and Air Conditioning", Dhanpat
Rai and Co. (P) Ltd., 2007.

5. SP7 : 2016, National Building Code of India.

REFERENCE BOOKS

1. Barrrie Chanter, Peter Swallow-Building Maintenance Management –Wiley

Blackwell (2007).

2. William H. Severns and Julian R. Fellows, "Air-conditioning and Refrigeration",

John Wiley and Sons, London, 1988.

3. A.F.C. Sherratt, "Air-conditioning and Energy Conservation", The Architectural

Press, London, 1980.

4. SP 32 (1986) – Lighting and Ventilation.

5. SP 30 (2011) – National Electrical Codes.

6. SP 35 – Handbook on water supply and Drainage

7. IS 14665 (2000)- Part I, Part II, Part IV- Lifts

99
1.
 8. IS 1172(Reaffirmed 2002) -Code for basic Requirement for Water Supply,
Drainage and Sanitation

9. IS 2065(Reaffirmed 1996) - Code of Practice for Water Supply in Buildings.

10. IS 1742(Reaffirmed 2002) - Code of practice for building drainage

11. IS 12183(Reaffirmed 2004) - Code of Practice for Plumbing in Multi-Storeyed

Buildings.

12. Mahesh M Rathore, Thermal Engineering, Tata McGraw-Hill, 2018.

13. Manohar Prasad, "Refrigeration and Air Conditioning", Wiley Eastern Ltd., Third
Edition, 2007.

14. Domkundwar and Arora, "A course in Refrigeration and Air Conditioning",
Dhanpat Rai and Co. (P) Ltd., 2007.

100
1.
 19CEE19 OPTIMIZATION TECHIQUES IN CIVIL ENGINEERING

ASSESSMENT: THEORY L T P C

COURSE OUTCOME 3 0 0 3

After successful completion of the course, student will be able to

CO1: Apply various optimization techniques in real world problems related to civil
engineering.

CO2: Solve the linear programming problems for minimizing project cost and maximizing
its profit.

CO3: Formulate multi-objective problems and analyze the non linear methods of
optimization.

CO4: Solve multi-stage decision problems to get optimal solution.

CO5: Solve transportation, assignment and resource allocation problems and conduct
simulation analysis to examine the robustness of optimal solutions.

LINEAR PROGRAMMING
Formulation of problems - Graphical solution- Standard form - Slack, surplus and
artificial variables - Canonical form - Basic feasible solution - Simplex method - Two
phase method - Zi- Cj method - Big M method - Duality Theory - Primal and Dual
algorithm.
(9)

NON - LINEAR PROGRAMMING

One dimensional minimization - search methods - Exhaustive search - Dichotomous
search - Fibonacci method - Golden section method - Descent methods - Cauchy's
method - Fletcher - Reeves method. Constrained optimization - Penalty Function
method.
(9)

GEOMETRIC PROGRAMMING
Polynomial - degree of difficulty - reducing G.P.P to a set of simultaneous equations -
unconstrained and constrained problem with zero difficulty - concept of solving
problem with one degree of difficulty.
(9)

101
1.
 DYNAMIC PROGRAMMING
Bellman's principle of optimality - Representation of a multi stage decision problem -
concepts of suboptimazion problems using classical and tabular methods.
(9)

ALLOCATION MODELS AND SIMULATION IN CONSTRUCTION SYSTEM

Transportation models - Assignment models - Sequencing problems - Simulation
approach and models - generation of data - Monte carlo simulation.
(9)
TOTAL: 45 Hours
TEXT BOOKS
1. Rao S.S., "Optimization Theory and Applications", New Age International Publishers,
New Delhi, 1999.
2. Vohra N.D., "Quantitative Techniques in Management", Tata Mcgraw Hill Education
Private Limited, 2011
REFERENCE BOOKS
1. Stark R.M. and Nichols, "Mathematical Foundation for Design of Civil Engineering
Systems", Mc Graw Hill, Newyork, 1995.
2. Ossenbruggen P.J., "Systems Approach to Civil Engineering Planning and Design",
John Wiley & Sons, Canada , 1987.
3. Jewell T.K., "Systems Approach to Civil Engineering Planning and Design", Harper &
Row, Publishers, New York, 1991.

ONLINE RESOURCE:
1. https://nptel.ac.in/courses/105/108/105108127/

102
1.
 19CEE20 THEORY OF ARCHITECTURE

ASSESSMENT : THEORY L T P C
3 0 0 3
COURSE OUTCOME

After successful completion of the course, student will be able to

CO1: Present architectural designs associated with spaces, mass, visual and emotional
effects.

CO2: Explain the design components and 3D structural concepts

CO3: Explain components of building circulation, space requirements.

CO4: Present the Design of buildings based on harmony, colour and punctuation effect.

CO5: Present the acoustical design of buildings, classrooms, concert halls with suitable
absorption materials.

OVERVIEW OF ARCHITECTURE

Definition of Architecture - Elements of Architecture - need and fulfilment - Architecture

design - An analysis - Integration of aesthetic and function - Mass and space, visual and
emotional effects of geometric forms & their derivatives.

(9)

COMPONENTS OF DESIGN

Space - Form - Composition - Dimension - proportion, scale, balance, rhythm, symmetry,

hierarchy, pattern and axis with building examples. Concept development - 3D design
structural concept - structural arrangement, stability and load paths - rule of thumb
sizing - Designing from a brief for specific user needs - Role of Brief and Basic brief
development.

(9)

CIRCULATION

Function of building circulation - components of building circulation - The building

approach, the building entrance, configuration of the path, Path space relationship, form
of circulation space with examples. Simple circulation diagram for building.

Congregate living - housing - neighborly space outside dwelling - Integrated architecture

design of medium depth space - Hierarchies of public / private space. Relationships
between structure, Construction and spatial order. Understanding and meeting
standards. (9)
103
1.
 PRINCIPLES OF COMPOSITION

Unity, harmony & specific qualities of design to include dominance ,punctuating effect,
dramatic effect, fluidity, climax accentuation and contrast with building examples. -
Rendering - Developing an understanding the importance of colour schemes in design
presentation as well as its application on built forms to create pleasing environment.

(9)

ARCHITECTURE ACOUSTICS

Sound waves - frequency - Intensity - wavelength - Decibel scale - Tone structure -

Outdoor noise levels - Acceptable indoor noise levels - absorption co-efficient -
measurement - Choice of absorption materials - Treatment for interior surfaces - basic
principles in designing open air theatres- Cinemas - Broadcasting studios - Concert halls
- Classrooms - Lecture halls and Theatres.

(9)

TOTAL: 45 Hours

REFERENCE BOOKS

1. Sir Bannister Fletcher, "A History of Architecture", Butterworths, London, 1987.

2. Fransis D.K. Ching, "Architecture - Form, Space and Order", Van Nostrand
Publications, New York, 1979.

3. Ven Meiss, "Elements of Architecture", Van Nostrand Publications, London, 1986.

4. https://nptel.ac.in/courses/124/107/124107012/

104
1.
 19CEE21 GREEN BUILDING CONCEPTS AND PRACTICES
ASSESSMENT: THEORY L T P C
COURSE OUTCOME
3 0 0 3
After successful completion of the course, student will be able to
CO1: Outline the basic concept of green building.
CO2: Assess the different components of the green building.
CO3: Assimilate the green building rating system.
CO4: Apply the green building auditing for effective Management.
GREEN BUILDING PERSPECTIVE:
Introduction to Green Buildings: Definition of green buildings and sustainable development
- Impact of design, construction & maintenance of buildings on our environment and
natural resources - Components of Green Building ––Operational energy in Building and
Life cycle energy- Embodied energy - Opportunities of Green Building - benefits of green
buildings towards sustainable development.
(9)
SITE SELECTION AND PLANNING
Criteria for site selection- preservation of landscape-minimizing urban heat island effect-
maximize comfort by proper orientation of building facades - Rainwater harvesting
methods for roof & non-roof, reducing landscape water demand with recycle and reuse of
waste water systems.
(9)
MATERIAL CONSERVATION AND INDOOR ENVIRONMENTAL QUALITY
Waste reduction during construction -materials with recycled content- local materials
selection -material reuse-certified wood -Rapidly renewable building materials and
furniture - day lighting -air ventilation, exhaust systems - low VOC paints, materials &
adhesives -Air conditioning - Indore air quality - Sick building syndrome -Reasons for poor
IAQ- Measures to achieve Acceptable IAQ levels.
(9)
GREEN BUILDING RATING SYSTEM
Green Building initiatives in India - Benefits Experienced in Green Buildings - Indian Green
Building Council- - Launch of Green Building Rating Systems - Green Performance rating -
requirements of LEED - GRIHA - Energy Conservation Building Code requirements -
Concepts of Overall Thermal Transfer Value (OTTV).
(9)
CASE STUDY:
Case study on Green building Auditing- Energy management – water management – carbon
footprint- preliminary Audit and Detailed audit – suggestions. (9)
Total: 45 hours

105
1.
TEXT BOOKS
1. Kent Peterson, Standard for the design for High Performance Green Buildings, IGCC,
2009
2.Tomwoolley and Samkimings, Green Building Hand Book,Volume 1, Taylor & Francis
2009.
REFERENCE BOOKS:
1. Handbook on Green Practices, Indian Society of Heating Refrigerating and Air
conditioning Engineers, 2009.
2. Wines James &Jodido Philip, “Green Architecture – The Art of Architecture in the age of
Ecology”, Tachen Publishers, New York, 2000.
3. Mackenzie Dorothy, “Green design: design for the Environment”, Laurence King, London,
1997.
4. Farmer John & Richardson Kenneth, “Green Shift: Changing attitudes in architecture to
the Natural World”, Architectural Press, Boston, 1999.
5. Energy Conservaton Building Code , Bureau of Energy Effeciency, Ministry of Power,
Government of India, 2017.
ONLINE RESOURCES
1. NPTEL Resources related to green building systems.

106
1.
 19CEE22- DESIGN OF ENVIRONMENTAL STRUCTURES AND DRAWING

ASSESSMENT: THEORY L T P C
COURSE OUTCOME:
3 0 0 3
At the end of this course the student will be able to,
CO1: Design the various units of conventional water and wastewater treatment.
CO2: Illustrate the different environmental structures
CO3: Design the plumbing system for both water supply and wastewater collection
CO4: Employ the techniques, skills, and modern engineering tools necessary for
environmental engineering practices.
CO5: Interpret the current needs to control water usage by adopting suitable technical
skills in the design of water supply works.

WATER TREATMENT UNITS

Objective of Water Treatment- Layout of Water Treatment Plant – Objective, Principle,
Design and Drawing of Sedimentation Tank –Clarifloculator–Slow and Rapid Sand Filter.
(9)

WASTEWATER TREATMENT UNITS.

Objective of Municipal and Industrial Waste Water Treatment – Objective, Principle, Design
and drawing of Screens – Grit Chamber - Primary and Secondary Settling Tanks - Trickling
filter - Activated Sludge Process.
(9)
DIGESTION AND DISPOSAL UNITS
Objective, Principle, Design and Drawing of –UASB Reactor- Sludge Digestion Tank – Sludge
Drying Bed – Septic Tank with Dispersion Trench and Soak Pit – Imhoff Tank.
(9)

SEWAGE TREATMENT PLANT WORKS

General Layout of Sewage Treatment Plant – Design and Drawing of Domestic Sewage
Treatment Plant for a Town – General Principles Governing the Design of Sanitary
Plumbing System – Minimum Sanitary Fixtures for Different types of Buildings (Indian
standards) - Systems of Plumbing of Drainage work in a Building.
(9)
WATER TREATMENT PLANT WORKS
Water piping systems in buildings – Design Considerations – Water Demand for a Building
– Required flow for various water supply fixtures and drawing - Design and Drawing of
Rain water Harvesting system – Design and drawing of water treatment plant for a town.
(9)
TOTAL: 45Hours

TEXT BOOKS:
1. Garg S. K., "Environmental Engineering", Vol. I Khanna Publishers, New Delhi, 33rd
edition.
2. Garg S. K., "Environmental Engineering", vol. II, Khanna Publishers, New Delhi, 39th
edition.
107
1.
3. Metcalf and Eddy, "Wastewater Engineering Treatment, Disposal and Reuse", McGraw-
Hill Publishing Co, Indian Edition, New Delhi, 2005.

REFERENCE BOOKS:
1. Mark J. Hammer, "Water and Waste Water Technology", Prentice hall of India 2008.
2. Hussain S. K., "Text Book of Water Supply and Sanitary Engineering", Oxford and IBH,
1994.
3. Duggal K.N., "Elements of public Health Engineering", S.Chand and Company Ltd, New
Delhi, 1998.
4. Manual on Sewerage and Sewage Treatment Systems, CPHEEO Manuals, Ministry of
Housing and Urban Affairs , Govt. of India, New Delhi, 2013.

