Name of Work : Widening and Strengthening of BapaSitaram Junction to GIFT City Road at Ch.

0+000
to 2+400 Km. Dist. Gandhinagar

BILL OF QUANTITIES

Description of Item
Item Rates In
(with brief specification and reference to book of Quantities Unit Amount
No. Figures
specifications)

1 2 3 4 5 6
[1] Clearing and grubbing road land including uprooting rank 9.00 Hecter 28455.09 256095.81
vegetation, grass, bushes, shrubs, saplings and trees girth up to
300 mm, removal of stumps of trees cut earlier and disposal of
unserviceable material. (C) By mechenical means in area of light
jungle.
[2] Scarifying/Scraping bitumen macadam surface or gravelled 32096.00 Sqm 42.76 1372424.96
macadam 6 cm to 10 cm.depth including stacking useful
materials on road side and disposing off remaining stuff.
[3] Box cutting the road surface to proper slope and camber for 16517.00 Cum 109.24 1804317.08
making a base for road work including removing the excavated
stuff and depositing on the road side slope as directed upto
50Mt.lead.
[4] Construction of sub-grade with approved material obtained from 16517.00 Cum 1036.26 17115906.42
borrow pits with all lifts & leads, transporting to site, spreading,
grading to required slope and compacted to meet requirement of
table No. 300-2 Subgrade CBR ≥ 10 (As per Code No. 3.18)

[5] Construction of granular Sub base by providing natural coarse 10771.00 Cum 1172.61 12630182.31
graded material using 26.5 mm to 9.50 mm@ 45%, aggregate
9.50 mm to 4.75 mm @ 30% and 4.75 mm to 0.075 mm @ 25%
incl. spreading in uniform layers with motor grader on prepared
surface mixing by mix in place method with rotavator at OMC
and compacting with vibratory roller to achieve the desired
density complete as per Clause 401.2 Table 400.1 grade-VI

[6] Providing and laying spreading and compacting graded stone 18854.00 Cum 2196.75 41417524.50
aggregate to wet mix macadam 300 mm thick as per MORT&H
specification including pre mixing the material with water at
OMC in mechanical mix plant, carriage of mixed material by
tippers to site, laying in uniform layers with paver in sub base/
base course on well prepared surface and compacting with
vibratory roller to achieve the desire density. (RA-3)

[7] Providing & laying priming coat with emulsion SS-1 grade and 80731.80 Sqm 62.62 5055425.32
spraying emulsion with spray set fitted on mechanical bouzer
using emulsion at the rate of 7.5 Kg./10 Sqm. On WMM surface
incl. cleaning the surface etc. complete. (RA-4)
[8] Providing and laying 75 mm D.B.M. with B.T. Aggregate as per 13496.00 MT 3912.74 52806339.04
MORT&H specification with VG-40 for tack coat @ 2.5 Kg./10
smt. With Mechanical Sprayer & Bitumen VG-40 Grade for
mixing @ 45.00 Kg./MT. ie. 4.5 % by total weight of mix heating
and mixing the aggregate & asphalt in continuous batch mix
plant and transporting to site and spreading the same by sensor
paver finisher & consolidation with vibratory roller including
providing all materials equipments, tools & plant, fire wood, oil,
kerosene, labour charges etc. complete using contractor's own
machinery batch mix plant & sensor paver finisher etc. complete.
(RA-5)
[9] Providing and laying Bituminous concrete on existing 7511.00 MT 4296.54 32271311.94
bituminous surface and using specification graded machine
crushed with 5.50 % bitumen VG-40 grade by Wt. of total mix as
per specification MORTH including mixing of asphalt with B.T.
chips in continuous batch mix plant transporting same as by
Sensor paver finisher and consolidation the same with pair of 8
tonnes to 10 tonnes vibratory roller to achieve desire density
and including VG-40 grade bitumen, cost of emulsion, cost of
required tools , plants, all machineries, equipment fire wood ,
oil, kerosene, charges etc.complete. (RA-6)
 Description of Item
Item Rates In
(with brief specification and reference to book of Quantities Unit Amount
No. Figures
specifications)

