lfRcf tFlcfi Fl

GOVERNMENT OF INDIA

CP\ND

*till FricAo'
I
CENTRAL PUBLIC WORKS DEPARTMENT
ll a1ti ifl
1)
of Rates
 ll a1ti ifl
1)
of Rates

·..
....
;iiiill'
GOVERNMENT OF INDIA CENTRAL PUBLIC WO
DEPARTMENT
DELHI SCHEDULE OF RATES
(Vol. 1)
2021
Vinit Kumar Jayaswal
Director General
Hkkjr ljdkj
Government of India dsUnzh; yksd fuekZ.k foHkkx fuekZ.k Hkou] ubZ fnYy
FOREWORD
Delhi Schedule of Rates published by Central Public Works Department from time to time is a
comprehensive and useful technical document for execution of civil works. In addition to CPWD, th
Schedule of Rates is used by many Departments, Institutions, Public Sector Undertakings, Archite
and Builders.
Delhi Schedule of Rates was first published in the year 1931, followed by a number of
revisions/publications from time to time in order to bring it in line with the prevailing materials,
technologies, market rates and implementation of GST. It was revised in 1977, 1981, 1985, 1989,
1993, 1997, 2002, 2007,
2010 (Reprint), 2012, 2013, 2014, 2016 and 2019.
Last edition of Delhi Schedule of Rates was published in the year 2019. Revision of this DSR has
become necessary due to change in wages of labour and prices of materials, adoption of new
construction technologies & materials. These components have been incorporated in the DSR 202
by revising DSR 2019.
I wish to place on record the technical input and effective coordination on the part of Shri D.C.Goe
ADG (Tech.), Shri Vinayak Rai CE (CSQ) (Civil) and the sincere efforts put in by Shri Divakar
Agrawal SE (TAS), Shri S.N.Jaiswal EE(TAS), Shri Mukesh Varma Chief Estimator, Shri
Naveenkumar P JE (TAS), Shri Chalapaka Ramaraju JE (TAS) and team of officers in CSQ unit
preparation and finalizing the DSR 2021 in a short time.
I am sure that Delhi Schedule of Rates 2021 will be useful to all the engineers and architects in
Building Construction Industry in general and CPWD in particular.
Place: New Delhi (Vinit Kumar Jayaswal)
Date: July 12, 2021 Director General
Dharmesh Chandra Goel
Addl. Director General (Tech)
Hkkjr ljdkj
Government of India dsUnzh; yksd fuekZ.k foHkkx fuekZ.k Hkou] ubZ fn
PREFACE
1. Delhi Schedule of Rates popularly called as DSR is updated as 2021 edition and includes existing items of DS
2019 with (a) deletion of few items which are not in use now, (b) merger of similar items, and (c) addition of new item
line with emerging trends in construction Industry.
2. DSR 2021 is based on the prevailing market rates of materials in Delhi as on or just before 01.04.2021. The la
rates adopted are as per minimum wages applicable with effect from 01.04.2021 issued by Govt. of Delhi/ Govt. of In
whichever is higher.
3. The cost index for DSR 2021 is 105 with reference to CPWD Delhi Plinth Area Rates 2020, having base 100
01.04.2020 and cost index as on 01.04.2020 is 101 over CPWD Delhi Plinth Area Rates 2019 having base 100.
4. The technical sanctioning authority may decide rates of non-schedule items judiciously based on marke
without adding cost index.
5. This DSR 2021 shall be read along with CPWD specifications 2019 Vol.-I & II with up-to-date correction slip
6. The salient Features of DSR 2021are as follows:
6.1 DSR 2021 is bilingual and in two volumes each, however, in case of any discrepancy between English and Hind
versions, the English version shall prevail.
6.1.1 The rates of basic materials incorporated in this DSR 2021 are considered for the materials available in the
market conforming to BIS Standards/ CPWD Specifications.
6.1.2 The effect of GST on works contract has been incorporated in all the items.
6.2 Salient Modifications and Changes in Sub Heads:
6.2.1 Concrete Work: Many new items are included and amendments in existing items have been made with refe
to IS 386:2016 based on Recycled Concrete Aggregate (RCA) & Recycled Aggregate (RA). Some of the items with e
less cement than specified in the items without limit are deleted and modified items with excess cement upto 10% of t
minimum specified cement content in design mix are incorporated.
6.2.2 Reinforced Cement Concrete: Many new items are included and amendments in existing items
have been made with reference to IS 386:2016 based on Recycled Concrete Aggregate (RCA) & Recycled
Aggregate (RA). Some of the items with excess/less cement than specified in the items without limit are
deleted and modified items with excess cement upto 10% of the minimum specified cement content in design
mix are incorporated.
6.2.3 Cladding Work: Amendment is made in item no. 8.2.2 and new item is made as item no. 8.2.3
based on different colour of granite stones.
6.2.4 Wood & PVC Work: Items Nos. 9.166 to 9.174 for modular kitchen items are added.
6.2.5 Flooring: The items Nos. 11.41A.1.1 to 11.41A.3.5 for vitrified tiles of different sizes are added.
The amendment has been made in item no. 11.56.1 and new item is incorporated as item no. 11.53.2 based
on different colour of granite stones.
6.2.6 Roofing: The items Nos. 12.64, 12.65 & 12.66 for Aluminium profile sheets are added.
6.2.7 Finishing: The item No. 13.116 for high gloss / Matt finish melamine clear polish is added.
6.2.8 Repairs to Building: The amendment in existing items nos. 13.93 & 13.94 are made.
6.2.9 Road Work: The amendment has been made in item no. 16.87.1 and new item is incorporated as
item no. 16.87.2 based on different colour of granite stones.
6.2.10 Water Supply: The items Nos. 18.85A, 18.86A, 18.87A, 18.88A, 18.89A,
18.90A, 18.92A, 18.93A, 18.95A, 18.96A, 18.97A, 18.99A, 18.100A,
18.101A, 18.102A, 18.103, 18.104 & 18.105 for stainless steel pipes and fittings of Grade 316L are added.
The amendments are made in nomenclature of item no.
18.8.1 to 18.9.10 as per IS 15778:2007. The amendments are made in nomenclature of item nos.
18.70.11 & 18.70.12 with respect to specification and basic rates.
6.2.11 New Technologies and Materials: With a view to give boost to make in India initiative of the
Government, new technology items have been added in New Technologies and Materials sub head. These
new items are included for a period of two years and then performance shall be reviewed. Following are the
items added under this sub head.
1. EPS (Cellular plastic material) block (item no. 26.82)
2. Stamping finish to freshly laid plain/reinforced cement concrete (item no. 26.83).
3. Uni-axial and Bi-Axial woven Polyester Geogrids (item no. 26.84 & 26.85).
4. WPC boards in paneling, Cabinets, Doors, Windows etc. (items no. 26.86 to 26.91).
1. EPS (Cellular plastic material) block (item no. 26.82)
2. Stamping finish to freshly laid plain/reinforced cement concrete (item no. 26.83).
3. Uni-axial and Bi-Axial woven Polyester Geogrids (item no. 26.84 & 26.85).
4. WPC boards in paneling, Cabinets, Doors, Windows etc. (items no. 26.86 to 26.91).
 5. Extruded hollow clay/terracotta ventilated rain screen tiles (items no. 26.92 &
6. Amendments in existing items nos. 26.1 & 26.3 for bamboowood, i
26.22 for densified calcium silicate false ceiling tiles, item no. 26.42, 2
26.45 for light gauge steel frame work, item no. 26.48 for aluminium formwork for monolithic construction o
members are
7. Other corrections/modifications of minor nature such as typographical error, deletion of misleading content et
been unde
8. Wholehearted commitment and considerable efforts has gone into the preparation of this edition of Delhi Sc
of Rates. I convey my deep appreciation and sincere thanks to Shri Vinayk Rai CE(CSQ), Shri Divakar Agrawal SE
Shri S.N. Jaiswal EE (TAS), Shri. Mueksh Varma Chief Estimator (TAS), Shri Akhileshwar Sah Chief Eastimator
Shri. D.S.Adikari AE, Ms. Anshu Shukla AE(TAS), Shri Chalapaka Ramaraju JE(TAS), Shri Naveenkumar P JE
Shri A.K.Jha AD (OL) and his team for translation of DSR- 2021 in Hindi and other officers and staff of CSQ unit
names are not mentioned here for the sake of brevity for their sincere efforts made in the preparation of this docum
such a short time. Various individuals, Committees and field units, have immensely contributed with substantial inp
CSQ unit is indebted for their s
9. I convey my gratitude to field offices at Delhi who rose to the occasion and provided sufficient data base of
rates to CSQ office and thus enabled them to come out with this edition of DSR in a sho
10. Although due care has been taken in bringing out DSR-2021, there is possibility that some errors are sti
inadvertently. Error or omission may be brought to the notice of Superintending Engineer (TAS), CPWD, Room No
A-wing, Nirman Bhawan, New Delhi -110011 (Tele fax. 011-2306
Suggestions for improvement are we
Dharmesh Chandra Goel ADG(Tech) C

SH. No. NAME OF SUB-HEAD PAGE No.

A. BASIC RATES

0.1 HIRE CHARGES OF PLANTS & MACHINERY 3

0.2 LABOUR 7
0.3 MATERIALS 9

0.4 CARRIAGE CODES 75

B. SUB -HEADS

1 Carriage of Materials 79

2 Earth Work 89

3 Mortar 99

4 Concrete Work 103

5 Reinforced Cement Concrete 115

6 Masonry Work 135

7 Stone Work 145

8 Cladding Work 153

9 Wood and PVC Work 165

10 Steel Work 219

11 Flooring 229

12 Roofing 247

Note : For Sub Heads 13 to 26 refer to Vol. 2

SH. No. NAME OF SUB-HEAD PAGE No.

13 Finishing 273

14 Repairs to Building 291

15 Dismantling and Demolishing 307

16 Road Work 317

17 Sanitary Installations 345

18 Water Supply 373

19 Drainage 431

20 Pile work 447

21 Aluminium Work 455

22 Water Proofing 465

23 Rain Water Harvesting & Tubewells 477

24 Conservation of Heritage Buildings 485

25 Structural Glazing Aluminium Composite Panel 491

26 New Technologies and Materials 501

C. CEMENT CONSUMPTION STATEMENT 547

D. BITUMEN CONSUMPTION STATEMENT 591

DELHI SCHEDULE OF RATES
(Vol. 1)
2021
BASIC
RATES
BASIC RATES
0.1 HIRE CHARGES OF PLANTS & MACHINERY
Note :- These rates are exclusive of GST, contractor’s profit and over heads etc.

Code Description Unit Basic rate

No. as on or just
before
01.04.2021

0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 800.00
0002 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper day 800.00
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 3000.00
0004 Production cost of concrete by batch mix plant cum 400.00
0005 Hire charges of Diesel Truck - 9 tonne (with POL) day 3940.00
0006 Hire charges of Spraying machine including electric charges day 250.00
0007 Hire charges of Coaltar Sprayer day 350.00
0008 Hire charges of Barber green, drying, mixing and Asphalt Plant, with
accessories, capacity 30/45 tonne day 7700.00

0009 Pumping charges of concrete including Hire charges of pump, piping work &
accessories etc. cum 210.00

0010 Hire charges of Derrick monkey rope day 750.00

0011 Hire charges of Pump set of capacity 4000 litres/hour day 700.00
0012 Vibrator (Needle type 40 mm) day 350.00
0013 Machine for rubbing of floors day 300.00
0014 Front end loader capacity 1.00 cum day 6000.00
0015 Hire and running charges of Tripod and Mechanical Winch machine complete
with power unit and accessories day 3000.00

0016 Mastic Cooker day 750.00

0017 Hire and running charges of tipper day 3750.00
0018 Hire and running charges of loader day 6000.00
0019 Hand Grinder for mirror polish day 250.00
0020 Hydraulic Excavator (3D) with driver and fuel day 7000.00
0021 Pin vibrator day 250.00
0022 Surface Vibrator day 300.00
0023 Hot Bitumen Mixer 0.5 cum i/c hand cart day 3500.00
0024 Hire and running charges of hydraulic piling rig with power unit etc. including
complete accessories and shifting at site day 35000.00

0025 Hire and running charges of light crane day 3500.00

0026 Hire and running charges of bentonite pump day 3000.00

0027 Hire and running charges of vibrating pile driving hammer complete with
power unit and accessories day 30000.00

0028 Hire and running charges of crane 20 tonne capacity day 7000.00
0029 Carriage of ready mixed concrete by rotatory transit mixer km/cum 37.30
0030 Generator 250 KVA day 3000.00
0031 Steam curing by using boiler /Heater cum 500.00
0032 Stressing Machine (jack with pump) day 11500.00
0033 Paint applicator day 800.00
0034 Cutting saw machine day 1350.00
0035 Strands Roller machinery for laying strands day 3500.00
0036 Bed master (Pulling strands) day 3000.00
0037 Mobile crane day 4500.00
0038 Tractor with ripper attachment day 1200.00
0039 Tractor with trolley day 1200.00
0040 Air compressor 250 cfm with two leads for pneumatic cutters / hammers
day 1600.00

0041 Joint cutting machine with 2-3 blades day 800.00

0042 C.C .batch mix plant day 10000.00
0043 Road sweeper day 550.00
0044 Cost for crane upto 40 tonne capacity day 8000.00
0045 Slip form paver with sensor day 13000.00
0046 Water tanker 5000 litre day 1200.00
0047 Concrete joint cutting machine day 600.00
0048 Texturing machine day 925.00
0049 Dozer D-80-A 12 hour 1500.00
0050 Motor Grader 3.35 metre blade hour 2400.00
0051 Hydraulic Excavator of 1 cum bucket hour 800.00
0052 Front end loader 1 cum bucket capacity (incl POL) hour 1300.00
0053 Tipper-5 Cum/10 tonnes tonne/km 3.30
0054 Vibratory roller 8 to 10 tonne hour 600.00
0055 Smooth Wheeled Roller 8 to 10 tonne hour 300.00
0056 Tandem Road Roller hour 1200.00
0057 Water Tanker 5 to 6 KL capacity hour 200.00
0058 Air compressor hour 200.00
0059 Wet Mix Plant 60 TPH hour 950.00
0060 Mechanical Broom Hydraulic hour 450.00
0061 Emulsion Pressure Distributor of capacity 1750 sqm per hour hour 700.00
0062 Hot mix Plant -120 TPH capacity hour 15000.00
0063 Hot mix Plant 100 TPH Capacity hour 13000.00
0064 Paver finisher Hydrostatic with sensor control 100 TPH hour 1500.00
0065 Paver finisher Mechanical 100 TPH hour 800.00
0066 Batching and Mixing Plant @ 75 cum per hour hour 2400.00
0067 Cost for crane upto 80 tonne capacity day 15000.00
0068 Concrete Paver finisher with 40 HP Motor and sensor hour 3000.00
0069 Generator 250 KVA hour 400.00
0070 Generator 100 KVA/125 KVA hour 300.00
0071 Truck 5.5 cum/10 tonnes tonne km 3.30
0072 Cost for crane having capacity 50MT day 8500.00
0075 Road sweeper (Mechamical Broom) @ 1250 sqm per hour hour 450.00
0076 Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour actual output
hour 12000.00

0080 Hire and running charges of drill machine up to 400 mm dia (including cost of
mobile oil, diesel consumption in ordinary soil and operator)

day 7500.00
0081 Pile Integrity testing equipment day 3000.00
0082 Excavation of Diaphragm wall by Mechanical Grab sqm 1500.00
0083 Hire charges of TATA 407 or equivalent for local shifting. day 1400.00
Note :- 1. Above hire - charges (from item code 0001 to 0083) include
cost of services of operating staff, Cost of lubricating oil, diesel / Petrol/
Kerosene oil , other consumables for running the plant and machinery
and excluding GST. 2. The hire charges of plant machinery on per
day basis are for single shift of eight working hours.

0084 Hire charges of diesel truck - 9 tonne (witout POL) day 2000.00

0085 Using cost of Ultra Violet Radiation tube Hour 190.00

0086 Compressor, gun, rubber pipes & other accessories- hire charge of plant &
machinery i/c necessary fuel day 4000.00

0087 Hire Charges of Suction Jeting machine 2200 PSI machine i/c POL and
operator day 40000.00

0088 Hire charges of Drill machine upto 30 mm dia day 160.00

0089 Hire charges of sand blasting equipment day 400.00
0090 Hire charges of compressor day 500.00
0091 Welding charges of shear key to existing reinforcement each 5.00
0092 Hire charges of plant and Machinery that can inject 350 kg/day day 200.00
0093 Hire Charges of Suction Jeting machine 1500 PSI machine i/c POL
and operator day 10000.00

BASIC RATES
0.2 LABOUR
Note:- These rates are exclusive of GST, contractor’s profit and over heads and are inclusive of wages for weekly day
rest.

Code Description Unit Basic rate

No. as on or
just before
01.04.2021

0100 Bandhani day 714.00

0101 Bhisti day 714.00

0102 Blacksmith 1st class day 784.00
0103 Blacksmith 2nd class day 714.00
0111 Carpenter 1st class day 784.00
0112 Carpenter 2nd class day 714.00
0113 Chowkidar day 645.00
0114 Beldar day 645.00
0115 Coolie day 645.00
0116 Fitter (grade 1) day 784.00
0117 Assistant Fitter or 2nd class Fitter day 714.00
0119 Glazier day 714.00
0122 Mason (for plaster of paris work) 1st class day 784.00
0123 Mason (brick layer) 1st class day 784.00
0124 Mason (brick layer) 2nd class day 714.00
0125 Mason (for plain stone work) 2nd class day 714.00
0126 Mason (for ornamental stone work) 1st class day 784.00
0127 Driver for (Road roller, concrete mixer, Trucks etc.) day 784.00
0128 Mate day 714.00
0129 Sewer man day 645.00
0130 Mistry day 784.00
0131 Painter day 714.00
0132 Rock Excavator day 645.00
0133 Rock Breaker day 645.00
0134 Rock Hole Driller day 645.00
0135 Stone Chiseller day 714.00
0138 Sprayer (for bitumen, tar etc.) day 714.00
Code Description Unit Basic rate
No. as on or just
before
01.04.2021

0139 Skilled Beldar (for floor rubbing etc.) day 714.00

0141 White Washer day 714.00

0154 Nozzel man/ gun man day 784.00
0155* Mason (average) day 749.00
0156* Carpenter (average) day 749.00
0157 Operator (Pile/ Special machine) day 784.00
0159 Skilled torch operator for laying tack day 784.00
0160 Technician day 853.00
0161 Helper (Technician) day 645.00
0162 Labour for fabrication of uPVC extruded casement/ sliding windows and doors
including drilling holes, fixing of fittings & hardwares, hire charges of drill
machine and electricity charges etc.
sqm 534.00
0163 Labour for installation of uPVC extruded casement/ sliding windows and doors
including scaffolding sqm 773.00

0164 Security guard without gun (8 hours shift duty per day) day 784.00
0165 Security guard with gun (8 hours shift duty per day) day 853.00
0166 Installation charges for fixing of façade at all heights with extruded hollow
clay/terracotta ventillated rain screen tiles sqm 645.00

0167 Polisher 1st class day 784.00

0168 Polisher 2nd class day 714.00
0169 Specialized technicians day 853.00
*Note:These rates are average of 1st class and 2nd class
catogories.These are for use in the analysis of rates only.
BASIC RATES
0.3 MATERIALS
Note:- These rates are exclusive of GST, contractor’s profit and over heads and carriage etc.

Code Description Unit Basic rate

No. as on or just
before
01.04.2021

0222 Seam bolts and nuts 6 mm dia and 25 mm long 10 Nos 10.00

0223 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated
sheet 6 mm thick sqm 225.00

0224 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement close fitting
adjustable ridge metre 210.00

0225 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement corrugate
serrated adjustable ridge metre 210.00

0226 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement plain wing
adjustable ridge metre 210.00

0227 Fibre (high impact poly propelene reinforced) cement unserrated adjustable ridge for
hips metre 210.00

0228 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated
apron piece metre 200.00

0229 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement eaves filler
piece each 175.00

0230 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement north light
curves metre 280.00

0231 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement ventilator
curves each 310.00

0232 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement barge
boards boards 6 mm thick metre 400.00

0233 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement ridge finial
pair 165.00

0234 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement special north
light curves each 555.00

0235 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement S type
louvers each 260.00

0236 Multi purpose fibre reinforced by organic fibres and/or inorganic synthetic fibres cement
board 6 mm thick sqm 210.00

0237 Multi purpose fibre reinforced by organic fibres and/or inorganic synthetic fibres cement
board 8 mm thick sqm 220.00

0238 6 mm thick heavy duty fiber cement board sqm 470.00

0239 8mm thick heavy duty fiber cement board sqm 300.00
0240 9 mm thick heavy duty fiber cement board sqm 625.00
0241 12.5 mm thick Gypsum plaster board sqm 170.00
0242 6 mm thick mulitipurpose cement bonded wood particle board conforming to IS :
14276 sqm 195.00

0243 8 mm thick mulitipurpose cement bonded wood particle board conforming to IS :

14276 sqm 215.00

0244 Factory made light weight composite non asbestos fibre reinforced aerated cement
sandwitched wall/roof panel (50mm thick). The outer face on both sides of the panels
will be non asbestos fibre cement board (minimum 4mm thick) confirming to IS
14862:2000
sqm 634.00
0245 Factory made light weight non asbestos fibre reinforced aerated cement sandwitched
wall/roof panel (75mm thick). The outer face on both sides of the panels will be non
asbestos fibre cement board

(minimum 5mm thick) confirming to IS 14862:2000 sqm 789.00

0246 2mm thick sim pad each 10.00
0247 5mm thick sim pad each 15.00
0248 10mm thick sim pad each 25.00
0249 10 mm thick Cement Bonded particle board confirming to IS 14276 sqm 475.00
0278 Manufactured sand derived from Recycled Concrete Aggregate (RCA) cum 741.00
0279 Recycled Concrete Aggregate (RCA) 20 mm nominal size cum 957.00
0280 Recycled Concrete Aggregate (RCA) 12.5 mm nominal size cum 957.00
0281 Recycled Concrete Aggregate (RCA) 10 mm nominal size cum 957.00
0282 Recycled Aggregate (RA) 40 mm nominal size cum 367.00
0283 Recycled Aggregate (RA) 20 mm nominal size cum 398.00
0284 Recycled Aggregate (RA) 10 mm nominal size cum 430.00
0285 Brick Aggregate (Single size) : 63 mm nominal size cum 650.00
0286 Brick Aggregate (Single size) : 50 mm nominal size cum 650.00
0287 Brick Aggregate (Single size) : 40 mm nominal size cum 650.00
0291 Stone Aggregate (Single size) : 63 mm nominal size cum 1000.00
0292 Stone Aggregate (Single size) : 50 mm nominal size cum 1000.00
0293 Stone Aggregate (Single size) : 40 mm nominal size cum 1300.00
0294 Stone Aggregate (Single size) : 25 mm nominal size cum 1350.00
0295 Stone Aggregate (Single size) : 20 mm nominal size cum 1400.00
0296 Stone Aggregate (Single size) : 12.5 mm nominal size cum 1350.00
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 1350.00
0298 Stone Aggregate (Single size) : 06 mm nominal size cum 1400.00
0302 Safeda ballies 125 mm diameter metre 40.00
0303 Cowdung cum 250.00
0304 Bajri cum 1000.00
0305 Bamboo 25 mm dia 2.5 metre long score 400.00
0308 Bhusa quintal 500.00
0309 Paving bitumen of grade VG-10 of approved quality tonne 25614.00
0310 Bitumen emulsion tonne 30800.00
0312 Bitumen grade PMB - 40 tonne 32950.00
0313 Blown type petroleum bitumen of penetration 85/25 of approved quality tonne 34790.00
0314 Bitumen hot sealing compound : grade A kg 29.00
0316 Bitumen solution primer of approved quality litre 47.00
0317 Premoulded joint filler 12 mm thick sqm 360.00
0318 Bitumen felt fibre base (vegetable or animal):As per IS 7193 Grade I sqm 70.00
0319 Bitumen felt as per IS 7193 Grade II sqm 80.00
0322 Bitumen felt :Type 3 grade 1 sqm 70.00
0323 Separation Membrane of impermeable plastic sheeting 125 micron thick sqm 12.00
0324 Coal Tar litre 30.00
0325 Blasting powder kg 40.00
0326 Blasting fuse (fuse wire) each 15.00
0328 White face insulating board: 12 mm thick sqm 235.00
0332 Natural colour insulating board: 12 mm thick sqm 210.00

0336 Flame retardant face insulating board: 12 mm thick sqm 320.00

0339 Flame retardant face insulating, Impregnated fibre board 12 mm thick sqm 375.00
0341 Flat pressed 3 layer particle board (medium density) Grade 1, 12 mm thick
sqm 288.00

0346 Extra for veneered particle board with Teak veneering on one side and commercial
veneering on other side sqm 230.00

0347 Extra for veneered particle board with Commercial veneering on both sides
sqm 155.00

0348 Extra for veneered particle board with Teak veneering on both sides sqm 500.00
0349 Curing compound litre 38.00
0351 Integral crystalline slurry kg 195.00
0352 Integral crystalline admixture kg 230.00
0353 Crystalline mortar kg 190.00
0354 Integral crystalline dry shake kg 280.00
0355 Swellable type water stop tape metre 325.00
0356 Primer for swellable type water stop tape litre 1300.00
0357 Polymer modified adhesive mortar kg 14.00
0362 Brick bats cum 450.00
0364 Wire brush each 20.00
0365 Soft brush each 20.00
0367 Portland Cement (OPC-43 Grade) tonne 5000.00
0368 White Cement tonne 11200.00
0369 Plastic sheet,1.25 mm thick for dowel bars sqm 25.00
0370 Coal (steam) quintal 440.00
0371 Sealant primer kg 130.00
0373 Cramp Gun metal 25x6x300 mm each 80.00
0374 Pre moulded Joint filler, 25 mm thick for expansion joint. sqm 400.00
0378 Brass butt hinges (light/ordinary type) : 125x70x4 mm 10 Nos 775.00
0379 Brass butt hinges (light/ordinary type) : 100x70x4 mm 10 Nos 625.00
0380 Brass butt hinges (light/ordinary type) : 75x40x2.5 mm 10 Nos 380.00
0381 Brass butt hinges (light/ordinary type) : 50x40x2.5 mm 10 Nos 155.00
0382 Brass butt hinges (heavy type) : 125x85x5.5 mm(0.70 kg) 10 Nos 1309.00
0383 Brass butt hinges (heavy type) : 100x85x5.5 mm(0.56 kg) 10 Nos 997.00
0384 Brass butt hinges (heavy type) :75x65x4.0 mm (weighing not less than 0.20 kg)
10 Nos 838.00

0385 Brass parliamentary hinges 150x125x27x5 mm 10 Nos 2610.00

0386 Brass parliamentary hinges 125x125x27x5 mm 10 Nos 2300.00
0387 Brass parliamentary hinges 100x125x27x5 mm 10 Nos 2090.00
0388 Brass parliamentary hinges 75x100x20x3.2 mm 10 Nos 1870.00
0389 Brass single acting spring hinges 150 mm each 425.00
0390 Brass single acting spring hinges 125 mm each 285.00
0391 Brass single acting spring hinges 100 mm each 250.00
0392 Brass double acting spring hinges 150 mm each 480.00
0393 Brass double acting spring hinges 125 mm each 400.00
0394 Brass double acting spring hinges 100 mm each 390.00
0400 Brass tower bolt (barrel type) 250x10 mm each 257.00

0401 Brass tower bolt (barrel type) 200x10 mm each 205.00

0402 Brass tower bolt (barrel type) 150x10 mm each 154.00
0403 Brass tower bolt (barrel type) 100x10 mm each 103.00
0404 Brass flush bolt 250 mm each 150.00
0405 Brass flush bolt 150 mm each 130.00
0406 Brass flush bolt 100 mm each 90.00
0408 Brass handles 125 mm with plate 175x32 mm each 144.00
0409 Brass handles 100 mm with plate 150x32 mm each 133.00
0410 Brass handles 75 mm with plate 125x32 mm each 103.00
0411 Brass door latch 300x16x5 mmweighing not less than 0.380 kg each 185.00
0412 Brass door latch 250x16x5 mm weighing not less than 0.350 kg each 175.00
0413 Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever
handles each 400.00

0414 Brass mortice latch 100x65mm with a pair of brass lever handles each 310.00
0417 Brass 150 mm floor door stopper weighing not less than 0.357kg each 160.00
0418 Brass hard drawn hooks and eyes 300 mm 10 Nos 600.00
0419 Brass hard drawn hooks and eyes 250 mm 10 Nos 574.00
0420 Brass hard drawn hooks and eyes 200 mm 10 Nos 510.00
0421 Brass hard drawn hooks and eyes 150 mm 10 Nos 400.00
0422 Brass hard drawn hooks and eyes 100 mm 10 Nos 345.00
0423 Brass casement window fastener each 45.00
0424 Brass casement stays (straight peg type) 300 mm weighing not less than 0.33 kg
each 126.00

0425 Brass casement stays (straight peg type) 250 mm weighing not less than 0.28 kg
each 100.00

0426 Brass casement stays (straight peg type) 200 mm weighing not less than 0.24 kg
each 95.00

0427 Brass quadrant stays 300 mm each 110.00

0428 Brass fanlight catch 10 Nos 170.00
0429 Brass fanlight pivot 10 Nos 168.00
0430 Brass chain with hook for fan light catch each 36.00
0431 Brass hasps and staples (safety type) 150 mm 10 Nos 740.00
0432 Brass hasps and staples (safety type) 115 mm 10 Nos 670.00
0433 Brass hasps and staples (safety type) 90 mm 10 Nos 575.00
0438 Brass night latch each 610.00
0442 Brass helical spring 150 mm each 290.00
0444 Brass curtain rod 20 mm dia 1.25 mm thick metre 140.00
0445 Brass curtain rod 25 mm dia 1.25 mm thick metre 190.00
0446 Brass brackets (curtain rods) 20 mm each 45.00
0447 Brass cupboard knob or wardrobe knob 50 mm each 36.00
0449 Brass screws 50 mm 100 Nos 220.00
0450 Brass screws 40 mm 100 Nos 170.00
0451 Brass screws 30 mm 100 Nos 140.00
0452 Brass screws 25 mm 100 Nos 100.00
0453 Brass screws 20 mm 100 Nos 95.00
0454 Stainless steel SS grade 304 , curtain rod 20 mm dia 1.20mm thick metre 125.00

0455 Stainless steel SS grade 304, curtain rod 25 mm dia 1.20mm thick metre 170.00
0456 Stainless steel SS grade 304, brackets ( curtain rod) 20 mm dia
1.20mm thick each 46.00

0457 Stainless steel SS grade 304, brackets ( curtain rod) 25 mm dia

1.20mm thick each 55.00
0458 plastic sleeves for screw each 2.00
0524 Chromium plated Brass butt hinges (heavy) type 75x65x4 mm weighing not less than
200gms 10 Nos 905.00

0525 Chromium plated Brass butt hinges (light/ordinary) type 125x70x4mm 10 Nos 805.00
0526 Chromium plated Brass butt hinges (light/ordinary) type 100x70x4 mm 10 Nos 690.00
0527 Chromium plated Brass butt hinges (light/ordinary) type 75x40x2.5 mm 10 Nos 421.00
0528 Chromium plated Brass butt hinges (light/ordinary) type 50x40x2.5 mm 10 Nos 180.00
0552 75mm SS fancy handles for kitchen cabinet 10 Nos. 255.00
0553 100mm SS fancy handles for kitchen cabinet 10 Nos 455.00
0554 125mm SS fancy handles for kitchen cabinet 10 Nos 640.00
0555 Chromium plated Brass handles 125 mm with plate 175 x32 mm each 160.00
0556 Chromium plated Brass handles 100 mm with plate 150 x 32 mm each 140.00
0557 Chromium plated Brass handles 75mm with plate 125x32 mm each 125.00
0558 Chromium plated Brass mortice latch and lock 100x65 mm with 6 levers and a pair of
brass lever handles each 470.00

0568 Chromium plated brass casement window fastener each 90.00

0569 Chromium plated Brass casement stays (straight peg type) 300 mm weighing not
less than 0.33 kg each 140.00

0570 Chromium plated Brass casement stays (straight peg type) 250 mm weighing not
less than 0.28 kg each 120.00

0571 Chromium plated Brass casement stays (straight peg type) 200 mm weighing not
less than 0.24 kg each 100.00

0583 Chromium plated Brass Night latch each 500.00

0584 Chromium plated Brass Wardrobe Knob 50 mm each 80.00
0585 Chromium plated Brass screws 50 mm 100 Nos 300.00
0586 Chromium plated Brass screws 40 mm 100 Nos 290.00
0587 Chromium plated Brass screws 30 mm 100 Nos 240.00
0588 Chromium plated Brass screws 25 mm 100 Nos 180.00
0589 Chromium plated Brass screws 20 mm 100 Nos 160.00
0590 Chromium plated Brass curtain rod 12 mm dia 1.25mm thick metre 185.00
0591 Chromium plated Brass curtain rod 20 mm dia 1.25mm thick metre 260.00
0592 Chromium plated Brass curtain rod 25 mm dia 1.25mm thick metre 340.00
0593 C.P. Brass Extension Nipple (1/2"x2" size) each 40.00
0594 Bright finished or black enameled mild steel butt hinges 125x65x
2.12 mm 10 Nos 135.00

0595 Bright finished or black enameled mild steel butt hinges 100x58x
1.90 mm 10 Nos 80.00

0596 Bright finished or black enameled mild steel butt hinges 75x47x
1.70 mm 10 Nos 56.00

0597 Bright finished or black enameled mild steel butt hinges 50x37x
1.50 mm 10 Nos 49.00

0608 Nickel plated bright finished mild steel piano hinges 1 mm thick
25 mm wide metre 39.00
0635 Bright finished or black enameled mild steel screws 50 mm 100 Nos 75.00
0637 Bright finished or black enameled mild steel screws 40 mm 100 Nos 60.00
0638 Bright finished or black enameled mild steel screws 30 mm 100 Nos 45.00
0639 Bright finished or black enameled mild steel screws 25 mm 100 Nos 40.00
0640 Bright finished or black enameled mild steel screws 20 mm 100 Nos 35.00
0641 Bright finished or black enameled mild steel bolts and nuts 50x6 mm each 5.00
0642 Oxidised mild steel butt hinges 125x65x2.12 mm 10 Nos 125.00
0643 Oxidised mild steel butt hinges 100x58x1.90 mm 10 Nos 90.00
0644 Oxidised mild steel butt hinges 75x47x1.70 mm 10 Nos 65.00
0645 Oxidised mild steel butt hinges 50x37x1.50 mm 10 Nos 55.00
0646 Oxidised mild steel parliamentary hinges 150x125x27x2.8 mm 10 Nos 335.00
0647 Oxidised mild steel parliamentary hinges 125x125x27x2.8 mm 10 Nos 300.00
0648 Oxidised mild steel parliamentary hinges 100x125x27x2.8 mm 10 Nos 235.00
0649 Oxidised mild steel parliamentary hinges 75x100x20x2.24 mm 10 Nos 200.00
0650 Oxidised mild steel single acting spring hinges 150 mm each 140.00
0651 Oxidised mild steel single acting spring hinges 125 mm each 120.00
0652 Oxidised mild steel single acting spring hinges 100 mm each 100.00
0653 Oxidised mild steel double acting spring hinges 150 mm each 160.00
0654 Oxidised mild steel double acting spring hinges 125 mm each 140.00
0655 Oxidised mild steel double acting spring hinges 100 mm each 120.00
0656 Nickel plated mild steel piano hinges 1 mm thick 35 mm wide metre 40.00
0660 Oxidised mild steel sliding door bolt 300x16 mm each 90.00
0661 Oxidised mild steel sliding door bolt 250x16 mm each 80.00
0662 Oxidised mild steel door latch 300x20x6 mm each 49.00
0663 Oxidised mild steel door latch 250x20x6 mm each 39.00
0664 Oxidised mild steel tower bolt (barrel type) 250x10 mm each 43.00
0665 Oxidised mild steel tower bolt (barrel type) 200x10 mm each 34.00
0666 Oxidised mild steel tower bolt (barrel type) 150x10 mm each 29.00
0667 Oxidised mild steel tower bolt (barrel type) 100x10 mm each 20.00
0668 Oxidised mild steel handles 125 mm each 20.00
0669 Oxidised mild steel handles 100 mm each 15.00
0670 Oxidised mild steel handles 75 mm each 12.00
0679 Oxidised mild steel hasps and staples (safety type) 150 mm 10 Nos 128.00
0680 Oxidised mild steel hasps and staples (safety type) 115 mm 10 Nos 108.00
0681 Oxidised mild steel hasps and staples (safety type) 90 mm 10 Nos 79.00
0682 Oxidised mild steel screws 50 mm 100 Nos 76.00
0683 Oxidised mild steel screws 40 mm 100 Nos 62.00
0684 Oxidised mild steel screws 30 mm 100 Nos 49.00
0685 Oxidised mild steel screws 25 mm 100 Nos 36.00
0686 Oxidised mild steel screws 20 mm 100 Nos 32.00
0687 Anodised Aluminium butt hinges 125x75x4 mm 10 Nos 560.00
0688 Anodised Aluminium butt hinges 125x63x4 mm 10 Nos 393.00
0689 Anodised Aluminium butt hinges 100x75x4 mm 10 Nos 393.00
0690 Anodised Aluminium butt hinges 100x63x3.2 mm 10 Nos 270.00
0691 Anodised Aluminium butt hinges 100x63x4 mm 10 Nos 324.00
0692 Anodised Aluminium butt hinges 75x63x4 mm 10 Nos 275.00
0693 Anodised Aluminium butt hinges 75x63x3.2 mm 10 Nos 226.00
0694 Anodised Aluminium butt hinges 75x45x3.2 mm 10 Nos 196.00
0696 Anodised Aluminium sliding door bolt 300x16 mm each 147.00
0697 Anodised Aluminium sliding door bolt 250x16 mm each 128.00
0698 Anodised Aluminium tower bolt (barrel type) 300x10 mm 10 Nos 580.00
0699 Anodised Aluminium tower bolt (barrel type) 250x10 mm 10 Nos 481.00
0700 Anodised Aluminium tower bolt (barrel type) 200x10 mm 10 Nos 383.00
0701 Anodised Aluminium tower bolt (barrel type) 150x10 mm 10 Nos 304.00
0702 Anodised Aluminium tower bolt (barrel type) 100x10 mm 10 Nos 226.00
0703 Anodised Aluminium handles 125 mm with plate 175 x 32 mm 10 Nos 324.00
0704 Anodised Aluminium handles 100 mm with plate 150 x 32 mm 10 Nos 275.00
0705 Anodised Aluminium handles 75mm with plate 125 x 32 mm 10 Nos 231.00
0706 Anodised Aluminium kicking plate 50 cm long 100x3.15 mm each 142.00
0713 Block board construction flush door with teak wood ply on both faces 35 mm thick
sqm 1800.00

0714 Block board construction flush door with teak wood ply on both faces 30 mm thick
sqm 1600.00

0715 Block board construction flush door with teak wood ply on both faces 25 mm thick
sqm 1400.00

0717 Block board construction flush door with commercial ply on both faces 35 mm thick
sqm 1000.00
0718 Block board construction flush door with commercial ply on both faces 30 mm thick
sqm 900.00

0719 Block board construction flush door with commercial ply on both faces 25 mm thick
sqm 890.00

0752 Block board construction flush door lipping 25 mm thick sqm of door 300.00
area
0753 Square vision panel in Block board construction flush door not exceeding 0.10 sqm sqm of door 130.00
area
0754 Circular vision panel in Block board construction flush door sqm of door 135.00
area
0755 Decorative type louvers in Block board construction flush door sqm of door 265.00
area
0757 Rebate cutting in block board construction flush door sqm of door 70.00
area
0759 Decorative plywood 4 mm sqm 320.00
0761 Fuel wood quintal 500.00
0763 Glue kg 75.00
0764 Calcium silicate base compound for jointing calcium silicate tiles kg 26.00
0765 Hessian cloth sqm 35.00
0768 Cement Concrete Jali 50 mm thick sqm 400.00
0769 Cement Concrete Jali 40 mm thick sqm 350.00
0770 Cement Concrete Jali 25 mm thick sqm 275.00
0771 Kerosene oil litre 50.00
0772 White cement based polymer modified self curing compound in powder
form kg 15.00

0773 Unslaked lime quintal 300.00

0775 Dehradun white lime quintal 600.00
0776 Satna lime quintal 370.00
0777 Dry hydrated lime (factory made) quintal 290.00
0784 Marble dust/ powder cum 1130.00
0785 Marble chips up to 4 mm and down size White & black quintal 189.00
0788 Marble chips large size above 4 mm White & black quintal 250.00
0801 Silicon and acrylic emulsion litre 120.00
0802 Acrylic distemper 1st quality , having VOC content less than 50 grams/ litre Kg 40.00
0803 Acrylic emulsion, having VOC content less than 50 grams/ litre litre 94.00
0804 Premium plastic acrylic emulsion of interior grade, having VOC content less than 50
grams/ litre litre 200.00

0806 Ready mixed pink or grey primer on wood work (hard and soft wood) having VOC
content less than 50 grams/ litre litre 105.00

0808 Water thinnable cement primer for interior wall surface, having VOC content less than
50 grams/ litre litre 50.00

0810 Moorum cum 500.00

0811 Mud (dry) cum 165.00
0818 Linseed oil (double boiled) litre 200.00
0824 White cement based putty kg 13.00
0826 Aluminium paint litre 150.00
0827 Acid proof paint (chocolate or black) litre 225.00
0828 Anticorrosive bituminous paint (black) litre 100.00
0829 Black Japan paint litre 90.00
0833 Synthetic enamel paint in black or chocolate shade litre 175.00
0834 Synthetic enamel paint in all shades except black or chocolate shade litre 165.00
0836 100% Premium acrylic dirt resistance, Silicone additives exterior paint litre 270.00
0837 Acrylic Exterior Primer litre 100.00
0845 Roofing paint for iron sheets in red colour litre 120.00
0850 White lead kg 170.00
0851 Water proofing cement paint kg 38.00
0855 Wax polish (ready made) kg 230.00
0856 Ordinary varnish litre 100.00
0857 Superior copal varnish litre 115.00
0858 Superior spar varnish litre 115.00
0859 Oil type wood preservative litre 130.00
0863 Putty for wood work kg 28.00
0865 Pig lead kg 130.00
0868 Premixed super white gypsum plaster kg 6.00
0869 Plaster of Paris kg 5.00
0870 Plug each 10.00
0873 Copper pins 6 mm dia 7.5 cm long each 10.00
0874 Black colour dark shade pigment kg 70.00
0875 Red, chocolate, orange, buff or yellow (red oxide of iron) light shade pigment
kg 60.00

0876 Green or blue medium shade pigment kg 56.00

0886 Standard holder bat clamps for sand cast iron or cast iron pipes 150 mm dia
each 45.00

0966 Sand Cast iron plain shoe 150 mm dia each 285.00
0967 Copper plate kg 527.00
0969 Pulley 25 mm dia each 48.00
0973 Rolling shutter made of 80x1.25 mm machine rolled laths sqm 1400.00
0974 Top cover for rolling shutters 1.25 mm thick metre 800.00
0975 27.5 cm long wire spring grade No. 2 for rolling shutters each 300.00
0976 Ball bearing for rolling shutters each 260.00
0977 Extra for mechanical devices chain and cranked operation for operating rolling shutters:
exceeding 10.00 sqm and up to 16.80 sqm area of door sqm 800.00

0978 Extra for mechanical devices chain and cranked operation for operating rolling shutters:
exceeding 16.80 sqm area of door sqm 800.00

0979 Royalty for good earth cum 40.00

0980 Royalty for sludge cum 90.00
0982 Coarse sand (zone III) cum 1500.00
0983 Fine sand (zone IV) cum 900.00
0992 Galvanised steel plain sheets quintal 5000.00
0993 FY-1860 grade wire strands quintal 5700.00
0994 Standard quality hard board sheet 3 mm thick sqm 135.00
0996 Standard quality hard board sheet 4.5 mm thick sqm 210.00
0999 Shellac kg 300.00
1000 Spirit litre 48.00
1001 Spun yarn kg 50.00
1002 Mild steel round bar 12 mm dia and below quintal 4850.00
1003 Mild steel round bar above 12 mm dia quintal 4750.00
1004 Average rate of Mild steel round bars for reinforcement quintal 4850.00
1005 Twisted steel/ deformed TMT bars Fe-500D quintal 4900.00
1006 Mild steel square bars quintal 4850.00
1007 Structural steel such as tees, angles channels and R.S. joists quintal 4950.00
1008 Flats up to 10 mm in thickness quintal 4850.00
1009 Flats exceeding 10 mm in thickness quintal 4950.00
1010 Mild steel plates quintal 5400.00
1011 Steel glazed door, window/ ventilator, all members viz. F7D, F4B, K11 and K12B etc.
kg 54.00
1012 Pregalvanized high tensile steel confirming to IS:277-199 kg 90.00
1013 Mild steel sheets of 1.00 mm thickness for tanks quintal 4850.00
1015 Mild steel expanded metal 20x60 mm strands 3.25 mm wide
1.60 mm thick sqm 280.00

1019 Mild steel hooks each 32.00

1020 Mild steel rivets quintal 5100.00
1021 Hard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 7.75 kg/sqm
sqm 430.00

1022 Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots
10 Nos 38.00

1023 Galvanised steel J or L hooks 8 mm dia 10 Nos 120.00

1024 Galvanised steel bolts & nuts 10 mm dia and 125 mm long round head with slots
each 9.00

1025 Mild steel bolts 6 mm dia and 25 mm long with hexagonal head 10 Nos 10.00
1027 Erection Bolts ( Minimum 04 nos for each element) each 25.00
1028 Straining bolts each 80.00
1029 Galvanised steel barbed wire of 9.8 kg /100metre quintal 5500.00
1030 Galvanised steel turn buckles each 25.00
1031 Galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded with 4
galvanised steel nuts each 20.00

1032 Galvanised steel bolts 10 mm dia and 7 cm long with nuts each 6.00
1034 Bolts and nuts up to 300 mm in length quintal 5200.00
1035 Bolts and nuts above 300 mm in length quintal 5300.00
1036 Iron pintels including welded pin each 37.00
1143 Steel beading 10x10x1.6mm (box type) metre 27.00
1145 Aluminium Plain Strip edging 38x12x3 mm metre 90.00
1149 Glass strip 4 mm thick 40 mm deep metre 20.00
1151 Boundary stone top chisel dressed 15x15x90 cm each 80.00
1154 Through and bond stone 100 Nos 5000.00
1157 Stone for masonry work cum 1100.00
1158 Stone for pitching 15 cm x 22.5 cm cum 600.00
1159 Stone dust cum 1100.00
1160 Red sand stone block 10 cudm 80.00
1161 White sand stone block 10 cudm 205.00
1163 White sand stone slab 75 mm thick (un-dressed) sqm 800.00
1164 Red sand stone slab 40 mm thick (un-dressed) sqm 230.00
1165 White sand stone slab 40 mm thick (un-dressed) sqm 250.00
1166 Red sand stone slab 30 mm thick (un-dressed) sqm 220.00
1168 Kota stone slab 20 mm to 25 mm thick (semi-polished) sqm 320.00
1169 Kota stone slab 25mm thick (rough chiseled) sqm 250.00
1174 Red sand stone slab 45 mm to 50 mm thick (un-dressed) sqm 260.00
1175 White sand stone slab 45 mm to 50 mm thick (un-dressed) sqm 280.00
1177 Stone grit 6 mm and down size or pea sized gravel cum 800.00
1179 Crushed stone 2.36 mm to 12.5 mm size cum 900.00
1182 Surkhi cum 700.00
1186 Superior class teak wood such as Dandeli, Balarshah or Malabar in planks
10 cudm 1100.00

1187 First class teak wood in scantling 10 cudm 880.00

1188 First class teak wood in planks 10 cudm 850.00
1189 Second class teak wood in scantling 10 cudm 776.00
1190 Second class teak wood in planks 10 cudm 791.00
1191 Marandi wood in planks 10 cudm 440.00
1192 Marandi wood in scantling 10 cudm 431.00
1194 Second class deodar wood in planks 10 cudm 500.00
1196 First class kail wood in planks 10 cudm 300.00
1197 Second class kail wood in scantling 10 cudm 260.00
1198 Second class kail wood in planks 10 cudm 260.00
1199 Sal wood in scantling 10 cudm 600.00

1200 Kiln seasoned selected sheesham wood planks 10 cudm 650.00

1201 Precast terrazzo tiles 22 mm thick (light shade) sqm 285.00
1202 Precast terrazzo tiles 22 mm thick (medium shade) sqm 265.00
1203 Precast terrazzo tiles 22 mm thick (dark shade) sqm 245.00
1204 Precast heat resistant terrace tiles (size 300x300 mm) and 20 mm thick sqm 409.00
1207 G.I. Limpet washer 100 Nos 21.00
1208 Bitumen washer 100 Nos 30.00
1209 G.I. plain washer thick 100 Nos 35.00
1210 G.I. plain washer thin 100 Nos 21.00
1211 G.I. plain washer for seam bolts 100 Nos 32.00
1213 Water proofing materials kilogram 35.00
1214 Welding by gas plant cm 2.00
1215 Welding by electric plant cm 2.00
1216 Whiting quintal 600.00
1217 GI Wire mesh 100x100 mm kg 75.00
1218 M.S. Shear stud each 50.00
1219 M.S. Wire nails kilogram 58.00
1220 M.S. Wire mesh (rabbit) sqm 42.00
1221 M.S. 20 mm dia holding down bolts quintal 6100.00
1222 Mild steel sheets with bolts and nuts to rest on pintels each 120.00
1223 Steel weld mesh sqm 150.00
1224 Hard drawn steel wire quintal 4800.00
1225 Mild steel flat strap fitting quintal 4120.00
1227 Chequered terrazzo tiles 22 mm thick (light shade) sqm 275.00
1228 Chequered terrazzo tiles 22 mm thick (medium shade) sqm 300.00
1229 Chequered terrazzo tiles 22 mm thick (dark shade) sqm 260.00
1231 Extra for selected planks of second class teakwood 10 cudm 150.00
1234 Aluminium Plain Strip edging 57x12x3 mm metre 135.00
1235 Diesel litre 80.87
1237 Cutting marble or sand stone slab up to 50 mm thick by mechanical device
metre 10.00

1238 Extra for selected planks of first class teakwood 10 cudm 150.00
1239 18 mm thick Flamed finish granite stone slab sqm 1000.00
1240 18 mm thick Italian Marble stone slab, Perlato (slab area up to 0.5 sqm). sqm 3209.00
1241 Commercial LPG in cylinder kg 84.00
1242 Glass mossaic tiles (20 mm x 20 mm x 4 mm) sqm 2049.00
1243 Tile fixing chemical adhesive kg 8.70
1244 Cement Polymer Grout Compound kg 13.00
1245 Acid for cleaning tiles litre 18.00
1246 Silicon based Joint Sealant for Tiles kg 160.00
1247 Rubber base Adhesive kg 223.00
1248 Epoxy based sealing Compound kg 535.00
1249 Acrylic based sealing compound kg 500.00
1250 Non woven reinforcement Tape metre 0.14
1251 M-60 grade cemetitious grout (Non Shrink) kg 28.00
1252 Cementitious polymer base adhesive confirming to EOTA ETAG 004 (European
Technical Approval) kg 34.00

1253 Polypropylene mechanical fastener with plastic pin confirming to EOTA ETAG 014
(European Technical Approval) having dia 10mm & L=200mm
each 30.00
1254 Moisture cure Polyurethane Foam 750 ml 600.00
1255 PVC Corner Bead of size 25mmx25mm fixed with glass fibre mesh (100mm x
100mm) metre 90.00

1256 Cementitious polymer base coat confirming to EOTA ETAG 004 (European Technical
Approval) kg 40.00

1257 Fiberglass mesh with alkali-resistant coating having mass per unit area ?145
g/m2, mesh size: 3.9x4.0 mm ±10% sqm 75.00

1301 Bleaching powder quintal 1800.00

1304 Surface box for stop cock each 125.00
1305 Surface box for sluice valve each 210.00
1307 Surface box for water meter each 250.00
1309 C.I. bracket for wash basin and sinks pair 88.00
1313 8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with
S.S. tringular plate for Eureopean type W.C. each 200.00

1314 C.P.brass chain with 32 mm dia rubber plug each 40.00

1315 C.P.brass chain with 40 mm dia rubber plug each 40.00
1316 50mmx50mm hardwood plug each 50.00
1330 Clamps and M.S. stays including bolts and nuts for 100 mm pipe each 67.50
1331 M.S. Holder bat clamp of approved design for 100 mm S.C.I. pipe each 30.00
1332 M.S. Holder bat clamp of approved design for 75 mm S.C.I. pipe each 27.00
1334 Clamps and M.S. stays including bolts and nuts for 50 mm pipe each 35.00
1335 Clamps and M.S. stays including bolts and nuts for 75 mm pipe each 37.00
1336 Clearing eye with chain and lid 100 mm dia each 44.00
1337 Clearing eye with chain and lid 150 mm dia each 50.00
1339 Brass bib-cock 15 mm dia each 210.00
1340 Brass bib-cock 20 mm dia each 225.00
1342 Brass stop-cock 15 mm dia each 210.00
1343 Brass stop-cock 20 mm dia each 225.00
1350 Mosquito proof coupling of approved design each 30.00
1352 C.I. cover and frame 300x300 mm inside each 480.00
1353 C.I. cover without frame 300x300 mm inside weight not less than 4.50 kg each 477.00
1354 C.I. Rectangular cover 455x610 mm with frame (low duty) each 1400.00
1355 C.I. Rectangular cover 455x610 mm without frame (low duty) each 910.00
1356 C.I. 500 mm dia cover with frame (medium duty) each 4400.00
1357 C.I. 500 mm dia cover without frame (medium duty) each 2300.00
1360 C.I. mouth, brass ferrule 15 mm dia each 140.00
1361 C.I. mouth, brass ferrule 20 mm dia each 160.00
1362 C.l. mouth, brass ferrule 25 mm dia each 220.00
1363 Vitreous china foot rests 250x130x30 mm pair 100.00
1364 C.I. grating 100x100 mm each 40.00
1366 C.I. grating 150x150 mm each 55.00
1367 C.I. grating 180x180 mm each 65.00
1369 S.C.I. gully or nahani grating 100 mm dia each 25.00

1373 Rubber insertions for 75 mm dia pipe joints each 16.00

1374 Rubber insertions for 100 mm dia pipe joints each 18.00
1375 Rubber insertions for 125 mm dia pipe joints each 20.00
1376 Rubber insertions for 150 mm dia pipe joints each 20.00
1377 Rubber insertions for 200 mm dia pipe joints each 25.00
1378 Rubber insertions for 250 mm dia pipe joints each 40.00
1379 Rubber insertions for 300 mm dia pipe joints each 45.00
1380 Rubber insertions for 350 mm dia pipe joints each 50.00
1381 Rubber insertions for 400 mm dia pipe joints each 73.00
1382 Rubber insertions for 450 mm dia pipe joints each 92.00
1383 Rubber insertions for 500 mm dia pipe joints each 110.00
1384 Rubber insertions for 600 mm dia pipe joints each 125.00
1392 Mirror of superior make glass 60x45 cm each 450.00
1396 Vitreous china pedestal for wash basin each 950.00
1397 Pig lead kg 210.00
1464 S & S.C.I. standard specials upto 300 mm dia (heavy class) quintal 3800.00
1466 S & S.C.I. standard specials over 300 mm dia (heavy class) quintal 3800.00
1468 Flanged C.I. standard specials upto 300 mm dia (heavy class) quintal 5700.00
1470 Flanged C.I. standard specials over 300 mm dia (heavy class) quintal 5250.00
1472 Casing pipe 100 mm dia metre 340.00
1532 Flush pipe with union spreaders and clamps all in C.P. brass for single stall
each 310.00

1533 Flush pipe with union spreaders and clamps all in C.P. brass for double stall
each 425.00

1534 Flush pipe with union spreaders and clamps all in C.P. brass for range of three stall
each 525.00

1535 Flush pipe with union spreaders and clamps all in C.P. brass for range of four stall
each 610.00

1540 Flush pipe and spreaders G.l. for single set of one squatting plate urinal each 190.00
1541 Flush pipe and spreaders G.l. for range of two squatting plates urinal each 275.00
1542 Flush pipe and spreaders G.l. for range of three squatting plates urinal each 310.00
1543 Flush pipe and spreaders G.l. for range of four squatting plates urinal each 450.00
1545 G.I. pipes 15 mm dia metre 95.00
1546 G.I. pipes 20 mm dia metre 130.00
1547 G.I. pipes 25 mm dia metre 196.00
1548 G.I. pipes 32 mm dia metre 225.00
1549 G.I. pipes 40 mm dia metre 290.00
1550 G.I. pipes 50 mm dia metre 360.00
1551 G.I. pipes 65 mm dia metre 415.00
1552 G.I. pipes 80 mm dia metre 525.00
1555 G.I. back (jam) nuts 25 mm dia each 18.00
1559 G.I. back (jam) nuts 65 mm dia each 25.00
1608 G.I. tees (equal) 25 mm each 65.00
1612 G.I. tees (equal) 65 mm each 452.00
1614 G.I. inlet connection each 70.00
1616 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 75 mm dia
each 1050.00

1617 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 100 mm dia
each 1135.00

1618 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 150 mm dia
each 1750.00

1620 S.C.I. plain bend 75 mm dia each 210.00

1621 S.C.I. plain bend 100 mm dia each 280.00
1622 S.C.I. plain bend 150 mm dia each 475.00
1624 S.C.I. bend with access door 75 mm dia each 290.00
1625 S.C.I. bend with access door 100 mm dia each 350.00
1627 S.C.I. plain single equal junctions 75x75x75 mm dia each 315.00
1628 S.C.I. plain single equal junctions 100x100x100 mm dia each 405.00
1630 S.C.I. single equal junctions 75x75x75 mm dia with access door each 390.00
1631 S.C.I. single equal junctions 100x100x100 mm dia with access door each 455.00
1633 S.C.I. plain double equal junctions 75x75x75x75 mm dia each 410.00
1634 S.C.I. plain double equal junctions 100x100x100x100 mm dia each 615.00
1636 S.C.I. double equal junctions 75x75x75x75 mm dia with access door each 525.00
1637 S.C.I. double equal junctions 100x100x100x100 mm dia with access door each 730.00
1639 Slotted cowl (terminal guard) 75 mm dia each 215.00
1640 Slotted cowl (terminal guard) 100 mm dia each 265.00
1641 G.I. Union 15 mm nominal bore each 35.00
1642 G.I. Union 20 mm nominal bore each 55.00
1643 G.I. Union 25 mm nominal bore each 115.00
1644 G.I. Union 32 mm nominal bore each 145.00
1645 G.I. Union 40 mm nominal bore each 230.00
1646 G.I. Union 50 mm nominal bore each 310.00
1647 G.I. Union 65 mm nominal bore each 525.00
1648 G.I. Union 80 mm nominal bore each 575.00
1649 Polyethylene water storage tank with cover and suitable locking arrangement
per litre 6.10

1653 Sand cast iron S&S plain single unequal junctions: 100x100x75 mm dia each 525.00
1656 Sand cast iron S&S single unequal junctions: 100x100x75 mm dia with access door
each 575.00

1659 Sand cast iron S&S plain double unequal junctions: 100x100x75x 75 mm dia
each 625.00

1662 Sand cast iron S&S double unequal junctions: 100x100x75x75 mm dia with access
door each 725.00

1666 Sand cast iron heel rest bend 75 mm dia each 300.00
1667 Sand cast iron heel rest bend 100 mm dia each 355.00
1669 S.C.I. single equal invert branch of required degree 75x75x75 mm dia each 350.00
1670 S.C.I. single equal invert branch of required degree 100x100x 100 mm dia
each 435.00

1672 S.C.I. double equal invert branch of required degree 75x75x75x 75 mm dia
each 425.00

1673 S.C.I. double equal invert branch of required degree 100x100x100x 100 mm dia
each 550.00

1674 S.C.I. single unequal invert branch of required degree 100x100x 75 mm dia
each 500.00

1677 S.C.I. double unequal invert branch of required degree 100x100x75x 75 mm dia
each 600.00

1682 S.C.I. door pieces 75 mm dia each 285.00

1683 S.C.I. door pieces 100 mm dia each 485.00
1685 S.C.I. collar 75 mm dia each 180.00
1686 S.C.I. collar 100 mm dia each 270.00
1687 Unplasticised P.V.C. connection pipe with brass union 30 cm long 15 mm bore
each 30.00

1688 Unplasticised P.V.C. connection pipe with brass union 30 cm long 20 mm bore
each 35.00

1689 Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore
each 35.00

1690 Unplasticised P.V.C. connection pipe with brass union 45 cm long 20 mm bore
each 48.00
1693 S.C.I. hand pump each 700.00
1700 R.C.C. pipes NP2 class 100 mm dia metre 210.00
1701 R.C.C. pipes NP2 class 150 mm dia metre 220.00
1702 R.C.C. pipes NP2 class 250 mm dia metre 365.00
1703 R.C.C. pipes NP2 class 300 mm dia metre 450.00
1704 R.C.C. pipes NP2 class 450 mm dia metre 775.00
1705 R.C.C. pipes NP2 class 500 mm dia metre 950.00
1706 R.C.C. pipes NP2 class 600 mm dia metre 1150.00
1707 R.C.C. pipes NP2 class 700 mm dia metre 1500.00
1709 R.C.C. pipes NP2 class 800 mm dia metre 1825.00
1710 R.C.C. pipes NP2 class 900 mm dia metre 2550.00
1711 R.C.C. pipes NP2 class 1000 mm dia metre 2950.00
1712 R.C.C. pipes NP2 class 1100 mm dia metre 3250.00
1713 R.C.C. pipes NP2 class 1200 mm dia metre 3575.00
1714 R.C.C. collars NP2 class 100 mm dia each 35.00
1715 R.C.C. collars NP2 class 150 mm dia each 37.00
1716 R.C.C. collars NP2 class 250 mm dia each 55.00
1717 R.C.C. collars NP2 class 300 mm dia each 56.00
1718 R.C.C. collars NP2 class 450 mm dia each 110.00
1719 R.C.C. collars NP2 class 500 mm dia each 120.00
1720 R.C.C. collars NP2 class 600 mm dia each 145.00
1721 R.C.C. collars NP2 class 700 mm dia each 160.00
1723 R.C.C. collars NP2 class 800 mm dia each 225.00
1724 R.C.C. collars NP2 class 900 mm dia each 240.00
1725 R.C.C. collars NP2 class 1000 mm dia each 295.00
1726 R.C.C. collars NP2 class 1100 mm dia each 315.00
1727 R.C.C. collars NP2 class 1200 mm dia each 375.00
1728 RCC pipe 450 mm dia NP-3 spigot metre 1500.00
1729 RCC pipe 600 mm dia NP-3 spigot metre 2000.00
1730 RCC pipe 900 mm dia NP-3 spigot metre 3175.00
1731 RCC pipe 1000 mm dia NP-3 spigot metre 3915.00
1732 RCC pipe 1200 mm dia NP-3 spigot metre 5200.00

1733 RCC pipe 1800 mm dia NP-3 spigot metre 9450.00

1734 RCC pipe 450 mm dia NP-4 spigot metre 1750.00
1735 RCC pipe 600 mm dia NP-4 spigot metre 2350.00
1736 RCC pipe 900 mm dia NP-4 spigot metre 4500.00
1737 RCC pipe 1000 mm dia NP-4 spigot metre 5570.00
1738 RCC pipe 1200 mm dia NP-4 spigot metre 6510.00
1739 RCC pipe 1800 mm dia NP-4 spigot metre 13650.00
1854 Stoneware pipes grade A (60 cm long) 100 mm dia each 70.00
1855 Stoneware pipes grade A (60 cm long) 150 mm dia each 125.00
1856 Stoneware pipes grade A (60 cm long) 200 mm dia each 200.00
1857 Stoneware pipes grade A (60 cm long) 230 mm dia each 300.00
1858 Stoneware pipes grade A (60 cm long) 250 mm dia each 350.00
1859 Stoneware pipes grade A (60 cm long) 300 mm dia each 525.00
1863 Fire clay kitchen sink: 600x450x250 mm each 1300.00
1871 White vitreous china laboratory sink 450x300x150 mm each 1500.00
1872 White vitreous china laboratory sink 600x450x200 mm each 2500.00
1875 White plastic seat (solid) with lid C.P. brass hinges and rubber buffers each 410.00
1876 Black plastic seat (solid) with lid C.P. brass hinges and rubber buffers each 325.00
1878 Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia each 110.00
1879 Shower rose C.P. brass for 15 to 20 mm inlet 150 mm dia each 125.00
1880 Dismenteled P or S trap scrap (approx wt 2kg) kg 25.00
1881 Spun yarn kg 55.00
1882 Strainer brass 40 mm dia 1.5 metre long each 625.00
1885 15 mm C.P. brass tap each 270.00
1889 C.P. brass toilet paper holder of standard size each 280.00
1890 Centrifugally SCI(spun) S & S P or S trap each 325.00
1891 C.I. trap for standard urinal with vent arm with operating and other couplings in C.P.
brass: 50 mm dia each 190.00

1893 C.I. trap for standard urinal with vent arm with operating and other couplings in C.P.
brass: 80 mm dia each 225.00

1895 C.P. brass trap 40 mm dia each 315.00

1896 100 mm S.C.I. trap with vent heel each 325.00
1897 100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet each 300.00
1898 100 mm S.C.I. trap with 100 mm inlet and 75 mm outlet each 220.00
1900 S.W. gully trap P type 100x100 mm each 115.00
1902 S.W. gully trap P type 150x100 mm each 155.00
1904 S.W. gully trap P type 180x150 mm each 230.00
1913 Vitreous china lipped front urinal each 470.00
1915 Vitreous china squatting plate urinal each 1053.00
1922 H.P. or L.P. ball valve with polythene floats: 15 mm dia each 215.00
1923 H.P. or L.P. ball valve with polythene floats: 20 mm dia each 240.00
1924 H.P. or L.P. ball valve with polythene floats: 25 mm dia each 230.00
1926 20 mm dia Gunmetal gate valve with wheel each 325.00
1927 Brass full way valve with C.I. wheel (screwed end) 25 mm dia each 375.00
1928 Brass full way valve with C.I. wheel (screwed end) 32 mm dia each 415.00
1929 Brass full way valve with C.I. wheel (screwed end) 40 mm dia each 500.00

1930 Brass full way valve with C.I. wheel (screwed end) 50 mm dia each 625.00
1931 Brass full way valve with C.I. wheel (screwed end) 65 mm dia each 1080.00
1932 Brass full way valve with C.I. wheel (screwed end) 80 mm dia each 1625.00
1933 Gunmetal non-return valve-horizontal (screwed end) 25 mm dia each 350.00
1934 Gunmetal non-return valve-horizontal (screwed end) 32 mm dia each 475.00
1935 Gunmetal non-return valve-horizontal (screwed end) 40 mm dia each 575.00
1936 Gunmetal non-return valve-horizontal (screwed end) 50 mm dia each 840.00
1937 Gunmetal non-return valve-horizontal (screwed end) 65 mm dia each 1525.00
1938 Gunmetal non-return valve-horizontal (screwed end) 80 mm dia each 2300.00
1940 C.I. sluice valve (with caps) class I: 100 mm dia each 2450.00
1941 C.I. sluice valve (with caps) class I : 125 mm dia each 2610.00
1942 C.I. sluice valve (with caps) class I: 150 mm dia each 3650.00
1943 C.I. sluice valve (with caps) class I : 200 mm dia each 7600.00
1944 C.I. sluice valve (with caps) class I : 250 mm dia each 10980.00
1945 C.I. sluice valve (with caps) class I: 300 mm dia each 15500.00
1947 Vitreous china flat back wash basin 630x450 mm each 725.00
1949 Vitreous china angle back wash basin 600x480 mm each 725.00
1950 Vitreous china angle back wash basin 400x400 mm each 425.00
1951 C.P. brass waste 32 mm each 85.00
1952 C.P. brass waste 40 mm each 100.00
1953 Vitreous china Indian type W.C. pan of size 580 mm each 475.00
1954 Vitreous china orrisa type W.C. pan of size 580 mm each 1290.00
1955 Vitreous china pedestal type water closet each 1025.00
1956 Bolts and nuts 16 mm dia 60 mm long each 11.50
1957 Bolts and nuts 16 mm dia 65 mm long each 13.00
1958 Bolts and nuts 20 mm dia 65 mm long each 15.00
1959 Bolts and nuts 20 mm dia 70 mm long each 17.50
1960 Bolts and nuts 20 mm dia 75 mm long each 17.00
1961 Bolts and nuts 20 mm dia 80 mm long each 17.00
1962 Bolts and nuts 24 mm dia 85 mm long each 27.00
1963 Bolts and nuts 24 mm dia 90 mm long each 31.00
1964 Bolts and nuts 27 mm dia 100 mm long each 37.00
1965 White vitreous china dual purpose closet (Anglo Indian W.C.) suitable for use as
squatting pan or European type water closet as per manufacturer's specifications
each 2500.00
1966 Floor mounted white vitrous china double trap syphonic WC with 10 litre cistern and all
fittings & fixtures,seat cover etc each 9800.00

1970 Vitreous china foot rests 250x125x25 mm pair 103.00

1980 Fly ash cum 11.00
1984 Common burnt clay F.P.S. bricks tile class designation 10 1000 Nos 4600.00
1986 Common burnt clay modular bricks class designation 12.5 1000 Nos 5200.00
2200 Carriage of Steam coal tonne 187.35
2201 Carriage of Bricks 1000 Nos 437.15
2202 Carriage of Stone aggregate below 40 mm nominal size cum 163.93
2203 Carriage of Coarse sand cum 163.93
2204 Carriage of Timber cum 187.35

2205 Carriage of Steel tonne 145.72

2206 Carriage of Stone aggregate 40 mm nominal size and above cum 178.19
2207 Carriage of Brick tiles 1000 Nos 262.29
2208 Carriage of Lime cum 163.93
2209 Carriage of Cement tonne 145.72
2211 Carriage of Tar / Bitumen tonne 163.93
2215 Carriage of Soling stone & masonry stone cum 192.86
2216 Carriage of Stone blocks white & red sand stone & kota stone slab tonne 145.72
2224 Carriage of S.W. pipes 100 mm dia 100 metre 218.58
2225 Carriage of S.W. pipes 150 mm dia 100 metre 437.15
2226 Carriage of S.W. pipes 200 mm dia 100 metre 728.59
2228 Carriage of S.W. pipes 250 mm dia 100 metre 1249.01
2229 Carriage of S.W. pipes 300 mm dia 100 metre 1561.26
2241 Carriage of Good earth cum 204.92
2242 Carriage of Dump manure by mechanical transport upto 5 km lead cum 178.19
2260 Carriage of Brick aggregate cum 178.19
2261 Carriage of Fine sand (1 part of badarpur sand: 2 parts jamuna sand) cum 163.93
2262 Carriage of Flyash cum 163.93
2264 Carriage of Rubbish cum 163.93
2265 Carriage of Moorum cum 163.93
2266 Carriage of Surkhi cum 163.93
2267 Carriage of Stone dust cum 163.93
2268 Carriage of Marble dust and/or marble chips cum 163.93
2271 Carriage of G.I. pipes below 100 mm dia tonne 145.72
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 145.72
2273 Carriage of A.C.sheet and accessories tonne 145.72
2275 Carriage of R.C.C. pipes 100 mm dia 100 metre 358.32
2281 Carriage of R.C.C. pipes 150 mm dia 100 metre 597.20
2287 Carriage of R.C.C. pipes 250 mm dia 100 metre 1380.48
2290 Carriage of R.C.C. pipes 300 mm dia 100 metre 1706.30
2299 Carriage of R.C.C. pipes 450 & 500 mm dia 100 metre 3981.36
2302 Carriage of G.I. sheet and accessories tonne 145.72
2303 Carriage of R.C.C. pipes 600,700,750 & 800 mm dia 100 metre 5972.04
2308 Carriage of Plaster of paris tonne 145.72
2309 Carriage of Cast Iron fittings tonne 145.72
2311 Carriage of Red bajri cum 163.93
2314 Carriage of Barbed wire tonne 145.72
2317 Carriage of Sludge cum 178.19
2319 Carriage of Spun iron S & S pipes 100 mm dia 100 metre 358.32
2320 Carriage of Spun iron S & S pipes 125 mm dia 100 metre 478.64
2321 Carriage of Spun iron S & S pipes 150 mm dia 100 metre 597.20
2322 Carriage of Spun iron S & S pipes 200 mm dia 100 metre 971.45
2323 Carriage of Spun iron S & S pipes 250 mm dia 100 metre 1380.48
2324 Carriage of Spun iron S & S pipes 300 mm dia 100 metre 1706.30
2325 Carriage of Spun iron S & S pipes 350 mm dia 100 metre 2388.82
2326 Carriage of Spun iron S & S pipes 400 mm dia 100 metre 3257.48

