Important Safety Instructions Getting Started Connections

Accessories  For better picture and audio quality, connect to a digital device using an HDMI  PC/DVI AUDIO IN input is not supported.

LED TV
cable.  For HDMI/DVI cable connection, you must use the HDMI IN 2 (DVI) port.
 Remote Control & Batteries (AAA x 2)  Warranty Card / Regulatory Guide (Not available in some locations)  The picture may not display normally (if at all) or the audio may not work if an  Connecting through the HDMI cable may not be supported depending on the
external device that uses an older version of HDMI mode is connected to the TV. PC.
 Owner’s Instructions  Power Cord If such a problem occurs, ask the manufacturer of the external device about the

Warning! Important Safety Instructions

 If an HDMI to DVI cable is connected to the HDMI IN 2 (DVI) port, the audio
HDMI version and, if out of date, request an upgrade.
does not work.
 Be sure to purchase a certified HDMI cable. Otherwise, the picture may not
 For Set-top box connection using HDMI cable, we highly recommend you to

user manual
display or a connection error may occur.
connect the HDMI IN 1 (STB) port.
(Please read the safety instructions below before installing and using the product.)

Model: UA32F4100AR; Type No. UA32F4100 1 1 1 1

HDMI connection PC connection Audio connection (Digital)
Blu-ray player / DVD / PC Digital Audio System
Model code: UA32F4100ARXZN; VERSION No. TS01 CAUTION This symbol indicates that high voltage is present inside. It
Set-top box
is dangerous to make any kind of contact with any internal
RISK OF ELECTRIC SHOCK. DO NOT OPEN
S/N: ZxxC3MDF102956A part of this product.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE This symbol indicates that important literature concerning
Figures and illustrations in this User Manual are provided for reference only and COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. RE- operation and maintenance has been included with this
may differ from actual product appearance. Product design and specifications Contact SAMSUNG WORLDWIDE FER ALL SERVICING TO QUALIFIED PERSONNEL. product.
may be changed without notice. If you have any questions or comments relating to Samsung products, please  Holder Ring (2EA) Case A. Installing the SAMSUNG Wall-Mount Case B. Installing another company’s Wall-Mount
contact the SAMSUNG customer care Centre. (UA46F5000 / UA46F5020 /
Still image warning UA46F5100 / UA50F5000)
Country Customer Care Centre Web Site  The rear panel may differ
Avoid displaying still images (like jpeg picture files) or still image element (like TV • The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus,
programme logo, panorama or 4:3 image format, stock or news bar at screen bottom AUSTRALIA 1300 362 603 www.samsung.com/au depending on the model.
and to protect it from overheating, these slots and openings must never be blocked or covered.
etc.) on the screen. Constant displaying of still picture can cause ghosting of LED NEW ZEALAND 0800 SAMSUNG (0800 726 786) www.samsung.com/nz - Do not cover the slots and openings with a cloth or other materials.
screen, which will affect image quality. To reduce risk of this effect, please follow
CHINA 400-810-5858 www.samsung.com - Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
below recommendations: TV Side Panel TV Rear Panel
- Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.
 Avoid displaying the same TV channel for long periods. HONG KONG (852) 3698 4698 www.samsung.com/hk
(Chinese) • Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
 Always try to display any image on full screen, use TV set picture format menu for
best possible match. www.samsung.com/ • Do not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of fire or electric shock.
hk_en (English) • Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
 Reduce brightness and contrast values to minimum required to achieve desired
picture quality, exceeded values may speed up the burnout process. INDIA 1800 3000 8282 www.samsung.com/in swimming pool etc.). If this appratus accidentally gets wet, unplug it and contact an authorized dealer immediately.
 Frequently use all TV features designed to reduce image retention and screen 1800 266 8282 • Make sure to pull out the power cord from the outlet before cleaning.
burnout, refer to proper user manual section for details. INDONESIA 0800-112-8888 (Toll Free) www.samsung.com/id • This apparatus use batteries. In your community, there might be regulations that require you to dispose of these batteries properly to protect the  Cable manager Assembling the Cable manager
(021) 56997777
environment. Please contact your local authorities for disposal or recycling information.
• Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric shock.
For India Only
JAPAN 0120-327-527 www.samsung.com
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular Input Cables (Sold Separately)
MALAYSIA 1800-88-9999 www.samsung.com/my attention to cords at the plug end, where connected to adaptors, and at the point where they exit from the apparatus.
 HDMI-DVI
USB
This marking on the product, accessories or literature indicates PHILIPPINES 1-800-10-7267864 [PLDT] www.samsung.com/ph • To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and  Composite (AV)  Coaxial (RF)
that the product and its electronic accessories should not be 1-800-8-7267864 [Globe landline disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.  Component  HDMI Power Input
disposed of with other household waste at the end of their and Mobile] • Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local
working life. To prevent possible harm to the environment
02-4222111 [Other landline] electrical supply. (depending on the model)
or human health from uncontrolled waste disposal, please TV Controller (Panel Key)
separate these items from other types of waste and recycle SINGAPORE 1800-SAMSUNG(726-7864) www.samsung.com/sg • Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.
them responsibly to promote the sustainable reuse of material • To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus. Selecting the Media Play
resources. THAILAND 0-2689-3232, www.samsung.com/th
1800-29-3232 • Make sure to plug the power cord in until it is firmly inserted. Pull on the plug, not the cord, when removing the power cord from the outlet. Do not
For more information on safe disposal and recycling visit our website touch the power cord with wet hands.
TAIWAN 0800-32-9999 www.samsung.com/tw (UA32F4000 / (UA32F5000 / (UA32F4100 /
www.samsung.com/in or contact our Helpline numbers - 18002668282, • If this appratus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact
MEDIA.P