ONLINE RESOURCES:
1. www.digimat.in/nptel/courses/video/105106119/L01.html

108
1.
 19CEE23 - AIR POLLUTION AND CONTROL
ASSESSMENT: THEORY
L T P C
COURSE OUTCOME 3 0 0 3
After successful completion of the course, student will be able to
CO1: Outline the quality of air and its impact on the environment based on the national air
quality standards.
CO2: Design the effective stack height to disperse the plume generated from industries in
a given locality.
CO3: Demonstrate the procedure for air sampling and reporting the extent of air pollutant
in a locality.
CO4: Interpret the procedure for controlling the air pollution through controlling
methods.
CO5: Evaluate the level of air pollution inside a building based on indoor air quality
standards

CLASSIFICATION AND EFFECTS OF AIR POLLUTION

Sources and classification of air pollutants - major emissions from global sources,
importance of Anthropogenic sources - effect on human health, vegetation, animals,
property, aesthetic value and visibility- Photochemical smog - green house gases - ozone
layer depletion - Ambient Air Quality and Emission standards - Air Pollution Indices -
Emission Inventories. (9)
METEOROLOGY AND SAMPLING

Effects of meteorology on Air Pollution - horizontal atmospheric motion, vertical motion

in atmosphere, Atmospheric stability,Temperature Inversion, Wind rose diagram and
stack plume patterns- Atmospheric Diffusion Theories - Dispersion models, Plume rise -
Design of effective stack height - Air pollution sampling and measurement - Types of
pollutant sampling and measurement, ambient air sampling, collection of gaseous air
pollutants, collection of particulate pollutants, stack sampling, analysis of air pollutants -
sulphur dioxide, nitrogen oxides, carbon monoxide, oxidants and ozone, hydrocarbons,
particulate matter (9)
CONTROL OF PARTICULATE CONTAMINANTS
Air pollution control methods and equipment - Control methods, source correction
methods, Factors affecting Selection of Control Equipment - particulate emission control
- working principle, design and application of gravitational settling chambers, cyclone
separators, electrostatic precipitators and depth filters. (9)
CONTROL OF GASEOUS CONTAMINANTS
Factors affecting Selection of Control Equipment - Control of gaseous emissions -Dry
methods, wet scrubbing methods, combustion, biological methods - Control of specific
gaseous pollutants -Control of sulphur dioxide emission, desulphurisation of flue gases,
Control of nitrogen oxides, Modification of operating conditions, effluent gas treatment

109
1.
methods, Carbon monoxide control, control of hydrocarbons-Carbon monoxide
poisoning - Hydrogen Sulphide poisoning. (9)
INDOOR AIR QUALITY MANAGEMENT
Sources, indoor and outdoor concentration - models -simple box model, complex model
- control of indoor air Quality- indoor emission - sick building syndrome types - Radon
Pollution and its control - Membrane process - UV photolysis - risk related to poor
indoor air quality - strategies for creating premium indoor air quality (IAQ) - indoor air
quality (IAQ) and green building rating systems - LEED rating system (9)
TOTAL: 45 Hours
TEXT BOOKS

1. Noel de Nevers, "Air Pollution Control Engineering", McGraw Hill, New York, 1995.
2. Lawrence K. Wang, Norman C. Parelra, YungTse Hung, "Air Pollution Control
Engineering", Tokyo, 2004.
3. C.S.Rao., "Environmental Pollution Control Engineering", Wiley Eastern Ltd, Delhi.
REFERENCE BOOKS
1. David H.F. Liu, Bela G. Liptak "Air Pollution", Lweis Publishers, 2000.
2. Anjaneyulu. Y., "Air Pollution and Control Technologies", Allied Publishers (P) Ltd.,
India, 2002.

110
1.
 19CEE24 - SOLID AND HAZARDOUS WASTE MANAGEMENT
ASSESSMENT: THEORY
COURSE OUTCOME L T P C
After successful completion of the course, student will be able to
3 0 0 3
CO1: Outline the salient features of solid waste management and
handling.
CO2: Deduce the source reduction, recycling and reuse techniques of solid waste.
CO3: Analyze the collection systems and method of transfer of solid waste.
CO4: Describe the processing techniques for solid and hazardous waste.
CO5: Select the suitable methods for disposal of solid and hazardous waste.
CO6: Interpret the legislation for management, handling and disposal of solid and
hazardous waste.
CHARACTERISTICS AND SOURCE REDUCTION OF SOLID WASTE
Definition, sources, and types of solid waste - Composition, physical, chemical and
biological Properties of solid wastes - Per capita generation rates - Sampling and
characterization of solid waste - Source reduction of wastes -Waste exchange - Recycling
and reuses - Salient features of Indian legislations on management and handling of
municipal solid wastes. (9)
COLLECTION AND TRANSPORT OF SOLID WASTE
Estimation of solid waste and factors affecting generation rates - On-site handling,
storage, and processing- Collection services: municipal and commercial - Industrial
services - Collection systems: Hauled-container system (HCS) and stationary container
system (SCS) - Vehicle and labour assessment - Assessment of collection route - Transfer
and transport-Transfer station location- Means and methods of transfer. (9)
PROCESSING AND DISPOSAL OF SOLID WASTE
Objective of processing - material separation and processing technologies- biological,
chemical and thermal conversion technologies- disposal in Landfills: site selection
methods and operations, leachate and gas generations and movement and control of gas
and leachate techniques - Composting: aerobic and anaerobic - Resource and energy
recovery schemes. (9)
HAZARDOUS WASTE CHARACTERIZATION AND MANAGEMENT
Definitions and Identifications of hazardous waste - Origin and characterization of
hazardous solid waste- Typical hazardous wastes in MSW - Hazardous waste
management: minimization, collection, storage, handling, transport, and disposal -
design of hazardous waste landfills - TCLP tests - National and International legislation
for hazardous waste management - Atomic Energy Regulatory Board -International
Atomic Energy Agency - Department of Atomic Energy - Nuclear Power Corporation -
Nuclear power plants in India. (9)
NUCLEAR WASTEAND e-WASTE
Sources - classification - effects of nuclear waste- initial treatment of nuclear waste -
vitrification, ion exchange, synroc - long term management - above ground disposal,

111
1.
geological disposal, ocean dumping, transmutation, space disposal - reuse of waste -
nuclear safety and waste regulation - case study on nuclear disaster - source of e- waste -
material composition of e - waste - recycling and recovery - integrated approaches to e -
waste recycling - socio economic factors - treatment option - disposal option - e - waste
legislation. (9)
TOTAL: 45 Hours
TEXT BOOKS

1. Tchobanoglous, G. et al., "Integrated Solid Waste Management", McGraw-Hill

Publication., New York,1993.
2. Ronald E. Hester,Roy M. Harrison "Electronic Waste Management", Royal Society of
Chemistry, 2009.
REFERENCE BOOKS
1. Peavy, SH, Rowe, RD and Tchobanoglous, G, "Environmental Engineering", McGraw-
Hill Inter Edition,1985.
2. Charles, A.W., "Hazardous Waste Management", McGraw-Hill Publications, 2002.

112
1.
 19CEE25 - ENVIRONMENTAL IMPACT ASSESSMENT
ASSESSMENT: THEORY L T P C
COURSE OUTCOME
3 0 0 3
At the end of this course, the student will be able to

CO1: Outline the overall perspectives of Environmental Impact Assessment.

CO2: Design the necessary tools pertaining to assessment of various impacts.
CO3: Recognize and synthesis the diversified socio-economic impacts on the society.
CO4: Design and develop the significant protocols for Environment Management Plan.
CO5: Synthesize and discretise the various impacts originating from typical
developmental projects.

ENVIRONMENTAL IMPACT ASSESSMENT PERSPECTIVES

Impact assessment introduction -Historical perspective -Scope and goals of EIA - Legal
and Regulatory aspects in India - Types and limitations of EIA - Scope studies for
Environmental Impact Studies (EIS). Preparation for EIS Planning, Public Participation
and Review of EIS. (9)
ASSESSMENT AND MONITORING
Environmental setting - environmental impact assessment methodology- cost benefit
analysis, environmental indices and indicators for describing affected environment, Life
cycle assessment. Role of remote sensing and GIS in Environmental Impact Assessment
(9)
SOCIO-ECONOMIC IMPACT ASSESSMENT
Types, steps in performing socio-economic impact assessment, analysis of public
services and facilities impacts, social impacts, impacts of economic profile of the
community. (9)
ENVIRONMENTAL MANAGEMENT PLAN
Environmental Management Plan - preparation, implementation and review - Mitigation
and Rehabilitation Plans - Policy and guidelines for planning and monitoring
programmes - Post project audit - Ethical and Quality aspects of Environmental Impact
Assessment. (9)
SECTORAL ENVIRONMENTAL IMPACT ASSESSMENT
EIA related to the following sectors - Infrastructure -construction and housing Mining -
Industrial - Thermal Power - River valley and Hydroelectric projects-Nuclear Power- EIA
for coastal projects. (9)
TOTAL: 45 Hours

113
1.
TEXT BOOKS

1. Canter.R.L, "Environmental Impact Assessment", McGraw Hill, New Delhi, 1996.

2. Shukla,S.K., Srivastava.P.R., "Concepts in Environmental Impact Analysis", Common
Wealth Publishers, New Delhi, 1992.

REFERENCE BOOKS
1. Rao, J.G., and Wotten, D.C., "Environmental Impact Analysis, Handbook", McGraw-Hill,
1980.
2. Van Nostr, and Reinhold, J.E. Heer, Hagerty,D. J., "Environmental Assessment and
Statement", 1977.
3. Canter, L.W., "Environmental Impact Assessment", McGraw-Hill, New York, 1996.
4. "Environmental Assessment Source book", Vol. I, II &III, The World Bank,
Washington, D.C, 1991.

114
1.
 19CEE26- INDUSTRIAL WASTEWATER MANAGEMENT

ASSESSMENT: THEORY L T P C
COURSE OUTCOME
At the end of this course, the student will be able to 3 0 0 3
CO1: Outline the waste water characteristics and environmental
implications of various industrial effluents
CO2: Interpret the Wastewater minimization techniques.
CO3: Illustrate the importance of Advanced Wastewater Treatment systems.
CO4: Interpret the manufacturing processes of industries and compare the characteristics
of Industrial effluents.
CO5: Implement the suitable treatment process for the industries based on the
characteristics of Wastewater.

INDUSTRIAL WASTEWATER PERSPECTIVES

General characteristics of industrial wastewaters - Objectives and management of
industrial wastewaters - Effluent and stream standards for disposal of wastewaters - Sewer
ordinance - Effects of untreated and/or partially treated wastewaters on disposal into land,
rivers, sea and ocean-zero Liquid discharge, effluent treatment - individual and common
effluent treatment plant
(9)
WASTEWATER MINIMIZATION AND ADVANCED WASTEWATER TREATMENT
Volume and strength reductions - Reduce, Reuse and Recycle concepts - waste auditing -
Objectives, principles and process description of equalization, neutralization, floatation
process, types of aeration system -Chemical oxidation, chemical precipitation, adsorption,
membrane filtration process, gas stripping and ion exchange process- evaporators.

(9)
CASE STUDIES -1
Process description, wastewater characteristics and effluent treatment for iron and steel,
thermal power plants, sugar, paper and pulp industry.
(9)
CASE STUDIES - 2
Process description, wastewater characteristics and effluent treatment for tannery,
distilleries, diary and textiles – Dyeing.
(9)
CASE STUDIES - 3
Process description, wastewater characteristics and effluent treatment for oil refineries,
pharmaceutical plants, corn-starch industry and food processing industry.
(9)

TOTAL: 45hours

115
1.
TEXT BOOKS
1. Rao, M.N and Datta, A.K. "Waste Water Treatment", Oxford and IBH Publishers Co, New
Delhi, 1995.
2. Metcalf and Eddy, “Wastewater Engineering Treatment, Disposal and Reuse", McGraw-
Hill Publishing Co, Indian Edition, New Delhi, 2005.

3. Eckenfelder (jr), “Industrial Water Pollution Control", McGraw-Hill Book Co, New York,
2000.
REFERENCE BOOKS
1. Nemerow N. L., "Industrial Water Pollution", Addison - Wesley Publishing Company Inc.,
USA, 1996.
2. Mahajan S. P. "Pollution Control in process industries", Tata McGraw Hill Publishing Co
Ltd., New Delhi, 1989.
3. World Bank Group, “Pollution Prevention and Abatement Handbook - Towards Cleaner
Production”, World Bank and UNEP, Washington D.C., 1998

ONLINE RESOURCES:
1. http://nptel.ac.in/courses/105106119/36#

116
1.
 19CEE27- GEO ENVIRONMENTAL ENGINEERING
ASSESSMENT: THEORY
L T P C
COURSE OUTCOME
On completion of the course, the student is expected to 3 0 0 3
CO1: Understand basic knowledge of concepts and principles of Geo-
environmental Engineering..
CO2: Be capable of selecting site for safe disposal of waste.
CO3: Aware of soil stabilization by utilizing solid waste.
CO4: Assess the contamination in the soil and to select suitable remediation methods based
on contamination.
CO5: Prepare the suitable disposal system for particular waste.

GENERATION OF WASTES AND CONSQUENCES OF SOIL POLLUTION

Introduction to Geo environmental engineering – Environmental cycle – Sources,
production and classification of waste – Causes of soil pollution – Factors governing soil
pollution interaction clay minerals - Failures of foundation due to waste movement.
(9)

SITE SELECTION AND SAFE DISPOSAL OF WASTE

Safe disposal of waste – Site selection for landfills – Characterization of land fill sites and
waste – Risk assessment – Stability of landfills – Current practice of waste disposal –
Monitoring facilities – Passive containment system – Application of geosynthetics in solid
waste management – Rigid or flexible liners.
(9)
TRANSPORT OF CONTAMINANTS
Contaminant transport in sub surface–Advection, Diffusion, Dispersion–Governing
equations –Contaminant transformation – Sorption – Biodegradation – Ion exchange –
Precipitation –Hydrological consideration in land fill design – Ground water pollution
(9)
WASTE STABILIZATION
Stabilization - Solidification of wastes – Micro and macro encapsulation – Absorption,
Adsorption, Precipitation – Detoxification – Mechanism of stabilization – Organic and
inorganic stabilization – Utilization of solid waste for soil improvement
(9)
REMEDIATION OF CONTAMINATED SOILS
Exsitu and insitu remediation - Solidification, bio-remediation, incineration, soil washing,
electro kinetics, soil heating, vetrification , bio-venting.
(9)
TOTAL: 45hours

TEXT BOOKS
1. Manoj Datta,” Waste Disposal in Engineered landfills”, Narosa Publishing House, 1997.
2. Manoj Datta, B.P. Parida, B.K. Guha, “Industrial Solid Waste Management and Landfilling
Practice”, Narosa Publishing House, 1999.

117
1.
REFERENCE BOOKS
1. Hari D. Sharma and Krishna R. Reddy, “Geo-Environmental Engineering” –John Wiley
and Sons, INC, USA, 2004.
2. Daniel B.E., “Geotechnical Practice for waste disposal”, Chapman & Hall, London 1993.
3. Westlake, K, “Landfill Waste pollution and Control”, Albion Publishing Ltd., England,
1995. 4. Wentz, C.A., “Hazardous Waste Management”, McGraw Hill, Singapore, 1989.