2327 Carriage of Spun iron S & S pipes 450 mm dia 100 metre 3981.36
2328 Carriage of Spun iron S & S pipes 500 mm dia 100 metre 3981.36
2329 Carriage of Spun iron S & S pipes 600mm dia 100 metre 5972.04
2330 Carriage of C.I. pipes 500 mm dia 100 metre 3981.36
2331 Carriage of R.C.C. pipes 900 mm dia 100 metre 8958.06
2332 Carriage of R.C.C. pipes 1000 mm dia 100 metre 11944.08
2333 Carriage of R.C.C. pipes 1100 mm dia 100 metre 11944.08
2334 Carriage of R.C.C. pipes 1200 mm dia 100 metre 11944.08
2335 Carriage of sand cum 163.93
2336 Carriage of R.C.C. pipe above 1200 mm dia and upto 1800 mm dia 100 metre 11944.08
2341 Carriage of Pig lead tonne 145.72
2342 Carriage of Solvent / Diesel. quintal 16.39
2343 Carriage of Ductile Iron pipes (k7) 100 mm dia 100 metre 358.32
2344 Carriage of Cast iron pipes 150 mm dia 100 metre 597.20
2345 Carriage of Cast iron pipes 200 mm dia 100 metre 971.45
2346 Carriage of Cast iron pipes 250 mm dia 100 metre 1380.48
2347 Carriage of Cast iron pipes 300 mm dia 100 metre 1706.30
2348 Carriage of Cast iron pipes 350 mm dia 100 metre 2388.82
2349 Carriage of Cast iron pipes 400 mm dia 100 metre 3257.48
2350 Carriage of Cast iron pipes 450 mm dia 100 metre 3981.36
2351 Carriage of Cast iron pipes 500 mm dia 100 metre 3981.36
2352 Carriage of Cast iron pipes 600 mm dia 100 metre 5972.04
2353 Carriage of Cast iron pipes 700 mm dia 100 metre 5972.04
2355 Carriage of Cast iron pipes 800 mm dia 100 metre 5972.04
2356 Carriage of Cast iron pipes 900 mm dia 100 metre 8958.06
2357 Carriage of Cast iron pipes 1000 mm dia 100 metre 11944.08
2358 Carriage of Bamboo Mat corrugated sheets and accessories tonne 17700.00
2391 Strips-Aluminium fluted 3.15 mm thick and 150 mm wide metre 286.00
2392 Strips Aluminium fluted 3.15 mm thick and 200 mm wide metre 381.00
2393 1 mm thick Stainless Steel Cover plate grade 304 kg 286.00
2394 Coupler 16 mm dia each 31.00
2395 Coupler 20 mm dia each 41.00
2396 Coupler 25 mm dia each 72.00
2397 Coupler 28 mm dia each 83.00
2398 Coupler 32 mm dia each 114.00
2399 Complete Roof Joint of 100 mm metre 2912.00
2400 Complete Roof Joint of 150 mm metre 3328.00
2401 Complete Roof Joint of 200 mm metre 4160.00
2402 Epoxy adhesive kg 156.00
2403 Floor Joint of 100 mm metre 3193.00
2404 Floor Joint of 150 mm metre 4120.00
2405 Floor Joint of 200 mm metre 5562.00
2406 Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm)
sqm 309.00

2407 Float glass panes of nominal thickness 5 mm (weight not less than
12.50 kg/sqm) sqm 515.00

2408 Float glass panes of nominal thickness 8 mm (weight not less than
20.00 kg/sqm) sqm 628.00

2409 Wall Joint of 100 mm metre 2472.00

2410 Wall Joint of 150 mm metre 2884.00
2411 Wall Joint of 200 mm metre 3468.00
2412 Ply wood 5 ply with commercial ply on both faces 6 mm thick sqm 306.00
2413 12 mm commercial ply sqm 510.00
2414 18 mm thick block board with commercial ply veneering on both side sqm 775.00
2415 21mm thick clear toughened Laminated glass for fins with holes sqm 6120.00
2447 Hollock ballies 125 mm diameter metre 36.00
2449 Oxidised mild steel pull bolt lock (locking bolt) of size 85 mm x 42 mm with screws,
bolts, nuts and washers complete each 62.00

2451 Brass cupboard lock 6 levers of approved quality, 40 mm size each 57.00
2452 Brass cupboard lock 6 levers of approved quality, 50 mm size each 88.00
2453 Brass cupboard lock 6 levers of approved quality, 65 mm size each 93.00
2454 Brass cupboard lock 6 levers of approved quality, 75 mm size each 108.00
2455 Brass hanging type door stopper 150 mm each 77.00
2456 Hydraulic door closer bottle type M.S. body with necessary accessories and screws
complete each 686.00

2459 Anodised Aluminium hanging type door stopper each 20.00

2464 Anodised Aluminium pull bolt lock (locking bolt) of size 85 mm x 42 mm with screws,
bolts, nuts and washers complete each 48.00

2465 Anodised Aluminium Casement stay 250 mm each 33.00

2466 Hollock wood in scantling 10 cudm 357.00
2467 Chromium plated Brass pull bolt lock (locking bolt) of size 85 mm x 42 mm with
screws, bolts, nuts and washers complete each 172.00

2468 Nickled Chromium Brass cupboard lock 40 mm size each 63.00

2469 Nickled Chromium Brass cupboard lock 50 mm size each 73.00
2470 Nickled Chromium Brass cupboard lock 65 mm size each 99.00
2471 Nickled Chromium Brass cupboard lock 75 mm size each 125.00
2480 Ply wood 5 ply with teak ply on both faces 9 mm thick sqm 884.00
2481 Ply wood 5 ply with teak ply on one face and commercial ply on another face 9 mm
thick sqm 905.00

2483 Ply wood 7 ply with teak ply on one face and commercial ply on another face 9 mm
thick sqm 1010.00

2484 Pre-laminated with decorative lamination on both side exterior Grade-I MDF Board 12
mm thick confirming to IS:14587 sqm 469.00

2485 Pre-laminated with decorative lamination on both side exterior Grade-I MDF Board 18
mm thick confirming to IS:14587 sqm 609.00

2486 Pre-laminated with decorative lamination one side and other side balancing
lamination exterior Grade-I MDF Board 25 mm thick confirming to IS: 14587
sqm 877.00
2487 Pre-laminated with decorative lamination one side and other side
balancing lamination exterior Grade-I MDF Board 12 mm thick confirming to IS:14587
sqm 439.00
2488 Pre-laminated with decorative lamination one side and other side balancing
lamination exterior Grade-I MDF Board 18 mm thick
confirming to IS:14587 sqm 582.00
2489 PVC edge bending tape 2.00 mm thick metre 21.00
2491 Pre laminated both side solid foam uPVC profile (45x20mm) metre 134.00
2492 Solid foam uPVC sheet 20mm thick pre laminated on both side sqm 2153.00
2493 PVC edge beading metre 32.00
2494 Expandable fastner with plastic sleeve each 6.00
2495 18mm thick both sides Pre-laminated cement bonded wood particle board as per
IS : 15786:2008 sqm 650.00

2496 6mm thick both sides Pre-laminated cement bonded wood particle board as per IS
: 15786:2008 sqm 455.60

2497 19mm thick prelaminated ply sqm 1500.00

2498 19mm thick both side balancing lamination factory pressed BWP grade marine ply as
per IS 710 sqm 1450.00

2500 Extra for selected planks of second class deodar wood 10 cudm 113.00
2504 Kiln seasoning of timber cum 772.00
2505 Hollock wood in planks 10 cudm 402.00
2506 Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm dia
double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia
polyamide PA 6 grade sleave. Size 10mm x 60 mm

10 Nos 270.00
2507 Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm dia
double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia
polyamide PA 6 grade sleave. Size 10mm x 80 mm

10 Nos 312.00
2508 Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm dia
double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia
polyamide PA 6 grade sleave. Size 10 mm x 120 mm

10 Nos 380.00
2509 Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm dia
double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia
polyamide PA 6 grade sleave. Size 10mm x 140 mm

10 Nos 468.00
2510 Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm dia
double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia
polyamide PA 6 grade sleave. Size 10mm x 160 mm

10 Nos 598.00
2602 Common burnt clay F.P.S. (non modular) bricks class designation 7.5 1000 Nos 4590.00
2603 Common burnt clay F.P.S. (non modular) bricks class designation 5.0 1000 Nos 4080.00
2604 Weather/structural non sag elastomeric PU sealant (600ml Sausage) for joints in
RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum/ Alluminium work complying to ASTM
C920, DIN 18540-F & ISO 11600 incl all taxes
each 543.00
2605 Structural sealant - 6 mm x 12 mm metre 31.00
2606 Spacer tape 6.4 mm thick x 6 mm wide metre 21.00
2607 Weather Sealant - Non Staining (600 ml) each 332.00
2608 Weather Sealant - Normal (300 ml) each 102.00
2609 MS Brackets/Aluminium Alloy Brackets kg 104.00
2610 Silicon Gasket in Kg (Above 50 g / m) kg 484.00
2611 EPDM Gasket in Kg (Above 60 g / m) kg 156.00

2612 Anchor Fastner - M10 each 11.00

2613 SS Bolt with washer of different sizes for structural glazing / ACP Cladding
each 37.00

2614 SS Screws of sizes for structural glazing / ACP Cladding each 4.00
2615 Protective Tape metre 22.00
2616 GI flashing - 1.2 mm Thick kg 61.00
2617 6 mm thick High performance glass sqm 1030.00
2618 6 mm thick clear heat strengthened glass sqm 670.00
2619 6 mm thick clear heat strengthened glass each 132.00
2620 ARMS GS HD - Top Hung -20"- Type P- Couple pair 1390.00
2621 Connection Block for vision glass panel each 36.00
2622 Curtain wall striker for vision glass panel each 87.00
2623 Adjustable Fastening Pawl for vision glass panel each 36.00
2624 Corner drive for vision glass panel each 260.00
2625 Top wedge Block for vision glass panel each 122.00
2626 Glass wool of denisity @ 48 Kg / cum with black glass tissue (BGT) sqm 255.00
2627 SS Screws - # 8 x 19 each 7.00
2628 Weather Sealant - DC 789 cartridge 125.00
2629 Cement Board sqm 245.00
2630 Baker rod metre 6.00
2631 4 mm thick ACP sqm 1100.00
2632 Fire Stop metre 480.00
2634 GI/Aluminium Sheet (0.8 mm thick) kg 55.00
2635 GI Screws of gauge 10, length 25 mm for fixing cement fibre board to C section
each 3.15

2636 GI Screws of gauge 10, length 45 mm for fixing cement fibre board to C section
each 3.10

2637 Vapour barrier sqm 180.00

2640 Glass panes of required thickness having 120 minutes of fire resistance both
integrity and radiation control (EI 120) and minimum 20 minutes
of insulation (EI 20)
sqm 25500.00
2641 G.I U beading of 1.6 mm thick G.I sheet with ceramic tape. metre 250.00
2642 Ceramic tape 5 x20 mm size metre 400.00
2704 Aluminium Strip 40 mm wide and 2 mm thick kg 240.00
2708 Truf Paver (500 x 500 x 40 mm) sqm 510.00
2709 Ceremic Tiles Pieces for Crazy Flooring quintal 145.00
2710 White marble makrana second quality plain veined stone pieces for crazy flooring
quintal 160.00

2711 FS800H Grade Flooring Panel (Size 600 mm x600 mm x32 mm) each 740.00
2712 Zinc Electroplated Pedestals - 300 mm each 145.00
2713 Zinc Electroplated Pedestals - 450 mm each 210.00
2714 Zinc Electroplated Tube Stinger each 70.00
2715 Machine Screw for Fixing each 3.00
2750 8 mm thick granite stone tiles (mirror polished of all shades) sqm 690.00
2751 8 mm thick marble tiles (polished) Raj Nagar sqm 400.00
2752 Double charge vitrified tile polished finish of size 60 x 60 cm sqm 460.00

2753 Double charge vitrified tile polished finish of size 80 x 80 cm sqm 525.00
2754 Double charge vitrified tile polished finish of size 60 x 120 cm sqm 550.00
2755 Double charge vitrified tile polished finish of size 80 x 160 cm sqm 750.00
2756 Double charge vitrified tile polished finish of size 100 x 100 cm sqm 700.00
2757 Glazed vitrified tiles polished finish of size 60 x 60 cm sqm 500.00
2758 Glazed vitrified tiles polished finish of size 60 x 120 cm sqm 700.00
2759 Glazed vitrified tiles polished finish of size 80 x 80 cm sqm 650.00
2760 Glazed vitrified tiles polished finish of size 80 x 120 cm sqm 880.00
2761 Glazed vitrified tiles polished finish of size 120 x 120 cm sqm 1200.00
2762 Glazed Vitrified tiles Matt/Antiskid finish of size 60 x 60 cm sqm 480.00
2763 Glazed Vitrified tiles Matt/Antiskid finish of size 60 x 120 cm sqm 700.00
2764 Glazed Vitrified tiles Matt/Antiskid finish of size 80 x 80 cm sqm 650.00
2765 Glazed Vitrified tiles Matt/Antiskid finish of size 80 x 120 cm sqm 880.00
2766 Glazed Vitrified tiles Matt/Antiskid finish of size 120 x 120 cm sqm 1400.00
2901 Stone Aggregate (Single size): 100 mm nominal size cum 1360.00
2902 Stone Aggregate (Single size): 80 mm nominal size cum 1360.00
2903 Stone chippings/ screenings 4.75 mm nominal size cum 1400.00
2904 Stone chippings/ screenings 150 micron nominal size cum 1400.00
2908 Over burnt (Jhama) Brick Aggregate: 120 mm to 40 mm size cum 550.00
2909 Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm size cum 600.00
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum 1200.00
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 1200.00
2914 Solvent kg 30.00
2916 Paving Asphalt VG 10 of approved quality tonne 24500.00
3002 Polyvinyl chloride sheet 400 micron thick sqm 45.00
3004 Stone ware spouts 100 mm dia 60 cm long each 45.00
3050 Galvanised steel corrugated sheets quintal 6000.00
3051 Aluminium troughed profile sheet 0.56mm thick with center to center pitch of 200 mm,
depth of 32 mm, overall profile width1092 mm, cover width 1000mm)
sqm 549.00
3052 Aluminium troughed profile sheet 0.71mm thick with center to center pitch of 200 mm,
depth of 32 mm, overall profile width1092 mm, cover width 1000mm
sqm 698.00
3053 Aluminium troughed profile sheet 0.91mm thick with center to center pitch of 200 mm,
depth of 32 mm, overall profile width1092 mm, cover width 1000mm
sqm 895.00
3054 Aluminium profile sheet 0.56mm thick with center to center pitch of 175 mm, depth of
46mm, top crest width of 41mm, bottom valley width of 80mm, overall profile width of
1144mm, cover width 1050mm
sqm 730.00
3055 Aluminium profile sheet 0.71mm thick with center to center pitch of 175 mm, depth of
46mm, top crest width of 41mm, bottom valley width of 80mm, overall profile width of
1144mm, cover width 1050mm
sqm 924.00
3056 Aluminium profile sheet 0.91mm thick with center to center pitch of 175 mm, depth of
46mm, top crest width of 41mm, bottom valley width of 80mm, overall profile width of
1144mm, cover width 1050mm
sqm 1182.00
3057 Aluminium Circular(sinusoidal) profile sheet 0.56mm thick with center to center
pitch of 75 mm, depth of 19 mm, overall profile width 1250mm, cover width 1150mm sqm 520.00

3058 Aluminium Circular(sinusoidal) profile sheet 0.71mm thick with center to center
pitch of 75 mm, depth of 19 mm, overall profile width 1250mm, cover width 1150mm
sqm 670.00
3059 Aluminium Circular(sinusoidal) profile sheet 0.91mm thick with center to center
pitch of 75 mm, depth of 19 mm, overall profile width 1250mm, cover width 1150mm
sqm 870.00
3060 Precoated Aluminium troughed profile sheet 0.56mm thcik with center to center pitch of
200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm
sqm 636.00
3061 Precoated Aluminium troughed profile sheet 0.71mm thick with center to center pitch of
200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm
sqm 809.00
3062 Precoated Aluminium troughed profile sheet 0.91mm thick with center to center pitch of
200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm
sqm 1038.00
3063 Aluminium color coated profile sheet 0.56mm thick with center to center pitch of 175
mm, depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall
profile width of 1144mm, cover width 1050mm
sqm 846.00
3064 Aluminium color coated profile sheet 0.71mm thick with center to center pitch of 175
mm, depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall
profile width of 1144mm, cover width 1050mm

sqm 1071.00
3065 Aluminium color coated profile sheet 0.91mm thick ith center to center pitch of 175 mm,
depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall profile
width of 1144mm, cover width 1050mm

sqm 1370.00
3066 Aluminium profile sheet 0.56mm thick with center to center pitch of
177.5 mm, depth of 28.5 mm, 987mm overall profile width, cover width 900mm
sqm 680.00
3067 Aluminium profile sheet 0.71mm thick with center to center pitch of
177.5 mm, depth of 28.5 mm, 987mm overall profile width, cover width 900mm
sqm 872.00
3068 Precoated/Mill finish Aluminium plain ridges 0.71 mm TCT/plain and 500- 600 mm wide
metre 564.00

3069 Precoated/Mill finish Aluminium flashings/aprons 0.50mm TCT/plain and wide upto
600 mm metre 544.00

3070 Precoated/Mill finish Aluminium plain north light cuves metre 584.00
3071 Precoated/mill finish aluminium Barge board (Upto 200 mm) metre 487.00
3072 Precoated/Mill finish Aluminium crimp curve sqm 538.00
3073 Precoated/Mill finish Aluminium gutter metre 725.00
3074 Stainless steel self tapping screw of 6x50mm with SS hex cap and 3mm thick EPDM
seal 100 Nos 500.00

3075 EPDM washer 100 Nos 40.00

3076 Stainless steel bolts & nuts 10 mm dia and 125 mm long round head with slots
each 40.00

3080 Gunmetal non-return valve - vertical (screwed end) 25 mm dia each 400.00
3084 Gunmetal non-return valve - vertical (screwed end) 32 mm dia each 550.00
3088 Gunmetal non-return valve - vertical (screwed end) 40 mm dia each 750.00

3092 Gunmetal non-return valve - vertical (screwed end) 50 mm dia each 950.00
3096 Gunmetal non-return valve - vertical (screwed end) 65 mm dia each 1550.00
3213 Vitreous china Surgeon type wash basin of size 660x460 mm each 1100.00
3228 600x120 mm glass shelf with anodised aluminium angle frame,
C.P. brass brackets and guard rail of standard size each 300.00

3229 Vitreous china flat back wash basin 550x400 mm each 550.00
3300 Gunmetal non-return valve - vertical (screwed end) 80 mm dia each 2600.00
3311 C.I. sluice valve (with caps) class II : 100 mm dia each 2700.00
3314 C.I. sluice valve (with caps) class II : 125 mm dia each 3300.00
3317 C.I. sluice valve (with caps) class II : 150 mm dia each 4100.00
3320 C.I. sluice valve (with caps) class II : 200 mm dia each 8900.00
3321 C.I. sluice valve (with caps) class II : 250 mm dia each 15000.00
3326 C.I. sluice valve (with caps) class II : 300 mm dia each 18500.00
3327 15 mm Battery Based Sensor Pillar Cock each 6000.00
3617 C.P. Brass union 40mm dia each 210.00
3620 C.C.I. (spun) socketed soil, waste and vent pipe 1.80 metres long: 100 mm dia
each 1170.00

3621 C.C.I. (spun) socketed soil, waste and vent pipe 1.80 metres long: 75 mm dia
each 1150.00
3624 S.C.I. S&S bends with access door 100 mm dia each 400.00
3625 S.C.I. S&S bends with access door 75 mm dia each 300.00
3628 S.C.I. S&S bend 100 mm dia each 300.00
3629 S.C.I. S&S bend 75 mm dia each 200.00
3634 S.C.I. S&S heel rest sanitary bend 100 mm dia each 300.00
3635 S.C.I. S&S heel rest sanitary bend 75 mm dia each 280.00
3640 S.C.I. S&S single equal junctions 100x100x100 mm each 500.00
3641 S.C.I. S&S single equal junctions 75x75x75 mm each 350.00
3644 S.C.I. S&S single equal junctions with access door 100x100x 100 mm each 500.00
3645 S.C.I. S&S single equal junctions with access door 75x75x75 mm each 390.00
3650 S.C.I. S&S double equal junctions 100x100x100x100 mm each 630.00
3651 S.C.I. S&S double equal junctions 75x75x75x75 mm each 470.00
3654 S.C.I. S&S double equal junctions with access door 100x100x100x 100 mm
each 630.00

3655 S.C.I. S&S double equal junctions with access door 75x75x75x75 mm each 500.00
3660 S.C.I. S&S single unequal junctions 100x100x75 mm each 600.00
3664 S.C.I. S&S single unequal junctions with access door 100x100x75 mm each 650.00
3670 S.C.I. S&S double unequal junctions 100x100x75x75 mm each 800.00
3674 S.C.I. S&S double unequal junctions with access door 100x100x75x 75 mm
each 900.00

3681 S.C.I. S&S single equal invert branch of required degree 100x100x 100 mm dia
each 430.00

3682 S.C.I. S&S single equal invert branch of required degree 75x75x 75 mm dia each 330.00
3685 S.C.I. S&S double equal invert branch of required degree 100x100x100x 100 mm dia
each 540.00

3686 S.C.I. S&S double equal invert branch of required degree 75x75x75x 75 mm dia
each 450.00

3690 S.C.I. S&S single unequal invert branch of required degree 100x100x 75 mm dia
each 550.00

3695 S.C.I. S&S double unequal invert branch of required degree 100x100x 75x75 mm dia
each 730.00

3699 S.C.I. S&S, 75 mm offset for 75 mm dia pipe each 230.00

3707 S.C.I. S&S, 150 mm offset for 75 mm dia pipe each 300.00
3708 S.C.I. S&S, 150 mm offset for 100 mm dia pipe each 400.00
3712 S.C.I. S&S, 114 mm offset for 75 mm dia pipe each 310.00
3713 S.C.I. S&S, 114 mm offset for 100 mm dia pipe each 390.00
3716 S.C.I. S&S, 152 mm offset for 75 mm dia pipe each 360.00
3717 S.C.I. S&S, 152 mm offset for 100 mm dia pipe each 460.00
3728 S.C.I. S&S door pieces 100 mm dia each 410.00
3729 S.C.I. S&S door pieces 75 mm dia each 300.00
3733 S.C.I. S&S, Slotted Cowl (Terminal Guard) 100 mm each 300.00
3734 S.C.I. S&S, Slotted Cowl (Terminal Guard) 75 mm each 210.00
3738 S.C.I. S&S, collars 100 mm each 300.00
3739 S.C.I. S&S, collars 75 mm each 180.00
3746 S.C.I. S&S, 75 mm offset for 75 mm dia pipe each 220.00
3747 S.C.I. S&S, 75 mm offset for 100 mm dia pipe each 360.00
3749 Vitreous china toilet paper holder of standard size each 110.00
3860 560 mm dia cover with frame (Heavy duty) each 9100.00
3861 560 mm dia cover without frame (Heavy duty) each 5100.00
3862 SS pipe 316L grade as per IS 6911:2017 with press fit technology and conforming to
EN-10312 standard 15 mm outer dia metre 310.00
3863 SS pipe 316L grade as per IS 6911:2017 with press fit technology and conforming to
EN-10312 standard 22 mm outer dia metre 500.00

3864 SS pipe 316L grade as per IS 6911:2017 with press fit technology and conforming to
EN-10312 standard 28 mm outer dia metre 650.00

3865 SS pipe 316L grade as per IS 6911:2017 with press fit technology and conforming to
EN-10312 standard 35 mm outer dia metre 945.00

3866 SS pipe 316L grade as per IS 6911:2017 with press fit technology and conforming to
EN-10312 standard 42 mm outer dia metre 1160.00

3867 SS pipe 316L grade as per IS 6911:2017 with press fit technology and conforming to
EN-10312 standard 54 mm outer dia metre 1500.00

3868 Coupling/Socket fittings for 15 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard each 215.00

3869 Coupling/Socket fittings for 22 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard each 270.00

3870 Coupling/Socket fittings for 28 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard each 315.00

3871 Coupling/Socket fittings for 35 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard each 395.00

3872 Coupling/Socket fittings for 42 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard each 535.00

3873 Coupling/Socket fittings for 54 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard each 640.00

3874 Reducer for 22 mm X 15 mm outer Dia SS pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard each 255.00

3875 Reducer for 28 mm X 15 mm outer Dia SS pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard each 375.00

3876 Reducer for 28 mm X 22 mm outer Dia SS pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard each 310.00

3877 Reducer for 35 mm X 22 mm outer Dia SS pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard each 380.00

3878 Reducer for 35 mm X 28 mm outer Dia SS pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard each 470.00

3879 Reducer for 42 mm X 22 mm outer Dia SS pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard each 690.00

3880 Reducer for 42 mm X 28 mm outer Dia SS pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard each 720.00

3881 Reducer for 42 mm X 35 mm outer Dia SS pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard each 605.00

3882 Reducer for 54 mm X 28 mm outer Dia SS pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard each 990.00

3883 Reducer for 54 mm X 35 mm outer Dia SS pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard each 1030.00

3884 Reducer for 54 mm X 42 mm outer Dia SS pipe of grade 316L as per IS 6911:2017
and conforming to EN-10312 standard each 835.00

3885 Sleeve/Slip Coupling / Socket 15 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard each 375.00

3886 Sleeve/Slip Coupling / Socket 22 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard each 450.00

3887 Sleeve/Slip Coupling / Socket 28 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard each 520.00
3888 Sleeve/Slip Coupling / Socket 35 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard each 580.00

3889 Sleeve/Slip Coupling / Socket 42 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard each 670.00

3890 Sleeve/Slip Coupling / Socket 54 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard each 955.00

3891 Elbow 90° for 15 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and
conforming to EN-10312 standard each 305.00

3892 Elbow 90° for 22 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and
conforming to EN-10312 standard each 430.00

3893 Elbow 90° for 28 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and
conforming to EN-10312 standard each 575.00

3894 Elbow 90° for 35 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and
conforming to EN-10312 standard each 940.00

3895 Elbow 90° for 42 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and
conforming to EN-10312 standard each 1520.00

3896 Elbow 90° for 54 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and
conforming to EN-10312 standard each 2010.00

3897 Equal Tee for 15 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and
conforming to EN-10312 standard each 500.00

3898 Equal Tee for 22 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and
conforming to EN-10312 standard each 585.00

3899 Equal Tee for 28 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and
conforming to EN-10312 standard each 720.00

3900 Equal Tee for 35 mm outer dia SS pipe of grade 316L as per IS 6911:
2017 and conforming to EN-10312 standard each 895.00
3901 Equal Tee for 42 mm outer dia SS pipe of grade 316L as per IS 6911:
2017 and conforming to EN-10312 standard each 1250.00
3902 Equal Tee for 54 mm outer dia SS pipe of grade 316L as per IS 6911:
2017 and conforming to EN-10312 standard each 1500.00
3903 Reducing Tee for 22 mm X 15 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard each 575.00
3904 Reducing Tee for 28 mm X 15 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard each 715.00
3905 Reducing Tee for 28 mm X 22 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard each 710.00
3906 Reducing Tee for 35 mm X 15 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard each 900.00
3907 Reducing Tee for 35 mm X 22 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard each 905.00
3908 Reducing Tee for 35 mm X 28 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard each 915.00
3909 Reducing Tee for 42 mm X 22 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard each 1280.00
3910 Reducing Tee for 42 mm X 28 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard each 1265.00
3911 Reducing Tee for 42 mm X 35 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard each 1290.00

3912 Reducing Tee for 54 mm X 22 mm outer dia SS pipe of grade 316L

as per IS 6911:2017 and conforming to EN-10312 standard each 1570.00
3913 Reducing Tee for 54 mm X 28 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard each 1540.00
3914 Reducing Tee for 54 mm X 35 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard each 1550.00
3915 Reducing Tee for 54 mm X 42 mm outer dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 standard each 1500.00
3916 Stainless steel Female thread Tee for 15 mm outer dia X 1/2"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard each 560.00
3917 Stainless steel Female thread Tee for 22 mm outer dia X 1/2"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard each 615.00
3918 Stainless steel Female thread Tee for 22 mm outer dia X 3/4"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard each 690.00
3919 Stainless steel Female thread Tee for 28 mm outer dia X 1/2"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard each 730.00
3920 Stainless steel Female thread Tee for 28 mm outer dia X 3/4"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard each 755.00
3921 Stainless steel Female thread Tee for 28 mm outer dia X 1"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard each 840.00
3922 Stainless steel Female thread Tee for 35 mm outer dia X 1/2" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard each 845.00

3923 Stainless steel Female thread Tee for 35 mm outer dia X 1-1/4" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard
each 1159.00
3924 Stainless steel Female thread Tee for 42 mm outer dia X 1-1/4" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard
each 1346.00
3925 Stainless steel Female thread Tee for 54 mm outer dia X 1-1/2" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

each 1920.00
3926 Stainless steel Female thread Tee for 54 mm outer dia X 2" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard
each 2307.00
3927 Stainless steel Female threaded Connector/Adapter for 15 mm outer dia X 1/2" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312
standard
each 440.00
3928 Stainless steel Female threaded Connector/Adapter for 22 mm outer dia X 1/2" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312
standard
each 495.00
3929 Stainless steel Female threaded Connector/Adapter for 22 mm outer dia X 3/4" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312
standard
each 580.00
3930 Stainless steel Female threaded Connector/Adapter for 28 mm outer dia X 1" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312
standard
each 955.00
3931 Stainless steel Female threaded Connector/Adapter for 35 mm outer dia X 1-1/4"
nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-
10312 standard
each 1020.00
3932 Stainless steel Female threaded Connector/Adapter for 42 mm outer dia X 1-1/2"
nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-
10312 standard
each 1565.00
3933 Stainless steel Female threaded Connector/Adapter for 54 mm outer dia X 2" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312
standard
each 2400.00
3934 Stainless steel Male threaded Connector/ Adapter for 15 mm outer dia X 1/2" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312
standard
each 405.00
3935 Stainless steel Male threaded Connector/ Adapter for 22 mm outer dia X 1/2" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312
standard
each 480.00
3936 Stainless steel Male threaded Connector/ Adapter for 22 mm outer dia X 3/4" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312
standard
each 505.00
3937 Stainless steel Male threaded Connector/ Adapter for 28 mm outer dia X 1" nominal dia
threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard
each 665.00
3938 Stainless steel Male threaded Connector/ Adapter for 35 mm outer dia X 1-1/4" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312
standard
each 970.00
3939 Stainless steel Male threaded Connector/ Adapter for 42 mm outer dia X 1-1/2" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 each 1415.00
standard

3940 Stainless steel Male threaded Connector/ Adapter for 54 mm outer dia X 2" nominal dia
threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard
each 1895.00
Female Threaded Elbow 90°
3941 SS Female Threaded Elbow 90° for 15 mm outer dia X 1/2" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard
each 640.00
3942 SS Female Threaded Elbow 90° for 22 mm outer dia X 3/4" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard
each 860.00
3943 SS Female Threaded Elbow 90° for 28 mm outer dia X 1" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to
EN-10312 standard
each 1180.00
3944 SS Female Threaded Elbow 90° for 35 mm outer dia X 1-1/4" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

each 1917.00
3945 SS Female Threaded Elbow 90° for 42 mm outer dia X 1-1/2" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard
each 2088.00
3946 SS Female Threaded Elbow 90° for 54 mm outer dia X 2" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to
EN-10312 standard
each 3227.00
3947 SS Male Threaded Elbow 90° for 15 mm outer dia X 1/2" nominal dia threaded of grade
316L as per IS 6911:2017 and conforming to
EN-10312 standard
each 525.00
3948 SS Male Threaded Elbow 90° for 22 mm outer dia X 3/4" nominal dia threaded of grade
316L as per IS 6911:2017 and conforming to
EN-10312 standard
each 790.00
3949 SS Male Threaded Elbow 90° for 28 mm outer dia X 1" nominal dia threaded of grade
316L as per IS 6911:2017 and conforming to EN-10312 standard
each 1045.00
3950 SS Male Threaded Elbow 90° for 35 mm outer dia X 1-1/4" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to
EN-10312 standard
each 1440.00
3951 SS Male Threaded Elbow 90° for 42 mm outer dia X 1-1/2" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to
EN-10312 standard
each 2635.00
3952 SS Male Threaded Elbow 90° for 54 mm outer dia X 2" nominal dia threaded of grade
316L as per IS 6911:2017 and conforming to EN-10312 standard
each 2998.00
3953 Stainless steel Cap for 15 mm outer dia pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard each 320.00

3954 Stainless steel Cap for 22 mm outer dia pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard each 415.00

3955 Stainless steel Cap for 28 mm outer dia pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard each 515.00

3956 Stainless steel Cap for 35 mm outer dia pipe of grade 316L as per
IS 6911:2017 and conforming to EN-10312 standard each 720.00

3957 Stainless steel Cap for 42 mm outer dia pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard each 1565.00

3958 Stainless steel Cap for 54 mm outer dia pipe of grade 316L as per IS 6911:2017 and
conforming to EN-10312 standard each 1720.00

3959 Stainless steel Pipe Bridge for 15 mm outer dia pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard each 415.00

3960 Stainless steel Pipe Bridge for 22 mm outer dia pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard each 1110.00

3961 Stainless steel Pipe Bridge for 28 mm outer dia pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard each 1526.00

3962 SS Male Union for 15 mm outer dia X 1/2" nominal dia threaded of grade 316L as per
IS 6911:2017 and conforming to EN-10312 standard

each 885.00
3963 SS Male Union for 22 mm outer dia X 1/2" nominal dia threaded of grade 316L as per
IS 6911:2017 and conforming to EN-10312 standard
each 895.00
3964 SS Male Union for 22 mm outer dia X 3/4" nominal dia threaded of grade 316L as per
IS 6911:2017 and conforming to EN-10312 standard
each 1025.00
3965 SS Male Union for 28 mm outer dia X 1" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard
each 1805.00
3966 SS Male Union for 35 mm outer dia X 1-1/4" nominal dia threaded of grade 316L as
per IS 6911:2017 and conforming to EN-10312 standard
each 1885.00
3967 SS Male Union for 42 mm outer dia X 1-1/2" nominal dia threaded of grade 316L as
per IS 6911:2017 and conforming to EN-10312 standard
each 2130.00
3968 SS Male Union for 54 mm outer dia X 2" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 standard
each 3680.00
3969 SS Female Union for 22 mm outer dia X 3/4" nominal dia threaded of grade 316L as
per IS 6911:2017 and conforming to EN-10312 standard
each 950.00
3970 SS Female Union for 28 mm outer dia X 1" nominal dia threaded of grade 316L as per
IS 6911:2017 and conforming to EN-10312 standard each 1280.00

3971 SS Female Transition Elbow/ FTE for 15 mm outer dia X 1/2" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard
each 649.00
3972 SS Female Transition Elbow/ FTE for 22 mm outer dia X 1/2" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard
each 900.00
3973 SS Female Transition Elbow/ FTE for 22 mm outer dia X 3/4" nominal dia threaded of
grade 316L as per IS 6911:2017 and conforming to EN-10312 standard
each 870.00
3991 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for small series casement
window/door frame, sash, mullion & small series sliding window frame
metre 70.00
3992 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big series casement
window/door frame, sash, mullion, big & small series sliding window frame
metre 75.00

3993 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big series
casement door sash metre 100.00
3994 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big series
sliding window / door sash metre 90.00
3995 G.I fasteners 100 x 8 mm each 15.00
4001 Stainless steel (Grade-304)hollow section round/square tubes kg 230.00
4002 Stainless steel bolts/square bar and plates kg 120.00
4006 Pressed steel door frames (mild steel sheet 1.60 mm) Profile "B" metre 200.00
4007 Pressed steel door frames (mild steel sheet 1.60 mm) Profile "C" metre 220.00
4008 Pressed steel door frames (mild steel sheet 1.60 mm) Profile "E" metre 250.00
4009 Mild steel tubes hot finished welded type kg 60.00
4010 Mild steel tubes hot finished seamless type kg 70.00
4011 Mild steel tubes electric resistant or induction butt welded kg 50.00
4012 Circular C.I. Box for ceiling fan internal dia 140 mm, 73 mm height, toplid of 1.5mm
thick MS sheet each 55.00
4013 Pulley 40 mm dia each 35.00
4201 Aluminium primer litre 120.00
4202 Red oxide Zinc chromate primer litre 120.00
4203 Copper acetate kg 300.00
4204 Hydrochloric acid kg 35.00
4205 Copper chloride kg 300.00
4206 Copper nitrate kg 210.00
4207 Ammonium chloride kg 22.00
5001 Mobil oil litre 318.00
5050 SS pipe 304 grades with press fit technology as per JIS 3448 Standard
48.60 mm outer dia metre 680.00

5743 Coloured inter locking C.C. paver Block sqm 500.00

5744 EPS blocks kg 150.00
5745 GI woven mesh of aperture 5.45 mm (with wire of dia 0.90 mm kg 60.00
5746 SR adhesive for joining EPS blocks kg 180.00
5747 Factory made single extruded WPC (Wood Polymer Composite) solid door/window,
clerestory windows & other Frames/Chowkhat of frame size 45 x 70 mm
metre 375.00
5748 Factory made single extruded WPC (Wood Polymer Composite) solid door/window,
clerestory windows & other Frames/Chowkhat of frame size 45 x 85 mm
metre 525.00
5749 Factory made single extruded WPC (Wood Polymer Composite) solid door/window,
clerestory windows & other Frames/Chowkhat of frame size 50 x 100 mm
metre 540.00
5750 Factory made single extruded WPC (Wood Polymer Composite) solid door/window,
clerestory windows & other Frames/Chowkhat of frame size 50 x 125 mm
metre 630.00
5751 Factory made single extruded WPC (Wood Polymer Composite) solid door/window,
clerestory windows & other Frames/Chowkhat of frame size 65 x 100 mm
metre 650.00
5752 Factory made single extruded WPC (Wood Polymer Composite) solid door/window,
clerestory windows & other Frames/Chowkhat of frame size 65 x 125 mm

metre 835.00
5753 Factory made single extruded WPC (Wood Polymer Composite) solid door/window,
clerestory windows & other Frames/Chowkhat of frame
size 65 x 150 mm metre 1010.00
5754 Factory made single extruded WPC (Wood Polymer Composite) solid
plain flush door shutter 30mm thick sqm 2800.00
5755 Factory made single extruded WPC (Wood Polymer Composite) solid
plain flush door shutter 35 mm thick sqm 3250.00
5756 Factory made single extruded WPC (Wood Polymer Composite) solid
plain white colored board of 18 mm thick sqm 1750.00
5757 Factory made single extruded WPC (Wood Polymer Composite) solid
plain white colored board of 25 mm thick sqm 2360.00
5758 Factory made single extruded WPC (Wood Polymer Composite) solid
plain white colored board of 6 mm thick sqm 600.00
5759 Factory made single extruded WPC (Wood Polymer Composite) solid
plain white colored board of 12 mm thick sqm 1020.00
5760 Factory made 18 mm thick single extruded WPC (Wood Polymer
Composite) solid plain white colour board Jali sqm 2260.00
5761 PVC laminated foil of minimum thickness of 14 microns of approved
design sqm 125.00
5762 16mm thick extruded terracotta tiles of grey colour of size 300 x 595mm sqm 2152.80
5763 16mm thick extruded terracotta tiles of other than grey colour of size
300 x 595mm sqm 1991.30
5764 24mm thick extruded terracotta tiles of grey color of size 309x1190 mm and length
1190mm sqm 2475.00

5765 24mm thick extruded terracotta tiles of grey color of size 309x1190 mm
and length 1190mm sqm 2260.00
5766 Melamine wood sealer litre 190.00
5767 Melamine solvent/thinner litre 120.00
5768 Sanding cloth 150 mm wide metre 60.00
5769 Sandpapers of assorted gratings Nos 22.00
5770 Melamine wood filler putty kg 120.00
5771 Dhoti (worm out soft cotton cloth) Nos 25.00
5772 Grease kg 180.00
5773 Shutttering oil litre 90.00
5774 GP-2 cementeous compound kg 20.00
5775 Galavinised MS L-shape level adjuster of size 76x25x25x1.6 mm each 15.00
5776 12x50 mm long dash fastener each 35.00
5777 Galvanized MS Z Cleat of size 25 x 37 x 25 x 1.6 mm with precut hole on
both 25 mm flange each 12.00
5778 15mm tegular/butt edged without perforation plain/designer light weight
calcium silicate Anti-Microbial Bio-Safe coated false ceiling tiles of
size 595x595 mm sqm 830.00
5779 Grinding buffers day 250.00
5780 4mm thick sheet of aluminium alloy grade 6061 (type-6) for aluminuum
formwork kg 250.00
5781 Fabrication cost for formwork panels and special including computerised
designing for fabrication and mock testing before transportation to site
of work. kg 35.00
5782 Packaging and carting of aluminium sheet/plate to the site of work tonne 5000.00
5783 MS working platform for aluminium formwork kg 46.00

6001 White marble slab Makrana second quality plain veined 18 mm thick sqm 1450.00
6007 Pink marble slab plain 18 mm thick sqm 685.00
6010 Udaypur green marble slab plain 18 mm thick sqm 620.00
6019 Black Zebra marble slab plain 18 mm thick sqm 1000.00
6501 Sand zone V (Jamuna) cum 1300.00
7001 Brass 100mm mortice latch and lock with 6 levers without pair of handles
each 195.00

7003 Pair of Anodised Aluminium lever handles for 100 mm mortice latch and lock
each 215.00

7004 Vitreous china flat back wash basin 450x300 mm each 280.00
7005 Vitreous china 10 litres low level cistern without fittings each 700.00
7006 Vitreous china 10 litres low level cistern with fittings each 1200.00
7008 F.P.S. (non modular) clay fly ash bricks class designation 7.5 1000 Nos 4500.00
7009 12.5 mm thick tapered edge plain gypsum plaster borad confirming to IS 2095 (Part
1):2011 sqm 140.00

7010 Galvanised Steel ceiling section (size 80x26x0.50 mm) metre 46.00
7011 Galvanised Steel perimetre Channel (Size 20x27x30x0.50 mm) metre 22.00
7012 Galvanised Steel intermediate Channel (Size 15x45x15x0.90 mm) metre 38.00
7013 Galvanised Steel angle hanger (Celling angle) (Size 25x10x0.50 mm) metre 12.00
7014 Galvanised Steel connecting clips (2.64 mm dia and 230 mm long GI wire)
each 4.00
7015 Galvanised Steel soffit cleat (Size 27x37x25x0.60 mm) each 3.00
7016 Joint filler kg 24.00
7017 Joint finisher kg 21.00
7018 Joint tape roll roll 90.00
7019 Dash fastener / Chemical fastener each 12.50
7020 All drive screws (for gypsum board) 100 Nos 58.00
7021 Primer (for gypsum board) litre 70.00
7022 Chlorpyriphos 20% E.C. / Lindane 20% E.C. litre 150.00
7023 Chromium plated brackets (curtain rods) each 8.00
7024 Acid Proof cement tonne 7800.00
7025 Self tapping pan head nickel coated mild steel screws of size 13 x
3.2 mm 1000 Nos 480.00

7026 Fibre joint tape 50 mm wide (90 metre) roll each roll 150.00
7027 M.S. Butt hinges 125x90x4 mm 10 Nos 105.00
7028 12.5 mm thick Fully Perforated gypsum board sqm 380.00
7029 Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire
0.63 mm sqm 250.00

7031 12.5 mm thick tapered edge moisture resistant plain gypsum plaster board
confirming to IS 2095 (Part 1):2011 sqm 250.00

7032 Frosted glass sheet of nominal thickness 4 mm (weighing not less than 10
kg/sqm) sqm 420.00

7033 Nickel plated M.S. pipe 25 mm dia metre 76.00

7034 Nickel plated M.S. pipe 20 mm dia metre 72.00
7035 Nickel plated M.S. Brackets for curtain rod 20 mm each 7.00
7036 Nickel plated M.S - Brackets for curtain rod 25 mm each 8.00
7040 Oxidised mild steel screws 35 mm 100 Nos 48.00

7042 Mild steel conduit pipe (heavy type) ISI marked-20 mm dia metre 42.00
7043 Mild steel conduit pipe (heavy type) ISI marked-25 mm dia metre 54.00
7044 Rolling shutters of 80x0.90 mm laths sqm 1300.00
7045 Rolling shutters of 80x1.2 mm laths sqm 1375.00
7046 Top cover of Rolling shutters 0.90 mm thick metre 450.00
7047 Top cover of Rolling shutters 1.20 mm thick metre 560.00
7048 Rawl plug 50 mm (designation 10 nos) each 22.00
7049 Teak wood lipping of size 25x3 mm in pelmets metre 12.00
7050 PU Primer sqm 50.00
7051 40 mm (average) PU spray having 40-45 kg/m3 density sqm 350.00
7052 GI wire netting 3/4" x 24 G sqm 26.00
7053 400 G polythene sheet sqm 12.00
7055 Flat pressed 3 layer and graded particle board (medium density) Grade 1 conforming to
IS : 3087 - 18 mm thick sqm 430.00

7056 Aluminium tee channel (heavy duty) with rollers and stop end metre 100.00
7059 Aluminium hanging floor door stopper with twin rubber & stopper each 40.00
7060 Hydraulic door closer tubular type Aluminium section body each 560.00
7063 Oxidised M.S.casement stay (straight peg type) 300 mm not less than
0.20 kg each 35.00

7064 Oxidised M.S.casement stay (straight peg type) 250 mm not less than
0.15 kg each 30.00

7065 Oxidised M.S. casement stay (straight peg type) 200 mm not less than
0.12 kg each 25.00

7068 Extra for providing grilled rolling shutters with 8 mm dia M.S. rod sqm 500.00
7070 Chequered precast cement concrete tiles 22 mm thick using marble chips of size 6mm
- Light shade using white cement sqm 370.00
7071 White marble Raj Nagar plain 18 mm thick upto 0.50 sqm area sqm 550.00
7072 Wall mounted water closet of size 780 x 370x690 mm each 5500.00
7073 Adjustable Vitreous China Cistern with fittings of flushing capacity 3 litre/ 6litre
9adjustibla to 4 litre/8litre) each 1600.00

7074 White Vetrious China Waterless Urinal of size 600x330x315 mm each 9000.00
7075 Cistern with fittings for Waterless Urinal each 2200.00
7076 Battery based infrared sensor operated white Vitreous Urinal of aprox. size
610x390x370 mm each 4500.00

7077 Acid and alkali resistant tiles 300x300 mm size, 10 mm thick 10 Nos 500.00
7087 S.C.I. Tee 150 mm each 570.00
7090 Expanded polystyrene type N- Normal 50 mm thick sqm 120.00
7091 Expanded polystyrene type - SE 50 mm thick sqm 140.00
7095 Stainless steel kitchen sink - with drain board 510x1040 mm bowl depth 250 mm
each 3000.00

7096 Stainless steel kitchen sink - with drain board 510 x 1040 mm bowl depth 225 mm
each 3500.00

7097 Stainless steel kitchen sink - with drain board 510 x 1040 mm bowl depth 200 mm
each 3200.00

7098 Stainless steel kitchen sink - with drain board 510x1040 mm bowl depth 178 mm
each 3000.00

7101 Stainless steel kitchen sink - without drain board 610x510 mm bowl depth 200 mm
each 2200.00

7102 Stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm
each 1500.00

7103 Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm
each 1200.00

7104 Coloured Orissa pattern W.C. pan 580x440 mm each 1600.00

7105 Coloured Pedestal type W.C. pan 580x440 mm (European type) each 850.00
7106 Coloured Vitreous china 10 lit. low level cistern each 1000.00
7107 Coloured (other than black) solid P.V.C. seat in European W.C. pan each 350.00
7112 Circular shape 450 mm dia Mirror with Plastic moulded frame each 400.00
7113 Rectangular shape 453x357 mm Mirror with Plastic moulded frame each 290.00
7114 Oval shape 450x350 mm (outer dimensions) Mirror with Plastic moulded frame
each 290.00

7115 Rectangular shape 1500x450 mm Mirror with Plastic moulded frame each 670.00
7116 Hard board 6 mm thick sqm 115.00
7117 Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less
than 700 mm i/c PVC waste fittings each 25.00

7118 Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with length not less
than 700 mm i/c PVC waste fittings each 33.00

7119 Flexible (coil shaped) PVC waste pipe for sink and wash basin 32mm dia with length
not less than 700 mm i/c PVC waste fittings each 35.00

7120 Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia with length
not less than 700 mm i/c PVC waste fittings each 35.00

7121 Bottle Trap each 620.00

7122 CP Brass Single lever telephonic wall mixer of approved make each 4500.00
7123 Coloured High density polyethylene / poly propylene 10 lit. (full flush) capacity
controlled low level flushing cistern with fittings each 550.00

7126 White Vitreous china 10 litre (full flush) capacity controlled low level flushing cistern
with all fittings each 700.00

7127 Coloured Vitreous china 10 litre (full flush) capacity controlled low level flushing cistern
with all fittings each 1150.00
7128 S.W. intercepting trap 100 mm dia each 185.00
7129 S.W. intercepting trap 150 mm dia each 240.00
7130 Rectangular shape 600x450 mm precast R.C.C. manhole cover with frame - L.D. - 2.5
each 675.00

7131 Square shape 450x450 mm precast R.C.C. manhole cover with frame -
L.D. - 2.5 each 575.00

7132 Circular shape 450 mm dia precast R.C.C. manhole cover with frame -
L.D. - 2.5 each 575.00

7133 Rectangular shape 500x500 mm precast R.C.C. manhole cover with frame - M.D. - 10
each 670.00

7134 Circular shape 500 mm dia precast R.C.C. manhole cover with frame- M.D.-10
each 575.00

7135 Circular shape 560 mm dia precast R.C.C. manhole cover with frame -
H.D. - 20 each 880.00

7136 Circular shape 560 mm dia precast R.C.C. manhole cover with frame -
E.H.D. - 35 each 1170.00

7137 Factory made 35 mm thick shutters with laminated veneer lumber styles & rails as
per TADS 15:1995 and panels of 12 mm thick plain type-I, medium density flat pressed
three layer, graded particle board (FPT-I) as per IS:3087 bonded with BWP type
synthetic resin adhesive, as per IS:848

sqm 1620.00
7139 Factory made 35 mm thick shutters with laminated veneer lumber styles & rails as
per TADS 15:1995 and panels of 12 mm thick both sides prelaminated type-I,
medium density flat pressed three layer, graded particle board (FPT-I) as per
IS:3087 bonded with BWP type synthetic resin adhesive, as per IS:848

sqm 1720.00
7143 Factory made 35 mm thick shutters with laminated veneer lumber styles & rails as
per TADS 15:1995 and panels of 12 mm thick one side prelaminated type-I, and
other side balancing lamination, medium density flat pressed three layer, graded
particle board (FPT- I) as per IS:3087 bonded with BWP type synthetic resin adhesive,
as per IS:848

sqm 1910.00
7151 Factory made 30 mm thick shutters with laminated veneer lumber styles & rails as
per TADS 15:1995 and panels of sheet glass using 10 kg/ sqm glass panes
sqm 1620.00
7154 Factory made 35 mm thick shutters with laminated veneer lumber styles & rails
as per TADS 15:1995 and panels of galvanised wire gauge with average width of
aperture 1.4 mm in both directions with wire of dia 0.63 mm

sqm 1620.00
7155 Factory made 30 mm thick shutters with laminated veneer lumber styles & rails
as per TADS 15:1995 and panels of galvanised wire gauge with average width of
aperture 1.4 mm in both directions with wire of dia 0.63 mm

sqm 1430.00
7157 Laminated veneer lumber confirming to TADS 15:1995 manufactured in factory in
frames of doors, windows 10 cudm 700.00

7178 Chemical ASTMC-type I kg 95.00

7181 C.I. pile shoe kg 48.00
7182 M.S. clamps for pile shoe of 35 kg per pile kg 43.00
7183 Bentonite of 35 kg per pile tonne 2800.00
7184 Oxidised M.S. safety chain (weighing not less than 450 gms) for door each 57.00
7187 C.I. grating 150 mm dia, weighing not less than 440 gm each 27.00
7188 U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 75 mm dia
metre 70.00

7189 U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 110 mm dia
metre 130.00

7190 U-PVC pipes (working pressure 4 kg / cm²) Rubber (Seal) Ring 75 mm dia
each 8.00

7191 U-PVC pipes (working pressure 4 kg / cm²) Rubber (Seal) Ring 110 mm dia
each 11.00

7192 uPVC coupler for UPVC drainage pipes 75 mm each 18.00

7193 uPVC coupler for UPVC drainage pipes 110 mm each 39.00
7194 uPVC pushfit coupler (single) 75 mm thick each 18.00
7195 uPVC pushfit coupler (single) 110 mm thick each 32.00
7196 uPVC single equal Tee (without door) 75x75x75 mm each 46.00
7197 uPVC single equal Tee (without door) 110x110x110 mm each 81.00
7198 uPVC single equal Tee (with door) 75x75x75 mm each 59.00
7199 uPVC single equal Tee (with door) 110x110x110 mm each 92.00

7208 UPVC bend 87.5° 75 mm bend each 35.00

7209 UPVC bend 87.5° 110 mm bend each 59.00
7212 UPVC plain shoe 75 mm each 27.00
7213 UPVC plain shoe 110 mm each 47.00
7214 UPVC pipe clip 75 mm each 15.00
7215 UPVC pipe clip 110 mm each 14.00
7216 Self-Drilling/Self-Tapping Screws M-6 25mm long each 3.00
7217 SS anchor Fasteners (RCC / Brick) – M-8x75mm/M-10x100mm each 70.00
7218 MS Polymer Sealant Adhesive litre 1200.00
7219 SS Double Clip at intermediate each 7.00
7220 SS Single clip at top and bottom each 4.00
7221 Self-Drilling/Self-Tapping Screws 5.5x25 mm long each 3.00
7222 SS Anchor Fasteners (RCC / Brick) – M-8x100 mm each 70.00
7224 Concrete hardener kg 20.00
7225 Release agent litre 200.00
7226 Sealer kg 260.00
7227 PU resin top coat kg 225.00
7231 Resin Bonded Glass wool 16 kg/m³ : 50 mm thick sqm 90.00
7232 Resin Bonded Glass wool 24 kg/m³ : 50 mm thick sqm 130.00
7233 Fibre glass tissue reinforcement Type II Grade i sqm 75.00
7236 Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement
sqm 225.00

7237 Precast chequered cement tiles 22 mm thick medium shade using 50% white
cement 50% ordinary cement sqm 335.00

7238 High Albedo paint kg 215.00

7239 Epoxy paint litre 215.00
7240 Fire retardant paint litre 240.00
7241 Melamine polish litre 300.00
7244 Table rubbed polished stone 18 mm thick (75x50cm) Agaria Marble stone - 18 mm
thick sqm 1500.00

7245 Table rubbed polished stone 18mm thick (75x50cm) Granite stone- 18 mm thick
sqm 1800.00
7246 Vertical load testing (initial) of piles in accordance with IS : 2911 (Part-IV)
including installation of loading platform and preparation of pile head or construction of
test cap and dismantling of test cap after test etc. complete as per specification and up
to 50 tonne capacity pile

per test 38500.00

7247 Vertical load testing (initial) of piles in accordance with IS : 2911 (Part-IV)
including installation of loading platform and preparation of pile head or construction of
test cap and dismantling of test cap after test etc. complete as per specification &
above 50 tonne and up to 100 tonne

per test 43000.00

7248 Vertical load testing (initial) of piles in accordance with IS : 2911 (Part-IV)
including installation of loading platform and preparation of pile head or construction of
test cap and dismantling of test cap after test etc. complete as per specification & group
of two or more up to 50 tonne

per test 49500.00

7249 Cyclic vertical load testing of piles in accordance with IS : 2911 (Part- IV) including
preparation of pile head etc. for Single pile up to 50 tonne capacity per test 13800.00

7250 Cyclic vertical load testing of piles in accordance with IS : 2911 (Part- IV) including
preparation of pile head etc. for Single pile above 50 tonne capacity pile and up to 100
tonne capacity pile
per test 22800.00
7251 Cyclic vertical load testing of piles in accordance with IS : 2911 (Part- IV) including
preparation of pile head etc. for Group of two piles up to 50 tonne capacity each
per test 28500.00
7252 Lateral load testing of single pile in accordance with IS : 2911 part -IV for determining
safe allowable lateral load on pile up to 50 tonne capacity

per test 13800.00

7253 Lateral load testing of single pile in accordance with IS : 2911 part -IV for determining
safe allowable lateral load on pile above 50 tonne capacity
per test 23100.00
7254 Hardening compound litre 36.00
7255 Road marking paint (spirit based) litre 115.00
7256 Superior quality road marking paint (water based) litre 130.00
7257 C.P. Brass bibcock 15 mm each 300.00
7258 C.P. Brass long nose bibcock 15 mm each 500.00
7259 C.P. Brass long body bibcock 15 mm each 500.00
7260 C.P. Brass stop cock (concealed) 15 mm each 420.00
7261 C.P. Brass angle valve 15 mm each 350.00
7266 Pressed clay tiles 20mm thick 250x250 mm size 1000 Nos 8000.00
7267 Plain ceiling tiles (BWP type phenol formaldehyde synthetic resin bonded)
(600x600x12 mm) each 105.00

7268 Semi perforated ceiling tiles (600x600x12 mm) each 100.00

7269 25 mm thick particle board sqm 435.00
7270 30 mm thick prelaminated flush door shutter sqm 860.00
7271 Second class teak wood lipping 25 mm wide x 12 mm thick metre 28.00
7272 25 mm thick melamine faced prelaminated three layer particle board sqm 900.00
7273 Resin Bonded Rockwool 48 kg/m3 sqm 110.00
7274 Glass wool 50 mm thick sqm 200.00
7280 Waste plastic additive tonne 38100.00
7281 Chemical ASTMC-type II kg 155.00
7295 Granite of colour black, cherry/ruby red 18 mm thick (slab area upto
0.50 sqm) sqm 1800.00
7296 Granite of colour black, cherry/ruby red 30 mm thick (slab area upto
0.50 sqm) sqm 1900.00

7297 Granite of all colour except black, cherry/ruby red 18 mm thick (slab area upto 0.50
sqm) sqm 1000.00

7298 Granite of colour black, cherry/ruby red 18 mm thick (slab area above
0.50 sqm) sqm 2000.00

7299 Granite of all colour except black, cherry/ruby red 18 mm thick (slab area above 0.50
sqm) sqm 1200.00

7300 Granite of all colour except black, cherry/ruby red 30 mm thick (slab area above 0.50
sqm) sqm 2100.00

7306 Aluminium T or L sections kg 190.00

7307 For flush door shutters Extra for providing teak veneering on one side instead of
commercial veneering sqm 305.00

7309 Paving Asphalt of grade VG-30 of approved quality tonne 38150.00

7312 Expandable fastener with plastic sleeve and M.S. screws : 25 mm long each 10.00
7313 Expandable fastener with plastic sleeve and M.S. screws : 32 mm long each 10.00
7314 Expandable fastener with plastic sleeve and M.S. screws : 40 mm long each 13.00
7315 Expandable fastener with plastic sleeve and M.S. screws. 50 mm long each 14.00
7318 Plasticizer / super plasticizer kg 29.00
7319 Wall form panel 1250x500 mm each 860.00
7320 Tie bolt 12 mm dia 100 mm length each 38.00
7321 Tie bolt 12 mm dia 150 mm length each 48.00
7322 Tie bolt 20 mm dia 150 mm length each 57.00
7323 Tie bolt 20 mm dia 225 mm length each 67.00
7324 Spring coil 12 mm each 15.00
7325 Plastic cone 12 mm dia each 15.00
7326 Corner angle 45x45x5 mm 1.50 m long each 240.00
7327 100 mm channel shoulder 2.5 m long each 910.00
7328 Double clip (bridge clip) each 76.00
7329 Single clip each 59.00
7330 M.S. tube 40 mm dia metre 215.00
7331 Wall form panel 1250x450 mm each 860.00
7332 Corner angle 45x45x5 mm 2.50 m long each 255.00
7333 Column clamp 450x1070 mm each 965.00
7334 Prop 2 m ( 2-3.5 m) each 635.00
7335 Binding wire kg 46.00
7336 Lock Bar (E 250) - 10 thick MS Plate kg 76.00
7338 Gun metal cramp kg 315.00
7339 Stainless steel cramp kg 290.00
7340 Stainless steel pin kg 182.00
7342 Adjustable span ESO+SI (2.35-3.40) each 1480.00
7343 Adjustable telescopic prop 3 m (2.02-3.75 m) each 955.00
7344 Beam clamp 300-380 mm (450-1070 mm) each set 355.00
7345 Prop 4 m each 910.00
7346 Double coupler each 46.00
7347 Cadmium plated full threaded steel screws (30x4 mm dia) 100 Nos 27.00
7348 Aluminium washer 2 mm thick 15 mm dia 100 Nos 10.00
7349 12 mm M.S. 'U' beading metre 14.00
7354 Plastic encapsulated M.S. foot rest 30x20x15 cm each 110.00
7358 Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with fittings, accessories
and flush pipe) each 575.00

7359 P.V.C. automatic flushing cistern 5 litre capacity each 450.00

7361 P.V.C. automatic flushing cistern 10 litre capacity each 500.00
7363 15 mm C.P. brass tap with elbow operation lever each 430.00
7364 White glazed fire clay draining board 600x450x25 mm each 500.00
7366 Glass reinforced Gypsum ( GRG) plaster board 12.5 mm thick confirming to IS 2095
(Part 3):1996 sqm 240.00

7367 Galvanised M.S. sheet 0.5 mm thick pressed channel section of size 50x32 mm
metre 60.00

7368 GFRG Panel of 124 mm thick sqm 845.00

7369 Galvanised M.S. sheet 0.50 mm thick pressed stud : 48x34x36 mm metre 70.00
7375 G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Single lipped
urinal each 445.00

7376 G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of two
lipped urinals each 765.00

7377 G.i. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of three
lipped urinals each 1050.00

7378 G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of four
lipped urinals each 1430.00

7379 White vitreous china clay half stall urinal flat back 580x380x350 mm or angle back
450x375x350 mm with waste fittings as per IS:2556 each 865.00

7380 Precast R.C.C. grating with frame 500x450 mm horizontal grating each 620.00
7381 Precast R.C.C. grating with frame 450x100 mm vertical grating each 235.00
7382 Bitumen emulsion rapid setting (R.S.) confirming to IS : 8887 tonne 18250.00
7383 12 mm dia 50 mm long wedge type expanded zinc alloy dash fastener each 7.00
7385 3 mm thick translucent white acrylic plastic sheet sqm 490.00
7386 12 mm thick particle board ceiling tile sqm 95.00
7387 Spigot for standard jointing kg 40.00
7388 Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt each 10.00
7389 Anodising 15 microns on aluminium sections kg 38.00
7390 EPDM Gasket for uPVC window/door metre 15.00
7391 Anodising 25 microns on aluminium sections kg 48.00
7392 Powder coating 50 microns on aluminium sections kg 61.00
7393 Polyester powder coating 50 microns on aluminium sections kg 67.00
7394 Double action hydraulic floor spring with stainless steel cover plate each 1500.00
7395 6 mm dia G.I. adjustable hangers including clips (up to 1.2 m length) each 20.00
7396 Double action hydraulic floor spring with brass cover plate each 1620.00
7397 Base Jack each 145.00
7398 Challies each 765.00
7399 Cup locks each 48.00
7400 15 mm PTMT bib cock each 65.00
7401 15 mm PTMT bib cock with flange (fancy) each 90.00
7402 15 mm PTMT bib cock long body with flange each 100.00
7403 15 mm dia PTMT stop cock (male thread) each 60.00
7405 20 mm dia PTMT stop cock each 68.00
7406 PTMT pillar cock each 115.00
7407 PTMT push cock 15 mm dia each 55.00
7408 PTMT push cock 12 mm dia 20 mm BSP each 45.00
7409 PTMT grating 100 mm dia each 16.00
7410 PTMT Pillar cock (fancy) 15 mm foam flow each 125.00
7411 125 mm grating with waste hole each 25.00
7412 Rectangular type with openable circular lid 150 mm size 18 mm high with 100 mm dia
(110 gm) each 118.00

7415 Double acting air valve 50 mm each 3715.00

7416 Double acting air valve 80 mm each 4525.00

7417 Double acting air valve 100 mm each 5910.00

7418 Water meter (including testing charges) 80 mm each 2030.00
7419 Water meter (including testing charges) 100 mm each 3143.00
7420 Water meter (including testing charges) 150 mm each 4765.00
7421 Water meter (including testing charges) 200 mm each 5145.00
7422 Dirt box strainer 80 mm each 2680.00
7423 Dirt box strainer 100 mm each 4370.00
7424 Dirt box strainer 150 mm each 5540.00
7425 Dirt box strainer 200 mm each 7860.00
7426 Cat's eye each 80.00
7427 Water stops Serrated with central bulb (225 mm wide, 8-11 mm thick) metre 200.00
7428 Water stops Dumb bell with central bulb metre 160.00
7429 Kickers metre 160.00
7430 Wedge expansion hold fastener 1/4" or 6 mm each 8.00
7431 Wedge expansion hold fastener 3/8" or 10 mm each 10.00
7432 Wedge expansion hold fastener 1/2" or 12 mm each 24.00
7439 8mm thick (mirror polished tiles machine cut edge) Raj Nagar white sqm 450.00
7442 Wheel 75 mm dia. 40 mm wide each 62.00
7443 Aluminium single cleat of size 30x32x3 mm each 14.00
7444 Aluminium grip strip of size 50x12x2 mm each 11.00
7445 25 mm thick prelaminated flush door shutter both side decorative sqm 800.00
7449 Aluminium U beading kg 210.00
7451 Glass sheet (Pin headed) 4 mm thick sqm 345.00
7452 Raj nagar plain white marble (table rubbed and polished) 18 mm thick (slab area upto
0.50 sqm) sqm 538.00

7453 Raj nagar plain white marble (table rubbed and polished) 18 mm thick (slab area more
than 0.50 sqm) sqm 650.00

7466 Second class deodar teak wood lipping 30 mm wide x 12 mm thick metre 20.00
7468 Veneered particle board with commercial veneering on both sides 12 mm thick
sqm 480.00

7477 Prelaminated particle board with one side decorative and other side balancing
lamination, flat pressed 3 layer & graded (medium density) Grade i, Type II conforming
to IS : 12823 (exterior grade) 12 mm thick
sqm 500.00
7478 Prelaminated particle board with one side decorative and other side balancing
lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming
to IS : 12823 (exterior grade) 18 mm thick
sqm 560.00
7479 Prelaminated particle board with one side decorative and other side balancing
lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming
to IS : 12823 (exterior grade) 25 mm thick
sqm 850.00
7480 Prelaminated particle board with both sides decorative lamination, flat pressed 3
layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior
grade) 12 mm thick
sqm 490.00
7485 Oxidised M. S. hinges finished with nickel plating 50 mm (Over all width) metre 40.00
7486 Oxidised M. S. hinges finished with nickel plating 65 mm (Over all width) metre 52.00
7491 PTMT - Waste Coupling 31/32 mm each 34.00
7492 PTMT - Waste Coupling 38/40 mm each 39.00
7493 PTMT - Bottle Trap 31/32 mm each 200.00
7494 PTMT - Bottle Trap 38/40 mm each 200.00
7495 PTMT Ball Cock 15mm complete with Epoxy Coated Aluminium Rod &
H.D. Ball each 75.00
7496 PTMT Ball Cock 20mm complete with Epoxy Coated Aluminium Rod &
H.D. Ball each 110.00

7497 PTMT Ball Cock 25mm complete with Epoxy Coated Aluminium Rod &
H.D. Ball each 275.00

7498 PTMT Ball Cock 40mm complete with Epoxy Coated Aluminium Rod &
H.D. Ball each 420.00

7499 PTMT Ball Cock 50mm complete with Epoxy Coated Aluminium Rod &
H.D. Ball each 820.00

7500 PTMT Angle Stop cock with Flange 15 mm each 85.00

7501 PTMT Swiveling shower 15 mm each 65.00
7503 PTMT Liquid Soap Container of 400 ml capacity each 95.00
7504 PTMT - Towel Ring 215x200x37 mm each 110.00
7505 PTMT - Towel Rail (450 mm long ) each 125.00
7506 PTMT - Towel Rail (600 mm long) each 145.00
7507 PTMT Shelf 450x124x36 mm each 150.00
7508 PTMT - Urinal Spreader 15 mm each 55.00
7509 PTMT Soap Dish/Holder 138x102x75 mm each 58.00
7512 PTMT handle 125x34x24 mm each 20.00
7513 PTMT handle 150x34x24 mm each 20.00
7514 PTMT butt hinges 75x60x10 mm each 29.00
7515 PTMT butt hinges 100x75x10 mm each 36.00
7516 PTMT Tower bolt 152x42x18 mm each 35.00
7517 PTMT Tower bolt 202x42x18 mm each 58.00
7518 PTMT door catcher 72x42 mm each 22.00
7552 Coir veneered board 4 mm thick sqm 260.00
7553 Coir veneered board 6 mm thick sqm 350.00
7555 Coir veneered board 12 mm thick sqm 625.00
7556 Coir veneered board 18 mm thick sqm 930.00
7621 Hubless centrifugally cast (spun) iron pipes as per IS 15905 - 100 mm dia (3000 mm
length pipe) metre 700.00

7622 Hubless centrifugally cast (spun) iron pipes as per IS 15905 - 75 mm dia (3000 mm
length pipe) metre 570.00

7623 Hubless centrifugally cast (spun) iron plain bend as per IS 15905 - 100mm dia
each 230.00

7624 Hubless centrifugally cast (spun) iron plain bend as per IS 15905 - 75 mm dia
each 160.00

7625 Hubless centrifugally cast (spun) iron double equal plain junction as per IS 15905 -
100x100x100x100 mm dia each 510.00

7626 Hubless centrifugally cast (spun) iron double equal plain junction as per IS 15905 -
75x75x75x75 mm dia each 275.00

7627 Hubless centrifugally cast (spun) iron single equal plain junction as per IS 15905 -
100x100x100 mm dia each 400.00

7628 Hubless centrifugally cast (spun) iron single equal plain junction as per IS 15905 -
75x75x75 mm dia each 215.00

7629 Hubless centrifugally cast (spun) iron double unequal plain junction as per IS
15905 - 100x100x75x75 mm dia each 400.00

7630 Hubless centrifugally cast (spun) iron single unequal plain junction as per IS
15905 -100x100x75 mm dia each 375.00

7631 Hubless centrifugally cast (spun) iron double equal plain invert branch as per IS 15905
- 100x100x100x100 mm dia each 625.00

7632 Hubless centrifugally cast (spun) iron single equal plain invert branch as per IS 15905 -
100x100x100 mm dia each 390.00
7633 Hubless centrifugally cast (spun) iron single equal plain invert branch as per IS 15905 -
75x75x75 mm dia each 260.00

7634 Hubless centrifugally cast (spun) iron single unequal plain invert branch 45 degree
as per IS 15905 - 100x100x75 mm dia each 430.00

7635 Hubless centrifugally cast (spun) iron 65 mm offset with 100 mm dia pipe as per IS
15905 each 360.00

7636 Hubless centrifugally cast (spun) iron 65 mm offset with 75 mm dia pipe as per IS
15905 each 295.00

7637 Hubless centrifugally cast (spun) iron 130 mm offset with 100 mm dia pipe as per IS
15905 each 440.00

7638 Hubless centrifugally cast (spun) iron 130 mm offset with 75 mm dia pipe as per IS
15905 each 310.00

7639 Hubless centrifugally cast (spun) iron bend with access door - 100mm dia as per IS
15905 each 365.00

7640 Hubless centrifugally cast (spun) iron bend with access door - 75mm dia as per IS
15905 each 290.00

7641 Hubless centrifugally cast (spun) iron terminal guard (slotted cowl) - 100 mm dia as per
IS 15905 each 270.00

7642 Hubless centrifugally cast (spun) iron trap with 100 mm inlet and 100 mm outlet as per
IS 15905 each 540.00

7643 Hubless centrifugally cast (spun) iron trap with 100 mm inlet and 75 mm outlet as per
IS 15905 each 385.00

7644 SS 304 grade shielded coupling with EPDM rubber gasket for 100mm dia Hubless
centrifugally cast (spun) iron each 275.00

7645 SS 304 grade shielded coupling with EPDM rubber gasket for 75 mm dia Hubless
centrifugally cast (spun) iron each 250.00

7651 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 100 mm dia metre 765.00
7652 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 150 mm dia metre 1150.00
7653 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 200 mm dia metre 1575.00
7654 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 250 mm dia metre 2200.00
7655 Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 300 mm dia metre 2750.00
7656 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 350 mm dia metre 3350.00
7657 Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 400 mm dia metre 4300.00
7658 Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 450 mm dia metre 5000.00
7659 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 500 mm dia metre 6270.00
7660 Ductile Iron class K -9 pipe Conforming to I.S. 8329 - 600 mm dia metre 7560.00
7661 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 700 mm dia metre 10500.00
7662 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 750 mm dia metre 11350.00
7663 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 800 mm dia metre 11450.00
7664 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 900 mm dia metre 13900.00
7665 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 1000 mm dia metre 15550.00

7666 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 100 mm dia each 29.00
7668 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 150 mm dia each 33.00
7669 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 200 mm dia each 60.00
7670 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 250 mm dia each 70.00
7671 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 300 mm dia each 100.00
7672 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 350 mm dia each 116.00
7673 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 400 mm dia each 210.00
7674 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 450 mm dia each 250.00
7675 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 500 mm dia each 270.00
7676 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 600 mm dia each 356.00
7677 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 700 mm dia each 510.00
7678 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 750 mm dia each 600.00
7679 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 800 mm dia each 705.00
7680 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 900 mm dia each 910.00
7681 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 1000 mm dia each 1080.00
7682 Ductile Iron K - 12 specials suitable for push on jointing up to 600 mm dia quintal 12400.00
7683 Ductile Iron K - 12 specials suitable for push on jointing over 600 mm dia quintal 17200.00
7684 Ductile Iron specials suitable for mechanical jointing as per I.S. 9523 - up to 600 mm
dia quintal 13050.00

