STUDI R&R R
SAGE-FOR-QUA-77
GAGE REPEATABILITY AND REPRODUCIBILITY DATA SHEET Révision : 00
Date : 22/06/2020
Part Number Gage Name MALEK HARRAN
L002716647FM8AA RGL02
Part Name Gage Number FOUED HOMRANI
139-FODERA CA SX 4W MY23 1
Characteristic Specification Gage Type YOUSSEF KHALOUI
length of 10 stitch(french seam) 40 50 RULER
Trials Parts Appraisers Date Performed
3 10 3 15/03/2022
APPRAISER/ PART AVERAGE Measurement Unit Analysis % Tolerance (Tol)
TRIAL # 1 2 3 4 5 6 7 8 9 10 Repeatability - Equipment Variation (EV)
1. A 1 45 45 45 45 45 45 45 45 44 45 44,900 EV = R x K1 Trials K1 % EV = 100 (EV/Tol)
2, 2 45 45 45 45 45 45 45 45 44 45 44,900 = 0.000 x 0,5907 2 0,8865 = 100(0.000/0.002)
3, 3 45 45 45 45 45 45 45 45 44 45 44,900 = 0% 3 0,5907 = 0,00
4, AVE 45 45 45 45 45 45 45 45 44 45 xa= 44,900 Reproducibility - Appraiser Variation (AV)
5, R 0 0 0 0 0 0 0 0 0 0 ra= 0,000 AV = {(xDIFF x K2)2 - (EV2/nr)}1/2 % AV = 100 (AV/Tol)
6. B 1 45 45 45 45 46 44 45 45 45 45 45,000 = {(0.000 x 0,5236)^2 - (0.000 ^2/(10 x 3))}^1/2 = 100(0.000/0.002)
7, 2 45 45 45 45 46 44 45 45 45 45 45,000 = 5% = 3,14
8, 3 45 45 45 45 46 44 45 45 45 45 45,000 Appraisers 2 3
9, AVE 45 45 45 45 46 44 45 45 45 45 xb= 45,000 n = parts r = trials K2 0,7087 0,5236
10, R 0 0 0 0 0 0 0 0 0 0 rb= 0,000 Repeatability & Reproducibility (GRR) % GRR = 100 (GRR/Tol)
2 2 1/2
11. C 1 44 45 45 45 44 45 45 45 45 46 44,900 GRR = {(EV + AV )} Parts K3 = 100(0.000/0.002)
12, 2 44 45 45 45 44 45 45 45 45 46 44,900 = {(0.000^2 + 0.000^2)}^1/2 2 0,7087 = 3,14
13, 3 44 45 45 45 44 45 45 45 45 46 44,900 = 0,052 3 0,5236 Gage system O.K
14, AVE 44 45 45 45 44 45 45 45 45 46 xc= 44,900 Part Variation (PV) 4 0,4464
15, R 0 0 0 0 0 0 0 0 0 0 rc= 0,000 PV = RP x K3 5 0,4032 % PV = 100 (PV/Tol)
16. PART X= 44,933 = 0.001 x 0,3145 6 0,3745 = 100(0.000/0.002)
AVERAGE 44,67 45,00 45,00 45,00 45,00 44,67 45,00 45,00 44,67 45,33 Rp= 0,667 = 0,210 7 0,3534 = 12,58
17, (ra + rb + rc) / (# OF APPRAISERS) = R= 0,000 Tolerance (Tol) 8 0,3378
18, xDIFF = (Max x - Min x) = xDIFF= 0,100 Tol = Upper - Lower / 6 9 0,3247 ndc = 1.41(PV/GRR)
19, * UCLR = R x D4 = UCLR= 0,000 = ( 50 - 40 ) / 6 10 0,3145 = 1.41(0.000/0.000)
= 1,667 = 5
* D4 =3.27 for 2 trials and 2.58 for 3 trials. UCLR represents the limit of individual R's. Circle those that are Gage discrimination acceptable
beyond this limit. Identify the cause and correct. Repeat these readings using the same appraiser and unit as originally used or
discard values and re-average and recompute R and the limiting value from the remaining observations. For information on the theory and constants used in the form see MSA Reference Manual , Third edition.
Notes: We have conducted the Gage test on a union sew which was first measured with the calibrated ruller in order to determine the reference for the sewing step.
The present Gage R&R is meant to determine the correct measurement analisys for the rullers used in production.
The test will be made on groups of 10 rullers.
