Scribd
Upload
82 views1 page

TAF1!03!002-WPPCO-TS0-HSE-ForM-0003Portable Power Tools and Equipment Inspection Checklist

The document is a Portable Power Tools and Equipment Inspection Checklist used to assess the safety and operational condition of power tools at a project site. It includes a series of questions regarding the tools' condition, safety features, and proper usage, with space for remarks. The inspection is to be conducted by an HSE representative and acknowledged by a project manager or engineer.

Uploaded by

Gee Mart
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
82 views1 page

TAF1!03!002-WPPCO-TS0-HSE-ForM-0003Portable Power Tools and Equipment Inspection Checklist

The document is a Portable Power Tools and Equipment Inspection Checklist used to assess the safety and operational condition of power tools at a project site. It includes a series of questions regarding the tools' condition, safety features, and proper usage, with space for remarks. The inspection is to be conducted by an HSE representative and acknowledged by a project manager or engineer.

Uploaded by

Gee Mart
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Project Name: Date of Inspection:

Project Location: Model:


Equipment Name and Number: Doc. Ref. No.:
Portable Power Tools and Equipment Inspection Checklist

Note: Put check mark on the column provided if Yer or No and some comments on the remark’s column.
SR
Description Yes No N/A Remarks
No.
1 Correct tools provided and in use for each operation?
2 Power tools in good condition?
3 Operational switches functioning properly?
4 Constant contact switches on drills, sanders, grinders, saws, etc.as required?
5 Warning labels or markings showing hazardous areas intact?
6 Power tools double insulated or properly grounded?
7 GFCI or assured grounding program in place when using temporary power?
8 Electrical cords in good condition, no cuts, no tape and ground pin in place?
9 Power tools kept away from wet locations?
10 Power tools not lifted or lowered by electrical cord?
11 Tools stored in dry, secure place to avoid damage and tampering?
12 Circular saws guarded and no tie back or wedging open of the guard?
13 Blades and cutting edges sharp to prevent binding or skipping?
14 Portable equipment is in good operating condition?
Guards are in place, properly adjusted and in good condition for all moving parts and
16
drive?
17 Operators properly attired (no loses clothing or jewelry)?
Inspected By: HSE Acknowledged By:PM/Engr.
Name Name
Signature Signature

Doc. Ref. No.: TAF1-03-002-WPPCO-TS0-HSE-FORM-0003


REV. 01

You might also like