3HE00028CA-C
Alcatel-Lucent Nokia® 3HE00028CA Compatible TAA 1000Base-LX SFP Transceiver (SMF, 1310nm, 10km, LC,
DOM)
Features:
• INF-8074 and SFF-8472 Compliance
• Duplex LC Connector
• Fabry Perot transmitter and PIN receiver
• Single-mode Fiber
• Commercial Temperature 0 to 70 Celsius
• Hot Pluggable
• Metal with Lower EMI
• Excellent ESD Protection
• RoHS Compliant and Lead Free
Applications:
• 1000Base-LX Ethernet
• 1x Fibre Channel
• Access and Enterprise
Product Description
This Alcatel-Lucent Nokia® 3HE00028CA compatible SFP transceiver provides 1000Base-LX throughput up to
10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It is guaranteed to be
100% compatible with the equivalent Alcatel-Lucent Nokia® transceiver. This easy to install, hot swappable
transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it
will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access
to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind
the quality of our products and proudly offer a limited lifetime warranty.
ProLabs’ transceivers are RoHS compliant and lead-free.
TAA refers to the Trade Agreements Act (19 U.S.C. & 2501-2581), which is intended to
foster fair and open international trade. TAA requires that the U.S. Government may
acquire only “U.S. – made or designated country end products.”
Rev. 111323
Absolute Maximum Ratings
Parameter Symbol Min. Max. Unit
Maximum Supply Voltage Vcc -0.5 4.0 V
Storage Temperature Tstg -40 85 °C
Operating Case Temperature Tc 0 70 °C
Operating Humidity RH 5 85 %
Receiver Power RMAX 0 dBm
Maximum Bitrate Bmax 1.25 Gbps
Electrical Characteristics (Tc=25°C, Vcc=3.3 Volts)
Parameter Symbol Min. Typ. Max. Unit Notes
Power Supply Voltage Vcc 3.15 3.30 3.43 V
Power Supply Current Icc 303 mA
Power Consumption 1 W
Transmitter
Differential Data Input Swing VIN,pp 120 850 mV
Input Differential Impedance ZIN 80 100 120 Ω
Receiver
Differential Data Output Swing VOUT,pp 300 850 mV
Output Differential Impedance ZIN 80 100 120 Ω
Optical Characteristics
Parameter Symbol Min. Typ. Max. Unit Notes
Transmitter
Optical Power (Average) PAVE -9.5 -3 dBm 1
Optical Extinction Ratio ER 9 dB
Optical Wavelength Tλ 1270 1310 1355 nm
Insertion Loss IL 0.6
Receiver
Receiver Sensitivity (Average) RAVE -24 dBm 3
Receiver Overload Pmax 0 dBm 4
Optical Return Loss ORL 12 dB
Receiver Wavelength Rλ 1260 1565 nm
Notes:
1. Coupled into a single-mode fiber.
2. Per IEEE 802.3ah specification.
3. Average power, back-to-back, @1.25Gbps, BER 1E-12, and PRBS 231-1.
4. Exceeding the Receiver Overload can physically damage the module. Please use appropriate attenuation.
Pin Descriptions
Pin Symbol Name/Description Notes
1 VeeT Transmitter Ground (Common with Receiver Ground). 1
2 Tx_Fault Transmitter Fault. Not Supported.
3 Tx_Disable Transmitter Disable. Laser output disabled on “high” or “open.” 2
4 MOD_DEF (2) Module Definition 2. Data Line for Serial ID. 3
5 MOD_DEF (1) Module Definition 1. Clock Line for Serial ID. 3
6 MOD_DEF (0) Module Definition 0. Grounded within the module. 3
7 Rate Select No Connection Required.
8 LOS Loss of Signal Indication. “Logic 0” indicates normal operation. 4
9 VeeR Receiver Ground (Common with Transmitter Ground). 1
10 VeeR Receiver Ground (Common with Transmitter Ground). 1
11 VeeR Receiver Ground (Common with Transmitter Ground). 1
12 RD- Receiver Inverted Data Out. AC Coupled.
13 RD+ Receiver Non-Inverted Data Out. AC Coupled.
14 VeeR Receiver Ground (Common with Transmitter Ground). 1
15 VccR Receiver Power Supply.
16 VccT Transmitter Power Supply.
17 VeeT Transmitter Ground (Common with Receiver Ground). 1
18 TD+ Transmitter Non-Inverted Data In. AC Coupled.
19 TD- Transmitter Inverted Data In. AC Coupled.
20 VeeT Transmitter Ground (Common with Receiver Ground). 1
Notes:
1. The circuit ground is isolated from the chassis ground.
2. Disabled: TDIS>2V or Open, Enabled: TDIS<0.8V.
3. Should be pulled up with 4.7kΩ to 10kΩ on the host board to a voltage between 2V and 3.6V.
4. LOS is an open collector output.
Pin-Out of Connector Block on the Host Board
Recommended Circuit Schematic
Mechanical Specifications
Small Form Factor Pluggable (SFP) transceivers are compatible with the dimensions defined by the SFP Multi-
Sourcing Agreement (MSA).
EEPROM Information
EEPROM memory map-specific data field description is as below:
About ProLabs
Our experience comes as standard; for over 15 years ProLabs has delivered optical connectivity solutions that
give our customers freedom and choice through our ability to provide seamless interoperability. At the heart
of our company is the ability to provide state-of-the-art optical transport and connectivity solutions that are
compatible with over 90 optical switching and transport platforms.
Complete Portfolio of Network Solutions
ProLabs is focused on innovations in optical transport and connectivity. The combination of our knowledge of
optics and networking equipment enables ProLabs to be your single source for optical transport and
connectivity solutions from 100Mb to 400G while providing innovative solutions that increase network
efficiency. We provide the optical connectivity expertise that is compatible with and enhances your switching
and transport equipment.
Trusted Partner
Customer service is our number one value. ProLabs has invested in people, labs and manufacturing capacity
to ensure that you get immediate answers to your questions and compatible product when needed. With
Engineering and Manufacturing offices in the U.K. and U.S. augmented by field offices throughout the U.S.,
U.K. and Asia, ProLabs is able to be our customers best advocate 24 hours a day.
Contact Information
ProLabs US
Email: [email protected]
Telephone: 952-852-0252
ProLabs UK
Email: [email protected]
Telephone: +44 1285 719 600