Online Resources
https://nptel.ac.in/courses/105/101/105101196/

118
1.
 19CEE28- PAVEMENT ENGINEERING
ASSESSMENT: THEORY
COURSE OUTCOME L T P C
After successful completion of the course, student will be able to
CO1: Describe the principles of rigid and flexible pavements along with 3 0 0 3
their components
CO2 : Design the flexible pavement using IRC, CBR and plate bearing methods
CO3 : Design the rigid pavement using IRC and PCA methods
CO4 : Evaluate the pavements in structural and functional aspects

PRINCIPLES OF PAVEMENT DESIGN

Types of pavement-flexible and rigid- Components of pavement and their functions,
Provisions of IRC Guidelines for each component, Comparison between highway and
airport pavements, Factors influencing pavement stability: Vehicle and traffic factors-ESWL
and Wheel Load Factor- Moisture and climate, soil-CBR, Plate Bearing method for finding
modulus of subgrade reaction stress distribution factor- Boussinesq and Burmister
theories.
(9)
DESIGN OF FLEXIBLE PAVEMENT
Empirical method based on classification-Group Index method- Methods based on
arbitrary strength-CBR method-Provisions of IRC 37- Theoretical and semi-theoretical
methods- Burmister Design method.
(9)
STRESSES AND JOINTS IN RIGID PAVEMENT
Advantages and Disadvantages of rigid pavement, Stresses in rigid pavement due to wheel
load-Westergaard theory – Stresses due to change in temperature-warping stress- Critical
combination of stresses. Types of joints, Types of rigid pavement based on reinforcement,
Design of reinforcement in longitudinal and transverse direction, tie bars and dowel bars.

(9)
DESIGN OF RIGID PAVEMENT
Modulus of Rupture of concrete, Design of airport pavement-Portland Cement Association
method and Corps of Engineers method- Design of rigid highway pavement- IRC 58 method
and PCA method.
(9)
PAVEMENT DISTRESS, EVALUATION AND REHABILITATION
Flexible pavement distress - rigid pavement distress - condition surveys - Types of
roughness - present serviceability index - skid resistance - structural evaluation -
Bituminous and flexible overlays on rigid pavements - Pavement Management System
(9)
TOTAL: 45 Hours
TEXT BOOKS
1. Kadiyali L.R., "Principles and Practice of Highway Engineering", Khanna Tech
Publications, New Delhi, 2004.
2. Sharma S. K," Principles, Practice and Design of Highway Engineering", S. Chand and
Company Ltd., New Delhi, 2014.
119
1.
REFERENCE BOOKS
1. Yoder E. J. and Witezak M. W., "Principles of Pavement Design", John Wiley and Sons Inc.,
New York, 2011.
2. Yang H. Huang, “Pavement Analysis and Design”, Pearson Education, 2008
3. IRC: 37-2018, Guidelines for the Design of Flexible pavements, Indian Road Congress,
New Delhi, 2018.
4. IRC: 58-2015, Guidelines for the Design of Rigid Pavements for Highways, Indian Road
Congress, New Delhi, 2015.
5. IRC: SP: 72 – 2015, Guidelines for the design of flexible pavements of low volume rural
roads, Indian Road Congress, New Delhi, 2015.

ONLINE RESOURCES
1. https://nptel.ac.in/courses/105/104/105104098/
2. https://nptel.ac.in/content/storage2/courses/105101087/downloads/Lec-19.pdf
3. http://www.digimat.in/nptel/courses/video/105105107/L37.html

120
1.
 19CEE29- AIRPORT AND HARBOUR ENFINEERING
ASSESSMENT: THEORY L T P C
COURSE OUTCOME 3 0 0 3
After successful completion of the course, student will be able to
CO1: Identify the parameters required for planning and constructing an airport
CO2: Design the runway and taxiway in airport as per geometrical standards
CO3: Explain the air traffic controls, airfield pavement strength assessment, failures and
maintenance for safe functioning of airport
CO4: Outline the elements and components related to Harbour and Docks

AIRPORT PLANNING
Regional planning - Planning Consideration- Airport Site evaluation - factors affecting
airport location - Surveys - Drawings - Role of ICAO, FAA, DGCA and AAI - Airport capacity -
Terminal area - Building and building area - facilities in terminal area-Vehicular circulation
- Parking area - Apron - Hanger - other components
(9)
GEOMETRIC DESIGN OF RUNWAY AND TAXIWAY
Design of runway - Factors affecting setting - Orientation of Runway - windrose diagram -
number of runways - factors affecting runway length - length of runway - stop ways - clear
ways - take off length requirement - landing length requirement. Design of taxiways,
aprons, holding bays- functional requirement - taxiway- width - curve - junction -
intersection
(9)
AIR TRAFFIC CONTROL AND PAVEMENT MAINTENANCE
Aircraft Characteristics - Future trends in aircrafts design- Visual Aids - Airport Marking -
Airport Lighting - Need for Air traffic control - Air traffic control network - Air traffic
control Aids - ILS - Need for maintenance of pavement - Airfield Pavement failures -
Maintenance - Strengthening of airfield pavements - Drainage - Characteristics and
requirements
(9)
HARBOUR
Definitions: Harbour, port, marine terminal, offshore mooring, anchorage area, turning
basin, length, beam, draft, load line, dead weight tonnage, warehouse, Transit shed -
Planning, site selection - layout of harbours - classification of harbours
(9)
DOCKS
Break water - classification and sections of different types of break waters - Docks -
Classification - Jetty, quay, quay wall - Dolphins - fenders - navigational aids- necessity and
types.
(9)
TOTAL: 45Hours
TEXT BOOKS
1. Khanna .S.K., Arora M.G., and S. S. Jain, "Airport Planning and Design", Nem Chand,
Roorkee, 2017
2. Saxena S. C, “ Airport Engineering Planning and Design”, CBS Publications, 2020

121
1.
3. Hasmukh P. Oza and Gautam H. Oza., "Dock and Harbour Engineering", Charotar
Publishing House, Anand, Gujarat, 2016.
4. S.P. Bindra, “ Dock and Harbour Engineering”, Dhanpar Rai Publishers, 2010

REFERENCE BOOKS

1. Robert Horonjeff., "The Planning and Design of Airports", McGraw Hill Book Co., 1994.
2. Quinn, "Design and Construction of Port and Marine Structures", McGraw Hill, 1972.
3. BIS IS 4651-4, 2014, Code of Practice for Planning and Design of Ports and Harbours,
General Design Consideration, BIS, New Delhi.

ONLINE RESOURCES
1. https://nptel.ac.in/courses/114/106/114106025/
2. https://nptel.ac.in/courses/105/107/105107123/
3. http://www.nptelvideos.in/2012/11/transportation-engineering-ii.html

122
1.
 19CEE30- TRAFFIC ENGINEERING
ASSESSMENT: THEORY
COURSE OUTCOME
After successful completion of the course, student will be able to L T P C
CO1: Understand the traffic parameters and systems 3 0 0 3
CO2: Design Channelized islands, Intersections, signals and parking arrangements
CO3: Develop an effective Traffic management System

TRAFFIC CHARACTERISTICS
Physical, Physiological, Psychological, Environmental Characteristics, PIEV Theory -Traffic
Stream Characteristics, Vehicle Characteristics –Urban Road and Road Characteristics –
Geometric Design- Overview.
(9)
SURVEYS AND STUDIES IN TRAFFIC ENGINEERING
Conventional and Modern Methods of Traffic Survey and Studies – Volume and Capacity –
LOS for uninterrupted traffic flow – Headway concepts and applications – Speed and Delay
– Origin and Destination, Parking, Accident – Level of Service (LoS)
(9)
DESIGN OF TRANSPORT INFRASTRUCTURE
Design of roads – Design Speed, Terrain, Gradient curves – Horizontal and Vertical, Super
elevation, Sight Distance –Traffic Sign, Road Markings, Traffic Control Aids, simple
problems.
(9)
INTERSECTION DESIGN AND CONTROL
Design of Intersection – At grade intersection – Uncontrolled, Channelization, Rotary,
Traffic Signal Control, Signal Co-ordination, Grade Separated Intersection - Types, Design
and Analysis.
(9)
TRAFFIC MANAGEMENT
Area Traffic Management System, Traffic System Management (TSM) with IRC standards,
Traffic Regulatory Measures, Travel Demand Management (TDM), Direct and indirect
methods, Congestion and parking pricing, Intelligent Transport System
(9)
Total: 45 Hours
TEXT BOOKS
1. Kadiyali.L.R. “Traffic Engineering and Transport Planning”, Khanna Publishers,
Delhi, 1999
2. Indian Roads Congress (IRC) Specifications: Guidelines and Special Publications on
Traffic Planning and Management, 2018
3. Salter. R.I and Hounsell N.B, “Highway Traffic Analysis and design”, Macmillan Press
Ltd.1996.

REFERENCES:
1. Wolfgang S. Homburger et.al., „Fundamentals of Traffic Engineering‟ 15th Edition,
Institute of Transportation Studies, University of California, Berkely, 2001

123
1.
 2. James L. Pline (Edr) „Traffic Engineering Hand Book‟, Institute of Transportation
Engineers,
3. Nicholas T.Garber, Lester A Hoel, „Traffic and Highway Engineering‟, Revised
Second Edition, ITP, California, USA, 1999
4. Thomas Curinan, „An Introduction to Traffic Engineering – A Manual for Data
Collection and Analysis, Books Cole, UK, 2001
5. Washington DC, USA, 1999Pignataro, L.J., Traffic Engineering – Theory & Practice,
John Wiley, 1985. 6 AASHTO A Policy on Geometric Design of Highway and Streets
6. Highway Capacity Manual (2000), Transportation Research Board, USA.

ONLINE RESOURCES
1. https://nptel.ac.in/courses/105/101/105101008/
2. https://nptel.ac.in/content/storage2/courses/105101087/downloads/Lec-32.pdf

124
1.
 19CEE31- URBAN TRANSPORTATION PLANNING
ASSESSMENT: THEORY
COURSE OUTCOME L T P C

After successful completion of the course, student will be able to 3 0 0 3

CO1: Design, conduct and administer surveys to provide the data required for
transportation planning.
CO2: Develop and calibrate modal split, trip generation rates for specific types of land use
developments.
CO3: Adopt the steps that are necessary to complete a long-term transportation plan.

UNIT I PRINCIPLES OF TRANSPORTATION PLANNING

Introduction - Interdependence of land use and traffic – transportation planning – different
stages – various surveys – difficulties in planning - Collection of data – Organisation of
surveys and Analysis, Study Area, Zoning, Types and Sources of Data, Road Side Interviews,
Home Interview Surveys, Commercial Vehicle Surveys, Sampling Techniques
(10)
UNIT II TRIP GENERATION AND DISTRIBUTION
Purpose of Trip – Trip Generation – Trip Distribution – factors – various models – analysis
– traffic assignment – modal split - simple problems
(10)
UNIT III DESIGN OF VARIOUS ELEMENTS
Design of intersections – at grade – grade separated interchanges – Parking – Demand –
type of parking – Design of Multi Storied and Surface Parking facility - traffic signal design –
methods – simple problems
(10)
UNIT IV URBAN TRANSPORTATION MODES
Public transport – planning - fares and subsidy – Intermediate public transport – types –
characteristics – other urban transportation modes
(6)
UNIT V URBAN TRANSPORTATION PROBLEMS
Problems in Present Traffic conditions –– traffic and Environment – Air Pollution – Noise
Pollution - fuel crisis – remedial measures (9)

TOTAL: 45 Hours

125
1.
TEXT BOOKS
1. Kadiyali.L.R. “Traffic Engineering and Transport Planning”, Khanna Publishers, Delhi,
1999
2. Hutchinson, B.G, ‘Principles of Urban Transport Planning”, McGraw Hill. 1974
3. Khisty C.J. and Kent B Lall, ‘Transportation Engineering’ Prentice Hall. 2017
4. Papacostas,‘ Transportation Engineering and planning’, Tata McGraw Hill, 2015
REFERENCE BOOKS
1. Mayer M and Miller E, ‘Urban Transportation Planning: A decision oriented Approach’,
McGraw Hill.
2. Bruton M.J., ‘Introduction to Transportation Planning’, Hutchinson of London.
3. Dicky, J.W., ‘Metropolitan Transportation Planning’, Tata McGraw Hill.

ONLINE RESOURCES
1. https://nptel.ac.in/courses/105/107/105107067/
2. https://nptel.ac.in/courses/105/106/105106058/
3. https://nptel.ac.in/courses/124/105/124105016/
4. http://www.nptelvideos.in/2012/11/urban-transportation-planning.html

126
1.
 19CEE32 INTELLIGENT TRANSPORT SYSTEM
ASSESSMENT : THEORY
COURSE OUTCOME L T P C
After successful completion of the course, student will be able to 3 0 0 3
CO1: Understand the concepts and need for Intelligent Transport Systems.
CO2: Acquire the basic knowledge on data collection using ITS.
CO3: incorporate the knowledge of management and automation of traffic systems
CO4: Apply the concepts of ITS in the field of Transportation planning

INTRODUCTION TO ITS
Introduction to Intelligent Transport System (ITS) – Definition of ITS and Identification of
ITS- Need for ITS, Objectives, Historical Background, Benefits of ITS
(9)
DATA COLLECTION TECHNIQUES
ITS Data collection techniques – Detectors, Automatic Vehicle Location (AVL), Automatic
Vehicle Identification (AVI), Geographic Information Systems (GIS), video data collection
(9)
FUNCTIONAL AREAS
Telecommunication in ITS - functional areas of ITS – Advanced Traffic Management
Systems (ATMS), Advanced Traveler Information Systems (ATIS), Commercial Vehicle
Operations (CVO), Advanced Vehicle Control Systems (AVCS), Advanced Public
Transportation Systems (APTS), Advanced Rural Transportation Systems (ARTS)
(10)
TRAFFIC MANAGEMENT AND AUTOMATION
ITS User Needs and Services – Travel and Traffic management, Public Transportation
Management, Electronic Payment, Commercial Vehicle Operations, Emergency
Management, Advanced Vehicle safety systems, Information Management, Mobile
Applications; Automated Highway Systems - Overview of ITS implementations in
developed countries, ITS in developing countries.
(10)
ITS in Indian Cities
Incorporation of ITS technologies in Indian cities – Transportation Planning applications –
Metro rail systems – user friendly apps – case studies
(7)

TOTAL : 45 Hours
TEXT BOOKS
1. Srinivasa R Kumar ‘Intelligent Transport Systems’, Orient Blackswan Pvt Ltd, 2021
2. Pradip Kumar Sarkar & Amit Kumar Jain ‘Intelligent Transport Systems’, PHI Learning,
2018
3. Dr. L. R. Kadiyali ‘Traffic Engineering and Transport Planning’, Khanna Publishers, 2012

REFERENCE BOOKS
1. ITS Hand Book 2000: Recommendations for World Road Association (PIARC) by Kan
Paul Chen, John Miles

127
1.
NPTEL - ONLINE RESOURCES

1. https://nptel.ac.in/courses/105/101/105101008/
2. https://nptel.ac.in/content/storage2/courses/105101087/downloads/Lec-32.pdf
3. National ITS Architecture Documentation, US Department of Transportation, 2007
(CD-ROM).

