1 2 3 4 5 6 7 8

REV DESCRIPTION OF REVISION BY APPD DATE

01 INITIAL RELEASE K.VIRTANEN yrksorrejo 2024-10-10

238
A C C i304 A

256
A
7

i304
6 8
10 11

18
1
B-B C
B B

222
5

B B
1462
1391,5

11 10 9
2 1. INLET FLANGE - ANSI 4" 150# / ISO DN100 PN16

917
C C
11 10 9 2. OVERFLOW - 5" VICTAULIC COUPLING

3. OVERFLOW FLANGE (ITEM 6) TO BE TIGHTENED TILL FLANGE MEETS

HEAD HOUSING (ITEM 1), STOP TIGHTENING ONCE THE TWO PARTS MEET
4
A-A 3 A 4. UPPER CONE FLANGE (ITEM 2) TO BE UNIFORMLY TIGHTENED TILL
FLANGE MEETS GUIDING BLOCK ON BOTTOM OF HEAD HOUSING (ITEM 1),
D STOP TIGHTENING ONCE THE TWO PARTS MEET D

MHC250-CB HYDROCYCLONE TABLE 1 (APEX LINER)

5. LOWER CONE FLANGE (ITEM 2) TO BE UNIFORMLY TIGHTENED TILL
MATERIAL No. DESCRIPTION
VORTEX FINDER APEX LINER MATERIAL No. DESCRIPTION DWG. No
APEX HOUSING (ITEM 4) MEETS RUBBER LINING OF THE CONE (ITEM 2),
MATERIAL No. MATERIAL No.
SAL537988-M1 MHC250-CB, VF 70, AL 50 MM0443313 AX02-100177659 AX02-100177659 APEX LINER MHC250-CFB-195/50-ET70 AX02-100177659 STOP TIGHTENING ONCE THE TWO PARTS MEET
SAL537988-M2 MHC250-CB, VF 70, AL 58 MM0443313 AX02-100177660 AX02-100177660 APEX LINER MHC250-CFB-195/58-ET70 AX02-100177660
SAL537988-M3 MHC250-CB, VF 70, AL 66 MM0443313 AX02-100177661 AX02-100177661 APEX LINER MHC250-CFB-195/66-ET70 AX02-100177661 11 48 SA951130 WASHER, PLAIN ISO7089-16-200HV-TZN Steel 0
SAL537988-M4 MHC250-CB, VF 70, AL 74 MM0443313 AX02-100177663 AX02-100177663 APEX LINER MHC250-CFB-195/74-ET70 AX02-100177663 10 28 SA976133 NUT, HEXAGONAL ISO4032-M16-8-TZN Steel 0
SAL537988-M5 MHC250-CB, VF 70, AL 82 MM0443313 AX02-100177664 AX02-100177664 APEX LINER MHC250-CFB-195/82-ET70 AX02-100177664 9 20 SA954849 SCREW, HEXAGONAL ISO4017-M16X60-8.8-TZN Steel 0
SAL537988-M6 MHC250-CB, VF 80, AL 50 MM0443314 AX02-100177659 8 1 AX08-100277170 SIGN MHC HYDROCYCLONE 1.4301 AX08-100277170 0
E SAL537988-M7 MHC250-CB, VF 80, AL 58 MM0443314 AX02-100177660 7 1 SAL533055-M1 OVERFLOW ELBOW ASSEMBLY,MHC250 SAL533055-M1 8 E
SAL537988-M8 MHC250-CB, VF 80, AL 66 MM0443314 AX02-100177661 TABLE 2 (VORTEX FINDER) 6 1 SAL532000-1 FLANGE OVERFLOW 1.0038 SAL532000-1 3
SAL537988-M9 MHC250-CB, VF 80, AL 74 MM0443314 AX02-100177663 MATERIAL No. DESCRIPTION DWG No. 5 1 SEE TABLE 2 VORTEX FINDER SEE TABLE 2 ET70 SEE TABLE 2 2
SAL537988-M10 MHC250-CB, VF 80, AL 82 MM0443314 AX02-100177664 4 1 AX02-100177665 HOUSING APEX, MHC-250, CRB ASTM A36 AX02-100177665 6
MHC250-CB, VF 90, AL 50 MM0443315 MM0443313 VORTEX FINDER MHC250-70-ET70 482502-117 3 1 SEE TABLE 1 APEX LINER SEE TABLE 1 ET70 SEE TABLE 1 4
SAL537988-M11 AX02-100177659
MHC250-CB, VF 90, AL 58 MM0443315 MM0443314 VORTEX FINDER MHC250-80-ET70 482502-119 2 1 AX02-100177656 CONE ASSEMBLY MHC250, CFB, STANDARD LENGTH AX02-100177656 31
SAL537988-M12 AX02-100177660
MHC250-CB, VF 90, AL 66 MM0443315 MM0443315 VORTEX FINDER MHC250-90-ET70 482502-121 1 1 ZX11503820 HEAD ASSEMBLY , 250 HYDROCYCLONE 10244419-DWK 43
SAL537988-M13 AX02-100177661
MHC250-CB, VF 90, AL 74 MM0443315 MM0443337 VORTEX FINDER MHC250-100-ET70 482502-123 ITEM QTY. MATERIAL No. DESCRIPTION TECH. DESCRIPTION MATERIAL DWG No. MASS (kg)
SAL537988-M14 AX02-100177663
TOLERANCES UNLESS OTHERWISE SPECIFIED:
SAL537988-M15 MHC250-CB, VF 90, AL 82 MM0443315 AX02-100177664 STANDARDS AND INSTRUCTIONS
ALL DIMENSIONS IN mm WELDING EN ISO 13920 BE, MACHINING ISO 2768-1 mK
FOR MANUFACTURING
SAL537988-M16 MHC250-CB, VF 100, AL 50 MM0443337 AX02-100177659 BREAK ALL SHARP CORNERS AND EDGES
DRAWN BY: K.VIRTANEN CHECKED BY: yrksorrejo APPROVED BY: yrksorrejo CUSTOMER:
SAL537988-M17 MHC250-CB, VF 100, AL 58 MM0443337 AX02-100177660 1ST ANGLE
DATE: 2024-10-07 DATE: 2024-10-09 DATE: 2024-10-10 LOCATION:
SAL537988-M18 MHC250-CB, VF 100, AL 66 MM0443337 AX02-100177661 PROJECTION

F SAL537988-M19 MHC250-CB, VF 100, AL 74 MM0443337 AX02-100177663

PROJECT No. MATERIAL NUMBER MASS F
REFERENCE DRAWING N/A 100 kg
SAL537988-M20 MHC250-CB, VF 100, AL 82 MM0443337 AX02-100177664 DRAWING DESCRIPTION DRAWING NUMBER
ASSEMBLY SAL537988
THIS INFORMATION IS CONFIDENTIAL AND PROPRIETARY TO METSO CORPORATION
MHC250-CB HYDROCYCLONE REV DOCUMENT CLASSIFICATION DWG SIZE PAGE
OR IT'S SUBSIDIARIES ("METSO") AND IS PROTECTED BY TRADE SECRET, COPYRIGHT AND/OR
OTHER LAWS. IT MAY NOT BE ACCESSED, USED, COPIED OR DISCLOSED WITHOUT THE
WRITTEN CONSENT OF METSO. ALL RIGHTS RESERVED. 01 RESTRICTED A2 1 / 1
1 2 3 4 5 6 7 8