1 2 3 4 5 6
[10] Providing and fixing indicator stone of approved stone as per 201.00 No. 343.27 68997.27
I.R.C. type design in C.C. 1:4:8 including white washing etc.
complete.(ii) Fixing in C.C. 1:5:10
[11] Providing and fixing guard stone as per I.R.C. type design 8.00 No. 350.80 2806.40
including white washing etc. complete.(ii) Fixing in C.C. 1:5:10

[12] Providing and fixing Hectometer as per I.R.C. type design 16.00 No. 356.50 5704.00
including painting, lettering etc. complete.(ii) Fixing in C.C.
1:5:10
[13] Providing and fixing ordinary kilometer stone of pre-cast C.C. 4.00 No. 1293.39 5173.56
1:2:4 including necessary reinforcement as per I.R.C. type design
including fixing in C.C. 1:4:8 including painting, lettering etc.
complete ( For N.H., S.H. and M.D.R.)
[14] Road marking with hot applied thermoplastic paints with 3169.00 Sqm 367.72 1165304.68
reflectorising glass beads on bitumin surface providing and
laying a hot applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads @ 250gms per sqm area,
thickness of 2.5mm is excluding of surface applied glass beds as
per IRC:35-2015. The finished surface to be level, uniform and
free from streaks and holes. zebra patta /bump patta lane/center
line/ edge line/cut patta. The white color marking should
provide liminance coefficinet on cemend road shalll be min 130
mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux
during the service life during the day time. The marking should
meet the performance criteria for night time reflectivity, wet
reflectivity and skid resistance as mentioned in the section-15 of
IRC 35-2015. Warranty for the Retro reflectivity should be two
[15] Cat Eye / Road Stud / RPM: Supplying of Molded Twin Shanks 1851.00 No. 326.23 603851.73
Raised Pavement Markers made of polycarbonate and ABS
moulded body and reflective panels with micro prismatic lens
capable of providing total internal reflection of the light entering
the lens face and shall support a load of 13635 kgs. tested in
accordance to ASTM D 4280 Type H and complying to
Specifications of Category A of MORTH Circular No
RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width
and length shall not exceed 20 mm, 130 mm and 130 mm and
with minimum reflective area of 13 Sqcm on each side and the
slope to the base shall be 35 +/- 5 degree. The strength of
detachment of the integrated cylindrical shanks, (of diameter not
less than 19 +/- 2 mm and height not less than 30+/- 2 mm)
from the body is to be a minimum value of 500 Kgf. Fixing will be
by drilling holes on the road for the shanks to go inside, without
nails and using epoxy resin based adhesive as per manufacturers
recommendation and The color of the marker should be as per
the IRC 35-2015 and as directed by Engineer-in-charge.
[16] Cautionary Warning Sign :-Providing and fixing sign boards 16.00 No. 5077.27 81236.32
made out of 2mm aluminium sheet / 4mm ACP (Aluminum
composite Panel); size 90 x 90 x 90 cms. equilateral triangle as
per design of IRC-67-2012. Pre treated with phospheting process
& acid etching; coated with one coat of epoxy primer and two
coats of best quality epoxy paint ;reflectorised with Micro
Prismatic Grade retro refiective sheeting of Type-11 as per ASTM
D-4956 and latest M.O.S.T.Specifications; 3.6mtr long stand post
of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame
fabricated from suitable size iron angle of 35 x 35 x 3mm;
painted with bestquality epoxy coatings in black and white
bends. The details of symbol for each board shall be as per the
instruction of engineer in charge. The fixing at site shall be in
1:2:4 CC block of size 45 x 45 x 60 Cms. for each leg.including
excavation, curing etc.complete under the supervision of
engineer in charge. A warranty for 10 years for the Retro
reflective sheeting from original manufacturer & a certified copy
of 3 year outdoor exposure test report from third party test lab
for the product offered shall be submitted by contractor. (A)
Class-C Type-11 Retro Reflective sheeting
 Description of Item
Item Rates In
(with brief specification and reference to book of Quantities Unit Amount
No. Figures
specifications)