128
1.
 19CEE33 - HYDRAULIC STRUCTURES
ASSESSMENT: THEORY L T P C
COURSE OUTCOME 3 0 0 3
After successful completion of the course, student will be able to
CO1: Select the hydraulic structure based on its purpose, location, function and materials
used.
CO2: Explain the principles of design of a weir as a part of diversion headwork.
CO3: Demonstrate the procedure for the design of canal structures.
CO4: Develop the procedure for stability analysis and design of rigid and non rigid dams
based on Geological and hydrological data.
CO5: Illustrate the constructional features and the method of operation and maintenance
of irrigation tanks.
RIVER STRUCTURES
Diversion Head Works – Brief description of component tparts - their functions –Design
principles - Seepage Theories - Weir, Barrage and impervious floor as a part of diversion
head work and their design based on seepage theories - River training works-types
(Theoretical aspects only)
(9)
CANAL STRUCTURES
Canal regulators – Types – Functions – Parts of a regulator – Canal falls – Types –Brief
Description – design aspects of notch - type canal fall – Cross Drainage works – Types –
selection –Design aspects of siphon aqueducts – Canal outlets and fumes (Theoretical
aspects only)
(9)
STORAGE STRUCTURES - GRAVITY DAMS
Gravity Dams – Description – Forcesacting – Elementary and Practical profile –Design
(procedure only) of high and low gravity dam- Zoning of gravity dam – Galleries – Types -
Joints, Water stops and Key ways – Types – Spillways – Types - Functions.
(9)
STORAGE STRUCTURES - EARTHEN DAMS
Earthdams – Various types of sections – Cross –sectional Details –Design data of
components –Causes of failure –Typical cross sections to suit site conditions and available
materials-Phreatic line- Determination by graphical method – Seepage control in earthen
dams.
(9)
OTHER STORAGE STRUCTURES
Arch Dams - Types (Description only) - Buttress dams - Types (Description only). Tanks –
Classification – Components of tanks - Types of bunds - Design aspects of bunds-Tank
129
1.
surplus weir - tower head sluice- wing wall type sluice (Description only)-Tank
regulation arrangements.
(9)
TOTAL: 45 Hours
TEXT BOOK
1 .GargS.K , "Irrigation Engineering and Hydraulic Structures ",Khanna Publishers ,New
Delhi ,2009.

REFERENCE BOOKS
1. Punmia B.C, Pande,B.B. Lal., "Irrigation and Water Power Engineering", Laxmi
Publications, New Delhi,2009.
2. Sahasra BudheS.R. ,"Irrigation Engineering and Hydraulic Structures Including
Hydrology and Water Power Engineering", S.K.Kataria Publications, Sixth Edition,
1996(Reprint2000).

Online Resources
1. https://nptel.ac.in/courses/105/105/105105110/

130
1.
 19CEE 34- ENGINEERING HYDROLOGY
ASSESSMENT: THEORY L T P C
3 0 0 3
COURSE OUTCOME
At the end of this course, the student will be able to
CO1:Summarize the factors governing the movement of water through atmosphere,
lithosphere and hydrosphere
CO2: Collect, analyse and interpret the rainfall data over a basin
CO3: Estimate the precipitation losses occurring due to evaporation, transpiration and
infiltration
CO4: Determine the flow in a river resulting from a storm of given duration through
rainfall-runoff models
CO5: Estimate the flood in a stream through flood routing techniques
GENERAL HYDROLOGY
Hydrology – definition –development – hydrologic design – hydrologic failure - weather-
general circulation –water shed hydrology –geomorphology –effect ofl and use in
hydrology.
(9)
PRECIPITATION
Precipitation – Types of precipitation – forms of precipitation – rainfall measurement –
gauges –recorders – processing precipitation data –check for consistency – supply of
missing data-areal mean- mass curve technique – intensity duration, frequency curves.
(9)
EVAPORATION AND INFILTRATION
Process of evaporation, transpiration, infiltration - factors affecting evaporation and
infiltration- measurement of evaporation and infiltration – Infiltration indices.
(9)
RUN-OFF
Factors affecting runoff – Rainfall – Runoff process – hydrograph theory and its
applications-hydrograph components - hydrograph separation – unit hydrograph and its
derivation-synthetic hydrograph – Scurve Technique
(9)
FLOOD AND STREAM FLOW MEASUREMENTS
Flood estimation – flood routing through reservoir (ISD method)-routing through
channels (Muskingham method)- flood control- flood forecasting .Stream flow
measurements - methods-Stage Discharge Relation –Stream gauging Network.

(9)
TOTAL: 45 Hours
TEXT BOOKS
1. Raghunath H.M.,"Hydrology :Principles, Analysis and Design", New Age
International (Pvt.) Ltd., NewDelhi, 2nd Revised Edition2007
2. Raghunath H.M., "GroundWater" ,New Age International (P)Ltd. ,NewDelhi, 2nd
Edition, Reprint2003
131
1.
REFERENCE BOOKS
1. Jayarami Reddy P.," A Text Book of Hydrology "University Science Press, (Unit of
Laxmi Publications ) NewDelhi, 3rd Edition,2011
2. David Keith Todd and Larry W.Mays," Ground Water Hydrology" John Wiley
Publications, 3rd Edition, 2005
3. Subramanya K., "Engineering Hydrology", TataMc GrawHill Publishing Company
Ltd.,2000
4. Chow V.T.," Applied Hydrology",Tata McGraw Hill Publishing Company Ltd.,1988

Online Resources
1. https://nptel.ac.in/courses/105/101/105101002/

2. https://nptel.ac.in/courses/105/107/105107129/

132
1.
 19CEE35- VALUATION OF IMMOVABLE PROPERTIES
ASSESSMENT: THEORY
COURSE OUTCOME
After successful completion of the course, student will be able to L T P C
CO1: Value different types of land used for construction of buildings. 3 0 0 3
CO2: Value different types of buildings.
CO3: Apply appropriate method for valuation specific to the purpose.

PRINCIPLES OF VALUATION AND VALUATION OF LAND & BUILDING

Definition - Cost, Price and Value - Types of Properties under Valuation - Various Purposes
of Valuation - Different types of Value - Factors affecting Value - Different Methods of
Valuation.
Types of Land - Location of Land and its Value - Belting Method of Valuation - Market Value
and Guideline Value of Land - Building FSI - Plot Coverage - Types of Structure - Life of
Various types of Building - Methods of Calculating Depreciation - Valuation by Land and
Building Method.
(9)
FREE HOLD AND LEASE HOLD PROPERTIES AND FIXATION OF FAIR RENT
Free hold and Lease hold Properties - Lease, Rent and License - Different forms of Lease -
Lessor - Lessee - Sub-lessee - Reversion - Lessor' Rights - Lessee's Rights - Meaning of
Different Rents - Fixation of Fair Rent - Principles of fixation of fair rent-Amenities to be
considered - Rent fixation for Residential & Non-Residential purposes, Commercial
Buildings, Apartments
(9)
VALUATION OF APARTMENTS
FSI - Super Built-up Area - Undivided Share of Land - Different Methods of Valuation -
Procedure of Valuation by Composite Rate Method - Valuation by Other Methods -
Procedure for Valuation of Flat under Construction - Stage Value of a flat - Valuation of an
existing flat - Joint Venture Agreement
(9)
VALUATION FOR BANKS
Purposes - Security - Primary and Collateral - Present, Market, Forced Sale and Auction
Value - Valuation of Building under Construction - Valuation of Ready Built House -
Valuation of Ready built Flats - Valuation of Flats under construction - Valuation of
Properties offered as Collateral Security - How to become a Panel Valuer of Banks -
Problems involved in Bank Valuation - Precautions to be taken in Bank Valuation - Points to
be remembered in Bank valuation.
(9)
VALUATION FOR TAXATION
Direct and Indirect Taxes - Valuation for Income Tax - Estimation of Cost of Construction by
Plinth area rate method - Valuation by CPWD and State PWD Rates - Cost of Construction
by accounting method - Valuation for Capital Gains Tax - Fair Market Value as on
01.04.1981 and 01.04.2001 - Section 50C of Income Tax Act - Valuation for individual
Property - Valuation of Apartment
(9)
TOTAL: 45 Hours
133
1.
REFERENCE BOOKS
1. Kanagasabapathy B., "Practical Valuation", Volumes I - X, No 1, Prestige Flats,
Reynolds Road, Trichy.
2. Ashok Nain, "Principles of Valuation", Tata McGraw Hill Publishing House, July 2010.
3. Roshan H. Namavati, "Theory and Practice of Valuation", Lakhani Book Depot,
Mumbai, 2009.
4. Banerjee D. N., "Principles and Practice of Valuation", J.A. Parks, Eastern Law House,
Delhi 5th Edition, 1998.

134
1.
 19CEE36- ENGINEERING ECONOMICS
ASSESSMENT: THEORY L T P C
COURSE OUTCOME 3 0 0 3
Upon successful completion of this course, student will be able to
CO1: Recognize the fundamental economic concepts applicable to engineering.
CO2: Select appropriate techniques of incorporating inflation factor in economic
decision making.
CO3: Apply the basics of economics and cost analysis to engineering.
CO4: Identify economically sound decisions.

INTRODUCTION TO ECONOMICS
Introduction to Economics- Flow in an economy, Law of supply and demand, Macro
economics and micro economics - Concept of Engineering Economics - Engineering
efficiency, Economic efficiency, Scope of engineering economics - Element of costs,
Marginal cost, Marginal Revenue, Sunk cost, Opportunity cost, Break-even analysis - V
ratio, Elementary economic Analysis - Material selection for product - Design
selection for a product, Process planning.
(9)

VALUE ENGINEERING
Make or buy decision, Value engineering - Function, aims, Value engineering procedure.
Interest formulae and their applications-Time value of money, Single payment
compound amount factor, Single payment present worth factor, Equal payment series
sinking fund factor, Equal payment series payment Present worth factor- equal payment
series capital recovery factor - Uniform gradient series annual equivalent factor,
Effective interest rate, Examples in all the methods.
(9)
CASH FLOW
Methods of comparison of alternatives - present worth method (Revenue dominated
cash flow diagram), Future worth method (Revenue dominated cash flow diagram, cost
dominated cash flow diagram), Annual equivalent method (Revenue dominated cash
flow diagram, cost dominated cash flow diagram), rate of return method, Examples in
all the methods.
(9)

REPLACEMENT AND MAINTENANCE ANALYSIS

Replacement and Maintenance analysis - Types of maintenance, types of replacement
problem, determination of economic life of an asset, Replacement of an asset with a

135
1.
new asset - capital recovery with return and concept of challenger and defender,
Simple probabilistic model for items which fail completely.
(9)

DEPRECIATION
Depreciation- Introduction, Straight line method of depreciation, declining balance
method of depreciation-Sum of the years digits method of depreciation, sinking fund
method of depreciation/ Annuity method of depreciation, service output method of
depreciation-Evaluation of public alternatives- introduction, Examples, Inflation
adjusted decisions - procedure to adjust inflation, Examples on comparison of
alternatives and determination of economic life of asset.
(9)
TOTAL: 45 Hours

TEXT BOOKS
1. PanneerSelvam, R, "Engineering Economics", Prentice Hall of India Ltd, New Delhi,
2001.
2. Khanka S.S., "Entrepreneurial Development", S.Chand & Co. Ltd, New Delhi, 1999.
3. Hisrich R. D. and Peters M. P., "Entrepreneurship", 5th Edition, Tata McGraw-Hill,
2002.
4. Naidu N.V.R., "Management of Entrepreneurship", I.K. International Pvt Ltd., New
Delhi.

REFERENCE BOOKS
1. Chan S. Park, "Contemporary Engineering Economics", Prentice Hall of India, 2011.
2. Donald G. Newman, Jerome P. Lavelle, "Engineering Economics and Analysis," Engg.
Press, Texas, 2010.
3. Degarmo E.P., Sullivan W.G and Canada J.R., "Engineering Economy", Macmillan,
New York, 2011.
4. Zahid A khan, "Engineering Economy", Dorling Kindersley, 2012.
5. Rabindra N. Kanungo, "Entrepreneurship and innovation", Sage Publications, New
Delhi, 1998.
ONLINE RESOURCES:
1. NPTEL Course: https://nptel.ac.in/courses/112/107/112107209/

136
1.
 19CEE37- MAINTENANCE AND REHABILITATION OF STRUCTURES
ASSESSMENT: THEORY
COURSE OUTCOME: L T P C
On completion of the course the students will be able to 3 0 0 3
CO1: Assess the strength and quality of existing concrete structures by NDT
CO2: Evaluate the damages in concrete structure due to climate, temperature, chemicals,
corrosion.
CO3: Plan and Suggest suitable repair materials and techniques for repairing of distressed
concrete structures.
CO4: Dismantle and demolish structures which cannot be repaired in an environment friendly,
with maximum saving of materials and in a safe way.
SERVICEABILITY AND DURABILITY OF CONCRETE
Quality assurance for concrete construction - concrete preparation - strength, permeability,
thermal properties, cracks - effects due to climate, temperature, chemicals, corrosion –
construction errors - strength evaluation of existing structures by NDT (Rebound Hammer Test,
Ultrasonic Pulse Velocity Test).
(9)
MAINTENANCE AND REPAIR STRATEGIES
Maintenance, Repair and Rehabilitation, facets of maintenance, importance of maintenance -
various aspects of inspection, Assessment procedure for evaluating a damaged structures,
causes of deterioration.
(9)
CRACKS
Cracks in concrete - intrinsic cracking and structural cracking - causes and remedies - plastic
cracks and remedies – Thermal contraction cracks - Long term drying shrinkage cracks -
Sulphate attack cracks - Alkali aggregate reaction cracks.
(9)
MATERIALS FOR REPAIR
Material for Repair: Concrete chemicals, special elements for accelerated strength gain -
Expansive cement - Polymer concrete - Sulphur infiltrated concrete - Ferro cement - Fibre
reinforced concrete.
(9)
REPAIR AND DEMOLISION TECHNIQUES
Repair techniques: Rust eliminators and polymer coating for steel bars during repairs - formed
concrete, mortar and dry pack - Vacuum concrete - Gunite, shotcrete and Grouting - Epoxy
injection - Mortar repair for cracks - shoring and under pinning.
Demolition Techniques: Engineered demolition techniques for dilapidated structures - Case
studies.
(9)
TOTAL: 45 Hours

137
1.
TEXTBOOKS:
1. Varghese.P.C Maintenance Repair and Rehabilitation and Minor works of building,
Prentice Hall India Pvt Ltd 2014.
2. Denison Campbell, Allen and Harold Roper, “Concrete Structures, Materials, Maintenance
and Repair”, Longman Scientific and Technical UK, 1991.
3. Vidivelli.B Rehabilitation of Concrete Structures Standard Publishes Distribution.1st
edition 2009.

