PUBLIC ADDRESS SYSTEM

OPERATION MANUAL

MPA-240D
MIXER AMPLIFIER

POWER
MIC1 INPUT MIC 1 MIC 2 MIC 3 MIC 4/AUX 1 AUX 2 BASS TREBLE MASTER
PROT

100V CLIP
MPA-240D IR ON
0 10 0 10 0 10 0 10 0 10 0 10 4-16 Ω SIG
USB TF OFF

Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.

1
 TABLE OF CONTENTS

1. SAFETY PRECAUTIONS .......................................................................................3

2. GENERAL DESCRIPTION ....................................................................................5

3. FEATURES ...............................................................................................................5

4. NOMENCLATURE AND FUNCTIONS

4.1 Front Panel ..............................................................................................................6

4.2 R emote control......................................................................................................... 6

4.3 Rear Panel............................................................................................................... 7

5. OPERATION ILLUSTRATION ................................................................................8

6. TROUBLESHOOTING ............................................................................................10

7. APPLICATIONS ..................................................................................................... 11

8.BLOCK DIAGRAM .................................................................................................12

9.SPECIFICATIONS ................................................................................................. 13

10.DIMENSIONAL DIAGRAM ................................................................................. 14

2
 1. SAFETY PRECAUTIONS

Be sure to read the instructions in this section carefully before use.

Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
We also recommend you keep this instruction manual handy for future reference.

Safety Symbol and Message Conventions

Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety

Indicates a potentially hazardous situation which, if mishandled, could

result in death or serious personal injury.

Indicates a potentially hazardous situation which, if mishandled, could

result in moderate or minor personal injury, and/or property damage.

When Installing the Unit When the Unit is in Use

Do not expose the unit to rain or an environment Should the following irregularity be found during
where it may be splashed by water or other liquids, use, immediately switch off the power, disconnect
as doing so may result in fire or electric shock. the power supply plug from the AC outlet and
contact your nearest dealer. Make no further
Use the unit only with the voltage specified on the attempt to operate the unit in this condition as this
unit. Using a voltage higher than that which is may cause fire or electric shock.
specified may result in fire or electric shock. If you detect smoke or a strange smell coming
from the unit.
Do not cut, kink, otherwise damage nor modify the If water or any metallic object gets into the unit
power supply cord. In addition, avoid using the If the unit falls, or the unit case breaks
power cord in close proximity to heaters, and never If the power supply cord is damaged (exposure of
place heavy objects -- including the unit itself -- on the core, disconnection, etc.)
the power cord, as doing so may result in fire or If it is malfunctioning (no tone sounds.)
electric shock.
To prevent a fire or electric shock, never open nor
Be sure to replace the unit's terminal cover after remove the unit case as there are high voltage
connection completion. Because high voltage is components inside the unit. Refer all servicing to
applied to the speaker terminals, never touch these your nearest dealer.
terminals to avoid electric shock.
Do not place cups, bowls, or other containers of
Be sure to ground to the safety ground (earth) liquid or metallic objects on top of the unit. If they
terminal to avoid electric shock. Never ground to a accidentally spill into the unit, this may cause a fire
gas pipe as a catastrophic disaster may result. or electric shock.

Avoid installing or mounting the unit in unstable Do not insert nor drop metallic objects or
locations, such as on a rickety table or a slanted flammable materials in the ventilation slots of the
surface. Doing so may result in the unit falling unit's cover, as this may result in fire or electric
down, causing personal injury and/or property shock.
damage.

3
 SAFETY PRECAUTIONS

When Installing the Unit When the Unit is in Use

Never plug in nor remove the power supply plug Do not place heavy objects on the unit as this may
with wet hands, as doing so may cause electric cause it to fall or break which may result in
shock. personal injury and/or property damage. In
addition, the object itself may fall off and cause
When unplugging the power supply cord, be sure injury and/or damage.
to grasp the power supply plug; never pull on the
cord itself. Operating the unit with a damaged Make sure that the volume control is set to
power supply cord may cause a fire or electric minimum position before power is switched on.
shock. Loud noise produced at high volume when power is
switched on can impair hearing.
When moving the unit, be sure to remove its power
supply cord from the wall outlet. Moving the unit Do not operate the unit for an extended period of
with the power cord connected to the outlet may time with the sound distorting. This is an indication
cause damage to the power cord, resulting in fire or of a malfunction, which in turn can cause heat to
electric shock. When removing the power cord, be generate and result in a fire.
sure to hold its plug to pull.
Contact your dealer as to the cleaning. If dust
Do not block the ventilation slots in the unit's cover. is allowed to accumulate in the unit over a long
Doing so may cause heat to build up inside the unit period of time, a fire or damage to the unit may
and result in fire. result.