UA32F4001 / UA40F5000 / UA32F4105 /

180030008282. VIETNAM 1 800 588 889 www.samsung.com an authorized dealer or service center. UA32F4020) UA40F5020 / UA32F5100 /
Selecting the Menu m R s Selecting a Source
GEORGIA 0-800-555-555 www.samsung.com • Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially UA46F5000 / UA32F5105 /
when children, elderly or disabled people will be left alone in the house). P Power off UA46F5020 / UA40F5100 /
ARMENIA 0-800-05-555 www.samsung.com UA50F5000) UA40F5105 /
- Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat, or cause the Return UA46F5100)
For personal and non-commercial use only. AZERBAIJAN 088-55-55-555 www.samsung.com insulation to deteriorate.
Usage is subject to following the guidelines in the User Manual and UZBEKISTAN 8-10-800-500-55-500 www.samsung.com • Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity, Function menu or
may not be available in all regions. chemical substances or where it will operate for 24 hours a day such as in an airport, a train station, etc. Failure to do so may cause serious damage
KYRGYZSTAN 00-800-500-55-500 www.samsung.com
to your set.
TADJIKISTAN 8-10-800-500-55-500 www.samsung.com • Use only a properly grounded plug and receptacle. VHF/UHF Antenna
MONGOLIA +7-800-555-55-55 www.samsung.com - An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
BELARUS 810-800-500-55-500 www.samsung.com • To turn off the apparatus completely, you must pull the power plug out of the wall socket. Consequently, the power plug should be readily accessible TV Controller
Remote control sensor
at all times. The image is drawn by facing
MOLDOVA 0-800-614-40 www.samsung.com
• Do not allow children to hang onto the product. the front side of the TV. Cable Audio connection Component connection AV connection
ALGERIA 0800 100 100 www.samsung. • Store the accessories (batteries, etc.) in a location safely out of the reach of children.
com/n_africa ✎ To close the Menu, Media Play List, or Source List, press the Controller for more than 1 second. (Analog) Blu-ray player / DVD VCR
• Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to vibration. ✎ When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first, you
PAKISTAN 0800-Samsung (72678) www.samsung.com/pk/ DVD / Home Theater
• Do not drop or impart a shock to the product. If the product is damaged, disconnect the power cord and contact a service center. cannot operate it to move the up/down/left/right directions.
TUNISIA 80-1000-12 www.samsung. • To clean the product, unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such
com/n_africa as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. This may damage the appearance or erase the printing on the
product.
• Do not expose the apparatus to dripping or splashing.
Plug & Play (Initial Setup)
• Do not dispose of batteries in a fire. When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in configuring the TV’s basic settings. Plug the
• Do not short circuit, disassemble, or overheat the batteries. power cord into a wall outlet, and then press the POWER button to turn on the TV. Set the initial setup following instructions that the TV guides.
• not short circuit, disassemble, or overheat the batteries. ✎ If you are not using a cable box or satellite box, make you sure have connected the TV to an Aerial or cable connection before you turn on the TV.
• There is a danger of explosion if you replace the batteries with the wrong type of battery. Replace only with the same or equivalent type. ✎ Connecting the power cord and antenna. (refer to ‘Connections’)
• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

