Itfreedumps provides the latest online questions for all IT certifications,

such as IBM, Microsoft, CompTIA, Huawei, and so on.

Hot exams are available below.

AZ-204 Developing Solutions for Microsoft Azure

820-605 Cisco Customer Success Manager

MS-203 Microsoft 365 Messaging

HPE2-T37 Using HPE OneView

300-415 Implementing Cisco SD-WAN Solutions (ENSDWI)

DP-203 Data Engineering on Microsoft Azure

500-220 Engineering Cisco Meraki Solutions v1.0

NACE-CIP1-001 Coating Inspector Level 1

NACE-CIP2-001 Coating Inspector Level 2

200-301 Implementing and Administering Cisco Solutions

Share some 300-820 exam online questions below.

1.An employee has recently left an organization and a manager suspects that this employee may
have made changes to the system that no one is aware of. Mobile and Remote Access registration is
not working. Internal communications appear to be working, but no external system is able to register
or call anywhere. While investigating this problem, it is discovered that no internal systems are able to
call externally either.
What is the TraversalZone missing that is causing this issue?
A. SIP trunk to the DefaultZone
B. route pattern to the DefaultZone
C. link to the DefaultZone
D. pipe to the DefaultZone
Answer: C

2.A Cisco Webex Hybrid Video Mesh Node can be installed in the DMZ and on the internal network.
Which statement is true?
A. Webex Cloud supports either a DMZ-based Mesh Node for security or an internal-based Mesh
Node for media control only.
B. Installing a Video Mesh Node in the DMZ requires you to open TCP and UDP port 4444 in your
internal firewall for full clustering functionality.
C. Installing a Video Mesh Node in the DMZ requires the external firewall to allow UDP traffic from
ANY port to the address of the Video Mesh Nodes via port 5004.
D. Using internal Video Mesh Node also works due to Mobile and Remote Access setup for Webex
Teams clients. A DMZ node is added for extra security.
Answer: C

3.What is the name of the Webex core service that delivers group messaging, one-to-one messaging,
presence, and file sharing?
A. Cisco Webex Messaging
B. Cisco Webex App
C. Cisco Webex ONE
D. Cisco Jabber Online
Answer: B

4.Refer to the exhibit.

When Expressway-E routes a call with URI [email protected] to a DNS zone, which DNS server does
the Expressway query for the SIP SRV records?
A. 10.20.20.20
B. 10.10.10.10
C. 10.40.40.40
D. 10.30.30.30
Answer: A

5.For a Mobile and Remote Access deployment, which server's certificate must include the Unified
registration domain as a Subject Alternate Name?
A. Expressway-C server certificate
B. Cisco Unified Communications Manager server certificate
C. Expressway-E server certificate
D. Expressway-C and Expressway-E server certificate
Answer: C

6.An engineer is investigating failing incoming calls that are expected to connect. The engineer
notices that the failed calls all have a port number of 5060 at the end of the URI. The search rules are
configured in a way that they do not expect a port to be included.
Which configuration allows the routing of this call?
A. * transform with a pattern string of *(.*)@example.com(:5060)?"
* replace a string of \[email protected]
B. * search rule with a pattern string of “(.*)@example.com(:5060)?"
* replace a string of \1\2@example com
C. search rule with a pattern string of “(.*)@example.com(:5060)?"
* replace a string of \[email protected]\2
D. * transform with a pattern string of “(.*)@example.com(:5060)?"
* replace a string of \[email protected]\2
Answer: A

7.What allows endpoints behind a NAT to discover the paths through which they will pass media?
A. RTP
B. TLS
C. SNMP
D. ICE
Answer: D
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/PA/ICE/icepa125.html

8.Which option changes the addresses and ports in voice and video signaling messages?
A. Firewall ALG
B. NAT overload
C. NAT Pinhole
D. NAT ALG
Answer: D

9.Where can the administrator manage a Webex tenant?

A. Cisco Webex administrator portal
B. Cisco Webex management portal
C. Cisco Webex control panel
D. Cisco Webex Control Hub
Answer: D

10.Which interworking option must be used on the Expressway for it to act as a SIP/H.323 gateway
when no endpoint is registered?
A. enabled
B. registered only
C. off
D. on
Answer: D

11.Which statement about scheduling Expressway backups is true?