7685 Ductile Iron Specials suitable for mechanical jointing as per I.S. 9523 over 600 mm dia
quintal 18750.00

7686 Ductile Iron Pipe Class K-9 flanges and welding 100 mm dia metre 1100.00
7687 Ductile Iron Pipe Class K-9 flanges and welding 150 mm dia metre 1650.00
7688 Ductile Iron Pipe Class K-9 flanges and welding 200 mm dia metre 2075.00
7689 Ductile Iron Pipe Class K-9 flanges and welding 250 mm dia metre 2950.00
7690 Ductile Iron Pipe Class K-9 flanges and welding 300 mm dia metre 3790.00
7691 Ductile Iron Pipe Class K-9 flanges and welding 350 mm dia metre 4780.00
7692 Ductile Iron Pipe Class K-9 flanges and welding 400 mm dia metre 6150.00
7693 Ductile Iron Pipe Class K-9 flanges and welding 450 mm dia metre 6453.00
7694 Ductile Iron Pipe Class K-9 flanges and welding 500 mm dia metre 9180.00
7695 Ductile Iron Pipe Class K-9 flanges and welding 600 mm dia metre 12150.00
7696 Ductile Iron Pipe Class K-9 flanges and welding 700 mm dia metre 14370.00
7697 S&S Centrifugally (Spun) C.I. Pipe class LA 100 mm dia metre 857.00
7698 S&S Centrifugally (Spun) C.I. Pipe class LA 125 mm dia metre 1067.00
7699 S&S Centrifugally (Spun) C.I. Pipe class LA 150 mm dia metre 1286.00
7700 S&S Centrifugally (Spun) C.I. Pipe class LA 200 mm dia metre 2190.00
7701 S&S Centrifugally (Spun) C.I. Pipe class LA 250 mm dia metre 2857.00
7702 S&S Centrifugally (Spun) C.I. Pipe class LA 300 mm dia metre 3857.00
7703 S&S Centrifugally (Spun) C.I. Pipe class LA 350 mm dia metre 4619.00
7704 S&S Centrifugally (Spun) C.I. Pipe class LA 400 mm dia metre 6095.00
7705 S&S Centrifugally (Spun) C.I. Pipe class LA 450 mm dia metre 7381.00
7706 S&S Centrifugally (Spun) C.I. Pipe class LA 500 mm dia metre 8571.00
7707 S&S Centrifugally (Spun) C.I. Pipe class LA 600 mm dia metre 11995.00
7708 S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead jointing up
to 300 mm dia quintal 5190.00

7709 S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead jointing
over 300 mm dia quintal 6200.00

7710 S&S Centrifugally (Spun) C.I. Pipe specials suitable for mechanical joint as per I.S.
13382 up to 300 mm dia quintal 8571.00

7711 S&S Centrifugally (Spun) C.I. Pipe Specials suitable for mechanical joint as per I.S.
13382 over 300 mm dia quintal 9048.00

7712 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S.
1536, - 100 mm dia metre 1310.00

7713 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S.
1536, - 150 mm dia metre 2048.00

7714 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S.
1536, - 200 mm dia metre 3238.00

7715 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S.
1536, - 250 mm dia metre 3905.00

7716 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S.
1536, - 300 mm dia metre 4990.00

7717 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S.
1536, - 350 mm dia metre 6286.00
7718 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S.
1536, - 400 mm dia metre 8143.00

7719 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S.
1536, - 450 mm dia metre 10381.00

7720 Screwed double flanged centrifugally cast (spun) C./. Pipe of Class B conforming to I.S.
1536, - 500 mm dia metre 12914.00

7721 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S.
1536, - 600 mm dia metre 17905.00

7722 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 100 mm dia metre 800.00
7723 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 150 mm dia metre 1140.00
7724 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 200 mm dia metre 1400.00
7725 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 250 mm dia metre 1800.00
7726 Ductile Iron Class K- 7 pipe conforming to i.S. 8329 - 300 mm dia metre 2250.00
7727 Ductile Iron Class K- 7 pipe conforming to i.S. 8329 - 350 mm dia metre 2650.00
7728 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 400 mm dia metre 3175.00
7729 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 450 mm dia metre 3852.00
7730 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 500 mm dia metre 4350.00
7731 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 600 mm dia metre 5600.00
7732 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 700 mm dia metre 7300.00
7733 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 800 mm dia metre 9100.00
7734 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 900 mm dia metre 11800.00
7735 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 1000 mm dia metre 12300.00
7736 Extruded burnt flyash clay sewer bricks conforming to I.S 4885 1000 Nos 5000.00
7737 Fly ash bricks conforming to I.S. 12894 1000 Nos 3950.00
7738 Calcium Silicate Bricks machine moulded conforming to I.S. 4139 1000 Nos 5050.00
7739 Modified Bitumen Refinery produced CRMB - 55 tonne 28000.00
7741 Modified Bitumen Refinery produced CRMB - 60 tonne 29150.00
7742 Bitumen emulsion medium setting (M.S.) conforming to IS : 8887 tonne 27100.00
7743 M.S. pipe 150 mm dia casing pipe metre 1126.00
7744 M.S. pipe 200 mm dia casing pipe metre 1400.00
7745 PVC blind pipe 150 mm dia as per IS: 12818 metre 490.00
7746 PVC blind pipe 200 mm dia as per IS: 12818 metre 700.00
7747 M.S. cap 150 mm dia each 150.00
7748 M.S. cap 200 mm dia each 200.00
7749 M.S bail plug 150 mm dia each 200.00
7750 M.S bail plug 200 mm dia each 220.00
7751 PVC slotted pipe 150 mm dia as per IS: 12818 metre 500.00
7752 PVC slotted pipe 200 mm dia as per IS: 12818 metre 810.00
7753 Stone Boulder 50 mm to 200 mm cum 810.00
7754 Gravel 5 mm to 10 mm cum 815.00
7755 Gravel 1.5 mm to 2 mm cum 815.00
7756 Gravel 3 mm to 6 mm cum 815.00
7757 M.S. pipe 100 mm dia casing pipe metre 780.00
7758 uPVC blind pipe 100 mm dia as per IS: 12818 metre 405.00
7759 uPVC slotted pipe 100 mm dia as per IS: 12818 metre 425.00
7760 M.S. cap 100 mm dia each 135.00
7761 M.S. bail plug 100 mm dia each 160.00
7762 Precast R.C.C. perforated slab each 875.00
7763 Water supply tanker of 5000 litre capacity each 1500.00
7764 M.S. socket 100 mm dia each 125.00
7765 M.S. socket 150 mm dia each 205.00
7766 M.S. socket 200 mm dia each 265.00
7767 Stone cleaning chemical approved by ASI litre 270.00
7768 Water repallent chemical approved by ASI litre 1100.00
7769 Stone surface strengthening chemical approved by ASI litre 835.00
7770 Turpentine oil litre 50.00
7771 Liquid Ammonia 5% litre 145.00
7772 Pea Gravel cum 910.00
7773 Coloured inter locking C.C. paver Block (60 mm thick, M-35) sqm 425.00
7774 Stone size 10x10x7.50cm each 9.00
7775 Sodium pentachlorophenate kg 500.00
7776 Concrete paver block of grade M-30 made of C&D waste (60mm thickness)
sqm 295.00

7800 Ceramic Glazed Tiles 1st quality minimum thickness 5mm in all colours shades
and designs except burgundy, bottle green, black sqm 190.00

7801 Ceramic Glazed Tiles 1st quality 300 x 300 mm in all shades and designs of White,
Ivory, grey, Fume Red brown etc. sqm 175.00

7802 Ceramic Glazed Tiles 1st quality 300 x 300 in all shades designs except White, Ivory,
Grey, Fume Red Brown etc. sqm 300.00

7803 Rectified Ceramic Glazed Tiles 1st quality 300 x 300 mm or more in all shades designs
White, Ivory, Grey, Fume Red Brown etc. sqm 340.00

7804 Rectified Ceramic Glazed Tiles 1st quality 300 x 300 mm or more in all shades designs
except White, Ivory, Grey, Fume Red Brown etc. sqm 400.00

7805 Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan 724mm X 578 mm
each 4500.00

7806 Salem Stainless steel AISI - 304 (18/8) Round basin 405mm X 355 mm each 1500.00
7807 Salem Stainless steel AISI - 304 (18/8) Wash basin 530mm X 345 mm each 2000.00
7808 Centrifugally cast (spun) iron S&S 100 mm inlet and 100 mm outlet each 450.00

7809 Centrifugally cast (spun) iron S&S 100 mm inlet and 75 mm outlet each 500.00
7850 Agaria White marble slab plain 18 mm thick sqm 950.00
7857 P.T.M.T. Grating square slit 150 mm each 45.00
7858 P.T.M.T. Urinal cock 15 mm dia each 95.00
7859 P.T.M.T. Bib cock with nozzle 15 mm each 110.00
7861 P.T.M.T. Stop cock (concealed) 15 mm each 120.00
7862 15 mm nominal bore and 30 cm length PVC connection pipe with
P.T.M.T. Nuts each 38.00

7863 15 mm nominal bore and 45 cm length PVC connection pipe with

P.T.M.T. Nuts each 52.00

7864 P.T.M.T. extension nipple 15 mm dia each 25.00

7865 P.T.M.T. extension nipple 20 mm dia each 50.00
7866 P.T.M.T. extension nipple 25 mm dia each 68.00
7893 Tactile tile sqm 800.00
7895 Matt finished vitrified tile 100x100 x16 mm sqm 910.00
7896 Vitrified tile sqm 450.00
7900 Modular common burnt clay bricks of class designation 7.5 1000 Nos 3800.00
7901 Machine moulded perforated common burnt clay FPS (non modular) bricks of class
designation 12.5 1000 Nos 4200.00

7902 Machine moulded common burnt clay modular perforated bricks of class designation
12.5 1000 Nos 4800.00

7903 Machine moulded common burnt clay FPS (non modular) bricks of class designation
12.5 1000 Nos 4700.00

7904 Machine moulded common burnt clay tile bricks of class designation 12.5 1000 Nos 4600.00
7911 Chemical Rust Remover litre 245.00
7912 Hire charges of Drill machine upto 30 mm dia day 160.00
7913 Epoxy kg 585.00
7914 SBR Polymer kg 175.00
7915 Woven PVC cloth sqm 25.00
7916 Hire charges of sand blasting equipment day 450.00
7917 Hire charges of compressure day 650.00
7918 25mm thick cement concrete shotcrete(guniting) with compressor sqm 110.00
7919 50mm thick cement concrete shotcrete(guniting) with compressor sqm 175.00
7920 75mm thick cement concrete shotcrete(guniting) with compressor sqm 280.00
7921 Adhesive chemical ml 2.00
7922 Bit of drilling machine for Hole upto 30mm dia each 500.00
7923 GI injection nipple 12mm dia, 75mm long each 45.00
7924 Blowing compressed air for cleaning holes upto 30mm dia each 10.00
7925 L shaped 100mm long, 10mm dia mild steel shear key kg 80.00
7926 Welding charges of shear key to existing reinforcement each 2.00
7927 Acrylic Polymer chemical for cracks kg 31.00
7928 Hire charges of Plant and machinery, it can inject - 350kg/day day 100.00
7929 Shear loops (6mm dia GI wire rope) (For vertical joints) 6 nos on each side
each 210.00

7930 dowel tubes (Corrugated GI pipes 50 to 80mm dia) (For horizontal joints)
metre 144.00

7931 Hooks for lifting (Alloy steel) having 2.5 tonne capacity each 270.00

7996 Factory made EPS light weight composite sandwitched wall/roof panel (50mm
thick) having core material of EPS granule balls/beads (conforming to IS 4671:1984
and shall have density not less than 15kg per cum). The outer face on both sides of
the panels will be non asbestos fiber cement board confirming to IS 14862:2000 or
Calcium silicate board confirming to EN 14306:2009 of 5mm thick each.

sqm 735.25
7997 Factory made EPS light weight composite sandwitched wall/roof panel (60mm
thick) having core material of EPS granule balls/beads (conforming to IS 4671:1984
and shall have density not less than 15kg per cum). The outer face on both sides of
the panels will be non asbestos fiber cement board confirming to IS 14862:2000 or
Calcium silicate board confirming to EN 14306:2009 of 5mm thick each

sqm 845.00
7998 Factory made EPS light weight composite sandwitched wall/roof panel (75mm
thick) having core material of EPS granule balls/beads (conforming to IS 4671:1984
and shall have density not less than 15kg per cum). The outer face on both sides of
the panels will be non asbestos fiber cement board confirming to IS 14862:2000 or
Calcium silicate board confirming to EN 14306:2009 of 5mm thick each

sqm 1074.46
7999 Factory made EPS light weight composite sandwitched wall/roof panel (90mm
thick) having core material of EPS granule balls/beads (conforming to IS 4671:1984
and shall have density not less than 15kg per cum). The outer face on both sides of
the panels will be non asbestos fiber cement board confirming to IS 14862:2000 or
Calcium silicate board confirming to EN 14306:2009 of 5mm thick each

sqm 1268.00
8000 Factory made EPS light weight composite sandwitched wall/roof panel (100mm
thick) having core material of EPS granule balls/beads (conforming to IS 4671:1984
and shall have density not less than 15kg per cum). The outer face on both sides of
the panels will be non asbestos fiber cement board confirming to IS 14862:2000 or
Calcium silicate board confirming to EN 14306:2009 of 5mm thick each

sqm 1512.37
8001 24 mm thick Factory made shutters with style, rails and panels of PVC extruded
sections in white, grey or wooden finish sqm 1085.93

8002 30 mm thick Factory made shutters with style, rails and panels of PVC extruded
sections in white, grey or wooden finish sqm 1248.82

8003 Factory made PVC rigid foam panelled shutter i/c carriage sqm 1547.45
8004 Factory made PVC rigid foam panelled shutter as per IS : 4020 i/c carriage
sqm 1547.45

8006 Factory made PVC rigid foam sheet 1 mm thick sqm 155.80
8007 Factory made PVC rigid foam sheet 5 mm thick sqm 632.00
8008 Factory made prelaminated PVC rigid foam sheet 5 mm thick sqm 752.00
8010 48mmX40mmX1.5mm thick Factory made door frame of PVC extruded sections in
white, grey or wooden finish metre 130.00

8011 Factory made door frame PVC extruded sheet i/c carriage metre 260.00
8012 Adhesive solvent cement kg 140.00
8013 Factory made EPS Core wallpanel /roof panel sandwiched between two Engineered
welded wire fabric mesh of 3 mm dia G.I. wire mesh,with 50 mm pitch in both the
directions, kept at 120-135 mm gap and interconnected by the zig zag G.I. wire of 3
mm dia at alternate row by welding.

sqm 1650.00
8014 Factory made door frame of size 50x47 mm with wall thickness 5 mm made of single
piece extruded profile metre 298.74

8015 Expanded poly ethylene Foam sheet 4mm thick of Density 40kg/m3 sqm 20.00
8016 High Density expanded poly ethylene (EPE) Foam 1mm thick sqm 10.00
8017 Fire rated door frame made with 1.6 mm thick G.I sheet (120 minutes fire rating)
metre 1200.00

8018 Fire rated door shutter made with 1.6 mm thick G.I sheet (120 minutes fire rating)
including hinges ( without glass panels) sqm 6000.00

8019 GI sheet 0.8 mm thick confirming to IS 277:1992 kg 90.00

8020 Factory made EPS Core wall panel /roof panel sandwiched between two Engineered
welded wire fabric mesh of 3 mm dia G.I. wire mesh, with 50 mm pitch in both the
directions, connected by G.I. wire of 3mm dia at alternate row by welding

sqm 600.00
8021 Bamboo wood Tile Flooring 14mm thick, minimum 1800 mm length and minimum
100 mm wide sqm 3470.00

8022 Bamboo wood Quarter Round 18mm thick of size 1900mm x 18mm metre 115.00
8023 Bamboo wood door reducer 14mm thick of size 1900mm x 44mm metre 255.00
8024 Bamboo wood Skirting 14mm thick of Size 1900mm x 85mm metre 300.00
8025 Bamboo wood Tile Wall Cladding 10mm thick, minimum 1800 mm length and
minimum 100 mm wide sqm 3400.00

8026 Bamboo wood T-mold 14mm thick of size 1900mm x 44mm metre 250.00
8027 Bamboo wood Threshold 14mm thick of size 1900mm x 44mm metre 255.00
8028 Bamboo wood shutter of doors 10 cudm 1700.00
8029 Bamboo wood panelling (10mm thick) 10 cudm 1680.00
8030 Superior class Bamboo wood door frame 65 mm thick, 10 cudm 1675.00
8031 Aluminium sheets Grade 5052, 4 mm thick for wall panel/deck panel/ WRB
panel/Kicker Panels/door closing panels ( for form work) sqm 8500.00

8032 Aluminium sheets Grade 5052, 4 mm thick for Internal Corner/Column Corners/ ( for
form work) sqm 11500.00

8033 Aluminium sheets Grade 5052, 4 mm thick for Mid Soldier/End soldier (for form
work) sqm 32000.00

Accessories for aluminium form work

8034 External corner 2050 mm each 1400.00
8035 External corner 825 mm each 590.00
8036 soldier tie 370mm each 290.00
8037 Adjustable prop-2.0 x2.0 m each 1200.00
8038 Pin-50 each 15.00
8039 Pin-127 each 55.00
8040 wedge each 14.00
8041 wall tie-150 (355 mm ) each 45.00
8042 Polythene Sleeve 90 x 150mm each 3.00
8043 Polythene Roll - 150mm Long. each 6.00
8044 Vertical Soldier -1100mm each 370.00
8045 Wall Attached Bracket 600x1000mm each 990.00
8046 Allignment Pipe - 3.00 Mtr. each 1000.00
8047 Allignment Bracket each 480.00
8048 Tie Rod for Bracket - 500mm each 120.00
8049 Anchor Wing Nut Ø100 mm each 65.00
8050 Debit Pin - 250mm each 60.00
8051 PVC Pipe Ø20mm - 150mm long each 5.00
8052 PVC Cone each 5.00
8053 Bolt+Nut - 16 x 80 mm each 30.00
8054 Flat Washer Ø16, 3mm thik each 5.00
8055 Bolt+Nut - 16 x 30 mm each 18.00
8056 Door spacer 45x45x5-1135mm Long each 365.00
8057 Door spacer 45x45x5-1135mm Long each 320.00
8100 Powder coated M.S. butt hinges 100 mm X58 mmX1.9 mm 10 Nos 130.00
8101 SS ball bearing of size 100 x89x3mm each 450.00
8116 Zinc alloy (white powder coated) 3D Hinges for uPVC door each 455.00
8117 Zinc alloy (white powder coated) handles with zinc plated mild steel multi point locking
having transmission gear, cylinder with keeps and one side key for uPVC casement
door
each set 2635.00
8118 Zinc alloy (white powder coated) handles along with zinc plated mild steel multi point
locking having transmission gear with keeps for uPVC sliding window
each set 1535.00
8119 Zinc alloy (white powder coated) handles with key along with zinc plated mild
steel multi point locking having transmission gear with keeps for uPVC sliding door

each set 1265.00

8121 uPVC extruded (small series) casement window frame size 47x50mm metre 280.00
8122 uPVC extruded (small series) casement window sash/window mullion size 47x68
mm metre 311.00

8125 uPVC extruded glazing bead of appropriate dimension for small series casement
window Sash metre 100.00

8126 uPVC extruded (big series) casement window frame size 67x60 mm metre 351.00
8127 uPVC extruded (big series) casement door frame size 67x64 mm metre 396.00
8128 uPVC extruded (big series) casement window sash/window mullion/ door mullion
size 67x80 mm metre 469.00

8129 uPVC extruded (big series) casement door sash size 67x110 mm metre 568.00
8130 uPVC extruded glazing bead of appropriate dimension for big series casement
window/door sash metre 135.00

8131 uPVC extruded glazing bead of appropriate dimension for small series sliding window
sash metre 66.00

8132 uPVC extruded glazing bead of appropriate dimension for big series of sliding window/
door sash metre 85.00
8133 uPVC extruded (small series) 2 track sliding window frame size 52x44 mm
metre 314.00

8134 uPVC extruded (big series) 2 track sliding window/door frame size 67x50mm
metre 424.00

8135 uPVC extruded (small series) 3 track sliding window frame size 92x44 mm
metre 418.00

8136 uPVC extruded (big series) 3 track sliding window/door frame size 116x45mm
metre 583.00

8137 uPVC extruded (small series) 2 track sliding window sash/3 track sliding window sash
size 32x60mm metre 291.00

8138 uPVC extruded (big series) 2 track sliding window sash size 46x62mm metre 357.00
8139 uPVC extruded (big series) 3 track sliding window sash size 46x62mm metre 358.00

8140 uPVC extruded interlock of appropriate dimension for small series sliding window
sash metre 88.00

8141 uPVC extruded interlock of appropriate dimension for big series sliding window/
door sash metre 98.00

8142 uPVC extruded inline adaptor of appropriate dimension for big series sliding
window/door sash metre 98.00

8143 uPVC extruded 2 track sliding door sash/ 3 track sliding door sash (big series) size
46x82mm metre 385.00

8144 Bamboo Mat corrugated sheets 3.5 to 4mm thick conforming to IS 15476:2004
sqm 2648.00

8145 Bamboo Mat Ridge cap 3.5 to 4mm thick conforming to IS 15476:2004 metre 2570.00
8146 3mm thick Bamboo Mat Board conforming to IS 13958:1994 sqm 1508.00
8147 4mm thick Bamboo Mat Board conforming to IS 13958:1994 sqm 1738.00
8148 6mm thick Bamboo Mat Board conforming to IS 13958:1994 sqm 2098.00
8149 9mm thick Bamboo Mat Board conforming to IS 13958:1994 sqm 2688.00
8150 12mm thick Bamboo Mat Board conforming to IS 13958:1994 sqm 3115.00
8200 A.P.P. modified polymeric felt (two layers) 1.5 mm thick sqm 80.00
8201 A.P.P. modified polymeric felt (two layers) 2 mm thick sqm 120.00
8203 A.P.P. modified 2 mm thick membrane reinforced with glass fibre matt sqm 130.00
8204 A.P.P. modified 3 mm thick membrane reinforced with glass fibre matt sqm 190.00
8205 A.P.P. modified 3 mm thick membrane reinforced with polyester matt sqm 210.00
8206 Bitumen primer for bitumen membrane litre 85.00
8207 Geotextile 120 grams per sqm membrane sqm 45.00
8210 Stainless steel screws 50 mm 100 Nos 300.00
8211 Stainless steel screws 40 mm 100 Nos 250.00
8212 Stainless steel screws 30 mm 100 Nos 230.00
8214 Stainless steel screws 20 mm 100 Nos 150.00
8215 Stainless steel butt hinges 125x64x1.9 mm IS : 12817 marked 10 Nos 310.00
8216 Stainless steel butt hinges 100x58x1.9 mm IS : 12817 marked 10 Nos 280.00
8217 Stainless steel butt hinges 75x47x1.8 mm IS : 12817 marked 10 Nos 180.00
8218 Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 Nos 150.00
8219 Stainless steel butt hinges (heavy weight) 125x64x2.5 mm IS : 12817 marked
10 Nos 375.00

8220 Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 12817 marked
10 Nos 275.00

8221 Stainless steel butt hinges (heavy weight) 75x50x2.5 mm IS : 12817 marked
10 Nos 230.00

8222 M.S. heavy weight butt hinges 125x90x4.0 mm IS: 1341 marked. 10 Nos 230.00
8223 M.S. heavy weight butt hinges 100x75x3.5 mm IS: 1341 marked 10 Nos 180.00
8224 M.S. heavy weight butt hinges 75x60x3.1 mm IS: 1341 marked 10 Nos 110.00
8225 M.S. heavy weight butt hinges 50x40x2.5 mm IS : 1341 marked 10 Nos 90.00
8226 Concealed zinc coated hinges 19-20 mm thick with mounting plate 10 Nos 460.00
8227 Stainless steel fancy handle 10 Nos 1000.00
8228 Soft closing stainless steel hinges 10 Sets 1550.00
8229 Stainless steel telescopic drawer channels 500mm long set 535.00
8230 Stainless steel (Grade-304) basket (readymade) kg 260.00
8300 1216 mm PE-AL-PE Composite pressure pipe metre 80.00

8301 1620 mm PE-AL-PE Composite pressure pipe metre 90.00

8302 2025 mm PE-AL-PE Composite pressure pipe metre 140.00
8303 2532 mm PE-AL-PE Composite pressure pipe metre 180.00
8304 3240 mm PE-AL-PE Composite pressure pipe metre 280.00
8305 4050 mm PE-AL-PE Composite pressure pipe metre 360.00
8306 PPR Union 20 mm each 60.00
8307 PPR Union 25 mm each 110.00
8308 PPR Union 32 mm each 150.00
8309 PPR Union 40 mm each 220.00
8310 PPR Union 50 mm each 410.00
8311 PPR Union 63 mm each 550.00
8312 PPR Union 75 mm each 1100.00
8500 Water for jetting / blowback 1000 litre 1500.00
8501 Polymer modified cementation coating kg 160.00
8502 Fibre glass cloth sqm 32.00
8504 Multi surface paint litre 300.00
8505 Acrylic exterior paint litre 200.00
8506 Premium Acrylic exterior paint litre 210.00
8507 Textured exterior paint litre 280.00
8508 Primer for cement paint litre 90.00
8509 Special Primer (C.W.) litre 160.00
8510 Metal Primer (U.G.) litre 105.00
8511 Fibre reinforced elastomeric liquid water proofing membrane litre 230.00
8512 Cementitious water proofing coating with elastic polymers kg 225.00
8513 Acrylic modified resin based texture kg 42.00
8514 40 mm long S.S screws with plastic rawl plugs 100 42.00
8515 Galavanised MS 8 mm outer diameter M-6 dash fastener 50mm long each 42.00
8516 ZMB 60/equivalent kg 110.00
8517 ZMB thinner litre 220.00
8518 Zycoprime / equivalent litre 230.00
8519 Zycosil / equivalent litre 1800.00
8520 Elastobar / equivalent kg 300.00
8552 Mineral fibre beveled tegular edged ceiling tiles 595 x595mm,16 mm thick sqm 835.00
8553 Mineral fibre beveled tegular edged ceiling tiles 595 x595mm,16 mm thick with bio-
block conforming to ISO 5 (class 100) specifications. sqm 925.00

8554 Mineral fiber beveled tegular edged ceiling tiles 595 x595mm,20 mm thick.
sqm 1045.00

8555 G.I main runner 15 x32 mm of 3000 mm length, 0.33 mm thick each 190.00
8556 G.I cross-T 15 x32 mm of 1200 mm length, 0.33 mm thick each 78.00
8557 G.I cross-T 15 x32 mm of 600 mm length, 0.33 mm thick each 35.00
8558 G.I hanger rod 6mm dia fully threaded upto 1000 mm length each 26.00
8559 Stainless steel U Channel of size (50x25x2mm) metre 160.00
8560 Non staining water resistant clear silicon metre 70.00
8561 Extruded polystyrene rigid insulation board 50 mm thick sqm 550.00
8562 Expanded Polystyrene insulation board 120 mm thick confirming to IS 4671-1984, Fire
retardant property self-extinguishing type as per
EN 13501-1 sqm 825.00
8563 15 mm thick, light weight, integral densified micro look edged, false ceiling tiles of size
595x595 mm. sqm 725.00

8564 15 mm thick, light weight,fully perforated square/butt edge integral densified, false
ceiling tiles of size 595x595 mm. sqm 900.00

8565 Galavanised MS hanger rod 6 mm dia MS fully threaded up to 1000mm length

each 27.00

8566 Powder coated steel section main-T ceiling sections 15x42x0.40 mm (3000 mm
long) each 260.00

8567 Galvanized mild steel perimeter wall angle 22x19x0.40 mm (3000mm long)
each 125.00

8568 Powder coated Galvanised Iron intermediate cross-T section 15x42x

0.40 mm (1200 mm long) each 105.00

8569 Powder coated Galvanized Iron intermediate cross-T section 15x42x 0.40mm (600 mm
long ) each 50.00

8570 GI Main T ceiling section 30x25x0.3 mm (3 metre long) each 210.00

8571 GI Perimeter wall angle 25x25x0.4 mm (3 metre long) each 170.00
8572 GI Intermediate cross T section 25x25x0.3 mm (1.2 metre long) each 80.00
8573 GI Intermediate cross T section 25x25x0.3 mm (0.6 metre long) each 35.00
8576 Powder coated Galvanized Iron intermediate cross-T section wire diameter 3.00 mm).
sqm 200.00

8577 Crates made of Mesh type 10x12 (D=100 mm) Zn+PVC coated. Mesh wire diameter
2.70/3.70 mm (ID/OD). sqm 250.00

8578 Crates made of Mesh type 10x12 (D=100 mm) Zn+10% Al alloy +PVC coated. Mesh
wire diameter 2.70/3.70 mm (ID/OD). sqm 290.00

8579 Cold form light gauge Steel C-section of thickness 0.75mm i/c zink coating/sliting etc.
kg 140.00

8580 Wastage of cold form light gauge steel kg 18.00

8581 12 mm thick micro tegular edged semi perforated GRG (Glass Fibre Reinforced
Gypsum) false celing tiles of Size 595x595 mm sqm 550.00

8582 12 mm thick micro tegular edged fully perforated GRG (Glass Fibre Reinforced
Gypsum) false celing tiles of Size 595x595 mm sqm 600.00

8583 10 mm thick square edge fully perforated GRG(Glass Fibre Reinforced Gypsum) false
celing tiles of Size 595x595 mm sqm 750.00

8587 Galvanized iron intermediate cross-T section 15x32x0.33 mm (600mm long)

each 37.00

8588 Galavanised MS hanger rod 6mm dia MS fully threaded up to 1000mm length
each 28.00

8589 Calcium Silicate tegular edged celling tiles 595x595 mm and 15 mm thick on edges
sqm 685.00

8590 Galvanised Steel main Tee ceiling section Size 24x38x0.33 mm (3 metre long)
each 140.00

8591 Galvanised Steel perimeter wall Angle Size 24 x 24 x 0.40 mm (3.00 metre long)
each 90.00

8592 Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33mm (1.2 metre long)
each 45.00

8593 Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33mm (0.6 metre long)
each 22.00

8594 Galvanised Steel soffit cleat size 25x35x1.60 mm each 4.50

8595 Wooden screws with plastic rawl plugs 35x8 mm each 1.00
8596 Galvanised MS 8mm outer diameter M-6 dash fastener 25mm long each 35.00
8597 GI Metal Tile Clip in Plain Beveled edge global white colour tiles of size 600x600 mm
and 0.5 mm thick sqm 710.00

8598 GI Metal Tile Clip in Perforated Beveled edge global white colour tiles of size 600x600
mm and 0.5 mm thick sqm 800.00

8599 GI Metal Tile Lay-in Plain Tegular edge global white color tiles of Size 595x595 mm
and 0.5 mm thick sqm 625.00

8600 GI Metal Tile Lay-in Perforated Tegular edge global white color tiles of Size 595x595
mm and 0.5 mm thick sqm 735.00

8601 PVC Laminated Gypsum Tiles (Square edge) of Size 595x595 mm and
12.5 mm thick sqm 880.00

8602 Gypsum Tiles Fully Perforated Square edge of Size 595x595 mm and
12.5 mm thick sqm 380.00

8604 Spring T-section 24x34x0.45 mm (3.00 meter long) metre 220.00

8605 C Wall angle section 20x30x20x0.50 mm (3.00 meter long) metre 110.00
8606 Main C Carrier Size 10x38x10x0.70 mm (3.00 meter long) metre 130.00
8607 Spring T-connector each 5.00
8608 C Carrier Connector each 12.00
8609 C Suspension Clip each 10.00
8610 Wire Coupling Clip each 10.00
8611 Main T ceiling sections 24x38x0.3 mm (3 metre long) each 130.00
8612 Perimeter wall angle 24 x 24 x 0.3 mm (3 metre long) each 80.00
8613 Intermediate cross T-Section 24x25x0.3 mm (1.2 m long) each 40.00
8614 Intermediate cross T-Section 24x25x0.3 mm (0.6 m long) each 20.00
8615 Hanger rod 4 mm thick each 10.00
8616 Adjustment clip 85x30x0.8 mm each 6.00
8617 Soffit cleat (Size 27x37x25x1.60 mm) each 5.00
8618 Dash fastener 6 mm dia 50 mm long each 10.00
8619 Galavanised MS L-shape level adjuster of size 85x25x2 mm each 15.00
8620 Vitrified floor tile 50x50 cm conforming to IS 15622:2006 group (B1a) sqm 500.00
8621 Vitrified floor tile 60x60 cm conforming to IS 15622:2006 group (B1a) sqm 560.00
8622 Vitrified floor tile 80x80 cm conforming to IS 15622:2006 group (B1a) sqm 900.00
8623 Vitrified floor tile 100x100 cm conforming to IS 15622:2006 group (B1a) sqm 1390.00
8624 "Border tiles 200x75mm size each 16.00
8626 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 (SDR 7.4) - 20 mm Outer
dia metre 48.46

8627 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 (SDR 7.4) - 25 mm Outer
dia metre 74.82

8628 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 (SDR 7.4) - 32 mm Outer
dia metre 107.47

8629 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 (SDR 7.4) - 40 mm Outer
dia metre 162.00

8630 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR 11) - 50 mm Outer
dia metre 255.00

8631 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR 11) - 63 mm Outer
dia metre 285.00

8632 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR 11) - 75 mm Outer
dia metre 425.00

8633 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR 11) - 90 mm Outer
dia metre 600.00
8634 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR 11) - 110 mm Outer
dia metre 890.00

8635 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR 11) - 160 mm Outer
dia metre 2575.00

8636 Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm nominal dia metre 49.00
8637 Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm nominal dia metre 80.00
8638 Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm nominal dia metre 127.97
8639 Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm nominal dia metre 165.00
8640 Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm nominal dia metre 230.00
8641 Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm nominal dia metre 375.25
8642 Chlorinated Polyvinyl - chloride (CPVC) pipe 65 mm nominal dia metre 793.30
8643 Chlorinated Polyvinyl - chloride (CPVC) pipe 80 mm nominal dia metre 1031.05
8644 Chlorinated Polyvinyl - chloride (CPVC) pipe 100 mm nominal dia metre 1466.75
8645 Chlorinated Polyvinyl - chloride (CPVC) pipe 150 mm nominal dia metre 3145.15
8646 Weather Silicon sealant cartridge 112.00
8647 Stainless steel screws 30 mm x4 mm 100 Nos 35.84
8648 Hermetically sealed double glazed unit made with 6 mm thick clear float glass both side
having 12 mm air gap sqm 2200.00

8649 Stainless steel (SS 304 grade) adjustable friction window stay 205 x 19 mm
each 197.80

8650 Stainless steel (SS 304 grade) adjustable friction window stay 255 x 19 mm
each 225.00

8651 Stainless steel (SS 304 grade) adjustable friction window stay 355 x 19 mm
each 195.00

8652 Stainless steel (SS 304 grade) adjustable friction window stay 510 x 19 mm
each 535.00

8653 Stainless steel (SS 304 grade) adjustable friction window stay 710 x 19 mm
each 925.00

8654 Masking tape metre 2.18

8655 Autoclaved aerated cement (AAC) blocks cum 2650.00
8656 Gypsum panel 666 X 500 X 100 mm size sqm 480.00
8657 Bonding plaster for Gypsum panel kg 25.50
8658 Precast C&D waste concrete block 1000 Nos 25150.00
8659 Water proof ply 12 mm thick sqm 525.00
8660 Aluminium casement window fastener (Anodised AC 15) each 48.00
8661 Aluminium casement window fastener (powder coated ) each 52.64
8662 Aluminium casement window fastener (polyester powder coated) each 51.52
8663 Aluminium round shape handle (anodised AC 15) outer dia 100 mm each 59.36
8664 Aluminium round shape handle (powder coated) outer dia 100 mm each 60.00
8665 Aluminium round shape handle (polyester powder coated) outer dia 100 mm
each 62.00

8666 Stainless steel screws 25 mm x4 mm 100 Nos 41.80

8667 UV stabilised 2 mm thick plain FRP sheet sqm 450.00

8668 UV stabilised 2 mm thick corrugated FRP sheet sqm 525.00

8669 Mangalore ridge tiles 20 mm thick each 8.00
8670 Mangalore tiles 20 mm thick each 8.00
8671 Precoated galvanised iron profile sheet 0.50 mm TCT sqm 375.00
8672 Precoated galvanised steel plain ridges 0.50 mm TCT and 500-600mm wide
metre 225.00

8673 Precoated galvanised steel flashings/aprons 0.50 mm TCT and upto 600mm wide
metre 235.20

8674 Precoated galvanised steel gutter 600mm overall girth metre 440.00
8675 Precoated galvanised steel north light curves metre 240.00
8676 Precoated galvanised steel barge board (upto 300mm ) metre 230.00
8677 Precoated galvanised steel crimp curve sqm 235.00
8678 1 mm thick 35 mm wide bright finished stainless steel piano hinges metre 47.04
8682 Epoxy Grout kg 380.00
8683 Red sand stone gang saw cut 30 mm thick sqm 476.00
8684 White sand stone gang saw cut 30 mm thick sqm 560.00
8685 Delineator each 336.00
8686 Precast C.C. Kerb stone M - 25 cum 5600.00
8687 Thermoplastic paint kg 66.00
8688 Glass beads kg 72.00
8689 Interlocking C.C. paver block ( 60 mm thick, M-30) sqm 440.00
8690 High intensity retro - reflective sheet as per IRC 67-2001 sqm 1443.00
8691 Punched tape concertina coil 600 mm dia 10 m openable length (Total length 90 m)
bundle 600.00

8692 RBT reinforced barbed wire metre 7.00

8693 Turn buckle and strengthening bolt each set 42.00
8694 Precast pavement slab 450 x 450 x 50 mm (M - 30) each 145.00
8695 Chain link fabric fencing mesh of size 50x50 mm made of G.I. wire of dia 4 mm
sqm 300.00

8696 Chain link fabric fencing mesh of size 50x50 mm made of G.I. wire of dia 4 mm, PVC
coated to outer dia 5 mm sqm 330.00

8697 Chain link fabric fencing mesh of size 25x25 mm made of G.I. wire of dia 3 mm
sqm 380.00

8698 Stainless steel cramps(weight 260 grams) with nuts, bolts and washer for dry
stone cladding each 115.00

8699 8 mm thick tapered edge calcium silicate board sqm 270.00

8700 10 mm thick calcium silicate board sqm 420.00
8701 SS pipe 304 grades with press fit technology as per JIS 3448 standard 48.60 mm outer
dia metre 620.00

8702 Coupling/Socket fittings for 15.88 mm outer dia SS pipe each 60.00
8703 Telescopic drawer channels 300 mm long set 240.00
8704 Stainless steel roller for sliding arrangement in racks/ cupboards/ cabinets shutter
each 11.00

8705 50 mmX42 mmX2 mm thick Factory made door frame of PVC extruded sections in
white, grey or wooden finish metre 166.00

8706 25 mm thick factory made PVC flush door shutter i/c carriage sqm 1700.00
8707 Factory made glass reinforced plastic door frame 90x45 mm i/c carriage
metre 480.00

8708 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage
sqm 2326.00

8709 30 mm thick factory made solid PVC profile panelled door single piece extruded profile
decorative finish (wood grain printed on both side) sqm 2100.00

8710 Factory made solid PVC door frame 60 x 30 mm i/c carriage metre 315.00
8711 20 mm factory made solid PVC panel door shutter i/c carriage sqm 2050.00
8712 30 mm thick factory made solid PVC profile panelled door single piece extruded profile
non decorative finish sqm 2000.00

8713 Fiber glass reinforced plastic chajja sqm 3000.00

8714 Magnetic catcher triple strip vertical type each 28.00
8715 Magnetic catcher double strip horizontal type each 20.00
8716 100 mm mortice lock with 6 levers for aluminium door each 432.00
8719 2nd class teak wood moulded beading or Taj beading/ornamental bleading of size
18X5 mm metre 30.00

8720 Ceiling sections 0.55 mm thick having a knurled web of 51.55 mm and two flanges of
26 mm each with lips of 10.55 mm metre 38.00

8721 Perimeter channel having one flange of 20 mm and another flange of 30 mm with
thickness of 0.55 mm and web of length 27 mm metre 23.00

8722 Nylon sleeves & wooden screws (40 mm) each 2.60
8723 Counter sunk ribbed head screw 25 mm 100 Nos 76.00
8724 12 mm thick marine plywood conforming to IS: 710 sqm 720.00
8725 12 mm thick fire retardant plywood conforming to IS: 5509 sqm 867.00
8726 1.5 mm thick decorative laminated sheet sqm 380.00
8727 1.0 mm thick decorative laminated sheet sqm 294.00
8730 30 mm thick factory made glass fiber reinforced plastic flush door shutter i/c carriage
sqm 2675.00

8731 High polymer modified quickset tile adhesive kg 9.00

8732 Synthetic ployster triangular fibre of length 12 mm, effective diameter 10-40 microns
and specific gravity of 1.34 to 1.40 kg 370.00

8733 Synthetic ployster triangular fibre of length 6 mm, effective diameter 10-40 microns
and specific gravity of 1.34 to 1.40 kg 410.00

8734 P.V.C. Single piece extruded door frame of profile size 50 mm x 47mm with wall
thickness of 5 mm metre 265.00

8735 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile
non decorative finished (Matt finished) sqm 2295.00

8736 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile
decorative finished (wood grain finished) sqm 2707.00

8737 Stainless steel wire guage (Grade-304) aperture 1.4 mm and 0.50mm dia wire
sqm 413.00

8738 Factory made door frame fire rated (60 minutes) made with 16 SWG
G.I. Sheet of section 143 mm x 57 mm duly filled with vermuculite based concrete mix
metre 1062.00
8739 Fire rated door shuttere made with 16 SWG G.I. sheet (60 minutes) without panel
sqm 4702.00

8740 Fire seal Putty kg 304.00

8741 Clear fire resistant glass panes 6mm thick (60 minutes) sqm 21500.00
8742 G.I. U beading of 16 SWG G.I. sheet (zinc coating >120gm/ m²) with ceramic tape of
suitable thickness and fire resistant primer coating metre 303.00

8743 Matrix Mineral Board metre 70.00

8744 Panic Bar / latch (Double point) each 5200.00
8745 65 mm x 55 mm x 2 mm thick Factory made door frame of PVC extruded section in
white, grey or wooden finish metre 364.00

8746 37 mm thick Factory made shutter with style,rails and panels of PVC extruded section
in white or grey finish i/c carriage sqm 2479.00

8747 75 mm x 53 mm x 2.0 mm thick Factory made door frame of PVC extruded section in
white, grey or wooden finish metre 413.00

8748 37 mm thick Factory made fusion welded shutter with style, rails and panels of PVC
extruded section in wooden finish sqm 2703.00

8749 Zinc alloy (white powder coated) touch lock with hook for wire mesh shutter
each 133.00

8750 Zinc alloy (white powder coated) casement handle for uPVC window/door
each 130.00

8751 Zinc alloy (white powder coated) touch lock withhook for uPVC window/door
each 114.00
8752 Zinc alloy body with single nylon roller (weight bearing capacity to be 40 Kg) for uPVC
sliding window each 60.00

8753 Stainless Steel (SS - 304) with adjustable double nylon roller (weight bearing capacity
to be 120 Kg) for uPVC sliding door/ window

each 105.00
8754 Zinc alloy (white powder coated) cresent lock for uPVC sliding door/window
each 110.00

8755 Stainless steel friction hinge of size 200 mm x 19 x 1.9 mm for uPVC windows
each 212.00

8756 Stainless steel friction hinge of size 250 mm x 19 x 1.9 mm for uPVC windows
each 237.00

8757 Stainless steel friction hinges (SS-304 grade) size 300 x 19 x

1.9 mm for uPVC window each 260.00

8758 Stainless steel friction hinges (SS-304 grade) size 350 x 19 x

1.9 mm for uPVC window each 361.00

8759 Stainless steel friction hinges (SS-304 grade) size 400 x 19 x

1.9 mm for uPVC window each 365.00

8760 Glass panes of required thickness having 60 minutes of fire resistance both integrity
and radiation control (EI 60) and minimum 20 minutes of insulation (EI 20)

sqm 22500.00
8761 Scaffolding net made of high density polyethylene UV stabilized having density 100
gm/sqm sqm 22.00

8772 Aluminium Track on bottom rail for uPVC window metre 37.00
8773 Wool pile/ weather pile strip for uPVC sliding window metre 20.00
8774 Aluminium Grill as per IS 1868 kg 279.00
8775 Steel Galvanised tubular reinforcement for uPVC door/ window metre 62.00
8776 Stainless steel dash fastener of 8 mm dia and 75 mm long bolt each 17.00
8777 GI Fastener 100x8 mm each 15.00
8778 Toughened glass 12 mm thickness sqm 1750.00
8779 SS pipe 304 grades with press fit technology as per JIS 3448 standard 15.88 mm outer
dia metre 140.00

8780 SS pipe 304 grades with press fit technology as per JIS 3448
standard 22.22 mm outer dia metre 250.00

8781 SS pipe 304 grades with press fit technology as per JIS 3448 standard 28.58 mm outer
dia metre 310.00

8782 SS pipe 304 grades with press fit technology as per JIS 3448 standard 34.00 mm outer
dia metre 439.50

8783 SS pipe 304 grades with press fit technology as per JIS 3448 standard 42.70 mm outer
dia metre 450.00

8784 8 mm thick Calcium silicate perforated tiles of size 595 x595 mm sqm 850.00
8785 Interlocking C.C. paver block ( 80 mm thick, M-30) sqm 485.00
8786 Coupling/Socket fittings for 22.22 mm outer dia SS pipe each 70.00
8787 Coupling/Socket fittings for 28.58 mm outer dia SS pipe each 96.25
8788 Coupling/Socket fittings for 34.00 mm outer dia SS pipe each 135.00
8789 Coupling/Socket fittings for 42.70 mm outer dia SS pipe each 160.00
8790 Coupling/Socket fittings for 48.60 mm outer dia SS pipe each 180.00
8791 Reducer for 22.22 mm X 15.88 mm outer Dia SS pipe each 108.50
8792 Reducer for 28.58 mm X 15.88 mm outer Dia SS pipe each 152.50
8793 Reducer for 28.58 mm X 22.22 mm outer Dia SS pipe each 161.50
8794 Reducer for 34.00 mm X 15.88 mm outer Dia SS pipe each 200.00
8795 Reducer for 34.00 mm X 22.22 mm outer Dia SS pipe each 210.00
8796 Reducer for 34.00 mm X 28.58 mm outer Dia SS pipe each 210.00
8797 Reducer for 42.70 mm X 15.88 mm outer Dia SS pipe each 375.00
8798 Reducer for 42.70 mm X 22.22 mm outer Dia SS pipe each 375.00
8799 Reducer for 42.70 mm X 28.58 mm outer Dia SS pipe each 390.00
8800 Reducer for 42.70 mm X 34.00 mm outer Dia SS pipe each 390.00
8801 Reducer for 48.60 mm X 15.88 mm outer Dia SS pipe each 425.00
8802 Reducer for 48.60 mm X 22.22 mm outer Dia SS pipe each 425.00
8803 Reducer for 48.60 mm X 28.58 mm outer Dia SS pipe each 425.00
8804 Reducer for 48.60 mm X 34.00 mm outer Dia SS pipe each 425.00
8805 Reducer for48.60 mm X 42.70 mm outer Dia SS pipe each 425.00
8806 Slip Coupling / Socket 15.88 mm outer dia SS pipe each 55.00
8807 Slip Coupling / Socket 22.22 mm outer dia SS pipe each 70.00
8808 Slip Coupling / Socket 28.58 mm outer dia SS pipe each 95.00
8809 Slip Coupling / Socket 34.00 mm outer dia SS pipe each 135.00
8810 Slip Coupling / Socket 42.70 mm outer dia SS pipe each 160.00
8811 Slip Coupling / Socket 48.60 mm outer dia SS pipe each 175.00
8812 Elbow 90° for 15.88 mm outer dia SS pipe each 65.00
8813 Elbow 90° for 22.22 mm outer dia SS pipe each 70.00
8814 Elbow 90° for 28.58 mm outer dia SS pipe each 105.00
8815 Elbow 90° for 34.00 mm outer dia SS pipe each 120.00
8816 Elbow 90° for 42.70 mm outer dia SS pipe each 130.00
8817 Elbow 90° for 48.60 mm outer dia SS pipe each 160.00
8818 Reducing Elbow 90° for 22.22 mm X 15.88 mm outer dia SS pipe each 150.00
8819 Reducing Elbow 90° for 28.58 mm X 15.88 mm outer dia SS pipe each 210.00
8820 Reducing Elbow 90° for 28.58 mm X 22.22 mm outer dia SS pipe each 250.00
8821 Reducing Elbow 90° for 34.00 mm X 22.22 mm outer dia SS pipe each 295.00
8822 Reducing Elbow 90° for 34.00 mm X 28.58 mm outer dia SS pipe each 350.00
8823 Reducing Elbow 90° for 42.70 mm X 34.00 mm outer dia SS pipe each 190.00
8824 Equal Tee for 15.88 mm outer dia SS pipe each 175.00
8825 Equal Tee for 22.22 mm outer dia SS pipe each 250.00
8826 Equal Tee for 28.58 mm outer dia SS pipe each 295.00
8827 Equal Tee for 34.00 mm outer dia SS pipe each 440.00
8828 Equal Tee for 42.70 mm outer dia SS pipe each 695.00
8829 Equal Tee for 48.60 mm outer dia SS pipe each 915.00
8830 Reducing Tee for 22.22 mm X 15.88 mm outer dia SS each 185.00
8831 Reducing Tee for 28.58 mm X 15.88 mm outer dia SS pipe each 290.00
8832 Reducing Tee for 28.58 mm X 22.22 mm outer dia SS pipe each 290.00
8833 Reducing Tee for 34.00 mm X 15.88 mm outer dia SS pipe each 440.00
8834 Reducing Tee for 34.00 mm X 22.22 mm outer dia SS pipe each 440.00
8835 Reducing Tee for 34.00 mm X 28.58 mm outer dia SS pipe each 440.00
8836 Reducing Tee for 42.70 mm X 15.88 mm outer dia SS pipe each 690.00
8837 Reducing Tee for 42.70 mm X 22.22 mm outer dia SS pipe each 690.00
8838 Reducing Tee for 42.70 mm X 28.58 mm outer dia SS pipe each 690.00
8839 Reducing Tee for 42.70 mm X 34.00 mm outer dia SS pipe each 690.00
8840 Reducing Tee for 48.60 mm X 15.88 mm outer dia SS pipe each 895.00
8841 Reducing Tee for 48.60 mm X 22.22 mm outer dia SS pipe each 895.00
8842 Reducing Tee for 48.60 mm X 28.58 mm outer dia SS pipe each 895.00
8843 Reducing Tee for 48.60mm X 34.00 mm outer dia SS pipe each 895.00
8844 Reducing Tee for 48.60mm X 42.70mm outer dia SS pipe each 895.00
8845 Stainless steel Male thread Tee for 15.88 mm outer dia X 15 mm nominal dia
threaded each 185.00

8846 Stainless steel Male thread Tee for 22.22 mm outer dia X 15 mm nomina dia threaded
each 215.00
8847 Stainless steel Male thread Tee for 22.22 mm outer dia X 20 mm nominal dia
threaded each 215.00

8848 Stainless steel Male thread Tee for 28.58 mm outer dia X 15 mm nomina dia threaded
each 295.00

8849 Stainless steel Male thread Tee for 28.58 mm outer dia X 20 mm nominal dia
threaded each 295.00

8850 Stainless steel Male thread Tee for 28.58 mm outer dia X 25 mm nominal dia
threaded each 295.00

8851 Stainless steel Male thread Tee for 34.00 mm outer dia X 15 mm nominal dia
threaded each 465.00

8852 Stainless steel Male thread Tee for 34.00 mm outer dia X 20 mm nominal dia
threaded each 465.00

8853 Stainless steel Male thread Tee for 34.00 mm outer dia X 25 mm nominal dia
threaded each 465.00

8854 Stainless steel Male thread Tee for 34.00 mm outer dia X 32 mm nominal dia
threaded each 465.00

8855 Stainless steel Male thread Tee for 42.70 mm outer dia X 15 mm nominal dia
threaded each 710.00

8856 Stainless steel Male thread Tee for 42.70 mm outer dia X 20 mm nominal dia
threaded each 710.00

8857 Stainless steel Male thread Tee for 42.70 mm outer dia X 25 mm nominal dia
threaded each 710.00

8858 Stainless steel Male thread Tee for 42.70 mm outer dia X 32 mm nominal dia
threaded each 710.00

8859 Stainless steel Male thread Tee for 42.70 mm outer dia X 40 mm nominal dia
threaded each 710.00

8860 Stainless steel Male thread Tee for 48.60 mm outer dia X 15 mm nominal dia
threaded each 895.00

8861 Stainless steel Male thread Tee for 48.60 mm outer dia X 20 mm nominal dia
threaded each 895.00

8862 Stainless steel Male thread Tee for 48.60 mm outer dia X 25 mm nominal dia
threaded each 895.00

8863 Stainless steel Male thread Tee for 48.60 mm outer dia X 32 mm nominal dia
threaded each 895.00

8864 Stainless steel Male thread Tee for 48.60 mm outer dia X 40 mm nominal dia
threaded each 895.00

8865 Stainless steel Male thread Tee for 48.60 mm outer dia X 50 mm nominal dia
threaded each 895.00

8866 Stainless steel Female thread Tee for 15.88 mm outer dia X 15 mm nominal dia
threaded each 185.00

8867 Stainless steel Female thread Tee for 22.22 mm outer dia X 15 mm nominal dia
threaded each 205.00

8868 Stainless steel Female thread Tee for 22.22 mm outer dia X 20 mm nominal dia
threaded each 205.00

8869 Stainless steel Female thread Tee for 28.58 mm outer dia X 15 mm nominal dia
threaded each 275.00

8870 Stainless steel Female thread Tee for 28.58 mm outer dia X 20 mm nominal dia
threaded each 275.00

8871 Stainless steel Female thread Tee for 28.58 mm outer dia X 25 mm nominal dia
threaded each 275.00
8872 Stainless steel Female thread Tee for 34.00 mm outer dia X 15 mm nominal dia
threaded each 445.00

8873 Stainless steel Female thread Tee for 34.00 mm outer dia X 20 mm nominal dia
threaded each 445.00

8874 Stainless steel Female thread Tee for 34.00 mm outer dia X 25 mm nominal dia
threaded each 445.00

8875 Stainless steel Female thread Tee for 34.00 mm outer dia X 32 mm nominal dia
threaded each 445.00

8876 Stainless steel Female thread Tee for 42.70 mm outer dia X 15 mm nominal dia
threaded each 700.00

8877 Stainless steel Female thread Tee for 42.70 mm outer dia X 20 mm nominal dia
threaded each 700.00

8878 Stainless steel Female thread Tee for 42.70 mm outer dia X 25 mm nominal dia
threaded each 700.00

8879 Stainless steel Female thread Tee for 42.70 mm outer dia X 32 mm nominal dia
threaded each 700.00

8880 Stainless steel Female thread Tee for 42.70 mm outer dia X 40 mm nominal dia
threaded each 700.00

8881 Stainless steel Female thread Tee for 48.60 mm outer dia X 15 mm
nominal dia threaded each 905.00

8882 Stainless steel Female thread Tee for 48.60 mm outer dia X 20 mm
nominal dia threaded each 905.00
8883 Stainless steel Female thread Tee for 48.60 mm outer dia X 25 mm
nominal dia threaded each 905.00
8884 Stainless steel Female thread Tee for 48.60 mm outer dia X 32 mm
nominal dia threaded each 905.00
8885 Stainless steel Female thread Tee for 48.60 mm outer dia X 40 mm
nominal dia threaded each 905.00
8886 Stainless steel Female thread Tee for 48.60 mm outer dia X 50 mm
nominal dia threaded each 905.00
8887 Stainless steel Female threaded Connector/Adapter for 15.88 mm
outer dia X 15 mm nominal threaded each 195.00
8888 Stainless steel Female threaded Connector/Adapter for 22.22 mm
outer dia X 15 mm nominal threaded each 230.00
8889 Stainless steel Female threaded Connector/Adapter for 22.22 mm
outer dia X 20 mm nominal threaded each 240.00
8890 Stainless steel Female threaded Connector/Adapter for 28.58 mm
outer dia X 15 mm nominal threaded each 277.00
8891 Stainless steel Female threaded Connector/Adapter for 28.58 mm
outer dia X 20 mm nominal threaded each 290.00
8892 Stainless steel Female threaded Connector/Adapter for 28.58 mm
outer dia X 25 mm nominal threaded each 355.00
8893 Stainless steel Female threaded Connector/Adapter for 34.00 mm outer dia X 25
mm nominal threaded each 410.00

8894 Stainless steel Female threaded Connector/Adapter for 34.00 mm

outer dia X 32 mm nominal threaded each 540.00
8895 Stainless steel Female threaded Connector/Adapter for 42.70 mm
outer dia X 32 mm nominal threaded each 595.00
8896 Stainless steel Female threaded Connector/Adapter for 42.70 mm
outer dia X 40 mm nominal threaded each 695.00
8897 Stainless steel Female threaded Connector/Adapter for 48.60 mm
outer dia X 40 mm nominal threaded each 845.00
8898 Stainless steel Female threaded Connector/Adapter for 48.60 mm
outer dia X 50 mm nominal threaded each 975.00
8899 Stainless steel Male threaded Connector/Adapter for 15.88 mm
outer dia X 15 mm nominal threaded each 195.00
8900 Stainless steel Male threaded Connector/Adapter for 22.22 mm
outer dia X 15 mm nominal threaded each 230.00
8901 Stainless steel Male threaded Connector/Adapter for 22.22 mm
outer dia X 20 mm nominal threaded each 255.00
8902 Stainless steel Male threaded Connector/Adapter for 28.58 mm
outer dia X 20 mm nominal threaded each 325.00
8903 Stainless steel Male threaded Connector/Adapter for 28.58 mm
outer dia X 25 mm nominal threaded each 325.00
8904 Stainless steel Male threaded Connector/Adapter for 34.00 mm
outer dia X 25 mm nominal threaded each 475.00
8905 Stainless steel Male threaded Connector/Adapter for 34.00 mm
outer dia X 32 mm nominal threaded each 565.00
8906 Stainless steel Male threaded Connector/Adapter for 42.70 mm
outer dia X 32 mm nominal threaded each 649.00
8907 Stainless steel Male threaded Connector/Adapter for 42.70 mm
outer dia X 40 mm nominal threaded each 730.00
8908 Stainless steel Male threaded Connector/Adapter for 48.60 mm
outer dia X 40 mm nominal threaded each 850.00
8909 Stainless steel Male threaded Connector/Adapter for 48.60 mm
outer dia X 50 mm nominal threaded each 1140.00
8910 Stainless steel Valve Connector for 15.88 mm outer dia X 15 mm
nominal dia threaded each 235.00
8911 Stainless steel Valve Connector for 22.22 mm outer dia X 15 mm
nominal dia threaded each 280.00
8912 Stainless steel Valve Connector for 22.22 mm outer dia X 20 mm
nominal dia threaded each 310.00
8913 Stainless steel Valve Connector for 28.58 mm outer dia X 25 mm
nominal dia threaded each 425.00
8914 Stainless steel Valve Connector for 34.00 mm outer dia X 32 mm
nominal dia threaded each 645.00
8915 Stainless steel Valve Connector for 42.70 mm outer dia X 40 mm
nominal dia threaded each 880.00
8916 Stainless steel Valve Connector for 48.60 mm outer dia X 50 mm
nominal dia threaded each 1210.00
8917 SS Female Threaded Elbow 90o for 15.88 mm outer dia X 15 mm
nominal dia threaded each 160.00
8918 Stainless steel Female Threaded Elbow 90o for 22.22 mm outer dia X 15 mm nominal
dia threaded each 215.00

8919 Stainless steel Female Threaded Elbow 90o for 22.22 mm outer dia X
20 mm nominal dia threaded each 215.00
8920 Stainless steel Female Threaded Elbow 90o for 28.58 mm outer dia X
25 mm nominal dia threaded each 215.00
8921 Stainless steel Female Threaded Elbow 90o for 34.00 mm outer dia X
32 mm nominal dia threaded each 295.00
8922 Stainless steel Female Threaded Elbow 90o for 42.70 mm outer dia X
32 mm nominal dia threaded each 480.00
8923 Stainless steel Female Threaded Elbow 90o for 42.70 mm outer dia X
40 mm nominal dia threaded each 480.00
8924 Stainless steel Female Threaded Elbow 90o for 48.60 mm outer dia X
 40 mm nominal dia threaded each 710.00
8925 Stainless steel Female Threaded Elbow 90o for 48.60 mm outer dia X
50 mm nominal dia threaded each 710.00
8926 Stainless steel Male Threaded Elbow 90o for 15.88 mm outer dia X
15 mm nominal dia threaded each 195.00
8927 Stainless steel Male Threaded Elbow 90o for 22.22 mm outer dia X
15 mm nominal dia threaded each 225.00
8928 Stainless steel Male Threaded Elbow 900 for 22.22 mm outer dia X
20 mm nominal dia threaded each 225.00
8929 Stainless steel Male Threaded Elbow 900 for 28.58 mm outer dia X
25 mm nominal dia threaded each 225.00
8930 Stainless steel MaleThreaded Elbow 900 for 34.00 mm outer dia X
25 mm nominal dia threaded each 290.00
8931 Stainless steel Male Threaded Elbow 900 for 34.00 mm outer dia X
32 mm nominal dia threaded each 290.00
8932 Stainless steel Male Threaded Elbow 900 for 42.70 mm outer dia X 32 mm nominal
dia threaded each 480.00

8933 Stainless steel Male Threaded Elbow 900 for 42.70 mm outer dia X 40 mm nominal
dia threaded each 480.00

8934 Stainless steel Male Threaded Elbow 900 for 48.60 mm outer dia X 40 mm nominal
dia threaded each 695.00

8935 Stainless steel Male Threaded Elbow 900 for 48.60 mm outer dia X 50 mm nominal
dia threaded each 695.00

8936 Stainless steel Cap for 15.88 mm outer dia pipe each 48.00
8937 Stainless steel Cap for 22.22 mm outer dia pipe each 70.00
8938 Stainless steel Cap for 28.58 mm outer dia pipe each 90.00
8939 Stainless steel Cap for 34.00 mm outer dia pipe each 175.00
8940 Stainless steel Cap for 42.70 mm outer dia pipe each 250.00
8941 Stainless steel Cap for 48.60 mm outer dia pipe each 325.00
8942 Stainless steel Pipe Bridge for 15.88 mm outer dia pipe each 220.00
8943 Stainless steel Pipe Bridge for 22.22 mm outer dia pipe each 290.00
8944 Stainless steel Pipe Bridge for 28.58 mm outer dia pipe each 415.00
8945 4 Point facade glass bracket without flat head bolts Nos 3318.00
8946 2 Point facade glass bracket (wall mounted with out flat head bolt) Nos 1659.00
8947 1 Point facade glass bracket (wall mounted with out flat head bolt) Nos 1300.00
8948 Flate head bolt for brackets of spider glazing Nos 651.00
8949 400 mm long fin plate without fastners pair 5931.00
8953 Micro Silica kg 28.00
8954 Stop end tubes for diaphragmwall 600 mm dia. sqm 4.50
8955 Driving end tubes for diaphragm wall 600 mm dia. sqm 72.00
8956 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 15 kN/m in the longitudinal
and transverse direction sqm 120.00

8957 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 20kN/m in the longitudinal
and transverse direction sqm 135.00

8958 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 30kN/m in the longitudinal
and transverse direction sqm 205.00

8959 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 40kN/m in the longitudinal
and transverse direction sqm 290.00
8960 Geosynthetic Drainage with two filtering nonwoven geotextiles having a “W”
configuration as longitudinal parallel channels. Minimum thickness to be 7.2mm,
with two filtering UV stabilized polypropylene nonwoven geotextile of minimum
thickness of 0.75mm having pores of 150 micron and tensile strength of 8.0 kN/m and
having plane flow capacity of 2.1 L / (m.s) at hydraulic gradient of 1.0 & 20 kPa
pressure, tensile strength of 18 kN/m , with mass per unit area of 740 gsm.

sqm 530.00
8961 Geosynthetic Drainage Composite having thermobonding a draining core - HDPE
geonet comprises of two sets of parallel overlayed ribs integrally connected to have a
rhomboidal shape with a polyethylene film and a nonwoven geotextile having mass
per unit area 130 g/m2 and tensile strength of 8.0 kN/m having in plane flow capacity
of 0.7 L / (m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and tensile strength of
13.5 kN/m , with mass per unit area of 830 gsm,

sqm 630.00
8962 Synthetic Geogrid having Ultimate tensile strength- 100 kN/m sqm 200.00
8963 Synthetic Geogrid Ultimate tensile strength- 150 kN/m sqm 210.00
8964 Synthetic Geogrid Ultimate tensile strength- 200 kN/m sqm 340.00
8965 Synthetic Geogrid Ultimate tensile strength- 250 kN/m sqm 350.00

8966 Synthetic Geogrid Ultimate tensile strength- 300kN/m sqm 360.00

8967 Synthetic Geogrid Ultimate tensile strength- 350kN/m sqm 370.00
8968 Synthetic Geogrid Ultimate tensile strength- 400kN/m sqm 450.00
8969 Synthetic Geogrid Ultimate tensile strength- 500kN/m sqm 500.00
8970 Synthetic Geogrid Ultimate tensile strength- 600kN/m sqm 550.00
8971 Synthetic Geogrid Ultimate tensile strength- 700kN/m sqm 650.00
8972 Synthetic Geogrid Ultimate tensile strength- 800kN/m sqm 725.00
8973 Synthetic Geogrid Ultimate tensile strength- 900kN/m sqm 850.00
8974 Synthetic Geogrid Ultimate tensile strength- 1000kN/m sqm 950.00
8975 Synthetic Geogrid Ultimate tensile strength- 1100kN/m sqm 1000.00
8976 Synthetic Geogrid Ultimate tensile strength- 1200kN/m sqm 1050.00
8977 Aluminium profile industrial troughed sheet of Alloy 31500/31000/ 40800,
conforming to IS 1254, IS 737, IS 2676, 0.71 mm thick, the profile detail width 1044/920
mm, cover width 1000/875 mm.
sqm 600.00
8978 Aluminium profile industrial troughed sheet of Alloy 31500/31000/ 40800,
conforming to IS 1254, IS 737, IS 2676, 0.91 mm thick, the profile detail width 1044/920
mm, cover width 1000/875 mm.
sqm 785.00
8979 Uni Axial Woven polyster geogrid of minimum tensile strength 40KN/m in the
Longitudinal direction and 20 KN/m in the Transverse direction. sqm 139.00

8980 Uni Axial Woven polyster geogrid of minimum tensile strength 60KN/m in the
Longitudinal direction and 20 KN/m in the Transverse direction sqm 161.00

8981 Uni Axial Woven polyster geogrid of minimum tensile strength 80 KN/m in the
Longitudinal direction and 30 KN/m in the Transverse direction. sqm 205.00

8982 Uni Axial Woven polyster geogrid of minimum tensile strength 100KN/m in the
Longitudinal direction and 30KN/m in the Transverse direction. sqm 237.00

8983 Uni Axial Woven polyster geogrid of minimum tensile strength 120KN/m in the
Longitudinal direction and 30KN/m in the Transverse direction.
sqm 254.00
8984 Uni Axial Woven polyster geogrid of minimum tensile strength 150KN/m in the
Longitudinal direction and 30 KN/m in the Transverse direction.
sqm 319.00
8985 Uni Axial Woven polyster geogrid of minimum tensile strength 200KN/m in the
Longitudinal direction and 30 KN/m in the Transverse direction.
sqm 375.00
8986 Uni Axial Woven polyster geogrid of minimum tensile strength 250KN/m in the
Longitudinal direction and 30KN/m in the Transverse direction.
sqm 458.00
8987 Uni Axial Woven polyster geogrid of minimum tensile strength 300KN/m in the
Longitudinal direction and 30KN/m in the Transverse direction.
sqm 529.00
8988 Bi Axial Woven polyster geogrid of minimum tensile strength 20KN/m in both
Longitudinal and Transverse direction. sqm 114.00

8989 Bi Axial Woven polyster geogrid of minimume tensile strength 40KN/m in both
Longitudinal and Transverse direction. sqm 173.00

8990 Bi Axial Woven polyster geogrid of minimum tensile strength 60KN/m in both
Longitudinal and Transverse direction. sqm 223.00

9001 C.P. Brass Centre Hole Basin Mixer With Cast Spout each 1600.00
9977 Carriage L.S. 2.12
9988 Carriage and sundries L.S. 2.12
9999 Sundries L.S. 2.12

BASIC RATES
0.4 CARRIAGE CODES
(Carriage for 5.0 km lead by Mechanical Transport including loading, Unloading and stacking).
Note: - These rates are exclusive of GST, contractor’s profit and overhead charges.

Code Description Unit Basic rate

No. as on or just
before
01.04.2021

2200 Steam coal tonne 187.35

2201 Bricks 1000 Nos 437.15

2202 Stone aggregate below 40 mm nominal size cum 163.93
2203 Coarse sand cum 163.93
2204 Timber cum 187.35
2205 Steel tonne 145.72
2206 Stone aggregate 40 mm nominal size and above cum 178.19
2207 Brick tiles 1000 Nos 262.29
2208 Lime cum 163.93
2209 Cement tonne 145.72
2211 Tar bitumen tonne 163.93
2215 Soling stone & masonry stone cum 192.86
2216 Stone blocks white & red sand stone & kota stone slab tonne 145.72
2224 S.W. pipes100 mm dia 100 metre 218.58
2225 S.W. pipes150 mm dia 100 metre 437.15
2226 S.W. pipes200 mm dia 100 metre 728.59
2228 S.W. pipes250 mm dia 100 metre 1249.01
2229 S.W. pipes300 mm dia 100 metre 1561.26
2241 Good earth cum 204.92
2242 Dump manure cum 178.19
2260 Brick aggregate cum 178.19
2261 Sand cum 163.93
2262 Fly ash cum 163.93
2264 Rubbish cum 163.93
2265 Moorum cum 163.93
2266 Surkhi cum 163.93
2267 Stone dust cum 163.93
2268 Marble dust and marble chips cum 163.93
2271 G.I. pipes below 100 mm dia tonne 145.72

2272 Stainless Steel pipe below 100 mm dia tonne 145.72

2273 A.C.sheet and accessories tonne 145.72
2275 R.C.C. pipes 100 mm dia 100 metre 358.32
2281 R.C.C. pipes 150 mm dia 100 metre 597.20
2287 R.C.C. pipes 250 mm dia 100 metre 1380.48
2290 R.C.C. pipes 300 mm dia 100 metre 1706.30
2299 R.C.C. pipes 450 & 500 mm dia 100 metre 3981.36
2302 G.I.sheet and accessories tonne 145.72
2303 R.C.C. pipes 600, 700, 750 & 800 mm dia 100 metre 5972.04
2308 Plaster of paris tonne 145.72
2309 Cast iron fittings tonne 145.72
2311 Red bajri cum 163.93
2314 Barbed wire tonne 145.72
2317 Sludge cum 178.19
2319 Spun iron S & S pipes 100 mm dia 100 metre 358.32
2320 Spun iron S & S pipes 125 mm dia 100 metre 478.64
2321 Spun iron S & S pipes 150 mm dia 100 metre 597.20
2322 Spun iron S & S pipes 200 mm dia 100 metre 971.45
2323 Spun iron S & S pipes 250 mm dia 100 metre 1380.48
2324 Spun iron S & S pipes 300 mm dia 100 metre 1706.30
2325 Spun iron S & S pipes 350 mm dia 100 metre 2388.82
2326 Spun iron S & S pipes 400 mm dia 100 metre 3257.48
2327 Spun iron S & S pipes 450 mm dia 100 metre 3981.36
2328 Spun iron S & S pipes 500 mm dia 100 metre 3981.36
2329 Spun iron S & S pipes 600mm dia 100 metre 5972.04
2330 C.I. pipes 500 mm dia 100 metre 3981.36
2331 R.C.C. pipes 900 mm dia 100 metre 8958.06
2332 R.C.C. pipes 1000 mm dia 100 metre 11944.08
2333 R.C.C. pipes 1100 mm dia 100 metre 11944.08
2334 R.C.C. pipes 1200 mm dia 100 metre 11944.08
2335 Jamuna sand cum 163.93
2336 RCC pipe above 1200 mm dia & up to 1800 mm dia 100 metre 11944.08
2341 Pig lead tonne 145.72

2342 Solvent/ Diesel quintal 16.39

2343 Ductile iron pipes (k7) 100 mm dia 100 metre 358.32
2344 Cast iron pipes 150 mm dia 100 metre 597.20
2345 Cast iron pipes 200 mm dia 100 metre 971.45
2346 Cast iron pipes 250 mm dia 100 metre 1380.48
2347 Cast iron pipes 300 mm dia 100 metre 1706.30
2348 Cast iron pipes 350 mm dia 100 metre 2388.82
2349 Cast iron pipes 400 mm dia 100 metre 3257.48
2350 Cast iron pipes 450 mm dia 100 metre 3981.36
2351 Cast iron pipes 500 mm dia 100 metre 3981.36
2352 Cast iron pipes 600 mm dia 100 metre 5972.04
2353 Cast iron pipes 700 mm dia 100 metre 5972.04
2355 Cast iron pipes 800 mm dia 100 metre 5972.04
2356 Cast iron pipes 900 mm dia 100 metre 8958.06
2357 Cast iron pipes 1000 mm dia 100 metre 11944.08
2358 Carriage of Bamboo Mat corrugated sheets and accessories tonne 17700.00
 SUB HEAD : 1.0
CARRIAGE OF MATERIALS

79
 BASIC RATES (SH: 1.0 CARRIAGE OF MATERIALS)
Code Description Unit Rate
No.

0084 Hire charges of diesel truck - 9 tonne (witout POL) day 2000.00

0114 Beldar day 645.00

0115 Coolie day 645.00
0128 Mate day 714.00
1235 Diesel litre 80.87
5001 Mobil oil litre 318.00
9999 Sundries L.S. 2.12
1.0 CARRIAGE OF MATERIALS
Note:- These rates are inclusive of GST on work contract, Contractor's profit and over heads, Cess etc.
1.1 By Mechanical Transport including loading,unloading and stacking

Item Materials Unit of Rate i/c GST on Work Contract @ 12%, 15% CP & OH and 1% Ces
Code rates 1 km 2 km 3 km 4 km 5 km Beyond B
km 10 km 20 k
upto 10 upto 20 p
addl. km km

1 2 3 4 5 6 7 8 9
1.1.1 Lime, moorum, building cum 144.32 163.18 181.85 199.77 217.16
rubbish

1.1.2 Earth cum 180.40 203.98 227.31 249.71 271.45

1.1.3 Manure or sludge cum 156.87 177.37 197.66 217.14 236.04

1.1.4 Excavated rock cum 288.63 326.37 363.69 399.53 434.32

1.1.5 Sand, stone aggregate cum 144.32 163.18 181.85 199.77 217.16
below 40 mm nominal size

1.1.6 Stone aggregate 40 mm cum 156.87 177.37 197.66 217.14 236.04

nominal size and above
1.1.7 Soling stone cum 169.78 191.98 213.94 235.02 255.48
1.1.8 Bricks 1000 Nos. 384.84 435.16 484.93 532.71 579.09
1.1.9 Brick Tiles 1000 Nos. 230.91 261.09 290.96 319.63 347.46
1.1.10 Cement, stone blocks, tonne 128.28 145.05 161.64 177.57 193.03
G.I.. C.I., A.C., & C.C.
pipes below 100 mm dia
 and other heavy materials

Code rates 1 km 2 km 3 km 4 km 5 km Beyond

1.1.11 Steel tonne 128.28 145.05 161.64 177.57 193.03

1.1.12 Timber cum 164.93 186.50 207.83 228.30 248.18
1.1.13 Tar Bitumen tonne 144.32 163.18 181.85 199.77 217.16
1.1.14 Solvent, diesel qtl 14.43 16.32 18.18 19.98 21.72
1.1.15 Steam coal tonne 164.93 186.50 207.83 228.30 248.18
1.1.16 S.W. pipe
1.1.16.1 100 mm dia 100 m 192.42 217.58 289.55 266.36 289.55
1.1.16.2 150 mm dia 100 m 384.84 435.16 484.93 532.71 579.09
1.1.16.3 200 mm dia 100 m 641.41 725.26 808.21 887.85 965.15
1.1.16.5 250 mm dia 100 m 1099.56 1243.30 1385.50 1522.03 1654.55
1.1.16.6 300 mm dia 100 m 1374.45 1554.13 1731.88 1902.54 2068.19
1.1.16.7 350 mm dia 100 m 1924.22 2175.78 2424.63 2663.56 2895.46
1.1.16.8 400 mm dia 100 m 2748.89 3108.26 3463.75 3805.08 4136.38
1.1.16.9 450 mm dia 100 m 3498.59 3955.97 4408.41 4842.83 5264.48
1.1.16.10 500 mm dia 100 m 3848.45 4351.56 4849.25 5327.11 5790.93
1.1.16.11 600 mm dia 100 m 4810.56 5439.46 6061.56 6658.89 7238.66
1.1.17 R.C.C. pipe,
A.C. pipes, steel
cylinder, R.C. pipes,
S.C.I. pipes, C.I. pipes
and unreinforced
cement pipes
5 km
upto 10
km per
km
1 2 3 4 5 6 7 8 9
 Code rates 1 km 2 km 3 km 4 km 5 km Beyond

1.1.17.1 100 mm dia 100 m 315.45 356.69 397.48 436.65 474.67

1.1.17.2 125 mm dia 100 m 421.36 476.45 530.94 583.26 634.04
1.1.17.3 150 mm dia 100 m 525.74 594.48 662.47 727.75 791.11
1.1.17.4 200 mm dia 100 m 855.21 967.01 1077.61 1183.80 1286.87
1.1.17.5 250 mm dia 100 m 1215.30 1374.18 1531.34 1682.25 1828.71
1.1.17.6 300 mm dia 100 m 1502.13 1698.50 1892.76 2079.28 2260.32
1.1.17.7 350 mm dia 100 m 2102.98 2377.90 2649.86 2910.99 3164.44
1.1.17.8 400 mm dia 100 m 2867.70 3242.60 3613.45 3969.53 4315.15
1.1.17.9 450 mm & 100 m 3504.96 3963.17 4416.44 4851.65 5274.07
500 mm dia
1.1.17.10 600, 700, 750 & 100 m 5257.44 5944.76 6624.66 7277.47 7911.11
800 mm dia
1.1.17.11 900 mm dia 100 m 7886.16 8917.14 9936.99 10916.21 11866.66
1.1.17.12 1000, 1100 & 100 m 10514.88 11889.52 13249.32 14554.95 15822.21
1200 mm dia

5 km
upto 10
km per
km
1 2 3 4 5 6 7 8 9
Code Description
No.