Avoid installing the unit in humid or dusty locations, If dust accumulates on the power supply plug or in
in locations exposed to the direct sunlight, near the the wall AC outlet, a fire may result. Clean it
heaters, or in locations generating sooty smoke or periodically. In addition, insert the plug in the wall
steam as doing otherwise may result in fire or outlet securely.
electric shock.
Switch off the power, and unplug the power supply
plug from the AC outlet for safety purposes when
cleaning or leaving the unit unused for 10 days or
more. Doing otherwise may cause a fire or electric
shock.

An all-pole mains switch with a contact separation of at least 3 mm in each pole shall be incorporated in
the electrical installation of the building.

Due to product upgrades, while some of the features and specification in the user manual does not
match the actual functions, sorry for any inconvenience and thanks for your kind understanding!

4
 2. GENERAL DESCRIPTION

It’s a mixer amplifier built in Bluetooth and tuner, it adopts high-performance switching power supply
and class D technology, with 1U chassis design, high efficiency, light weight, beautiful appearance.

3. FEATURES

1. Adopt high-performance switching power supply and class D technology, with 1U chassis design,
high efficiency, light weight, beautiful appearance.
2. With function of MP3 module, can read MP3 files in USB flash disk, TF card. Configure MP3 remote
control; support power-off memory function, MIC recording function.
3. Support 1 channel EMC input, 2 channels AUX input, 4 channels MIC input.
4. Each input has independent volume adjustment, with treble, bass adjustment and volume control.
5. With level indication, overload and protection indicator; support short circuit, overload and overheat
protection function.
6. With mute function; microphone input priority is higher than line input; MIC1 input priority is higher
than other audio input; EMC input has the highest priority.
7. Channel priority function: EMC>MIC1>MIC2/MIC3/MIC4/AUX1/AUX2/MP3.
8. Adopt advanced and high-efficiency power amplifier circuit, the speaker output is 100V or 4 ohms;
rated output power is 60W, 120W, 240W, 350W, 500W.
9. Power supply is AC power , power consumption is 120W,180W, 300W, 500W, 650W.
10. Forced air-cooling from front to back, turning it on at a constant speed, and speeding up as the
temperature rises; it can meet long-term work.
11. 100V/4-16Ω output port/100V/4-16Ω speaker output switch.
12. With 24V power supply interface, DC 24V standby power supply (battery) function is optional.

5
 4. NOMENCLATURE AND FUNCTIONS

4.1 FRONT PANEL

21 20 19 18

/
POWER
MIC1 INPUT MIC 1 MIC 2 MIC 3 MIC 4/AUX 1 AUX 2 BASS TREBLE MASTER
PROT

100V CLIP
IR
/
ON
0 10 0 10 0 10 0 10 0 10 0 10 4-16 Ω SIG
USB TF OFF

12 345 6 7 8 9 10 11 12 13 14 15 16 17

1. Recording function button 12. BASS adjustment potentiometer

2. MP3 loop playback function button 13. TREBLE adjustment potentiometer
3. Play/Pause 14. Master volume control
4. Next song/Volume reduce 15. PROT/100V/4-16Ω/CLIP/SIG
5. USB interface status indicators
6. MIC1 unbalanced input jack 16. The power switch
7. MIC1 volume control knob 17. The power indicator
8. MIC2 volume control knob 18. TF card slot
9. MIC3 volume control knob 19. Previous song/Volume up
10. MIC4 / AUX1 volume control knob 20. LCD display
11. AUX2 volume control knob 21. Mode function button

4.2 Remote control

10 9
1. Power switch
1 STOP
8 2. Mode
2 MODE EQ
3. Previous/next
7
4. Volume increase/decrease
3 6
5. 0~9 number button
4 6. Play/pause
7. Sound effect control
5
8. Mute
9. Cycle play button
10. Pause

Normal usage distance of remote control:

Remote control distance: 8 meter, angle: level ±35, vertical±15.
Remote control usage attention:
1. When install battery, please mind electrode.
2. Please let remote control aim right with window of host machine.
3. When found remote distance get short and insensitive, please change battery.
4. Please take out battery when don't use it for a long time.
5. Take it easy in case of falling.

