Scribd
Upload
17 views2 pages

Danfoss Product Details 2025 06 25

The document provides specifications for the Danfoss Gear Motor GR2 Unidirectional Fixed Displacement model 11089643, detailing its characteristics such as size, displacement, and mounting flange. It includes information on the product's rotation, valve settings, and compliance with Proposition 65 regarding cancer and reproductive harm. Additionally, it notes that Danfoss reserves the right to alter product specifications without notice.

Uploaded by

jonathandaviddelossantos146
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
17 views2 pages

Danfoss Product Details 2025 06 25

The document provides specifications for the Danfoss Gear Motor GR2 Unidirectional Fixed Displacement model 11089643, detailing its characteristics such as size, displacement, and mounting flange. It includes information on the product's rotation, valve settings, and compliance with Proposition 65 regarding cancer and reproductive harm. Additionally, it notes that Danfoss reserves the right to alter product specifications without notice.

Uploaded by

jonathandaviddelossantos146
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Danfoss PowerSource | 11089643 | GEAR MOTOR GR2 UNIDIRECT FIXED DISPL

GEAR MOTOR GR2 UNIDIRECT FIXED DISPL

11089643
Model Code:
S-N-U-2-N-N-/-019-R-N-06-GB-P1-E5-E6-NN-N-N-/-NNN-N-N

Where to buy 

Product specifications

Characteristic Value Description

D_SIZE GROUP2 2 Group 2:from 3 to 28 cc

Displacement 019 Displacement 19 cc

Drive gear GB Parallel SAE diam. 15,875 L=50,8 , Key


4x40 (CE06)

E_VALVE GROUP2 N Without Valve

F_DRAIN GROUP2 N Standard

Inlet size E5 7/8-14UNF

Mark position N Position Marking standard (on the top in


relation to drive gear)

Mark type N Standard Marking

Mounting flange 06 Flange SAE A, pilot Ø82,55 mm and 2


holes for bolts

O-Ring, Inside Diameter / Slash

Outlet size E6 1-1/16-12UN

Ports position NN Standard from catalogue

Project version N Standard Version of Project

ROTATION R Product with clockwise rotation

Rear cover P1 Standard cover for pump

Screws N Screws standard

Seals N Standard seal

Slash separator / Slash

Valve setting NNN without setting

©Danfoss | Generated by PowerSource on 25/06/2025 00:17 UTC 1/2


Danfoss PowerSource | 11089643 | GEAR MOTOR GR2 UNIDIRECT FIXED DISPL

General specifications

Characteristic Value

Proposition 65 Cancer and Reproductive Harm

For the most current information and other product assets, please use this link to visit the product page
on Danfoss PowerSource 

Danfoss can accept no responsibility for possible errors in catalogs, brochures and other printed material. Danfoss reserves the right to alter its products without notice.
This also applies to products already on order provided that such alterations can be made without sub-sequential changes being necessary in specifications already agreed. All trademarks in this material
are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

©Danfoss | Generated by PowerSource on 25/06/2025 00:17 UTC 2/2

You might also like