V01_19.01.
2023
SPW600e
Door System
Technical Datasheet
Scope
The SPW600e door system has been designed to provide
an enhanced performance door capable of being
manufactured in single, double, inward or outward opening
and utilising low thresholds producing a variety of options to
suit most applications. It is a 75mm thermally broken
polyamide door system achieving improved thermal
performance. They can accept glazing up to 56mm thick.
*Image for indicative
Materials purposes only
• Extruded aluminium is generally Aluminium Alloy 6060.T6/
T66, 6063.T6/T66, 6082.T6 to BS EN 755-9 and EN
12020-2.
• The Gasketry is generally manufactured in accordance with
BS ISO 3302-1. Typical Sizes
Max door leaf width 1000mm
• The fixings are generally A2 Stainless Steel screws.
Max door leaf height 2400mm
Max door leaf weight 75kg
*Average U-values
Single Doors
Finishes CEN standard (Double Glazed) 1.4 W/m²K
SPW600e door sections are available typically in three finishes. CEN standard (Triple Glazed) 1.0 W/m²K
Double Doors
• Polyester Powder Coating to BS EN 12206-1 Part 1
painted in house. Surface finished to a minimum of 40 CEN standard (Double Glazed) 1.3 W/m²K
microns standard, or enhanced to suit project CEN standard (Triple Glazed) 0.95 W/m²K
requirements, in accordance with ISO 9001, ISO 14001
and ISO 45001. Glazing
Thickness 28mm - 56mm
• Anodised finishes are to BS3897 to a minimum of 25 Testing
microns (AA25), supplied in either satin or polished
finish in a limited range of colours. Security PAS24 & SBD
• Mill Finish.
**BS6375 - 1 ✓
BS6375 - 2 ✓
Construction *All calculations are based on CEN sized single doors 1230mm x 2180mm ±25% and double door 2000mm x
2180mm ±25%.
SPW600e is constructed using mitred corners, joined with **Results may vary based on specification. Further details are available upon request.
Crimped cleats; alignment chevrons assist in clean, accurate Test certifications available upon request.
mitres. Integral transoms and mullions are scribed around
the outer frames and fixed with either screw ports or shear
blocks. A proprietary sealant is used on all metal joints in
line with good practice.
Environmental
Senior Architectural Systems is fully compliant with BS EN ISO
9001, BS EN ISO 14001, ISO 45001 and BES6001 standards.
When used on projects involved in a BREEAM assessment, or
within the Code for a Sustainable Built Environment, (which
therefore involves the Green Guide specification) can offer
significant benefits. For project specific assistance, please
contact our specification team.
Senior Architectural Systems Ltd, Eland Road, Denaby Main, Doncaster, South Yorkshire, DN12 4HA.
Tel: 01709 772 600 E-mail: [email protected] www.seniorarchitectural.co.uk
Due to a policy of continual product development, Senior Architectural Systems reserves the right to alter any of the specifications given in
this publication without prior notice. The specification for any given application must be checked with Senior Architectural Systems prior to
manufacture. No responsibility for accuracy is accepted by Senior Architectural Systems. Always refer to the Technical Manual.
