Stream Deck
Stream Deck RossTalk
Plugin
The RossTalk plugin for the Corsair Stream Deck allows
you to assign RossTalk commands to buttons on the
Stream Deck using the Stream Deck software.
Note: The RossTalk plugin is only supported on Windows® 10
at this time.
Refer to the documentation that came with your Stream
Deck for information on setting up your Stream Deck.
To Install the Plugin
The RossTalk plugin is installed into Stream Deck on
the same PC that is connected to the Stream Deck To Program a Button
hardware.
Add a RossTalk command to each button on the Stream
Note: Ensure that you have the latest Stream Deck software Deck.
installed on your PC.
1. Drag RossTalk to the button you want to assign a
1. Locate the RossTalk plugin RossTalk command to.
(com.rossvideo.rosstalk
-streamdeck-v1.0.streamDeckPlugin)
on your Ross® Video Product Resources USB or
download it from the website.
2. Create a folder on your PC for the plugin. For
example, C:\Ross\StreamDeck\. The Stream
Deck software leaves the 3rd party plugins where
they are and does not copy them to the Plugins folder
of the application.
3. Double-click on the com.rossvideo.rosstalk
-streamdeck-v1.0.streamDeckPlugin
file. You are prompted to install the plugin, click
Install.
2. Click the Select a command list and select the
RossTalk command you want to send to a device.
The commands are organized by product. The
Command field is filled with the default syntax of
4. On the Stream Deck application, the RossTalk plugin the command.
has been added to the plugin list at the bottom.
Tip: To uninstall the RossTalk plugin, click More Actions,
scroll down to the RossTalk plugin and click Uninstall.
4802DR-409-01
© 2019 Ross Video Limited. Ross® and any related marks are trademarks or registered trademarks of Ross Video Limited. All other trademarks are the property of their respective companies. PATENTS ISSUED and PENDING. All rights reserved. No part of this publication
may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording or otherwise, without the prior written permission of Ross Video. While every precaution has been taken in the preparation of this document,
Ross Video assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein.
3. In the Command field, replace the <__> with the
specific parameter values for the command you want
to send.
In the example shown we are adding the MEAUTO
command for Carbonite. We replace the
<ME-source> with ME and <ME-number> with 1
to have the switcher perform an auto transition on
ME 1.
4. In the Title field, enter the text that you want to
appear on the button. Click the T next to the field to
customize the font, color, and placement of the text.
5. In the Hostname/IP Address field, enter the IP
address of the device you want to send the RossTalk
command to. With a switcher this is the IP address
of the frame.
6. Leave the Port field as 7788.