6
 4. NOMENCLATURE AND FUNCTIONS

4.3 REAR PANEL

34

IN OUTPUT OUTPUT INPUT

BATT SUPPLY FM ANT
DC24V 8A 100V/4-16Ω EMC IN MIC 4 MIC3 MIC 2 MUTE
+ G
100V 4-16Ω

AUDIO AUX2 AUX1

22 23 24 25 26 27 28 29 30 31 32 33

22. AC power input socket

23. 100V/4-16Ω output interface
24. 100V / 4-16Ω speaker output switch
25. Cooling fan
26. EMC input interface
27. Line output interface, used to connect the line input interface
28. 2 channel AUX input interface, used to connect AUX output interface
29. MIC4 input interface
30. MIC3 input interface
31. MIC2 input interface
32. MUTE mute control
33. FM radio antenna interface
34. 24V DC power interface

7
 5. OPERATION ILLUSTRATION

1.Connect the speakers:

①When the 100V and 4-16Ω selector switch ②When the 100V and 4-16Ω selector switch
to 100V position, as shown below: to 4-16Ω position, as shown below:
IN OUTPUT IN OUTPUT
BATT SUPPLY BATT SUPPLY
DC24V 8A 100V/4-16Ω DC24V 8A 100V/4-16Ω

100V 4-16Ω 100V 4-16Ω

SPK- SPK+ SPK- SPK+

Constant pressure speaker: According to the rated Fixed resistance speaker: 4-16Ω
power of the power amplifier, connect the constant
power speaker

Note:
1. Before connecting the speakers, please make sure that the equipment is powered off. In the
case of power on, may have the risk of electric shock.
2. Please make sure there are no applied load to the speaker cables.
3. During the installation of speakers, please make sure that the sum of the rated input power
of the speakers to be connected is less than rated power of equipment.

2.Connect external devices:

①Please ensure that the equipment and all equipment will be connected are powered off.
②Using the corresponding cable to connect this equipment and other external equipment.

3.Connect the power line and turn it on:

①Please make sure that the power switch of equipment and its connected equipment are
turned off (in the OFF position).
②Turn the volume knob to the left
③Connect the supplied power line to the AC IN interface
④Plug the power line into the applicable socket
⑤Turn on the connected equipment (CD player, etc.), and then turn on the equipment.

Note:
1.Before powering on, please check and make sure there is no problem with the cable and connection.
2.When you turn off the system, turn off the equipment, and then turn off the connected equipment.

8
 5. OPERATION ILLUSTRATION

4.Microphone using:
1.Turning the volume knob to the left,Connect the microphone and microphone input interface.
2.Turning the volume knob in the right position.
3.Facing the microphone and Speak loudly, turn the volume knob to the right, until the output signal
no longer distortion.If input is high but output is low voice, and then increase the volume by using
the volume knob.If the speaker volume is very high, then reduce the volume by using the volume
knob.

5.Shutdown the system:

1.Turning the volume knob to the left until the minimum position.
2.Turning off the panel power switch of the professional power amplifier, at 0ff.In turn shutoff
processor equipment and audio source equipment.

Note:
1. Turn off the power switch,Please wait about 5 seconds before turning on again.Continuous rapid
turning on and off the power switch, it will lead to equipment failure.
2. Even the switch is in the off status, there will be a little current in equipment. If it won’t use the
equipment in a long time, please unplug the power cord from the wall AC socket.

6.Built-in MP3 player operation method:

/
IR
USB TF

The buttons are explained as follows:

S.No Buttons Function

1
/ Mode function button; FM / USB / BT / playing (Long press this button to
forcibly turn on / off the machine)
/

2 Previous song (long press to increase volume)

3 Mp3 loop playback function button; (with Repeat One / Repeat ALL /
Random / Repeat Folder mode.)

4 Play / Pause (long press this button in FM mode to receive the station)

Recording function button; (press this button in PLAYING mode to record)

5 (Long press the Record button to switch between recording and USB playback)
/

6 Next song (long press to decrease volume)

USB function
Press the MODE button to select the USB mode, copy the MP3 file in the U disk (below 32G), and
it supports MP3 / WAV / WMA / AEC / FLAC format.

TF card function
Insert a TF card (below 32G) to copy the MP3 file, and it supports MP3 / WAV / WMA / AEC /
FLAC format.

9
 5. OPERATION ILLUSTRATION

FM (Radio reception) function

Press the MODE button to select the FM mode, and then long press the PLAY / PAUSE button to
automatically receive the radio station. The radio stations received (depending on the sound
received) depends on the venue.

Bluetooth function
Press the MODE button to select the Bluetooth mode, turn on the mobile phone Bluetooth for
connecting, it can play normally when the mobile phone is 10 meters barrier-free away.
Bluetooth default name is "BP10_BT".

MP3 song loop playback

In USB or TF card mode, play a song at will, press the mode button to switch between REPeat
One / REPeat ALL / Random / REpeat Floder.

Functional memory function

You can turn it off by the remote controller or long pressing the MODE button. After it is turned
on, it can remember the function mode selected before. If you unplug the power cable and turn
it on again, the default is Bluetooth function mode.

Volume +/-
Long press the Previous Song button to increase the volume quickly, and long press the Next
Song button to decrease the volume quickly.

