KOLEJ VOKASIONAL LOGO KV
JABATAN PENDIDIKAN UMUM
RANGKA KURSUS
COURSE OUTLINE
MAKLUMAT KURSUS
(COURSE INFORMATION)
SEMESTER/SESI (SEMESTER/SESSION) : SEMESTER 2
KOD KURSUS (COURSE CODE) : USM2112
NAMA KURSUS (NAME OF COURSE) : SAINS BAHAN
MASA PEMBELAJARAN PELAJAR (STUDENT LEARNING TIME) : -
Kategori Aktiviti Aktiviti Pembelajaran Jumlah Jam/Semester
(Category of Activities) (Learning Activity) (Total Hours/Semester)
Kuliah
14
(Lecture)
Tutorial
0
Pengajaran & Pembelajaran (Tutorial)
(Teaching & Learning) Aktiviti Pembelajaran Berpusatkan Pelajar / Praktikal
28
Student Centered Learning activities (SCL) / Practical
Masa Persediaan
18
(Non face to face)
Pertemuan Bersemuka
3.5
Pentaksiran Berterusan (Face to Face)
(Continous Assessment) Masa Persediaan
8.5
(Non face to face)
Pertemuan Bersemuka
2
Penilaian Akhir (Face to Face)
(Final Examination) Masa Persediaan
6
(Non face to face)
JUMLAH KESELURUHAN SLT
80
(GRAND TOTAL SLT)
NILAI KREDIT
2
(CREDIT VALUE)
Kursus Pra-syarat (Pre-Requisite Course) : TIADA
Nama Pensyarah (Name of Lecturer) :
Disediakan oleh : Disahkan oleh : KETUA JABATAN PENDIDIKAN
(Prepared by) PENYELARAS KURSUS (Approved by) UMUM
Tandatangan : Tandatangan :
(Signature) (Signature)
Nama (Name) : Nama (Name) :
Tarikh (Date) : Tarikh (Date) :
USM2112 SAINS BAHAN
Dikemas kini Disember 2024
KOLEJ VOKASIONAL LOGO KV
JABATAN PENDIDIKAN UMUM
MATLAMAT (GOALS) :
Kursus ini membantu pelajar memperoleh pengetahuan, kemahiran dan sikap yang betul tentang hubungan antara sifat-sifat, struktur
dan proses bahan kejuruteraan dan penekanan terhadap asas-asas untuk memilih bahan-bahan berdasarkan kriteria rekabentuk
kejuruteraan
SINOPSIS (SYNOPSIS):
This course introduces students about the characteristics of the most important materials in modern engineering design. Therefore, the
study of solid-state materials and the relationship between physical structure and their characteristics is an important component in the
study of technology mechanical and manufacturing. Others than that, this course provides a constitutional framework for understanding
the behaviour of engineering materials by emphasizing the important relationship between in the internal structure. It also attempts to
deliver the general overview of the nature material and the mechanisms by modify and control engineering material. In addition,
experiments in the mechanical testing to discover the mechanical properties of the materials. While Phase Diagram also exposed in this
course due to important graphical information to indicate the character of an element, mixture, and solution of materials.