BN68-04908U-00 - English -
-1- -2- -3- -4-

How to use Edit Name Display Modes (HDMI/DVI Input) ❑ Retuning Channels Channel Mode Picture Options Sound Reset
Changing the Input Source Optimal resolution Sound Menu
Edit Name lets you associate a device name to an input source. To Channels will be switched within the favourite or memorised channel list. ■ Colour Tone ■ Reset All: Reset all sound settings to the factory defaults.
access Edit Name, press the TOOLS button in Source List. Name the
4 series:1366 x 768@60Hz / 5 series: 1920 x 1080@60Hz Area ✎ Warm1 or Warm2 will be deactivated when the picture mode is
Source List device connected to the input jacks to make your input source selection Horizontal Vertical Pixel Clock Sync
You can change the desired area.
■ Added Channels: Shows all added channels.
Dynamic.
Mode t Selecting the Sound Mode t
Mode Resolution Frequency Frequency Frequency Polarity 1366 x 768 1920 x 1080 ■ Favourite Ch.: Shows all favourite channels.
Use to select TV or other external input sources such as DVD / Blu-ray easier. (KHz) (Hz) (MHz) (H / V) ■ Size: Your cable box/satellite receiver may have its own set of screen ■ Standard: Selects the normal sound mode. When you set to Dual I-II, the current sound mode is displayed on the
players / cable box / STB satellite receiver connected to the TV. ✎ When connecting a PC to the HDMI IN 2 (DVI) port with HDMI IBM 720 x 400
640 x 480
31.469
35.000
70.087
66.667
28.322
30.240
-/+
-/-
c
c
c
c
Auto Store Fine Tune sizes as well. However, we highly recommend you use 16:9 mode most ■ Music: Emphasizes music over voices. screen.
1. Press the SOURCE button. cable, you should set the TV to PC mode under Edit Name. of the time. Movie: Provides the best sound for movies.
MAC 832 x 624 49.726 74.551 57.284 -/- c c (depending on the country) If the reception is clear, you do not have to fine tune the channel, as this is ■ Audio Type Dual I-II Default
2. Select a desired external input source. ✎ When connecting a PC to the HDMI IN 2 (DVI) port with HDMI 1152 x 870 68.681 75.062 100.000 -/- c
Scans for a channel automatically and stores in the TV. done automatically during the search and store operation. If the signal is 16:9: Sets the picture to 16:9 wide mode. ■ Clear Voice: Emphasizes voices over other sounds.
to DVI cable, you should set the TV to DVI PC mode under Edit 640 x 480 31.469 59.940 25.175 -/- c c Mono Mono Automatic
■ TV / AV / Component / HDMI1 / HDMI2/DVI ✎ Automatically allocated programme numbers may not correspond to weak or distorted, fine tune the channel manually. Wide Zoom: Magnifies the picture size more than 4:3. ■ Amplify: Increase the intensity of high-frequency sound to allow a A2 Stereo Stereo Stereo ↔ Mono change
Name. 640 x 480 37.861 72.809 31.500 -/- c c
✎ You can only choose external devices that are connected to the TV. ✎ When connecting an AV devices to the HDMI IN 2 (DVI) port with 640 x 480 37.500 75.000 31.500 -/- c c actual or desired programme numbers. If a channel is locked, the PIN ✎ Fine tuned channels that have been saved are marked with an asterisk ✎ Adjusts the Position by using ▲, ▼ buttons. better listening experience for the hearing impaired. Dual Dual I ↔ Dual II Dual I
800 x 600 37.879 60.317 40.000 +/+
In the Source List, connected inputs will be highlighted. HDMI to DVI cable, you should set the TV to DVI mode under Edit
c c
input window appears. “*” on the right-hand side of the channel number in the channel Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size. Mono Mono Automatic
Name.
800 x 600 48.077 72.188 50.000 +/+ c c
banner. 4:3: Sets the picture to basic (4:3) mode. Equalizer NICAM Stereo Mono ↔ Stereo change
800 x 600
1024 x 768
46.875
48.363
75.000
60.004
49.500
65.000
+/+
-/-
c
c
c
c Manual Store ✎ To reset the fine-tuning, select Reset. ✎ Do not watch in 4:3 format for a long time. Traces of borders (standard sound mode only) Stereo Mono ↔ Dual I
Information 1024 x 768
1024 x 768
56.476
60.023
70.069
75.029
75.000
78.750
-/-
+/+
c
c
c
c Scans for a channel manually and stores in the TV. displayed on the left, right and centre of the screen may cause ■ Balance: Adjusts the balance between the right and left speaker.
Dual
 Dual II 
Dual I
✎ image retention (screen burn) which are not covered by the
You can see detailed information about the selected external device. VESA DMT 1152 x 864
1280 x 720
67.500
45.000
75.000
60.000
108.000
74.250
+/+
+/+ c
c
c
✎
If a channel is locked, the PIN input window appears.
According to channel source, Manual Store may be supported.
Picture Menu warranty.
■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): ✎ If the stereo signal is weak and an automatic switching, occurs, then
✎ Information only available for the current connected source. 1280 x 800 49.702 59.810 83.500 -/+ c
Screen Fit: Displays the full image without any cut-off when HDMI (720p
Adjusts the level of specific bandwidth frequencies. switch to the mono.
✎ Programme, Colour System, Sound System, Channel, Search, ■ Reset: Resets the Equalizer to its default settings.
1280 x 1024
1280 x 1024
63.981
79.976
60.020
75.025
108.000
135.000
+/+
+/+
c
c Store: If there is abnormal sound or no sound, reselect the sound Mode t / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted. ✎ Only activated in stereo sound signal.
1366 x 768 47.712 59.790 85.500 +/+ c c standard required. ✎ NOTE DTS TruSurround t ✎ This function is available for all input sources.
Select your preferred picture type.
1440 x 900 55.935 59.887 106.500 -/+ c
✎ Channel mode ■ Dynamic: Suitable for a bright room.
 After selecting Screen Fit in HDMI (1080i / 1080p) or Component
1600 x 900RB 60.000 60.000 108.000 +/+ c
(1080i / 1080p) mode: Adjusts the Position or Size by using ▲, ▼, (standard sound mode only)
1680 x 1050
1920 x 1080
65.290
67.500
59.954
60.000
146.250
148.500
-/+
+/+
c
c
 P (Programme): When tuning is complete, the broadcasting stations
in your area have been assigned to position numbers from P0 to
■ Standard: Suitable for a normal environment. ◄, ► button. This function provides a virtual 5.1 channel surround sound experience Setup Menu
P99. You can select a channel by entering the position number in ■ Movie: Suitable for watching movies in a dark room.  Depending on the input source, the picture size options may vary. through a pair of speakers using HRTF (Head Related Transfer Function)
Installing batteries (Battery size: AAA) this mode. ■ Entertain: Suitable for watching movies and games.  The available items may differ depending on the selected mode. technology. Language
Remote Control  C (aerial channel mode) / S (cable channel mode): These two modes ✎ It is only available when connecting a PC.  Settings can be adjusted and stored for each external device
allow you to select a channel by entering the assigned number for connected to an input on the TV.
Auto Volume Set the menu language.
✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.
Backlight / Contrast / Brightness / Sharpness / ✎ Select Language and press the ENTERE button.
each aerial broadcasting station or cable channel.  If you use the Screen Fit function with HDMI 720p input, 1 line will Because each broadcasting station has its own signal conditions, the
Colour / Tint (G/R) be cut at the top, bottom, left and right as in the overscan function. volume may fluctuate each time channel is changed. This feature lets Time
Channel List Option Menu t ■ Digital Clean View: If the broadcast signal received by your TV is weak, you automatically adjust the volume of the desired channel by lowering
Set each channel using the Channel List menu options (Add / Delete, Your television has several setting options for picture quality control.
you can activate the Digital Clean View feature to reduce any static and the sound output when the modulation signal is high or by raising the ✎ The current time will appear every time you press the INFO button.