1 2 3 4 5 6
[17] Regulatory / Mandatory Sign :-Providing and fixing sign boards 22.00 No. 4618.73 101612.06
made out of 2mm aluminium sheet / 4mm ACP (Aluminum
composite Panel); size 60 cms Dia Circle as per design of IRC-67-
2012. Pre reated with phospheting process & acid etching;
coated with one coat of epoxy primer and two coats of best
quality epoxy paint ;reflectorised with Micro Prismatic Grade
retro refiectivesheeting of Type-11 as per ASTM D-4956 and
latest M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x
6mm / 65NB Circular MS Pipe as required and frame fabricated
from suitable size iron angle of 35 x 35 x 3mm; painted with
bestquality epoxy coatings in black and white bends. The details
of symbol foreach board shall be as per theinstruction of
engineer in charge. The fixing at site shall be in 1:2:4 CC blockof
size 45 x 45 x 60 Cms. for each leg.including excavation, curing
etc.complete under the supervision of engineer in charge. A
warranty for 10 years for the Retro reflective sheeting from
original manufacturer & a certified copy of 3 year outdoor
exposure test report from third party test lab for the product
offered shall be submitted by contractor. (A) Class-C Type-11
Retro Reflective sheeting
[18] STOP Sign :-Providing and fixing sign boards made out of 2mm 5.00 No. 7213.42 36067.10
aluminium sheet / 4mm ACP (Aluminum composite Panel); size
90 cms Octagone as per design of IRC-67- 2012. Pre treated with
phospheting process & acid etching; coated with one coat of
epoxy primer and two coats of best quality epoxy paint
;reflectorised with Micro Prismatic Grade retro
refiectivesheeting of Type- 11 as per ASTM D-4956 and latest
M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x 6mm
/ 65NB Circular MS Pipe as required and frame fabricated from
suitable size iron angle of 35 x 35 x 3mm; painted with
bestquality epoxy coatings in black and white bends. The details
of symbol foreach board shall be as per theinstruction of
engineer in charge. The fixing at site shall be in 1:2:4 CC blockof
size 45 x 45 x 60 Cms. for each leg.including excavation, curing
etc.complete under the supervision of engineer in charge. A
warranty for 10 years for the Retro reflective sheeting from
original manufacturer & a certified copy of 3 year outdoor
exposure test report from third party test lab for the product
offered shall be submitted by contractor. (A) Class-C Type-11
Retro Reflective sheeting
[19] Direction (Junction) Sign :-Providing and fixing sign boards 7.00 No. 26572.09 186004.63
made out of 2mm aluminium sheet / 4mm ACP (Aluminum
composite Panel); size 244x122 cms. rectangular as per design
of IRC-67-2012. Pre treated with phospheting process & acid
etching; coated with one coat of epoxy primer and two coats of
best quality epoxy paint ;reflectorised with Micro Prismatic
Grade retro refiectivesheeting of Type-11 as per ASTM D-4956
and latest M.O.S.T.Specifications; 4.0mtr long (2 Nos.) stand post
of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame
fabricated from suitable size iron angle of 50 x 50 x 5mm;
painted with bestquality epoxy coatings in black and white
bends. The details of symbol foreach board shall be as per
theinstruction of engineer in charge. The fixing at site shall be in
1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including
excavation, curing etc.complete under the supervision of
engineer in charge. A warranty for 10 years for the Retro
reflective sheeting from original manufacturer & a certified copy
of 3 year outdoor exposure test report from third party test lab
for the product offered shall be submitted by contractor. (A)
Class-C Type-11 Retro Reflective sheeting
 Description of Item
Item Rates In
(with brief specification and reference to book of Quantities Unit Amount
No. Figures
specifications)