SAGE-FOR-QUA-77
GAGE REPEATABILITY AND REPRODUCIBILITY DATA SHEET Révision : 00
Date : 22/06/2020
Part Number Gage Name MALEK HARRAN
L0782887AA01 PAC-02
Part Name Gage Number FOUED HOMRANI
RETAINER - FLAT STRIP,PP plate 1
Characteristic Specification Gage Type YOUSSEF KHALOUI
thikness 1,20 1,80 CALIPER
Trials Parts Appraisers Date Performed
3 10 3 15/03/2022
APPRAISER/ PART AVERAGE Measurement Unit Analysis % Tolerance (Tol)
TRIAL # 1 2 3 4 5 6 7 8 9 10 Repeatability - Equipment Variation (EV)
1. A 1 1,60 1,52 1,61 1,50 1,51 1,60 1,61 1,51 1,51 1,50 1,547 EV = R x K1 Trials K1 % EV = 100 (EV/Tol)
2, 2 1,61 1,51 1,60 1,50 1,50 1,61 1,61 1,51 1,50 1,51 1,546 = 0.000 x 0,5907 2 0,8865 = 100(0.000/0.000)
3, 3 1,60 1,51 1,60 1,51 1,51 1,61 1,61 1,51 1,50 1,51 1,547 = 0% 3 0,5907 = 4,61
4, AVE 1,60 1,51 1,60 1,51 1,51 1,61 1,61 1,51 1,50 1,51 xa= 1,547 Reproducibility - Appraiser Variation (AV)
5, R 0,01 0,01 0,01 0,00 0,01 0,01 0,00 0,00 0,01 0,01 ra = 0,006 AV = {(xDIFF x K2)2 - (EV2/nr)}1/2 % AV = 100 (AV/Tol)
6. B 1 1,60 1,51 1,60 1,51 1,51 1,60 1,61 1,51 1,51 1,50 1,546 = {(0.000 x 0,5236)^2 - (0.000 ^2/(10 x 3))}^1/2 = 100(0.000/0.000)
7, 2 1,60 1,51 1,61 1,51 1,51 1,61 1,61 1,50 1,52 1,51 1,550 = 0% = 0,00
8, 3 1,60 1,51 1,60 1,51 1,51 1,61 1,60 1,52 1,50 1,50 1,547 Appraisers 2 3
9, AVE 1,60 1,51 1,61 1,51 1,51 1,61 1,61 1,51 1,51 1,51 xb= 1,548 n = parts r = trials K2 0,7087 0,5236
10, R 0,00 0,00 0,01 0,00 0,00 0,01 0,01 0,01 0,01 0,01 rb = 0,008 Repeatability & Reproducibility (GRR) % GRR = 100 (GRR/Tol)
11. C 1 1,60 1,51 1,61 1,51 1,51 1,60 1,61 1,51 1,50 1,50 1,548 GRR = {(EV2 + AV2)}1/2 Parts K3 = 100(0.000/0.000)
12, 2 1,60 1,51 1,60 1,51 1,51 1,62 1,61 1,50 1,51 1,51 1,549 = {(0.000^2 + 0.000^2)}^1/2 2 0,7087 = 4,61
13, 3 1,60 1,51 1,61 1,51 1,51 1,60 1,60 1,51 1,50 1,51 1,546 = 0,005 3 0,5236 Gage system O.K
14, AVE 1,60 1,51 1,61 1,51 1,51 1,61 1,61 1,51 1,50 1,51 xc= 1,547 Part Variation (PV) 4 0,4464
15, R 0,00 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 rc = 0,009 PV = RP x K 3 5 0,4032 % PV = 100 (PV/Tol)
16. PART X= 1,547 = 0.000 x 0,3145 6 0,3745 = 100(0.000/0.000)
AVERAGE 1,60 1,51 1,61 1,51 1,51 1,61 1,61 1,51 1,51 1,51 Rp = 0,104 = 0,033 7 0,3534 = 32,58
17, (ra + rb + rc) / (# OF APPRAISERS) = R= 0,008 Tolerance (Tol) 8 0,3378
18, xDIFF = (Max x - Min x) = xDIFF= 0,001 Tol = Upper - Lower / 6 9 0,3247 ndc = 1.41(PV/GRR)
19, * UCLR = R x D4 = UCLR= 0,020 = ( 1,8 - 1,2 ) / 6 10 0,3145 = 1.41(0.000/0.000)
= 0,100 = 9
* D4 =3.27 for 2 trials and 2.58 for 3 trials. UCLR represents the limit of individual R's. Circle those that are Gage discrimination acceptable
beyond this limit. Identify the cause and correct. Repeat these readings using the same appraiser and unit as originally used or
discard values and re-average and recompute R and the limiting value from the remaining observations. For information on the theory and constants used in the form see MSA Reference Manual , Third edition.
Notes: We have conducted the Gage test on a union sew which was first measured with the calibrated ruller in order to determine the reference for the sewing step.
The present Gage R&R is meant to determine the correct measurement analisys for the rullers used in production.
The test will be made on groups of 10 rullers.
SAGE-FOR-QUA-31
ATTRIBUTE GAGE R&R FORM Révision: 00
Date:29/02/2020
Part Number : L002716645FM8AA Date : 01/12/2022
Characteristic : SEWING SPEC Type of control : Visual Inspection
Number of repetitions : 3 Number of parts : …… 20
Std Value DONIA HEDHLI SANA ZITOUNI OUMAYMA KHEDHRI SIWAR SAKHER
1 OK OK OK OK OK OK OK OK OK OK OK OK OK
2 OK OK OK OK OK OK OK OK OK OK OK OK OK
3 OK OK OK OK OK OK OK OK OK OK OK OK OK
4 OK OK OK OK OK OK OK OK OK OK OK OK OK
5 OK OK OK OK OK OK OK OK OK OK OK OK OK
6 OK OK OK OK OK OK OK OK OK OK OK OK OK
7 OK OK OK OK OK OK OK OK OK OK OK OK OK
8 OK OK OK OK OK OK OK OK OK OK OK OK OK
9 OK OK OK OK OK OK OK OK OK OK OK OK OK
10 OK OK OK OK OK OK OK OK OK OK OK OK OK
11 NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK
12 NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK
13 NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK
14 NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK
15 NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK
16 NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK
17 NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK
18 NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK
19 NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK NOK
20 NOK NOK NOK NOK NOK NOK OK NOK NOK NOK NOK NOK NOK
ATTRIBUTE GAGE R&R RESULTS (%)
ASSESSMENTS DONIA HEDHLI SANA ZITOUNI OUMAYMA KHEDHRI SIWAR SAKHER
Inspector score 95,0 90,0 95,0 95,0
Agreement 95,0 90,0 95,0 95,0
Each
Disagreement
inspector 0,0 0,0 0,0 0,0
OK/NOK
versus Std
Disagreement
0,0 0,0 0,0 0,0
NOK/OK
Between inspectors 90,0
All inspectors versus Std 90,0
4/4