Add to Favourite / Delete from Favourite, Timer Viewing, Lock / ✎ In analogue TV, AV modes of the PAL system, the Tint (G/R) ghosting that may appear on the screen. sound output when the modulation signal is low. ■ Clock Set: Set the Day, Month, Year, Hour, Minute.
Displays and selects the available video Unlock, Edit Channel Name, Sort, Select All / Deselect All, Auto function is not available. ■ Sleep Timer t
Turns the TV on and off. sources. Store). Option menu items may differ depending on the channel status. ✎ When connecting a PC, you can only make changes to Backlight, ✎ When the signal is weak, try other options until the best picture is SPDIF Output
displayed. Automatically shuts off the TV after a preset period of time. (30, 60,
Set each channel using the Channel List menu options. Option menu Contrast, Brightness and Sharpness. 90, 120, 150 and 180 minutes)
✎ NOTE items may differ depending on the channel status. ✎ Settings can be adjusted and stored for each external device ■ MPEG Noise Filter: Reduces MPEG noise to provide improved picture SPDIF Output is used to provide digital sound, reducing interference
 Use the remote control within 23 feet from TV. quality. going to speakers and various digital devices such as a DVD player. ✎ To cancel Sleep Timer, select Off.
■ Add / Delete: Delete or add a channel to display the channels you connected to the TV.
 Bright light may affect the performance of the remote control. Avoid ■ HDMI Black Level: Selects the black level on the screen to adjust the ■ Audio Format: You can select the Digital Audio output format. The ■ Timer 1 / Timer 2 / Timer 3
Press to directly access to channels.
using nearby special fluorescent light or neon signs. want. ✎ Lowering picture brightness reduces power consumption. screen depth. available Digital Audio output format may differ depending on the input Three different on / off timer settings can be made. You must set the
 The Colour and shape may vary depending on the model. ✎ All deleted channels will be shown on the All Channels menu. Advanced Settings ✎ Available only in HDMI mode (RGB signals). source. clock first.
✎ A gray-Coloured channel indicates the channel has been deleted. ■ Film Mode: Sets the TV to automatically sense and process film signals ✎ By connecting to 5.1ch speakers in a Dolby Digital setup, On Time / Off Time: Set the hour, minute and Activate / Inactivate.
✎ The Add menu only appears for deleted channels. (available in Standard / Movie mode) from all sources and adjust the picture for optimum quality. maximize your interactive 3D sound experience. (To activate the timer with the setting you have chosen, set to
Alternately select Teletext ON, Double, Mix or OFF. Returns to the previous channel.
Channel Menu ✎ Delete a channel from the Added Channels or Favourites menu in Compared to previous models, new Samsung TVs have a more precise ✎ Available in TV mode, AV, COMPONENT (480i / 1080i) and HDMI ■ Audio Delay: Correct audio-video sync problems, when watching TV Activate.)
Cuts off the sound temporarily. the same manner. picture. (480i / 1080i). or video, and when listening to digital audio output using an external Volume: Set the desired volume level.
■ Add to Favourite / Delete from Favourite t: Set channels you ■ Dynamic Contrast: Adjusts the screen contrast. device such as an AV receiver (0ms ~ 250ms).
Adjusts the volume.
❑ Seeing Channels watch frequently as favourites ■ Black Tone: Select the black level to adjust the screen depth.
■ LED Clear Motion: Removes drag from fast scenes with a lot of
movement to provide a clear picture.
Contents: When the On Time is activated, you can turn on a specific
channel or play back contents such as photo or audio files.
Changes channels. Speaker Select
Channel List ■ Timer Viewing: You can set a desired channel to be displayed ■ Flesh Tone: Emphasize pink “Flesh Tone”. ■ Analogue Clean View: Reduces diagonal noise in picture caused by − TV/USB: Select TV or USB. (Make sure that an USB device is
automatically at the set time; even when you are watching another ■ Colour Space: Adjusts the range of colours available to create the the crosstalk of signals. A sound echo may occur due to a difference in decoding speed between connected to your TV.)
Displays the main on-screen menu. Select a channel in the All Channels, Added Channels, Favourites or
Displays the channel list on the screen. channel. Set the current time first to use this function. image. the main speaker and the audio receiver. In this case, set the TV to − Antenna: Displays the current antenna source.
Views the Media Play. HDMI Selects the HDMI mode directly. Programmed screen by pressing the ▲/▼ buttons, and pressing the
■ Edit Channel Name: Assign your own channel name. ■ White Balance: Adjust the colour temperature for a more natural Picture Reset External Speaker. − Channel: Select the desired channel.
ENTERE button. Then you can watch the selected channel.
■ Sort: This operation allows you to change the programme numbers of picture. Resets your current picture mode to its default settings. ✎ When you set Speaker Select to External Speaker, the TV’s − Music/Photo: Select the folder containing MP3/JPEG files on the
Quickly select frequently used functions. Displays information on the TV screen. ■ All Channels: Shows all currently available channels. speakers are turned off. You will hear sound through the external
the stored channels. This operation may be necessary after using the R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) ■ Reset Picture Mode: Returns all picture values in the currently selected USB device.
■ Added Channels: Shows all added channels. auto store. darkness. speakers only. When you set Speaker Select to TV Speaker both ✎ The maximum displayed number of files, including sub folders, in
Selects the on-screen menu items and changes the mode to the default settings. the TV’s speakers and the external speakers are on. You will hear
■ * Favourites: Shows all favourite channels. ■ Lock / Unlock: Lock a channel so that the channel cannot be selected R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) one folder of USB storage device is 2000.
values seen on the menu. sound through both.
■ Programmed: Shows all currently reserved Programmes. and viewed. brightness. ✎ The media may not be playing smoothly when using the device
Returns to the previous menu. Exit the menu.
✎ Using the remote control buttons with the Channel List ✎ This function is available only when the Channel Lock is set to On. Reset: Resets the White Balance to its default settings.
✎ When Speaker Select is set to External Speaker, the volume lower than USB 2.0.
and MUTE buttons will not operate and the sound settings will be
 Green (Zoom): Enlarges or shrinks a channel number. ✎ The PIN input screen appears. Enter your 4-digit PIN, the default of ■ Gamma: Adjusts the primary colour intensity. limited.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
A B C D Use these buttons according to the direction  Yellow (Select): Selects multiple channel lists. Select desired channels which is “0-0-0-0”. Change the PIN using the Change PIN option. ■ Motion Lighting: Reduce power consumption by brightness control ✎ If there is no video signal, both speakers will be mute.
Manual to set at your convenience. If you select Manual, you can set
SPORTS on screen. and press the Yellow button to set all the selected channels at the same ■ Select All / Deselect All: You can select or deselect all channels in the up the day you want to activate the timer.
P.MODE: Selects the picture mode. P.MODE P.SIZE adapted motion.
time. The c mark appears to the left of the selected channels. channel list.
P.SIZE: Selects the picture size. Use these buttons in a specific feature.
 T (Tools): Displays the Channel List option menu. (The Options menus ■ Auto Store: Scans for a channel automatically and stores in the TV. ✎ Only available in Standard mode.
: Sports Mode on or off.
may differ depending on the situation.)
Channel Status Display icons
Icons Operations
c A channel selected.
* A channel set as a favourites.
\ A locked channel.
) A reserved programme.