1 2 3 4 5 6
[20] Distance Informatory / Destination Sign :-Providing and fixing 7.00 No. 20918.11 146426.77
sign boards made out of 2mm aluminium sheet / 4mm ACP
(Aluminum composite Panel); size 180x120 cms. rectangular as
per design of IRC-67-2012. Pre treated with phospheting process
& acid etching; coated with one coat of epoxy primer and two
coats of best quality epoxy paint ;reflectorised with Micro
Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM
D- 4956 and latest M.O.S.T.Specifications; 4.0mtr long (2 Nos.)
stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as
required and frame fabricated from suitable size iron angle of 50
x 50 x 5mm; painted with bestquality epoxy coatings in black
and white bends. The details of symbol foreach board shall be as
per theinstruction of engineer in charge. The fixing at site shall
be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each
leg.including excavation, curing etc.complete under the
supervision of engineer in charge. A warranty for 10 years for
the Retroreflective sheeting from original manufacturer & a
certified copy of 3 year outdoor exposure test report from third
party test lab for the product offered shall be submitted by
contractor. (A) Class-C Type-11 Retro Reflective sheeting
[21] Place Identification Sign :-Providing and fixing sign boards made 6.00 No. 14085.46 84512.76
out of 2mm aluminium sheet / 4mm ACP (Aluminum composite
Panel); size 150x90 cms. rectangular as per design of IRC-67-
2012. Pre treated with phospheting process & acid etching;
coated with one coat of epoxy primer and two coats of best
quality epoxy paint ;reflectorised with Micro Prismatic Grade
retro refiectivesheeting of Type-11 as per ASTM D-4956 and
latest M.O.S.T.Specifications; 4.0mtr long (2 Nos.) stand post of
75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame
fabricated from suitable size iron angle of 35 x 35 x 3mm;
painted with bestquality epoxy coatings in black and white
bends. The details of symbol foreach board shall be as per
theinstruction of engineer in charge. The fixing at site shall be in
1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including
excavation, curing etc.complete under the supervision of
engineer in charge. A warranty for 10 years for the Retro
reflective sheeting from original manufacturer & a certified copy
of 3 year outdoor exposure test report from third party test lab
for the product offered shall be submitted by contractor. (A)
Class-C Type-11 Retro Reflective sheeting
[22] Village Name Sign :-Providing and fixing sign boards made out of 2.00 No. 6313.51 12627.02
2mm aluminium sheet / 4mm ACP (Aluminum composite Panel);
size 90x60 cms. rectangular as per design of IRC-67-2012. Pre
treated with phospheting process & acid etching; coated with
one coat of epoxy primer and two coats of best quality epoxy
paint ;reflectorised with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as er ASTM D-4956 and latest
M.O.S.T.Specifications; 3.3mtr long stand post of 75 x 75 x 6mm
/ 65NB cular MS Pipe as required and frame fabricated from
suitable size iron angle of 35 x 35 x 3mm; painted with
bestquality epoxy coatings in black and white bends. The details
of symbol or inscription/letters / numerals for each board shall
be as per the instruction of engineer in charge. The fixing at site
shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each
leg.including excavation, curing etc.complete under the
supervision of engineer in charge. A warranty for 10 years for
the Retro reflective sheeting from original manufacturer & a
certified copy of 3 year outdoor exposure test report from third
party test lab for the product offered shall be submitted by
contractor. (A) Class-C Type-11 Retro Reflective sheeting
 Description of Item
Item Rates In
(with brief specification and reference to book of Quantities Unit Amount
No. Figures
specifications)

