RZ1-K (AS) XLPE LSZH Flexible1.
8/3kV Cable
APPLICATION STANDARDS
Single Core flame retardant LSZH flexible power cable suitable IEC 60502-1, EN 60228, UNE 21123-4
for fixed installations in public and high traffic areas. Flame non-propagation IEC/EN 60332-1 / IEC/EN 60332-3
Low corrosive gases emission IEC/EN 60754-1/2
Low smoke emission (Light transmittance >60%) IEC/EN 61034
CHARACTERISTICS Chemical & Oil resistance: acceptable
UV resistant based on EN 50618 & UNE 211605
Voltage Rating Uo/U (Um)
Water resistance: AD7 immersion (limited to 2 months)
1.8/3 (3.6) kV
Abrasion resistance: AD2
Voltage Test
Alternating Current: 6,5 kV
THE CABLE LAB®
Direct Current: 15 kV
AN ISO/IEC 17025 AND IECEE CBTL ACCREDITED FACILITY
Temperature Rating Our world-class testing facility assures the quality and compliance of this cable
through a continuous and rigorous testing regime.
-30°C to +60°C (to -40oC fixed installation)
Maximum conductor temperatures: 90°C
Short circuit: 250° C (t≤ 5s)
Minimum Bending Radius
5 x overall diameter (25≤ D ≤ 50) SUSTAINABILITY COMMITMENT
6x overall diameter (D>50)
We are on a journey to Net Zero.
We've committed to near-term emissions reductions and a net-zero target with the
Science Based Targets initiative and we're a signatory to the United Nations Global
CONSTRUCTION Compact Sustainable Development Goals.
Conductor Learn more about embodied carbon and our carbon emissions reduction actions,
our comprehensive recycling services, and wider ESG activities for sustainable
Class 5 flexible copper conductor
operations at: www.elandcables.com/company/about-us/esg-sustainability
Insulation
XLPE (Cross-Linked Polyethylene)
Sheath
LSZH (Low Smoke Zero Halogen) type ST8 (to IEC 60502-1)
and type DMZ-E (to UNE 21123-4)
REGULATORY COMPLIANCE
Sheath Colour This cable is compliant with European Regulation EN 50575, the Construction
Green Black Products Regulation.
This cable meets the requirements of the Low Voltage Directive 2014/35/EU, the
RoHS Directive 2015/65/EU and Reach Directive EC 1907/2006. RoHS
compliance has been tested and confirmed by The Cable Lab®.
UK T 020 7241 8787 | F 020 7241 8700 | [email protected] | www.elandcables.com
International T +44 20 7241 8740 | F +44 20 7241 8700 |
[email protected] technicalspecification
DIMENSIONS
ELAND PART NO. OF NOMINAL NOMINAL NOMINAL NOMINAL NOMINAL NOMINAL NOMINAL
CROSS CONDUCTOR INSULATION DIAMETER OVER SHEATH OUTER SHEATH WEIGHT MINIMUM
NUMBER CORES INSULATION
SECTIONAL DIAMETER THICKNESS THICKNESS DIAMETER kg/km BENDING RADIUS
AREA mm mm mm mm mm mm
mm2
During After
installation installation
A9R01095/3KV** 1 95 11.8 2.0 15.8 1.6 19.0 993 190 152
A9R01120/3KV** 1 120 13.8 2.0 17.8 1.7 21.2 1216 212 170
A9R01150/3KV** 1 150 15.0 2.0 19.0 1.7 22.4 1485 224 179
A9R01185/3KV** 1 185 16.5 2.0 20.5 1.8 24.1 1796 241 193
A9R01240/3KV** 1 240 19.1 2.0 23.1 1.9 26.9 2315 269 215
A9R01300/3KV** 1 300 21.6 2.0 25.6 2.0 29.6 2859 294 235
A9R01400/3KV** 1 400 26.6 2.0 30.6 2.1 34.8 3643 348 278
** Designates the sheath colour. For each part number replace with the colour code reference - GN (Green) or BK (Black) eg: A9R01185/3KVGN = 185mm2 Green
ELECTRICAL CHARACTERISTICS
NOMINAL CROSS MAXIMUM CONDUCTOR DC MAXIMUM CONDUCTOR AC MAXIMUM CURRENT RATING VOLTAGE DROP COS
SECTIONAL AREA RESISTANCE AT 20 °C RESISTANCE AT 90 °C A Φ= 0,8
mm2 Ω/Km Ω/Km V/A.km
Air 30ºC Buried 20ºC
95 0.206 0.263 328 270 0.438
120 0.161 0.205 383 306 0.358
150 0.129 0.164 404 343 0.313
185 0.0991 0.128 510 387 0.262
240 0.0801 0.1021 552 448 0.223
300 0.0641 0.0817 639 502 0.193
400 0.0486 0.0620 823 558 0.164
On the Air the current rating is in according to IEC 60364-5-52 table B.52.12, installation method F, (three loaded conductors for single-core cables)
Buried the current rating is in accordance to IEC 60364-5-52, table B.52.3 method of installation D2 (Two loaded conductors for single-core cables).
For different installation conditions, appropriate correction factors must be considered.
The information contained within this datasheet is for guidance only and is subject to change without notice or liability. All the information is provided in good faith and is
believed to be correct at the time of publication. When selecting cable accessories, please note that actual cable dimensions may vary due to manufacturing tolerances.
UK T 020 7241 8787 | F 020 7241 8700 | [email protected] | www.elandcables.com
technicalspecification International T +44 20 7241 8740 | F +44 20 7241 8700 |
[email protected]
