Scribd
Upload
60 views2 pages

Painting Specification

The document outlines the general specifications for the external protection of offshore and coastal structures through painting, including supplier coding and types of paint binders. It details surface preparation requirements, including cleanliness grades and roughness, along with specific coating systems and their respective non-dry film thickness (NDFT). Additionally, it specifies guarantee and qualification requirements for the coatings used.

Uploaded by

Goodhead
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
60 views2 pages

Painting Specification

The document outlines the general specifications for the external protection of offshore and coastal structures through painting, including supplier coding and types of paint binders. It details surface preparation requirements, including cleanliness grades and roughness, along with specific coating systems and their respective non-dry film thickness (NDFT). Additionally, it specifies guarantee and qualification requirements for the coatings used.

Uploaded by

Goodhead
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

General Specification GS EP COR 350

External protection of offshore and coastal structures and equipment by


painting

Rev.: 13 Effective date: 11/2016 Page: 22 of 54

Appendix 3

Appendix 3 Suppliers' systems

Coding for Suppliers


Suppliers Code
CARBOLINE C
HEMPEL H
JOTUN J
PPG P

Coding for type of paint


Binders Codes Remarks
Zinc ethyl silicate ESI
Rich Zinc epoxy EPRZ
Epoxy EP
Phenolic Epoxy EPPH
Ester Epoxy EPES
Glass flake Epoxy EPGF
Polyurethane PUR
Silicone SI
Vinyl-ester VY
Novolac Epoxy EPN
Glass flake Novolac Epoxy EPNGF

This document is the property of TOTAL S.A., it contains confidential information which may not be disclosed to any third party,
reproduced, stored or transmitted without the prior written consent of TOTAL S.A.
The information contained in this document does not substitute for applicable laws and regulations.
General Specification GS EP COR 350

External protection of offshore and coastal structures and equipment by


painting

Rev.: 13 Effective date: 11/2016 Page: 23 of 54

Appendix 3

P 01
Surface preparation: Surface preparation for repair:
Grade of cleanliness: Sa 3 (ISO 8501-1) Grade of cleanliness: Sa 2 ½ (ISO 8501-1)
Roughness: Grit-medium (G) (ISO 8503-2) Roughness: Grit-medium (G) (ISO 8503-2)

System Supplier’s NDFT Repair Supplier’s NDFT


Coat Binder Coat Binder General note
code reference (μm) system reference (μm)

1 ESI Carbozinc 11 60 1 EPRZ Carbozinc 858 60


Carboguard
2 EP 30 2 EP Carboguard 893SG 40
893SG
Repair
P01C 3 EP Carboguard 893 150 3 EP Carboguard 893 150
P01C
Carbothane 134 Carbothane 134
4 PUR 50 4 PUR 50
series series
Total NDFT: 290 Total NDFT: 300

Avantguard 750
1 ESI Galvosil 1570 60 1 EPRZ 60
(1736G)
2 EP Hempadur 1557 30 2 EP Hempadur 1557 40
Repair
P 01 H 3 EP Hempadur 4588 150 3 EP Hempadur 4588 150
P01H
Hempathane HS Hempathane HS
4 PUR 50 4 PUR 50
5561 5561
Total NDFT: 290 Total NDFT: 300

1 ESI Resist 86 60 1 EPRZ Barrier plus 60


Penguard Tie coat Penguard Tie coat
2 EP 30 2 EP 40
100 100
Repair
P 01 J
3 EP Penguard universal 150 P01J 3 EP Penguard universal 150
4 PUR Hardtop XP 50 4 PUR Hardtop XP 50
Total NDFT: 290 Total NDFT: 300

1 ESI Sigmazinc 158 60 1 EPRZ Sigmazinc 68 SP 60


2 EP SigmaCover 522 30 2 EP SigmaCover 522 40
Repair
P 01 P 3 EP SigmaCover 410 150 3 EP SigmaCover 410 150
P01P
4 PUR Sigmadur 550 50 4 PUR Sigmadur 550 50
Total NDFT: 290 Total NDFT: 300

Remarks
Specific guarantee requirements: 5 years
Qualification / acceptance requirements: Minimum required pull-off test value:
- 3 MPa for checks made with mechanical tester (type Ersad, Satec, or equivalent), or
- 5 MPa for checks made with hydraulic tester (Type PAT or equivalent).

This document is the property of TOTAL S.A., it contains confidential information which may not be disclosed to any third party,
reproduced, stored or transmitted without the prior written consent of TOTAL S.A.
The information contained in this document does not substitute for applicable laws and regulations.

You might also like