1 2 3 4 5 6
[23] Chevron sign :-Providing and fixing sign boards made out of 10.00 No. 4681.35 46813.50
1.5mm aluminium sheet / 3mm ACP (Aluminum composite
Panel); size 60x50 cm as per design of IRC-67- 2012. Pre treated
with phospheting process & acid etching; coated with one coat of
epoxy primer and two coats of best quality epoxy paint
;reflectorised with Micro Prismatic Grade retro
refiectivesheeting of Type- 11 as per ASTM D-4956 and latest
M.O.S.T.Specifications; 3.3 mtr long stand post of 75 x 75 x 6mm
/ 65NB Circular MS Pipe as required and frame fabricated from
suitable size iron angle of 50 x 50 x5mm; painted with
bestquality epoxy coatings in black and white bends. the details
of symbol or inscription / numerals for each board shall be as
per the instruction of engineer in charge.The fixing at site shall
be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each
leg.including excavation, curing etc.complete under the
supervision of engineer in charge. A warranty for 10 years for
the Retro reflective sheeting from originaa manufacturer & a
certified copy of 3 year outdoor exposure test report from third
party est lab for the product offered shall be submitted by
contractor. (A) Class-C Type-11 Retro Reflective sheeting
[24] Hazard Marker Sign :-Providing and fixing sign boards made out 12.00 No. 3666.30 43995.60
of 2.0 mm aluminium sheet / 4 mm ACP (Aluminum composite
Panel); size 90x30 cms. rectangular as per design of IRC-67-
2012. Pre treated with phospheting process & acid etching;
coated with one coat of epoxy primer and two coats of best
quality epoxy paint ;reflectorised with Micro Prismatic Grade
retro refiectivesheeting of Type-11 as per ASTM D-4956 and
latest M.O.S.T.Specifications; 1.8mtr long stand post of 75 x 75 x
6mm / 65NB Circular MS Pipe as required and frame fabricated
from suitable size iron angle of 35 x 35 x 3mm; painted with
bestquality epoxy coatings in black and white bends. The details
of symbol foreach board shall be as per theinstruction of
engineer in charge. The fixing at site shall be in 1:2:4 CC blockof
size 45 x 45 x 60 Cms. for each leg.including excavation, curing
etc.complete under the supervision of engineer in charge. A
warranty for 10 years for the Retro reflective sheeting from
original manufacturer & a certified copy of 3 year outdoor
exposure test report from third party test lab for the product
offered shall be submitted by contractor. (A) Class-C Type-11
Retro Reflective sheeting
[25] Providing & fixing overhead gantry Sign Board high intensity 2.00 No. 1380351.85 2760703.70
grade retro refletive informatory/ Destination Boards 2(six) Nos.
made out of 2mmaluminum sheet, size 180x120cms rectagle as
per the design of IRC-67-2012. Pre-treated with phospheting
process and acid-etching coated with one coat of epoxy primer
and two coats of best quality epoxy paint, reflectorised with
retro refletive sheeting as per latest MOST specification. Letters
and numerals should be as per IRC-30-1968. The details of
symbol of inscription/ Numerals for each board shall be as per
the instruction of engineer in charge. The board shall be
mounted on high level over head type portal frame (Gantry)
made out of M.S. section of suitable side as per detailed drawing
/ design including cost of erection and painting. (RA-7)
[26] Dismantling Kerb Concrete (Dismantling kerb stone by manual 4012.00 Rmt 12.12 48625.44
means and disposal of dismantled material with all lead and lift)

[27] Providing and fixing pre-cast concrete kerb stone of gray cement 12036.00 Rmt 374.92 4512537.12
based concrete block 60cm length,30cm height and 15cm thick
of M250 grade concret as per approved design and including
excavation for fixing in proper line and level,filling the joint with
C:M 1:3 (1cement:3fine sand) etc complete.
 Description of Item
Item Rates In
(with brief specification and reference to book of Quantities Unit Amount
No. Figures
specifications)

1 2 3 4 5 6
[28] Applying oil Painting two coats to Center verge (Kerb) by 10832.40 Sqm 92.20 998747.28
Yellow/white and Black patta over one coat of primer with
enamel paint, brushing, interior to give an even shade including
cleaning the surface an even shade including cleanicn the surface
of all dirt, dust and other foreign matter. and cost of material
required for paint and all labour worketc complete as per
direction.

[29] Median Marker : Providing and Fixing of 3M Median Marker that 446.00 No. 271.69 121173.74
are made of tough, high impact resistant, injection-molded,
thermoplastic body with property of flexibility to provide high
durability. . The dimension of Flexible Median Marker should not
exceed 18.4 cm in height(including shank eight),12.5 Cm in
width. ,0.65 cm in thickness and shank depth shall be 3.4 cm The
body structure shall be rounded at all its corners and edges. The
ABS plastic used for molding the Median Marker should survive
impact load of 5kg continuously for 750 times at room
temperature. The logo of the manufacturer shall be embossed on
either side of the body in the injection molding process. The
Median Marker shall have flame like shaped body with,
fluorescent yellow color retro-reflective sheeting of size not less
than 90 Cm square, with fully reflective micro prismatic cube
corners as its retro-reflective elements as per IRC 67 2012 and
ASTM D4956-09 type XI specifications reflectivity values. The
retro-reflective sheeting shall be one or both sides of the Median
Marker and shall be edge protected with no exposed edges
which will prevent edge lifting, vandalism, sheeting damage, etc.
The Median Marker shall be fixed by a combination of epoxy
adhesive and grouting as recommended by manufacturer and
Engineer in charge.
[30] Earthwork for embankment including breaking clods, dressing 23471.00 Cum 177.91 4175725.61
with all lead and lift (excluding watering and consolidation)