1.1.18 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical trans
loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as p
Engineer-in-charge.

Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carryin
3.5 cum or more.
1.0 CARRIAGE OF MATERIALS
Note:- These rates are inclusive of GST on work contract, Contractor's profit and over heads, Cess etc.
1.2 By Manual Labour including loading, unloading and stacking for lead less than 0.50 KM

Code Material Unit Cost of carriage Every additional Remarks

No. inclusing loading, lead of 50 metre
unloading & or part thereof
stacking for first beyond 1st 50
50 metres metre upto 9
( ) such additional
lead ( )
1 2 3 4 5 6
1.2.1 Lime, moorum, building cum 187.24 40.77
The rates ill be applicable to net
rubbish quantities after
deduction of prescribed
1.2.2 Earth cum 234.05 50.96 percentage for voids
1.2.3 Manure or sludge cum 203.52 44.31 mentioned in the
specification under
1.2.4 Excavated rock cum 374.48 81.54
1.2.5 Sand, stone aggregate below cum 234.05 50.96
40 mm nominal size

1.2.6 Stone aggregate 40 mm cum 253.03 55.09

nominal size and above
subhead "Carriage of Materials"

1.2.7 Soling stone cum 275.35 59.95

1.2.8 Bricks 1000 Nos 436.90 95.13
1.2.9 Brick Tiles 1000 Nos 273.06 59.45
1.2.10 Steam Coal tonne 164.06 47.56
1.2.11 Stone blocks,G.I.,C.I. tonne 170.89 25.08
Stainless Steel pipes
below 100 mm dia and
other heavy material

1.2.12 Cement tonne 135.55 19.89

1.2.13 Steel tonne 291.14 42.72
1.2.14 Timber cum 187.16 27.46
1.2.15 Tar, bitumen etc. tonne 170.89 25.08
1.2.16 S.W. pipe The length of S.W. pipes
1.2.16.1 100 mm dia 100 m 342.07 will be measured
50.19
exclusive of the internal
1.2.16.2 150 mm dia 100 m 562.28 82.51 depth of sockets.
1.2.16.3 200 mm dia 100 m 786.86 115.46
1.2.16.5 250 mm dia 100 m 1310.12 192.25

1.2.16.6 300 mm dia 100 m 1871.60 274.64

1.2.16.7 350 mm dia 100 m 2620.24 384.49

1.2.16.8 400 mm dia 100 m 3275.30 480.61
1.2.16.9 450 mm dia 100 m 3970.06 582.56
1.2.16.10 500 mm dia 100 m 4852.29 712.02
1.2.16.11 600 mm dia 100 m 5955.08 873.84
1.2.17 R.C.C. pipes, Steel
cylinder, R.C. pipes,
C.I. pipes, and
unreinforced
cement pipes
1.2.17.1 100 mm dia 100 m 461.85 67.77 The length of the flanged or

1.2.17.2 125 mm dia 100 m 565.11 plain ended concrete, R.C.C.

82.92
pipes, Steel cylinders, R.C.
1.2.17.3 150 mm dia 100 m 650.72 95.49 pipes and C.I. pipes shall be
1.2.17.4 200 mm dia 100 m 976.49 measured overall. The length
143.29
of socketed pipes shall be
1.2.17.5 250 mm dia 100 m 1716.31 251.85 measured exclusive of inter-
nal depth of sockets.
1.2.17.6 300 mm dia 100 m 2147.73 315.16
1.2.17.7 350 mm dia 100 m 3070.59 450.58
1.2.17.8 400 mm dia 100 m 3573.05 524.31
1.2.17.9 450 mm & 100 m 4764.07 699.08
500 mm dia
1.2.17.10 600, 700, 750 & 100 m 5240.47 768.98
800 mm dia

1 2 3 4 5 6

Code Description Unit Rate Remarks

No.

1 2 3 4 5
1.3 Loading in or unloading cement from tonne 139.65
the railway wagons at siding and carrying the
same from or into godowns adjacent to the
siding, in- cluding stacking the same properly in
rows upto any height as per di- rection of
Engineer-in-charge, sweeping the wagons and
screen- ing the swept cement and filling in bags
complete.
1.4 Loading in or unloading from the
railway wagons as per direction
of Engineer-in-charge :

1.4.1 Steel tonne 207.00 The rates will be applicable in all cases whethe
materials are unloaded or loaded from Railway siding or directly unloaded on
or loaded from transport.
1.4.2 G.I., C.I., R.C.C. or C.C. pipes upto tonne 122.70
500 mm dia and similar heavy materials
1.4.3 Heavy materials where each piece tonne 218.10 No deduction shall be from
or bundle, crate or case weighs more carriage rates for direct unloading
than one tonne and R.C.C., C.I. and or loading. concrete pipes above 500 mm dia.
SUB HEAD : 2.0
EARTH WORK
 89

BASIC RATES (SH: 2.0 EARTH WORK)

Code Description Unit Rate
No.

0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 3000.00

0017 Hire and running charges of tipper day 3750.00

0018 Hire and running charges of loader day 6000.00
0020 Hydraulic Excavator (3D) with driver and fuel day 7000.00
0101 Bhisti day 714.00
0103 Blacksmith 2nd class day 714.00
0112 Carpenter 2nd class day 714.00
0113 Chowkidar day 645.00
0114 Beldar day 645.00
0115 Coolie day 645.00
0124 Mason (brick layer) 2nd class day 714.00
0128 Mate day 714.00
0132 Rock Excavator day 645.00
0133 Rock Breaker day 645.00
0134 Rock Hole Driller day 645.00
0135 Stone Chiseller day 714.00
0302 Safeda ballies 125 mm diameter metre 40.00
0325 Blasting powder kg 40.00
0326 Blasting fuse (fuse wire) each 15.00
0771 Kerosene oil litre 50.00
1197 Second class kail wood in scantling 10 cudm 260.00
1198 Second class kail wood in planks 10 cudm 260.00
1235 Diesel litre 80.87
1980 Fly ash cum 11.00
2204 Carriage of Timber cum 187.35
2262 Carriage of Flyash cum 163.93
2335 Carriage of sand cum 163.93
2342 Carriage of Solvent / Diesel. quintal 16.39
6501 Sand zone V (Jamuna) cum 1300.00
7022 Chlorpyriphos 20% E.C. / Lindane 20% E.C. litre 150.00
9999 Sundries L.S. 2.12

2.0 E A R T H W O R K
Code Description Unit Rate
No.
2.1 Earth work in surface excavation not exceeding 30 cm in depth but exceeding
1.5 m in width as well as 10 sqm on plan including getting out and disposal of
excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-
Charge:

2.1.1 All kinds of soil sqm 107.00

2.2 Earth work in rough excavation, banking excavated earth in layers not
exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½
tonne roller or wooden or steel rammers, and rolling every 3rd and top-most
layer with power roller of minimum 8 tonnes and dressing up in embankments
for roads, flood banks, marginal banks and guide banks or filling up ground
depressions, lead upto 50 m and lift upto 1.5 m :

2.2.1 All kinds of soil cum 862.70

2.3 Banking excavated earth in layers not exceeding 20 cm in depth, breaking
clods, watering, rolling each layer with ½ tonne roller, or wooden or steel
rammers, and rolling every 3rd and top-most layer with power roller of
minimum 8 tonnes and dressing up, in embankments for roads, flood banks,
marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m :

2.3.1 All kinds of soil cum 543.40

2.4 Deduct for not rolling with power roller of minimum 8 tonnes for banking
excavated earth in layers not exceeding 20 cm in depth. cum 4.40

2.5 Deduct for not watering the excavated earth for banking cum 38.20
2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual
means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10
sqm on plan) including getting out and disposal of excavated earth lead upto
50 m and lift upto 1.5 m, as directed by Engineer-in- charge.

2.6.1 All kinds of soil cum 205.45

2.7 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual
means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10
sqm on plan) including getting out and disposal of excavated earth lead upto
50 m and lift upto 1.5 m, as directed by Engineer-in- charge.

2.7.1 Ordinary rock cum 412.95

2.7.2 Hard rock (requiring blasting) cum 711.35
2.7.3 Hard rock (blasting prohibited) cum 1184.30
2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual
means in foundation trenches or drains (not exceeding 1.5 m in width or 10
sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5
m, including getting out the excavated soil and disposal of surplus excavated
soil as directed, within a lead of 50 m.
2.8.1 All kinds of soil. cum 286.85
2.9 Excavation work by mechanical means (Hydraulic excavator)/ manual
means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out
the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50
m.
2.9.1 Ordinary rock cum 523.50
2.9.2 Hard rock (requiring blasting) cum 846.25
2.9.3 Hard rock (blasting prohibited) cum 1258.60
2.10 Excavating trenches of required width for pipes, cables, etc including
excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m,
including getting out the excavated soil, and then returning the soil as required, in layers
not exceeding 20 cm in depth, including consolidating each deposited layer by ramming,
watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

2.10.1 All kinds of soil

2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia. metre 255.55
2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but
not exceeding 300 mm dia metre 417.35
2.10.1.3 Pipes, cables etc. exceeding 300 mm dia but
not exceeding 600 mm metre 651.55
2.11 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth
exceeding 1.5 m, but not exceeding 3 m. (Rate is over
corresponding basic item for depth upto 1.5 metre). metre 127.00
2.12 Extra for excavating trenches for pipes, cables, etc, in all kinds of soil for depth
exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item
for depth upto 1.5 metre.)
metre 314.95
2.13 Excavating trenches of required width for pipes, cables, etc, including
excavation for sockets, depth upto 1.5 m, including getting out the excavated materials,
returning the soil as required in layers not exceeding 20 cm in depth, including
consolidating each deposited layers by ramming, watering etc., stacking serviceable
material for measurements and disposal of unserviceable material as directed, within a
lead of 50 m :

2.13.1 Ordinary rock :

2.13.1.1 Pipes, cables etc. not exceeding 80 mm dia metre 376.95
2.13.1.2 Pipes, cables etc. exceeding 80 mm dia but
not exceeding 300 mm dia metre 933.35
2.13.1.3 Pipes, cables exceeding 300 mm dia but not
exceeding 600 mm dia metre 1074.00
2.13.2 Hard rock (requiring blasting)
2.13.2.1 Pipes, cables etc. not exceeding 80 mm dia metre 531.85
2.13.2.2 Pipes, cables etc. exceeding 80 mm dia but
not exceeding 300 mm dia metre 1316.90
2.13.2.3 Pipes, cables etc. exceeding 300 mm dia but
not exceeding 600 mm dia metre 1515.20

2.13.3 Hard rock (blasting prohibited)

2.13.3.1 Pipes, cables etc. not exceeding 80 mm dia metre 726.65
2.13.3.2 Pipes, cables etc. exceeding 80 mm dia but not
exceeding 300 mm dia metre 1799.35

2.13.3.3 Pipes, cables etc. exceeding 300 mm dia but not

exceeding 600 mm dia metre 2070.50

2.14 Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock
exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item
for depth upto 1.5 metre)
metre 103.75
2.15 Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock
exceeding 3m in depth but not exceeding 4.5 m. (Rate is over correspondingbasic item for
depth upto 1.5 metre)
metre 256.15
2.16 Close timbering in trenches including strutting, shoring and packing cavities
(wherever required) complete. (Measurements to be taken of the face area timbered).

2.16.1 Depth not exceeding 1.5 m sqm 132.90

2.16.2 Depth exceeding 1.5 m but not exceeding 3 m sqm 145.55
2.16.3 Depth exceeding 3 m but not exceeding 4.5 m sqm 174.00
2.17 Close timbering in case of shafts, wells, cesspits, manholes and the like
including strutting, shoring and packing cavities (wherever required) etc. complete.
(Measurements to be taken of the face area timbered).

2.17.1 Depth not exceeding 1.5 m sqm 142.50

2.17.2 Depth exceeding 1.5 m but not exceeding 3 m sqm 169.35
2.17.3 Depth exceeding 3 m but not exceeding 4.5 m sqm 197.60
2.18 Close timbering over areas including strutting, shoring and packing cavities
(wherever required) etc. complete. (Measurements to be taken of the face area timbered):

2.18.1 Depth not exceeding 1.5 m sqm 119.10

2.18.2 Depth exceeding 1.5 m but not exceeding 3 m sqm 134.20
2.18.3 Depth exceeding 3 m but not exceeding 4.5 m sqm 149.95
2.19 Extra for planking, strutting and packing materials for cavities (in close
timbering) if required to be left permanently in position. (Face area of timber permanently
left to be measured).
sqm 1596.50
2.20 Open timbering in trenches including strutting and shoring complete
(measurements to be taken of the face area timbered):
2.20.1 Depth not exceeding 1.5 m sqm 68.55
2.20.2 Depth exceeding 1.5 m but not exceeding 3 m sqm 76.40
2.20.3 Depth exceeding 3 m but not exceeding 4.5 m sqm 89.35
2.21 Open timbering in case of shafts, wells, cesspits, manholes and the
like including strutting and shoring complete (Measurements to be taken of the face area
timbered):
2.21.1 Depth not exceeding 1.5 m sqm 62.35
2.21.2 Depth exceeding 1.5 m but not exceeding 3 m sqm 74.95
2.21.3 Depth exceeding 3 m but not exceeding 4.5 m sqm 91.60
2.22 Open timbering over areas including strutting, shoring etc. complete.
(Measurements to be taken of the face area timbered):
2.22.1 Depth not exceeding 1.5 m sqm 42.40
2.22.2 Depth exceeding 1.5 m but not exceeding 3 m sqm 50.80
2.22.3 Depth exceeding 3 m but not exceeding 4.5 m sqm 64.30
2.23 Extra for planking and strutting in open timbering if required to be left
permanently in position. (Face area of the timber permanently left to be measured).

sqm 822.05
2.24 Extra rates for quantities of works, executed:
 2.24.1 In or under water and/or liquid mud, including pumping out water as metre 20%
required depth
2.24.2 In or under foul position, including pumping out water as required metre 25%
depth
Note for item no. 2.24:- The extra percentage rate is applicable in respect of
each item but limited to quantities of work executed in these difficult conditions.
The unit, namely, metre depth, to be considered for payment, shall be the depth
measured from the sub soil water level up to the centre of gravity of the qty
executed in difficult conditions. The depth shall be reckoned correct to 0.10 m,
0.05 m or more shall be taken as
0.10 m and less than 0.05 m ignored.

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

cum 253.95
2.25(a) Excavating, supplying and filling of local earth (including royalty) by
mechanical transport upto a lead of 5km also including ramming and watering of the earth
in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

cum 368.65
2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / banking
excavated or stacked materials.
2.26.1 All kinds of soil cum 104.50
2.26.2 Ordinary or hard rock cum 187.40
2.27 Supplying and filling in plinth with sand under floors, including watering,
ramming, consolidating and dressing complete. cum 2161.20

2.28 Surface dressing of the ground including removing vegetation and in-
equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.
2.28.1 All kinds of soil sqm 28.15
2.29 Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same.

2.29.1 All kinds of soil sqm 28.50

2.30 Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the
excavated soil, then returning the soil as required in layers not exceeding 20cm in depth,
including consolidating each deposited layer by ramming, watering etc, disposing of
surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m.

2.30.1 All kinds of soil each 89.90

2.30.2 Ordinary rock each 160.90
2.30.3 Hard rock (requiring blasting) each 257.70
2.30.4 Hard rock (blasting prohibited) each 381.40
2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood,
trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level
and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

sqm 14.50
2.32 Clearing grass and removal of the rubbish up to a distance of 50 m outside the
periphery of the area cleared. sqm 7.40

2.33 Felling trees of the girth (measured at a height of 1 m above ground level),
including cutting of trunks and branches, removing the roots and stacking of serviceable
material and disposal of unserviceable material.

2.33.1 Beyond 30 cm girth upto and including 60 cm girth each 439.25

2.33.2 Beyond 60 cm girth upto and including 120 cm girth each 1957.15
2.33.3 Beyond 120 cm girth upto and including 240 cm girth each 9084.05
2.33.4 Above 240 cm girth each 18198.70
2.34 Supplying chemical emulsion in sealed containers including delivery as
specified.
2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% litre 200.90

2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL

anti-termite treatment (excluding the cost of chemical emulsion) :
2.35.1 Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface
substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:
2.35.1.1 With Chlorpyriphos/ Lindane E.C. 20% with 1%
concentration metre 32.30

2.35.2 Along the external wall below concrete or masonry apron us-
ing chemical emulsion @ 2.25 litres per linear metre includ-
ing drilling and plugging holes etc.:
2.35.2.1 With Chlorpyriphos/ Lindane E.C. 20% with 1%
concentration metre 44.70
2.35.3 Treatment of soil under existing floors using chemical emul-
sion @ one litre per hole, 300 mm apart including drilling
12 mm diameter holes and plugging with cement mortar 1 :2
(1 cement : 2 Coarse sand) to match the existing floor:
2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1%
concentration sqm 256.15
2.35.4 Treatment of existing masonry using chemical emulsion @
one litre per hole at 300 mm interval including drilling holes at
45 degree and plugging them with cement mortar 1:2 (1 ce-
ment : 2 coarse sand) to the full depth of the hole :
2.35.4.1 With Chlorpyriphos/Lindane E.C. 20% with 1%
concentration metre 35.75
2.35.5 Treatment at points of contact of wood work by chemical
emulsion Chlorpyriphos/ Lindane (in oil or kerosene based
solution) @ 0.5 litres per hole by drilling 6 mm dia holes at
downward angle of 45 degree at 150 mm centre to centre and
sealing the same. metre 257.55
2.36 Extra for levelling & neatly dressing of disposed soil completely as directed by
Engineer-in-charge. cum 76.70
2.37 Supply and stacking of Fly ash conforming to IRC- 58 at site, including
carriage, loading , unloading & stacking up to any lead (measured stacks will be reduced
by 20% for payment).
cum 234.05
2.38 Filling with available fly ash and earth (excluding rock) in trenches or
embankment in layers (each layer should not exceed 15 cm), with intermediate layer of
compacted earth (Soil density of 98%) after every four layers of compacted depth of fly
ash, sides & top layer of filling shall be done with earth having total minimum compacted
thickness 30 cm or as decided by Engineer -in-charge, including compacting each layer by
rolling/ ramming and watering, all complete as per drawing and

direction of Engineer -in - charge. cum 253.95

SUB HEAD : 3.0
MORTAR
 99

BASIC RATES (SH : 3.0 MORTAR)

Code Description Unit Rate
No.

0101 Bhisti day 714.00

0114 Beldar day 645.00

0367 Portland Cement (OPC-43 Grade) tonne 5000.00
0368 White Cement tonne 11200.00
0773 Unslaked lime quintal 300.00
0784 Marble dust/ powder cum 1130.00
0811 Mud (dry) cum 165.00
0982 Coarse sand (zone III) cum 1500.00
0983 Fine sand (zone IV) cum 900.00
1159 Stone dust cum 1100.00
1182 Surkhi cum 700.00
2203 Carriage of Coarse sand cum 163.93
2208 Carriage of Lime cum 163.93
2209 Carriage of Cement tonne 145.72
2261 Carriage of Fine sand (1 part of badarpur sand: 2 parts jamuna sand) cum 163.93
2267 Carriage of Stone dust cum 163.93
2268 Carriage of Marble dust and/or marble chips cum 163.93
9999 Sundries L.S. 2.12

3.0 MORTAR
Note : These rates are exclusive of GST, water charges, contractor's profit and overheads & cess.

Code Description Unit Rate

No.

3.1 Cement mortar 1:1 (1 cement : 1 fine sand) cum 6626.10

3.2 Cement mortar 1:2 (1 cement : 2 fine sand). cum 5129.25

3.3 Cement mortar 1:3 (1 cement : 3 fine sand). cum 4382.15

3.4 Cement mortar 1:4 (1 cement : 4 fine sand). cum 3713.20
3.5 Cement mortar 1:5 (1 cement : 5 fine sand). cum 3353.00
3.6 Cement mortar 1:6 (1 cement : 6 fine sand). cum 3044.30
3.7 Cement mortar 1:2 (1 cement : 2 coarse sand). cum 5699.25

3.8 Cement mortar 1:3 (1 cement : 3 coarse sand). cum 5024.15

3.9 Cement mortar 1:4 (1 cement : 4 coarse sand). cum 4355.20
3.10 Cement mortar 1:5 (1 cement : 5 coarse sand). cum 3995.00
3.11 Cement mortar 1:6 (1 cement : 6 coarse sand). cum 3686.30

3.12 Cement mortar 1:2 (1 cement : 2 stone dust). cum 5319.25

3.13 Cement mortar 1:2 (1 cement : 2 marble dust). cum 5347.75
3.14 Cement mortar 1:5 (1 cement : 5 marble dust). cum 3599.10
3.15 White cement mortar 1:2 (1 white cement : 2 marble dust). cum 9563.75
3.16 White cement mortar 1:3 (1 white cement : 3 marble dust). cum 7790.25

3.17 White cement mortar 1:5 (1 white cement : 5 marble dust). cum 5521.10
3.18 Mud mortar cum 823.15
3.19 Mortar in lime, surkhi (50% red and 50% light yellow) and marble dust
1:1.5:0.5 cum 3140.50
 SUB HEAD : 4.0
CONCRETE WORK

103
 BASIC RATES (SH: 4.0 CONCRETE WORK)
Code Description Unit Rate
No.

0002 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper day 800.00

0004 Production cost of concrete by batch mix plant cum 400.00

0009 Pumping charges of concrete including Hire charges of pump, piping work &
accessories etc. cum 210.00

0011 Hire charges of Pump set of capacity 4000 litres/hour day 700.00
0012 Vibrator (Needle type 40 mm) day 350.00
0029 Carriage of ready mixed concrete by rotatory transit mixer km/cum 37.30
0101 Bhisti day 714.00
0114 Beldar day 645.00
0115 Coolie day 645.00
0116 Fitter (grade 1) day 784.00
0123 Mason (brick layer) 1st class day 784.00
0124 Mason (brick layer) 2nd class day 714.00
0131 Painter day 714.00
0278 Manufactured sand derived from Recycled Concrete Aggregate (RCA) cum 741.00
0279 Recycled Concrete Aggregate (RCA) 20 mm nominal size cum 957.00
0280 Recycled Concrete Aggregate (RCA) 12.5 mm nominal size cum 957.00
0281 Recycled Concrete Aggregate (RCA) 10 mm nominal size cum 957.00
0282 Recycled Aggregate (RA) 40 mm nominal size cum 367.00
0283 Recycled Aggregate (RA) 20 mm nominal size cum 398.00
0284 Recycled Aggregate (RA) 10 mm nominal size cum 430.00
0287 Brick Aggregate (Single size) : 40 mm nominal size cum 650.00
0293 Stone Aggregate (Single size) : 40 mm nominal size cum 1300.00
0295 Stone Aggregate (Single size) : 20 mm nominal size cum 1400.00
0296 Stone Aggregate (Single size) : 12.5 mm nominal size cum 1350.00
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 1350.00
0309 Paving bitumen of grade VG-10 of approved quality tonne 25614.00
0367 Portland Cement (OPC-43 Grade) tonne 5000.00
0370 Coal (steam) quintal 440.00
0771 Kerosene oil litre 50.00
0982 Coarse sand (zone III) cum 1500.00
0983 Fine sand (zone IV) cum 900.00
Code Description Unit Rate
No.
1213 Water proofing materials kilogram 35.00

1880 Dismenteled P or S trap scrap (approx wt 2kg) kg 25.00

2202 Carriage of Stone aggregate below 40 mm nominal size cum 163.93
2203 Carriage of Coarse sand cum 163.93
2206 Carriage of Stone aggregate 40 mm nominal size and above cum 178.19
2209 Carriage of Cement tonne 145.72
2211 Carriage of Tar / Bitumen tonne 163.93
2260 Carriage of Brick aggregate cum 178.19
2261 Carriage of Fine sand (1 part of badarpur sand: 2 parts jamuna sand) cum 163.93
2262 Carriage of Flyash cum 163.93
7318 Plasticizer / super plasticizer kg 29.00
7319 Wall form panel 1250x500 mm each 860.00
7326 Corner angle 45x45x5 mm 1.50 m long each 240.00
7327 100 mm channel shoulder 2.5 m long each 910.00
7328 Double clip (bridge clip) each 76.00
7329 Single clip each 59.00
7330 M.S. tube 40 mm dia metre 215.00
7331 Wall form panel 1250x450 mm each 860.00
7332 Corner angle 45x45x5 mm 2.50 m long each 255.00
7333 Column clamp 450x1070 mm each 965.00
7334 Prop 2 m ( 2-3.5 m) each 635.00
8732 Synthetic ployster triangular fibre of length 12 mm, effective diameter 10-40
microns and specific gravity of 1.34 to 1.40 kg 370.00

9977 Carriage L.S. 2.12

9988 Carriage and sundries L.S. 2.12
9999 Sundries L.S. 2.12
4.0 CONCRETE WORK

Code Description Unit Rate

No.

CEMENT CONCRETE (CAST IN SITU)

4.1 Providing and laying in position cement concrete of specified grade excluding
the cost of centering and shuttering - All work up to plinth level :

4.1.2 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from

natural sources : 3 graded stone aggregate 20 mm nominal
size derived from natural sources) cum 7783.65
4.1.2A 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) including
manufactured sand derived from Recycled Concrete Aggregate (RCA) upto
25% : 3 graded stone aggregate 20 mm nominal
size Recycled Concrete Aggregate (RCA) upto 25%). cum 7555.05
4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural
sources : 4 graded stone aggregate 20 mm nominal size
derived from natural sources) cum 7365.15
4.1.3A 1:2:4 (1 cement : 2 coarse sand (zone-III) including
manufactured sand derived from Recycled Concrete Aggregate (RCA) upto
25% : 4 graded stone aggregate 20 mm nominal
size Recycled Concrete Aggregate (RCA) upto 25%) cum 7124.50
4.1.4 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural
sources : 4 graded stone aggregate 40 mm nominal size derived from natural
sources)
cum 7226.95
4.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural
sources : 6 graded stone aggregate 20 mm nominal size
derived from natural sources) cum 6833.40
4.1.5A 1:3:6 (1 Cement : 3 manufactured sand derived from Recycled
Concrete Aggregate (RCA) : 6 graded stone aggregate 20
mm nominal size Recycled Concrete Aggregate (RCA) ) cum 5815.05
4.1.5B 1:3:6 (1 cement : 3 manufactured sand derived from Recycled
concrete Aggregate (RCA) : 6 graded stone aggregate 20 mm
nominal size Recycled Aggregate (RA) ) cum 5122.25
4.1.6 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural
sources : 6 graded stone aggregate 40 mm nominal size
derived from natural sources) cum 6670.25
4.1.6A 1:3:6 (1 Cement : 3 manufactured sand derived from Recycled
Concrete Aggregate (RCA) : 6 graded stone aggregate 40 mm nominal size
Recycled Aggregate (RA) )
cum 5059.85
4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural
sources : 8 graded stone aggregate 40 mm nominal size
derived from natural sources) cum 6326.05
4.1.8A 1:4:8 (1 cement : 4 manufactured sand derived from Recycled
Concrete Aggregate (RCA) : 8 graded stone aggregate 40
mm nominal size Recycled Aggregate (RA) cum 4715.60
4.1.10 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural
sources : 10 graded stone aggregate 40 mm nominal size
derived from natural sources) cum 6050.65
4.1.10A 1:5:10 (1 cement : 5 manufactured sand derived from Recycled
Concrete Aggregate (RCA) : 10 graded stone aggregate 40
mm nominal size Recycled Aggregate (RA) ) cum 4440.25
4.1.11 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10
graded stone aggregate 40 mm nominal size derived from
 natural sources) cum 5660.45
4.1.12 1:2:3½:9 (1 ordinary portland cement : 2 Fly ash : 3½ coarse sand
(zone-III) derived from natural sources : 9 graded stone
aggregate 40 mm nominal size derived from natural sources) cum 6154.75
4.1.12A 1:2:3½:9 (1 ordinary portland cement : 2 Fly ash : 3½
manufactured sand derived from Recycled Concrete Aggregate
(RCA) : 9 graded stone aggregate 40 mm nominal size
Recycled Aggregate (RA) ) cum 4645.90
4.1.13 1:2½:4:11 (1 ordinary portland cement : 2½ fly ash : 4 coarse sand
(zone-III) derived from natural sources : 11 graded stone
aggregate 40 mm nominal size derived from natural sources) cum 5812.60
4.1.13A 1:2½:4:11 (1 ordinary portland cement : 2½ fly ash : 4
manufactured sand derived from Recycled Concrete Aggregate
(RCA) :11 graded stone aggregate 40 mm nominal size
Recycled Aggregate (RA) ) cum 4334.20
4.2 Providing and laying cement concrete in retaining walls, return walls, walls
(any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,
struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks,
plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of
centering, shuttering and finishing:

4.2.2 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural

sources : 3 graded stone aggregate 20 mm nominal
size derived from natural sources). cum 9793.75
4.2.2A 1:1½:3 (1 cement : 1½ coarse sand (zone-III) including
manufactured sand derived from Recycled Concrete Aggregate (RCA) upto
25% : 3 graded stone aggregate 20 mm nominal
size Recycled Concrete Aggregate (RCA) upto 25%) ). cum 9565.10
4.2.3 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural
sources : 4 graded stone aggregate 20 mm nominal size
derived from natural sources) cum 9375.20
4.2.3A 1:2:4 (1 Cement : 2 coarse sand (zone-III) including
manufactured sand derived from Recycled Concrete Aggregate (RCA) upto
25% : 4 graded stone aggregate 20 mm nominal
size Recycled Concrete Aggregate (RCA) upto 25%)). cum 9130.20
4.2.5 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural
sources : 6 graded stone aggregate 20 mm nominal size
derived from natural sources) cum 8843.45
4.2.5A 1:3:6 (1 cement : 3 manufactured sand derived from Recycled
Concrete Aggregate (RCA) : 6 graded stone aggregate 20 mm
nominal size Recycled Concrete Aggregate (RCA))
cum 7825.10
4.2.5B 1:3:6 (1 cement : 3 manufactured sand derived from Recycled
Concrete Aggregate (RCA) : 6 graded stone aggregate 20 mm
nominal size Recycled Aggregate (RA))
cum 7132.35
4.2.8 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural
sources : 10 graded stone aggregate 40 mm nominal size derived
from natural sources).
cum 8047.55
 4.2.8A 1:5:10 (1 cement : 5 manufactured sand derived from Recycled
Concrete Aggregate (RCA) : 10 graded stone aggregate 40
mm nominal size Recycled Aggregate (RA))
cum 6437.15
4.3 Centering and shuttering including strutting, propping etc. and removal of form
work for :

4.3.1 Foundations, footings, bases for columns sqm 307.95

4.3.2 Retaining walls, return walls, walls (any thickness) including attached
pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

sqm 669.55
4.3.3 Columns, piers, abutments, pillars, posts and struts sqm 804.25
4.4 Providing and laying cement concrete in kerbs, steps and the like at or near
ground level excluding the cost of centering, shuttering and finishing.

4.4.1 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural

sources : 3 graded stone aggregate 20 mm nominal size derived from natural cum 7783.65
sources)

4.4.1A 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) including

manufactured sand derived from Recycled Concrete Aggregate (RCA) upto
25% : 3 graded stone aggregate 20 mm nominal size Recycled Concrete
Aggregate (RCA) upto 25%)).
cum 7555.05
CEMENT CONCRETE PRECAST
4.5 Providing and fixing up to floor five level precast cement concrete string or
lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers,
steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1
Cement : 3 coarse sand), cost of required Centering complete.

4.5.1 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural

sources : 3 graded stone aggregate 20mm nominal size derived from natural
sources)
cum 9277.75
4.5.1A 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) including
manufactured sand derived from Recycled Concrete Aggregate (RCA) upto
25% : 3 graded stone aggregate 20mm nominal
size Recycled Concrete Aggregate (RCA) upto 25%))
cum 9050.20
4.6 Providing and fixing at or near ground level precast cement concrete in
kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3
(1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete.

4.6.1 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural

sources: 3 graded stone aggregate 20 mm nominal size derived from natural cum 8130.65
sources).

4.6.1A 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) including

manufactured sand derived from Recycled Concrete Aggregate (RCA) upto
25% : 3 graded stone aggregate 20 mm nominal size Recycled Concrete
Aggregate (RCA) upto 25%))
cum 7902.85
4.7 Providing and fixing up to floor five level precast cement concrete solid block,
including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse
sand), cost of required centering, shuttering complete :

4.7.1 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural

sources : 3 graded stone aggregate 20 mm nominal size derived from natural cum 15762.45
sources).

4.7.1A 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) including

manufactured sand derived from Recycled Concrete Aggregate (RCA) upto
25% : 3 graded stone aggregate 20 mm nominal size (Recycled Concrete
Aggregate (RCA) upto 25%)).
cum 15534.65
4.8 Providing and fixing up to floor five level precast cement concrete hollow block,
including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse
sand), cost of required centering, shuttering complete.

4.8.1 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural

sources : 3 graded stone aggregate 20 mm nominal size derived from natural cum 12605.35
sources) .

4.8.1A 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) ncluding

manufactured sand derived from Recycled Concrete Aggregate Recycled
Concrete Aggregate (RCA) upto 25% : 3 graded stone aggregate 20 mm
nominal size (Recycled Concrete Aggregate (RCA) upto 25%)).

cum 12500.20
4.9 Precasting and placing in position 125 mm dia Bollards 600 mm high of
required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the
Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6mm M.S. plate welded
at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand
(zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size
derived from natural sources), including necessary excavation of size 250x250x450mm
deep for the same in bitumen/concrete pavement at specified spacing.

each 785.70
4.9 A Precasting and placing in position 125 mm dia Bollards 600 mm high of
required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long
in the Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6mm
M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6
(1 Cement : 3 manufactured sand derived from Recycled Concrete Aggregate
Recycled Concrete Aggregate (RCA)
: 6 graded stone aggregate 20 mm nominal size (Recycled Concrete
Aggregate (RCA)), including necessary excavation of size
250x250x450mm deep for the same in bitumen/ concrete pavement at
specified spacing each 753.80
4.9 B Precasting and placing in position 125 mm dia Bollards 600 mm high of
required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long
in the Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6mm
M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6
(1 Cement : 3 manufactured sand derived from Recycled Concrete Aggregate
Recycled Concrete Aggregate (RCA)
: 6 graded stone aggregate 20 mm nominal size (Recycled Aggregate (RA),
including necessary excavation of size 250x250x450mm deep

for the same in bitumen/ concrete pavement at specified spacing each 733.00
DAMP-PROOF COURSE
4.10 Providing and laying damp-proof course 40mm thick with cement
concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural
sources : 4 graded stone aggregate 12.5mm nominal size derived from
natural sources) sqm 370.85
4.10A Providing and laying damp-proof course 40mm thick with cement
concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) including
manufactured sand derived from Recycled Concrete Aggregate (RCA) upto
25% : 4 graded stone aggregate 12.5mm nominal size (Recycled
Concrete Aggregate (RCA) upto 25%)) sqm 362.35
4.11 Providing and laying damp-proof course 50mm thick with cement
concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural
sources : 4 graded stone aggregate 20mm nominal size derived from
natural sources). sqm 452.25
4.11A Providing and laying damp-proof course 50mm thick with cement
concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) ncluding
manufactured sand derived from Recycled Concrete Aggregate (RCA) upto
25% : 4 graded stone aggregate 20mm nominal size (Recycled
Concrete Aggregate (RCA) upto 25%)) sqm 440.25
4.12 Extra for providing and mixing water proofing material in cement concrete per 50kg 57.15
work in doses by weight of cement as per manufacturer's specification. cement
4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10
of approved quality using 1.7kg per square metre on damp proof course after
cleaning the surface with brushes and finally with apiece
of cloth lightly soaked in kerosene oil. sqm 113.85
MISCELLANEOUS
4.14 Extra for concrete work in superstructure above floor V level for each
four floors or part thereof. cum 1294.45
4.15 Extra for laying concrete in or under water and/or liquid mud including cum per 905.50
cost of pumping or bailing out water and removing slush etc. complete. metre depth
Note for item No. 4.15 :- The quantity will be calculated by multiplying the
depth measured from the sub-soil water level up to centre of gravity of
concrete under sub-soil water level with quantity of concrete in cum executed
under sub-soil water. The depth of centre of gravity shall be reckoned correct
to 0.1m. 0.05m or more shall be taken as 0.1m and less than 0.05m ignored.

4.16 Extra for laying concrete in or under foul positions. cum 385.25
4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement
: 3 coarse sand (zone-III) derived from natural sources : 6 graded stone
aggregate 20 mm nominal size derived from natural sources) over 75mm thick
bed of dry brick ballast 40 mm nominal size, well rammed and consolidated
and grouted with fine sand, including necessary excavation,
 levelling & dressing & finishing the top smooth. sqm 681.65
4.17A Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement
: 3 manufactured sand derived from Recycled Concrete Aggregate (RCA)
: 6 graded stone aggregate 20 mm nominal size (Recycled Concrete
Aggregate (RCA) over 75mm thick bed of dry brick ballast 40 mm nominal
size, well rammed and consolidated and grouted with fine sand, including
necessary excavation, levelling & dressing & finishing the top smooth

sqm 631.25
4.17B Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement
: 3 manufactured sand derived from Recycled Concrete Aggregate (RCA)
: 6 graded stone aggregate 20 mm nominal size (Recycled Aggregate (RA)
over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed
and consolidated and grouted with fine sand, including
necessary excavation, levelling & dressing & finishing the top smooth sqm 596.60
4.18 Extra for addition of synthetic Polyester triangular fibre of length 12mm, per bag 61.90
effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 of 50kg
in cement concrete/RCC/Flooring/water retaining structures by using of
125gms of synthetic Polyester triangular fibre for 50 Kg cement used cement
as per directions of Engineer-in-Charge.
4.19 DELETED

4.19.1 DELETED
4.19.1.1 DELETED
4.19.1.2 DELETED
4.19.2 DELETED
4.19.2.1 DELETED
4.19.2.2 DELETED

4.20 Providing and laying in position ready mixed or site batched design
mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources,
Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to acce
retard setting

of concrete, to improve durability and workability without impairing strength; including pumping of
concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and
finishing as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable
separately. In case the cement content in design mix is more than 110% of the minimum specified cement
content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
4.20.1 All works upto plinth level :

4.20.1.1 Concrete of M10 grade with minimum cement

content of 220 kg /cum cum 8033.20

4.20.1.2 Concrete of M15 grade with minimum cement content of

240 kg /cum cum 8174.75
 4.20.1.3 Concrete of M20 grade with minimum cement content of
270 kg /cum cum 8387.15

4.20.1.4 Concrete of M25 grade with minimum cement content of

300 kg /cum cum 8599.50

All works above plinth and upto floor V level

4.20.2.1 Concrete of M10 grade with minimum cement content of
220 kg /cum cum 9655.60

4.20.2.2 Concrete of M15 grade with minimum cement content of

240 kg /cum cum 9797.15

4.20.2.3 Concrete of M20 grade with minimum cement content of

270 kg /cum cum 10009.50

4.20.2.4 Concrete of M25 grade with minimum cement content of

300 kg /cum cum 10221.85

4.20.2
4.20A Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement
concrete work; using coarse aggregate and fine aggregate derived from natural sources and using recycled concrete
aggregate (RCA) as coarse aggregate and fine aggregate within the permissible utilization, Portland Pozzolana /
Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /
retard setting of concrete to improve durability and workability without impairing strength; including pumping of
concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as
per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In
case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor
shall have discretion to either re-design the mix or bear the cost of extra cement.

4.20A.1 All works upto plinth level

4.20A.1.1 Concrete of M10 grade with minimum cement content
of 220 kg /cum.
cum 7102.95
(Note: The permissible utilization of Recycled Concrete
Aggregate (RCA) as coarse aggregate and fine
aggregate is 100% each).
4.20A.1.2 Concrete of M15 grade with minimum cement content
of 240 kg /cum. cum 7998.95

(Note: The permissible utilization of Recycled Concrete

Aggregate (RCA) as coarse aggregate and fine
aggregate is 25% each).

4.20A.1.3 Concrete of M20 grade with minimum cement content

of 270 kg /cum.
 (Note: The permissible utilization of Recycled Concrete
Aggregate (RCA) as coarse aggregate and fine
aggregate is 25% each).
cum 8211.30
4.20A.1.4 Concrete of M25 grade with minimum cement content
of 300 kg /cum. cum 8423.65

(Note: The permissible utilization of Recycled Concrete

Aggregate (RCA) as coarse aggregate and fine
aggregate is 25% each).
4.20A.2 All works above plinth and upto floor V level
4.20A.2.1 Concrete of M10 grade with minimum cement content
of 220 kg /cum. cum 8725.35

(Note: The permissible utilization of Recycled Concrete

Aggregate (RCA) as coarse aggregate and fine
aggregate is 100% each).

4.20A.2.2 Concrete of M15 grade with minimum cement content

of 240 kg /cum. cum 9621.30

(Note: The permissible utilization of Recycled Concrete

Aggregate (RCA) as coarse aggregate and fine
aggregate is 25% each).
4.20A.2.3 Concrete of M20 grade with minimum cement content
of 270 kg /cum. cum 9833.70

(Note: The permissible utilization of Recycled Concrete

Aggregate (RCA) as coarse aggregate and fine
aggregate is 25% each).

4.20A.2.4 Concrete of M25 grade with minimum cement content

of 300 kg /cum. cum 10046.05

(Note: The permissible utilization of Recycled Concrete

Aggregate (RCA) as coarse aggregate
and fine aggregate is 25% each).
 SUB HEAD : 5.0
REINFORCED CEMENT
CONCRETE

115
 BASIC RATES (SH: 5.0 REINFORCED CEMENT CONCRETE)
Code Description Unit Rate
No.

0002 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper day 800.00

0004 Production cost of concrete by batch mix plant cum 400.00

0009 Pumping charges of concrete including Hire charges of pump, piping work &
accessories etc. cum 210.00

0011 Hire charges of Pump set of capacity 4000 litres/hour day 700.00
0012 Vibrator (Needle type 40 mm) day 350.00
0025 Hire and running charges of light crane day 3500.00
0026 Hire and running charges of bentonite pump day 3000.00
0029 Carriage of ready mixed concrete by rotatory transit mixer km/cum 37.30
0052 Front end loader 1 cum bucket capacity (incl POL) hour 1300.00
0066 Batching and Mixing Plant @ 75 cum per hour hour 2400.00
0070 Generator 100 KVA/125 KVA hour 300.00
0082 Excavation of Diaphragm wall by Mechanical Grab sqm 1500.00
0101 Bhisti day 714.00
0102 Blacksmith 1st class day 784.00
0103 Blacksmith 2nd class day 714.00
0112 Carpenter 2nd class day 714.00
0114 Beldar day 645.00
0115 Coolie day 645.00
0116 Fitter (grade 1) day 784.00
0123 Mason (brick layer) 1st class day 784.00
0124 Mason (brick layer) 2nd class day 714.00
0126 Mason (for ornamental stone work) 1st class day 784.00
0128 Mate day 714.00
0131 Painter day 714.00
0155* Mason (average) day 749.00
0236 Multi purpose fibre reinforced by organic fibres and/or inorganic synthetic fibres
cement board 6 mm thick sqm 210.00

0242 6 mm thick mulitipurpose cement bonded wood particle board conforming to IS

: 14276 sqm 195.00
0278 Manufactured sand derived from Recycled Concrete Aggregate (RCA)
cum 741.00

0279 Recycled Concrete Aggregate (RCA) 20 mm nominal size cum 957.00

0281 Recycled Concrete Aggregate (RCA) 10 mm nominal size cum 957.00
117
SUB HEAD -5.0 REINFORCED CEMENT CONCRETE
0293 Stone Aggregate (Single size) : 40 mm nominal size cum 1300.00

0295 Stone Aggregate (Single size) : 20 mm nominal size cum 1400.00

0297 Stone Aggregate (Single size) : 10 mm nominal size cum 1350.00
0302 Safeda ballies 125 mm diameter metre 40.00
0309 Paving bitumen of grade VG-10 of approved quality tonne 25614.00
0313 Blown type petroleum bitumen of penetration 85/25 of approved quality
tonne 34790.00

0314 Bitumen hot sealing compound : grade A kg 29.00

0316 Bitumen solution primer of approved quality litre 47.00
0339 Flame retardant face insulating, Impregnated fibre board 12 mm thick sqm 375.00
0349 Curing compound litre 38.00
0367 Portland Cement (OPC-43 Grade) tonne 5000.00
0370 Coal (steam) quintal 440.00
0596 Bright finished or black enameled mild steel butt hinges 75x47x
1.70 mm 10 Nos 56.00

0639 Bright finished or black enameled mild steel screws 25 mm 100 Nos 40.00
0768 Cement Concrete Jali 50 mm thick sqm 400.00
0769 Cement Concrete Jali 40 mm thick sqm 350.00
0770 Cement Concrete Jali 25 mm thick sqm 275.00
0967 Copper plate kg 527.00
0982 Coarse sand (zone III) cum 1500.00
0983 Fine sand (zone IV) cum 900.00
0992 Galvanised steel plain sheets quintal 5000.00
1004 Average rate of Mild steel round bars for reinforcement quintal 4850.00
1005 Twisted steel/ deformed TMT bars Fe-500D quintal 4900.00
1015 Mild steel expanded metal 20x60 mm strands 3.25 mm wide
1.60 mm thick sqm 280.00
1021 Hard drawn steel wire fabric 75 x 25 mm mesh of weight not less
than 7.75 kg/sqm sqm 430.00
1034 Bolts and nuts up to 300 mm in length quintal 5200.00
1197 Second class kail wood in scantling 10 cudm 260.00
1198 Second class kail wood in planks 10 cudm 260.00
1215 Welding by electric plant cm 2.00
1224 Hard drawn steel wire quintal 4800.00
1225 Mild steel flat strap fitting quintal 4120.00
1980 Fly ash cum 11.00

2200 Carriage of Steam coal tonne 187.35

2202 Carriage of Stone aggregate below 40 mm nominal size cum 163.93
2203 Carriage of Coarse sand cum 163.93
2204 Carriage of Timber cum 187.35
2205 Carriage of Steel tonne 145.72
2206 Carriage of Stone aggregate 40 mm nominal size and above cum 178.19
2209 Carriage of Cement tonne 145.72
2211 Carriage of Tar / Bitumen tonne 163.93
2261 Carriage of Fine sand (1 part of badarpur sand: 2 parts jamuna sand) cum 163.93
2262 Carriage of Flyash cum 163.93
2273 Carriage of A.C.sheet and accessories tonne 145.72
2302 Carriage of G.I. sheet and accessories tonne 145.72
2391 Strips-Aluminium fluted 3.15 mm thick and 150 mm wide metre 286.00
2392 Strips Aluminium fluted 3.15 mm thick and 200 mm wide metre 381.00
2393 1 mm thick Stainless Steel Cover plate grade 304 kg 286.00
2394 Coupler 16 mm dia each 31.00
2395 Coupler 20 mm dia each 41.00
2396 Coupler 25 mm dia each 72.00
2397 Coupler 28 mm dia each 83.00
2398 Coupler 32 mm dia each 114.00
2399 Complete Roof Joint of 100 mm metre 2912.00
2400 Complete Roof Joint of 150 mm metre 3328.00
2401 Complete Roof Joint of 200 mm metre 4160.00
2402 Epoxy adhesive kg 156.00
2403 Floor Joint of 100 mm metre 3193.00
2404 Floor Joint of 150 mm metre 4120.00
2405 Floor Joint of 200 mm metre 5562.00
2409 Wall Joint of 100 mm metre 2472.00
2410 Wall Joint of 150 mm metre 2884.00
2411 Wall Joint of 200 mm metre 3468.00
2447 Hollock ballies 125 mm diameter metre 36.00
7183 Bentonite of 35 kg per pile tonne 2800.00
7318 Plasticizer / super plasticizer kg 29.00
7319 Wall form panel 1250x500 mm each 860.00
7320 Tie bolt 12 mm dia 100 mm length each 38.00
7321 Tie bolt 12 mm dia 150 mm length each 48.00
7322 Tie bolt 20 mm dia 150 mm length each 57.00
7323 Tie bolt 20 mm dia 225 mm length each 67.00
7324 Spring coil 12 mm each 15.00
7325 Plastic cone 12 mm dia each 15.00
7326 Corner angle 45x45x5 mm 1.50 m long each 240.00
7327 100 mm channel shoulder 2.5 m long each 910.00
7328 Double clip (bridge clip) each 76.00
7329 Single clip each 59.00
7330 M.S. tube 40 mm dia metre 215.00
7331 Wall form panel 1250x450 mm each 860.00
7332 Corner angle 45x45x5 mm 2.50 m long each 255.00
7333 Column clamp 450x1070 mm each 965.00
7334 Prop 2 m ( 2-3.5 m) each 635.00
7345 Prop 4 m each 910.00
7346 Double coupler each 46.00
8647 Stainless steel screws 30 mm x4 mm 100 Nos 35.84
8659 Water proof ply 12 mm thick sqm 525.00
8953 Micro Silica kg 28.00
8954 Stop end tubes for diaphragmwall 600 mm dia. sqm 4.50
8955 Driving end tubes for diaphragm wall 600 mm dia. sqm 72.00
9977 Carriage L.S. 2.12
9988 Carriage and sundries L.S. 2.12
9999 Sundries L.S. 2.12

5.0 REINFORCED CEMENT CONCRETE

Code Description Unit Rate
No.

CAST IN SITU
5.1 Providing and laying in position specified grade of reinforced cement concrete,
excluding the cost of centering, shuttering, finishing and reinforcement -
All work up to plinth level :
5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural
sources : 3 graded stone aggregate 20 mm nominal size de rived from natural
sources)
cum 8364.20
5.1.2A 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) incuding manu- factured
sand derived from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded
stone aggregate 20 mm nominal size of Recycled Concrete Aggregate (RCA)
upto 20%.
cum 8180.85
5.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural
sources : 4 graded stone aggregate 20 mm nominal size de rived from natural
sources)
cum 7945.65
5.1.3A 1:2:4 (1 cement : 2 coarse sand incuding manufactured sand derived
from Recycled Concrete Aggregate (RCA) upto 20% : 4 graded stone
aggregate 20 mm nominal size of Recycled Con crete Aggregate (RCA) upto
20%).
cum 7752.70
5.2 Reinforced cement concrete work in walls (any thickness), including attached
pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,
abutments, posts and struts etc. above plinth level up to floor five level,
excluding cost of centering, shuttering, finishing and reinforcement :

5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu-

ral sources : 3 graded stone aggregate 20 mm nominal size derived from
natural sources)
cum 10185.05
5.2.2A 1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand
derived from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded stone
aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto
20%
cum 10001.70
5.3 Reinforced cement concrete work in beams, suspended floors, roofs having
slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain
window sills, staircases and spiral stair cases above plinth level up to floor five
level, excluding the cost of centering, shuttering, finishing and reinforcement
with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural
sources : 3 graded stone aggregate 20 mm nominal size derived from natural
sources).
cum 10719.30
5.3A Reinforced cement concrete work in beams, suspended floors, roofs having
slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain
window sills, staircases and spiral staircases above plinth level up to floor five
level excluding the cost of centering, shuttering, finishing and reinforcement,
with 1:1.5:3 (1 cement : 1.5 coarse sand
incuding manufactured sand derived from Recycled Concrete Aggregate
(RCA) upto 20%: 3 graded stone aggregate 20 mm nominal size
Recycled Concrete Aggregate (RCA) upto 20%) cum 10536.00
5.4 Providing and laying up to floor five level reinforced cement concrete in kerbs,
steps and the like excluding the cost of centering, shuttering, finishing and
reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from
natural sources : 3 graded stone aggregate 20 mm nominal size derived from
natural sources).
cum 9801.75
5.4A Providing and laying up to floor five level reinforced cement concrete in kerbs,
steps and the like excluding the cost of centering, shuttering, finishing and
reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured
sand derived from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded
stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA)
upto 20%).
cum 9618.45
5.5 Reinforced cement concrete work in arches, archribs, domes, vaults, shells,
folded plate and roofs having slope more than 15° up to floor five level,
excluding the cost of centering, shuttering, finishing and reinforcement
with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural
sources : 3 graded stone aggregate 20 mm nominal size derived from natural
sources).
cum 11291.20
5.5A Reinforced cement concrete work in arches, archribs, domes, vaults, shells,
folded plate and roofs having slope more than 15° up to floor five level
excluding the cost of centering, shuttering, finishing and reinforcement
with 1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand
derived from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded stone
aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto
20%).
cum 11107.85
5.6 Reinforced cement concrete work in chimneys, shafts, up to floor five level,
excluding the cost of centering, shuttering, finishing and reinforcement
with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural
sources : 3 graded stone aggregate 20 mm nominal size derived from natural
sources).
cum 10409.40
5.6A Reinforced cement concrete work in chimneys, shafts, up to floor five level
excluding the cost of centering, shuttering, finishing and reinforcement
with 1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand
derived from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded stone
aggregate 20 mm nominal size (Recycled Concrete Aggregate (RCA) upto
20%).
cum 10226.05
5.7 Reinforced cement concrete work in well-steining, excluding the cost of
centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement
: 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone
aggregate 20 mm nominal size derived from natural sources).
cum 7852.70
5.7A Reinforced cement concrete work in well-steining excluding the cost of
centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement
: 1.5 coarse sand incuding manufactured sand derived from Recycled
Concrete Aggregate (RCA) upto 20% : 3 graded stone aggregate 20
mm nominal size Recycled Concrete Aggregate (RCA) upto 20%).
cum 7669.40
5.8 Reinforced cement concrete work in vertical and horizontal fins individually
or forming box louvers, facias and eaves boards above plinth level up to floor
five level, excluding the cost of centering, shuttering, finishing and
reinforcement with 1:1½:3 (1 cement : 1½ coarse sand(zone-III) derived from
natural sources : 3 graded stone aggregate 20mm nominal size derived from
natural sources).
cum 9297.70
5.8A Reinforced cement concrete work in vertical and horizontal fins individually or
forming box louvers, facias and eaves boards above plinth level up to floor
five level excluding the cost of centering, shuttering, finishing and
reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand incuding
manufactured sand derived from Recycled Concrete Aggregate (RCA) upto
20% : 3 graded stone aggregate 20 mm nominal size Recycled Concrete
Aggregate (RCA) upto 20%).
cum 9114.35
FORM WORK
5.9 Centering and shuttering including strutting, propping etc. and removal of
form for
5.9.1 Foundations, footings, bases of columns, etc. for mass concrete
sqm 307.95

5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth

and string courses etc. sqm 669.55

5.9.3 Suspended floors, roofs, landings, balconies and access platform

sqm 766.55

5.9.4 Shelves (Cast in situ) sqm 766.55

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers
sqm 608.35

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm 804.25
5.9.7 Stairs, (excluding landings) except spiral-staircases sqm 657.75
5.9.8 Spiral staircases (including landing) sqm 652.80
5.9.9 Arches, domes, vaults up to 6 m span sqm 1826.25
5.9.10 Extra for arches, domes, vaults exceeding 6 m span sqm 575.25
5.9.11 Chimneys and shafts sqm 669.55
5.9.12 Well steining sqm 246.40
5.9.13 Vertical and horizontal fins individually or forming box louvers band,
facias and eaves boards sqm 1100.40

5.9.14 Extra for shuttering in circular work (20% of respective centering and
shuttering items) sqm

5.9.15 Small lintels not exceeding 1.5 m clear span, moulding as in cornices,
window sills, string courses, bands, copings, bed plates, anchor blocks and
the like
sqm 307.95
5.9.16 Edges of slabs and breaks in floors and walls
5.9.16.1 Under 20 cm wide metre 181.90
5.9.16.2 Above 20 cm wide sqm 772.10
 5.9.17 Cornices and mouldings sqm 769.30
5.9.18 Small surfaces such as cantilever ends, brackets and ends of steps,
caps and bases to pilasters and columns and the
like sqm 827.15
5.9.19 Weather shade, Chajjas, corbels etc., including edges sqm 814.95
5.9.20 Suspended floors, roofs, landings, balconies and access platform with
water proof ply 12 mm thick sqm 853.75

5.9.21 Lintels, beams, plinth beams, girders, bressumers and cantilevers with
water proof ply 12 mm thick sqm 699.45

5.10 Providing and fixing tie bolt, spring coil and plastic cone in wall shuttering
complete as per the direction of Engineer-in-charge.
5.10.1 12 mm dia. & 100 mm length each set 135.75
5.10.2 12 mm dia. & 150 mm length each set 149.10
5.10.3 20 mm dia. & 150 mm length each set 161.15
5.10.4 20 mm dia.& 225 mm length each set 174.55
5.11 Extra for additional height in centering, shuttering where ever required with
adequate bracing, propping etc., including cost of de-shuttering and
decentering at all levels, over a height of 3.5 m, for every additional height of
1 metre or part thereof (Plan area to be measured).

5.11.1 Suspended floors, roofs, landing, beams and balconies (Plan area to
be measured) sqm 319.25

PRE-CAST RCC
5.12 Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete work in string courses, bands, copings, bed
plates, anchor blocks, plain window sills and the like, including the cost of
required centering, shuttering but , excluding cost of reinforcement with
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources :
3 graded stone aggregate 20 mm nominal size derived from natural sources).

cum 9673.50
5.12A Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete work in string courses, bands, copings, bed
plates, anchor blocks, plain window sills and the like, including the cost of
required centering, shuttering but excluding cost of reinforcement, with
1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand derived
from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded stone
aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto
20%).

cum 9491.20
5.13 Providing, hoisting and fixing up to floor five level precast reinforced cement
concrete in small lintels not exceeding 1.5m clear span up to floor five level,
including the cost of required centering, shuttering but , excluding the cost of
reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from
natural sources : 3 graded stone aggregate 20
mm nominal size derived from natural sources).
cum 13581.85
5.13A Providing, hoisting and fixing up to floor five level precast reinforced cement
concrete in small lintels not exceeding 1.5 m clear span up to floor five level,
including the cost of required centering, shuttering but excluding the cost of
reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand incuding
manufactured sand derived from Recycled Concrete Aggregate (RCA) upto
20% : 3 graded stone aggregate 20 mm nominal size Recycled Concrete
Aggregate (RCA) upto 20%).
cum 13398.50
5.14 Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete in mouldings as in cornices, windows sills etc,
including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of
required centering, shuttering but, excluding the cost of reinforcement,
with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural
sources : 3 graded stone aggregate 20 mm nominal size derived from natural
sources).

cum 15777.40
5.14A Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete in mouldings as in cornices, windows sills etc.
including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of
required centering, shuttering but excluding the cost of reinforcement,
with 1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand
derived from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded stone
aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto
20%).

cum 15594.10
5.15 Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete in lintels, beams and bressumers, including
setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required
centering and shuttering but , excluding the cost of reinforcement, with 1:1.5:3
(1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded
stone aggregate 20 mm nominal size derived from natural sources)

cum 12321.25
5.15A Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete in lintels, beams and bressumers including setting
in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering
and shuttering but excluding the cost of reinforcement with, 1:1.5:3 (1
cement : 1.5 coarse sand incuding manufactured sand derived from Recycled
Concrete Aggregate (RCA) upto 20% : 3 graded stone aggregate 20 mm
nominal size Recycled Concrete Aggregate (RCA) upto 20%).

cum 12137.95
5.16 Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete in shelves, including setting in cement mortar 1:3
(1cement : 3 coarse sand), cost of required centering, shuttering and finishing
with neat cement punning on exposed surfaces but , excluding the cost of
reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from
natural sources : 3 graded stone aggregate
20 mm nominal size derived from natural sources).

cum 18644.60
5.16A Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete in shelves including setting in cement mortar 1:3
(1 cement : 3 coarse sand), cost of required centering, shuttering and finishing
with neat cement punning on exposed surfaces but excluding the cost of
reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand incuding
manufactured sand derived from Recycled Concrete Aggregate (RCA) upto
20% : 3 graded stone aggregate 20 mm nominal size Recycled Concrete
Aggregate (RCA) upto 20%).

cum 18461.30
5.17 Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete in vertical & horizontal fins, individually or forming
box louvers, setting in cement mortar 1:2 (1 cement : 2 coarse sand),
including the cost of required centering, shuttering but , excluding the cost of
reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone- III) derived from
natural sources : 3 graded stone aggregate 20 mm nominal size derived from
natural sources).
cum 10817.10
5.17A Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete in vertical & horizontal fins individually or forming
box louvers setting in cement mortar 1:2 (1 cement : 2 coarse sand), including
the cost of required centering, shuttering but excluding the cost of
reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand incuding
manufactured sand derived from Recycled Concrete Aggregate (RCA) upto
20% : 3 graded stone aggregate 20 mm nominal size Recycled Concrete
Aggregate (RCA) upto 20%).

cum 10633.80
5.18 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-
III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia
mild steel wire, including centering and shuttering, roughening cleaning, fixing
and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete,
excluding plastering of the jambs, sills and soffits.

5.18.1 50 mm thick sqm 1580.90

5.18.2 40 mm thick sqm 1430.30
5.18.3 25 mm thick sqm 1291.45
ENCASING ROLLED STEEL SECTION
5.19 Encasing rolled steel sections, in beams and columns, with cement concrete
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3
graded stone aggregate 20 mm nominal size derived from natural sources)
including centering and shuttering complete but , excluding cost of
reinforcement.
cum 14191.95
5.19A Encasing rolled steel sections, in beams and columns, with cement concrete
1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand derived from
Recycled Concrete Aggregate (RCA) upto 20%: 3 graded stone aggregate
20 mm nominal size Recycled Concrete Aggregate (RCA) upto 20%)
including centering and shuttering complete
but excluding cost of reinforcement.
cum 14008.65
5.20 Encasing rolled steel section in grillages with cement concrete 1:1.5:3
(1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded
stone aggregate 20 mm nominal size derived from natural sources) including
centering and shuttering but, excluding cost of expanded metal and hangers.

cum 8874.65
5.20A Encasing rolled steel section in grillages with cement concrete 1:1.5:3 (1
cement : 1.5 coarse sand incuding manufactured sand derived from Recycled
Concrete Aggregate (RCA) upto 20% : 3 graded stone aggregate 20 mm
nominal size Recycled Concrete Aggregate (RCA) upto 20%), including
centering and shuttering but excluding cost of expanded metal and hangers.

cum 8691.35
5.21 Extra for providing and fixing expanded metal mesh of size 20x60 mm and
strands 3.25 mm wide 1.6 mm thick weighing 3.64 kg per sqm for encasing of
rolled steel sections in beams, columns and grillages, excluding cost of
hangers.
sqm 448.80
STEEL REINFORCEMENT
5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete upto plinth level.
5.22.1 Mild steel and Medium Tensile steel bars kg 88.95
5.22.2 Hard drawn steel wire kg 87.50
5.22.3 Cold twisted bars kg 89.65
5.22.4 Hot rolled deformed bars kg 89.65
5.22.5 Hard drawn steel wire fabric kg 94.10
5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 89.65
5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete above plinth level.
5.22A.1 Mild steel and Medium Tensile steel bars kg 88.95
5.22A.2 Hard drawn steel wire kg 87.50
5.22A.3 Cold twisted bars kg 89.65
5.22A.4 Hot rolled deformed bars kg 89.65
5.22A.5 Hard drawn steel wire fabric kg 94.10
5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 89.65
5.22B Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of
approved make from factory/workshop to construction site including placing in
position and binding all complete upto plinth level.
5.22B.1 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 83.15
5.22C Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of
approved make from factory/workshop to construction site including placing in
position and binding all complete above plinth level.
5.22C.1 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 83.15
MISCELLANEOUS
5.23 Smooth finishing of the exposed surface of R.C.C. work with 6 mm
thick cement mortar 1:3 (1 Cement : 3 fine sand). sqm 253.05
5.24 Extra for rendering smooth the top of suspended floors, landings and
staircases (treads and risers) with cement mortar 1:2 (1 cement : 2
coarse sand), including a floating coat of neat cement and protecting
the surface with a layer of 7.5 cm of earth laid over 15 mm of fine sand
in case of suspended floor and bricks laid in mud mortar in case of
landings and steps, including subsequent removal and cleaning of the
same. sqm 133.90
5.25 Providing and fixing in position copper plate as per design for expansion
joints. kg 729.40
5.26 Providing and filling in position, blown bitumen in expansion joints. cum 63877.35
5.27 Providing and filling in position bitumen mix filler of proportion 80 kg. of
hot bitumen, 1 kg. of cement and 0.25 cubic metre of coarse sand for
expansion joints. cum 22400.50
5.28 Providing and fixing in position 12mm thick bitumen impregnated per cm 567.25
fiber board conforming to IS: 1838, including cost of primer, sealing depth per
compound Grade-A in expansion joints. 100m
5.29 Providing and fixing sheet covering over expansion joints with iron screws as per design.

5.29.1 Non-asbestos fibre cement board 6 mm thick as per IS: 14862.

5.29.1.1 150mm wide metre 203.65
5.29.1.2 200mm wide metre 273.95
5.29.2 Aluminium fluted strips 3.15 mm thick.
5.29.2.1 150 mm wide metre 515.80
5.29.2.2 200 mm wide metre 685.10
5.29.3 Cement bonded wood particle board 6mm thick as per
IS : 14276
5.29.3.1 150 mm wide metre 200.50
5.29.3.2 200 mm wide metre 269.75
5.30 Add for plaster drip course/ groove in plastered surface or moulding to
R.C.C. projections. metre 64.70
5.31 Extra for laying reinforced cement concrete in or under water and/ or
liquid mud, including cost of pumping or bailing out water and removing
slush etc., complete. cum 905.50
Note For Item No. 5.31:- The quantity will be calculated by multiplying
the depth measured from the subsoil water level up to the centre of
gravity of the R.C.C. under subsoil water with the quantity of R.C.C. in
cubic metre executed under subsoil water. The depth of centre of gravity
shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as
 0.1 m and less than 0.05 m ignored. No extra payment shall be made
for placing reinforcement or centering & shuttering under sub - soil water
conditions.
5.32 Extra for laying reinforced cement concrete in or under foul positions. cum 385.25
DESIGN MIX CONCRETE
5.33 Providing and laying in position ready mixed or site batched design mix
cement concrete for reinforced cement concrete work; using coarse aggregate and fine
aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland
Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /
retard setting of concrete, to improve durability and workability without impairing strength;
including pumping of concrete to site of laying, curing, carriage for all leads; but excluding
the cost of centering, shuttering, finishing and reinforcement as per direction of the
engineer-in-charge; for the following grades of concrete.

Note: Extra cement up to 10% of the minimum specified cement content in

design mix shall be payable separately. In case the cement content in design
mix is more than 110% of the specified minimum cement content, the
contractor shall have discretion to either re-design the mix or bear the cost of
extra cement.

5.33.1 All works upto plinth level

5.33.1.1 Concrete of M25 grade with minimum cement content of
330 kg /cum cum 7997.30

5.33.1.2 Concrete of M30 grade with minimum cement content of

350 kg /cum cum 8599.35

5.33.1.3 Concrete of M35 grade with minimum cement content of

370 kg /cum cum 8740.90

5.33.1.4 Concrete of M40 grade with minimum cement content of

390 kg/cum cum 8882.45

5.33.1.5 Concrete of M50 grade with minimum cement content of

410 kg/cum cum 9024.05

5.33.2 All works above plinth level upto floor V level

5.33.2.1 Concrete of M25 grade with minimum cement content of
330 kg /cum cum 10080.15

5.33.2.2 Concrete of M30 grade with minimum cement content of

350 kg /cum cum 10221.70

5.33.2.3 Concrete of M35 grade with minimum cement content of

370 kg /cum cum 10363.30

5.33.2.4 Concrete of M40 grade with minimum cement content of

390 kg /cum cum 10504.85

5.33.2.5 Concrete of M50 grade with minimum cement content of

410 kg /cum cum 10646.45
5.33A Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement conc
work; using coarse aggregate and fine aggregate derived from natural sources and using recycled concrete aggregate (RCA
coarse aggregate and fine aggregate within permissible utilization of 20% each, Portland Pozzolana
/Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting
concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing
carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the enginee
charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case th
cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion
either re-design the mix or bear the cost of extra cement.
5.33A.1 All works upto plinth level
5.33A.1.1 Concrete of M25 grade with minimum cement
content of 330 kg /cum cum 8320.05
5.33A.2 All works above plinth level up to floor V level
5.33A.2.1 Concrete of M25 grade with minimum cement
content of 330 kg /cum cum 9263.15

5.34 DELETED

5.34.1 DELETED
5.34.2 DELETED
5.34.3 DELETED
5.35 Add for using extra cement in the items of design mix over and above the
specified cement content therein. quintal 688.45

5.36 Providing and placing in position precast reinforced cement concrete waffle
units, square or rectangular, as per design and shape for floors and roofs in
1:1½:3 (1 Cement : 1½ coarse sand (zone-III) derived from natural sources :
3 graded stone aggregate 10 mm nominal size derived from natural sources),
including flush or deep ruled pointing at joints in Cement mortar 1:2 (1
Cement : 2 Fine sand), making necessary holes of required sizes for carrying
through service lines etc., providing steel hooks for lifting etc, form work in
precasting, handling, hoisting, centering and erection complete for all floor
levels but, excluding the cost of reinforcement.

cum 27763.65
5.36A Providing and placing in position precast reinforced cement concrete waffle
units, square or rectangular as per design and shape for floors and roofs in
1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand derived
from Recycled Concrete Aggregate (RCA) upto 20% : 3
graded stone aggregate 10 mm nominal size Recycled Concrete
Aggregate (RCA) upto 20%), including flush or deep ruled pointing at joints in cement mortar 1:2 (1 cement : 2 Fine sand), mak
necessary holes of required sizes for carrying through service lines etc., providing steel hooks for lifting etc, form work in precas
handling, hoisting, centering and erection complete for all floor levels but excluding the
cost of reinforcement. cum 27580.30
5.37 DELETED
5.37.1 DELETED
5.37.2 DELETED
5.38 Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four
floors or part thereof. cum 280.95
5.40 DELETED

5.40.1 DELETED
5.40.2 DELETED
5.41 Supplying and applying pre tested and approved water based concrete curing
compound to concrete/ masonry surface, all as per manufacturer’s specification and
direction of Engineer-in-charge.

