* C16-C-304
6225
BOARD DIPLOMA EXAMINATIONS
SEPTEMBER/OCTOBER - 2020
DCE – THIRD SEMESTER
SURVEYING-II
Time: 3 hours Max. Marks: 80
PART – A 3 X 10 = 30
Instructions: 1. Answer all questions.
2. Each question carries Three Marks.
3. Answer should be brief and straight to the point and should
not exceed Five simple sentences.
1. Write any 2 described relation between fundamental lines of theodolite?
2. The algebraic sum of latitude and departures of a closed traverse were -1.5m
and 0.9m respectively, find the length and direction of closing error.
3. What is meant by face left and face right of theodolite? How do you change
of face.
4. Name the instruments used in trigonometrical leveling and state their
functions.
5. In order to determine the R.L of the top of a tower the theodolite was set up
at a distance of 27m from tits base. The vertical angle measured to the top of
* the chimney was 220. The back sight taken on a nearby B.M. of R.L
132.500m was 0.825m.Determine the R.L of the top of the tower.
6. What is meant by tacheometry? List the instruments needed for
Tacheometry?
7. What are the advantages of Tacheometry?
8. Define the following terms
a) Point of tangency b) Forward Tangent c) Point of intersection
9. List different methods of curve setting by linear methods using chain and
tape.
10. State any six components of total station.
* [Cont..,
1
www.manaresults.co.in
*
PART – B 5 X 10 = 50
Instructions: 1. Answer any Five questions
2. Each question carries TEN Marks.
3. Answer should be comprehensive and criteria for
valuation is the content but not the length of the answer.
11. Explain briefly the steps involved in Temporary adjustments of a
theodolite.
12. a) Define the terms Latitude and Departure.
b) Explain the method of prolonging a straight line with a theodolite.
13. The following observations were made to determine the elevation of
top of a chimney ‘P’. Find the R.L of the point P.
Instruments Sight to Vertical Remarks
at Angle
A P 260 32’ Staff reading on B.M 0.655
B P 160 15’ Staff reading on BM 0.825
R.L of BM is 137.00
Distance AC=22.0m
14. A tacheometer was set up at an intermediate station R on the line PQ
and the following reading were obtained.
* Staff Station Vertical Angle Staff Readings
P -40 33’ 0.535 1.620 2.915
Q +30 16’ 1.015 1.825 2.830
The instrument was fitted with an anallatic lens and has a constant of
100. Find the gradient of the line joining station P and Q.
* [Cont..,
2
www.manaresults.co.in
15. The following observation were made on a vertically held staff with a
*
tacheometer set up at an intermediate point on a straight line PQ.
Staff Vertical Staff Axial Hair Reading
Station Angle intercept(m) (m)
P -6023’ 2.540 2.225
Q -7042’ 1.315 2.530
The instruments was fitted with an anallatic lens and has a constant of
100. Compute the horizontal length PQ and the R.L of Q given that P
has a R.L of 235.20m.
16. Two straight intersect at a chainage 1220 m and the angle of
intersection is 1100. If the radius of the simple curve to be introduced is
600m. Find
i)Tangent distance ii) Chainage at point of commecenment
iii) Changing at point of tangency iv) Length of Long Chord
v) Mid ordinate
17. Two tangents intersects at point B of chainage 380.00 m, the deflection
angle being 360. Calculate all the data necessary for setting out a
simple circular curve with radius of 300m by Rankine’s method of
deflection angle. Take peg interval 30m.
18. Explain resection method using total station.
*
*
3
www.manaresults.co.in