REFERENCES:
1. Dodge Woodson.R Concrete Structures, Protection, Repair and Rehabilitation,
Butterworth- Heinemann, Elsevier, New Delhi 2012
2. Allen R.T. & Edwards S.C, Repair of Concrete Structures, Blakie and Sons, UK, 1987
3. Shetty M.S. Concrete Technology-Theory and Practice, S.Chand and Company, 2008.
4. Dov Kominetzky.M.S., “Design and Construction Failures”, Galgotia Publications Pvt. Ltd.,
2001
5. Ravishankar.K., Krishnamoorthy.T.S, “Structural Health Monitoring, Repair and
Rehabilitation of Concrete Structures”, Allied Publishers, 2004.
6. CPWD and Indian Buildings Congress, Hand book on Seismic Retrofit of
Buildings, Narosa Publishers, 2008.
7. Gambhir. M. L., “Concrete Technology”, McGraw Hill, 2013
8. SP:25 Causes, Prevention and Remedies of Cracks in Building and National Building Code
of India 2016

ONLINE RESOURCES:
1. http://www.cpwd.gov.in/Units/handbook.pdf
2. https://nptel.ac.in/courses/105/106/105106202/
3. https://nptel.ac.in/courses/105104030/

138
1.
 19CEE38- ADVANCED CONSTRUCTION TECHNOLOGY

ASSESSMENT: THEORY L T P C
3 0 0 3
COURSE OUTCOME
At the end of this course, the student will be able to:
CO1: Demonstrate the advanced construction techniques for sub structure and super structure
CO2: Identify suitable underground construction technique for a given soil strata
CO3: Discuss the methods, equipments and features involved in offshore construction.
CO4: Explain the methods and techniques of Long span bridge construction.
CO : Express the basic aspects and stages of precast and prefabrication construction
SPECIALIZED CONSTRCTION TECHNIQUES
Construction aspects and procedures of specialized construction techniques - Box pushing -Box
type retaining walls - Slip form for Chimney and Silo construction - Sheet piling and Diaphragm
walls - Well and Caisson - Underpinning - Shotcreting & Guniting - Vacuum dewatering –
Finishing & Curing method (9)
UNDERGROUND CONSTRUCTION
Site investigation and Geological studies - Drilling - Pneumatic breakers - Explosives - Blasting.
Tunneling technology- Mechanized shield- Micro method- Cut and cover method-Pipe Jacking -
Hazards and safety measures in underground construction. (9)
OFFSHORE CONSTRUCTION
Underwater construction - Stages of offshore structure, Construction, Facilities and Methods of
fabrication- Equipments- Crane barges derrick barges - Drilling vessels (9)
BRIDGE CONSTRUCTION TECHNIQUES
Types of Bridge- Based on span- Material- Type of super structure- Support condition -Position
of floor -High flood level- Bridge construction methods – In situ and Precast construction
methods- Balanced cantilever methods - Span by span method - Incremental launching
method. (9)
PRE-CAST AND PRE-FABRICATION CONSTRUCTION
Planning, Analysis and Design considerations for Precast and Prefabrication constructions -
Materials, Moulds and Modular Coordination, Standardization - Precast systems - Joints in
Precast constructions- Curing techniques- Handling- Transportation and Erection techniques -
Fabrication and Erection of Steel Structural Elements. Case study – Precast and prefabricating
technology for Low c ost and Mass Housing Schemes. (9)

TOTAL: 45 Hours

139
1.
TEXT BOOKS
1. Roy Chudley and Roger Greeno, "Advanced Construction Techniques," Pearson Prentice
Hall, 2006.
2. Beer, G., "Technology Innovation in Underground construction", CRC Press, 2009.
3. Gerwick, B., "Construction of marine and offshore structures", CRC Press, 2007.

REFERENCE BOOKS
1. Levitt, "Precast concrete - Materials, manufacture properties and usage", Taylor & Francis,
2007.
2. Hurd M. K., "Formwork for concrete", American Concrete Institute, Detroit, 1995.
3. Chew Yit Lin, Michael, "Construction Technology for Tall Buildings", Singapore University
Press, World Scientific Publishing company, 2009.
4. Richardson, J.G., "Pre-cast concrete Production", Cement and Concrete Association, 1973.

140
1.
 19CEE39- CONTRACT MANAGEMENT
ASSESSMENT: THEORY
COURSE OUTCOME L T P C
After successful completion of the course, students will be able to
3 0 0 3
CO1: Recognize, Explain & Relate to Contract Types and Identify
where/when Administered.
CO2: Employ the procedure for contractor’s selection through tendering process.
CO3: Indicate Best Choice & Apply Construction Contracting Practices Used at Industry-
Level.
CO4: Proactively identify construction contract conflicts and resolve through arbitrations
and legal procedures.
CO5: Assess the impact of labor regulations and their impact on managing contracts.

CONSTRUCTION CONTRACTS
Elements of Contracts – Types of Contracts – Features – Suitability – Salient Features of
Indian contract Act 1872 as Relevant to Construction Contracts – Design of Contract
Documents – International Contract Document – Standard Contract Document – Law of
Torts– Contract for Engineering and Architectural Services– Contract between Owner and
Contractor.
(9)
TENDERS
Types of Tenders – Notice Inviting Tender – Prequalification – Preparation and Submission
of –Bid Documents & Tenders – Bidding – Acceptance/Rejection of Tenders – Evaluation of
Tender from Technical, Contractual and Commercial Points of View – Contract Formation
and Interpretation – Potential Contractual Problems – World Bank Procedures and
Guidelines – Tamilnadu Transparency in Tenders Act – Local and International Competitive
Bidding – Global Tendering.
(9)
CONTRACT ADMINISTRATION AND MANAGEMENT
Selection of Project Management Team – Possession of Construction Site – Duties of
Employers – Duties of Contractors – Selection of Sub-contractors – Handling of Contract
Matters – Settlement of Variations & Clarifications in Construction – Documentation and
Maintenance of Construction Progress Records – Field Diary –Maintenance of Feed Back
Reports and Documentation – Quality control Inspection Reports and Outcomes.
(9)
ALTERNATE DISPUTE RESOLUTION
Claims and Disputes in Construction contracts – Various Methods of Settlement of Disputes
– Alternate Dispute Resolution – Negotiation, Mediation, Conciliation and Arbitration –
Salient Features of The Arbitration and Conciliation Act 1996 – Formation of Arbitration
Tribunal – Interim Award – Conduct of Arbitration Proceedings – Award Writing and
Setting aside of Award.
(9)
141
1.
LEGAL REQUIREMENTS IN CONSTRUCTION INDUSTRY
Insurance and Bonding – Tax Laws – Income Tax, Sales Tax, Excise and Custom Duties and
their Influence on Construction Costs – Legal Requirements for Planning – Property Law –
Agency Law – Local Government Laws for Approval – Statutory Regulations – Social
Security – Welfare Legislation – Laws relating to Wages, Bonus and Industrial Disputes,
Labour Administration – Insurance and Safety Regulations – Workmen’s Compensation Act
– Indian Factory Act – Tamilnadu Factory Act – Child Labour Act - Other Labour Laws.
(9)
TOTAL : 45Hours

TEXT BOOKS
1. Jimmie Hinze, Construction Contracts, McGraw Hill, 2001
2. B. S. Ramaswamy, Contracts and Their Management, LexisNexis Butterworths, 2005
3. Gajaria G.T., Laws Relating to Building and Engineering Contracts in India,
M.M.Tripathi Private Ltd., Bombay, 1982

REFERENCE BOOKS
1. Gajaria G.T., Laws Relating to Building and Engineering Contracts in India, M.M.Tripathi
Private Ltd., Bombay, 1982
2. Jimmie Hinze, Construction Contracts, McGraw Hill, 2001
3. Joseph T. Bockrath, Contracts and the Legal Environment for Engineers and Architects,
McGraw Hill, 2000.
4. Kwaku, A., Tenah, P.E. Jose M.Guevara, P.E., Fundamentals of Construction
Management and Organisation, Printice Hall, 1985.
5. Patil. B.S, Civil Engineering Contracts and Estimates, Universities Press (India) Private
Limited, 2006.

ONLINE RESOURCES
1. https://nptel.ac.in/courses/105/103/105103093

142
1.
 19CEE40- CONSTRUCTION EQUIPMENTS AND TECHNIQUES
ASSESSMENT: THEORY L T P C
COURSE OUTCOMES: 3 0 0 3
After successful completion of the course, student will be able to
CO1: Apply engineering fundamentals and analysis to the planning, selection, utilization of
earthwork and material handling equipment.
CO2: Describe Concreting and aggregate production equipment, its application and
utilization.
CO3: Demonstrate various Equipment for Construction and Rehabilitation works.
CO4: Identify Sub-structure construction techniques and explain their utilization in
Construction Industry.
CO5: Apply appropriate techniques for the construction of Super-structures.
EARTHWORK AND MATERIAL HANDLING EQUIPMENTS
Importance of construction equipments their classification, selection and contribution rate
of production (Output), Owning and operating cost.
Fundamentals of earth work operations - Selection of equipment for earth work- Types of
earth work equipment – Tractors, Motor graders, Scrapers , Front end waders, Earth
movers. Material handling equipment – Forklifts and related equipment – conveyors-
hauling equipment.
(9)
EQUIPMENTS FOR AGGREGATE PRODUCTION AND CONCRETING Crushers-
Feeders- screening equipment – handling equipment- batching and mixing equipment-
hauling, pouring and pumping equipment, RMC equipment.
(9)
OTHER CONSTRUCTION EQUIPMENTS
Equipment for Foundation, Pile driving equipment, micropiling – Equipment for
compaction, Equipment for dewatering and grouting. Equipment for Demolition.
Rehabilitation techniques.
(9)
SUBSTRUCTURE CONSTRUCTION
Techniques for box jacking, pipe jacking, diaphragm wall construction – piling techniques –
driving well and caisson – cofferdam – sheet piles – dewatering and stand by plant
equipment for underground open excavation.
(9)
SUPERSTRUCTURE CONSTRUCTION
Vacuum dewatering for concrete flooring - Techniques for continuous concreting
operations – Concrete paving technology – Erection techniques of tall structures – pre
stressing in high rise structures. Launching girders, bridge decks – Eco buildings and Green
building concept – Natural buildings – Passive buildings – Intelligent (smart) buildings –
Building automation – Energy efficient buildings for various zones
(9)
Total: 45 Hours
TEXT BOOKS:
1. Sharma S.C. “Construction Equipment and Management”, Khanna Publishers New
Delhi, 2017.
143
1.
 2. Peurifoy, R.L., Ledbetter, W.B. and Schexnayder, C., “Construction Planning,
Equipment and Methods”, 9th Edition, McGraw Hill, 2018.
3. Arora S.P. and Bindra S.P., “Building Construction, Planning Techniques and Method
of Construction”, Dhanpat Rai and Sons, 2010.
4. Deodhar, S.V. “Construction Equipment and Job Planning”, Khanna Publishers, New
Delhi, 2012.
5. Varghese, P.C Building construction, Prentice Hall of India Pvt. Ltd., New Delhi.
6. Dr. Mahesh Varma, “Construction Equipment and its Planning and
Application”, Metropolitan Book Company, New Delhi, 2005.

REFERENCE BOOKS:
1. Rangwala, S.C., “Construction of Structures and Management of Works”, 5th edition,
Charotar publishers , 2005
2. Sankar, S.K. and Saraswati, S., Construction Technology, Oxford University Press,
New Delhi, 2008.
3. “Construction Equipment Management” by John Schaufelberger.

144
1.
 19CEE41- FORMWORK FOR CONCRETE STRUCTURES
ASSESSMENT: THEORY
COURSE OUTCOME L T P C
After successful completion of the course, students will be able to
3 0 0 3
CO1: Recognize the correlation of the structural design and construction of
scaffolding, formwork and shoring.
CO2: Apply economy and safety principles and considerations in formwork design.
CO3: Gain engineering judgment on formwork materials and their allowable stresses.
CO4: Apply formwork analysis and design, erect and inspect formwork, scaffolding and
shoring in construction projects.
CO5: Identify and assess the criteria and requirements for erecting and stripping of
formwork and false-work structures and thereby assess constructability and structural
safety.