[31] Type - B, "THRIE" : Metal Beam Crash Barrier (Providing and 4012.00 Rmt 3996.57 16034238.84
erecting a"Thrie" metal beam crash barrier comprising of 3 mm
thick corrugated sheet metal beam rail, 85 cm above
road/ground level, fixed on ISMC series channel vertical post,
150 x 75 x 5 mm spaced 2 m centre to centre, 2 m high with 1.15
m below ground level, all steel parts and fitments to be
galvanised by hot dip process, all fittings to conform to IS:1367
and IS:1364, metal beam rail to be fixed on the vertical post with
a space of channel section 150 x 75 x 5 mm, 546 mm long
complete as per clause 811)
[32] Maintenance of flowering plants and shrubs in central verge for 2.00 Km 115672.27 231344.54
six months as per Running metres 200 plants and 800 shrubs in
two rows in one km length of road where width of verge is 3m
and above. (RA-11)
[33] Providing and fixing pre-cast Rubber Dye / steel Dye inter 8826.40 Sqm 706.90 6239382.16
locking concrete block 60mm thick with grade of concrete M300
pnumatic compressed / vibrated mechanically and as per
approved design Confirming to IS 15658 : 2006 including 35 mm
Sand layer for levelling and filling the joint with sand in proper
line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

[34] Providing & Fixing solar power road trafic flasher (24 hours 8.00 No. 7878.00 63024.00
operation) having 30c mm round light source , cluster of high
intencity ultra bright lead visibility greater than 500 mtrs red or
amber availabel or required. Falshing duty cycle 50% operation
for 24 hr. located 3.0 mt. above the ground level. design in line
with IS 7537 -1974 specification of road trafic. siganal solars
model 12V 20WP / 124 ,40W , battary 12 V 60Ah /12 V 110Ah
operating temperature 0 to 50 C , humidity 93% EH (NC)
complete with installation
[35] Providing and fixing lighting on steel hollow circular poles of 101.00 No. 32514.93 3284007.93
standard specifications on Main Road, 9 m high fixed on parapets
with cement concrete, 20 m and 40m apart and fitted with two
LED Light on two arms. (RA-8)
 Description of Item
Item Rates In
(with brief specification and reference to book of Quantities Unit Amount
No. Figures
specifications)

1 2 3 4 5 6
[36] Providing and fixing lighting on steel hollow circular poles of 201.00 No. 17942.65 3606472.65
standard specifications on Service Road, 5 m high fixed on
Footpath with cement concrete, 20 m and 40m apart and fitted
with one LED Light on one arm. (RA-9)
[37] Providing & fixing horizontal 50 x 25 x 4 mm pipe with 25 x 25 x 4012.00 Rmt 4857.09 19486645.08
2.6 mm vertical MS Pipe of 1 m height with 25 x 25 x 2.6 mm
vertical MS Pipe length of 0.25 m welded and embedded in
foundation base of M150 grade controlled concrete as gudied by
in charge as per drawing/ design including cost of erection and
painting
[38] Providing and laying 1.00 mm Thick HDPE Geomembrane 24674.00 Sqm 122.21 3015409.54
(Smooth). For layer separation of Median (RA-12)
[39] Excavation for foundation in sand, gravel, clay soft soils and 8558.88 Cum 526.15 4503249.58
murrum etc. including shoring, strutting dewatering as
necessary and disposing of the excavated stuff as directed.(A)
Depth upto 3.0 M. and lead upto 100m for 10 Cum