HASIL PEMBELAJARAN (LEARNING OUTCOMES):
Setelah menamatkan kursus ini, pelajar akan mampu untuk :
CLO1 Menerangkan lima (5) sifat – sifat bahan (konsep tegasan dan terikan, ubah bentuk anjal atau plastik, kemuluran,
kekerasan dan keliatan) secara bertulis dengan jelas. (C2, PLO1, LD1)
CLO2 Menunjukkan kemahiran manipulatif semasa menjalankan amali mengikut standard American Society for Testing
and Materials (ASTM). (P2, PLO2, LD3a)
CLO3 Mengamalkan sikap saintifik dalam kumpulan semasa menjalankan amali di dalam makmal (A2, PLO5, LD3b)
ISI KANDUNGAN (CONTENT)
MINGGU KANDUNGAN PENTAKSIRAN
SLT
(WEEK) (CONTENT) (ASSESSMENT)
1-2 INTRODUCTION TO MATERIALS
1.1 Classify the materials
1.0 10 Ujian 1
1.2 State the general properties of materials
1.3 Describe the Advanced Materials
3-4 ATOMIC & CRYSTAL STRUCTURE
Describe the type Primary Interatomic
2.1
Bonding
Ujian 2
2.0 10
Describe the type Secondary Bonding (Van
2.2
Der Waals Bonding
5-6 3.0 FUNDAMENTAL CONCEPT OF CRYSTAL 10 Ujian 3
USM2112 SAINS BAHAN
Dikemas kini Disember 2024
KOLEJ VOKASIONAL LOGO KV
JABATAN PENDIDIKAN UMUM
STRUCTURE
Introduction to crystalline and non-
3.1
crystalline (amorphous) structure
Penilaian Akhir
3.2 Identify the Lattice and unit Cell
Determine the type of metallic crystal
3.3
structures (BCC FCC, HCP)
7-10 MECHANICAL PROPERTIES OF METAL
Describe concepts mechanical properties of
4.1 Tugasan Berkumpulan
metallic material
(Amali 1)
4.2 Describe Elastic and Plastic Deformation
4.0 24 Tugasan Berkumpulan
Discuss the Engineering Mechanical
4.3 (Amali 2)
Properties
Penilaian Akhir
4.4 Perform Mechanical Testing (Experiment)
4.5 Describe the type of Imperfection in Metal
11-14 PHASES DIAGRAMS
5.1 Define the concept Phase Diagram
5.2 Interpretation of Phase Diagram
5.0 Discuss of Binary Phase Diagrams (Two 18 Penilaian Akhir
5.3
Component Systems)
5.4 Describe of Binary Diagram Types
5.5 Applications of Phase Diagram
15-17 PENILAIAN AKHIR 8
JUMLAH 80
AMALI (PRACTICAL):
1. Students are given the chance to discuss and solve the appropriate problems in class sessions regarding engineering
materials.
2. Sketching, calculate and explanation the mechanical properties and phase diagrams.
3. Carry out experiments for mechanical testing.
PENILAIAN (ASSESSMENT):
Bil. Jenis Pentaksiran Agihan Peratus
1. Pentaksiran Berterusan (Continuous Assessment) : 60%
1.1 Ujian 1 : 10%
1.2 Ujian 2 : 10%
1.3 Ujian 3 : 10%
2 2.1 Tugasan Berkumpulan (Amali 1)
Domain Psikomotor (CLO2) : 10%
USM2112 SAINS BAHAN
Dikemas kini Disember 2024
KOLEJ VOKASIONAL LOGO KV
JABATAN PENDIDIKAN UMUM
- Amali dan Laporan Amali (10%)
Domain Afektif (CLO3)
: 5%
- Tugasan Berkumpulan (5%)
2.2 Tugasan Berkumpulan (Amali 2)
Domain Psikomotor (CLO2)
: 10%
- Amali dan Laporan Amali (10%)
Domain Afektif (CLO3)
: 5%
- Tugasan Berkumpulan (5%)
3. Penilaian Akhir (Final Examination) : 40%
3.1 Teori : 40%
Jumlah : 100%
JADUAL SPESIFIKASI PENILAIAN (ASSESSMENT SPECIFICATIONS TABLE):
PENTAKSIRAN BERTERUSAN PENILAIAN
AKHIR
T Tu
ug ga
as sa
an n
B Be
U U U
er A
JI JI JI rk TE
ku M
No. TOPIK CLO A A A u O
m A
N N N m RI
pu LI
1 2 3 pu
la la
n n(
(A AM
MA ALI
LI 2)
1)
10% 10% 10% 15% 15% 40%
