TECHNICAL DATA SHEET

BEGER COOL DIAMOND SHIELD 15 YEARS

Super Altra Premium 100% Acrylic Emulsion Paint (Semi-Gloss) : For Exterior and Interior
Description Beger Cool Diamond Shield 15 Years is formulated from high quality 100% pure acrylic and insulating hollow microspheres ceramic that
resists thermal to the paint film and significantly reduce heat transfer compare to the traditional paint. And combined with UV Silicone
Cross Link Technology for UV Protection with special acrylic polymer licence only Beger, and it improve film reaction in Cross Link
Peaction for strong film and molecule paint of high penetrate in substrate for long lasting resistance, allows moisture vapor to escape from
the substrate (Breathable Film) and good resistance to algae, fungus mildew and mold attack.
No added lead, no added mercury and environemental safe.
Feature and Benefits * Solar heat will be reflected out from the paint film more than 3 times of traditional emulsion paint.
* To reduce temperature approx. 3 - 5 °C and eletric energy cost saving more than 25% compared to traditional paint.
* Total UV blocking and IR protects, good fading and chalking resistant.
* Good resistant to water stain, oil stain and dirt stain with advanced Nano Silicone Technology.
* Waterproof, but still allows moisture vapor to escape from the substrate with Siloxane.
* Protect paint film peeling with Cross Link Technology.
* Ultra hiding with Super Titanium from DuPont Ti-Pure Titanium Dioxide.
* Durable weather proofing.
Good resistance to algae, fungus mildew and mold attack.
Application Area Beger Cool Diamond Shield 15 Years (Semi-Gloss) use as a topcoat on all surfaces such as cements, concretes, fiber cements,
bricks suitable for interior and exterior works.
Film Thickness and Spreading Rate Minimum Maximum Typical
* Dry film thickness (microns) 30 40 35
* Wet film thickness (microns) 90 110 100
* Theoretical coverage rate (m2/gallon) 35 40 Actual consumption rate depends on
application method and surface condition.
Physical Properties
* Vehicle type : Pure Acrylic 100% Emulsion Paint
* Finish : Semi-gloss
* Colour : According to the "Beger Colour Cards"
* Solid by volume : 29 - 31%
* Dry time (@25'c)
Touch Dry 20 minutes
Recoat : 2 - 4 hours
Dry to handle : 4 - 6 hours
* Flash point : None
Application Method
* Tool : Brush, roller or spray gun.
* Thinner : Clean water.
* Condition during application : The moisture content in the concrete should not exceed 14%.
: Concrete and masonry cure at least 30 days before coating.
: Application by roller or brush dilute with 5 - 10% clean water by volume.
: Application by spray gun dilute with 15 - 25% clean water by volume.
Application System
* Surface preperation : Surface should be dry and clean. Remove completely all dirt, grease, oil, or any contaminated by washing surface with suitable cleaner.
: Surface with fungus, mold and mildew growth must be cleaned off and follow by the treatment of fungicidal wash Beger Mouldfree #M-001.
: Repair all surface imperfections. Before application, fill and seal hairline cracks by working a generous amount of material into void. Cracks
and gaps wider than 2.0 - 10.0 mm. should be filled with acrylic sealant. Use Beger Acrylic Wall Filler #F-200 for cracks and gaps with less
than 0.3 - 1.0 mm. width. Stir content thoroughly before and during application.
: New Masonry Substrate
* Primer : Beger Cool Insulating Primer #6000 for exterior and interior. 1 coat
* Typical paint system or Beger Cool Flex Elastomeric Primer #9000 for better solar heat insulation and reflection. 1-2 coat
* Topcoat : Beger Cool Diamond Shield 15 Years (Semi-Gloss) 2-3 coat
: Previously Painted Surfaces
* Primer : Beger Pro Quick Primer #B-1900 1 coat
or Beger Cool Flex Elastomeric Primer #9000 for better solar heat insulation and reflection. 1-2 coat
* Topcoat : Beger Cool Diamond Shield 15 Years (Semi-Gloss) 2-3 coat
Environmentally Friendly Tips : Do not mix paints for storage or disposal. Leave paint in the original container.
: Do not throw liquid paint in the trash or pour it down the drain.
: Small amounts of latex paint can be air-dried and disposed through your trash collection system.
Storage : The product must be stored in accordance with national regulations. Storage conditions are to keep the containers in a dry,
cool, well ventilated space and away form source of heat an ignition.
: Containers must be kept tightly closed.
: 36 months at ambient.
Health and safety : Use under well ventilated conditions.
: Do not breathe or inhale mist.
: Avoid skin contact. Spillage on the skin should immediately be removed with suitable cleanser, soap and water.
: Eyes should be well flushed with water and medical attention sought immediately.
Precaution : Keep out of reach of children.
Reference Standard : Thai Industrial Standard : TIS 2321 - 2549 (Durable Emulsion Paint) & TIS 2514 - 2553
Packing Size : 3.5 Litres, and 9 Litres.
DISCLAIMER TECHNICAL DATA SHEET:
The information in this data sheet is given to the best of our knowledge based on laboratory testing and Edition : 3 October 2018_RDI
practical experience. However, as the product is often used under conditions beyond our control, we cannot Page : 1 to 1
guarantee anything but the quality of the product itself. We reserve the right to change the given data without BEGER COOL DIAMOND SHIELD 15 YEARS
notice.