V01_19.01.
2023
PURe® Commercial
Door System
Technical Datasheet
Scope
The PURe® commercial door system has been designed to
meet current and future building regulations, with impressive
U-values and thermal performances. PURe® is an evolved
generation of aluminium window and door systems
manufactured in the UK. It combines the long life and low *Image for indicative
purposes only
maintenance of aluminium with a patented high insulation
PUR foam thermal barrier. PURe® commercial doors are
capable of accepting glazing up to 60mm thick.
Typical Sizes
Standard
Materials Max door leaf width 1400mm
• Extruded aluminium is generally Aluminium Alloy 6060.T6/ Max door leaf height 3000mm
T66, 6063.T6/T66, 6082.T6 to BS EN 755-9 and EN Max weight per door leaf 180kg
12020-2. Electronic Locking
• Polyamide thermal barriers are manufactured in Max door leaf width 1400mm
accordance with PA66 GF25. Max door leaf height 2500mm
Max weight per door leaf 180kg
• The Gasketry is generally manufactured in accordance with Panic Exit
BS ISO 3302-1. Max door leaf width 1350mm
• The fixings are generally A2 Stainless Steel screws. Max door leaf height 2500mm
Max weight per door leaf 180kg
*Average U-values
Single Door
Finishes CEN standard (Double Glazed) 1.3 W/m²K
CEN standard (Triple Glazed) 0.94 W/m²K
PURe® Commercial door sections are available typically in two
finishes. Double Door
CEN standard (Double Glazed) 1.3 W/m²K
• Polyester Powder Coating to BS EN 12206-1 Part 1 CEN standard (Triple Glazed) 0.89 W/m²K
painted in house. Surface finished to a minium of 40
microns standard, or enhanced to suit project Glazing
requirements, in accordance with ISO 9001, ISO 14001 Thickness 28mm - 60mm
and ISO 45001. Testing
• Anodised finishes are to BS3897 to a minimum of 25 Security PAS24 & SBD
microns (AA25), supplied in either satin or polished **BS6375 -1 ✓
finish in a limited range of colours. BS6375 - 2 ✓
Acoustics
Acoustics performance (IGU Dependent) 38dB reduction is achievable
Construction
*All calculations are based on CEN sized single doors 1230mm x 2180mm ±25% and double door 2000mm x
2180mm ±25%.
PURe® is constructed using mitred corners and/or shear blocks, **Results may vary based on specification. Further details are available upon request.
joined with crimped or mechanical cleats; alignment chevrons
Test certifications available upon request.
assist in clean, accurate mitres. A proprietary sealant is used on
all metal joints in line with good practice. Automatic solutions are
also available.
Environmental
Senior Architectural Systems is fully compliant with BS EN ISO
9001, BS EN ISO 14001, ISO 45001 and BES6001 standards.
When used on projects involved in a BREEAM assessment, or
within the Code for a Sustainable Built Environment, (which
therefore involves the Green Guide specification) can offer
significant benefits. For project specific assistance, please
contact our specification team.
Senior Architectural Systems Ltd, Eland Road, Denaby Main, Doncaster, South Yorkshire, DN12 4HA.
Tel: 01709 772 600 E-mail: [email protected] www.seniorarchitectural.co.uk
Due to a policy of continual product development, Senior Architectural Systems reserves the right to alter any of the specifications given in
this publication without prior notice. The specification for any given application must be checked with Senior Architectural Systems prior to
manufacture. No responsibility for accuracy is accepted by Senior Architectural Systems. Always refer to the Technical Manual.