6. TROUBLESHOOTING

Failure phenomena Failure cause

1 . Power line is cut off

1. Power switch is not opened 2. The protection function of the equipment is
not activated

1. The power switch is not opened or the power

plug is bad contacted.
2. The fuse is burnt
2. All lines are connected, but there is 3. The volume knob is not opened or turned down
no sound. to a extra low level
4. There is no audio signal input
5. There is short-circuit in the speaker line.

1. The equipment is in very high temperature to

3. The sound suddenly disappears in
make it into protection status.
normal status.
2. The connection wire is bad contact.

The equipment is set to be low impedance

4. Low sound connection, but the speakers connected is
with high impedance.

The input level of Mic or external equipment

5. Sound is distorted is too high

10
 Audio source equipment like CD/MP3 player

POWER

ON
OPEN PLAY STOP PREVIOUS NEXT
CLOSE OFF
7. APPLICATIONS

REAR PANEL CONNECTIONS

IN OUTPUT OUTPUT INPUT

BATT SUPPLY
DC24V 8A 100V/4-16Ω EMC IN MIC 4 MIC3 MIC 2 MUTE FM ANT
+ G
100V 4-16Ω

AUDIO AUX2 AUX1

11
AC power input
MIC STANDBY
ALARM MODE PLAY RECORD PLAY in
REC in
MSG
PLAY
SIREN
ON
VOL START STOP OFF
MIC
Alarm signal generator

Speaker
 MUTE_MIC1

LEVEL AUDIO OUT

ENC IN

LEVEL
MUTE_ALL

MIC1

LEVEL
BA SS TREBLE

Protection circuit
8. BLOCK DIAGRAM

LEVEL

MIC2 2-STAGE EQ
Amplifier Amplifier output
LEVEL Q1
MUTE_MIC1 module LED display

GND
Switchover between 4-16Ω and 100V
MIC3 Fun control

12
LEVEL

MIC4
DC 24V inverter switching
Q2
MUTE_ALL power supply power supply

AUX1 AUX2 GND

MP3/BT MODLE
 9. SPECIFICATIONS

Model MPA-60D MPA-120D MPA-240D MPA-350D MPA-500D

Rated Power 60W 120W 240W 350W 500W

Output Level 4-16Ω/100V

MIC1,2,3,4 Input:5mV/600Ω unbalanced 6.3 PHONE JACK
connection terminal; AUX1,2 Input: 350mV/10KΩ unbalanced
Input Sensitivity
RCA connection terminal; EMC input:775mV/10KΩ unbalanced
6.3 PHONE JACK connection terminals
Output Sensitivity& MIX OUT: 1000mV/470Ω
Impedance unbalanced RCA connection terminal
Bass:±10dB at 100Hz
Tones
Treble:±10dB at 10KHz

Frequency Response 80Hz~16KHz(+ 1dB,- 3dB)

Cross talk attenuation ≥50dB
SNR S/N Ratio MIC1、2、3: 66dB；AUX1、2:85dB
THD ≤0.05%(at 1KHz，1/3 rated power)
Indicator Power indicator
Cooling Mode Air cooling
Protection Mode Short circuit, overload and overheating protection
Operation Temperature +5℃~+40℃
Storage Temperature - 20℃~+ 70℃
Relative Humidity <95%(No condensation)
~110V 50Hz ~110V 60Hz
~120V 50Hz ~120V 60Hz
Voltage ~220V 50Hz ~220V 60Hz
~230V 50Hz ~230V 60Hz
~240V 50Hz ~240V 60Hz
Power Consumption 120W 180W 300W 500W 650W
Weight 4.3Kg 4.5Kg 5.1Kg 5.4Kg 5.6Kg

Dimension 484×295×44mm

13
 10. DIMENSIONAL DIAGRAM

UNIT:mm

484

/
POWER
MIC1 INPUT MIC 1 MIC 2 MIC 3 MIC 4/AUX 1 AUX 2 BASS TREBLE MASTER
PROT

44
48
100V CLIP
IR
/
ON
0 10 0 10 0 10 0 10 0 10 0 10 4-16 Ω SIG
USB TF OFF

436
IN OUTPUT OUTPUT INPUT
BATT SUPPLY

44
MUTE FM ANT
DC24V 8A 100V/4-16Ω EMC IN MIC 4 MIC3 MIC 2
+ G
100V 4-16Ω

AUDIO AUX2 AUX1

315
44

UNIT:mm

Over 100

/
POWER
MIC1 INPUT MIC 1 MIC 2 MIC 3 MIC 4/AUX 1 AUX 2 BASS TREBLE MASTER
PROT

100V CLIP
IR
/
ON
0 10 0 10 0 10 0 10 0 10 0 10 4-16 Ω SIG
USB TF OFF

Over 100 Over 100

14
PUBLIC ADDRESS SYSTEM

15 Version 0.5