5.41.1 Non pigmented wet curing compound sqm 57.50

5.42 Providing and fixing parallel threaded couplers conforming to IS code on
“Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement -
Specification”, to reinforcement bars including threading, enlargement at connection by
forging, protecting the prepared reinforcement bars and related operations as required
to complete the works per direction of Engineer- in-Charge.

5.42.1 Coupler for 16 mm diameter reinforcement bar each 102.55

5.42.2 Coupler for 20 mm diameter reinforcement bar each 143.00
5.42.3 Coupler for 25 mm diameter reinforcement bar each 204.95
5.42.4 Coupler for 28 mm diameter reinforcement bar each 239.85
5.42.5 Coupler for 32 mm diameter reinforcement bar each 288.80
5.43 Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick
as per design for expansion joints.
5.43.1 200 mm wide. metre 747.25
5.43.2 300 mm wide. metre 1053.40
5.44 Providing and fixing of expansion joint system related with floor location as per
drawings and direction of Engineer-In-Charge. The joints system will be of extruded
aluminum base members, self aligning / self centering arrangement and support plates
etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to
wall expansion control system for various vertical localtion in load application areas
that accommodates multi directional seismic movement without stress to
it's components. System shall consist of metal profiles with a universal

aluminum base member designed to accommodate various project conditions and finish floor treatments. The cove
shall be designed of width and thickness required to satisfy projects movement and loading requirements and secu
base members by utilizing manufacturer’s pre-engineered self- centering arrangement that freely rotates / moves in
directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresp
aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacemen
Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as
manufactures design and as approved by Engineer -in- Charge. (Material shall confirm to ASTM 6063).

5.44.1 Floor Joint of 100 mm gap metre 5800.15

5.44.2 Floor Joint of 150 mm gap metre 7092.60
5.44.3 Floor Joint of 200 mm gap metre 9074.10
5.45 Providing and fixing of expansion joint system related with wall joint
(internal/external) location as per drawings and direction of Engineer-In- Charge. The
joints shall be of extruded aluminum base members, self aligning / centering arrangement
and support plates as per ASTM B221-
02. The material shall be such that it provides an Expansion Joints System suitable for
vertical wall to wall/ wall to corner application, both new and existing construction in office
Buildings & complexes with no slipping down tendency amongst the components of the
Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting
minimal exposed aluminum surfaces mechanically snap locking the multicellular to
facilitate movement. (Material shall confirm to ASTM 6063).

5.45.1 Wall Joint of 100 mm gap metre 4835.50

5.45.2 Wall Joint of 150 mm gap metre 5438.90
5.45.3 Wall Joint of 200 mm gap metre 6272.45
5.46 Providing and fixing of expansion joint system of approved make and
manufactures for various roof locations as per approved drawings and direction of
Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self
aligning and self centering arragement support plates asper ASTM B221-02. The system
shall be such that it provides watertight roof to roof/roof to corner joint cover expansion
control system that is capable of accommodating multidirectional seismic movement
without stress to its components. System shall consist of metal profile that incorporates a
universal aluminum base member designed to accommodate various project
conditions and roof treatments. The cover plate shall be designed of width and
thickness required to satisfy movement and loading requirements and secured to base
members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely
rotates / moves in all directions. The Self centering arrangement shall exhibit circular
sphere ends that lock and slide inside the
corresponding aluminum extrusion cavity to allow freedom of movement

and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration f
impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personne
Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Ma
shall confirm to ASTM 6063).
5.46.1 Roof Joint of 100 mm gap metre 5424.20
5.46.2 Roof Joint of 150 mm gap metre 6032.95
5.46.3 Roof Joint of 200 mm gap metre 7198.30
5.47 Providing and fixing in position factory made precast RCC M-40 fixing with hold
fast embedded in 1:3:6 concrete block for doors and windows frames having excellent
smooth finish as per IS: 6523 with reinforcement of 3 Nos, 6 mm dia main bars tied with 3
mm M.S stirrups placed @ 200 mm C/C and 6 numbers high strength polymer blocks of
required size for fixing hinges including providing 6 no specially designed M.S. galvanised
sleeves for accomodating 6 mm dia fully threaded bolts for fixing hold fast on vertical
members, providing suitable arrangement for recieving sliding door bolts and tower bolt
etc. all complete, as per the direction of Engineer-in-charge. The frame shall be measured
in running metre correct to two places of decimal.

5.47.1 Door frame 125 mmx 60 mm metre 727.15

5.47.2 Door frame 100 mmx 60 mm metre 1383.20
5.47.3 Door frame 85 mmx60 mm metre 3141.40
5.48 Providing and laying Reinforced cement concrete for construction of piers,
abutments, portal frames, pier caps and bearing pedestals and seismic arresters over
pier/ abutment caps at all locations with specified grade using Ordinary Portland
Cement (conforming to strength requirement of IS:8112) including the cost of steel
centering and shuttering etc. complete, including testing of materials etc. for casting pier
& pier cap in one/two stage, necessary tools, plants, machinery and all related operations
as required to complete the work as per drawings and Specifications with all leads, lifts
and depths true to level and position but excluding the cost of providing
reinforcement. Reinforcement shall be measured and paid separately.

Note:- Cement content considered in this item is 480 Kg./ Cum. Excess/ less
cement used as per design mix is payable/ recoverable separately.
5.48.1 Reinforced Cement Concrete -M-50 cum 7734.60
5.48.2 Reinforced Cement Concrete -M-60 cum 8807.25
5.48.3 Extra for using M-50/ M-60 Grade Self-compacting Cement Concrete
cum 676.50

5.49 Constructing cast-in situ RCC diaphragm wall by providing and laying machine
batched, machine mixed, self compacting, ready mix reinforced cement concrete, tramie
controlled, of M 30 grade using minimum 400 kg. cement per cum of concrete including
providing and mixing required

admixtures in recommended proportions as per IS : 9103, as approved by the Engineer-in-charge, for achieving 150-
200mm slump, for diaphragm wall having thickness as per approved structural design not exceeding 600 mm, in
pannels of required depth and lengths as per approved drawing, including constructing necessary guide walls as
required and as specified including boring in all kinds of soils and rocks, including working in or under water and / or
liquid mud, in foul conditions and pumping or bailing out of water and removing slush, including disposal of earth/ rock /
slush etc. for all leads and all lifts, including preparing, providing and re-circulating bentonite slurry in the trench as and
when required for all depths, including agitating bentonite slurry during trenching etc., providing and fixing stop ends or
form tubes, upto the required depth of diaphragm wall including extracting the same after casting, including chipping off
the bentonite adulterated concrete or unsound concrete up to the cut off level for obtaining the sound concrete, dressing
undulations on the exposed face of diaphragm wall after excavation by chipping / chiseling etc. including filling the
depression/ cavities with sound concrete etc. complete and as directed by the Engineer-in-charge, including providing
recess for bearing plates and fixing insert boxes for inclined rock anchors etc. complete as per the specifications
and approved design and as directed by the Engineer-in-charge, but excluding
the cost of reinforcement and inserts. cum 17310.65
 SUB HEAD : 6.0
MASONRY WORK

135
 BASIC RATES (SH: 6.0 MASONRY WORK)
Code Description Unit Rate
No.

0011 Hire charges of Pump set of capacity 4000 litres/hour day 700.00

0037 Mobile crane day 4500.00

0100 Bandhani day 714.00

0101 Bhisti day 714.00

0102 Blacksmith 1st class day 784.00

0114 Beldar day 645.00

0115 Coolie day 645.00

0123 Mason (brick layer) 1st class day 784.00

0124 Mason (brick layer) 2nd class day 714.00

0155* Mason (average) day 749.00

0322 Bitumen felt :Type 3 grade 1 sqm 70.00

0357 Polymer modified adhesive mortar kg 14.00

1002 Mild steel round bar 12 mm dia and below quintal 4850.00

1008 Flats up to 10 mm in thickness quintal 4850.00

1034 Bolts and nuts up to 300 mm in length quintal 5200.00

1197 Second class kail wood in scantling 10 cudm 260.00

1225 Mild steel flat strap fitting quintal 4120.00

1235 Diesel litre 80.87

1984 Common burnt clay F.P.S. bricks tile class designation 10 1000 Nos 4600.00

1986 Common burnt clay modular bricks class designation 12.5 1000 Nos 5200.00

2201 Carriage of Bricks 1000 Nos 437.15

2204 Carriage of Timber cum 187.35

2205 Carriage of Steel tonne 145.72

2207 Carriage of Brick tiles 1000 Nos 262.29

2208 Carriage of Lime cum 163.93

2302 Carriage of G.I. sheet and accessories tonne 145.72

2602 Common burnt clay F.P.S. (non modular) bricks class designation 7.5 1000 Nos 4590.00

7008 F.P.S. (non modular) clay fly ash bricks class designation 7.5 1000 Nos 4500.00

7736 Extruded burnt flyash clay sewer bricks conforming to I.S 4885 1000 Nos 5000.00
Code Description Unit Rate
No.
7737 Fly ash bricks conforming to I.S. 12894 1000 Nos 3950.00

7738 Calcium Silicate Bricks machine moulded conforming to I.S. 4139 1000 Nos 5050.00

7900 Modular common burnt clay bricks of class designation 7.5 1000 Nos 3800.00

7901 Machine moulded perforated common burnt clay FPS (non modular) bricks of
class designation 12.5 1000 Nos 4200.00

7902 Machine moulded common burnt clay modular perforated bricks of class
designation 12.5 1000 Nos 4800.00

7903 Machine moulded common burnt clay FPS (non modular) bricks of class
designation 12.5 1000 Nos 4700.00

7904 Machine moulded common burnt clay tile bricks of class designation 12.5
1000 Nos 4600.00

8655 Autoclaved aerated cement (AAC) blocks cum 2650.00

8656 Gypsum panel 666 X 500 X 100 mm size sqm 480.00

8657 Bonding plaster for Gypsum panel kg 25.50

9999 Sundries L.S. 2.12

6.0 MASONRY WORK

Code Description Unit Rate

No.

6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in foundation and plinth in:

6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 6882.00
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 6658.25
6.2 Brick work with common burnt clay modular bricks of class designation
7.5 in foundation and plinth in:
6.2.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 5746.80
6.2.2 Cement Mortar 1:6 (1 cement : 6 coarse sand). cum 5549.95
6.3 Brick work with common burnt clay machine moulded perforated bricks
of class designation 12.5 conforming to IS: 2222 in superstructure above
plinth level up to floor five level in cement mortar 1:6 (1 cement : 6
coarse sand) :
6.3.1 With F.P.S.(non modular) bricks cum 8030.60
 6.3.2 With Modular bricks cum 7814.65
6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level up to floor V level in
all shapes and sizes in :
6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 8512.10
6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 8288.35
6.5 Extra for brick work / AAC block masonry / Tile brick masonry in
superstructure above floor V level, for each four floors or part thereof by
mechanical means. cum 142.00
6.6 Extra for forming cavity 5 cm to 11.5 cm wide in cavity walls with
necessary weep and vent holes including use of cores and cost of
providing and fixing bitumastic coated M .S. ties 300 mm long of 25x3
mm section at not less than 3 ties per sqm as per approved design. sqm 193.80
6.7 Providing half brick masonry with common burnt clay F.P.S. (non modular)
bricks of class designation 7.5 in cement mortar 1:3 (1 Cement : 3
coarse sand) in superstructure for closing cavity 5 to 7.5 cm wide in
cavity wall complete with 10cm / 11.4 cm wide bitumen felt type 3
grade 1. metre 273.45
6.8 Brick work 7 cm thick with common burnt clay F.P.S. (non modular)
brick of class designation 7.5 in cement mortar 1:3 (1 cement : 3
coarse sand) in superstructure above plinth level and upto floor five
level. sqm 819.15
6.9 Brick work in plain arches in superstructure above plinth level and upto
floor five level including centering and shuttering complete for span up
to 6 metres with common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand). cum 13378.10
6.10 Brick work in gauged arches in superstructure above plinth level and
upto floor five level in cement mortar 1:3 (1 cement : 3 coarse sand) including centering
and shuttering complete, for span up to 6 meters with common burnt clay F.P.S. (non
modular) bricks of class designation
7.5. cum
6.11 Extra for additional cost of centering for arches exceeding 6m span including
all shuttering, bolting, wedging and removal (Area of the soffit
to be measured). sqm
HALF BRICK MASONRY
6.12 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 in foundations and plinth in :
6.12.1 Cement mortar 1:3 (1 cement : 3 coarse sand) sqm
6.12.2 cement mortar 1:4 (1 cement : 4 coarse sand) sqm
6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 in superstructure above plinth level up to floor V level.

6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand) sqm

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) sqm
6.14 Extra for half brick masonry in superstructure, above floor V level for
every four floors or part thereof by mechanical means. sqm
6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars
at every third course of half brick masonry. sqm 86.45
BRICK TILE WORK
6.16 Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of
class designation 10 in foundation and plinth in:
6.16.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 10321.40
6.16.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 9963.45
6.17 Tile brick masonry with common burnt clay machine moulded tile bricks of
class designation 12.5 conforming to IS : 2690 (Part I) in foundation
and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). cum 9963.45
6.18 Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of
class designation 10 in superstructure above plinth level up to
floor V level in cement mortar 1:6 (1 cement : 6 coarse sand). cum 11659.70
6.20 Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of
class designation 10 in plain arch work in superstructure above plinth and upto floor five
level in cement mortar 1:4 (1 cement : 4
coarse sand) including centering and shuttering complete. cum 16791.90
6.21 Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of
class designation 10 in gauged arch work in superstructure above plinth and upto floor
five level in cement mortar 1:4 (1 cement : 4
coarse sand) including centering and shuttering complete. cum 20135.45
6.22 Tile brick masonry work 5 cm thick with common burnt clay F.P.S.
(non modular) tile bricks of class designation 10 in cement mortar 1:3 (1 cement : 3 coarse
sand) in superstructure above plinth and upto
floor five level. sqm 841.85
HONEY COMB WORK
6.23 Honey-comb brick work 10 / 11.4 cm thick with common burnt clay bricks of
class designation 7.5 in super structure above plinth level
upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand). sqm 645.95
6.24 Extra for laying brick work in or under water and/or liquid mud including cum per 905.50
cost of pumping or bailing out water and removing slush etc. complete. metre depth
NOTE :- The quantity will be calculated by multiplying the depth
measured from sub - soil water level up to the centre of gravity of brick work
under sub - soil water with the quantity of brick work in cum. executed under
the sub - soil water. The depth of centre of gravity shall be reckoned correct to
0.1 m, 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored.

6.25 Extra for laying brick work in or under foul position. cum 385.25
EXPOSED BRICK WALL
6.26 Brick work with common burnt clay selected F.P.S. (non modular) bricks of
class designation 7.5 in exposed brick work including making horizontal and vertical
grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse
sand)
6.26.1 From ground level upto plinth level cum 6849.50
6.26.2 Above plinth level upto floor V level cum 8565.95
6.27 Brick work with common burnt clay modular bricks of class designation
7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12
mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand).

6.27.1 From ground level upto plinth level cum 5588.65

6.27.2 Above plinth level upto floor V level cum 7218.75
6.28 Brick work with common burnt clay machine moulded modular bricks of class
designation 12.5 in exposed brick work including making horizontal and vertical
grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse
sand).
6.28.1 From ground level upto plinth level cum 6500.85
6.28.2 Above plinth level upto floor V level cum 8131.00
6.29 Brick work with common burnt clay machine moulded F.P.S. (non
modular) bricks of class designation 12.5 in exposed brick work including making
horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6
(1 cement : 6 coarse sand).

6.29.1 From ground level upto plinth level cum 6769.65

6.29.2 Above plinth level upto floor V level cum 8339.65
6.30 Brick work with common burnt clay machine moulded perforated F.P.S.
(non modular) bricks of class designation 12.5 conforming IS : 2222 in exposed brick work
including making horizontal and vertical grooves 10mm wide 12 mm deep complete in
cement mortar 1:6 (1 cement : 6 coarse sand).

6.30.1 From ground level upto plinth level cum 6439.20

6.30.2 Above plinth level upto floor V level cum 8069.30
6.31 Brick work with common burnt clay machine moulded perforated modular
bricks of class designation 12.5 conforming to IS : 2222 in exposed brick work including
making horizontal and vertical grooves 10 mm wide 12mm deep complete in cement
mortar 1:6 (1 cement : 6 coarse sand).

6.31.1 From ground level upto plinth level cum 6240.25

6.31.2 Above plinth level upto floor V level cum 7870.35
6.32 Brick work with clay flyash F.P.S. (non modular) brick of class
designation 7.5 in superstructure above plinth level up to floor five level in :

6.32.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 8414.65

6.32.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 8190.90
6.34 Brick work with non modular fly ash bricks conforming to IS:12894, class
designation 10 average compressive strength in super structure above plinth level up to
floor V level in :

6.34.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 7873.20

6.34.2 Cement mortar 1:6 (1 cement : 6 Coarse sand) cum 7676.30
6.35 Brick work with modular calcium silicate bricks machine moulded
conforming to IS:4139, class designation 10 average compressive strength in super
structure above plinth level up to floor V level in :

6.35.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 8589.95

 6.35.2 Cement mortar 1:6 (1 cement : 6 Coarse sand) cum 8393.05
6.36 Brick work with modular extruded brunt fly ash clay sewer bricks
(Conforming to IS: 4885 ) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation
and plinth :

6.36.1 Cement Mortar 1:4 ( 1 cement : 4 coarse sand) cum 6528.70

6.37 Brick work with modular extruded brunt fly ash clay sewer bricks
(conforming to IS : 4885) in arches in foundation and plinth in cement mortar 1:3 ( 1
cement : 3 fine sand).
cum 11763.25
6.38 Providing and laying autoclaved aerated cement blocks masonry with 100 mm
thick AAC blocks in super structure above plinth level up to floor V level in cement mortar
1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos
6 mm dia M.S. bars at
every third course of masonry work.
cum 8890.80
6.40 Providing and laying Gypsum panel partitions 100 mm thick with water
proof Gypsum panels of size 666x500x100 mm, made of calcite
phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster
as per manufacturer’s specifications in superstructure above plinth level up to
floor V level. Gypsum blocks will have a minimum
compressive strength of 9.3 kg/cm2 sqm 870.10
6.41 Extra for Gypsum panel Partitions in superstructure above floor V level
for every four floors or part thereof. sqm 149.30
6.44 Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt
clay F.P.S. (non modular) bricks of class designation 7.5 including
grouting with cement mortar 1:4 (1 cement : 4 fine sand). metre 55.80
6.45 Half brick masonry with non modular fly ash bricks of class designation 10,
conformingio IS :12894, in super structure above plinth and upto floor V level.

6.45.1 Cement mortar 1 : 3 (1 cement : 3 coarse sand) sqm 994.75

6.45.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) sqm 969.65
6.47 Providing and laying autoclaved aerated cement blocks masonry with
150mm/230mm/300 mm thick AAC blocks in super structure above plinth level
up to floor V level with RCC band at sill level and lintel level with approved
block laying polymer modified adhesive mortar all complete as per
direction of Engineer-in-Charge. (The payment of RCC
band and reinforcement shall be made for seperately). cum 6994.15
SUB HEAD : 7.0
STONE WORK

145
 BASIC RATES (SH: 7.0 STONE WORK)
Code Description Unit Rate
No.

0011 Hire charges of Pump set of capacity 4000 litres/hour day 700.00

0100 Bandhani day 714.00

0101 Bhisti day 714.00

0102 Blacksmith 1st class day 784.00

0103 Blacksmith 2nd class day 714.00

0112 Carpenter 2nd class day 714.00

0114 Beldar day 645.00

0115 Coolie day 645.00

0116 Fitter (grade 1) day 784.00

0123 Mason (brick layer) 1st class day 784.00

0124 Mason (brick layer) 2nd class day 714.00

0125 Mason (for plain stone work) 2nd class day 714.00

0126 Mason (for ornamental stone work) 1st class day 784.00

0139 Skilled Beldar (for floor rubbing etc.) day 714.00

0367 Portland Cement (OPC-43 Grade) tonne 5000.00

0373 Cramp Gun metal 25x6x300 mm each 80.00

0873 Copper pins 6 mm dia 7.5 cm long each 10.00

1002 Mild steel round bar 12 mm dia and below quintal 4850.00

1007 Structural steel such as tees, angles channels and R.S. joists quintal 4950.00

1034 Bolts and nuts up to 300 mm in length quintal 5200.00

1154 Through and bond stone 100 Nos 5000.00

1157 Stone for masonry work cum 1100.00

1160 Red sand stone block 10 cudm 80.00

1161 White sand stone block 10 cudm 205.00

1163 White sand stone slab 75 mm thick (un-dressed) sqm 800.00

1164 Red sand stone slab 40 mm thick (un-dressed) sqm 230.00

1165 White sand stone slab 40 mm thick (un-dressed) sqm 250.00

1166 Red sand stone slab 30 mm thick (un-dressed) sqm 220.00

1169 Kota stone slab 25mm thick (rough chiseled) sqm 250.00
Code Description Unit Rate
No.
1197 Second class kail wood in scantling 10 cudm 260.00

1215 Welding by electric plant cm 2.00

1225 Mild steel flat strap fitting quintal 4120.00

1237 Cutting marble or sand stone slab up to 50 mm thick by mechanical device

metre 10.00

2204 Carriage of Timber cum 187.35

2215 Carriage of Soling stone & masonry stone cum 192.86

2216 Carriage of Stone blocks white & red sand stone & kota stone slab tonne 145.72

2302 Carriage of G.I. sheet and accessories tonne 145.72

2750 8 mm thick granite stone tiles (mirror polished of all shades) sqm 690.00

4009 Mild steel tubes hot finished welded type kg 60.00

7339 Stainless steel cramp kg 290.00

7439 8mm thick (mirror polished tiles machine cut edge) Raj Nagar white sqm 450.00

8683 Red sand stone gang saw cut 30 mm thick sqm 476.00

8684 White sand stone gang saw cut 30 mm thick sqm 560.00

8698 Stainless steel cramps(weight 260 grams) with nuts, bolts and washer for dry
stone cladding each 115.00

9977 Carriage L.S. 2.12

9999 Sundries L.S. 2.12

7.0 STONE WORK

Code Description Unit Rate
No.

RANDOM RUBBLE MASONRY

7.1 Random rubble masonry with hard stone in foundation and plinth including
levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12
graded stone aggregate 20 mm nominal size) upto plinth level with :
7.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 6653.45
7.2 Random rubble masonry with hard stone in superstructure above plinth level
and upto floor five level, including leveling up with cement concrete 1:6:12 (1
cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at
window sills, ceiling level and the like.
7.2.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 8275.70
7.4 Extra for random rubble masonry with hard stone in :
7.4.1 Square or rectangular pillars cum 787.05
7.4.2 Circular pillars cum 2160.20
7.5 Extra for random rubble masonry with hard stone curved on plan for a
mean radius not exceeding 6 m. cum 888.30
COURSED RUBBLE MASONRY
7.6 Coursed rubble masonry (first sort) with hard stone in foundation and plinth
with :
7.6.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 7914.50
7.7 Coursed rubble masonry (second sort) with hard stone in foundation & plinth
with :
7.7.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 7380.35
7.8 Coursed rubble masonry with hard stone (first or second sort) in
superstructure above plinth level and upto floor five level.
7.8.1 Masonry work (first sort), in cement mortar 1:6 (1 cement :
6 coarse sand) cum 9508.65
7.8.2 Masonry work (second sort), in cement mortar 1:6 (1 cement:
6 coarse sand) cum 8974.50
7.10 Extra for coursed rubble masonry with hard stone (first or second sort) in:

7.10.1 Square or rectangular pillars cum 873.05

7.10.2 Circular pillars cum 2450.90
7.11 Extra for coursed rubble masonry with hard stone (first or second sort)
curved on plan for a mean radius not exceeding 6 m. cum 962.90
ASHLAR MASONRY
7.12 Stone work in plain ashlar in super structure upto floor five level in cement
mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar
1:2 (1 white cement : 2 stone dust) with an admixture of pigment
matching the stone shade :
 7.12.1 One face dressed
7.12.1.1 Red sand stone cum 50995.00
7.12.1.2 White sand stone cum 73288.00
7.12.2 Both face dressed
7.12.2.1 Red sand stone cum 69930.00

7.12.2.2 White sand stone cum 92223.00

7.13 Stone work plain ashlar in arches in super structure upto floor V level in
cement mortar 1:3 (1 cement : 3 coarse sand) including centering, shuttering and pointing
with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment
matching the stone shade.

7.13.1 One face dressed

7.13.1.1 Red sand stone cum 57116.00
7.13.1.2 White sand stone cum 79409.00
7.13.2 Both face dressed
7.13.2.1 Red sand stone cum 76051.00
7.13.2.2 White sand stone cum 98344.00
7.14 Stone work plain ashlar in domes , in super structure upto floor V level in
cement mortar 1:3 (1 cement : 3 coarse sand) including centering, shuttering and pointing
with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment
matching the stone shade.
7.14.1 One face dressed
7.14.1.1 Red sand stone cum 89552.00
7.14.1.2 White sand stone cum 111845.00
7.14.2 Both face dressed
7.14.2.1 Red sand stone cum 135354.00
7.14.2.2 White sand stone cum 157648.00
7.15 Stone work ashlar punched (ordinary) in superstructure upto floor five level in
cement mortar 1:6 (1 white cement : 6 coarse sand) including pointing with cement mortar
1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone
shade.
7.15.1 One face dressed
7.15.1.1 Red sand stone cum 48225.00
7.15.1.2 White sand stone cum 70518.00
7.15.2 Both faced punched
 7.15.2.1 Red sand stone cum 64389.00
7.15.2.2 White sand stone cum 86682.00
7.16 Extra for stone work, random rubble / coursed rubble masonry / ashlar
masonry above floor V level for every four floors or part thereof. cum 1726.00
7.17 Extra for plain ashlar or ashlar punched in :
7.17.1 Square or rectangular pillars cum 2544.00
7.18 Extra for stone work; plain ashlar or ashlar punched curved on plan with
a mean radius not exceeding 6 m. cum 1770.00
7.19 Extra for additional cost of centering for arches exceeding 6m span including all strutting,
bolting, wedging etc. and removal (area of soffit to
be measured). sqm
575.25
SUNK, MOULDED, CARVED ASHLAR MASONRY
7.20 Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in cement
mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement :
2 stone dust) with an admixture of pigment matching the stone shade :

7.20.1 Red sand stone cum 72673.00

7.20.2 White sand stone cum 94967.00
7.21 Extra for stone work ashlar sunk or moulded or sunk and moulded or carved in :

7.21.1 Triangular or Square or rectangular pillars cum 3319.00

7.21.2 Circular or polygonal pillars cum 9403.00
7.22 Extra for stone work ashlar sunk or moulded in cornices. per metre 249.95
per cm
girth
(60cm deep)
MISCELLANEOUS STONE WORK
7.24 Extra for stone work (veneer work) curved on plan with a mean radius
not exceeding 6 m. cum 2544.00
7.26 Providing and fixing stone dowels 10x5x2.50 cm cut to double wedge shape as per design in
cement mortar 1:2 (1 cement : 2 coarse sand),
including making the necessary chases. each 48.55
7.28 Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the
wall as measured along the slope in cement mortar 1:4 (1 cement : 4 coarse sand) with 12 mm diameter
anchoring steel bar, 45 cm long, fixed in each stone and supported on and including with bricks cove in
cement mortar 1:4 (1 cement : 4 coarse sand), including pointing in cement mortar 1:2 (1 white cement :
2 stone dust) with an admixture of pigment matching the stone shade :

7.28.1 Red sand stone :

7.28.1.1 With common burnt clay F.P.S.(non modular)
bricks of class designation 7.5 sqm 2297.90
7.28.2 White sand stone :
7.28.2.1 With common burnt clay F.P.S.(non modular)
bricks of class designation 7.5 sqm 2334.65
7.29 Providing and fixing horizontal chajja of stone 40 mm thick and upto 80
cm projection in cement mortar 1:4 (1 cement : 4 coarse sand), including pointing in white
cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching
the stone shade :
7.29.1 Red sand stone sqm 1448.05
7.29.2 White sand stone sqm 1480.15
7.30 30 mm red sand stone sun-shade (chisel-dressed) supported on red sand
stone brackets, fixed in walls with cement mortar 1:4 (1 cement :
4 coarse sand), including finishing complete. sqm 1703.00
7.31 Providing and fixing red sand stone brackets 55x22.5x45 cm sunk and
moulded including providing and fixing with 4 Nos gun metal cramp 25x6 mm 30 cm long

each 5362.25
7.32 Stone work, plain in copings, cornices, string courses and plinth courses, upto
75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with
white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment
matching the stone shade.
7.32.1 Red sand stone cum 72090.35
7.32.2 White sand stone cum 94383.70
7.33 Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1
cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2
stone dust) with an admixture of pigment, matching the stone shade, jali slab without any
chamfers etc.
7.33.1 Red sand stone sqm 12241.70
7.33.2 White sand stone sqm 12271.15
7.34 Extra for laying stone work in or under water and/or liquid mud including cum per 905.50
cost of pumping or bailing out water and removing slush etc. complete. metre
depth
NOTE :- The quantity will be calculated by multiplying the depth
measured from sub-soil water level up to the centre of gravity of stone work
under sub - water with the quantity of stone work in cum executed under the
sub-soil water. The depth of centre of gravity shall be reckoned correct to 0.1
m, 0.05 m or more shall be taken as 0.1 m and less than
0.05 m ignored.
7.35 Extra for laying stone work in or under foul position. cum 385.25
7.38 Stone tile work for wall lining upto 10 m height with special adhesive over 12
mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white
cement with an admixture of pigment to match the stone shade.

7.38.1 8mm thick (mirror polished and machine cut edge)

7.38.1.1 Granite stone of any colour and shade sqm 2675.70
7.38.1.2 Raj Nagar plain white marble/ Udaipur green
marble/ Zebra black marble sqm 2346.55
 SUB HEAD : 8.0
CLADDING WORK

153
 BASIC RATES (SH: 8.0 CLADDING WORK)
Code Description Unit Rate
No.

0013 Machine for rubbing of floors day 300.00

0019 Hand Grinder for mirror polish day 250.00

0100 Bandhani day 714.00
0101 Bhisti day 714.00
0102 Blacksmith 1st class day 784.00
0114 Beldar day 645.00
0115 Coolie day 645.00
0116 Fitter (grade 1) day 784.00
0123 Mason (brick layer) 1st class day 784.00
0124 Mason (brick layer) 2nd class day 714.00
0126 Mason (for ornamental stone work) 1st class day 784.00
0128 Mate day 714.00
0139 Skilled Beldar (for floor rubbing etc.) day 714.00
0367 Portland Cement (OPC-43 Grade) tonne 5000.00
0368 White Cement tonne 11200.00
0874 Black colour dark shade pigment kg 70.00
1034 Bolts and nuts up to 300 mm in length quintal 5200.00
1239 18 mm thick Flamed finish granite stone slab sqm 1000.00
1240 18 mm thick Italian Marble stone slab, Perlato (slab area up to 0.5 sqm).
sqm 3209.00

2209 Carriage of Cement tonne 145.72

2216 Carriage of Stone blocks white & red sand stone & kota stone slab
tonne 145.72

2750 8 mm thick granite stone tiles (mirror polished of all shades) sqm 690.00
2751 8 mm thick marble tiles (polished) Raj Nagar sqm 400.00
4009 Mild steel tubes hot finished welded type kg 60.00
7244 Table rubbed polished stone 18 mm thick (75x50cm) Agaria Marble stone - 18
mm thick sqm 1500.00
7245 Table rubbed polished stone 18mm thick (75x50cm) Granite stone-18 mm
thick sqm 1800.00

7295 Granite of colour black, cherry/ruby red 18 mm thick (slab area upto 0.50 sqm)
sqm 1800.00

7296 Granite of colour black, cherry/ruby red 30 mm thick (slab area upto 0.50 sqm)
sqm 1900.00

Code Description Unit Rate

No.
7297 Granite of all colour except black, cherry/ruby red 18 mm thick (slab area upto
0.50 sqm) sqm 1000.00

7298 Granite of colour black, cherry/ruby red 18 mm thick (slab area above 0.50
sqm) sqm 2000.00

7299 Granite of all colour except black, cherry/ruby red 18 mm thick (slab area
above 0.50 sqm) sqm 1200.00

7300 Granite of all colour except black, cherry/ruby red 30 mm thick (slab area
above 0.50 sqm) sqm 2100.00

7338 Gun metal cramp kg 315.00

7339 Stainless steel cramp kg 290.00
7430 Wedge expansion hold fastener 1/4" or 6 mm each 8.00
7431 Wedge expansion hold fastener 3/8" or 10 mm each 10.00
7432 Wedge expansion hold fastener 1/2" or 12 mm each 24.00
7452 Raj nagar plain white marble (table rubbed and polished) 18 mm thick (slab
area upto 0.50 sqm) sqm 538.00

7453 Raj nagar plain white marble (table rubbed and polished) 18 mm thick (slab
area more than 0.50 sqm) sqm 650.00

9977 Carriage L.S. 2.12

9999 Sundries L.S. 2.12
8.0 CLADDING WORK

Code Description Unit Rate

No.

8.1 Marble work gang saw cut (polished and machine cut) of thickness 18
mm for wall lining (veneer work), backing filled with a grout of average 12
mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including
pointing with white cement mortar 1:2 (1 white cement : 2 marble dust)
with an admixture of pigment to match the marble shade (To be secured
to the backing by means of cramps, which shall be paid for separately).
8.1.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra
black marble.
8.1.1.1 Area of slab upto 0.50 sqm sqm 4827.40
8.1.1.2 Area of slab over 0.50 sqm sqm 4998.10
8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished,
 premoulded and prepolished, machine cut for kitchen platforms, vanity
counters, window sills, facias and similar locations of required size,
approved shade, colour and texture laid over 20 mm thick base cement
mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,
mixed with matching pigment, epoxy touch ups, including rubbing, curing,
moulding and polishing to edges to give high gloss finish etc. complete
at all levels.
8.2.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra
black marble
8.2.1.1 Area of slab upto 0.50 sqm sqm 2906.45
8.2.1.2 Area of slab over 0.50 sqm sqm 2639.45
8.2.2 Granite stone slab colour black, Cherry/Ruby red
8.2.2.1 Area of slab upto 0.50 sqm sqm 4679.35
8.2.2.2 Area of slab over 0.50 sqm sqm 4425.35
8.2.3 Granite stone slab all colour and texture except black, Cherry/
Ruby red
8.2.3.1 Area of slab upto 0.50 sqm sqm 3555.45
8.2.3.2 Area of slab over 0.50 sqm sqm 3301.45
8.3 Providing edge moulding to 18 mm thick marble stone counters, Vanities
etc., including machine polishing to edge to give high gloss finish etc.
complete as per design approved by Engineer-in-Charge.
8.3.1 Marble work metre 244.90
8.3.2 Granite work metre 418.85
8.4 Extra for fixing marble /granite stone, over and above corresponding
basic item, in facia and drops of width upto 150 mm with epoxy resin
based adhesive, including cleaning etc. complete. metre 475.55
8.5 Extra for providing opening of required size & shape for wash basin/
kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/
stone work, including necessary holes for pillar taps
etc. including moulding, rubbing and polishing of cut edges etc.
complete. each
8.6 Mirror polishing on marble work/Granite work/stone work where ever
required to give high gloss finish complete. sqm
8.7 Providing and fixing cramps of required size & shape in RCC/ CC / Brick
masonry backing with cement mortar 1:2 ( 1 cement :2 coarse sand), including drilling
necessary hole in stones and embedding the cramp in the hole (fastener to be paid
separately).

8.7.1 Gunmetal cramps kg

8.7.2 Stainless steel cramps kg
8.8 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry
surface backing including drilling necessary holes and the cost of bolt etc complete.

8.8.1 Wedge expansion type

8.8.1.1 Fastener with threaded dia 6 mm each
 8.8.1.2 Fastener with threaded dia 10 mm each 33.80
8.8.1.3 Fastener with threaded dia 12 mm each 52.85
8.9 Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar
1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white
cement complete.

8.9.1 8mm thick

8.9.1.1 Raj nagar plain white marble/ Udaipur green
marble/ Zebra black marble sqm 2707.80
8.9.1.2 Granite of any colour and shade sqm 3105.50
8.10 Providing and fixing stone slab with table rubbed, edges rounded and polished,
of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a
chase of appropriate width with chase cutter and embedding the stone in the chase with
epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.

8.10.1 White Agaria Marble Stone sqm 3061.20

8.10.2 Granite Stone of approved shade sqm 3542.85
8.11 Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work
for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design
and pattern wherever required, stones of different finished surface texture, on 12 mm
(average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white
cement
slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed
with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as dire
the Engineer-in-Charge.
8.11.1 18 mm thick Italian Marble stone slab,Perlato, Rosso verona,
Fire Red or Dark Emperadore etc. sqm 9278.95
8.14 Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of
average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white ceme
stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of
and pins which shall be paid for separately) :
8.14.1 Red sand stone - exposed face fine dressed with rough backing.

8.14.1.1 70 mm thick sqm 4824.75

8.14.1.2 60 mm thick sqm 4676.05
8.14.1.3 50 mm thick sqm 4527.65
8.14.1.4 40 mm thick sqm 4378.65
8.14.1.5 30 mm thick sqm 4229.85

8.14.2 Red sand stone - Exposed face machine cut and table
rubbed with rough backing.
8.14.2.1 70 mm thick sqm 6651.90
 8.14.2.2 60 mm thick sqm 6503.15
8.14.2.3 50 mm thick sqm 6354.75
8.14.2.4 40 mm thick sqm 6205.80
8.14.2.5 30 mm thick sqm 6057.00

8.14.3 White sand stone - exposed face fine dressed with rough
backing .
8.14.3.1 70 mm thick sqm 6385.60
8.14.3.2 60 mm thick sqm 6013.95
8.14.3.3 50 mm thick sqm 5643.15
8.14.3.4 40 mm thick sqm 5269.75
8.14.3.5 30 mm thick sqm 4898.65

8.14.4 White sand stone - Exposed face machine cut and table
rubbed with rough backing.
8.14.4.1 70 mm thick sqm 8212.75
8.14.4.2 60 mm thick sqm 7841.10
8.14.4.3 50 mm thick sqm 7470.30
8.14.4.4 40 mm thick sqm 7096.90

8.14.4.5 30 mm thick sqm

8.14.5 Gang saw cut stone
8.14.5.1 30mm thick White sand stone sqm

8.14.5.2 30mm thick Red sand stone sqm

8.15 Providing and fixing stainless steel cramps of required size and shape for
anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in
cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in
stone and holes in walls

wherever required. kg
8.16 Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing
adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2
coarse sand), including making the necessary chases. each
8.17 Wall lining butch work upto 10m height with Dholpur stone 40 mm thick rough
facing on the exposed surface with stone strips of minimum length 300 mm and required
width, including embedding every tenth layer and bottom most layer in masonry or concrete
after making necessary chases of size 75x75 mm and by providing layer of 75 mm thick
strips i/c 12 mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse sand) i/c ruled
pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment
to match the shade of stone complete as per

direction of Engineer-in-charge. sqm

8.18 Stone work (machine cut edges Veneer work) for wall lining upto 10 m height,
backing filled with a grout of 12 mm thick cement mortar 1:3 (1 Cement : 3 coarse sand)
and jointed with Cement mortar 1:2 (1 cement
: 2 stone dust), including rubbing and polishing complete. (To be secured to the backing
and the sides by means of cramps and pins which shall be paid for separately).

8.18.1 Kota stone slabs exposed face dressed and rubbed.

 8.18.1.1 25 mm thick sqm 3122.30
8.19 Extra for stone work for wall lining on exterior walls of height more than sqm 140.85
10 m from ground level for every additional height of 3 m or part there of.
STONE WORK DRY CLADDING
8.20 Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang
saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to
structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints
with approved weather sealant as per Architectural drawing and direction of Engineer-in-
charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for
separately).

8.20.1 Red sand stone - 30mm thick gang saw cut stone sqm 2459.70
8.20.2 White sand stone - 30mm thick gang saw cut stone sqm 2577.70
8.21 Providing and fixing structural steel frame (for dry cladding with 30 mm
thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S.
square/ rectangular tube in the required pattern as per architectural drawing, including
cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the
help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and
embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4
graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of
necessary centring and shuttering and with approved expansion hold fasteners on
CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be
welded to the frame work to support stone cladding, the steel work will be given a priming
coat of Zinc primer as approved by Engineer- in-charge and painted with two or more
coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-
in-charge for approval before execution). The frame work shall be fixed in true horizontal &
vertical lines/planes. (Only structural steel frame work shall be measured for the purpose
of payment, stainless steel cramps shall be paid for separately and nothing extra shall be
paid).

kg 220.00
8.22 Providing and fixing adjustable stainless steel cramps of approved quality,
required shape and size, adjustable with stainless steel nuts, bolts and washer (total
weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable
location, including making necessary recesses in stone slab, drilling required holes etc
complete as per direction of the Engineer-in-charge.

each 365.65
8.23 Providing 50x50x50 mm 2nd class teak wood plugs including cutting brick work
and fixing in cement mortar 1:3 (1 cement : 3 fine sand) and making good the walls etc.
each 35.50

8.24 Providing and fixing expandable fasteners of specified size with necessary
plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/
R.C.C. and making good etc. complete.
 8.24.1 25 mm long each 19.30
8.24.2 32 mm long each 20.75
8.24.3 40 mm long each 24.75
8.24.4 50 mm long each 26.10
8.25 Providing and fixing 2nd class teak wood plain lining tongued and grooved,
including wooden plugs complete with necessary screws and priming coat on unexposed
surface.

8.25.1 40 mm thick sqm 6187.90

8.25.2 25 mm thick sqm 4106.45
8.25.3 20 mm thick sqm 3330.20
8.25.4 12 mm thick sqm 2220.05
8.26 Providing and fixing in wall lining flat pressed three layer (medium density)
particle board or graded wood Pre-laminated one side decorative lamination and
other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming
coat on unexposed arrangement and screws etc. complete :

8.26.1 12 mm thick sqm 1216.35

8.26.2 18 mm thick sqm 1304.65
8.26.3 25 mm thick sqm 1731.45
8.27 Providing and fixing specified wood frame work consisting of battens 50x25mm
fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat
complete.

8.27.1 Kiln seasoned and chemically treated hollock wood cum 163814.10
8.28 Providing and fixing plywood 4 mm thick, one side decorative veneer
conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including
priming coat on unexposed surface with :
8.28.1 Decorative veneer facings of approved manufacture sqm 1645.80
8.29 Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842, plain
lining with necessary screws, priming coat on unexposed surface
etc., complete. sqm 1549.45
8.30 Providing and fixing skirting with Pre-laminated (one side decorative and other
side balancing lamination) flat pressed 3 layer or graded particle board (medium density)
Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws,
including drilling necessary holes for rawl plugs etc. and priming coat on unexposed
surface complete :

8.30.1 18 mm thick sqm 1723.05

8.30.2 25 mm thick sqm 2149.85
8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:
15622 (thickness to be specified by the manufacturer), of approved make, in all colours,
shades except burgundy, bottle green, black of any size as approved by Engineer-in-
Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3
(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,
including pointing in white cement mixed with pigment of matching shade

complete. sqm 1063.45

8.32 Designing, fabricating, testing, installing and fixing in position Curtain Wall with
Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear
portions of the building , for all heights and all levels etc. including:

(a) Structural analysis & design and preparation of shop drawings for
pressure equalisation or rain screen principle as required, proper drainage of
water to make it watertight including checking of all the structural and
functional design.
(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in
metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick
FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel
cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of
approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel
screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated
washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon
separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The
item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual
components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium
composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the
handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium
item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance
characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the
approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the
actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of
groove) shall be measured in sqm. up to two decimal places. sqm 4474.20
 SUB HEAD : 9.0
WOOD AND P.V.C. WORK

165
 BASIC RATES (SH: 9.0 WOOD AND P.V.C. WORK)
Code Description Unit Rate
No.

0100 Bandhani day 714.00

0101 Bhisti day 714.00

0102 Blacksmith 1st class day 784.00
0103 Blacksmith 2nd class day 714.00
0111 Carpenter 1st class day 784.00
0112 Carpenter 2nd class day 714.00
0114 Beldar day 645.00
0116 Fitter (grade 1) day 784.00
0119 Glazier day 714.00
0123 Mason (brick layer) 1st class day 784.00
0124 Mason (brick layer) 2nd class day 714.00
0130 Mistry day 784.00
0131 Painter day 714.00
0156* Carpenter (average) day 749.00
0162 Labour for fabrication of uPVC extruded casement/ sliding win- dows and
doors including drilling holes, fixing of fittings & hard wares, hire charges of
drill machine and electricity charges etc.
sqm 534.00
0163 Labour for installation of uPVC extruded casement/ sliding windows and doors
including scaffolding sqm 773.00

0237 Multi purpose fibre reinforced by organic fibres and/or inorganic synthetic
fibres cement board 8 mm thick sqm 220.00

0243 8 mm thick mulitipurpose cement bonded wood particle board conforming to

IS : 14276 sqm 215.00

0305 Bamboo 25 mm dia 2.5 metre long score 400.00

0341 Flat pressed 3 layer particle board (medium density) Grade 1, 12 mm thick
sqm 288.00

0346 Extra for veneered particle board with Teak veneering on one side and
commercial veneering on other side sqm 230.00

0347 Extra for veneered particle board with Commercial veneering on both sides
sqm 155.00

0348 Extra for veneered particle board with Teak veneering on both sides sqm 500.00
0378 Brass butt hinges (light/ordinary type) : 125x70x4 mm 10 Nos 775.00
0379 Brass butt hinges (light/ordinary type) : 100x70x4 mm 10 Nos 625.00
0380 Brass butt hinges (light/ordinary type) : 75x40x2.5 mm 10 Nos 380.00
0381 Brass butt hinges (light/ordinary type) : 50x40x2.5 mm 10 Nos 155.00
0382 Brass butt hinges (heavy type) : 125x85x5.5 mm(0.70 kg) 10 Nos 1309.00
0383 Brass butt hinges (heavy type) : 100x85x5.5 mm(0.56 kg) 10 Nos 997.00
0384 Brass butt hinges (heavy type) :75x65x4.0 mm (weighing not less than 0.20
kg) 10 Nos 838.00

0385 Brass parliamentary hinges 150x125x27x5 mm 10 Nos 2610.00

0386 Brass parliamentary hinges 125x125x27x5 mm 10 Nos 2300.00

0387 Brass parliamentary hinges 100x125x27x5 mm 10 Nos 2090.00
0388 Brass parliamentary hinges 75x100x20x3.2 mm 10 Nos 1870.00
0400 Brass tower bolt (barrel type) 250x10 mm each 257.00
0401 Brass tower bolt (barrel type) 200x10 mm each 205.00
0402 Brass tower bolt (barrel type) 150x10 mm each 154.00
0403 Brass tower bolt (barrel type) 100x10 mm each 103.00
0408 Brass handles 125 mm with plate 175x32 mm each 144.00
0409 Brass handles 100 mm with plate 150x32 mm each 133.00
0410 Brass handles 75 mm with plate 125x32 mm each 103.00
0411 Brass door latch 300x16x5 mmweighing not less than 0.380 kg each 185.00
0412 Brass door latch 250x16x5 mm weighing not less than 0.350 kg each 175.00
0413 Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass
lever handles each 400.00

0414 Brass mortice latch 100x65mm with a pair of brass lever handles each 310.00
0423 Brass casement window fastener each 45.00
0424 Brass casement stays (straight peg type) 300 mm weighing not less than 0.33
kg each 126.00

0425 Brass casement stays (straight peg type) 250 mm weighing not less than 0.28
kg each 100.00

0426 Brass casement stays (straight peg type) 200 mm weighing not less than 0.24
kg each 95.00

0431 Brass hasps and staples (safety type) 150 mm 10 Nos 740.00
0432 Brass hasps and staples (safety type) 115 mm 10 Nos 670.00
0433 Brass hasps and staples (safety type) 90 mm 10 Nos 575.00
0438 Brass night latch each 610.00
0447 Brass cupboard knob or wardrobe knob 50 mm each 36.00
0449 Brass screws 50 mm 100 Nos 220.00
0450 Brass screws 40 mm 100 Nos 170.00
0451 Brass screws 30 mm 100 Nos 140.00
0452 Brass screws 25 mm 100 Nos 100.00
0453 Brass screws 20 mm 100 Nos 95.00
0552 75mm SS fancy handles for kitchen cabinet 10 Nos. 255.00
0553 100mm SS fancy handles for kitchen cabinet 10 Nos 455.00
0554 125mm SS fancy handles for kitchen cabinet 10 Nos 640.00
0555 Chromium plated Brass handles 125 mm with plate 175 x32 mm each 160.00
0556 Chromium plated Brass handles 100 mm with plate 150 x 32 mm each 140.00
0557 Chromium plated Brass handles 75mm with plate 125x32 mm each 125.00
0558 Chromium plated Brass mortice latch and lock 100x65 mm with 6 levers and a
pair of brass lever handles each 470.00

0568 Chromium plated brass casement window fastener each 90.00

0569 Chromium plated Brass casement stays (straight peg type) 300 mm weighing
not less than 0.33 kg each 140.00

0570 Chromium plated Brass casement stays (straight peg type) 250 mm weighing
not less than 0.28 kg each 120.00

0571 Chromium plated Brass casement stays (straight peg type) 200 mm weighing
not less than 0.24 kg each 100.00

0583 Chromium plated Brass Night latch each 500.00

0584 Chromium plated Brass Wardrobe Knob 50 mm each 80.00
0585 Chromium plated Brass screws 50 mm 100 Nos 300.00
0586 Chromium plated Brass screws 40 mm 100 Nos 290.00
0587 Chromium plated Brass screws 30 mm 100 Nos 240.00
0588 Chromium plated Brass screws 25 mm 100 Nos 180.00
0589 Chromium plated Brass screws 20 mm 100 Nos 160.00
0590 Chromium plated Brass curtain rod 12 mm dia 1.25mm thick metre 185.00
0591 Chromium plated Brass curtain rod 20 mm dia 1.25mm thick metre 260.00
0592 Chromium plated Brass curtain rod 25 mm dia 1.25mm thick metre 340.00
0594 Bright finished or black enameled mild steel butt hinges 125x65x
2.12 mm 10 Nos 135.00

0595 Bright finished or black enameled mild steel butt hinges 100x58x
1.90 mm 10 Nos 80.00

0596 Bright finished or black enameled mild steel butt hinges 75x47x
1.70 mm 10 Nos 56.00

0597 Bright finished or black enameled mild steel butt hinges 50x37x
1.50 mm 10 Nos 49.00

0608 Nickel plated bright finished mild steel piano hinges 1 mm thick 25 mm wide
metre 39.00

0635 Bright finished or black enameled mild steel screws 50 mm 100 Nos 75.00
0637 Bright finished or black enameled mild steel screws 40 mm 100 Nos 60.00
0638 Bright finished or black enameled mild steel screws 30 mm 100 Nos 45.00
0639 Bright finished or black enameled mild steel screws 25 mm 100 Nos 40.00
0640 Bright finished or black enameled mild steel screws 20 mm 100 Nos 35.00
0641 Bright finished or black enameled mild steel bolts and nuts 50x6 mm
each 5.00

0642 Oxidised mild steel butt hinges 125x65x2.12 mm 10 Nos 125.00

0643 Oxidised mild steel butt hinges 100x58x1.90 mm 10 Nos 90.00
0644 Oxidised mild steel butt hinges 75x47x1.70 mm 10 Nos 65.00
0645 Oxidised mild steel butt hinges 50x37x1.50 mm 10 Nos 55.00

0646 Oxidised mild steel parliamentary hinges 150x125x27x2.8 mm 10 Nos 335.00

0647 Oxidised mild steel parliamentary hinges 125x125x27x2.8 mm 10 Nos 300.00
0648 Oxidised mild steel parliamentary hinges 100x125x27x2.8 mm 10 Nos 235.00
0649 Oxidised mild steel parliamentary hinges 75x100x20x2.24 mm 10 Nos 200.00
0650 Oxidised mild steel single acting spring hinges 150 mm each 140.00
0651 Oxidised mild steel single acting spring hinges 125 mm each 120.00
0652 Oxidised mild steel single acting spring hinges 100 mm each 100.00
0653 Oxidised mild steel double acting spring hinges 150 mm each 160.00
0654 Oxidised mild steel double acting spring hinges 125 mm each 140.00
0655 Oxidised mild steel double acting spring hinges 100 mm each 120.00
0656 Nickel plated mild steel piano hinges 1 mm thick 35 mm wide metre 40.00
0660 Oxidised mild steel sliding door bolt 300x16 mm each 90.00
0661 Oxidised mild steel sliding door bolt 250x16 mm each 80.00
0662 Oxidised mild steel door latch 300x20x6 mm each 49.00
0663 Oxidised mild steel door latch 250x20x6 mm each 39.00
0664 Oxidised mild steel tower bolt (barrel type) 250x10 mm each 43.00
0665 Oxidised mild steel tower bolt (barrel type) 200x10 mm each 34.00
0666 Oxidised mild steel tower bolt (barrel type) 150x10 mm each 29.00
0667 Oxidised mild steel tower bolt (barrel type) 100x10 mm each 20.00
0668 Oxidised mild steel handles 125 mm each 20.00
0669 Oxidised mild steel handles 100 mm each 15.00
0670 Oxidised mild steel handles 75 mm each 12.00
0679 Oxidised mild steel hasps and staples (safety type) 150 mm 10 Nos 128.00
0680 Oxidised mild steel hasps and staples (safety type) 115 mm 10 Nos 108.00
0681 Oxidised mild steel hasps and staples (safety type) 90 mm 10 Nos 79.00
0682 Oxidised mild steel screws 50 mm 100 Nos 76.00
0683 Oxidised mild steel screws 40 mm 100 Nos 62.00
0684 Oxidised mild steel screws 30 mm 100 Nos 49.00
0685 Oxidised mild steel screws 25 mm 100 Nos 36.00
0686 Oxidised mild steel screws 20 mm 100 Nos 32.00
0687 Anodised Aluminium butt hinges 125x75x4 mm 10 Nos 560.00
0688 Anodised Aluminium butt hinges 125x63x4 mm 10 Nos 393.00
0689 Anodised Aluminium butt hinges 100x75x4 mm 10 Nos 393.00
0690 Anodised Aluminium butt hinges 100x63x3.2 mm 10 Nos 270.00
0691 Anodised Aluminium butt hinges 100x63x4 mm 10 Nos 324.00
0692 Anodised Aluminium butt hinges 75x63x4 mm 10 Nos 275.00
0693 Anodised Aluminium butt hinges 75x63x3.2 mm 10 Nos 226.00

0694 Anodised Aluminium butt hinges 75x45x3.2 mm 10 Nos 196.00

0696 Anodised Aluminium sliding door bolt 300x16 mm each 147.00
0697 Anodised Aluminium sliding door bolt 250x16 mm each 128.00
0698 Anodised Aluminium tower bolt (barrel type) 300x10 mm 10 Nos 580.00
0699 Anodised Aluminium tower bolt (barrel type) 250x10 mm 10 Nos 481.00
0700 Anodised Aluminium tower bolt (barrel type) 200x10 mm 10 Nos 383.00
0701 Anodised Aluminium tower bolt (barrel type) 150x10 mm 10 Nos 304.00
0702 Anodised Aluminium tower bolt (barrel type) 100x10 mm 10 Nos 226.00
0703 Anodised Aluminium handles 125 mm with plate 175 x 32 mm 10 Nos 324.00
0704 Anodised Aluminium handles 100 mm with plate 150 x 32 mm 10 Nos 275.00
0705 Anodised Aluminium handles 75mm with plate 125 x 32 mm 10 Nos 231.00
0706 Anodised Aluminium kicking plate 50 cm long 100x3.15 mm each 142.00
0713 Block board construction flush door with teak wood ply on both faces 35 mm
thick sqm 1800.00

0714 Block board construction flush door with teak wood ply on both faces 30 mm
thick sqm 1600.00

0715 Block board construction flush door with teak wood ply on both faces 25 mm
thick sqm 1400.00

0717 Block board construction flush door with commercial ply on both faces 35 mm
thick sqm 1000.00

0718 Block board construction flush door with commercial ply on both faces 30 mm
thick sqm 900.00

0719 Block board construction flush door with commercial ply on both faces 25 mm
thick sqm 890.00

0752 Block board construction flush door lipping 25 mm thick sqm of door
area 300.00

0753 Square vision panel in Block board construction flush door not exceeding 0.10 sqm of door
sqm area 130.00

0754 Circular vision panel in Block board construction flush door sqm of door
area 135.00

0755 Decorative type louvers in Block board construction flush door sqm of door
area 265.00

0757 Rebate cutting in block board construction flush door sqm of door
area 70.00

0759 Decorative plywood 4 mm sqm 320.00

0763 Glue kg 75.00
0834 Synthetic enamel paint in all shades except black or chocolate shade
litre 165.00

0869 Plaster of Paris kg 5.00

1003 Mild steel round bar above 12 mm dia quintal 4750.00

1008 Flats up to 10 mm in thickness quintal 4850.00

1015 Mild steel expanded metal 20x60 mm strands 3.25 mm wide
1.60 mm thick sqm 280.00
1021 Hard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 7.75
kg/sqm sqm 430.00

1022 Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots
10 Nos 38.00

1189 Second class teak wood in scantling 10 cudm 776.00

1190 Second class teak wood in planks 10 cudm 791.00
1199 Sal wood in scantling 10 cudm 600.00
1200 Kiln seasoned selected sheesham wood planks 10 cudm 650.00
1211 G.I. plain washer for seam bolts 100 Nos 32.00
1231 Extra for selected planks of second class teakwood 10 cudm 150.00
1238 Extra for selected planks of first class teakwood 10 cudm 150.00
2204 Carriage of Timber cum 187.35
2205 Carriage of Steel tonne 145.72
2206 Carriage of Stone aggregate 40 mm nominal size and above cum 178.19
2207 Carriage of Brick tiles 1000 Nos 262.29
2406 Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm)
sqm 309.00

2407 Float glass panes of nominal thickness 5 mm (weight not less than 12.50
kg/sqm) sqm 515.00

2412 Ply wood 5 ply with commercial ply on both faces 6 mm thick sqm 306.00
2413 12 mm commercial ply sqm 510.00
2414 18 mm thick block board with commercial ply veneering on both side
sqm 775.00

2449 Oxidised mild steel pull bolt lock (locking bolt) of size 85 mm x 42 mm with
screws, bolts, nuts and washers complete each 62.00

2451 Brass cupboard lock 6 levers of approved quality, 40 mm size each 57.00
2452 Brass cupboard lock 6 levers of approved quality, 50 mm size each 88.00
2453 Brass cupboard lock 6 levers of approved quality, 65 mm size each 93.00
2454 Brass cupboard lock 6 levers of approved quality, 75 mm size each 108.00
2455 Brass hanging type door stopper 150 mm each 77.00
2456 Hydraulic door closer bottle type M.S. body with necessary accessories and
screws complete each 686.00

2459 Anodised Aluminium hanging type door stopper each 20.00

2464 Anodised Aluminium pull bolt lock (locking bolt) of size 85 mm x 42 mm with
screws, bolts, nuts and washers complete each 48.00

2465 Anodised Aluminium Casement stay 250 mm each 33.00

2466 Hollock wood in scantling 10 cudm 357.00

2468 Nickled Chromium Brass cupboard lock 40 mm size each 63.00
2469 Nickled Chromium Brass cupboard lock 50 mm size each 73.00
2470 Nickled Chromium Brass cupboard lock 65 mm size each 99.00
2471 Nickled Chromium Brass cupboard lock 75 mm size each 125.00
2480 Ply wood 5 ply with teak ply on both faces 9 mm thick sqm 884.00
2481 Ply wood 5 ply with teak ply on one face and commercial ply on another face 9
mm thick sqm 905.00

2483 Ply wood 7 ply with teak ply on one face and commercial ply on another face 9
mm thick sqm 1010.00

2484 Pre-laminated with decorative lamination on both side exterior Grade-I MDF
Board 12 mm thick confirming to IS:14587 sqm 469.00

2485 Pre-laminated with decorative lamination on both side exterior Grade-I MDF
Board 18 mm thick confirming to IS:14587 sqm 609.00

2486 Pre-laminated with decorative lamination one side and other side balancing
lamination exterior Grade-I MDF Board 25 mm thick confirming to IS: 14587

sqm 877.00
2487 Pre-laminated with decorative lamination one side and other side balancing
lamination exterior Grade-I MDF Board 12 mm thick confirming to IS:14587

sqm 439.00
2488 Pre-laminated with decorative lamination one side and other side balancing
lamination exterior Grade-I MDF Board 18 mm thick confirming to IS:14587

sqm 582.00
2489 PVC edge bending tape 2.00 mm thick metre 21.00
2495 18mm thick both sides Pre-laminated cement bonded wood particle board as
per IS : 15786:2008 sqm 650.00

2496 6mm thick both sides Pre-laminated cement bonded wood particle board as
per IS : 15786:2008 sqm 455.60

2497 19mm thick prelaminated ply sqm 1500.00

2498 19mm thick both side balancing lamination factory pressed BWP grade marine
ply as per IS 710 sqm 1450.00

2504 Kiln seasoning of timber cum 772.00

2505 Hollock wood in planks 10 cudm 402.00
2640 Glass panes of required thickness having 120 minutes of fire resis- tance both
integrity and radiation control (EI 120) and minimum 20 minutes of insulation
(EI 20)
sqm 25500.00
2641 G.I U beading of 1.6 mm thick G.I sheet with ceramic tape. metre 250.00
2642 Ceramic tape 5 x20 mm size metre 400.00
3991 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for small series casement
window/door frame, sash, mullion & small series sliding window frame

metre 70.00
3992 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big series
casement window/door frame, sash, mullion, big & small series sliding window metre 75.00
frame
3993 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big series casement
door sash metre 100.00

3994 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big series sliding
window / door sash metre 90.00

3995 G.I fasteners 100 x 8 mm each 15.00

7001 Brass 100mm mortice latch and lock with 6 levers without pair of handles
each 195.00

7003 Pair of Anodised Aluminium lever handles for 100 mm mortice latch and lock
each 215.00

7009 12.5 mm thick tapered edge plain gypsum plaster borad confirming to IS 2095
(Part 1):2011 sqm 140.00

7018 Joint tape roll roll 90.00

7019 Dash fastener / Chemical fastener each 12.50
7020 All drive screws (for gypsum board) 100 Nos 58.00
7021 Primer (for gypsum board) litre 70.00
7023 Chromium plated brackets (curtain rods) each 8.00
7029 Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of
wire 0.63 mm sqm 250.00

7032 Frosted glass sheet of nominal thickness 4 mm (weighing not less than 10
kg/sqm) sqm 420.00

7033 Nickel plated M.S. pipe 25 mm dia metre 76.00

7034 Nickel plated M.S. pipe 20 mm dia metre 72.00
7035 Nickel plated M.S. Brackets for curtain rod 20 mm each 7.00
7036 Nickel plated M.S - Brackets for curtain rod 25 mm each 8.00
7040 Oxidised mild steel screws 35 mm 100 Nos 48.00
7042 Mild steel conduit pipe (heavy type) ISI marked-20 mm dia metre 42.00
7043 Mild steel conduit pipe (heavy type) ISI marked-25 mm dia metre 54.00
7048 Rawl plug 50 mm (designation 10 nos) each 22.00
7049 Teak wood lipping of size 25x3 mm in pelmets metre 12.00
7055 Flat pressed 3 layer and graded particle board (medium density) Grade 1
conforming to IS : 3087 - 18 mm thick sqm 430.00

7059 Aluminium hanging floor door stopper with twin rubber & stopper each 40.00
7060 Hydraulic door closer tubular type Aluminium section body each 560.00
7063 Oxidised M.S.casement stay (straight peg type) 300 mm not less than 0.20 kg
each 35.00

7064 Oxidised M.S.casement stay (straight peg type) 250 mm not less than 0.15 kg
each 30.00

7065 Oxidised M.S. casement stay (straight peg type) 200 mm not less
than 0.12 kg each 25.00

7137 Factory made 35 mm thick shutters with laminated veneer lumber styles &
rails as per TADS 15:1995 and panels of 12 mm thick plain type-I, medium
density flat pressed three layer, graded par- ticle board (FPT-I) as per IS:3087
bonded with BWP type synthetic resin adhesive, as per IS:848

sqm 1620.00
7139 Factory made 35 mm thick shutters with laminated veneer lumber styles &
rails as per TADS 15:1995 and panels of 12 mm thick both sides prelaminated
type-I, medium density flat pressed three layer, graded particle board (FPT-I)
as per IS:3087 bonded with BWP type synthetic resin adhesive, as per IS:848

sqm 1720.00
7143 Factory made 35 mm thick shutters with laminated veneer lumber styles &
rails as per TADS 15:1995 and panels of 12 mm thick one side prelaminated
type-I, and other side balancing lamination, me- dium density flat pressed
three layer, graded particle board (FPT-I) as per IS:3087 bonded with BWP
type synthetic resin adhesive, as per IS:848

sqm 1910.00
7151 Factory made 30 mm thick shutters with laminated veneer lumber styles &
rails as per TADS 15:1995 and panels of sheet glass using 10 kg/ sqm glass
panes
sqm 1620.00
7154 Factory made 35 mm thick shutters with laminated veneer lumber styles &
rails as per TADS 15:1995 and panels of galvanised wire gauge with average
width of aperture 1.4 mm in both directions with wire of dia 0.63 mm

sqm 1620.00
7155 Factory made 30 mm thick shutters with laminated veneer lumber styles &
rails as per TADS 15:1995 and panels of galvanised wire gauge with average
width of aperture 1.4 mm in both directions with wire of dia 0.63 mm

sqm 1430.00
7157 Laminated veneer lumber confirming to TADS 15:1995 manufactured
in factory in frames of doors, windows 10 cudm 700.00

7184 Oxidised M.S. safety chain (weighing not less than 450 gms) for door
each 57.00

7269 25 mm thick particle board sqm 435.00

7271 Second class teak wood lipping 25 mm wide x 12 mm thick metre 28.00
7272 25 mm thick melamine faced prelaminated three layer particle board
sqm 900.00

7307 For flush door shutters Extra for providing teak veneering on one side instead
of commercial veneering sqm 305.00

7312 Expandable fastener with plastic sleeve and M.S. screws : 25 mm long
each 10.00

7313 Expandable fastener with plastic sleeve and M.S. screws : 32 mm long
each 10.00

7314 Expandable fastener with plastic sleeve and M.S. screws : 40 mm long
each 13.00

7315 Expandable fastener with plastic sleeve and M.S. screws.

50 mm long each 14.00

7349 12 mm M.S. 'U' beading metre 14.00

7366 Glass reinforced Gypsum ( GRG) plaster board 12.5 mm thick confirming to
IS 2095 (Part 3):1996 sqm 240.00
7367 Galvanised M.S. sheet 0.5 mm thick pressed channel section of size 50x32
mm metre 60.00

7369 Galvanised M.S. sheet 0.50 mm thick pressed stud : 48x34x36 mm metre 70.00
7388 Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt each 10.00
7390 EPDM Gasket for uPVC window/door metre 15.00
7443 Aluminium single cleat of size 30x32x3 mm each 14.00
7444 Aluminium grip strip of size 50x12x2 mm each 11.00
7445 25 mm thick prelaminated flush door shutter both side decorative sqm 800.00
7449 Aluminium U beading kg 210.00
7451 Glass sheet (Pin headed) 4 mm thick sqm 345.00
7468 Veneered particle board with commercial veneering on both sides 12 mm thick
sqm 480.00

7477 Prelaminated particle board with one side decorative and other side balancing
lamination, flat pressed 3 layer & graded (medium density) Grade i, Type II
conforming to IS : 12823 (exterior grade) 12 mm thick

sqm 500.00
7478 Prelaminated particle board with one side decorative and other side balancing
lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II
conforming to IS : 12823 (exterior grade) 18 mm thick

sqm 560.00
7479 Prelaminated particle board with one side decorative and other side balancing
lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II
conforming to IS : 12823 (exterior grade) 25 mm thick

sqm 850.00
7480 Prelaminated particle board with both sides decorative lamination, flat pressed
3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823
(exterior grade) 12 mm thick sqm 490.00

7485 Oxidised M. S. hinges finished with nickel plating 50 mm (Over all width)
metre 40.00

7486 Oxidised M. S. hinges finished with nickel plating 65 mm (Over all width)
metre 52.00

7512 PTMT handle 125x34x24 mm each 20.00

7513 PTMT handle 150x34x24 mm each 20.00
7514 PTMT butt hinges 75x60x10 mm each 29.00
7515 PTMT butt hinges 100x75x10 mm each 36.00
7516 PTMT Tower bolt 152x42x18 mm each 35.00
7517 PTMT Tower bolt 202x42x18 mm each 58.00

7518 PTMT door catcher 72x42 mm each 22.00

7552 Coir veneered board 4 mm thick sqm 260.00
7553 Coir veneered board 6 mm thick sqm 350.00
7555 Coir veneered board 12 mm thick sqm 625.00
7556 Coir veneered board 18 mm thick sqm 930.00
8001 24 mm thick Factory made shutters with style, rails and panels of PVC
extruded sections in white, grey or wooden finish sqm 1085.93

8002 30 mm thick Factory made shutters with style, rails and panels of PVC
extruded sections in white, grey or wooden finish sqm 1248.82

8003 Factory made PVC rigid foam panelled shutter i/c carriage sqm 1547.45
8004 Factory made PVC rigid foam panelled shutter as per IS : 4020 i/c carriage
sqm 1547.45

8006 Factory made PVC rigid foam sheet 1 mm thick sqm 155.80
8010 48mmX40mmX1.5mm thick Factory made door frame of PVC extruded
sections in white, grey or wooden finish metre 130.00

8011 Factory made door frame PVC extruded sheet i/c carriage metre 260.00
8014 Factory made door frame of size 50x47 mm with wall thickness 5 mm made of
single piece extruded profile metre 298.74

8016 High Density expanded poly ethylene (EPE) Foam 1mm thick sqm 10.00
8017 Fire rated door frame made with 1.6 mm thick G.I sheet (120 minutes fire
rating) metre 1200.00

8018 Fire rated door shutter made with 1.6 mm thick G.I sheet (120 minutes fire
rating) including hinges ( without glass panels) sqm 6000.00

8100 Powder coated M.S. butt hinges 100 mm X58 mmX1.9 mm 10 Nos 130.00
8101 SS ball bearing of size 100 x89x3mm each 450.00
8116 Zinc alloy (white powder coated) 3D Hinges for uPVC door each 455.00
8117 Zinc alloy (white powder coated) handles with zinc plated mild steel multi point
locking having transmission gear, cylinder with keeps and one side key for
uPVC casement door
each set 2635.00
8118 Zinc alloy (white powder coated) handles along with zinc plated mild steel
multi point locking having transmission gear with keeps for uPVC sliding
window
each set 1535.00
8119 Zinc alloy (white powder coated) handles with key along with zinc plated mild
steel multi point locking having transmission gear with keeps for uPVC sliding
door
each set 1265.00
8121 uPVC extruded (small series) casement window frame size 47x50mm
metre 280.00

8122 uPVC extruded (small series) casement window sash/window mullion size
47x68 mm metre 311.00

8125 uPVC extruded glazing bead of appropriate dimension for small

series casement window Sash metre 100.00

8126 uPVC extruded (big series) casement window frame size 67x60 mm
metre 351.00

8127 uPVC extruded (big series) casement door frame size 67x64 mm
metre 396.00

8128 uPVC extruded (big series) casement window sash/window mullion/door

mullion size 67x80 mm metre 469.00

8129 uPVC extruded (big series) casement door sash size 67x110 mm metre 568.00
8130 uPVC extruded glazing bead of appropriate dimension for big series casement
window/door sash metre 135.00

8131 uPVC extruded glazing bead of appropriate dimension for small series sliding
window sash metre 66.00

8132 uPVC extruded glazing bead of appropriate dimension for big series of sliding
window/ door sash metre 85.00

8133 uPVC extruded (small series) 2 track sliding window frame size 52x44 mm
metre 314.00

8134 uPVC extruded (big series) 2 track sliding window/door frame size 67x50mm
metre 424.00

8135 uPVC extruded (small series) 3 track sliding window frame size 92x44 mm
metre 418.00

8136 uPVC extruded (big series) 3 track sliding window/door frame size 116x45mm
metre 583.00

8137 uPVC extruded (small series) 2 track sliding window sash/3 track sliding
window sash size 32x60mm metre 291.00

8138 uPVC extruded (big series) 2 track sliding window sash size 46x62mm
metre 357.00

8139 uPVC extruded (big series) 3 track sliding window sash size 46x62mm
metre 358.00

8140 uPVC extruded interlock of appropriate dimension for small series sliding
window sash metre 88.00

8141 uPVC extruded interlock of appropriate dimension for big series sliding
window/ door sash metre 98.00

8142 uPVC extruded inline adaptor of appropriate dimension for big series sliding
window/door sash metre 98.00

8143 uPVC extruded 2 track sliding door sash/ 3 track sliding door sash (big
series) size 46x82mm metre 385.00

8210 Stainless steel screws 50 mm 100 Nos 300.00

8211 Stainless steel screws 40 mm 100 Nos 250.00
8212 Stainless steel screws 30 mm 100 Nos 230.00
8214 Stainless steel screws 20 mm 100 Nos 150.00
8215 Stainless steel butt hinges 125x64x1.9 mm IS : 12817 marked 10 Nos 310.00
8216 Stainless steel butt hinges 100x58x1.9 mm IS : 12817 marked 10 Nos 280.00
8217 Stainless steel butt hinges 75x47x1.8 mm IS : 12817 marked 10 Nos 180.00
8218 Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 Nos 150.00
8219 Stainless steel butt hinges (heavy weight) 125x64x2.5 mm IS :12817 marked
10 Nos 375.00

8220 Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS :12817 marked
10 Nos 275.00

8221 Stainless steel butt hinges (heavy weight) 75x50x2.5 mm IS :12817 marked
10 Nos 230.00

8222 M.S. heavy weight butt hinges 125x90x4.0 mm IS: 1341 marked. 10 Nos 230.00
8223 M.S. heavy weight butt hinges 100x75x3.5 mm IS: 1341 marked 10 Nos 180.00
8224 M.S. heavy weight butt hinges 75x60x3.1 mm IS: 1341 marked 10 Nos 110.00
8225 M.S. heavy weight butt hinges 50x40x2.5 mm IS : 1341 marked 10 Nos 90.00
8227 Stainless steel fancy handle 10 Nos 1000.00
8228 Soft closing stainless steel hinges 10 Sets 1550.00
8229 Stainless steel telescopic drawer channels 500mm long set 535.00
8230 Stainless steel (Grade-304) basket (readymade) kg 260.00
8647 Stainless steel screws 30 mm x4 mm 100 Nos 35.84
8678 1 mm thick 35 mm wide bright finished stainless steel piano hinges
metre 47.04

8699 8 mm thick tapered edge calcium silicate board sqm 270.00

8700 10 mm thick calcium silicate board sqm 420.00
8703 Telescopic drawer channels 300 mm long set 240.00
8704 Stainless steel roller for sliding arrangement in racks/ cupboards/ cabinets
shutter each 11.00

8705 50 mmX42 mmX2 mm thick Factory made door frame of PVC extruded
sections in white, grey or wooden finish metre 166.00

8706 25 mm thick factory made PVC flush door shutter i/c carriage sqm 1700.00
8707 Factory made glass reinforced plastic door frame 90x45 mm i/c carriage
metre 480.00

8708 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c
carriage sqm 2326.00

8709 30 mm thick factory made solid PVC profile panelled door single piece
extruded profile decorative finish (wood grain printed on both side)

sqm 2100.00
8710 Factory made solid PVC door frame 60 x 30 mm i/c carriage metre 315.00
8711 20 mm factory made solid PVC panel door shutter i/c carriage sqm 2050.00
8712 30 mm thick factory made solid PVC profile panelled door single piece
extruded profile non decorative finish sqm 2000.00

8713 Fiber glass reinforced plastic chajja sqm 3000.00

8714 Magnetic catcher triple strip vertical type each 28.00

8715 Magnetic catcher double strip horizontal type each 20.00

8716 100 mm mortice lock with 6 levers for aluminium door each 432.00
8719 2nd class teak wood moulded beading or Taj beading/ornamental bleading of
size 18X5 mm metre 30.00

8720 Ceiling sections 0.55 mm thick having a knurled web of 51.55 mm and two
flanges of 26 mm each with lips of 10.55 mm metre 38.00

8721 Perimeter channel having one flange of 20 mm and another flange of 30 mm

with thickness of 0.55 mm and web of length 27 mm metre 23.00

8722 Nylon sleeves & wooden screws (40 mm) each 2.60
8723 Counter sunk ribbed head screw 25 mm 100 Nos 76.00
8724 12 mm thick marine plywood conforming to IS: 710 sqm 720.00
8725 12 mm thick fire retardant plywood conforming to IS: 5509 sqm 867.00
8726 1.5 mm thick decorative laminated sheet sqm 380.00
8727 1.0 mm thick decorative laminated sheet sqm 294.00
8730 30 mm thick factory made glass fiber reinforced plastic flush door shutter i/c
carriage sqm 2675.00

8734 P.V.C. Single piece extruded door frame of profile size 50 mm x 47mm with
wall thickness of 5 mm metre 265.00

8735 35 mm thick factory made solid panel PVC door shutter of single piece
extruded profile non decorative finished (Matt finished) sqm 2295.00

8736 35 mm thick factory made solid panel PVC door shutter of single piece
extruded profile decorative finished (wood grain finished) sqm 2707.00

8737 Stainless steel wire guage (Grade-304) aperture 1.4 mm and 0.50mm dia wire
sqm 413.00

8738 Factory made door frame fire rated (60 minutes) made with
16 SWG G.I. Sheet of section 143 mm x 57 mm duly filled with vermuculite
based concrete mix
metre 1062.00
8739 Fire rated door shuttere made with 16 SWG G.I. sheet (60 minutes) without
panel sqm 4702.00

8740 Fire seal Putty kg 304.00

8741 Clear fire resistant glass panes 6mm thick (60 minutes) sqm 21500.00
8742 G.I. U beading of 16 SWG G.I. sheet (zinc coating >120gm/ m²) with ceramic
tape of suitable thickness and fire resistant primer coating

metre 303.00
8743 Matrix Mineral Board metre 70.00
8744 Panic Bar / latch (Double point) each 5200.00
8745 65 mm x 55 mm x 2 mm thick Factory made door frame of PVC extruded
section in white, grey or wooden finish metre 364.00

8746 37 mm thick Factory made shutter with style,rails and panels of PVC extruded
section in white or grey finish i/c carriage sqm 2479.00

8747 75 mm x 53 mm x 2.0 mm thick Factory made door frame of PVC extruded

section in white, grey or wooden finish metre 413.00

8748 37 mm thick Factory made fusion welded shutter with style, rails and panels of
PVC extruded section in wooden finish sqm 2703.00

8749 Zinc alloy (white powder coated) touch lock with hook for wire mesh shutter
each 133.00

8750 Zinc alloy (white powder coated) casement handle for uPVC window/door
each 130.00

8751 Zinc alloy (white powder coated) touch lock withhook for uPVC window/door
each 114.00

8752 Zinc alloy body with single nylon roller (weight bearing capacity to be 40 Kg)
for uPVC sliding window each 60.00
8753 Stainless Steel (SS - 304) with adjustable double nylon roller (weight bearing
capacity to be 120 Kg) for uPVC sliding door/window

each 105.00
8754 Zinc alloy (white powder coated) cresent lock for uPVC sliding door/window
each 110.00

8755 Stainless steel friction hinge of size 200 mm x 19 x 1.9 mm for uPVC windows
each 212.00

8756 Stainless steel friction hinge of size 250 mm x 19 x 1.9 mm for uPVC windows
each 237.00

8757 Stainless steel friction hinges (SS-304 grade) size 300 x 19 x

1.9 mm for uPVC window each 260.00

8758 Stainless steel friction hinges (SS-304 grade) size 350 x 19 x

1.9 mm for uPVC window each 361.00

8759 Stainless steel friction hinges (SS-304 grade) size 400 x 19 x

1.9 mm for uPVC window each 365.00

8760 Glass panes of required thickness having 60 minutes of fire resis- tance both
integrity and radiation control (EI 60) and minimum 20 minutes of insulation
(EI 20)
sqm 22500.00
8772 Aluminium Track on bottom rail for uPVC window metre 37.00
8773 Wool pile/ weather pile strip for uPVC sliding window metre 20.00
8774 Aluminium Grill as per IS 1868 kg 279.00
8775 Steel Galvanised tubular reinforcement for uPVC door/ window metre 62.00
8776 Stainless steel dash fastener of 8 mm dia and 75 mm long bolt each 17.00
8777 GI Fastener 100x8 mm each 15.00
9977 Carriage L.S. 2.12
9988 Carriage and sundries L.S. 2.12
9999 Sundries L.S. 2.12

9.0 WOOD AND P. V. C. WORK

Code Description Unit Rate
No.