-5- -6- -7- -8-

[UF4000-UF5000-AR]BN68-04908U-00ENG.indd 1 2013-11-01 11:13:58

 POWER

P
Security • The maximum supported JPEG resolution is 15360 x 8640 pixels.  Supported Video Formats ■ Photos Category Operation Videos Music Photos
Other Information 2. Remove the screws from the back Centre of the TV, put the screws
Application Menu • If a file is corrupted or the TV does not support the file type, the “Not File Frame 1. Press the ◄ or ► button to select Photos, then press the ENTERE Stop Slide Show into the clamps, and then fasten the screws onto the TV again.
✎ The PIN input screen appears before the setup screen. Supported File Format” message appears. Extension
Container Video Codec Resolution
rate(fps)
Bit rate(Mbps) Audio Codec
button in the Media Play menu. / Start Slide You can start or stop a Slide Show. c ✎ Screws may not be supplied with the product. In this case, please
✎ Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the • If a USB extension cable is used, the USB device may not be DivX 3.11/4.x/5.1/6.0 1920x1080 6~30 30Mbps
2. Press the ◄/►/▲/▼ buttons to select the desired photo in the file list.
Show
Installing the Wall Mount purchase the screws of the following specifications.
PIN using the Change PIN option. ❑ Using the Media Play recognized or the files on the device may not be read. *.mp4 MP4
H264 1920x1080 6~30 30Mbps MP3 / ADPCM Slide Show You can select the slide show speed
c 3. Connect the clamps fixed onto the TV and the clamps fixed onto the
 Channel Lock: Lock channels in Channel List, to prevent
AVC 1920x1080 6~30 30Mbps / AAC 3. Press the ENTERE button or (Play) button. Speed during the slide show. The wall mount kit (sold separately) allows you to mount the TV on
Enjoy photos, music and/or movie files saved on a • The TV cannot play MP3 files with DRM that have been downloaded MJPEG 640x480 6~30 10Mbps
the wall. For detailed information on installing the wall mount, see the wall with a strong cable and then tie the string tightly.
unauthorized users, such as children, from watching unsuitable USB Mass Storage Class (MSC) device. from a for-pay site. Digital Rights Management (DRM) is a
✎ NOTE Background You can set and select background music
c
programme. MEDIA.P *.avi "AVI
DivX 3.11/4.x/5.1/6.0
MPEG4 SP / ASP
1920x1080
1920x1080
6~30
6~30
30Mbps
30Mbps
MP3 / AC3 /
 While a photo list is displayed, press the (Play) / ENTERE button Music when watching a Slide Show. instructions provided with the wall mount. Contact a technician for ✎ Note
technology that supports the creation, distribution, and management LPCM / ADPCM You can zoom into images in full screen assistance when installing the wall mount bracket.  Install the TV near to the wall so that it does not fall backwards.
✎ Only available when the Input source is set to TV. *.mkv" MKV" H264 1920x1080 6~30 30Mbps on the remote control to start the slide show. Zoom c
of digital content in an integrated and comprehensive way, including MJPEG 640x480 6~30 10Mbps
/ DTS Core mode.
 It is safe to connect the string so that the clamps fixed on the wall
 Change PIN: Change your password required to set up the TV. protecting the rights and interests of content providers, preventing  All files in the file list section will be displayed in the slide show. Rotate You can rotate images in full screen mode. c Samsung Electronics is not responsible for any damage to the product
DivX 3.11 / 4.x /5.1 / 6.0 1920x1080 6~30 30Mbps MP3 / AC3 /
or injury to yourself or others if you elect to install the TV on your own. are equal to or lower than the clamps fixed on the TV.
✎ If you forget the PIN code, press the remote control buttons in illegal copying of contents, and managing billings and settlements.
*.asf
ASF MPEG4 SP / ASP 1920x1080 6~30 30Mbps LPCM /ADPCM /  During the slide show, files are displayed in order. You can see detailed information about
the following sequence in Standby mode, which resets the PIN to • PTP device is not supported.
*.wmv
H.264 1920x1080 6~30 30Mbps WMA / WMA Pro
 During the slide show, you can adjust the slide show speed using ( )
Information
the played file. c c c  Untie the string before moving the TV.
Connecting a USB Device *.ts
(REW) or ( ) (FF) button.
Wall Mount Kit Specifications (VESA) 4. Verify all connections are properly secured. Periodically check
“0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on). • If an over-power warning message is displayed while you are
MPEG2 1920x1080 6~30 30Mbps AC3 / AAC / ■ Settings
connecting or using a USB device, the device may not be
*.trp
*.tp
TS MP3 / DD+ /
 You can move to other file using ◄ or ► button. ✎ The wall mount kit is not supplied, but sold separately. connections for any sign of fatigue for failure. If you have any doubt
1. Turn on your TV. Using the Setup Menu
Eco Solution recognized or may malfunction.
*.m2ts
H. 264 BP / MP / HP 1920x1080 6~30 30Mbps HE-AAC
✎ Music files can be automatically played during the Slide Show if the  DivX® Video On Demand: Shows the registration code authorized for
Install your wall mount on a solid wall perpendicular to the floor. When about the security of your connections, contact a professional
2. Connect a USB device containing photo, music and/or movie files to *.dat MPEG1 1920x1080 24/25/30 30Mbps attaching to other building materials, please contact your nearest dealer. installer.
■ Energy Saving t: This adjusts the brightness of the TV in order the USB jack on the side of the TV. • If the TV has no input during the time set in Auto Protection Time, *.mpg AC3 / MPEG / Background Music is set to On. the TV. If you connect to the DivX web site and register with 10-digit
PS MPEG2 1920x1080 24/25/30 30Mbps
If you install the TV on a ceiling or slanted wall, it may fall and result in
to reduce power consumption. If you select Picture Off, the screen is 3. When USB is connected to the TV, you can select Media Play. the Screensaver will run. *.mpeg
*.vob H. 264 BP / MP / HP 1920x1080 6~30 30Mbps
LPCM / AAC
✎ The Mode in Background Music cannot be changed until the BGM registration code, you can download the VOD activation file. Once you severe personal injury. Kensington Lock
turned off, but the sound remains on. Press any button except volume • The power-saving mode of some external hard disk drives may be has finished loading. play it using Media Play, the registration is completed.
*.3gp 3GPP
MPEG4 SP / ASP 1920x1080 6~30 30Mbps
MP3 ✎ NOTE The Kensington Lock is not supplied by Samsung. It is a device used
button to turn on the screen. Using the Media Play Menu released automatically when your connect them to the TV.
flash
H.264
H.264
1920x1080
1920x1080
6~30
6~30
30Mbps
30Mbps
 Supported Photo Formats ✎ For more information on DivX® VOD, visit http://vod.divx.com. • Standard dimensions for wall mount kits are shown in the table to physically fix the system when using it in a public place. Refer to the
■ Eco Sensor For 5 series : To enhance your power savings; the • If a USB device connected to the TV is not recognized, the list of *.flv MP3 Image Photo Resolution  Device Format For 4100 / 4105 / 5100 / 5105 models
1. Press the MENU button. Press the ▲ or ▼ button to select formats Sorenson H.263 1920x1080 6~30 30Mbps below. manual provided with the Kensington Lock for additional information on
picture settings will automatically adapt to the light in the room. files on the device is corrupted, or a file in the list is not played, Base-line 15360 x 8704 : Format the Storage Media.
Application, then press the ENTERE button. connect the USB device to a PC, format the device, and check the
JPEG • When purchasing our wall mount kit, a detailed installation manual proper use.
✎ If you adjust the Backlight, the Eco Sensor will be set to Off. Progressive 1024 x 768
 Information: Select to view information on the connected device. and all parts necessary for assembly are provided. ✎ Please find a “K” icon on the rear of the TV. The Kensington slot is