[40] Providing and casting in situ Ordinary cement concrete M-150 558.57 Cum 3743.35 2090924.63
for R.C.C. Raft and cut-off walls including necessary shuttering
laying, vibrating, ramming and curing complete.
[41] Providing and casting in situ controlled cement concrete M-200 1535.39 Cum 5167.05 7933435.21
for R.C.C. return as per drawings including centering shuttering,
scaffolding where necessary, laying vibrating, curing and
finishing complete.(A) Height from 0.0 to 5.0 M. (1) Piers (2)
Abutment (3) RCC return
[42] Supplying and fixing reinforced concrete heavy duty non- 720.00 Rmt 6621.26 4767305.04
pressure pipes with collars for culverts including setting and
joining the pipes in C.M. 1:2 watering and laying (To level of
slops of I.S. 458 / 1971 Class NP4 casted by vertically vibrated
technology of following internal diameter. 1200mm dia.

[43] Providing and laying in position FE 500D TMT bar reinforcement 364.74 MT 73858.69 26939368.58
including cutting, bending, hooking and tying complete as per
detailed drawings for the following.(A) Piers (B) Abutments (C)
R.C.C. Returns
[44] Providing & laying rubble for apron (each) stone weight not less 70.21 Cum 1071.51 75230.65
than 40 Kg including packing & filling in the instrestices with
qyarry spalls
[45] Numbering the C.D. Work with approved paint including all 12.00 No. 58.80 705.63
materials for paintings etc. complete
[46] Providing Yellow and Black Patta (three coat) including 229.59 Sqm 96.56 22168.29
distempeing (Three coats) with oil bound distemper of approved
brandand manufacture and of required shade on wall surfaces to
give an even shade , over and including a priming coat with
distemper primer of approved brand and manufacture after
thoroughly brushing the surface free from mortar dropping and
other foreign matter and also including preparing the surface
even and sand papered smooth as per instruction of Engineer
Incharge
[47] Dismentaling the existing structure including removing and 94.66 Cum 955.41 90439.06
stacking the dismentelled materials as and where directed. (A)
R.C.C. work
[48] Excavation for foundation in sand, gravel, clay soft soils and 2741.04 Cum 616.34 1689419.17
murrum etc. including shoring, strutting dewatering as
necessary and disposing of the excavated stuff as directed.(B)
Depth from 3.0 to 6.0 M.and lead upto 100m for 10 Cum

[49] Providing and casting in situ controlled cement concrete M-300 2057.40 Cum 5279.06 10861133.72
for R.C.C. return as per drawings including centering shuttering,
scaffolding where necessary, laying vibrating, curing and
finishing complete.(A) Height from 0.0 to 5.0 M. (1) Piers (2)
Abutment (3) RCC return
[50] Providing and casting in situ controlled cement concrete M-200 164.88 Cum 4559.84 751825.91
for R.C.C. return as per drawings including centering shuttering,
scaffolding where necessary, laying vibrating, curing and
finishing complete.(A) Height from 0.0 to 5.0 M. (1) Piers (2)
Abutment (3) RCC return
 Description of Item
Item Rates In
(with brief specification and reference to book of Quantities Unit Amount
No. Figures
specifications)