1. Introduction To Materials CLO1 X -
2. Atomic & Crystal Structure CLO1 X -
Fundamental Concept of Crystal
3 CLO1 X X -
Structure
CLO1 X -
4 Mechanical Properties of Metal CLO2 X X -
CLO3 X X -
USM2112 SAINS BAHAN
Dikemas kini Disember 2024
KOLEJ VOKASIONAL LOGO KV
JABATAN PENDIDIKAN UMUM
5 Phases Diagrams CLO1 X -
CADANGAN MASA UNTUK PENILAIAN (SUGESTED TIME FOR ASSESSMENT):
Cadangan Masa
Bil. Jenis Pentaksiran Diperuntukkan
1. Pentaksiran Berterusan (Continuous Assessment) :
1.1 Ujian 1 : 30 minit
Ujian 2 : 30 minit
Ujian 3 : 30 minit
1.2 Tugasan Berkumpulan (Amali 1) : 60 minit
Tugasan Berkumpulan (Amali 2) : 60 minit
:
2. Penilaian Akhir (Final Examination) :
2.1 Teori : 2 jam
2.2 Amali : -
JUMLAH MASA PB & PA
: 5 jam 30 minit (330 minit)
(TOTAL TIME FOR ASSESSMENT)
RUJUKAN (REFERENCES):
1. Shackelford, J. (2022). Introduction to Materials Science for Engineers, Global Edition. United Kingdom: Pearson Education.
2. Askeland, D. R., Wright, W. J. (2020). The Science and Engineering of Materials, Enhanced Edition. United States: Cengage
Learning.
3. Callister, W. D., Rethwisch, D. G. (2020). Callister's Materials Science and Engineering. United States: Wiley.
4. Chung, Y., Kapoor, M. (2022). Introduction to Materials Science and Engineering. United States: CRC Press.
5. Zaleha Mustafa, Qumrul Ahsan, Zulkifli Mohd Rosli, Zurina Shamsudin, Siti Hajar Sheikh MD Fadzullah, (2016), Basic of
Engineering Materials for Beginner Module 21, University Teknikal Malaysia (UTEM).
6. Jasmi Hashim, Sains Bahan, (2013). University Teknologi Malaysia (UTM).
USM2112 SAINS BAHAN
Dikemas kini Disember 2024
KOLEJ VOKASIONAL LOGO KV
JABATAN PENDIDIKAN UMUM
KEHADIRAN/PERATURAN SEMASA KULIAH (LECTURE ATTENDANCE/REGULATION):
1. Pelajar mesti hadir tidak kurang dari 80% masa pertemuan yang ditentukan bagi sesuatu kursus.
Students must attend lectures not less than 80% of the contact hours for every course.
2. Pelajar yang tidak memenuhi perkara (1) di atas tidak dibenarkan menghadiri kuliah dan menduduki sebarang bentuk penilaian
selanjutnya. Markah sifar (0) akan diberikan kepada pelajar yang gagal memenuhi perkara (1).
Students who do not fulfill (1) will not be allowed to attend further lectures and sit for any further examination. Zero mark (0) will
be given to students who fail to comply with (1).
3. Pelajar perlu mengikut dan patuh kepada peraturan berpakaian yang berkuatkuasa dan menjaga disiplin diri masing-masing
untuk mengelakkan dari tindakan tatatertib diambil terhadap pelajar.
Students must obey all rules and regulations of the university and must discipline themselves in order to avoid any disciplinary
actions against them.
4. Pelajar perlu mematuhi peraturan keselamatan semasa proses pembelajaran dan pengajaran.
Student must obey safety regulations during learning and teaching process.
MATRIK HASIL PEMBELAJARAN KURSUS DAN HASIL PEMBELAJARAN PROGRAM
(MATRIX OF COURSE LEARNING OUTCOMES AND PROGRAMME LEARNING OUTCOMES)
Dilampirkan (As attached).
USM2112 SAINS BAHAN
Dikemas kini Disember 2024
KOLEJ VOKASIONAL LOGO KV
JABATAN PENDIDIKAN UMUM
USM2112 SAINS BAHAN
Dikemas kini Disember 2024