Min. Backlight: When Eco Sensor is On, the minimum screen 2. Press the ▲ or ▼ button to select Media Play (USB), then press the connection. Other Restrictions ■ Other Restrictions
ENTERE button. • Do not use screws that do not comply with the VESA standard beside the “K” icon.
• If a file you deleted from the PC is still found when you run Media
brightness can be adjusted manually.
3. Press the ◄ or ► button to select an icon (Videos, Music, Photos, Play, use the “Empty the Recycle Bin” function on the PC to  Video content will not play, or not play correctly, if there is an error in the CMYK, YCCK Colour space JPEG are not supported. ❑ Using the Sports Mode screw specifications. ✎ The position and colour may differ depending on the model.
✎ If Eco Sensor is On, the display brightness may change (become content or the container. ■ Playing Multiple Files • Do not use screws longer than the standard dimension, as they To lock the product, follow these steps:
slightly darker in most cases) depending on the surrounding light Settings), then press the ENTERE button. permanently delete the file. Sports Mode t
 Sound or video may not work if the contents have a standard bit rate/ Playing selected video/music/photo files may cause damage to the inside of the TV set.
intensity. ✎ It might not work properly with unlicenced multimedia files. • Photos only supports sequential jpeg format.
frame rate above the compatible Frame/sec listed in the table above.
1. Wrap the Kensington lock cable around a large, stationary object
1. Press the Yellow button in the file list to select the desired file. This mode provides optimised condition for watching sports games. • For wall mounts that do not comply with the VESA standard screw such as desk or chair.
■ No Signal Power Off: To avoid unnecessary energy consumption, set ✎ If you want to view detailed information of the file or connected • The scene search and thumbnail functions are not supported in the
 If the Index Table is in error, the Seek (Jump) function is not supported. specifications, the length of the screws may differ depending on
how long you want the TV to remain on if it’s not receiving a signal. device, press TOOLS button in the file list, and then select Detailed Videos. 2. Repeat the above operation to select multiple files. ✎ When Sports Mode is On, the picture and sound modes are set to the wall mount specifications.
2. Slide the end of the cable with the lock attached through the looped
Information or Device Information. • If the number of files and folders saved on a USB storage device is
 The menu may take longer to appear if the video’s bit rate exceeds Stadium automatically. end of the Kensington lock cable.
✎ Disabled when the PC is in power saving mode. 10Mbps. ✎ NOTE • Do not fasten the screws too firmly. This may damage the product
■ Auto Power Off: The TV will be automatically turned off when no user ✎ Need-to-Know List before using Media Play (USB) approximately over 4000, the files and folders may not appear and  The c mark appears to the left of the selected files. ✎ If you turn the TV off while watching Sports Mode, the Sports Mode or cause the product to fall, leading to personal injury. Samsung is
3. Insert the locking device into the Kensington slot on the product.
some folders may not be opened.  Video content can not be played, if there are many contents in one file. will be disable.
operation is received for 4 hours. • Supported file systems are FAT and NTFS.  To cancel a selection, press the Yellow button again. 4. Lock the lock.
not liable for these kinds of accidents.
• Certain types of USB Digital camera and audio devices may not • The maximum displayed number of files, including sub folders, in
Video Decoder  To deselect all selected files, press the TOOLS button and select • Samsung is not liable for product damage or personal injury when ✎ These are general instructions. For exact instructions, see the User
Auto Protection Time be compatible with this TV. one folder of USB storage device is 2000. Deselect All. Support Menu a non-VESA or non-specified wall mount is used or the consumer manual supplied with the locking device.
• Media Play only supports USB Mass Storage Class (MSC) • The media may not be playing smoothly when using the device Supports up to H.264, Level 4.1
✎ The locking device has to be purchased separately.
■ Auto Protection Time: If the screen remains idle with a still image 3. Press the TOOLS button, and then select Play Selected Contents. fails to follow the product installation instructions.
devices. MSC is a Mass Storage Class Bulk-Only Transport lower than USB 2.0. H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
for a certain period of time defined by the user, the screen saver is • The file name only works in supported menu language. The other
■ Playing the video/music/photo file group
Self Diagnosis • Do not mount the TV at more than a 15 degree tilt. ✎ The location of the Kensington slot may be different depending on
device. Examples of MSC are Thumb drives and Flash Card MPEG4 SP, ASP :
the TV model.
activated to prevent the formation of ghost images on the screen. language is not displayed properly. While a file list is displayed, move to any file in desired group. • Always have two people mount the TV on a wall.
Readers. Devices should be connected directly to the TV’s – Below 1280 x 720: 60 frame max
■ Picture Test: Use to check for picture problems. If the problem
General USB port. (LED 4000, 4001, 4020 series 32" : USB HDD is not ■ Videos – Above 1280 x 720: 30 frame max ■ Copying the files to the other USB device
continues to occur, check the colour pattern. Product VESA scew hole specs Standard Caution of the cover-jack
supported.) 1. Press the ◄ or ► button to select Videos, then press the ENTERE H.263 is not supported. For 4100 / 4105 / 5100 / 5105 models Family
Models
(A * B) in millimeters Screw
Quantity
■ Game Mode: When connecting to a game console such as • Before connecting your device to the TV, please back up your files 1. Press the Yellow button in the file list to select the desired file. ■ Sound Test: Use the built-in melody sound to check for sound
button in the Media Play menu. GMC is not support. Caution: The cover-jack is for use by qualified service personnel
PlayStation™ or Xbox™, you can enjoy a more realistic gaming to prevent them from damage or loss of data. SAMSUNG is not problems. UA32F4000 / UA32F4001 /
2. Press the ◄/►/▲/▼ buttons to select the desired video in the file list. Audio Decoder 2. When you press the green button, the selected files copy to the other UA32F4100 / UA32F4020 / only. To reduce the risk of electric shock or fire hazard, do not
experience by selecting the game mode. responsible for any data file damage or data loss. USB device. ■ Reset: Reset all settings to the factory defaults. UA32F4105 / UA32F5000 / use the cover jack, unless you are qualified to do so.
 Precautions and limitations for game mode 3. Press the ENTERE button or (Play) button. ✎ The PIN input screen appears before the setup screen. UA32F5100 / UA32F5105 /
200 X 200
Caution
• A USB device that requires high power may not be supported. Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO
- The selected file is displayed on the top with its playing time. ✎ Available only when both USB devices are connected to the TV. LED-TV UA40F5000 / UA40F5020 / M8 4 TV Rear Panel
− To disconnect the game console and connect another external (LED 4000, 4001, 4020 series 32" : 0.5A) WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is not ✎ The FAT32 file system cannot copy the file which size is more than ✎ Enter your 4-digit PIN. Change the PIN using the Change PIN
device, set Game Mode to Off in the setup menu. (LED 5 series / LED 4100, 4105, 5100, 5105 models 32" and - If video time information is unknown, playing time and the progress supported) option.
UA40F5100 / UA40F5105

