V01_19.01.
2023
PURe® SLIDE Lift & Slide
Door System
Technical Datasheet
Scope
The PURe® SLIDE Lift & Slide door system has been
designed to meet current and future building regulations, with
impressive U-values and thermal performances. PURe® is an
evolved generation of aluminium window and door systems
manufactured in the UK. It combines the long life and low
maintenance of aluminium with a patented high insulation
PUR foam thermal barrier. PURe® SLIDE Lift and Slide doors *Image for indicative
purposes only
are capable of accepting glazing up to 52mm thick.
Materials
• Extruded aluminium is generally Aluminium Alloy 6060.T6/ Typical Sizes
T66, 6063.T6/T66, 6082.T6 to BS EN 755-9 and EN Max door leaf width 3005mm
12020-2. Max door leaf height 2916mm
Max outerframe height 3000mm
• Polyamide thermal barriers are manufactured in
accordance with PA66 GF25. Max weight per door leaf (standard) 200kg
Max weight per door leaf (heavy duty) 300kg
• The Gasketry is generally manufactured in accordance with Max frame width Project Specific
BS ISO 3302-1. *Average U-values
CEN standard (Double Glazed) 1.4 W/m²K
• The fixings are generally A2 Stainless Steel screws.
CEN standard (Triple Glazed) 0.95 W/m²K
Glazing
Thickness 28mm - 52mm
Finishes Testing
PURe® SLIDE Lift & Slide door sections are available typically Security PAS24 & SBD
in two finishes. **BS6375 -1 ✓
• Polyester Powder Coating to BS EN 12206-1 Part 1 BS6375 - 2 ✓
painted in house. Surface finished to a minimum of 40 Acoustics
microns standard, or enhanced to suit project
requirements, in accordance with ISO 9001, ISO 14001 Acoustics performance (IGU Dependent) 34dB reduction is achievable
and ISO 45001.
*All calculations are based on CEN sized single doors 1230mm x 2180mm ±25% and double door 2000mm x 2180mm
±25%.
• Anodised finishes are to BS3897 to a minimum of 25
** Results may vary based on specification. Further details are available upon request.
microns (AA25), supplied in either satin or polished
finish in a limited range of colours. Test certifications available upon request.
Construction
PURe® is constructed using mitred corners and joined with
mechanical cleats and screwports; alignment chevrons assist in
clean, accurate mitres. A proprietary sealant is used on all metal
joints in line with good practice. Automation solutions are also
available.
Environmental
Senior Architectural Systems is fully compliant with BS EN ISO
9001, BS EN ISO 14001, ISO 45001 and BES6001 standards.
When used on projects involved in a BREEAM assessment, or
within the Code for a Sustainable Built Environment, (which
therefore involves the Green Guide specification) can offer
significant benefits. For project specific assistance, please
contact our specification team.
BFRC B
Senior Architectural Systems Ltd, Eland Road, Denaby Main, Doncaster, South Yorkshire, DN12 4HA.
Tel: 01709 772 600 E-mail: [email protected] www.seniorarchitectural.co.uk
Due to a policy of continual product development, Senior Architectural Systems reserves the right to alter any of the specifications given in
this publication without prior notice. The specification for any given application must be checked with Senior Architectural Systems prior to
manufacture. No responsibility for accuracy is accepted by Senior Architectural Systems. Always refer to the Technical Manual.