PLANNING, SITE EQUIPMENT & PLANT FOR FORM WORK

Introduction – Formwork as a temporary structure – Requirements for formwork –
classification of formwork- Key areas of cost reduction of formwork – Economical planning
of form materials- Planning for Safety - Overall Planning - Detailed planning - Standard
units - Corner units - Pass units - Calculation of labour constants - Formwork hours -
Labour Requirement - Overall programme - Detailed programme - Costing - Planning crane
arrangements - Site layout plan – Transporting plant
(9)
MATERIALS, ACCESSORIES, PROPRIETARY PRODUCTS & PRESSURES
Lumber - Types - Finish - Sheathing boards working stresses - Repetitive member stress -
Plywood - Types and grades - Jointing Boarding - Textured surfaces and strength -
Reconstituted wood - Steel - Aluminum - Hardware and fasteners - Nails in Plywood -
Allowable withdrawal load and lateral load. Pressures on formwork - Examples - Vertical
loads for design of slab forms - Uplift on shores - Laterals loads on columns and walls.
(9)
DESIGN OF FORMS AND SHORES
Basic simplification - Beam formulae - Allowable stresses - Deflection, Bending - Lateral
stability - Shear, Bearing - Design of Wall forms - Slab forms - Beam forms - Column forms -
Examples in each. Simple wood stresses - Slenderness ratio - Slab props - Heavy Duty
props.
(9)
BUILDING AND ERECTING THE FORM WORK
Carpentry Shop and job mill - Forms for Footings - Wall footings - Column footings - Sloped
footing forms - Strap footing - Stepped footing - Slab form systems – Flying system forms-
Prefabricated panel systems –Giant forms- curved wall forms- Beam or girder forms –
suspended forms. Various causes of failures - ACI - Design deficiencies - Permitted and
gradual irregularities.
(9)
FORMS FOR DOMES AND TUNNELS, SLIP FORMS AND SCAFFOLDS
Formwork for domes - Tunnel forming components - Curb forms invert forms - Arch forms
- Concrete placement methods - Cut and cover construction - Bulk head method -
145
1.
Continuous Advancing Slope method. Slip Forms - Principles -Types - advantages -
Functions of various components - Safety in slip forms special structures built with slip
form Technique - Types of scaffolds – timber scaffolds, metal scaffolds and some
proprietary scaffolds – possible causes for collapse of scaffold systems.
(9)
TOTAL: 45Hours

TEXT BOOKS
1. Kumar Neeraj Jha., Formwork for concrete structures, McGraw Hill Education (India)
Private Limited, New Delhi,2017.
2. Hurd, M.K., Formwork for Concrete, Special Publication No.4, American Concrete
Institute, Detroit, 1996.
REFERENCE BOOKS
1. Austin, C.K., Formwork for Concrete, Cleaver -Hume Press Ltd., London, 1996.
2. Michael P. Hurst, Construction Press, London and New York, 2003.
3. Robert L. Peurifoy and Garold D. Oberlender, Formwork For Concrete Structures,
McGraw Hill , 1996.
ONLINE RESOURCES

1. https://nptel.ac.in/courses/105/104/105104030/

146
1.
 19CEE42 - ENTREPRENEURSHIP IN CIVIL ENGINEERING
ASSESSMENT: THEORY
COURSE OUTCOME L T P C
At the end of this course, the student will be able to 3 0 0 3
CO1: Define the concepts of entrepreneurship and analyze the business
environment in order to identify business opportunities
CO2: Define the industrial enterprises and identify the elements of success of
entrepreneurial ventures
CO3: Explain the basic structure and key rules of business taxation law
CO4: Demonstrate knowledge of the legal and ethical environment impacting business
CO5: Define the banking financial services, auditing and insurance for enterprises and
consider the legal and financial conditions for starting a business venture

CONCEPT OF ENTREPRENEURSHIP
Entrepreneur- Qualities of an Entrepreneur - Functions of Entrepreneurs -Classification of
Entrepreneurs -Entrepreneurship - Meaning - Factors influencing Entrepreneurship –
Intrapreneurship -Corporate Entrepreneurship/Intrapreneurship- Entrepreneurial
Organizations and Strategic Management- Innovation and Entrepreneurial Marketing-
Managerial Competencies as an Entrepreneurial Manager- Business idea generation
techniques - Identification of Business opportunities - Feasibility study - Preparation of
Project Report - Tools of Appraisal.
(9)
INDUSTRIAL ENTERPRISES
Classification of industries - large, Micro, Small and Medium small (MSME), heavy, light,
private, public, joint cooperative sector, multinational, cottage, tiny, village, ancillary, basic,
capital intensive, labour intensive industries. Institution for the development of small scale
industries - NSIC, SIDCO, SIDO, SISI, TANSI, DIC, Concessions, rebates, incentives and
subsidies to small scale units- All India Financial Institutions -Commercial Banks - Startup
India, Stand Up India, Mudra Loan - Industrial Estates-Special Economic Zones(SEZ)-Export
Oriented Units(EOU) Procedures in setting of small scale units - Licensing - Registration -
Financing - Working
(9)
BUSINESS TAXATION
Direct and indirect taxes-Income Tax- Income Tax Act 1961 - Basic Concepts and
Definitions - Income, Assessee, Person, Previous Year, Assessment Year, Gross Total
Income, Total Income. Meaning of Permanent Account Number, Return of Income, TDS,
Advance Tax, Rates of Taxation, Assessment Procedure. Service Tax-Customs Duty, Excise
Duty -Goods And Services Tax (GST)-Definitions- computations- Deductions-exemptions--
Registration of an Assessee- Payment of Tax- Furnishing of Return- Interest as Delayed
Payment of Tax- Punishments/ Penalties Relating to Taxes- Appeal before the respective
Commissioners- Appeal before Appellate Tribunal.
(9)
CORPORATE BUSINESS LAW AND AUDITING
Indian Contract Act - Formation - Terms of contract - Forms of contract - Offer and
Acceptance Considerations. Capacity - Flaw in consent, Void agreements - Illegal
agreements. Memorandum of Association - Contents and Alteration - Doctrine of Ultra Vires
147
1.
- Articles of Association - Contents - Distinction between the Two - Share Capital - Kinds of
Shares - Voting Rights - Borrowing powers of companies -Membership in a company -
Directors - Legal position - Appointment, removal, Rights, Duties and Powers - Qualification
and Disqualification. Meetings and Resolutions - Statutory Meeting - Annual General
Meeting – Extra Ordinary General Meeting - Resolutions - Ordinary & Special. Definition of
Audit - Difference between auditing and accountancy - Scope of auditing -Objectives of
auditing - Nature and Scope of internal audit - Financial vs. operational audit - Internal
control; nature and scope - Verification of evidence - Detailed checking vs. sample checking
- Internal audit and statutory audit - Interface between internal auditor and statutory
auditor. (9)
BANKING FINANCIAL SERVICES
Central Banking and Role of RBI and their functions. Commercial Banks - E - Banking -ATM
Cards, Debit cards, Personal Identification Number - Electronic Fund Transfer-Electronic
Clearing System. Negotiable Instruments - Promissory Note - Bills of Exchange, Cheque,
Draft - Definitions, Features - Crossing - Endorsement - Material Alteration - Paying Banker
- Rights and Duties - Statutory Protection - Dishonour of Cheques - Merchant Banking -
Functions - Issue Management - Managing of new issues - Underwriting - Capital market -
Stock Exchange - Role of SEBI-Leasing and Hire purchase - Concepts and features - Types of
lease Accounts-Factoring - Functions of Factor - Consumer finance - Venture capital -
Mutual Funds - Credit Rating. Insurance - Different types - Life, marine, fire, motor, health,
pension plan, annuity, rural insurance.
(9)

TOTAL: 45 Hours
TEXT BOOKS
1. Srinivasan N.P, C.B Gupta., "Entrepreneurial Development", Sultan Chand and Sons
Publishers, 2014.
2. J.S. Saini, S.K. Dhameja., "Entrepreneurship and Small Business", Rawat Publications,
1998.
REFERENCE BOOKS
1. B.N. Tandon, S. Sudharsanam, S. Sundharabahu., "A Handbook of Practical Auditing",
S.Chand Limited, 2006.
2. B. Santhanam., "Banking and Financial Systems", Margham Publishers, 2012.
3. B. Santhanam., "Financial Services", Margham Publishers, 2016.
4. Dr. M.N. Mishra., "Law of Insurance", Central law agency.
5. H.P. Machiraju., "Indian Financial System", Vikas Publishing House Pvt. Ltd, 2007.
6. S. Badre Alam ., P. Saravanavel ,"Mercantile Law".
7. Vinod K. Singhania .,"Indirect Tax".

ONLINE RESOURCES

1. https://onlinecourses.nptel.ac.in/noc20_ge08/preview

148
1.
 OPEN ELECTIVES
19CEOE01- TOWN PLANNING AND ARCHITECTURE
ASSESSMENT: THEORY L T P C

COURSE OUTCOMES: 3 0 0 3

After successful completion of the course, student will be able to

CO1: interpret the geometric forms and aesthetic qualities of Architecture
CO2: integrate the various elements of architecture and orientation of buildings
CO3: describe the development plans and planning regulations
CO4: incorporate the development control rules in town and country planning

PRINCIPLES OF TOWN PLANNING

Evaluation of planning – Objects of town planning – principles of town planning- origin of
towns – growth of towns – origin – direction – various forms of planning
(9)
ELEMENTS OF ARCHITECTURE
Introduction of architecture - definition - Evaluation of geometric forms - function and
history - Sphere, Cube, Pyramid, Cylinder and Cone - aesthetic qualities of Architecture -
Proportion, Scale, Balance, Symmetry, Rhythm and axis - Contrast in Form - Harmony.
(9)
PRINCIPLES OF ORIENTATION AND PLANNING OF BUILDINGS
Factors affecting orientation - Sun-Wind-Rain - Orientation criteria for Indian conditions -
Principles governing the theory of planning - Planning of residential buildings.
(7)
DEVELOPMENT PLAN
Principles of city planning - levels of planning- scope and contents of regional plan, master
plan, detailed development plan and structure plan - preparation and implementation -
planning of new towns – slum clearance and urban renewal.
(9)
PLANNING LEGISLATION AND DEVELOPMENT CONTROL RULES
Planning legislation and administration - Tamil Nadu Town and Country Planning Act,
Tamil Nadu Housing Board Act, Tamil Nadu slum clearance and Improvement Act. Zoning
regulations - sub division regulations – building regulations - Floor Space Index - minimum
plot sizes - open spaces - minimum standard dimensions
(11)
Total: 45 hours
149
1.
TEXT BOOKS:
1. RangwalaS.C., “Town Planning”, Charotar Publishing House, Anand, 2013.
2. Francis D.K., Ching, “Architecture Form, Space and Order”, Oxford University Press, 2014.

ONLINE RESOURCES
1. https://nptel.ac.in/courses/124/107/124107001/
2. https://nptel.ac.in/content/storage2/courses/109104047/pdf/lecture40.pdf

150
1.
 19CEOE02- CLIMATE CHANGE AND ADAPTATION
ASSESSMENT: THEORY
COURSE OUTCOME L T P C
After successful completion of the course, students will be able to
CO1: Outline the earth’s system which influences the climatic factors of the 3 0 0 3
earth.
CO2: Infer the evidences and observed changes in the climate and environment on a global
scale and in India.
CO3: Analyse the impacts of climate change on various sectors and the uncertainties over
the projected impacts of climate change.
CO4: Investigate the various adaptation and mitigation options in various sectors and
examine the mitigation efforts made in India.
CO5: Correlate future clean technology and alternate energy options inferred in clean
development mechanism.
EARTH’S CLIMATE SYSTEM
Introduction-Climate in the spotlight-The Earth’s Climate Machine – Climate Classification
– Global wind systems – Trade Wind Systems – Trade Winds and the Hadley Cell – The
Weserlies – Cloud formation and Monsoon Rains – Storms and Hurricanes – The
Hydrological Cycle – Global Ocean Circulation – EI Nino and its Effect – Green House Gases
and Global Warming – Carbon Cycle.
(9)
OBSERVED CLIMATE CHANGE AND ITS CAUSES
Observation of Climate Change – Changes in pattern of temperature, precipitation and sea
level rise – Observed effects of Climate Changes – Patterns of Large Scale Variability –
Drivers of Climate Change - Feedbacks – The Montreal Protocol – UNFCCC – IPCC –
Evidences of Changes in Climate and Environment – on a Global Scale and in India.
(9)
IMPACTS OF CLIMATE CHANGE
Impacts of Climate Change on various sectors – Agriculture, Forestry and Ecosystem –
Water resources – Human Health – Industry, Settlement and Society – Methods and
Scenarios – Projected Impacts for different regions – Uncertainties in the Projected Impacts
of Climate Change.
(9)
CLIMATE CHANGE ADAPTATION AND MITIGATION MEASURES
Adaptation Strategy/options in various sectors – Water – Agriculture – Infrastructure and
Settlement including coastal zones. Human Health – Tourism – Transport – Energy – Key
Mitigation Technologies and practices – Energy supply – Transport – Buildings – Industry –
Agriculture – Forestry – Carbon sequestration – Carbon Capture and Storage (CCS) -
Mitigation Efforts in India and Adaptation funding.
(9)
CLEAN TECHNOLOGY AND ENERGY
Clean Development Mechanism – Carbon Trading – Examples of future Clean Technology –
Biodiesel – Natural Compost – Eco-friendly Plastic – Alternate Energy – Hydrogen – Bio-
fuels – Solar Energy – Wind – Hydroelectric Power.
(9)
Total: 45 hours
151
1.
TEXT BOOKS:
1. Dash Sushil Kumar, “Climate Change – An Indian Perspective”, Cambridge University
Press India Pvt. Ltd, 2007.
2. UNIPCC Fifth Assessment Report, 2014.
3. Jan C. van Dam, Impacts of “Climate Change and Climate Variability on Hydrological
Regimes”, Cambridge University Press, 2003.

REFERENCES:
1. Anil Markandya, Climate Change and Sustainable Development: Prospects for
Developing Countries, Routledge, 2002.
2. Heal, G. M., Interpreting Sustainability, in Sustainability: Dynamics and Uncertainty,
Kluwer Academic Publ., 1998.
3. Jepma, C.J., and Munasinghe, M., Climate Change Policy – Facts, Issues and Analysis,
Cambridge University Press, 1998.
4. Dash Sushil Kumar, “Climate Change – An Indian Perspective”, Cambridge University
Press India Pvt. Ltd, 2007.