FRAMES AND TRUSSES

9.1 Providing wood work in frames of doors, windows, clerestory windows

and other frames, wrought framed and fixed in position with hold fast
lugs or with dash fasteners of required dia & length (hold fast lugs or
dash fastener shall be paid for separately).
9.1.1 Second class teak wood cum 131576.95
9.1.2 Sal wood cum 106720.85
 9.1.3 Kiln seasoned and chemically treated hollock wood cum 74199.70
9.2 Providing laminated veneer lumber conforming to IS:14616 and TAD -15:
2001 (Part B) in factory made frames of doors, windows, clerestory
windows and other frames, wrought framed and fixing in position with
hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or
dash fastener shall be paid for separately). cum 115052.20

9.3 Providing wood work in frames of false ceiling, partitions etc. sawn and
fixed in position with necessary stainless steel screws etc.
9.3.1 Sal wood cum 97078.35
9.3.2 Kiln seasoned and chemically treated hollock wood cum 64332.20
9.4 Extra for additional labour for circular works, such as in frames of fan
light
9.4.1 Second class teak wood cum 13157.80
9.4.2 Sal wood cum 10672.20
9.4.3 Kiln seasoned and chemically treated hollock wood cum 7420.30
9.5 Providing and fixing panelled or panelled and glazed shutters for doors,
windows and clerestory windows, fixing with butt hinges of required
size with necessary screws, excluding panelling which will be paid for
separately, all complete as per direction of Engineer-in-charge. (Note:-
Butt hinges and necessary screws shall be paid separately)
9.5.1 Second class teak wood
9.5.1.1 35 mm thick shutters sqm 3704.45
9.5.1.2 30 mm thick shutters sqm 3360.70
9.5.2 Kiln seasoned and chemically treated hollock wood
9.5.2.1 35 mm thick shutters sqm 2511.95
9.5.2.2 30 mm thick shutters sqm 2333.50
9.5.3 Kiln seasoned selected planks of sheesham wood
9.5.3.1 35 mm thick shutters sqm 3259.05
9.5.3.2 30 mm thick shutters sqm 2976.40
9.6 Providing and fixing 35 mm thick factory made laminated veneer lumber
door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing
with butt hinges of required size with necessary screws, all complete
as per directions of Engineer- in-charge and panelling with panels of :
(Note:- Butt hinges and necessary screws shall be paid separately)
9.6.1 12 mm thick plain grade -1, medium density flat pressed three layer
particle board FPT - I or graded wood particle board FPT- I, IS : 3087 marked,
bonded with BWP type synthetic resin adhesive as per IS : 848 :

sqm 2682.05
 9.6.2 12 mm thick pre-laminated particle board (decorative lamination
on both sides) grade -1, medium density flat pressed, three layer particle
board FPT- I or graded wood particle board FPT- I, conforming to IS : 3087,
bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-
laminated conforming to IS : 12823, Grade 1, Type - II marked :

sqm 2815.85
9.6.3 12 mm thick one side Pre-laminated particle board (decorative
lamination on one side and other sides balancing lamination) grade -1,
medium density flat pressed, three layer particle board FPT - I or graded wood
particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic
resin adhesive as per IS : 848 and pre-laminated conforming to IS : 12823,
Grade -1, Type II marked :

sqm 3070.05
9.7 Providing and fixing panelling or panelling and glazing in panelled or
panelled and glazed shutters for doors, windows and clerestory windows
(Area of opening for panel inserts excluding portion inside grooves or
rebates to be measured). Panelling for panelled or panelled and glazed
shutters 25 mm to 40 mm thick :
9.7.1 Second class teak wood sqm 2998.30
9.7.2 Kiln seasoned and chemically treated hollock wood sqm 2039.80
9.7.3 Ply wood 5 ply, 9 mm thick
9.7.3.1 Decorative plywood both side decorative veneer (Type -
I) conforming to IS 1328 BWR type sqm 2366.35

9.7.3.2 Decorative plywood one side decorative veneer and

commercial veneer on other face (Type 1) conforming to IS 1328
BWR Type
sqm 2400.40
9.7.4 Ply wood 7 ply, 9 mm thick
9.7.4.1 Decorative plywood one side decorative veneer and
commercial veneer on other face (Type 1) conforming to IS 1328
BWR Type
sqm 2570.70
9.7.5 Particle Board 12 mm thick
9.7.5.1 Plain particle board flat pressed, 3 layer or graded wood
particle board medium density Grade I, IS : 3087 marked

sqm 1399.80
9.7.5.2 Veneered flat pressed three layer or graded wood
particle board with commercial veneering on both sides conforming to sqm 1711.15
IS:3097, grade I
9.7.5.3 Pre-laminated particle board with decorative
lamination on one side and balancing lamination on other side, Grade
I, Type II IS: 12823 marked
sqm 1743.60
9.7.5.4 Pre-laminated particle board with decorative
lamination on both sides, Grade I, Type II, IS:12823 marked

sqm 1727.40
 9.7.6 Coir Veneer Board (conforming to IS 14842)
9.7.6.1 12 mm thick sqm 1946.30
9.7.7 Float glass panes

9.7.7.1 4 mm thick glass pane (weight not less than

10kg/sqm). sqm 1897.10

9.7.7.2 5.0 mm thick glass panes (weight not less than 12.50
kg/sqm). sqm 2231.20

9.7.8 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire
and 1.4mm wide aperture with matching wood beading
sqm 1521.60

9.9 Providing and fixing glazed shutters for doors, windows and clerestory
windows using 4 mm thick float glass panes, including ISI marked M.S.
pressed butt hinges bright finished of required size with necessary
screws.
9.9.1 Second class teak wood
9.9.1.1 35 mm thick sqm 4458.40
9.9.1.2 30 mm thick sqm 4065.50
9.9.2 Kiln seasoned and chemically treated hollock wood
9.9.2.1 35 mm thick sqm 3100.55
9.9.2.2 30 mm thick sqm 2896.60
9.9.3 Kiln seasoned selected planks of sheesham wood
9.9.3.1 35 mm thick sqm 3951.85
9.9.3.2 30 mm thick sqm 3628.80
9.10 Providing and fixing factory made laminated veneer lumber glazed shutter
conforming to IS: 14616 and TADS 15:2001 (Part B), using 4 mm thick
float glass panes for doors, windows and clerestory windows, fixing
with butt hinges of required size with necessary screws, all as per
directions of Engineer-in-charge (Note:- Butt hinges and necessary
screws shall be paid separately)
9.10.1 30 mm thick shutters sqm 2682.05
9.11 Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows
and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured)
9.11.1 5.0 mm thick instead of 4 mm thick. sqm 275.60

9.12 Extra for providing frosted glass panes 4 mm thick instead of ordinary
float glass panes 4 mm thick in doors, windows and clerestory window
shutters. (Area of opening for glass panes excluding portion inside rebate
shall be measured). sqm 148.50

9.13 Deduct for providing pin headed glass panes instead of ordinary float
glass panes weighing 4 mm thick in doors, windows and clerestory
windows shutters (Area of opening for glass panes excluding portion inside
rebate shall be measured). sqm 48.15
 9.14 Extra for providing ISI marked Stainless Steel butt hinges instead of
M.S. pressed butt hinges bright finished of required size with necessary
screws. (Shutter area to be measured). sqm 147.15

9.15 Deduct for not providing hinges in doors, windows or clerestory window
shutters with :
9.15.1 Stainless steel butt hinges with stainless steel screws :
9.15.1.1 For 2nd class teak wood and other class of wood
shutters sqm 202.55

9.15.2 ISI marked M.S. pressed butt hinges bright finished of required size.
9.15.2.1 For 2nd class teak wood and other class of wood
shutters sqm 55.40
9.16 Providing and fixing 25 mm thick shutters for cup board etc. :
9.16.1 Panelled or panelled & glazed shutters :

9.16.1.1 Second class teak wood including ISI marked

anodised aluminium butt hinges with necessary
screws sqm 3918.85
9.16.1.2 Second class teak wood including iSi marked
nickel plated bright finished M.S. piano hinges with necessary screws

sqm 4061.20
Glazed shutters :
9.16.2.1 Second class teak wood including ISI marked anodized
aluminium butt hinges with necessary screws
sqm 3751.10

9.16.2.2 Second class teak wood including ISI marked nickel

plated bright finished M.S. piano hinges
with necessary screws
sqm 3791.20
9.16.2
9.17 Providing and fixing flat pressed 3 layer particle board medium density
exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame,
backing or studding with screws etc. complete (Frames, backing or studding to be
paid separately):
9.17.1 12 mm thick sqm 667.10
9.17.2 18 mm thick sqm 869.10
9.18 Providing and fixing Pre-laminated flat pressed 3 layer (medium density)
particle board or graded wood particle board IS : 3087 marked, with one
side decorative and other side balancing lamination Grade I, Type II
exterior grade IS : 12823 marked, in shelves with screws and fittings
wherever required, edges to be painted with polyurethane primer (fittings
to be paid separately).
9.18.1 18 mm thick sqm 1089.30
9.18.2 25 mm thick sqm 1501.00
9.20 Providing and fixing ISI marked flush door shutters conforming to IS :
2202 (Part I) decorative type, core of block board construction with
 frame of 1st class hard wood and well matched teak 3 ply veneering
with vertical grains or cross bands and face veneers on both faces of
shutters.
9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with
necessary screws sqm 3086.10

9.20.2 30 mm thick including ISI marked Stainless Steel butt hinges with
necessary screws sqm 2818.50

9.20.3 25 mm thick (for cupboard) including ISI marked nickel plated bright
finished M.S. Piano hinges IS : 3818 marked with necessary screws

sqm 2512.35
9.21 Providing and fixing ISI marked flush door shutters conforming to IS :
2202 (Part I) non-decorative type, core of block board construction with
frame of 1st class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face veneers on both
faces of shutters:
9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with
necessary screws sqm 2015.75

9.21.2 30 mm thick including ISI marked Stainless Steel butt hinges with
necessary screws sqm 1881.95

9.21.3 25 mm thick (for cupboard) including ISI marked nickel plated bright
finished M.S. piano hinges with necessary screws sqm 1830.00

9.22 Extra for Providing and fixing flush doors with decorative veneering instead
of non decorative ISI marked flush door shutters conforming to IS: 2202
(Part I)
9.22.1 On one side only sqm 408.05
9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm
minimum depth on all edges of flush door shutters (over all area of door
shutter to be measured). sqm 401.40

9.24 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush
doors (cost of glass excluded) (overall area of door shutter to be
measured):
9.24.1 Rectangular or square sqm 173.95
9.24.2 Circular sqm 180.60
9.25 Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters
(overall area of door shutters to be measured).
9.25.1 Decorative type door sqm 354.55
9.26 Extra for cutting rebate in flush door shutters (Total area of the shutter to be
measured). sqm 93.65

9.27 Providing and fixing wire gauge shutters using galvanized M.S. wire
gauge of average width of aperture 1.4 mm in both directions with wire
of dia 0.63 mm, for doors, windows and clerestory windows with hinges
and necessary screws :
9.27.1 35 mm thick shutters
 9.27.1.1 with ISI marked M.S. pressed butt hinges bright
finished of required size
9.27.1.1.1 Second class teak wood sqm 4342.30
9.27.1.1.2 Kiln seasoned and chemically treated hollock
wood sqm 3140.15

9.27.1.1.3 Kiln seasoned selected class of sheesham

wood sqm 3893.35

9.27.1.2 With ISI marked stainless steel butt hinges of

required size
9.27.1.2.1 Second class teak wood sqm 4489.45
9.27.1.2.2 Kiln seasoned and chemically treated
hollock wood sqm 3287.30

9.27.1.2.3 Kiln seasoned selected class of

sheesham wood sqm 4040.55

9.27.2 30 mm thick shutters

9.27.2.1 with ISI marked M.S. pressed butt hinges bright

finished of required size
9.27.2.1.1 Second class teak wood sqm 3863.65
9.27.2.1.2 Kiln seasoned and chemically treated hollock
wood sqm 2834.60

9.27.2.1.3 Kiln seasoned selected class of

sheesham wood sqm 3479.40

9.27.2.2 With ISI marked stainless steel butt hinges of required size
9.27.2.2.1 Second class teak wood sqm 4010.85
9.27.2.2.2 Kiln seasoned and chemically treated hollock
wood sqm 2981.75

9.27.2.2.3 Kiln seasoned selected class of sheesham

wood sqm 3626.55

9.31 Providing and fixing wire gauge laminated veneer lumber shutters
conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using
galvanised wire gauge with average width of aperture 1.4 mm in both
directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and
clerestory windows, fixing with butt hinges of required size with necessary
screws, as per directions of Engineer-in-charge: (Note:- Butt hinges and
necessary screws shall be paid separately)
 9.31.1 35 mm thick shutters sqm 2682.05
9.31.2 30 mm thick shutters sqm 2427.85
MISCELLANEOUS-WOOD WORK

9.40 Providing and fixing wooden moulded beading to door and window frames
with iron screws, plugs and priming coat on unexposed surface etc. complete :

9.40.1 2nd class teak wood

9.40.1.1 50x12 mm metre 191.55
9.40.1.2 50 x 20 mm metre 239.20
9.40.2 Kiln seasoned and chemically treated hollock wood
9.40.2.1 50x12 mm metre 157.85
9.40.2.2 50x20 mm metre 183.05
9.41 Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames
to be paid separately), including fixing 50x12 mm beading complete with :

9.41.1 Second class teak wood sqm 2622.20

9.42 Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer
or graded wood particle board medium density grade I, IS : 3087 marked,
including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR
grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel
plated brackets, including fixing with 25x3 mm
M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size
100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm
long etc. all complete.

metre 511.55
9.43 Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer
board ISI marked IS : 14842, including top cover of 6 mm coir veneer board, nickle plated
M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing
with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm
x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all
complete.

metre 626.55
9.44 Extra for using veneered particle board conforming to IS 3097 Grade I, in item
of pelmet 18mm thick 150mm wide.

9.44.1 Non decorative veneer on both sides metre 33.20

9.44.2 Particle board with decorative veneering on both sides metre 107.05
9.45 Providing and fixing teak wood lipping of size 25x3 mm in pelmet. metre 61.50
9.46 Providing and fixing chromium plated brass curtain rod having wall thickness of
1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC
sleeves etc., wherever necessary complete :

9.46.1 12 mm dia metre 274.90

 9.46.2 20 mm dia metre 375.25
9.46.3 25 mm dia metre 482.30
9.47 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated
brackets :

9.47.1 20 mm dia (heavy type) metre 152.65

9.47.2 25 mm dia (heavy type) metre 159.35
9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with
M.S. flats, square or round bars etc. including priming coat with approved steel primer all
complete.

9.48.1 Fixed to steel windows by welding kg 181.00

9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. kg 197.70
9.49 Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and
1.6mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and
priming coat with approved steel primer all complete.

sqm 1277.65
9.50 Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not
less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second
class teak wood and priming coat with approved steel primer all complete.

sqm 1484.70
9.51 Providing and fixing fly proof galvanized M.S. wire gauge to windows and
clerestory windows using wire gauge with average width of aperture
1.4 mm in both directions with wire of dia 0.63 mm all complete.

9.51.1 With 2nd class teak wood beading 62X19 mm sqm 1164.90
9.51.2 With 12 mm mild steel U beading sqm 812.40
9.52 Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not
less than 7.75 Kg per sqm in panelled and glazed door and window shutter
instead of glass sheet 4 mm thick. sqm 161.90

9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to
frame with 10 mm diameter bolts, nuts and wooden plugs and embedding
in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6
graded stone aggregate 20mm nominal size). each 194.35

9.54 Providing beams including hoisting, fixing in position and applying wood
preservative for the unexposed surfaces, etc. complete with :
9.54.1 Sal wood cum 95406.90
9.54.2 Hollock wood cum 62238.25

BRIGHT FINISHED M.S. FITTINGS

9.55 Providing and fixing ISI marked M.S. pressed butt hinges bright finished
with necessary screws etc. complete :
9.55.1 125x65x2.12 mm each 48.00
9.55.2 100x58x1.90 mm each 39.05
9.55.3 75x47x1.70 mm each 32.75
9.55.4 50x37x1.50 mm each 16.35
9.56 Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges
with necessary screws etc. complete :
9.56.1 125x90x4.00 mm each 60.70
9.56.2 100x75x3.50 mm each 52.40
9.56.3 75x60x3.10 mm each 40.00
9.56.4 50x40x2.50 mm each 21.80
Note: - In coastal areas, M.S. heavy weight butt hinges or stainless steel
hinges shall be used.

COPER OXIDISED MILD STEEL FITTINGS (COPPER OXIDISED AS PER

IS: 1378)

9.57 Providing and fixing ISI marked oxidised M.S. pressed butt hinges with
necessary screws etc. complete.

9.57.1 125x65x2.12 mm each 47.05

9.57.2 100x58x1.90 mm each 40.60
9.57.3 75x47x1.70 mm each 34.30
9.57.4 50x37x1.50 mm each 16.95
9.58 Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges
with necessary screws etc. complete :

9.58.1 150x125x27x2.80 mm each 77.70

9.58.2 125x125x27x2.80 mm each 73.00

9.58.3 100x125x27x2.80 mm each 64.30

9.58.4 75x100x20x2.24 mm each 56.90

9.59 Providing and fixing ISI marked oxidised M.S. single acting spring hinges
with necessary screws etc. complete :

9.59.1 150 mm each 251.70

9.59.2 125 mm each 224.95
9.59.3 100 mm each 196.70

9.60 Providing and fixing oxidised M.S. double acting spring hinges with
necessary screws etc. complete.

9.60.1 150 mm each 278.45

9.60.2 125 mm each 251.70
9.60.3 100 mm each 223.45

9.61 Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel
plating and fixing with necessary screws etc., complete.
9.61.1 Overall width 35 mm metre 282.95
9.61.2 Overall width 50 mm metre 282.95
9.61.3 Overall width 65 mm metre 299.00
9.62 Providing and fixing ISI marked oxidised M.S. sliding door bolts with
nuts and screws etc. complete :
9.62.1 300x16 mm each 180.55
9.62.2 250x16 mm each 165.90

9.63 Providing and fixing ISI marked oxidised M.S. tower bolt black finish,
(Barrel type) with necessary screws etc. complete :

9.63.1 250x10 mm each 74.65

9.63.2 200x10 mm each 61.05
9.63.3 150x10 mm each 53.05
9.63.4 100x10 mm each 39.10

9.64 Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock
conforming to IS : 7534 with necessary screws bolts, nut and washers
etc. complete. each 108.65

9.65 Providing and fixing ISi marked oxidised M.S. door latches conforming
to IS:5930 with screws etc. complete :
9.65.1 300x20x6 mm each 82.40
9.65.2 250x20x6 mm each 69.00

9.66 Providing and fixing ISI marked oxidised M.S. handles conforming to
IS:4992 with necessary screws etc. complete :

9.66.1 125 mm each 35.20

9.66.2 100 mm each 28.25
9.66.3 75 mm each 24.25

9.67 Providing and fixing oxidised M.S. hasp and staple (safety type)
conforming to IS : 363 with necessary screws etc. complete :

9.67.1 150 mm each 29.15

9.67.2 115 mm each 26.00
9.67.3 90 mm each 22.10

9.68 Providing and fixing oxidised M.S. casement stays (straight peg type)
with necessary screws etc. complete.

9.68.1 300 mm weighing not less than 200 grams each 59.25
9.68.2 250 mm weighing not less than 150 grams each 51.90
9.68.3 200 mm weighing not less than 120 grams each 45.20

9.69 Providing and fixing oxidised M.S. Safety chain with necessary
fixtures for doors, (weighting not less than 450 gms) each 88.95

STAINLESS STEEL FITTINGS

9.70 Providing and fixing IS : 12817 marked stainless steel butt hinges with
stainless steel screws etc. complete :
9.70.1 125x64x1.90 mm each 95.50
9.70.2 100X58X1.90 mm each 86.15
9.70.3 75x47x1.80 mm each 64.20
9.70.4 50x37x1.50 mm each 36.00
9.71 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. co
9.71.1 125x64x2.50 mm each 104.20
9.71.2 100x60x2.50 mm each 85.45
9.71.3 75x50x2.50 mm each 70.90
BRASS FITTINGS

9.72 Providing and fixing bright finished brass butt hinges with necessary
screws etc. complete :

9.72.1 125x85x5.5 mm (heavy type) each 228.90

9.72.2 125x70x4 mm (ordinary type) each 157.45
9.72.3 100x85x5.5 mm (heavy type) each 175.70
9.72.4 100x70x4 mm (ordinary type) each 125.90
9.72.5 75x65x4 mm (heavy type) each 147.45

9.72.6 75x40x2.5 mm (ordinary type) each 86.15

9.72.7 50x40x2.5 mm (ordinary type) each 34.75

9.73 Providing and fixing bright finished brass parliamentary hinges with
necessary screws etc. complete :

9.73.1 150x125x27x5 mm each 394.95

9.73.2 125x125x27x5 mm each 353.45
9.73.3 100x125x27x5 mm each 325.35
9.73.4 75x100x20x3.2 mm each 288.95

9.74 Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete :
9.74.1 250x10 mm each 374.35
9.74.2 200x10 mm each 300.55
9.74.3 150x10 mm each 232.30
9.74.4 100x10 mm each 160.30
9.75 Providing and fixing bright finished brass door latch with necessary screws

etc. complete :
9.75.1 300x16x5 mm each 273.20
9.75.2 250x16x5 mm each 259.80
9.76 Providing and fixing bright finished brass 100 mm mortice latch and lock
with 6 levers and a pair of lever handles of approved quality with necessary
screws etc. complete. each 723.80
9.77 Providing and fixing bright finished brass 100 mm mortice latch with one
dead bolt and a pair of lever handles of approved quality with necessary
screws etc. complete. each 603.40
9.78 Providing and fixing bright finished brass night latch of approved quality
including necessary screws etc. complete.
each 1004.80
9.79 Providing and fixing special quality bright finished brass cupboard or ward robe
locks with four levers of approved quality including necessary screws etc. complete.

9.79.1 40 mm each 264.90

9.79.2 50 mm each 306.40
9.79.3 65 mm each 313.05
9.79.4 75 mm each 333.15
9.80 Providing and fixing 50 mm bright finished brass cup board or wardrobe
knob of approved quality with necessary screws. each 63.65

9.81 Providing and fixing bright finished brass handles with screws etc. complete:
9.81.1 125 mm each 205.10
9.81.2 100 mm each 189.85
9.81.3 75 mm each 149.70
9.82 Providing and fixing bright finished brass hanging type floor door stopper with
necessary screws, etc. complete. each 109.60

9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic
door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight
upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc.
complete.
each 1025.65
9.84 Providing and fixing aluminium extruded section body tubular type
universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the
body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with
double speed adjustment with necessary accessories and screws etc. complete.

each 856.30
9.85 Providing and fixing bright finished brass casement window fastener with
necessary screws etc. complete. each 76.30

9.86 Providing and fixing bright finished brass casement stays (straight peg type)
with necessary screws etc. complete :
9.86.1 300 mm weighing not less than 330 gms each 186.80
 9.86.2 250 mm weighing not less than 280 gms each 149.90
9.86.3 200 mm weighing not less than 240 gms each 143.20
9.87 Providing and fixing bright finished brass hasp and staple (safety type) with
necessary screws etc. complete :
9.87.1 150 mm each 118.60
9.87.2 115 mm each 107.45
9.87.3 90 mm each 94.75
CHROMIUM PLATED BRASS FITTINGS
9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock
with 6 levers and a pair of lever handles of approved quality with necessary screws etc.
complete.
each 817.50
9.89 Providing and fixing chromium plated brass night latch of approved quality
including necessary screws etc. complete. each 857.60

9.90 Providing and fixing special quality chromium plated brass cupboard locks with
six levers of approved quality including necessary screws etc. complete.

9.90.1 Size 40 mm each 272.95

9.90.2 Size 50 mm each 286.30
9.90.3 Size 65 mm each 321.10
9.90.4 Size 75 mm each 355.90
9.91 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe
knobs with nuts complete. each 122.50

9.92 Providing and fixing chromium plated brass handles with necessary screws
etc. complete:

9.92.1 125 mm each 226.50

9.92.2 100 mm each 199.20
9.92.3 75 mm each 179.15
9.93 Providing and fixing chromium plated brass casement window fastener with
necessary screws etc. complete. each 140.80

9.94 Providing and fixing chromium plated brass casement stays (straight peg type)
with necessary screws etc. complete :

9.94.1 300 mm weighing not less than 330 gms each 207.70
9.94.2 250 mm weighing not less than 280 gms each 180.95
9.94.3 200 mm weighing not less than 240 gms each 154.15

ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL BE ISI

MARKED)

9.95 Providing and fixing ISI marked aluminium butt hinges anodised (anodic
coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc.
complete:

9.95.1 125x75x4 mm each 138.55

9.95.2 125x63x4 mm each 116.20
 9.95.3 100x75x4 mm each 106.85
9.95.4 100x63x4 mm each 97.60
9.95.5 100x63x3.2 mm each 90.40
9.95.6 75x63x4 mm each 79.05
9.95.7 75x63x3.2 mm each 72.45
9.95.8 75x45x3.2 mm each 68.45
Note :- Aluminum hinges shall not be used in wooden shutters, stainless steel
hinges shall be preferred.

9.96 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic
coating not less than grade AC 10 as per IS : 1868), transparent or dyed to
required colour or shade, with nuts and screws etc. complete :

9.96.1 300x16 mm each 260.30

9.96.2 250x16 mm each 234.90

9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc
complete :
9.97.1 300x10 mm each 117.65
9.97.2 250x10 mm each 104.40
9.97.3 200x10 mm each 90.80
9.97.4 150x10 mm each 75.55
9.97.5 100x10 mm each 58.65
9.98 Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour
and shade, with necessary screws bolts, nut and washers etc. complete.

each 89.90
9.99 Providing and fixing 50 cm long aluminium kicking plate of size 100x3.15 mm,
anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed
to required colour or shade, with necessary screws etc. complete.

each 212.85
9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating
not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or
shade, with necessary screws etc. complete :
 9.100.1 125 mm each 60.05
9.100.2 100 mm each 53.25
9.100.3 75 mm each 46.30
9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked,
anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed
to required colour and shade, with necessary screws etc. complete.

9.101.1 Single rubber stopper each 35.50

9.101.2 Twin rubber stopper each 62.25
9.102 Providing and fixing aluminium casement stays, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour
and shade, with necessary screws etc. complete.

each 64.55
9.103 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI
marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10
as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc.
complete.

each 739.80
9.104 Providing and fixing aluminium tee channels (heavy duty) with rollers & stop
end in pelmets as curtain rod. metre 139.70

GYPSUM BOARD PARTITIONS

9.105 Providing and fixing partition upto ceiling height consisting of G.I. frame
and required board, including providing and fixing of frame work made of
special section power pressed/ roll form G.I. sheet with zinc coating of
120 gms/sqm(both side inclusive), consisting of floor and ceiling channel
50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to
the floor and ceiling at the spacing of 610 mm centre to centre with
dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor
fastener or metal screws with nylon plugs and the studs 48 mm wide
having one flange of 34 mm and other flange 36 mm and 0.50 mm thick
fixed vertically within flanges of floor and ceiling channel and placed at
a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,
including fixing of studs along both ends of partition fixed flush to wall
with suitable anchor fastener or metal screws with nylon plugs at spacing
of 450 mm centre to centre, and fixing of boards to both side of frame
work by 25 mm long dry wall screws on studs, floor and ceiling channels
at the spacing of 300 mm centre to centre. The boards are to be fixed to
the frame work with joints staggered to avoid through cracks, M.S.
fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5
mm each) to be provided at the horizontal joints of two boards, fixed to
the studs using metal to metal flat head screws, including jointing and
finishing to a flush finish with recommended jointing compound, jointing
tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher
and two coats of primer suitable for board as per manufacture's
specification and direction of engineer in charge all complete.
 9.105.1 75 mm overall thickness partition with 12.5 mm thick double skin fire
rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095:
part 3 (Board with BIS certification marks)

sqm 1797.65
9.105.2 75mm overall thickness partition with 12.5 mm thick double skin
tapered edged plain Gypsum plaster board conforming to IS: 2095: (part I):
2011 (Board with BIS certification marks)
sqm 1530.05
9.105.3 66mm overall thickness Partition with 8mm thick double skin Calcium
Silicate Board made with Calcareous & Siliceous materials reinforced with
cellulose fiber manufactured through autoclaving process with Compressive
Strength 225 kg/sq.cm, Bending Strength 100 kg./ sq.cm

sqm 1877.90
9.105.4 66mm overall thickness partition using 8mm thick double skin
multipurpose cement board reinforced with cellulose fibre manufactured
through autoclaving process (High pressure steam cured) as per IS : 14862
with suitable fibre cement screws

sqm 1744.10
9.105.5 66 mm overall thickness partition using 8 mm thick double skin
multipurpose cement bonded wood particle board manufactured as per IS:
14276 with suitable cement bonded
board screws
sqm 1730.75
9.106 Providing and fixing PTMT handles with necessary screws etc. complete.
9.106.1 125x34x24 mm weighing not less than 23 gms each 35.40
9.106.2 150x34x24 mm weighing not less than 26 gms each 35.40
9.107 Providing and fixing PTMT Butt hinges with necessary screws etc. complete.

9.107.1 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing
not less than 34 gms each 64.05

9.107.2 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing
not less than 53 gms each 76.50

9.108 Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and
necessary screws etc., complete.

9.108.1 152x42x18 mm weighing not less than 60 gms each 58.85

9.108.2 202x42x18 mm weighing not less than 78 gms each 92.75
9.109 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm
with suitable washers weighing not less than 33 gms each 34.45

9.110 Providing and fixing Bamboo jaffery/ fencing consisting of superior quality
25mm dia (Average) half cut bamboo placed vertically and fixed together with three
numbers horizontal running members of hollock wood in scantling of section 50X25 mm,
fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-
charge.

sqm 600.15
9.111 Providing and fixing wooden moulded corner beading of triangular shape to the
junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface
etc. complete 2nd class teak wood.

9.111.1 50x50 mm (base and height) metre 310.40

9.112 Providing and fixing 2nd class teak wood lipping/ moulded beading or taj
beading of size 18X5 mm fixed with wooden adhesive of approved quality and
screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-
in-charge.
metre 85.60
9.113 Providing and fixing bright finished 100 mm mortice lock with 6 levers without
pair of handles of approved quality for aluminium door, with necessary screws etc
each 721.75
complete as per direction of Engineer- in-charge.

9.114 Providing and fixing magnetic catcher of approved quality in cupboard / ward
robe shutters, including fixing with necessary screws etc. complete.

9.114.1 Triple strip vertical type each 44.85

9.114.2 Double strip (horizontal type) each 34.15
9.115 Providing and fixing powder coated telescopic drawer channels 300 mm
long with necessary screws etc. complete as per directions of Engineer- in-charge.
one set 355.05
9.116 Providing and fixing sliding arrangement in racks/ cupboards/cabinets
shutter by with stainless steel rollers to run inside C or E aluminium
channel section (The payment of C or E channel shall be made separately)
each 17.65

9.117 Providing and fixing factory made uPVC door frame made of uPVC
extruded sections having an overall dimension as below (tolerance
±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door
frame to be Jointed with galvanized brackets and stainless steel screws,
joints mitred and Plastic welded. The hinge side vertical of the frames
reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1
mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame
complete as per manufacturer’s specification and direction of Engineer-
in-charge
9.117.1 Extruded section profile size 48x40 mm metre 232.55
9.117.2 Extruded section profile size 42x50 mm metre 280.70
9.118 Providing and fixing to existing door frames.
9.118.1 24 mm thick factory made PVC door shutters made of styles
and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on bot
The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm
having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanise
tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow se
size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S
cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having ove
thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by ins
horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's
specification and direction of Engineer-in-charge. (For W.C. and bathroom door
shutter). sqm 1790.65
9.118.2 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow
section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side
styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm ha
wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. t
size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of
100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the
shutter styles by means of plastic/ galvanised M.S. 'U' cleats.

The shutter frame filled with a uPVC multi-chambered single

panel of size not less than 620 mm, having over all thickness of 20
mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically
and tie bar at two places by inserting horizontally 6 mm galvanised
M.S. rod and fastened with nuts and washers, complete as per
manufacturer's specification and direction of Engineer-in-charge.

sqm 2008.55
 9.118.3 25 mm thick PVC flush door shutters made out of a one piece Multi
chamber extruded PVC section of the size of 762 mm X 25 mm or less as
per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC
foam end cap of size 23x10 mm are provided on both vertical edges to ensure
the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm
and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of
the door shutter should be filled with High Density Polyurethane foam. The
Top & Bottom edges of the shutter are covered with an end-cap of the size 25
mm X 11 mm. Door shutter shall be reinforced with special polymeric
reinforcements as per manufacturer’s specification and direction of Engineer-
in-charge to take up necessary hardware and fixtures. Stickers indicating the
locations of hardware will be pasted at appropriate places

sqm 2612.20
9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm
with awall thickness of 5 mm, made out of extruded 5mm rigid PVC
foam sheet, mitred at corners and joined with 2 Nos of 150 mm long
brackets of 15x15 mm M.S. square tube, the vertical door frame profiles
to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM
rubber gasket weather seal to be provided through out the frame. The
door frame to be fixed to the wall using M.S. screws of 65/100 mm size,
complete as per manufacturer’s specification and direction of Engineer- in-
Charge. metre 408.25

9.120 Providing and fixing factory made panel PVC door shutter consisting of
frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm
x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame
shall have a coat of steel primers of approved make and manufacture.
M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of
size 30 mm thickness, 70 mm width out of which 50 mm shall be flat
and 20 mm shall be tapered in 45 degree angle on both side forming
styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm
shall be flat and 20 mm shall be tapered in 45 degree on the inner side
to form top and bottom rail and 115 mm wide PVC sheet out of which 75
mm shall be flat and 20 mm shall be tapered on both sides to form lock
rail. Top, bottom and lock rails shall be provided both side of the panel.
10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as
gap insert for top rail & bottom rail, paneling of 5 mm thick both side
PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles &
rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading
on inner side, and joined together with solvent cement adhesive. An
additional 5 mm thick PVC strip of 20 mm width is to be stuck on the
interior side of the 'C' Channel using PVC solvent adhesive etc. complete
as per direction of Engineer-in-charge, manufacturer's specification &
drawing.
9.120.1 30 mm thick plain PVC door shutters sqm 2455.10
 9.120.2 30 mm thick pre laminated PVC door shutters sqm 2455.10
9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames
of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15
mm to receive shutter of 30 mm thickness. The laminate shall be moulded
with fire resistant grade unsaturated polyester resin and chopped mat.
Door frame laminate shall be 2mm thick and shall be filled with suitable
wooden block in all the three legs. The frame shall be covered with fiber
glass from all sides. M.S. stay shall be provided at the bottom to steady
the frame. metre 702.60

9.122 Providing and fixing to existing door frames.

9.122.1 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door
shutter of required colour and approved brand and manufacture, made
with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick
FRP laminate for forming hollow rails and styles, with wooden frame and
suitable blocks of seasoned wood inside at required places for fixing of fittings,
cast monolithically with 5 mm thick FRP laminate for panels conforming to IS:
14856, including fixing to frames.

sqm 3496.75
9.122.2 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter
in different plain and wood finish made with fire retardant grade
unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around,
with suitable wooden blocks inside at required places for fixing of fittings
and polyurethane foam (PUF)/Polystyrene foam to be used as filler material
throughout the hollow panel, casted monolithically with testing parameters
of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per
direction
of Engineer-in-charge.

sqm 3963.70
9.123 Providing and fixing factory made door frame (single rebate) made out of

single piece extruded solid PVC foam profile with homogenous fine
cellular structure having smooth outer integral skin having 62 mm width
& 32 mm thickness, frame will be mitred & Jointed with self driven self
tapping screws of size 38 mm x 4 mm & PVC solvent cement, including
fixing the frame to wall with suitable dia & length anchor fastener as per
manufacturer's specification and direction of Engineer-in-charge. metre 481.85

9.124 Providing and fixing factory made 30 mm thick door shutter made of
solid PVC foam profile. The styles & rails shall be of size 75 mm x 30
mm having wall thickness 5 mm. The styles, top & bottom rails shall
have one side wall thickness of 15 mm integrally extruded on the hinge
side of the profile for better screw holding power. The styles and rails
shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm,
painted with primer , all four corners of reinforcement to be welded or
sealed. Solid PVC extruded bidding (push fit type) will be set inside the
styles and the rails with a cavity, to receive single piece extruded 5mm
 PVC sheet as panel. The styles and rails will be mitred cut and joint
with the help of PVC solvent cement & self driven self tapping screws.
Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with
wall thickness 5 mm & 15 mm integrally extruded in the middle of the
lock rail & fixed with styles with the help of PVC solvent cement & self
driven self tapping screws of size 100mm x 8 mm complete as per
manufacturer's specifications and direction of Engineer-in-charge.
9.124.1 Non decorative finish sqm 3060.60
9.124.2 Decorative finish (both side wood grained finish) sqm 3194.40
9.125 Providing and fixing PVC rigid foam sheet 1 mm thick on existing door
shutters (bathroom and W.C. doors) using synthetic rubber based adhesive.
sqm 1293.05

9.126 Providing and fixing 12 mm thick panelling or panelling and glazing in

panelled or panelled and glazed shutters for doors, windows and
clerestory windows (area of opening for panel inserts excluding portion
inside grooves or rebates to be measured). Panelling for panelled or
panelled and glazed shutters 25 mm to 40 mm thick.
9.126.1 Marine plywood conforming to IS: 710 sqm 2100.40
9.126.2 Fire retardant plywood conforming to IS: 5509 sqm 2338.75
9.127 Providing & Fixing decorative high pressure laminated sheet of plain /
wood grain in gloss / matt/ suede finish with high density protective
surface layer and reverse side of adhesive bonding quality conforming
to IS : 2046 Type S, including cost of adhesive of approved quality.
9.127.1 1.5 mm thick sqm 890.55
9.127.2 1.0 mm thick sqm 764.00
9.128 Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.)
chajja 4 mm thick of required colour, size and design made by Resin
Transfer Moulding (RTM) Machine Technology, resulting in void free
compact laminate in single piece, having smooth gradual slope curvature
for easy drainage of water and duly reinforced by 2 nos vertically and 1
nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for
grouting on the existing wall along with the 50 mm flanges duly inserted
and sealed in the wall complete in one single piece casted monolithically,
including all necessary fittings . The FRP Chajja should be manufactured
using unsaturated Polyester resin as per IS: 6746, duly reinforced with
fibre glass chopped strand mat (CSM) as per IS: 11551 complete with
protective Gel coat U/V coating on Top for complete resistance from the
extreme of temperature, weather & sunlight (Only plan area of chajjas
shall be measured for making payment). sqm 4901.50

9.129 Providing and fixing cup board shutters 25 mm thick, with Pre-laminated
flat pressed three layer particle board or graded wood particle board IS:
12823 marked, exterior grade (Grade l Type ll), having one side decorative
lamination and other side balancing lamination, including IInd class teak
wood lipping of 25 mm wide x12 mm thick with necessary screws and
bright finished stainless steel piano hinges, complete as per direction
 of the Engineer-in-Charge sqm 1982.70
9.130 Providing and fixing cup board shutters with 25 mm thick veneered particle
board IS : 3097 marked, exterior grade (Grade I), of approved make,
including IInd class teak wood lipping of 25 mm wide x 12 mm thick
with necessary screws and bright finished stainless steel piano hinges,
complete as per direction of Engineer-in-Charge.
9.130.1 With decorative veneering on one side and commercial veneering on
other side sqm 1668.30

9.130.2 With non decorative veneering on both sides sqm 1567.95

9.131 Providing and fixing factory made shutters of Pre-laminated particle board flat
pressed three layer or graded wood particle board with one side
decorative finish and other side balancing lamination conforming to IS:
12823 Grade l Type ll, of approved design, and edges sealed with water
resistant paint and lipped with aluminium 'U' type edge beading all-
round the shutter, including fixing with angle cleat, grip strip, cadmium
plated steel screws, including fixing of aluminium hinges 100x63x4 mm
etc. complete as per architectural drawing and direction of Engineer-in-
Charge (Cost of 'U' beading and hinges will be paid for separately).
9.131.1 25 mm thick sqm 1559.05
9.132 Providing and fixing aluminum U beading of required size to Pre-laminated/
flush door shutter, including fixing etc. complete as per direction of
Engineer-in-charge. kg 530.30
9.133 Providing and fixing, in position concealed G.I. section for wall paneling
using board of required thickness fixed on the 'W' profile (0.55 mm
thick) having a knurled web of 51.55 mm and two flanges of 26 mm
each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel
having one flange of 20 mm and another flange of 30 mm with thickness
of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the
floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully
threaded self-tapping dry wall screws. Board is fixed to the 'W' profile
with 25 mm countersunk ribbed head screws @ 200 mm C/C., all
complete as per the drawing & directions of engineer-in-charge, the joints of
the boards are finished with specially formulated jointing
compound and 48mm wide jointing tape to provide seamless finish.
9.133.1 Tapered edge calcium silicate board made with calcareous &
siliceous materials reinforced with cellulose fiber manufactured
through autoclaving process to give stable crystalline structure with compressive strength 225 kg/ sq.cm, B
strength 100 kg/sq.cm.
9.133.1.1 10mm thick sqm 1503.50

9.133.2 Multipurpose cement board reinforced with suitable fibre

cement screw.

9.133.2.1 8 mm thick cement fibre board as per

IS : 14862 sqm 1209.10

9.133.2.2 8 mm thick Cement bonded wood particle board as per

IS:14276 sqm 1201.70
 9.133.3 Plain Gypsum plaster board conforming to IS: 2095 Part -
1:2011 (Board with BIS certification marks)
9.133.3.1 12.5 mm thick sqm 1091.30

9.134 Providing and fixing wire gauge shutters using stainless steel grade 304
wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory
windows with necessary screws :
9.134.1 35 mm thick shutters

9.134.1.1 with ISI marked M.S. pressed butt hinges

bright finished of required size

9.134.1.1.1 Second class teak wood sqm 4484.65

9.134.1.1.2 Kiln seasoned and chemically
treated hollock wood sqm 3282.50

9.134.1.1.3 Kiln seasoned selected class of sheesham

wood sqm 4035.75

9.134.1.2 With ISI marked stainless steel butt hinges of

required size

9.134.1.2.1 Second class teak wood sqm 4631.80

9.134.1.2.2 Kiln seasoned and chemically treated
hollock wood sqm 3429.70

9.134.1.2.3 Kiln seasoned selected class of

sheesham wood sqm 4213.45

9.134.2 30 mm thick shutters

9.134.2.1 with ISI marked M.S. pressed butt hinges bright

finished of required size

9.134.2.1.1 Second class teak wood sqm 4006.05

9.134.2.1.2 Kiln seasoned and chemically
treated hollock wood sqm 2976.95

9.134.2.1.3 Kiln seasoned selected class of sheesham

wood sqm 3621.75

9.134.2.2 With ISI marked stainless steel butt hinges of required size
9.134.2.2.1 Second class teak wood sqm 4153.20
 9.134.2.2.2 Kiln seasoned and chemically
treated hollock wood sqm 3124.15
9.134.2.2.3 Kiln seasoned selected class of
sheesham wood sqm 3768.90
9.135 Providing and fixing fly proof stainless steel grade 304 wire gauge, to

windows and clerestory windows using wire gauge with average width
of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all
complete.
9.135.1 With 2nd class teak wood beading 62X19 mm sqm 1404.25
9.135.2 With 12 mm mild steel U beading sqm 1051.75
9.136 Providing and fixing fire resistant door frame of section 143 x 57 mm
having built in rebate made out of 16 SWG G.I. sheet (zinc coating not
less than 120 gm/sqm) duly filled with vermuculite based concrete mix,
suitable for mounting 60 minutes fire rated door shutters. The frame is
fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround
the frame and fixing with dash fastener of approved size and make,
including applying a coat of approved brand fire resistant primer etc.
complete as per direction of Engineer-in-charge (Dash fastener to be paid for
separately). metre 1462.75

9.137 Providing and fixing 50 mm thick glazed fire resistant door shutters of
60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified
as per laboratory approved by Engineer-in-charge, with suitable mounting
on door frame, consisting of vertical styles, lock rail, top rail 100 mm
wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc
coating not less than 120 gm/m2) duly filled FR insulation material and
fixing with necessary stainless steel ball bearing hinges of approved
make, including applying a coat of approved fire resistant primer etc. all
complete as per direction of Engineer-in-charge (panneling to be paid for
separately). sqm 6444.95

9.138 Providing and fixing glazing in fire resistant door shutters, fixed panels
& partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet
(zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed
with M4 x 38 mm SS screws at distance 75 mm from the edges and
150 mm c/c , including applying a coat of approved fire resistant primer/
powder coating of not less than 30 micron on G.I. beading, & special
ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC
2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge
with glass of required thickness having 60 minutes of fire resistance
both integrity & radiation control (EW60) and minimum 20 minutes of
insulation (EI20). The manufacturer have to give test report/certification
of fire glass and the glass should have the stamp showing the value of
E, EW & EI. The glass shall be tested in approved NABL accredited lab
or by any other accreditation body which operates in accordance with
ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and
 calibration scopes shall be eligible. The maximum glazing size shall not be
more than 1100x2200 mm (w x h) or 2.42 sqm. sqm 35982.00

9.139 Providing and fixing panic bar / latch (Double point) fitted with a single
body, Trim Latch & Lock on back side of the Panic Latch of reputed
brand and manufacture to be approved by the Engineer- in- charge, all
complete. each 7145.90

9.140 Providing and fixing plain lining with necessary screws/nuts & bolts/
nails, including a coat of approved primer on one face, and fixed on
wooden /steel frame work, complete as per direction of Engineer-in-
charge (Frame work shall be paid for separately).
9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type sqm 1084.60
9.141 Providing and fixing PVC Door Frame of size 50x47 mm with a wall
thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC
profile, with mitred cut joints and joint with 2 nos of PVC bracket of size
190 mm x 100 mm long arms of cross section size 35 x 15 mm & self
driven self taping screws, the vertical door profiles to be reinforced with
40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM
rubber gasket weather seal throughout the frame, including jointing 5
mm PVC frame strip with PVC solvent cement on the back of the profile.
The door frame to be fixed to the wall using 8 x100 mm long anchor
fasteners complete, all as per manufacturer's specification and direction of
Engineer -in- charge. metre 462.25

9.142 35 mm thick factory made Solid panel PVC Door shutter, made out of
single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having
styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of
which 75 mm shall be flat and 20 mm shall be tapered (on both side),
having one side thickness of 15 mm integrally extruded on the hinge
side of the profile for better screw holding power, including reinforcing
with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to
be mitered cut & joint with the help of PVC solvent cement, self driven
self tapping screws & M.S. rectangular pipes bracket of size 190 mm X
100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner.
Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x
35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both
ends, having 15 mm solid core in middle of rail section integrally
extruded, fixing the styles & rails with the help of solvent and self driven
self tapping screws of 125 mm x 11 mm, including providing 5 mm
Single piece solid PVC extruded sheet inserted in the door as panel, all
complete as per manufacturer's specification and direction of Engineer-
in-charge.
9.142.1 Non decorative finish (matt finish) sqm 3467.20
9.142.2 Decorative finish (wood grained finish) sqm 4018.40
9.143 Providing and Fixing factory made uPVC door frame, made of uPVC
exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm
(± 0.2 mm), corners of the door frame to be mitred cut and jointed with
plastic brackets and stainless steel screws, reinforcing hinge side
 vertical of the frames with PVC profile of Size 28 mm x 30 mm having
wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of
125 mm long stainless steel hinges to the frame, fixing the frame with
jamb with required number & size of anchor dash fastners, all complete as per
manufacturer's specification and direction of Engineer-in-charge. metre 545.60

9.144 Providing and fixing 37 mm thick factory made PVC door shutter, styles
and rails made of PVC hollow section of size 100 mm x 37 mm with
wall thickness 2 mm (± 0.2 mm), with inbuilt bead on one side, styles
and rails mitered cut and joint at the corners by means of 2 nos of
plastic brackets of size 75 mm x 220 mm at each corner and stainless
steel screws, reinforcing the hinge side of style by inserting PVC profile
of size 28 mm x 30 mm, with wall thickness 2 mm ( ± 0.2 mm). Lockrail
of size 100 mm x 37 mm, wall thickness 2 mm (+ 0.2 mm) will be fixed
to the vertical styles. Providing with PVC snapfit beads and panel of
size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and
fastening with nuts and washers complete, all as per manufacturer's
specification and direction of Engineer-in-charge. sqm 3654.45

9.145 Providing and Fixing factory made PVC door frame made of PVC extruded
sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2
mm). Both verticalssides of the frame reinforced with PVC profile of
cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and
75 mm x 200 mm long, including reinforcing both ends of the top frame
with PVC profile. PVC Door Frame and PVC reinforcement profile to be
mitred cut, jointed and fusion welded together, including providing and
fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the
frame with jamb with required nos & sizes of anchor dash fastener, all
complete as per manufacturer's specification and direction of engineer- in-
charge. metre 611.20

9.146 Providing and fixing 37 mm thick factory made PVC Door shutter, styles
and rails made of PVC hollow extruded printed and laminated section
having overall dimension 115 mm x 37 mm with wall thickness 2 mm (±
0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut
and joint at corners by inserting 2 nos PVC profile reinforcement of size
75 mm x 200 mm long with cross section size of 28 mm x 30 mm
having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements
to be fusion welded together. Only hinge side vertical style to be
reinforced with PVC profile reinforcement in full length. Printed and
laminated PVC lock rail of size 110 mm x 37 mm having wall thickness
2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after
inserting PVC profile reinforcement as in styles and rails, providing with
PVC snap fit beading, panels of 100 x 20 mm printed & laminated and
inserting 2 nos 6 mm dia bright steel rod horizontally with both side
threaded and tightened with check nuts and washers complete, all as per sqm 3954.15
manufacturer's specification and direction of engineer-in-charge.
9.147A Providing and fixing factory made uPVC white colour casement/casement cum
fixed glazed windows comprising of uPVC multi-chambered frame, sash and
mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2
mm thick galvanized mild steel section made from roll forming process of
required length (shape & size according to uPVC profile), uPVC extruded
glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS
304 grade) friction hinges, zinc alloy (white powder coated) casement
handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic
packers, plastic caps and necessary stainless steel screws etc. Profile of
frame & sash shall be mitred cut and fusion welded at all corners, mullion (if
required) shall be also fusion welded including drilling of holes for fixing
hardware's and drainage of water etc. After fixing frame the gap between
frame and adjacent finished wall shall be filled with weather proof silicon
sealant over backer rod of required size and of approved quality, all complete
as per approved drawing & direction of Engineer-in-Charge. (Single / double
glass panes and silicon sealant shall be paid separately). Variation in profile
dimension in higher side shall be accepted but no extra payment on this
account shall be made.

Note: For uPVC frame, sash and mullion extruded profiles minus 5%
tolerancein dimension i.e. in depth & width of profile shall be acceptable.
9.147A.1 Casement window single panel with S.S. friction hinges (300 x 19
x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both
having wall thickness of 1.9 ±
0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of
window upto 0.75 sqm.)
sqm 10443.75
9.147A.2 Casement window double panels with S.S. friction hinges (300 x
19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm &
mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single
glazing bead of appropriate dimension. (Area of window above 0.75 sqm
upto 1.50 sqm).

sqm 9635.40
9.147A.3 Casement window double panels with top fixed with S.S. friction
hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47
x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and
single glazing bead of appropriate dimension. ( Area of window upto 2.50
sqm).

sqm 7776.70
9.147A.4 Casement window single panel with S.S. friction hinges (400 x 19
x 1.9 mm) made of (big series)frame 67 x 60 mm & sash 67 x 80 mm both
having wall thickness of 2.3 ±
0.2 mm and single glazing bead / double glazing bead of
appropriate dimension. (Area of window above 0.75 sqm.) sqm 10347.05

9.147A.5 Casement window double panels with S.S. friction hinges

(350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm
& sash / mullion 67 x 80 mm both having wall thickness of
2.3 ± 0.2 mm and single glazing bead/ double glazing bead of
appropriate dimension. (Area of window above 1.50 sqm). sqm 10746.90

9.147A.6 Casement cum fixed panel window having both end single
 casement panel, middle fixed panels and at top completely
fixed ventilator with S.S friction hinges (350 x 19 x 1.9)
made of (big series) frame 67 x 60 mm , sash 67 x 80 mm
& mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2
mm and single glazing bead/double glazing bead of
appropriate dimension. (Area of window above 3.00 sqm upto
5.00 sqm). sqm 8135.75

9.147B Providing and fixing factory made uPVC white colour fixed glazed windows/
ventilators comprising of uPVC multi-chambered frame and mullion
(where ever required) extruded profiles duly reinforced with 1.60 ± 0.2
mm thick galvanized mild steel section made from roll forming process
of required length (shape & size according to uPVC profile), , uPVC
extruded glazing beads of appropriate dimension, EPDM gasket, G.I
fasteners 100 x 8 mm size for fixing frame to finished wall, plastic
packers, plastic caps and necessary stainless steel screws etc. Profile
of frame shall be mitred cut and fusion welded at all corners, mullion (if
required) shall be also fusion welded including drilling of holes for fixing
hardware's and drainage of water etc. After fixing frame the gap between
frame and adjacent finished wall shall be filled with weather proof silicon
sealant over backer rod of required size and of approved quality, all
complete as per approved drawing & direction of Engineer-in-Charge.
(Single / double glass panes and silicon sealant shall be paid
separately). Variation in profile dimension in higher side shall be accepted
but no extra payment on this account shall be made.
Note: For uPVC frame, sash and mullion extruded profiles minus 5%
tolerance in dimension i.e. in depth & width of profile shall be acceptable.
9.147B.1 Fixed window / ventilator made of (small series) frame 47 x 50 mm
& mullion 47 x 68 mm both having wall thickness of
1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto
0.75 sqm.)
sqm 7249.90
9.147C Providing and fixing factory made uPVC white colour casement/ Casement
cum fixed glazed door comprising of uPVC multi-chambered frame,
sash and mullion (where ever required) extruded profiles duly reinforced
with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll
forming process of required length (shape & size according to uPVC
profile), uPVC extruded glazing beads of appropriate dimension, EPDM
gasket, zinc alloy (white powder coated) 3D hinges and one handle on
each side of panels along with zinc plated mild steel multi point locking
 having transmission gear, cylinder with keeps and one side key, G.I
fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of fram
sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including
of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finis
wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all co
as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall b
separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account sha
made.

Note: For uPVC frame, sash and mullion extruded profiles minus 5%
tolerance in dimension i.e. in depth & width of profile shall be acceptable.

9.147C.1 Casement door with 3D hinges made of (big series) frame

67 x 64 mm & sash 67 x 110 mm both having wall thickness of
2.3 ± 0.2 mm and single glazing bead / double glazing bead of
appropriate dimension. (Area of door upto 2.00 sqm).
sqm 10284.70
9.147C.2 Casement door with top hung ventilator with 3D and S.S. friction
hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64
mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall
thickness of 2.3 ±. 0.2 mm and single glazing bead / double
glazing bead of appropriate dimension.(Area of door upto 2.50
sqm)
sqm 10451.95
9.147D Providing and fixing factory made uPVC white colour sliding glazed window
upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles
reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & s
according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM ga
wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capac
be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of fra
sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water e
After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backe
required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double
panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted b
extra payment on this account shall be made.

Note: For uPVC frame and sash extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be acceptable.
9.147D.1 Two track two panels sliding window made of (small series)
frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness
of 1.9 ± 0.2 mm and single glazing bead of appropriate
dimension. (Area of window upto 1.75 sqm)
sqm 7634.10
 9.147D.2 Three track three panels sliding window with fly proof SS wire
mesh (Two nos. glazed & one no. wire mesh panels) made of
(small series) frame 92 x 44 mm & sash 32 x 60 mm both having
wall thickness of 1.9 ± 0.2 mm and single glazing bead of
appropriate dimension (Area of window upto
1.75 sqm).
sqm 10030.30
9.147D.3 Two track two panels sliding window made of (big series) frame
67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3
± 0.2 mm and single glazing bead / double glazing bead of
appropriate dimension . (Area of window above 1.75 sqm upto
2.50 sqm).
sqm 7821.15
9.147D.4 Three track three panels sliding window with fly proof S.S wire
mesh (Two nos. glazed & one no. wire mesh panels) made of
(big series) frame 116 x 45 mm & sash 46 x 62 mm both having
wall thickness of 2.3 ± 0.2 mm and single glazing bead / double
glazing bead of appropriate dimension. (Area of window above
1.75 sqm). sqm 9642.60

9.147D.5 Three track three panels sliding window made of (big series)
frame 116 x 45 mm & sash 46 x 62 mm both having wall
thickness of 2.3 ± 0.2 mm and single glazing bead / double
glazing bead of appropriate dimension. (Area of window above
1.75 sqm) sqm 9183.30

9.147E Providing and fixing factory made uPVC white colour sliding glazed window
above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profile
reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & s
according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extru
Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme pane
with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock w
hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing
capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc.
of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainag
water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent o
backer rod of required size and of approved quality, all complete as per approved
drawing & direction of Engineer-in-Charge. (Single / double glass panes,

wire mesh and silicon sealent shall be paid separately). Variation in

profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Note: For uPVC frame and sash extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be acceptable.
 9.147E.1 Two track two panels sliding window made of (big series)
frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness
of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of
appropriate dimension. (Area of window above 2.50 sqm upto
4.00 sqm.)
sqm 7798.30
9.147E.2 Two track four panels sliding window made of (big series) frame
67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3
± 0.2 mm and single glazing bead / double glazing bead of
appropriate dimension. (Area of window above 4.00 sqm upto
8.00 sqm).
sqm 6783.70
9.147F Providing and fixing factory made uPVC white colour sliding glazed door
comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 m
galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appro
dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM
wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel mul
locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (S
grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing
to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all co
including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacen
finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all compl
per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be p
separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Note: For uPVC frame and sash extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be acceptable.
9.147F.1 Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having
thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door abo
sqm upto 5.00 sqm) sqm 6882.40

9.147F.2 Two track four panels sliding door made of (big series) frame
67 x 50 mm & sash 46 x 82 mm both having wall thickness of
2.3 ± 0.2 mm and single glazing bead / double glazing bead of
appropriate dimension. (Area of door above 8.00
sqm upto 10.00 sqm). sqm 6140.90
9.147F.3 Three track three panels sliding door made of (big series) frame
116 x 45 mm & sash 46 x 82 mm both having wall thickness of
2.3 ± 0.2 mm and single glazing bead/ double glazing bead of
appropriate dimension. (Area of door above
5.00 sqm)
sqm 6940.45
 9.147F.4 Three track three panels sliding door with fly proof S.S wire
mesh (Two nos. glazed & one no. wire mesh panels) made of
(big series) frame 116 x 45 mm & sash 46 x 82 mm both having
wall thickness of 2.3 ± 0.2 mm and single glazing bead / double
glazing bead of appropriate dimension. (Area of door above
2.00 sqm upto 5.00 sqm)

sqm 8766.85
9.148 Providing and fixing stainless steel (SS-304 grade) friction hinges to the
side/top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-ch

9.148.1 200 x 19 x 1.9 mm each 311.80

9.148.2 250 x 19 x 1.9 mm each 345.25
9.148.3 300 x 19 x 1.9 mm each 376.00
9.148.4 350 x 19 x 1.9 mm each 511.15
9.148.5 400 x 19 x 1.9 mm each 516.50
9.149 Providing and fixing casement handle made of zinc alloyed (white
powder coated) for uPVC casement window with necessary screws etc. complete.

each 188.55
9.150 Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC
sliding window with necessary screws etc. complete. each 167.15

9.151 Providing and fixing steel roller for uPVC sliding window with necessary screws
etc. complete. each 94.90

9.152 Providing and fixing steel roller for uPVC sliding door with necessary screws
etc. complete. each 155.10

9.153 Providing and fixing steel (white power coated) crescent lock for uPVC sliding
window/ door with necessary screws etc. complete. each 161.80

9.154 Providing and fixing frame work for partitions/ wall lining etc. made of
50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern
with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required
spacing near opening, with necessary welding at junctions and fixing the frame to wall/
ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making
provision for opening for doors, windows, electrical conduits, switch boards etc., including
providing with two coats of approved steel primer etc. complete, all as per direction of
Engineer-in-charge.

kg 133.35
9.155 Providing and fixing panelling or paneling and glazing in panelled or
panelled and glazed shutters for doors, windows and clerestory windows ( area of opening
for panel inserts excluding portion inside grooves or rebated to be measured). Panelling
for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative
lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587

sqm 1693.30
9.156 Providing and fixing Pre -laminated medium density fibre board exterior grade
(Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete
( Frames, backing or studding to be paid separately).
 9.156.1 Pre-laminated with decorative lamination on both side exterior Grade
- I MDF Board 12 mm thick confirming to IS:14587 sqm 921.35

9.156.2 Pre-laminated with decorative lamination on both side exterior Grade

- I MDF Board 18 mm thick confirming to IS:14587 sqm 1120.55

9.157 Providing and fixing Pre-laminated medium density fibre board IS:
14587:1998 marked, with one side decorative lamination other side balancing lamination
Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be
sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid
separately).

9.157.1 Pre-laminated with decorative lamination one side and other side
balancing lamination exterior Grade - I MDF Board 18 mm thick confirming to
IS:14587
sqm 1260.70
9.157.2 Pre-laminated with decorative lamination one side and other side
balancing lamination exterior Grade - I MDF Board 25 mm thick confirming to
IS:14587
sqm 1679.45
9.158 Providing and fixing in wall lining medium density fibre board IS:
14587:1998 marked, Pre-laminated one side decorative lamination and other side
balancing lamination, with necessary fixing arrangement and screws etc. complete.

9.158.1 12 mm thick. sqm 1065.15

9.158.2 18 mm thick. sqm 1275.60
9.158.3 25 mm thick. sqm 1709.75
9.159 Providing and fixing 25mm thick pre-laminated medium density fibre board
exterior grade ( Grade-I) IS:14587:1998 marked with one side decorative and other side
balancing lamination for cupboard shutters edges to be sealed with PVC edge bending
tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing
M.S. piano hinges conforming to IS:3818 marked with necessary screw etc
all complete.

sqm 1890.90
9.160 Providing and fixing skirting with Pre-laminated medium density fibre
board exterior grade (Grade-I) conforming to IS: 14587:1998 marked,
with (one side decorative and other side balancing lamination and edges
to be sealed with PVC edge bending tape 2.00 mm thick of approved
brand with necessary fixing arrangements and screws, including drilling
necessary holes for rawl plugs etc. all complete.
9.160.1 18 mm thick. sqm 1834.45
9.160.2 25 mm thick. sqm 2268.60
9.161 Providing and fixing fire resistant door frame of section 50 x 60 mm on
horizontal side & 35 x 60 mm on vertical sides having built in rebate
made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/
m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters.
The frame shall be filled with Mineral wool Insulation having density min
 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos
( 5 each on vertical style & 4 on horizontal style of size M10 x 80 )
suitable for fixing in the opening along with Factory made Template for
SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated
glazed shutter . The frame shall be finished with a approved fire resistant
primer or Powder coating of not less than 30 micron in desired shade
as per the directions of Engineer - in- charge . (Cost of SS ball bearing
hinges is excluded). metre 1791.05

9.162 Providing and fixing 60 mm thick glazed fire resistant door shutters of
120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999,
tested and certified as per laboratory approved by Engineer-in-charge,
with suitable mounting on door frame, consisting of vertical styles, top
rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60
mm made out of 1.6mm thick G.I. sheet (zinc coating not less than
120gm/m²) duly filled mineral wool insulation having density min 96 kg/
m³ and fixing with necessary stainless steel ball bearing hinges of size
100x89x3mm of approved make, including applying a coat of approved
fire resistant primer or powder coating not less than 30 micron etc all
complete as per direction of Engineer-in-charge (panelling to be paid for
seperately). sqm 9736.05

9.163 Providing and fixing non load bearing fixed frame for fire resistant glazed
Partition for 120 minutes Fire Rating, made out to a profile of dimension
60mm x 70 mm of 1.6 mm thick galvanised steel sheet as per test
evidence suitable for fixing fire rated glass for 120 minutes of both integrity
& radiation control (EW120) & minimum 20 minutes of insulation
(EI20).The profile has to be fixed to the supporting construction by means
of anchor fasteners of size M10 x 80, every 150 mm from the edges and
every 500 mm (approx) c/c. Linear measurement of frame shall be
measured for payment. The frame shall be filled with mineral wool
insulation of density min 96kg/ m³. and finished with a approved fire
resistant primer or Powder coating of not less than 30 micron in desired
shade as per NBC 2016, IS 16231 (Part 3):2016 and directions of
Engineer - in- charge. metre 1791.05
9.164 Providing and fixing glazing in fire resistant door shutters, fixed panels
& partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not
less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at
distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved
fire resistant primer/ powder coating of not less than 30 micron on G.I. beading, & special
ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231
(Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness
having 120 minutes of fire resistance both integrity & radiation control (EW120) and
minimum 20 minutes of insulation (EI20). The manufacturer have to give test
report/certification of fire glass and the glass should have the stamp showing the value of
E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other
accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs
as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum
glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm.

sqm 39995.80
9.165 Providing and fixing bright /matt finished Stainless Steel handles of approved
quality & make with necessary screws etc all complete.
9.165.1 125 mm each 100.45
9.165.2 100mm each 75.70
9.165.3 75 mm each 48.95
9.166 Providing and fixing 18mm thick both sides Pre-laminated cement bonded
wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full
threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen
cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge
(Note: Fittings to be paid separately).