A. It is not supported on the application.
B. It is allowed from the application CLI of the Expressway only.
C. It is allowed from the application CLI and GUI of the Expressway.
D. It is allowed from the application GUI of the Expressway only.
Answer: A

12.Refer to the exhibit.

A collaboration engineer is configuring Cisco Expressway for B2B calling. The engineer must allow
inbound calls to be routed to Cisco UCM. The traffic must be unencrypted between the Expressway-C
and the Cisco UCM cluster.
Which configuration correctly implements the zone?
A)
B)
C)
D)
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C

13.Which step is required when configuring cloud and hybrid deployments for Cisco Jabber?
A. Add the Jabber user to Cisco Unity Connection.
B. Add the Jabber user to Expressway-E.
C. Add the Jabber user to Expressway-C.
D. Add Jabber Users to the Cisco Webex Administration Tool.
Answer: D
14.Refer to the exhibit.

An engineer must configure a B2B traversal zone. Trusted certification authority and server
certificates are uploaded to Cisco Expressway-C and Expressway-E servers. After the traversal zone
configuration is completed in Expressway-C, the error message in the exhibit appears.
What are the two reasons for the error? (Choose two.)
A. The peer 1 address in Expressway-C must be replaced by the FQDN of Expressway-C.
B. The peer 1 address in Expressway-C is not the FADN of Expressway-E.
C. The communication port is not set to 7001.
D. The FQDN of Expressway-E cannot be resolved by the DNS server.
E. The traversal zone TLS verify subject name in Expressway-E does not match the FQDN of
Expressway-C.
Answer: A, B

15.A video device registered with Cisco UCM failed to make an outbound B2B call. From Expressway-
C diagnostic logs, an engineer found that the destination pattern is “[email protected]:5061”, and
the call was dropped with a 404 response code from Expressway-C. The search rule intended for this
call-in Expressway-C is configured for Alias Pattern Match, Pattern type “Suffix,” and Pattern
“example.com”.
How must the configuration be changed to allow the call?
A. Update the route pattern in Cisco UCM to send calls to "example.com" to the correct port.
B. Create a transform on Expressway-C to strip port numbers.
C. Create a call policy rule on Expressway-E to allow calls to port 5061.
D. Update the call policy list in Expressway-C to allow calls to "example.com".
Answer: B

16.Refer to the exhibit.

The web server is set up to store contact photos and the Cisco Jabber-config.xml file is updated for all
clients. After these changes, Jabber for Windows users cannot view the contact photos when they are
connected via Mobile and Remote Access.
Which action resolves the issue?
A. Update the “PhotoUriWithToken’ entry to “Https”.
B. Update the contact photos to “png”.
C. Add the web-server address within the HTTP server allow list on the Expressway-C.
D. Add the web-server address within the HTTP server allow list on the Expressway-E.
Answer: D

17.Refer to the exhibit.

When configuring a search rule that routes calls to a zone, what occurs when 13358 is dialed?
A. 13358 is replaced by 135, and then is sent to the local zone.
B. 13358 is replaced by 135 and remains in the same zone.
C. 13358 is replaced by 135, and then is sent to the traversal zone.
D. 13358 is sent directly to the traversal zone.
Answer: C

18.DRAG DROP
Drag and drop the services from the left onto their descriptions on the right. Some services are used
more than once.
Answer:

19.Which protocol and port are used for signaling between on-premises Cisco Webex Video Mesh
Nodes and Cloud Media Services?
A. standard SIP over TCP port 5060
B. signaling over HTTPS TCP port 443
C. standard SIPTLS over TCP port 5061
D. signaling over TCP port 444
Answer: D

20.Refer to the exhibit.

When users sign in to Cisco Jabber through Mobile and Remote Access, they cannot see their own
photo or the photo of their contacts next to each name.
Which action must be taken in Cisco Expressway-C to resolve the issue?
A. Add an HTTP allow list for the Instant Message and Presence server.
B. Add an allow call policy rule from the Cisco UCM traversal zone.
C. Upload the missing Instant Messaging and Presence server certificate to fix the connection to its
server.
D. Add an HTTP allow list for the web server that contains the photos.
Answer: D

21.What is the purpose of Webex Cloud-Connected UC?