1 2 3 4 5 6
[51] Providing and casting in situ controlled cement concrete M-300 125.80 Cum 5388.59 677884.92
for average 75 mm thick wearing coat laid as directed dincluding
tamping, vibrating, finishing, curing and fillingin joints with
bitumen complete
[52] Providing RCC Crash Barriers of Design mix concrete M40 mix as 31.06 Cum 5131.67 159389.63
per detailed drawing and design including shutterin, laying,
vibrating and three coats of cement wash and givving a perfect
smooth finishing to line and level, etc. complete
[53] Providing and casting in-situ Ordinary Cement Concrete M15 for 54.41 Cum 3799.83 206748.86
approach slab including formwork, curing and finishing
complete.
[54] Providing and casting in-situ Controlled Cement Concrete M30 108.00 Cum 5246.75 566648.78
for approach slab including formwork curing and finishing
complete.
[55] Providing Pre-moulded asphalt filler joints as per drawings.(A) 24.00 Sqm 703.53 16884.61
12mm
[56] Providing and laying weep hole in abutmemt and returning by 240.00 No. 89.20 21408.77
using A.C. pipes / PVC Pipe of 100 mm. Diameter including
laying in priper grade and joining etc. comp as per detailed
specifications.
[57] Providing and laying filter media 600 mm thick directed at the 240.00 Sqm 1262.74 303058.18
back of abutments and returns and wing walls as per detailed
specifications
[58] Providing & laying rubble for apron (each) stone weight not less 484.16 Cum 1071.51 518781.80
than 40 Kg including packing & filling in the instrestices with
qyarry spalls
[59] Providing and fixing 20 cm. x 15 cm x 2.5 cm. thick year plate of 2.00 No. 279.69 559.38
marble stone set in C.M. 1:4 including finishing and engraving
letters etc. complete
[60] Providing Rubble pitching of 300 mm. average thickness 144.36 Sqm 1350.37 194939.41
including pointing mortar with C.M.1 : 3 (1 cement : 3 sand) etc.
complete
[61] Providing Yellow and Black Patta (three coat) including 252.92 Sqm 96.56 24420.94
distempeing (Three coats) with oil bound distemper of approved
brandand manufacture and of required shade on wall surfaces to
give an even shade , over and including a priming coat with
distemper primer of approved brand and manufacture after
thoroughly brushing the surface free from mortar dropping and
other foreign matter and also including preparing the surface
even and sand papered smooth as per instruction of Engineer
Incharge
[62] Excavation for foundation upto 1.5 m depth including sorting out 13842.00 Cum 255.56 3537461.52
and stacking of useful materials and disposing off the excavated
stuff at all lead and lift.(B) Dense or Hard soil.
[63] Providing and filling in foundation with cement concrete M 100 1386.00 Cum 3341.44 4631235.84
mix and providing necessary vertical pin headers including
formwork,vibrating,ramming and curing complete. (more than
10Tonne)
[64] Providing and filling in foundation with cement concrete M 150 4194.00 Cum 3697.13 15505763.22
mix and providing necessary vertical pin headers including
formwork,vibrating,ramming and curing complete. (more than
10Tonne)
[65] Provding P.V.C. 100 mm diameter water spouts including 270.00 No. 159.37 43029.90
necessary iron gratings as per drawings.
[66] Constructing R.C.C chamber for underground Inspection 80.00 No. 35999.43 2879954.40
chamber and R.C.C. cover R.C.C.top slab with 1: 2 : 4 mix (1
Cement :2 coarese sand : 4 grade stone aggregate 20 mm size)
foundation concrete 1 : 3 : 6 inside plaster 15 mm thick with
cement mortar 1 : 3 finished smooth with a floating coat of neat
cement on walls and bed concerete etc. complete. (iii) Inside
dimesnsions 1700 mm X1700mm and for 900mm Dia. pipe lines.

[67] Supplying and fixing reinforced concrete heavy duty non- 800.00 Rmt 659.99 527992.00
pressure pipes with collars for culverts including setting and
joining the pipes in C.M. 1:2 watering and laying (To level of
slops of I.S. 458 / 1971 Class NP3 casted by vertically vibrated
technology of following internal diameter. (iv) 300 mm dia.
 Description of Item
Item Rates In
(with brief specification and reference to book of Quantities Unit Amount
No. Figures
specifications)

1 2 3 4 5 6
[68] Dismentaling the existing structure including removing and 544.13 Cum 955.41 519871.33
stacking the dismentelled materials as and where directed. (A)
R.C.C. work
[69] Planting Flowering Plants and Shrubs in Central Verge including 2.00 Km 57874.01 115748.02
excavating & maintaning plants with watering/ fertilising with
all material & labour as directed by Engineer incharge.

Total : 322075685.39

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of the estimated
rate mentioned above. Amount of my /our tender works out as under.
Estimated Amount put to tender Estimated Amount put to tender
Deduct …............................. % Below Add …............................. % Above
Net Net
In Words In Words
Note:‐
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be
made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017
as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted
from the rate of original item at the rate of input rate mentioned in all the tender.
5. Credit of materials of Diversion and HP Drain Head Wall amount of Rs. 356308.00 must be recovered from Contractor's ............ R.A Bill.

Dated Signature Deputy Executive Engineer Executive Engineer