bar are not displayed. 4GB.

− If you display the TV menu in Game Mode, the screen shakes above: 1A) WMA Lossless is not supported. UA46F5000 / UA46F5020 /
400 X 400
slightly. • Do not disconnect the USB device while it is loading. - During video playback, you can search using the ◄ and ► button. USB Support File System Software Upgrade UA46F5100 / UA50F5000

 Game Mode is not available in TV mode. • The higher the resolution of the image, the longer it takes to - You can use ( ) (REW) and ( ) (FF) buttons during playback. ■ Music
Play (Read) NTFS, FAT, FAT32
Software Upgrade can be performed by downloading the latest firmware
Copy & Delete FAT, FAT32
 After connecting the game console, set Game Mode to On display on the screen. ✎ In this mode, you can play movie clips contained in a game, but you 1. Press the ◄ or ► button to select Music, then press the ENTERE Format FAT32 Only from “www.samsung.com” to a USB memory device. Cover-jack
cannot play the game itself. Do not install your Wall Mount
to prevent poor picture quality. Unfortunately, you may notice button in the Media Play menu. Kit while your TV is turned on.
reduced picture quality.  Supported Subtitle Formats
2. Press the ◄/►/▲/▼ buttons to select the desired Music in the file list.
■ Media Play - Additional Functions HD Connection Guide It may result in personal injury
■ Melody: Set so that a melody plays when the TV is turned Off, Low, - External Videos/Music/Photos Play Option menus
Refer to this information when connecting external devices to the TV. due to electric shock.
Medium and High. 3. Press the ENTERE button or (Play) button. When playing a file, press the TOOLS button.
Name File extension
✎ The Melody does not play. MPEG-4 timed text .ttxt
✎ During music playback, you can search using the ◄ and ► button. Category Operation Videos Music Photos Contact Samsung ✎ The rear panel may differ depending on the model.
− When no sound is output from the TV because the MUTE ✎ (REW) and (FF) buttons do not function during play.
SAMI .smi
✎ Only displays the files with MP3 file extension. Other file extensions are
Title You can move the other file directly. c
View this information when your TV does not work properly or when you Securing the TV to the Wall
button has been pressed. SubRip .srt You can play movie and music files
SubViewer .sub not displayed, even if they are saved on the same USB device. Repeat Mode c c want to upgrade the software. You can find information regarding our call
− When no sound is output from the TV because the volume has repeatedly.
Micro DVD .sub or .txt ✎ If the sound is abnormal when playing MP3 files, adjust the Equalizer You can adjust the picture size to your centres, and how to download products and software. Caution: Pulling, pushing, or climbing onto the TV may cause
been reduced to minimum with the VOL – button. Picture Size c
SubStation Alpha .ssa in the Sound menu. (An over-modulated MP3 file may cause a sound preference. the TV to fall. In particular, ensure that your children do not hang
− When the TV is turned off by Sleep Timer function. Advanced SubStation Alpha .ass Picture Mode You can adjust the picture setting. c c over or destabilize the TV; doing so may cause the TV to tip over,
problem.)
resulting in serious injuries or death. Follow all safety precautions
- Internal Sound Mode You can adjust the sound setting. c c c
provided on the included Safety Flyer. For added stability, install
You can play the video with Subtitles. This
Name Container Format Subtitle Setting function only works if the subtitles are the c the anti-fall device for safety purposes, as follows.
Xsub AVI Picture Format same file name as the video.
SubStation Alpha MKV Text Format Audio Format
You can select the digital audio output
c
To prevent the TV from falling
Advanced SubStation Alpha MKV Text Format format. ✎ Since the necessary clamps, screws, and string are not supplied,
SubRip MKV Text Format You can change the audio language if the please purchase these additionally.
Audio Language
video has more than one language. c
MPEG-4 Timed text MP4 Text Format
1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
✎ You may need additional material such as an anchor depending on
the type of wall.
✎ Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.