A. It is a Cisco UCM deployed in the Webex cloud for feature parity when moving to cloud.
B. It is a hybrid calling setup with an on-premises Cisco UCM and a Webex based Cisco UCM to
benefit from both critical on-prem and flexible cloud deployments.
C. Get the benefits of centralized cloud-based analytics and troubleshooting while keeping critical
calling on-premises.
D. It is a migration path tor moving from on-premises UC to Webex in a step by step plan.
Answer: C

22.What is the benefit of configuring ICE, TURN and STUN in a Cisco Unified Collaboration
environment?
A. The ICE protocol enables the use of MRA for Cisco endpoints to register behind the firewall.
B. The endpoints use fewer ports to minimize the port range and allows for multiple connections in a
high-density deployment.
C. It can traverse firewalls without opening incoming ports.
D. The endpoints discover paths to optimize media flow and allows for peer-to-peer media traffic in
some cases.
Answer: D

23.Which type of interface is required when the Cisco Expressway-E is located in a DMZ between two
separate firewalls on separate network segments?
A. dual network interface
B. application programming interface
C. command line interface
D. single network interface
Answer: A

24.During the deployment of a Cisco Webex Video Mesh, where do on-premises SIP endpoints send
signaling?
A. On-premises endpoints cannot participate in Cisco Webex Video Mesh
B. to the cloud
C. to the switching services
D. to the call control environment (Unified CM or Expressway)
Answer: D

25.Refer to the exhibit.

Showing logs from the Expressway-C, a copy of the Expressway-E certificate, and the UC traversal
zone configuration for the Expressway-C. An office administrator is deploying mobile and remote
access and sees an issue with the UC traversal zone. The zone is showing “TLS negotiation failure”.
What is causing this issue?
A. The Expressway-E certificate includes the Expressway-C FQDN as a SAN entry
B. The Expressway-C is missing the FQDN of Cisco UCM in the Common Name of its certificate
C. In the UC Traversal Zone on the Expressway-C, the peer address is set to the IP of the
Expressway-E,
which is not a SAN entry in the Expressway-E certificate
D. The Expressway-E does not have the FQDN of Cisco UCM listed as a SAN in its certificate
Answer: D
26.A Webex engineer is configuring SSO in Control Hub with Active Directory Federation Services.
The engineer wants to authenticate users for all the applications that they are given rights to. The
engineer also wants to eliminate further prompts when users switch applications during a particular
session.
Which action tells ADFS the fields to map to Webex to identify a user?
A. Send LDAP attributes as claims.
B. Create claim rules for Webex authentication
C. Add a relving party trust to the ADFS.
D. Map the E-mail-addresses LDAP attribute to the uid outgoing claim type.
Answer: D

27.An engineer must review a new traversal zone that is not establishing a successful connection
between Expressway-C and Expressway-E. When the event log page on the Expressway-E is
reviewed, an authentication failure is found with the detail “user not found”.
Which two actions must the engineer take to resolve the issue? (Choose two.)
A. Disable TLS verification on the Expressway-E.
B. Ensure that the authentication credentials configured on both zones to match.
C. Ensure that LDAP is properly configured and synchronized on the Expressway-E.
D. Ensure that the authentication credentials exist on the Expressway-E local database.
E. Ensure that the authentication credentials exist on the Expressway-C local database.
Answer: B, D

28.An administrator has been asked to configure Video Mesh signaling traffic to route through a
proxy.
Which is an available proxy type in the Video Mesh node configuration to support this deployment
model?
A. Transparent Explicit Proxy
B. Transparent Inspecting Proxy
C. Reverse Proxy
D. Distorting Proxy
Answer: B

29.Which zone is required between Expressway-E and Expressway-C in Mobile and Remote Access
deployments?
A. Unified Communications traversal zone
B. neighbor zone
C. DNS zone
D. traversal zone
Answer: A

30.Refer to the exhibit.

 Which two numbers match the regular expression? (Choose two.)
A. d20d16d20d22
B. 2091652010224
C. 209165200225
D. d209d165d200d224
E. 209165200224
Answer: CE

31.Which zone is required on a B2B deployment between Expressway-C and Expressway-E?

A. traversal zone
B. DNS zone
C. default zone
D. neighbor zone
Answer: A

Get 300-820 exam dumps full version.

Powered by TCPDF (www.tcpdf.org)