ONLINE RESOURCES:
1. “An Inconvenient truth (2006)”- video
2. https://climate.nasa.gov
3. https://unfccc.int
4. https://environment .gov.au

152
1.
 19CEOEO3 - METRO SYSTEMS AND ENGINEERING
ASSESSMENT: THEORY
L T P C
COURSE OUTCOMES:
3 0 0 3
After successful completion of the course, student will be able to
CO 1: Integrate the basic elements of MRTS, BRTS, LRTS and other
transportation systems
CO 2: Illustrate the components of metro rail systems
CO 3: Apply the concepts of ITS in the field of Transportation Engineering

PRINCIPLES OF TRANSPORTATION SYSTEMS

Transportation systems in India – various modes of transport – public transport –
Intermediate public transport – types – characteristics – other urban transportation modes
– drawbacks- various transit systems
(9)
MRTS
Definition – Mass Rapid Transit System – History of MRTS - Need for MRTS – connectivity
in Indian conditions – cities having MRTS – infrastructure – operations – fares and ticketing
- case study.
(8)
BRTS and LRTS
Bus Rapid Transit System – terminology – history -features - performance – cost -
drawbacks – Light Rail Transit System – necessity – types – gauge- capacity integration
with cycles – comparison to other rail modes
(9)
METRO RAIL SYSTEMS
History of Metro trains - Need for Metro rail – connectivity in Indian conditions – cities
having Metro - construction techniques adopted in Metro Rail stations - Case study – Delhi
Metro (DMRC) – Chennai Metro (CMRL)
(10)
ITS
Definition – Intelligent Transport System – Principles - Application of ITS technologies in
various countries – smart transportation - case studies
(9)
Total: 45 Hours

153
1.
TEXT BOOKS:
1. Pradip Kumar Sarkar, Vinay Maitri, G. J. Joshi ·“Transportation Planning Principles,
Practices and Policies”, Prentice Hall India Pvt., Limited 2017
2. D. Johnson Victor, S. Ponnuswamy, “Urban Transportation Planning, Operation and
Management” Tata McGraw-Hill Education, 2012
3 Mashrur A. Chowdhury, Adel Wadid Sadek “Fundamentals of Intelligent Transportation
Systems Planning” Artech House · 2003

4 Sumit Ghosh, Tony S. Lee, “Intelligent Transportation Systems Smart and Green
Infrastructure Design, Second Edition” CRC Press · 2010

ONLINE RESOURCES
1. https://nptel.ac.in/content/storage2/courses/105101008/downloads/cete_48.pdf

154
1.
 19CEOE04- RENEWABLE ENERGY RESOURCES

ASSESSMENT : THEORY
L T P C
COURSE OUTCOME
After successful completion of the course, student will be able to 3 0 0 3
CO1 : Infer the current energy scenario and future energy usage in India.
CO2 : Interpret the concepts of solar energy, wind energy, tidal energy and
biomass energy.
CO3 : Compare the energy utilization from wind energy, solar energy, biomass energy and
tidal energy.
CO4 : Correlate the challenges and problems associated with the use of energy sources.
ENERGY PERSPECTIVES
Conventional and non conventional energies - Energy and sustainable development -
Global energy scenario - Energy scenario in India - Energy consumption pattern in rural
and urban regions in India - Energy efficiency and economy - Energy losses and its control -
Renewable energy potential mapping - Plant load factor
(9)
SOLAR ENERGY PERSPECTIVES
Concept of solar energy - Solar energy to light and to thermal conversions - Total energy
and necessary infrastructure – Units and measurement of solar radiation - Temperature
dependent collecting devices and their efficacies - Design aspects – Typical applications:
heating, cooling, lighting, power generation and cooking.
(9)
WIND ENERGY PERSPECTIVES
Wind potential in India - Wind turbines and their types - Merits and demerits - Wind power
and appropriate coefficient – Efficiency and performance of wind machines -Energy
conversion and storage - Synchronous invertors - Various storage aspects: battery, fly
wheel, hydrogen and compressed air.
(9)
BIOMASS ENERGY PERSPECTIVES
Biomass potential in India - Gobar gas and producer gas - Characteristics of biomass -
Operation and design of biogas plants - Objectives, principles and operational aspect of
biogassifiers - Pyrolysis and incineration - Power generation from municipal solid waste
and industrial Sludges - Application of biodiesel plants - Fuel cells.
(9)
TIDAL ENERGY PERSPECTIVES
Tidal aspects in coastal India - Tidal energy conversion system: mechanical to electrical and
thermal to electrical - Tidal force calculation and power generation - conceptualization and
potential of geothermal energy - Geothermal vents.
(9)
TOTAL: 45 Hours
TEXT BOOKs
1. Sukathme, S.P, Nayak J.K., "Solar Energy", Tata McGraw-Hill Book Co., New Delhi, 2017.
2. Rai, G.D., "Non Conventional Energy Sources", Khanna Publishers, New Delhi, 2010.

155
1.
3. P.Kothari, K.C Singal, Rakesh Ranjan “Renewable Energy Sources and Emerging
Technologies”, PHI Learning Pvt.Ltd, New Delhi, 2013.
4. Scott Grinnell, “Renewable Energy & Sustainable Design”, CENGAGE Learning, USA, 2016.

REFERENCE BOOKS
1. Richard A. Dunlap,” Sustainable Energy” Cengage Learning India Private Limited,
Delhi, 2015.
2. Godfrey Boyle, “Renewable energy”, Open University, Oxford University Press in
association with the Open University, 2004.
3. Shobh Nath Singh, ‘Non-conventional Energy resources’ Pearson Education ,2015.

Online resources:
1. https://swayam.gov.in/nd1_noc20_ge06/preview
2. https://swayam.gov.in/nd2_nou20_cs09/preview

156
1.
 19CEOE05- PRINCIPLES OF SUSTAINABLE DEVELOPMENT
ASSESSMENT: THEORY
L T P C
COURSE OUTCOME
3 0 0 3
At the end of this course, the student will be able to
CO1: Identify the components, factors and environmental issues affecting Sustainable
development.
CO2: Assess the role of International summits, conventions and Environmental aspects on
Sustainable development.
CO3: Interpret the necessity and importance of Indian and International Socio –economical
and legal aspects in Sustainability.
CO4: Illustrate the different strategies to achieve Sustainable development.
CO5: Assess the role of Life cycle Assessment, Cleaner Production and Sustainable
Chemistry to achieve sustainable development. .
CONCEPTS OF SUSTAINABLE DEVELOPMENT
Sustainable development- Evolution of Environmental awareness and Sustainable
development, global Sustainable development goals -components and factors affecting
Sustainable development-Demographic dynamics and sustainability- Environmental issues
and crisis- ozone layer depletion, global warming and climate change
(9)
ENVIRONMENTAL ASPECTS
International Environmental summits, conventions and agreements-Tiwari committee
recommendation – Role of Pollution Control Board - Transboundary issues - Ecological
indicators- Ecological foot print- Carbon foot print - Basic concept of Environmental impact
assessment
(9)
SOCIO ECONOMIC AND JUDICIAL ASPECTS
UN Sustainable development policies through trade- World Trade Organization-
International monetary fund and World bank –Circular Economy and Sustainable
Development - Socio economic policies for sustainable Development- Role of Judiciary in
Sustainable Development – Major Environmental Cases in India – Development of
Environmental Policies in India - Environment Protection Act, 1986 – EIA notification 2006
- National Conservation Strategy and Policy Statement on Environment and Development,
1992 - Policy Statement for the Abatement of Pollution, 1992 - National Environment
Policy, 2006. SDG India Index – Baseline Report 2018
(9)
STRATEGIES FOR SUSTAINABLE DEVELOPMENT
Economic growth and Sustainable Development - Resource depletion and resource
protection- – Internet of things and Sustainable Development – Sustainable Management of
Forest, Land, water- Natural Disaster management- case studies.
(9)
157
1.
CLEANER PRODUCTION, LIFE CYCLE ASSESSMENT – GREEN/SUSTAINABLE
CHEMISTRY
Cleaner Production, definition, aim, application-Generic process of Cleaner Production
Assessment- Life cycle Assessment - definition, necessity and elements- ISO Environmental
standards- Environmental Audit –Green Chemistry – twelve Principles of Green Chemistry
– case studies.
(9)
TOTAL : 45 Hours

TEXT BOOKS
1. Ramakrishnan, P. S., "Ecology and Sustainable Development", National Book Trust, New
Delhi, 2001
2. Paul Robbins, John Hintz, and Sarah A. Moore, "Environment and Society: A Critical
Introduction", Wiley-Blackwell, 2014
3. Bimal N. Patel and Ranita Nagar, “Sustainable Development and India”, Oxford University
Press, 2018.
REFERENCE BOOKS
1. Nick Hanley, Jason F. Shogren and Ben White, "Environmental Economics in Theory and
Practice", Macmillan Publishers,
UK, 1997
2. Tietenberg T. and Lynne Lewis, "Environmental and Natural Resource Economics",
Harper Collins, Routledge, 2016
3. Kirkby, J.O., Keefe, P., and Timberlake, "Sustainable Development", Earthsean Pub.,
London, 2001
Online Resources:
1.https://nptel.ac.in/courses/107/103/107103081/

158
1.
 19CEOE06 - DISASTER MANAGEMENT

ASSESSMENT : THEORY L T P C
COURSE OUTCOME 3 0 0 3
At the end of this course, the student will be able to
CO1 : Identify natural and manmade disasters
CO2 : Explain in detail about causes and effects of natural and manmade disasters.
CO3 : Apply geospatial techniques (including GIS) that can enhance vulnerability
assessments
CO4 : Identify and analyse the factors that give rise to differential vulnerabilities and levels
of community resilience and suggest necessary mitigation plans
CO5 : Assess and manage these vulnerabilities through disaster planning and policy-
making.
NATURAL DISASTERS
Cyclones, Floods, Drought and Desertification - Earthquake, Tsunami, Landslides and
Avalanche.
(9)
MAN MADE DISASTERS
Chemical industrial hazards, major power breakdowns, traffic accidents, Fire, War, Atom
bombs, Nuclear disaster- Forest Fire- Oil fire -accident in Mines.
(9)
GEOSPATIAL TECHNOLOGY
Remote sensing, GIS and GPS applications in real time disaster monitoring, prevention and
rehabilitation- disaster mapping.
(9)
RISK ASSESSMENT AND MITIGATION
Hazards, Risks and Vulnerabilities - Disasters in India, Assessment of Disaster Vulnerability
of a location and vulnerable groups- Preparedness and Mitigation measures for various
Disasters- Mitigation through capacity building -Preparation of Disaster Management
Plans.
(9)
DISASTER MANAGEMENT
Legislative responsibilities of disaster management- Disaster management act 2005- post
disaster recovery & rehabilitation, Relief & Logistics Management; disaster related
infrastructure development- Post Disaster, Emergency Support Functions and their
coordination mechanism.
(9)
TOTAL: 45 Hours

159
1.
TEXT BOOKS
1. Khanna B K, "All You Wanted To Know About Disasters", New India Publishing
Agency, New Delhi, 2005.
2. Ramana Murthy, "Disaster Management", Dominant, New Delhi, 2004.
3. Rajdeep Dasgupta, "Disaster Management and Rehabilitation", Mittal Publishers,
New Delhi, 2007.

REFERENCES
1. Disaster Management in India- A Status Report- Published by the National Disaster
Management Institute, Ministry of Home Affairs, Govt. of India, 2004.
2. Murthy D. B. N., "Disaster Management: Text and Case Studies", Deep and Deep
Publications (P) Ltd., New Delhi, 2007.
3. Sundar I. and Sezhiyan T., "Disaster Management", Sarup and Sons, New Delhi, 2007.

160
1.
 ONE CREDIT COURSES
19CEOC01 BUILDING CONSTRUCTION PROCESS- AN OVERVIEW
1. Introduction of building Construction Process – Step by Step
L T P C

a. Site Selection 1 0 0 1
b. Marking
c. Earth works excavation
d. Concreting
e. Brick works
f. Plastering
g. Flooring
h. Painting [2]
2. Quantity measurement of Building
a. Quantity Calculation of each element
b. Material calculation
c. Rate arriving per unit
[2]
3. Building Material and its Selection process
a. What are materials available in the market and How to select with practical
approach?
[2]
4. Good Concrete making
a. Batching
b. Mixing
c. Transporting
d. Compacting
e. Finishing
f. Curing
[2]
5. Construction Practices
a. Do’s and don’ts in construction practices
[2]
6. Cement Manufacturing Process, Types of cement and It’s application
a. Cement Manufacturing process
b. Types of cement
c. What are the cements available in the market
d. Testing of cement – Physical and Chemical
e. Application of cement in construction
[2]
TOTAL : 12+3 (Evaluation) = 15hours

161
1.
 19CEOC02 APPLICATIONS OF IoT IN CIVIL ENGINEERING
ASSESSMENT: THEORY
COURSE OUTCOMES: L T P C
On successful completion of this course, the student will be able to
1 0 0 1
CO1: Describe what IoT is and how it works today
CO2: Design and program IoT devices
CO3: Design an IoT device to work with a Cloud Computing infrastructure.
CO4: Transfer IoT data to the cloud and in between cloud providers
CO5: Define the infrastructure for supporting IoT deployments

Introduction to IoT Defining IoT

Characteristics of IoT - Physical design of IoT - Logical design of IoT - Functional blocks of
IoT - Communication models & APIs (3)

IOT Standards and Components

Requirement of international standard ( case study) - Design of IOT systems -
Development of prototypes for civil engineering projects. (2)

Relevance of IOT for the future.

IOT in Construction site - Internet of Everything - IOT and Individual Privacy. (3)

IOT in Indian Scenario

IOT and Aadhaar - IOT for concrete and curing services - IOT for rural empowerment (2)

IOT Applications (Case Studies)

Intelligent Traffic systems - Smart Parking - IOT for smart cities. (2)

TOTAL : 12+3 (Evaluation) = 15hours

TEXT BOOKS
1. Micahel Miller “The Internet of Things: How Smart TVs, Smart Cars, Smart Homes, and
Smart Cities Are Changing the World”, Pearson Education, USA, 2015.
2. Vijay Madisetti and Arshdeep Bahga, “Internet of Things (A Hands-onApproach)”, 1st
Edition, VPT, 2014

REFERENCE BOOKS
1. Francis daCosta, “Rethinking the Internet of Things: A Scalable Approach to
Connecting Everything”, 1st Edition, Apress Publications, 2013

162
1.
 19CEOC03 CERTIFICATION AND CAREER ROAD MAP IN CIVIL ENGINEERING

ASSESSMENT: THEORY
L T P C
COURSE OUTCOME:
1 0 0 1
At the end of the course, the students will be able to

CO1: understand the District Town and Country Planning approval process

INTRODUCTION

Planning Approval Meaning, Controls / Regulating Competent Authority, Types of Approval,

Checklist for Approval, E-DCR Online Drawing Submission

CORPORATION/LOCAL BODY APPROVAL

Residential - Group Housing / Villas, Apartments, Commercial include office buildings,

warehouses, and retail buildings, Industrial & Institutional - Factories and other
premises used for manufacturing, altering, repairing, Schools & Colleges or any other
educational Institutions.

THE DISTRICT TOWN & COUNTRY PLANNING OFFICE

Residential - Group Housing / Villas, Apartments, Commercial include office buildings,

warehouses, and retail buildings, Industrial & Institutional - Factories and other
premises used for manufacturing, altering, repairing, Schools & Colleges or any other
educational Institutions.

DTCP CHENNAI APPROVAL

Residential - Group Housing / Villas, Apartments, Commercial include office buildings,

warehouses, and retail buildings, Industrial & Institutional - Factories and other
premises used for manufacturing, altering, repairing, Schools & Colleges or any other
educational Institutions.