-9- - 10 - - 11 - - 12 -

Troubleshooting Storage and Maintenance

Problem Possible Solution
Specifications
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com,” then click RF(Cable/Antenna) Connection ✎ If you remove the attached sticker on the TV screen, clean the residues and then watch TV.
on Support, or contact the call centre listed on the back-cover of this manual. The TV is not receiving all channels.  Make sure the Antenna cable is connected securely.
 Please try Setup (Initial setup) to add available channels to the channel list. Go to MENU - System - Setup (Initial setup) and Environmental Considerations
Problem Possible Solution wait for all available channels to be stored.
 Verify the Antenna is positioned correctly.
Operating Temperature 10°C to 40°C (50°F to 104°F)
Picture Quality Operating Humidity 10% to 80%, non-condensing
The TV image does not look as good as it  If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD The picture is distorted: macroblock error,  Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action Storage Temperature -20°C to 45°C (-4°F to 113°F)
did in the store. (high definition) picture quality. small block, dots, pixelization movies.
Storage Humidity 5% to 95%, non-condensing
 Cable/Satellite subscribers: Try HD stations from the channel line up.  A low signal can cause picture distortion. This is not a TV issue.
 Antenna connection: Try HD stations after performing Auto tuning. PC Connection Model Name UA32F4000 / UA32F4001 / UA32F4100 / UA32F4105 UA32F4020
Do not spray water directly onto the product. Any liquid that goes into the Clean the product with a soft cloth dampened with in a small amount of water.
✎ Many HD channels are up scaled from SD(Standard Definition) contents. A “Mode Not Supported” message  Set your PC’s output resolution so it matches the resolutions supported by the TV. product may cause a failure, fire, or electric shock. Do not use a flammable liquid (e.g. benzene, thinners) or a cleaning agent.
 Adjust the Cable/Set top box video output resolution to 1080i or 720p. Display Resolution 1366 x 768
appears.
 Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal. Screen Size 81 cm
The video is OK but there is no audio.  If you are using a HDMI connection, check the audio output setting on your PC.
The picture is distorted: macroblock error,  Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action Sound
Others
small block, dots, pixelization movies. Output 10W x 2
 Low signal level or bad quality can cause picture distortion. This is not a TV issue. The picture will not display in full screen.  HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
 Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV. Dimensions (W x H x D)
 Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.
 Adjust the picture size options on your external device or TV to full screen. Securing the Installation Space Body 73.7 X 44.0 X 4.9 (cm) 73.7 X 44.0 X 4.9 (cm)
Colour is wrong or missing.  If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or With Stand (Square)* 73.7 X 50.9 X 19.1 (cm) -
loose connections may cause colour problems or a blank screen. The remote control does not work.  Replace the remote control batteries with the poles (+/–) in the right direction. Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. With stand (Round)* 73.7 X 48.7 X 25.2 (cm) 73.7 X 48.7 X 25.2 (cm)
 Clean the transmission window located on the top of the remote control. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
There is poor colour or brightness.  Adjust the Picture options in the TV menu. (go to Picture mode / Colour / Brightness / Sharpness) Weight
 Try pointing the remote directly at the TV from 5~6 feet away. ✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
 Adjust Energy Saving option in the TV menu. (go to MENU - Setup -Eco Solution - Energy Saving) Without Stand 5.2 kg 5.2 kg
 Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset) The cable/set top box remote control  Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the  If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
does not turn the TV on or off, or adjust SAMSUNG TV code. ✎ The appearance may differ depending on the product. With Stand (Square)* 5.7 kg -
There is a dotted line on the edge of the  If the picture size is set to Screen Fit, change it to 16:9. the volume. ✎ Be careful when you contact the TV because some parts can be somewhat hot. With stand (Round)* 5.6 kg 5.6 kg
screen.  Change cable/satellite box resolution.
A “Mode Not Supported” message  Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. Refer to resolution Installation with a stand. Installation with a wall-mount. UA32F5000 / UA32F5100 / UA40F5000 / UA40F5020 / UA46F5000 / UA46F5020 /
The picture is black and white.  If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV. appears. settings in this manual. Model Name UA50F5000
UA32F5105 UA40F5100 / UA40F5105 UA46F5100
When changing channels, the picture  If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box There is a plastic smell from the TV.  This smell is normal and will dissipate over time. 10 cm 10 cm Display Resolution 1920 x 1080
freezes or is distorted or delayed. reboots. It may take up to 20 minutes. 10 cm
TV is tilted to the right or left side.  Remove the stand base from the TV and reassemble it. 10 cm 10 cm 10 cm
 Set the output resolution of the cable box to 1080i or 720p. Screen Size 81 cm 102 cm 117 cm 126 cm
Sound Quality There are difficulties assembling the stand  Make sure the TV is placed on a flat surface. It is necessary to use magnetized screw driver if you cannot remove the screws Sound
base. from the TV.
There is no sound or the sound is too low at  Please check the volume the of external device connected to your TV. Output 10W x 2
10 cm
maximum volume. The Broadcasting menu is grey out  The Broadcasting menu is only available when the TV source is selected. Dimensions (W x H x D)
(unavailable).
The picture is good but there is no sound.  Set the Speaker Select option to TV Speaker in the sound menu. Body 73.8 X 44.5 X 4.9 (cm) 92.8 X 55.2 X 4.9 (cm) 105.9 X 62.6 X 4.9(cm) 113.5 X 66.8 X 4.9 (cm)
 If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV. Your settings are lost after 30 minutes or  If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. If you want to change the settings With stand 73.8 X 50.5 X 19.1 (cm) 92.8 X 61.2 X 23.5 (cm) 105.9 X 68.6 X 23.5 (cm) 113.5 X 72.7 X 23.5 (cm)
every time the TV is turned off. from Store Demo mode to Home Use, press the SOURCE button to select TV mode, and go to MENU → Support → Use
 If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s
audio option to HDMI when you have a HDMI connected to your TV).
Mode. License Weight
 If you are using a HDMI cable, a separate audio cable is required.
Without Stand 5.0 kg 8.0 kg 10.8 kg 13.0 kg
You have intermittent loss of audio or video.  Check the cable connections and reconnect them.
 If your TV has a headphone jack, make sure there is nothing plugged into it. With Stand 5.6 kg 9.5 kg 12.3 kg 14.5 kg
 Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long
term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.
The speakers are making an inappropriate  Check the cable connections. Make sure a video cable is not connected to an audio input. DivX Certified® to play DivX® video up to HD 1080p, including premium content. ✎ Design and specifications are subject to change without prior notice.
noise.  For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion. You see small particles when you look  This is part of the product’s design and is not a defect. ✎ For information about the power required and more about power consumption, refer to the label attached to the product.
closely at the edge of the frame of the TV. ✎ * The option may differ depending on country.
No Picture, No Video ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit
The TV will not turn on.  Make sure the AC power cord is securely plugged in to the wall outlet and the TV. There are recurrent picture/sound issues.  Check and change the signal/source. divx. com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in
order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx.com
 Make sure the wall outlet is working. A reaction may occur between the rubber  To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture. for more information on how to complete your registration. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 DivX®, DivX
 Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “The cushion pads on the base stand and the Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
remote control does not work” below. top finish of some furniture.
The TV turns off automatically.  Ensure the Sleep Timer is set to Off in the Time menu. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
 If your PC is connected to the TV, check your PC power settings. ✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or
 Make sure the AC power cord is plugged in securely to the wall outlet and the TV. dark pixels on the screen. These pixels will have no impact on the performance of the product.
 When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal. ✎ You can keep your TV as optimum condition upgrading the latest firmware on web site (www.samsung.com → Support) by USB. Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567,
7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS
There is no picture/video.  Check cable connections (remove and reconnect all cables connected to the TV and external devices). Premium Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
 Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477, 5,319,713, 5,333,201, 5,638,452, 5,771,295, 5,970,152, 5,912,976,
For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV. 7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474, 7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol together are
 Make sure your connected devices are powered on. registered trademarks & DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
 Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.

Open Source License Notice

In the case of using open source software, Open Source Licenses are available on the product menu. Open Source License Notice is written only English.

- 13 - - 14- - 15 - - 16 -

[UF4000-UF5000-AR]BN68-04908U-00ENG.indd 2 2013-11-01 11:14:01