9.166.1 18 mm thick sqm 1215.75

9.167 Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood
particle board as per IS : 15786:2008 of approved brand and shade with suitable full
threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet
under kitchen counter etc. all complete as per direction of Engineer-in-charge.

sqm 902.55
9.168 Providing and fixing cupboard shutter with 19mm thick one side
decorative and other side balancing lamination factory pressed BWP grade marine ply as
per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue
by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc.
complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto
closing hinges shall be paid separately)

sqm 2563.75
9.169 Providing and fixing 19mm thick both side balancing lamination factory
pressed BWP grade marine ply as per IS 710 of approved brand
boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary
nails,screws etc. complete as per direction of Engineer-in- charge.

sqm 2339.60
 9.170 Providing and fixing stainless steel fancy handle of approved make fixed
with SS screws etc. complete as per direction of Engineer-in-charge.
9.170.1 200 mm each 153.15
9.171 Providing and fixing stainless steel soft closing spring hinges at 0 degree
hinges (hydraulic type) of approved make/brand to cupboard shutters
with full threaded steel screws including making necessary recess in board
and finished etc. complete as per direction of Engineer-in-charge. each 226.75

9.172 Providing and fixing stainless steel soft closing heavy type telescopic
drawer channels of approved make 500 mm long with screws etc. complete as
per directions of Engineer- in-charge. one set 749.70

9.173 Providing and fixing ready made 304 grade stainless steel Modular kitchen
basket and accessories such as right angle basket (Plain Cup & Saucer,
plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner
set basket, kitchen grain basket, Multipurpose basket as per site
requirement including finishing (wherever required) and fittings. The same
shall be fixed with necessary stainless steel nuts & bolts, Stainless
Steel screws & telescopic channel etc. as per direction of Engineer-in-
charge. (For payment purpose only weight of Stainless steel basket
shall be considered excluding weight of all fixing accessories such as
nuts, bolts, fasteners telescopic basket channels etc. Payment of providing
and fixing telescopic channel shall be paid separately) kg 423.70

9.174 Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding
tape of approved quality for cupboard/wardrobe shutters including
necessary synthetic resin hot pressed to edges on binding machine
etc. complete as per directions of Engineer- in-charge. metre 38.45
SUB HEAD : 10.0
STEEL WORK

219
 BASIC RATES (10.0 STEEL WORK)
Code Description Unit Rate
No.

0100 Bandhani day 714.00

0101 Bhisti day 714.00
0102 Blacksmith 1st class day 784.00
0103 Blacksmith 2nd class day 714.00
0112 Carpenter 2nd class day 714.00
0114 Beldar day 645.00
0116 Fitter (grade 1) day 784.00
0119 Glazier day 714.00
0123 Mason (brick layer) 1st class day 784.00
0124 Mason (brick layer) 2nd class day 714.00
0139 Skilled Beldar (for floor rubbing etc.) day 714.00
0595 Bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm
10 Nos 80.00

0969 Pulley 25 mm dia each 48.00

0973 Rolling shutter made of 80x1.25 mm machine rolled laths sqm 1400.00
0974 Top cover for rolling shutters 1.25 mm thick metre 800.00
0975 27.5 cm long wire spring grade No. 2 for rolling shutters each 300.00
0976 Ball bearing for rolling shutters each 260.00
0977 Extra for mechanical devices chain and cranked operation for operating rolling
shutters: exceeding 10.00 sqm and up to
16.80 sqm area of door
sqm 800.00
0978 Extra for mechanical devices chain and cranked operation for operating rolling
shutters: exceeding 16.80 sqm area of door sqm 800.00

1002 Mild steel round bar 12 mm dia and below quintal 4850.00
1003 Mild steel round bar above 12 mm dia quintal 4750.00
1007 Structural steel such as tees, angles channels and R.S. joists quintal 4950.00
1008 Flats up to 10 mm in thickness quintal 4850.00
1009 Flats exceeding 10 mm in thickness quintal 4950.00
1010 Mild steel plates quintal 5400.00
1011 Steel glazed door, window/ ventilator, all members viz. F7D, F4B, K11 and
K12B etc. kg 54.00

1013 Mild steel sheets of 1.00 mm thickness for tanks quintal 4850.00
1019 Mild steel hooks each 32.00
1020 Mild steel rivets quintal 5100.00
1034 Bolts and nuts up to 300 mm in length quintal 5200.00
1035 Bolts and nuts above 300 mm in length quintal 5300.00
1036 Iron pintels including welded pin each 37.00
1143 Steel beading 10x10x1.6mm (box type) metre 27.00

1214 Welding by gas plant cm 2.00

1215 Welding by electric plant cm 2.00
1221 M.S. 20 mm dia holding down bolts quintal 6100.00
1222 Mild steel sheets with bolts and nuts to rest on pintels each 120.00
1549 G.I. pipes 40 mm dia metre 290.00
2205 Carriage of Steel tonne 145.72
2271 Carriage of G.I. pipes below 100 mm dia tonne 145.72
2406 Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm)
sqm 309.00

2407 Float glass panes of nominal thickness 5 mm (weight not less than
12.50 kg/sqm) sqm 515.00

2506 Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm
dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm
dia polyamide PA 6 grade sleave. Size 10mm x 60 mm

10 Nos 270.00
2507 Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm
dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm
dia polyamide PA 6 grade sleave. Size 10mm x 80 mm

10 Nos 312.00
2508 Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm
dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm
dia polyamide PA 6 grade sleave. Size 10 mm x 120 mm

10 Nos 380.00
2509 Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm
dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm
dia polyamide PA 6 grade sleave. Size 10mm x 140 mm

10 Nos 468.00
2510 Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm
dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm
dia polyamide PA 6 grade sleave. Size 10mm x 160 mm

10 Nos 598.00
4001 Stainless steel (Grade-304)hollow section round/square tubes kg 230.00
4002 Stainless steel bolts/square bar and plates kg 120.00
4006 Pressed steel door frames (mild steel sheet 1.60 mm) Profile "B" metre 200.00
4007 Pressed steel door frames (mild steel sheet 1.60 mm) Profile "C" metre 220.00
4008 Pressed steel door frames (mild steel sheet 1.60 mm) Profile "E" metre 250.00
4009 Mild steel tubes hot finished welded type kg 60.00
4010 Mild steel tubes hot finished seamless type kg 70.00
4011 Mild steel tubes electric resistant or induction butt welded kg 50.00
4012 Circular C.I. Box for ceiling fan internal dia 140 mm, 73 mm height, toplid of
1.5mm thick MS sheet each 55.00

4013 Pulley 40 mm dia each 35.00

7029 Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of
wire 0.63 mm sqm 250.00

7044 Rolling shutters of 80x0.90 mm laths sqm 1300.00

7045 Rolling shutters of 80x1.2 mm laths sqm 1375.00
7046 Top cover of Rolling shutters 0.90 mm thick metre 450.00
7047 Top cover of Rolling shutters 1.20 mm thick metre 560.00
7068 Extra for providing grilled rolling shutters with 8 mm dia M.S. rod sqm 500.00
8737 Stainless steel wire guage (Grade-304) aperture 1.4 mm and 0.50mm dia wire
sqm 413.00

9977 Carriage L.S. 2.12

9988 Carriage and sundries L.S. 2.12
9999 Sundries L.S. 2.12

10.0 STEEL WORK

Code Description Unit Rate
No.

10.1 Structural steel work in single section, fixed with or without connecting plate,
including cutting, hoisting, fixing in position and applying a priming
coat of approved steel primer all complete. kg 93.05
10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and
framed work, including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer all complete. kg 78.20
10.3 Providing and fixing in position collapsible steel shutters with vertical channels
20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and
bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with
bolts, nuts, locking arrangement, stoppers,
handles, including applying a priming coat of approved steel primer. sqm 9397.35
10.4 Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and
diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the
junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide
at the top and bottom respectively, including
applying a priming coat of approved steel primer sqm 5374.35
10.5 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm
angle iron and 3 mm M.S. gusset plates at the junctions and corners, all
necessary fittings complete, including applying a priming coat of approved
steel primer.
10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces sqm 4781.15
 10.5.2 Using flats 30x6mm for diagonal braces and central cross piece sqm 4615.15
10.6 Supplying and fixing rolling shutters of approved make, made of required size
M.S. laths, interlocked together through their entire length and jointed together
at the end by end locks, mounted on specially designed pipe shaft with
brackets, side guides and arrangements for inside and outside locking with
push and pull operation complete, including the cost of providing and fixing
necessary 27.5 cm long wire springs manufactured from high tensile
steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top
cover of required thickness for rolling shutters.

10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover sqm 3008.80
10.6.2 80x1.20 mm M.S. laths with 1.20 mm thick top cover sqm 2868.30
10.6.3 80x0.90 mm M.S. laths with 0.90 mm thick top cover sqm 2718.90
10.7 Providing and fixing ball bearing for rolling shutters. each 424.20
10.8 Extra for providing mechanical device chain and crank operation for operating
rolling shutters.
10.8.1 Exceeding 10.00 sqm and upto 16.80 sqm in the area sqm 1108.70
10.8.2 Exceeding 16.80 sqm in area sqm 1108.70
10.9 Extra for providing grilled rolling shutters manufactured out of 8 mm dia
M.S. bar instead of laths as per design approved by Engineer-in- charge,
(area of grill to be measured). sqm 668.95

10.10 Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazin
and special metal- sash putty of approved make, or metal beading with screws, (only steel windows, glass panes cut to size an
glazing clips or metal beading with screws, shall be supplied by department free of cost.
10.10.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 c
sand : 6 graded stone aggregate 20 mm nominal size) kg 69.35

10.10.2 Fixing with carbon steel galvanised dash fastener of required

dia and size (to be paid for separately) kg 34.40
10.11 Providing and fixing factory made ISI marked steel glazed doors, windows and
ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B
and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt
welded and sash bars tenoned and riveted, including providing and fixing of hinges,
pivots, including priming coat of approved steel primer, but excluding the cost of other
fittings, complete all as per approved design, (sectional weight of only steel members shall
be measured for payment).

10.11.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement

concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse
 sand : 6 graded stone aggregate 20 mm nominal size) kg 175.65
10.11.2 Fixing with carbon steel galvanised dash fastener of required
dia and size (to be paid for separately) kg 109.15
10.12 Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box
type), approved shape and section with screws instead of glazing clips and metal sash
putty, in steel doors, windows, ventilators and
composite units. metre 45.95
10.13 Providing and fixing T-iron frames for doors, windows and ventilators of mild
steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges
and screws and applying a priming coat of approved steel primer.

10.13.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement

concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size). kg 114.65
10.13.2 Fixing with carbon steel galvanised dash fastener of required
dia and size (to be paid for separately) kg 109.35
10.14 Providing and fixing pressed steel door frames conforming to IS: 4351,
manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges,
jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25
mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by
mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards,
lock strike-plate and shock absorbers as specified and applying a coat of approved steel
primer after pre-treatment of the surface as directed by Engineer-in-charge:

10.14.1 Profile B
10.14.1.1 Fixing with adjustable lugs with split end tail to
each jamb metre 444.50
10.14.1.2 Fixing with carbon steel galvanised dash fastener
of required dia and size (to be paid for separately) metre 433.15
10.14.2 Profile C
10.14.2.1 Fixing with adjustable lugs with split end tail to
each jamb metre 471.25
10.14.2.2 Fixing with carbon steel galvanised dash fastener
of required dia and size (to be paid for separately) metre 459.90
10.14.3 Profile E
10.14.3.1 Fixing with adjustable lugs with split end tail to
each jamb metre 511.40
10.14.3.2 Fixing with carbon steel galvanised dash fastener
of required dia and size (to be paid for separately) metre 500.05
10.15 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and
cupboard with rectangular/ L-Type sections, made of 1.60 mm thick
M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size,
including fixing of necessary butt hinges and screws and applying a priming coat of
approved steel primer.

10.15.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement

concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size) kg 146.55
 10.15.2 Fixing with carbon steel galvanised dash fastener of required dia and
size (to be paid for separately) kg 133.60

10.16 Steel work in built up tubular (round, square or rectangular hollow tubes etc.)
trusses etc., including cutting, hoisting, fixing in position and applying a priming coat
of approved steel primer, including welding and bolted with special shaped washers etc.
complete.
10.16.1 Hot finished welded type tubes kg 154.90
10.16.2 Hot finished seamless type tubes kg 168.95
10.16.3 Electric resistance or induction butt welded tubes kg 140.85
10.17 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to
shape with hooked ends in R.C.C. slabs or beams during laying, including painting the
exposed portion of loop, all as per standard design
complete. each 185.95
10.18 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling
fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with
its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S.
sheet box by means of
3.3 mm dia round headed screws, one lock at the corners. Clamp shall
be made of 12 mm dia M.S. bar bent to shape as per standard drawing. each 185.20
10.19 Providing and fixing mild steel round holding down bolts with nuts and
washer plates complete. kg 88.50

10.20 Providing and fixing bolts including nuts and washers complete. kg 140.15
10.21 Providing and fixing M.S. rivets of sizes in position. kg 237.85
10.22 Welding by gas or electric plant including transportation of plant at site etc.
complete. cm 3.40

10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting,
fixing in position and applying a priming coat of approved steel primer using
structural steel etc. as required.

10.25.1 In stringers, treads, landings etc. of stair cases, including use of

chequered plate wherever required, all complete kg 102.25

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets,

gates and similar works kg 142.30
10.26 Providing and fixing hand rail of approved size by welding etc. to steel ladder
railing, balcony railing, staircase railing and similar works, including applying priming
coat of approved steel primer.

10.26.1 M.S. tube kg 157.15

10.26.2 E.R.W. tubes kg 150.40
10.26.3 G.I. pipes kg 180.20
10.27 Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash
fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter
sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of
hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.

10.27.1 10 x 60 mm each 111.70

 10.27.2 10 x 80 mm each 117.30
10.27.3 10 x 120 mm each 144.60
10.27.4 10 x 140 mm each 156.35
10.27.5 10 x 160 mm each 191.95
10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,
channels, plates etc., including welding, grinding, buffing, polishing and making curvature
(wherever required) and fitting the same with necessary stainless steel nuts and bolts
complete, i/c fixing the railing with necessary accessories & stainless steel dash
fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of
waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment
purpose only weight of stainless steel members shall be considered excluding fixing
accessories such as nuts, bolts,
fasteners etc.).

kg 612.25
10.29 Providing & fixing fly proof wire gauze to windows, clerestory windows &
doors with M.S. Flat 15x3 mm and nuts & bolts complete.
10.29.1 Galvanised M.S. Wire gauze with 0.63 mm dia wire and
1.4 mm aperture on both sides sqm 732.20
10.29.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire
and 1.4 mm aperture on both sides sqm 971.55
10.30 Providing & fixing glass panes with putty and glazing clips in steel doors,
windows, clerestory windows, all complete with :
10.30.1 4.0 mm thick glass panes sqm 940.30
10.30.2 5.5 mm thick glass panes sqm 1243.50
10.31 Providing and fixing angle iron frames for doors, windows and ventilators of
mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron
35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash
fastener, including fixing of necessary butt hinges and screws and applying a priming coat
of approved steel
primer, all complete as per the direction of Engineer-In-charge. kg 103.70
SUB HEAD : 11.0
FLOORING

229
 BASIC RATES (SH: 11.0 FLOORING)
Code Description Unit Rate
No.

0002 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper day 800.00

0013 Machine for rubbing of floors day 300.00

0100 Bandhani day 714.00
0101 Bhisti day 714.00
0103 Blacksmith 2nd class day 714.00
0111 Carpenter 1st class day 784.00
0114 Beldar day 645.00
0115 Coolie day 645.00
0123 Mason (brick layer) 1st class day 784.00
0124 Mason (brick layer) 2nd class day 714.00
0126 Mason (for ornamental stone work) 1st class day 784.00
0127 Driver for (Road roller, concrete mixer, Trucks etc.) day 784.00
0130 Mistry day 784.00
0139 Skilled Beldar (for floor rubbing etc.) day 714.00
0295 Stone Aggregate (Single size) : 20 mm nominal size cum 1400.00
0296 Stone Aggregate (Single size) : 12.5 mm nominal size cum 1350.00
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 1350.00
0298 Stone Aggregate (Single size) : 06 mm nominal size cum 1400.00
0313 Blown type petroleum bitumen of penetration 85/25 of approved quality
tonne 34790.00

0367 Portland Cement (OPC-43 Grade) tonne 5000.00

0368 White Cement tonne 11200.00
0682 Oxidised mild steel screws 50 mm 100 Nos 76.00
0784 Marble dust/ powder cum 1130.00
0785 Marble chips up to 4 mm and down size White & black quintal 189.00
0788 Marble chips large size above 4 mm White & black quintal 250.00
0874 Black colour dark shade pigment kg 70.00
0875 Red, chocolate, orange, buff or yellow (red oxide of iron) light shade pigment
kg 60.00

0876 Green or blue medium shade pigment kg 56.00

0982 Coarse sand (zone III) cum 1500.00
0983 Fine sand (zone IV) cum 900.00
1007 Structural steel such as tees, angles channels and R.S. joists quintal 4950.00
1008 Flats up to 10 mm in thickness quintal 4850.00
1149 Glass strip 4 mm thick 40 mm deep metre 20.00
1164 Red sand stone slab 40 mm thick (un-dressed) sqm 230.00

1165 White sand stone slab 40 mm thick (un-dressed) sqm 250.00

1168 Kota stone slab 20 mm to 25 mm thick (semi-polished) sqm 320.00
1187 First class teak wood in scantling 10 cudm 880.00
1190 Second class teak wood in planks 10 cudm 791.00
1194 Second class deodar wood in planks 10 cudm 500.00
1201 Precast terrazzo tiles 22 mm thick (light shade) sqm 285.00
1202 Precast terrazzo tiles 22 mm thick (medium shade) sqm 265.00
1203 Precast terrazzo tiles 22 mm thick (dark shade) sqm 245.00
1215 Welding by electric plant cm 2.00
1227 Chequered terrazzo tiles 22 mm thick (light shade) sqm 275.00
1228 Chequered terrazzo tiles 22 mm thick (medium shade) sqm 300.00
1229 Chequered terrazzo tiles 22 mm thick (dark shade) sqm 260.00
1231 Extra for selected planks of second class teakwood 10 cudm 150.00
1240 18 mm thick Italian Marble stone slab, Perlato (slab area up to 0.5 sqm).
sqm 3209.00

1241 Commercial LPG in cylinder kg 84.00

1242 Glass mossaic tiles (20 mm x 20 mm x 4 mm) sqm 2049.00
1243 Tile fixing chemical adhesive kg 8.70
1244 Cement Polymer Grout Compound kg 13.00
1245 Acid for cleaning tiles litre 18.00
2201 Carriage of Bricks 1000 Nos 437.15
2202 Carriage of Stone aggregate below 40 mm nominal size cum 163.93
2203 Carriage of Coarse sand cum 163.93
2204 Carriage of Timber cum 187.35
2205 Carriage of Steel tonne 145.72
2209 Carriage of Cement tonne 145.72
2211 Carriage of Tar / Bitumen tonne 163.93
2216 Carriage of Stone blocks white & red sand stone & kota stone slab tonne 145.72
2261 Carriage of Fine sand (1 part of badarpur sand: 2 parts jamuna sand) cum 163.93
2268 Carriage of Marble dust and/or marble chips cum 163.93
2500 Extra for selected planks of second class deodar wood 10 cudm 113.00
2602 Common burnt clay F.P.S. (non modular) bricks class designation 7.5
1000 Nos 4590.00

2708 Truf Paver (500 x 500 x 40 mm) sqm 510.00

2709 Ceremic Tiles Pieces for Crazy Flooring quintal 145.00
2710 White marble makrana second quality plain veined stone pieces
for crazy flooring quintal 160.00

2711 FS800H Grade Flooring Panel (Size 600 mm x600 mm x32 mm) each 740.00
2712 Zinc Electroplated Pedestals - 300 mm each 145.00
2713 Zinc Electroplated Pedestals - 450 mm each 210.00
2714 Zinc Electroplated Tube Stinger each 70.00
2715 Machine Screw for Fixing each 3.00
2750 8 mm thick granite stone tiles (mirror polished of all shades) sqm 690.00
2751 8 mm thick marble tiles (polished) Raj Nagar sqm 400.00
2752 Double charge vitrified tile polished finish of size 60 x 60 cm sqm 460.00
2753 Double charge vitrified tile polished finish of size 80 x 80 cm sqm 525.00
2754 Double charge vitrified tile polished finish of size 60 x 120 cm sqm 550.00
2755 Double charge vitrified tile polished finish of size 80 x 160 cm sqm 750.00
2756 Double charge vitrified tile polished finish of size 100 x 100 cm sqm 700.00
2757 Glazed vitrified tiles polished finish of size 60 x 60 cm sqm 500.00
2758 Glazed vitrified tiles polished finish of size 60 x 120 cm sqm 700.00
2759 Glazed vitrified tiles polished finish of size 80 x 80 cm sqm 650.00
2760 Glazed vitrified tiles polished finish of size 80 x 120 cm sqm 880.00
2761 Glazed vitrified tiles polished finish of size 120 x 120 cm sqm 1200.00
2762 Glazed Vitrified tiles Matt/Antiskid finish of size 60 x 60 cm sqm 480.00
2763 Glazed Vitrified tiles Matt/Antiskid finish of size 60 x 120 cm sqm 700.00
2764 Glazed Vitrified tiles Matt/Antiskid finish of size 80 x 80 cm sqm 650.00
2765 Glazed Vitrified tiles Matt/Antiskid finish of size 80 x 120 cm sqm 880.00
2766 Glazed Vitrified tiles Matt/Antiskid finish of size 120 x 120 cm sqm 1400.00
6001 White marble slab Makrana second quality plain veined 18 mm thick
sqm 1450.00

6007 Pink marble slab plain 18 mm thick sqm 685.00

6010 Udaypur green marble slab plain 18 mm thick sqm 620.00
6019 Black Zebra marble slab plain 18 mm thick sqm 1000.00
7024 Acid Proof cement tonne 7800.00
7048 Rawl plug 50 mm (designation 10 nos) each 22.00
7070 Chequered precast cement concrete tiles 22 mm thick using marble chips of
size 6mm - Light shade using white cement sqm 370.00

7071 White marble Raj Nagar plain 18 mm thick upto 0.50 sqm area sqm 550.00
7077 Acid and alkali resistant tiles 300x300 mm size, 10 mm thick 10 Nos 500.00
7236 Precast chequered cement tiles 22 mm thick Dark shade using ordinary
cement sqm 225.00

7237 Precast chequered cement tiles 22 mm thick medium shade

using 50% white cement 50% ordinary cement sqm 335.00

7254 Hardening compound litre 36.00

7388 Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt each 10.00
7800 Ceramic Glazed Tiles 1st quality minimum thickness 5mm in all colours
shades and designs except burgundy, bottle green, black

sqm 190.00
7801 Ceramic Glazed Tiles 1st quality 300 x 300 mm in all shades and designs of
White, Ivory, grey, Fume Red brown etc. sqm 175.00

7802 Ceramic Glazed Tiles 1st quality 300 x 300 in all shades designs except
White, Ivory, Grey, Fume Red Brown etc. sqm 300.00

7803 Rectified Ceramic Glazed Tiles 1st quality 300 x 300 mm or more in all shades
designs White, Ivory, Grey, Fume Red Brown etc.

sqm 340.00
7804 Rectified Ceramic Glazed Tiles 1st quality 300 x 300 mm or more in all shades
designs except White, Ivory, Grey, Fume Red Brown etc.

sqm 400.00
7850 Agaria White marble slab plain 18 mm thick sqm 950.00
8620 Vitrified floor tile 50x50 cm conforming to IS 15622:2006 group (B1a)
sqm 500.00

8621 Vitrified floor tile 60x60 cm conforming to IS 15622:2006 group (B1a)

sqm 560.00

8622 Vitrified floor tile 80x80 cm conforming to IS 15622:2006 group (B1a)

sqm 900.00

8623 Vitrified floor tile 100x100 cm conforming to IS 15622:2006 group (B1a)

sqm 1390.00

8624 "Border tiles 200x75mm size each 16.00

8682 Epoxy Grout kg 380.00
8731 High polymer modified quickset tile adhesive kg 9.00
9977 Carriage L.S. 2.12
9988 Carriage and sundries L.S. 2.12
9999 Sundries L.S. 2.12

11.0 FLOORING
Code Description Unit Rate
No.

11.1 Brick on edge flooring with bricks of class designation 7.5 on a bed of
12 mm cement mortar, including filling the joints with same mortar, with
common burnt clay non modular bricks:
11.1.1 1:4 (1 cement : 4 coarse sand) sqm 937.00
11.1.2 1:6 (1cement : 6 coarse sand) sqm 898.20
11.2 Dry brick on edge flooring in required pattern with bricks of class
designation 7.5 on a bed of 12 mm mud mortar, including filling joints with
Jamuna sand, with common burnt clay non modular bricks. sqm 733.30

11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate) finished with a floating coat of neat cement, including
cement slurry, but excluding the cost of nosing of steps etc. complete.
11.3.1 40 mm thick with 20 mm nominal size stone aggregate sqm 545.00
11.4 52 mm thick cement concrete flooring with concrete hardener topping,
under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12
mm thick cement hardener consisting of mix 1:2 (1 cement hardener
mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening
compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's
specifications. This includes cost of cement slurry, but excluding the cost of
nosing of steps etc. complete.
sqm 855.90
11.5 62 mm thick cement concrete flooring with concrete hardener topping,
under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm nominal size) and top layer
12mm thick cement hardener consisting of mix 1:2 (1 cement hardener
mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening
compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s
specifications. This includes cost of cement slurry, but excluding the cost of
nosing of steps etc. complete.
sqm 928.65
11.6 Cement plaster skirting up to 30 cm height, with cement mortar 1:3
(1 cement : 3 coarse sand), finished with a floating coat of neat cement.
11.6.1 18 mm thick sqm 570.75
11.7 Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size), including finishing complete.
cum 7958.65

11.8 Extra for making chequers of approved pattern on cement concrete floors,
steps, landing, pavements etc. sqm 69.30

TERRAZO FLOORING
11.9 40 mm thick marble chips flooring rubbed and polished to granolithic finish,
under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top
layer 6mm thick with white, black, chocolate, grey, yellow or green
 marble chips of sizes from 1 mm to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble
powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume, including cement
etc. complete :
11.9.1 Dark shade pigment with ordinary cement sqm 917.50
11.9.2 Light shade pigment with white cement sqm 947.30
11.9.3 Medium shade pigment with 50% white cement and 50% ordinary
cement sqm 929.00

11.9.4 White cement without any pigment sqm 925.75

11.9.5 Light shade pigment with ordinary cement sqm 913.70
11.9.6 Ordinary cement without any pigment sqm 889.85
11.10 40 mm thick marble chips flooring, rubbed and polished to granolithic
finish, under layer 31 mm thick cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top
layer 9 mm thick with white, black, chocolate, grey, yellow or green
marble chips of sizes from 4 mm to 7 mm nominal size, laid in cement
marble powder mix 3:1 (3 cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume,
including cement slurry etc. complete.
11.10.1 Dark shade pigment with Ordinary cement sqm 946.90
11.10.2 Light shade pigment with white cement sqm 989.45
11.10.3 Medium shade pigment with 50% white cement and 50% ordinary
cement sqm 963.30

11.10.4 White cement without any pigment sqm 955.35

11.10.5 Light shade pigment with ordinary cement sqm 941.50
11.10.6 Ordinary cement without any pigment sqm 907.45
11.11 40 mm thick marble chips flooring, rubbed and polished to granolithic
finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top
layer 12 mm thick with white, black, chocolate, grey yellow or green
marble chips of sizes from 7 mm to 10 mm nominal size, laid in cement
marble powder mix 3:1 (3 cement : 1 marble powder) by weight in
proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by
volume, including cement slurry etc. complete :
11.11.1 Dark shade pigment with ordinary cement sqm 979.90
11.11.2 Light shade pigment with white cement sqm 1039.50
 11.11.3 Medium shade pigment with 50% white cement and 50% ordinary
cement sqm 1002.90

11.11.4 White cement without any pigment sqm 992.25

11.11.5 Light shade pigment with ordinary cement sqm 972.30
11.11.6 Ordinary cement without any pigment sqm 925.05

11.12 Marble chips skirting up to 30 cm height, rubbed and polished to granolithic finish, top layer 6 mm thick with w
black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size, laid in cement marble powder
3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume :
11.12.1 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse sand) :

11.12.1.1 Dark shade pigment with ordinary cement sqm 1563.70

11.12.1.2 Light shade pigment with white cement sqm 1593.50
11.12.1.3 Medium shade pigment with 50% white cement and 50%
ordinary cement sqm 1575.20

11.12.1.4 White cement without any pigment sqm 1569.65

11.12.1.5 Light shade pigment with ordinary cement sqm 1559.90
11.12.1.6 Ordinary cement without any pigment sqm 1536.05
11.13 Providing and fixing glass strips in joints of terrazo/ cement concrete
floors.
11.13.1 40 mm wide and 4 mm thick metre 79.50
11.14 Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in
width, including cost of forming, nosing etc. sqm 80.45

11.15 Crazy marble stone flooring, including filling the gaps with light shade pigment
with white cement marble powder mixture (3 parts of white
cement : 1 part of marble powder) by weight in proportion of 4:7 (4
cement marble powder mix : 7 white, black or white and black marble
chips of sizes from 1 mm to 4 mm nominal size by volume), with under
layer 25 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing
and cement slurry etc. complete :
11.15.1 18 mm thick crazy marble stone white, black or as specified sqm 1461.65
TILE FLOORING
11.16 Precast terrazo tiles 22 mm thick with graded marble chips of size upto
12 mm, laid in floors, and landings, jointed with neat cement slurry
 mixed with pigment to match the shade of the tiles, including rubbing
and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1
cement:4 coarse sand) :
11.16.1 Light shade pigment using white cement sqm 1309.90
11.16.2 Medium shade pigment using 50% white cement and 50% ordinary
cement sqm 1259.95

11.16.3 Dark shade pigment using ordinary cement sqm 1218.65

11.16.4 Ordinary cement without any pigment sqm 1163.20
11.17 Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in
width. sqm 102.10

11.18 Precast terrazo tiles 22 mm thick with graded marble chips of sizes
upto 12 mm, in skirting and risers of steps not exceeding 30 cm in
height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand),
jointed with neat cement slurry mixed with pigment to match the shade
of the tiles, including rubbing and polishing complete with tiles of :
11.18.1 Light shade pigment using white cement sqm 2027.75
11.18.2 Medium shades pigment using 50% white cement and 50% ordinary
cement sqm 1968.45

11.18.3 Dark shade pigment using ordinary cement sqm 1920.30

11.18.4 Ordinary cement without any pigment sqm 1850.45
11.19 Chequered terrazo tiles 22 mm thick with graded marble chips of size
up to 6 mm in floors, jointed with neat cement slurry mixed with pigment
to match the shade of the tiles, including rubbing and polishing complete, on
20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) :
11.19.1 Light shade pigment using white cement sqm 1295.20
11.19.2 Medium shade pigment using 50% white cement, 50% ordinary
cement sqm 1312.10

11.19.3 Dark shade pigment using ordinary cement sqm 1240.75

11.19.4 Ordinary cement without any pigment sqm 1185.30
11.20 Chequerred precast cement concrete tiles 22 mm thick in footpath &
courtyard, jointed with neat cement slurry mixed with pigment to match
the shade of tiles, including rubbing and cleaning etc. complete, on 20
mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
11.20.1 Light shade pigment using white cement sqm 1233.05
11.20.2 Medium shade pigment using 50% white cement 50% Grey cement
sqm 1160.00

11.20.3 Dark shade pigment using ordinary cement sqm 983.95

11.20.4 Ordinary cement without any pigment sqm 928.50
11.21 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved
make and colour using acid and/or alkali resisting mortar
bedding, and joints filled with acid and/or alkali resisting cement as per
IS : 4457, complete as per the direction of Engineer-in- Charge.
11.21.1 In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof
 cement : 4 coarse sand)
11.21.1.1 Acid and alkali resistant tile sqm 1515.45
11.21.2 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)
11.21.2.1 Acid and alkali resistant tile sqm 1637.70

11.22 Tile work in skirting, risers of steps and dado up to 2 m height over 12
mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey
cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of
matching shade complete.

11.22.1 Marble tiles (polished) Raj Nagar

11.22.1.1 8 mm thick sqm 1298.80
STONE FLOORING
11.23 Marble stone flooring with 18 mm thick marble stone, as per sample of marble
approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4
(1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and
polishing complete with :

11.23.1 Makrana white second quality sqm 3377.45

11.23.2 Raj Nagar plain sqm 1992.70
11.23.3 Agaria White sqm 2608.15
11.23.4 Black Zebra sqm 2685.05
11.23.5 Udaipur green marble sqm 2100.40
11.23.6 Pink plain marble sqm 2200.40
11.24 Extra for pre finished nosing to treads of steps of marble stone. metre 593.30
11.25 Extra for marble stone flooring in treads of steps and risers using single length
up to 2.00 metre. sqm 701.50

KOTA STONE FLOORING

11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed
with grey cement slurry mixed with pigment to match the shade of the slab, including
rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse
sand) :

11.26.1 25 mm thick sqm 1706.60

11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid
on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with
grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing
and polishing complete.
sqm 2038.55
SAND STONE FLOORING
11.28 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of
cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush.

11.28.1 Red sand stone sqm 988.35

11.28.2 White sand stone sqm 1017.80
11.29 40 mm thick fine dressed stone flooring over 20 mm (average) thick
base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement
mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of
stone.
11.29.1 Red sand stone sqm 1193.30
11.29.2 White sand stone sqm 1222.75
11.30 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement
mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement
mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone
and pointing with same mortar.

11.30.1 Red sand stone sqm 1292.00

11.30.2 White sand stone sqm 1321.45
11.31 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
metre 157.35

11.32 Extra for Kota stone/ sand stone in treads of steps and risers using single
length up to 1.05 metre. sqm 36.35

WOODEN FLOORING
11.33 25 mm wooden planking, tongued and grooved in flooring, including fixing with
iron screws complete with :
11.33.1 Second class teak wood sqm 4187.95
11.33.2 Second class deodar wood sqm 2800.10
11.34 38 mm thick wood block flooring of first class teak wood laid over 25 mm thick
leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 10 mm nominal size) to be paid separately, coated with a thin layer of hot
bitumen penetration 80/25 (blown type) @ 2.45 kg per sqm, including fixing blocks in
position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth
and finished complete.

sqm 10543.40
11.35 Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S.
flat 10x5 mm, 10 cm long, forked at end 60cm apart (minimum three lugs to be provided),
including necessary welding and applying a priming coat of approved primer on exposed
surface etc. complete.
kg 142.85
CERAMIC GLAZED TILES
11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness
to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved
make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick
cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3
kg/sqm including pointing the joints with white cement and matching pigment etc.,
complete.

sqm 935.60
11.37A Providing and fixing 1st quality ceramic glazed floor tiles conforming to
IS : 15622 (thickness to be specified by the manufacturer ) of approved make
in all colours, shades except burgundy, bottle green, black of any size as
approved by Engineer-in-Charge in skirting, risers of steps and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing
with grey cement slurry @ 3.3kg per sqm including pointing in white
cement mixed with pigment of matching shade complete.

sqm 938.50
11.38 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness
to be specified by the manufacturer), of 1st quality conforming to IS : 15622,
of approved make, in all colours, shades, except White, Ivory, Grey, Fume
Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4
Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including
pointing the joints with white cement and matching pigments etc., complete.

sqm 1107.05
11.39 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm
or more (thickness to be specified by the manufacturer), of 1st quality
conforming to IS : 15622, of approved make, in colours White, Ivory, Grey,
Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4
Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including
grouting the joints with white cement and matching pigments etc., complete.

sqm 1142.80
11.40 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm
or more (thickness to be specified by the manufacturer), of 1st quality
conforming to IS : 15622, of approved make, in all colours, shades, except
White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4
(1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm
including pointing the joints with white cement and matching pigments etc.,
complete.

sqm 1225.10
VITRIFIED FLOOR TILES
11.41 Providing and laying vitrified floor tiles in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08% and
conforming to IS: 15622, of approved make, in all colours and shades, laid on
20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey
cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement
and matching pigments etc., complete.

11.41.1 Size of Tile 500x500 mm sqm 1334.35

11.41.2 Size of Tile 600x600 mm sqm 1416.65
11.41.3 Size of Tile 800x800 mm sqm 1879.95
11.41.4 Size of Tile 1000x1000 mm sqm 2551.95
11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to
be specified by the manufacturer) with water absorption less than 0.08% and
conforming to IS:15622, of approved brand & manufacturer, in all colours and
shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)
jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with
white cement and matching pigments etc. The tiles must be cut with the zero
chipping diamond cutter only . Laying of tiles will be done with the notch
trowel, plier, wedge, clips of required thickness, leveling system and rubber
mallet for placing the tiles gently and easily.

11.41A.1 Double charge vitrified tile polished finish of size

11.41A.1.1 Size of Tile 600 x 600 mm sqm 1286.60
11.41A.1.2 Size of Tile 800 x 800 mm sqm 1372.80
11.41A.1.3 Size of Tile 600 x 1200 mm sqm 1407.05
11.41A.1.4 Size of Tile 800 x 1600 mm sqm 1702.05
11.41A.1.5 Size of Tile 1000 x 1000 mm sqm 1633.45
11.41A.2 Glazed vitrified floor tiles polished finish of size
11.41A.2.1 Size of Tile 600 x 600 mm sqm 1359.20
11.41A.2.2 Size of Tile 600 x 1200 mm sqm 1612.75
11.41A.2.3 Size of Tile 800 x 800 mm sqm 1544.20
11.41A.2.4 Size of Tile 800 x 1200 mm sqm 1859.60
11.41A.2.5 Size of Tile 1200 x 1200 mm sqm 2298.45
11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size
11.41A.3.1 Size of Tile 600 x 600 mm sqm 1311.05
11.41A.3.2 Size of Tile 600 x 1200 mm sqm 1612.75
11.41A.3.3 Size of Tile 800 x 800 mm sqm 1544.20
11.41A.3.4 Size of Tile 800 x 1200 mm sqm 1859.60
11.41A.3.5 Size of Tile 1200 x 1200 mm sqm 2572.75
11.42 Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse
sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm. sqm 735.30

11.43 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer
modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm
thickness.
sqm 633.60
11.44 Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1
cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with
ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having
specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length
upto 6 mm , mixing fibre @ 125 grams per 50 kg of cement in cement mortar, including
providing and mixing water proofing material in mortar @ 1 kg

per 50 kg of cement, all complete as per direction of Engineer-in-charge. sqm 815.45

11.45 Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on
150 mm thick sub grade of compacted bed of 20 mm thick nominal size
stone aggregate and base course and filling with 150 mm thick jamuna
sand, including spreading, well ramming, consolidating and finishing smooth
etc. all complete as per direction of Engineer-in-charge. sqm 1613.00
11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified
by manufacturer), with water absorption less than 0.08 % and
conforming to I.S. 15622, of approved make, in all colours & shade, in
skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1
cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/
sqm including grouting the joint with white cement & matching pigments
etc. complete.
11.46.1 Size of Tile 500x500 mm sqm 1384.20
11.46.2 Size of Tile 600x600 mm sqm 1466.50
11.46.3 Size of Tile 800x800 mm sqm 1932.75
11.46.4 Size of Tile 1000x1000 mm sqm 2604.75
11.46A Providing and fixing glazed screen printed border tile 75mm wide having
thickness 5mm, of approved quality & make, in all shades, design and
prints, in dado, over 12mm thick bed of cement mortar 1:3 (1 Cement : 3
Coarse sand) and jointing with grey cement slurry @ 3.3 kg/sqm
including pointing with white cement mixed with pigment of matching
shade, all complete as approved by Engineer - in - Charge metre 169.40

11.47 Providing and laying Vitrified tiles in different sizes (thickness to be

specified by the manufacturer), with water absorption less than 0.08%
and conforming to IS: 15622, of approved brand & manufacturer, in all
colours and shade, in skirting, riser of steps, laid with cement based
high polymer modified quick set tile adhesive (water based) conforming to IS:
15477, in average 6 mm thickness, including grouting of joints
(Payment for grouting of joints to be made separately).
11.47.1 Size of Tile 500x500 mm sqm 1593.85
11.47.2 Size of Tile 600x600 mm sqm 1676.15
11.47.3 Size of Tile 800x800 mm sqm 2142.40
11.47.4 Size of Tile 1000x1000 mm sqm 2814.40
11.48 Grouting the joints of flooring tiles having joints of 3 mm width, using
epoxy grout mix of 0.70 kg of organic coated filler of desired shade
(0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting
and finishing complete as per direction of Engineer-in-charge.
11.48.1 Size of Tile 500x500 mm sqm 312.15
11.48.2 Size of Tile 600x600 mm sqm 258.65
11.48.3 Size of Tile 800x800 mm sqm 205.15
11.48.4 Size of Tile 1000x1000 mm sqm 146.60
11.49 Providing and laying Vitrified tiles in floor with different sizes (thickness
to be specified by the manufacturer), with water absorption less than 0.08% and
conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid
with cement based high polymer modified quick set tile adhesive (water based)
conforming to IS : 15477, in average 6 mm thickness, including grouting of joints
(Payment for grouting of joints to be made separately).

11.49.1 Size of Tile 500x500 mm sqm 1455.10

11.49.2 Size of Tile 600x600 mm sqm 1537.40
 11.49.3 Size of Tile 800x800 mm sqm 2003.65
11.49.4 Size of Tile 1000x1000 mm sqm 2675.65
11.50 Deduct for not grouting the joints with white cement and matching pigment in
the items of fixing of vitrified tiles. sqm 11.70

11.51 Providing and laying machine cut, mirror polished, Italian Marble stone flooring
laid in required pattern in linear portion of the building all complete as per architectural
drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement
mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4
kg/sqm including pointing with white cement slurry admixed with pigment to match the
marble shade including rubbing, curing and polishing etc. all complete as specified and as
directed by the Engineer-in-Charge.

11.51.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire
Red or Dark Emperadore etc. sqm 6095.50

11.52 Providing and laying machine cut, mirror polished Marble stone flooring, in
required design (Simple geometrical, abstract etc.) and in patterns in combination with
Italian marble stones of different colours, shades and finished surface texture etc., in
linear portions of the building, all complete as per the architectural drawings, with 18 mm
thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4
coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing
with white cement slurry admixed with pigment to match the marble shade, including
rubbing, curing and polishing etc. all complete as specified and as directed by the
Engineer-in-Charge.

11.52.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire
Red or Dark Emperadore etc. sqm 6389.40

11.53 Providing and fixing Glass mossaic tiles on finished plain wall surface of size
20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction
of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help
of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The
rate is inclusive of all operation, material and required pattern approved by
Engineer-in-Charge:

sqm 3282.50
11.54 Providing and fixing removable raised/false access flooring with system
and its components of approved make for different plenum height with possible height
adjustment upto 50 mm, comprising of modular load bearing floor panels supported on
G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the
architectural drawings, as specified and as directed by Engineer-in-charge consisting of:
 (a) Providing at required spacing to form modular framework, pedestals made
out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully
welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the
bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm
welded with GI fully threaded stud 16mm outer diameter with two GI Check
nuts screwed on the stud for level adjustment upto 50mm, locking and
stabilizing the pedestal head in position at the required level. The pedestals
shall be fixed to the subfloor (base) through base plate using epoxy based
adhesive of approved make or the machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized of

rectangular size 570x20x30x0.80mm thick having holes at both ends for
securing the stringers on to the pedestal head using fully threaded screws
ensuring maximum lateral stability in all directions, the grid formed by the
pedestal and stringer assembly shall receive the floor panel, this system shall
provide adequate solid, rigid support for access floor panel, the system shall
provide a minimum clear uninterrupted clearance between the bottom of the
floor for electrical conduits and wiring etc. all complete as per the architectural
drawings, as specified and as directed by the Engineer-in-charge.

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade
Filled Steel anti static high pressure Lamination of 800H grade (FS800H).
Access Floor panel shall be steel welded construction with an enclosed
bottom pan with uniform pattern of 64 hemispherical cones. The top and
bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot
welded together (minimum 64 welds in each dome and 20 welds along each
flange). The panel should be Corroresist epoxy coated for lifetime rust
protection and cavity formed by the top and bottom plate is filled with Pyrogrip
noncombustible Portland cementitious core mixed with lightweight foaming
compound. The access floor shall be factory finished with Anti-static High
Pressure laminate with Non Warp technology upto 1mm thickness for superior
adhesion and Surface flatness within 0.75mm.The panel is to withstand a
Concentrated Load of 363 kgs applied on area 25mm x 25mm without
collapse in the centre of the panel which is placed on four steel blocks. The
panel will withstand and Uniformly Distributed Load (UDL) minimum 1250
kg/sqm and an impact load of 50kg all complete as per the approved
manufacturers specification and as per the direction of Engineer-in-
charge. All specification must be printed on the side of the panel to ensure the
quality of the product.

11.54.1 300 mm Finished Floor Height (FFH) sqm 5094.10

11.54.2 450 mm Finished Floor Height (FFH). sqm 5407.15
11.55 Providing and laying flamed finish Granite stone flooring in required design
and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 mm thick stone slab
over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4
coarse sand) laid and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching shade including
rubbing, curing and polishing etc. all complete as specified and as
directed by the Engineer-in-Charge :
 11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown,
Cat Eye or equivalent. sqm 2589.90

11.56 Providing and laying Polished Granite stone flooring in required design and
patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 mm thick stone slab
over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4
coarse sand) laid and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching shade including
rubbing, curing and polishing etc. all complete as specified and as directed by
the Engineer-in-Charge.
11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or
equivalent sqm 3908.80

11.56.2 Polished Granite stone slab of all colour and texture except
Black, Cherry/Ruby Red sqm 2677.90
SUB HEAD : 12.0
ROOFING
 247

BASIC RATES (SH: 12.0 ROOFING)

Code Description Unit Rate
No.

0013 Machine for rubbing of floors day 300.00

0100 Bandhani day 714.00

0101 Bhisti day 714.00
0102 Blacksmith 1st class day 784.00
0103 Blacksmith 2nd class day 714.00
0111 Carpenter 1st class day 784.00
0112 Carpenter 2nd class day 714.00
0114 Beldar day 645.00
0115 Coolie day 645.00
0116 Fitter (grade 1) day 784.00
0117 Assistant Fitter or 2nd class Fitter day 714.00
0122 Mason (for plaster of paris work) 1st class day 784.00
0123 Mason (brick layer) 1st class day 784.00
0124 Mason (brick layer) 2nd class day 714.00
0128 Mate day 714.00
0130 Mistry day 784.00
0131 Painter day 714.00
0139 Skilled Beldar (for floor rubbing etc.) day 714.00
0155* Mason (average) day 749.00
0222 Seam bolts and nuts 6 mm dia and 25 mm long 10 Nos 10.00
0223 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement
corrugated sheet 6 mm thick sqm 225.00

0224 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement
close fitting adjustable ridge metre 210.00

0225 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement
corrugate serrated adjustable ridge metre 210.00

0226 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement
plain wing adjustable ridge metre 210.00

0227 Fibre (high impact poly propelene reinforced) cement unserrated adjustable
ridge for hips metre 210.00

0228 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement
corrugated apron piece metre 200.00

0229 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement
eaves filler piece each 175.00

0230 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement
north light curves metre 280.00

0231 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement
ventilator curves each 310.00

0232 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement
barge boards boards 6 mm thick metre 400.00

0233 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement
ridge finial pair 165.00

0234 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement
special north light curves each 555.00

0235 Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement S
type louvers each 260.00

0236 Multi purpose fibre reinforced by organic fibres and/or inorganic synthetic
fibres cement board 6 mm thick sqm 210.00

0242 6 mm thick mulitipurpose cement bonded wood particle board conforming to

IS : 14276 sqm 195.00

0295 Stone Aggregate (Single size) : 20 mm nominal size cum 1400.00

0297 Stone Aggregate (Single size) : 10 mm nominal size cum 1350.00
0308 Bhusa quintal 500.00
0309 Paving bitumen of grade VG-10 of approved quality tonne 25614.00
0314 Bitumen hot sealing compound : grade A kg 29.00
0328 White face insulating board: 12 mm thick sqm 235.00
0332 Natural colour insulating board: 12 mm thick sqm 210.00
0336 Flame retardant face insulating board: 12 mm thick sqm 320.00
0341 Flat pressed 3 layer particle board (medium density) Grade 1, 12 mm thick
sqm 288.00

0367 Portland Cement (OPC-43 Grade) tonne 5000.00

0368 White Cement tonne 11200.00
0370 Coal (steam) quintal 440.00
0452 Brass screws 25 mm 100 Nos 100.00
0637 Bright finished or black enameled mild steel screws 40 mm 100 Nos 60.00
0765 Hessian cloth sqm 35.00
0771 Kerosene oil litre 50.00
0811 Mud (dry) cum 165.00
0845 Roofing paint for iron sheets in red colour litre 120.00
0865 Pig lead kg 130.00
0869 Plaster of Paris kg 5.00
0870 Plug each 10.00
0875 Red, chocolate, orange, buff or yellow (red oxide of iron) light shade pigment
kg 60.00

0886 Standard holder bat clamps for sand cast iron or cast iron pipes 150 mm dia
each 45.00

0966 Sand Cast iron plain shoe 150 mm dia each 285.00
0982 Coarse sand (zone III) cum 1500.00
0992 Galvanised steel plain sheets quintal 5000.00
0994 Standard quality hard board sheet 3 mm thick sqm 135.00
0996 Standard quality hard board sheet 4.5 mm thick sqm 210.00
1001 Spun yarn kg 50.00
1008 Flats up to 10 mm in thickness quintal 4850.00
1015 Mild steel expanded metal 20x60 mm strands 3.25 mm wide
1.60 mm thick sqm 280.00

1022 Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots
10 Nos 38.00

1023 Galvanised steel J or L hooks 8 mm dia 10 Nos 120.00

1024 Galvanised steel bolts & nuts 10 mm dia and 125 mm long round head with
slots each 9.00

1025 Mild steel bolts 6 mm dia and 25 mm long with hexagonal head 10 Nos 10.00
1031 Galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded
with 4 galvanised steel nuts each 20.00

1032 Galvanised steel bolts 10 mm dia and 7 cm long with nuts each 6.00
1174 Red sand stone slab 45 mm to 50 mm thick (un-dressed) sqm 260.00
1175 White sand stone slab 45 mm to 50 mm thick (un-dressed) sqm 280.00
1190 Second class teak wood in planks 10 cudm 791.00
1196 First class kail wood in planks 10 cudm 300.00
1204 Precast heat resistant terrace tiles (size 300x300 mm) and 20 mm thick
sqm 409.00

1207 G.I. Limpet washer 100 Nos 21.00

1208 Bitumen washer 100 Nos 30.00
1209 G.I. plain washer thick 100 Nos 35.00
1210 G.I. plain washer thin 100 Nos 21.00
1211 G.I. plain washer for seam bolts 100 Nos 32.00
1213 Water proofing materials kilogram 35.00
1219 M.S. Wire nails kilogram 58.00
1220 M.S. Wire mesh (rabbit) sqm 42.00
1331 M.S. Holder bat clamp of approved design for 100 mm S.C.I. pipe each 30.00
1984 Common burnt clay F.P.S. bricks tile class designation 10 1000 Nos 4600.00
2202 Carriage of Stone aggregate below 40 mm nominal size cum 163.93
2203 Carriage of Coarse sand cum 163.93
2204 Carriage of Timber cum 187.35
2205 Carriage of Steel tonne 145.72
2207 Carriage of Brick tiles 1000 Nos 262.29
2209 Carriage of Cement tonne 145.72
2211 Carriage of Tar / Bitumen tonne 163.93
2216 Carriage of Stone blocks white & red sand stone & kota stone slab tonne 145.72
2273 Carriage of A.C.sheet and accessories tonne 145.72
2302 Carriage of G.I. sheet and accessories tonne 145.72
2308 Carriage of Plaster of paris tonne 145.72
3002 Polyvinyl chloride sheet 400 micron thick sqm 45.00
3004 Stone ware spouts 100 mm dia 60 cm long each 45.00
3050 Galvanised steel corrugated sheets quintal 6000.00
3051 Aluminium troughed profile sheet 0.56mm thick with center to center pitch of
200 mm, depth of 32 mm, overall profile width 1092 mm, cover width
1000mm)
sqm 549.00
3052 Aluminium troughed profile sheet 0.71mm thick with center to center pitch of
200 mm, depth of 32 mm, overall profile width 1092 mm, cover width 1000mm

sqm 698.00
3053 Aluminium troughed profile sheet 0.91mm thick with center to center pitch of
200 mm, depth of 32 mm, overall profile width 1092 mm, cover width 1000mm

sqm 895.00
3054 Aluminium profile sheet 0.56mm thick with center to center pitch of 175 mm,
depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall
profile width of 1144mm, cover width 1050mm

sqm 730.00
3055 Aluminium profile sheet 0.71mm thick with center to center pitch of 175 mm,
depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall
profile width of 1144mm, cover width 1050mm

sqm 924.00
3056 Aluminium profile sheet 0.91mm thick with center to center pitch of 175 mm,
depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall
profile width of 1144mm, cover width 1050mm

sqm 1182.00
3057 Aluminium Circular(sinusoidal) profile sheet 0.56mm thick with center to center
pitch of 75 mm, depth of 19 mm, overall profile width 1250mm,cover width
1150mm
sqm 520.00
3058 Aluminium Circular(sinusoidal) profile sheet 0.71mm thick with center to center
pitch of 75 mm, depth of 19 mm, overall profile width 1250mm,cover width
1150mm
sqm 670.00
3059 Aluminium Circular(sinusoidal) profile sheet 0.91mm thick with center to center
pitch of 75 mm, depth of 19 mm, overall profile width 1250mm,cover width
1150mm
sqm 870.00
3060 Precoated Aluminium troughed profile sheet 0.56mm thcik with center to
center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover
width 1000mm
sqm 636.00
3061 Precoated Aluminium troughed profile sheet 0.71mm thick with center to
center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover
width 1000mm
sqm 809.00
3062 Precoated Aluminium troughed profile sheet 0.91mm thick with center to
center pitch of 200 mm, depth of 32 mm, overall
profile width1092 mm, cover width 1000mm
sqm 1038.00
3063 Aluminium color coated profile sheet 0.56mm thick with center to center pitch
of 175 mm, depth of 46mm, top crest width of 41mm,
bottom valley width of 80mm, overall profile width of 1144mm, cover

width 1050mm sqm 846.00

3064 Aluminium color coated profile sheet 0.71mm thick with center to center pitch
of 175 mm, depth of 46mm, top crest width of 41mm, bottom valley width of
80mm, overall profile width of 1144mm, cover width 1050mm

sqm 1071.00
3065 Aluminium color coated profile sheet 0.91mm thick ith center to center pitch of
175 mm, depth of 46mm, top crest width of 41mm, bottom valley width of
80mm, overall profile width of 1144mm, cover width 1050mm

sqm 1370.00
3066 Aluminium profile sheet 0.56mm thick with center to center pitch of
177.5 mm, depth of 28.5 mm, 987mm overall profile width, cover width
900mm
sqm 680.00
3067 Aluminium profile sheet 0.71mm thick with center to center pitch of
177.5 mm, depth of 28.5 mm, 987mm overall profile width, cover width
900mm
sqm 872.00
3068 Precoated/Mill finish Aluminium plain ridges 0.71 mm TCT/plain and 500- 600
mm wide metre 564.00

3069 Precoated/Mill finish Aluminium flashings/aprons 0.50mm TCT/plain and wide

upto 600 mm metre 544.00

3070 Precoated/Mill finish Aluminium plain north light cuves metre 584.00
3071 Precoated/mill finish aluminium Barge board (Upto 200 mm) metre 487.00
3072 Precoated/Mill finish Aluminium crimp curve sqm 538.00
3073 Precoated/Mill finish Aluminium gutter metre 725.00
3074 Stainless steel self tapping screw of 6x50mm with SS hex cap and 3mm thick
EPDM seal 100 Nos 500.00

4009 Mild steel tubes hot finished welded type kg 60.00

4202 Red oxide Zinc chromate primer litre 120.00
7009 12.5 mm thick tapered edge plain gypsum plaster borad confirming to IS 2095
(Part 1):2011 sqm 140.00

7010 Galvanised Steel ceiling section (size 80x26x0.50 mm) metre 46.00
7011 Galvanised Steel perimetre Channel (Size 20x27x30x0.50 mm) metre 22.00
7012 Galvanised Steel intermediate Channel (Size 15x45x15x0.90 mm) metre 38.00
7013 Galvanised Steel angle hanger (Celling angle) (Size 25x10x0.50 mm) metre 12.00
7014 Galvanised Steel connecting clips (2.64 mm dia and 230 mm long GI wire)
each 4.00

7015 Galvanised Steel soffit cleat (Size 27x37x25x0.60 mm) each 3.00
7016 Joint filler kg 24.00
7017 Joint finisher kg 21.00
7018 Joint tape roll roll 90.00
7019 Dash fastener / Chemical fastener each 12.50
7020 All drive screws (for gypsum board) 100 Nos 58.00

7021 Primer (for gypsum board) litre 70.00

7028 12.5 mm thick Fully Perforated gypsum board sqm 380.00
7031 12.5 mm thick tapered edge moisture resistant plain gypsum plaster board
confirming to IS 2095 (Part 1):2011 sqm 250.00

7050 PU Primer sqm 50.00

7051 40 mm (average) PU spray having 40-45 kg/m3 density sqm 350.00
7052 GI wire netting 3/4" x 24 G sqm 26.00
7053 400 G polythene sheet sqm 12.00
7090 Expanded polystyrene type N- Normal 50 mm thick sqm 120.00
7091 Expanded polystyrene type - SE 50 mm thick sqm 140.00
7187 C.I. grating 150 mm dia, weighing not less than 440 gm each 27.00
7188 U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 75 mm dia
metre 70.00

7189 U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 110 mm dia
metre 130.00

7190 U-PVC pipes (working pressure 4 kg / cm²) Rubber (Seal) Ring 75 mm dia
each 8.00

7191 U-PVC pipes (working pressure 4 kg / cm²) Rubber (Seal) Ring 110 mm dia
each 11.00

7192 uPVC coupler for UPVC drainage pipes 75 mm each 18.00

7193 uPVC coupler for UPVC drainage pipes 110 mm each 39.00
7194 uPVC pushfit coupler (single) 75 mm thick each 18.00
7195 uPVC pushfit coupler (single) 110 mm thick each 32.00
7196 uPVC single equal Tee (without door) 75x75x75 mm each 46.00
7197 uPVC single equal Tee (without door) 110x110x110 mm each 81.00
7198 uPVC single equal Tee (with door) 75x75x75 mm each 59.00
7199 uPVC single equal Tee (with door) 110x110x110 mm each 92.00
7208 UPVC bend 87.5° 75 mm bend each 35.00
7209 UPVC bend 87.5° 110 mm bend each 59.00
7212 UPVC plain shoe 75 mm each 27.00
7213 UPVC plain shoe 110 mm each 47.00
7214 UPVC pipe clip 75 mm each 15.00
7215 UPVC pipe clip 110 mm each 14.00
7231 Resin Bonded Glass wool 16 kg/m³ : 50 mm thick sqm 90.00
7232 Resin Bonded Glass wool 24 kg/m³ : 50 mm thick sqm 130.00
7238 High Albedo paint kg 215.00
7266 Pressed clay tiles 20mm thick 250x250 mm size 1000 Nos 8000.00
7267 Plain ceiling tiles (BWP type phenol formaldehyde synthetic resin bonded)
(600x600x12 mm) each 105.00

7268 Semi perforated ceiling tiles (600x600x12 mm) each 100.00

7273 Resin Bonded Rockwool 48 kg/m3 sqm 110.00
7385 3 mm thick translucent white acrylic plastic sheet sqm 490.00
7386 12 mm thick particle board ceiling tile sqm 95.00
7388 Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt each 10.00
7857 P.T.M.T. Grating square slit 150 mm each 45.00
7904 Machine moulded common burnt clay tile bricks of class designation 12.5
1000 Nos 4600.00

8589 Calcium Silicate tegular edged celling tiles 595x595 mm and 15 mm thick on
edges sqm 685.00

8590 Galvanised Steel main Tee ceiling section Size 24x38x0.33 mm (3 metre long)
each 140.00

8591 Galvanised Steel perimeter wall Angle Size 24 x 24 x 0.40 mm (3.00 metre
long) each 90.00

8592 Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33mm (1.2

metre long) each 45.00

8593 Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33mm (0.6

metre long) each 22.00

8594 Galvanised Steel soffit cleat size 25x35x1.60 mm each 4.50

8595 Wooden screws with plastic rawl plugs 35x8 mm each 1.00
8597 GI Metal Tile Clip in Plain Beveled edge global white colour tiles of size
600x600 mm and 0.5 mm thick sqm 710.00

8598 GI Metal Tile Clip in Perforated Beveled edge global white colour tiles of size
600x600 mm and 0.5 mm thick sqm 800.00

8599 GI Metal Tile Lay-in Plain Tegular edge global white color tiles of Size
595x595 mm and 0.5 mm thick sqm 625.00

8600 GI Metal Tile Lay-in Perforated Tegular edge global white color tiles of Size
595x595 mm and 0.5 mm thick sqm 735.00

8601 PVC Laminated Gypsum Tiles (Square edge) of Size 595x595 mm and 12.5
mm thick sqm 880.00

8602 Gypsum Tiles Fully Perforated Square edge of Size 595x595 mm and 12.5
mm thick sqm 380.00
8604 Spring T-section 24x34x0.45 mm (3.00 meter long) metre 220.00
8605 C Wall angle section 20x30x20x0.50 mm (3.00 meter long) metre 110.00
8606 Main C Carrier Size 10x38x10x0.70 mm (3.00 meter long) metre 130.00
8607 Spring T-connector each 5.00
8608 C Carrier Connector each 12.00
8609 C Suspension Clip each 10.00
8610 Wire Coupling Clip each 10.00
8611 Main T ceiling sections 24x38x0.3 mm (3 metre long) each 130.00
8612 Perimeter wall angle 24 x 24 x 0.3 mm (3 metre long) each 80.00
8613 Intermediate cross T-Section 24x25x0.3 mm (1.2 m long) each 40.00

8614 Intermediate cross T-Section 24x25x0.3 mm (0.6 m long) each 20.00

8615 Hanger rod 4 mm thick each 10.00
8616 Adjustment clip 85x30x0.8 mm each 6.00
8617 Soffit cleat (Size 27x37x25x1.60 mm) each 5.00
8618 Dash fastener 6 mm dia 50 mm long each 10.00
8667 UV stabilised 2 mm thick plain FRP sheet sqm 450.00
8668 UV stabilised 2 mm thick corrugated FRP sheet sqm 525.00
8669 Mangalore ridge tiles 20 mm thick each 8.00
8670 Mangalore tiles 20 mm thick each 8.00
8671 Precoated galvanised iron profile sheet 0.50 mm TCT sqm 375.00
8672 Precoated galvanised steel plain ridges 0.50 mm TCT and 500-600mm wide
metre 225.00

8673 Precoated galvanised steel flashings/aprons 0.50 mm TCT and upto 600mm
wide metre 235.20

8674 Precoated galvanised steel gutter 600mm overall girth metre 440.00
8675 Precoated galvanised steel north light curves metre 240.00
8676 Precoated galvanised steel barge board (upto 300mm ) metre 230.00
8677 Precoated galvanised steel crimp curve sqm 235.00
8699 8 mm thick tapered edge calcium silicate board sqm 270.00
8784 8 mm thick Calcium silicate perforated tiles of size 595 x595 mm sqm 850.00
9977 Carriage L.S. 2.12
9988 Carriage and sundries L.S. 2.12
9999 Sundries L.S. 2.12

12.0 ROOFING
Code Description Unit Rate
No.
 SHEET ROOFING

12.1 Providing corrugated G.S. sheet roofing including vertical / curved surface
fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with
bitumen and G.I. limpet washers or with G.I. limpet washers filled with white
lead, including a coat of approved steel primer and two coats of approved
paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical
or curved surfaces), excluding the cost of purlins, rafters and trusses and
including cutting to size and shape wherever required.

12.1.1 1.00 mm thick with zinc coating not less than 275 gm/m² sqm 1320.35
12.1.2 0.80 mm thick with zinc coating not less than 275 gm/m² sqm 1135.45
12.1.3 0.63 mm thick with zinc coating not less than 275 gm/ m² sqm 978.00
12.2 Extra for straight cutting in C.G.S. sheet roofing for making opening of area
exceeding 40 sq. decimeter for chimney stacks, sky light etc.:

12.2.1 1.00 mm thick metre 95.60

12.2.2 0.80 mm thick metre 76.50
12.2.3 0.63 mm thick metre 76.50
12.3 Extra for circular cutting in C.G.S. sheet roofing for making opening of area
exceeding 40 sq. decimeter:

12.3.1 1.00 mm thick metre 552.85

12.3.2 0.80 mm thick metre 441.60
12.3.3 0.63 mm thick metre 441.60
12.4 Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed
with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and
bitumen washers complete.

12.4.1 0.80 mm thick with zinc coating not less than 275 gm/m² metre 822.15
12.4.2 0.63 mm thick with zinc coating not less than 275 gm/m² metre 750.85
12.5 Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer
coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen
washers complete :

12.5.1 1.60 mm thick with zinc coating not less than 350 gm/m² metre 1370.40
12.6 Providing and fixing of 40 cm overall width plain G.S. sheet fixed with polymer
coated J or L hooks, bolts and nuts, G.l. limpet and bitumen washer complete,
bent to shape and fixed in wall with cement mortar 1:3 (1 cement : 3 coarse
sand).

12.6.1 1.00 mm thick with zinc coating not less than 275 gm/m² metre 700.20
12.7 Providing and fixing 15 cm wide, 45 cm overall semi-circular plain
G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including
making necessary connections with rain water pipes complete.

12.7.1 0.80 mm thick with zinc coating not less than 275 gm/m² metre
12.7.2 0.63 mm thick with zinc coating not less than 275 gm/m² metre
12.8 Providing reinforced by organic fibres and/or inorganic synthetic fibres cement
6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with
polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or
with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins,
rafters and trusses), including cutting sheets to size and shape wherever required.

sqm 462.10
12.9 Extra for straight cutting in reinforced by organic fibres and/or inorganic
synthetic fibres cement corrugated, semi corrugated 6 mm thick sheet roofing for making
openings of area exceeding 40 square decimeter for chimney stacks, skylights etc.

metre 76.50
12.10 Extra for circular cutting in reinforced by organic fibres and/or inorganic
synthetic fibres cement corrugated/ semi corrugated 6 mm thick sheet roofing for making
openings of area exceeding 40 square decimeter.

metre 211.25
12.11 Extra for providing and fixing wind ties of 40x 6 mm flat iron section. metre 163.65
12.12 Providing and fixing ridges and hips in fibre cement reinforced by organic
fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self
drilling fastener and EPDM washer etc. complete.

12.12.1 Corrugated serrated adjustable ridges metre 444.75

12.12.2 Plain wing adjustable ridges metre 444.75
12.12.3 Close fitting adjustable ridges metre 498.60
12.12.4 Unserrated adjustable hips metre 443.75
12.13 Providing and fixing fibre cement reinforced by organic fibres and/or inorganic
synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts
and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self
drilling fastener and EPDM washer etc. complete:

12.13.1 Corrugated apron pieces metre 364.40

12.13.2 Eave's filler pieces metre 296.25
12.13.3 North light curves metre 493.55
12.13.4 Ventilator curves metre 535.95
12.13.5 Barge boards metre 631.20
12.13.6 Ridge finials pair 262.40
12.13.7 Special north light curves each 878.55
12.13.8 S type louvers metre 476.70
12.14 Providing flat iron brackets 50x3 mm size with necessary bolts,
nuts and washers etc. for fixing G.S. sheets gutters with purlins. metre 77.00
12.15 Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand a
cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene o
complete :
12.15.1 With residual type petroleum bitumen of grade VG -10 sqm 133.15
12.16 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 m
thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered
tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weig
cement and finished neat:
12.16.1 With common burnt clay F.P.S.(non modular) brick tile
of class designation 10 sqm 905.80
12.17 10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 m
mud mortar with bhusha @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow-dung) and covered with mach
moulded tile bricks, grouted with cement mortar 1:3 ( 1 cement : 3 fine sand) mixed with 2% of integral water proofing compoun
weight of cement and finished neat.
12.17.1 With machine moulded common burnt clay F.P.S. (non modular) brick tiles of class designation 12.5,
conforming to IS 2690 sqm 905.80
12.18 Extra for every additional 1 cm thickness of mud phaska. sqm 20.35
12.19 Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed wit
integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and fini
neat:
12.19.1 With common burnt clay F.P.S. (non modular) brick tiles
of class designation 10 sqm 549.05
12.20 Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roof
jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of
thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.
sqm 620.00
12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down
gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

12.21.1 In 75x75 mm deep chase metre 260.20

12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm
nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement
plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and
making and finishing the outlet complete.

each 266.60
12.23 Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1
cement : 4 coarse sand) over wooden karries or
R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to
be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement :
3 fine sand ) complete :

12.23.1 Red sand stone slab

12.23.1.1 40 to 50 mm thick sqm 907.95
12.23.2 White sand stone slab
12.23.2.1 40 to 50 mm thick sqm 937.35
CEILING
12.24 Providing and fixing insulating board ceiling of approved quality with necessary
nails etc. complete (frame work to be paid separately) :
12.24.1 Natural colour insulating board
12.24.1.1 12 mm thick sqm 774.15
12.24.2 White face insulating board
12.24.2.1 12 mm thick sqm 810.90
12.24.3 Flame retardant face insulating board
12.24.3.1 12 mm thick sqm 936.00
12.25 Providing and fixing flat pressed 3 layer medium density particle board or
graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc.
complete (frame work to be paid separately):

12.25.1 12 mm thick sqm 888.20

12.26 Providing and fixing plain multipurpose cement board(Hight pressure steam
cured) with suitable screws for cement particle board in ceiling etc. complete (frame work
to be paid seperatately).
12.26.1 6 mm thick Cement fiber board as per IS: 14862 sqm 773.40
12.26.2 6 mm thick Cement bonded wood particle board as per IS:14276
sqm 751.30

12.27 Extra for Circular cutting including wastages in ceiling with:

12.27.1 2nd class teak wood planks 20 mm thick metre 635.00
12.27.2 Natural colour insulating board
12.27.2.1 12 mm thick metre 402.55
 12.27.3 White face insulating board:
12.27.3.1 12 mm thick metre 407.15
12.27.4 Flame retardant face insulating board:
12.27.4.1 12 mm thick metre 422.70
12.27.5 Standard quality hard board sheet:
12.27.5.1 3 mm thick metre 388.70
12.27.5.2 4.5 mm thick metre 402.50
12.28 Extra for providing and fixing ceiling to curved surfaces in narrow widths
sqm 373.00

12.31 Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a

height of 5 m above floor level, over first class kail wood strips 25x6 mm
with 10 mm gap in between and reinforced with rabbit wire mesh fixed to
wooden frame (frame work to be paid separately):

12.31.1 Flat surfaces sqm 1421.25

12.31.2 Curved surfaces sqm 1708.05
12.32 Extra for sunk or raised mouldings in the plaster of Paris (Gypsum
anhydrous) ceiling. sqm 485.75

12.33 Extra for providing plaster of Paris (Gypsum anhydrous) ceiling above 5 sqm per metre
metres height from floor level. height 218.90

12.34 Providing fixing thermal insulation of ceiling (under deck insulation) with
Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg /
m3, 50mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling
with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x
24 gauge wire mesh, for top most ceiling of building.

sqm 597.85
12.35 Providing and fixing thermal insulation with Resin Bonded Fibre glass
wool conforming to IS: 8183. Density 16 kg/m³, 50 mm thick, wrapped in
200G Virgin Polythene bags placed over existing false ceiling and held in
position by criss-crossing GI wire.
sqm 242.80
12.36 Thermal Insulation of roofing with Expanded polystyrene fixed with
suitable adhesive to the false ceiling as per the directions of the
Engineer-in-charge:
12.36.1 With Type N - Normal 50 mm thick sqm 276.85
12.36.2 With Type SE - Self Extinguishing type 50 mm thick sqm 306.30
RAIN WATER SPOUT AND PIPE
12.37 Providing and fixing 100 mm diameter and 60 cm long rain water spout in
cement mortar 1:4 (1 cement : 4 fine sand).
12.37.1 Stone ware spout each 142.10
12.38 Providing and fixing M.S. holder bat clamps of approved design to
C.I. or S.C.I. rain water pipes embedded in and including cement
concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) and cost of cutting holes
and making good the walls etc. :
12.38.1 100 mm diameter each 308.45
12.38.2 150 mm diameter each 328.55
12.39 Providing lead caulked joints to sand cast iron rain water pipes and
fittings:
12.39.1 100 mm dia Pipe each 444.05
12.39.2 150 mm dia Pipe each 604.65
12.40 Providing, fixing and embedding sand cast iron accessories for rain water
pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that
of masonry (lead caulking will be paid for separately):

12.40.1 Sand cast iron plain shoes :

12.40.1.1 150 mm diameter each 431.10
12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,
leaving 10 mm gap for thermal expansion,
(i) Single socketed pipes.