E-DCR ONLINE DRAWING APPROVAL

E-DCR online drawing submission, E-DCR stages, E-DCR scrutiny process, Scope of
the E-DCR system, E-DCR drawing specification,
TOTAL : 12+3 (Evaluation) = 15hours

Reference:
1. Guidelines on Preparation of Layout & Building Plans under Tamilnadu Combined
Development and Building Rules, 2019
163
1.
 19CEOC04 ENVIRONMENTAL MONITORING
ONE CREDIT COURSE
L T P C
ASSESSMENT: THEORY
1 0 0 1
COURSE OUTCOME
At the end of this course, the student will be able to
CO1: Outline the significant aspects of environmental monitoring and sampling
CO2: Assess the air and water quality monitoring methods
CO3: Interpret the status and trends using monitoring data collected for water and air.

CONCEPTS OF ENVIRONMENTAL MONITORING

Objectives and functions of monitoring - Selection of monitoring sites - Sampling: Grab
Sampling, Composite Sampling, Integrated Composite Sampling - Sampling Frequency and
Preservation - Preparation of standard solutions: primary standards, secondary standards ,
stock solution, standard solution , normality, molarity, percent solution, standardization of
solutions, Expression of results; mg/l, ppm.
(3)
AIR QUALITY MONITORING
Ambient air quality monitoring - Source of air quality monitoring - Frequency and mode of
sampling: Sampling time and sampling locations for air quality monitoring - Environmental
procedures for determination of: NOx, Sox, CO, PM (Particulate Matter) - Structure of
monitoring report for air quality monitoring.
(4)
WATER QUALITY MONITORING
Physical water characteristics: Colour True and apparent colour, Temperature, Odor –
Threshold method, Turbidity – Visual and Instrumental method, Solids – Total solids , Total
suspended solids, total dissolved solids - Inorganic and non-metallic constituents: pH,
Potentiometric method, Alkalinity, Hardness, Acidity, Chlorides and Sulphates, Metallic
constituents: Chromium , Fe, by spectrophotometer - Organic constituents: BOD and COD -
Structure of monitoring report for water quality monitoring.
(5)
TOTAL : 12+3 (Evaluation) = 15hours
TEXT BOOKS
1. Maiti, S.K., "Handbook of methods in Environmental Studies (Vol.I and II)", Oxford Book
Company, 2004

164
1.
2. Garg S. K., "Environmental Engineering", Vol. I Khanna Publishers, New Delhi, 33rd
edition.

3. Garg S. K., "Environmental Engineering", vol. II, Khanna Publishers, New Delhi, 39th
edition.
4. H.V.N. Rao and M.N. Rao, “Air Pollution”, Tata McGraw-Hill Publishing Company Limited,
2004.
REFERENCE BOOKS
1. IS: 5182, Methods for measurements of air pollution (Part- I, II, IV, V, X), Bureau of Indian
Standards, New Delhi, 2003.
2. IS 3025, Methods of sampling and test (physical and chemical) for water and wastewater.
Bureau of Indian Standards, New Delhi, 1986.
Online Reference:
https://nptel.ac.in/courses/103/106/103106162/

165
1.
 19CEOC05 PYTHON FOR CIVIL ENGINEERS
ASSESSMENT: THEORY
COURSE OUTCOMES: L T P C
On successful completion of this course, the student will be able to
CO1: Develop simple Python program in interactive and script mode. 1 0 0 1
CO2: Construct Python programs using functions and strings.
CO3: Make use of Python lists ,set, tuples, dictionaries to represent compound data.
CO4: Build Python Programs to read and write data from/to files.
CO5: Develop python programs to handle exceptions.

BASICS OF PYTHON PROGRAMMING

Introduction-Python interpreter- interactive and script mode; values and types, operators,
expressions, statements, precedence of operators, Multiple assignments, comments.
(2)
CONTROL STATEMENTS AND FUNCTIONS IN PYTHON
Conditional (if), alternative (if-else), chained conditional (if-elif-else); Iteration: state,
while, for, break, continue, pass; Functions: Introduction, inbuilt functions, user defined
functions, passing parameters, return values, recursion.
(3)
DATA STRUCTURES: STRINGS, LISTS, SET
Strings: string slices, immutability, string methods and operations; Lists: creating lists, list
operations, list methods, mutability, aliasing, cloning lists, list and strings, list and functions
; list processing : list comprehension, searching and sorting, Sets: creating sets, set
operations.
(3)
DATA STRUCTURES: TUPLES, DICTIONARIES
Tuples: Tuple assignment, Operations on Tuples, lists and tuples, Tuple as return value;
Dictionaries: operations and methods, Nested Dictionaries.
(2)
CIVIL ENGINEERING APPLICATIONS
Programming for Concrete Mix Design, Concrete quantity calculation, Brickwork material
Calculation, Cement and Sand material calculation for Mortar.
(2)
Total :12+3 (Evaluation)= 15Hours

TEXT BOOKS:
1. Ashok NamdevKamthane,Amit Ashok Kamthane, Programming and Problem Solving
with Python , Mc-Graw Hill Education,2018.
2. Timothy A. Budd, Exploring Python, Mc-Graw Hill Education (India) Private Ltd., 2015.

166
1.
REFERENCES
1. Robert Sedgewick, Kevin Wayne, Robert Dondero, Introduction to Programming in
Python: An Inter-disciplinary Approach, Pearson India Education Services Pvt. Ltd., 2016.

167
1.
 19CEOC06 3D PRINTING OF CIVIL ENGINEERING STRUCTURES

ASSESSMENT: THEORY
COURSE OUTCOMES: L T P C
On successful completion of this course, the student will be able to 1 0 0 1

CO1: Describe about 3D printing methodology.

CO2: Identify the process required for fabricating.
CO3: Draft the necessity models in the CADD Software.
CO4: Design the concrete mix with various materials.
CO5: Identify the challenges in the field for new methodology.
INTRODUCTION

Three-Dimensional Printing – Introduction, Prototyping fundamentals, Historical

development, Classification, Commonly used terms.

ADDITIVE MANUFACTURING TECHNOLOGY

Definition, Additive vs Conventional Manufacturing, Advantages of AMT, Classification of

AMT Process – Stereolithography – Fused Deposition Modelling – Selective Laser Sintering
– 3D Printing, Applications to various fields.

3D PRINTING IN CONSTRUCTION

Problems in Construction Industry – Need for Automation, Application of 3D Printing –

Contour Crafting – Advantages and Limitations, 3D Printing software – Computer Aided
Drafting.

CONCRETE MIX FOR 3D PRINTING

Mix goals – Criteria – Compressive strength – Extrudability – Flowability – Buildability –

Setting time, Materials – binders – additives – mineral admixtures – fibres, Mix
proportioning.

CASE STUDIES AND CHALLENGES

3D printed structures using contour crafting, 3D printed buildings in India, Challenges in

3D printing –curing time – bonding – automated fabrication –connections.

TEXT BOOKS

1. CK Chua, Kah Fai Leong, “3D Printing and Rapid Prototyping- Principles and
Applications”, World Scientific, 2017

168
1.
 2. Khanna Editorial, “3D Printing and Design”, Khanna Publishing House, Delhi

REFERENCE BOOKS

1. J.D. Majumdar and I. Manna, “Laser-Assisted Fabrication of Materials”, Springer

Series in Material Science, 2013.

169
1.
 19CEOC07 ALTERNATIVE BUILDING MATERIALS FROM WASTE

ASSESSMENT: THEORY
L T P C
COURSE OUTCOME
1 0 0 1
CO1: Identify the characteristics related to waste

CO2: Evaluate the properties of blended materials for non-load bearing purpose

CO3: Evaluate the properties of blended materials for load bearing purpose

INTRODUCTION
Environmental issues – Global warming – Eco friendly materials – Materials related to energy and
carbon di oxide emission
(2)
BLOCKS & BRICKS
Waste based blocks and bricks – Advantages – Disadvantages – Applications
(2)
CEMENTS
Pozzolana – Types – Agro and industrial based waste – Characterization – - Process adopted to
improve properties - Applications in cement / mortar / concrete
(3)
AGGREGATES
Artificial aggregates – Waste as replacement for aggregates – Characterization – Applications in
Cement / mortar / concrete
Recycled coarse aggregate – Recycled fine aggregate
(3)
MISCELLANEOUS ELEMENTS
Wastes used for non-structural elements - Partitions – Walls – Roofing system – windows
(2)

TOTAL : 12+3 (Evaluation) = 15hours

REFERENCE BOOKS

1. Neville, A. M., “Properties of concrete”, Pearson Education Limited, 2012.

2. Santhakumar A. R., “Concrete Technology”, Oxford University Press, New Delhi,
2018.

170
1.
 19CEOC08 STRUCTURAL DRAWING
ASSESSMENT: PRACTICAL
L T P C
COURSE OUTCOME
After successful completion of the course, student will be able to 0 0 2 1
CO1: Describe and write the design procedures for steel and concrete
elements and structures
CO2: Draw details of connections, splices, columns, column bases and plate girders as per
IS code
CO3: Draw the different concrete and steel elements and structural components to
appropriate scale as per design and codal requirements
CO4: Draw details of slabs, beams, columns, footings, water tanks and retaining walls as per
IS code
STEEL
Detailed drawing of the following structure
1. Bolt Connections - framed, stiffened seat & unstiffened seat connections
2. Welded Connections - framed, stiffened seat & unstiffened seat connections
3. Tension and column splices
4. Battened and laced Columns
5. Column bases
6. Welded plate girders
CONCRETE
Detailed drawing of the following structure
1. One way floor slab and two way floor slab.
2. Continuous beams.
3. Column with footing
4. Dog legged staircase
5. Water tanks.
6. Retaining walls
TOTAL: 12+3 (Evaluation) = 15hours

TEXT BOOKS
1. Krishnamurthy,D, "Elementary Structural Design and Drawing", CBS Publishers and Distributors,
2018.
2. Duggal, SK, "Limit State Design of Steel Structures", Tata McGraw Hill Publication, 2017.
3. Sinha, SN, "Handbook of Reinforced Concrete Design", Tata McGraw Hill Publication,
2006.

171
1.
REFERENCE BOOKS
1. Krishna raju, N, “Structural Design and Drawing”, Universities Press, 2009
2. Bhavikatti, SS, "Design of Steel Structures by Limit State Design", IK International Pvt.
Ltd., 2011.
3. Shiyekar, MR, "Limit State Design in Structural Steel", PHI learning Pvt. Ltd., 2013.
4. Gambhir, ML, “Design of Reinforced Concrete Structures”, PHI learning Pvt. Ltd., 2008

172
1.
 19CEOC09 SUSTAINABILITY IN CONSTRUCTION
ASSESSMENT: THEORY
COURSE OUTCOMES: L T P C
CO1: Understand the definition, concept & objectives of sustainable 1 0 0 1
construction.
CO2: Integrate with architects, designers and builders, to improve a building’s performance.
CO3: State the concept of energy efficient design used in construction.
CO4: Select the suitability of eco-friendly building materials for construction.
CO5: Assess the appropriate technology for sustainable construction practice.
FUNDAMENTALS OF SUSTAINABLE BUILDING
The context and principles of sustainable design - A view of the current state of sustainable
building in national and internationally - Physical, psychological and financial benefits of
Sustainable construction.
(3)
SUSTAINABLE ARCHITECTURE AND DESIGN
Role of architecture in sustainable construction - An introduction to sustainable site
planning and ecological design - Importance of transportation planning, siting and
relationship to sustainability - Benefits of adopting a natural systems-based approach - Bio-
mimicry as a design tool based on ecosystem analogy.
(3)
ENERGY EFFICIENT DESIGN
Importance of building energy systems - impacts of energy with human experience and the
global environment –Low Energy Building Strategies - Fundamental building energy
systems: HVAC, lighting and water conservation.
(3)
SUSTAINABLE MATERIALS SELECTION
Factors in material selection–Material considerations when designing a green construction
– Eco friendly building materials: Environmental impact study of building materials about
composition, production and recycling, physical properties - Life cycle assessment.
(3)
SUSTAINABLE BUILDING TECHNOLOGIES
Introduction to alternative building technologies: Traditional, vernacular, advanced
technological such as interlocking blocks, composite beam and panel, cavity walls, core unit
slabs, filler slabs, ferro-cement walls and earthen buildings.
(3)
TEXT BOOKS:

1. Sustainable Construction – Green Building Design & Delivery,Kibert,Wiley 4th

Edition, 2016

173
1.
2. Sustainable Building - Design Manual Pt 1 & 2, The Energy and Resources Institute,
TERI, 2004
3. Alternative Building Materials and Technologies, K S Jagadeesh, B V Venkatta Rama
Reddy & K S NanjundaRao – New Age International Publishers, 2017
4. Green Building: Project Planning and Cost Estimating, Karolides, A, R S Means - 3rd
Edition 2010
5. Integrated Sustainable Design of Buildings, Paul Appleby, Routledge; 1st edition -
2015

174
1.
 19CEOC010 INTRODUCTION TO IMAGE PROCESSING AND GIS
ASSESSMENT: PRACTICAL
COURSE OUTCOMES: L T P C
On successful completion of this course, the student will be able to 0 0 2 1

CO1: Carry out remote sensing and GIS applications of various industrial needs.
CO2: Demonstrate the various environmental change detections.
CO3: Use the instrumental data for decision support system
CO4: Create a map incorporating the required features as required.
CO5: Analyze, model and create a database management system
LIST OF EXPERIMENTS

1. Starting up a GIS map and layer editing & exploring

2. Using tools : Hyperlink, identify and navigate
3. Exploring feature- attribute relationship
4. Exploring benefits of the feature-attribute relationship
5. Creating a map layout
6. Reversing a map layout
7. Finding places by using coordinates
8. Determination of Measurements on maps using Mercator projection, Mollweide
projection and Winkel Tripel projection
9. Implementation of Vector and Raster data in ArcMap
10. Working with geographic data and exploring
11. Exploration of Query data based on attributes and locations
12. Analyzing data using Buffer and Overlay
13. Analyzing the GIS analysis process using tools, query and combinations

TEXT BOOKS :

1. Floyd F.Sabins, J.R., WH, "Remote Sensing Principles Interpretation", Freeman and
Company and Francis Company, France, 1996.
2. Lillesand, Thomas.M and Raiph W.Kiefer, "Remote Sensing and Image Interpretation",
John Wiley Sons, 2002.

REFERENCE BOOKS :

1. Burrough.P.A., "Principles of GIS for Land Resources Assesment, Oxford Publication,

1998.
2. Thomas.M.Lillesand and Ralph.W.Kiefer, Remote Sensing and Image Interpretation, John
Wiley and Sons, Inc, 2003.

175
1.