12.41.1 75 mm diameter metre 213.00

12.41.2 110 mm diameter metre 319.75
12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/
accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,
including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal
expansion.

12.42.1 Coupler
12.42.1.1 75 mm each 79.80
12.42.1.2 110 mm each 119.95
12.42.2 Single pushfit Coupler
12.42.2.1 75 mm each 79.80
12.42.2.2 110 mm each 110.60
12.42.3 Single tee with door
12.42.3.1 75x75x75 mm each 141.55
12.42.3.2 110x110x110 mm each 205.45
12.42.4 Single tee without door
12.42.4.1 75x75x75 mm each 124.20
12.42.4.2 110x110x110 mm each 190.75
12.42.5 Bend 87.5°
12.42.5.1 75 mm bend each 91.80
12.42.5.2 110 mm bend each 132.00
12.42.6 Shoe (Plain)
12.42.6.1 75 mm Shoe each 81.10
12.42.6.2 110 mm Shoe each 115.95
12.43 Providing and fixing unplasticised -PVC pipe clips of approved design
to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs,
screwed with M.S. screws of required length, including cutting brick work and fixing in
cement mortar 1:4 (1 cement
: 4 coarse sand) and making good the wall etc. complete.
12.43.1 75 mm each 310.85
 12.43.2 110 mm each 309.50
12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15
cm diameter and weighing not less than 440 grams. each 47.90

12.45 Providing and fixing false ceiling at all height including providing and fixing of
frame work made of special sections, power pressed from
M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per
IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of
27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash
fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the
angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and
other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at
the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom
wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm
centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel
with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,
including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and
30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at
450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of
gypsum board to ceiling section and perimeter channel with the help of dry wall screws of
size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered
and square edges of the board with recommended jointing compound , jointing tapes ,
finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint
and two coats of primer suitable for board, all as per manufacturer's specification and also
including the cost of making openings for light fittings, grills, diffusers, cutouts made with
frame of perimeter channels suitably fixed, all complete as per drawings, specification and
direction of the Engineer in Charge but excluding the cost of painting with :

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming

to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

sqm 1145.95
12.45.2 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG)
board conforming to IS: 2095- (Part 3):1996 (Boards with BIS certification
marks)
sqm 1286.45
12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board
sqm 1300.50

12.45.4 Fully Perforated Gypsum Plaster Board of size 1200 x

2400x12.5 mm having approx. 15 % perforated area with perforation size and
pattern as approved by the Engineer- in-charge and as per manufacturer's
specification, with all 4 side tapered and backed by acoustical tissue with NRC
value not less than 0.60

sqm 1483.15
12.46 Providing and fixing to the inlet mouth of rain water pipe PTMT (an
Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm
and weighing not less than 100 gms.
each 72.00
12.47 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to
any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I
plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The
sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3%
ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They
shall be of uniform pigmentation and thickness without air pockets and shall conform to IS
10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented,
textured or smooth as specified.

12.47.1 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or

6" ) as specified sqm 1179.25

12.47.2 2 mm thick flat sqm 1048.50

12.48 Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness and of approved size and as per approved pattern on steel frame work complete
(steel frame work to be paid separately).

sqm 346.65
12.49 Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm
thickness and of approved pattern on steel frame work complete (steel frame work to be
paid separately).
sqm 77.75
12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and
pitch of corrugation as approved by Engineer-in-charge)
0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS:
277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and
polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns
minimum to avoid scratches during transportation and should be supplied in single length
upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self
drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch
in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses
and including cutting to size and shape wherever required.

sqm 671.55
12.51 Providing and fixing precoated galvanised steel sheet roofing accessories
0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS:
277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and
polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

12.51.1 Ridges plain (500 - 600mm) metre 450.60

12.51.2 Flashings/ Aprons.( Upto 600 mm) metre 412.85

12.51.3 North light curves metre 465.25

12.51.4 Barge board (Upto 300 mm) metre 384.20
12.51.5 Crimp curve sqm 422.50
12.51.6 Gutter (600 mm over all girth) metre 1110.60
12.52 Providing and fixing tiled false ceiling of specified materials of size 595x595
mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized
steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T"
runner with suitably spaced joints to get required length and of size 24x38 mm made from
0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size
24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main
"T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of
length 600 mm and size 24x25 mm made of
0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to
form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling
tiles of approved texture in the grid including, required cutting/making, opening for
services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners
to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to
ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with
galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to
center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted
with polyester paint, all complete for all heights as per specifications, drawings and as
directed by Engineer-in-charge.

12.52.1 GI Metal Ceiling Lay in plain Tegular edge Global white color tiles
of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet
having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically
polyester powder coated of thickness 60 microns (minimum), including factory
painted after bending.

sqm 1591.70
12.52.2 GI Metal Ceiling Lay in perforated Tegular edge global white color
tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet
having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation
area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of
0.5, electro statically polyester powder coated of thickness 60 microns
(minimum), including factory painted after bending and perforation, and
backed with a black Glass fiber acoustical fleece.

sqm 1746.25
12.52.3 12.5 mm thick square edge PVC Laminated Gypsum Tile of size
595x595 mm, made of Gypsum plasterboard, manufactured from natural
gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire
retardant PVC film on the face side and 12micron metalized polyester on
the back side with all edges sealed with

the face side PVC film which goes around and wraps
the edges and is bonded to the edges and the back side metalized
polyester film so as to make the tile a completely sealed unit.

sqm 1948.95
 12.52.4 12.5 mm thick fully Perforated Gypsum Board tile made from
plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595
mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of
48 mm and the side borders of 30 mm, backed with non woven tissue on the
back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm
resin bonded glass wool backing.

sqm 1247.50
12.53 Providing and Fixing 15 mm thick densified tegular edged eco friendly light
weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true
horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel
sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’
runner suitably spaced at joints to get required length and of size 24x38 mm made from
0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size
24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between
main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross
‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be
inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting
on periphery walls /partitions on a Perimeter wall angle pre-coated steel of
size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs
at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and
laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the
grid, including, cutting/ making opening for services like diffusers, grills, light fittings,
fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from
ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and
50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of
size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom
exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all
heights, as per specifications, drawings and as directed by Engineer-in-Charge.

sqm 1718.70
Note :- Only calcium silicate false ceiling area will be measured from wall to
wall. No deduction shall be made for exposed frames/opening (cut outs)
having area less than 0.30 sqm.The calcium silicate ceiling tile shall have
NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as
per B.S. 476 part IV, 100% humidity resistance and also having thermal
conductivity <0.043 w/mK.
12.54 Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm
module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of
0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves
and wooden screws at 300 mm center to centre, suspending the main C carrier of size
10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat
37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main
carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24
mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier
and in direction perpendicular to it at 600 mm centers with help of suspension brackets.
Wherever the main C carrier and spring T have to join, C carrier and spring T connectors
have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing
with clip in tiles into spring T with :

12.54.1 GI Metal Ceiling Clip in plain Beveled edge global white color tiles
of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet
having galvanizing of 100 gms/ sqm (both sides inclusive) and electro
statically polyester powder coated of thickness 60 microns (minimum),
including factory painted after bending.

sqm 1871.80
12.54.2 GI Metal Ceiling Clip in plain Beveled edge global white color tiles
of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet
having galvanizing of 100 gms/ sqm (both sides inclusive) and 20%
perforation area with 1.8 mm dia holes and having NRC of 0.5, electro
statically polyester powder coated of thickness 60 microns (minimum),
including factory painted after bending and perforation.

sqm 1998.25
12.55 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20
mm) with SRI (solar refractive index) > 78, solar reflection
> 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20
mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting
the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and
polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm
height along the parapet walls in the same manner.

sqm 1444.90
12.56 Providing and laying roof insulation with 40 mm thick impervious sprayed,
closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt.
III (density of foam being 40-45 kg/ cum), over a coat of polyurethane primer applied @ 6-
8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing
course of 40 mm thick cement screed 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate
20 mm nominal size) in chequered rough finish, in panels of 2.5 m x 2.5 m and
embedding with 24 G wire netting and sealing the joints with polymerized mastic, all
complete as per direction of Engineer-in-Charge.

sqm 1363.95
12.57 Providing and fixing thermal insulation with Resin Bonded Fibre glass
wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G
Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position
by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge.

sqm 307.35
12.58 Providing and fixing tiled false ceiling of specified materials of size 595x595
mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized
steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T"
runner with suitably spaced joints to get required length and of size 24x38 mm made from
0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size
24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main
"T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of
length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be
interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall
angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid
including, required cutting/making, opening for services like diffusers, grills, light fittings,
fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI
slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm
long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size
85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed
width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for
all heights as per specifications, drawings and as directed by Engineer-in-charge.

12.58.1 8 mm thick fully perforated calcium silicate board made with

Calcareous & Siliceous materials reinforced with cellulose fiber manufactured
through autoclaving process to give stable crystalline structure with
minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq.
cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum
perforated area 18 % with non woven tissue on the back side, having an NRC
( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg
/cum backing.

sqm 1851.50
12.59 Providing & fixing false ceiling at all height including providing & fixing of
framework made of special section, power pressed from
M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per
IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of
27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener
12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle
hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other
end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the
spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick
 bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixe
direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I
every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm lon
perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall sc
@ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help
wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square ed
the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layer
covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's
specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with fram
perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge
excluding the cost of painting with:
12.59.1 8 mm thick Calcium Silicate Board made with Calcareous

& Siliceous materials reinforced with cellulose fiber

manufactured through autoclaving process. sqm 1330.40

12.60 Providing and fixing thermal insulation of ceiling (under deck insulation)
with Resin Bonded Rockwool conforming to IS: 8183,density 48 kg/ m3, 50 mm thick,
wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm)
@ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building.

sqm 568.45
12.61 Providing and fixing thermal insulation with Resin bonded rock wool
conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin
Polythene bags placed over existing false ceilng and held in position by criss-crossing Gl
wire.
sqm 272.25
12.62 Providing and fixing thermal insulation with Resin Bonded rock wool
conforming to IS: 8183, having density 48 kg/m3,50 mm thick,wrapped in 200 G
Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held and in
position by criss cossing GI wire etc. complete as per directions of Engineer- in- Charge.

sqm 277.90
12.63 Providing and applying two coats of High Albedo paint having minimum
Solar Reflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per
ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating
thickness and the methodology of application shall strctly as per manufacturer's
specifications and as approved by Engineer-in-Charge. Surface preparation includes
cleaning with metal wire brush to remove all dust, fungus etc., washing with water all
complete. The contractor shall give guarantee for the perfomance of SRI and also the
durabitity of coating, all complete as per direction of Engineer-in-Charge.

sqm 309.55
12.64 Providing & fixing at all heights, levels and locations Mill finish
Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code
with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or r
pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal wash
all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/fr
work
shall be paid separately).

12.64.1 0.56 mm, Aluminium troughed profile with center to center

pitch of 200 mm, depth of 32 mm, overall profile width1092
mm, cover width 1000mm. sqm 928.95
12.64.2 0.71 mm, troughed profile with center to center pitch of
200 mm, depth of 32 mm, overall profile width1092 mm,
cover width 1000mm. sqm 1158.80
12.64.3 0.91 mm, troughed profile with center to center pitch of
200 mm, depth of 32 mm, overall profile width1092 mm,
cover width 1000mm. sqm 1452.20
12.64.4 0.56mm Aluminium profile with center to center pitch of
175 mm, depth of 46mm, top crest width of 41mm,
bottom valley width of 80mm, overall profile width of
1144mm, cover width 1050mm. sqm 1201.20
12.64.5 0.71mm Aluminium profile with center to center pitch of
175 mm, depth of 46mm, top crest width of 41mm,
bottom valley width of 80mm, overall profile width of
1144mm, cover width 1050mm. sqm 1488.90
12.64.6 0.91mm Aluminium profile with center to center pitch of
175 mm, depth of 46mm, top crest width of 41mm,
bottom valley width of 80mm, overall profile width of 1144mm,
cover width 1050mm. sqm 1871.50

12.64.7 0.56mm Aluminium Circular (sinusoidal) profile with center to

center pitch of 75 mm, depth of 19 mm, overall profile
width 1250mm,cover width 1150mm. sqm 916.85
12.64.8 0.71mm Aluminium Circular (sinusoidal) profile with center
to center pitch of 75 mm, depth of 19 mm, overall profile
width 1250mm,cover width 1150mm. sqm 1147.10
 12.64.9 0.91mm Aluminium Circular (sinusoidal) profile with center
to center pitch of 75 mm, depth of 19 mm, overall profile
width 1250mm,cover width 1150mm. sqm 1454.10
12.65 Providing & fixing at all heights, levels and locations colour finish
Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code
with
characteristics of good formability and corrosion resistance. The
profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self
drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour,
scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work
be paid separately).

12.65.1 0.56 mm, Aluminium Color coated troughed profile with

center to center pitch of 200 mm, depth of 32 mm, overall profile width1092
mm, cover width 1000mm.
sqm 1058.60
12.65.2 0.71 mm, Aluminium Color coated troughed profile with center to
center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover
width 1000mm.
sqm 1316.35
12.65.3 0.91 mm, Aluminium Color coated troughed profile with center to
center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover
width 1000mm.
sqm 1657.55
12.65.4 0.56mm Aluminium color profile with center to center pitch of 175
mm, depth of 46mm, top crest width of 41mm, bottom valley width of 80mm,
overall profile width of 1144mm, cover width 1050mm.

sqm 1373.25
12.65.5 0.71mm Aluminium color coated profile with center to center pitch
of 175 mm, depth of 46mm, top crest width of 41mm, bottom valley width of
80mm, overall profile width of 1144mm, cover width 1050mm.

sqm 1706.90
12.65.6 0.91mm Aluminium color coated profile with center to center pitch
of 175 mm, depth of 46mm, top crest width of 41mm, bottom valley width of
80mm, overall profile width of 1144mm, cover width 1050mm.

sqm 2150.30
12.65.7 0.56 mm Aluminium profile with center to center pitch of
177.5 mm, depth of 28.5 mm, 987mm overall profile width, cover width 900mm

sqm 1126.00
12.65.8 0.71 mm Aluminium profile with center to center pitch of
177.5 mm, depth of 28.5 mm, 987mm overall profile width, cover width 900mm

sqm 1410.45
12.66 Providing and fixing of Pre-coated colour or mill finish Aluminium
Roofing Accessories in 0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)] Fo
coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/ ta
SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete :
12.66.1 Precoated/mill finish aluminium Ridges plain
(500- 600mm) metre 969.50

12.66.2 Precoated/mill finish aluminium Flashings/ Aprons

(Upto 600 mm) metre 885.50

12.66.3 Precoated/mill finish aluminium North light curves metre 971.55

12.66.4 Precoated/mill finish aluminium Barge board (Upto 200 mm)
metre 748.20

12.66.5 Precoated/mill finish aluminium Crimp curve metre 829.05

12.66.6 Precoated/mill finish aluminium Gutter (600 mm over all girth)
metre 1616.00
MENT
UBLIC WORKS

RATES
uekZ.k Hkou] ubZ fnYyh 110011 Central Public Works Department Nirman Bhawan, New Delhi- 110011 Tel : 23062556 / 1317, Fax : 23061884
 me to time is a
ddition to CPWD, this
ndertakings, Architects

mber of
iling materials,
1981, 1985, 1989,

on of this DSR has

doption of new
ated in the DSR 2021

art of Shri D.C.Goel

by Shri Divakar
timator, Shri
officers in CSQ unit in

and architects in
x fuekZ.k Hkou] ubZ fnYyh 110011 Central Public Works Department Nirman Bhawan, New Delhi- 110011 Tel : 23063389, Fax : 23061833E-M

es existing items of DSR

(c) addition of new items in

fore 01.04.2021. The labour

vt. of Delhi/ Govt. of India,

2020, having base 100 as on

having base 100.
ously based on market rates

p-to-date correction slips.

ween English and Hindi

erials available in the

ve been made with reference

ome of the items with excess/
ss cement upto 10% of the
 isting items
& Recycled
t limit are
ontent in design

m no. 8.2.3

d.
s are added.
1.53.2 based

ed.
added.

orporated as

L are added.

item nos.

ive of the
head. These
owing are the
iles (items no. 26.92 & 26.93).
6.3 for bamboowood, item no.
g tiles, item no. 26.42, 26.43 &
onolithic construction on RCC
members are made.
of misleading content etc. have
been undertaken.
this edition of Delhi Schedule
ri Divakar Agrawal SE (TAS),
r Sah Chief Eastimator (TAS),
Shri Naveenkumar P JE(TAS),
s and staff of CSQ unit whose
reparation of this document in
ted with substantial inputs; the
it is indebted for their support.
sufficient data base of market
edition of DSR in a short time.
that some errors are still there
AS), CPWD, Room No. 418A,
011 (Tele fax. 011-23062339).
for improvement are welcome.
dra Goel ADG(Tech) CPWD

PAGE No.

7
 9

75

79

89

99

103

115

135

145

153

165

219

229

247
PAGE No.

273

291
307

317

345

373

431

447

455

465

477

485

491

501

547

591
RATES
 Basic rate
as on or just
before
01.04.2021

800.00
800.00
3000.00
400.00
3940.00
250.00
350.00

7700.00

210.00

750.00
700.00
350.00
300.00
6000.00

3000.00

750.00
3750.00
6000.00
250.00
7000.00
250.00
300.00
3500.00
35000.00

3500.00

3000.00

30000.00

7000.00
37.30
3000.00
500.00
11500.00
800.00
1350.00
3500.00
3000.00
4500.00
1200.00
1200.00

1600.00

800.00
10000.00
550.00
8000.00
13000.00
1200.00
600.00
925.00
1500.00
2400.00
800.00
1300.00
3.30
600.00
300.00
1200.00
200.00
 200.00
950.00
450.00
700.00
15000.00
13000.00
1500.00
800.00
2400.00
15000.00
3000.00
400.00
300.00
3.30
8500.00
450.00

12000.00

7500.00
3000.00
1500.00
1400.00

2000.00

190.00

4000.00

40000.00

160.00
400.00
500.00
 5.00
200.00

10000.00

of wages for weekly day of

Basic rate
as on or
just before
01.04.2021

714.00

714.00
784.00
714.00
784.00
714.00
645.00
645.00
645.00
784.00
714.00
714.00
784.00
784.00
714.00
714.00
784.00
784.00
714.00
645.00
 784.00
714.00
645.00
645.00
645.00
714.00
714.00
Basic rate
as on or just
before
01.04.2021

714.00

714.00
784.00
749.00
749.00
784.00
784.00
853.00
645.00

534.00

773.00

784.00
853.00

645.00

784.00
714.00
853.00
 Basic rate
as on or just
before
01.04.2021

10.00

225.00

210.00

210.00

210.00

210.00

200.00

175.00

280.00

310.00

400.00

165.00

555.00

260.00

210.00

220.00

470.00
300.00
625.00
170.00
 195.00

215.00

634.00

789.00
10.00
15.00
25.00
475.00
741.00
957.00
957.00
957.00
367.00
398.00
430.00
650.00
650.00
650.00
1000.00
1000.00
1300.00
1350.00
1400.00
1350.00
1350.00
1400.00
40.00
250.00
1000.00
400.00
500.00
25614.00
30800.00
32950.00
34790.00
29.00
47.00
360.00
70.00
80.00
70.00
12.00
30.00
40.00
15.00
 235.00
210.00

320.00
375.00

288.00

230.00

155.00

500.00
38.00
195.00
230.00
190.00
280.00
325.00
1300.00
14.00
450.00
20.00
20.00
5000.00
11200.00
25.00
440.00
130.00
80.00
400.00
775.00
625.00
380.00
155.00
1309.00
997.00

838.00

2610.00
2300.00
2090.00
1870.00
425.00
285.00
250.00
480.00
400.00
390.00
257.00

205.00
154.00
103.00
150.00
130.00
90.00
144.00
133.00
103.00
185.00
175.00

400.00

310.00
160.00
600.00
574.00
510.00
400.00
345.00
45.00

126.00

100.00

95.00

110.00
170.00
168.00
36.00
740.00
670.00
575.00
610.00
290.00
140.00
190.00
45.00
36.00
220.00
170.00
140.00
100.00
95.00
125.00

170.00

46.00

55.00
2.00

905.00

805.00
690.00
 421.00
180.00
255.00
455.00
640.00
160.00
140.00
125.00

470.00

90.00

140.00

120.00

100.00

500.00
80.00
300.00
290.00
240.00
180.00
160.00
185.00
260.00
340.00
40.00

135.00

80.00

56.00

49.00

39.00
75.00
60.00
45.00
40.00
35.00
5.00
125.00
90.00
65.00
55.00
335.00
300.00
235.00
200.00
 140.00
120.00
100.00
160.00
140.00
120.00
40.00
90.00
80.00
49.00
39.00
43.00
34.00
29.00
20.00
20.00
15.00
12.00
128.00
108.00
79.00
76.00
62.00
49.00
36.00
32.00
560.00
393.00
393.00
270.00
324.00
275.00
226.00
196.00
147.00
128.00
580.00
481.00
383.00
304.00
226.00
324.00
275.00
231.00
142.00

1800.00

1600.00

1400.00

1000.00
 900.00

890.00

300.00

130.00

135.00

265.00

70.00

320.00
500.00
75.00
26.00
35.00
400.00
350.00
275.00
50.00

15.00

300.00
600.00
370.00
290.00
1130.00
189.00
250.00
120.00
40.00
94.00

200.00

105.00

50.00

500.00
165.00
200.00
13.00
150.00
225.00
100.00
90.00
175.00
165.00
270.00
100.00
 120.00
170.00
38.00
230.00
100.00
115.00
115.00
130.00
28.00
130.00
6.00
5.00
10.00
10.00
70.00

60.00

56.00

45.00

285.00
527.00
48.00
1400.00
800.00
300.00
260.00

800.00

800.00

40.00
90.00
1500.00
900.00
5000.00
5700.00
135.00
210.00
300.00
48.00
50.00
4850.00
4750.00
4850.00
4900.00
4850.00
4950.00
4850.00
4950.00
5400.00

54.00
 90.00
4850.00

280.00

32.00
5100.00

430.00

38.00

120.00

9.00

10.00
25.00
80.00
5500.00
25.00

20.00

6.00
5200.00
5300.00
37.00
27.00
90.00
20.00
80.00
5000.00
1100.00
600.00
1100.00
80.00
205.00
800.00
230.00
250.00
220.00
320.00
250.00
260.00
280.00
800.00
900.00
700.00

1100.00

880.00
850.00
776.00
791.00
440.00
 431.00
500.00
300.00
260.00
260.00
600.00

650.00
285.00
265.00
245.00
409.00
21.00
30.00
35.00
21.00
32.00
35.00
2.00
2.00
600.00
75.00
50.00
58.00
42.00
6100.00
120.00
150.00
4800.00
4120.00
275.00
300.00
260.00
150.00
135.00
80.87

10.00

150.00
1000.00
3209.00
84.00
2049.00
8.70
13.00
18.00
160.00
223.00
535.00
500.00
0.14
28.00
 34.00

30.00
600.00

90.00

40.00

75.00

1800.00
125.00
210.00
250.00
88.00

200.00

40.00
40.00
50.00
67.50
30.00
27.00
35.00
37.00
44.00
50.00
210.00
225.00
210.00
225.00
30.00
480.00
477.00
1400.00
910.00
4400.00
2300.00
140.00
160.00
220.00
100.00
40.00
55.00
65.00
25.00

16.00
18.00
20.00
20.00
 25.00
40.00
45.00
50.00
73.00
92.00
110.00
125.00
450.00
950.00
210.00
3800.00
3800.00
5700.00
5250.00
340.00

310.00

425.00

525.00

610.00

190.00
275.00
310.00
450.00
95.00
130.00
196.00
225.00
290.00
360.00
415.00
525.00
18.00
25.00
65.00
452.00
70.00

1050.00

1135.00

1750.00

210.00
280.00
475.00
290.00
350.00
315.00
405.00
390.00
455.00
410.00
615.00
525.00
730.00
215.00
265.00
35.00
55.00
115.00
145.00
230.00
310.00
525.00
575.00

6.10

525.00

575.00

625.00

725.00

300.00
355.00
350.00

435.00

425.00

550.00

500.00

600.00

285.00
485.00
180.00
270.00

30.00

35.00

35.00

48.00
 700.00
210.00
220.00
365.00
450.00
775.00
950.00
1150.00
1500.00
1825.00
2550.00
2950.00
3250.00
3575.00
35.00
37.00
55.00
56.00
110.00
120.00
145.00
160.00
225.00
240.00
295.00
315.00
375.00
1500.00
2000.00
3175.00
3915.00
5200.00

9450.00
1750.00
2350.00
4500.00
5570.00
6510.00
13650.00
70.00
125.00
200.00
300.00
350.00
525.00
1300.00
1500.00
2500.00
410.00
325.00
110.00
125.00
25.00
 55.00
625.00
270.00
280.00
325.00

190.00

225.00

315.00
325.00
300.00
220.00
115.00
155.00
230.00
470.00
1053.00
215.00
240.00
230.00
325.00
375.00
415.00
500.00

625.00
1080.00
1625.00
350.00
475.00
575.00
840.00
1525.00
2300.00
2450.00
2610.00
3650.00
7600.00
10980.00
15500.00
725.00
725.00
425.00
85.00
100.00
475.00
1290.00
1025.00
11.50
13.00
15.00
17.50
17.00
 17.00
27.00
31.00
37.00

2500.00

9800.00

103.00
11.00
4600.00
5200.00
187.35
437.15
163.93
163.93
187.35

145.72
178.19
262.29
163.93
145.72
163.93
192.86
145.72
218.58
437.15
728.59
1249.01
1561.26
204.92
178.19
178.19
163.93
163.93
163.93
163.93
163.93
163.93
163.93
145.72
145.72
145.72
358.32
597.20
1380.48
1706.30
3981.36
145.72
5972.04
145.72
145.72
 163.93
145.72
178.19
358.32
478.64
597.20
971.45
1380.48
1706.30
2388.82
3257.48

3981.36
3981.36
5972.04
3981.36
8958.06
11944.08
11944.08
11944.08
163.93
11944.08
145.72
16.39
358.32
597.20
971.45
1380.48
1706.30
2388.82
3257.48
3981.36
3981.36
5972.04
5972.04
5972.04
8958.06
11944.08
17700.00
286.00
381.00
286.00
31.00
41.00
72.00
83.00
114.00
2912.00
3328.00
4160.00
156.00
3193.00
4120.00
5562.00
 309.00

515.00

628.00

2472.00
2884.00
3468.00
306.00
510.00
775.00
6120.00
36.00

62.00

57.00
88.00
93.00
108.00
77.00

686.00

20.00

48.00

33.00
357.00

172.00

63.00
73.00
99.00
125.00
884.00

905.00

1010.00

469.00

609.00

877.00

439.00

582.00
 21.00
134.00
2153.00
32.00
6.00

650.00

455.60

1500.00

1450.00

113.00
772.00
402.00

270.00

312.00

380.00

468.00

598.00
4590.00
4080.00

543.00
31.00
21.00
332.00
102.00
104.00
484.00
156.00

11.00

37.00

4.00
22.00
 61.00
1030.00
670.00
132.00
1390.00
36.00
87.00
36.00
260.00
122.00
255.00
7.00
125.00
245.00
6.00
1100.00
480.00
55.00

3.15

3.10

180.00

25500.00
250.00
400.00
240.00
510.00
145.00

160.00

740.00
145.00
210.00
70.00
3.00
690.00
400.00
460.00

525.00
550.00
750.00
700.00
500.00
700.00
650.00
880.00
1200.00
480.00
700.00
 650.00
880.00
1400.00
1360.00
1360.00
1400.00
1400.00
550.00
600.00
1200.00
1200.00
30.00
24500.00
45.00
45.00
6000.00

549.00

698.00

895.00

730.00

924.00

1182.00

520.00

670.00

870.00

636.00

809.00

1038.00
 846.00

1071.00

1370.00

680.00

872.00

564.00

544.00

584.00
487.00
538.00
725.00

500.00

40.00

40.00

400.00
550.00
750.00

950.00
1550.00
1100.00

300.00

550.00
2600.00
2700.00
3300.00
4100.00
8900.00
15000.00
18500.00
6000.00
210.00

1170.00

1150.00
 400.00
300.00
300.00
200.00
300.00
280.00
500.00
350.00
500.00
390.00
630.00
470.00

630.00

500.00
600.00
650.00
800.00

900.00

430.00

330.00

540.00

450.00

550.00

730.00

230.00
300.00
400.00
310.00
390.00
360.00
460.00
410.00
300.00
300.00
210.00
300.00
180.00
220.00
360.00
110.00
9100.00
5100.00

310.00
 500.00

650.00

945.00

1160.00

1500.00

215.00

270.00

315.00

395.00

535.00

640.00

255.00

375.00

310.00

380.00

470.00

690.00

720.00

605.00

990.00

1030.00

835.00

375.00

450.00

520.00
 580.00

670.00

955.00

305.00

430.00

575.00

940.00

1520.00

2010.00

500.00

585.00

720.00

895.00

1250.00

1500.00

575.00

715.00

710.00

900.00

905.00

915.00

1280.00

1265.00

1290.00

1570.00

1540.00
1550.00

1500.00

560.00

615.00

690.00

730.00

755.00

840.00

845.00

1159.00

1346.00

1920.00

2307.00

440.00

495.00

580.00

955.00

1020.00
1565.00

2400.00

405.00

480.00

505.00

665.00

970.00

1415.00

1895.00

640.00

860.00

1180.00

1917.00

2088.00

3227.00

525.00
 790.00

1045.00

1440.00

2635.00

2998.00

320.00

415.00

515.00

720.00

1565.00

1720.00

415.00

1110.00

1526.00

885.00

895.00

1025.00

1805.00

1885.00

2130.00
 3680.00

950.00

1280.00

649.00

900.00

870.00

70.00

75.00

90.00
15.00
230.00
120.00
200.00
220.00
250.00
60.00
70.00
50.00

55.00
35.00
120.00
120.00
300.00
35.00
300.00
210.00
22.00
318.00

680.00

500.00
150.00
60.00
180.00

375.00

525.00

540.00

630.00

650.00

835.00

1010.00

2800.00

3250.00

1750.00

2360.00

600.00

1020.00

2260.00

125.00
2152.80

1991.30

2475.00

2260.00
190.00
120.00
60.00
22.00
120.00
25.00
180.00
90.00
20.00
15.00
35.00

12.00

830.00
250.00

250.00

35.00
5000.00
46.00

1450.00
685.00
620.00
1000.00
1300.00

195.00

215.00

280.00
700.00
1200.00
4500.00

140.00

46.00
22.00
38.00
12.00

4.00
 3.00
24.00
21.00
90.00
12.50
58.00
70.00
150.00
8.00
7800.00

480.00

150.00
105.00
380.00

250.00

250.00

420.00

76.00
72.00
7.00
8.00
48.00

42.00
54.00
1300.00
1375.00
450.00
560.00
22.00
12.00
50.00
350.00
26.00
12.00

430.00

100.00
40.00
560.00

35.00

30.00

25.00

500.00

370.00
 550.00
5500.00

1600.00

9000.00
2200.00

4500.00

500.00
570.00
120.00
140.00

3000.00

3500.00

3200.00

3000.00

2200.00

1500.00

1200.00

1600.00
850.00
1000.00
350.00
400.00
290.00

290.00

670.00
115.00

25.00

33.00

35.00

35.00

620.00
4500.00

550.00

700.00

1150.00
 185.00
240.00

675.00

575.00

575.00

670.00

575.00

880.00

1170.00

1620.00

1720.00

1910.00

1620.00

1620.00

1430.00

700.00

95.00
48.00
43.00
2800.00
57.00
27.00
 70.00

130.00

8.00

11.00

18.00
39.00
18.00
32.00
46.00
81.00
59.00
92.00

35.00
59.00
27.00
47.00
15.00
14.00
3.00
70.00
1200.00
7.00
4.00
3.00
70.00
20.00
200.00
260.00
225.00
90.00
130.00
75.00

225.00

335.00

215.00
215.00
240.00
300.00

1500.00

1800.00
38500.00

43000.00

49500.00

13800.00

22800.00

28500.00

13800.00

23100.00
36.00
115.00
130.00
300.00
500.00
500.00
420.00
350.00
8000.00

105.00

100.00
435.00
860.00
28.00
900.00
110.00
200.00
38100.00
155.00

1800.00
 1900.00

1000.00

2000.00

1200.00

2100.00

190.00

305.00

38150.00
10.00
10.00
13.00
14.00
29.00
860.00
38.00
48.00
57.00
67.00
15.00
15.00
240.00
910.00
76.00
59.00
215.00
860.00
255.00
965.00
635.00
46.00
76.00
315.00
290.00
182.00
1480.00
955.00
355.00
910.00
46.00
27.00
10.00
14.00
110.00

575.00

450.00
 500.00
430.00
500.00

240.00

60.00

845.00
70.00

445.00

765.00

1050.00

1430.00

865.00

620.00
235.00
18250.00
7.00
490.00
95.00
40.00
10.00
38.00
15.00
48.00
61.00
67.00
1500.00
20.00
1620.00
145.00
765.00
48.00
65.00
90.00
100.00
60.00
68.00
115.00
55.00
45.00
16.00
125.00
25.00

118.00

3715.00
4525.00

5910.00
2030.00
3143.00
4765.00
5145.00
2680.00
4370.00
5540.00
7860.00
80.00
200.00
160.00
160.00
8.00
10.00
24.00
450.00
62.00
14.00
11.00
800.00
210.00
345.00

538.00

650.00

20.00

480.00

500.00

560.00

850.00

490.00
40.00
52.00
34.00
39.00
200.00
200.00

75.00
110.00

275.00

420.00

820.00

85.00
65.00
95.00
110.00
125.00
145.00
150.00
55.00
58.00
20.00
20.00
29.00
36.00
35.00
58.00
22.00
260.00
350.00
625.00
930.00

700.00

570.00

230.00

160.00

510.00

275.00

400.00

215.00

400.00

375.00

625.00

390.00
 260.00

430.00

360.00

295.00

440.00

310.00

365.00

290.00

270.00

540.00

385.00

275.00

250.00

765.00
1150.00
1575.00
2200.00
2750.00
3350.00
4300.00
5000.00
6270.00
7560.00
10500.00
11350.00
11450.00
13900.00
15550.00

29.00
33.00
60.00
70.00
100.00
116.00
210.00
250.00
270.00
356.00
510.00
 600.00
705.00
910.00
1080.00
12400.00
17200.00

13050.00

18750.00

1100.00
1650.00
2075.00
2950.00
3790.00
4780.00
6150.00
6453.00
9180.00
12150.00
14370.00
857.00
1067.00
1286.00
2190.00
2857.00
3857.00
4619.00
6095.00
7381.00
8571.00
11995.00

5190.00

6200.00

8571.00

9048.00

1310.00

2048.00

3238.00

3905.00

4990.00

6286.00
 8143.00

10381.00

12914.00

17905.00

800.00
1140.00
1400.00
1800.00
2250.00
2650.00
3175.00
3852.00
4350.00
5600.00
7300.00
9100.00
11800.00
12300.00
5000.00
3950.00
5050.00
28000.00
29150.00
27100.00
1126.00
1400.00
490.00
700.00
150.00
200.00
200.00
220.00
500.00
810.00
810.00
815.00
815.00
815.00
780.00
405.00
425.00
135.00
160.00
875.00
1500.00
125.00
205.00
265.00
 270.00
1100.00
835.00
50.00
145.00
910.00
425.00
9.00
500.00

295.00

190.00

175.00

300.00

340.00

400.00

4500.00

1500.00
2000.00
450.00

500.00
950.00
45.00
95.00
110.00
120.00

38.00

52.00

25.00
50.00
68.00
800.00
910.00
450.00
3800.00

4200.00

4800.00

4700.00

4600.00
245.00
160.00
 585.00
175.00
25.00
450.00
650.00
110.00
175.00
280.00
2.00
500.00
45.00
10.00
80.00
2.00
31.00
100.00

210.00

144.00

270.00

735.25

845.00

1074.46

1268.00

1512.37
 1085.93

1248.82

1547.45

1547.45

155.80
632.00
752.00

130.00

260.00
140.00

1650.00

298.74

20.00
10.00

1200.00

6000.00

90.00

600.00

3470.00

115.00
255.00
300.00

3400.00

250.00
255.00
1700.00
1680.00
1675.00

8500.00

11500.00

32000.00

1400.00
 590.00
290.00
1200.00
15.00
55.00
14.00
45.00
3.00
6.00
370.00
990.00
1000.00
480.00
120.00
65.00
60.00
5.00
5.00
30.00
5.00
18.00
365.00
320.00
130.00
450.00
455.00

2635.00

1535.00

1265.00
280.00

311.00

100.00

351.00
396.00

469.00

568.00

135.00

66.00

85.00
 314.00

424.00

418.00

583.00

291.00

357.00
358.00

88.00

98.00

98.00

385.00

2648.00

2570.00
1508.00
1738.00
2098.00
2688.00
3115.00
80.00
120.00
130.00
190.00
210.00
85.00
45.00
300.00
250.00
230.00
150.00
310.00
280.00
180.00
150.00

375.00

275.00

230.00

230.00
180.00
110.00
 90.00
460.00
1000.00
1550.00
535.00
260.00
80.00

90.00
140.00
180.00
280.00
360.00
60.00
110.00
150.00
220.00
410.00
550.00
1100.00
1500.00
160.00
32.00
300.00
200.00
210.00
280.00
90.00
160.00
105.00
230.00
225.00
42.00
42.00
42.00
110.00
220.00
230.00
1800.00
300.00
835.00

925.00

1045.00

190.00
78.00
35.00
26.00
160.00
70.00
550.00
825.00

725.00

900.00

27.00

260.00

125.00

105.00

50.00

210.00
170.00
80.00
35.00

200.00

250.00

290.00

140.00

18.00

550.00

600.00

750.00

37.00

28.00

685.00

140.00

90.00

45.00

22.00

4.50
 1.00
35.00

710.00

800.00

625.00

735.00

880.00

380.00

220.00
110.00
130.00
5.00
12.00
10.00
10.00
130.00
80.00
40.00
20.00
10.00
6.00
5.00
10.00
15.00
500.00
560.00
900.00
1390.00
16.00

48.46

74.82

107.47

162.00

255.00

285.00

425.00

600.00
 890.00

2575.00

49.00
80.00
127.97
165.00
230.00
375.25
793.30
1031.05
1466.75
3145.15
112.00
35.84

2200.00

197.80

225.00

195.00

535.00

925.00

2.18
2650.00
480.00
25.50
25150.00
525.00
48.00
52.64
51.52
59.36
60.00

62.00

41.80
450.00

525.00
8.00
8.00
375.00

225.00

235.20

440.00
 240.00
230.00
235.00
47.04
380.00
476.00
560.00
336.00
5600.00
66.00
72.00
440.00
1443.00

600.00

7.00
42.00
145.00

300.00

330.00

380.00

115.00

270.00
420.00

620.00

60.00
240.00

11.00

166.00

1700.00

480.00

2326.00

2100.00

315.00
2050.00

2000.00

3000.00
28.00
20.00
432.00
 30.00

38.00

23.00

2.60
76.00
720.00
867.00
380.00
294.00

2675.00

9.00

370.00

410.00

265.00

2295.00

2707.00

413.00

1062.00

4702.00

304.00
21500.00

303.00

70.00
5200.00

364.00

2479.00

413.00

2703.00

133.00

130.00

114.00
 60.00

105.00

110.00

212.00

237.00

260.00

361.00

365.00

22500.00

22.00

37.00
20.00
279.00
62.00
17.00
15.00
1750.00

140.00

250.00

310.00

439.50

450.00

850.00
485.00
70.00
96.25
135.00
160.00
180.00
108.50
152.50
161.50
200.00
210.00
210.00
375.00
375.00
390.00
390.00
425.00
425.00
425.00
425.00
425.00
55.00
70.00
95.00
135.00
160.00
175.00
65.00
70.00
105.00
120.00
130.00
160.00
150.00
210.00
250.00
295.00
350.00
190.00
175.00
250.00
295.00
440.00
695.00
915.00
185.00
290.00
290.00
440.00
440.00
440.00
690.00
690.00
690.00
690.00
895.00
895.00
895.00
895.00
895.00

185.00

215.00
215.00

295.00

295.00

295.00

465.00

465.00

465.00

465.00

710.00

710.00

710.00

710.00

710.00

895.00

895.00

895.00

895.00

895.00

895.00

185.00

205.00

205.00

275.00

275.00

275.00
445.00

445.00

445.00

445.00

700.00

700.00

700.00

700.00

700.00

905.00

905.00

905.00

905.00

905.00

905.00

195.00

230.00

240.00

277.00

290.00

355.00

410.00

540.00

595.00

695.00

845.00
 975.00

195.00

230.00

255.00

325.00

325.00

475.00

565.00

649.00

730.00

850.00

1140.00

235.00

280.00

310.00

425.00

645.00

880.00

1210.00

160.00

215.00

215.00

215.00

295.00

480.00

480.00
 710.00

710.00

195.00

225.00

225.00

225.00

290.00

290.00

480.00

480.00

695.00

695.00

48.00
70.00
90.00
175.00
250.00
325.00
220.00
290.00
415.00
3318.00
1659.00
1300.00
651.00
5931.00
28.00
4.50
72.00

120.00

135.00

205.00

290.00
 530.00

630.00
200.00
210.00
340.00
350.00

360.00
370.00
450.00
500.00
550.00
650.00
725.00
850.00
950.00
1000.00
1050.00

600.00

785.00

139.00

161.00

205.00

237.00

254.00

319.00

375.00
 458.00

529.00

114.00

173.00

223.00

1600.00
2.12
2.12
2.12

Basic rate
as on or just
before
01.04.2021

187.35

437.15
163.93
163.93
187.35
145.72
178.19
262.29
163.93
145.72
163.93
192.86
145.72
 218.58
437.15
728.59
1249.01
1561.26
204.92
178.19
178.19
163.93
163.93
163.93
163.93
163.93
163.93
163.93
145.72

145.72
145.72
358.32
597.20
1380.48
1706.30
3981.36
145.72
5972.04
145.72
145.72
163.93
145.72
178.19
358.32
478.64
597.20
971.45
1380.48
1706.30
2388.82
3257.48
 3981.36
3981.36
5972.04
3981.36
8958.06
11944.08
11944.08
11944.08
163.93
11944.08
145.72

16.39
358.32
597.20
971.45
1380.48
1706.30
2388.82
3257.48
3981.36
3981.36
5972.04
5972.04
5972.04
8958.06
11944.08
17700.00
 Rate

2000.00

645.00
645.00
714.00
80.87
318.00
2.12

c.

% CP & OH and 1% Cess Remarks

5 km Beyond Beyond Beyond 5
km 10 km 20 km
upto 10 upto 20 per km per km per
addl. km km km

8 9 10 11 12
217.16 15.48 12.62 10.18
The rate
applicabl

271.45 19.35 15.78 12.73 quantitie

236.04 16.83 13.72 deduction
11.07
cribed perc

434.32 30.96 25.25 20.36 voids men

217.16 15.48 12.62 10.18 the specific
subhead "C
Materials"
236.04 16.83 13.72 11.07

255.48 18.21 14.85 11.98

579.09 41.28 33.66 27.15
347.46 24.77 20.20 16.29
193.03 13.76 11.22 9.05
 s will be
e to net
s after
of pres-
entage for tioned in ation nder arriage of

5 km Beyond Beyond Beyond

193.03 13.76 11.22 9.05

248.18 17.69 14.43 11.64
217.16 15.48 12.62 10.18
21.72 1.55 1.26 1.02
248.18 17.69 14.43 11.64

289.55 20.64 16.83 13.58

579.09 41.28 33.66 27.15
965.15 68.80 56.11 45.25
1654.55 117.94 96.19 77.58
2068.19 147.42 120.23 96.97
2895.46 206.39 168.32 135.76
4136.38 294.84 240.46 193.94
5264.48 375.25 306.04 246.83
5790.93 412.77 336.65 271.52
7238.66 515.97 420.81 339.40

5 km 10 km 20 km
upto 10 upto 20 per
km per km per addl.
km km km
9 10 11 12
 5 km Beyond Beyond Beyond

474.67 33.83 27.59 22.26

634.04 45.19 36.86 29.73
791.11 56.39 45.99 37.09
1286.87 91.73 74.81 60.34
1828.71 130.35 106.31 85.74
2260.32 161.11 131.40 105.98
3164.44 225.56 183.96 148.37
4315.15 307.58 250.86 202.32
5274.07 375.93 306.60 247.28

7911.11 563.90 459.90 370.93

11866.66 845.85 689.85 556.39

15822.21 1127.80 919.80 741.85

5 km 10 km 20 km
upto 10 upto 20 per
km per km per addl.
km km km
9 10 11 12
Unit Rate

terial by mechanical transport including

for all lifts, complete as per directions of

cum 411.30
ent/ plying of load carrying motor vehicle of

etc.

arks

6
licable to net

prescribed
e for voids
the
under

e of Materials"

S.W. pipes

nternal
ed or

C.C.
ers, R.C.
shall be
gth
shall be
e of inter-

Remarks

icable in all cases whether

from
g
e 500 mm dia.
 Rate

3000.00

3750.00
6000.00
7000.00
714.00
714.00
714.00
645.00
645.00
645.00
714.00
714.00
645.00
645.00
645.00
714.00
40.00
 40.00
15.00
50.00
260.00
260.00
80.87
11.00
187.35
163.93
163.93
16.39
1300.00
150.00
2.12

Rate

107.00

862.70

543.40
 4.40

38.20

205.45

412.95
711.35
1184.30

286.85

523.50
846.25
1258.60

255.55

417.35

651.55

127.00
 314.95

376.95

933.35

1074.00

531.85

1316.90

1515.20

726.65

1799.35

2070.50

103.75

256.15
 132.90
145.55
174.00

142.50
169.35
197.60

119.10
134.20
149.95

1596.50

68.55
76.40
89.35

62.35
74.95
91.60

42.40
50.80
64.30

822.05
 20%

25%

253.95

368.65

104.50
187.40

2161.20

28.50

89.90
160.90
257.70
381.40

14.50
 7.40

439.25
1957.15
9084.05
18198.70

200.90

qm of the vertical surface of the

e:

44.70

256.15

35.75

257.55

76.70
234.05

253.95
 Rate

714.00

645.00
5000.00
11200.00
300.00
1130.00
165.00
1500.00
900.00
1100.00
700.00
163.93
163.93
145.72
163.93
163.93
 163.93
2.12

Rate

6626.10

5129.25

4382.15
3713.20
3353.00
3044.30
5699.25

5024.15
4355.20
3995.00
3686.30

5319.25
5347.75
3599.10
9563.75
7790.25

5521.10
823.15

3140.50
 Rate

800.00

400.00

210.00

700.00
350.00
37.30
714.00
645.00
645.00
784.00
784.00
714.00
714.00
741.00
957.00
957.00
957.00
367.00
398.00
430.00
650.00
1300.00
1400.00
1350.00
1350.00
25614.00
5000.00
440.00
 50.00
1500.00
900.00
Rate

35.00

25.00
163.93
163.93
178.19
145.72
163.93
178.19
163.93
163.93
29.00
860.00
240.00
910.00
76.00
59.00
215.00
860.00
255.00
965.00
635.00

370.00

2.12
2.12
2.12

Rate
 7783.65

7555.05

7365.15

7124.50

7226.95

6833.40

5815.05

5122.25

6670.25

5059.85

6326.05

4715.60

6050.65

4440.25
5660.45

6154.75

4645.90

5812.60

4334.20

9793.75

9565.10

9375.20

9130.20

8843.45

7825.10

7132.35

8047.55
6437.15

307.95

669.55
804.25

7783.65

7555.05

9277.75

9050.20

8130.65

7902.85
15762.45

15534.65

12605.35

12500.20

785.70

753.80
 733.00

370.85

362.35

452.25

440.25
57.15

113.85

1294.45
905.50

385.25
 681.65

631.25

596.60
61.90

ved from natural sources,

s as per IS: 9103 to accelerate /

umping of
shuttering and

ll be payable
pecified cement
extra cement.

8033.20

8174.75
 8387.15

8599.50

9655.60

9797.15

10009.50

10221.85

for plain cement

recycled concrete
nd Pozzolana /
accelerate /
ng pumping of
g and finishing as

ble separately. In
the contractor

7102.95

7998.95
 8211.30

8423.65

8725.35

9621.30

9833.70

10046.05
 Rate

800.00

400.00

210.00

700.00
350.00
3500.00
3000.00
37.30
1300.00
2400.00
300.00
1500.00
714.00
784.00
714.00
714.00
645.00
645.00
784.00
784.00
714.00
784.00
714.00
714.00
749.00

210.00

195.00
 741.00

957.00
957.00

1300.00

1400.00
1350.00
40.00
25614.00

34790.00

29.00
47.00
375.00
38.00
5000.00
440.00

56.00

40.00
400.00
350.00
275.00
527.00
1500.00
900.00
5000.00
4850.00
4900.00

280.00

430.00
5200.00
260.00
260.00
2.00
4800.00
4120.00
11.00

187.35
163.93
163.93
187.35
145.72
178.19
145.72
163.93
163.93
163.93
145.72
145.72
286.00
381.00
286.00
31.00
41.00
72.00
83.00
114.00
2912.00
3328.00
4160.00
156.00
3193.00
4120.00
5562.00
2472.00
2884.00
3468.00
36.00
2800.00
29.00
860.00
38.00
48.00
57.00
67.00
15.00
15.00
240.00
910.00
76.00
59.00
215.00
860.00
255.00
965.00
635.00
910.00
46.00
35.84
525.00
28.00
4.50
72.00
2.12
2.12
2.12

Rate
 8364.20

8180.85

7945.65

7752.70

10185.05

10001.70

10719.30

10536.00
 9801.75

9618.45

11291.20

11107.85

10409.40

10226.05

7852.70

7669.40
9297.70

9114.35

307.95

669.55

766.55

766.55

608.35

804.25
657.75
652.80
1826.25
575.25
669.55
246.40

1100.40

20%

307.95

181.90
772.10
 769.30

827.15
814.95

853.75

699.45

135.75
149.10
161.15
174.55

319.25

9673.50

9491.20

13581.85
13398.50

15777.40

15594.10

12321.25

12137.95
18644.60

18461.30

10817.10

10633.80

1580.90
1430.30
1291.45

14191.95
14008.65

8874.65

8691.35

448.80

88.95
87.50
89.65
89.65
94.10
89.65

88.95
87.50
89.65
89.65
94.10
89.65

83.15
 83.15

253.05

133.90

729.40
63877.35

22400.50
567.25

203.65
273.95

515.80
685.10

200.50
269.75

64.70

905.50
 385.25

7997.30

8599.35

8740.90

8882.45

9024.05

10080.15

10221.70

10363.30

10504.85

10646.45
 r reinforced cement concrete
oncrete aggregate (RCA) as

accelerate / retard setting of

te to site of laying, curing,
r direction of the engineer-in-

e separately. In case the

ctor shall have discretion to

688.45

27763.65
ment : 2 Fine sand), making
g etc, form work in precasting,

57.50

102.55
143.00
204.95
239.85
288.80

747.25
1053.40
oor treatments. The cover plate
g requirements and secured to
t freely rotates / moves in all
d slide inside the corresponding
ding vertical displacement.
datory requirement all as per the
ASTM 6063).

5800.15
7092.60
9074.10

4835.50
5438.90
6272.45
damage or deterioration from the
m maintenance personnel.
ndatory requirement. (Material

5424.20
6032.95
7198.30

727.15
1383.20
3141.40
 7734.60
8807.25

676.50

or achieving 150-
600 mm, in
de walls as
water and / or
al of earth/ rock /
he trench as and
xing stop ends or
uding chipping off
concrete, dressing
ng filling the
uding providing
e specifications
 Rate

700.00

4500.00

714.00

714.00

784.00

645.00

645.00

784.00

714.00

749.00

70.00

14.00

4850.00

4850.00

5200.00

260.00

4120.00

80.87

4600.00

5200.00

437.15

187.35

145.72

262.29

163.93
 145.72

4590.00

4500.00

5000.00
Rate

3950.00

5050.00

3800.00

4200.00

4800.00

4700.00

4600.00

2650.00

480.00

25.50

2.12

Rate

6882.00
6658.25

5746.80
5549.95

8030.60
 7814.65

8512.10
8288.35

142.00

193.80

273.45

819.15

13378.10

16714.70

575.25

862.90
837.85

1043.10
1018.05

12.60
 86.45

10321.40
9963.45

9963.45

11659.70

16791.90

20135.45

841.85

645.95
905.50

385.25

6849.50
8565.95
5588.65
7218.75

6500.85
8131.00

6769.65
8339.65

6439.20
8069.30

6240.25
7870.35

8414.65
8190.90

7873.20
7676.30

8589.95
 8393.05

6528.70

11763.25

8890.80

870.10

149.30

55.80

994.75
969.65

6994.15
 Rate

700.00

714.00

714.00

784.00

714.00

714.00

645.00

645.00

784.00

784.00

714.00

714.00

784.00

714.00

5000.00

80.00

10.00

4850.00

4950.00

5200.00

5000.00

1100.00

80.00

205.00

800.00
 230.00

250.00

220.00

250.00
Rate

260.00

2.00

4120.00

10.00

187.35

192.86

145.72

145.72

690.00

60.00

290.00

450.00

476.00

560.00

115.00

2.12

2.12

Rate
6653.45

8275.70

787.05
2160.20

888.30

7914.50

7380.35

9508.65

8974.50

873.05
2450.90

962.90
 50995.00
73288.00

69930.00

92223.00

57116.00
79409.00

76051.00
98344.00

89552.00
111845.00

135354.00
157648.00

48225.00
70518.00
64389.00
86682.00

1726.00

2544.00

1770.00

575.25

72673.00
94967.00

3319.00
9403.00
249.95

2544.00

48.55

2297.90

2334.65
 1448.05
1480.15

1703.00

5362.25

72090.35
94383.70

12241.70
12271.15
905.50

385.25

2675.70

2346.55
 Rate

300.00

250.00
714.00
714.00
784.00
645.00
645.00
784.00
784.00
714.00
784.00
714.00
714.00
5000.00
11200.00
70.00
5200.00
1000.00

3209.00

145.72

145.72

690.00
400.00
60.00

1500.00
1800.00

1800.00

1900.00

Rate

1000.00

2000.00

1200.00

2100.00

315.00
290.00
8.00
10.00
24.00

538.00

650.00

2.12
2.12

Rate

4827.40
4998.10
2906.45
2639.45

4679.35
4425.35

3555.45
3301.45

244.90
418.85

475.55

808.15

417.60

639.05
624.95

30.75
 33.80
52.85

2707.80
3105.50

3061.20
3542.85

ural drawings, and as directed by

cking filled with a grout of

mortar 1:2 (1 white cement : 2
nd the sides by means of cramps

4824.75
4676.05
4527.65
4378.65
4229.85

6651.90
6503.15
6354.75
6205.80
6057.00

6385.60
6013.95
5643.15
5269.75
4898.65

8212.75
7841.10
7470.30
7096.90

6725.80

2757.45

2639.45

624.95

37.60

2607.45
3122.30
140.85

2459.70
2577.70

220.00

365.65

35.50
 19.30
20.75
24.75
26.10

6187.90
4106.45
3330.20
2220.05

1216.35
1304.65
1731.45

163814.10

1645.80

1549.45

1723.05
2149.85

1063.45
 in pan shape in
sting of 3mm thick
m composite panel
coating of
stainless steel

s and serrated
e in SS 316, Nylon
d drawing The
es of the individual
th aluminium
cladding till the
elevant aluminium
e performance
ed, as per the
ment, only the
g width of
 Rate

714.00

714.00
784.00
714.00
784.00
714.00
645.00
784.00
714.00
784.00
714.00
784.00
714.00
749.00

534.00

773.00

220.00

215.00

400.00

288.00

230.00

155.00

500.00
775.00
625.00
380.00
 155.00
1309.00
997.00

838.00

2610.00

2300.00
2090.00
1870.00
257.00
205.00
154.00
103.00
144.00
133.00
103.00
185.00
175.00

400.00

310.00
45.00

126.00

100.00

95.00

740.00
670.00
575.00
610.00
36.00
220.00
170.00
140.00
100.00
95.00
255.00
455.00
640.00
160.00
140.00
125.00

470.00

90.00

140.00

120.00

100.00

500.00
80.00
300.00
290.00
240.00
180.00
160.00
185.00
260.00
340.00

135.00

80.00

56.00

49.00

39.00

75.00
60.00
45.00
40.00
35.00

5.00

125.00
90.00
65.00
 55.00

335.00
300.00
235.00
200.00
140.00
120.00
100.00
160.00
140.00
120.00
40.00
90.00
80.00
49.00
39.00
43.00
34.00
29.00
20.00
20.00
15.00
12.00
128.00
108.00
79.00
76.00
62.00
49.00
36.00
32.00
560.00
393.00
393.00
270.00
324.00
275.00
226.00

196.00
147.00
 128.00
580.00
481.00
383.00
304.00
226.00
324.00
275.00
231.00
142.00

1800.00

1600.00

1400.00

1000.00

900.00

890.00

300.00

130.00

135.00

265.00

70.00

320.00
75.00

165.00

5.00
4750.00

4850.00

280.00
430.00

38.00

776.00
791.00
600.00
650.00
32.00
150.00
150.00
187.35
145.72
178.19
262.29

309.00

515.00

306.00
510.00

775.00

62.00

57.00
88.00
93.00
108.00
77.00

686.00

20.00

48.00

33.00

357.00
63.00
73.00
99.00
125.00
884.00
 905.00

1010.00

469.00

609.00

877.00

439.00

582.00
21.00

650.00

455.60

1500.00

1450.00

772.00
402.00

25500.00
250.00
400.00

70.00

75.00

100.00

90.00

15.00
 195.00

215.00

140.00

90.00
12.50
58.00
70.00
8.00

250.00

420.00

76.00
72.00
7.00
8.00
48.00
42.00
54.00
22.00
12.00

430.00

40.00
560.00

35.00

30.00

25.00

1620.00
1720.00

1910.00

1620.00

1620.00

1430.00

700.00

57.00

435.00
28.00

900.00

305.00

10.00

10.00

13.00

14.00

14.00

240.00
 60.00

70.00
10.00
15.00
14.00
11.00
800.00
210.00
345.00

480.00

500.00

560.00

850.00

40.00

52.00

20.00
20.00
29.00
36.00
35.00
58.00

22.00
260.00
350.00
625.00
930.00
1085.93

1248.82

1547.45

1547.45

155.80

130.00

260.00

298.74

10.00

1200.00

6000.00

130.00
450.00
455.00

2635.00

1535.00

1265.00

280.00

311.00

100.00

351.00

396.00

469.00

568.00
135.00

66.00

85.00

314.00

424.00

418.00

583.00

291.00

357.00

358.00

88.00

98.00

98.00

385.00

300.00
250.00
230.00
150.00
310.00
280.00
180.00
150.00

375.00

275.00

230.00

230.00
 180.00
110.00
90.00
1000.00
1550.00
535.00
260.00
35.84

47.04

270.00
420.00
240.00

11.00

166.00

1700.00

480.00

2326.00

2100.00
315.00
2050.00

2000.00

3000.00
28.00

20.00
432.00

30.00

38.00

23.00

2.60
76.00
720.00
 867.00
380.00
294.00

2675.00

265.00

2295.00

2707.00

413.00

1062.00

4702.00

304.00
21500.00

303.00
70.00
5200.00

364.00

2479.00

413.00

2703.00

133.00

130.00

114.00

60.00
 105.00

110.00

212.00

237.00

260.00

361.00

365.00

22500.00
37.00
20.00
279.00
62.00
17.00
15.00
2.12
2.12
2.12

Rate

131576.95
106720.85
 74199.70

115052.20

97078.35
64332.20

13157.80
10672.20
7420.30

3704.45
3360.70

2511.95
2333.50

3259.05
2976.40

2682.05
2815.85

3070.05

2998.30
2039.80

2366.35

2400.40

2570.70

1399.80

1711.15

1743.60

1727.40
 1897.10

2231.20

1521.60

4458.40
4065.50

3100.55
2896.60

3951.85
3628.80

2682.05
doors, windows
all be measured)

148.50

48.15
 147.15

202.55

3918.85

4061.20

3751.10

3791.20

667.10
869.10

1089.30
1501.00
3086.10

2818.50

2512.35

2015.75

1881.95

1830.00

408.05

401.40

173.95
180.60

354.55

93.65
4342.30

3140.15

3893.35

4489.45

3287.30

4040.55

3863.65

2834.60

3479.40

4010.85

2981.75

3626.55
2682.05
2427.85

191.55
239.20

157.85
183.05

2622.20

511.55

626.55

33.20
107.05
61.50

274.90
 375.25
482.30

152.65
159.35

181.00
197.70

1277.65

1484.70

1164.90
812.40

161.90

194.35

95406.90
62238.25

48.00
39.05
32.75
16.35
60.70
52.40
40.00
21.80

47.05
40.60
34.30
16.95

77.70
73.00

64.30
56.90

251.70
224.95
196.70

278.45
251.70
223.45

282.95
282.95
299.00
74.65
61.05
53.05
39.10

35.20
28.25
24.25

29.15
26.00
22.10

59.25
51.90
45.20
less steel screws etc. complete :

228.90
157.45
175.70
125.90
147.45

86.15
34.75

394.95
353.45
325.35
288.95

374.35
300.55
232.30
160.30

273.20
259.80

723.80
 603.40

264.90
306.40
313.05
333.15

63.65

205.10
189.85
149.70

109.60

1025.65

856.30

76.30

186.80
 149.90
143.20

118.60
107.45
94.75

817.50

857.60

272.95
286.30
321.10
355.90

122.50

226.50
199.20
179.15

140.80

207.70
180.95
154.15

th necessary screws etc.

138.55
116.20
 106.85
97.60
90.40
79.05
72.45
68.45

260.30
234.90

with necessary screws etc.

117.65
104.40
90.80
75.55
58.65

89.90

212.85
60.05
53.25
46.30

35.50
62.25

64.55

739.80

139.70
1797.65

1530.05

1877.90

1744.10

1730.75

35.40
35.40

64.05

76.50

58.85
92.75

34.45

600.15
 310.40

85.60

721.75

44.85
34.15

355.05

17.65

232.55
280.70
 with inbuilt edging on both sides.
ackets of size 75x220 mm
ed by inserting galvanised M.S.
ection, a uPVC hollow section of
of plastic/galvanised M.S. 'U'
than 620 mm, having over all
e bar at two places by inserting
e as per manufacturer's

and rails of a uPVC hollow

lding edging on one side. The
ts of size 75x220 mm having
nserting galvanised M.S. tube of
a uPVC hollow section of size

2008.55
2612.20

408.25

2455.10
2455.10

702.60

3496.75

3963.70

481.85
3060.60
3194.40

1293.05

2100.40
2338.75

890.55
764.00

4901.50
 1982.70

1668.30

1567.95

1559.05

530.30

strength 225 kg/ sq.cm, Bending

3.50

1209.10

1201.70
windows and clerestory

4484.65

3282.50

4035.75

4631.80

3429.70

4213.45

4006.05

2976.95

3621.75

4153.20
3124.15

3768.90

1404.25
1051.75

1462.75

6444.95
35982.00

7145.90

1084.60

462.25

3467.20
4018.40
 545.60

3654.45

611.20

3954.15
10443.75

9635.40

7776.70

10746.90
8135.75

7249.90
crews, etc. Profile of frame &
fusion welded including drilling
n frame and adjacent finished
f approved quality, all complete
and silicon sealent shall be paid
yment on this account shall be

10284.70

10451.95

nd sash extruded profiles duly

quired length (shape & size
ded interlocks, EPDM gasket,
ers (weight bearing capacity to
screws etc. Profile of frame &
s and drainage of water etc.
ilicon sealent over backer rod of
-Charge. (Single / double glass
side shall be accepted but no

7634.10
 10030.30

7821.15

9183.30

and sash extruded profiles duly

quired length (shape & size
terlocks and uPVC extruded
one side of extreme panel along
wder coated) touch lock with
on rollers (weight bearing
tainless steel screws etc. Profile
g hardware's and drainage of
her proof silicon sealent over

all be made.
 7798.30

6783.70

nforced with 1.60 ± 0.2 mm thick

ng to uPVC profile), appropriate
aptor (if required), EPDM gasket,
zinc plated mild steel multi point
quired), stainless steel (SS 304
100 x 8 mm size for fixing frame
nd fusion welded at all corners,
ween frame and adjacent
pproved quality, all complete as
silicon sealent shall be paid
s account shall be made.

46 x 82 mm both having wall

ension. (Area of door above 2.00

6140.90

6940.45
 8766.85

rection of Engineer-in-charge.

311.80
345.25
376.00
511.15
516.50

188.55

167.15

94.90

155.10

161.80

133.35

1693.30
 921.35

1120.55

1260.70

1679.45

1065.15
1275.60
1709.75

1890.90

1834.45
2268.60
1791.05

9736.05

1791.05
39995.80

100.45
75.70
48.95

1215.75

902.55

2563.75

2339.60
153.15

226.75

749.70

423.70

38.45
 Rate

714.00
714.00
784.00
714.00
714.00
645.00
784.00
714.00
784.00
714.00
714.00

80.00

48.00
1400.00
800.00
300.00
260.00

800.00

800.00

4850.00
4750.00
4950.00
4850.00
4950.00
5400.00

54.00

4850.00
32.00
5100.00
5200.00
5300.00
37.00
27.00

2.00
2.00
6100.00
120.00
290.00
145.72
145.72

309.00

515.00

270.00

312.00

380.00

468.00

598.00
230.00
120.00
200.00
220.00
250.00
60.00
70.00
 50.00

55.00

35.00

250.00

1300.00
1375.00
450.00
560.00
500.00

413.00

2.12
2.12
2.12

Rate

93.05

78.20

9397.35

5374.35

4781.15
 4615.15

3008.80
2868.30
2718.90
424.20

1108.70
1108.70

668.95

t glass panes with glazing clips

lass panes cut to size and

C.C. 1:3:6 (1 Cement : 3 coarse

34.40
175.65

109.15

45.95

114.65

109.35

444.50

433.15

471.25

459.90

511.40

500.05

146.55
133.60

154.90
168.95
140.85

185.95

185.20

88.50

140.15
237.85

3.40

102.25

142.30

157.15
150.40
180.20

111.70
 117.30
144.60
156.35
191.95

612.25

732.20

971.55

940.30
1243.50

103.70
 Rate

800.00

300.00
714.00
714.00
714.00
784.00
645.00
645.00
784.00
714.00
784.00
784.00
784.00
714.00
1400.00
1350.00
1350.00
1400.00

34790.00

5000.00
11200.00
76.00
1130.00
189.00
250.00
70.00

60.00

56.00
1500.00
900.00
4950.00
4850.00
20.00
230.00

250.00
320.00
880.00
791.00
500.00
285.00
265.00
245.00
2.00
275.00
300.00
260.00
150.00

3209.00

84.00
2049.00
8.70
13.00
18.00
437.15
163.93
163.93
187.35
145.72
145.72
163.93
145.72
163.93
163.93
113.00

4590.00

510.00
145.00
 160.00

740.00
145.00
210.00
70.00
3.00
690.00
400.00
460.00
525.00
550.00
750.00
700.00
500.00
700.00
650.00
880.00
1200.00
480.00
700.00
650.00
880.00
1400.00

1450.00

685.00
620.00
1000.00
7800.00
22.00

370.00

550.00
500.00

225.00

335.00

36.00
 10.00

190.00

175.00

300.00

340.00

400.00
950.00

500.00

560.00

900.00

1390.00

16.00
380.00
9.00
2.12
2.12
2.12

Rate

937.00
898.20
 733.30

545.00

855.90

928.65

570.75

7958.65

69.30
 3:1 (3 cement : 1 marble
volume, including cement slurry

917.50
947.30

929.00

925.75
913.70
889.85

946.90
989.45

963.30

955.35
941.50
907.45

979.90
1039.50
 1002.90

992.25
972.30
925.05

op layer 6 mm thick with white,

n cement marble powder mix
ble chips) by volume :

1563.70
1593.50

1575.20

1569.65
1559.90
1536.05

79.50

80.45

1461.65
1309.90

1259.95

1218.65
1163.20

102.10

2027.75

1968.45

1920.30
1850.45

1295.20

1312.10

1240.75
1185.30

1233.05

1160.00

983.95
928.50
1298.80

3377.45
1992.70
2608.15
2685.05
2100.40
2200.40
593.30

701.50

1706.60

2038.55

988.35
1017.80
 1193.30
1222.75

1292.00
1321.45

157.35

36.35

4187.95
2800.10

10543.40

142.85

935.60
 938.50

1107.05

1142.80

1225.10

1334.35
1416.65
1879.95
2551.95
1286.60
1372.80
1407.05
1702.05
1633.45

1359.20
1612.75
1544.20
1859.60
2298.45

1311.05
1612.75
1544.20
1859.60
2572.75

735.30

633.60

815.45

1613.00
1384.20
1466.50
1932.75
2604.75

169.40

1593.85
1676.15
2142.40
2814.40

312.15
258.65
205.15
146.60

1455.10
1537.40
2003.65
2675.65

11.70

6095.50

6389.40

3282.50
5094.10
5407.15
2589.90

3908.80
 Rate

300.00

714.00
714.00
784.00
714.00
784.00
714.00
645.00
645.00
784.00
714.00
784.00
784.00
714.00
714.00
784.00
714.00
714.00
749.00
 10.00

225.00

210.00

210.00

210.00

210.00

200.00

175.00

280.00

310.00

400.00

165.00

555.00

260.00

210.00

195.00

1400.00
1350.00
500.00
25614.00
29.00
235.00
210.00
320.00

288.00

5000.00
11200.00
440.00
 100.00
60.00
35.00
50.00
165.00
120.00
130.00
5.00
10.00

60.00

45.00

285.00
1500.00
5000.00
135.00
210.00
50.00
4850.00

280.00

38.00

120.00

9.00

10.00

20.00

6.00
260.00
280.00
791.00
300.00

409.00

21.00
30.00
35.00
21.00
32.00
35.00
 58.00
42.00
30.00
4600.00
163.93
163.93
187.35
145.72
262.29
145.72
163.93
145.72
145.72
145.72
145.72
45.00
45.00
6000.00

549.00

698.00

895.00

730.00

924.00

1182.00

520.00
 670.00

870.00

636.00

809.00

1038.00

846.00

1071.00

1370.00

680.00

872.00

564.00

544.00

584.00
487.00
538.00
725.00

500.00

60.00
120.00
140.00

46.00
22.00
38.00
12.00

4.00

3.00
24.00
21.00
90.00
12.50
58.00

70.00
380.00

250.00

50.00
350.00
26.00
12.00
120.00
140.00
27.00

70.00

130.00

8.00

11.00

18.00
39.00
18.00
32.00
46.00
81.00
59.00
92.00
35.00
 59.00
27.00
47.00
15.00
14.00
90.00
130.00
215.00
8000.00

105.00

100.00
110.00
490.00
95.00
10.00
45.00

4600.00

685.00

140.00

90.00

45.00

22.00

4.50
1.00

710.00

800.00

625.00

735.00

880.00

380.00
220.00
110.00
130.00
5.00
12.00
10.00
10.00
130.00
80.00
40.00

20.00
10.00
6.00
5.00
10.00
450.00
525.00
8.00
8.00
375.00

225.00

235.20

440.00
240.00
230.00
235.00
270.00
850.00
2.12
2.12
2.12

Rate
1320.35
1135.45
978.00

95.60
76.50
76.50

552.85
441.60
441.60

822.15
750.85

1370.40

700.20

811.85
752.45
462.10

76.50

211.25
163.65

444.75
444.75
498.60
443.75

364.40
296.25
493.55
535.95
631.20
262.40
878.55
476.70
h a coat of coarse sand at 60
tly soaked in kerosene oil

d and plastered with 25 mm

cow dung) and covered with flat
oofing compound by weight of

d and plastered with 25 mm thick

) and covered with machine
water proofing compound by

ation 12.5,

0.35
nt : 3 fine sand) mixed with 2% of
ent : 3 fine sand) and finished

of approved size) on roofs

pound, laid over a bed of 20 mm
gregate 10 mm and down

0.20

266.60

907.95

937.35

774.15

810.90

936.00

888.20

773.40

751.30

635.00

402.55
 407.15

422.70

388.70
402.50

373.00

1421.25
1708.05

485.75

218.90

597.85

242.80

276.85
306.30

142.10

308.45
328.55
444.05
604.65

431.10

213.00
319.75

79.80
119.95

79.80
110.60

141.55
205.45

124.20
190.75

91.80
132.00

81.10
115.95

310.85
 309.50

47.90

1145.95

1286.45

1300.50

1483.15

72.00
 1179.25

1048.50

346.65

77.75

671.55

450.60
412.85

465.25
384.20
422.50
1110.60
1591.70

1746.25

1948.95
1247.50

1718.70
1871.80

1998.25

1444.90

1363.95
 307.35

1851.50
450mm c/c, shall be fixed in a
mm dia x 230mm long G.I wire at
s of 20mm and 30mm long, the
ith 25mm long dry wall screws
er channels with the help of dry
of tapered and square edges of
compounds in three layers
all as per manufacture's
, cut outs made with frame of
of the Engineer in charge but

1330.40

568.45

272.25

277.90
 309.55

mensions as per IS code 2676

uss members in slope or required
h 3 mm EPDM seal washer etc.
n-Charge. (Cost of truss/frame

928.95

1158.80

1452.20

1201.20

1488.90

1871.50

916.85

1147.10
 1454.10

mensions as per IS code 2676

Hex cap headed self

all inclusive of labour,
Cost of truss/frame work shall

1058.60

1316.35

1657.55

1373.25

1706.90

2150.30

1126.00

1410.45
04 (ISO designation)] For color,
rons, using self drilling/ tapping

885.50

971.55

748.20

829.05

1616.00